- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
- Set default attach_timeout to 40s
- Increase timeout only after failed attach attempts
This modification addresses an issue in the RFSim-5G 2x2 test where the UE
often fails to attach within the initial 20s window. The timeout may cause
the UE to restart, which leads to two UEs appearing in the gNB log. By
increasing the initial timeout to 40s, we avoid unnecessary restarts.
check for IP once before sleeping in case UE IP address exists, which
should speed up the CI. With this, Only print the actual attach command
once. Print errors only at the beginning. This should simplify attach
command output logs.
As parent. The second change has no escape sequence, but since it's also
a regex, mark it as raw for uniformity (it doesn't hurt either).
ci-scripts/cls_module.py:165: SyntaxWarning: invalid escape sequence '\.'
result = re.search('inet (?P<ip>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)', output.stdout)
Use the core network class to configure one "end" of these tests. This
will make the tests more generic and predictable, as they are explicitly
configured through two ci_infra.yaml "entities", instead of some
implicit "EPC" IP address given in configuration.
As of this commit, no XML passes this info into the framework, so no XML
step will work. As it is many changes, the following commits will add
the necessary info one by one.
pyflakes warns about various errors, addressed here. For cls_cluster.py,
remove (unknown) sys.exit and replace through Exception, as sys.exit()
has the unwanted effect that the CI script would stop. Instead, raise
an Exception that would show the problem in the HTML, and ensures that
the script runs until the end.
These are the warnings flagged by pyflakes.
cls_cluster.py:297:4: undefined name 'sys'
cls_containerize.py:39:1: 'subprocess' imported but unused
cls_containerize.py:41:1: 'threading' imported but unused
cls_containerize.py:43:1: 'multiprocessing.Process' imported but unused
cls_containerize.py:43:1: 'multiprocessing.Lock' imported but unused
cls_containerize.py:43:1: 'multiprocessing.SimpleQueue' imported but unused
cls_containerize.py:49:1: 'cls_cluster as OC' imported but unused
cls_containerize.py:50:1: redefinition of unused 'cls_cmd' from line 42
cls_module.py:28:1: 'os' imported but unused
cls_module.py:29:1: 'sys' imported but unused
cls_module.py:34:1: 'subprocess' imported but unused
cls_module.py:35:1: 'datetime.datetime' imported but unused
cls_module.py:211:11: undefined name 'sshconnection'
cls_oaicitest.py:37:1: 'pexpect' imported but unused
cls_oaicitest.py:47:1: 'cls_cluster as OC' imported but unused
cls_oaicitest.py:54:1: 'matplotlib.pyplot as plt' imported but unused
cls_oaicitest.py:55:1: 'numpy as np' imported but unused
cls_oai_html.py:34:1: 'sys' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.Process' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.Lock' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.SimpleQueue' imported but unused
cls_physim.py:37:1: 'multiprocessing.SimpleQueue' imported but unused
cls_static_code_analysis.py:39:1: 'time' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.Process' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.Lock' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.SimpleQueue' imported but unused
epc.py:41:1: 'multiprocessing.Process' imported but unused
epc.py:41:1: 'multiprocessing.Lock' imported but unused
epc.py:41:1: 'multiprocessing.SimpleQueue' imported but unused
main.py:60:1: 'pexpect' imported but unused
main.py:66:1: 'datetime' imported but unused
main.py:68:1: redefinition of unused 'subprocess' from line 63
main.py:70:1: 'multiprocessing.Process' imported but unused
main.py:70:1: 'multiprocessing.Lock' imported but unused
main.py:70:1: 'multiprocessing.SimpleQueue' imported but unused
provideUniqueImageTag.py:2:1: 'os' imported but unused
- Modify CN deployment and termination functions to include namespace and path parameters.
- Update `Module_UE` class with new attributes for namespace and CN path.
- Integrate `cnID` for OC CN deployment and termination in `epc.py`.
- Extract `cn_id` from XML configurations for CN operations.
- Update XML files to include `cn_id` tag for 5G Core initialization and
termination. (Used in OAIUE and AW2S pipeline, for OC CN deployment. This change
will not affect other CN deployments.)
