Remove CreateTag() and the merge/targetBranch parameters from
CreateWorkspace, passing the final branch name and repository directly
from Jenkins instead. Jenkinsfile computes testBranch and testRepository
(with INTERNAL_REPO as default). create_workspace.sh now does a simple
shallow clone by branch name.
Introduce two optional Jenkins parameters that allow overriding the
default branch reference and git repository URL used across the CI
pipeline.
- customBranch: when set, replaces the entire computed
{sourceBranch}-{commitID}
- customRepository: when set, replaces INTERNAL_REPO as the git remote
used by Create_Workspace to clone the source code onto the test node.
Signed-off-by: Jaroslava Fiedlerova <jaroslava.fiedlerova@openairinterface.org>
CI: Various CI adjustments
- RAN-SA-FHI72-CN5G: activate/inactive carriers on VVDN RU - to check if
it improves reliability and stability of the pipeline
- RAN-SA-FHI72-CN5G: update CN with new IP range - avoid IP address
overlap with CN used in RAN-SA-AERIAL-XXX pipelines
- RAN-SA-B200-Module-SABOX-Container: test with deltaMCS in SC-FDMA test
case
- RAN-NSA-B200-Module-LTEBOX-Container: adjust PRACH DTX threshold to
reduce number of false RA attempts on eNB
- remove retx check in RAN-SA-Multi-Antenna-CN5G and RAN-SA-AERIAL-CN5G -
to avoid false CI failure caused by unsuccessful retx check of
interfering UE
- adjust RAN-SA-Multi-Antenna-CN5G and RAN-SA-AERIAL-CN5G configs to
improve UL throughput
Add vvdn-activate-carriers.sh to verify RU PTP synchronization and
configuration. Activates carriers on VVDN RU by editing sysrepo running
datastore (INACTIVE->ACTIVE).
Add vvdn-inactive-carriers.sh to reverse the operation, setting all
carriers back to INACTIVE via sysrepocfg.
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
This commit inputs several distances at once and obtain the summary of
successful and failed tests. We look for the number of successful tests
that are geater than 0. We do that here since we sometimes dont receive
a response for a telnet command from the rfsim although the command
is applied. This is related to the queing telnet commands in the rfsim.
The script for the distances 50, 100 and 150 are called as follows,
./set-and-verify-distance-prs.sh 50 100 150
The summary can be viewed as follows,
==================== SUMMARY ====================
Total tests run : 3
Successful tests: 3
Failed tests : 0
=================================================
Set RFsim (DL) distance and use PRS to estimate the new distance. This
is verified by comparing the distance set in RFsim with the distance
reported through ToA estimation at the UE.
Note that since RFsim telnet output is asynchronous (it uses a queue
internally), we use grep --max-count 1 to wait for the matching line,
together with ncat --idle 0.3 to keep ncat open for some time. The
--max-count option will terminate grep after the first occurrence. For
this to work reliably, we need to use grep <(echo | ncat) as opposod to
simply echo | ncat | grep, as the latter does not seem to reliably
make grep exit after the occurrence.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Also, don't use "set -x" debugging for oc login command:
ci-scripts/cls_cmd.py:242 sets BASH_XTRACEFD=1, which makes that all
"set -x" output is in stdout, leading to a redirect to the file into
which we redirect. This would lead to the following error with
unsuccessfull oc login:
error: You are not a member of project "****-core-for-ci-ran".
Error from server (Forbidden): imagestreams.image.openshift.io "oai-physim"
is forbidden: User "system:anonymous" cannot get resource "imagestreams" in
API group "image.openshift.io" in the namespace "****-ran"
This fixes basically two problems. First, remove "set -e", which leads
to the script exiting on error. For instance, there was the sleep which
should account for the time of the pod being in "ContainerCreating", but
might not be enough. In that case, the script would exit, leaving the
pod deployed.
Second, a fixed time is not good, as it can be too short and unduly
prolong waiting time. Replace with a loop.
Add OAIUE longrun pipeline
Add a new XML file for OAIUE longrun.
- Test description:
* 40 MHz BW, n78
* gNB with USRP N310, UE with USRP N310
* CN deployed on OC
- Test duration: 1 hour
- Test scenario: 3x DL 10 min test (20 Mbps) + 3x UL 10 min test (5
Mbps)
pods deployed through helm occasionally take more time, leading to
errors such as
Error from server (BadRequest): container "physim" in pod "oai-physims-4g-sczvl" is waiting to start: ContainerCreating
Give a bit more time before checking the logs. We cannot wait too much,
as the container will just end on FINISHED in running state, so the logs
will always be there.
Previously, the script attempted to directly merge ${merge}, which could f
ail if the branch was not already available locally. This update explicitly
fetches the branch from origin and then merges FETCH_HEAD with --ff, ensuring
the merge works even when the branch is missing locally.
A future commit will enable to deploy physical simulators via docker.
Hence:
- Move the script to run out of deploy_oc_physim(), to make it more
generic (later commits will introduce other scripts)
- pass the working directory (the function will be moved into
cls_oaicitest, as it fits neither cls_containerize nor cls_cluster
when deploying the tests from source)
- not using ci-scripts: don't hardcode a specific path, just use the
working directory
- avoid helm-specific pods summary, and put it into the general "physim
logs"
- remove helm-specific "release", and use a generic name for results
- always log pod logs and status to debug, even if deployment was not
successful or tests did not finish.
- call scripts for magma MME-based deployment of OAI 5GC in
ci_infra.yaml
- implement the existing python code through scripts (which does the same)
- save the cql file in the repo, which was previously downloaded every
time
- use for porcepix-cn4g and nano-cn4g (un)deployment, ping, perf, in XML
files
- Use scripts to deploy OpenShift-based 5GC in ci_infra.yaml
- Use for oc-cn5g, oc-cn5g-20897, and oc-cn5g-20897-aerial2
for (un)deployment, ping, iperf in relevant XML files
- Convert hardcoded IP addresses to %cn_ip%
create_workspace.sh used to check out develop by default. However, this
is unnecessary because the script later checks out a specific reference
(which can be a commit ID, which is not accepted by git clone, the
reason we don't check out during clone); the repository will simply be
empty in the beginning, which should not be a problem.
Further, it is problematic because we use this script for the build of
the L2sim proxy, and the repository does not have develop; thus, without
this modification, L2sim proxy build will always fail.
the create_workspace.sh script checks if a branch should be merged into
what we are trying to checkount (i.e., typically develop into
feature-branch). The problem is that it uses a short-hand for an if
branch.
[ -n "${merge}"] && git merge...
If we don't request a merge, [ -n XX ] will evalute to 1, and not do the
git merge. Since it's the last command in the script, this makes the
script return 1 (failure), when it actually succeeded.
Add exit 0 to ensure we return 0 after successful end of the script. If
there is a failure, the script will terminate early. It can be tested by
e.g., giving a wrong commit ID.
Reviewed-by: Jaroslava Fiedlerova <Jaroslava.Fiedlerova@openairinterface.org>
Use a script, which can be tested independently of CI code (by running
it on the host on which it will be used), and print the directory that
has been prepared in the HTML. Also, in the description, use the
infinitive/imperative(?) of the verb to harmonize with other steps.
