yigid/openairinterface5g
1
0
Fork 0
mirror of https://gitlab.eurecom.fr/oai/openairinterface5g.git synced 2026-07-13 04:30:28 +00:00
Code Issues Packages Projects Releases Wiki Activity

Commiting compiled firmware for new bitstream. Backwards compatibility with older bitstreams is ensured.

Browse Source 
git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4070 818b1a75-f10b-46b9-bf7c-635c3b92a50f
This commit is contained in:
Florian Kaltenberger
2013-08-12 08:51:59 +00:00
parent b91caeabed
commit e27c3f3f17
3 changed files with 70 additions and 33 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
targets/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v9 Executable file
View File

Binary file not shown.

34
targets/RTAI/USER/init_exmimo2.sh
View File

@@ -1,22 +1,44 @@
#!/bin/bash
PCI=`lspci -m | grep Xilinx`
if [ -z "$PCI" ]; then
echo "No card found. Stopping!"
retur
fi
sudo rmmod openair_rf
sudo insmod $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom/openair_rf.ko
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
sleep 1
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
if [ ! -e /dev/openair0 ]; then
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
fi
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
if [ $(($DEVICE%100)) == 8 ]; then
echo "Using firmware version 8"
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
else
if [ $(($DEVICE%100)) == 9 ]; then
echo "Using firmware version 9"
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v9
else
echo 'No corresponding firmware found'
return
fi
fi
sudo rmmod nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
if [ $1 = "eNB" ]; then
if [ "$1" = "eNB" ]; then
echo "bring up oai0 interface for enb"
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 3
else
if [ $1 = "UE" ]; then
if [ "$1" = "UE" ]; then
echo "bring up oai0 interface for UE"
sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 3

69
targets/RTAI/USER/lte-softmodem.c
View File

@@ -897,8 +897,8 @@ int main(int argc, char **argv) {
u32 rf_mode_byp[4] = {22991,22991,22991,22991};
*/
u32 my_rf_mode = RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX;
u32 my_rf_mode2 = RXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX;
u32 rf_mode[4] = {my_rf_mode,my_rf_mode2,0,0};
u32 rf_mode_base = TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM;
u32 rf_mode[4] = {my_rf_mode,0,0,0};
u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
@@ -1096,9 +1096,28 @@ int main(int argc, char **argv) {
frame_parms->Ncp_UL = 0;
frame_parms->Nid_cell = Nid_cell;
frame_parms->nushift = 0;
frame_parms->nb_antennas_tx_eNB = 1; //initial value overwritten by initial sync later
frame_parms->nb_antennas_tx = (UE_flag==0) ? 1 : 1;
frame_parms->nb_antennas_rx = (UE_flag==0) ? 1 : 1;
if (UE_flag==0) {
switch (transmission_mode) {
case 1:
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
break;
case 2:
case 5:
case 6:
frame_parms->nb_antennas_tx = 2;
frame_parms->nb_antennas_rx = 1;
break;
default:
printf("Unsupported transmission mode %d\n",transmission_mode);
exit(-1);
}
}
else { //UE_flag==1
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
}
frame_parms->nb_antennas_tx_eNB = (transmission_mode == 1) ? 1 : 2; //initial value overwritten by initial sync later
frame_parms->mode1_flag = (transmission_mode == 1) ? 1 : 0;
frame_parms->frame_type = 1;
frame_parms->tdd_config = 3;
@@ -1269,7 +1288,7 @@ int main(int argc, char **argv) {
openair_daq_vars.ue_dl_rb_alloc=0x1fff;
openair_daq_vars.target_ue_dl_mcs=20;
openair_daq_vars.ue_ul_nb_rb=6;
openair_daq_vars.target_ue_ul_mcs=11;
openair_daq_vars.target_ue_ul_mcs=12;
// if AGC is off, the following values will be used
// for (i=0;i<4;i++)
@@ -1309,13 +1328,24 @@ int main(int argc, char **argv) {
printf("Card %d: ExpressMIMO %d, HW Rev %d, SW Rev 0x%d\n", card, p_exmimo_id->board_exmimoversion, p_exmimo_id->board_hwrev, p_exmimo_id->board_swrev);
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = 0;
if (p_exmimo_id->board_swrev>=BOARD_SWREV_CNTL2)
p_exmimo_config->framing.eNB_flag = 0;
else
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
p_exmimo_config->framing.resampling_factor = 2;
for (ant=0;ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant++)
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
for (ant=0;ant<frame_parms->nb_antennas_tx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
for (ant=0;ant<frame_parms->nb_antennas_rx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
for (ant=max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant<4;ant++) {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
carrier_freq[1] = 0; //don't use this LIME for card 1
carrier_freq[2] = 0; //don't use this LIME for card 1
carrier_freq[3] = 0; //don't use this LIME for card 1
for (ant = 0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[ant];
@@ -1340,21 +1370,6 @@ int main(int argc, char **argv) {
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 63;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 63;
}
if (UE_flag) {
p_exmimo_config->rf.rf_mode[0] = my_rf_mode;
p_exmimo_config->rf.rf_mode[1] = 0;
//p_exmimo_config->rf.rf_mode[1] = my_rf_mode;
p_exmimo_config->rf.rf_mode[2] = 0;
p_exmimo_config->rf.rf_mode[3] = 0;
}
else {
p_exmimo_config->rf.rf_mode[0] = my_rf_mode;
p_exmimo_config->rf.rf_mode[1] = 0;
//p_exmimo_config->rf.rf_mode[1] = my_rf_mode;
p_exmimo_config->rf.rf_mode[2] = 0;
p_exmimo_config->rf.rf_mode[3] = 0;
}
dump_frame_parms(frame_parms);
@@ -1410,7 +1425,7 @@ int main(int argc, char **argv) {
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
PHY_vars_UE_g[0]->lte_ue_common_vars.txdata[aa][i] = 0x00010001;
p_exmimo_config->framing.tdd_config = TXRXSWITCH_TESTRX;
//p_exmimo_config->framing.tdd_config = TXRXSWITCH_TESTRX;
}
else {
setup_eNB_buffers(PHY_vars_eNB_g[0],frame_parms,0);