# SPDX-License-Identifier: LicenseRef-CSSL-1.0

#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
#   Valid for RHEL9
#
#---------------------------------------------------------------------

FROM ran-base:latest AS phy-sim-build

RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .

#only install address and undefined behavior sanitizer for this container, the others don't need it
RUN dnf install -y libasan libubsan

#run build_oai to build the target image
RUN /bin/sh oaienv && \ 
    mkdir -p cmake_targets/ran_build/build && \
    cd cmake_targets/ran_build/build && \
    cmake3 -GNinja ../../.. \
        -DAVX512=OFF -DCMAKE_C_FLAGS=-Werror -DCMAKE_CXX_FLAGS=-Werror \
        -DENABLE_PHYSIM_TESTS=ON \
        -DSANITIZE_ADDRESS=ON -DSANITIZE_UNDEFINED=ON \
        -DT_TRACER=OFF \
        -DCMAKE_RUNTIME_OUTPUT_DIRECTORY=/opt/oai-physim/bin && \
    ninja -k10 -j36

#start from scratch for target executable
FROM registry.redhat.io/ubi9/ubi:latest AS oai-physim

RUN dnf update -y && \
    dnf install -y \
        lksctp-tools \
        tzdata \
        libgfortran \
        hostname \
        sudo \
        procps-ng \
        net-tools \
        iputils \
        cmake \
        bc \
        iproute && \
    echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
    echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf

WORKDIR /opt/oai-physim/bin
COPY --from=phy-sim-build /opt/oai-physim/bin/ /opt/oai-physim/bin/

COPY --from=phy-sim-build \
    /oai-ran/cmake_targets/ran_build/build/libcoding.so \
    /usr/lib64/libasan.so.6 \
    /usr/lib64/libubsan.so.1 \
    /oai-ran/cmake_targets/ran_build/build/libdfts.so \
    /oai-ran/cmake_targets/ran_build/build/libldpc*.so \
    /usr/local/lib/

RUN ldconfig && \
    echo "---- ldd on physim executables ----" && \
    ldd /opt/oai-physim/bin/dlsim \
        /opt/oai-physim/bin/nr_dlsim \
        /opt/oai-physim/bin/nr_prachsim \
        /opt/oai-physim/bin/nr_ulschsim \
        /opt/oai-physim/bin/polartest \
        /opt/oai-physim/bin/ulsim \
        /opt/oai-physim/bin/ldpctest \
        /opt/oai-physim/bin/nr_dlschsim \
        /opt/oai-physim/bin/nr_pbchsim \
        /opt/oai-physim/bin/nr_psbchsim \
        /opt/oai-physim/bin/nr_pucchsim \
        /opt/oai-physim/bin/nr_ulsim \
        /opt/oai-physim/bin/smallblocktest && \
    echo "---- ldd on shared libraries ----" && \
    ldd /usr/local/lib/libcoding.so \
        /usr/local/lib/libdfts.so \
        /usr/local/lib/libldpc*.so

# Copy the relevant configuration files for phySim
WORKDIR /opt/oai-physim/

COPY --from=phy-sim-build \
    /oai-ran/cmake_targets/ran_build/build/openair1/SIMULATION/tests/CTestTestfile.cmake \
    /opt/oai-physim/

RUN mkdir -p /oai-ran/openair1/SIMULATION/tests

COPY --from=phy-sim-build \
    /oai-ran/openair1/SIMULATION/tests/RunTimedTest.cmake \
    /oai-ran/openair1/SIMULATION/tests/analyze-timing.sh \
    /oai-ran/openair1/SIMULATION/tests/

#CMD ["sleep", "infinity"]