Duranta is a Linux Foundation networking project and does not have
permission to display the trademarked OAI logo
(https://openairinterface.org/logo/), which belongs to the
OpenAirInterface Software Alliance (legal entity "OPENAIRINTERFACE").
Remove logo to avoid any legal problems.
Remove some superfluous text with HTML code in some documentation.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
- make internal links relative where applicable
- delete link to the wiki, as the documentation is in the main repo, not
the wiki
- remove some "example in oai code" as the examples either don't exist,
or are not in that place, and we can reasonably expect people to grep
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Use taskset with a dynamic range based on the number of detected processors
for OAI and DPDK build. This ensures both DPDK and OAI build steps use all
available CPU cores on the machine.
Build with XRAN K release
Signed-off-by: Jaroslava Fiedlerova <jaroslava.fiedlerova@openairinterface.org>
The existing patch (generated through sed) works also in UHD versions
beyond 4.8, so allow to use that.
Further, since sed is confusing, store the patch directly. Update the
dockerfiles so that docker copies the right file for UHD 4.8.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
- Build and install libyang (v2.1.111) and libnetconf2 (v2.1.37) from source.
- Build ran-build-fhi72 image with M-plane enabled
- Copy YANG models required for M-plane operation into the container.
- Update gNB Dockerfile to work without M-plane
Signed-off-by: Jaroslava Fiedlerova <jaroslava.fiedlerova@openairinterface.org>
ZMQ radio
This is a zmq radio implementation that attempts to integrate NR UE with
the ocudu project.
OAI integration status:
This can currently be used to connect OAI gnb and OAI UE.
Compilation:
cmake --build . --target nr-softmodem nr-uesoftmodem ldpc params_libconfig zmq_radio
Running
- gNB command:
sudo ./nr-softmodem -O ../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --device.name zmq_radio --zmq.[0].tx_channels tcp://127.0.0.1:4556 --zmq.[0].rx_channels tcp://127.0.0.1:4557
- UE command:
sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --ssb 516 --device.name zmq_radio --zmq.[0].tx_channels tcp://127.0.0.1:4557 --zmq.[0].rx_channels tcp://127.0.0.1:4556
A new CI testcase for 2x2 configuration was added.
OCUDU integration status:
The OAI NR UE enters RRC Connected state.
For more details, please refer to the description of MR !3975.
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Meson configuration was configuring a wrong maximum number of lcores on
the Arm platforms we are using (Neoverse V2 & NVIDIA Grace) as no
configuration is provided for these platforms with DPDK 20.11.9.
This commit solves this issue by requesting meson to use a generic
config that sets a high maximum number of lcores.
This extends the functionality provided by record in that it allows
collection of data into a Clickhouse database, allowing aggregation of
data from gNB and UE for functions like channel estimation for PUSCH
transmissions that did not decode successfully at the gNB.
It is intended to be used in conjunction with Aerial Data Lake but is
not limited to it. Data access is simpler than in !3462, but could be
improved using the metadata approach from !3462.
The integration uses logfmt for fast logging, and a clickhouse DB
client, both integrated using CPM.
This change set also adds a docker-compose file for a UE on 100MHz, to
be used with Aerial configurations, and builds the tracer for Aerial and
nrUE docker files.
This reverts commit 16c333b1a3.
I tried to build everything in Ubuntu images, but
- this introduced a regression (ignores $BUILD_OPTION)
- made that we don't use -Werror (when we should)
I tried to fix the use of the first, but it would involve more changes
than I prefer. On the second, we cannot enable -Werror, as FlexRIC does
not build warning-free (in Release mode). We thus have to build only the
targets that we require, and therefore we can keep using build_oai,
which is the simplest option (cf. the first point).
Compile all targets in Ubuntu build to avoid breakage of software.
Remove ldd in build dockerfile, as we don't need that (can also be
inspected manually).
Update RHEL UBI image source to registry.redhat.io
This merge request updates the RHEL UBI base image source to registry.redhat.io,
aligning with Red Hat’s supported container registry and avoiding potential
access or availability issues with registry.access.redhat.com.
Add Ethernet PDU session support and make PDU session request configurable
This MR adds support for Ethernet PDU sessions, and makes PDU sessions
configurable: per-PDU session ID, type (IPv4/IPv4v6/IPv6/Ethernet [1]),
DNN, NSSAI.
Concretely, it adds a new configuration file section pdu_sessions below
uicc0 that looks like this if everything is specified (default values
are shown):
uicc0:
[...]
pdu_sessions:
- id: 1
type: "IPv4"
nssai_sst: 1
nssai_sd: 0xffffff
dnn: "oai"
It is possible to list multiple PDU sessions (add new line - id: 2 to
request a second PDU session). It is backwards-compatible to the current
PDU session configuration (uicc0.dnn/nssai_sst/etc), the idea being that
either legacy or new configuration could be used, but (1) if
pdu_sessions exist, it will overwrite the legacy configuration, and (2)
multiple PDU sessions, and type, can only be configured using the new
config. The old parameters --extra-pdu-id and --default-pdu-id are not
accepted anymore. Documentation has been added to the UE tutorial.
It is possible to test an Ethernet PDU session [1]. It is possible to
test the PDU session inside the UE by verifying it has an TAP interface
oaitap_ue1, and ARPing the data network (arping has been added to
oai-nr-ue container for that purpose):
ip addr add 192.168.72.140/26 dev oaitap_ue1 # same subnet as data network!
ip link set dev oaitap_ue1 up
arping -c 20 -I oaitap_ue1 192.168.72.135 # will send ARP request in Ethernet frame to get IP address of data network
[1] See description MR !3769 for more information. On the UE side, only
the type has to be changed to "Ethernet".
The CN team would like to test the ethernet PDU session capabilities of
the UPF. Install arping in the UE by default for ubuntu to help them
test the PDU session by pinging over ARP.
CI: Enable Physim threshold check for tests on Caracal and GH
This MR adds support for configurable timing threshold files in PhySim
tests.
- Introduces a new CMake cache variable PHYSIM_CHECK_FILES to specify
one or more timing threshold files (semicolon-separated).
- Enables optional enforcement of timing thresholds check in PhySim
tests without changing existing test definitions.
- Defines timing thresholds for LDPC encoding/decoding in nr_ulsim,
nr_dlsim and ldpctest on Caracal and GH machines.
Add missing timinig analysis scripts to RHEL9 physim docker image. These files
are now copied from the build stage to /oai-ran/openair1/SIMULATION/tests/,
where they are expected by ctest.
Resolves following issue when running ctest in docker container:
CMake Error: Error processing file: /oai-ran/openair1/SIMULATION/tests/RunTimedTest.cmake
Most (but not all) physical simulators are defined under
openair1/SIMULATION/. Defining physical simulators below there seems to
be the more "obvious" directory anyway, as the physical simulators are
openair1/SIMULATION/tests
Phy(L1) Sim tests => PhySim (tests)
Redirect to files and manual analysis as done in this Dockerfile is not
necessary since we just output all relevant build files to stdout.
Simplify to do the same here.
See: 35361db76b ("build_oai: don't redirect compilations to a file")
Improve MAC docs for MCS and docker for BuildKit usage
See commits for details. The first one is for fixing an omission in
!3281, the second to clarify docker build usage.
Closes: #973
The Dockerfiles are reused for building on different architectures
(amd64/arm64). They differ, though, on some steps for downloading or
installing platform-specific utilities.
This is handled automatically when using BuildKit, which is the default
in docker versions v23.0+. Older docker versions require some special
settings. Explain this in the README.
Closes: #973
As DEBIAN_FRONTEND has been set as environment variable, there is no need to use DEBIAN_FRONTEND=noninteractive inside RUN lines, it is redundant, hence it has been removed.
Libboost went from 1.74.0 to 1.83.0 alongside Ubuntu update.
GCC version is set as default to be more practical.
In Ubuntu22, apt sources were in .list files, in Ubuntu24 they are in .sources files.
Add --break-system-packages for pip installation to use same logic as before, see the pip update 23.0.1 (2023-02-17).
With Ubuntu24 liboai_device requires libpython3.12
