yigid/openairinterface5g
1
0
Fork 0
mirror of https://gitlab.eurecom.fr/oai/openairinterface5g.git synced 2026-07-13 04:30:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
15df30545ee9c9c6cb2eb0ba4b4397183fa708eb
openairinterface5g/cmake_targets/tools/build_helper
yilmazt 15df30545e converting 'lte_build_oai' to 'ran_buld'
2019-07-23 15:24:03 +02:00

871 lines
26 KiB
Plaintext
Executable File
Raw Blame History

#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
# file build_helper
# brief
# authors Laurent Thomas, Lionel GAUTHIER
#
#######################################
if [ ! -f /etc/os-release ]; then
echo "No /etc/os-release file found. You're likely on an unsupported distro."
exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
rhel) OS_BASEDISTRO="fedora"; INSTALLER="yum --skip-broken"; CMAKE="cmake3" ;;
centos) OS_BASEDISTRO="fedora"; INSTALLER="yum --skip-broken"; CMAKE="cmake3" ;;
debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)
SUDO='sudo -E'
###############################
## echo and family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[1;34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1
cecho() {
# Color-echo
# arg1 = message
# arg2 = color
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
[ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
echo -e "$message"
return
}
echo_error() { cecho "$*" $red ;}
echo_fatal() { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow ;}
echo_success() { cecho "$*" $green ;}
echo_info() { cecho "$*" $blue ;}
########################
# distribution helpers #
########################
# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
# ubuntu16.04
# debian8.5
get_distribution_release() {
if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
echo "$OS_DISTRO$OS_RELEASE"
else
echo Unknown
fi
}
check_supported_distribution() {
local distribution=$(get_distribution_release)
case "$distribution" in
"ubuntu18.04") return 0 ;;
"ubuntu17.10") return 0 ;;
"ubuntu17.04") return 0 ;;
"ubuntu16.04") return 0 ;;
"ubuntu14.04") return 0 ;;
"fedora24") return 0 ;;
"rhel7") return 0 ;;
"rhel7.6") return 0 ;;
"centos7") return 0 ;;
esac
return 1
}
##################
# Error handlers #
##################
handler_EXIT() {
local exit_code=$?
[ "$exit_code" -eq 0 ] || echo_error "build have failed"
exit $exit_code
}
trap handler_EXIT EXIT
###########################
# Cleaners
###########################
clean_kernel() {
$SUDO modprobe ip_tables
$SUDO modprobe x_tables
$SUDO iptables -P INPUT ACCEPT
$SUDO iptables -F INPUT
$SUDO iptables -P OUTPUT ACCEPT
$SUDO iptables -F OUTPUT
$SUDO iptables -P FORWARD ACCEPT
$SUDO iptables -F FORWARD
$SUDO iptables -t nat -F
$SUDO iptables -t mangle -F
$SUDO iptables -t filter -F
$SUDO iptables -t raw -F
echo_info "Flushed iptables"
$SUDO rmmod nasmesh > /dev/null 2>&1
$SUDO rmmod oai_nw_drv > /dev/null 2>&1
$SUDO rmmod openair_rf > /dev/null 2>&1
$SUDO rmmod ue_ip > /dev/null 2>&1
echo_info "removed drivers from kernel"
}
clean_all_files() {
set_openair_env
dir=$OPENAIR_DIR/cmake_targets
rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
rm -rf $dir/ran_build $dir/lte-simulators/build
rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
}
###################################
# Compilers
###################################
#check_warnings:
# print error message if the compilation had warnings
#argument:
# $1: log file
check_warnings() {
#we look for 'warning:' in the compilation log file
#this is how gcc starts a warning
#this is not perfect, we may get false positive
warning_count=`grep "warning:" "$1"|wc -l`
if [ $warning_count -gt 0 ]; then
echo_error "WARNING: $warning_count warnings. See $1"
fi
}
compilations() {
cd $OPENAIR_DIR/cmake_targets/$1/build
set +e
{
rm -f $3
if [ "$BUILD_COVERITY_SCAN" == "1" ]; then
COV_SCAN_PREFIX="cov-build --dir cov-int"
else
COV_SCAN_PREFIX=""
fi
if [ "$VERBOSE_COMPILE" == "1" ]; then
$COV_SCAN_PREFIX make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
else
$COV_SCAN_PREFIX make -j`nproc` $2
fi
} > $dlog/$2.$REL.txt 2>&1
set -e
echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
if [ -s $3 ] ; then
cp $3 $4
echo_success "$2 compiled"
check_warnings "$dlog/$2.$REL.txt"
else
echo_error "$2 compilation failed"
exit 1
fi
}
############################################
# External packages installers
############################################
install_protobuf_from_source(){
protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
(
cd /tmp
echo "Downloading protobuf"
#rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
#wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
#tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
#cd protobuf-2.6.1/
rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
wget https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
cd protobuf-3.3.0/
./configure
echo "Compiling protobuf"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
) >& $protobuf_install_log
}
install_protobuf_c_from_source(){
protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
(
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
fi
cd /tmp
echo "Downloading protobuf-c"
rm -rf /tmp/protobuf-c
git clone https://github.com/protobuf-c/protobuf-c.git
cd protobuf-c
git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
./autogen.sh
./configure
echo "Compiling protobuf-c"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
) >& $protobuf_c_install_log
}
install_usrp_uhd_driver_from_source(){
uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
(
cd /tmp
echo "Downloading UHD driver"
rm -rf /tmp/uhd
git clone https://github.com/EttusResearch/uhd.git
cd uhd
git checkout tags/v3.13.0.2
mkdir -p host/build
cd host/build
$CMAKE ../
echo "Compiling UHD"
make -j`nproc`
make test
$SUDO make install
$SUDO ldconfig
) >& $uhd_install_log
}
check_install_usrp_uhd_driver(){
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
#first we remove old installation
$SUDO apt-get remove -y uhd || true
$SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y || true
v=$(lsb_release -cs)
$SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
# The new USRP repository
# Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
# timeout due to proxy / network latencies in Eurecom on VM
echo_info "\nAdding PPA repository ettusresearch/uhd\n"
x=0
while [ $x -le 5 ]
do
if $SUDO add-apt-repository ppa:ettusresearch/uhd -y
then
echo_info "add-apt-repository successful\n"
break
else
echo_info "add-apt-repository failed, retrying...\n"
sleep 30
fi
x=$((x + 1))
done
$SUDO apt-get update
$SUDO apt-get -y --allow-unauthenticated install python python-tk libboost-all-dev libusb-1.0-0-dev
$SUDO apt-get -y --allow-unauthenticated install libuhd-dev libuhd003 uhd-host
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
$SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
$SUDO -H pip install requests
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
# until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
$SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
install_usrp_uhd_driver_from_source
else
$SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
fi
fi
}
install_usrp_uhd_driver() {
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
# We move uhd-host apart because it depends on linux kernel version
# On newer kernels, it fails to install
$SUDO apt-get -y install uhd-host
fi
# quick workaround for RHE7.6
local distribution=$(get_distribution_release)
if [ -z $1 ]; then
if [[ "$distribution" == "rhel7.6" ]]; then
$SUDO /usr/local/bin/uhd_images_downloader
else
$SUDO uhd_images_downloader
fi
else
if [[ "$distribution" == "rhel7.6" ]]; then
$SUDO /usr/local/bin/uhd_images_downloader -i $1
else
$SUDO uhd_images_downloader -i $1
fi
fi
}
install_bladerf_driver_from_source(){
bladerf_install_log=$OPENAIR_DIR/cmake_targets/log/bladerf_install_log.txt
echo_info "\nInstalling BladeRF driver from sources. The log file for BladeRF driver installation is here: $bladerf_install_log "
(
cd /tmp
echo "Downloading BladeRF driver"
rm -rf /tmp/bladeRF
git clone https://github.com/Nuand/bladeRF.git
cd bladeRF
git checkout tags/2016.06
mkdir -p build
cd build
$CMAKE ../
echo "Compiling BladeRF driver"
make
$SUDO make install
$SUDO ldconfig
echo "Downloading FPGA and firmware images"
cd /tmp/bladeRF
wget https://www.nuand.com/fx3/bladeRF_fw_latest.img
wget https://www.nuand.com/fpga/hostedx40-latest.rbf
sudo mkdir -p /usr/share/Nuand/bladeRF
sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
) >& $bladerf_install_log
}
check_install_bladerf_driver(){
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
if [ "$(get_distribution_release)" == "ubuntu14.04" ] ; then
$SUDO add-apt-repository -y ppa:bladerf/bladerf
$SUDO apt-get update
fi
$SUDO apt-get install -y --allow-unauthenticated bladerf libbladerf-dev
$SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
$SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
install_bladerf_driver_from_source
else
echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
fi
}
flash_firmware_bladerf() {
$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}
check_install_lmssdr_driver(){
if ( [ -d "/usr/local/include/lime" ] &&
[ -f "/usr/local/include/lime/LimeSuite.h" ] )
then
echo_success "Found lmssdr drivers and tools installed from source"
else
echo_error "lmssdr support implies installing lmssdr drivers and tools" \
" from sources. check:"
echo_info "https://wiki.myriadrf.org/Lime_Suite"
echo_fatal "Cannot compile lmssdr device"
fi
}
install_soapy_from_source(){
soapy_install_log=$OPENAIR_DIR/cmake_targets/log/soapy_install_log.txt
echo_info "\nInstalling Soapy EcoSystem from source. The log file for Soapy installation is here: $soapy_install_log "
(
cd /tmp
echo "Downloading SoapySDR"
rm -rf /tmp/soapysdr
git clone -b soapy-sdr-0.7.0 --single-branch https://github.com/pothosware/SoapySDR.git
cd SoapySDR
#git checkout tags/release_003_010_001_001
mkdir -p build
cd build
$CMAKE ../
echo "Compiling SoapySDR"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
cd /tmp
echo "Downloading SoapyRemote"
rm -rf /tmp/soapyremote
git clone -b soapy-remote-0.5.0 --single-branch https://github.com/pothosware/SoapyRemote.git
cd SoapyRemote
#git checkout tags/release_003_010_001_001
mkdir -p build
cd build
cmake ../
echo "Compiling SoapyRemote"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
) >& $soapy_install_log
}
install_soapy_iris_from_source(){
iris_install_log=$OPENAIR_DIR/cmake_targets/log/iris_install_log.txt
echo_info "\nInstalling Iris driver from source. The log file for Iris driver installation is here: $iris_install_log "
(
cd /tmp
echo "Downloading SoapyIris"
rm -rf /tmp/sklk-soapyiris
git clone -b soapy-iris-2018.08.0.1 --single-branch https://github.com/skylarkwireless/sklk-soapyiris.git
cd sklk-soapyiris
mkdir -p build
cd build
cmake ../
echo "Compiling SoapyIris"
make -j`nproc`
$SUDO make install
$SUDO ldconfig
) >& $iris_install_log
}
check_install_soapy () {
#if [[ "$OS_DISTRO" == "ubuntu" ]]; then
#first we remove old installation
$SUDO apt-get remove -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote || true
#$SUDO add-apt-repository -y ppa:myriadrf/drivers
#$SUDO apt-get update
#$SUDO apt-get install -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote
#elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
# $SUDO $INSTALLER -y install software-properties-common python3-software-properties python-software-properties subversion git python3 python-numpy python3-numpy cmake swig python-dev
install_soapy_from_source
#fi
install_soapy_iris_from_source
}
check_install_additional_tools (){
$SUDO $INSTALLER update -y
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
PACKAGE_LIST="\
check \
dialog \
dkms \
gawk \
libboost-all-dev \
libpthread-stubs0-dev \
openvpn \
pkg-config \
python-dev \
python-pexpect \
sshfs \
swig \
tshark \
uml-utilities \
unzip \
valgrind \
vlan \
ctags \
ntpdate \
iperf3 \
android-tools-adb \
wvdial \
python-numpy \
sshpass \
nscd \
bc \
ntp \
python-scipy \
python-matplotlib"
elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
PACKAGE_LIST="\
check \
dialog \
dkms \
gawk \
boost-devel \
openvpn \
pkgconfig \
pexpect \
sshfs \
swig \
wireshark \
unzip \
valgrind \
vconfig \
ctags \
ntpdate \
iperf3 \
wvdial \
numpy \
sshpass \
nscd \
python2-paramiko \
python-pyroute2 \
python-netifaces \
scipy \
python-matplotlib"
elif [[ "$OS_DISTRO" == "fedora" ]]; then
PACKAGE_LIST=" \
check \
dialog \
dkms \
gawk \
boost-devel \
openvpn \
pkgconfig \
python-pexpect \
sshfs \
swig \
wireshark \
unzip \
valgrind \
vconfig \
ctags \
ntpdate \
iperf3 \
wvdial \
python-numpy \
sshpass \
nscd \
python2-paramiko \
python-pyroute2 \
python-netifaces \
python2-scipy \
python2-matplotlib"
fi
$SUDO $INSTALLER install -y $PACKAGE_LIST
$SUDO rm -fr /opt/ssh
$SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh
#The packages below are already installed for Redhat distros (RHEL, CentOS, Fedora)
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
$SUDO -H pip install paramiko
$SUDO -H pip install pyroute2 colorama
log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
(
$SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
wget -P /tmp https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
cd /tmp/netifaces-0.10.4
$SUDO python setup.py install
cd -
) >& $log_netiface
fi
}
check_install_oai_software() {
local specific_packages=""
if ! check_supported_distribution; then
echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
exit 1
fi
$SUDO $INSTALLER update -y
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
local LAPACK_LIBNAME="liblapack.so"
local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
$SUDO apt install -y software-properties-common
case "$(get_distribution_release)" in
"ubuntu14.04")
specific_packages="libtasn1-3-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
# For iperf3
$SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
$SUDO apt-get update
;;
"ubuntu16.04")
specific_packages="libtasn1-6-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
;;
"ubuntu17.04")
specific_packages="libtasn1-6-dev libgnutls28-dev libatlas-dev iproute libconfig8-dev"
;;
"ubuntu17.10")
specific_packages="libtasn1-6-dev libgnutls28-dev iproute libconfig8-dev"
LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
;;
"ubuntu18.04")
specific_packages="libtasn1-6-dev libgnutls28-dev iproute2 libconfig-dev"
LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
;;
esac
$SUDO apt-get install -y \
$specific_packages \
autoconf \
automake \
bison \
build-essential \
cmake \
cmake-curses-gui \
doxygen \
doxygen-gui \
texlive-latex-base \
ethtool \
flex \
gdb \
git \
graphviz \
gtkwave \
guile-2.0-dev \
iperf \
iptables \
iptables-dev \
libatlas-base-dev \
libblas-dev \
liblapack-dev\
liblapacke-dev\
libffi-dev \
libforms-bin \
libforms-dev \
libgcrypt11-dev \
libgmp-dev \
libgtk-3-dev \
libidn2-0-dev \
libidn11-dev \
libmysqlclient-dev \
libpython2.7-dev \
libsctp1 \
libsctp-dev \
libssl-dev \
libtool \
libusb-1.0-0-dev \
libxml2 \
libxml2-dev \
libxslt1-dev \
mscgen \
octave-signal \
openssh-client \
openssh-server \
openssl \
python \
subversion \
xmlstarlet \
python-pip \
pydb \
libyaml-dev \
wget \
libxpm-dev \
libboost-all-dev
$SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"
$SUDO apt-get install -y nettle-dev nettle-bin
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
if rpm -q epel-release > /dev/null; then
echo "EPEL repos already present. Good."
else
echo "EPEL repos not present. Installing them."
$SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
fi
$SUDO $INSTALLER install -y python-epdb vim-common
else
$SUDO $INSTALLER install -y mscgen pydb
fi
$SUDO $INSTALLER install -y \
autoconf \
automake \
bc \
bison \
$CMAKE \
doxygen \
ethtool \
flex \
gdb \
git \
graphviz \
gtkwave \
guile-devel \
iperf \
iproute \
iptables \
iptables-devel \
atlas-devel \
blas-devel \
libconfig-devel \
libffi-devel \
xforms \
xforms-devel \
libgcrypt-devel \
gmp-devel \
gtk3-devel \
libidn2-devel \
libidn-devel \
mariadb-devel \
lksctp-tools \
lksctp-tools-devel \
openssl-devel \
libtasn1 \
libtool \
libusb-devel \
libxml2 \
libxml2-devel \
libxslt-devel \
openssh-clients \
openssh-server \
openssl \
patch \
psmisc \
python \
subversion \
xmlstarlet \
python-pip \
wget \
kernel-headers \
kernel-devel \
nettle-devel \
gnutls-devel \
libXpm-devel \
lapack \
lapack-devel \
blas \
blas-devel \
libyaml-devel
fi
install_asn1c_from_source $1
$SUDO rm -fr /opt/ssh
$SUDO git clone https://gist.github.com/2190472.git /opt/ssh
}
install_asn1c_from_source(){
asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
(
$SUDO rm -rf /tmp/asn1c
# GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
cd /tmp/asn1c
# better to use a given commit than a branch in case the branch
# is updated and requires modifications in the source of OAI
#git checkout velichkov_s1ap_plus_option_group
git checkout f12568d617dbf48497588f8e227d70388fa217c9
autoreconf -iv
./configure
make -j`nproc`
$SUDO make install
cd -
$SUDO ldconfig
) > $asn1_install_log 2>&1
}
#################################################
# 2. compile
################################################
install_nas_tools() {
if [ ! -f .ue.nvram0 ]; then
echo_success "generate .ue_emm.nvram .ue.nvram"
./nvram --gen -c $1 -o $2
else
[ ./nvram -nt .ue.nvram0 -o ./nvram -nt .ue_emm.nvram0 ] && ./nvram --gen -c $1 -o $2
fi
if [ ! -f .usim.nvram0 ]; then
echo_success "generate .usim.nvram"
./usim --gen -c $1 -o $2
else
[ ./usim -nt .usim.nvram0 ] && ./usim --gen -c $1 -o $2
fi
}
################################
# set_openair_env
###############################
set_openair_env(){
fullpath=`readlink -f $BASH_SOURCE`
[ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
openair_path=${fullpath%/cmake_targets/*}
openair_path=${openair_path%/targets/*}
openair_path=${openair_path%/openair[123]/*}
export OPENAIR_DIR=$openair_path
export OPENAIR1_DIR=$openair_path/openair1
export OPENAIR2_DIR=$openair_path/openair2
export OPENAIR3_DIR=$openair_path/openair3
export OPENAIR_TARGETS=$openair_path/targets
}
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
echo_info "** Calling sync now..."
sync
while true
do
FORLOOP=FALSE
# Get all the child process id
for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
do
if [ $i -ne $CURPID ] ; then
procid[$arraycounter]=$i
arraycounter=`expr $arraycounter + 1`
ppid=$i
FORLOOP=TRUE
fi
done
if [ "$FORLOOP" = "FALSE" ] ; then
arraycounter=`expr $arraycounter - 1`
## We want to kill child process id first and then parent id's
while [ $arraycounter -ne 0 ]
do
echo "first we send ctrl-c to program"
$SUDO kill -INT "${procid[$arraycounter]}"
sleep 5
echo "Now we force kill if that didn't work"
$SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
arraycounter=`expr $arraycounter - 1`
done
exit
fi
done
}
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {
local ip=$1
local stat=1
if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
OIFS=$IFS
IFS='.'
ip=($ip)
IFS=$OIFS
[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
stat=$?
fi
return $stat
}
Reference in New Issue View Git Blame Copy Permalink