yigid/openairinterface5g
1
0
Fork 0
mirror of https://gitlab.eurecom.fr/oai/openairinterface5g.git synced 2026-07-13 04:30:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
ab75a7ccfbc6af409b5b62773e9613880246e127
openairinterface5g/executables/softmodem-common.h
Bartosz Podrygajlo ab75a7ccfb Add IQ file recording and IQ file viewer to ImScope 
This commit introduces the following changes to ImScope:
 - Added the ability to record IQ data using the same mechanism as ImScope.
 - Added a new executable target `imscope_iq_file_viewer` for viewing IQ files.
 - Introduced a command line argument `--imscope-record` that enables data recording mode.
 - Refactored a lot of the scope code

Usage:
 - To record IQ data, run a modem with `--imscope-record` flag.
   The recording happens whenever a modem calls dumpScopeData, which currently is
   done only in gNB on PUSCH DTX and PUSCH CRC NOK.
   There is a limit of ~1GB of files written by the thread in a signle run to avoid
   accidentally exhausting disk space.
   If a directory `imscope-dump` is available the data will be recorded there in .imscope
   files. Otherwise files are written to the directory the modem was run. This is done so that
   the directory can be mapped in a docker container.

 - To view recorded IQ files, use the new executable `imscope_iq_file_viewer`. This can be done by running:
      ```
      ./imscope_iq_file_viewer <path_to_iq_file>
      ```
   Replace `<path_to_iq_file>` with the path to the IQ file you want to view.
2025-01-28 16:54:54 +01:00

373 lines
24 KiB
C
Raw Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file softmodem-common.h
* \brief Top-level threads for eNodeB
* \author
* \date 2012
* \version 0.1
* \company Eurecom
* \email:
* \note
* \warning
*/
#ifndef SOFTMODEM_COMMON_H
#define SOFTMODEM_COMMON_H
#ifdef __cplusplus
extern "C"
{
#endif
#include <stdint.h>
#include "common/config/config_load_configmodule.h"
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_SPLIT73 "Split 7.3 (below rate matching) option: <cu|du>:<remote ip address>:<remote port>\n"
#define CONFIG_HLP_TPOOL "Thread pool configuration: \n\
list of cores, comma separated (negative value is no core affinity)\n\
example: -1,3 launches two working threads one floating, the second set on core 3\n\
default 8 floating threads\n\
use N for no pool (runs in calling thread) recommended with rfsim.\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n"
#define CONFIG_HLP_SA "run gNB in standalone mode\n"
#define CONFIG_HLP_SL_MODE "sets the NR sidelink mode (0: not in sidelink mode, 1: in-coverage/gNB, 2: out-of-coverage/no gNB)\n"
#define CONFIG_HLP_EXTS "tells hardware to use an external timing reference\n"
#define CONFIG_HLP_DMRSSYNC "tells RU to insert DMRS in subframe 1 slot 0"
#define CONFIG_HLP_CLK "tells hardware to use a clock reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TME "tells hardware to use a time reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TUNE_OFFSET "LO tuning offset to use in Hz\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_ULF "Set the uplink frequency offset for all component carriers\n"
#define CONFIG_HLP_SLF "Set the sidelink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_256QAM "Use the 256 QAM mcs table for PDSCH\n"
#define CONFIG_HLP_CHESTFREQ "Set channel estimation type in frequency domain. 0-Linear interpolation (default). 1-PRB based averaging of channel estimates in frequency. \n"
#define CONFIG_HLP_CHESTTIME "Set channel estimation type in time domain. 0-Symbols take estimates of the last preceding DMRS symbol (default). 1-Symbol based averaging of channel estimates in time. \n"
#define CONFIG_HLP_IMSCOPE "Enable phy scope based on imgui and implot"
#define CONFIG_HLP_IMSCOPE_RECORD "Enable recording scope data to filesystem"
#define CONFIG_HLP_NONSTOP "Go back to frame sync mode after 100 consecutive PBCH failures\n"
//#define CONFIG_HLP_NUMUES "Set the number of UEs for the emulation"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_TQFS \
"Apply three-quarter of sampling frequency, (example 23.04 Msps for LTE 20MHz) to reduce the data rate on USB/PCIe transfers " \
"(only valid for some bandwidths)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_BAND "band index\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_NOS1 "Disable s1 interface\n"
#define CONFIG_HLP_RFSIM "Run in rf simulator mode\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_NFAPI "Change the nFAPI mode for NR 'MONOLITHIC', 'PNF', 'VNF', 'AERIAL','UE_STUB_PNF','UE_STUB_OFFNET','STANDALONE_PNF'\n"
#define CONFIG_L1_EMULATOR "Run in L1 emulated mode (disable PHY layer)\n"
#define CONFIG_HLP_CONTINUOUS_TX "perform continuous transmission, even in TDD mode (to work around USRP issues)\n"
#define CONFIG_HLP_STATS_DISABLE "disable globally the stats generation and persistence"
#define CONFIG_HLP_NOITTI "Do not start itti threads, call queue processing in place, inside the caller thread"
#define CONFIG_HLP_SYNC_REF "UE acts a Sync Reference in Sidelink. 0-none 1-GNB 2-GNSS 4-localtiming\n"
#define CONFIG_HLP_TADV \
"Set RF board timing_advance to compensate fix delay inside the RF board between Rx and Tx timestamps (RF board internal " \
"issues)\n"
/*-----------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters common to eNodeB and UE */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-----------------------------------------------------------------------------------------------------------------------------------------------------*/
#define RF_CONFIG_FILE softmodem_params.rf_config_file
#define TP_CONFIG softmodem_params.threadPoolConfig
#define CONTINUOUS_TX softmodem_params.continuous_tx
#define PHY_TEST softmodem_params.phy_test
#define DO_RA softmodem_params.do_ra
#define SL_MODE softmodem_params.sl_mode
#define CHAIN_OFFSET softmodem_params.chain_offset
#define NUMEROLOGY softmodem_params.numerology
#define BAND softmodem_params.band
#define EMULATE_RF softmodem_params.emulate_rf
#define CLOCK_SOURCE softmodem_params.clock_source
#define TIMING_SOURCE softmodem_params.timing_source
#define TUNE_OFFSET softmodem_params.tune_offset
#define SEND_DMRSSYNC softmodem_params.send_dmrs_sync
#define USIM_TEST softmodem_params.usim_test
#define CHEST_FREQ softmodem_params.chest_freq
#define CHEST_TIME softmodem_params.chest_time
#define NFAPI softmodem_params.nfapi
#define NSA softmodem_params.nsa
#define NODE_NUMBER softmodem_params.node_number
#define NON_STOP softmodem_params.non_stop
#define EMULATE_L1 softmodem_params.emulate_l1
#define CONTINUOUS_TX softmodem_params.continuous_tx
#define SYNC_REF softmodem_params.sync_ref
#define DEFAULT_RFCONFIG_FILE "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
extern int usrp_tx_thread;
// clang-format off
#define CMDLINE_PARAMS_DESC { \
{"rf-config-file", CONFIG_HLP_RFCFGF, 0, .strptr=&RF_CONFIG_FILE, .defstrval=NULL, TYPE_STRING, 0}, \
{"thread-pool", CONFIG_HLP_TPOOL, 0, .strptr=&TP_CONFIG, .defstrval="-1,-1,-1,-1,-1,-1,-1,-1", TYPE_STRING, 0}, \
{"phy-test", CONFIG_HLP_PHYTST, PARAMFLAG_BOOL, .iptr=&PHY_TEST, .defintval=0, TYPE_INT, 0}, \
{"do-ra", CONFIG_HLP_DORA, PARAMFLAG_BOOL, .iptr=&DO_RA, .defintval=0, TYPE_INT, 0}, \
{"sl-mode", CONFIG_HLP_SL_MODE, 0, .u8ptr=&SL_MODE, .defintval=0, TYPE_UINT8, 0}, \
{"usim-test", CONFIG_HLP_USIM, PARAMFLAG_BOOL, .u8ptr=&USIM_TEST, .defintval=0, TYPE_UINT8, 0}, \
{"clock-source", CONFIG_HLP_CLK, 0, .uptr=&CLOCK_SOURCE, .defintval=0, TYPE_UINT, 0}, \
{"time-source", CONFIG_HLP_TME, 0, .uptr=&TIMING_SOURCE, .defintval=0, TYPE_UINT, 0}, \
{"tune-offset", CONFIG_HLP_TUNE_OFFSET, 0, .dblptr=&TUNE_OFFSET, .defintval=0, TYPE_DOUBLE, 0}, \
{"C" , CONFIG_HLP_DLF, 0, .u64ptr=&(downlink_frequency[0][0]), .defuintval=0, TYPE_UINT64, 0}, \
{"CO" , CONFIG_HLP_ULF, 0, .iptr=&(uplink_frequency_offset[0][0]), .defintval=0, TYPE_INT, 0}, \
{"a" , CONFIG_HLP_CHOFF, 0, .iptr=&CHAIN_OFFSET, .defintval=0, TYPE_INT, 0}, \
{"d" , CONFIG_HLP_SOFTS, PARAMFLAG_BOOL, .uptr=&do_forms, .defintval=0, TYPE_UINT, 0}, \
{"q" , CONFIG_HLP_STMON, PARAMFLAG_BOOL, .iptr=&cpu_meas_enabled, .defintval=0, TYPE_INT, 0}, \
{"numerology" , CONFIG_HLP_NUMEROLOGY, 0, .iptr=&NUMEROLOGY, .defintval=1, TYPE_INT, 0}, \
{"band" , CONFIG_HLP_BAND, 0, .iptr=&BAND, .defintval=78, TYPE_INT, 0}, \
{"emulate-rf" , CONFIG_HLP_EMULATE_RF, PARAMFLAG_BOOL, .iptr=&EMULATE_RF, .defintval=0, TYPE_INT, 0}, \
{"parallel-config", CONFIG_HLP_PARALLEL_CMD, 0, .strptr=&parallel_config, .defstrval=NULL, TYPE_STRING, 0}, \
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, .strptr=&worker_config, .defstrval=NULL, TYPE_STRING, 0}, \
{"noS1", CONFIG_HLP_NOS1, PARAMFLAG_BOOL, .uptr=&noS1, .defintval=0, TYPE_UINT, 0}, \
{"rfsim", CONFIG_HLP_RFSIM, PARAMFLAG_BOOL, .uptr=&rfsim, .defintval=0, TYPE_UINT, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT, PARAMFLAG_BOOL, .uptr=&nonbiot, .defuintval=0, TYPE_UINT, 0}, \
{"chest-freq", CONFIG_HLP_CHESTFREQ, 0, .iptr=&CHEST_FREQ, .defintval=0, TYPE_INT, 0}, \
{"chest-time", CONFIG_HLP_CHESTTIME, 0, .iptr=&CHEST_TIME, .defintval=0, TYPE_INT, 0}, \
{"nsa", CONFIG_HLP_NSA, PARAMFLAG_BOOL, .iptr=&NSA, .defintval=0, TYPE_INT, 0}, \
{"node-number", NULL, 0, .u16ptr=&NODE_NUMBER, .defuintval=0, TYPE_UINT16, 0}, \
{"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0, .iptr=&usrp_tx_thread, .defstrval=0, TYPE_INT, 0}, \
{"nfapi", CONFIG_HLP_NFAPI, 0, .strptr=NULL, .defstrval="MONOLITHIC", TYPE_STRING, 0}, \
{"non-stop", CONFIG_HLP_NONSTOP, PARAMFLAG_BOOL, .iptr=&NON_STOP, .defintval=0, TYPE_INT, 0}, \
{"emulate-l1", CONFIG_L1_EMULATOR, PARAMFLAG_BOOL, .iptr=&EMULATE_L1, .defintval=0, TYPE_INT, 0}, \
{"continuous-tx", CONFIG_HLP_CONTINUOUS_TX, PARAMFLAG_BOOL, .iptr=&CONTINUOUS_TX, .defintval=0, TYPE_INT, 0}, \
{"disable-stats", CONFIG_HLP_STATS_DISABLE, PARAMFLAG_BOOL, .iptr=&stats_disabled, .defintval=0, TYPE_INT, 0}, \
{"no-itti-threads", CONFIG_HLP_NOITTI, PARAMFLAG_BOOL, .iptr=&softmodem_params.no_itti, .defintval=0, TYPE_INT, 0}, \
{"sync-ref", CONFIG_HLP_SYNC_REF, 0, .uptr=&SYNC_REF, .defintval=0, TYPE_UINT, 0}, \
{"A" , CONFIG_HLP_TADV, 0, .iptr=&softmodem_params.command_line_sample_advance,.defintval=0, TYPE_INT, 0}, \
{"E" , CONFIG_HLP_TQFS, PARAMFLAG_BOOL, .iptr=&softmodem_params.threequarter_fs, .defintval=0, TYPE_INT, 0}, \
{"imscope" , CONFIG_HLP_IMSCOPE, PARAMFLAG_BOOL, .uptr=&enable_imscope, .defintval=0, TYPE_UINT, 0}, \
{"imscope-record" , CONFIG_HLP_IMSCOPE_RECORD,PARAMFLAG_BOOL, .uptr=&enable_imscope_record, .defintval=0, TYPE_UINT, 0}, \
}
// clang-format on
// clang-format off
#define CMDLINE_PARAMS_CHECK_DESC { \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s3a = { config_checkstr_assign_integer, \
{"MONOLITHIC", "PNF", "VNF", "AERIAL","UE_STUB_PNF","UE_STUB_OFFNET","STANDALONE_PNF"}, \
{NFAPI_MONOLITHIC, NFAPI_MODE_PNF, NFAPI_MODE_VNF, NFAPI_MODE_AERIAL,NFAPI_UE_STUB_PNF,NFAPI_UE_STUB_OFFNET,NFAPI_MODE_STANDALONE_PNF}, \
7 } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
{ .s5 = { NULL } }, \
}
// clang-format on
#define CONFIG_HLP_NSA "Enable NSA mode \n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valid options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))\n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
#define CONFIG_HLP_WEB "Start embedded web server \n"
#define CONFIG_FLOG_OPT "R"
#define CONFIG_LOGL_OPT "g"
/*-------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-------------------------------------------------------------------------------------------------------------------------------------------------*/
// clang-format off
#define CMDLINE_LOGPARAMS_DESC { \
{CONFIG_FLOG_OPT, CONFIG_HLP_FLOG, 0, .uptr = &online_log_messages, .defintval = 1, TYPE_INT, 0}, \
{CONFIG_LOGL_OPT, CONFIG_HLP_LOGL, 0, .uptr = &glog_level, .defintval = 0, TYPE_UINT, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL | PARAMFLAG_CMDLINEONLY, .uptr = &start_telnetsrv, .defintval = 0, TYPE_UINT, 0}, \
{"websrv", CONFIG_HLP_WEB, PARAMFLAG_BOOL | PARAMFLAG_CMDLINEONLY, .uptr = &start_websrv, .defintval = 0, TYPE_UINT, 0}, \
{"log-mem", NULL, 0, .strptr = &logmem_filename, .defstrval = NULL, TYPE_STRING, 0}, \
{"telnetclt", NULL, 0, .uptr = &start_telnetclt, .defstrval = NULL, TYPE_UINT, 0}, \
}
// clang-format on
/* check function for global log level */
// clang-format off
#define CMDLINE_LOGPARAMS_CHECK_DESC { \
{ .s5= {NULL} } , \
{ .s2= {config_check_intrange, {0,4}}}, \
{ .s5= {NULL} } , \
{ .s5= {NULL} } , \
{ .s5= {NULL} } , \
{ .s5= {NULL} } , \
}
// clang-format on
/***************************************************************************************************************************************/
#define IS_SOFTMODEM_NOS1 (get_softmodem_optmask()->bit.SOFTMODEM_NOS1_BIT)
#define IS_SOFTMODEM_NONBIOT (get_softmodem_optmask()->bit.SOFTMODEM_NONBIOT_BIT)
#define IS_SOFTMODEM_RFSIM (get_softmodem_optmask()->bit.SOFTMODEM_RFSIM_BIT)
#define IS_SOFTMODEM_SIML1 (get_softmodem_optmask()->bit.SOFTMODEM_SIML1_BIT)
#define IS_SOFTMODEM_DLSIM (get_softmodem_optmask()->bit.SOFTMODEM_DLSIM_BIT)
#define IS_SOFTMODEM_DOSCOPE (get_softmodem_optmask()->bit.SOFTMODEM_DOSCOPE_BIT)
#define IS_SOFTMODEM_IQPLAYER (get_softmodem_optmask()->bit.SOFTMODEM_RECPLAY_BIT)
#define IS_SOFTMODEM_IQRECORDER (get_softmodem_optmask()->bit.SOFTMODEM_RECRECORD_BIT)
#define IS_SOFTMODEM_TELNETCLT (get_softmodem_optmask()->bit.SOFTMODEM_TELNETCLT_BIT)
#define IS_SOFTMODEM_ENB (get_softmodem_optmask()->bit.SOFTMODEM_ENB_BIT)
#define IS_SOFTMODEM_GNB (get_softmodem_optmask()->bit.SOFTMODEM_GNB_BIT)
#define IS_SOFTMODEM_4GUE (get_softmodem_optmask()->bit.SOFTMODEM_4GUE_BIT)
#define IS_SOFTMODEM_5GUE (get_softmodem_optmask()->bit.SOFTMODEM_5GUE_BIT)
#define IS_SOFTMODEM_NOSTATS (get_softmodem_optmask()->bit.SOFTMODEM_NOSTATS_BIT)
#define IS_SOFTMODEM_IMSCOPE_ENABLED (get_softmodem_optmask()->bit.SOFTMODEM_IMSCOPE_BIT)
#define IS_SOFTMODEM_IMSCOPE_RECORD_ENABLED (get_softmodem_optmask()->bit.SOFTMODEM_IMSCOPE_RECORD_BIT)
typedef struct optmask_s {
union {
struct {
uint64_t SOFTMODEM_NOS1_BIT: 1;
uint64_t SOFTMODEM_NOKRNMOD_BIT: 1;
uint64_t SOFTMODEM_NONBIOT_BIT: 1;
uint64_t SOFTMODEM_RFSIM_BIT: 1;
uint64_t SOFTMODEM_SIML1_BIT: 1;
uint64_t SOFTMODEM_DLSIM_BIT: 1;
uint64_t SOFTMODEM_DOSCOPE_BIT: 1;
uint64_t SOFTMODEM_RECPLAY_BIT: 1;
uint64_t SOFTMODEM_TELNETCLT_BIT: 1;
uint64_t SOFTMODEM_RECRECORD_BIT: 1;
uint64_t SOFTMODEM_ENB_BIT: 1;
uint64_t SOFTMODEM_GNB_BIT: 1;
uint64_t SOFTMODEM_4GUE_BIT: 1;
uint64_t SOFTMODEM_5GUE_BIT: 1;
uint64_t SOFTMODEM_NOSTATS_BIT: 1;
uint64_t SOFTMODEM_IMSCOPE_BIT: 1;
uint64_t SOFTMODEM_IMSCOPE_RECORD_BIT : 1;
} bit;
uint64_t v; // allow to export entire bit set, force to 64 bit processor atomic size
};
} optmask_t;
typedef struct {
optmask_t optmask;
//THREAD_STRUCT thread_struct;
char *rf_config_file;
char *threadPoolConfig;
int phy_test;
int do_ra;
uint8_t sl_mode;
uint8_t usim_test;
int emulate_rf;
int chain_offset;
int numerology;
int band;
uint32_t clock_source;
uint32_t timing_source;
double tune_offset;
int command_line_sample_advance;
uint32_t send_dmrs_sync;
int use_256qam_table;
int chest_time;
int chest_freq;
uint8_t nfapi;
int nsa;
uint16_t node_number;
int non_stop;
int emulate_l1;
int continuous_tx;
uint32_t sync_ref;
int no_itti;
int threequarter_fs;
} softmodem_params_t;
#define IS_SA_MODE(sM_params) (!(sM_params)->phy_test && !(sM_params)->do_ra && !(sM_params)->nsa)
void softmodem_verify_mode(const softmodem_params_t *p);
#define get_softmodem_optmask() (&(get_softmodem_params()->optmask))
softmodem_params_t *get_softmodem_params(void);
void get_common_options(configmodule_interface_t *cfg);
char *get_softmodem_function(void);
#define SOFTMODEM_RTSIGNAL (SIGRTMIN+1)
void set_softmodem_sighandler(void);
extern uint64_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int usrp_tx_thread;
extern int sf_ahead;
extern int oai_exit;
void ru_tx_func(void *param);
void configure_ru(void *, void *arg);
void configure_rru(void *, void *arg);
struct timespec timespec_add(struct timespec lhs, struct timespec rhs);
struct timespec timespec_sub(struct timespec lhs, struct timespec rhs);
extern uint8_t nfapi_mode;
#ifdef __cplusplus
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink