dlsim execution

Conflicts:
	openair1/PHY/LTE_TRANSPORT/pmch.c
	openair1/PHY/LTE_TRANSPORT/transport_proto.h
	openair1/PHY/MODULATION/beamforming.c
	openair1/PHY/TOOLS/lte_dfts.c
	openair1/SCHED/phy_procedures_lte_eNb.c
	openair1/SCHED_UE/phy_procedures_lte_ue.c

LICENSE

@@ -1,94 +1,200 @@
-                      OAI PUBLIC LICENSE V1.0
+				The OpenAirInterface Software Alliance (OSA)
+					OAI Public License (Version 1.1)
 
- Copyright (C) 2016 OpenAirInterface Software Alliance, Inc. <http://www.openairinterface.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
+LICENSE TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION OF OPENAIR 5G SOFTWARE.
 
-Definitions.
-“License” shall mean the terms and conditions for use, reproduction, and distribution set forth in this  document.
+1.	Definitions.
+
+“License” shall mean the terms and conditions for use, reproduction, and distribution set forth 
+in this document.
 
 “Licensor” shall mean the OpenAirInterface Software Alliance.
 
-“Legal Entity” shall mean the union, at the time an acting entity joins the Alliance, of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, “control” means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
+“Legal Entity” shall mean the union, at the time an acting entity joins the Alliance, of the 
+acting entity and all other entities that control, are controlled by, or are under common control 
+with that entity. For the purposes of this definition, “control” means (i) the power, direct or 
+indirect, to cause the direction or management of such entity, whether by contract or 
+otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) 
+beneficial ownership of such entity.
 
-“You” (or “Your”) shall mean an individual or Legal Entity exercising permissions granted by this License.
+“You” (or “Your”) shall mean an individual or Legal Entity exercising permissions granted by 
+this License.
 
-“Source” form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
+“Source” form shall mean the preferred form for making modifications, including but not 
+limited to software source code, documentation source, and configuration files.
 
-“Object” form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
+“Object” form shall mean any form resulting from mechanical transformation or translation of 
+a Source form, including but not limited to compiled object code, generated documentation, 
+and conversions to other media types.
 
-“OpenAirInterface Software Alliance” shall mean the endowment fund established at the initiative of Eurecom, an educational and research establishment located at Campus Sophia Tech, 450 Route des Chappes, 06410 Biot, France, which statutes were signed on 18 November 2014.
+“OpenAirInterface Software Alliance” shall mean the endowment fund established at the 
+initiative of Eurecom, an educational and research establishment located at Campus Sophia 
+Tech, 450 Route des Chappes, 06410 Biot, France, which statutes were signed on 18 
+November 2014.
 
-“ “Work” shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
+“Work” shall mean the work of authorship, whether in Source or Object form, made available 
+under the License, as indicated by a copyright notice that is included in or attached to the 
+work (an example is provided in the Appendix below).
 
-“Derivative Works” shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
+“Derivative Works” shall mean any work, whether in Source or Object form, that is based on 
+(or derived from) the Work and for which the editorial revisions, annotations, elaborations, or 
+other modifications represent, as a whole, an original work of authorship. For the purposes of 
+this License, Derivative Works shall not include works that remain separable from, or merely 
+link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
 
-“Contribution” shall mean any work of authorship that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, “submitted” means any form of electronic, , or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work “Contributor License Agreement” shall mean the agreement signed by any Contributor setting forth the terms and conditions applicable to its Contribution. “Contributor” shall mean any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
+“Contribution” shall mean any work of authorship that is intentionally submitted to Licensor 
+for inclusion in the Work by the copyright owner or by an individual or Legal Entity 
+authorized to submit on behalf of the copyright owner. For the purposes of this definition, 
+“submitted” means any form of electronic, , or written communication sent to the Licensor or 
+its representatives, including but not limited to communication on electronic mailing lists, 
+source code control systems, and issue tracking systems that are managed by, or on behalf of, 
+the Licensor for the purpose of discussing and improving the Work
 
-Grant of Copyright License.
-Subject to the terms and conditions of this License, Licensor and each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form
+“Contributor License Agreement” shall mean the agreement signed by any Contributor setting 
+forth the terms and conditions applicable to its Contribution. 
 
-3. Grant of Patent License.
+“Contributor” shall mean any individual or Legal Entity on behalf of whom a Contribution 
+has been received by Licensor and subsequently incorporated within the Work.
 
-3.1 Grant of Patent License for non-commercial purposes:
+2.	Grant of Copyright License.
+Subject to the terms and conditions of this License, Licensor and each Contributor hereby 
+grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable 
+copyright license to reproduce, prepare Derivative Works of, publicly display, publicly 
+perform, and distribute the Work and such Derivative Works in Source or Object form
 
-Subject to the terms and conditions of this License, Licensor and each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, import, and otherwise transfer the Work, for non-commercial purposes, where such license applies only to those patent claims licensable by such Contributor or Licensor that are necessarily infringed by the Work and/or their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted.
+3. 	Grant of Patent License.
 
-3.2 Grant of Patent License for commercial purposes:
+3.1 Grant of Patent License for study, testing and research purposes:
+Subject to the terms and conditions of this License, Licensor and each Contributor hereby 
+grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable 
+(except as stated in this section) patent license to make, have made, use, and otherwise 
+transfer (excluding selling) the Work, solely for study, testing and research purposes, where 
+such license applies only to those patent claims licensable by Licensor or such Contributor 
+that are necessarily infringed respectively by the Work and/or the said Contributor 
+Contribution(s) alone or by combination of their Contribution(s) with the Work  to which 
+such Contribution(s) was submitted (“Essential Patents”).
 
-For commercial purposes, and subject to the terms and conditions of this License, You commits to be prepared to negotiate a patent license with each Contributor and/or the Licensor on Fair, Reasonable and Non-Discriminatory (“FRAND”) terms and conditions for the Work or Contribution(s) incorporated within the Work.
-
-Licensor and/or each Contributor, by submitting a Contribution, will identify any patent it owns related to the Work and/or its Contribution.
+3.2 Grant of Patent License for purposes other than study and research:
+For purposes other than study, testing and research, and subject to the terms and conditions of 
+this License, You commit to be prepared to negotiate a non-exclusive, non-transferable, non-
+assignable license of Essential Patents with each Contributor and/or the Licensor on Fair, 
+Reasonable and Non-Discriminatory (“FRAND”) terms and conditions for the use of the 
+Work or Contribution(s) incorporated within the Work.
+Licensor and/or each Contributor, by submitting a Contribution, will identify any of its known 
+Essential Patent it owns related to the Work and/or its Contribution.
 
 3.3 Patent Litigation
+If You institute patent litigation against any entity making use of the Work solely for study, 
+testing and research purposes (including a cross-claim or counterclaim in a lawsuit) alleging 
+that the Work or a Contribution incorporated within the Work constitutes direct or 
+contributory patent infringement, then the patent licenses granted to You under section 3.1 of 
+this License for that Work shall terminate as of the date such litigation is filed.
 
-If You institute patent litigation against any entity making non-commercial use of the Work (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
+4. Sublicensing
+You may grant sublicenses under the licenses granted under sections 2 and 3.1 provided that 
+the sublicense is subject to and inclusive of all the terms of and rights under this License to 
+which the Work is or was distributed by the OpenAirInterface Software Alliance.
 
-4. Redistibution
+5. Redistribution
+Subject to terms and conditions set forth in sections 2 and 3, You may reproduce and 
+distribute copies of the Work or Derivative Works thereof in any medium, with or without 
+modifications, and in Source or Object form, provided that You meet the following 
+conditions:  
 
-Subject to terms and conditions set forth in articles 2 and 3, You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
+1. You must give any other recipients of the Work or Derivative Works a copy of this 
+License; and
 
+2. You must cause any modified files by You to carry prominent notices stating that You 
+changed the files; and
 
+3. You must retain, in the Source form of any Derivative Works that You distribute, all 
+copyright, patent, trademark, and attribution notices from the Source form of the Work, 
+excluding those notices that do not pertain to any part of the Derivative Works; and
 
+4. If the Work includes a “NOTICE” text file as part of its distribution, then any Derivative 
+Works that You distribute must include a readable copy of the attribution notices contained 
+within such NOTICE file, excluding those notices that do not pertain to any part of the 
+Derivative Works, in at least one of the following places: within a NOTICE text file 
+distributed as part of the Derivative Works; within the Source form or documentation, if 
+provided along with the Derivative Works; or, within a display generated by the Derivative 
+Works, if and wherever such third-party notices normally appear. The contents of the 
+NOTICE file are for informational purposes only and do not modify the License. You may 
+add Your own attribution notices within Derivative Works that You distribute, alongside or as 
+an addendum to the NOTICE text from the Work, provided that such additional attribution 
+notices cannot be construed as modifying the License. 
+You may add Your own copyright statement to Your modifications and may provide 
+additional or different license terms and conditions for use, reproduction, or distribution of 
+Your modifications, or for any such Derivative Works as a whole, provided Your use, 
+reproduction, and distribution of the Work otherwise complies with the conditions stated in 
+this License.
 
-1. You must give any other recipients of the Work or Derivative Works a copy of this License; and
+6. Submission of Contributions. 
+Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be 
+under the terms and conditions of this License, without any additional terms or conditions. 
+Notwithstanding the above, nothing herein shall supersede or modify the terms of any 
+separate license agreement such as the Contributor License Agreement You may have 
+executed with Licensor regarding such Contributions.
 
-2. You must cause any modified files by You to carry prominent notices stating that You changed the files; and
+7. Trademarks. 
+This License does not grant permission to use the trade names, trademarks, service marks, or 
+product names of the Licensor, except as required for reasonable and customary use in 
+describing the origin of the Work and reproducing the content of the NOTICE file.
 
-3. You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
+8. Disclaimer of Warranty. 
+Unless required by applicable law or agreed to in writing, Licensor provides the Work (and 
+each Contributor provides its Contributions) on an “AS IS” BASIS, WITHOUT 
+WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, 
+without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, 
+MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely 
+responsible for determining the appropriateness of using or redistributing the Work and 
+assume any risks associated with your exercise of permissions under this License.
 
-4. If the Work includes a “NOTICE” text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
+9. Limitation of Liability. 
+In no event and under no legal theory, whether in tort (including negligence), contract, or 
+otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or 
+agreed to in writing, shall Licensor and any Contributor, as such, be liable to You for 
+damages, including any direct, indirect, special, incidental, or consequential damages of any 
+character arising as a result of this License or out of Your use or inability to use the Work 
+(including but not limited to damages for loss of goodwill, work stoppage, computer failure or 
+malfunction, or any and all other commercial damages or losses), even if such Contributor has 
+been advised of the possibility of such damages.
 
+10. Accepting Warranty or Additional Liability. 
+While redistributing the Work or Derivative Works thereof, You may choose to offer, and 
+charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations 
+and/or rights consistent with this License. However, in accepting such obligations, You may 
+act only on Your own behalf and on Your sole responsibility, not on behalf of any other 
+Contributor and/or the Licensor, and only if You agree to indemnify, defend, and hold each 
+Contributor and/or the Licensor harmless for any liability incurred by, or claims asserted 
+against, such Contributor and/or Licensor by reason of Your accepting any such warranty or 
+additional liability.
 
-You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
-
-5. Submission of Contributions. Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement such as the Contributor License Agreement You may have executed with Licensor regarding such Contributions.
-
-6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
-
-7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with your exercise of permissions under this License.
-
-8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall Licensor and any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
-
-9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor and/or the Licensor,and only if You agree to indemnify, defend, and hold each Contributor and/or the Licensor harmless for any liability incurred by, or claims asserted against, such Contributor and/or Licensor by reason of Your accepting any such warranty or additional liability.
-
-10. Applicable law. The present license shall be governed by the laws of France.
+11. Applicable law. 
+The present license shall be governed by the laws of France.
 
 END OF TERMS AND CONDITIONS
 
-APPENDIX: How to apply the PRESENT OPENAIR 5G License to your work
-To apply the present License to your work, attach the following boilerplate notice, with the fields enclosed by brackets “[]” replaced with your own identifying information. (Don’t include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same “printed page” as the copyright notice for easier identification within third-party archives.
+1.	APPENDIX: How to apply the PRESENT OPENAIR 5G License to your work
+To apply the present License to your work, attach the following boilerplate notice, with the 
+fields enclosed by brackets “[]” replaced with your own identifying information. (Don’t 
+include the brackets!) The text should be enclosed in the appropriate comment syntax for the 
+file format. We also recommend that a file or class name and description of purpose be 
+included on the same “printed page” as the copyright notice for easier identification within 
+third-party archives.
 
 Copyright [yyyy] [name of copyright owner]
-Licensed under the License terms and conditions for use, reproduction, and distribution of OPENAIR 5G software (the “License”);
 
-you may not use this file except in compliance with the License.You may obtain a copy of the License at
-Unless required by applicable law or agreed to in writing, software
+Licensed under the License terms and conditions for use, reproduction, and distribution of 
+OPENAIR 5G software (the “License”);
 
-distributed under the License is distributed on an “AS IS” BASIS,
+you may not use this file except in compliance with the License. You may obtain a copy of 
+the License at
+
+Unless required by applicable law or agreed to in writing, software distributed under the 
+License is distributed on an “AS IS” BASIS,
 
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 
-See the License for the specific language governing permissions and
+See the License for the specific language governing permissions and limitations under the 
+License.
 
-limitations under the License.

README.txt

@@ -43,3 +43,4 @@ v0.5.2 -> Last version with old code for oaisim (abstraction mode works)
 v0.6 -> RRH functionality, UE greatly improved, better TDD support,
         a lot of bugs fixed. WARNING: oaisim in PHY abstraction mode does not
         work, you need to use v0.5.2 for that.
+v0.6.1 -> Mostly bugfixes. This is the last version without NFAPI.

ci-scripts/Jenkinsfile-gitlab

@@ -0,0 +1,569 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Abstraction function to send social media messages:
+// like on Slack or Mattermost
+def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
+    if (params.pipelineUsesSlack != null) {
+        if (params.pipelineUsesSlack) {
+            slackSend channel: pipeChannel, color: pipeColor, message: pipeMessage
+        }
+    }
+}
+
+def doRedHatBuild = false
+
+pipeline {
+    agent {
+        label 'bellatrix'
+    }
+    options {
+        disableConcurrentBuilds()
+        timestamps()
+        gitLabConnection('OAI GitLab')
+        gitlabBuilds(builds: ["Build eNb-USRP", "Build basic-sim", "Build phy-sim", "Build eNb-ethernet", "Build UE-ethernet", "Analysis with cppcheck", "Test phy-sim", "Test basic-sim", "Test-FDD-Band7", "Test-TDD-Band40", "Test-IF4p5-FDD-Band7", "Test-IF4p5-TDD-Band40"])
+        ansiColor('xterm')
+    }
+
+    stages {
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"'
+                    JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
+
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    if (params.RedHatRemoteServer == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.RedHatRemoteCredentials == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.RedHatWorkingPath == null) {
+                        allParametersPresent = false
+                    }
+                    if (allParametersPresent) {
+                        echo "Performing Red Hat Build"
+                        doRedHatBuild = true
+                    } else {
+                        doRedHatBuild = false
+                    }
+                }
+            }
+        }
+        stage ("Verify Guidelines") {
+            steps {
+                echo "Git URL         is ${GIT_URL}"
+                echo "GitLab Act      is ${env.gitlabActionType}"
+                script {
+                    if ("MERGE".equals(env.gitlabActionType)) {
+                        // GitLab-Jenkins plugin integration is lacking to perform the merge by itself
+                        // Doing it manually --> it may have merge conflicts
+                        sh "./ci-scripts/doGitLabMerge.sh --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+                        sh "zip -r -qq localZip.zip ."
+
+                        // Running astyle options on the list of modified files by the merge request
+                        // For the moment, there is no fail criteria. Just a notification of number of files that do not follow
+                        sh "./ci-scripts/checkCodingFormattingRules.sh --src-branch ${env.gitlabSourceBranch} --target-branch ${env.gitlabTargetBranch}"
+                        def res=readFile('./oai_rules_result.txt').trim();
+                        if ("0".equals(res)) {
+                            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): All Changed files in Merge Request follow OAI Formatting Rules"
+                            addGitLabMRComment comment: message
+                        } else {
+                            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Some Changed files in Merge Request DO NOT follow OAI Formatting Rules"
+                            addGitLabMRComment comment: message
+                        }
+                    } else {
+                        echo "Git Branch      is ${GIT_BRANCH}"
+                        echo "Git Commit      is ${GIT_COMMIT}"
+
+                        sh "zip -r -qq localZip.zip ."
+                        // Running astyle options on all C/H files in the repository
+                        // For the moment, there is no fail criteria. Just a notification of number of files that do not follow
+                        sh "./ci-scripts/checkCodingFormattingRules.sh"
+                    }
+                }
+            }
+            post {
+                failure {
+                    script {
+                        def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Merge Conflicts -- Cannot perform CI"
+                        addGitLabMRComment comment: message
+                    }
+                }
+            }
+        }
+
+        stage ("Start VM -- cppcheck") {
+            steps {
+                timeout (time: 5, unit: 'MINUTES') {
+                    sh "./ci-scripts/createVM.sh --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                }
+            }
+        }
+
+        stage ("Start VM -- enb-usrp") {
+            steps {
+                timeout (time: 5, unit: 'MINUTES') {
+                    sh "./ci-scripts/createVM.sh --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                }
+            }
+        }
+
+        stage ("Start VM -- basic-sim") {
+            steps {
+                timeout (time: 5, unit: 'MINUTES') {
+                    sh "./ci-scripts/createVM.sh --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                }
+            }
+        }
+
+        stage ("Start VM -- phy-sim") {
+            steps {
+                timeout (time: 5, unit: 'MINUTES') {
+                    sh "./ci-scripts/createVM.sh --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                }
+            }
+        }
+
+        stage ("Start VM -- enb-ethernet") {
+            steps {
+                timeout (time: 5, unit: 'MINUTES') {
+                    sh "./ci-scripts/createVM.sh --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                }
+            }
+        }
+
+        stage ("Start VM -- ue-ethernet") {
+            steps {
+                timeout (time: 5, unit: 'MINUTES') {
+                    sh "./ci-scripts/createVM.sh --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                }
+            }
+        }
+
+        stage ("Variant Builds") {
+            parallel {
+                stage ("Analysis with cppcheck") {
+                    steps {
+                        gitlabCommitStatus(name: "Analysis with cppcheck") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                            }
+                        }
+                    }
+                }
+                stage ("Build eNb-USRP") {
+                    steps {
+                        gitlabCommitStatus(name: "Build eNb-USRP") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                            }
+                        }
+                    }
+                }
+                stage ("Build basic simulator") {
+                    steps {
+                        gitlabCommitStatus(name: "Build basic-sim") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                            }
+                        }
+                    }
+                }
+                stage ("Build physical simulators") {
+                    steps {
+                        gitlabCommitStatus(name: "Build phy-sim") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                            }
+                        }
+                    }
+                }
+                stage ("Build eNb-ethernet") {
+                    steps {
+                        gitlabCommitStatus(name: "Build eNb-ethernet") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                            }
+                        }
+                    }
+                }
+                stage ("Build UE-ethernet") {
+                    steps {
+                        gitlabCommitStatus(name: "Build UE-ethernet") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                            }
+                        }
+                    }
+                }
+                stage ("Build eNb-USRP on Red Hat") {
+                    when {
+                        expression {doRedHatBuild}
+                    }
+                    steps {
+                        gitlabCommitStatus(name: "Build eNb-USRP-CentOS") {
+                            script {
+                                try {
+                                    withCredentials([
+                                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.RedHatRemoteCredentials}", usernameVariable: 'RH_Username', passwordVariable: 'RH_Password']
+                                    ]) {
+                                        timeout (time: 20, unit: 'MINUTES') {
+                                            sh "./ci-scripts/buildOnRH.sh --workspace $WORKSPACE --job-name ${JOB_NAME} --build-id ${BUILD_ID} --remote-host ${params.RedHatRemoteServer} --remote-path ${params.RedHatWorkingPath} --remote-user-name ${RH_Username} --remote-password ${RH_Password}"
+                                        }
+                                    }
+                                } catch (Exception e) {
+                                    echo "Red Hat build failed not an error now"
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+            post {
+                always {
+                    script {
+                        dir ('archives') {
+                            sh "zip -r -qq vm_build_logs.zip basic_sim enb_usrp phy_sim cppcheck enb_eth ue_eth red_hat"
+                        }
+                        if(fileExists('archives/vm_build_logs.zip')) {
+                            archiveArtifacts artifacts: 'archives/vm_build_logs.zip'
+                        }
+                        if ("MERGE".equals(env.gitlabActionType)) {
+                            sh "./ci-scripts/reportBuildLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+                            sh "./ci-scripts/checkAddedWarnings.sh --src-branch ${env.gitlabSourceBranch} --target-branch ${env.gitlabTargetBranch}"
+                            def res=readFile('./oai_warning_files.txt').trim();
+                            if ("0".equals(res)) {
+                                echo "No issues w/ warnings/errors in this merge request"
+                            } else {
+                                def fileList=readFile('./oai_warning_files_list.txt').trim();
+                                def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Some modified files in Merge Request MAY have INTRODUCED WARNINGS (" + fileList + ")"
+                                addGitLabMRComment comment: message
+                            }
+                        } else {
+                            sh "./ci-scripts/reportBuildLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
+                        }
+                        if(fileExists('build_results.html')) {
+                            sh "sed -i -e 's#Build-ID: ${BUILD_ID}#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' build_results.html"
+                            archiveArtifacts artifacts: 'build_results.html'
+                        }
+                    }
+                }
+            }
+        }
+
+        stage ("Variant Tests") {
+            parallel {
+                stage ("Test physical simulators") {
+                    steps {
+                        gitlabCommitStatus(name: "Test phy-sim") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/runTestOnVM.sh --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                            }
+                        }
+                    }
+                }
+                stage ("Test basic simulator") {
+                    steps {
+                        gitlabCommitStatus(name: "Test basic-sim") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/runTestOnVM.sh --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                            }
+                        }
+                    }
+                }
+                stage ("Test on CI bench #1") {
+                    stages {
+                        stage ("Test FDD - Band 7 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-FDD-Band7") {
+                                                build job: 'eNB-CI-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-FDD-Band7") {
+                                                build job: 'eNB-CI-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
+                                }
+                            }
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-FDD-Band7-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-FDD-Band7-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-FDD-Band7-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-FDD-Band7-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-FDD-Band7-B210.html'
+                                            }
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                        stage ("Test TDD - Band 40 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-TDD-Band40") {
+                                                build job: 'eNB-CI-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-TDD-Band40") {
+                                                build job: 'eNB-CI-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
+                                }
+                            }
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-TDD-Band40-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-TDD-Band40-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-TDD-Band40-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-TDD-Band40-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-TDD-Band40-B210.html'
+                                            }
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                        stage ("Test IF4p5 - FDD - Band 7 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-IF4p5-FDD-Band7") {
+                                                build job: 'eNB-CI-IF4p5-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-IF4p5-FDD-Band7") {
+                                                build job: 'eNB-CI-IF4p5-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
+                                }
+                            }
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-IF4p5-FDD-Band7-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-IF4p5-FDD-Band7-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-IF4p5-FDD-Band7-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-IF4p5-FDD-Band7-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-IF4p5-FDD-Band7-B210.html'
+                                            }
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                        stage ("Test IF4p5 - TDD - Band 40 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-IF4p5-TDD-Band40") {
+                                                build job: 'eNB-CI-IF4p5-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-IF4p5-TDD-Band40") {
+                                                build job: 'eNB-CI-IF4p5-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
+                                }
+                            }
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-IF4p5-TDD-Band40-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-IF4p5-TDD-Band40-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-IF4p5-TDD-Band40-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-IF4p5-TDD-Band40-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-IF4p5-TDD-Band40-B210.html'
+                                            }
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+            post {
+                always {
+                    script {
+                        dir ('archives') {
+                            sh "if [ -d basic_sim/test ] || [ -d phy_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
+                        }
+                        if(fileExists('archives/vm_tests_logs.zip')) {
+                            archiveArtifacts artifacts: 'archives/vm_tests_logs.zip'
+                            if ("MERGE".equals(env.gitlabActionType)) {
+                                sh "./ci-scripts/reportTestLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+                            } else {
+                                sh "./ci-scripts/reportTestLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
+                            }
+                            if(fileExists('test_simulator_results.html')) {
+                                sh "sed -i -e 's#Build-ID: ${BUILD_ID}#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_simulator_results.html"
+                                archiveArtifacts artifacts: 'test_simulator_results.html'
+                            }
+                        }
+                    }
+                }
+            }
+        }
+        stage ("Destroy all Virtual Machines") {
+            steps {
+                sh "./ci-scripts/destroyAllRunningVM.sh --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+            }
+        }
+    }
+    post {
+        always {
+            script {
+                // Stage destroy may not be run if error in previous stage
+                sh "./ci-scripts/destroyAllRunningVM.sh --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                emailext attachmentsPattern: '*results*.html',
+                     body: '''Hi,
+Here are attached HTML report files for $PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!
+
+Regards,
+OAI CI Team''',
+                     replyTo: 'no-reply@openairinterface.org',
+                     subject: '$PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!',
+                     to: env.gitlabUserEmail
+            }
+        }
+        success {
+            script {
+                def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ")"
+                if ("MERGE".equals(env.gitlabActionType)) {
+                    echo "This is a MERGE event"
+                    addGitLabMRComment comment: message
+                    def message2 = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ") -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
+                    sendSocialMediaMessage('ci-enb', 'good', message2)
+                } else {
+                    sendSocialMediaMessage('ci-enb', 'good', message)
+                }
+            }
+        }
+        failure {
+            script {
+                def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ")"
+                if ("MERGE".equals(env.gitlabActionType)) {
+                    echo "This is a MERGE event"
+                    addGitLabMRComment comment: message
+                    def message2 = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ") -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
+                    sendSocialMediaMessage('ci-enb', 'danger', message2)
+                } else {
+                    sendSocialMediaMessage('ci-enb', 'danger', message)
+                }
+            }
+        }
+    }
+}

ci-scripts/Jenkinsfile-tmp-ran

@@ -0,0 +1,487 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the phone resource
+def ciSmartPhoneResource = params.smartphonesResource
+
+// Terminate Status
+def termUE = 0
+def termENB = 1
+def termSPGW = 2
+def termMME = 3
+def termHSS = 4
+def termStatusArray = new Boolean[termHSS + 1]
+termStatusArray[termUE] = false
+termStatusArray[termENB] = false
+termStatusArray[termSPGW] = false
+termStatusArray[termMME] = false
+termStatusArray[termHSS] = false
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess = false
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    options {
+        disableConcurrentBuilds()
+        ansiColor('xterm')
+    }
+    // the following parameter options are commented out so it shows the ones
+    // that you SHALL have to run the job.
+    // You can use them as template
+    /*
+    parameters {
+        //node-test parameters
+        string(name: 'pythonExecutor', defaultValue: 'nodea', description: 'Node where the pipeline - python scripts will be executed')
+        string(name: 'pythonTestXmlFile', defaultValue: 'enb_usrpB210_band7_50PRB.xml', description: 'Location of the Test XML to be run')
+        string(name: 'pipelineTestStageName', defaultValue: 'Test COTS-UE - OAI eNB - LTEBOX EPC', description: 'Naming of the Test Stage')
+        booleanParam(name: 'pipelineZipsConsoleLog', defaultValue: 'True', description: 'If true, the pipeline script retrieves the job console log, zips it and archives it as artifact')
+        string(name: 'smartphonesResource', defaultValue: 'CI-Bench-1-Phones', description: 'Lockeable Resource to prevent multiple jobs to run simultaneously with the same resource')
+
+        //eNB parameters
+        string(name: 'eNB_IPAddress', defaultValue: '192.168.XX.XX', description: 'IP Address of eNB')
+        credentials(name: 'eNB_Credentials', defaultValue: 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', credentialType: "Username with password", required: true, description: 'Credentials for eNB')
+        string(name: 'eNB_SourceCodePath', defaultValue: '/tmp/CI-enb', description: 'Full path of eNB source code')
+
+        //EPC parameters
+        string(name: 'EPC_IPAddress', defaultValue: '192.168.XX.XX', description: 'IP Address of EPC')
+        string(name: 'EPC_Type', defaultValue: 'ltebox', description: 'EPC type: OAI or ltebox')
+        credentials(name: 'EPC_Credentials', defaultValue: 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', credentialType: "Username with password", required: true, description: 'Credentials for EPC')
+        string(name: 'EPC_SourceCodePath', defaultValue: '/tmp/CI-enb', description: 'Full path of EPC source code')
+
+        //ADB server parameters
+        string(name: 'ADB_IPAddress', defaultValue: '192.168.XX.XX', description: 'IP Address of ADB server')
+        credentials(name: 'ADB_Credentials', defaultValue: 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', credentialType: "Username with password", required: true, description: 'Credentials for ADB')
+    }
+    */
+
+    stages {
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    // It is already to late to check it
+                    if (params.pythonExecutor != null) {
+                        echo "eNB CI executor node  :   ${pythonExecutor}"
+                    }
+                    // If not present picking a default XML file
+                    if (params.pythonTestXmlFile == null) {
+                        // picking default
+                        testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                    } else {
+                        echo "Test XML file         :   ${testXMLFile}"
+                    }
+                    // If not present picking a default Stage Name
+                    if (params.pipelineTestStageName == null) {
+                        // picking default
+                        testStageName = 'Template Test Stage'
+                    }
+
+                    if (params.smartphonesResource == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // the following 4 parameters should be pushed by the master trigger
+                    // if not present, take the job GIT variables (used for developing)
+                    if (params.eNB_Repository == null) {
+                        eNB_Repository = env.GIT_URL
+                    } else {
+                        eNB_Repository = params.eNB_Repository
+                    }
+                    echo "eNB_Repository        :   ${eNB_Repository}"
+                    if (params.eNB_Branch == null) {
+                        eNB_Branch = env.GIT_BRANCH
+                    } else {
+                        eNB_Branch = params.eNB_Branch
+                    }
+                    echo "eNB_Branch            :   ${eNB_Branch}"
+                    if (params.eNB_CommitID == null) {
+                        eNB_CommitID = env.GIT_COMMIT
+                    } else {
+                        eNB_CommitID = params.eNB_CommitID
+                    }
+                    echo "eNB_CommitID          :   ${eNB_CommitID}"
+                    if (params.eNB_mergeRequest != null) {
+                        eNB_AllowMergeRequestProcess = params.eNB_mergeRequest
+                    }
+
+                    if (params.EPC_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Type == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (params.ADB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.ADB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (allParametersPresent) {
+                        echo "All parameters are present"
+                    } else {
+                        echo "Some parameters are missing"
+                        sh "./ci-scripts/fail.sh"
+                    }
+                }
+            }
+        }
+        stage ("Build and Test") {
+            steps {
+                script {
+                    dir ('ci-scripts') {
+                      lock (ciSmartPhoneResource) {
+                        try {
+                            echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                            withCredentials([
+                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                            ]) {
+                                sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNB_AllowMerge=${eNB_AllowMergeRequestProcess} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${testXMLFile}"
+                            }
+                        } catch (Exception e) {
+                            currentBuild.result = 'FAILURE'
+                        }
+                      }
+                    }
+                }
+            }
+        }
+        stage ("Terminate") {
+            parallel {
+                stage('Terminate UE') {
+                    steps {
+                        echo '\u2705 \u001B[32mTerminate UE\u001B[0m'
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 ci-scripts/main.py --mode=TerminateUE --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password}"
+                        }
+                    }
+                    post {
+                        success {
+                            script {
+                                termStatusArray[termUE] = true
+                            }
+                        }
+                    }
+                }
+                stage('Terminate eNB') {
+                    steps {
+                        echo '\u2705 \u001B[32mTerminate eNB\u001B[0m'
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        }
+                    }
+                    post {
+                        success {
+                            script {
+                                termStatusArray[termENB] = true
+                            }
+                        }
+                    }
+                }
+                stage('Terminate SPGW') {
+                    steps {
+                        echo '\u2705 \u001B[32mTerminate SPGW\u001B[0m'
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
+                        }
+                    }
+                    post {
+                        success {
+                            script {
+                                termStatusArray[termSPGW] = true
+                            }
+                        }
+                    }
+                }
+                stage('Terminate MME') {
+                    steps {
+                        echo '\u2705 \u001B[32mTerminate MME\u001B[0m'
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
+                        }
+                    }
+                    post {
+                        success {
+                            script {
+                                termStatusArray[termMME] = true
+                            }
+                        }
+                    }
+                }
+                stage('Terminate HSS') {
+                    steps {
+                        echo '\u2705 \u001B[32mTerminate HSS\u001B[0m'
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            sh "python3 ci-scripts/main.py --mode=TerminateHSS --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
+                        }
+                    }
+                    post {
+                        success {
+                            script {
+                                termStatusArray[termHSS] = true
+                            }
+                        }
+                    }
+                }
+            }
+        }
+        stage('Log Collection') {
+            parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (eNB - Run)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
+                            }
+                            if(fileExists("ci-scripts/test_results.html")) {
+                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' test_results-${JOB_NAME}.html"
+                                archiveArtifacts "test_results-${JOB_NAME}.html"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (SPGW)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (SPGW)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (SPGW)\u001B[0m'
+                            sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/spgw.log.zip ./spgw.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("spgw.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "spgw.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (MME)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (MME)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (MME)\u001B[0m'
+                            sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/mme.log.zip ./mme.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("mme.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "mme.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (HSS)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (HSS)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectHSS --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (HSS)\u001B[0m'
+                            sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/hss.log.zip ./hss.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("hss.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "hss.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (Ping)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (Ping)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectPing --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (Ping)\u001B[0m'
+                            sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/ping.log.zip ./ping.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("ping.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "ping.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (Iperf)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (Iperf)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectIperf --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --EPCType=${params.EPC_Type}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (Iperf)\u001B[0m'
+                            sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/scripts/iperf.log.zip ./iperf.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("iperf.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "iperf.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    post {
+        always {
+            script {
+                if (params.pipelineZipsConsoleLog != null) {
+                    if (params.pipelineZipsConsoleLog) {
+                        echo "Archiving Jenkins console log"
+                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
+                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
+                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
+                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
+                        }
+                    }
+                }
+            }
+        }
+        // Making sure that we really shutdown every thing before leaving
+        failure {
+            script {
+                if (!termStatusArray[termUE]) {
+                    withCredentials([
+                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                    ]) {
+                        sh "python3 ci-scripts/main.py --mode=TerminateUE --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password}"
+                    }
+                }
+                if (!termStatusArray[termENB]) {
+                    withCredentials([
+                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                    ]) {
+                        sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                    }
+                }
+                if (!termStatusArray[termSPGW]) {
+                    withCredentials([
+                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                    ]) {
+                        sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
+                    }
+                }
+                if (!termStatusArray[termMME]) {
+                    withCredentials([
+                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                    ]) {
+                        sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
+                    }
+                }
+                if (!termStatusArray[termHSS]) {
+                    withCredentials([
+                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
+                    ]) {
+                        sh "python3 ci-scripts/main.py --mode=TerminateHSS --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
+                    }
+                }
+            }
+        }
+    }
+}

ci-scripts/astyle-options.txt

@@ -0,0 +1,26 @@
+# OAI is using a style that is similar to the Google style
+--style=google
+# long options can be written without the preceding '--'
+# Convert tabs to spaces
+convert-tabs
+# Indentation is 2 spaces
+indent=spaces=2
+# Indent 'switch' blocks so that the 'case X:' statements are indented in the switch block. 
+indent-switches
+# Indent preprocessor blocks at bracket level 0.
+indent-preproc-block
+# Indent multi-line preprocessor #define statements.
+indent-preproc-define
+# Indent C++ comments beginning in column one.
+indent-col1-comments
+# Pad empty lines around header blocks
+break-blocks
+delete-empty-lines
+# Attach a pointer or reference operator (*, &, or ^) to the variable name (right)
+align-pointer=name
+# The code line length is 200 characters/columns (this is the maximum allowed by astyle)
+max-code-length=200
+# If the line contains logical conditionals they will be placed first on the new line.
+break-after-logical
+# Force use of the linux end of line
+lineend=linux

ci-scripts/buildOnRH.sh

@@ -0,0 +1,209 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI RedHat Build Check script"
+    echo "   Original Author: Raphael Defosseux"
+
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo "    buildOnRH.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    echo "    --remote-host #### OR -rh ####"
+    echo "    Specify the RedHat remote server."
+    echo ""
+    echo "    --remote-user-name #### OR -ru ####"
+    echo "    Specify the RedHat remote server username."
+    echo ""
+    echo "    --remote-password #### OR -rp ####"
+    echo "    Specify the RedHat remote server password."
+    echo ""
+    echo "    --remote-path #### OR -ra ####"
+    echo "    Specify the RedHat remote server path to work on."
+    echo ""
+}
+
+if [ $# -lt 1 ] || [ $# -gt 14 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+RH_HOST=XX
+RH_USER=XX
+RH_PASSWD=XX
+RH_PATH=XX
+JOB_NAME=XX
+BUILD_ID=XX
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    shift
+    shift
+    ;;
+    -ws|--workspace)
+    JENKINS_WKSP="$2"
+    shift
+    shift
+    ;;
+    -rh|--remote-host)
+    RH_HOST="$2"
+    shift
+    shift
+    ;;
+    -ru|--remote-user-name)
+    RH_USER="$2"
+    shift
+    shift
+    ;;
+    -rp|--remote-password)
+    RH_PASSWD="$2"
+    shift
+    shift
+    ;;
+    -ra|--remote-path)
+    RH_PATH="$2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+if [ ! -f $JENKINS_WKSP/localZip.zip ]
+then
+    echo "Missing localZip.zip file!"
+    exit 1
+fi
+
+if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ] || [ "$RH_HOST" == "XX" ] || [ "$RH_USER" == "XX" ] || [ "$RH_PASSWD" == "XX" ] || [ "$RH_PATH" == "XX" ]
+then
+    echo "Missing options"
+    usage
+    exit 1
+fi
+
+echo "############################################################"
+echo "Copying GIT repo into RedHat Server" 
+echo "############################################################"
+echo "rm -Rf ${RH_PATH}" >> rh-cmd.txt
+echo "mkdir -p ${RH_PATH}" >> rh-cmd.txt
+
+sshpass -p ${RH_PASSWD} ssh -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST} < rh-cmd.txt
+rm -f rh-cmd.txt
+
+echo "############################################################"
+echo "Running install and build script on RedHat Server"
+echo "############################################################"
+sshpass -p ${RH_PASSWD} scp -o 'StrictHostKeyChecking no' $JENKINS_WKSP/localZip.zip ${RH_USER}@${RH_HOST}:${RH_PATH}
+
+echo "cd ${RH_PATH}" > rh-cmd.txt
+echo "unzip -qq localZip.zip" >> rh-cmd.txt
+echo "source oaienv" >> rh-cmd.txt
+echo "cd cmake_targets" >> rh-cmd.txt
+echo "mkdir -p log" >> rh-cmd.txt
+echo "./build_oai -I -w USRP --eNB > log/install-build.txt 2>&1" >> rh-cmd.txt
+sshpass -p ${RH_PASSWD} ssh -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST} < rh-cmd.txt
+
+rm -f rh-cmd.txt
+
+echo "############################################################"
+echo "Creating a tmp folder to store results and artifacts"
+echo "############################################################"
+if [ ! -d $JENKINS_WKSP/archives ]
+then
+    mkdir -p $JENKINS_WKSP/archives
+fi
+
+ARCHIVES_LOC=$JENKINS_WKSP/archives/red_hat
+if [ ! -d $ARCHIVES_LOC ]
+then
+    mkdir -p $ARCHIVES_LOC
+fi
+
+sshpass -p ${RH_PASSWD} scp -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST}:${RH_PATH}/cmake_targets/log/*.txt $ARCHIVES_LOC
+
+echo "############################################################"
+echo "Checking build status" 
+echo "############################################################"
+
+LOG_PATTERN=.Rel14.txt
+NB_PATTERN_FILES=4
+
+LOG_FILES=`ls $ARCHIVES_LOC/*.txt`
+STATUS=0
+NB_FOUND_FILES=0
+
+for FULLFILE in $LOG_FILES
+do
+    if [[ $FULLFILE == *"$LOG_PATTERN"* ]]
+    then
+        filename=$(basename -- "$FULLFILE")
+        PASS_PATTERN=`echo $filename | sed -e "s#$LOG_PATTERN##"`
+        LOCAL_STAT=`egrep -c "Built target $PASS_PATTERN" $FULLFILE`
+        if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
+        NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
+    fi
+done
+
+if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]; then STATUS=-1; fi
+
+if [ $STATUS -eq 0 ]
+then
+    echo "STATUS seems OK"
+else
+    echo "STATUS failed?"
+fi
+exit $STATUS

ci-scripts/buildOnVM.sh

@@ -0,0 +1,399 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI VM Build Check script"
+    echo "   Original Author: Raphael Defosseux"
+    echo "   Requirements:"
+    echo "     -- uvtool uvtool-libvirt apt-cacher"
+    echo "     -- xenial image already synced"
+    echo "   Default:"
+    echo "     -- eNB with USRP"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo "    buildOnVM.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
+    echo "    Specify the variant to build."
+    echo ""
+    echo "    --keep-vm-alive OR -k"
+    echo "    Keep the VM alive after the build."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+function variant_usage {
+    echo "OAI VM Build Check script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
+    echo ""
+}
+
+if [ $# -lt 1 ] || [ $# -gt 9 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+VM_TEMPLATE=ci-
+JOB_NAME=XX
+BUILD_ID=XX
+VM_NAME=ci-enb-usrp
+VM_MEMORY=2048
+VM_CPU=4
+ARCHIVES_LOC=enb_usrp
+LOG_PATTERN=.Rel14.txt
+NB_PATTERN_FILES=4
+BUILD_OPTIONS="--eNB -w USRP"
+KEEP_VM_ALIVE=0
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    shift
+    shift
+    ;;
+    -ws|--workspace)
+    JENKINS_WKSP="$2"
+    shift
+    shift
+    ;;
+    -k|--keep-vm-alive)
+    KEEP_VM_ALIVE=1
+    shift
+    ;;
+    -v1)
+    VM_NAME=ci-enb-usrp
+    ARCHIVES_LOC=enb_usrp
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=4
+    BUILD_OPTIONS="--eNB -w USRP --mu"
+    shift
+    ;;
+    -v2)
+    VM_NAME=ci-basic-sim
+    ARCHIVES_LOC=basic_sim
+    LOG_PATTERN=basic_simulator
+    NB_PATTERN_FILES=2
+    BUILD_OPTIONS="--basic-simulator"
+    VM_MEMORY=8192
+    VM_CPU=4
+    shift
+    ;;
+    -v3)
+    VM_NAME=ci-phy-sim
+    ARCHIVES_LOC=phy_sim
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=3
+    BUILD_OPTIONS="--phy_simulators"
+    shift
+    ;;
+    -v4)
+    VM_NAME=ci-cppcheck
+    VM_MEMORY=4096
+    ARCHIVES_LOC=cppcheck
+    LOG_PATTERN=cppcheck.xml
+    NB_PATTERN_FILES=1
+    BUILD_OPTIONS="--enable=warning --force --xml --xml-version=2"
+    shift
+    ;;
+    -v7)
+    VM_NAME=ci-enb-ethernet
+    ARCHIVES_LOC=enb_eth
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=6
+    BUILD_OPTIONS="--eNB -t ETHERNET --noS1"
+    shift
+    ;;
+    -v8)
+    VM_NAME=ci-ue-ethernet
+    ARCHIVES_LOC=ue_eth
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=6
+    BUILD_OPTIONS="--UE -t ETHERNET --noS1"
+    shift
+    ;;
+    --variant)
+    variant="$2"
+    case $variant in
+        enb-usrp)
+        VM_NAME=ci-enb-usrp
+        ARCHIVES_LOC=enb_usrp
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=4
+        BUILD_OPTIONS="--eNB -w USRP --mu"
+        ;;
+        basic-sim)
+        VM_NAME=ci-basic-sim
+        ARCHIVES_LOC=basic_sim
+        LOG_PATTERN=basic_simulator
+        NB_PATTERN_FILES=2
+        BUILD_OPTIONS="--basic-simulator"
+        VM_MEMORY=8192
+        VM_CPU=4
+        ;;
+        phy-sim)
+        VM_NAME=ci-phy-sim
+        ARCHIVES_LOC=phy_sim
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=3
+        BUILD_OPTIONS="--phy_simulators"
+        ;;
+        cppcheck)
+        VM_NAME=ci-cppcheck
+        VM_MEMORY=4096
+        ARCHIVES_LOC=cppcheck
+        LOG_PATTERN=cppcheck.xml
+        NB_PATTERN_FILES=1
+        BUILD_OPTIONS="--enable=warning --force --xml --xml-version=2"
+        ;;
+        enb-ethernet)
+        VM_NAME=ci-enb-ethernet
+        ARCHIVES_LOC=enb_eth
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=6
+        BUILD_OPTIONS="--eNB -t ETHERNET --noS1"
+        ;;
+        ue-ethernet)
+        VM_NAME=ci-ue-ethernet
+        ARCHIVES_LOC=ue_eth
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=6
+        BUILD_OPTIONS="--UE -t ETHERNET --noS1"
+        ;;
+        *)
+        echo ""
+        echo "Syntax Error: Invalid Variant option -> $variant"
+        echo ""
+        variant_usage
+        exit 1
+    esac
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+if [ ! -f $JENKINS_WKSP/localZip.zip ]
+then
+    echo "Missing localZip.zip file!"
+    exit 1
+fi
+if [ ! -f /etc/apt/apt.conf.d/01proxy ]
+then
+    echo "Missing /etc/apt/apt.conf.d/01proxy file!"
+    echo "Is apt-cacher installed and configured?"
+    exit 1
+fi
+
+if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
+then
+    VM_TEMPLATE=ci-
+else
+    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
+fi
+
+VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
+VM_CMDS=${VM_NAME}_cmds.txt
+ARCHIVES_LOC=${JENKINS_WKSP}/archives/${ARCHIVES_LOC}
+
+echo "VM_NAME             = $VM_NAME"
+echo "VM_CMD_FILE         = $VM_CMDS"
+echo "JENKINS_WKSP        = $JENKINS_WKSP"
+echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
+echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
+
+IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
+
+if [ $IS_VM_ALIVE -eq 0 ]
+then
+    echo "############################################################"
+    echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
+    echo "############################################################"
+    uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
+fi
+
+echo "Waiting for VM to be started"
+uvt-kvm wait $VM_NAME --insecure
+
+VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
+echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
+
+echo "############################################################"
+echo "Copying GIT repo into VM ($VM_NAME)" 
+echo "############################################################"
+scp -o StrictHostKeyChecking=no localZip.zip ubuntu@$VM_IP_ADDR:/home/ubuntu
+scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$VM_IP_ADDR:/home/ubuntu
+
+echo "############################################################"
+echo "Running install and build script on VM ($VM_NAME)"
+echo "############################################################"
+echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS
+echo "touch /home/ubuntu/.hushlogin" >> $VM_CMDS
+if [[ "$VM_NAME" == *"-cppcheck"* ]]
+then
+    echo "echo \"sudo apt-get --yes --quiet install zip cppcheck \"" >> $VM_CMDS
+    echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
+    echo "sudo apt-get --yes install zip cppcheck >> zip-install.txt 2>&1" >> $VM_CMDS
+else
+    echo "echo \"sudo apt-get --yes --quiet install zip subversion libboost-dev \"" >> $VM_CMDS
+    echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
+    echo "sudo apt-get --yes install zip subversion libboost-dev >> zip-install.txt 2>&1" >> $VM_CMDS
+fi
+echo "mkdir tmp" >> $VM_CMDS
+echo "cd tmp" >> $VM_CMDS
+echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $VM_CMDS
+echo "unzip -qq -DD ../localZip.zip" >> $VM_CMDS
+if [[ "$VM_NAME" == *"-cppcheck"* ]]
+then
+    echo "mkdir cmake_targets/log" >> $VM_CMDS
+    echo "cp /home/ubuntu/zip-install.txt cmake_targets/log" >> $VM_CMDS
+    echo "echo \"cppcheck $BUILD_OPTIONS . \"" >> $VM_CMDS
+    echo "cppcheck $BUILD_OPTIONS . 2> cmake_targets/log/cppcheck.xml 1> cmake_targets/log/cppcheck_build.txt" >> $VM_CMDS
+else
+    echo "echo \"source oaienv\"" >> $VM_CMDS
+    echo "source oaienv" >> $VM_CMDS
+    echo "cd cmake_targets/" >> $VM_CMDS
+    echo "mkdir log" >> $VM_CMDS
+    echo "cp /home/ubuntu/zip-install.txt log" >> $VM_CMDS
+    echo "echo \"./build_oai -I $BUILD_OPTIONS \"" >> $VM_CMDS
+    echo "./build_oai -I $BUILD_OPTIONS > log/install-build.txt 2>&1" >> $VM_CMDS
+fi
+ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
+
+echo "############################################################"
+echo "Creating a tmp folder to store results and artifacts"
+echo "############################################################"
+if [ ! -d $JENKINS_WKSP/archives ]
+then
+    mkdir $JENKINS_WKSP/archives
+fi
+
+if [ ! -d $ARCHIVES_LOC ]
+then
+    mkdir $ARCHIVES_LOC
+fi
+
+scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.txt $ARCHIVES_LOC
+if [[ "$VM_NAME" == *"-cppcheck"* ]]
+then
+    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.xml $ARCHIVES_LOC
+fi
+
+if [ $KEEP_VM_ALIVE -eq 0 ]
+then
+    echo "############################################################"
+    echo "Destroying VM"
+    echo "############################################################"
+    uvt-kvm destroy $VM_NAME
+    ssh-keygen -R $VM_IP_ADDR
+fi
+rm -f $VM_CMDS
+
+echo "############################################################"
+echo "Checking build status" 
+echo "############################################################"
+
+LOG_FILES=`ls $ARCHIVES_LOC/*.txt $ARCHIVES_LOC/*.xml`
+STATUS=0
+NB_FOUND_FILES=0
+
+for FULLFILE in $LOG_FILES 
+do
+    if [[ $FULLFILE == *"$LOG_PATTERN"* ]]
+    then
+        filename=$(basename -- "$FULLFILE")
+        if [ "$LOG_PATTERN" == ".Rel14.txt" ]
+        then
+            PASS_PATTERN=`echo $filename | sed -e "s#$LOG_PATTERN##"`
+        fi
+        if [ "$LOG_PATTERN" == "basic_simulator" ]
+        then
+            PASS_PATTERN="lte-"
+        fi
+        if [ "$LOG_PATTERN" == "cppcheck.xml" ]
+        then
+            PASS_PATTERN="results version"
+            LOCAL_STAT=`egrep -c "$PASS_PATTERN" $FULLFILE`
+        else
+            LOCAL_STAT=`egrep -c "Built target $PASS_PATTERN" $FULLFILE`
+        fi
+        if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
+        NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
+    fi
+done
+
+if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]; then STATUS=-1; fi
+
+if [ $STATUS -eq 0 ]
+then
+    echo "STATUS seems OK"
+else
+    echo "STATUS failed?"
+fi
+exit $STATUS

ci-scripts/checkAddedWarnings.sh

@@ -0,0 +1,144 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI Warning Check script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo "    checkAddedWarnings.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+if [ $# -ne 4 ] && [ $# -ne 1 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+checker=0
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -sb|--src-branch)
+    SOURCE_BRANCH="$2"
+    let "checker|=0x1"
+    shift
+    shift
+    ;;
+    -tb|--target-branch)
+    TARGET_BRANCH="$2"
+    let "checker|=0x2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+
+done
+
+
+if [ $checker -ne 3 ]
+then
+    echo "Source Branch is    : $SOURCE_BRANCH"
+    echo "Target Branch is    : $TARGET_BRANCH"
+    echo ""
+    echo "Syntax Error: missing option"
+    echo ""
+    usage
+    exit 1
+fi
+
+# Merge request scenario
+
+MERGE_COMMMIT=`git log -n1 | grep commit | sed -e "s@commit @@"`
+TARGET_INIT_COMMIT=`cat .git/refs/remotes/origin/$TARGET_BRANCH`
+
+echo " ---- Checking the modified files by the merge request ----"
+echo ""
+echo "Source Branch is    : $SOURCE_BRANCH"
+echo "Target Branch is    : $TARGET_BRANCH"
+echo "Merged Commit is    : $MERGE_COMMMIT"
+echo "Target Init   is    : $TARGET_INIT_COMMIT"
+
+# Retrieve the list of modified files since the latest develop commit
+MODIFIED_FILES=`git log $TARGET_INIT_COMMIT..$MERGE_COMMMIT --oneline --name-status | egrep "^M|^A" | sed -e "s@^M\t*@@" -e "s@^A\t*@@" | sort | uniq`
+NB_WARNINGS_FILES=0
+
+# Retrieve list of warnings 
+LIST_WARNING_FILES=`egrep "error:|warning:" archives/*/*.Rel14.txt archives/*/basic_simulator_*txt | egrep -v "jobserver unavailable|Clock skew detected.|flexran.proto" | sed -e "s#^.*/home/ubuntu/tmp/##" -e "s#^.*/tmp/CI-eNB/##" -e "s#common/utils/.*/itti#common/utils/itti#" | awk -F ":" '{print $1}' | sort | uniq`
+
+echo ""
+echo "List of files that have been modified by the Merge Request AND"
+echo "  that have compilation warnings/errors"
+echo "--------------------------------------------------------------------"
+declare -a ARRAYNAME
+
+for FULLFILE in $MODIFIED_FILES
+do
+    filename=$(basename -- "$FULLFILE")
+    EXT="${filename##*.}"
+    if [ $EXT = "c" ] || [ $EXT = "h" ] || [ $EXT = "cpp" ] || [ $EXT = "hpp" ]
+    then
+        for WARNING_FILE in $LIST_WARNING_FILES
+        do
+            if [ $FULLFILE = $WARNING_FILE ]
+            then
+                echo $WARNING_FILE
+                ARRAYNAME[$NB_WARNINGS_FILES]=$WARNING_FILE
+                NB_WARNINGS_FILES=$((NB_WARNINGS_FILES + 1))
+            fi
+        done
+    fi
+done
+
+echo ""
+echo "NB Files impacted by warnings/errors in Merge Request: $NB_WARNINGS_FILES"
+echo $NB_WARNINGS_FILES > oai_warning_files.txt
+echo ${ARRAYNAME[*]} > oai_warning_files_list.txt
+
+exit 0

ci-scripts/checkCodingFormattingRules.sh

@@ -0,0 +1,154 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI Coding / Formatting Guideline Check script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "   Requirement: astyle shall be installed"
+    echo ""
+    echo "   By default (no options) the complete repository will be checked"
+    echo "   In case of merge request, provided source and target branch,"
+    echo "   the script will check only the modified files"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo "    checkCodingFormattingRules.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+if [ $# -ne 4 ] && [ $# -ne 1 ] && [ $# -ne 0 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+if [ $# -eq 0 ]
+then
+    echo " ---- Checking the whole repository ----"
+    echo ""
+    NB_FILES_TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt --recursive *.c *.h | grep -c Formatted `
+    echo "Nb Files that do NOT follow OAI rules: $NB_FILES_TO_FORMAT"
+    echo $NB_FILES_TO_FORMAT > ./oai_rules_result.txt
+    exit 0
+fi
+
+checker=0
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -sb|--src-branch)
+    SOURCE_BRANCH="$2"
+    let "checker|=0x1"
+    shift
+    shift
+    ;;
+    -tb|--target-branch)
+    TARGET_BRANCH="$2"
+    let "checker|=0x2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+
+done
+
+
+if [ $checker -ne 3 ]
+then
+    echo "Source Branch is    : $SOURCE_BRANCH"
+    echo "Target Branch is    : $TARGET_BRANCH"
+    echo ""
+    echo "Syntax Error: missing option"
+    echo ""
+    usage
+    exit 1
+fi
+
+# Merge request scenario
+
+MERGE_COMMMIT=`git log -n1 | grep commit | sed -e "s@commit @@"`
+TARGET_INIT_COMMIT=`cat .git/refs/remotes/origin/$TARGET_BRANCH`
+
+echo " ---- Checking the modified files by the merge request ----"
+echo ""
+echo "Source Branch is    : $SOURCE_BRANCH"
+echo "Target Branch is    : $TARGET_BRANCH"
+echo "Merged Commit is    : $MERGE_COMMMIT"
+echo "Target Init   is    : $TARGET_INIT_COMMIT"
+echo ""
+echo " ----------------------------------------------------------"
+echo ""
+
+# Retrieve the list of modified files since the latest develop commit
+MODIFIED_FILES=`git log $TARGET_INIT_COMMIT..$MERGE_COMMMIT --oneline --name-status | egrep "^M|^A" | sed -e "s@^M\t*@@" -e "s@^A\t*@@" | sort | uniq`
+NB_TO_FORMAT=0
+if [ -f oai_rules_result_list.txt ]
+then
+    rm -f oai_rules_result_list.txt
+fi
+for FULLFILE in $MODIFIED_FILES
+do
+    filename=$(basename -- "$FULLFILE")
+    EXT="${filename##*.}"
+    if [ $EXT = "c" ] || [ $EXT = "h" ] || [ $EXT = "cpp" ] || [ $EXT = "hpp" ]
+    then
+        TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt $FULLFILE | grep -c Formatted `
+        NB_TO_FORMAT=$((NB_TO_FORMAT + TO_FORMAT))
+        if [ $TO_FORMAT -ne 0 ]
+        then
+            echo $FULLFILE
+            echo $FULLFILE >> ./oai_rules_result_list.txt
+        fi
+    fi
+done
+echo ""
+echo " ----------------------------------------------------------"
+echo "Nb Files that do NOT follow OAI rules: $NB_TO_FORMAT"
+echo $NB_TO_FORMAT > ./oai_rules_result.txt
+
+exit 0

ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -13,22 +13,19 @@ eNBs =
     eNB_name  =  "eNB_Eurecom_LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "94";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
     component_carriers = (
       {
         node_function                                         = "eNodeB_3GPP";
-	node_timing                                           = "synch_to_ext_device";
-	node_synch_ref                                        = 0;
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
         frame_type					      = "TDD";
-        tdd_config 					      = 3;
-        tdd_config_s            			      = 5;
+        tdd_config 					      = 1;
+        tdd_config_s            			      = 0;
         prefix_type             			      = "NORMAL";
         eutra_band              			      = 40;
         downlink_frequency      			      = 2350000000L;
@@ -49,8 +46,8 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 1;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
-        pdsch_referenceSignalPower 			      = -24;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-29;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
         pusch_enable64QAM          			      = "DISABLE";
@@ -63,14 +60,14 @@ eNBs =
         phich_duration                                     = "NORMAL";
         phich_resource                                     = "ONESIXTH";
         srs_enable                                         = "DISABLE";
-        /*  srs_BandwidthConfig                                =;
+      /*  srs_BandwidthConfig                                =;
         srs_SubframeConfig                                 =;
         srs_ackNackST                                      =;
         srs_MaxUpPts                                       =;*/
 
         pusch_p0_Nominal                                   = -96;
         pusch_alpha                                        = "AL1";
-        pucch_p0_Nominal                                   = -103;
+        pucch_p0_Nominal                                   = -106;
         msg3_delta_Preamble                                = 6;
         pucch_deltaF_Format1                               = "deltaF2";
         pucch_deltaF_Format1b                              = "deltaF3";
@@ -80,13 +77,13 @@ eNBs =
 
         rach_numberOfRA_Preambles                          = 64;
         rach_preamblesGroupAConfig                         = "DISABLE";
-        /*
+      /*
         rach_sizeOfRA_PreamblesGroupA                      = ;
         rach_messageSizeGroupA                             = ;
         rach_messagePowerOffsetGroupB                      = ;
-        */
+      */
         rach_powerRampingStep                              = 4;
-        rach_preambleInitialReceivedTargetPower            = -104;
+        rach_preambleInitialReceivedTargetPower            = -108;
         rach_preambleTransMax                              = 10;
         rach_raResponseWindowSize                          = 10;
         rach_macContentionResolutionTimer                  = 48;
@@ -106,6 +103,7 @@ eNBs =
       }
     );
 
+
     srb1_parameters :
     {
         # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
@@ -136,8 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-
-    mme_ip_address      = ( { ipv4       = "127.0.0.3";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -146,17 +143,20 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
 
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.4/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :
     {
-      global_log_level                      ="info";
+      global_log_level                      ="debug";
       global_log_verbosity                  ="medium";
       hw_log_level                          ="info";
       hw_log_verbosity                      ="medium";
@@ -171,5 +171,57 @@ eNBs =
       rrc_log_level                         ="info";
       rrc_log_verbosity                     ="medium";
    };
+
   }
 );
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [38];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 115;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -13,22 +13,19 @@ eNBs =
     eNB_name  =  "eNB_Eurecom_LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "94";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
     component_carriers = (
       {
         node_function                                         = "eNodeB_3GPP";
-	node_timing                                           = "synch_to_ext_device";
-	node_synch_ref                                        = 0;
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
         frame_type					      = "TDD";
         tdd_config 					      = 1;
-        tdd_config_s            			      = 5;
+        tdd_config_s            			      = 0;
         prefix_type             			      = "NORMAL";
         eutra_band              			      = 40;
         downlink_frequency      			      = 2350000000L;
@@ -49,8 +46,8 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 1;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
-        pdsch_referenceSignalPower 			      = -24;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-27;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
         pusch_enable64QAM          			      = "DISABLE";
@@ -63,14 +60,14 @@ eNBs =
         phich_duration                                     = "NORMAL";
         phich_resource                                     = "ONESIXTH";
         srs_enable                                         = "DISABLE";
-        /*  srs_BandwidthConfig                                =;
+      /*  srs_BandwidthConfig                                =;
         srs_SubframeConfig                                 =;
         srs_ackNackST                                      =;
         srs_MaxUpPts                                       =;*/
 
         pusch_p0_Nominal                                   = -96;
         pusch_alpha                                        = "AL1";
-        pucch_p0_Nominal                                   = -103;
+        pucch_p0_Nominal                                   = -106;
         msg3_delta_Preamble                                = 6;
         pucch_deltaF_Format1                               = "deltaF2";
         pucch_deltaF_Format1b                              = "deltaF3";
@@ -80,13 +77,13 @@ eNBs =
 
         rach_numberOfRA_Preambles                          = 64;
         rach_preamblesGroupAConfig                         = "DISABLE";
-        /*
+      /*
         rach_sizeOfRA_PreamblesGroupA                      = ;
         rach_messageSizeGroupA                             = ;
         rach_messagePowerOffsetGroupB                      = ;
-        */
+      */
         rach_powerRampingStep                              = 4;
-        rach_preambleInitialReceivedTargetPower            = -104;
+        rach_preambleInitialReceivedTargetPower            = -108;
         rach_preambleTransMax                              = 10;
         rach_raResponseWindowSize                          = 10;
         rach_macContentionResolutionTimer                  = 48;
@@ -106,6 +103,7 @@ eNBs =
       }
     );
 
+
     srb1_parameters :
     {
         # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
@@ -136,8 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-
-    mme_ip_address      = ( { ipv4       = "127.0.0.3";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -146,17 +143,20 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
 
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.4/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :
     {
-      global_log_level                      ="info";
+      global_log_level                      ="debug";
       global_log_verbosity                  ="medium";
       hw_log_level                          ="info";
       hw_log_verbosity                      ="medium";
@@ -171,5 +171,57 @@ eNBs =
       rrc_log_level                         ="info";
       rrc_log_verbosity                     ="medium";
    };
+
   }
 );
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [38];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 115;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -13,22 +13,19 @@ eNBs =
     eNB_name  =  "eNB_Eurecom_LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "94";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
     component_carriers = (
       {
         node_function                                         = "eNodeB_3GPP";
-	node_timing                                           = "synch_to_ext_device";
-	node_synch_ref                                        = 0;
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
         frame_type					      = "TDD";
-        tdd_config 					      = 3;
-        tdd_config_s            			      = 5;
+        tdd_config 					      = 1;
+        tdd_config_s            			      = 0;
         prefix_type             			      = "NORMAL";
         eutra_band              			      = 40;
         downlink_frequency      			      = 2350000000L;
@@ -49,8 +46,8 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 1;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
-        pdsch_referenceSignalPower 			      = -24;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-27;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
         pusch_enable64QAM          			      = "DISABLE";
@@ -63,14 +60,14 @@ eNBs =
         phich_duration                                     = "NORMAL";
         phich_resource                                     = "ONESIXTH";
         srs_enable                                         = "DISABLE";
-        /*  srs_BandwidthConfig                                =;
+      /*  srs_BandwidthConfig                                =;
         srs_SubframeConfig                                 =;
         srs_ackNackST                                      =;
         srs_MaxUpPts                                       =;*/
 
         pusch_p0_Nominal                                   = -96;
         pusch_alpha                                        = "AL1";
-        pucch_p0_Nominal                                   = -103;
+        pucch_p0_Nominal                                   = -106;
         msg3_delta_Preamble                                = 6;
         pucch_deltaF_Format1                               = "deltaF2";
         pucch_deltaF_Format1b                              = "deltaF3";
@@ -80,13 +77,13 @@ eNBs =
 
         rach_numberOfRA_Preambles                          = 64;
         rach_preamblesGroupAConfig                         = "DISABLE";
-        /*
+      /*
         rach_sizeOfRA_PreamblesGroupA                      = ;
         rach_messageSizeGroupA                             = ;
         rach_messagePowerOffsetGroupB                      = ;
-        */
+      */
         rach_powerRampingStep                              = 4;
-        rach_preambleInitialReceivedTargetPower            = -104;
+        rach_preambleInitialReceivedTargetPower            = -108;
         rach_preambleTransMax                              = 10;
         rach_raResponseWindowSize                          = 10;
         rach_macContentionResolutionTimer                  = 48;
@@ -106,6 +103,7 @@ eNBs =
       }
     );
 
+
     srb1_parameters :
     {
         # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
@@ -136,8 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-
-    mme_ip_address      = ( { ipv4       = "127.0.0.3";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -146,17 +143,20 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
 
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.4/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :
     {
-      global_log_level                      ="info";
+      global_log_level                      ="debug";
       global_log_verbosity                  ="medium";
       hw_log_level                          ="info";
       hw_log_verbosity                      ="medium";
@@ -171,5 +171,57 @@ eNBs =
       rrc_log_level                         ="info";
       rrc_log_verbosity                     ="medium";
    };
+
   }
 );
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [38];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 115;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf

@@ -0,0 +1,264 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2680000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 100;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 2;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -29;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 115;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf

@@ -0,0 +1,264 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2680000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 25;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 2;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -25;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 115;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,47 +10,47 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
-    mobile_country_code =  "208";
+    tr_s_preference     = "local_mac"
 
-    mobile_network_code =  "93";
-
-       ////////// Physical parameters:
+    ////////// Physical parameters:
 
     component_carriers = (
       {
-      node_function     = "NGFI_RRU_IF4p5";
-      node_timing       = "synch_to_ext_device";
-      node_synch_ref    = 0;  
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
       frame_type					      = "FDD";
       tdd_config 					      = 3;
       tdd_config_s            			      = 0;
       prefix_type             			      = "NORMAL";
       eutra_band              			      = 7;
-      downlink_frequency      			      = 2660000000L;
+      downlink_frequency      			      = 2680000000L;
       uplink_frequency_offset 			      = -120000000;
       Nid_cell					      = 0;
       N_RB_DL                 			      = 50;
       Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports =1 ;
+      nb_antenna_ports                                = 1;
       nb_antennas_tx          			      = 1;
       nb_antennas_rx          			      = 1;
       tx_gain                                            = 90;
       rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
       prach_root              			      = 0;
       prach_config_index      			      = 0;
       prach_high_speed        			      = "DISABLE";
       prach_zero_correlation  			      = 1;
       prach_freq_offset       			      = 2;
       pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 1;
+      pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
-      pdsch_referenceSignalPower 			      = -29;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -27;
       pdsch_p_b                  			      = 0;
       pusch_n_SB                 			      = 1;
       pusch_enable64QAM          			      = "DISABLE";
@@ -68,9 +68,9 @@ eNBs =
       srs_ackNackST                                      =;
       srs_MaxUpPts                                       =;*/
 
-      pusch_p0_Nominal                                   = -90;
+      pusch_p0_Nominal                                   = -96;
       pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -96;
+      pucch_p0_Nominal                                   = -104;
       msg3_delta_Preamble                                = 6;
       pucch_deltaF_Format1                               = "deltaF2";
       pucch_deltaF_Format1b                              = "deltaF3";
@@ -101,8 +101,41 @@ eNBs =
       ue_TimersAndConstants_t311			      = 10000;
       ue_TimersAndConstants_n310			      = 20;
       ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
 
-      ue_TransmissionMode                                     = 1;    
       }
     );
 
@@ -138,7 +171,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.155";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,47 +180,85 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.155/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.155/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
-
-    rrh_gw_config = (
-    {			  
-      	local_if_name = "eth0";			  
-      	remote_address = "90:e2:ba:c5:fc:04";
-    	local_address = "00:13:95:1f:a0:af"; 
-    	local_port = 50000;	#for raw option local port must be the same to remote	       
-    	remote_port = 50000; 
-    	rrh_gw_active = "yes";
-    	tr_preference = "raw_if4p5";
-    	rf_preference = "usrp_b200";
-    	iq_txshift = 4;
-    	tx_sample_advance = 80;	
-    	tx_scheduling_advance = 9; 	                
-        if_compression = "alaw";
-    }
-    );  
-
-    log_config :
-    {
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-   };
   }
 );
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 115;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/lte-fdd-basic-sim.conf

@@ -0,0 +1,265 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2680000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 25;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 2;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -27;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 125;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/lte-tdd-basic-sim.conf

@@ -13,22 +13,19 @@ eNBs =
     eNB_name  =  "eNB_Eurecom_LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "94";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
     component_carriers = (
       {
         node_function                                         = "eNodeB_3GPP";
-	node_timing                                           = "synch_to_ext_device";
-	node_synch_ref                                        = 0;
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
         frame_type					      = "TDD";
-        tdd_config 					      = 3;
-        tdd_config_s            			      = 5;
+        tdd_config 					      = 1;
+        tdd_config_s            			      = 0;
         prefix_type             			      = "NORMAL";
         eutra_band              			      = 40;
         downlink_frequency      			      = 2350000000L;
@@ -49,8 +46,8 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 1;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
-        pdsch_referenceSignalPower 			      = -24;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-27;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
         pusch_enable64QAM          			      = "DISABLE";
@@ -63,14 +60,14 @@ eNBs =
         phich_duration                                     = "NORMAL";
         phich_resource                                     = "ONESIXTH";
         srs_enable                                         = "DISABLE";
-        /*  srs_BandwidthConfig                                =;
+      /*  srs_BandwidthConfig                                =;
         srs_SubframeConfig                                 =;
         srs_ackNackST                                      =;
         srs_MaxUpPts                                       =;*/
 
         pusch_p0_Nominal                                   = -96;
         pusch_alpha                                        = "AL1";
-        pucch_p0_Nominal                                   = -103;
+        pucch_p0_Nominal                                   = -106;
         msg3_delta_Preamble                                = 6;
         pucch_deltaF_Format1                               = "deltaF2";
         pucch_deltaF_Format1b                              = "deltaF3";
@@ -80,13 +77,13 @@ eNBs =
 
         rach_numberOfRA_Preambles                          = 64;
         rach_preamblesGroupAConfig                         = "DISABLE";
-        /*
+      /*
         rach_sizeOfRA_PreamblesGroupA                      = ;
         rach_messageSizeGroupA                             = ;
         rach_messagePowerOffsetGroupB                      = ;
-        */
+      */
         rach_powerRampingStep                              = 4;
-        rach_preambleInitialReceivedTargetPower            = -104;
+        rach_preambleInitialReceivedTargetPower            = -108;
         rach_preambleTransMax                              = 10;
         rach_raResponseWindowSize                          = 10;
         rach_macContentionResolutionTimer                  = 48;
@@ -106,6 +103,7 @@ eNBs =
       }
     );
 
+
     srb1_parameters :
     {
         # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
@@ -136,8 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-
-    mme_ip_address      = ( { ipv4       = "127.0.0.3";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -146,17 +143,20 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
 
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.4/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :
     {
-      global_log_level                      ="info";
+      global_log_level                      ="debug";
       global_log_verbosity                  ="medium";
       hw_log_level                          ="info";
       hw_log_verbosity                      ="medium";
@@ -171,5 +171,57 @@ eNBs =
       rrc_log_level                         ="info";
       rrc_log_verbosity                     ="medium";
    };
+
   }
 );
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [38];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 125;
+         eNB_instances  = [0];
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -0,0 +1,234 @@
+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+       ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                                         = "NGFI_RCC_IF4p5";
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
+        frame_type					      = "TDD";
+        tdd_config 					      = 1;
+        tdd_config_s            			      = 0;
+        prefix_type             			      = "NORMAL";
+        eutra_band              			      = 40;
+        downlink_frequency      			      = 2350000000L;
+        uplink_frequency_offset 			      = 0;
+        Nid_cell					      = 0;
+        N_RB_DL                 			      = 100;
+        Nid_cell_mbsfn          			      = 0;
+        nb_antenna_ports          			      = 1;
+        nb_antennas_tx          			      = 1;
+        nb_antennas_rx          			      = 1;
+        tx_gain                                            = 90;
+        rx_gain                                            = 125;
+        prach_root              			      = 0;
+        prach_config_index      			      = 0;
+        prach_high_speed        			      = "DISABLE";
+        prach_zero_correlation  			      = 1;
+        prach_freq_offset       			      = 2;
+        pucch_delta_shift       			      = 1;
+        pucch_nRB_CQI           			      = 1;
+        pucch_nCS_AN            			      = 0;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-29;
+        pdsch_p_b                  			      = 0;
+        pusch_n_SB                 			      = 1;
+        pusch_enable64QAM          			      = "DISABLE";
+        pusch_hoppingMode                                  = "interSubFrame";
+        pusch_hoppingOffset                                = 0;
+        pusch_groupHoppingEnabled  			      = "ENABLE";
+        pusch_groupAssignment      			      = 0;
+        pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+        pusch_nDMRS1                                       = 1;
+        phich_duration                                     = "NORMAL";
+        phich_resource                                     = "ONESIXTH";
+        srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+        srs_SubframeConfig                                 =;
+        srs_ackNackST                                      =;
+        srs_MaxUpPts                                       =;*/
+
+        pusch_p0_Nominal                                   = -96;
+        pusch_alpha                                        = "AL1";
+        pucch_p0_Nominal                                   = -106;
+        msg3_delta_Preamble                                = 6;
+        pucch_deltaF_Format1                               = "deltaF2";
+        pucch_deltaF_Format1b                              = "deltaF3";
+        pucch_deltaF_Format2                               = "deltaF0";
+        pucch_deltaF_Format2a                              = "deltaF0";
+        pucch_deltaF_Format2b		    	      = "deltaF0";
+
+        rach_numberOfRA_Preambles                          = 64;
+        rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+        rach_sizeOfRA_PreamblesGroupA                      = ;
+        rach_messageSizeGroupA                             = ;
+        rach_messagePowerOffsetGroupB                      = ;
+      */
+        rach_powerRampingStep                              = 4;
+        rach_preambleInitialReceivedTargetPower            = -108;
+        rach_preambleTransMax                              = 10;
+        rach_raResponseWindowSize                          = 10;
+        rach_macContentionResolutionTimer                  = 48;
+        rach_maxHARQ_Msg3Tx                                = 4;
+
+        pcch_default_PagingCycle                           = 128;
+        pcch_nB                                            = "oneT";
+        bcch_modificationPeriodCoeff			      = 2;
+        ue_TimersAndConstants_t300			      = 1000;
+        ue_TimersAndConstants_t301			      = 1000;
+        ue_TimersAndConstants_t310			      = 1000;
+        ue_TimersAndConstants_t311			      = 10000;
+        ue_TimersAndConstants_n310			      = 20;
+        ue_TimersAndConstants_n311			      = 1;
+
+	ue_TransmissionMode				      = 1;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+
+    log_config :
+    {
+      global_log_level                      ="debug";
+      global_log_verbosity                  ="medium";
+      hw_log_level                          ="info";
+      hw_log_verbosity                      ="medium";
+      phy_log_level                         ="info";
+      phy_log_verbosity                     ="medium";
+      mac_log_level                         ="info";
+      mac_log_verbosity                     ="high";
+      rlc_log_level                         ="info";
+      rlc_log_verbosity                     ="medium";
+      pdcp_log_level                        ="info";
+      pdcp_log_verbosity                    ="medium";
+      rrc_log_level                         ="info";
+      rrc_log_verbosity                     ="medium";
+   };
+
+  }
+);
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+        local_if_name  = "lo";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "udp_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -0,0 +1,234 @@
+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+       ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                                         = "NGFI_RCC_IF4p5";
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
+        frame_type					      = "TDD";
+        tdd_config 					      = 1;
+        tdd_config_s            			      = 0;
+        prefix_type             			      = "NORMAL";
+        eutra_band              			      = 40;
+        downlink_frequency      			      = 2350000000L;
+        uplink_frequency_offset 			      = 0;
+        Nid_cell					      = 0;
+        N_RB_DL                 			      = 25;
+        Nid_cell_mbsfn          			      = 0;
+        nb_antenna_ports          			      = 1;
+        nb_antennas_tx          			      = 1;
+        nb_antennas_rx          			      = 1;
+        tx_gain                                            = 90;
+        rx_gain                                            = 125;
+        prach_root              			      = 0;
+        prach_config_index      			      = 0;
+        prach_high_speed        			      = "DISABLE";
+        prach_zero_correlation  			      = 1;
+        prach_freq_offset       			      = 2;
+        pucch_delta_shift       			      = 1;
+        pucch_nRB_CQI           			      = 1;
+        pucch_nCS_AN            			      = 0;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-27;
+        pdsch_p_b                  			      = 0;
+        pusch_n_SB                 			      = 1;
+        pusch_enable64QAM          			      = "DISABLE";
+        pusch_hoppingMode                                  = "interSubFrame";
+        pusch_hoppingOffset                                = 0;
+        pusch_groupHoppingEnabled  			      = "ENABLE";
+        pusch_groupAssignment      			      = 0;
+        pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+        pusch_nDMRS1                                       = 1;
+        phich_duration                                     = "NORMAL";
+        phich_resource                                     = "ONESIXTH";
+        srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+        srs_SubframeConfig                                 =;
+        srs_ackNackST                                      =;
+        srs_MaxUpPts                                       =;*/
+
+        pusch_p0_Nominal                                   = -96;
+        pusch_alpha                                        = "AL1";
+        pucch_p0_Nominal                                   = -106;
+        msg3_delta_Preamble                                = 6;
+        pucch_deltaF_Format1                               = "deltaF2";
+        pucch_deltaF_Format1b                              = "deltaF3";
+        pucch_deltaF_Format2                               = "deltaF0";
+        pucch_deltaF_Format2a                              = "deltaF0";
+        pucch_deltaF_Format2b		    	      = "deltaF0";
+
+        rach_numberOfRA_Preambles                          = 64;
+        rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+        rach_sizeOfRA_PreamblesGroupA                      = ;
+        rach_messageSizeGroupA                             = ;
+        rach_messagePowerOffsetGroupB                      = ;
+      */
+        rach_powerRampingStep                              = 4;
+        rach_preambleInitialReceivedTargetPower            = -108;
+        rach_preambleTransMax                              = 10;
+        rach_raResponseWindowSize                          = 10;
+        rach_macContentionResolutionTimer                  = 48;
+        rach_maxHARQ_Msg3Tx                                = 4;
+
+        pcch_default_PagingCycle                           = 128;
+        pcch_nB                                            = "oneT";
+        bcch_modificationPeriodCoeff			      = 2;
+        ue_TimersAndConstants_t300			      = 1000;
+        ue_TimersAndConstants_t301			      = 1000;
+        ue_TimersAndConstants_t310			      = 1000;
+        ue_TimersAndConstants_t311			      = 10000;
+        ue_TimersAndConstants_n310			      = 20;
+        ue_TimersAndConstants_n311			      = 1;
+
+	ue_TransmissionMode				      = 1;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+
+    log_config :
+    {
+      global_log_level                      ="debug";
+      global_log_verbosity                  ="medium";
+      hw_log_level                          ="info";
+      hw_log_verbosity                      ="medium";
+      phy_log_level                         ="info";
+      phy_log_verbosity                     ="medium";
+      mac_log_level                         ="info";
+      mac_log_verbosity                     ="high";
+      rlc_log_level                         ="info";
+      rlc_log_verbosity                     ="medium";
+      pdcp_log_level                        ="info";
+      pdcp_log_verbosity                    ="medium";
+      rrc_log_level                         ="info";
+      rrc_log_verbosity                     ="medium";
+   };
+
+  }
+);
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+        local_if_name  = "lo";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "udp_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -5,6 +5,9 @@ Asn1_verbosity = "none";
 eNBs =
 (
  {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+
     ////////// Identification parameters:
     eNB_ID    =  0xe00;
 
@@ -13,32 +16,31 @@ eNBs =
     eNB_name  =  "eNB_Eurecom_LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
     component_carriers = (
       {
-        node_function                                         = "eNodeB_3GPP";
+        node_function                                         = "NGFI_RCC_IF4p5";
         node_timing                                           = "synch_to_ext_device";
         node_synch_ref                                        = 0;
-        frame_type					      = "FDD";
-        tdd_config 					      = 3;
+        frame_type					      = "TDD";
+        tdd_config 					      = 1;
         tdd_config_s            			      = 0;
         prefix_type             			      = "NORMAL";
-        eutra_band              			      = 7;
-        downlink_frequency      			      = 2660000000L;
-        uplink_frequency_offset 			      = -120000000;
+        eutra_band              			      = 40;
+        downlink_frequency      			      = 2350000000L;
+        uplink_frequency_offset 			      = 0;
         Nid_cell					      = 0;
         N_RB_DL                 			      = 50;
         Nid_cell_mbsfn          			      = 0;
+        nb_antenna_ports          			      = 1;
         nb_antennas_tx          			      = 1;
         nb_antennas_rx          			      = 1;
-        tx_gain                                            = 32;
-        rx_gain                                            = 118;
+        tx_gain                                            = 90;
+        rx_gain                                            = 125;
         prach_root              			      = 0;
         prach_config_index      			      = 0;
         prach_high_speed        			      = "DISABLE";
@@ -47,8 +49,8 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 1;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
-        pdsch_referenceSignalPower 			      = -19;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-27;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
         pusch_enable64QAM          			      = "DISABLE";
@@ -66,9 +68,9 @@ eNBs =
         srs_ackNackST                                      =;
         srs_MaxUpPts                                       =;*/
 
-        pusch_p0_Nominal                                   = -90;
+        pusch_p0_Nominal                                   = -96;
         pusch_alpha                                        = "AL1";
-        pucch_p0_Nominal                                   = -108;
+        pucch_p0_Nominal                                   = -106;
         msg3_delta_Preamble                                = 6;
         pucch_deltaF_Format1                               = "deltaF2";
         pucch_deltaF_Format1b                              = "deltaF3";
@@ -99,6 +101,8 @@ eNBs =
         ue_TimersAndConstants_t311			      = 10000;
         ue_TimersAndConstants_n310			      = 20;
         ue_TimersAndConstants_n311			      = 1;
+
+	ue_TransmissionMode				      = 1;
       }
     );
 
@@ -133,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -143,11 +147,14 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
 
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :
@@ -170,3 +177,58 @@ eNBs =
 
   }
 );
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+        local_if_name  = "lo";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "udp_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf

@@ -0,0 +1,271 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+ 
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "NGFI_RCC_IF4p5";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2680000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 100;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 2;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -29;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+        local_if_name  = "lo";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "udp_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf

@@ -0,0 +1,271 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+ 
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "NGFI_RCC_IF4p5";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2680000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 25;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 2;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -25;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+        local_if_name  = "lo";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "udp_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf

@@ -0,0 +1,271 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+ 
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "NGFI_RCC_IF4p5";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2680000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 50;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 2;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -27;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+        local_if_name  = "lo";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "udp_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/rru.fdd.band7.conf

@@ -0,0 +1,45 @@
+RUs = (
+    {
+        local_if_name                    = "lo";
+        remote_address                   = "127.0.0.1"
+        local_address                    = "127.0.0.2";
+        local_portc                       = 50000;
+        remote_portc                      = 50000;
+        local_portd                       = 50001;
+        remote_portd                      = 50001;
+        local_rf                         = "yes"
+        tr_preference                    = "udp_if4p5";
+        nb_tx                            = 1;
+        nb_rx                            = 1;
+        max_pdschReferenceSignalPower    = -27;
+        max_rxgain                       = 115;
+        bands                            = [7];
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config = {
+      global_log_level                      ="error";
+      global_log_verbosity                  ="medium";
+      hw_log_level                          ="error";
+      hw_log_verbosity                      ="medium";
+      phy_log_level                         ="error";
+      phy_log_verbosity                     ="medium";
+      mac_log_level                         ="error";
+      mac_log_verbosity                     ="high";
+      rlc_log_level                         ="error";
+      rlc_log_verbosity                     ="medium";
+      pdcp_log_level                        ="error";
+      pdcp_log_verbosity                    ="medium";
+      rrc_log_level                         ="error";
+      rrc_log_verbosity                     ="medium";
+};
+

ci-scripts/conf_files/rru.tdd.band40.conf

@@ -0,0 +1,45 @@
+RUs = (
+    {
+        local_if_name                    = "lo";
+        remote_address                   = "127.0.0.1"
+        local_address                    = "127.0.0.2";
+        local_portc                       = 50000;
+        remote_portc                      = 50000;
+        local_portd                       = 50001;
+        remote_portd                      = 50001;
+        local_rf                         = "yes"
+        tr_preference                    = "udp_if4p5";
+        nb_tx                            = 1;
+        nb_rx                            = 1;
+        max_pdschReferenceSignalPower    = -27;
+        max_rxgain                       = 115;
+        bands                            = [40];
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config = {
+      global_log_level                      ="error";
+      global_log_verbosity                  ="medium";
+      hw_log_level                          ="error";
+      hw_log_verbosity                      ="medium";
+      phy_log_level                         ="error";
+      phy_log_verbosity                     ="medium";
+      mac_log_level                         ="error";
+      mac_log_verbosity                     ="high";
+      rlc_log_level                         ="error";
+      rlc_log_verbosity                     ="medium";
+      pdcp_log_level                        ="error";
+      pdcp_log_verbosity                    ="medium";
+      rrc_log_level                         ="error";
+      rrc_log_verbosity                     ="medium";
+};
+

ci-scripts/createVM.sh

@@ -0,0 +1,197 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI VM Creation script"
+    echo "   Original Author: Raphael Defosseux"
+    echo "   Requirements:"
+    echo "     -- uvtool uvtool-libvirt apt-cacher"
+    echo "     -- xenial image already synced"
+    echo "   Default:"
+    echo "     -- eNB with USRP"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo "    createVM.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
+    echo "    Specify the variant to build."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+function variant_usage {
+    echo "OAI VM Build Check script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
+    echo ""
+}
+
+if [ $# -lt 1 ] || [ $# -gt 6 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+VM_TEMPLATE=ci-
+JOB_NAME=XX
+BUILD_ID=XX
+VM_NAME=ci-enb-usrp
+VM_MEMORY=2048
+VM_CPU=4
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    shift
+    shift
+    ;;
+    -v1)
+    VM_NAME=ci-enb-usrp
+    shift
+    ;;
+    -v2)
+    VM_NAME=ci-basic-sim
+    VM_MEMORY=8192
+    shift
+    ;;
+    -v3)
+    VM_NAME=ci-phy-sim
+    shift
+    ;;
+    -v4)
+    VM_NAME=ci-cppcheck
+    VM_MEMORY=4096
+    VM_CPU=4
+    shift
+    ;;
+    -v7)
+    VM_NAME=ci-enb-ethernet
+    shift
+    ;;
+    -v8)
+    VM_NAME=ci-ue-ethernet
+    shift
+    ;;
+    --variant)
+    variant="$2"
+    case $variant in
+        enb-usrp)
+        VM_NAME=ci-enb-usrp
+        ;;
+        basic-sim)
+        VM_NAME=ci-basic-sim
+        VM_MEMORY=8192
+        ;;
+        phy-sim)
+        VM_NAME=ci-phy-sim
+        ;;
+        cppcheck)
+        VM_NAME=ci-cppcheck
+        VM_MEMORY=4096
+        VM_CPU=4
+        ;;
+        enb-ethernet)
+        VM_NAME=ci-enb-ethernet
+        ;;
+        ue-ethernet)
+        VM_NAME=ci-ue-ethernet
+        ;;
+        *)
+        echo ""
+        echo "Syntax Error: Invalid Variant option -> $variant"
+        echo ""
+        variant_usage
+        exit 1
+    esac
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
+then
+    VM_TEMPLATE=ci-
+else
+    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
+fi
+
+VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
+VM_CMDS=${VM_NAME}_cmds.txt
+
+echo "VM_NAME             = $VM_NAME"
+echo "VM_MEMORY           = $VM_MEMORY MBytes"
+echo "VM_CPU              = $VM_CPU"
+
+echo "############################################################"
+echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
+echo "############################################################"
+uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
+echo "Waiting for VM to be started"
+uvt-kvm wait $VM_NAME --insecure
+
+VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
+echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
+exit 0

ci-scripts/destroyAllRunningVM.sh

@@ -0,0 +1,101 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI VM Destroy script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo "    destroyAllRunningVM.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+if [ $# -gt 4 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+VM_TEMPLATE=ci-
+JOB_NAME=XX
+BUILD_ID=XX
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
+then
+    VM_TEMPLATE=ci-
+else
+    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
+fi
+
+LIST_CI_VM=`uvt-kvm list | grep $VM_TEMPLATE`
+
+for CI_VM in $LIST_CI_VM
+do
+    VM_IP_ADDR=`uvt-kvm ip $CI_VM`
+    echo "VM to destroy: $CI_VM -- IP $VM_IP_ADDR"
+    uvt-kvm destroy $CI_VM
+    ssh-keygen -R $VM_IP_ADDR
+done
+
+exit 0
+

ci-scripts/doGitLabMerge.sh

@@ -0,0 +1,113 @@
+#!/bin/bash
+
+function usage {
+    echo "OAI GitLab merge request applying script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo ""
+    echo "    doGitLabMerge.sh [OPTIONS] [MANDATORY_OPTIONS]"
+    echo ""
+    echo "Mandatory Options:"
+    echo "------------------"
+    echo ""
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --src-commit #### OR -sc ####"
+    echo "    Specify the source commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --target-commit #### OR -tc ####"
+    echo "    Specify the target commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+if [ $# -ne 8 ] && [ $# -ne 1 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+checker=0
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -sb|--src-branch)
+    SOURCE_BRANCH="$2"
+    let "checker|=0x1"
+    shift
+    shift
+    ;;
+    -sc|--src-commit)
+    SOURCE_COMMIT_ID="$2"
+    let "checker|=0x2"
+    shift
+    shift
+    ;;
+    -tb|--target-branch)
+    TARGET_BRANCH="$2"
+    let "checker|=0x4"
+    shift
+    shift
+    ;;
+    -tc|--target-commit)
+    TARGET_COMMIT_ID="$2"
+    let "checker|=0x8"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+
+done
+
+echo "Source Branch is    : $SOURCE_BRANCH"
+echo "Source Commit ID is : $SOURCE_COMMIT_ID"
+echo "Target Branch is    : $TARGET_BRANCH"
+echo "Target Commit ID is : $TARGET_COMMIT_ID"
+
+if [ $checker -ne 15 ]
+then
+    echo ""
+    echo "Syntax Error: missing option"
+    echo ""
+    usage
+    exit 1
+fi
+
+git config user.email "jenkins@openairinterface.org"
+git config user.name "OAI Jenkins"
+
+git checkout -f $SOURCE_COMMIT_ID
+
+git merge --ff $TARGET_COMMIT_ID -m "Temporary merge for CI"
+
+STATUS=`git status | egrep -c "You have unmerged paths.|fix conflicts"`
+if [ $STATUS -ne 0 ]
+then
+    echo "There are merge conflicts.. Cannot perform further build tasks"
+    STATUS=-1
+fi
+exit $STATUS

ci-scripts/fail.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+exit -1

ci-scripts/reportBuildLocally.sh

@@ -0,0 +1,604 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI Local Build Report script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo ""
+    echo "    reportBuildLocally.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+    echo "Job Options:"
+    echo "------------"
+    echo ""
+    echo "    --git-url #### OR -gu ####"
+    echo "    Specify the URL of the GIT Repository."
+    echo ""
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --trigger merge-request OR -mr"
+    echo "    --trigger push          OR -pu"
+    echo "    Specify trigger action of the Jenkins job. Either a merge-request event or a push event."
+    echo ""
+    echo "Merge-Request Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --src-commit #### OR -sc ####"
+    echo "    Specify the source commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --target-commit #### OR -tc ####"
+    echo "    Specify the target commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "Push Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --branch #### OR -br ####"
+    echo "    Specify the branch of the push event."
+    echo ""
+    echo "    --commit #### OR -co ####"
+    echo "    Specify the commit ID (SHA-1) of the push event."
+    echo ""
+    echo ""
+}
+
+function trigger_usage {
+    echo "OAI Local Build Report script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "    --trigger merge-request OR -mr"
+    echo "    --trigger push          OR -pu"
+    echo "    Specify trigger action of the Jenkins job. Either a merge-request event or a push event."
+    echo ""
+}
+
+function details_table {
+    echo "   <h4>$1</h4>" >> $3
+
+    echo "   <table border = \"1\">" >> $3
+    echo "      <tr bgcolor = \"#33CCFF\" >" >> $3
+    echo "        <th>File</th>" >> $3
+    echo "        <th>Line Number</th>" >> $3
+    echo "        <th>Status</th>" >> $3
+    echo "        <th>Message</th>" >> $3
+    echo "      </tr>" >> $3
+
+    LIST_MESSAGES=`egrep "error:|warning:" $2 | egrep -v "jobserver unavailable|Clock skew detected.|flexran.proto"`
+    COMPLETE_MESSAGE="start"
+    for MESSAGE in $LIST_MESSAGES
+    do
+        if [[ $MESSAGE == *"/home/ubuntu/tmp"* ]]
+        then
+            FILENAME=`echo $MESSAGE | sed -e "s#^/home/ubuntu/tmp/##" -e "s#^.*/tmp/CI-eNB/##" | awk -F ":" '{print $1}'`
+            LINENB=`echo $MESSAGE | awk -F ":" '{print $2}'`
+            if [ "$COMPLETE_MESSAGE" != "start" ]
+            then
+                COMPLETE_MESSAGE=`echo $COMPLETE_MESSAGE | sed -e "s#‘#'#g" -e "s#’#'#g"`
+                echo "        <td>$COMPLETE_MESSAGE</td>" >> $3
+                echo "      </tr>" >> $3
+            fi
+            echo "      <tr>" >> $3
+            echo "        <td>$FILENAME</td>" >> $3
+            echo "        <td>$LINENB</td>" >> $3
+        else
+            if [[ $MESSAGE == *"warning:"* ]] || [[ $MESSAGE == *"error:"* ]]
+            then
+                MSGTYPE=`echo $MESSAGE | sed -e "s#:##g"`
+                echo "        <td>$MSGTYPE</td>" >> $3
+                COMPLETE_MESSAGE=""
+            else
+                COMPLETE_MESSAGE=$COMPLETE_MESSAGE" "$MESSAGE
+            fi
+        fi
+    done
+
+    if [ "$COMPLETE_MESSAGE" != "start" ]
+    then
+        COMPLETE_MESSAGE=`echo $COMPLETE_MESSAGE | sed -e "s#‘#'#g" -e "s#’#'#g"`
+        echo "        <td>$COMPLETE_MESSAGE</td>" >> $3
+        echo "      </tr>" >> $3
+    fi
+    echo "   </table>" >> $3
+}
+
+function summary_table_header {
+    echo "   <h3>$1</h3>" >> ./build_results.html
+    echo "   <table border = \"1\">" >> ./build_results.html
+    echo "      <tr bgcolor = \"#33CCFF\" >" >> ./build_results.html
+    echo "        <th>Element</th>" >> ./build_results.html
+    echo "        <th>Status</th>" >> ./build_results.html
+    echo "        <th>Nb Errors</th>" >> ./build_results.html
+    echo "        <th>Nb Warnings</th>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+}
+
+function summary_table_row {
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >$1</th>" >> ./build_results.html
+    if [ -f $2 ]
+    then
+        STATUS=`egrep -c "$3" $2`
+        if [ $STATUS -eq 1 ]
+        then
+            echo "        <td bgcolor = \"green\" >OK</th>" >> ./build_results.html
+        else
+            echo "        <td bgcolor = \"red\" >KO</th>" >> ./build_results.html
+        fi
+        NB_ERRORS=`egrep -c "error:" $2`
+        if [ $NB_ERRORS -eq 0 ]
+        then
+            echo "        <td bgcolor = \"green\" >$NB_ERRORS</th>" >> ./build_results.html
+        else
+            echo "        <td bgcolor = \"red\" >$NB_ERRORS</th>" >> ./build_results.html
+        fi
+        NB_WARNINGS=`egrep "warning:" $2 | egrep -v "jobserver unavailable|Clock skew detected.|flexran.proto" | egrep -c "warning:"`
+        if [ $NB_WARNINGS -eq 0 ]
+        then
+            echo "        <td bgcolor = \"green\" >$NB_WARNINGS</th>" >> ./build_results.html
+        else
+            if [ $NB_WARNINGS -gt 20 ]
+            then
+                echo "        <td bgcolor = \"red\" >$NB_WARNINGS</th>" >> ./build_results.html
+            else
+                echo "        <td bgcolor = \"orange\" >$NB_WARNINGS</th>" >> ./build_results.html
+            fi
+        fi
+        if [ $NB_ERRORS -ne 0 ] || [ $NB_WARNINGS -ne 0 ]
+        then
+            details_table "$1" $2 $4
+        fi
+    else
+        echo "        <td bgcolor = \"lightgray\" >Unknown</th>" >> ./build_results.html
+        echo "        <td bgcolor = \"lightgray\" >--</th>" >> ./build_results.html
+        echo "        <td bgcolor = \"lightgray\" >--</th>" >> ./build_results.html
+    fi
+    echo "      </tr>" >> ./build_results.html
+}
+
+function summary_table_footer {
+    echo "   </table>" >> ./build_results.html
+}
+
+function sca_summary_table_header {
+    echo "   <h3>$1</h3>" >> ./build_results.html
+    echo "   <table border = \"1\">" >> ./build_results.html
+    echo "      <tr bgcolor = \"#33CCFF\" >" >> ./build_results.html
+    echo "        <th>Error / Warning Type</th>" >> ./build_results.html
+    echo "        <th>Nb Errors</th>" >> ./build_results.html
+    echo "        <th>Nb Warnings</th>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "0" > ccp_error_cnt.txt
+}
+
+function sca_summary_table_row {
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >$2</td>" >> ./build_results.html
+    if [ -f $1 ]
+    then
+        NB_ERRORS=`egrep "severity=\"error\"" $1 | egrep -c "id=\"$3\""`
+        echo "        <td>$NB_ERRORS</td>" >> ./build_results.html
+        echo "        <td>N/A</td>" >> ./build_results.html
+        if [ -f ccp_error_cnt.txt ]
+        then
+            TOTAL_ERRORS=`cat ccp_error_cnt.txt`
+            TOTAL_ERRORS=$((TOTAL_ERRORS + NB_ERRORS))
+            echo $TOTAL_ERRORS > ccp_error_cnt.txt
+        fi
+    else
+        echo "        <td>Unknown</td>" >> ./build_results.html
+        echo "        <td>Unknown</td>" >> ./build_results.html
+    fi
+    echo "      </tr>" >> ./build_results.html
+}
+
+function sca_summary_table_footer {
+    if [ -f $1 ]
+    then
+        NB_ERRORS=`egrep -c "severity=\"error\"" $1`
+        NB_WARNINGS=`egrep -c "severity=\"warning\"" $1`
+        if [ -f ccp_error_cnt.txt ]
+        then
+            echo "      <tr>" >> ./build_results.html
+            echo "        <td bgcolor = \"lightcyan\" >Others</td>" >> ./build_results.html
+            TOTAL_ERRORS=`cat ccp_error_cnt.txt`
+            TOTAL_ERRORS=$((NB_ERRORS - TOTAL_ERRORS))
+            echo "        <td>$TOTAL_ERRORS</td>" >> ./build_results.html
+            echo "        <td>$NB_WARNINGS</td>" >> ./build_results.html
+            echo "      </tr>" >> ./build_results.html
+            rm -f ccp_error_cnt.txt
+        fi
+        echo "      <tr bgcolor = \"#33CCFF\" >" >> ./build_results.html
+        echo "        <th>Total</th>" >> ./build_results.html
+        echo "        <th>$NB_ERRORS</th>" >> ./build_results.html
+        echo "        <th>$NB_WARNINGS</th>" >> ./build_results.html
+    else
+        echo "      <tr bgcolor = \"#33CCFF\"  >" >> ./build_results.html
+        echo "        <th>Total</th>" >> ./build_results.html
+        echo "        <th>Unknown</th>" >> ./build_results.html
+        echo "        <th>Unknown</th>" >> ./build_results.html
+        if [ -f ccp_error_cnt.txt ]
+        then
+            rm -f ccp_error_cnt.txt
+        fi
+    fi
+    echo "      </tr>" >> ./build_results.html
+    echo "   </table>" >> ./build_results.html
+    echo "   <p>Full details in zipped artifact (cppcheck/cppcheck.xml) </p>" >> ./build_results.html
+    echo "   <p style=\"margin-left: 30px\">Graphical Interface tool : <strong><code>cppcheck-gui -l cppcheck/cppcheck.xml</code></strong></p>" >> ./build_results.html
+}
+
+jb_checker=0
+mr_checker=0
+pu_checker=0
+MR_TRIG=0
+PU_TRIG=0
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -gu|--git-url)
+    GIT_URL="$2"
+    let "jb_checker|=0x1"
+    shift
+    shift
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    let "jb_checker|=0x2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    let "jb_checker|=0x4"
+    shift
+    shift
+    ;;
+    --trigger)
+    TRIG="$2"
+    case $TRIG in
+        merge-request)
+        MR_TRIG=1
+        ;;
+        push)
+        PU_TRIG=1
+        ;;
+        *)
+        echo ""
+        echo "Syntax Error: Invalid Trigger option -> $TRIG"
+        echo ""
+        trigger_usage
+        exit
+        ;;
+    esac
+    let "jb_checker|=0x8"
+    shift
+    shift
+    ;;
+    -mr)
+    MR_TRIG=1
+    let "jb_checker|=0x8"
+    shift
+    ;;
+    -pu)
+    PU_TRIG=1
+    let "jb_checker|=0x8"
+    shift
+    ;;
+    -sb|--src-branch)
+    SOURCE_BRANCH="$2"
+    let "mr_checker|=0x1"
+    shift
+    shift
+    ;;
+    -sc|--src-commit)
+    SOURCE_COMMIT_ID="$2"
+    let "mr_checker|=0x2"
+    shift
+    shift
+    ;;
+    -tb|--target-branch)
+    TARGET_BRANCH="$2"
+    let "mr_checker|=0x4"
+    shift
+    shift
+    ;;
+    -tc|--target-commit)
+    TARGET_COMMIT_ID="$2"
+    let "mr_checker|=0x8"
+    shift
+    shift
+    ;;
+    -br|--branch)
+    SOURCE_BRANCH="$2"
+    let "pu_checker|=0x1"
+    shift
+    shift
+    ;;
+    -co|--commit)
+    SOURCE_COMMIT_ID="$2"
+    let "pu_checker|=0x2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+    ;;
+esac
+
+done
+
+if [ $jb_checker -ne 15 ]
+then
+    echo ""
+    echo "Syntax Error: missing job information."
+    # TODO : list missing info
+    echo ""
+    exit 1
+fi
+
+if [ $PU_TRIG -eq 1 ] && [ $MR_TRIG -eq 1 ]
+then
+    echo ""
+    echo "Syntax Error: trigger action incoherent."
+    echo ""
+    trigger_usage
+    exit 1
+fi
+
+if [ $PU_TRIG -eq 1 ]
+then
+    if [ $pu_checker -ne 3 ]
+    then
+        echo ""
+        echo "Syntax Error: missing push information."
+        # TODO : list missing info
+        echo ""
+        exit 1
+    fi
+fi
+
+if [ $MR_TRIG -eq 1 ]
+then
+    if [ $mr_checker -ne 15 ]
+    then
+        echo ""
+        echo "Syntax Error: missing merge-request information."
+        # TODO : list missing info
+        echo ""
+        exit 1
+    fi
+fi
+
+echo "<!DOCTYPE html>" > ./build_results.html
+echo "<html class=\"no-js\" lang=\"en-US\">" >> ./build_results.html
+echo "<head>" >> ./build_results.html
+echo "  <title>Build Results for $JOB_NAME job build #$BUILD_ID</title>" >> ./build_results.html
+echo "  <base href = \"http://www.openairinterface.org/\" />" >> ./build_results.html
+echo "</head>" >> ./build_results.html
+echo "<body>" >> ./build_results.html
+echo "  <table style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
+echo "    <tr style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
+echo "      <td style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
+echo "        <a href=\"http://www.openairinterface.org/\">" >> ./build_results.html
+echo "           <img src=\"/wp-content/uploads/2016/03/cropped-oai_final_logo2.png\" alt=\"\" border=\"none\" height=50 width=150>" >> ./build_results.html
+echo "           </img>" >> ./build_results.html
+echo "        </a>" >> ./build_results.html
+echo "      </td>" >> ./build_results.html
+echo "      <td style=\"border-collapse: collapse; border: none; vertical-align: center;\">" >> ./build_results.html
+echo "        <b><font size = \"6\">Job Summary -- Job: $JOB_NAME -- Build-ID: $BUILD_ID</font></b>" >> ./build_results.html
+echo "      </td>" >> ./build_results.html
+echo "    </tr>" >> ./build_results.html
+echo "  </table>" >> ./build_results.html
+echo "  <br>" >> ./build_results.html
+echo "   <table border = \"1\">" >> ./build_results.html
+echo "      <tr>" >> ./build_results.html
+echo "        <td bgcolor = \"lightcyan\" >Build Start Time (UTC)</td>" >> ./build_results.html
+echo "        <td>TEMPLATE_BUILD_TIME</td>" >> ./build_results.html
+echo "      </tr>" >> ./build_results.html
+echo "      <tr>" >> ./build_results.html
+echo "        <td bgcolor = \"lightcyan\" >GIT Repository</td>" >> ./build_results.html
+echo "        <td>$GIT_URL</td>" >> ./build_results.html
+echo "      </tr>" >> ./build_results.html
+echo "      <tr>" >> ./build_results.html
+echo "        <td bgcolor = \"lightcyan\" >Job Trigger</td>" >> ./build_results.html
+if [ $PU_TRIG -eq 1 ]; then echo "        <td>Push Event</td>" >> ./build_results.html; fi
+if [ $MR_TRIG -eq 1 ]; then echo "        <td>Merge-Request</td>" >> ./build_results.html; fi
+echo "      </tr>" >> ./build_results.html
+if [ $PU_TRIG -eq 1 ]
+then
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Branch</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_BRANCH</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Commit ID</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+fi
+if [ $MR_TRIG -eq 1 ]
+then
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Source Branch</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_BRANCH</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Source Commit ID</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Target Branch</td>" >> ./build_results.html
+    echo "        <td>$TARGET_BRANCH</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Target Commit ID</td>" >> ./build_results.html
+    echo "        <td>$TARGET_COMMIT_ID</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+fi
+echo "   </table>" >> ./build_results.html
+echo "   <h2>Build Summary</h2>" >> ./build_results.html
+
+if [ -f ./oai_rules_result.txt ]
+then
+    echo "   <h3>OAI Coding / Formatting Guidelines Check</h3>" >> ./build_results.html
+    echo "   <table border = "1">" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Result:</td>" >> ./build_results.html
+    NB_FILES=`cat ./oai_rules_result.txt`
+    if [ $NB_FILES = "0" ]
+    then 
+        if [ $PU_TRIG -eq 1 ]; then echo "        <td bgcolor = \"green\">All files in repository follow OAI rules. </td>" >> ./build_results.html; fi
+        if [ $MR_TRIG -eq 1 ]; then echo "        <td bgcolor = \"green\">All modified files in Merge-Request follow OAI rules.</td>" >> ./build_results.html; fi
+        echo "      </tr>" >> ./build_results.html
+        echo "   </table>" >> ./build_results.html
+    else
+        if [ $PU_TRIG -eq 1 ]; then echo "        <td bgcolor = \"orange\">$NB_FILES files in repository DO NOT follow OAI rules. </td>" >> ./build_results.html; fi
+        if [ $MR_TRIG -eq 1 ]; then echo "        <td bgcolor = \"orange\">$NB_FILES modified files in Merge-Request DO NOT follow OAI rules.</td>" >> ./build_results.html; fi
+        echo "      </tr>" >> ./build_results.html
+        if [ -f ./oai_rules_result_list.txt ]
+        then
+            awk '{print "      <tr><td></td><td>"$1"</td></tr>"}' ./oai_rules_result_list.txt >> ./build_results.html
+        fi
+        echo "   </table>" >> ./build_results.html
+        echo "   <p>Please apply the following command to this(ese) file(s): </p>" >> ./build_results.html
+        echo "   <p style=\"margin-left: 30px\"><strong><code>astyle --options=ci-scripts/astyle-options.txt filename(s)</code></strong></p>" >> ./build_results.html
+    fi
+fi
+
+echo "   <h2>Ubuntu 16.04 LTS -- Summary</h2>" >> ./build_results.html
+
+sca_summary_table_header "OAI Static Code Analysis with CPPCHECK"
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized variable" uninitvar
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized struct member" uninitStructMember
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory leak" memleak
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory is freed twice" doubleFree
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Resource leak" resourceLeak
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Possible null pointer dereference" nullPointer
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Array access  out of bounds" arrayIndexOutOfBounds
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Buffer is accessed out of bounds" bufferAccessOutOfBounds
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Expression depends on order of evaluation of side effects" unknownEvaluationOrder
+sca_summary_table_footer ./archives/cppcheck/cppcheck.xml
+
+summary_table_header "OAI Build eNB -- USRP option"
+summary_table_row "LTE SoftModem - Release 14" ./archives/enb_usrp/lte-softmodem.Rel14.txt "Built target lte-softmodem" ./enb_usrp_row1.html
+summary_table_row "Coding - Release 14" ./archives/enb_usrp/coding.Rel14.txt "Built target coding" ./enb_usrp_row2.html
+summary_table_row "OAI USRP device if - Release 14" ./archives/enb_usrp/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./enb_usrp_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/enb_usrp/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_usrp_row4.html
+summary_table_footer
+
+summary_table_header "OAI Build basic simulator option"
+summary_table_row "Basic Simulator eNb - Release 14" ./archives/basic_sim/basic_simulator_enb.txt "Built target lte-softmodem" ./basic_sim_row1.html
+summary_table_row "Basic Simulator UE - Release 14" ./archives/basic_sim/basic_simulator_ue.txt "Built target lte-uesoftmodem" ./basic_sim_row2.html
+summary_table_row "Conf 2 UE data - Release 14" ./archives/basic_sim/conf2uedata.Rel14.txt "Built target conf2uedata" ./basic_sim_row3.html
+summary_table_footer
+
+summary_table_header "OAI Build Physical simulators option"
+summary_table_row "DL Simulator - Release 14" ./archives/phy_sim/dlsim.Rel14.txt "Built target dlsim" ./phy_sim_row1.html
+summary_table_row "UL Simulator - Release 14" ./archives/phy_sim/ulsim.Rel14.txt "Built target ulsim" ./phy_sim_row2.html
+summary_table_row "Coding - Release 14" ./archives/phy_sim/coding.Rel14.txt "Built target coding" ./phy_sim_row3.html
+summary_table_footer
+
+summary_table_header "OAI Build eNB -- ETHERNET transport option"
+summary_table_row "LTE SoftModem w/o S1 - Release 14" ./archives/enb_eth/lte-softmodem-nos1.Rel14.txt "Built target lte-softmodem" ./enb_eth_row1.html
+summary_table_row "Coding - Release 14" ./archives/enb_eth/coding.Rel14.txt "Built target coding" ./enb_eth_row2.html
+summary_table_row "OAI ETHERNET transport - Release 14" ./archives/enb_eth/oai_eth_transpro.Rel14.txt "Built target oai_eth_transpro" ./enb_eth_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/enb_eth/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_eth_row4.html
+summary_table_row "RB Tools - Release 14" ./archives/enb_eth/rb_tool.Rel14.txt "Built target rb_tool" ./enb_eth_row5.html
+summary_table_row "NAS Mesh - Release 14" ./archives/enb_eth/nasmesh.Rel14.txt "Built target nasmesh" ./enb_eth_row6.html
+summary_table_footer
+
+summary_table_header "OAI Build UE -- ETHERNET transport option"
+summary_table_row "LTE UE SoftModem w/o S1 - Release 14" ./archives/ue_eth/lte-uesoftmodem-nos1.Rel14.txt "Built target lte-uesoftmodem" ./ue_eth_row1.html
+summary_table_row "Coding - Release 14" ./archives/ue_eth/coding.Rel14.txt "Built target coding" ./ue_eth_row2.html
+summary_table_row "OAI ETHERNET transport - Release 14" ./archives/ue_eth/oai_eth_transpro.Rel14.txt "Built target oai_eth_transpro" ./ue_eth_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/ue_eth/params_libconfig.Rel14.txt "Built target params_libconfig" ./ue_eth_row4.html
+summary_table_row "RB Tools - Release 14" ./archives/ue_eth/rb_tool.Rel14.txt "Built target rb_tool" ./ue_eth_row5.html
+summary_table_row "NAS Mesh - Release 14" ./archives/ue_eth/nasmesh.Rel14.txt "Built target nasmesh" ./ue_eth_row6.html
+summary_table_footer
+
+echo "   <h2>Red Hat (CentOS Linux release 7.4.1708) -- Summary</h2>" >> ./build_results.html
+
+summary_table_header "Red Hat -- OAI Build eNB -- USRP option"
+summary_table_row "LTE SoftModem - Release 14" ./archives/red_hat/lte-softmodem.Rel14.txt "Built target lte-softmodem" ./enb_usrp_rh_row1.html
+summary_table_row "Coding - Release 14" ./archives/red_hat/coding.Rel14.txt "Built target coding" ./enb_usrp_rh_row2.html
+summary_table_row "OAI USRP device if - Release 14" ./archives/red_hat/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./enb_usrp_rh_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/red_hat/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_usrp_rh_row4.html
+summary_table_footer
+
+echo "   <h3>Details</h3>" >> ./build_results.html
+
+for DETAILS_TABLE in `ls ./enb_usrp_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./basic_sim_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./phy_sim_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./enb_eth_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./ue_eth_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./enb_usrp_rh_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+rm -f ./enb_usrp_row*.html ./basic_sim_row*.html ./phy_sim_row*.html ./enb_eth_row*.html ./ue_eth_row*.html ./enb_usrp_rh_row*.html
+
+echo "</body>" >> ./build_results.html
+echo "</html>" >> ./build_results.html
+
+exit 0

ci-scripts/reportTestLocally.sh

@@ -0,0 +1,590 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI Test Report script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo ""
+    echo "    reportTestLocally.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+    echo "Job Options:"
+    echo "------------"
+    echo ""
+    echo "    --git-url #### OR -gu ####"
+    echo "    Specify the URL of the GIT Repository."
+    echo ""
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --trigger merge-request OR -mr"
+    echo "    --trigger push          OR -pu"
+    echo "    Specify trigger action of the Jenkins job. Either a merge-request event or a push event."
+    echo ""
+    echo "Merge-Request Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --src-commit #### OR -sc ####"
+    echo "    Specify the source commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --target-commit #### OR -tc ####"
+    echo "    Specify the target commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "Push Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --branch #### OR -br ####"
+    echo "    Specify the branch of the push event."
+    echo ""
+    echo "    --commit #### OR -co ####"
+    echo "    Specify the commit ID (SHA-1) of the push event."
+    echo ""
+    echo ""
+}
+
+function trigger_usage {
+    echo "OAI Test Report script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "    --trigger merge-request OR -mr"
+    echo "    --trigger push          OR -pu"
+    echo "    Specify trigger action of the Jenkins job. Either a merge-request event or a push event."
+    echo ""
+}
+
+jb_checker=0
+mr_checker=0
+pu_checker=0
+MR_TRIG=0
+PU_TRIG=0
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -gu|--git-url)
+    GIT_URL="$2"
+    let "jb_checker|=0x1"
+    shift
+    shift
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    let "jb_checker|=0x2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    let "jb_checker|=0x4"
+    shift
+    shift
+    ;;
+    --trigger)
+    TRIG="$2"
+    case $TRIG in
+        merge-request)
+        MR_TRIG=1
+        ;;
+        push)
+        PU_TRIG=1
+        ;;
+        *)
+        echo ""
+        echo "Syntax Error: Invalid Trigger option -> $TRIG"
+        echo ""
+        trigger_usage
+        exit
+        ;;
+    esac
+    let "jb_checker|=0x8"
+    shift
+    shift
+    ;;
+    -mr)
+    MR_TRIG=1
+    let "jb_checker|=0x8"
+    shift
+    ;;
+    -pu)
+    PU_TRIG=1
+    let "jb_checker|=0x8"
+    shift
+    ;;
+    -sb|--src-branch)
+    SOURCE_BRANCH="$2"
+    let "mr_checker|=0x1"
+    shift
+    shift
+    ;;
+    -sc|--src-commit)
+    SOURCE_COMMIT_ID="$2"
+    let "mr_checker|=0x2"
+    shift
+    shift
+    ;;
+    -tb|--target-branch)
+    TARGET_BRANCH="$2"
+    let "mr_checker|=0x4"
+    shift
+    shift
+    ;;
+    -tc|--target-commit)
+    TARGET_COMMIT_ID="$2"
+    let "mr_checker|=0x8"
+    shift
+    shift
+    ;;
+    -br|--branch)
+    SOURCE_BRANCH="$2"
+    let "pu_checker|=0x1"
+    shift
+    shift
+    ;;
+    -co|--commit)
+    SOURCE_COMMIT_ID="$2"
+    let "pu_checker|=0x2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+    ;;
+esac
+
+done
+
+if [ $jb_checker -ne 15 ]
+then
+    echo ""
+    echo "Syntax Error: missing job information."
+    # TODO : list missing info
+    echo ""
+    exit 1
+fi
+
+if [ $PU_TRIG -eq 1 ] && [ $MR_TRIG -eq 1 ]
+then
+    echo ""
+    echo "Syntax Error: trigger action incoherent."
+    echo ""
+    trigger_usage
+    exit 1
+fi
+
+if [ $PU_TRIG -eq 1 ]
+then
+    if [ $pu_checker -ne 3 ]
+    then
+        echo ""
+        echo "Syntax Error: missing push information."
+        # TODO : list missing info
+        echo ""
+        exit 1
+    fi
+fi
+
+if [ $MR_TRIG -eq 1 ]
+then
+    if [ $mr_checker -ne 15 ]
+    then
+        echo ""
+        echo "Syntax Error: missing merge-request information."
+        # TODO : list missing info
+        echo ""
+        exit 1
+    fi
+fi
+
+echo "<!DOCTYPE html>" > ./test_simulator_results.html
+echo "<html class=\"no-js\" lang=\"en-US\">" >> ./test_simulator_results.html
+echo "<head>" >> ./test_simulator_results.html
+echo "  <title>Simulator Results for $JOB_NAME job build #$BUILD_ID</title>" >> ./test_simulator_results.html
+echo "  <base href = \"http://www.openairinterface.org/\" />" >> ./test_simulator_results.html
+echo "</head>" >> ./test_simulator_results.html
+echo "<body>" >> ./test_simulator_results.html
+echo "  <table style=\"border-collapse: collapse; border: none;\">" >> ./test_simulator_results.html
+echo "    <tr style=\"border-collapse: collapse; border: none;\">" >> ./test_simulator_results.html
+echo "      <td style=\"border-collapse: collapse; border: none;\">" >> ./test_simulator_results.html
+echo "        <a href=\"http://www.openairinterface.org/\">" >> ./test_simulator_results.html
+echo "           <img src=\"/wp-content/uploads/2016/03/cropped-oai_final_logo2.png\" alt=\"\" border=\"none\" height=50 width=150>" >> ./test_simulator_results.html
+echo "           </img>" >> ./test_simulator_results.html
+echo "        </a>" >> ./test_simulator_results.html
+echo "      </td>" >> ./test_simulator_results.html
+echo "      <td style=\"border-collapse: collapse; border: none; vertical-align: center;\">" >> ./test_simulator_results.html
+echo "        <b><font size = \"6\">Job Summary -- Job: $JOB_NAME -- Build-ID: $BUILD_ID</font></b>" >> ./test_simulator_results.html
+echo "      </td>" >> ./test_simulator_results.html
+echo "    </tr>" >> ./test_simulator_results.html
+echo "  </table>" >> ./test_simulator_results.html
+echo "  <br>" >> ./test_simulator_results.html
+echo "   <table border = \"1\">" >> ./test_simulator_results.html
+echo "      <tr>" >> ./test_simulator_results.html
+echo "        <td bgcolor = \"lightcyan\" >Build Start Time (UTC)</td>" >> ./test_simulator_results.html
+echo "        <td>TEMPLATE_BUILD_TIME</td>" >> ./test_simulator_results.html
+echo "      </tr>" >> ./test_simulator_results.html
+echo "      <tr>" >> ./test_simulator_results.html
+echo "        <td bgcolor = \"lightcyan\" >GIT Repository</td>" >> ./test_simulator_results.html
+echo "        <td><a href=\"$GIT_URL\">$GIT_URL</a></td>" >> ./test_simulator_results.html
+echo "      </tr>" >> ./test_simulator_results.html
+echo "      <tr>" >> ./test_simulator_results.html
+echo "        <td bgcolor = \"lightcyan\" >Job Trigger</td>" >> ./test_simulator_results.html
+if [ $PU_TRIG -eq 1 ]; then echo "        <td>Push Event</td>" >> ./test_simulator_results.html; fi
+if [ $MR_TRIG -eq 1 ]; then echo "        <td>Merge-Request</td>" >> ./test_simulator_results.html; fi
+echo "      </tr>" >> ./test_simulator_results.html
+if [ $PU_TRIG -eq 1 ]
+then
+    echo "      <tr>" >> ./test_simulator_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Branch</td>" >> ./test_simulator_results.html
+    echo "        <td>$SOURCE_BRANCH</td>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+    echo "      <tr>" >> ./test_simulator_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Commit ID</td>" >> ./test_simulator_results.html
+    echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+fi
+if [ $MR_TRIG -eq 1 ]
+then
+    echo "      <tr>" >> ./test_simulator_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Source Branch</td>" >> ./test_simulator_results.html
+    echo "        <td>$SOURCE_BRANCH</td>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+    echo "      <tr>" >> ./test_simulator_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Source Commit ID</td>" >> ./test_simulator_results.html
+    echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+    echo "      <tr>" >> ./test_simulator_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Target Branch</td>" >> ./test_simulator_results.html
+    echo "        <td>$TARGET_BRANCH</td>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+    echo "      <tr>" >> ./test_simulator_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Target Commit ID</td>" >> ./test_simulator_results.html
+    echo "        <td>$TARGET_COMMIT_ID</td>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+fi
+echo "   </table>" >> ./test_simulator_results.html
+echo "   <h2>Test Summary</h2>" >> ./test_simulator_results.html
+
+ARCHIVES_LOC=archives/basic_sim/test
+if [ -d $ARCHIVES_LOC ]
+then
+    echo "   <h3>Basic Simulator Check</h3>" >> ./test_simulator_results.html
+
+    echo "   <table border = \"1\">" >> ./test_simulator_results.html
+    echo "      <tr bgcolor = \"#33CCFF\" >" >> ./test_simulator_results.html
+    echo "        <th>Log File Name</th>" >> ./test_simulator_results.html
+    echo "        <th>Command</th>" >> ./test_simulator_results.html
+    echo "        <th>Status</th>" >> ./test_simulator_results.html
+    echo "        <th>Statistics</th>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+
+    TRANS_MODES=("fdd" "tdd")
+    BW_CASES=(05 10 20)
+    for TMODE in ${TRANS_MODES[@]}
+    do
+        for BW in ${BW_CASES[@]}
+        do
+            ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_enb.log
+            UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
+            if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
+            then
+                NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                echo "      <tr>" >> ./test_simulator_results.html
+                echo "        <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
+                echo "        <td>N/A</td>" >> ./test_simulator_results.html
+                NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
+                NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG`
+                NB_ENB_SYNCED_WITH_UE=`egrep -c "got UE capabilities for UE" $ENB_LOG`
+                if [ $NB_ENB_GOT_SYNC -eq 1 ] && [ $NB_UE_GOT_SYNC -eq 2 ] && [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
+                then
+                    echo "        <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
+                else
+                    echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                fi
+                echo "        <td><pre>" >> ./test_simulator_results.html
+                if [ $NB_ENB_GOT_SYNC -eq 1 ]
+                then
+                    echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
+                fi
+                if [ $NB_UE_GOT_SYNC -eq 2 ]
+                then
+                    echo "<font color = \"blue\">- UE --> got sync</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- UE NEVER got sync</b></font>" >> ./test_simulator_results.html
+                fi
+                if [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
+                then
+                    echo "<font color = \"blue\">- UE attached to eNB</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
+                fi
+                NB_SEGFAULT_ENB=`egrep -i -c "Segmentation Fault" $ENB_LOG`
+                if [ $NB_SEGFAULT_ENB -ne 0 ]
+                then
+                    echo "<font color = \"red\"><b>- eNB --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
+                fi
+                NB_SEGFAULT_UE=`egrep -i -c "Segmentation Fault" $UE_LOG`
+                if [ $NB_SEGFAULT_UE -ne 0 ]
+                then
+                    echo "<font color = \"red\"><b>- UE --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
+                fi
+                NB_ASSERTION_ENB=`egrep -i -c "Assertion" $ENB_LOG`
+                if [ $NB_ASSERTION_ENB -ne 0 ]
+                then
+                    echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
+                    awk 'BEGIN{assertion=10}{if(assertion < 3){print "    " $0; assertion++};if ($0 ~/Assertion/){print "    " $0;assertion=1}}END{}' $ENB_LOG >> ./test_simulator_results.html
+                fi
+                NB_ASSERTION_UE=`egrep -i -c "Assertion" $UE_LOG`
+                if [ $NB_ASSERTION_UE -ne 0 ]
+                then
+                    echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
+                    awk 'BEGIN{assertion=10}{if(assertion < 3){print "    " $0; assertion++};if ($0 ~/Assertion/){print "    " $0;assertion=1}}END{}' $UE_LOG >> ./test_simulator_results.html
+                fi
+                echo "        </pre></td>" >> ./test_simulator_results.html
+                echo "      </tr>" >> ./test_simulator_results.html
+            fi
+            PING_CASE=$ARCHIVES_LOC/${TMODE}_${BW}MHz_ping_ue.txt
+            if [ -f $PING_CASE ]
+            then
+                echo "      <tr>" >> ./test_simulator_results.html
+                NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"`
+                echo "        <td>$NAME</td>" >> ./test_simulator_results.html
+                CMD=`egrep "COMMAND IS" $PING_CASE | sed -e "s#COMMAND IS: ##"`
+                echo "        <td>$CMD</td>" >> ./test_simulator_results.html
+                FILE_COMPLETE=`egrep -c "ping statistics" $PING_CASE`
+                if [ $FILE_COMPLETE -eq 0 ]
+                then
+                    echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                    echo "        <td>N/A</td>" >> ./test_simulator_results.html
+                else
+                    NB_TR_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s# packets transmitted.*##"`
+                    NB_RC_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*packets transmitted, ##" -e "s# received,.*##"`
+                    if [ $NB_TR_PACKETS -eq $NB_RC_PACKETS ]
+                    then
+                        echo "        <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
+                    else
+                        echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                    fi
+                    echo "        <td>" >> ./test_simulator_results.html
+                    echo "            <pre>" >> ./test_simulator_results.html
+                    STATS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*received, ##" -e "s#, time.*##" -e "s# packet loss##"`
+                    echo "Packet Loss : $STATS" >> ./test_simulator_results.html
+                    RTTMIN=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[1] " " $5}'`
+                    echo "RTT Minimal : $RTTMIN" >> ./test_simulator_results.html
+                    RTTAVG=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[2] " " $5}'`
+                    echo "RTT Average : $RTTAVG" >> ./test_simulator_results.html
+                    RTTMAX=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[3] " " $5}'`
+                    echo "RTT Maximal : $RTTMAX" >> ./test_simulator_results.html
+                    echo "            </pre>" >> ./test_simulator_results.html
+                    echo "        </td>" >> ./test_simulator_results.html
+                fi
+                echo "      </tr>" >> ./test_simulator_results.html
+            fi
+    
+            if [ -f $ARCHIVES_LOC/${TMODE}_${BW}*iperf*dl*client*txt ]
+            then
+                IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}*iperf*client*txt`
+            else
+                echo "There are no iperf files"
+                IPERF_TESTS=""
+            fi
+            for IPERF_CASE in $IPERF_TESTS
+            do
+                echo "      <tr>" >> ./test_simulator_results.html
+                NAME=`echo $IPERF_CASE | sed -e "s#$ARCHIVES_LOC/##"`
+                echo "        <td>$NAME</td>" >> ./test_simulator_results.html
+                CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"`
+                echo "        <td>$CMD</td>" >> ./test_simulator_results.html
+                REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"`
+                if [[ $REQ_BITRATE =~ .*K.* ]]
+                then
+                    REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#K##"`
+                    FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000.0" | bc -l`
+                fi
+                if [[ $REQ_BITRATE =~ .*M.* ]]
+                then
+                    REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#M##"`
+                    FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000.0" | bc -l`
+                fi
+                if [[ $REQ_BITRATE =~ .*G.* ]]
+                then
+                    REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"`
+                    FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l`
+                fi
+                FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE`
+                if [ $FILE_COMPLETE -eq 0 ]
+                then
+                    echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                    SERVER_FILE=`echo $IPERF_CASE | sed -e "s#client#server#"`
+                    FLOAT_EFF_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; printf "%.0f", br}'`
+                    EFFECTIVE_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; if(br>1000000){printf "%.2f MBits/sec", br/1000000}}'`
+                    PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
+                    JITTER=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*/sec *##" -e "s# *ms.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{jitter=s/n; printf "%.3f ms", jitter}'`
+                    PACKETLOSS_NOSIGN=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*(##" -e "s#%.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{per=s/n; printf "%.1f", per}'`
+                    PACKETLOSS=`echo "${PACKETLOSS_NOSIGN}%"`
+                else
+                    EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
+                    if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]]
+                    then
+                        EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Kbits/sec.*##"`
+                        FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000" | bc -l`
+                    fi
+                    if [[ $EFFECTIVE_BITRATE =~ .*Mbits/sec.* ]]
+                    then
+                        EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Mbits/sec.*##"`
+                        FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000" | bc -l`
+                    fi
+                    if [[ $EFFECTIVE_BITRATE =~ .*Gbits/sec.* ]]
+                    then
+                        EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Gbits/sec.*##"`
+                        FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000000" | bc -l`
+                    fi
+                    PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
+                    PERF_INT=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.0f", $0}'`
+                    if [[ $PERF_INT -lt 90 ]]
+                    then
+                        echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                    else
+                        echo "        <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
+                    fi
+                    EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
+                    JITTER=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*Mbits/sec *##" -e "s#ms.*#ms#"`
+                    PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*(##" -e "s#).*##"`
+                fi
+                echo "        <td>" >> ./test_simulator_results.html
+                echo "            <pre>" >> ./test_simulator_results.html
+                echo "Bitrate      : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html
+                echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html
+                echo "Jitter       : $JITTER" >> ./test_simulator_results.html
+                echo "Packet Loss  : $PACKETLOSS" >> ./test_simulator_results.html
+                echo "            </pre>" >> ./test_simulator_results.html
+                echo "        </td>" >> ./test_simulator_results.html
+                echo "      </tr>" >> ./test_simulator_results.html
+            done
+        done
+    done
+
+    echo "   </table>" >> ./test_simulator_results.html
+fi
+
+ARCHIVES_LOC=archives/phy_sim/test
+if [ -d $ARCHIVES_LOC ]
+then
+    echo "   <h3>Physical Simulators Check</h3>" >> ./test_simulator_results.html
+
+    echo "   <table border = \"1\">" >> ./test_simulator_results.html
+    echo "      <tr bgcolor = \"#33CCFF\" >" >> ./test_simulator_results.html
+    echo "        <th>Log File Name</th>" >> ./test_simulator_results.html
+    echo "        <th>Nb Tests</th>" >> ./test_simulator_results.html
+    echo "        <th>Nb Errors</th>" >> ./test_simulator_results.html
+    echo "        <th>Nb Failures</th>" >> ./test_simulator_results.html
+    echo "        <th>Nb Failures</th>" >> ./test_simulator_results.html
+    echo "      </tr>" >> ./test_simulator_results.html
+
+    XML_TESTS=`ls $ARCHIVES_LOC/*xml`
+    for XML_FILE in $XML_TESTS
+    do
+        echo "      <tr>" >> ./test_simulator_results.html
+        NAME=`echo $XML_FILE | sed -e "s#$ARCHIVES_LOC/##"`
+        NB_TESTS=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*tests='##" -e "s#' *time=.*##"`
+        NB_ERRORS=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*errors='##" -e "s#' *failures=.*##"`
+        NB_FAILURES=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*failures='##" -e "s#' *hostname=.*##"`
+        NB_SKIPPED=`egrep "testsuite errors" $XML_FILE | sed -e "s#^.*skipped='##" -e "s#' *tests=.*##"`
+        if [ $NB_ERRORS -eq 0 ] && [ $NB_FAILURES -eq 0 ]
+        then
+            echo "        <td bgcolor = \"green\" >$NAME</td>" >> ./test_simulator_results.html
+        else
+            echo "        <td bgcolor = \"red\" >$NAME</td>" >> ./test_simulator_results.html
+        fi
+        echo "        <td>$NB_TESTS</td>" >> ./test_simulator_results.html
+        echo "        <td>$NB_ERRORS</td>" >> ./test_simulator_results.html
+        echo "        <td>$NB_FAILURES</td>" >> ./test_simulator_results.html
+        echo "        <td>$NB_SKIPPED</td>" >> ./test_simulator_results.html
+        echo "      </tr>" >> ./test_simulator_results.html
+    done
+
+    echo "   </table>" >> ./test_simulator_results.html
+
+    echo "   <h4>Details</h4>" >> ./test_simulator_results.html
+    for XML_FILE in $XML_TESTS
+    do
+        echo "   <table border = \"1\">" >> ./test_simulator_results.html
+        echo "      <tr bgcolor = \"#33CCFF\" >" >> ./test_simulator_results.html
+        echo "        <th>Test Name</th>" >> ./test_simulator_results.html
+        echo "        <th>Description</th>" >> ./test_simulator_results.html
+        echo "        <th>Result</th>" >> ./test_simulator_results.html
+        echo "        <th>Time</th>" >> ./test_simulator_results.html
+        echo "      </tr>" >> ./test_simulator_results.html
+        TESTCASES_LIST=`sed -e "s# #@#g" $XML_FILE | grep testcase`
+        for TESTCASE in $TESTCASES_LIST
+        do
+            echo "      <tr>" >> ./test_simulator_results.html
+            NAME=`echo $TESTCASE | sed -e "s#^.*name='##" -e "s#'@description=.*##" | sed -e "s#@# #g"`
+            echo "          <td>$NAME</td>" >> ./test_simulator_results.html
+            DESC=`echo $TESTCASE | sed -e "s#^.*description='##" -e "s#'@Run_result=.*##" | sed -e "s#@# #g"`
+            echo "          <td>$DESC</td>" >> ./test_simulator_results.html
+            RESULT=`echo $TESTCASE | sed -e "s#^.*RESULT='##" -e "s#'.*##" | sed -e "s#@# #g"`
+            if [[ $RESULT =~ .*PASS.* ]]
+            then
+                echo "          <td bgcolor = \"green\" >$RESULT</td>" >> ./test_simulator_results.html
+            else
+                echo "          <td bgcolor = \"red\" >$RESULT</td>" >> ./test_simulator_results.html
+            fi
+            TIME=`echo $TESTCASE | sed -e "s#^.*time='##" -e "s#'@RESULT=.*##" | sed -e "s#@# #g"`
+            echo "          <td>$TIME</td>" >> ./test_simulator_results.html
+            echo "      </tr>" >> ./test_simulator_results.html
+        done
+        echo "   </table>" >> ./test_simulator_results.html
+    done
+fi
+
+echo "</body>" >> ./test_simulator_results.html
+echo "</html>" >> ./test_simulator_results.html
+
+exit 0

ci-scripts/tcp_iperf_stats.awk

@@ -0,0 +1,14 @@
+BEGIN{max=0;min=10000}
+{
+    if ($0 ~/Mbits/) {
+        split($0,a,"MBytes")
+        split(a[2],b)
+        if (b[1]>max) {
+            max=b[1]
+        }
+        if (b[1]<min) {
+            min=b[1]
+        }
+     }
+}
+END{print "Avg Bitrate : " b[1] " Mbits/sec Max Bitrate : " max " Mbits/sec Min Bitrate : " min " Mbits/sec"}

ci-scripts/template-host.xml

@@ -0,0 +1,27 @@
+<domain type='kvm'>
+  <os>
+    <type>hvm</type>
+    <boot dev='hd'/>
+  </os>
+  <features>
+    <acpi/>
+    <apic/>
+    <pae/>
+  </features>
+  <cpu mode='host-passthrough'>
+  </cpu>
+  <devices>
+    <interface type='network'>
+      <source network='default'/>
+      <model type='virtio'/>
+    </interface>
+    <serial type='pty'>
+      <source path='/dev/pts/3'/>
+      <target port='0'/>
+    </serial>
+    <graphics type='vnc' autoport='yes' listen='127.0.0.1'>
+      <listen type='address' address='127.0.0.1'/>
+    </graphics>
+    <video/>
+  </devices>
+</domain>

ci-scripts/template.xsl

@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?>
+<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
+    <xsl:output method="html" version="4" encoding="UTF-8" indent="no" omit-xml-declaration="yes"/>
+    <!-- main body -->
+    <xsl:template match="/">
+        <html>
+          <body>
+            <h3>TEMPLATE Results Summary</h3>
+            <table border="1">
+              <tr bgcolor="lightcyan">
+                <!--Header only so select first row to get headers-->
+                  <th>Hostname</th>
+                  <th>Nb Tests</th>
+                  <th>Failures</th>
+                  <th>Timestamp</th>
+              </tr>
+              <!--Get all the other rows-->
+              <xsl:for-each select="testsuites/testsuite">
+                <tr>
+                    <td>
+                      <xsl:value-of select="@hostname"/>
+                    </td>
+                    <td>
+                      <xsl:value-of select="@tests"/>
+                    </td>
+                    <td>
+                      <xsl:value-of select="@failures"/>
+                    </td>
+                    <td>
+                      <xsl:value-of select="@timestamp"/>
+                    </td>
+                </tr>
+              </xsl:for-each>
+              </table>
+            <h4>Details</h4>
+            <table border="1">
+              <tr bgcolor="lightcyan">
+                <!--Header only so select first row to get headers-->
+                  <th>Test Name</th>
+                  <th>Result</th>
+                  <th>Time</th>
+                  <th>Description</th>
+              </tr>
+              <!--Get all the other rows-->
+              <xsl:for-each select="testsuites/testsuite/testcase">
+                <tr>
+                    <td>
+                      <xsl:value-of select="@name"/>
+                    </td>
+                    <td>
+                      <xsl:value-of select="@RESULT"/>
+                    </td>
+                    <td>
+                      <xsl:value-of select="@time"/>
+                    </td>
+                    <td>
+                      <xsl:value-of select="@description"/>
+                    </td>
+                </tr>
+              </xsl:for-each>
+              </table>
+          </body>
+        </html>
+    </xsl:template>
+</xsl:stylesheet>

ci-scripts/xml_files/enb_usrp210_band7.xml

@@ -0,0 +1,350 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<TestCaseRequestedList>
+ 010101
+ 050101 060101 070101 040101
+ 030101 040301 040501 040603 040604 040605 040606 040607 040641 040642 040643 040644 040401 040201 030201
+ 030111 040301 040511 040613 040614 040615 040616 040617 040651 040652 040653 040654 040401 040201 030201
+ 030121 040301 040521 040623 040624 040625 040626 040627 040662 040661 040663 040664 040401 040201 030201
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030111">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/10MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030121">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/20MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040511">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040521">
+                <class>Ping</class>
+                <desc>ping (20MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040605">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040606">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040607">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040644">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040613">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040614">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040615">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040616">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040617">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+	<testCase id="040651">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040652">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040653">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040654">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040623">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040624">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040625">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040626">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040627">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+	<testCase id="040661">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/20Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040662">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040663">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040664">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+	<testCase id="050201">
+		<class>Terminate_HSS</class>
+		<desc>Terminate HSS</desc>
+	</testCase>
+
+	<testCase id="060201">
+		<class>Terminate_MME</class>
+		<desc>Terminate MME</desc>
+	</testCase>
+
+	<testCase id="070201">
+		<class>Terminate_SPGW</class>
+		<desc>Terminate SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_usrpB210_band7_50PRB.xml

@@ -0,0 +1,65 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<TestCaseRequestedList>030101 040101 040301 040501 040401 040201 030201</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band1/5MHz/info)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_usrpb210_band40.xml

@@ -0,0 +1,226 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+        <TestCaseRequestedList>
+ 010101
+ 050101 060101 070101 040101
+ 030104 040301 040501 040602 040601 040603 040642 040641 040643 040401 040201 030201
+ 030114 040301 040511 040612 040611 040613 040652 040651 040653 040401 040201 030201
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<!-- 20MHz is not stable enough to be run -->
+	<!--
+ 030124 040301 040521 040622 040621 040623 040662 040661 040663 040401 040201 030201
+	-->
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030104">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band40/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+	
+	<testCase id="030114">
+                <class>Initialize_eNB</class>
+                <desc>Initialize eNB (TDD/Band40/10MHz/info)</desc>
+                <Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+        </testCase>
+
+	<testCase id="030106">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band40/20MHz/info)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040511">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040601">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(balanced)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040602">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(unbalanced)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
+	<testCase id="040611">
+                <class>Iperf</class>
+                <desc>iperf (10MHz - DL/13.5Mbps/UDP)(30 sec)(balanced)</desc>
+                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
+                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+                <iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040612">
+                <class>Iperf</class>
+                <desc>iperf (10MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
+                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
+                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+                <iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040613">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/13.5Mbps/UDP)(30 sec)(unbalanced)</desc>
+		<iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(balanced)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(unbalanced)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040651">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/2Mbps/UDP)(30 sec)(balanced)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040652">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040653">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/2Mbps/UDP)(30 sec)(unbalanced)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+	</testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+        <testCase id="050201">
+                <class>Terminate_HSS</class>
+                <desc>Terminate HSS</desc>
+        </testCase>
+
+        <testCase id="060201">
+                <class>Terminate_MME</class>
+                <desc>Terminate MME</desc>
+        </testCase>
+
+        <testCase id="070201">
+                <class>Terminate_SPGW</class>
+                <desc>Terminate SPGW</desc>
+        </testCase>
+
+</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band40.xml

@@ -0,0 +1,219 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<!-- Only 5MHz is tested since neither 10MHz nor 20MHz work in this configuration -->
+	<!-- Also no UL iperf in 5MHz (040642) -->
+        <TestCaseRequestedList>
+ 010101
+ 050101 060101 070101 040101
+ 030104 030105 040301 040501 040602 040401 040201 030201 030202
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<!--
+ 030104 030105 040301 040501 040602 040642 040401 040201 030201 030202
+ 030114 030115 040301 040511 040612 040652 040401 040201 030201 030202
+ 030124 030125 040301 040521 040622 040662 040401 040201 030201 030202
+	-->
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
+		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030104">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (TDD/Band40)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+	
+	<testCase id="030105">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (TDD/Band40/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+	
+	<testCase id="030114">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (TDD/Band40)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+	
+	<testCase id="030115">
+                <class>Initialize_eNB</class>
+                <desc>Initialize RCC (TDD/Band40/10MHz/info)</desc>
+                <Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+        </testCase>
+
+	<testCase id="030124">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (TDD/Band40)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+	
+	<testCase id="030125">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (TDD/Band40/20MHz/info)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RCC</desc>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030202">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RRU</desc>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040511">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040521">
+                <class>Ping</class>
+                <desc>ping (20MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040602">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040612">
+                <class>Iperf</class>
+                <desc>iperf (10MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
+                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
+                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+                <iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040622">
+                <class>Iperf</class>
+                <desc>iperf (20MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
+                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
+                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+                <iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040652">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040662">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+        <testCase id="050201">
+                <class>Terminate_HSS</class>
+                <desc>Terminate HSS</desc>
+        </testCase>
+
+        <testCase id="060201">
+                <class>Terminate_MME</class>
+                <desc>Terminate MME</desc>
+        </testCase>
+
+        <testCase id="070201">
+                <class>Terminate_SPGW</class>
+                <desc>Terminate SPGW</desc>
+        </testCase>
+
+</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7.xml

@@ -0,0 +1,217 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<!-- Only 5MHz is tested since neither 10MHz nor 20MHz work in this configuration -->
+	<TestCaseRequestedList>
+ 010101
+ 050101 060101 070101 040101
+ 030101 030102 040301 040501 040604 040642 040401 040201 030201 030202
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<!--
+ 030111 030112 040301 040511 040614 040652 040401 040201 030201 030202
+ 030121 030122 040301 040521 040624 040662 040401 040201 030201 030202
+	-->
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
+		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (FDD/Band7)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030102">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030111">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (FDD/Band7)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030112">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (FDD/Band7/10MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030121">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (FDD/Band7)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030122">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (FDD/Band7/20MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RCC</desc>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030202">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RRU</desc>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040511">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040614">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/32Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 32M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040652">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040521">
+                <class>Ping</class>
+                <desc>ping (20MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040624">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040662">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+	<testCase id="050201">
+		<class>Terminate_HSS</class>
+		<desc>Terminate HSS</desc>
+	</testCase>
+
+	<testCase id="060201">
+		<class>Terminate_MME</class>
+		<desc>Terminate MME</desc>
+	</testCase>
+
+	<testCase id="070201">
+		<class>Terminate_SPGW</class>
+		<desc>Terminate SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/test_case_list_template.xml

@@ -0,0 +1,142 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<TestCaseRequestedList>010101 050101 060101 070101 030101 030201 050201 070201 060201</TestCaseRequestedList>
+	<TestCaseExclusionList>010102 030102 030103 030104 030105 030106</TestCaseExclusionList>
+
+	<!-- eNB class command references -->
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="010102">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP)</desc>
+		<Build_eNB_args>-w BLADERF -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band1/5MHz/info)</desc>
+		<Initialize_eNB_args>-O enb.band7.tm1.50PRB.usrpb210.conf</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030102">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band1/10MHz/info)</desc>
+		<Initialize_eNB_args>-O 10M.band1.FDD.info.conf</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030103">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band1/20MHz/info)</desc>
+		<Initialize_eNB_args>-O 20M.band1.FDD.info.conf</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030104">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band38/5MHz/info)</desc>
+		<Initialize_eNB_args>-O 5M.band38.TDD.info.conf</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030105">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band38/10MHz/info)</desc>
+		<Initialize_eNB_args>-O 10M.band38.TDD.info.conf</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030106">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band38/20MHz/info)</desc>
+		<Initialize_eNB_args>-O 20M.band38.TDD.info.conf</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<!-- UE class command references -->
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="040301">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="040401">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+
+	<testCase id="040701">
+		<class>Reboot_UE</class>
+		<desc>Reboot UE</desc>
+	</testCase>
+
+	<!-- EPC class command references -->
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+        <testCase id="050201">
+		<class>Terminate_HSS</class>
+		<desc>Terminate HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="060201">
+		<class>Terminate_MME</class>
+		<desc>Terminate MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+	<testCase id="070201">
+		<class>Terminate_SPGW</class>
+		<desc>Terminate SPGW</desc>
+	</testCase>
+
+</testCaseList>

cmake_targets/at_commands/CMakeLists.txt

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/core.py

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/log.py

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/openair.py

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/run_compilation_autotests.bash

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/run_exec_autotests.bash

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *
@@ -175,10 +175,10 @@ function test_compile() {
     fi
     if [ "$result" == "1" ]; then
       echo_success "$test_case_name.${tags} PASSED"
-      xUnit_success "compilation" "$test_case_name.$tags" "PASS" "$result_string" "$xmlfile_testcase"
+      xUnit_success "compilation" "$test_case_name.$tags" "PASS" "$result_string" "$xmlfile_testcase" ""
     else             
       echo_error "$test_case_name.${tags} FAILED"
-      xUnit_fail "compilation" "$test_case_name.$tags" "FAIL" "$result_string" "$xmlfile_testcase"
+      xUnit_fail "compilation" "$test_case_name.$tags" "FAIL" "$result_string" "$xmlfile_testcase" ""
     fi
 }
 
@@ -200,6 +200,8 @@ function test_compile() {
 #\param $14 -> tags to help identify the test case for readability in output xml file
 #\param $15 => password for the user to run certain commands as sudo
 #\param $16 => test config file params to be modified
+#\param $17 => bypass flag if main_exec if available
+#\param $18 -> desc to help identify the test case for readability in output xml file
 
 function test_compile_and_run() {
     xUnit_start
@@ -221,6 +223,8 @@ function test_compile_and_run() {
     tags=${14}
     mypassword=${15}
     test_config_file=${16}
+    bypass_compile=${17}
+    desc=${18}
 
     build_dir=$tdir/$1/build
     #exec_file=$build_dir/$6
@@ -231,8 +235,6 @@ function test_compile_and_run() {
     rm -fr $log_dir
     mkdir -p $log_dir
     
-    rm -fr $OPENAIR_DIR/cmake_targets/log
-
     echo "" > $temp_exec_log
     echo "" > $log_file
     #echo "log_dir = $log_dir"
@@ -243,6 +245,7 @@ function test_compile_and_run() {
     #echo "pre_exec_file = $pre_exec_file"
     #echo "nruns = $nruns"
     echo "class = $class"
+    #echo "desc = $desc"
     
     #compile_prog_array=()
     #read -a compile_prog_array <<<"$compile_prog"
@@ -253,11 +256,19 @@ function test_compile_and_run() {
   
     tags_array=()
     read -a tags_array <<<"$tags"
+    desc_array=()
+    readarray -t desc_array <<<"$desc"
     
     main_exec_args_array=()
     readarray -t main_exec_args_array <<< "$exec_args"
     
-    
+    REAL_MAIN_EXEC=`eval "echo $main_exec"`
+    if [ "$bypass_compile" == "1" ] && [ -f $REAL_MAIN_EXEC ]
+    then
+        echo "Bypassing compilation for $main_exec"
+    else
+        rm -fr $OPENAIR_DIR/cmake_targets/log
+
     #for search_expr in "${compile_prog_array[@]}"  
     #do
        echo "Compiling test case $test_case_name Log file = $log_file"  
@@ -283,6 +294,7 @@ function test_compile_and_run() {
        }>> $log_file 2>&1
        echo "</COMPILATION LOG>" >> $log_file 2>&1
     #done
+    fi
     
     #process the test case if it is that of execution
     if [ "$class" == "execution" ]; then
@@ -291,6 +303,7 @@ function test_compile_and_run() {
       do
         global_result=1
         result_string=""
+        PROPER_DESC=`echo ${desc_array[$tags_array_index]} | sed -e "s@^.*lsim.*est case.*(Test@Test@" -e "s@^ *(@@" -e "s/),$//"`
         
        for (( run_index=1; run_index <= $nruns; run_index++ ))
         do
@@ -359,16 +372,16 @@ function test_compile_and_run() {
 
        if [ "$result_string" == "" ]; then
            echo_error "execution $test_case_name.$compile_prog.${tags_array[$tags_array_index]} Run_Result = \"$result_string\"  Result = FAIL"
-	   xUnit_fail "execution" "$test_case_name.${tags_array[$tags_array_index]}" "FAIL" "$result_string" "$xmlfile_testcase"
+	   xUnit_fail "execution" "$test_case_name.${tags_array[$tags_array_index]}" "FAIL" "$result_string" "$xmlfile_testcase" "$PROPER_DESC"
        else
         if [ "$global_result" == "0" ]; then
            echo_error "execution $test_case_name.${tags_array[$tags_array_index]} Run_Result = \"$result_string\" Result =  FAIL"
-           xUnit_fail "execution" "$test_case_name.${tags_array[$tags_array_index]}" "FAIL" "$result_string" "$xmlfile_testcase"
+           xUnit_fail "execution" "$test_case_name.${tags_array[$tags_array_index]}" "FAIL" "$result_string" "$xmlfile_testcase" "$PROPER_DESC"
         fi
 
         if [ "$global_result" == "1" ]; then
             echo_success "execution $test_case_name.${tags_array[$tags_array_index]} Run_Result = \"$result_string\"  Result = PASS "
-	    xUnit_success "execution" "$test_case_name.${tags_array[$tags_array_index]}" "PASS" "$result_string"   "$xmlfile_testcase"     
+	    xUnit_success "execution" "$test_case_name.${tags_array[$tags_array_index]}" "PASS" "$result_string"   "$xmlfile_testcase"  "$PROPER_DESC"
         fi  
        fi
 
@@ -393,10 +406,18 @@ Options
    Run test cases in a group. For example, ./run_exec_autotests "0101* 010102"
 -p
    Use password for logging
+-np | --no-password
+   No need for a password
+-q | --quiet
+   Quiet  mode;  eliminate  informational  messages and comment prompts.
+-b | --bypass-compile
+   Bypass compilation of main-exec if already present
 '
 }
 
 function main () {
+QUIET=0
+BYPASS_COMPILE=0
 RUN_GROUP=0
 SET_PASSWORD=0
 passwd=""
@@ -419,6 +440,16 @@ until [ -z "$1" ]
             SET_PASSWORD=1
             passwd=$2
             shift 2;;
+        -np|--no-password)
+            SET_PASSWORD=1
+            shift ;;
+        -q|--quiet)
+            QUIET=1
+            shift ;;
+        -b|--bypass-compile)
+            BYPASS_COMPILE=1
+            echo "bypass option ON"
+            shift ;;
         -h | --help)
             print_help
             exit 1;;
@@ -449,15 +480,15 @@ xml_conf="$OPENAIR_DIR/cmake_targets/autotests/test_case_list.xml"
 
 test_case_list=`xmlstarlet sel -T -t -m /testCaseList/testCase -s A:N:- "@id" -v "@id" -n $xml_conf`
 test_case_excl_list=`xmlstarlet sel -t -v "/testCaseList/TestCaseExclusionList" $xml_conf`
-echo "Test Case Exclusion List = $test_case_excl_list "
+if [ $QUIET -eq 0 ]; then echo "Test Case Exclusion List = $test_case_excl_list "; fi
 
 test_case_excl_list=`sed "s/\+/\*/g" <<< "$test_case_excl_list" ` # Replace + with * for bash string substituion
 
 read -a test_case_excl_array <<< "$test_case_excl_list"
 
-echo "test_case_list = $test_case_list"
+if [ $QUIET -eq 0 ]; then echo "test_case_list = $test_case_list"; fi
 
-echo "Test Case Exclusion List = $test_case_excl_list \n"
+if [ $QUIET -eq 0 ]; then echo "Test Case Exclusion List = $test_case_excl_list \n"; fi
 
 readarray -t test_case_array <<<"$test_case_list"
 
@@ -484,7 +515,7 @@ for search_expr in "${test_case_array[@]}"
        do  
           if [[ $search_expr == $search_excl ]];then
              flag_run_test_case=0
-             echo_info "Test case $search_expr match found in test case excl group. Will skip the test case for execution..."
+             if [ $QUIET -eq 0 ]; then echo_info "Test case $search_expr match found in test case excl group. Will skip the test case for execution..."; fi
              break
           fi
        done
@@ -533,8 +564,8 @@ for search_expr in "${test_case_array[@]}"
 
     search_array_true=()
 
-    IFS=\"                  #set the shell's field separator
-    set -f                  #don't try to glob 
+    IFS=\"                  #set the shell field separator
+    set -f                  #dont try to glob 
     #set -- $search_expr_true             #split on $IFS
     for i in $search_expr_true
       do echo "i = $i"
@@ -548,10 +579,10 @@ for search_expr in "${test_case_array[@]}"
     #echo "arg1 = ${search_array_true[0]}"
     #echo " arg2 = ${search_array_true[1]}"
     if [ "$class" == "compilation" ]; then
-        test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
+        test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$desc"
     elif  [ "$class" == "execution" ]; then
         echo \'passwd\' | $SUDO killall -q oaisim_nos1
-        test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file"
+        test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file" "$BYPASS_COMPILE" "$desc"
     else
         echo "Unexpected class of test case...Skipping the test case $name ...."
     fi

cmake_targets/autotests/run_exec_lte-softmodem_tests.py

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/test_case_list.xml

@@ -955,21 +955,21 @@
       <compile_prog_args> --phy_simulators  -c </compile_prog_args>
       <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
       <pre_exec_args></pre_exec_args>
-      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim</main_exec>
-      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70
-                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70
-                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70
-                       -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70
-                       -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30
-                       -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30
-                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70
-                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70
-                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70
-                       -m26 -gF -s17.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -O70
-                       -m26 -gF -s17.3 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1600 -O70
-                       -m26 -gF -s16.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1899 -O70
-		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70
-                       -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70</main_exec_args>
+      <main_exec> $OPENAIR_DIR/targets/bin/dlsim.Rel14</main_exec>
+      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
+                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O60
+                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
+                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c2 -z2 -O60
+                       -m15 -gG -s1.4 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O25
+                       -m15 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c2 -z2 -O25
+                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O60
+                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O60
+                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
+                       -m26 -gF -s17.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -O60
+                       -m26 -gF -s17.3 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1600 -O60
+                       -m26 -gF -s16.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1899 -O60
+		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O60
+                       -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O60</main_exec_args>
       <tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b</tags>
       <search_expr_true>"passed"</search_expr_true>
       <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
@@ -989,13 +989,13 @@
       <compile_prog_args> --phy_simulators  -c </compile_prog_args>
       <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
       <pre_exec_args></pre_exec_args>
-      <main_exec> $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim</main_exec>
-      <main_exec_args> -B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
-                       -B25 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
-                        -B50 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L 
-                       -B50 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
-                        -B100 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
-                       -B100 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L</main_exec_args>
+      <main_exec> $OPENAIR_DIR/targets/bin/ulsim.Rel14</main_exec>
+      <main_exec_args> -BnbRBs=25 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
+                       -BnbRBs=25 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
+                        -BnbRBs=50 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70  
+                       -BnbRBs=50 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
+                        -BnbRBs=100 -mcs=5 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=6 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 
+                       -BnbRBs=100 -mcs=16 -yN_rx=1 -gchannel=N -xTransmission=1 -snr=12 -wsnrInterrupt=1.0 -e_snr_step=.1 -P -nb_frame=500 -Operf=70 </main_exec_args>
      <tags>ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6</tags>
       <search_expr_true>"passed"</search_expr_true>
       <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>

cmake_targets/autotests/tools/configure_cots_bandrich_ue.py

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/configure_usrpb210.py

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/find_usb_path.bash

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/free_mem.bash

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/git-retry.sh

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/iperf3_script

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/iperf3_script_phone

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/iperf_script

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/iperf_script_phone

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/lib_autotest.py

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/run_gdb

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/tools/search_repl.py

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/autotests/v2/actions/3276.txt

@@ -0,0 +1,13 @@
+When running lsusb, if you have:
+
+    Bus 001 Device 002: ID 12d1:14fe Huawei Technologies Co., Ltd. Modem (Mass Storage Mode)
+
+You need to run:
+
+    usb_modeswitch -v 12d1 -p 14fe -M '55534243123456780000000000000011062000000100000000000000000000'
+
+After what, running lsusb should give:
+
+    Bus 001 Device 004: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard
+
+Values of 'Bus' and 'Device' may differ of course.

cmake_targets/autotests/v2/actions/bandrich.txt

@@ -13,6 +13,16 @@ containing lines:
     SUBSYSTEM=="tty", ENV{ID_VENDOR_ID}=="1a8d", ENV{ID_MODEL_ID}=="100d", ENV{ID_SERIAL_SHORT}=="357473040068155", ENV{ID_USB_INTERFACE_NUM}=="00", SYMLINK+="bandrich.data", MODE="0666"
     SUBSYSTEM=="tty", ENV{ID_VENDOR_ID}=="1a8d", ENV{ID_MODEL_ID}=="100d", ENV{ID_SERIAL_SHORT}=="357473040068155", ENV{ID_USB_INTERFACE_NUM}=="02", SYMLINK+="bandrich.control", MODE="0666"
 
+To avoid NetworkManager to play with the bandrich, add also the line:
+
+    ENV{ID_VENDOR_ID}=="1a8d", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+Maybe also add; , ENV{ID_MM_DEVICE_IGNORE}="1"
+to the two other lines.
+
+Then run: udevadm control --reload-rules
+And:      service network-manager restart
+
 Change vendor_id/model_id/serial/interface num to match yours.
 Use lsusb -v to find values.
 

cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.10MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 0;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
+        pucch_n1_AN             			      = 0;
         pdsch_referenceSignalPower 			      = -24;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth6";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.82/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth6";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.82/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.82/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :

cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.20MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 0;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
+        pucch_n1_AN             			      = 0;
         pdsch_referenceSignalPower 			      = -24;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth6";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.82/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth6";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.82/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.82/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :

cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.5MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 0;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
+        pucch_n1_AN             			      = 0;
         pdsch_referenceSignalPower 			      = -24;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth6";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.82/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth6";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.82/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.82/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :

cmake_targets/autotests/v2/config/enb.band7.tm1.usrpb210.fdd.10MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 0;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
+        pucch_n1_AN             			      = 0;
         pdsch_referenceSignalPower 			      = -24;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.19/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.19/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.19/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :

cmake_targets/autotests/v2/config/enb.band7.tm1.usrpb210.fdd.20MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 0;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
+        pucch_n1_AN             			      = 0;
         pdsch_referenceSignalPower 			      = -24;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.19/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.19/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.19/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :

cmake_targets/autotests/v2/config/enb.band7.tm1.usrpb210.fdd.5MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
         pucch_delta_shift       			      = 1;
         pucch_nRB_CQI           			      = 0;
         pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 32;
+        pucch_n1_AN             			      = 0;
         pdsch_referenceSignalPower 			      = -24;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.19/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.19/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.19/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :

cmake_targets/autotests/v2/config/rcc.band7.tm1.if4p5.10MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
       pucch_delta_shift       			      = 1;
       pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
+      pucch_n1_AN             			      = 0;
       pdsch_referenceSignalPower 			      = -29;
       pdsch_p_b                  			      = 0;
       pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.18/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.18/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.18/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     rrh_gw_config = (

cmake_targets/autotests/v2/config/rcc.band7.tm1.if4p5.20MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
       pucch_delta_shift       			      = 1;
       pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
+      pucch_n1_AN             			      = 0;
       pdsch_referenceSignalPower 			      = -29;
       pdsch_p_b                  			      = 0;
       pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.18/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.18/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.18/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     rrh_gw_config = (

cmake_targets/autotests/v2/config/rcc.band7.tm1.if4p5.5MHz.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
       pucch_delta_shift       			      = 1;
       pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
+      pucch_n1_AN             			      = 0;
       pdsch_referenceSignalPower 			      = -29;
       pdsch_p_b                  			      = 0;
       pusch_n_SB                 			      = 1;
@@ -146,12 +143,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.18/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.18/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.18/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     rrh_gw_config = (

cmake_targets/autotests/v2/config/rru.band7.tm1.if4p5.10MHz.udp.usrpb210.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
       pucch_delta_shift       			      = 1;
       pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
+      pucch_n1_AN             			      = 0;
       pdsch_referenceSignalPower 			      = -29;
       pdsch_p_b                  			      = 0;
       pusch_n_SB                 			      = 1;
@@ -148,12 +145,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth3";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.215/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth3";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.215/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.215/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     rrh_gw_config = (

cmake_targets/autotests/v2/config/rru.band7.tm1.if4p5.20MHz.udp.usrpb210.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
       pucch_delta_shift       			      = 1;
       pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
+      pucch_n1_AN             			      = 0;
       pdsch_referenceSignalPower 			      = -29;
       pdsch_p_b                  			      = 0;
       pusch_n_SB                 			      = 1;
@@ -148,12 +145,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth3";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.215/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth3";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.215/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.215/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     rrh_gw_config = (

cmake_targets/autotests/v2/config/rru.band7.tm1.if4p5.5MHz.udp.usrpb210.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,14 +10,11 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    mobile_country_code =  "208";
-
-    mobile_network_code =  "92";
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
 
        ////////// Physical parameters:
 
@@ -49,7 +46,7 @@ eNBs =
       pucch_delta_shift       			      = 1;
       pucch_nRB_CQI           			      = 0;
       pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
+      pucch_n1_AN             			      = 0;
       pdsch_referenceSignalPower 			      = -29;
       pdsch_p_b                  			      = 0;
       pusch_n_SB                 			      = 1;
@@ -148,12 +145,14 @@ eNBs =
 
     NETWORK_INTERFACES :
     {
-
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth3";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.215/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth3";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.215/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.215/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     rrh_gw_config = (

cmake_targets/autotests/v2/connection.py

@@ -13,7 +13,7 @@ class connection:
         try:
             (pid, fd) = os.forkpty()
         except BaseException, e:
-            log("ERROR: forkpty for '" + description + "': " + e)
+            log("ERROR: forkpty for '" + description + "': " + str(e))
             (pid, fd) = (-1, -1)
 
         if pid == -1:
@@ -26,7 +26,7 @@ class connection:
                 os.execvp('sshpass', ['sshpass', '-p', password,
                           'ssh', user + '@' + host])
             except BaseException, e:
-                log("ERROR: execvp for '" + description + "': " + e)
+                log("ERROR: execvp for '" + description + "': " + str(e))
             log("ERROR: execvp failed for '" + description + "'")
             os._exit(1)
 

cmake_targets/build_oai

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *
@@ -40,9 +40,9 @@ set_openair_env
 gen_nvram_path=$OPENAIR_DIR/targets/bin
 conf_nvram_path=$OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf
 
-MSC_GEN="False"
+MSC_GEN=0
 XFORMS="True"
-FLEXRAN_AGENT_SB_IF="True"
+UE_EXPANSION="False"
 PRINT_STATS="False"
 VCD_TIMING="False"
 DEADLINE_SCHEDULER_FLAG_USER="False"
@@ -58,7 +58,7 @@ CFLAGS_PROCESSOR_USER=""
 RUN_GROUP=0
 TEST_CASE_GROUP=""
 BUILD_DOXYGEN=0
-T_TRACER="False"
+T_TRACER="True"
 DISABLE_HARDWARE_DEPENDENCY="False"
 CMAKE_BUILD_TYPE=""
 CMAKE_CMD="$CMAKE"
@@ -66,7 +66,10 @@ UE_AUTOTEST_TRACE="False"
 UE_DEBUG_TRACE="False"
 UE_TIMING_TRACE="False"
 DISABLE_LOG_X="False"
+USRP_REC_PLAY="False"
 BUILD_ECLIPSE=0
+UE_NAS_USE_TUN="False"
+BASIC_SIMULATOR=0
 trap handle_ctrl_c INT
 
 function print_help() {
@@ -99,10 +102,6 @@ Options
    Specify conf_nvram_path (default \"$conf_nvram_path\")
 --UE-gen-nvram [output path]
    Specify gen_nvram_path (default \"$gen_nvram_path\")
---RRH
-   Makes the RRH
--a | --agent
-   Enables agent for software-defined control of the eNB
 -r | --3gpp-release
    default is Rel14,
    Rel8 limits the implementation to 3GPP Release 8 version
@@ -113,8 +112,6 @@ Options
 -t | --transport protocol
    ETHERNET , None
    Adds this trasport protocol support in compilation
---oaisim
-   Makes the oaisim simulator. Hardware will be defaulted to \"None\".
 --phy_simulators
    Makes the unitary tests Layer 1 simulators
 --core_simulators
@@ -126,12 +123,12 @@ Options
 -V | --vcd
    Adds a debgging facility to the binary files: GUI with major internal synchronization events
 -x | --xforms
-   Adds a software oscilloscope feature to the produced binaries. If oaisim, then enable PRINT_STATS.
+   Adds a software oscilloscope feature to the produced binaries. 
 --install-system-files
    Install OpenArInterface required files in Linux system
    (will ask root password)
 --noS1 
-   Compiles oaisim or lte-softmodem without S1 interface, using direct link to IP instead
+   Compiles lte-softmodem without S1 interface, using direct link to IP instead
 --verbose-compile
    Shows detailed compilation instructions in makefile
 --cflags_processor
@@ -144,8 +141,8 @@ Options
    Enable deadline scheduler of Linux kernel (>=3.14.x). 
 --disable-cpu-affinity
    Disables CPU Affinity between UHD/TX/RX Threads (Valid only when deadline scheduler is disabled). By defaulT, CPU Affinity is enabled when not using deadline scheduler. It is enabled only with >2 CPUs. For eNB, CPU_0-> Device library (UHD), CPU_1->TX Threads, CPU_2...CPU_MAX->Rx Threads. For UE, CPU_0->Device Library(UHD), CPU_1..CPU_MAX -> All the UE threads
---T-tracer
-   Enables the T tracer.
+--disable-T-Tracer
+   Disables the T tracer.
 --disable-hardware-dependency
    Disable HW dependency during installation
 --ue-autotest-trace
@@ -158,12 +155,20 @@ Options
    Disable all LOG_* macros
 --build-eclipse
    Build eclipse project files. Paths are auto corrected by fixprj.sh
+--build-telnet
+   Build telnet server, specify --telnetsrv on command line to start it (eNB only)
+--build-msc
+   Build MSC tracing utility, specify --msc on command line to start it (eNB and UE)
+--usrp-recplay
+   Build for I/Q record-playback modes
+--ue-nas-use-tun
+   Use TUN devices for the UEs instead of ue_ip.ko
+--basic-simulator
+   Generates a basic [1 UE + 1 eNB + no channel] simulator.
+   See targets/ARCH/tcp_bridge/README.tcp_bridge_oai for documentation.
 Usage (first build):
- oaisim (eNB + UE): ./build_oai -I  --oaisim -x --install-system-files
- Eurecom EXMIMO + COTS UE : ./build_oai -I  --eNB -x --install-system-files
  NI/ETTUS B201  + COTS UE : ./build_oai -I  --eNB -x --install-system-files -w USRP
 Usage (Regular):
- oaisim : ./build_oai --oaisim -x 
  Eurecom EXMIMO + OAI ENB : ./build_oai --eNB -x 
  NI/ETTUS B201  + OAI ENB : ./build_oai --eNB -x -w USRP"
 }
@@ -196,30 +201,29 @@ function main() {
             GDB=1
             CMAKE_BUILD_TYPE="Debug"
             echo_info "Will Compile with gdb symbols and disable compiler optimization"
-            CMAKE_CMD="$CMAKE_CMD -DCMAKE_BUILD_TYPE=Debug"
+            CMAKE_CMD="$CMAKE_CMD -DCMAKE_BUILD_TYPE=Debug --trace-expand"
             shift;;
        --eNB)
             eNB=1
             echo_info "Will compile eNB"
             shift;;
        -a | --agent)
-	    FLEXRAN_AGENT=1
-	    echo_info "Will compile eNB with agent support"
+	    echo_info "FlexRAN support is always compiled into the eNB"
 	    shift;;
        --UE)
             UE=1
             echo_info "Will compile UE"
             shift;;
+       --mu)
+            UE_EXPANSION="True"
+            echo_info "Will compile with UE_EXPANSION"
+            shift;;
        --UE-conf-nvram)
-            conf_nvram_path=$(readlink -f "$1")
+            conf_nvram_path=$(readlink -f $2)
             shift 2;;
         --UE-gen-nvram)
             gen_nvram_path=$(readlink -f $2)
             shift 2;;
-       --RRH)
-            RRH=1
-            echo_info "Will compile RRH"
-            shift;;
        -r | --3gpp-release)
             REL=$2
             echo_info "Setting release to: $REL"
@@ -250,10 +254,6 @@ function main() {
 		echo_info "Setting transport protocol to: $TP"		
 	    fi
             shift 2;;
-	--oaisim)
-            oaisim=1
-            echo_info "Will compile oaisim and drivers nasmesh, ..."
-            shift;;
        --phy_simulators)
             SIMUS_PHY=1
             echo_info "Will compile dlsim, ulsim, ..."
@@ -313,9 +313,9 @@ function main() {
             CPU_AFFINITY_FLAG_USER="False"
             echo_info "Disabling CPU Affinity (only valid when not using deadline scheduler)"
             shift 1;;
-       --T-tracer)
-            T_TRACER="True"
-            echo_info "Enabling the T tracer"
+       --disable-T-Tracer)
+            T_TRACER="False"
+            echo_info "Disabling the T tracer"
             shift 1;;
        --disable-hardware-dependency)
             echo_info "Disabling hardware dependency for compiling software"
@@ -345,7 +345,27 @@ function main() {
             BUILD_ECLIPSE=1
             CMAKE_CMD="$CMAKE_CMD"' -DCMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT=TRUE -G"Eclipse CDT4 - Unix Makefiles"'
             echo_info "Enabling build eclipse project support"
-            shift 1;;			
+            shift 1;;
+       --build-telnetsrv)
+            BUILD_TELNETSRV=1
+            echo_info "Build embedded telnet server"
+            shift ;;
+       --build-msc)
+            MSC_GEN=1
+            echo_info "Build MSC tracing utility"
+            shift ;;			
+        --usrp-recplay)
+            USRP_REC_PLAY="True"
+            echo_info "Enabling USRP record playback mode"
+            shift 1;;
+        --ue-nas-use-tun)
+            UE_NAS_USE_TUN="True"
+            echo_info "Enabling UE NAS TUN device usage instead of ue_ip.ko"
+            shift 1;;
+        --basic-simulator)
+            BASIC_SIMULATOR=1
+            echo_info "Compiling the basic simulator"
+            shift 1;;
         -h | --help)
             print_help
             exit 1;;
@@ -358,9 +378,13 @@ function main() {
   
   CMAKE_CMD="$CMAKE_CMD .."
   echo_info "CMAKE_CMD=$CMAKE_CMD"
-  
+  if [ "$eNB" = "1" ] && [ "$UE" = "1" ]; then
+    echo_error "Cannot build UE and eNB on one build_oai execution"
+    echo_error "use 2 build_oai invocations"
+    exit
+  fi  
   #########################################################
-  # check validity of HW and TP parameters for RRH and eNB
+  # check validity of HW and TP parameters for eNB
   #########################################################
   # to be discussed
   
@@ -376,15 +400,6 @@ function main() {
       fi
   fi
   
-  if [ "$RRH" = "1" ] ; then
-      if [ "$TP" = "None" ] ; then
-	  echo_fatal "A transport protocol (e.g. -t ETHERNET) must be defined!"
-      fi
-      if [ "$HW" = "None" ] ; then
-	  echo_info "No radio head has been selected (HW set to $HW)"	
-      fi
-  fi
-
   echo_info "RF HW set to $HW" 
   #Now we set flags to enable deadline scheduler settings
   #By default: USRP: disable, 
@@ -469,11 +484,9 @@ function main() {
         flash_firmware_bladerf
       fi
     fi
-    if [ "$FLEXRAN_AGENT" == "1" ] ; then
-      echo_info "installing protobuf/protobuf-c for flexran agent support"
-      install_protobuf_from_source
-      install_protobuf_c_from_source
-    fi
+    echo_info "installing protobuf/protobuf-c for flexran agent support"
+    install_protobuf_from_source
+    install_protobuf_c_from_source
   fi
 
   if [ "$INSTALL_OPTIONAL" = "1" ] ; then
@@ -481,16 +494,6 @@ function main() {
     check_install_additional_tools
   fi
 
-  if [ "$oaisim" = "1" ] ; then
-      #to be discussed
-      # there is no RF device  transport protocol 
-      HW="None" 
-      TP="ETHERNET"
-      
-      if [ "$XFORMS" == "True" ] ; then 
-	  PRINT_STATS="True"
-      fi 
-  fi
   
   
   echo_info "3. building the compilation directives ..."
@@ -498,12 +501,27 @@ function main() {
   DIR=$OPENAIR_DIR/cmake_targets
   if [ "$NOS1" =  "1" ] ; then
       lte_build_dir=lte_noS1_build_oai
-      lte_exec=lte-softmodem-nos1
+      if [ "$eNB" = "1" ] ; then
+         lte_exec=lte-softmodem-nos1
+      fi
+      if [ "$UE" = "1" ] ; then
+         lte_exec=lte-uesoftmodem-nos1
+      fi
   else
       lte_build_dir=lte_build_oai
-      lte_exec=lte-softmodem
+      if [ "$eNB" = "1" ] ; then
+         lte_exec=lte-softmodem
+      fi
+      if [ "$UE" = "1" ] ; then
+         lte_exec=lte-uesoftmodem
+      fi
   fi
-
+  if [ "$T_TRACER" =  "False" ] ; then
+      lte_build_dir=${lte_build_dir}_noLOG
+  fi
+# configuration module libraries, one currently available, using libconfig 
+  config_libconfig_shlib=params_libconfig
+  
   # first generate the CMakefile in the right directory
   if [ "$eNB" = "1" -o "$UE" = "1" -o "$HW" = "EXMIMO" ] ; then
 
@@ -518,9 +536,9 @@ function main() {
     echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
     echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
     echo "set ( XFORMS $XFORMS )"                  >>  $cmake_file
-    if [ "$FLEXRAN_AGENT" = "1" ] ; then
-	echo "set ( FLEXRAN_AGENT_SB_IF $FLEXRAN_AGENT_SB_IF )"      >>  $cmake_file
-    fi
+    echo "set ( UE_EXPANSION $UE_EXPANSION )"      >>  $cmake_file
+#    echo "set ( PHY_TX_THREAD $UE_EXPANSION )"     >>  $cmake_file
+    echo "set ( PRE_SCD_THREAD $UE_EXPANSION )"    >>  $cmake_file
     echo "set ( RRC_ASN1_VERSION \"${REL}\")"      >>  $cmake_file
     echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"     >>  $cmake_file
     echo "set ( RF_BOARD \"${HW}\")"               >>  $cmake_file
@@ -533,6 +551,7 @@ function main() {
     echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"        >>  $cmake_file
     echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"        >>  $cmake_file
     echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"        >>  $cmake_file
+    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"        >>  $cmake_file
     if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
      echo_info "Compiling UE S1 build : enabling Linux and NETLINK"
      echo "set (LINUX True )"              >>  $cmake_file
@@ -549,6 +568,14 @@ function main() {
 	  $lte_build_dir $lte_exec \
 	  $lte_exec $dbin/$lte_exec.$REL
 
+# mandatory shared lib
+    compilations \
+	  $lte_build_dir $config_libconfig_shlib \
+	  lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
+    compilations \
+          $lte_build_dir coding \
+          libcoding.so $dbin/libcoding.so
+	  
     if [ "$NOS1" = "1" ] ; then
 	compilations \
 	    $lte_build_dir nasmesh \
@@ -613,12 +640,17 @@ function main() {
   if [ "$SIMUS_PHY" = "1" ] ; then
     # lte unitary simulators compilation
     echo_info "Compiling unitary tests simulators"
-    simlist="dlsim_tm4 dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
+    # TODO: fix: dlsim_tm4 pucchsim prachsim pdcchsim pbchsim mbmssim
+    #simlist="dlsim_tm4 dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
+    simlist="dlsim ulsim"
     for f in $simlist ; do
       compilations \
       lte-simulators $f \
 	  $f $dbin/$f.$REL
     done
+    compilations \
+          lte-simulators coding \
+          libcoding.so $dbin/libcoding.so
   fi
 
   # Core simulators
@@ -656,163 +688,30 @@ function main() {
     cp $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 $dbin
   fi
 
-  # oaisim compilation
-  ###############
-  if [ "$oaisim" = "1" ] ; then
-    dconf=$OPENAIR_DIR/targets/bin
-      if [ "$NOS1" =  "1" ] ; then
-	  oaisim_build_dir=oaisim_noS1_build_oai
-	  oaisim_exec=oaisim_nos1
-      else
-	  oaisim_build_dir=oaisim_build_oai
-	  oaisim_exec=oaisim
-      fi
-    
-    echo_info "Compiling $oaisim_exec ($oaisim_build_dir)"
-    cmake_file=$DIR/$oaisim_build_dir/CMakeLists.txt
-    cp $DIR/$oaisim_build_dir/CMakeLists.template $cmake_file
-    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
-    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
-    echo "set ( XFORMS $XFORMS )" >>  $cmake_file
-    if [ "$FLEXRAN_AGENT" = "1" ] ; then
-	echo "set ( FLEXRAN_AGENT_SB_IF $FLEXRAN_AGENT_SB_IF )"      >>  $cmake_file
-    fi
-    echo "set ( PRINT_STATS $PRINT_STATS )" >>  $cmake_file
-    echo "set ( RRC_ASN1_VERSION \"${REL}\")" >>  $cmake_file
-    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >>  $cmake_file
-    echo "set ( T_TRACER $T_TRACER )"          >>  $cmake_file
-    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
-    [ "$CLEAN" = "1" ] && rm -rf $DIR/$oaisim_build_dir/build
-    mkdir -p $DIR/$oaisim_build_dir/build
-    cd $DIR/$oaisim_build_dir/build
-    eval $CMAKE_CMD
-    compilations \
-	  $oaisim_build_dir $oaisim_exec \
-	  $oaisim_exec $dbin/$oaisim_exec.$REL
 
-    if [ "$NOS1" != "1" ] ; then
-
-	[ "$CLEAN" = "1" ] && rm -rf $DIR/at_commands/build
-    	echo_info "Compiling at_nas_ue"
-	mkdir -p $DIR/at_commands/build
-	cd $DIR/at_commands/build
-	eval $CMAKE_CMD
-	compilations \
-	    at_commands at_nas_ue \
-	    at_nas_ue $dbin/at_nas_ue
-
-	# ue_ip driver compilation
-	echo_info "Compiling UE specific part (ue_ip driver and usim tools)"
-	compilations \
-	    oaisim_build_oai ue_ip \
-	    CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
-
-	[ "$CLEAN" = "1" ] && rm -rf $DIR/nas_sim_tools/build
-	mkdir -p $DIR/nas_sim_tools/build
-	cd $DIR/nas_sim_tools/build
-	eval $CMAKE_CMD
-	compilations \
-	    nas_sim_tools usim \
-	    usim $dbin/usim
-	compilations \
-	    nas_sim_tools nvram \
-	    nvram $dbin/nvram
-	compilations \
-        nas_sim_tools conf2uedata \
-        conf2uedata $dbin/conf2uedata
-
-	# generate USIM data
-	if [ -f $dbin/conf2uedata ]; then
-	    install_nas_tools $conf_nvram_path $gen_nvram_path
-	else
-	    echo_warning "not generated UE NAS files: binaries not found"
-	fi
-    else
-
-	compilations \
-	    $oaisim_build_dir rb_tool \
-	    rb_tool $dbin/rb_tool
-
-	# nasmesh driver compilation
-	compilations \
-	    $oaisim_build_dir nasmesh \
-	    CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
-
-	#oai_nw_drv
-	#compilations \
-	#    $oaisim_build_dir oai_nw_drv \
-	#    CMakeFiles/oai_nw_drv/oai_nw_drv.ko $dbin/oai_nw_drv.ko
-    fi
-
-    if [ "$TP" == "ETHERNET" ] ; then
-	compilations \
-	    $oaisim_build_dir oai_eth_transpro \
-	    liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
-	ln -sf liboai_eth_transpro.so liboai_transpro.so
-	ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
-	echo_info "liboai_transpro.so is linked with ETHERNET library"	 
-    fi
-      
-    cmake_file=$DIR/oaisim_mme_build_oai/CMakeLists.txt
-    cp $DIR/oaisim_mme_build_oai/CMakeLists.template $cmake_file
-    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
-    echo "set ( XFORMS $XFORMS )" >>  $cmake_file
-    if [ "$FLEXRAN_AGENT" = "1" ] ; then
-	echo "set ( FLEXRAN_AGENT_SB_IF $FLEXRAN_AGENT_SB_IF )"      >>  $cmake_file
-    fi
-    echo "set ( RRC_ASN1_VERSION \"${REL}\")" >>  $cmake_file
-    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >>  $cmake_file
-    echo "set ( T_TRACER $T_TRACER )"        >>  $cmake_file
-    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
-    #[ "$CLEAN" = "1" ] && rm -rf $DIR/oaisim_mme_build_oai/build
-    #mkdir -p $DIR/oaisim_mme_build_oai/build
-    #cd $DIR/oaisim_mme_build_oai/build
-    #eval $CMAKE_CMD
-    #compilations \
-	#  oaisim_mme_build_oai oaisim_mme \
-	#  oaisim_mme $dbin/oaisim_mme.$REL
-  fi
-
-  # RRH compilation
+  # Telnet server compilation
   #####################
-  if [ "$RRH" = "1" ] ; then
+  if [ "$BUILD_TELNETSRV" = "1" ] ; then
+              build_dir=$lte_build_dir
+              compilations \
+                  $build_dir telnetsrv \
+                  libtelnetsrv.so $dbin/libtelnetsrv.so
 
-     rrh_exec=rrh_gw
-     rrh_build_dir=rrh_gw
-     
-     echo_info "Compiling $rrh_exec ..."
-    
-     [ "$CLEAN" = "1" ] && rm -rf $DIR/rrh_gw/build 
-     mkdir -p $DIR/$rrh_build_dir/build
-     cmake_file=$DIR/$rrh_build_dir/CMakeLists.txt
-     echo "cmake_minimum_required(VERSION 2.8)"   >   $cmake_file
-     echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
-     echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"     >>  $cmake_file
-     echo "set ( ENABLE_ITTI False )"     		 >>  $cmake_file
-     echo "set ( RF_BOARD \"${HW}\")"               >>  $cmake_file
-     echo "set ( TRANSP_PRO \"${TP}\")"             >>  $cmake_file
-     echo 'set ( PACKAGE_NAME "\"rrh_gw\"")'        >>  $cmake_file
-     echo "set ( DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )"    >>$cmake_file
-     echo "set ( CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )"    >>$cmake_file
-     echo "set ( T_TRACER $T_TRACER )"            >>  $cmake_file
-     echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file    
-     cd $DIR/$rrh_build_dir/build
-     eval $CMAKE_CMD
-     compilations \
-	 rrh_gw rrh_gw \
-	 rrh_gw $dbin/rrh_gw
+  fi 
+  # Telnet server compilation
+  #####################
+  if [ "$MSC_GEN" = "1" ] ; then
+              build_dir=$lte_build_dir
+              compilations \
+                  $build_dir msc \
+                  libmsc.so $dbin/libmsc.so
 
-  fi
-  
+  fi  
   # build RF device and transport protocol libraries
   #####################################
-  if [ "$eNB" = "1" -o "$UE" = "1" -o  "$RRH" = "1" ] ; then
+  if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
 
-      if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
-	  build_dir=$lte_build_dir	  
-      else
-	  build_dir=$rrh_build_dir	 
-      fi
+      build_dir=$lte_build_dir	  
 
       # build RF device libraries
       if [ "$HW" != "None" ] ; then
@@ -829,11 +728,9 @@ function main() {
 	      ln -sf $dbin/liboai_exmimodevif.so.$REL $dbin/liboai_device.so
 	      echo_info "liboai_device.so is linked to EXMIMO device library"       
 	  elif [ "$HW" == "OAI_USRP" ] ; then
-	      if [ -d "/usr/include/uhd" ] ; then
-		  compilations \
-		      $build_dir oai_usrpdevif \
-		      liboai_usrpdevif.so $dbin/liboai_usrpdevif.so.$REL
-	      fi
+              compilations \
+                  $build_dir oai_usrpdevif \
+                  liboai_usrpdevif.so $dbin/liboai_usrpdevif.so.$REL
 
 	      ln -sf liboai_usrpdevif.so liboai_device.so
 	      ln -sf $dbin/liboai_usrpdevif.so.$REL $dbin/liboai_device.so
@@ -921,6 +818,124 @@ fi
   else
     echo_info "10. Bypassing the Tests ..."
   fi
+
+  # basic simulator
+  #####################
+  if [ "$BASIC_SIMULATOR" = "1" ]; then
+    echo_info "Build basic simulator"
+    [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/basic_simulator
+    [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
+    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator
+    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator/enb
+    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator/ue
+    mkdir -p $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
+
+    # enb
+
+    cmake_file=$OPENAIR_DIR/cmake_targets/basic_simulator/enb/CMakeLists.txt
+    echo "cmake_minimum_required(VERSION 2.8)"         >  $cmake_file
+    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )"  >> $cmake_file
+    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
+    echo "set ( RRC_ASN1_VERSION \"${REL}\")"          >>  $cmake_file
+    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"         >>  $cmake_file
+    echo "set ( XFORMS $XFORMS )"                      >>  $cmake_file
+    echo "set ( RF_BOARD \"OAI_USRP\")"                >>  $cmake_file
+    echo "set ( TRANSP_PRO \"None\")"                  >>  $cmake_file
+    echo "set(PACKAGE_NAME \"simulator_enb\")"         >>  $cmake_file
+    echo "set (DEADLINE_SCHEDULER \"False\" )"         >>  $cmake_file
+    echo "set (CPU_AFFINITY \"False\" )"               >>  $cmake_file
+    echo "set ( T_TRACER \"True\" )"                   >>  $cmake_file
+    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)"  >>  $cmake_file
+    echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"        >>  $cmake_file
+    echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"      >>  $cmake_file
+    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"          >>  $cmake_file
+    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"          >>  $cmake_file
+    echo "set (BASIC_SIMULATOR \"True\" )"             >>  $cmake_file
+    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)' >> $cmake_file
+
+    echo_info "Build eNB"
+    echo_info "logs are in $dlog/basic_simulator_enb.txt"
+    set +e
+    {
+      cd $OPENAIR_DIR/cmake_targets/basic_simulator/enb
+      cmake .
+      make -j`nproc` lte-softmodem
+      make -j`nproc` coding params_libconfig tcp_bridge_oai
+      ln -sf libtcp_bridge_oai.so liboai_device.so
+      cd ../..
+    } > $dlog/basic_simulator_enb.txt 2>&1
+    set -e
+    if [ -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/lte-softmodem          -a \
+         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libcoding.so           -a \
+         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libparams_libconfig.so -a \
+         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libtcp_bridge_oai.so ] ; then
+      echo_success "eNB compiled"
+      check_warnings "$dlog/basic_simulator_enb.txt"
+    else
+      echo_error "eNB compilation failed"
+      exit 1
+    fi
+
+    # ue
+
+    echo_info "Compile conf2uedata"
+    cd $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
+    eval $CMAKE_CMD
+    compilations \
+        nas_sim_tools conf2uedata \
+        conf2uedata $dbin/conf2uedata
+
+    cmake_file=$OPENAIR_DIR/cmake_targets/basic_simulator/ue/CMakeLists.txt
+    echo "cmake_minimum_required(VERSION 2.8)"        >  $cmake_file
+    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
+    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
+    echo "set ( RRC_ASN1_VERSION \"${REL}\")"         >>  $cmake_file
+    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"        >>  $cmake_file
+    echo "set ( XFORMS $XFORMS )"                     >>  $cmake_file
+    echo "set ( RF_BOARD \"OAI_USRP\")"               >>  $cmake_file
+    echo "set ( TRANSP_PRO \"None\")"                 >>  $cmake_file
+    echo "set(PACKAGE_NAME \"simulator_ue\")"         >>  $cmake_file
+    echo "set (DEADLINE_SCHEDULER \"False\" )"        >>  $cmake_file
+    echo "set (CPU_AFFINITY \"False\" )"              >>  $cmake_file
+    echo "set ( T_TRACER \"True\" )"                  >>  $cmake_file
+    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)" >>  $cmake_file
+    echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"       >>  $cmake_file
+    echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"     >>  $cmake_file
+    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"         >>  $cmake_file
+    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"         >>  $cmake_file
+    echo "set (LINUX True )"                          >>  $cmake_file
+    echo "set (PDCP_USE_NETLINK True )"               >>  $cmake_file
+    echo "set (BASIC_SIMULATOR \"True\" )"            >>  $cmake_file
+    echo "set (UE_NAS_USE_TUN \"True\" )"             >>  $cmake_file
+    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)' >> $cmake_file
+
+    echo_info "Build UE"
+    echo_info "logs are in $dlog/basic_simulator_ue.txt"
+    set +e
+    {
+      cd $OPENAIR_DIR/cmake_targets/basic_simulator/ue
+      cmake .
+      make -j`nproc` lte-uesoftmodem
+      make -j`nproc` coding params_libconfig tcp_bridge_oai
+      ln -sf libtcp_bridge_oai.so liboai_device.so
+      cd ../..
+    } > $dlog/basic_simulator_ue.txt 2>&1
+    set -e
+    if [ -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/lte-uesoftmodem -a \
+         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libcoding.so -a \
+         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libparams_libconfig.so -a \
+         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libtcp_bridge_oai.so ] ; then
+      echo_success "UE compiled"
+      check_warnings "$dlog/basic_simulator_ue.txt"
+    else
+      echo_error "UE compilation failed"
+      exit 1
+    fi
+
+    echo_info "Generate UE SIM data"
+    $OPENAIR_DIR/targets/bin/conf2uedata -c $OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf -o $OPENAIR_DIR/cmake_targets/basic_simulator/ue
+
+  fi
 }
 
 main "$@"

cmake_targets/epc_test/CMakeLists.template

@@ -2,17 +2,13 @@ cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
 set (  ASN_DEBUG False)
-set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
-set (  EMOS False )
 set (  EMIT_ASN_DEBUG False )
-set (  ENABLE_FXP True )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING True )
 set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_PGM_TRANSPORT True )
 set (  ENABLE_SECURITY True )
 set (  ENABLE_STANDALONE_EPC False)
 set (  ENABLE_USE_CPU_EXECUTION_TIME True )
@@ -21,7 +17,6 @@ set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
 set (  ENABLE_VCD_FIFO False )
 set (  ENB_MODE True )
 set (  EXMIMO_IOT True )
-set (  HARD_RT False )
 set (  JUMBO_FRAME True )
 set (  LARGE_SCALE False )
 set (  LINK_ENB_PDCP_TO_GTPV1U True)
@@ -33,7 +28,6 @@ set (  DEADLINE_SCHEDULER False )
 set (  MAC_CONTEXT 1 )
 set (  MAX_NUM_CCs 1 )
 set (  MESSAGE_CHART_GENERATOR False)
-set (  MIH_C_MEDIEVAL_EXTENSIONS False )
 set (  MSG_PRINT False )
 set (  MU_RECEIVER False )
 set (  NAS_ADDRESS_FIX False )
@@ -42,38 +36,25 @@ set (  NAS_MME False )
 set (  NAS_UE True )
 set (  NB_ANTENNAS_RX "2" )
 set (  NB_ANTENNAS_TX "2" )
-set (  NB_ANTENNAS_TXRX "2" )
-set (  NEW_FFT True )
 set (  NO_RRM True )
-set (  OAI_EMU False )
 set (  OAISIM False )
 set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
 set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR1 True )
 set (  OPENAIR2 True )
 set (  OPENAIR_LTE True )
 set (  PACKAGE_NAME "epc_test" )
-set (  PBS_SIM False )
 set (  PDCP_USE_NETLINK True )
-set (  PC_DSP True )
-set (  PC_TARGET True )
 set (  PDCP_MSG_PRINT False )
-set (  PERFECT_CE False )
-set (  PHY_ABSTRACTION True )
 set (  PHY_CONTEXT False )
 set (  PHY_EMUL False )
 set (  PHYSIM True )
-set (  PUCCH True )
-set (  RANDOM_BF False )
 set (  RF_BOARD "False" )
 set (  RLC_STOP_ON_LOST_PDU False )
 set (  RRC_ASN1_VERSION "Rel10" )
 set (  RRC_DEFAULT_RAB_IS_AM True)
 set (  RRC_MSG_PRINT False )
-set (  RTAI False )
 set (  SECU False )
 set (  SMBV False )
 set (  TEST_OMG False )
 set (  USE_MME "R10" )
-set (  USER_MODE True )
 set (  XER_PRINT True )

cmake_targets/lte-simulators/CMakeLists.txt

@@ -1,4 +1,5 @@
 cmake_minimum_required(VERSION 2.8)
+set(RRC_ASN1_VERSION "Rel14")
 set(PACKAGE_NAME "unitary_tests_simulators")
 set(PHYSIM True)
 set(RF_BOARD None)
@@ -6,10 +7,7 @@ set(XFORMS True)
 set(ENABLE_ITTI False)
 set(DEBUG_PHY False)
 set(MU_RECIEVER False)
-set(RANDOM_BF False)
-set(PBS_SIM False)
-set(PERFECT_CE True)
 set(NAS_UE False)
 set(MESSAGE_CHART_GENERATOR False)
-
+set(RRC_ASN1_VERSION "Rel14")
 include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)

cmake_targets/lte_noS1_build_oai/CMakeLists.template

@@ -7,3 +7,4 @@ set(PDCP_USE_NETLINK_QUEUES False)
 set(LINUX True)
 set(SECU False)
 set(NAS_UE False)
+

cmake_targets/nas_sim_tools/CMakeLists.txt

@@ -27,7 +27,6 @@ set(CONF2UEDATA_LIB_SRC
     ${OPENAIR_DIR}/openair3/NAS/UE/API/USIM/usim_api.c
     ${OPENAIR_DIR}/openair3/NAS/UE/API/USIM/aka_functions.c
     ${OPENAIR_DIR}/openair3/NAS/COMMON/UTIL/memory.c
-    ${OPENAIR_DIR}/openair3/NAS/COMMON/UTIL/nas_log.c
     ${OPENAIR_DIR}/openair3/NAS/COMMON/UTIL/OctetString.c
     ${OPENAIR_DIR}/openair3/NAS/COMMON/UTIL/TLVEncoder.c
     ${OPENAIR_DIR}/common/utils/utils.c

cmake_targets/oaisim_build_oai/CMakeLists.template

@@ -1,80 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-
-set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  ADDR_CONF False )
-set (  DEBUG_OMG False )
-set (  DISABLE_XER_PRINT False )
-set (  DRIVER2013 True )
-set (  EMOS False )
-set (  ENABLE_FXP True )
-set (  ENABLE_ITTI True )
-set (  ENABLE_NAS_UE_LOGGING True )
-set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_PGM_TRANSPORT True )
-set (  ENABLE_RAL False )
-set (  ENABLE_SECURITY True )
-set (  ENABLE_STANDALONE_EPC False)
-set (  ENABLE_USE_CPU_EXECUTION_TIME True )
-set (  ENABLE_USE_MME True )
-set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
-set (  ENABLE_VCD_FIFO False )
-set (  ENB_MODE True )
-set (  EXMIMO_IOT True )
-set (  HARD_RT False )
-set (  JUMBO_FRAME True )
-set (  LARGE_SCALE False )
-set (  LINK_ENB_PDCP_TO_GTPV1U True)
-set (  LINUX_LIST False )
-set (  LINUX True )
-set (  LOCALIZATION False )
-set (  LOG_NO_THREAD True )
-set (  DEADLINE_SCHEDULER False )
-set (  MAC_CONTEXT 1 )
-set (  MAX_NUM_CCs 1 )
-set (  MESSAGE_CHART_GENERATOR False)
-set (  MIH_C_MEDIEVAL_EXTENSIONS False )
-set (  MSG_PRINT False )
-set (  MU_RECEIVER False )
-set (  NAS_ADDRESS_FIX False )
-set (  NAS_BUILT_IN_UE True)
-set (  NAS_MME False )
-set (  NAS_UE True )
-set (  NB_ANTENNAS_RX "2" )
-set (  NB_ANTENNAS_TX "2" )
-set (  NB_ANTENNAS_TXRX "2" )
-set (  NEW_FFT True )
-set (  NO_RRM True )
-set (  OAI_EMU True )
-set (  OAISIM True )
-set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
-set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR1 True )
-set (  OPENAIR2 True )
-set (  OPENAIR_LTE True )
-set (  PACKAGE_NAME "oaisim" )
-set (  PBS_SIM False )
-set (  PDCP_USE_NETLINK True )
-set (  PC_DSP True )
-set (  PC_TARGET True )
-set (  PDCP_MSG_PRINT False )
-set (  PERFECT_CE False )
-set (  PHY_ABSTRACTION True )
-set (  PHY_CONTEXT False )
-set (  PHY_EMUL False )
-set (  PHYSIM True )
-set (  PUCCH True )
-set (  RANDOM_BF False )
-set (  RF_BOARD "False" )
-set (  RLC_STOP_ON_LOST_PDU False )
-set (  RRC_ASN1_VERSION "Rel10" )
-set (  RRC_DEFAULT_RAB_IS_AM True)
-set (  RRC_MSG_PRINT False )
-set (  RTAI False )
-set (  SECU False )
-set (  SMBV False )
-set (  SPECTRA False )
-set (  TEST_OMG False )
-set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
-set (  USE_MME "R10" )
-set (  USER_MODE True )
-set (  XER_PRINT False )

cmake_targets/oaisim_mme_build_oai/CMakeLists.template

@@ -1,83 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-
-set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  ADDR_CONF False )
-set (  DEBUG_OMG False )
-set (  DISABLE_XER_PRINT False )
-set (  DRIVER2013 False )
-set (  EMOS False )
-set (  ENABLE_FXP False )
-set (  ENABLE_ITTI True )
-set (  ENABLE_NAS_UE_LOGGING False )
-set (  ENABLE_NEW_MULTICAST False )
-set (  ENABLE_PGM_TRANSPORT False )
-set (  ENABLE_RAL False )
-set (  ENABLE_SECURITY False )
-set (  ENABLE_STANDALONE_EPC False )
-set (  ENABLE_USE_CPU_EXECUTION_TIME False )
-set (  ENABLE_USE_MME False )
-set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
-set (  ENABLE_VCD_FIFO False )
-set (  ENB_MODE False )
-set (  EPC_BUILD True )
-set (  EXMIMO_IOT False )
-set (  HARD_RT False )
-set (  JUMBO_FRAME False )
-set (  LARGE_SCALE False )
-set (  LINK_ENB_PDCP_TO_GTPV1U True)
-set (  LINUX_LIST False )
-set (  LINUX False )
-set (  LOCALIZATION False )
-set (  LOG_NO_THREAD False )
-set (  DEADLINE_SCHEDULER False )
-set (  MAC_CONTEXT 1 )
-set (  MAX_NUM_CCs 1 )
-set (  MIH_C_MEDIEVAL_EXTENSIONS False )
-set (  MSG_PRINT False )
-set (  MU_RECEIVER False )
-set (  NAS_ADDRESS_FIX False )
-set (  NAS_BUILT_IN_EPC True )
-set (  NAS_MME True )
-set (  NAS_NETLINK False )
-set (  NAS_UE False )
-set (  NB_ANTENNAS_RX "2" )
-set (  NB_ANTENNAS_TX "2" )
-set (  NB_ANTENNAS_TXRX "2" )
-set (  NEW_FFT False )
-set (  NO_RRM False )
-set (  OAI_EMU False )
-set (  OAISIM False )
-set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
-set (  OAI_NW_DRIVER_USE_NETLINK False )
-set (  OPENAIR1 False )
-set (  OPENAIR2 False )
-set (  OPENAIR_EMU False )
-set (  OPENAIR_LTE False )
-set (  PACKAGE_NAME "EPC" )
-set (  PBS_SIM False )
-set (  PC_DSP False )
-set (  PC_TARGET False )
-set (  PDCP_MSG_PRINT False )
-set (  PERFECT_CE False )
-set (  PHY_ABSTRACTION False )
-set (  PHY_CONTEXT False )
-set (  PHY_EMUL False )
-set (  PHYSIM False )
-set (  PUCCH False )
-set (  RANDOM_BF False )
-set (  RF_BOARD "False" )
-set (  RRC_ASN1_VERSION "Rel10" )
-set (  RLC_STOP_ON_LOST_PDU False )
-set (  RRC_MSG_PRINT False )
-set (  RTAI False )
-set (  SECU False )
-set (  SMBV False )
-set (  SPECTRA False )
-set (  TEST_OMG False )
-set (  UPDATE_RELEASE_9 True)
-set (  UPDATE_RELEASE_10 True)
-set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
-set (  USE_MME "R10" )
-set (  USER_MODE True )
-set (  XER_PRINT False )
-set (  XFORMS False )

cmake_targets/oaisim_noS1_build_oai/CMakeLists.template

@@ -1,84 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-
-set (  ADDR_CONF False )
-set (  DEBUG_OMG False )
-set (  DISABLE_XER_PRINT False )
-set (  DRIVER2013 True )
-set (  EMOS False )
-set (  ENABLE_FXP True )
-set (  ENABLE_ITTI True )
-set (  ENABLE_NAS_UE_LOGGING False )
-set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_PGM_TRANSPORT True )
-set (  ENABLE_RAL False )
-set (  ENABLE_SECURITY False )
-set (  ENABLE_STANDALONE_EPC False)
-set (  ENABLE_USE_CPU_EXECUTION_TIME True )
-set (  ENABLE_USE_MME False )
-set (  ENABLE_USE_RAW_SOCKET_FOR_SGI False)
-set (  ENABLE_VCD_FIFO False )
-set (  ENB_MODE True )
-set (  EXMIMO_IOT True )
-set (  HARD_RT False )
-set (  JUMBO_FRAME True )
-set (  LARGE_SCALE False )
-set (  LINK_ENB_PDCP_TO_GTPV1U False)
-set (  LINUX_LIST False )
-set (  LINUX True )
-set (  LOCALIZATION False )
-set (  LOG_NO_THREAD 1 )
-set (  DEADLINE_SCHEDULER False )
-set (  MAC_CONTEXT 1 )
-set (  MAX_NUM_CCs 1 )
-set (  MESSAGE_CHART_GENERATOR         False )
-set (  MESSAGE_CHART_GENERATOR_RLC_MAC False )
-set (  MESSAGE_CHART_GENERATOR_PHY     False )
-set (  MIH_C_MEDIEVAL_EXTENSIONS False )
-set (  MSG_PRINT False )
-set (  MU_RECEIVER False )
-set (  NAS_ADDRESS_FIX True )
-set (  NAS_BUILT_IN_UE False)
-set (  NAS_MME False )
-set (  NAS_UE False )
-set (  NB_ANTENNAS_RX "2" )
-set (  NB_ANTENNAS_TX "2" )
-set (  NB_ANTENNAS_TXRX "2" )
-set (  NEW_FFT True )
-set (  NO_RRM True )
-set (  OAI_EMU True )
-set (  OAISIM True )
-set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
-set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR1 True )
-set (  OPENAIR2 True )
-set (  OPENAIR_EMU False )
-set (  OPENAIR_LTE True )
-set (  PACKAGE_NAME "oaisim" )
-set (  PBS_SIM False )
-set (  PDCP_USE_NETLINK True )
-set (  PC_DSP True )
-set (  PC_TARGET True )
-set (  PDCP_MSG_PRINT False )
-set (  PERFECT_CE False )
-set (  PHY_ABSTRACTION True )
-set (  PHY_CONTEXT False )
-set (  PHY_EMUL False )
-set (  PHYSIM True )
-set (  PUCCH True )
-set (  RANDOM_BF False )
-set (  RF_BOARD "False" )
-set (  RRC_ASN1_VERSION "Rel10" )
-set (  RLC_STOP_ON_LOST_PDU False )
-set (  RRC_MSG_PRINT False )
-set (  RTAI False )
-set (  SECU False )
-set (  SMBV False )
-set (  SPECTRA False )
-set (  TEST_OMG False )
-set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
-set (  USE_MME "R10" )
-set (  USER_MODE True )
-set (  XER_PRINT False )
-set (  DEBUG_PHY False )
-set (  DEBUG_PHY_PROC False)
-set (  DEBUG_DLSCH False)

cmake_targets/s1c_mme_test/CMakeLists.template

@@ -1,17 +1,13 @@
 cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
-set (  EMOS False )
-set (  ENABLE_FXP True )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING True )
 set (  ENABLE_NEW_MULTICAST True )
 set (  ENABLE_PDCP_NETLINK_FIFO False )
-set (  ENABLE_PGM_TRANSPORT True )
 set (  ENABLE_RAL False )
 set (  ENABLE_SECURITY True )
 set (  ENABLE_STANDALONE_EPC False)
@@ -21,7 +17,6 @@ set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
 set (  ENABLE_VCD_FIFO False )
 set (  ENB_MODE True )
 set (  EXMIMO_IOT True )
-set (  HARD_RT False )
 set (  JUMBO_FRAME True )
 set (  LARGE_SCALE False )
 set (  LINK_ENB_PDCP_TO_GTPV1U True)
@@ -33,7 +28,6 @@ set (  DEADLINE_SCHEDULER False )
 set (  MAC_CONTEXT 1 )
 set (  MAX_NUM_CCs 1 )
 set (  MESSAGE_CHART_GENERATOR False)
-set (  MIH_C_MEDIEVAL_EXTENSIONS False )
 set (  MSG_PRINT False )
 set (  MU_RECEIVER False )
 set (  NAS_ADDRESS_FIX False )
@@ -42,44 +36,30 @@ set (  NAS_MME False )
 set (  NAS_UE True )
 set (  NB_ANTENNAS_RX "2" )
 set (  NB_ANTENNAS_TX "2" )
-set (  NB_ANTENNAS_TXRX "2" )
-set (  NEW_FFT True )
 set (  NO_RRM True )
-set (  OAI_EMU True )
 set (  OAISIM True )
 set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
 set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR1 True )
 set (  OPENAIR2 True )
 set (  OPENAIR_LTE True )
 set (  PACKAGE_NAME "oaisim" )
-set (  PBS_SIM False )
 set (  PDCP_USE_NETLINK True )
-set (  PC_DSP True )
-set (  PC_TARGET True )
 set (  PDCP_MSG_PRINT False )
-set (  PERFECT_CE False )
-set (  PHY_ABSTRACTION True )
 set (  PHY_CONTEXT False )
 set (  PHY_EMUL False )
 set (  PHYSIM True )
-set (  PUCCH True )
-set (  RANDOM_BF False )
 set (  RF_BOARD "False" )
 set (  RLC_STOP_ON_LOST_PDU False )
 set (  RRC_ASN1_VERSION "Rel10" )
 set (  RRC_DEFAULT_RAB_IS_AM True)
 set (  RRC_MSG_PRINT False )
-set (  RTAI False )
 set (  SECU False )
 set (  SMBV False )
-set (  SPECTRA False )
 set (  TEST_OMG False )
 
 set (  TEST_S1C_MME True )
 
 set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
 set (  USE_MME "R10" )
-set (  USER_MODE True )
 set (  XER_PRINT False )
 set (  XFORMS False )

cmake_targets/tools/asn1tostruct.py

@@ -38,7 +38,7 @@ def outputHeaderToFile(f, filename):
  * contributor license agreements.  See the NOTICE file distributed with
  * this work for additional information regarding copyright ownership.
  * The OpenAirInterface Software Alliance licenses this file to You under
- * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
  * except in compliance with the License.
  * You may obtain a copy of the License at
  *

cmake_targets/tools/build_helper

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *
@@ -56,7 +56,7 @@ white='\E[37m'
 reset_color='\E[00m'
 COLORIZE=1
 
-cecho()  {  
+cecho()  {
     # Color-echo
     # arg1 = message
     # arg2 = color
@@ -95,6 +95,9 @@ get_distribution_release() {
 check_supported_distribution() {
     local distribution=$(get_distribution_release)
     case "$distribution" in
+        "ubuntu18.04") return 0 ;;
+        "ubuntu17.10") return 0 ;;
+        "ubuntu17.04") return 0 ;;
         "ubuntu16.04") return 0 ;;
         "ubuntu14.04") return 0 ;;
         "fedora24")    return 0 ;;
@@ -144,10 +147,10 @@ clean_kernel() {
 clean_all_files() {
  set_openair_env
  dir=$OPENAIR_DIR/cmake_targets
- rm -rf $dir/log $OPENAIR_DIR/targets/bin/* 
+ rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
  rm -rf $dir/lte_build_oai $dir/lte-simulators/build
  rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
- rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build 
+ rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
 }
 
 ###################################
@@ -208,7 +211,7 @@ install_protobuf_from_source(){
     #cd protobuf-2.6.1/
     rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
     wget https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
-    tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $USER --no-same-owner
+    tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
     cd protobuf-3.3.0/
     ./configure
     echo "Compiling protobuf"
@@ -230,6 +233,7 @@ install_protobuf_c_from_source(){
     rm -rf /tmp/protobuf-c
     git clone https://github.com/protobuf-c/protobuf-c.git
     cd protobuf-c
+	git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
     ./autogen.sh
     ./configure
     echo "Compiling protobuf-c"
@@ -246,14 +250,14 @@ install_usrp_uhd_driver_from_source(){
     cd /tmp
     echo "Downloading UHD driver"
     rm -rf /tmp/uhd
-    git clone git://github.com/EttusResearch/uhd.git
+    git clone https://github.com/EttusResearch/uhd.git
     cd uhd
     git checkout tags/release_003_010_001_001
     mkdir -p host/build
     cd host/build
     $CMAKE ../
     echo "Compiling UHD"
-    make
+    make -j`nproc`
     make test
     $SUDO make install
     $SUDO ldconfig
@@ -264,20 +268,36 @@ check_install_usrp_uhd_driver(){
     if [[ "$OS_DISTRO" == "ubuntu" ]]; then
         #first we remove old installation
         $SUDO apt-get remove -y uhd || true
-        $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y
+        $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y || true
         v=$(lsb_release -cs)
         $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
-        #The new USRP repository
-        $SUDO add-apt-repository ppa:ettusresearch/uhd -y
+        # The new USRP repository
+        # Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
+        # timeout due to proxy / network latencies in Eurecom on VM
+        echo_info "\nAdding PPA repository ettusresearch/uhd\n"
+        x=0
+        while [ $x -le 5 ]
+        do
+            if $SUDO add-apt-repository ppa:ettusresearch/uhd -y
+            then
+                echo_info "add-apt-repository successful\n"
+                break
+            else
+                echo_info "add-apt-repository failed, retrying...\n"
+                sleep 30
+            fi
+            x=$((x + 1))
+        done
         $SUDO apt-get update
         $SUDO apt-get -y --allow-unauthenticated install  python python-tk libboost-all-dev libusb-1.0-0-dev
         $SUDO apt-get -y --allow-unauthenticated install libuhd-dev libuhd003 uhd-host
     elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
         $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
+        $SUDO pip install requests
         if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
             # until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
             $SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
-            install_ursp_uhd_driver_from_source
+            install_usrp_uhd_driver_from_source
         else
             $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
         fi
@@ -332,7 +352,7 @@ check_install_bladerf_driver(){
         fi
         $SUDO apt-get install -y --allow-unauthenticated  bladerf libbladerf-dev
         $SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
-        $SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40	
+        $SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40
    elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
         install_bladerf_driver_from_source
    else
@@ -353,7 +373,7 @@ check_install_lmssdr_driver(){
                 echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                            " from sources. check:"
                 echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
-                echo_fatal "Cannot compile lmssdr device" 
+                echo_fatal "Cannot compile lmssdr device"
 	fi
 
 
@@ -450,7 +470,7 @@ check_install_additional_tools (){
       python2-matplotlib"
   fi
     $SUDO $INSTALLER install -y $PACKAGE_LIST
-    
+
     $SUDO rm -fr /opt/ssh
     $SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh
 
@@ -479,16 +499,31 @@ check_install_oai_software() {
     fi
     $SUDO $INSTALLER update -y
   if [[ "$OS_DISTRO" == "ubuntu" ]]; then
+    local LAPACK_LIBNAME="liblapack.so"
+    local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
     $SUDO apt install -y software-properties-common
     case "$(get_distribution_release)" in
         "ubuntu14.04")
-            specific_packages="libtasn1-3-dev"
+            specific_packages="libtasn1-3-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
             # For iperf3
             $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
             $SUDO apt-get update
             ;;
         "ubuntu16.04")
-            specific_packages="libtasn1-6-dev"
+            specific_packages="libtasn1-6-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
+            ;;
+        "ubuntu17.04")
+            specific_packages="libtasn1-6-dev libgnutls28-dev libatlas-dev iproute libconfig8-dev"
+            ;;
+        "ubuntu17.10")
+            specific_packages="libtasn1-6-dev libgnutls28-dev iproute libconfig8-dev"
+            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
+            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
+            ;;
+        "ubuntu18.04")
+            specific_packages="libtasn1-6-dev libgnutls28-dev iproute2 libconfig-dev"
+            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
+            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
             ;;
     esac
     $SUDO apt-get install -y \
@@ -504,20 +539,18 @@ check_install_oai_software() {
 	texlive-latex-base \
 	ethtool \
 	flex  \
-	gccxml \
 	gdb  \
 	git \
 	graphviz \
 	gtkwave \
 	guile-2.0-dev  \
 	iperf \
-	iproute \
 	iptables \
 	iptables-dev \
 	libatlas-base-dev \
-	libatlas-dev \
 	libblas-dev \
-	libconfig8-dev \
+  liblapack-dev\
+  liblapacke-dev\
 	libffi-dev \
 	libforms-bin \
 	libforms-dev \
@@ -553,11 +586,9 @@ check_install_oai_software() {
 	wget \
 	libxpm-dev
 
-    $SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
-    
-    $SUDO apt-get install -y nettle-dev nettle-bin
+    $SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"
 
-    $SUDO apt-get install -y libgnutls-dev
+    $SUDO apt-get install -y nettle-dev nettle-bin
   elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
     if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
       if rpm -q epel-release > /dev/null; then
@@ -566,14 +597,11 @@ check_install_oai_software() {
         echo "EPEL repos not present. Installing them."
         $SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
       fi
-      $SUDO $INSTALLER install -y python-epdb
-      $SUDO $INSTALLER install -y gccxml
+      $SUDO $INSTALLER install -y python-epdb vim-common
     else
       $SUDO $INSTALLER install -y mscgen pydb
-      # Fedora repos already contain gccxml's successor castxml.
-      $SUDO $INSTALLER install -y castxml
     fi
-    
+
     $SUDO $INSTALLER install -y \
       autoconf \
       automake \
@@ -635,7 +663,8 @@ check_install_oai_software() {
       lapack \
       lapack-devel \
       blas \
-      blas-devel
+      blas-devel \
+      libyaml-devel
   fi
 
     install_asn1c_from_source
@@ -648,8 +677,14 @@ install_asn1c_from_source(){
     echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
     (
     $SUDO rm -rf /tmp/asn1c
-    GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
+    # GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
+    git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
     cd /tmp/asn1c
+    # better to use a given commit than a branch in case the branch
+    # is updated and requires modifications in the source of OAI
+    #git checkout velichkov_s1ap_plus_option_group
+    git checkout d3aed06bb2bec7df1b5c6d0333f8c7dfc5993372
+    autoreconf -iv
     ./configure
     make -j`nproc`
     $SUDO make install
@@ -659,7 +694,7 @@ install_asn1c_from_source(){
 }
 
 #################################################
-# 2. compile 
+# 2. compile
 ################################################
 
 install_nas_tools() {
@@ -688,7 +723,7 @@ set_openair_env(){
     [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
     openair_path=${fullpath%/cmake_targets/*}
     openair_path=${openair_path%/targets/*}
-    openair_path=${openair_path%/openair[123]/*}    
+    openair_path=${openair_path%/openair[123]/*}
     export OPENAIR_DIR=$openair_path
     export OPENAIR1_DIR=$openair_path/openair1
     export OPENAIR2_DIR=$openair_path/openair2
@@ -705,7 +740,7 @@ ppid=$$
 arraycounter=1
 echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
 echo_info "** Calling sync now..."
-sync 
+sync
 while true
 do
         FORLOOP=FALSE
@@ -723,7 +758,7 @@ do
            arraycounter=`expr $arraycounter - 1`
            ## We want to kill child process id first and then parent id's
            while [ $arraycounter -ne 0 ]
-           do  
+           do
              echo "first we send ctrl-c to program"
              $SUDO kill -INT "${procid[$arraycounter]}"
              sleep 5

cmake_targets/tools/build_test_epc_tools

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/tools/example_enb_exmimo_mme_hss.txt

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/tools/example_oaisim_enb_ue_mme_virtual.txt

@@ -3,7 +3,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/tools/fix_asn1

@@ -4,7 +4,8 @@
 #   <file> <sha1sum of file (without line 4 which changes depending on the location of the files)> <patch to apply to file>
 
 RRC_Rel14=(
-  "SystemInformation-r8-IEs.h" 562e3c3aeb7c6d76d722f31bf24488a26e627f33 "fix_asn1.data/RRC.rel14/SystemInformation-r8-IEs.h.diff"
+  "SystemInformation-r8-IEs.h" 4df485c5ddf2540eca271876cdc512caa19b0890 "fix_asn1.data/RRC.rel14/SystemInformation-r8-IEs.h.diff"
+  "SystemInformation-NB-r13-IEs.h" 6d91332d5c39205819b06e5e36efe62ff8e5b33b "fix_asn1.data/RRC.rel14/SystemInformation-NB-r13-IEs.h.diff"
 )
 
 RRC_Rel10=(

cmake_targets/tools/fix_asn1.data/RRC.rel14/SystemInformation-NB-r13-IEs.h.diff

@@ -0,0 +1,47 @@
+48a49,70
+> struct SystemInformation_NB_r13_IEs__sib_TypeAndInfo_r13__Member {
+> 	SystemInformation_NB_r13_IEs__sib_TypeAndInfo_r13__Member_PR present;
+> 	union SystemInformation_NB_r13_IEs__sib_TypeAndInfo_r13__Member_u {
+> 		SystemInformationBlockType2_NB_r13_t	 sib2_r13;
+> 		SystemInformationBlockType3_NB_r13_t	 sib3_r13;
+> 		SystemInformationBlockType4_NB_r13_t	 sib4_r13;
+> 		SystemInformationBlockType5_NB_r13_t	 sib5_r13;
+> 		SystemInformationBlockType14_NB_r13_t	 sib14_r13;
+> 		SystemInformationBlockType16_NB_r13_t	 sib16_r13;
+> 		/*
+> 		 * This type is extensible,
+> 		 * possible extensions are below.
+> 		 */
+> 		SystemInformationBlockType15_NB_r14_t	 sib15_v1430;
+> 		SystemInformationBlockType20_NB_r14_t	 sib20_v1430;
+> 		SystemInformationBlockType22_NB_r14_t	 sib22_v1430;
+> 	} choice;
+> 	
+> 	/* Context for parsing across buffer boundaries */
+> 	asn_struct_ctx_t _asn_ctx;
+> };
+> 
+52,72c74
+< 		A_SEQUENCE_OF(struct SystemInformation_NB_r13_IEs__sib_TypeAndInfo_r13__Member {
+< 			SystemInformation_NB_r13_IEs__sib_TypeAndInfo_r13__Member_PR present;
+< 			union SystemInformation_NB_r13_IEs__sib_TypeAndInfo_r13__Member_u {
+< 				SystemInformationBlockType2_NB_r13_t	 sib2_r13;
+< 				SystemInformationBlockType3_NB_r13_t	 sib3_r13;
+< 				SystemInformationBlockType4_NB_r13_t	 sib4_r13;
+< 				SystemInformationBlockType5_NB_r13_t	 sib5_r13;
+< 				SystemInformationBlockType14_NB_r13_t	 sib14_r13;
+< 				SystemInformationBlockType16_NB_r13_t	 sib16_r13;
+< 				/*
+< 				 * This type is extensible,
+< 				 * possible extensions are below.
+< 				 */
+< 				SystemInformationBlockType15_NB_r14_t	 sib15_v1430;
+< 				SystemInformationBlockType20_NB_r14_t	 sib20_v1430;
+< 				SystemInformationBlockType22_NB_r14_t	 sib22_v1430;
+< 			} choice;
+< 			
+< 			/* Context for parsing across buffer boundaries */
+< 			asn_struct_ctx_t _asn_ctx;
+< 		} ) list;
+---
+> 		A_SEQUENCE_OF(struct SystemInformation_NB_r13_IEs__sib_TypeAndInfo_r13__Member) list;

cmake_targets/tools/indent_source_code

@@ -4,7 +4,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/tools/init_exmimo2

@@ -5,7 +5,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *

cmake_targets/tools/init_nas_nos1

@@ -5,7 +5,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *
@@ -44,11 +44,11 @@ load_module $OPENAIR_DIR/targets/bin/nasmesh.ko
 if [ "$1" = "eNB" ]; then 
      echo "bring up oai0 interface for enb"
      sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
-     $OPENAIR_DIR/targets/bin/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 1
+     $OPENAIR_DIR/targets/bin/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 1
 else
     if [ "$1" = "UE" ]; then 
        echo "bring up oai0 interface for UE"
-       sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
-       $OPENAIR_DIR/targets/bin/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 1
+       sudo ifconfig oai0 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255
+       $OPENAIR_DIR/targets/bin/rb_tool -a -c0 -i0 -z0 -s 10.0.1.2 -t 10.0.1.1 -r 1
     fi
 fi  

cmake_targets/tools/init_nas_s1

@@ -8,7 +8,7 @@
 # * contributor license agreements.  See the NOTICE file distributed with
 # * this work for additional information regarding copyright ownership.
 # * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
 # * except in compliance with the License.
 # * You may obtain a copy of the License at
 # *