Integrate channel pipeline library with vrtsim with two acceleration
options chosen at compile time:
- threadpool if CUDA support is disabled
- CUDA otherwise
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Remove the \file directive, as it is always superfluous because the
current file is implicit [1]:
> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.
Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.
Eurecom code has been contributed and was under OAI PL v1.0/v1.1.
For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.
[1] https://www.doxygen.nl/manual/commands.html#cmdfile
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing
pattern 3 configuration.
This MR adds support for handling a non-zero start symbol for SIB1 when using
multiplexing pattern 3 with the per-slot CP format.
Previously, the implementation assumed that the first downlink symbol used by
a PDU always starts at symbol 0. However, this assumption does not hold for
SIB1 under multiplexing pattern 3, where the start symbol can be non-zero.
This issue does not apply to the per-symbol CP format.
Testing:
a. Microamp using the branch microamp_1048: UE registration ok. end-to-end ok.
b. Benetel: UE registration ok. end-to-end ok.
xran needs to be informed about the cores to use for packet processing.
Prior to this change, we only filled the first 64bits, but it can go up
to 128 in xran. Change the helper accordingly to support all.
Set rxgain to 0 in vrtsim
Set rxgain to 0 in vrtsim to match rfsimulator behavior
This addresses the issue where RSRP is different between rfsim and vrtsim. With
this RSRP values between rfsim and vrtsim should be similar.
[FHI72] Fix long PRACH format
The problem was that xran_is_prach_slot() compared if the current slot is the
scheduled one. However, this becomes irrelevant if long PRACH format used.
Successfully tested end-to-end the PRACH index 7 with TDD DDDDDDDSUU and Benetel
v2.0.5.
vrtsim doc: clarify container requirements
Describe how to set up vrtsim in containers, e.g., docker, and link to an
example. Add a minor clarification for the connection descriptor as well.
1. Remove modifications done in the following xran functions:
process_mbuf_batch();
xran_process_srs_sym().
=> not even used with OAI 7.2 interface.
2. Also, remove xran_fs_get_num_dl_sym_sp() and xran_fs_get_num_ul_sym_sp() introduced in the same MR.
3. Remove LiteOnIgnoreUPSectionIdEnable parameter. Instead, use RunSlotPrbMapBySymbolEnable in a simple way
for xran_process_rx_sym() function.
Explanation: The xran expects UL UP packets with the same section IDs as indicated per UL CP message.
However, the section IDs of received packets are 3 for mixed slot and 13 for UL slot.
If the PRACH offset is set explicitely via config file, then its value will be used.
Otherwise, eAxC_offset = max(Nrx,Ntx).
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Only static long PRACH configuration verified, i.e. PRACH C-plane
is ignored by the RU.
Note: Introducing `N_ZC` and `num_prbu` parameters is needed for testing
with xran F release. However, in the K release, this information is
stored in xran_rx_packet_ctl struct.
Move PRACH slot checking from oaioran.c to oran_isolate.c because
xran_is_prach_slot() compared the current slot instead of the scheduled.
The current and the scheduled slot are the same in case of short format,
but different in case of format 0. Therefore, with this commit, in xran_is_prach_slot()
we check the `prach_id->slot` and not `slot`.
Use flat buffer for txdataF in gNB L1
This MR changes txdataF buffer format to hold freq domain data starting from
PRB0 instead of circular buffer that starts from PRB N/2. The motive is to
simplify RE mapping function in L1 and copying data to xran lib.
- Add num_ues and ue_id parameters for server and client configuration
- Implement ul combining and dl distribution to all ues
- Each ue uses dedicated antenna offsets based on ue_id
- Works with no-chanmod mode only and with uniform antenna dimensions across all ues
The original error was simply "failed to write to RF", which is not very
precise. Update with sample numbers for context, and add it in another
similar case for consistency.
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
At least writerProcessWaitingQueue() checks for the exact number of
samples written. In many other places, we check that the return is
non-zero.
The usrp-tx-write-thread functionality returned 0, which triggers
various problems. Return the number of samples, as in the "direct write"
case (if-block before else-block).
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
So far txdataF buffer has DC RE as the first element. This was prefered
most likely to avoid memcpy before iFFT but comes with a small
complexity in RE mapping functions.
Instead, we use a flat buffer that holds freq domain data starting from
first negative SC. After resource mapping is done on all channels, each
OFDM symbol is shifted before iFFT so that the buffer start with DC RE.
This reduces complexity in mapping functions and later on when passing
beam IDs to 7.2 split RU especially when a beam is associated to
interleaved RB and/or REs.
There is already a memcpy in place to copy txdataF from gNB stuct to RU
struct. So this change does not introduce new memcpy.
Remove L1 dependence from NR band number
L1 band information relied on get_band function that couldn't provide an
unambiguous result. Also there is no SCF compliant parameter for L1 and
generally we don't really need that information in L1.
The MR also remove a RU section that used nr_band but was never really
accessed in NR.
Prior to this commit, constants NB_ANTENNAS_RX/TX are provided on the
command line to each compiler invocation. This has the drawback (1) that
also files that don't need that get the constants, and (2) it is not
easy to find them using ctags or similar, as the only definition is in
CMakeLists.txt (where it is not found).
In this commit, use cmake configure_file() to write a header file with
these constants. The file will be generated during cmake invocation, and
written to <build-dir>/common/cmake_defs.h. The relevant files that
need this definition will pick it from the header.
This has been used previously also in a commit to write git information.
See-also: 8bffd1666d ("Avoid complete rebuild on cmake run with git info change")
All the use cases we tested so far, are supported with xran F release.
Therefore, we can proceed with removing the support with E release.
In addition, our plan is to bring the support for K release which is ongoing activity in
the MR https://gitlab.eurecom.fr/oai/openairinterface5g/-/merge_requests/3444.
Cleanup Cmake: remove some double compilation
Harmonize some cmake code to avoid double compilation, notably around
polar and smallblock. In develop, we just add their sources to other
targets, whereas now we define STATIC libraries (further changed to
shared library in !3856) to avoid double compilation.
With this command line:
cmake .. -GNinja -DENABLE_TESTS=ON && ninja
shows that before we compile 12631 files, where after it is 12583
there is additional supporting cleanup (move code, remove headers,
types, ...).
there is more harmonization to do, I limited myself to some easy wins.
For instance, we do the same with PDCP/SDAP, and this should be
refactored into STATIC libraries as well.
Remove VCD signal dumper from NR code
We don't test VCD in 5G NR code (and haven't tested it in 4G for years).
Remove the VCD traces in 5G code to avoid any ambiguity. 4G code remains
in place, as well as the tools to analyze existing traces.
