After having removed eth_params_t from all L2/L3 files, we can reduce
the scope of common_lib.h, and remove the include from many files.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
The relevant block for each library is now located in the CMakeLists.txt in the same directory as its sources, instead of the root CMakeLists.txt
The libraries have been renamed to follow a lowercase naming
Signed-off-by: Rúben Soares Silva <rsilva@allbesmart.pt>
Further unused arguments cleanup
More fixes for unused function arguments (see #1057),
add_compile_options(-Wunused-parameter) added in folders:
- nfapi
- openair2
- openair3
- USRP
- rfsimulator
Remove a lot of unused code, defines, and config options
Remove unused header files and defines.
Slightly clean up gnb_config.c by removing all _IDX variables. Remove
these unused parameters:
- MACRLCs.[0].num_cc
- MACRLCs.[0].local_n_portc
- MACRLCs.[0].remove_n_portc
- MACRLCs.[0].remote_s_portc
- MACRLCs.[0].remote_s_portd
- L1s.[0].num_cc
- L1s.[0].local_n_portc
Remove the gNB_MAC_INST.eth_params_s, since it's only purpose is to
store what can be on the stack.
For the Aerial log message, don't print an empty prefix but what is
actually used for Aerial.
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Remove the \file directive, as it is always superfluous because the
current file is implicit [1]:
> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.
Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.
Eurecom code has been contributed and was under OAI PL v1.0/v1.1.
For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.
[1] https://www.doxygen.nl/manual/commands.html#cmdfile
Configure DigitalBeamTable in OAI and pass down to Aerial L1
With this MR it will be possible to define a Beamtable in OAI and pass it down
to a L1 (Aerial or OAI) which then will either use them locally to apply
static beamforming (Split 8 with USRP) or pass them down to the RU using 7.2
split with Section Extension 1.
Change Aerial to pack directly in nvIPC message buffer
This MR changes the Aerial pack/send procedures to pack the messages
directly into the nvIPC message buffers.
This saves the use of some memcopy calls, as well as clean up the code.
The P7 message packing/send is now only handled in the file
`fapi_nv_p7.c`
Add 3 functions in fapi_nvIPC.c to allow message allocation, release and
send from fapi_vnf_p7.c
Add 2 functions to access the memory pool sizes allocated from nvIPC, as
we can't use sizeof to report the buffer size to the packing functions
Remove now unused aerial_send_P5_msg , aerial_send_P7_msg and
aerial_send_P7_msg_with_data functions
Now Aerial only has one function to handle sending P5 and another to
send P7 messages
Remove fapi_phy_api_msg from fapi_nvIPC.h as it is duplicated in
nr_fapi.h
Prevent the PNF from sending P7 messages after sending a STOP.indication
Upon stopping the PNF, when sending the STOP.indication to the VNF, set
pnf_p7->terminate to 1.
Add a check on the PNF P7 send functions to not send a message after
pnf_p7->terminate is set.
This prevents the PNF from sending SLOT.indications after stopping,
which sometimes was causing the VNF to process a SLOT.indication after
it had received the indication to STOP.
Also, this MR adds a sanity check on the VNF P7 message handler to
ignore any P7 messages it receives after having it's own terminate flag
set to 1
This MR closes issue #1045
Upon stopping the PNF, when sending the STOP.indication to the VNF, set pnf_p7->terminate to 1.
Add a check on the PNF P7 send functions to not send a message after pnf_p7->terminate is set
Current FAPI slot_ahead value for WLS is too low for UL, as we see these
errors:
[NR_MAC] Unexpected ULSCH HARQ PID 14 (have 3) for RNTI 0xa68e
[NR_MAC] UE a68e expected HARQ pid 3 feedback at 586. 7, but is at 587.17 instead (HARQ feedback is in the past)
Similarly to nFAPI, scale it by mu (for mu=1 => slot_ahead=2) to give
additional time, which removes these warnings at the VNF.
Implementation of STOP exchange
This implements the STOP.request/indication for all 3 transport mechanisms, the
VNF will send the STOP.request to the PNF, indicating it will disconnect, and
await a STOP.indication from the PNF
The WLS VNF is reworked to be able to start before the PNF, by calling call
rte_eal_init and rte_dev_probe to determine if dpdk has been initialized
properly, before calling rte_eal_init in the intended process when it is
appropriate to do so
Reimplement nFAPI message exchange between L1 and L2 following the
changes in parent commit removing msgDataTx.
Avoid direct calls and use NR_IF_module fptrs to avoid linking problems.
allowing to remove some function definitions that are not needed.
This implements the STOP.request/indication for all 3 transport mechanisms, the VNF will send the STOP.request to the PNF, indicating it will disconnect, and await a STOP.indication from the PNF
The WLS VNF is reworked to be able to start before the PNF, by calling call rte_eal_init and rte_dev_probe to determine if dpdk has been initialized properly, before calling rte_eal_init in the intended process when it is appropriate to do so
The WLS VNF is reworked to be able to start before the PNF, by calling call rte_eal_init and rte_dev_probe to determine if dpdk has been initialized properly, before calling rte_eal_init in the intended process when it is appropriate to do so
This allows access to the VNF configuration in the various transport mechanisms straight from config, without this, the transport specific thread would cause a segmentation fault when trying to access the pack/unpack function pointers.
Add 2 functions to access the P5 and P7 VNF structures, to avoid having to always cast user_data and p7_vnfs
These libraries depend on the logging module, so add the right
dependency log_headers. Indirectly, this will fulfill the condition of
T. I consider the prior usage of generate_T or {T_LIB} incorrect,
because basically none of these libraries actually, actively use T, but
rather only the logging module, which pulls in T. The dependency of
log_headers will also take care of generating and including T headers,
which is a dependency of the logging module.
For conf2uedata and related, fulfill the dependency
through conf2uedata_lib (on which the rest depends).
Created a function nr_error_ind_cb for the VNF that takes a received ERROR.indication and shows some details regarding the reported error from the PNF, since up until now it was not handled and treated as an unknown message.
Proper error handling procedure not created, only shows that the error occurred.
Remove duplicated functions in fapi_vnf_p7.c, leaving only functions for messages that require usage of the secondaty data_buf for unpacking
Move vnf_info struct declaration to nfapi_vnf.h to be available in fapi_nvIPC.c
Add check to vnf_nr_handle_param_response for when phy_info is not found
The WLS VNF is in charge of Enqueueing the used blocks after usage for transport, this is done by keeping track of all blocks used, and calling WLS_Enqueue for all of them upon receiving a SLOT.indication
The common library exposes functions for the PNF to return the received blocks to the VNF for it to call WLS_Enqueue on them.
This is done in order to ensure the Blocks are returned after processing, also preventing the Dequeueing of blocks that are still being used, i.e. the internal value is not -1
All saved blocks are to be enqueued at the reception of a SLOT.indication by the VNF
Additionally, the definition of NFAPI_MAX_PACKED_MESSAGE_SIZE was moved to nfapi_interface.h and removed from the other headers, this is done to allow to set the maximum message size when using WLS by only changing the value in one place
Fixup fapi_nr_message_header_unpack call in nfapi_hex_parser
