TRS resources if configured by gnb, is present in two consequtive slots
and two symbols per slot. LS estimates from the first symbol is saved
and in second symbol frequency offset and time offset is estimated. The
estimated FO is saved in UE global structure which is used in the last
TRS slot. If the FO is above a threshold, the radio's center frequency
is adjusted.
Time offset is estimated but not used because time is already tracked
using PBCH DMRS.
Signed-off-by: Sakthivel Velumani <s.velumani@northeastern.edu>
even if 2 codewords are currently not supported and not tested, the way UE handled the possibility of having 2 codewords was messy, in between support and non-support
the intention of this MR is to cleanup the code more than extend the support
Signed-off-by: Francesco Mani <email@francescomani.it>
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Fix for NTN phy-test mode
- Corrected the initialisation of ntn params changed flag. Before this change on
UE, Phy-test was not running in NTN mode.
- Removed the assert wrt slot > 64 to run FR2-NTN in phy-test
- SIB2, 19 required only in SA mode like SIB1
- Introduced new method to schedule a slot in UL/DL in Phy-test mode. Dmod/ Umod
option in the command line with a value.
- This ensures that the slot n (in slots per frame) will be scheduled if
n % value == 0
- For ex: --Dmod 1 means every slot will be scheduled
- --Dmod 2 means every 2nd slot will be scheduled, like 0,2,4,6 until the
slots per frame 1.
- this can be used for testing FDD FR2 where slots go beyond 64 which is a
limitation of -D/-U option.
params_changed flag is set to true when reconfig.raw file gets processed,
as NTN config is present in reconfiguration.
but due to this initialisation happening at a later point
params_changed is reset which results in incorrect writes on RFsimulator
Remove unused function arguments
Some of them, because there are hundreds if not thousands. Warnings at compilation time can be enabled using -Wunused-parameter.
UE: Fix if target cell during handover has SSB at a different offset as in source cell
These changes fixed these observed issues:
- If target cell has a different SSB position compared to source cell during
ho - sync was not successful.
- RAR does not get decoded if SSB position has changed on the target cell
compared to source cell.
Actual problem is that SYNC does not happen on the target cell as frame parameters is not updated
and ssb start carrier is not correct in the UE frame parameters
function nr_get_ssb_start_sc to determine ssb_start_subcarrier
Remove L1 dependence from NR band number
L1 band information relied on get_band function that couldn't provide an
unambiguous result. Also there is no SCF compliant parameter for L1 and
generally we don't really need that information in L1.
The MR also remove a RU section that used nr_band but was never really
accessed in NR.
When writing dummy data or reading to trash, we don't need to allocate data buffers for each antenna.
We can allocate just for one antenna and use this buffer for each antenna.
These logs are very helpful to identify cell configuration
changes in MAC/PHY, for monitoring purposes, and to rapidly
signal integrity failures during re-establishment.
Make sure to apply Doppler and TA not directly when receiving the target cell ntn_config,
but apply Doppler just before the initial sync, and the TA after the initial sync when
we have tha actuel cell frame and slot numbers.
We need the ntn_config when reconfiguring the PHY layer for a new initial sync,
e.g. for calculating the DL Doppler frequency.
As a dedicated scheduled_response dl_config PDU it reaches the PHY layer too late,
as part of the phy_config.config_req it reaches the PHY layer in time with the
other configuration values.
Add symbol timing functions for NR_DL_FRAME_PARMS + optimization for slot timing
counterparts
Add two new functions for calculation symbol timestamp and symbol duration for
NR_DL_FRAME_PARMS. Also includes an optimization focused on removing
inefficiencies related slot-related counterparts.
1. Removed function pointers for functions get_samples_per_slot(),
get_samples_slot_timestamp() and get_slot_from_timestamp() as it does
not offer any advantage. The functions are now called directly from
everywhere.
2. Optimized these functions by removing loops where ever possible.
Separate timing_advance (N_TA) from timing_advance_ntn (N_common_TA_adj + N_UE_TA_adj)
to keep N_TA when updating N_common_TA_adj + N_UE_TA_adj.
Fixes#981
Instead of trying to estimate N_UE_TA_adj with a second degree polynomial,
we introduce orbit propagation to calculate N_UE_TA_adj with higher accuracy.
When we receive the satellite ephemeris data consisting of the satellite position vector
and the satellite velocity vector, we calculate parameters for orbit propagation, assuming
a circular orbit in the plane created by the satellite position vector and the satellite
velocity vector. This is done in the function prepare_ue_sat_ta().
Every millisecond, we use these parameters together with the time since epoch to calculate
the satellite position on that orbit and from this the reound-trip-time between UE and the
satellite, what corresponds to N_UE_TA_adj. This is done in the function apply_ntn_timing_advance().
- Replaced ITTI message queues with notifiedFIFO for RRC to MAC communication in UE.
- Enables correct message delivery to multiple MAC instances running in parallel threads.
- Introduced `nr_mac_rrc_message_t` union for MAC-RRC messages.
- Updated all relevant message handling and initialization code to use notifiedFIFO.
- Use MAX_NUM_NR_UE_INST in NR UE MAC to control number of MAC instances.
- Modify the MAC interface slightly so that nr_l2_init_ue only initializes one instance
