Remove autotest physim test framework

No longer used in CI, replaced by ctest testing.
xmlstarlet not used anymore, can be removed from build_helper

Closes #826

cmake_targets/autotests/README.txt

@@ -1,76 +0,0 @@
-OAI Test PLAN
-
-Obj.#   Case#   Test#   Description
-
-01      51              Run PHY simulator tests
-01      51      00      dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
-                        (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
-                        (Test 6: 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                        (Test 6b: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                        (Test 7: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
-                        (Test 7b: 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
-                        (Test 10: 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
-                        (Test 10b: 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
-                        (Test 11: 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
-                        (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
-                        (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
-01      51      01      ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB), 
-                        (Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
-                        (Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
-                        (Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
-                        (Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
-                        (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))
-01      51      02      ldpc Test cases. (Test1: block length = 3872),
-                        (Test2: block length = 4224),
-                        (Test3: block length = 4576),
-                        (Test4: block length = 4928),
-                        (Test5: block length = 5280),
-                        (Test6: block length = 5632),
-                        (Test7: block length = 6336),
-                        (Test8: block length = 7040),
-                        (Test9: block length = 7744),
-                        (Test10: block length = 8448)
-01      51      03      polartest Test cases. (Test1: PBCH polar test),
-                        (Test2: DCI polar test)
-01      51      04      nr_pbchsim Test cases. (Test1: PBCH-only, 106 PRB),
-                        (Test2: PBCH and synchronization, 106PBR),
-                        (Test3: PBCH-only, 217 PRB),
-                        (Test4: PBCH and synchronization, 217 RPB),
-                        (Test5: PBCH-only, 273 PRB),
-                        (Test6: PBCH and synchronization, 273 PRB)
-01      51      05      nr_dlsim Test cases. (Test1: 106 PRB),
-                        (Test2: 217 PRB),
-                        (Test3: 273 PRB)
-01      51      06      nr_dlschsim Test cases. (Test1: 106 PRB),
-                        (Test2: 217 PRB),
-                        (Test3: 273 PRB)
-01      51      07      shortblocktest Test cases. (Test1: 3 bits),
-                        (Test2: 6 bits),
-                        (Test3: 7 bits),
-                        (Test4: 11 bits)
-01      51      08      nr_ulschsim Test cases. (Test1: 106 PRB),
-                        (Test2: 217 PRB),
-                        (Test3: 273 PRB)
-01      51      09      nr_pucchsim Test cases. (Test1: Format 0 ACK miss 106 PRB),
-                        (Test2: Format 1 ACK miss 106 PRB),
-                        (Test3: Format 1 ACK miss 273 PRB),
-                        (Test4: Format 1 NACKtoACK 106 PRB)
-01      51      10      dlsim_tm4 test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
-                        (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
-                        (Test 6: 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                        (Test 6b: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                        (Test 7: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
-                        (Test 7b: 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
-                        (Test 10: 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
-                        (Test 10b: 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
-                        (Test 11: 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
-                        (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
-                        (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
-01      51      11      nr_ulsim Test cases. (Test1: MCS 9 106 PRBs),
-                        (Test2: MCS 16 50 PRBs),
-                        (Test3: MCS 28 50 PRBs),
-                        (Test4: MCS 9 217 PRBs),
-                        (Test5: MCS 9 273 PRBs)
-01      51      12      nr_prachsim Test cases.(Test1: 106 PRBs),
-                        (Test2: 217 PRBs),
-                        (Test3: 273 PRBs)

cmake_targets/autotests/run_exec_autotests.bash

@@ -1,304 +0,0 @@
-#!/bin/bash
-#set -xv
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
-
-if [ -s $OPENAIR_DIR/cmake_targets/tools/build_helper ] ; then
-   source $OPENAIR_DIR/cmake_targets/tools/build_helper
-else
-   echo "Error: no file in the file tree: is OPENAIR_DIR variable set?"
-   exit 1
-fi
-
-source $OPENAIR_DIR/cmake_targets/tools/test_helper
-
-tdir=$OPENAIR_DIR/cmake_targets/autotests
-rm -fr $tdir/bin
-mkdir -p $tdir/bin
-results_file="$tdir/log/results_autotests.xml"
-
-
-#\param $1 -> name of test case
-#\param $2 -> name of executable
-#\param $3 -> arguments for running the program
-#\param $4 -> search expression
-#\param $5 -> search expression which should NOT be found (for ex. segmentation fault)
-#\param $6 -> number of runs
-#\param $7 -> tags to help identify the test case for readability in output xml file
-#\param $8 => test config file params to be modified
-#\param $9 -> desc to help identify the test case for readability in output xml file
-
-function test_run() {
-    xUnit_start
-    test_case_name=$1
-    log_dir=$tdir/log/$test_case_name
-    log_file=$log_dir/test.$1.log.txt
-    main_exec=$2
-    exec_args=$3
-    search_expr_array=("${!4}")
-    search_expr_negative=$5
-    nruns=${6}
-    tags=${7}
-    test_config_file=${8}
-    desc=${9}
-
-    xmlfile_testcase=$log_dir/test.$1.xml
-    #Temporary log file where execution log is stored.
-    temp_exec_log=$log_dir/temp_log.txt
-    export OPENAIR_LOGDIR=$log_dir
-    rm -fr $log_dir
-    mkdir -p $log_dir
-
-    echo "" > $temp_exec_log
-    echo "start at $(date)" > "$log_file"
-    #echo "log_dir = $log_dir"
-    #echo "log_file = $log_file"
-    #echo "exec_file = $exec_file"
-    #echo "exec_args = $exec_args"
-    #echo "search_expr = $search_expr"
-    #echo "nruns = $nruns"
-    #echo "desc = $desc"
-
-    tags_array=()
-    read -a tags_array <<<"$tags"
-    desc_array=()
-    readarray -t desc_array <<<"$desc"
-
-    main_exec_args_array=()
-    readarray -t main_exec_args_array <<< "$exec_args"
-
-    if [ ! -f $main_exec ]; then
-      echo_fatal "no executable $main_exec found"
-    fi
-
-    tags_array_index=0
-    for main_exec_args_array_index in "${main_exec_args_array[@]}"
-    do
-      global_result=PASS
-      result_string=""
-      PROPER_DESC=`echo ${desc_array[$tags_array_index]} | sed -e "s@^.*Test cases.*(Test@Test@" -e "s@^ *(@@" -e"s/)$//" -e "s/),$//"`
-      echo_info "$PROPER_DESC"
-
-     for (( run_index=1; run_index <= $nruns; run_index++ ))
-      do
-        temp_exec_log="$log_dir/test.$test_case_name.${tags_array[$tags_array_index]}.run_$run_index"
-        echo "Executing test case $test_case_name.${tags_array[$tags_array_index]}, Run Index = $run_index, Execution Log file = $temp_exec_log"
-
-        echo "-----------------------------------------------------------------------------" > "$temp_exec_log"
-        echo "<EXECUTION LOG Test Case = $test_case_name.${tags_array[$tags_array_index]}, Run = $run_index >" >> "$temp_exec_log"
-        echo "Executing $main_exec $main_exec_args_array_index at $(date)" >> "$temp_exec_log"
-        uname -a >> "$temp_exec_log"
-        time "$main_exec" $main_exec_args_array_index >> "$temp_exec_log"  2>&1 &
-     done
-
-     wait
-
-     for (( run_index=1; run_index <= $nruns; run_index++ ))
-      do
-        temp_exec_log="$log_dir/test.$test_case_name.${tags_array[$tags_array_index]}.run_$run_index"
-        echo "</EXECUTION LOG Test Case = $test_case_name.${tags_array[$tags_array_index]},  Run = $run_index >" >> $temp_exec_log  2>&1
-        cat "$temp_exec_log" >> "$log_file"  2>&1
-
-        result=PASS
-        for search_expr in "${search_expr_array[@]}"
-        do
-          grep -Eq "$search_expr" $temp_exec_log || result=FAIL
-        done
-
-        #If we find a negative search result then there is crash of program and test case is failed even if above condition is true
-        grep -q -iE "$search_expr_negative" $temp_exec_log && result=FAIL
-        
-        if [ "$result" != PASS ]; then
-          echo_error "$test_case_name.${tags_array[$tags_array_index]} RUN = $run_index Result = FAIL"
-        else
-          echo_success "$test_case_name.${tags_array[$tags_array_index]} RUN = $run_index Result = PASS"
-        fi
-
-        result_string=$result_string" Run_$run_index =$result"
-        if [ $result != PASS ] ; then 
-          global_result=FAIL
-        fi
-
-     done #End of for loop (nindex)
-
-     echo "END at $(date)" >> "$log_file"
-
-      if [ "$global_result" != PASS ]; then
-         echo_error "execution $test_case_name.${tags_array[$tags_array_index]} {$PROPER_DESC} Run_Result = \"$result_string\" Result =  FAIL"
-         xUnit_fail "execution" "$test_case_name.${tags_array[$tags_array_index]}" "FAIL" "$result_string" "$xmlfile_testcase" "$PROPER_DESC"
-       else
-         echo_success "execution $test_case_name.${tags_array[$tags_array_index]} {$PROPER_DESC} Run_Result = \"$result_string\"  Result = PASS "
-         xUnit_success "execution" "$test_case_name.${tags_array[$tags_array_index]}" "PASS" "$result_string"   "$xmlfile_testcase"  "$PROPER_DESC"
-      fi
-
-     let "tags_array_index++"
-   done
-}
-
-dlog=$OPENAIR_DIR/cmake_targets/autotests/log
-exec_dir=$OPENAIR_DIR/cmake_targets/ran_build/build
-xml_conf="$OPENAIR_DIR/cmake_targets/autotests/test_case_list.xml"
-
-function print_help() {
- echo_info '
-This program runs automated test cases
-Options
--c | --config
-   Set the configuration file to execute (default: $xml_conf)
--d | --exec-dir
-   Set directory of executables (default: $exec_dir)
--g | --run-group
-   Run test cases in a group. For example, ./run_exec_autotests "0101* 010102"
--h | --help
-   This help
-'
-}
-
-function main () {
-RUN_GROUP=0
-test_case_group=""
-test_case_group_array=()
-test_case_array=()
-
-until [ -z "$1" ]; do
-  case "$1" in
-    -c|--config)
-      xml_conf=$2
-      echo "setting xml_conf to $xml_conf"
-      shift 2;;
-    -d|--exec-dir)
-      exec_dir=$2
-      echo "setting exec_dir to $exec_dir"
-      shift 2;;
-    -g | --run-group)
-      RUN_GROUP=1
-      test_case_group=$2
-      test_case_group=`sed "s/\+/\*/g" <<<  "${test_case_group}"` # Replace + with * for bash string substituion
-      echo_info "Will execute test cases only in group $test_case_group"
-      shift 2;;
-    -h | --help)
-      print_help
-      exit 1;;
-    *)
-      print_help
-      echo_fatal "Unknown option $1"
-      break;;
-  esac
-done
-
-test_case_excl_list=`xmlstarlet sel -t -v "/testCaseList/TestCaseExclusionList" $xml_conf`
-test_case_excl_list=`sed "s/\+/\*/g" <<< "$test_case_excl_list" ` # Replace + with * for bash string substituion
-echo "Test Case Exclusion List = $test_case_excl_list "
-read -a test_case_excl_array <<< "$test_case_excl_list"
-
-test_case_list=`xmlstarlet sel -T -t -m /testCaseList/testCase -s A:N:- "@id" -v "@id" -n $xml_conf`
-echo "test_case_list = $test_case_list"
-readarray -t test_case_array <<<"$test_case_list"
-
-read -a test_case_group_array <<< "$test_case_group"
-for search_expr in "${test_case_array[@]}"
-  do
-    flag_run_test_case=0
-    # search if this test case needs to be executed
-    if [ "$RUN_GROUP" -eq "1" ]; then
-       for search_group in "${test_case_group_array[@]}"
-       do
-          if [[ $search_expr == $search_group ]];then
-             flag_run_test_case=1
-             echo_info "Test case $search_expr match found in group"
-             break
-          fi
-       done
-    else
-       flag_run_test_case=1
-    fi
-
-    for search_excl in "${test_case_excl_array[@]}"
-       do
-          if [[ $search_expr == $search_excl ]];then
-             flag_run_test_case=0
-             echo_info "Test case $search_expr match found in test case excl group. Will skip the test case for execution..."
-             break
-          fi
-       done
-
-
-    #We skip this test case if it is not in the group list
-    if [ "$flag_run_test_case" -ne "1" ]; then
-      continue
-    fi
-
-    name=$search_expr
-    desc=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/desc" $xml_conf`
-    main_exec=$exec_dir/`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/main_exec" $xml_conf`
-    main_exec_args=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/main_exec_args" $xml_conf`
-    search_expr_true=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/search_expr_true" $xml_conf`
-    search_expr_false=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/search_expr_false" $xml_conf`
-    nruns=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/nruns" $xml_conf`
-    tags=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/tags" $xml_conf`
-
-    echo "name = $name"
-    echo "Description = $desc"
-    echo "main_exec = $main_exec"
-    echo "main_exec_args = $main_exec_args"
-    echo "search_expr_true = $search_expr_true"
-    echo "search_expr_false = $search_expr_false"
-    echo "tags = $tags"
-    echo "nruns = $nruns"
-
-
-    search_array_true=()
-
-    IFS=\"                  #set the shell field separator
-    set -f                  #dont try to glob
-    #set -- $search_expr_true             #split on $IFS
-    for i in $search_expr_true
-      do echo "i = $i"
-        if [ -n "$i" ] && [ "$i" != " " ]; then
-          search_array_true+=("$i")
-          #echo "inside i = \"$i\" "
-        fi
-      done
-    unset IFS
-
-    #echo "arg1 = ${search_array_true[0]}"
-    #echo " arg2 = ${search_array_true[1]}"
-
-    test_run \
-      "$name" \
-      "$main_exec" \
-      "$main_exec_args" \
-      "search_array_true[@]" \
-      "$search_expr_false" \
-      "$nruns" \
-      "$tags" \
-      "$test_config_file" \
-      "$desc"
-
-    done
-}
-
-uname -a
-
-main "$@"
-
-xUnit_write "$results_file"
-echo "Test Results are written to $results_file"

cmake_targets/autotests/test_case_list.xml

@@ -1,584 +0,0 @@
-<testCaseList>
- <TestCaseExclusionList></TestCaseExclusionList>
-
-    <testCase id="dlsim.basic">
-      <desc>dlsim Test cases. (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB),
-                              (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
-                              (Test 6: 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                              (Test 6b: 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                              (Test 7: 10 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
-                              (Test 7b: 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
-                              (Test 10: 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
-                              (Test 10b: 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
-                              (Test 11: 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))</desc>
-      <main_exec>dlsim</main_exec>
-      <main_exec_args> -m=5 -g=F -s=-1 -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -Tperf=60
-                       -m=4 -g=F -s=0 -w=1.0 -f=.2 -n=500 -B=6 -c=4 -z=2 -Tperf=60
-                       -m=15 -g=F -s=6.7 -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -Tperf=60
-                       -m=15 -g=F -s=6.7 -w=1.0 -f=.2 -n=500 -B=25 -c=2 -z=2 -Tperf=60
-                       -m=15 -g=G -s=1.4 -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -Tperf=25
-                       -m=15 -g=G -s=1.4 -w=1.0 -f=.2 -n=500 -B=25 -c=2 -z=2 -Tperf=25
-                       -m=25 -g=F -s=17.4 -w=1.0 -f=.2 -n=500 -B=25 -c=3 -z=2 -Tperf=60
-                       -m=25 -g=F -s=17.5 -w=1.0 -f=.2 -n=500 -B=25 -c=3 -z=2 -r=1022 -Tperf=60
-                       -m=26 -g=F -s=17.7 -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -Tperf=60</main_exec_args>
-      <tags>test1 test5 test6 test6b test7 test7b test10 test10b test11</tags>
-      <search_expr_true>"passed"</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="dlsim.100rb+tm2">
-      <desc>dlsim Test cases. (Test 15: 20 MHz, R.9 FDD	(MCS 26), EVA5, 17.6dB (70%)),
-                              (Test 15b: 20 MHz, R.9-2 FDD (MCS 26, 17PRB), EVA5, 17.3dB (70%)),
-                              (Test 15c: 20 MHz, R.9-1 FDD (MCS 26, 83 PRB), EVA5, 16.6dB (70%)),
-                              (TM2 Test 1: 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
-                              (TM2 Test 1b: 5 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%))</desc>
-      <main_exec>dlsim</main_exec>
-      <main_exec_args> -m=26 -g=F -s=17.6 -w=1.0 -f=.2 -n=500 -B=100 -c=2 -z=2 -Tperf=60
-                       -m=26 -g=F -s=17.3 -w=1.0 -f=.2 -n=500 -B=100 -c=2 -z=2 -r=1600 -Tperf=60
-                       -m=26 -g=F -s=16.6 -w=1.0 -f=.2 -n=500 -B=100 -c=2 -z=2 -r=1899 -Tperf=60
-                       -m=14 -g=F -s=6.8  -w=1.0 -f=.2 -n=500 -B=50 -c=2 -x=2 -y=2 -z=2 -Tperf=60
-                       -m=13 -g=F -s=5.9  -w=1.0 -f=.2 -n=500 -B=25 -c=3 -x=2 -y=2 -z=2 -Tperf=60</main_exec_args>
-      <tags>test15 test15b test15c TM2_test1 TM2_test1b</tags>
-      <search_expr_true>"passed"</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="ulsim">
-      <desc>ulsim Test cases. (Test 1: 5 MHz, FDD (MCS 5), AWGN, 6dB),
-             (Test 2: 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
-             (Test 3: 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
-             (Test 4: 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
-             (Test 5: 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
-             (Test 6: 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
-      <main_exec>ulsim</main_exec>
-      <main_exec_args> -BnbRBs=25 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Tperf=70
-                       -BnbRBs=25 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Tperf=70
-                       -BnbRBs=50 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Tperf=70
-                       -BnbRBs=50 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Tperf=70
-                       -BnbRBs=100 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Tperf=70
-                       -BnbRBs=100 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Tperf=70</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6</tags>
-      <search_expr_true>"passed"</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="ldpctest">
-      <desc>ldpc Test cases. (Test1: block length = 3872, BG1),
-             (Test2: block length = 4224, BG1),
-             (Test3: block length = 4576, BG1),
-             (Test4: block length = 4928, BG1),
-             (Test5: block length = 5280, BG1),
-             (Test6: block length = 5632, BG1),
-             (Test7: block length = 6336, BG1),
-             (Test8: block length = 7040, BG1),
-             (Test9: block length = 7744, BG1),
-             (Test10: block length = 8448, BG1),
-             (Test11: block length = 1, BG2),
-             (Test12: block length = 100, BG2),
-             (Test13: block length = 193, BG2),
-             (Test14: block length = 500, BG2),
-             (Test15: block length = 561, BG2),
-             (Test16: block length = 600, BG2),
-             (Test17: block length = 641, BG2),
-             (Test18: block length = 2000, BG2),
-             (Test19: block length = 3000, BG2),
-             (Test20: block length = 3840, BG2)</desc>
-      <main_exec>ldpctest</main_exec>
-      <main_exec_args>-l3872 -s10 -n100
-                      -l4224 -s10 -n100
-                      -l4576 -s10 -n100
-                      -l4928 -s10 -n100
-                      -l5280 -s10 -n100
-                      -l5632 -s10 -n100
-                      -l6336 -s10 -n100
-                      -l7040 -s10 -n100
-                      -l7744 -s10 -n100
-                      -l8448 -s10 -n100
-                      -l1 -s10 -n100
-                      -l100 -s10 -n100
-                      -l193 -s10 -n100
-                      -l500 -s10 -n100
-                      -l561 -s10 -n100
-                      -l600 -s10 -n100
-                      -l641 -s10 -n100
-                      -l2000 -s10 -n100
-                      -l3000 -s10 -n100
-                      -l3840 -s10 -n100</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7 test8 test9 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 test20</tags>
-      <search_expr_true>BLER 0.000000</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal|differ</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="polartest">
-      <desc>polartest Test cases. (Test1: PBCH polar test),
-                                  (Test2: DCI polar test),
-                                  (Test3: UCI polar test,6-bit CRC),
-                                  (Test4: UCI polar test,11-bit CRC)</desc>
-      <main_exec>polartest</main_exec>
-      <main_exec_args>-q -s-10 -f0
-                      -q -s-10 -f0 -m1
-                      -q -s-2 -f2 -m2 -k12
-                      -q -s-2 -f2 -m2 -k20</main_exec_args>
-      <tags>test1 test2 test3 test4</tags>
-      <search_expr_true>BLER= 0.000000</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_pbchsim.106rb">
-      <desc>nr_pbchsim Test cases. (Test1: PBCH-only, 106 PRB, NID 2),
-                                   (Test2: PBCH and synchronization, 106PBR),
-                                   (Test3: PBCH and synchronization, 106PBR, SSB SC OFFSET 6)</desc>
-      <main_exec>nr_pbchsim</main_exec>
-      <main_exec_args>-s-11 -S-8 -n10 -R106 -N2
-                      -s-11 -S-8 -n10 -o8000 -I -R106
-                      -s-11 -S-8 -n10 -R106 -c6</main_exec_args>
-      <tags>test1 test2 test3</tags>
-      <search_expr_true>PBCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_pbchsim.217rb">
-      <desc>nr_pbchsim Test cases. (Test1: PBCH-only, 217 PRB),
-                                   (Test2: PBCH and synchronization, 217 RPB)</desc>
-      <main_exec>nr_pbchsim</main_exec>
-      <main_exec_args>-s-10 -S-8 -n10 -R217
-                      -s-10 -S-8 -n10 -o8000 -I -R217</main_exec_args>
-      <tags>test1 test2</tags>
-      <search_expr_true>PBCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_pbchsim.273rb">
-      <desc>nr_pbchsim Test cases. (Test1: PBCH-only, 273 PRB),
-                                   (Test2: PBCH and synchronization, 273 PRB)</desc>
-      <main_exec>nr_pbchsim</main_exec>
-      <main_exec_args>-s-10 -S-8 -n10 -R273
-                      -s-10 -S-8 -n10 -o8000 -I -R273</main_exec_args>
-      <tags>test1 test2</tags>
-      <search_expr_true>PBCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_pbchsim.otherSCS">
-      <desc>nr_pbchsim Test cases. (Test1: PBCH-only, 15Khz, 5Mhz),
-                                   (Test2: PBCH-only, 120Khz, 50Mhz)</desc>
-      <main_exec>nr_pbchsim</main_exec>
-      <main_exec_args>-s-10 -S-8 -n10 -m0 -R25
-                      -s-10 -S-8 -n10 -m3 -R32</main_exec_args>
-      <tags>test1 test2</tags>
-      <search_expr_true>PBCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_dlsim.basic">
-      <desc>nr_dlsim Test cases. (Test1: 106 PRB),
-                                 (Test2: 217 PRB),
-                                 (Test3: 273 PRB),
-                                 (Test4: HARQ test 25% TP 4 rounds),
-                                 (Test5: HARQ test 33% TP 3 rounds),
-                                 (Test6: HARQ test 50% TP 2 rounds),
-                                 (Test7: 25 PRBs, 15 kHz SCS),
-                                 (Test8: 32 PRBs, 120 kHz SCS)</desc>
-      <main_exec>nr_dlsim</main_exec>
-      <main_exec_args>-n100 -R106 -b106 -s5
-                      -n100 -R217 -b217 -s5
-                      -n100 -R273 -b273 -s5
-                      -n100 -s1 -S2 -t25
-                      -n100 -s1 -S2 -t33
-                      -n100 -s5 -S7 -t50
-                      -n100 -m0 -e0 -R25 -b25 -i 2 1 0
-                      -n100 -s5 -m3 -R32 -b32</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7 test8</tags>
-      <search_expr_true>PDSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_dlsim.offset">
-      <desc>nr_dlsim Test cases. (Test1: 106 PRB 25 PDSCH-Offset),
-                                 (Test2: 106 PRB 51 PDSCH-Offset),
-                                 (Test3: 217 PRB 100 PDSCH-PRBs),
-                                 (Test4: 217 PRB 80 PDSCH-Offset),
-                                 (Test5: 217 PRB 100 PDSCH-PRBs 110 PDSCH-Offset)</desc>
-      <main_exec>nr_dlsim</main_exec>
-      <main_exec_args>-n100 -R106 -a25 -s5
-                      -n100 -R106 -a51 -s5
-                      -n100 -R217 -b100 -s5
-                      -n100 -R217 -a80 -s5
-                      -n100 -R217 -a110 -s5 -b100</main_exec_args>
-      <tags>test1 test2 test3 test4 test5</tags>
-      <search_expr_true>PDSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_dlsim.mcs+mimo">
-      <desc>nr_dlsim Test cases. (Test1: 106 PRBs 50 PDSCH-PRBs MCS Index 27),
-                                 (Test2: 106 PRBs 50 PDSCH-PRBs MCS Index 16),
-                                 (Test3: 106 MCS-TABLE 256 QAM MCS Index 26),
-                                 (Test4: MCS 0, low SNR performance),
-                                 (Test5: 4x4 MIMO, 1 Layer),
-                                 (Test6: 4x4 MIMO, 2 Layers),
-                                 (Test7: 4x4 MIMO, 4 Layers)</desc>
-      <main_exec>nr_dlsim</main_exec>
-      <main_exec_args>-n100 -e27 -s30
-                      -n100 -e16 -s11 -S13
-                      -n100 -q1 -e26 -s30
-                      -n100 -e0 -t95 -S-1.0 -i 2 1 0
-                      -n10 -s20 -U 3 0 0 2 -gA -x1 -y4 -z4
-                      -n10 -s20 -U 3 0 0 2 -gA -x2 -y4 -z4
-                      -n10 -s20 -U 3 0 0 2 -x4 -y4 -z4</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7</tags>
-      <search_expr_true>PDSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_dlsim.dmrs+ptrs">
-      <desc>nr_dlsim Test cases. (Test1: 3 PTRS, 8 Interpolated Symbols),
-                                 (Test2: 6 PTRS, 5 Interpolated Symbols),
-                                 (Test3: 11 PTRS, 0 Interpolated Symbols),
-                                 (Test4: Mapping type A, 2 DMRS Symbols),
-                                 (Test5: Mapping type A, 3 DMRS Symbols),
-                                 (Test6: Mapping type B, 4 DMRS Symbols)</desc>
-      <main_exec>nr_dlsim</main_exec>
-      <main_exec_args>-n100 -s5 -T 2 2 2
-                      -n100 -s5 -T 2 1 2
-                      -n100 -s5 -T 2 0 4
-                      -n100 -s5 -S7 -U 2 0 1
-                      -n100 -s5 -S7 -U 2 0 2
-                      -n100 -s5 -S7 -U 2 1 3</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6</tags>
-      <search_expr_true>PDSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-     <testCase id="nr_dlschsim">
-      <desc>nr_dlschsim Test cases. (Test1: 106 PRB),
-                                    (Test2: 217 PRB),
-                                    (Test3: 273 PRB)</desc>
-      <main_exec>nr_dlschsim</main_exec>
-      <main_exec_args>-R 106 -m9 -s13 -n100
-                      -R 217 -m15 -s15 -n100
-                      -R 273 -m19 -s20 -n100</main_exec_args>
-      <tags>test1 test2 test3</tags>
-      <search_expr_true>PDSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase> 
-
-    <testCase id="smallblocktest">
-      <desc>shortblocktest Test cases. (Test1: 3 bits),
-                                       (Test2: 6 bits),
-                                       (Test3: 7 bits),
-                                       (Test4: 11 bits)</desc>
-      <main_exec>smallblocktest</main_exec>
-      <main_exec_args>-l 3 -s -4 -d 1 -i 10000
-                      -l 6 -s -4 -d 1 -i 10000
-                      -l 7 -s -4 -d 1 -i 10000
-                      -l 11 -s -4 -d 1 -i 10000</main_exec_args>
-      <tags>test1 test2 test3 test4</tags>
-      <search_expr_true>BLER= 0.000000</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    
-    <testCase id="nr_ulschsim">
-      <desc>nr_ulschsim Test cases. (Test1: 106 PRBs),
-                                    (Test2: 217 PRBs),
-                                    (Test3: 273 PRBs)
-                                    (Test4: 106 PRBs 4-layer MIMO)</desc>
-      <main_exec>nr_ulschsim</main_exec>
-      <main_exec_args>-R 106 -m9 -s13 -n100
-                      -R 217 -m15 -s15 -n100
-                      -R 273 -m19 -s20 -n100
-                      -R 106 -m9 -s13 -n100 -y4 -z4 -W4</main_exec_args>
-      <tags>test1 test2 test3 test4</tags>
-      <search_expr_true>PUSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="nr_pucchsim">
-      <desc>nr_pucchsim Test cases. (Test1: Format 0 1-bit ACK miss 106 PRB),
-                                    (Test2: Format 0 2-bit ACK miss 106 PRB),
-                                    (Test3: Format 0 2-bit ACK miss, 1-bit SR 106 PRB),
-                                    (Test4: Format 2 3-bit 2/106 PRB),
-                                    (Test5: Format 2 4-bit 2/106 PRB),
-                                    (Test6: Format 2 5-bit 2/106 PRB),
-                                    (Test7: Format 2 6-bit 2/106 PRB),
-                                    (Test8: Format 2 7-bit 2/106 PRB),
-                                    (Test9: Format 2 8-bit 2/106 PRB),
-                                    (Test10: Format 2 9-bit 2/106 PRB),
-                                    (Test11: Format 2 10-bit 2/106 PRB),
-                                    (Test12: Format 2 11-bit 2/106 PRB),
-                                    (Test13: Format 2 12-bit 4/106 PRB),
-                                    (Test14: Format 2 19-bit 4/106 PRB),
-                                    (Test15: Format 2 12-bit 8/106 PRB),
-                                    (Test16: Format 2 19-bit 8/106 PRB),
-                                    (Test17: Format 2 32-bit 8/106 PRB),
-                                    (Test18: Format 2 32-bit 16/106 PRB),
-                                    (Test19: Format 2 64-bit 16/106 PRB),
-                                    (Test20: Format 0 1-bit Ack miss 273 PRB),
-                                    (Test21: Format 0 2-bit Ack miss 273 PRB),
-                                    (Test22: Format 0 2-bit Ack miss+SR 273 PRB),
-                                    (Test23: Format 2 4-bit 2/273 PRB),
-                                    (Test24: Format 2 7-bit 2/273 PRB),
-                                    (Test25: Format 2 11-bit 2/273 PRB),
-                                    (Test26: Format 2 12-bit 8/273 PRB),
-                                    (Test27: Format 2 19-bit 8/273 PRB),
-                                    (Test28: Format 2 64-bit 16/273 PRB),
-                                    (Test29: Format 2 64-bit 16/273 PRB Delay 2us)</desc>
-      <main_exec>nr_pucchsim</main_exec>
-      <main_exec_args>-R 106 -i 1 -P 0 -b 1 -s-2 -n1000
-                      -R 106 -i 1 -P 0 -b 2 -s-2 -n1000
-                      -R 106 -i 1 -P 0 -b 2 -s-2 -c -n1000
-                      -R 106 -i 1 -P 2 -b 3 -s0 -n1000
-                      -R 106 -i 1 -P 2 -b 4 -s0 -n1000
-                      -R 106 -i 1 -P 2 -b 5 -s1 -n1000
-                      -R 106 -i 1 -P 2 -b 6 -s2 -n1000
-                      -R 106 -i 1 -P 2 -b 7 -s3 -n1000
-                      -R 106 -i 1 -P 2 -b 8 -s4 -n1000
-                      -R 106 -i 1 -P 2 -b 9 -s5 -n1000
-                      -R 106 -i 1 -P 2 -b 10 -s6 -n1000
-                      -R 106 -i 1 -P 2 -b 11 -s6 -n1000
-                      -R 106 -i 1 -P 2 -q4 -b 12 -s-3 -n1000
-                      -R 106 -i 1 -P 2 -q4 -b 19 -s-3 -n1000
-                      -R 106 -i 1 -P 2 -q8 -b 12 -s-3 -n1000
-                      -R 106 -i 1 -P 2 -q8 -b 19 -s-3 -n1000
-                      -R 106 -i 1 -P 2 -q8 -b 32 -s-3 -n1000
-                      -R 106 -i 1 -P 2 -q16 -b 32 -s-3 -n1000
-                      -R 106 -i 1 -P 2 -q16 -b 64 -s-3 -n1000
-                      -R 273 -z8 -i 1 -P 0 -b 1 -s-2 -n1000
-                      -R 273 -z8 -i 1 -P 0 -b 2 -s-2 -n1000
-                      -R 273 -z8 -i 1 -P 0 -b 2 -s-2 -c -n1000
-                      -R 273 -z8 -i 1 -P 2 -b 4 -s-10 -n1000
-                      -R 273 -z8 -i 1 -P 2 -b 7 -s3 -n1000
-                      -R 273 -z8 -i 1 -P 2 -b 11 -s6 -n1000
-                      -R 273 -z8 -i 1 -P 2 -q8 -b 12 -s-3 -n1000
-                      -R 273 -z8 -i 1 -P 2 -q8 -b 19 -s-3 -n1000
-                      -R 273 -z8 -i 1 -P 2 -q16 -b 64 -s-3 -n1000
-                      -R 273 -z8 -i 1 -P 2 -q16 -b 64 -s-3 -d 2 -n1000</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7 test8 test9 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29</tags>
-      <search_expr_true>PUCCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-
-    <testCase id="dlsim_tm4">
-      <desc>dlsim_tm4 test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
-                                 (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
-                                 (Test 6, 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                                 (Test 6b, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
-                                 (Test 7, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
-                                 (Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
-                                 (Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
-                                 (Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
-                                 (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
-                                 (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
-                                 (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
-       </desc>
-      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim_tm4</main_exec>
-      <main_exec_args>-m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70
-                      -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70
-                      -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70
-                      -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70
-                      -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30
-                      -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30
-                      -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70
-                      -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70
-                      -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70
-                      -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70
-                      -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70</main_exec_args>
-      <tags>test1 test5 test6 test6b test7 test7b test10 test10b test11 TM2_test1 TM2_test1b</tags>
-      <search_expr_true>"passed"</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="nr_ulsim.misc">
-      <desc>nr_ulsim Test cases. (Test1: MCS 9 106 PRBs),
-                                 (Test2: MCS 16 50 PRBs),
-                                 (Test3: MCS 28 50 PRBs),
-                                 (Test4: MCS 27 50 PRBs 256QAM),
-                                 (Test5: MCS 9 217 PRBs),
-                                 (Test6: MCS 9 273 PRBs),
-                                 (Test7: PUSCH Type A, 2 DMRS Symbols),
-                                 (Test8: PUSCH Type A, 3 DMRS, 4 PTRS, 5 Interpolated Symbols),
-                                 (Test9: PUSCH Type B, 3 DMRS, 2 PTRS, 7 Interpolated Symbols),
-                                 (Test10: PUSCH Type B, 3 DMRS, 2 PTRS, 3 Interpolated Symbols),
-                                 (Test11: 25 PRBs, 15 kHz SCS),
-                                 (Test12: 32 PRBs, 120 kHz SCS),
-                                 (Test13: MCS 0, low SNR performance)
-                                 (Test14: MCS 28, 106 PRBs, Time shift 8)
-                                 (Test15: SRS, SNR 40 dB)</desc>
-      <main_exec>nr_ulsim</main_exec>
-      <main_exec_args>-n100 -m9 -r106 -s5
-                      -n100 -m16 -s10
-                      -n100 -m28 -s20
-                      -n100 -m27 -s25 -q1
-                      -n100 -m9 -R217 -r217 -s5
-                      -n100 -m9 -R273 -r273 -s5
-                      -n100 -s5 -U 0,1,1,1
-                      -n100 -s5 -T 1,2 -U 0,2,1,1
-                      -n100 -s5 -T 2,2 -U 1,2,1,1
-                      -n100 -s5 -a4 -b8 -T 1,2 -U 1,3,1,1
-                      -n100 -u0 -m0 -R25 -r25 -i 1,0
-                      -n100 -s5 -r32 -R32 -u3
-                      -n100 -m0 -S -0.6 -i 1,0
-                      -n100 -m 28 -R106 -r106 -t90 -s24 -S24 -d 8
-                      -n100 -s40 -E 1</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7 test8 test9 test10 test11 test12 test13 test14 test15</tags>
-      <search_expr_true>PUSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="nr_ulsim.sc-fdma">
-      <desc>nr_ulsim Test cases. (Test1: SC-FDMA, 50 PRBs),
-                                 (Test2: SC-FDMA, 75 PRBs),
-                                 (Test3: SC-FDMA, 216 PRBs),
-                                 (Test4: SC-FDMA, 273 PRBs),
-                                 (Test5: SC-FDMA, 3 DMRS)</desc>
-      <main_exec>nr_ulsim</main_exec>
-      <main_exec_args>-n100 -s5 -Z
-                      -n100 -s5 -Z -r75
-                      -n50 -s5 -Z -r216 -R217
-                      -n50 -s5 -Z -r270 -R273
-                      -n100 -s5 -Z -U 0,2,1,2</main_exec_args>
-      <tags>test1 test2 test3 test4 test5</tags>
-      <search_expr_true>PUSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="nr_ulsim.mimo">
-      <desc>nr_ulsim Test cases. (Test1: MCS 19 50 PRBs 2 RX_Antenna),
-                                 (Test2: MCS 9 106 PRBs MIMO 2 layers),
-                                 (Test3: MCS 10 106 PRBs MIMO 2 layers),
-                                 (Test4: MCS 19 106 PRBs MIMO 2 layers),
-                                 (Test5: MCS 9 106 PRBs MIMO 4 layers)</desc>
-      <main_exec>nr_ulsim</main_exec>
-      <main_exec_args>-n100 -m19 -s10 -S15 -z2
-                      -n100 -m9 -r106 -s8 -W2 -y2 -z2
-                      -n100 -m10 -r106 -s12 -W2 -y2 -z2
-                      -n100 -m19 -r106 -s22 -W2 -y2 -z2
-                      -n100 -m9 -r106 -s10 -W4 -y4 -z4</main_exec_args>
-      <tags>test1 test2 test3 test4 test5</tags>
-      <search_expr_true>PUSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="nr_ulsim.3gpp">
-      <desc>nr_ulsim Test cases. (Test1: 3GPP G-FR1-A5-13, PUSCH Type A, 40 MHz BW, 30 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test2: 3GPP G-FR1-A5-13, PUSCH Type A, 40 MHz BW, 30 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test3: 3GPP G-FR1-A5-13, PUSCH Type A, 40 MHz BW, 30 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test4: 3GPP G-FR1-A5-8, PUSCH Type B, 5 MHz BW, 15 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test5: 3GPP G-FR1-A5-8, PUSCH Type B, 5 MHz BW, 15 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test6: 3GPP G-FR1-A5-8, PUSCH Type B, 5 MHz BW, 15 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test7: 3GPP G-FR1-A5-9, PUSCH Type B, 10 MHz BW, 15 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test8: 3GPP G-FR1-A5-9, PUSCH Type B, 10 MHz BW, 15 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test9: 3GPP G-FR1-A5-9, PUSCH Type B, 10 MHz BW, 15 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test10: 3GPP G-FR1-A5-10, PUSCH Type B, 20 MHz BW, 15 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test11: 3GPP G-FR1-A5-10, PUSCH Type B, 20 MHz BW, 15 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test12: 3GPP G-FR1-A5-10, PUSCH Type B, 20 MHz BW, 15 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test13: 3GPP G-FR1-A5-11, PUSCH Type B, 10 MHz BW, 30 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test14: 3GPP G-FR1-A5-11, PUSCH Type B, 10 MHz BW, 30 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test15: 3GPP G-FR1-A5-11, PUSCH Type B, 10 MHz BW, 30 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test16: 3GPP G-FR1-A5-12, PUSCH Type B, 20 MHz BW, 30 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test17: 3GPP G-FR1-A5-12, PUSCH Type B, 20 MHz BW, 30 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test18: 3GPP G-FR1-A5-12, PUSCH Type B, 20 MHz BW, 30 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test19: 3GPP G-FR1-A5-13, PUSCH Type B, 40 MHz BW, 30 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test20: 3GPP G-FR1-A5-13, PUSCH Type B, 40 MHz BW, 30 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test21: 3GPP G-FR1-A5-13, PUSCH Type B, 40 MHz BW, 30 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test22: 3GPP G-FR1-A5-14, PUSCH Type B, 100 MHz BW, 30 kHz SCS, 2 RX Antennas Requirements Test),
-                                 (Test23: 3GPP G-FR1-A5-14, PUSCH Type B, 100 MHz BW, 30 kHz SCS, 4 RX Antennas Requirements Test),
-                                 (Test24: 3GPP G-FR1-A5-14, PUSCH Type B, 100 MHz BW, 30 kHz SCS, 8 RX Antennas Requirements Test),
-                                 (Test25: 3GPP G-FR1-A3-27, PUSCH Type B, 40 MHz BW, 30 kHz SCS, 2 RX Antennas Requirements Test, 2 layers),
-                                 (Test26: 3GPP G-FR1-A3-27, PUSCH Type B, 40 MHz BW, 30 kHz SCS, 4 RX Antennas Requirements Test, 2 layers),
-                                 (Test27: 3GPP G-FR1-A4-27, PUSCH Type B, 40 MHz BW, 30 kHz SCS, 2 RX Antennas Requirements Test, 2 layers),
-                                 (Test28: 3GPP G-FR1-A4-27, PUSCH Type B, 40 MHz BW, 30 kHz SCS, 4 RX Antennas Requirements Test, 2 layers)</desc>
-      <main_exec>nr_ulsim</main_exec>
-      <main_exec_args>-n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R106 -r106 -U 0,1,1,2 -z2 -s12.4 -S12.4
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R106 -r106 -U 0,1,1,2 -z4 -s8.5 -S8.5
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R106 -r106 -U 0,1,1,2 -z8 -s5.4 -S5.4
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R25 -r25 -U 1,1,1,2 -z2 -s12.5 -S12.5
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R25 -r25 -U 1,1,1,2 -z4 -s8.9 -S8.9
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R25 -r25 -U 1,1,1,2 -z8 -s5.7 -S5.7
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R52 -r52 -U 1,1,1,2 -z2 -s12.6 -S12.6
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R52 -r52 -U 1,1,1,2 -z4 -s8.9 -S8.9
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R52 -r52 -U 1,1,1,2 -z8 -s5.8 -S5.8
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R106 -r106 -U 1,1,1,2 -z2 -s12.3 -S12.3
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R106 -r106 -U 1,1,1,2 -z4 -s8.8 -S8.8
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 0 -m20 -R106 -r106 -U 1,1,1,2 -z8 -s5.7 -S5.7
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R24 -r24 -U 1,1,1,2 -z2 -s12.5 -S12.5
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R24 -r24 -U 1,1,1,2 -z4 -s8.6 -S8.6
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R24 -r24 -U 1,1,1,2 -z8 -s5.6 -S5.6
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R51 -r51 -U 1,1,1,2 -z2 -s12.5 -S12.5
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R51 -r51 -U 1,1,1,2 -z4 -s8.6 -S8.6
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R51 -r51 -U 1,1,1,2 -z8 -s5.6 -S5.6
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R106 -r106 -U 1,1,1,2 -z2 -s12.5 -S12.5
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R106 -r106 -U 1,1,1,2 -z4 -s8.7 -S8.7
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R106 -r106 -U 1,1,1,2 -z8 -s5.5 -S5.5
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R273 -r273 -U 1,1,1,2 -z2 -s13.1 -S13.1
-                      -n100 -b14 -I7 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R273 -r273 -U 1,1,1,2 -z4 -s9.2 -S9.2
-                      -n100 -b14 -I8 -i 0,1 -g A,l,10 -t70 -u 1 -m20 -R273 -r273 -U 1,1,1,2 -z8 -s5.9 -S5.9
-                      -n100 -b14 -I15 -i 0,1 -g B,l -t70 -u 1 -m2 -R106 -r106 -U 1,1,1,2 -W2 -y2 -z2 -s1.7 -S1.7
-                      -n100 -b14 -I15 -i 0,1 -g B,l -t70 -u 1 -m2 -R106 -r106 -U 1,1,1,2 -W2 -y2 -z4 -s-2.1 -S-2.1
-                      -n100 -b14 -I15 -i 0,1 -g C,l -t70 -u 1 -m16 -R106 -r106 -U 1,1,1,2 -W2 -y2 -z2 -s18.7 -S18.7
-                      -n100 -b14 -I15 -i 0,1 -g C,l -t70 -u 1 -m16 -R106 -r106 -U 1,1,1,2 -W2 -y2 -z4 -s11.2 -S11.2</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7 test8 test9 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 test20 test21 test22 test23 test24 test25 test26 test27 test28</tags>
-      <search_expr_true>PUSCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="nr_prachsim">
-      <desc>nr_prachsim Test cases. (Test1: 30kHz SCS, 106 PRBs, Prach format A2),
-                                    (Test2: 30kHz SCS, 217 PRBs, Prach format A2),
-                                    (Test3: 30kHz SCS, 273 PRBs, Prach format A2),
-                                    (Test4: 30kHz SCS, 106 PRBs, Prach format 0),
-                                    (Test5: 120kHz SCS, 32 PRBs, Prach format A2),
-                                    (Test6: 120kHz SCS, 66 PRBs, Prach format A2),
-                                    (Test7: 120kHz SCS, 66 PRBs, High Speed Enabled),
-                                    (Test8: 15kHz SCS, 25 PRBs)</desc>
-      <main_exec>nr_prachsim</main_exec>
-      <main_exec_args>-a -s -30 -n 100 -p 63 -R 106
-                      -a -s -30 -n 100 -p 63 -R 217
-                      -a -s -30 -n 100 -p 63 -R 273
-                      -a -s -30 -n 100 -p 63 -R 106 -c 4
-                      -a -s -30 -n 100 -p 32 -R 32 -m 3 -c52
-                      -a -s -30 -n 100 -p 32 -R 66 -m 3 -c52
-                      -a -s -30 -n 100 -R 66 -m 3 -c52 -H
-                      -a -s -30 -n 100 -p 99 -R 25 -m 0</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7 test8</tags>
-      <search_expr_true>PRACH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-
-    <testCase id="nr_psbchsim">
-      <desc>NR-Sidelink PSBCH test cases. (Test1: SLSS Search),
-                                          (Test2: PSBCH TxRx)</desc>
-      <main_exec>nr_psbchsim</main_exec>
-      <main_exec_args>-I
-                      -n 10</main_exec_args>
-      <tags>test1 test2</tags>
-      <search_expr_true>PSBCH test OK</search_expr_true>
-      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
-      <nruns>3</nruns>
-    </testCase>
-  </testCaseList>

cmake_targets/tools/build_helper

@@ -550,7 +550,6 @@ check_install_additional_tools (){
         libforms-bin \
         libforms-dev \
         libxft-dev \
-        xmlstarlet \
         libpcre3-dev \
         libssh-dev \
         libxml2-dev"
@@ -563,7 +562,6 @@ check_install_additional_tools (){
       libXft-devel \
       xforms \
       xforms-devel \
-      xmlstarlet \
       pcre-devel \
       libssh-devel \
       libxml2-devel"

doc/physical-simulators.md

@@ -32,104 +32,5 @@ These are the simulators known to work properly and tested in CI:
   `nr_pbchsim`, `nr_prachsim`, `nr_pucchsim`, `polartest`, `smallblocktest`,
   `nr_psbchsim` (sidelink)
 
-# How to run
-
-You first have to build simulators:
-
-```bash
-cd openairinterface5g/
-. oaienv                 # important for the run_exec_autotests.bash script
-cd cmake_targets/
-./build_oai --ninja -P
-```
-
-This builds the simulators in the default build directory `ran_build/build`
-(all paths given here are relative to `cmake_targets/` in the root of
-`openairinterface5g/`). To run all simulators in this default build directory
-of above `build_oai` invocation, run the `run_exec_autotests.bash` script:
-```bash
-autotests/run_exec_autotests.bash
-```
-
-This runs all simulations as defined in `autotests/test_case_list.xml`.
-
-To run a group of tests, you can specify the group using `-g`. You can also
-specify the build directory, after building the simulators, which, for the
-default directory, is:
-
-```bash
-autotests/run_exec_autotests.bash -g "nr_dlsim.basic" -d ran_build/build/
-```
-
-This will run the `nr_dlsim.basic` group, as listed in
-`autotests/test_case_list.xml`.
-
-## How to interpret the output
-
-From the output, you can see the invoked tests, its parameters, and the log files.
-Example:
-
-```
-[user@oai cmake_targets]$ autotests/run_exec_autotests.bash -g "nr_dlsim.basic" -d ran_build/build/
-[...]
-Test case nr_dlsim.basic match found in group
-name = nr_dlsim.basic
-Description = nr_dlsim Test cases. (Test1: 106 PRB),
-                                 (Test2: 217 PRB),
-                                 (Test3: 273 PRB),
-                                 (Test4: HARQ test 25% TP 4 rounds),
-                                 (Test5: HARQ test 33% TP 3 rounds),
-                                 (Test6: HARQ test 50% TP 2 rounds),
-                                 (Test7: 25 PRBs, 15 kHz SCS)
-main_exec = ran_build/build//nr_dlsim
-main_exec_args = -n100 -R106 -b106 -s5
-                      -n100 -R217 -b217 -s5
-                      -n100 -R273 -b273 -s5
-                      -n100 -s1 -S2 -t25
-                      -n100 -s1 -S2 -t33
-                      -n100 -s5 -S7 -t50
-                      -n100 -m0 -e0 -R25 -b25 -i 2 1 0
-search_expr_true = PDSCH test OK
-search_expr_false = segmentation fault|assertion|exiting|fatal
-tags = test1 test2 test3 test4 test5 test6 test7
-nruns = 3
-i = PDSCH test OK
-Test1: 106 PRB
-Executing test case nr_dlsim.basic.test1, Run Index = 1, Execution Log file = /home/oai/openairinterface5g/cmake_targets/autotests/log/nr_dlsim.basic/test.nr_dlsim.basic.test1.run_1
-Executing test case nr_dlsim.basic.test1, Run Index = 2, Execution Log file = /home/oai/openairinterface5g/cmake_targets/autotests/log/nr_dlsim.basic/test.nr_dlsim.basic.test1.run_2
-Executing test case nr_dlsim.basic.test1, Run Index = 3, Execution Log file = /home/oai/openairinterface5g/cmake_targets/autotests/log/nr_dlsim.basic/test.nr_dlsim.basic.test1.run_3
-[...]
-nr_dlsim.basic.test1 RUN = 1 Result = PASS
-nr_dlsim.basic.test1 RUN = 2 Result = PASS
-nr_dlsim.basic.test1 RUN = 3 Result = PASS
-execution nr_dlsim.basic.test1 {Test1: 106 PRB} Run_Result = " Run_1 =PASS Run_2 =PASS Run_3 =PASS"  Result = PASS
-```
-
-You see:
-- the `Description` of the test cases (here, 7 tests)
-- the executable that is used, and the parameters (`main_exec` and
-  `main_exec_args`), for instance `-n100 -R106 -b106 -s5` for `Test1`
-- what is the condition for a successful test
-- where are the log files
-- if the tests passed or not `PASS`, otherwise `FAIL` and a summary for the
-  three runs.
-
-## How to change the parameters
-
-You can modify the parameters in `autotests/test_case_list.xml`. To learn about
-their meaning, run the simulator manually with flag `-h` ("help"). For
-instance, for the above run, it would be
-
-```bash
-ran_build/build/nr_dlsim -h
-```
-
-## How to change the code
-
-You can modify the source files to adapt to your needs. For instance, for
-`nr_dlsim` above, refer to file `openair1/SIMULATION/NR_PHY/dlsim.c`.
-
-# CI
-
 These tests are run in this pipeline:
 [RAN-PhySim-Cluster](https://jenkins-oai.eurecom.fr/job/RAN-PhySim-Cluster/).