Files
openairinterface5g/docker/Dockerfile.gNB.fhi72.rocky
Sagar Arora 662c6e1aec Install yaml-cpp-dev for CU-UP and rocky
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Signed-off-by: Sagar Arora <sagar.arora@openairinterface.org>
2025-11-28 16:48:08 +01:00

123 lines
4.3 KiB
Docker

#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface 7.2 Fronthaul
# Valid for Rocky 9
#
#---------------------------------------------------------------------
FROM ran-base:latest AS gnb-base
FROM ran-build-fhi72:latest AS gnb-build
#start from scratch for target executable
FROM docker.io/rockylinux:9 AS oai-gnb-fhi72
ENV TZ=Europe/Paris
RUN dnf update -y && \
dnf install -y \
procps-ng \
libXpm \
libX11 \
lksctp-tools \
xz \
numactl-libs \
numactl-devel \
pkg-config \
pciutils \
tzdata \
gdb \
python3 \
python3-pip \
net-tools \
iputils \
yaml-cpp-devel && \
pip3 install six && \
pip3 install requests && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-gnb/bin
COPY --from=gnb-build \
/oai-ran/cmake_targets/ran_build/build/nr-softmodem ./
COPY ./docker/scripts/gnb_entrypoint.sh ./entrypoint.sh
COPY ./docker/scripts/check-prach-io.sh ./check-prach-io.sh
COPY --from=gnb-build \
/oai-ran/cmake_targets/ran_build/build/librfsimulator.so \
/oai-ran/cmake_targets/ran_build/build/liboran_fhlib_5g.so \
/oai-ran/cmake_targets/ran_build/build/liboai_transpro.so \
/oai-ran/cmake_targets/ran_build/build/libcoding.so \
/oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \
/oai-ran/cmake_targets/ran_build/build/libdfts.so \
/oai-ran/cmake_targets/ran_build/build/libldpc*.so \
/oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \
/oai-ran/cmake_targets/ran_build/build/libtelnetsrv_ci.so \
/oai-ran/cmake_targets/ran_build/build/libparams_yaml.so \
/usr/local/lib/
## Libxran library
COPY --from=gnb-build \
/opt/phy/fhi_lib/lib/build/libxran.so \
/opt/phy/fhi_lib/lib/build/
## Copy all DPDK libraries as liboran_fhlib_5g.so require most of them
COPY --from=gnb-build /usr/local/lib64/ /usr/local/lib64/
## Copy E2 SM models
COPY --from=gnb-build /usr/local/lib64/flexric /usr/local/lib64/flexric
# Copying file for configuration module
COPY --from=gnb-base \
/lib64/libconfig.so.11 \
/lib64/libforms.so.2 \
/lib64/libblas.so.3 \
/lib64/libcblas.so.3 \
/lib64/liblapack.so.3 \
/lib64/liblapacke.so.3 \
/lib64/libicudata.so.67 \
/lib64/libicui18n.so.67 \
/lib64/libicuuc.so.67 \
/lib64/
RUN ldconfig && \
echo "---- ldd on executable nr-softmodem ----" && \
ldd /opt/oai-gnb/bin/nr-softmodem && \
echo "---- ldd on shared libraries ----" && \
ldd /usr/local/lib/librfsimulator.so \
/usr/local/lib/liboran_fhlib_5g.so \
/usr/local/lib/liboai_transpro.so \
/usr/local/lib/libcoding.so \
/usr/local/lib/libparams_libconfig.so \
/usr/local/lib/libdfts.so \
/usr/local/lib/libldpc*.so \
/usr/local/lib/libtelnetsrv.so \
/usr/local/lib/libtelnetsrv_ci.so \
/opt/phy/fhi_lib/lib/build/libxran.so
WORKDIR /opt/oai-gnb
COPY --from=gnb-base /usr/local/bin/yq /usr/local/bin/yq
COPY --from=gnb-base /tini /tini
ENTRYPOINT ["/tini", "-v", "--", "/opt/oai-gnb/bin/entrypoint.sh"]
CMD ["/opt/oai-gnb/bin/nr-softmodem"]