- Phy config update and Sidelink frame parameters initialisation
- PSBCH scheduler to trigger TX PSBCH/RX PSBCH actions
- Sidelink indication with rx ind to trigger send SL-MIB to MAC
- Enable Scope for PSBCH use -d or --dqt
- Enable system testing of PSBCH for example using RFSIMULATOR:
- UE1 is a SYNCRONISATION SOURCE UE which transmits PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --sync-ref 4 --rfsim --rfsimulator.serveraddr server
- UE2 syncs onto UE1 during sidelink search, gets the timing and continues to receive PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --rfsim --rfsimulator.serveraddr 127.0.0.1
- In the default use case 2 Sidelink SSBs sent over 16 frames.
- In case SL-SSB configuration needs to be changed use -O option in the above command like
-O ../../../targets/PROJECTS/NR-SIDELINK/CONF/sidelink_preconfig_1txpool.conf
make sure the SSB is offset by 4 PRBs from the BW start.
Therefore, the ARFCN for the SSB center must be offset by 14 PRB from the ARFCN for the BW start.
In a previous commit, the functionality of handling IPv6 (and DNS names)
as part of the IPv4 was introduced (in IPv4 field for backwards
compatibility). This commit now removes superfluous configuration
fields:
- IPv6: handled by IPv4 field
- active: users can just remove an entry
- preference: not needed
- Update the configuration for benetel 650 and 550 for new firmware version
- Remove the old firmware configuration file and description in the document
- Add a new RU configuration section
- Add How to get support from the OAI Community to clarify the support procedure.
The original UL max MCS of 9 was chosen for performance reasons. In the
meantime, machines became faster, and the ULSCH decoding faster. Improve
UL max MCS to be 28 by default to use the complete range of possible
MCS.
Doing only 5 LDPC iterations by default leads to a poor reception
performance, and correspondingly many retransmissions. Increase to 8 as
the new default to improve user experience.
system_core is the core reserved for DPDK control threads. It was
hardcoded to 0, but it seems that one some systems, CPU 0 cannot be
reasonably isolated from kernel threads. Make it therefore configurable
(default: 0)
Closes: #732 (suggestion 1)
Suggested-by: Andrew Sergeev <andrew.sergeev@adtran.com>
- Add the O-RAN 7.2 FHI library, interfacing with OSC xRAN library (E
release)
- Add Findxran.cmake to detect the library and headers, including
version information
- Test for numa and DPDK presence
- Add patch for OSC xRAN to make interworking possible
- Add sample config files for LiteOn, Benetel, and VVDN units.
Documentation is provided in the next commit.
Co-authored-by: Raymond Knopp <raymond.knopp@eurecom.fr>
Co-authored-by: Cedric Roux <cedric.roux@eurecom.fr>
Co-authored-by: Manish Kumar Singh <manish1.kumar@amd.com>
Co-authored-by: thamizhselvan.k <thamizhselvan.k@vvdntech.in>
Co-authored-by: rajeshwari.p <rajeshwari.p@vvdntech.in>
Co-authored-by: Hongzhi Wang <hongzhi.wang@openairinterface.org>
Co-authored-by: Sofia Pison <Sofia.Pison@eurecom.fr>
remove several unused files
remove mem_block_t that is never used in a different way than a simple heap buffer
move up IP address type and remove duplications of the same struct declaration
3GPP has the concept of a gNB-DU ID and a (separate) gNB ID (for gNB,
CU). This commit introduces the gNB-DU as a separate ID that has to be
set in the configuration file. It is necessary, as some entities, e.g.,
the e2 agent, need to signal both IDs, e.g., to reconcile a CU and
(multiple) DU(s) belonging together.
