fyb/p4tutorials-turkce
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix links in markdown files

Browse Source
This commit is contained in:
Antonin Bas
2017-06-01 11:29:02 -07:00
parent 6b546481a5
commit 30ecf6fc07
10 changed files with 68 additions and 70 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
examples/meter/README.md
View File

@@ -3,8 +3,8 @@
## Description
This program illustrates as simply as possible how to use meters in P4 with
bmv2. bmv2 uses two-rate three-color meters as described [here]
(https://tools.ietf.org/html/rfc2698).
bmv2. bmv2 uses two-rate three-color meters as described
[here](https://tools.ietf.org/html/rfc2698).
For each incoming packet the `m_table` table is applied and the appropriate
meter (based on the packet's source MAC address) is executed. Based on the
@@ -17,16 +17,15 @@ to port 2 of the switch.
After that, the packet will go through a second table, `m_filter`, which can
either be a no-op or drop the packet based on how the packet was tagged by the
meter. If you take a look at the [runtime commands] (commands.txt) we wrote for
meter. If you take a look at the [runtime commands](commands.txt) we wrote for
this example, you will see that we configure the table to drop all the packets
for which the color is not *GREEN* (i.e. all packets for which `meta.meter_tag`
is not `0`).
The [commands.txt] (commands.txt) file also gives you the meter
configuration. In this case, the first rate is 0.5 packets per second, with a
burst size of 1, and the second rate is 10 packets per second, with a burst size
of 1 also. Feel free to play with the numbers, but these play nicely with the
demonstration below.
The [commands.txt](commands.txt) file also gives you the meter configuration. In
this case, the first rate is 0.5 packets per second, with a burst size of 1, and
the second rate is 10 packets per second, with a burst size of 1 also. Feel free
to play with the numbers, but these play nicely with the demonstration below.
Note that we use an `indirect` meter array, because `direct` ones are not
supported yet by bmv2.
@@ -35,9 +34,9 @@ supported yet by bmv2.
We provide a small demo to let you test the program. It consists of the
following scripts:
- [run_switch.sh] (run_switch.sh): compile the P4 program and starts the switch,
also configures the data plane by running the CLI [commands] (commands.txt).
- [send_and_receive.py] (send_and_receive.py): send packets periodically on port
- [run_switch.sh](run_switch.sh): compile the P4 program and starts the switch,
also configures the data plane by running the CLI [commands](commands.txt).
- [send_and_receive.py](send_and_receive.py): send packets periodically on port
0 and listen for packets on port 2.
To run the demo: