Fix comment.

# Conflicts:
#	cmake_targets/build_oai

.dockerignore

@@ -0,0 +1,8 @@
+*.log
+cmake_targets/log/
+cmake_targets/ran_build/
+common/utils/T/T_IDs.h
+common/utils/T/T_messages.txt.h
+common/utils/T/genids
+common/utils/T/genids.o
+targets/bin/

.vscode/launch.json

@@ -25,4 +25,4 @@
             ]
         }
     ]
-}
+}

NOTICE.md

@@ -21,3 +21,7 @@ The Regents of the University of California: BSD 3-Clause Licence.
 
 Niels Provos <provos@citi.umich.edu>: BSD 2-Clause Licence.
 
+## Credits for source code openair3/GTPV1-U/nw-gtpv1u: ##
+
+Amit Chawre <http://www.amitchawre.net/contact.html>: BSD 2-Clause Licence.
+

ci-scripts/Jenkinsfile-GitLab-Container

@@ -0,0 +1,283 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Location of the executor node
+def nodeExecutor = params.nodeExecutor
+
+// Tags to shorten pipeline duration
+def doMandatoryTests = false
+def doFullTestsuite = false
+
+//
+def gitCommitAuthorEmailAddr
+
+pipeline {
+  agent {
+    label nodeExecutor
+  }
+  options {
+    disableConcurrentBuilds()
+    timestamps()
+    gitLabConnection('OAI GitLab')
+    ansiColor('xterm')
+  }
+
+  stages {
+    stage ("Verify Parameters") {
+      steps {
+        script {
+          JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"'
+          JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
+
+          echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+          def allParametersPresent = true
+
+          echo '\u2705 \u001B[32mVerify Labels\u001B[0m'
+          if ("MERGE".equals(env.gitlabActionType)) {
+            LABEL_CHECK = sh returnStdout: true, script: 'ci-scripts/checkGitLabMergeRequestLabels.sh --mr-id ' + env.gitlabMergeRequestIid
+            LABEL_CHECK = LABEL_CHECK.trim()
+            if (LABEL_CHECK == 'NONE') {
+              def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Your merge request has none of the mandatory labels:\n\n"
+              message += " - BUILD-ONLY\n"
+              message += " - 4G-LTE\n"
+              message += " - 5G-NR\n"
+              message += " - CI\n\n"
+              message += "Not performing CI due to lack of labels"
+              addGitLabMRComment comment: message
+              error('Not performing CI due to lack of labels')
+            } else if (LABEL_CHECK == 'FULL') {
+              doMandatoryTests = true
+              doFullTestsuite = true
+            } else if (LABEL_CHECK == 'SHORTEN-5G') {
+              doMandatoryTests = true
+            } else {
+              def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): We will perform only build stages on your Merge Request"
+              addGitLabMRComment comment: message
+            }
+          } else {
+            doMandatoryTests = true
+            doFullTestsuite = true
+          }
+        }
+      }
+    }
+    stage ("Verify Guidelines") {
+      steps {
+        echo "Git URL     is ${GIT_URL}"
+        echo "GitLab Act    is ${env.gitlabActionType}"
+        script {
+          if ("MERGE".equals(env.gitlabActionType)) {
+            // since a bit, in push events, gitlabUserEmail is not populated
+            gitCommitAuthorEmailAddr = env.gitlabUserEmail
+            echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
+            // GitLab-Jenkins plugin integration is lacking to perform the merge by itself
+            // Doing it manually --> it may have merge conflicts
+            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+          } else {
+            echo "Git Branch    is ${GIT_BRANCH}"
+            echo "Git Commit    is ${GIT_COMMIT}"
+            // since a bit, in push events, gitlabUserEmail is not populated
+            gitCommitAuthorEmailAddr = sh returnStdout: true, script: 'git log -n1 --pretty=format:%ae ${GIT_COMMIT}'
+            gitCommitAuthorEmailAddr = gitCommitAuthorEmailAddr.trim()
+            echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
+            sh "git log -n1 --pretty=format:\"%s\" > .git/CI_COMMIT_MSG"
+          }
+        }
+      }
+      post {
+        failure {
+          script {
+            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Merge Conflicts -- Cannot perform CI"
+            addGitLabMRComment comment: message
+            currentBuild.result = 'FAILURE'
+          }
+        }
+      }
+    }
+    // Build Stages are Mandatory
+    // Later we will add a Ubuntu20 build
+    stage ("Image Building Processes") {
+      parallel {
+        stage ("Ubuntu18 Build") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-Ubuntu18-Image-Builder', 'Ubuntu18-Images-Build')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-Ubuntu18-Image-Builder')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("RHEL8 Build") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-RHEL8-Image-Builder', 'RHEL8-Images-Build')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-RHEL8-Image-Builder')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("CppCheck Analysis") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-cppcheck', 'CppCheck Analysis')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-cppcheck')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+  post {
+    always {
+      script {
+        def eSubject = JOB_NAME + ' - Build # ' + BUILD_ID + ' - ' + currentBuild.result + '!'
+        def eBody = "Hi,\n\n"
+        eBody += "Here are attached HTML report files for " + JOB_NAME + "  - Build # " + BUILD_ID + " - " + currentBuild.result + "!\n\n"
+        eBody += "Regards,\n"
+        eBody += "OAI CI Team"
+        emailext attachmentsPattern: '*results*.html',
+           body: eBody,
+           replyTo: 'no-reply@openairinterface.org',
+           subject: eSubject,
+           to: gitCommitAuthorEmailAddr
+
+        if (fileExists('.git/CI_COMMIT_MSG')) {
+          sh "rm -f .git/CI_COMMIT_MSG"
+        }
+      }
+    }
+    success {
+      script {
+        def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ")"
+        if ("MERGE".equals(env.gitlabActionType)) {
+          echo "This is a MERGE event"
+          addGitLabMRComment comment: message
+        }
+      }
+    }
+    failure {
+      script {
+        def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ")"
+        if ("MERGE".equals(env.gitlabActionType)) {
+          echo "This is a MERGE event"
+          addGitLabMRComment comment: message
+        }
+      }
+    }
+  }
+}
+
+// ----  Slave Job functions
+
+def triggerSlaveJob (jobName, gitlabStatusName) {
+  // Workaround for the "cancelled" GitLab pipeline notification
+  // The slave job is triggered with the propagate false so the following commands are executed
+  // Its status is now PASS/SUCCESS from a stage pipeline point of view
+  // localStatus variable MUST be analyzed to properly assess the status
+  localStatus = build job: jobName,
+    parameters: [
+      string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+      string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+      string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+      booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
+      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+    ], propagate: false
+  localResult = localStatus.getResult()
+  echo "${jobName} Slave Job status is ${localResult}"
+  gitlabCommitStatus(name: gitlabStatusName) {
+    if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
+       echo "${jobName} Slave Job is OK"
+    } else {
+       echo "${jobName} Slave Job is KO"
+       sh "ci-scripts/fail.sh"
+    }
+  }
+}
+
+def triggerSlaveJobNoGitLab (jobName) {
+  // Workaround for the "cancelled" GitLab pipeline notification
+  // The slave job is triggered with the propagate false so the following commands are executed
+  // Its status is now PASS/SUCCESS from a stage pipeline point of view
+  // localStatus variable MUST be analyzed to properly assess the status
+  localStatus = build job: jobName,
+    parameters: [
+      string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+      string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+      string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+      booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
+      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+    ], propagate: false
+  localResult = localStatus.getResult()
+  echo "${jobName} Slave Job status is ${localResult}"
+  if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
+     echo "${jobName} Slave Job is OK"
+  } else {
+     echo "${jobName} Slave Job is KO"
+     sh "ci-scripts/fail.sh"
+  }
+}
+
+def finalizeSlaveJob(jobName) {
+  // In case of any non-success, we are retrieving the HTML report of the last completed
+  // slave job. The only drop-back is that we may retrieve the HTML report of a previous build
+  fileName = "test_results-${jobName}.html"
+  if (!fileExists(fileName)) {
+    copyArtifacts(projectName: jobName,
+      filter: 'test_results*.html',
+      selector: lastCompleted())
+    if (fileExists(fileName)) {
+      sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' ${fileName}"
+      archiveArtifacts artifacts: fileName
+    }
+  }
+}

ci-scripts/Jenkinsfile-gitlab

@@ -30,12 +30,18 @@ def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
     }
 }
 
-def doRedHatBuild = false
 def doFlexranCtrlTest = false
 
 // Location of the executor node
 def nodeExecutor = params.nodeExecutor
 
+// VM Lockable resources
+def vmResource = params.vmLockableResource
+
+// Tags to shorten pipeline duration
+def doMandatoryTests = false
+def doFullTestsuite = false
+
 pipeline {
     agent {
         label nodeExecutor
@@ -44,31 +50,6 @@ pipeline {
         disableConcurrentBuilds()
         timestamps()
         gitLabConnection('OAI GitLab')
-        gitlabBuilds(builds: [
-            "Build gNB-USRP",
-            "Build nr-UE-USRP",
-            "Build eNB-USRP",
-            "Build basic-sim",
-            "Build phy-sim",
-            "Build eNB-ethernet",
-            "Build UE-ethernet",
-            "Analysis with cppcheck",
-            "Test phy-sim",
-            "Test basic-sim",
-            "Test L1-sim",
-            "Test RF-sim",
-            "Test L2-sim",
-            "Test-Mono-FDD-Band7",
-            "Test-Mono-TDD-Band40",
-            "Test-IF4p5-FDD-Band7",
-            "Test-IF4p5-TDD-Band40",
-            "Test-Mono-FDD-Band13-LTE-M",
-            "Test-IF4p5-TDD-Band38-Multi-RRU",
-            "Test-eNB-OAI-UE-FDD-Band7",
-            "Test-Mono-FDD-Band13-X2-HO",
-            "Test-TDD-Band78-gNB-NR-UE",
-            "Test-OCP-FDD-Band7"
-        ])
         ansiColor('xterm')
     }
 
@@ -85,27 +66,39 @@ pipeline {
                         echo "Platform is ${env.TESTPLATFORM_OWNER}"
                     }
 
-                    if (params.RedHatRemoteServer == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.RedHatRemoteCredentials == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.RedHatWorkingPath == null) {
-                        allParametersPresent = false
-                    }
-                    if (allParametersPresent) {
-                        echo "Performing Red Hat Build"
-                        doRedHatBuild = true
-                    } else {
-                        doRedHatBuild = false
-                    }
                     if (params.FlexRanRtcGitLabRepository_Credentials != null) {
                         doFlexranCtrlTest = true
                     }
                     if (fileExists("flexran")) {
                         sh "rm -Rf flexran > /dev/null 2>&1"
                     }
+
+                    echo '\u2705 \u001B[32mVerify Labels\u001B[0m'
+                    if ("MERGE".equals(env.gitlabActionType)) {
+                        LABEL_CHECK = sh returnStdout: true, script: 'ci-scripts/checkGitLabMergeRequestLabels.sh --mr-id ' + env.gitlabMergeRequestIid
+                        LABEL_CHECK = LABEL_CHECK.trim()
+                        if (LABEL_CHECK == 'NONE') {
+                            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Your merge request has none of the mandatory labels:\n\n"
+                            message += " - BUILD-ONLY\n"
+                            message += " - 4G-LTE\n"
+                            message += " - 5G-NR\n"
+                            message += " - CI\n\n"
+                            message += "Not performing CI due to lack of labels"
+                            addGitLabMRComment comment: message
+                            error('Not performing CI due to lack of labels')
+                        } else if (LABEL_CHECK == 'FULL') {
+                            doMandatoryTests = true
+                            doFullTestsuite = true
+                        } else if (LABEL_CHECK == 'SHORTEN-5G') {
+                            doMandatoryTests = true
+                        } else {
+                            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): We will perform only build stages on your Merge Request"
+                            addGitLabMRComment comment: message
+                        }
+                    } else {
+                        doMandatoryTests = true
+                        doFullTestsuite = true
+                    }
                 }
             }
         }
@@ -148,7 +141,7 @@ pipeline {
                         // For the moment, there is no fail criteria. Just a notification of number of files that do not follow
                         sh "./ci-scripts/checkCodingFormattingRules.sh"
                     }
-                    if (doFlexranCtrlTest) {
+                    if (doFlexranCtrlTest && doMandatoryTests) {
                         sh "mkdir flexran"
                         dir ('flexran') {
                             withCredentials([
@@ -175,83 +168,70 @@ pipeline {
 
         stage ("Start VM -- basic-sim") {
             steps {
+              lock (vmResource) {
                 timeout (time: 5, unit: 'MINUTES') {
                     sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
                 }
+              }
             }
         }
 
         stage ("Start VM -- gnb-usrp") {
             steps {
+              lock (vmResource) {
                 timeout (time: 5, unit: 'MINUTES') {
                     sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant gnb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
                 }
+              }
             }
         }
 
         stage ("Start VM -- nr-ue-usrp") {
             steps {
+              lock (vmResource) {
                 timeout (time: 5, unit: 'MINUTES') {
                     sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant nr-ue-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
                 }
-            }
-        }
-
-        stage ("Start VM -- enb-usrp") {
-            steps {
-                timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
-                }
+              }
             }
         }
 
         stage ("Start VM -- phy-sim") {
             steps {
+              lock (vmResource) {
                 timeout (time: 5, unit: 'MINUTES') {
                     sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
                 }
+              }
             }
         }
         
         stage ("Start VM -- enb-ethernet") {
             steps {
-                timeout (time: 5, unit: 'MINUTES') {
+              lock (vmResource) {
+                timeout (time: 7, unit: 'MINUTES') {
                     sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
                 }
+              }
             }
         }
 
         stage ("Start VM -- ue-ethernet") {
             steps {
-                timeout (time: 5, unit: 'MINUTES') {
+              lock (vmResource) {
+                timeout (time: 7, unit: 'MINUTES') {
                     sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
                 }
+              }
             }
         }
         
-        stage ("Start VM -- cppcheck") {
-            steps {
-                timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
-                }
-            }
-        }
-
         stage ("Variant Builds") {
             parallel {
-                stage ("Analysis with cppcheck") {
-                    steps {
-                        gitlabCommitStatus(name: "Analysis with cppcheck") {
-                            timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
-                            }
-                        }
-                    }
-                }
                 stage ("Build basic simulator") {
                     steps {
                         gitlabCommitStatus(name: "Build basic-sim") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 30, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -260,7 +240,7 @@ pipeline {
                 stage ("Build 5G gNB-USRP") {
                     steps {
                         gitlabCommitStatus(name: "Build gNB-USRP") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 30, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant gnb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -269,25 +249,16 @@ pipeline {
                 stage ("Build 5G NR-UE-USRP") {
                     steps {
                         gitlabCommitStatus(name: "Build nr-UE-USRP") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 30, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant nr-ue-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
                     }
                 }
-                stage ("Build eNB-USRP") {
-                    steps {
-                        gitlabCommitStatus(name: "Build eNB-USRP") {
-                            timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
-                            }
-                        }
-                    }
-                }
                 stage ("Build physical simulators") {
                     steps {
                         gitlabCommitStatus(name: "Build phy-sim") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 30, unit: 'MINUTES') {
                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -296,7 +267,7 @@ pipeline {
                 stage ("Build eNB-ethernet") {
                     steps {
                         gitlabCommitStatus(name: "Build eNB-ethernet") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 30, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -304,33 +275,14 @@ pipeline {
                 }
                 stage ("Build UE-ethernet") {
                     steps {
+                      // This is typically the last one to finish.
+                      lock (vmResource) {
                         gitlabCommitStatus(name: "Build UE-ethernet") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 30, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
-                    }
-                }
-                stage ("Build eNB-USRP on Red Hat") {
-                    when {
-                        expression {doRedHatBuild}
-                    }
-                    steps {
-                        gitlabCommitStatus(name: "Build eNB-USRP-RHE") {
-                            script {
-                                try {
-                                    withCredentials([
-                                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.RedHatRemoteCredentials}", usernameVariable: 'RH_Username', passwordVariable: 'RH_Password']
-                                    ]) {
-                                        timeout (time: 20, unit: 'MINUTES') {
-                                            sh "./ci-scripts/buildOnRH.sh --workspace $WORKSPACE --job-name ${JOB_NAME} --build-id ${BUILD_ID} --remote-host ${params.RedHatRemoteServer} --remote-path ${params.RedHatWorkingPath} --remote-user-name ${RH_Username} --remote-password ${RH_Password}"
-                                        }
-                                    }
-                                } catch (Exception e) {
-                                    echo "Red Hat build failed but we could keep running pipeline if all ubuntu-based build passed"
-                                }
-                            }
-                        }
+                      }
                     }
                 }
             }
@@ -344,9 +296,9 @@ pipeline {
                     script {
                         dir ('archives') {
                             if (fileExists('red_hat')) {
-                                sh "zip -r -qq vm_build_logs.zip basic_sim enb_usrp phy_sim cppcheck enb_eth ue_eth gnb_usrp nr_ue_usrp red_hat"
+                                sh "zip -r -qq vm_build_logs.zip basic_sim phy_sim enb_eth ue_eth gnb_usrp nr_ue_usrp red_hat"
                             } else {
-                                sh "zip -r -qq vm_build_logs.zip basic_sim enb_usrp phy_sim cppcheck enb_eth ue_eth gnb_usrp nr_ue_usrp"
+                                sh "zip -r -qq vm_build_logs.zip basic_sim phy_sim enb_eth ue_eth gnb_usrp nr_ue_usrp"
                             }
                         }
                         if(fileExists('archives/vm_build_logs.zip')) {
@@ -354,16 +306,6 @@ pipeline {
                         }
                         if ("MERGE".equals(env.gitlabActionType)) {
                             sh "./ci-scripts/oai-ci-vm-tool report-build --workspace $WORKSPACE --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
-                            // If the merge request has introduced more CPPCHECK errors or warnings, notifications in GitLab
-                            if (fileExists('oai_cppcheck_added_errors.txt')) {
-                                def ret=readFile('./oai_cppcheck_added_errors.txt').trim();
-                                if ("0".equals(ret)) {
-                                    echo "No added cppcheck warnings/errors in this merge request"
-                                } else {
-                                    def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Some modified files in Merge Request MAY have INTRODUCED up to " + ret + " CPPCHECK errors/warnings"
-                                    addGitLabMRComment comment: message
-                                }
-                            }
                             // If the merge request has introduced compilation warnings, notifications in GitLab
                             sh "./ci-scripts/checkAddedWarnings.sh --src-branch ${env.gitlabSourceBranch} --target-branch ${env.gitlabTargetBranch}"
                             def res=readFile('./oai_warning_files.txt').trim();
@@ -391,7 +333,11 @@ pipeline {
                 stage ("VM-based tests") {
                     stages {
                         stage ("Test physical simulators") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
+                              lock (vmResource) {
                                 script {
                                     timeout (time: 90, unit: 'MINUTES') {
                                         try {
@@ -403,13 +349,15 @@ pipeline {
                                         }
                                     }
                                 }
+                              }
                             }
                         }
                         stage ("Build Flexran Controller") {
                             when {
-                                expression {doFlexranCtrlTest}
+                                expression {doFlexranCtrlTest && doMandatoryTests}
                             }
                             steps {
+                              lock (vmResource) {
                                 script {
                                     timeout (time: 20, unit: 'MINUTES') {
                                         try {
@@ -419,10 +367,15 @@ pipeline {
                                         }
                                     }
                                 }
+                              }
                             }
                         }
                         stage ("Test basic simulator") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
+                              lock (vmResource) {
                                 script {
                                     timeout (time: 30, unit: 'MINUTES') {
                                         try {
@@ -434,10 +387,15 @@ pipeline {
                                         }
                                     }
                                 }
+                              }
                             }
                         }
                         stage ("Test L1 simulator") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
+                              lock (vmResource) {
                                 script {
                                     timeout (time: 30, unit: 'MINUTES') {
                                         try {
@@ -449,12 +407,17 @@ pipeline {
                                         }
                                     }
                                 }
+                              }
                             }
                         }
                         stage ("Test RF simulator") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
+                              lock (vmResource) {
                                 script {
-                                    timeout (time: 30, unit: 'MINUTES') {
+                                    timeout (time: 40, unit: 'MINUTES') {
                                         try {
                                             gitlabCommitStatus(name: "Test RF-sim") {
                                                 sh "./ci-scripts/oai-ci-vm-tool test --workspace $WORKSPACE --variant rf-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
@@ -464,10 +427,15 @@ pipeline {
                                         }
                                     }
                                 }
+                              }
                             }
                         }
                         stage ("Test L2 simulator") {
+                            when {
+                                expression {doFullTestsuite}
+                            }
                             steps {
+                              lock (vmResource) {
                                 script {
                                     timeout (time: 30, unit: 'MINUTES') {
                                         try {
@@ -479,16 +447,25 @@ pipeline {
                                         }
                                     }
                                 }
+                              }
                             }
                         }
                         stage ("Destroy all Virtual Machines") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
+                              lock (vmResource) {
                                 sh "./ci-scripts/oai-ci-vm-tool destroy --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                              }
                             }
                         }
                     }
                 }
                 stage ("Test MONOLITHIC - FDD - Band 7 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('eNB-CI-FDD-Band7-B210', 'Test-Mono-FDD-Band7')
@@ -508,6 +485,9 @@ pipeline {
                     }
                 }
                 stage ("Test MONOLITHIC - TDD - Band 40 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('eNB-CI-TDD-Band40-B210', 'Test-Mono-TDD-Band40')
@@ -527,6 +507,9 @@ pipeline {
                     }
                 }
                 stage ("Test IF4p5 - FDD - Band 7 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -547,6 +530,9 @@ pipeline {
                     }
                 }
                 stage ("Test IF4p5 - TDD - Band 40 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -567,6 +553,9 @@ pipeline {
                     }
                 }
                 stage ("Test MONOLITHIC - FDD - Band 13 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -587,6 +576,9 @@ pipeline {
                     }
                 }
                 stage ("Test X2 Handover - FDD - Band 13 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -607,6 +599,9 @@ pipeline {
                     }
                 }
                 stage ("Test IF4p5 - TDD - Band 38 - B210 - MultiRRU") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('eNB-CI-IF4p5-TDD-Band38-MultiRRU-B210', 'Test-IF4p5-TDD-Band38-Multi-RRU')
@@ -626,6 +621,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI UE - FDD - Band 20 - B200") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJobNoGitLab ('UE-CI-FDD-Band20-B200')
@@ -645,6 +643,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI UE - OAI eNB - FDD - Band 7 - B200") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             // Delayed trigger on slave job, so it is always the last one to run
@@ -666,6 +667,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI NR UE - OAI gNB - TDD - Band 78 - N300") {
+                    when {
+                        expression {doMandatoryTests}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('gNB-nrUE-MONO-TDD-Band78-N300', 'Test-TDD-Band78-gNB-NR-UE')
@@ -685,6 +689,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI OCP-eNB - FDD - Band 7 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('OCPeNB-FDD-Band7-B210', 'Test-OCP-FDD-Band7')
@@ -707,6 +714,7 @@ pipeline {
             post {
                 always {
                     script {
+                      if (doMandatoryTests) {
                         dir ('archives') {
                             sh "if [ -d basic_sim/test ] || [ -d phy_sim/test ] || [ -d l2_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
                         }
@@ -722,6 +730,7 @@ pipeline {
                                 archiveArtifacts artifacts: 'test_simulator_results.html'
                             }
                         }
+                      }
                     }
                 }
             }

ci-scripts/Jenkinsfile-tmp-full-ran

@@ -266,6 +266,42 @@ pipeline {
         }
         stage('Log Collection') {
             parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (OAI UE - Build)') {
+                    steps {
+                        echo '\u2705 \u001B[32mLog Collection (OAI UE - Build)\u001B[0m'
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.UE_Credentials}", usernameVariable: 'UE_Username', passwordVariable: 'UE_Password']
+                        ]) {
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --UEIPAddress=${params.UE_IPAddress} --UEUserName=${UE_Username} --UEPassword=${UE_Password} --UESourceCodePath=${params.UE_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (UE - Build)\u001B[0m'
+                            sh "sshpass -p \'${UE_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${UE_Username}@${params.UE_IPAddress}:${UE_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
                 stage('Log Collection (eNB - Run)') {
                     steps {
                         withCredentials([

ci-scripts/Jenkinsfile-tmp-multi-enb-benetel

@@ -0,0 +1,293 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the phone resource
+def ciSmartPhonesResource1 = params.SmartPhonesResource1
+def ciSmartPhonesResource2 = params.SmartPhonesResource2
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess
+def eNB_TargetBranch
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    options {
+        disableConcurrentBuilds()
+        ansiColor('xterm')
+        lock(extra: [[resource: ciSmartPhonesResource2]], resource: ciSmartPhonesResource1)
+    }
+    stages {
+        stage("Build Init") {
+            steps {
+                // update the build name and description
+                buildName "${params.eNB_MR}"
+                buildDescription "Branch : ${params.eNB_Branch}"
+            }
+        }
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    // It is already to late to check it
+                    if (params.pythonExecutor != null) {
+                        echo "eNB CI executor node  :   ${pythonExecutor}"
+                    }
+                    // If not present picking a default Stage Name
+                    if (params.pipelineTestStageName == null) {
+                        // picking default
+                        testStageName = 'Template Test Stage'
+                    }
+
+                    if (params.SmartPhonesResource1 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource2 == null) {
+                        allParametersPresent = false
+                    }
+                    // 1st eNB parameters
+                    if (params.eNB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 2nd eNB parameters
+                    if (params.eNB1_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 3rd eNB parameters
+                    if (params.eNB2_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // the following 4 parameters should be pushed by the master trigger
+                    // if not present, take the job GIT variables (used for developing)
+                    if (params.eNB_Repository == null) {
+                        eNB_Repository = env.GIT_URL
+                    } else {
+                        eNB_Repository = params.eNB_Repository
+                    }
+                    echo "eNB_Repository        :   ${eNB_Repository}"
+                    if (params.eNB_Branch == null) {
+                        eNB_Branch = env.GIT_BRANCH
+                    } else {
+                        eNB_Branch = params.eNB_Branch
+                    }
+                    echo "eNB_Branch            :   ${eNB_Branch}"
+                    if (params.eNB_CommitID == null) {
+                        eNB_CommitID = env.GIT_COMMIT
+                    } else {
+                        eNB_CommitID = params.eNB_CommitID
+                    }
+                    echo "eNB_CommitID          :   ${eNB_CommitID}"
+                    if (params.eNB_AllowMergeRequestProcess!= null) {
+                        eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
+                        if (eNB_AllowMergeRequestProcess) {
+                            if (params.eNB_TargetBranch != null) {
+                                eNB_TargetBranch = params.eNB_TargetBranch
+                            } else {
+                                eNB_TargetBranch = 'develop'
+                            }
+                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+                        }
+                    }
+
+                    if (params.EPC_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Type == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (params.ADB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.ADB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (allParametersPresent) {
+                        echo "All parameters are present"
+                        if (eNB_AllowMergeRequestProcess) {
+                            sh "git fetch"
+                            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+                        } else {
+                            sh "git fetch"
+                            sh "git checkout -f ${eNB_CommitID}"
+                        }
+                    } else {
+                        echo "Some parameters are missing"
+                        sh "./ci-scripts/fail.sh"
+                    }
+                }
+            }
+        }
+        stage ("Build and Test") {
+            steps {
+                script {
+                    dir ('ci-scripts') {
+                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                        // If not present picking a default XML file
+                        if (params.pythonTestXmlFile == null) {
+                            // picking default
+                            testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                            echo "Test XML file(default):   ${testXMLFile}"
+                            mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+                        } else {
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                                    echo "Test XML file         :   ${xmlFile}"
+                                }
+                            }
+                        }
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    try {
+                                        sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                        buildStageStatus = false
+                                    }
+                                }
+                            }
+                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        }
+                    }
+                }
+            }
+        }
+        stage('Log Collection') {
+            parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (eNB - Run)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
+                            }
+                            if(fileExists("ci-scripts/test_results.html")) {
+                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+                                archiveArtifacts "test_results-${JOB_NAME}.html"
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    post {
+        always {
+            script {
+                if (params.pipelineZipsConsoleLog != null) {
+                    if (params.pipelineZipsConsoleLog) {
+                        echo "Archiving Jenkins console log"
+                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
+                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
+                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
+                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

ci-scripts/Jenkinsfile-tmp-multi-enb-nsa

@@ -0,0 +1,297 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the phone resource
+def ciSmartPhonesResource1 = params.SmartPhonesResource1
+def ciSmartPhonesResource2 = params.SmartPhonesResource2
+def ciSmartPhonesResource3 = params.SmartPhonesResource3
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess
+def eNB_TargetBranch
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    options {
+        disableConcurrentBuilds()
+        ansiColor('xterm')
+        lock(extra: [[resource: ciSmartPhonesResource2],[resource: ciSmartPhonesResource3]], resource: ciSmartPhonesResource1)
+    }
+    stages {
+        stage("Build Init") {
+            steps {
+                // update the build name and description
+                buildName "${params.eNB_MR}"
+                buildDescription "Branch : ${params.eNB_Branch}"
+            }
+        }
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    // It is already to late to check it
+                    if (params.pythonExecutor != null) {
+                        echo "eNB CI executor node  :   ${pythonExecutor}"
+                    }
+                    // If not present picking a default Stage Name
+                    if (params.pipelineTestStageName == null) {
+                        // picking default
+                        testStageName = 'Template Test Stage'
+                    }
+
+                    if (params.SmartPhonesResource1 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource2 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource3== null) {
+                        allParametersPresent = false
+                    }
+                    // 1st eNB parameters
+                    if (params.eNB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 2nd eNB parameters
+                    if (params.eNB1_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 3rd eNB parameters
+                    if (params.eNB2_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // the following 4 parameters should be pushed by the master trigger
+                    // if not present, take the job GIT variables (used for developing)
+                    if (params.eNB_Repository == null) {
+                        eNB_Repository = env.GIT_URL
+                    } else {
+                        eNB_Repository = params.eNB_Repository
+                    }
+                    echo "eNB_Repository        :   ${eNB_Repository}"
+                    if (params.eNB_Branch == null) {
+                        eNB_Branch = env.GIT_BRANCH
+                    } else {
+                        eNB_Branch = params.eNB_Branch
+                    }
+                    echo "eNB_Branch            :   ${eNB_Branch}"
+                    if (params.eNB_CommitID == null) {
+                        eNB_CommitID = env.GIT_COMMIT
+                    } else {
+                        eNB_CommitID = params.eNB_CommitID
+                    }
+                    echo "eNB_CommitID          :   ${eNB_CommitID}"
+                    if (params.eNB_AllowMergeRequestProcess!= null) {
+                        eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
+                        if (eNB_AllowMergeRequestProcess) {
+                            if (params.eNB_TargetBranch != null) {
+                                eNB_TargetBranch = params.eNB_TargetBranch
+                            } else {
+                                eNB_TargetBranch = 'develop'
+                            }
+                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+                        }
+                    }
+
+                    if (params.EPC_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Type == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (params.ADB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.ADB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (allParametersPresent) {
+                        echo "All parameters are present"
+                        if (eNB_AllowMergeRequestProcess) {
+                            sh "git fetch"
+                            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+                        } else {
+                            sh "git fetch"
+                            sh "git checkout -f ${eNB_CommitID}"
+                        }
+                    } else {
+                        echo "Some parameters are missing"
+                        sh "./ci-scripts/fail.sh"
+                    }
+                }
+            }
+        }
+        stage ("Build and Test") {
+            steps {
+                script {
+                    dir ('ci-scripts') {
+                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                        // If not present picking a default XML file
+                        if (params.pythonTestXmlFile == null) {
+                            // picking default
+                            testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                            echo "Test XML file(default):   ${testXMLFile}"
+                            mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+                        } else {
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                                    echo "Test XML file         :   ${xmlFile}"
+                                }
+                            }
+                        }
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    try {
+                                        sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                        buildStageStatus = false
+                                    }
+                                }
+                            }
+                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        }
+                    }
+                }
+            }
+        }
+        stage('Log Collection') {
+            parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (eNB - Run)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
+                            }
+                            if(fileExists("ci-scripts/test_results.html")) {
+                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+                                archiveArtifacts "test_results-${JOB_NAME}.html"
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    post {
+        always {
+            script {
+                if (params.pipelineZipsConsoleLog != null) {
+                    if (params.pipelineZipsConsoleLog) {
+                        echo "Archiving Jenkins console log"
+                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
+                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
+                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
+                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

ci-scripts/Jenkinsfile-tmp-ran

@@ -241,6 +241,10 @@ pipeline {
         stage ("Terminate") {
             parallel {
                 stage('Terminate UE') {
+                    // Bypassing this stage if there are no abd server defined
+                    when {
+                      expression { params.ADB_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate UE\u001B[0m'
                         withCredentials([
@@ -275,6 +279,10 @@ pipeline {
                     }
                 }
                 stage('Terminate SPGW') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate SPGW\u001B[0m'
                         withCredentials([
@@ -292,6 +300,10 @@ pipeline {
                     }
                 }
                 stage('Terminate MME') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate MME\u001B[0m'
                         withCredentials([
@@ -309,6 +321,10 @@ pipeline {
                     }
                 }
                 stage('Terminate HSS') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate HSS\u001B[0m'
                         withCredentials([
@@ -371,6 +387,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (SPGW)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -389,6 +409,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (MME)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -407,6 +431,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (HSS)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -425,6 +453,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (Ping)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -443,6 +475,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (Iperf)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -482,7 +518,7 @@ pipeline {
         // Making sure that we really shutdown every thing before leaving
         failure {
             script {
-                if (!termStatusArray[termUE]) {
+                if ((!termStatusArray[termUE]) && (params.ADB_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
                     ]) {
@@ -496,21 +532,21 @@ pipeline {
                         sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
                     }
                 }
-                if (!termStatusArray[termSPGW]) {
+                if ((!termStatusArray[termSPGW]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {
                         sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
                     }
                 }
-                if (!termStatusArray[termMME]) {
+                if ((!termStatusArray[termMME]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {
                         sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
                     }
                 }
-                if (!termStatusArray[termHSS]) {
+                if ((!termStatusArray[termHSS]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {

ci-scripts/Jenkinsfile-trig-nsa

@@ -0,0 +1,73 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+def TARGET_BRANCH = "develop"
+def ALLOW_MERGE = true
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    stages {
+        stage ("Launcher") {
+            steps {
+                script {     
+                    //retrieve MR that are opened nd with tag READY_TO_BE_MERGED             
+                    MR_LIST= sh returnStdout: true, script: 'curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests?state=opened&per_page=100&labels=READY_TO_BE_MERGED" | jq ".[].iid" || true '
+                    echo "List of selected MR:\n${MR_LIST}" 
+                    def MR_ARRAY = MR_LIST.split('\n') 
+                    //for every selected MR, retrieve the branch name and the latest commit              
+                    for (MR in MR_ARRAY) {
+                        SRC_BRANCH=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".source_branch" || true """
+                        SRC_BRANCH=SRC_BRANCH.trim()
+                        COMMIT_ID=sh returnStdout: true, script:  """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".sha" || true """
+                        COMMIT_ID=COMMIT_ID.trim()
+                        echo "Testing NSA on : ${MR} ${SRC_BRANCH} ${COMMIT_ID}"
+                        //calling NSA sub job
+                        build job: "RAN-CI-NSA-B210", wait : false, propagate : false, parameters: [
+                            string(name: 'eNB_MR', value: String.valueOf(MR)),                          
+                            string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
+                            string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
+                            string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
+                            booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
+                        ]
+                        //calling Benetel sub job
+                        build job: "RAN-CI-BENETEL", wait : false, propagate : false, parameters: [
+                            string(name: 'eNB_MR', value: String.valueOf(MR)),                          
+                            string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
+                            string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
+                            string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
+                            booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
+                        ]
+                    }
+                }                                  
+            }   
+        }
+    }
+}
+
+

ci-scripts/args_parse.py

@@ -41,7 +41,7 @@ import constants as CONST
 #-----------------------------------------------------------
 
 
-def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
+def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA):
 
 
     py_param_file_present = False
@@ -79,6 +79,8 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranRepository=matchReg.group(1)
             HTML.ranRepository=matchReg.group(1)
             ldpc.ranRepository=matchReg.group(1)
+            CONTAINERS.ranRepository=matchReg.group(1)
+            SCA.ranRepository=matchReg.group(1)
         elif re.match('^\-\-eNB_AllowMerge=(.+)$|^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE)
@@ -90,6 +92,8 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
                 CiTestObj.ranAllowMerge = True
                 RAN.ranAllowMerge=True
                 HTML.ranAllowMerge=True
+                CONTAINERS.ranAllowMerge=True
+                SCA.ranAllowMerge=True
         elif re.match('^\-\-eNBBranch=(.+)$|^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE)
@@ -99,6 +103,8 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranBranch=matchReg.group(1)
             HTML.ranBranch=matchReg.group(1)
             ldpc.ranBranch=matchReg.group(1)
+            CONTAINERS.ranBranch=matchReg.group(1)
+            SCA.ranBranch=matchReg.group(1)
         elif re.match('^\-\-eNBCommitID=(.*)$|^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE)
@@ -108,6 +114,8 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranCommitID=matchReg.group(1)
             HTML.ranCommitID=matchReg.group(1)
             ldpc.ranCommitID=matchReg.group(1)
+            CONTAINERS.ranCommitID=matchReg.group(1)
+            SCA.ranCommitID=matchReg.group(1)
         elif re.match('^\-\-eNBTargetBranch=(.*)$|^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE)
@@ -117,50 +125,68 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranTargetBranch=matchReg.group(1)
             HTML.ranTargetBranch=matchReg.group(1)
             ldpc.ranTargetBranch=matchReg.group(1)
+            CONTAINERS.ranTargetBranch=matchReg.group(1)
+            SCA.ranTargetBranch=matchReg.group(1)
         elif re.match('^\-\-eNBIPAddress=(.+)$|^\-\-eNB[1-2]IPAddress=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBIPAddress=matchReg.group(1)
                 ldpc.eNBIpAddr=matchReg.group(1)
+                CONTAINERS.eNBIPAddress=matchReg.group(1)
+                SCA.eNBIPAddress=matchReg.group(1)
             elif re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1IPAddress=matchReg.group(1)
+                CONTAINERS.eNB1IPAddress=matchReg.group(1)
             elif re.match('^\-\-eNB2IPAddress=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2IPAddress=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2IPAddress=matchReg.group(1)
+                CONTAINERS.eNB2IPAddress=matchReg.group(1)
         elif re.match('^\-\-eNBUserName=(.+)$|^\-\-eNB[1-2]UserName=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBUserName=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBUserName=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBUserName=matchReg.group(1)
                 ldpc.eNBUserName=matchReg.group(1)
+                CONTAINERS.eNBUserName=matchReg.group(1)
+                SCA.eNBUserName=matchReg.group(1)
             elif re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1UserName=matchReg.group(1)
+                CONTAINERS.eNB1UserName=matchReg.group(1)
             elif re.match('^\-\-eNB2UserName=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2UserName=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2UserName=matchReg.group(1)
+                CONTAINERS.eNB2UserName=matchReg.group(1)
         elif re.match('^\-\-eNBPassword=(.+)$|^\-\-eNB[1-2]Password=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBPassword=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBPassword=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBPassword=matchReg.group(1)
                 ldpc.eNBPassWord=matchReg.group(1)
+                CONTAINERS.eNBPassword=matchReg.group(1)
+                SCA.eNBPassword=matchReg.group(1)
             elif re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1Password=matchReg.group(1)
+                CONTAINERS.eNB1Password=matchReg.group(1)
             elif re.match('^\-\-eNB2Password=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2Password=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2Password=matchReg.group(1)
+                CONTAINERS.eNB2Password=matchReg.group(1)
         elif re.match('^\-\-eNBSourceCodePath=(.+)$|^\-\-eNB[1-2]SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBSourceCodePath=matchReg.group(1)
                 ldpc.eNBSourceCodePath=matchReg.group(1)
+                CONTAINERS.eNBSourceCodePath=matchReg.group(1)
+                SCA.eNBSourceCodePath=matchReg.group(1)
             elif re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1SourceCodePath=matchReg.group(1)
+                CONTAINERS.eNB1SourceCodePath=matchReg.group(1)
             elif re.match('^\-\-eNB2SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2SourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2SourceCodePath=matchReg.group(1)
+                CONTAINERS.eNB2SourceCodePath=matchReg.group(1)
         elif re.match('^\-\-EPCIPAddress=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-EPCIPAddress=(.+)$', myArgv, re.IGNORECASE)
             EPC.IPAddress=matchReg.group(1)

ci-scripts/buildOnRH.sh

@@ -1,216 +0,0 @@
-#!/bin/bash
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
-
-function usage {
-    echo "OAI RedHat Build Check script"
-    echo "   Original Author: Raphael Defosseux"
-
-    echo ""
-    echo "Usage:"
-    echo "------"
-    echo "    buildOnRH.sh [OPTIONS]"
-    echo ""
-    echo "Options:"
-    echo "--------"
-    echo "    --job-name #### OR -jn ####"
-    echo "    Specify the name of the Jenkins job."
-    echo ""
-    echo "    --build-id #### OR -id ####"
-    echo "    Specify the build ID of the Jenkins job."
-    echo ""
-    echo "    --workspace #### OR -ws ####"
-    echo "    Specify the workspace."
-    echo ""
-    echo "    --remote-host #### OR -rh ####"
-    echo "    Specify the RedHat remote server."
-    echo ""
-    echo "    --remote-user-name #### OR -ru ####"
-    echo "    Specify the RedHat remote server username."
-    echo ""
-    echo "    --remote-password #### OR -rp ####"
-    echo "    Specify the RedHat remote server password."
-    echo ""
-    echo "    --remote-path #### OR -ra ####"
-    echo "    Specify the RedHat remote server path to work on."
-    echo ""
-}
-
-if [ $# -lt 1 ] || [ $# -gt 14 ]
-then
-    echo "Syntax Error: not the correct number of arguments"
-    echo ""
-    usage
-    exit 1
-fi
-
-RH_HOST=XX
-RH_USER=XX
-RH_PASSWD=XX
-RH_PATH=XX
-JOB_NAME=XX
-BUILD_ID=XX
-
-while [[ $# -gt 0 ]]
-do
-key="$1"
-
-case $key in
-    -h|--help)
-    shift
-    usage
-    exit 0
-    ;;
-    -jn|--job-name)
-    JOB_NAME="$2"
-    shift
-    shift
-    ;;
-    -id|--build-id)
-    BUILD_ID="$2"
-    shift
-    shift
-    ;;
-    -ws|--workspace)
-    JENKINS_WKSP="$2"
-    shift
-    shift
-    ;;
-    -rh|--remote-host)
-    RH_HOST="$2"
-    shift
-    shift
-    ;;
-    -ru|--remote-user-name)
-    RH_USER="$2"
-    shift
-    shift
-    ;;
-    -rp|--remote-password)
-    RH_PASSWD="$2"
-    shift
-    shift
-    ;;
-    -ra|--remote-path)
-    RH_PATH="$2"
-    shift
-    shift
-    ;;
-    *)
-    echo "Syntax Error: unknown option: $key"
-    echo ""
-    usage
-    exit 1
-esac
-done
-
-if [ ! -f $JENKINS_WKSP/localZip.zip ]
-then
-    echo "Missing localZip.zip file!"
-    exit 1
-fi
-
-if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ] || [ "$RH_HOST" == "XX" ] || [ "$RH_USER" == "XX" ] || [ "$RH_PASSWD" == "XX" ] || [ "$RH_PATH" == "XX" ]
-then
-    echo "Missing options"
-    usage
-    exit 1
-fi
-
-echo "############################################################"
-echo "Copying GIT repo into RedHat Server" 
-echo "############################################################"
-echo "rm -Rf ${RH_PATH}" >> rh-cmd.txt
-echo "mkdir -p ${RH_PATH}" >> rh-cmd.txt
-
-sshpass -p ${RH_PASSWD} ssh -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST} < rh-cmd.txt
-rm -f rh-cmd.txt
-
-echo "############################################################"
-echo "Running install and build script on RedHat Server"
-echo "############################################################"
-sshpass -p ${RH_PASSWD} scp -o 'StrictHostKeyChecking no' $JENKINS_WKSP/localZip.zip ${RH_USER}@${RH_HOST}:${RH_PATH}
-
-echo "cd ${RH_PATH}" > rh-cmd.txt
-echo "unzip -qq localZip.zip" >> rh-cmd.txt
-echo "source oaienv" >> rh-cmd.txt
-echo "cd cmake_targets" >> rh-cmd.txt
-echo "mkdir -p log" >> rh-cmd.txt
-echo "./build_oai -I -w USRP --eNB > log/install-build.txt 2>&1" >> rh-cmd.txt
-sshpass -p ${RH_PASSWD} ssh -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST} < rh-cmd.txt
-
-rm -f rh-cmd.txt
-
-echo "############################################################"
-echo "Creating a tmp folder to store results and artifacts"
-echo "############################################################"
-if [ ! -d $JENKINS_WKSP/archives ]
-then
-    mkdir -p $JENKINS_WKSP/archives
-fi
-
-ARCHIVES_LOC=$JENKINS_WKSP/archives/red_hat
-if [ ! -d $ARCHIVES_LOC ]
-then
-    mkdir -p $ARCHIVES_LOC
-fi
-
-sshpass -p ${RH_PASSWD} scp -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST}:${RH_PATH}/cmake_targets/log/*.txt $ARCHIVES_LOC
-
-echo "############################################################"
-echo "Checking build status" 
-echo "############################################################"
-
-LOG_PATTERN=.Rel15.txt
-NB_PATTERN_FILES=7
-
-LOG_FILES=`ls $ARCHIVES_LOC/*.txt`
-STATUS=0
-NB_FOUND_FILES=0
-
-for FULLFILE in $LOG_FILES
-do
-    if [[ $FULLFILE == *"$LOG_PATTERN"* ]]
-    then
-        filename=$(basename -- "$FULLFILE")
-        PASS_PATTERN=`echo $filename | sed -e "s#$LOG_PATTERN##"`
-        LOCAL_STAT=`egrep -c "Built target $PASS_PATTERN" $FULLFILE`
-        if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
-        NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
-    fi
-done
-
-if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]
-then
-    echo "Expecting $NB_PATTERN_FILES log files and found $NB_FOUND_FILES"
-    STATUS=-1
-fi
-
-echo "COMMAND: build_oai -I -w USRP --eNB" > $ARCHIVES_LOC/build_final_status.log
-if [ $STATUS -eq 0 ]
-then
-    echo "BUILD_OK" >> $ARCHIVES_LOC/build_final_status.log
-    echo "STATUS seems OK"
-else
-    echo "BUILD_KO" >> $ARCHIVES_LOC/build_final_status.log
-    echo "STATUS failed?"
-fi
-exit $STATUS

ci-scripts/buildOnVM.sh

@@ -62,6 +62,12 @@ function build_on_vm {
     echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
     echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
 
+    if [[ "$VM_NAME" == *"-enb-usrp"* ]] || [[ "$VM_NAME" == *"-cppcheck"* ]]
+    then
+        echo "This VM type is no longer supported in the pipeline framework"
+        return
+    fi
+
     IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
 
     if [ $IS_VM_ALIVE -eq 0 ]
@@ -158,6 +164,9 @@ function build_on_vm {
     echo "cd tmp" >> $VM_CMDS
     echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $VM_CMDS
     echo "unzip -qq -DD ../localZip.zip" >> $VM_CMDS
+    # Trying to make some room on filesystem before building
+    echo "rm ../localZip.zip" >> $VM_CMDS
+    echo "export CI_ENV=True" >> $VM_CMDS
     if [[ "$VM_NAME" == *"-cppcheck"* ]]
     then
         echo "mkdir cmake_targets/log" >> $VM_CMDS
@@ -178,6 +187,8 @@ function build_on_vm {
         echo "mkdir -p cmake_targets/log" >> $VM_CMDS
         echo "chmod 777 cmake_targets/log" >> $VM_CMDS
         echo "cp /home/ubuntu/zip-install.txt cmake_targets/log" >> $VM_CMDS
+        # Patching the pistache build for Xenial (cmake too old for new commits)
+        echo "sed -i -e 's@cd pistache@cd pistache \&\& git checkout -f 9a65f40975fafca5bb5370ba6d0d00f42cbc4356@' ./tools/install_dependencies" >> $VM_CMDS
         echo "echo \"./tools/install_dependencies \"" >> $VM_CMDS
         echo "./tools/install_dependencies > cmake_targets/log/install-build.txt 2>&1" >> $VM_CMDS
         echo "echo \"mkdir build\"" >> $VM_CMDS
@@ -206,7 +217,15 @@ function build_on_vm {
             echo "echo \"./build_oai -I $BUILD_OPTIONS \"" >> $VM_CMDS
             echo "./build_oai -I $BUILD_OPTIONS > log/install-build.txt 2>&1" >> $VM_CMDS
         else
-            echo "echo \"./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            if [[ "$VM_NAME" == *"-enb-ethernet"* ]]
+            then
+                echo "echo \"sleep 170 && ./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            elif [[ "$VM_NAME" == *"-ue-ethernet"* ]]
+            then
+                echo "echo \"sleep 60 && ./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            else
+                echo "echo \"./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            fi
             echo "chmod 775 ./my-vm-build.sh " >> $VM_CMDS
             echo "echo \"sudo -E daemon --inherit --unsafe --name=build_daemon --chdir=/home/ubuntu/tmp/cmake_targets -o /home/ubuntu/tmp/cmake_targets/log/install-build.txt ./my-vm-build.sh\"" >> $VM_CMDS
             echo "sudo -E daemon --inherit --unsafe --name=build_daemon --chdir=/home/ubuntu/tmp/cmake_targets -o /home/ubuntu/tmp/cmake_targets/log/install-build.txt ./my-vm-build.sh" >> $VM_CMDS

ci-scripts/build_fr1_from_yaml.py

@@ -0,0 +1,83 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+"""
+Created on Tue Jul  7 23:04:51 2020
+
+@author: hardy
+"""
+
+
+
+import yaml
+import sys
+import subprocess
+
+      
+
+def main():
+  f_yaml=sys.argv[1]
+  f_sh=sys.argv[2]
+  #filename='py_params_template.yaml'
+  with open(f_yaml,'r') as file:
+    # The FullLoader parameter handles the conversion from YAML
+    # scalar values to Python the dictionary format
+    print('Loading '+f_yaml)
+    params = yaml.load(file,Loader=yaml.FullLoader)
+
+
+  with open(f_sh,'w') as f:
+    f.write('#!/bin/sh\n')
+    for i in range (0, len(params['steps'])):
+      step=params['steps'][i].split(',')
+      mode=step[0]
+      f_xml=step[1]
+      line='python3 main.py ' + \
+           '--mode='+ mode + ' ' + \
+           '--ranRepository=' + params['ranRepository'] + ' ' + \
+           '--ranBranch=' + params['ranBranch'] + ' ' + \
+           '--ranCommitID=' + params['ranCommitID'] + ' ' + \
+           '--ranAllowMerge=' + params['ranAllowMerge'] + ' ' + \
+           '--ranTargetBranch=' + params['ranTargetBranch'] + ' ' + \
+           \
+           '--ADBIPAddress=' + params['ADB']['ADBIPAddress'] + ' ' + \
+           '--ADBUserName=' + params['ADB']['ADBUserName'] + ' ' + \
+           '--ADBPassword=' + params['ADB']['ADBPassword'] + ' ' + \
+           \
+           '--UEIPAddress=' + params['UE']['UEIPAddress'] + ' ' + \
+           '--UEUserName=' + params['UE']['UEUserName'] + ' ' + \
+           '--UEPassword=' + params['UE']['UEPassword'] + ' ' + \
+           '--UESourceCodePath=' + params['UE']['UESourceCodePath'] + ' ' + \
+           \
+           '--EPCIPAddress=' + params['EPC']['EPCIPAddress'] + ' ' + \
+           '--EPCUserName=' + params['EPC']['EPCUserName'] + ' ' + \
+           '--EPCPassword=' + params['EPC']['EPCPassword'] + ' ' + \
+           '--EPCSourceCodePath=' + params['EPC']['EPCSourceCodePath'] + ' ' + \
+           '--EPCType=' + params['EPC']['EPCType'] + ' ' + \
+           \
+           '--eNBIPAddress=' + params['RAN'][0]['eNBIPAddress'] + ' ' + \
+           '--eNBUserName=' + params['RAN'][0]['eNBUserName'] + ' ' + \
+           '--eNBPassword=' + params['RAN'][0]['eNBPassword'] + ' ' + \
+           '--eNBSourceCodePath=' + params['RAN'][0]['eNBSourceCodePath'] + ' ' + \
+           \
+           '--eNB1IPAddress=' + params['RAN'][1]['eNB1IPAddress'] + ' ' + \
+           '--eNB1UserName=' + params['RAN'][1]['eNB1UserName'] + ' ' + \
+           '--eNB1Password=' + params['RAN'][1]['eNB1Password'] + ' ' + \
+           '--eNB1SourceCodePath=' + params['RAN'][1]['eNB1SourceCodePath'] + ' '
+      if mode!="InitiateHtml":
+         line+='--XMLTestFile=' + f_xml
+      #if mode is InitiateHTML we have a special processing to mention all xml files from the list
+      #loop starting at 1 to avoid the xml file mentioned with InitiateHtml in yaml file (file is none)
+      else:
+         for i in range (1, len(params['steps'])):
+            step=params['steps'][i].split(',')
+            f_xml=step[1]
+            line+='--XMLTestFile=' + f_xml+' '
+      line+='\n'
+      print(line)
+      f.write(line)
+  subprocess.call(['chmod','777',f_sh])
+
+if __name__ == "__main__":
+    main()
+
+

ci-scripts/build_fr1_template.yaml

@@ -0,0 +1,46 @@
+
+ranRepository : https://gitlab.eurecom.fr/oai/openairinterface5g.git
+ranBranch : BRANCH_NAME 
+ranCommitID : COMMIT_ID 
+ranAllowMerge : 'true' 
+ranTargetBranch : develop
+
+steps:
+  - InitiateHtml,none
+  - TesteNB,xml_files/fr1_multi_node_build.xml
+  - TesteNB,xml_files/fr1_epc_start.xml
+  - TesteNB,xml_files/fr1_ran_ue_base.xml #ue toggle, nodes initialize, ue toggle, ping, nodes terminate
+  - TesteNB,xml_files/fr1_epc_closure.xml
+
+
+ADB: #on Caracal
+  ADBIPAddress : 192.168.18.196
+  ADBUserName : oaici
+  ADBPassword : KkexF6CErOi1fNuebCPsuIVK
+
+RAN:
+    - eNBIPAddress : 192.168.18.199 #eNB on Minimassive
+      eNBUserName : oaicicd
+      eNBPassword : HzB*nkryaITdVd08TKlT#2Z5a!7M#~qn
+      eNBSourceCodePath : /tmp/CI-FR1-eNB
+    - eNB1IPAddress : 192.168.18.198 #gNB on Mozart
+      eNB1UserName : oaicicd
+      eNB1Password : 7zkDOFgh@w3HvRBMPTMh@BAx
+      eNB1SourceCodePath : /tmp/CI-FR1-gNB
+
+
+EPC: #on Nikaia 
+  EPCIPAddress : 192.168.18.99
+  EPCUserName : nikaia
+  EPCPassword : linux
+  EPCSourceCodePath : /tmp/CI-FR1-EPC
+  EPCType : ltebox
+
+
+UE:
+  UEIPAddress : none
+  UEUserName : none
+  UEPassword : none
+  UESourceCodePath : none
+
+

ci-scripts/checkCodingFormattingRules.sh

@@ -59,7 +59,7 @@ if [ $# -eq 0 ]
 then
     echo " ---- Checking the whole repository ----"
     echo ""
-    NB_FILES_TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt --recursive *.c *.h | grep -c Formatted `
+    NB_FILES_TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt --recursive *.c *.h | grep -c Formatted || true`
     echo "Nb Files that do NOT follow OAI rules: $NB_FILES_TO_FORMAT"
     echo $NB_FILES_TO_FORMAT > ./oai_rules_result.txt
 
@@ -67,17 +67,17 @@ then
     awk '/#[ \t]*ifndef/ { gsub("^.*ifndef *",""); if (names[$1]!="") print "files with same {define ", FILENAME, names[$1]; names[$1]=FILENAME } /#[ \t]*define/ { gsub("^.*define *",""); if(names[$1]!=FILENAME) print "error in declaration", FILENAME, $1, names[$1]; nextfile }' `find openair* common targets executables -name *.h |grep -v LFDS` > header-files-w-incorrect-define.txt
 
     # Testing if explicit GNU GPL license banner
-    egrep -irl --exclude-dir=.git --include=*.cpp --include=*.c --include=*.h "General Public License" . > files-w-gnu-gpl-license-banner.txt
+    egrep -irl --exclude-dir=.git --include=*.cpp --include=*.c --include=*.h "General Public License" . | egrep -v "openair3/NAS/COMMON/milenage.h" > files-w-gnu-gpl-license-banner.txt
 
     # Looking at exotic/suspect banner
     LIST_OF_FILES_W_BANNER=`egrep -irl --exclude-dir=.git --include=*.cpp --include=*.c --include=*.h "Copyright|copyleft" .`
     if [ -f ./files-w-suspect-banner.txt ]; then rm -f ./files-w-suspect-banner.txt; fi
     for FILE in $LIST_OF_FILES_W_BANNER
     do
-       IS_NFAPI=`echo $FILE | egrep -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext"`
-       IS_OAI_LICENCE_PRESENT=`egrep -c "OAI Public License" $FILE`
-       IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence" $FILE`
-       IS_EXCEPTION=`echo $FILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h"`
+       IS_NFAPI=`echo $FILE | egrep -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext" || true`
+       IS_OAI_LICENCE_PRESENT=`egrep -c "OAI Public License" $FILE || true`
+       IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence" $FILE || true`
+       IS_EXCEPTION=`echo $FILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h|openair3/GTPV1-U/nw-gtpv1u|openair2/UTIL/OPT/ws_|openair3/NAS/COMMON/milenage.h" || true`
        if [ $IS_OAI_LICENCE_PRESENT -eq 0 ] && [ $IS_BSD_LICENCE_PRESENT -eq 0 ]
        then
            if [ $IS_NFAPI -eq 0 ] && [ $IS_EXCEPTION -eq 0 ]
@@ -178,7 +178,7 @@ do
     EXT="${filename##*.}"
     if [ $EXT = "c" ] || [ $EXT = "h" ] || [ $EXT = "cpp" ] || [ $EXT = "hpp" ]
     then
-        TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt $FULLFILE | grep -c Formatted `
+        TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt $FULLFILE | grep -c Formatted || true`
         NB_TO_FORMAT=$((NB_TO_FORMAT + TO_FORMAT))
         if [ $TO_FORMAT -ne 0 ]
         then
@@ -186,20 +186,24 @@ do
             echo $FULLFILE >> ./oai_rules_result_list.txt
         fi
         # Testing if explicit GNU GPL license banner
-        egrep -i "General Public License" $FULLFILE >> files-w-gnu-gpl-license-banner.txt
+        GNU_EXCEPTION=`echo $FULLFILE | egrep -c "openair3/NAS/COMMON/milenage.h" || true`
+        if [ $GNU_EXCEPTION -eq 0 ]
+        then
+            egrep -il "General Public License" $FULLFILE >> files-w-gnu-gpl-license-banner.txt
+        fi
         # Looking at exotic/suspect banner
-        IS_BANNER=`egrep -i -c "Copyright|copyleft" $FULLFILE`
+        IS_BANNER=`egrep -i -c "Copyright|copyleft" $FULLFILE || true`
         if [ $IS_BANNER -ne 0 ]
         then
-            IS_NFAPI=`echo $FULLFILE | egrep -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext"`
-            IS_OAI_LICENCE_PRESENT=`egrep -c "OAI Public License" $FULLFILE`
-            IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence" $FULLFILE`
-            IS_EXCEPTION=`echo $FILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h"`
+            IS_NFAPI=`echo $FULLFILE | egrep -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext" || true`
+            IS_OAI_LICENCE_PRESENT=`egrep -c "OAI Public License" $FULLFILE || true`
+            IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence" $FULLFILE || true`
+            IS_EXCEPTION=`echo $FULLFILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h|openair3/GTPV1-U/nw-gtpv1u|openair2/UTIL/OPT/ws_|openair3/NAS/COMMON/milenage.h" || true`
             if [ $IS_OAI_LICENCE_PRESENT -eq 0 ] && [ $IS_BSD_LICENCE_PRESENT -eq 0 ]
             then
                 if [ $IS_NFAPI -eq 0 ] && [ $IS_EXCEPTION -eq 0 ]
                 then
-                    echo $FILE >> ./files-w-suspect-banner.txt
+                    echo $FULLFILE >> ./files-w-suspect-banner.txt
                 fi
             fi
         fi

ci-scripts/checkGitLabMergeRequestLabels.sh

@@ -0,0 +1,108 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI GitLab merge request applying script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo ""
+    echo "    checkGitLabMergeRequestLabels.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "------------------"
+    echo ""
+    echo "    --mr-id ####"
+    echo "    Specify the ID of the merge request."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+if [ $# -ne 2 ] && [ $# -ne 1 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    --mr-id)
+    MERGE_REQUEST_ID="$2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+LABELS=`curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/$MERGE_REQUEST_ID" | jq '.labels' || true`
+
+IS_MR_BUILD_ONLY=`echo $LABELS | grep -c BUILD-ONLY || true`
+IS_MR_CI=`echo $LABELS | grep -c CI || true`
+IS_MR_4G=`echo $LABELS | grep -c 4G-LTE || true`
+IS_MR_5G=`echo $LABELS | grep -c 5G-NR || true`
+
+# First case: none is present! No CI
+if [ $IS_MR_BUILD_ONLY -eq 0 ] && [ $IS_MR_CI -eq 0 ] && [ $IS_MR_4G -eq 0 ] && [ $IS_MR_5G -eq 0 ]
+then
+    echo "NONE"
+    exit 0
+fi
+
+# Second case: Build-Only
+if [ $IS_MR_BUILD_ONLY -eq 1 ]
+then
+    echo "BUILD-ONLY"
+    exit 0
+fi
+
+# Third case: CI or 4G label --> Full CI run
+if [ $IS_MR_4G -eq 1 ] || [ $IS_MR_CI -eq 1 ] 
+then
+    echo "FULL"
+    exit 0
+fi
+
+# Fourth case: 5G label
+if [ $IS_MR_BUILD_ONLY -eq 0 ] && [ $IS_MR_CI -eq 0 ] && [ $IS_MR_4G -eq 0 ] && [ $IS_MR_5G -eq 1 ]
+then
+    echo "SHORTEN-5G"
+    exit 0
+fi
+

ci-scripts/cls_containerize.py

@@ -0,0 +1,504 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+# Python for CI of OAI-eNB + COTS-UE
+#
+#   Required Python Version
+#     Python 3.x
+#
+#   Required Python Package
+#     pexpect
+#---------------------------------------------------------------------
+
+#-----------------------------------------------------------
+# Import
+#-----------------------------------------------------------
+import sys              # arg
+import re               # reg
+import logging
+import os
+import shutil
+import time
+from multiprocessing import Process, Lock, SimpleQueue
+from zipfile import ZipFile
+
+#-----------------------------------------------------------
+# OAI Testing modules
+#-----------------------------------------------------------
+import sshconnection as SSH
+import helpreadme as HELP
+import constants as CONST
+
+#-----------------------------------------------------------
+# Class Declaration
+#-----------------------------------------------------------
+class Containerize():
+
+	def __init__(self):
+		
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranAllowMerge = False
+		self.ranCommitID = ''
+		self.ranTargetBranch = ''
+		self.eNBIPAddress = ''
+		self.eNBUserName = ''
+		self.eNBPassword = ''
+		self.eNBSourceCodePath = ''
+		self.eNB1IPAddress = ''
+		self.eNB1UserName = ''
+		self.eNB1Password = ''
+		self.eNB1SourceCodePath = ''
+		self.eNB2IPAddress = ''
+		self.eNB2UserName = ''
+		self.eNB2Password = ''
+		self.eNB2SourceCodePath = ''
+		self.forcedWorkspaceCleanup = False
+		self.imageKind = ''
+		self.eNB_instance = 0
+		self.eNB_serverId = ['', '', '']
+		self.yamlPath = ['', '', '']
+		self.eNB_logFile = ['', '', '']
+
+		self.testCase_id = ''
+
+		self.flexranCtrlDeployed = False
+		self.flexranCtrlIpAddress = ''
+		self.cli = ''
+		self.cliBuildOptions = ''
+		self.dockerfileprefix = ''
+		self.host = ''
+		self.allImagesSize = {}
+		self.collectInfo = {}
+#-----------------------------------------------------------
+# Container management functions
+#-----------------------------------------------------------
+
+	def BuildImage(self, HTML):
+		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		if self.eNB_serverId[self.eNB_instance] == '0':
+			lIpAddr = self.eNBIPAddress
+			lUserName = self.eNBUserName
+			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '1':
+			lIpAddr = self.eNB1IPAddress
+			lUserName = self.eNB1UserName
+			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '2':
+			lIpAddr = self.eNB2IPAddress
+			lUserName = self.eNB2UserName
+			lPassWord = self.eNB2Password
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('Building on server: ' + lIpAddr)
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+	
+		# Checking the hostname to get adapted on cli and dockerfileprefixes
+		mySSH.command('hostnamectl', '\$', 5)
+		result = re.search('Ubuntu|Red Hat',  mySSH.getBefore())
+		self.host = result.group(0)
+		if self.host == 'Ubuntu':
+			self.cli = 'docker'
+			self.dockerfileprefix = '.ubuntu18'
+			self.cliBuildOptions = '--no-cache'
+		elif self.host == 'Red Hat':
+			self.cli = 'sudo podman'
+			self.dockerfileprefix = '.rhel8.2'
+			self.cliBuildOptions = '--no-cache --disable-compression'
+
+		imageNames = []
+		result = re.search('eNB', self.imageKind)
+		# Creating a tupple with the imageName and the DockerFile prefix pattern on obelix
+		if result is not None:
+			imageNames.append(('oai-enb', 'eNB'))
+		else:
+			result = re.search('gNB', self.imageKind)
+			if result is not None:
+				imageNames.append(('oai-gnb', 'gNB'))
+			else:
+				result = re.search('all', self.imageKind)
+				if result is not None:
+					imageNames.append(('oai-enb', 'eNB'))
+					imageNames.append(('oai-gnb', 'gNB'))
+					imageNames.append(('oai-lte-ue', 'lteUE'))
+					imageNames.append(('oai-nr-ue', 'nrUE'))
+					if self.host == 'Red Hat':
+						imageNames.append(('oai-physim', 'phySim'))
+		if len(imageNames) == 0:
+			imageNames.append(('oai-enb', 'eNB'))
+		
+		# Workaround for some servers, we need to erase completely the workspace
+		if self.forcedWorkspaceCleanup:
+			mySSH.command('echo ' + lPassWord + ' | sudo -S rm -Rf ' + lSourcePath, '\$', 15)
+	
+		self.testCase_id = HTML.testCase_id
+	
+		# on RedHat/CentOS .git extension is mandatory
+		result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
+		if result is not None:
+			full_ran_repo_name = self.ranRepository
+		else:
+			full_ran_repo_name = self.ranRepository + '.git'
+		mySSH.command('mkdir -p ' + lSourcePath, '\$', 5)
+		mySSH.command('cd ' + lSourcePath, '\$', 5)
+		mySSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600)
+		# Raphael: here add a check if git clone or git fetch went smoothly
+		mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
+		mySSH.command('git config user.name "OAI Jenkins"', '\$', 5)
+
+		mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
+		mySSH.command('mkdir -p cmake_targets/log', '\$', 5)
+		# if the commit ID is provided use it to point to it
+		if self.ranCommitID != '':
+			mySSH.command('git checkout -f ' + self.ranCommitID, '\$', 5)
+		# if the branch is not develop, then it is a merge request and we need to do 
+		# the potential merge. Note that merge conflicts should already been checked earlier
+		imageTag = 'develop'
+		sharedTag = 'develop'
+		if (self.ranAllowMerge):
+			imageTag = 'ci-temp'
+			if self.ranTargetBranch == '':
+				if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
+					mySSH.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
+			else:
+				logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
+				mySSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
+
+ 		# if asterix, copy the entitlement and subscription manager configurations
+		if self.host == 'Red Hat':
+			mySSH.command('mkdir -p  tmp/ca/', '\$', 5)
+			mySSH.command('mkdir -p tmp/entitlement/', '\$', 5) 
+			mySSH.command('sudo cp /etc/rhsm/ca/redhat-uep.pem tmp/ca/', '\$', 5)
+			mySSH.command('sudo cp /etc/pki/entitlement/*.pem tmp/entitlement/', '\$', 5)
+
+		sharedimage = 'ran-build'
+		# Let's remove any previous run artifacts if still there
+		mySSH.command(self.cli + ' image prune --force', '\$', 30)
+		if (not self.ranAllowMerge):
+			mySSH.command(self.cli + ' image rm ' + sharedimage + ':' + sharedTag, '\$', 30)
+		for image,pattern in imageNames:
+			mySSH.command(self.cli + ' image rm ' + image + ':' + imageTag, '\$', 30)
+
+		# Build the shared image only on Push Events (not on Merge Requests)
+		if (not self.ranAllowMerge):
+			mySSH.command(self.cli + ' build ' + self.cliBuildOptions + ' --target ' + sharedimage + ' --tag ' + sharedimage + ':' + sharedTag + ' --file docker/Dockerfile.ran' + self.dockerfileprefix + ' --build-arg NEEDED_GIT_PROXY="http://proxy.eurecom.fr:8080" . > cmake_targets/log/ran-build.log 2>&1', '\$', 1600)
+		# First verify if the shared image was properly created.
+		status = True
+		mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + sharedimage + ':' + sharedTag, '\$', 5)
+		if mySSH.getBefore().count('o such image') != 0:
+			logging.error('\u001B[1m Could not build properly ran-build\u001B[0m')
+			status = False
+		else:
+			result = re.search('Size *= *(?P<size>[0-9\-]+) *bytes', mySSH.getBefore())
+			if result is not None:
+				imageSize = float(result.group('size'))
+				imageSize = imageSize / 1000
+				if imageSize < 1000:
+					logging.debug('\u001B[1m   ran-build size is ' + ('%.0f' % imageSize) + ' kbytes\u001B[0m')
+					self.allImagesSize['ran-build'] = str(round(imageSize,1)) + ' kbytes'
+				else:
+					imageSize = imageSize / 1000
+					if imageSize < 1000:
+						logging.debug('\u001B[1m   ran-build size is ' + ('%.0f' % imageSize) + ' Mbytes\u001B[0m')
+						self.allImagesSize['ran-build'] = str(round(imageSize,1)) + ' Mbytes'
+					else:
+						imageSize = imageSize / 1000
+						logging.debug('\u001B[1m   ran-build size is ' + ('%.3f' % imageSize) + ' Gbytes\u001B[0m')
+						self.allImagesSize['ran-build'] = str(round(imageSize,1)) + ' Gbytes'
+			else:
+				logging.debug('ran-build size is unknown')
+		# If the shared image failed, no need to continue
+		if not status:
+			# Recover the name of the failed container?
+			mySSH.command(self.cli + ' ps --quiet --filter "status=exited" -n1 | xargs ' + self.cli + ' rm -f', '\$', 5)
+			mySSH.command(self.cli + ' image prune --force', '\$', 30)
+			mySSH.close()
+			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit(1)
+		else:
+			# Recover build logs, for the moment only possible when build is successful
+			mySSH.command(self.cli + ' create --name test ' + sharedimage + ':' + sharedTag, '\$', 5)
+			mySSH.command('mkdir -p cmake_targets/log/ran-build', '\$', 5)
+			mySSH.command(self.cli + ' cp test:/oai-ran/cmake_targets/log/. cmake_targets/log/ran-build', '\$', 5)
+			mySSH.command(self.cli + ' rm -f test', '\$', 5)
+
+		# Build the target image(s)
+		for image,pattern in imageNames:
+			# the archived Dockerfiles have "ran-build:latest" as base image
+			# we need to update them with proper tag
+			mySSH.command('sed -i -e "s#' + sharedimage + ':latest#' + sharedimage + ':' + sharedTag + '#" docker/Dockerfile.' + pattern + self.dockerfileprefix, '\$', 5)
+			mySSH.command(self.cli + ' build ' + self.cliBuildOptions + ' --target ' + image + ' --tag ' + image + ':' + imageTag + ' --file docker/Dockerfile.' + pattern + self.dockerfileprefix + ' . > cmake_targets/log/' + image + '.log 2>&1', '\$', 1200)
+			# split the log
+			mySSH.command('mkdir -p cmake_targets/log/' + image, '\$', 5)
+			mySSH.command('python3 ci-scripts/docker_log_split.py --logfilename=cmake_targets/log/' + image + '.log', '\$', 5)
+			# checking the status of the build
+			mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + image + ':' + imageTag, '\$', 5)
+			if mySSH.getBefore().count('o such image') != 0:
+				logging.error('\u001B[1m Could not build properly ' + image + '\u001B[0m')
+				status = False
+				# Here we should check if the last container corresponds to a failed command and destroy it
+				mySSH.command(self.cli + ' ps --quiet --filter "status=exited" -n1 | xargs ' + self.cli + ' rm -f', '\$', 5)
+				self.allImagesSize[image] = 'N/A -- Build Failed'
+			else:
+				result = re.search('Size *= *(?P<size>[0-9\-]+) *bytes', mySSH.getBefore())
+				if result is not None:
+					imageSize = float(result.group('size'))
+					imageSize = imageSize / 1000
+					if imageSize < 1000:
+						logging.debug('\u001B[1m   ' + image + ' size is ' + ('%.0f' % imageSize) + ' kbytes\u001B[0m')
+						self.allImagesSize[image] = str(round(imageSize,1)) + ' kbytes'
+					else:
+						imageSize = imageSize / 1000
+						if imageSize < 1000:
+							logging.debug('\u001B[1m   ' + image + ' size is ' + ('%.0f' % imageSize) + ' Mbytes\u001B[0m')
+							self.allImagesSize[image] = str(round(imageSize,1)) + ' Mbytes'
+						else:
+							imageSize = imageSize / 1000
+							logging.debug('\u001B[1m   ' + image + ' size is ' + ('%.3f' % imageSize) + ' Gbytes\u001B[0m')
+							self.allImagesSize[image] = str(round(imageSize,1)) + ' Gbytes'
+				else:
+					logging.debug('ran-build size is unknown')
+					self.allImagesSize[image] = 'unknown'
+			# Now pruning dangling images in between target builds
+			mySSH.command(self.cli + ' image prune --force', '\$', 30)
+
+		# Analyzing the logs
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
+		mySSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
+		mySSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
+
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
+		mySSH.command('rm -f build_log_' + self.testCase_id + '.zip || true', '\$', 5)
+		if (os.path.isfile('./build_log_' + self.testCase_id + '.zip')):
+			os.remove('./build_log_' + self.testCase_id + '.zip')
+		if (os.path.isdir('./build_log_' + self.testCase_id)):
+			shutil.rmtree('./build_log_' + self.testCase_id)
+		mySSH.command('zip -r -qq build_log_' + self.testCase_id + '.zip build_log_' + self.testCase_id, '\$', 5)
+		mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/build_log_' + self.testCase_id + '.zip', '.')
+		mySSH.command('rm -f build_log_' + self.testCase_id + '.zip','\$', 5)
+		mySSH.close()
+		ZipFile('build_log_' + self.testCase_id + '.zip').extractall('.')
+
+		#Trying to identify the errors and warnings for each built images
+		imageNames1 = imageNames
+		shared = ('ran-build','ran')
+		imageNames1.insert(0, shared) 
+		for image,pattern in imageNames1:
+			files = {}
+			file_list = [f for f in os.listdir('build_log_' + self.testCase_id + '/' + image) if os.path.isfile(os.path.join('build_log_' + self.testCase_id + '/' + image, f)) and f.endswith('.txt')]
+			for fil in file_list:
+				errorandwarnings = {}
+				warningsNo = 0
+				errorsNo = 0
+				with open('build_log_{}/{}/{}'.format(self.testCase_id,image,fil), mode='r') as inputfile:
+					for line in inputfile:
+						result = re.search(' ERROR ', str(line))
+						if result is not None:
+							errorsNo += 1
+						result = re.search(' error:', str(line))
+						if result is not None:
+							errorsNo += 1
+						result = re.search(' WARNING ', str(line))
+						if result is not None:
+							warningsNo += 1
+						result = re.search(' warning:', str(line))
+						if result is not None:
+							warningsNo += 1
+					errorandwarnings['errors'] = errorsNo
+					errorandwarnings['warnings'] = warningsNo
+					errorandwarnings['status'] = status
+				files[fil] = errorandwarnings
+			self.collectInfo[image] = files
+		
+		if status:
+			logging.info('\u001B[1m Building OAI Image(s) Pass\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'OK', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlNextTabHeaderTestRow(self.collectInfo, self.allImagesSize)
+		else:
+			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlNextTabHeaderTestRow(self.collectInfo, self.allImagesSize)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit(1)
+
+	def DeployObject(self, HTML, EPC):
+		if self.eNB_serverId[self.eNB_instance] == '0':
+			lIpAddr = self.eNBIPAddress
+			lUserName = self.eNBUserName
+			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '1':
+			lIpAddr = self.eNB1IPAddress
+			lUserName = self.eNB1UserName
+			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '2':
+			lIpAddr = self.eNB2IPAddress
+			lUserName = self.eNB2UserName
+			lPassWord = self.eNB2Password
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('\u001B[1m Deploying OAI Object on server: ' + lIpAddr + '\u001B[0m')
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+		# Putting the CPUs in a good state, we do that only on a few servers
+		mySSH.command('hostname', '\$', 5)
+		result = re.search('obelix|asterix',  mySSH.getBefore())
+		if result is not None:
+			mySSH.command('if command -v cpupower &> /dev/null; then echo ' + lPassWord + ' | sudo -S cpupower idle-set -D 0; fi', '\$', 5)
+			time.sleep(5)
+		
+		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
+		mySSH.command('cp docker-compose.yml ci-docker-compose.yml', '\$', 5)
+		imageTag = 'develop'
+		if (self.ranAllowMerge):
+			imageTag = 'ci-temp'
+		mySSH.command('sed -i -e "s/image: oai-enb:latest/image: oai-enb:' + imageTag + '/" ci-docker-compose.yml', '\$', 2)
+		localMmeIpAddr = EPC.MmeIPAddress
+		mySSH.command('sed -i -e "s/CI_MME_IP_ADDR/' + localMmeIpAddr + '/" ci-docker-compose.yml', '\$', 2)
+		if self.flexranCtrlDeployed:
+			mySSH.command('sed -i -e \'s/FLEXRAN_ENABLED:.*/FLEXRAN_ENABLED: "yes"/\' ci-docker-compose.yml', '\$', 2)
+			mySSH.command('sed -i -e "s/CI_FLEXRAN_CTL_IP_ADDR/' + self.flexranCtrlIpAddress + '/" ci-docker-compose.yml', '\$', 2)
+		else:
+			mySSH.command('sed -i -e "s/FLEXRAN_ENABLED:.*$/FLEXRAN_ENABLED: \"no\"/" ci-docker-compose.yml', '\$', 2)
+			mySSH.command('sed -i -e "s/CI_FLEXRAN_CTL_IP_ADDR/127.0.0.1/" ci-docker-compose.yml', '\$', 2)
+		# Currently support only one
+		mySSH.command('docker-compose --file ci-docker-compose.yml config --services | sed -e "s@^@service=@"', '\$', 2)
+		result = re.search('service=(?P<svc_name>[a-zA-Z0-9\_]+)', mySSH.getBefore())
+		if result is not None:
+			svcName = result.group('svc_name')
+			mySSH.command('docker-compose --file ci-docker-compose.yml up -d ' + svcName, '\$', 2)
+
+		# Checking Status
+		mySSH.command('docker-compose --file ci-docker-compose.yml config', '\$', 5)
+		result = re.search('container_name: (?P<container_name>[a-zA-Z0-9\-\_]+)', mySSH.getBefore())
+		unhealthyNb = 0
+		healthyNb = 0
+		startingNb = 0
+		containerName = ''
+		if result is not None:
+			containerName = result.group('container_name')
+			time.sleep(5)
+			cnt = 0
+			while (cnt < 3):
+				mySSH.command('docker inspect --format=\'{{.State.Health.Status}}\' ' + containerName, '\$', 5)
+				unhealthyNb = mySSH.getBefore().count('unhealthy')
+				healthyNb = mySSH.getBefore().count('healthy') - unhealthyNb
+				startingNb = mySSH.getBefore().count('starting')
+				if healthyNb == 1:
+					cnt = 10
+				else:
+					time.sleep(10)
+					cnt += 1
+		logging.debug(' -- ' + str(healthyNb) + ' healthy container(s)')
+		logging.debug(' -- ' + str(unhealthyNb) + ' unhealthy container(s)')
+		logging.debug(' -- ' + str(startingNb) + ' still starting container(s)')
+
+		status = False
+		if healthyNb == 1:
+			cnt = 0
+			while (cnt < 20):
+				mySSH.command('docker logs ' + containerName + ' | egrep --text --color=never -i "wait|sync|Starting"', '\$', 30) 
+				result = re.search('got sync|Starting F1AP at CU', mySSH.getBefore())
+				if result is None:
+					time.sleep(6)
+					cnt += 1
+				else:
+					cnt = 100
+					status = True
+					logging.info('\u001B[1m Deploying OAI object Pass\u001B[0m')
+					time.sleep(10)
+		mySSH.close()
+
+		self.testCase_id = HTML.testCase_id
+		self.eNB_logFile[self.eNB_instance] = 'enb_' + self.testCase_id + '.log'
+
+		if status:
+			HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		else:
+			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ALL_PROCESSES_OK)
+
+	def UndeployObject(self, HTML, RAN):
+		logging.info('\u001B[1m Undeploying OAI Object Pass\u001B[0m')
+		if self.eNB_serverId[self.eNB_instance] == '0':
+			lIpAddr = self.eNBIPAddress
+			lUserName = self.eNBUserName
+			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '1':
+			lIpAddr = self.eNB1IPAddress
+			lUserName = self.eNB1UserName
+			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '2':
+			lIpAddr = self.eNB2IPAddress
+			lUserName = self.eNB2UserName
+			lPassWord = self.eNB2Password
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('\u001B[1m Deploying OAI Object on server: ' + lIpAddr + '\u001B[0m')
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
+		# Currently support only one
+		mySSH.command('docker-compose --file ci-docker-compose.yml config', '\$', 5)
+		result = re.search('container_name: (?P<container_name>[a-zA-Z0-9\-\_]+)', mySSH.getBefore())
+		if result is not None:
+			containerName = result.group('container_name')
+			mySSH.command('docker kill --signal INT ' + containerName, '\$', 30)
+			time.sleep(5)
+			mySSH.command('docker logs ' + containerName + ' > ' + lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '\$', 30)
+			mySSH.command('docker rm -f ' + containerName, '\$', 30)
+
+		# Putting the CPUs back in a idle state, we do that only on a few servers
+		mySSH.command('hostname', '\$', 5)
+		result = re.search('obelix|asterix',  mySSH.getBefore())
+		if result is not None:
+			mySSH.command('if command -v cpupower &> /dev/null; then echo ' + lPassWord + ' | sudo -S cpupower idle-set -E; fi', '\$', 5)
+		mySSH.close()
+
+		# Analyzing log file!
+		copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '.')
+		nodeB_prefix = 'e'
+		if (copyin_res == -1):
+			HTML.htmleNBFailureMsg='Could not copy ' + nodeB_prefix + 'NB logfile to analyze it!'
+			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
+		else:
+			logging.debug('\u001B[1m Analyzing ' + nodeB_prefix + 'NB logfile \u001B[0m ' + self.eNB_logFile[self.eNB_instance])
+			logStatus = RAN.AnalyzeLogFile_eNB(self.eNB_logFile[self.eNB_instance], HTML)
+			if (logStatus < 0):
+				HTML.CreateHtmlTestRow(RAN.runtime_stats, 'KO', logStatus)
+			else:
+				HTML.CreateHtmlTestRow(RAN.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
+

ci-scripts/cls_static_code_analysis.py

@@ -0,0 +1,192 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+# Python for CI of OAI-eNB + COTS-UE
+#
+#   Required Python Version
+#     Python 3.x
+#
+#   Required Python Package
+#     pexpect
+#---------------------------------------------------------------------
+
+#-----------------------------------------------------------
+# Import
+#-----------------------------------------------------------
+import sys              # arg
+import re               # reg
+import logging
+import os
+import time
+
+#-----------------------------------------------------------
+# OAI Testing modules
+#-----------------------------------------------------------
+import sshconnection as SSH
+import helpreadme as HELP
+import constants as CONST
+
+#-----------------------------------------------------------
+# Class Declaration
+#-----------------------------------------------------------
+class CppCheckResults():
+
+	def __init__(self):
+
+		self.variants = ['xenial', 'bionic']
+		self.versions = ['','']
+		self.nbErrors = [0,0]
+		self.nbWarnings = [0,0]
+		self.nbNullPtrs = [0,0]
+		self.nbMemLeaks = [0,0]
+		self.nbUninitVars = [0,0]
+		self.nbInvalidPrintf = [0,0]
+		self.nbModuloAlways = [0,0]
+		self.nbTooManyBitsShift = [0,0]
+		self.nbIntegerOverflow = [0,0]
+		self.nbWrongScanfArg = [0,0]
+		self.nbPtrAddNotNull = [0,0]
+		self.nbOppoInnerCondition = [0,0]
+
+class StaticCodeAnalysis():
+
+	def __init__(self):
+
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranAllowMerge = False
+		self.ranCommitID = ''
+		self.ranTargetBranch = ''
+		self.eNBIPAddress = ''
+		self.eNBUserName = ''
+		self.eNBPassword = ''
+		self.eNBSourceCodePath = ''
+
+	def CppCheckAnalysis(self, HTML):
+		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		lIpAddr = self.eNBIPAddress
+		lUserName = self.eNBUserName
+		lPassWord = self.eNBPassword
+		lSourcePath = self.eNBSourceCodePath
+
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('Building on server: ' + lIpAddr)
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+
+		self.testCase_id = HTML.testCase_id
+
+		# on RedHat/CentOS .git extension is mandatory
+		result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
+		if result is not None:
+			full_ran_repo_name = self.ranRepository
+		else:
+			full_ran_repo_name = self.ranRepository + '.git'
+		mySSH.command('mkdir -p ' + lSourcePath, '\$', 5)
+		mySSH.command('cd ' + lSourcePath, '\$', 5)
+		mySSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600)
+		# Raphael: here add a check if git clone or git fetch went smoothly
+		mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
+		mySSH.command('git config user.name "OAI Jenkins"', '\$', 5)
+
+		mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
+		mySSH.command('mkdir -p cmake_targets/log', '\$', 5)
+		# if the commit ID is provided use it to point to it
+		if self.ranCommitID != '':
+			mySSH.command('git checkout -f ' + self.ranCommitID, '\$', 5)
+
+		mySSH.command('docker image rm oai-cppcheck:bionic oai-cppcheck:xenial || true', '\$', 60)
+		mySSH.command('docker build --tag oai-cppcheck:xenial --file ci-scripts/docker/Dockerfile.cppcheck.xenial . > cmake_targets/log/cppcheck-xenial.txt 2>&1', '\$', 600)
+		mySSH.command('sed -e "s@xenial@bionic@" ci-scripts/docker/Dockerfile.cppcheck.xenial > ci-scripts/docker/Dockerfile.cppcheck.bionic', '\$', 6)
+		mySSH.command('docker build --tag oai-cppcheck:bionic --file ci-scripts/docker/Dockerfile.cppcheck.bionic . > cmake_targets/log/cppcheck-bionic.txt 2>&1', '\$', 600)
+		mySSH.command('docker image rm oai-cppcheck:bionic oai-cppcheck:xenial || true', '\$', 60)
+
+		# Analyzing the logs
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
+		mySSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
+		mySSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
+		mySSH.close()
+
+		mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/build_log_' + self.testCase_id + '/*', '.')
+		CCR = CppCheckResults()
+		vId = 0
+		for variant in CCR.variants:
+			if (os.path.isfile('./cppcheck-'+ variant + '.txt')):
+				xmlStart = False
+				with open('./cppcheck-'+ variant + '.txt', 'r') as logfile:
+					for line in logfile:
+						ret = re.search('Unpacking cppcheck \((?P<version>[0-9\.]+)', str(line))
+						if ret is not None:
+						   CCR.versions[vId] = ret.group('version')
+						if re.search('RUN cat cmake_targets/log/cppcheck.xml', str(line)) is not None:
+							xmlStart = True
+						if xmlStart:
+							if re.search('severity="error"', str(line)) is not None:
+								CCR.nbErrors[vId] += 1
+							if re.search('severity="warning"', str(line)) is not None:
+								CCR.nbWarnings[vId] += 1
+							if re.search('id="memleak"', str(line)) is not None:
+								CCR.nbMemLeaks[vId] += 1
+							if re.search('id="nullPointer"', str(line)) is not None:
+								CCR.nbNullPtrs[vId] += 1
+							if re.search('id="uninitvar"', str(line)) is not None:
+								CCR.nbUninitVars[vId] += 1
+							if re.search('id="invalidPrintfArgType_sint"|id="invalidPrintfArgType_uint"', str(line)) is not None:
+								CCR.nbInvalidPrintf[vId] += 1
+							if re.search('id="moduloAlwaysTrueFalse"', str(line)) is not None:
+								CCR.nbModuloAlways[vId] += 1
+							if re.search('id="shiftTooManyBitsSigned"', str(line)) is not None:
+								CCR.nbTooManyBitsShift[vId] += 1
+							if re.search('id="integerOverflow"', str(line)) is not None:
+								CCR.nbIntegerOverflow[vId] += 1
+							if re.search('id="wrongPrintfScanfArgNum"|id="invalidScanfArgType_int"', str(line)) is not None:
+								CCR.nbWrongScanfArg[vId] += 1
+							if re.search('id="pointerAdditionResultNotNull"', str(line)) is not None:
+								CCR.nbPtrAddNotNull[vId] += 1
+							if re.search('id="oppositeInnerCondition"', str(line)) is not None:
+								CCR.nbOppoInnerCondition[vId] += 1
+			logging.debug('========  Variant ' + variant + ' - ' + CCR.versions[vId] + ' ========')
+			logging.debug('   ' + str(CCR.nbErrors[vId]) + ' errors')
+			logging.debug('   ' + str(CCR.nbWarnings[vId]) + ' warnings')
+			logging.debug('  -- Details --')
+			logging.debug('   Memory leak:                     ' + str(CCR.nbMemLeaks[vId]))
+			logging.debug('   Possible null pointer deference: ' + str(CCR.nbNullPtrs[vId]))
+			logging.debug('   Uninitialized variable:          ' + str(CCR.nbUninitVars[vId]))
+			logging.debug('   Undefined behaviour shifting:    ' + str(CCR.nbTooManyBitsShift[vId]))
+			logging.debug('   Signed integer overflow:         ' + str(CCR.nbIntegerOverflow[vId]))
+			logging.debug('')
+			logging.debug('   Printf formatting issue:         ' + str(CCR.nbInvalidPrintf[vId]))
+			logging.debug('   Modulo result is predetermined:  ' + str(CCR.nbModuloAlways[vId]))
+			logging.debug('   Opposite Condition -> dead code: ' + str(CCR.nbOppoInnerCondition[vId]))
+			logging.debug('   Wrong Scanf Nb Args:             ' + str(CCR.nbWrongScanfArg[vId]))
+			logging.debug('')
+			vId += 1
+
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRowCppCheckResults(CCR)
+		logging.info('\u001B[1m Static Code Analysis Pass\u001B[0m')
+
+		return 0
+

ci-scripts/conf_files/benetel-4g.conf

@@ -0,0 +1,285 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    # real_time choice in {hard, rt-preempt, no}
+    real_time       =  "no";
+
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 222; mnc = 01; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function             = "NGFI_RCC_IF4p5";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type					      = "FDD";
+      tdd_config 					      = 3;
+      tdd_config_s            			      = 0;
+      prefix_type             			      = "NORMAL";
+      eutra_band              			      = 7;
+      downlink_frequency      			      = 2655000000L;
+      uplink_frequency_offset 			      = -120000000;
+      Nid_cell					      = 0;
+      N_RB_DL                 			      = 100;
+      Nid_cell_mbsfn          			      = 0;
+      nb_antenna_ports                                = 1;
+      nb_antennas_tx          			      = 1;
+      nb_antennas_rx          			      = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 125;
+      pbch_repetition                                 = "FALSE";
+      prach_root              			      = 0;
+      prach_config_index      			      = 0;
+      prach_high_speed        			      = "DISABLE";
+      prach_zero_correlation  			      = 1;
+      prach_freq_offset       			      = 90;
+      pucch_delta_shift       			      = 1;
+      pucch_nRB_CQI           			      = 0;
+      pucch_nCS_AN            			      = 0;
+      pucch_n1_AN             			      = 0;
+      pdsch_referenceSignalPower 			      = -10;
+      pdsch_p_b                  			      = 0;
+      pusch_n_SB                 			      = 1;
+      pusch_enable64QAM          			      = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled  			      = "ENABLE";
+      pusch_groupAssignment      			      = 0;
+      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b		    	      = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -108;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff			      = 2;
+      ue_TimersAndConstants_t300			      = 1000;
+      ue_TimersAndConstants_t301			      = 1000;
+      ue_TimersAndConstants_t310			      = 1000;
+      ue_TimersAndConstants_t311			      = 10000;
+      ue_TimersAndConstants_n310			      = 20;
+      ue_TimersAndConstants_n311			      = 1;
+      ue_TransmissionMode                                    = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA) 
+      nr_scg_ssb_freq	      	    	      	   	      	      = 640000;	
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    enable_measurement_reports = "yes";
+
+    ///X2
+    enable_x2 = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.1";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	phy_test_mode = 0;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
+        }
+);
+
+L1s = (
+      {
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        prach_dtx_threshold = 150;
+      }
+);
+
+RUs = (
+    {
+        //local_if_name  = "enp129s0f0";
+        local_if_name  = "dpdk";
+        sdr_addrs      = "softmodem -m 2048 -l 35 -n 2 -b 0000:81:00.3 --proc-type auto --file-prefix ggg -- -p 0x1";
+        #sdr_addrs      = "softmodem -l 8 -n 2 -- -p 0x2";
+        #remote_address = "127.0.0.2";
+        #local_address  = "127.0.0.1";
+        #local_portc    = 50000;
+        #remote_portc   = 50000;
+        #local_portd    = 50001;
+        #remote_portd   = 50001;
+        local_rf       = "no"
+        tr_preference  = "raw_if4p5"
+        nb_tx          = 1
+        nb_rx          = 1
+        att_tx         = 0
+        att_rx         = 0;
+        eNB_instances  = [0];
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    #parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+NETWORK_CONTROLLER :
+{
+    FLEXRAN_ENABLED        = "no";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_PORT           = 2210;
+    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+    FLEXRAN_AWAIT_RECONF   = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };

ci-scripts/conf_files/benetel-5g.conf

@@ -0,0 +1,303 @@
+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;});	 
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 31; //0;
+    pdsch_AntennaPorts                                        = 1;
+    pusch_AntennaPorts                                        = 1;
+    #pusch_TargetSNRx10                                        = 200;
+    #pucch_TargetSNRx10                                        = 200;
+    pusch_TargetSNRx10                                        = 200;
+    pucch_TargetSNRx10                                        = 200;
+	
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is is the central frequency of SSB 
+      absoluteFrequencySSB                                          = 640000; //641272
+      dl_frequencyBand                                                 = 78;
+      # the carrier frequency is assumed to be in the middle of the carrier, i.e. dl_absoluteFrequencyPointA_kHz + dl_carrierBandwidth*12*SCS_kHz/2
+      dl_absoluteFrequencyPointA                                       = 638728; //640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=84,L=13 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6368; 
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 0;
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+        #pdschTimeDomainAllocationList (up to 16 entries)
+        initialDLBWPk0_0                    = 0;  #for DL slot
+        initialDLBWPmappingType_0           = 0;  #0=typeA,1=typeB
+        initialDLBWPstartSymbolAndLength_0  = 40; #this is SS=1,L=13
+
+        initialDLBWPk0_1                    = 0;  #for mixed slot
+        initialDLBWPmappingType_1           = 0;
+        initialDLBWPstartSymbolAndLength_1  = 57; #this is SS=1,L=5
+
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 6368; 
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 4;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 74;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+          #preambleReceivedTargetPower                               = -104;
+          #preambleReceivedTargetPower                               = -108;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 2;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 5;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14; //15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 1;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        #msg1_SubcarrierSpacing                                      = 1,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+      # pusch-ConfigCommon (up to 16 elements)
+        initialULBWPk2_0                      = 6;  # used for UL slot
+        initialULBWPmappingType_0             = 1
+        initialULBWPstartSymbolAndLength_0    = 55; # this is SS=0 L=12
+
+        initialULBWPk2_1                      = 6;  # used for mixed slot
+        initialULBWPmappingType_1             = 1;
+        initialULBWPstartSymbolAndLength_1    = 24; # this is SS=10 L=2
+
+        initialULBWPk2_2                      = 7;  # used for Msg.3 during RA
+        initialULBWPmappingType_2             = 1;
+        initialULBWPstartSymbolAndLength_2    = 52; # this is SS=10 L=4
+
+
+        msg3_DeltaPreamble                                          = 1;
+        #p0_NominalWithGrant                                         =-90;
+        p0_NominalWithGrant                                         =-118;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        #p0_nominal                                                  = -90;
+        p0_nominal                                                  = -118;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1; #0x80;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7; //8; //7;
+      nrofDownlinkSymbols                                           = 6; //0; //6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4; //0; //4;
+
+  #ssPBCH_BlockPower                                             = 10;
+  ssPBCH_BlockPower                                             = -35;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2 = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "127.0.0.1";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "CI_GNB_IP_ADDR";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "CI_GNB_IP_ADDR";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.2/24";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+	pusch_proc_threads = 8;
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "no"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 114;
+         eNB_instances  = [0];
+         //clock_src = "internal";
+         clock_src = "external";
+
+        local_if_name  = "dpdk";
+        sdr_addrs      = "softmodem -m 2048 -l 34  -n 3 -b 0000:81:00.2 --proc-type auto --file-prefix hhh -- -p 0x1";
+        remote_address = "127.0.0.2";
+        local_address  = "127.0.0.1";
+        local_portc    = 50000;
+        remote_portc   = 50000;
+        local_portd    = 50001;
+        remote_portd   = 50001;
+        tr_preference  = "raw_if4p5"
+
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    //parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_DISABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/cu.band7.tm1.100PRB.conf

@@ -181,6 +181,7 @@ eNBs = (
       {
         ipv4       = "CI_MME_IP_ADDR";
         ipv6       = "192:168:30::17";
+        port       = 36412 ;
         active     = "yes";
         preference = "ipv4";
       }
@@ -214,7 +215,7 @@ log_config = {
 NETWORK_CONTROLLER : {
   FLEXRAN_ENABLED        = "no";
   FLEXRAN_INTERFACE_NAME = "lo";
-  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
   FLEXRAN_PORT           = 2210;
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/cu.band7.tm1.25PRB.conf

@@ -181,6 +181,7 @@ eNBs = (
       {
         ipv4       = "CI_MME_IP_ADDR";
         ipv6       = "192:168:30::17";
+        port       = 36412 ;
         active     = "yes";
         preference = "ipv4";
       }
@@ -214,7 +215,7 @@ log_config = {
 NETWORK_CONTROLLER : {
   FLEXRAN_ENABLED        = "no";
   FLEXRAN_INTERFACE_NAME = "lo";
-  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
   FLEXRAN_PORT           = 2210;
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/cu.band7.tm1.50PRB.conf

@@ -181,6 +181,7 @@ eNBs = (
       {
         ipv4       = "CI_MME_IP_ADDR";
         ipv6       = "192:168:30::17";
+        port       = 36412 ;
         active     = "yes";
         preference = "ipv4";
       }
@@ -214,7 +215,7 @@ log_config = {
 NETWORK_CONTROLLER : {
   FLEXRAN_ENABLED        = "no";
   FLEXRAN_INTERFACE_NAME = "lo";
-  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
   FLEXRAN_PORT           = 2210;
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/du.band7.tm1.100PRB.usrpb210.conf

@@ -112,7 +112,7 @@ log_config = {
 NETWORK_CONTROLLER : {
   FLEXRAN_ENABLED        = "no";
   FLEXRAN_INTERFACE_NAME = "lo";
-  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
   FLEXRAN_PORT           = 2210;
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/du.band7.tm1.25PRB.usrpb210.conf

@@ -112,7 +112,7 @@ log_config = {
 NETWORK_CONTROLLER : {
   FLEXRAN_ENABLED        = "no";
   FLEXRAN_INTERFACE_NAME = "lo";
-  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
   FLEXRAN_PORT           = 2210;
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/du.band7.tm1.50PRB.usrpb210.conf

@@ -112,7 +112,7 @@ log_config = {
 NETWORK_CONTROLLER : {
   FLEXRAN_ENABLED        = "no";
   FLEXRAN_INTERFACE_NAME = "lo";
-  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
   FLEXRAN_PORT           = 2210;
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band13.tm1.25PRB.usrpb210.conf

@@ -175,6 +175,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -184,6 +185,8 @@ eNBs =
     enable_x2 = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -236,7 +239,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band13.tm1.50PRB.emtc.conf

@@ -356,6 +356,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -367,6 +368,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -445,7 +448,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band17.tm1.25PRB.usrpb210.conf

@@ -177,6 +177,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -188,6 +189,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -248,7 +251,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band17.tm1.mbms.25PRB.usrpb210.conf

@@ -178,6 +178,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -189,6 +190,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     ///M2
     target_mce_m2_ip_address      = ( { ipv4       = "127.0.0.7";
@@ -392,7 +395,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -136,6 +136,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -147,6 +148,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -225,7 +228,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -136,6 +136,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -147,6 +148,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -225,7 +228,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -136,6 +136,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -147,6 +148,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -225,7 +228,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band40.tm2.25PRB.FairScheduler.usrpb210.conf

@@ -136,6 +136,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -145,6 +146,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -223,7 +226,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf

@@ -173,6 +173,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -184,6 +185,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -244,7 +247,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band7.tm1.25PRB.slave.usrpb210.conf

@@ -176,6 +176,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -187,6 +188,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
     target_enb_x2_ip_address      = (
                                      { ipv4       = "CI_RCC_IP_ADDR";
                                        ipv6       = "192:168:30::17";
@@ -253,7 +256,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf

@@ -28,83 +28,85 @@ eNBs =
       node_function             = "3GPP_eNODEB";
       node_timing               = "synch_to_ext_device";
       node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 7;
-      downlink_frequency      			      = 2680000000L;
-      uplink_frequency_offset 			      = -120000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 25;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -25;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 0;
+      N_RB_DL                   = 25;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 125;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -25;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
       /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
       */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
 
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -104;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+      */
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
 
       //Parameters for SIB18
       rxPool_sc_CP_Len                                       = "normal";
@@ -116,27 +118,28 @@ eNBs =
       rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
       rxPool_ResourceConfig_offsetIndicator_choice           = 0;
       rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
 */
       // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_cp_Len                                      = "normal"
+      discRxPool_discPeriod                                  = "rf32"
+      discRxPool_numRetx                                     = 1;
+      discRxPool_numRepetition                               = 2;
+      discRxPool_ResourceConfig_prb_Num                      = 5;
+      discRxPool_ResourceConfig_prb_Start                    = 3;
+      discRxPool_ResourceConfig_prb_End                      = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present      = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice       = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present       = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size= 5;
       discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
 
       }
@@ -176,6 +179,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -187,6 +191,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -201,40 +207,43 @@ eNBs =
   }
 );
 
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
-        }  
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }  
 );
 
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }  
 );
 
-RUs = (
-    {		  
-       local_rf       = "yes"
-         nb_tx          = 1
-         nb_rx          = 1
-         att_tx         = 0
-         att_rx         = 0;
-         bands          = [7];
-         max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 125;
-         eNB_instances  = [0];
-
-    }
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 0
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 125;
+    eNB_instances                 = [0];
+  }
 );  
 
-THREAD_STRUCT = (
+THREAD_STRUCT =
+(
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
     parallel_config    = "PARALLEL_SINGLE_THREAD";
@@ -247,27 +256,27 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";
 };
 
-     log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
+log_config :
+{
+    global_log_level                      ="info";
+    global_log_verbosity                  ="medium";
+    hw_log_level                          ="info";
+    hw_log_verbosity                      ="medium";
+    phy_log_level                         ="info";
+    phy_log_verbosity                     ="medium";
+    mac_log_level                         ="info";
+    mac_log_verbosity                     ="high";
+    rlc_log_level                         ="info";
+    rlc_log_verbosity                     ="medium";
+    pdcp_log_level                        ="info";
+    pdcp_log_verbosity                    ="medium";
+    rrc_log_level                         ="info";
+    rrc_log_verbosity                     ="medium";
+};
 

ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf

@@ -181,6 +181,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -192,6 +193,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -252,7 +255,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf

@@ -144,6 +144,8 @@ eNBs =
       discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
       discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
 
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
     }
   );
 
@@ -181,6 +183,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -190,6 +193,8 @@ eNBs =
     enable_x2 = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES : 
     {
@@ -261,7 +266,7 @@ RUs = (
     max_pdschReferenceSignalPower = -27;
     max_rxgain                    = 118;
     eNB_instances  = [0];
-    clock_src      = "external";
+#    clock_src      = "external";
   }
 );  
 

ci-scripts/conf_files/enb.band7.tm2.25PRB.usrpb210.conf

@@ -176,6 +176,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -187,6 +188,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -246,7 +249,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/enb.slave.band13.tm1.25PRB.usrpb210.conf

@@ -175,6 +175,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -183,6 +184,8 @@ eNBs =
     enable_x2 = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
     target_enb_x2_ip_address      = (
                                      { ipv4       = "CI_RCC_IP_ADDR";
                                        ipv6       = "192:168:30::17";
@@ -241,7 +244,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf

@@ -0,0 +1,301 @@
+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 311; mnc = 480; mnc_length = 3;});	 
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 0;
+    pdsch_AntennaPorts                                        = 1;
+    pusch_AntennaPorts                                        = 1;
+    pusch_TargetSNRx10                                        = 200;
+    pucch_TargetSNRx10                                        = 200;
+	
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is pointA + 23 PRBs@120kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 2071241;
+      dl_frequencyBand                                                 = 261;
+      # this is 27.900 GHz
+      dl_absoluteFrequencyPointA                                       = 2070833;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 3;
+        dl_carrierBandwidth                                            = 32;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=32 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 8525;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 3;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 12;
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+        #pdschTimeDomainAllocationList (up to 16 entries)
+             initialDLBWPk0_0                    = 0;
+             #initialULBWPmappingType
+	     #0=typeA,1=typeB
+             initialDLBWPmappingType_0           = 0;
+             #this is SS=2,L=3
+             initialDLBWPstartSymbolAndLength_0  = 40;
+
+             initialDLBWPk0_1                    = 0;
+             initialDLBWPmappingType_1           = 0;
+             #this is SS=2,L=12 
+             initialDLBWPstartSymbolAndLength_1  = 53;
+
+             initialDLBWPk0_2                    = 0;
+             initialDLBWPmappingType_2           = 0;
+             #this is SS=1,L=12 
+             initialDLBWPstartSymbolAndLength_2  = 54;
+
+             initialDLBWPk0_3                    = 0;
+             initialDLBWPmappingType_3           = 0;
+             #this is SS=1,L=4 //5 (4 is for 43, 5 is for 57)
+             initialDLBWPstartSymbolAndLength_3  = 57; //43; //57;
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 261;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 3;
+      ul_carrierBandwidth                                            = 32;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 8525;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 3;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 52;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 7;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 7;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 3,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+      # pusch-ConfigCommon (up to 16 elements)
+        initialULBWPk2_0                      = 6;
+        initialULBWPmappingType_0             = 1
+        # this is SS=0 L=11
+        initialULBWPstartSymbolAndLength_0    = 55;
+
+        initialULBWPk2_1                      = 6;
+        initialULBWPmappingType_1             = 1;
+        # this is SS=0 L=12
+        initialULBWPstartSymbolAndLength_1    = 69;
+
+        initialULBWPk2_2                      = 14;
+        initialULBWPmappingType_2             = 1;
+        # this is SS=10 L=4
+        initialULBWPstartSymbolAndLength_2    = 52;
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 3;
+      ssb_PositionsInBurst_Bitmap                                   = 0x0001000100010001L;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 3;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 3;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 3;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+  ssPBCH_BlockPower                                             = 10;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.18.99";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2 = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "192.168.18.199";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.18.198/24";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.18.198/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "192.168.18.198/24";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+	pusch_proc_threads = 8;
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1;
+         nb_rx          = 1;
+         att_tx         = 0;
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 75;
+         eNB_instances  = [0];
+	 sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
+         if_freq = 5124520000L;
+	 clock_src = "external";
+	 time_src = "external";
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/gnb.band66.tm1.106PRB.usrpn300.conf

@@ -0,0 +1,293 @@
+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 0;
+    pdsch_AntennaPorts                                        = 1;
+    pusch_AntennaPorts                                        = 1;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 2150 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 433096;
+      dl_frequencyBand                                                 = 66;
+      # this is 2150 MHz
+      dl_absoluteFrequencyPointA                                       = 430000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=50 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 13475;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 12;
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+        #pdschTimeDomainAllocationList (up to 16 entries)
+             initialDLBWPk0_0                    = 0;
+             #initialULBWPmappingType
+       #0=typeA,1=typeB
+             initialDLBWPmappingType_0           = 0;
+             #this is SS=1,L=13
+             initialDLBWPstartSymbolAndLength_0  = 40;
+
+             initialDLBWPk0_1                    = 0;
+             initialDLBWPmappingType_1           = 0;
+             #this is SS=2,L=12
+             initialDLBWPstartSymbolAndLength_1  = 53;
+
+             initialDLBWPk0_2                    = 0;
+             initialDLBWPmappingType_2           = 0;
+             #this is SS=1,L=12
+             initialDLBWPstartSymbolAndLength_2  = 54;
+
+             initialDLBWPk0_3                    = 0;
+             initialDLBWPmappingType_3           = 0;
+             #this is SS=1,L=4
+             initialDLBWPstartSymbolAndLength_3  = 57;
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 66;
+      ul_absoluteFrequencyPointA                                       = 350000;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 13475;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+      # pusch-ConfigCommon (up to 16 elements)
+        initialULBWPk2_0                      = 6;
+        initialULBWPmappingType_0             = 1
+        # this is SS=0 L=11
+        initialULBWPstartSymbolAndLength_0    = 55;
+
+  initialULBWPk2_1                      = 6;
+        initialULBWPmappingType_1             = 1;
+        # this is SS=0 L=12
+        initialULBWPstartSymbolAndLength_1    = 69;
+
+        initialULBWPk2_2                      = 7;
+        initialULBWPmappingType_2             = 1;
+        # this is SS=10 L=4
+        initialULBWPstartSymbolAndLength_2    = 52;
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+MACRLCs = (
+  {
+  num_cc = 1;
+  tr_s_preference = "local_L1";
+  tr_n_preference = "local_RRC";
+  }
+);
+
+L1s = (
+  {
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+  pusch_proc_threads = 8;
+  }
+);
+
+RUs = (
+    {
+       local_rf       = "yes"
+         nb_tx          = 1;
+         nb_rx          = 1;
+         att_tx         = 0;
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 75;
+         eNB_instances  = [0];
+         ##beamforming 1x2 matrix: 1 layer x 2 antennas
+         bf_weights = [0x00007fff, 0x0000];
+         ##beamforming 1x4 matrix: 1 layer x 4 antennas
+         #bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
+         ## beamforming 2x2 matrix:
+         # bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
+         ## beamforming 4x4 matrix:
+         #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
+
+         sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
+         clock_src = "external";
+         # if_freq = 3700000000L;
+         # if_offset = 1000000;
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf

@@ -23,7 +23,8 @@ gNBs =
 
     ssb_SubcarrierOffset                                      = 0;
     pdsch_AntennaPorts                                        = 1;
-	
+    pusch_AntennaPorts                                        = 1;
+
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -45,8 +46,8 @@ gNBs =
         dl_carrierBandwidth                                            = 106;
      #initialDownlinkBWP
       #genericParameters
-        # this is RBstart=0,L=50 (275*(L-1))+RBstart
-        initialDLBWPlocationAndBandwidth                                        = 13475;
+        # this is RBstart=41,L=24 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6368;
 # subcarrierSpacing
 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
         initialDLBWPsubcarrierSpacing                                           = 1;
@@ -59,7 +60,7 @@ gNBs =
              #initialULBWPmappingType
 	     #0=typeA,1=typeB
              initialDLBWPmappingType_0           = 0;
-             #this is SS=2,L=3
+             #this is SS=1,L=13
              initialDLBWPstartSymbolAndLength_0  = 40;
 
              initialDLBWPk0_1                    = 0;
@@ -74,7 +75,7 @@ gNBs =
 
              initialDLBWPk0_3                    = 0;
              initialDLBWPmappingType_3           = 0;
-             #this is SS=1,L=4
+             #this is SS=1,L=5
              initialDLBWPstartSymbolAndLength_3  = 57;
 
   #uplinkConfigCommon 
@@ -89,7 +90,7 @@ gNBs =
       pMax                                                          = 20;
      #initialUplinkBWP
       #genericParameters
-        initialULBWPlocationAndBandwidth                                        = 13475;
+        initialULBWPlocationAndBandwidth                                        = 6368;
 # subcarrierSpacing
 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
         initialULBWPsubcarrierSpacing                                           = 1;
@@ -126,17 +127,17 @@ gNBs =
         # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
         #  
         msg1_SubcarrierSpacing                                      = 1,
-
 # restrictedSetConfig
 # 0=unrestricted, 1=restricted type A, 2=restricted type B
         restrictedSetConfig                                         = 0,
+
       # pusch-ConfigCommon (up to 16 elements)
-        initialULBWPk2_0                      = 2;
+        initialULBWPk2_0                      = 6;
         initialULBWPmappingType_0             = 1
         # this is SS=0 L=11
         initialULBWPstartSymbolAndLength_0    = 55;
- 	
-	initialULBWPk2_1                      = 2;
+
+        initialULBWPk2_1                      = 6;
         initialULBWPmappingType_1             = 1;
         # this is SS=0 L=12
         initialULBWPstartSymbolAndLength_1    = 69;
@@ -145,7 +146,7 @@ gNBs =
         initialULBWPmappingType_2             = 1;
         # this is SS=10 L=4
         initialULBWPstartSymbolAndLength_2    = 52;
-	
+
         msg3_DeltaPreamble                                          = 1;
         p0_NominalWithGrant                                         =-90;
 
@@ -186,7 +187,7 @@ gNBs =
       nrofUplinkSlots                                               = 2;
       nrofUplinkSymbols                                             = 4;
 
-  ssPBCH_BlockPower                                             = 10;
+      ssPBCH_BlockPower                                             = -25;
   }
 
   );
@@ -204,6 +205,7 @@ gNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -226,19 +228,20 @@ MACRLCs = (
 	num_cc = 1;
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
-        }  
+	}
 );
 
 L1s = (
-    	{
+	{
 	num_cc = 1;
 	tr_n_preference = "local_mac";
-        }  
+	pusch_proc_threads = 8;
+	}
 );
 
 RUs = (
     {		  
-       local_rf       = "yes"
+         local_rf       = "yes"
          nb_tx          = 1
          nb_rx          = 1
          att_tx         = 0
@@ -247,9 +250,16 @@ RUs = (
          max_pdschReferenceSignalPower = -27;
          max_rxgain                    = 75;
          eNB_instances  = [0];
-         #beamforming 1x4 matrix:
-         bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
-	 sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
+         ## beamforming 1x2 matrix: 1 layer x 2 antennas
+         bf_weights = [0x00007fff, 0x0000];
+         ## beamforming 1x4 matrix: 1 layer x 4 antennas
+         #bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
+         ## beamforming 2x2 matrix:
+         #bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
+         ## beamforming 4x4 matrix:
+         #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
+
+         sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
          clock_src = "external";
     }
 );  

ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf

@@ -2,6 +2,7 @@ Active_gNBs = ( "gNB-Eurecom-5GNRBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
+
 gNBs =
 (
  {
@@ -21,7 +22,11 @@ gNBs =
 
     ssb_SubcarrierOffset                                      = 31; //0;
     pdsch_AntennaPorts                                        = 1;
-  
+    pusch_AntennaPorts                                        = 1;
+    pusch_TargetSNRx10                                        = 200; 
+    pucch_TargetSNRx10                                        = 200;
+
+ 
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -44,7 +49,7 @@ gNBs =
      #initialDownlinkBWP
       #genericParameters
         # this is RBstart=84,L=13 (275*(L-1))+RBstart
-        initialDLBWPlocationAndBandwidth                                        = 6366; //28875; //6366; #6407; #3384;
+        initialDLBWPlocationAndBandwidth                                        = 6368;
 # subcarrierSpacing
 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
         initialDLBWPsubcarrierSpacing                                           = 1;
@@ -86,7 +91,7 @@ gNBs =
       pMax                                                          = 20;
      #initialUplinkBWP
       #genericParameters
-        initialULBWPlocationAndBandwidth                                        = 6366; //28875; //6366; #6407; #3384;
+        initialULBWPlocationAndBandwidth                                        = 6368;
 # subcarrierSpacing
 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
         initialULBWPsubcarrierSpacing                                           = 1;
@@ -201,6 +206,7 @@ gNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -210,6 +216,8 @@ gNBs =
     enable_x2 = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
     target_enb_x2_ip_address      = (
                                      { ipv4       = "CI_FR1_CTL_ENB_IP_ADDR";
                                        ipv6       = "192:168:30::17";
@@ -243,6 +251,7 @@ L1s = (
       {
   num_cc = 1;
   tr_n_preference = "local_mac";
+  pusch_proc_threads = 6;
         }  
 );
 
@@ -257,7 +266,7 @@ RUs = (
          max_pdschReferenceSignalPower = -27;
          max_rxgain                    = 114;
          eNB_instances  = [0];
-         clock_src = "external";
+#         clock_src = "external";
     }
 );  
 
@@ -289,3 +298,6 @@ THREAD_STRUCT = (
        rrc_log_verbosity                     ="medium";
     };
 
+uicc: {
+opc = "testopc";
+};

ci-scripts/conf_files/lte-fdd-basic-sim.conf

@@ -173,6 +173,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -184,6 +185,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {

ci-scripts/conf_files/lte-fdd-fembms-basic-sim.conf

@@ -174,6 +174,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -185,6 +186,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
  ////////// MCE parameters:
     target_mce_m2_ip_address      = ( { ipv4       = "127.0.0.7";

ci-scripts/conf_files/lte-fdd-mbms-basic-sim.conf

@@ -174,6 +174,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -185,6 +186,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
  ////////// MCE parameters:
     target_mce_m2_ip_address      = ( { ipv4       = "127.0.0.7";

ci-scripts/conf_files/lte-tdd-basic-sim.conf

@@ -136,6 +136,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -147,6 +148,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {

ci-scripts/conf_files/rcc.band38.tm1.50PRB.multi.rru.conf

@@ -141,6 +141,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }

ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -139,6 +139,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -150,6 +151,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -232,7 +235,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -139,6 +139,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -150,6 +151,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -232,7 +235,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -139,6 +139,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -150,6 +151,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -232,7 +235,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf

@@ -176,6 +176,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -187,6 +188,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -251,7 +254,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf

@@ -176,6 +176,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -187,6 +188,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -251,7 +254,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf

@@ -176,6 +176,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -187,6 +188,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {
@@ -251,7 +254,7 @@ NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
     FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band7.tm1.mbms-s1ap.if4p5.50PRB.lo.conf

@@ -144,6 +144,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "192.168.15.130";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -155,6 +156,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
 
     ////////// MCE parameters:

ci-scripts/conf_files/rcc.band7.tm1.mbms.if4p5.50PRB.lo.conf

@@ -144,6 +144,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "127.0.0.3";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -155,6 +156,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
 
     ////////// MCE parameters:

ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf

@@ -174,6 +174,7 @@ eNBs =
     ////////// MME parameters:
     mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
+                              port       = 36412 ;
                               active     = "yes";
                               preference = "ipv4";
                             }
@@ -185,6 +186,8 @@ eNBs =
     enable_x2 = "no";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
 
     NETWORK_INTERFACES :
     {

ci-scripts/conf_files/rru.fdd.band7.conf

@@ -1,23 +1,25 @@
-RUs = (
-    {
-        local_if_name                    = "lo";
-        remote_address                   = "127.0.0.1"
-        local_address                    = "127.0.0.2";
-        local_portc                       = 50000;
-        remote_portc                      = 50000;
-        local_portd                       = 50001;
-        remote_portd                      = 50001;
-        local_rf                         = "yes"
-        tr_preference                    = "udp_if4p5";
-        nb_tx                            = 1;
-        nb_rx                            = 1;
-        max_pdschReferenceSignalPower    = -27;
-        max_rxgain                       = 115;
-        bands                            = [7];
-    }
+RUs =
+(
+  {
+    local_if_name                 = "lo";
+    remote_address                = "127.0.0.1"
+    local_address                 = "127.0.0.2";
+    local_portc                   = 50000;
+    remote_portc                  = 50000;
+    local_portd                   = 50001;
+    remote_portd                  = 50001;
+    local_rf                      = "yes"
+    tr_preference                 = "udp_if4p5";
+    nb_tx                         = 1;
+    nb_rx                         = 1;
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    bands                         = [7];
+  }
 );
 
-THREAD_STRUCT = (
+THREAD_STRUCT =
+(
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
     parallel_config    = "PARALLEL_SINGLE_THREAD";
@@ -26,19 +28,20 @@ THREAD_STRUCT = (
   }
 );
 
-log_config = {
-      global_log_level                      ="error";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="error";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="error";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="error";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="error";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="error";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="error";
-      rrc_log_verbosity                     ="medium";
+log_config =
+{
+  global_log_level      ="error";
+  global_log_verbosity  ="medium";
+  hw_log_level          ="error";
+  hw_log_verbosity      ="medium";
+  phy_log_level         ="error";
+  phy_log_verbosity     ="medium";
+  mac_log_level         ="error";
+  mac_log_verbosity     ="high";
+  rlc_log_level         ="error";
+  rlc_log_verbosity     ="medium";
+  pdcp_log_level        ="error";
+  pdcp_log_verbosity    ="medium";
+  rrc_log_level         ="error";
+  rrc_log_verbosity     ="medium";
 };

ci-scripts/conf_files/rru.tdd.band40.conf

@@ -1,23 +1,25 @@
-RUs = (
-    {
-        local_if_name                    = "lo";
-        remote_address                   = "127.0.0.1"
-        local_address                    = "127.0.0.2";
-        local_portc                       = 50000;
-        remote_portc                      = 50000;
-        local_portd                       = 50001;
-        remote_portd                      = 50001;
-        local_rf                         = "yes"
-        tr_preference                    = "udp_if4p5";
-        nb_tx                            = 1;
-        nb_rx                            = 1;
-        max_pdschReferenceSignalPower    = -27;
-        max_rxgain                       = 115;
-        bands                            = [40];
-    }
+RUs =
+(
+  {
+    local_if_name                 = "lo";
+    remote_address                = "127.0.0.1"
+    local_address                 = "127.0.0.2";
+    local_portc                   = 50000;
+    remote_portc                  = 50000;
+    local_portd                   = 50001;
+    remote_portd                  = 50001;
+    local_rf                      = "yes"
+    tr_preference                 = "udp_if4p5";
+    nb_tx                         = 1;
+    nb_rx                         = 1;
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    bands                         = [40];
+  }
 );
 
-THREAD_STRUCT = (
+THREAD_STRUCT =
+(
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
     parallel_config    = "PARALLEL_SINGLE_THREAD";
@@ -26,19 +28,20 @@ THREAD_STRUCT = (
   }
 );
 
-log_config = {
-      global_log_level                      ="error";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="error";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="error";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="error";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="error";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="error";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="error";
-      rrc_log_verbosity                     ="medium";
+log_config =
+{
+  global_log_level      ="error";
+  global_log_verbosity  ="medium";
+  hw_log_level          ="error";
+  hw_log_verbosity      ="medium";
+  phy_log_level         ="error";
+  phy_log_verbosity     ="medium";
+  mac_log_level         ="error";
+  mac_log_verbosity     ="high";
+  rlc_log_level         ="error";
+  rlc_log_verbosity     ="medium";
+  pdcp_log_level        ="error";
+  pdcp_log_verbosity    ="medium";
+  rrc_log_level         ="error";
+  rrc_log_verbosity     ="medium";
 };

ci-scripts/constants.py

@@ -59,6 +59,7 @@ OAI_UE_PROCESS_NO_TUNNEL_INTERFACE = -24
 OAI_UE_PROCESS_SEG_FAULT = -25
 OAI_UE_PROCESS_NO_MBMS_MSGS = -26
 OAI_UE_PROCESS_OK = +6
+INVALID_PARAMETER = -50
 
 UE_STATUS_DETACHED = 0
 UE_STATUS_DETACHING = 1

ci-scripts/cppcheck_suppressions.list

@@ -84,6 +84,12 @@ nullPointer:common/utils/T/tracer/multi.c:265
 arrayIndexOutOfBounds:openair2/LAYER2/rlc_v2/tests/test.c:401
 //
 //-----------------------------------------------------------------------------
+// this file is used for testing the NR RLC implementation, this error is
+// not a problem, the programmer has to know what she does when writing
+// the tests
+arrayIndexOutOfBounds:openair2/LAYER2/nr_rlc/tests/test.c:451
+//
+//-----------------------------------------------------------------------------
 // cppcheck does not understand the different lengths of arrays
 arrayIndexOutOfBounds:openair1/SIMULATION/TOOLS/random_channel.c:705
 arrayIndexOutOfBounds:openair1/SIMULATION/TOOLS/random_channel.c:706

ci-scripts/createVM.sh

@@ -87,6 +87,12 @@ function create_vm {
     echo "VM_CPU              = $VM_CPU"
     echo "VM_DISK             = $VM_DISK GBytes"
 
+    if [[ "$VM_NAME" == *"-enb-usrp"* ]] || [[ "$VM_NAME" == *"-cppcheck"* ]]
+    then
+        echo "This VM type is no longer supported in the pipeline framework"
+        return
+    fi
+
     echo "############################################################"
     echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
     echo "############################################################"

ci-scripts/docker/Dockerfile.cppcheck.xenial

@@ -0,0 +1,31 @@
+FROM ubuntu:xenial AS oai-cppcheck
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+       build-essential \
+       vim \
+       cppcheck
+
+WORKDIR /oai-ran
+COPY . .
+
+WORKDIR /oai-ran/common/utils/T
+RUN make
+
+WORKDIR /oai-ran
+RUN mkdir -p cmake_targets/log && \
+    cppcheck --enable=warning --force --xml --xml-version=2 \
+        -i openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c \
+        --suppressions-list=ci-scripts/cppcheck_suppressions.list \
+        -I common/utils \
+        -I openair3/NAS/COMMON/UTIL \
+        -j`nproc` . 2> cmake_targets/log/cppcheck.xml 1> cmake_targets/log/cppcheck_build.txt
+
+RUN egrep -c 'severity="error' cmake_targets/log/cppcheck.xml
+
+RUN egrep -c 'severity="warning' cmake_targets/log/cppcheck.xml
+
+RUN cat cmake_targets/log/cppcheck.xml

ci-scripts/docker_log_split.py

@@ -0,0 +1,92 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+# Python for CI of OAI-eNB + COTS-UE
+#
+#   Required Python Version
+#     Python 3.x
+#
+#   Required Python Package
+#     pexpect
+#---------------------------------------------------------------------
+
+
+#-----------------------------------------------------------
+# Import Libs
+#-----------------------------------------------------------
+import sys		# arg
+import re		# reg
+import os
+import subprocess
+
+
+class SplitReport():
+	def __init__(self):
+		self.logfilename = ''
+		self.destinationFolder = ''
+
+	def split(self):
+		self.destinationFolder = self.logfilename.replace(".log","")
+		if os.path.isfile(self.logfilename):
+			newImageLog = open(self.logfilename + '.new', 'w')
+			copyFlag = True
+			with open(self.logfilename, 'r') as imageLog:
+				for line in imageLog:
+					header = False
+					ret = re.search('====== Start of log for ([0-9\.A-Za-z\-\_]+) ======', line)
+					if ret is not None:
+						copyFlag = False
+						header = True
+						detailedLogFile = open(self.destinationFolder + '/' + ret.group(1), 'w')
+					if copyFlag:
+						newImageLog.write(line)
+					ret = re.search('====== End of log for ([0-9\.A-Za-z\-\_]+) ======', line)
+					if ret is not None:
+						copyFlag = True
+						detailedLogFile.close()
+					elif not copyFlag and not header:
+						detailedLogFile.write(line)
+			imageLog.close()
+			newImageLog.close()
+			os.rename(self.logfilename + '.new', self.logfilename)
+		else:
+			print('Cannot split unfound file')
+
+#--------------------------------------------------------------------------------------------------------
+#
+# Start of main
+#
+#--------------------------------------------------------------------------------------------------------
+
+argvs = sys.argv
+argc = len(argvs)
+
+SP = SplitReport()
+
+while len(argvs) > 1:
+	myArgv = argvs.pop(1)
+	if re.match('^\-\-logfilename=(.+)$', myArgv, re.IGNORECASE):
+		matchReg = re.match('^\-\-logfilename=(.+)$', myArgv, re.IGNORECASE)
+		SP.logfilename = matchReg.group(1)
+
+SP.split()
+
+sys.exit(0)

ci-scripts/epc.py

@@ -46,7 +46,6 @@ from multiprocessing import Process, Lock, SimpleQueue
 import sshconnection as SSH 
 import helpreadme as HELP
 import constants as CONST
-import html
 
 #-----------------------------------------------------------
 # Class Declaration
@@ -61,17 +60,18 @@ class EPCManagement():
 		self.SourceCodePath = ''
 		self.Type = ''
 		self.PcapFileName = ''
-		self.htmlObj = None
 		self.testCase_id = ''
 		self.MmeIPAddress = ''
 		self.containerPrefix = 'prod'
+		self.mmeConfFile = 'mme.conf'
+		self.yamlPath = ''
 
 
 #-----------------------------------------------------------
 # EPC management functions
 #-----------------------------------------------------------
 
-	def InitializeHSS(self):
+	def InitializeHSS(self, HTML):
 		if self.IPAddress == '' or self.UserName == '' or self.Password == '' or self.SourceCodePath == '' or self.Type == '':
 			HELP.GenericHelp(CONST.Version)
 			HELP.EPCSrvHelp(self.IPAddress, self.UserName, self.Password, self.SourceCodePath, self.Type)
@@ -113,10 +113,9 @@ class EPCManagement():
 		else:
 			logging.error('This option should not occur!')
 		mySSH.close()
-		if self.htmlObj is not None:
-			self.htmlObj.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
 
-	def InitializeMME(self):
+	def InitializeMME(self, HTML):
 		if self.IPAddress == '' or self.UserName == '' or self.Password == '' or self.SourceCodePath == '' or self.Type == '':
 			HELP.GenericHelp(CONST.Version)
 			HELP.EPCSrvHelp(self.IPAddress, self.UserName, self.Password, self.SourceCodePath, self.Type)
@@ -127,7 +126,7 @@ class EPCManagement():
 			logging.debug('Using the OAI EPC Release 14 MME in Docker')
 			mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-mme /bin/bash -c "nohup tshark -i eth0 -i lo:s10 -w /tmp/mme_check_run.pcap 2>&1 > /dev/null"', '\$', 5)
 			time.sleep(5)
-			mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-mme /bin/bash -c "nohup ./bin/oai_mme -c ./etc/mme.conf > mme_check_run.log 2>&1"', '\$', 5)
+			mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-mme /bin/bash -c "nohup ./bin/oai_mme -c ./etc/' + self.mmeConfFile + ' > mme_check_run.log 2>&1"', '\$', 5)
 		elif re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE):
 			logging.debug('Using the OAI EPC Release 14 MME')
 			mySSH.command('cd ' + self.SourceCodePath + '/scripts', '\$', 5)
@@ -152,8 +151,7 @@ class EPCManagement():
 		else:
 			logging.error('This option should not occur!')
 		mySSH.close()
-		if self.htmlObj is not None:
-			self.htmlObj.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
 
 	def SetMmeIPAddress(self):
 		# Not an error if we don't need an EPC
@@ -174,7 +172,7 @@ class EPCManagement():
 		else:
 			self.MmeIPAddress = self.IPAddress
 
-	def InitializeSPGW(self):
+	def InitializeSPGW(self, HTML):
 		if self.IPAddress == '' or self.UserName == '' or self.Password == '' or self.SourceCodePath == '' or self.Type == '':
 			HELP.GenericHelp(CONST.Version)
 			HELP.EPCSrvHelp(self.IPAddress, self.UserName, self.Password, self.SourceCodePath, self.Type)
@@ -211,15 +209,14 @@ class EPCManagement():
 		else:
 			logging.error('This option should not occur!')
 		mySSH.close()
-		if self.htmlObj is not None:
-			self.htmlObj.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
 
 	def CheckHSSProcess(self, status_queue):
 		try:
 			mySSH = SSH.SSHConnection() 
 			mySSH.open(self.IPAddress, self.UserName, self.Password)
 			if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
-				mySSH.command('docker exec -it ' + self.containerPrefix + '-oai-hss /bin/bash -c "ps aux | grep oai_hss"', '\$', 5)
+				mySSH.command('docker top ' + self.containerPrefix + '-oai-hss', '\$', 5)
 			else:
 				mySSH.command('stdbuf -o0 ps -aux | grep --color=never hss | grep -v grep', '\$', 5)
 			if re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE) or re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
@@ -244,7 +241,7 @@ class EPCManagement():
 			mySSH = SSH.SSHConnection() 
 			mySSH.open(self.IPAddress, self.UserName, self.Password)
 			if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
-				mySSH.command('docker exec -it ' + self.containerPrefix + '-oai-mme /bin/bash -c "ps aux | grep oai_mme"', '\$', 5)
+				mySSH.command('docker top ' + self.containerPrefix + '-oai-mme', '\$', 5)
 			else:
 				mySSH.command('stdbuf -o0 ps -aux | grep --color=never mme | grep -v grep', '\$', 5)
 			if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
@@ -271,11 +268,11 @@ class EPCManagement():
 			mySSH = SSH.SSHConnection() 
 			mySSH.open(self.IPAddress, self.UserName, self.Password)
 			if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
-				mySSH.command('docker exec -it ' + self.containerPrefix + '-oai-spgwc /bin/bash -c "ps aux | grep oai_spgwc"', '\$', 5)
-				result = re.search('oai_spgwc -o -c ', mySSH.getBefore())
+				mySSH.command('docker top ' + self.containerPrefix + '-oai-spgwc', '\$', 5)
+				result = re.search('oai_spgwc -', mySSH.getBefore())
 				if result is not None:
-					mySSH.command('docker exec -it ' + self.containerPrefix + '-oai-spgwu-tiny /bin/bash -c "ps aux | grep oai_spgwu"', '\$', 5)
-					result = re.search('oai_spgwu -o -c ', mySSH.getBefore())
+					mySSH.command('docker top ' + self.containerPrefix + '-oai-spgwu-tiny', '\$', 5)
+					result = re.search('oai_spgwu -', mySSH.getBefore())
 			elif re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE):
 				mySSH.command('stdbuf -o0 ps -aux | grep --color=never spgw | grep -v grep', '\$', 5)
 				result = re.search('spgwu -c ', mySSH.getBefore())
@@ -296,7 +293,7 @@ class EPCManagement():
 		except:
 			os.kill(os.getppid(),signal.SIGUSR1)
 
-	def TerminateHSS(self):
+	def TerminateHSS(self, HTML):
 		mySSH = SSH.SSHConnection() 
 		mySSH.open(self.IPAddress, self.UserName, self.Password)
 		if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
@@ -329,10 +326,9 @@ class EPCManagement():
 		else:
 			logging.error('This should not happen!')
 		mySSH.close()
-		if self.htmlObj is not None:
-			self.htmlObj.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
 
-	def TerminateMME(self):
+	def TerminateMME(self, HTML):
 		mySSH = SSH.SSHConnection() 
 		mySSH.open(self.IPAddress, self.UserName, self.Password)
 		if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
@@ -356,10 +352,9 @@ class EPCManagement():
 		else:
 			logging.error('This should not happen!')
 		mySSH.close()
-		if self.htmlObj is not None:
-			self.htmlObj.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
 
-	def TerminateSPGW(self):
+	def TerminateSPGW(self, HTML):
 		mySSH = SSH.SSHConnection() 
 		mySSH.open(self.IPAddress, self.UserName, self.Password)
 		if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
@@ -400,8 +395,155 @@ class EPCManagement():
 		else:
 			logging.error('This should not happen!')
 		mySSH.close()
-		if self.htmlObj is not None:
-			self.htmlObj.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+
+	def DeployEpc(self, HTML):
+		logging.debug('Trying to deploy')
+		if not re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
+			HTML.CreateHtmlTestRow(self.Type, 'KO', CONST.INVALID_PARAMETER)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit('Deploy not possible with this EPC type: ' + self.Type)
+
+		if self.IPAddress == '' or self.UserName == '' or self.Password == '' or self.SourceCodePath == '' or self.Type == '':
+			HELP.GenericHelp(CONST.Version)
+			HELP.EPCSrvHelp(self.IPAddress, self.UserName, self.Password, self.SourceCodePath, self.Type)
+			sys.exit('Insufficient EPC Parameters')
+		mySSH = SSH.SSHConnection() 
+		mySSH.open(self.IPAddress, self.UserName, self.Password)
+		mySSH.command('docker-compose --version', '\$', 5)
+		result = re.search('docker-compose version 1', mySSH.getBefore())
+		if result is None:
+			mySSH.close()
+			HTML.CreateHtmlTestRow(self.Type, 'KO', CONST.INVALID_PARAMETER)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit('docker-compose not installed on ' + self.IPAddress)
+
+		mySSH.command('if [ -d ' + self.SourceCodePath + '/scripts ]; then echo ' + self.Password + ' | sudo -S rm -Rf ' + self.SourceCodePath + '/scripts ; fi', '\$', 5)
+		mySSH.command('if [ -d ' + self.SourceCodePath + '/logs ]; then echo ' + self.Password + ' | sudo -S rm -Rf ' + self.SourceCodePath + '/logs ; fi', '\$', 5)
+		mySSH.command('mkdir -p ' + self.SourceCodePath + '/scripts ' + self.SourceCodePath + '/logs', '\$', 5)
+
+		# deploying and configuring the cassandra database
+		# container names and services are currently hard-coded.
+		# they could be recovered by:
+		# - docker-compose config --services
+		# - docker-compose config | grep container_name
+		mySSH.command('cd ' + self.SourceCodePath + '/scripts', '\$', 5)
+		mySSH.copyout(self.IPAddress, self.UserName, self.Password, './' + self.yamlPath + '/docker-compose.yml', self.SourceCodePath + '/scripts')
+		mySSH.command('wget --quiet --tries=3 --retry-connrefused https://raw.githubusercontent.com/OPENAIRINTERFACE/openair-hss/develop/src/hss_rel14/db/oai_db.cql', '\$', 30)
+		mySSH.command('docker-compose down', '\$', 60)
+		mySSH.command('docker-compose up -d db_init', '\$', 60)
+
+		# databases take time...
+		time.sleep(10)
+		cnt = 0
+		db_init_status = False
+		while (cnt < 10):
+			mySSH.command('docker logs prod-db-init', '\$', 5)
+			result = re.search('OK', mySSH.getBefore())
+			if result is not None:
+				cnt = 10
+				db_init_status = True
+			else:
+				time.sleep(5)
+				cnt += 1
+		mySSH.command('docker rm -f prod-db-init', '\$', 5)
+		if not db_init_status:
+			HTML.CreateHtmlTestRow(self.Type, 'KO', CONST.INVALID_PARAMETER)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit('Cassandra DB deployment/configuration went wrong!')
+
+		# deploying EPC cNFs
+		mySSH.command('docker-compose up -d oai_spgwu', '\$', 60)
+		listOfContainers = 'prod-cassandra prod-oai-hss prod-oai-mme prod-oai-spgwc prod-oai-spgwu-tiny'
+		expectedHealthyContainers = 5
+
+		# Checking for additional services
+		mySSH.command('docker-compose config', '\$', 5)
+		configResponse = mySSH.getBefore()
+		if configResponse.count('flexran_rtc') == 1:
+			mySSH.command('docker-compose up -d flexran_rtc', '\$', 60)
+			listOfContainers += ' prod-flexran-rtc'
+			expectedHealthyContainers += 1
+		if configResponse.count('trf_gen') == 1:
+			mySSH.command('docker-compose up -d trf_gen', '\$', 60)
+			listOfContainers += ' prod-trf-gen'
+			expectedHealthyContainers += 1
+
+		# Checking if all are healthy
+		cnt = 0
+		while (cnt < 3):
+			mySSH.command('docker inspect --format=\'{{.State.Health.Status}}\' ' + listOfContainers, '\$', 10)
+			unhealthyNb = mySSH.getBefore().count('unhealthy')
+			healthyNb = mySSH.getBefore().count('healthy') - unhealthyNb
+			startingNb = mySSH.getBefore().count('starting')
+			if healthyNb == expectedHealthyContainers:
+				cnt = 10
+			else:
+				time.sleep(10)
+				cnt += 1
+		logging.debug(' -- ' + str(healthyNb) + ' healthy container(s)')
+		logging.debug(' -- ' + str(unhealthyNb) + ' unhealthy container(s)')
+		logging.debug(' -- ' + str(startingNb) + ' still starting container(s)')
+		if healthyNb == expectedHealthyContainers:
+			mySSH.command('docker exec -d prod-oai-hss /bin/bash -c "nohup tshark -i any -f \'port 9042 or port 3868\' -w /tmp/hss_check_run.pcap 2>&1 > /dev/null"', '\$', 5)
+			mySSH.command('docker exec -d prod-oai-mme /bin/bash -c "nohup tshark -i any -f \'port 3868 or port 2123 or port 36412\' -w /tmp/mme_check_run.pcap 2>&1 > /dev/null"', '\$', 10)
+			mySSH.command('docker exec -d prod-oai-spgwc /bin/bash -c "nohup tshark -i any -f \'port 2123 or port 8805\' -w /tmp/spgwc_check_run.pcap 2>&1 > /dev/null"', '\$', 10)
+			# on SPGW-U, not capturing on SGI to avoid huge file
+			mySSH.command('docker exec -d prod-oai-spgwu-tiny /bin/bash -c "nohup tshark -i any -f \'port 8805\'  -w /tmp/spgwu_check_run.pcap 2>&1 > /dev/null"', '\$', 10)
+			mySSH.close()
+			logging.debug('Deployment OK')
+			HTML.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
+		else:
+			mySSH.close()
+			logging.debug('Deployment went wrong')
+			HTML.CreateHtmlTestRow(self.Type, 'KO', CONST.INVALID_PARAMETER)
+
+	def UndeployEpc(self, HTML):
+		logging.debug('Trying to undeploy')
+		# No check down, we suppose everything done before.
+
+		mySSH = SSH.SSHConnection() 
+		mySSH.open(self.IPAddress, self.UserName, self.Password)
+		# Recovering logs and pcap files
+		mySSH.command('cd ' + self.SourceCodePath + '/logs', '\$', 5)
+		mySSH.command('docker exec -it prod-oai-hss /bin/bash -c "killall --signal SIGINT oai_hss tshark"', '\$', 5)
+		mySSH.command('docker exec -it prod-oai-mme /bin/bash -c "killall --signal SIGINT tshark"', '\$', 5)
+		mySSH.command('docker exec -it prod-oai-spgwc /bin/bash -c "killall --signal SIGINT oai_spgwc tshark"', '\$', 5)
+		mySSH.command('docker exec -it prod-oai-spgwu-tiny /bin/bash -c "killall --signal SIGINT tshark"', '\$', 5)
+		mySSH.command('docker logs prod-oai-hss > hss_' + self.testCase_id + '.log', '\$', 5)
+		mySSH.command('docker logs prod-oai-mme > mme_' + self.testCase_id + '.log', '\$', 5)
+		mySSH.command('docker logs prod-oai-spgwc > spgwc_' + self.testCase_id + '.log', '\$', 5)
+		mySSH.command('docker logs prod-oai-spgwu-tiny > spgwu_' + self.testCase_id + '.log', '\$', 5)
+		mySSH.command('docker cp prod-oai-hss:/tmp/hss_check_run.pcap hss_' + self.testCase_id + '.pcap', '\$', 60)
+		mySSH.command('docker cp prod-oai-mme:/tmp/mme_check_run.pcap mme_' + self.testCase_id + '.pcap', '\$', 60)
+		mySSH.command('docker cp prod-oai-spgwc:/tmp/spgwc_check_run.pcap spgwc_' + self.testCase_id + '.pcap', '\$', 60)
+		mySSH.command('docker cp prod-oai-spgwu-tiny:/tmp/spgwu_check_run.pcap spgwu_' + self.testCase_id + '.pcap', '\$', 60)
+		# Remove all
+		mySSH.command('cd ' + self.SourceCodePath + '/scripts', '\$', 5)
+		listOfContainers = 'prod-cassandra prod-oai-hss prod-oai-mme prod-oai-spgwc prod-oai-spgwu-tiny'
+		nbContainers = 5
+		# Checking for additional services
+		mySSH.command('docker-compose config', '\$', 5)
+		configResponse = mySSH.getBefore()
+		if configResponse.count('flexran_rtc') == 1:
+			listOfContainers += ' prod-flexran-rtc'
+			nbContainers += 1
+		if configResponse.count('trf_gen') == 1:
+			listOfContainers += ' prod-trf-gen'
+			nbContainers += 1
+
+		mySSH.command('docker-compose down', '\$', 60)
+		mySSH.command('docker inspect --format=\'{{.State.Health.Status}}\' ' + listOfContainers, '\$', 10)
+		noMoreContainerNb = mySSH.getBefore().count('No such object')
+		mySSH.command('docker inspect --format=\'{{.Name}}\' prod-oai-public-net prod-oai-private-net', '\$', 10)
+		noMoreNetworkNb = mySSH.getBefore().count('No such object')
+		mySSH.close()
+		if noMoreContainerNb == nbContainers and noMoreNetworkNb == 2:
+			logging.debug('Undeployment OK')
+			HTML.CreateHtmlTestRow(self.Type, 'OK', CONST.ALL_PROCESSES_OK)
+		else:
+			logging.debug('Undeployment went wrong')
+			HTML.CreateHtmlTestRow(self.Type, 'KO', CONST.INVALID_PARAMETER)
 
 	def LogCollectHSS(self):
 		mySSH = SSH.SSHConnection() 
@@ -409,9 +551,17 @@ class EPCManagement():
 		mySSH.command('cd ' + self.SourceCodePath + '/scripts', '\$', 5)
 		mySSH.command('rm -f hss.log.zip', '\$', 5)
 		if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-hss:/openair-hss/hss_check_run.log .', '\$', 60)
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-hss:/tmp/hss_check_run.pcap .', '\$', 60)
-			mySSH.command('zip hss.log.zip hss_check_run.*', '\$', 60)
+			mySSH.command('docker inspect prod-oai-hss', '\$', 10)
+			result = re.search('No such object', mySSH.getBefore())
+			if result is not None:
+				mySSH.command('cd ../logs', '\$', 5)
+				mySSH.command('rm -f hss.log.zip', '\$', 5)
+				mySSH.command('zip hss.log.zip hss_*.*', '\$', 60)
+				mySSH.command('mv hss.log.zip ../scripts', '\$', 60)
+			else:
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-hss:/openair-hss/hss_check_run.log .', '\$', 60)
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-hss:/tmp/hss_check_run.pcap .', '\$', 60)
+				mySSH.command('zip hss.log.zip hss_check_run.*', '\$', 60)
 		elif re.match('OAI', self.Type, re.IGNORECASE) or re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE):
 			mySSH.command('zip hss.log.zip hss*.log', '\$', 60)
 			mySSH.command('echo ' + self.Password + ' | sudo -S rm hss*.log', '\$', 5)
@@ -431,9 +581,17 @@ class EPCManagement():
 		mySSH.command('cd ' + self.SourceCodePath + '/scripts', '\$', 5)
 		mySSH.command('rm -f mme.log.zip', '\$', 5)
 		if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-mme:/openair-mme/mme_check_run.log .', '\$', 60)
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-mme:/tmp/mme_check_run.pcap .', '\$', 60)
-			mySSH.command('zip mme.log.zip mme_check_run.*', '\$', 60)
+			mySSH.command('docker inspect prod-oai-mme', '\$', 10)
+			result = re.search('No such object', mySSH.getBefore())
+			if result is not None:
+				mySSH.command('cd ../logs', '\$', 5)
+				mySSH.command('rm -f mme.log.zip', '\$', 5)
+				mySSH.command('zip mme.log.zip mme_*.*', '\$', 60)
+				mySSH.command('mv mme.log.zip ../scripts', '\$', 60)
+			else:
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-mme:/openair-mme/mme_check_run.log .', '\$', 60)
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-mme:/tmp/mme_check_run.pcap .', '\$', 60)
+				mySSH.command('zip mme.log.zip mme_check_run.*', '\$', 60)
 		elif re.match('OAI', self.Type, re.IGNORECASE) or re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE):
 			mySSH.command('zip mme.log.zip mme*.log', '\$', 60)
 			mySSH.command('echo ' + self.Password + ' | sudo -S rm mme*.log', '\$', 5)
@@ -450,11 +608,19 @@ class EPCManagement():
 		mySSH.command('cd ' + self.SourceCodePath + '/scripts', '\$', 5)
 		mySSH.command('rm -f spgw.log.zip', '\$', 5)
 		if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE):
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwc:/openair-spgwc/spgwc_check_run.log .', '\$', 60)
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwu-tiny:/openair-spgwu-tiny/spgwu_check_run.log .', '\$', 60)
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwc:/tmp/spgwc_check_run.pcap .', '\$', 60)
-			mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwu-tiny:/tmp/spgwu_check_run.pcap .', '\$', 60)
-			mySSH.command('zip spgw.log.zip spgw*_check_run.*', '\$', 60)
+			mySSH.command('docker inspect prod-oai-mme', '\$', 10)
+			result = re.search('No such object', mySSH.getBefore())
+			if result is not None:
+				mySSH.command('cd ../logs', '\$', 5)
+				mySSH.command('rm -f spgw.log.zip', '\$', 5)
+				mySSH.command('zip spgw.log.zip spgw*.*', '\$', 60)
+				mySSH.command('mv spgw.log.zip ../scripts', '\$', 60)
+			else:
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwc:/openair-spgwc/spgwc_check_run.log .', '\$', 60)
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwu-tiny:/openair-spgwu-tiny/spgwu_check_run.log .', '\$', 60)
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwc:/tmp/spgwc_check_run.pcap .', '\$', 60)
+				mySSH.command('docker cp ' + self.containerPrefix + '-oai-spgwu-tiny:/tmp/spgwu_check_run.pcap .', '\$', 60)
+				mySSH.command('zip spgw.log.zip spgw*_check_run.*', '\$', 60)
 		elif re.match('OAI', self.Type, re.IGNORECASE) or re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE):
 			mySSH.command('zip spgw.log.zip spgw*.log', '\$', 60)
 			mySSH.command('echo ' + self.Password + ' | sudo -S rm spgw*.log', '\$', 5)

ci-scripts/html.py

@@ -64,6 +64,10 @@ class HTMLManagement():
 		self.htmlTabIcons = []
 		self.testXMLfiles = []
 
+		self.testUnstable = False
+		self.testMinStableId = '999999'
+		self.testStabilityPointReached = False
+
 		self.htmleNBFailureMsg = ''
 		self.htmlUEFailureMsg = ''
 
@@ -214,7 +218,7 @@ class HTMLManagement():
 				self.htmlFile.write('  <div id="build-tab" class="tab-pane fade">\n')
 			self.htmlFile.write('  <table class="table" border = "1">\n')
 			self.htmlFile.write('      <tr bgcolor = "#33CCFF" >\n')
-			self.htmlFile.write('        <th>Relative Time (ms)</th>\n')
+			self.htmlFile.write('        <th>Relative Time (s)</th>\n')
 			self.htmlFile.write('        <th>Test Id</th>\n')
 			self.htmlFile.write('        <th>Test Desc</th>\n')
 			self.htmlFile.write('        <th>Test Options</th>\n')
@@ -230,13 +234,20 @@ class HTMLManagement():
 
 	def CreateHtmlTabFooter(self, passStatus):
 		if ((not self.htmlFooterCreated) and (self.htmlHeaderCreated)):
+			testOkEvenIfUnstable = False
+			if self.testUnstable and not passStatus:
+				if self.testStabilityPointReached or self.testMinStableId == '999999':
+					testOkEvenIfUnstable = True
 			self.htmlFile = open('test_results.html', 'a')
 			self.htmlFile.write('      <tr>\n')
 			self.htmlFile.write('        <th bgcolor = "#33CCFF" colspan=3>Final Tab Status</th>\n')
 			if passStatus:
 				self.htmlFile.write('        <th bgcolor = "green" colspan=' + str(2 + self.htmlUEConnected) + '><font color="white">PASS <span class="glyphicon glyphicon-ok"></span> </font></th>\n')
 			else:
-				self.htmlFile.write('        <th bgcolor = "red" colspan=' + str(2 + self.htmlUEConnected) + '><font color="white">FAIL <span class="glyphicon glyphicon-remove"></span> </font></th>\n')
+				if testOkEvenIfUnstable:
+					self.htmlFile.write('        <th bgcolor = "orange" colspan=' + str(2 + self.htmlUEConnected) + '><font color="white">KNOWN UNSTABLE SCENARIO <span class="glyphicon glyphicon-exclamation-sign"></span> </font></th>\n')
+				else:
+					self.htmlFile.write('        <th bgcolor = "red" colspan=' + str(2 + self.htmlUEConnected) + '><font color="white">FAIL <span class="glyphicon glyphicon-remove"></span> </font></th>\n')
 			self.htmlFile.write('      </tr>\n')
 			self.htmlFile.write('  </table>\n')
 			self.htmlFile.write('  </div>\n')
@@ -246,7 +257,10 @@ class HTMLManagement():
 				cmd = "sed -i -e 's/__STATE_" + self.htmlTabNames[0] + "__//' test_results.html"
 				subprocess.run(cmd, shell=True)
 			else:
-				cmd = "sed -i -e 's/__STATE_" + self.htmlTabNames[0] + "__/<span class=\"glyphicon glyphicon-remove\"><\/span>/' test_results.html"
+				if testOkEvenIfUnstable:
+					cmd = "sed -i -e 's/__STATE_" + self.htmlTabNames[0] + "__/<span class=\"glyphicon glyphicon-exclamation-sign\"><\/span>/' test_results.html"
+				else:
+					cmd = "sed -i -e 's/__STATE_" + self.htmlTabNames[0] + "__/<span class=\"glyphicon glyphicon-remove\"><\/span>/' test_results.html"
 				subprocess.run(cmd, shell=True)
 		self.htmlFooterCreated = False
 
@@ -385,6 +399,53 @@ class HTMLManagement():
 		self.htmlFile.write('      </tr>\n')
 		self.htmlFile.close()
 
+
+	def CreateHtmlNextTabHeaderTestRow(self, collectInfo, allImagesSize, machine='eNB'):
+		if (self.htmlFooterCreated or (not self.htmlHeaderCreated)):
+			return
+		self.htmlFile = open('test_results.html', 'a')
+		if bool(collectInfo) == False:
+			self.htmlFile.write('      <tr bgcolor = "red" >\n')
+			self.htmlFile.write('        <td colspan=' + str(5+self.htmlUEConnected) + '><b> ----IMAGES BUILDING FAILED - Unable to recover the image logs ---- </b></td>\n')
+			self.htmlFile.write('      </tr>\n')
+		else:
+			for image in collectInfo:
+				files = collectInfo[image]
+        		# TabHeader for image logs on built shared and target images
+				self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
+				self.htmlFile.write('        <td colspan=' + str(5+self.htmlUEConnected) + '><b> ---- ' + image  + ' IMAGE STATUS ----> Size ' + allImagesSize[image] + ' </b></td>\n')
+				self.htmlFile.write('      </tr>\n')
+				self.htmlFile.write('      <tr bgcolor = "#33CCFF" >\n')
+				self.htmlFile.write('        <th colspan="2">Element</th>\n')
+				self.htmlFile.write('        <th>Nb Errors</th>\n')
+				self.htmlFile.write('        <th>Nb Warnings</th>\n')
+				self.htmlFile.write('        <th colspan=' + str(1+self.htmlUEConnected) + '>Status</th>\n')
+				self.htmlFile.write('      </tr>\n')
+
+				for fil in files:
+					parameters = files[fil]
+					# TestRow for image logs on built shared and target images
+					self.htmlFile.write('      <tr>\n')
+					self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" >' + fil  + ' </td>\n')
+					if (parameters['errors'] == 0):
+						self.htmlFile.write('        <td bgcolor = "green" >' + str(parameters['errors'])  + '</td>\n')
+					else:
+						self.htmlFile.write('        <td bgcolor = "red" >' + str(parameters['errors'])  + '</td>\n')
+					if (parameters['warnings'] == 0):
+						self.htmlFile.write('        <td bgcolor = "green" >' + str(parameters['warnings'])  + '</td>\n')
+					elif ((parameters['warnings'] > 0) and (parameters['warnings'] <= 20)):
+						self.htmlFile.write('        <td bgcolor = "orange" >' + str(parameters['warnings'])  + '</td>\n')
+					else:
+						self.htmlFile.write('        <td bgcolor = "red" >' + str(parameters['warnings'])  + '</td>\n')	
+					if (parameters['errors'] == 0) and (parameters['warnings'] == 0):
+						self.htmlFile.write('        <th colspan=' + str(1+self.htmlUEConnected) + ' bgcolor = "green" ><font color="white">OK </font></th>\n')
+					elif (parameters['errors'] == 0) and ((parameters['warnings'] > 0) and (parameters['warnings'] <= 20)):
+						self.htmlFile.write('        <th colspan=' + str(1+self.htmlUEConnected) + ' bgcolor = "orange" ><font color="white">OK </font></th>\n')
+					else:
+						self.htmlFile.write('        <th colspan=' + str(1+self.htmlUEConnected) + ' bgcolor = "red" > NOT OK  </th>\n')	
+					self.htmlFile.write('      </tr>\n')
+		self.htmlFile.close()
+
 	def CreateHtmlTestRowQueue(self, options, status, ue_status, ue_queue):
 		if ((not self.htmlFooterCreated) and (self.htmlHeaderCreated)):
 			self.htmlFile = open('test_results.html', 'a')
@@ -418,3 +479,88 @@ class HTMLManagement():
 			self.htmlFile.write('      </tr>\n')
 			self.htmlFile.close()
 
+	def CreateHtmlTestRowCppCheckResults(self, CCR):
+		if (self.htmlFooterCreated or (not self.htmlHeaderCreated)):
+			return
+		self.htmlFile = open('test_results.html', 'a')
+		vId = 0
+		for version in CCR.versions:
+			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
+			self.htmlFile.write('        <td colspan=' + str(5+self.htmlUEConnected) + '><b> Results for cppcheck v ' + version + ' </b></td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> NB ERRORS</b></td>\n')
+			if CCR.nbErrors[vId] == 0:
+				myColor = 'lightgreen'
+			elif CCR.nbErrors[vId] < 20:
+				myColor = 'orange'
+			else:
+				myColor = 'lightcoral'
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + ' bgcolor = "' + myColor + '"><b>' + str(CCR.nbErrors[vId]) + '</b></td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> NB WARNINGS</b></td>\n')
+			if CCR.nbWarnings[vId] == 0:
+				myColor = 'lightgreen'
+			elif CCR.nbWarnings[vId] < 20:
+				myColor = 'orange'
+			else:
+				myColor = 'lightcoral'
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + ' bgcolor = "' + myColor + '"><b>' + str(CCR.nbWarnings[vId]) + '</b></td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
+			self.htmlFile.write('        <td colspan=' + str(5+self.htmlUEConnected) + '> ----------------- </td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Memory leak</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbMemLeaks[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Possible null pointer deference</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbNullPtrs[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Uninitialized variable</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbUninitVars[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Undefined behaviour shifting</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbTooManyBitsShift[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Signed integer overflow</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbIntegerOverflow[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
+			self.htmlFile.write('        <td colspan=' + str(5+self.htmlUEConnected) + '> </td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Printf formatting issues</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbInvalidPrintf[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Modulo result is predetermined</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbModuloAlways[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Opposite Condition -> dead code</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbOppoInnerCondition[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan=2 bgcolor = "lightcyan" ><b> Wrong Scanf Nb Args</b></td>\n')
+			self.htmlFile.write('        <td colspan=' + str(2+self.htmlUEConnected) + '>' + str(CCR.nbWrongScanfArg[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			vId += 1
+            
+		self.htmlFile.close()

ci-scripts/oai-ci-vm-tool

@@ -172,6 +172,7 @@ function setvar_usage {
 function variant__v1__enb_usrp {
     NB_PATTERN_FILES=9
     BUILD_OPTIONS="--eNB -w USRP --mu"
+    VM_MEMORY=3072
 }
     
 function variant__v2__basic_sim {
@@ -213,15 +214,15 @@ function variant__v6__nr_ue_usrp {
 function variant__v7__enb_ethernet {
     VM_MEMORY=4096
     ARCHIVES_LOC=enb_eth
-    NB_PATTERN_FILES=8
-    BUILD_OPTIONS="--eNB"
+    NB_PATTERN_FILES=9
+    BUILD_OPTIONS="--eNB -w USRP"
 }
 
 function variant__v8__ue_ethernet {
     VM_MEMORY=4096
     ARCHIVES_LOC=ue_eth
-    NB_PATTERN_FILES=12
-    BUILD_OPTIONS="--UE"
+    NB_PATTERN_FILES=13
+    BUILD_OPTIONS="--UE -w USRP"
 }
 
 function variant__v10__flexran_rtc {

ci-scripts/ran.py

@@ -42,10 +42,8 @@ from multiprocessing import Process, Lock, SimpleQueue
 # OAI Testing modules
 #-----------------------------------------------------------
 import sshconnection as SSH
-import epc 
 import helpreadme as HELP
 import constants as CONST
-import html
 
 #-----------------------------------------------------------
 # Class Declaration
@@ -77,19 +75,20 @@ class RANManagement():
 		self.backgroundBuildTestId = ['', '', '']
 		self.Build_eNB_forced_workspace_cleanup = False
 		self.Initialize_eNB_args = ''
+		self.imageKind = ''
 		self.air_interface = ['', '', ''] #changed from 'lte' to '' may lead to side effects in main
 		self.eNB_instance = 0
-		self.eNB_serverId = ''
+		self.eNB_serverId = ['', '', '']
 		self.eNBLogFiles = ['', '', '']
 		self.eNBOptions = ['', '', '']
 		self.eNBmbmsEnables = [False, False, False]
 		self.eNBstatuses = [-1, -1, -1]
 		self.flexranCtrlInstalled = False
 		self.flexranCtrlStarted = False
+		self.flexranCtrlDeployed = False
+		self.flexranCtrlIpAddress = ''
 		self.testCase_id = ''
 		self.epcPcapFile = ''
-		self.htmlObj = None
-		self.epcObj = None
 		self.runtime_stats= ''
 
 
@@ -98,21 +97,21 @@ class RANManagement():
 # RAN management functions
 #-----------------------------------------------------------
 
-	def BuildeNB(self):
+	def BuildeNB(self, HTML):
 		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
-		if self.eNB_serverId == '0':
+		if self.eNB_serverId[self.eNB_instance] == '0':
 			lIpAddr = self.eNBIPAddress
 			lUserName = self.eNBUserName
 			lPassWord = self.eNBPassword
 			lSourcePath = self.eNBSourceCodePath
-		elif self.eNB_serverId == '1':
+		elif self.eNB_serverId[self.eNB_instance] == '1':
 			lIpAddr = self.eNB1IPAddress
 			lUserName = self.eNB1UserName
 			lPassWord = self.eNB1Password
 			lSourcePath = self.eNB1SourceCodePath
-		elif self.eNB_serverId == '2':
+		elif self.eNB_serverId[self.eNB_instance] == '2':
 			lIpAddr = self.eNB2IPAddress
 			lUserName = self.eNB2UserName
 			lPassWord = self.eNB2Password
@@ -120,6 +119,7 @@ class RANManagement():
 		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
+		logging.debug('Building on server: ' + lIpAddr)
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
 		
@@ -133,14 +133,11 @@ class RANManagement():
 				self.air_interface[self.eNB_instance] = 'nr-softmodem'
 			else:
 				self.air_interface[self.eNB_instance] = 'lte-softmodem'
-				
+		
 		# Worakround for some servers, we need to erase completely the workspace
 		if self.Build_eNB_forced_workspace_cleanup:
 			mySSH.command('echo ' + lPassWord + ' | sudo -S rm -Rf ' + lSourcePath, '\$', 15)
-		if self.htmlObj is not None:
-			self.testCase_id = self.htmlObj.testCase_id
-		else:
-			self.testCase_id = '000000'
+		self.testCase_id = HTML.testCase_id
 		# on RedHat/CentOS .git extension is mandatory
 		result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
 		if result is not None:
@@ -181,8 +178,7 @@ class RANManagement():
 						mismatch = True
 				if not mismatch:
 					mySSH.close()
-					if self.htmlObj is not None:
-						self.htmlObj.CreateHtmlTestRow(self.Build_eNB_args, 'OK', CONST.ALL_PROCESSES_OK)
+					HTML.CreateHtmlTestRow(self.Build_eNB_args, 'OK', CONST.ALL_PROCESSES_OK)
 					return
 
 		mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
@@ -209,26 +205,25 @@ class RANManagement():
 			mySSH.command('echo ' + lPassWord + ' | sudo -S ls', '\$', 5)
 			mySSH.command('echo $USER; nohup sudo -E ./my-lte-softmodem-build.sh' + ' > ' + lSourcePath + '/cmake_targets/compile_oai_enb.log ' + ' 2>&1 &', lUserName, 5)
 			mySSH.close()
-			if self.htmlObj is not None:
-				self.htmlObj.CreateHtmlTestRow(self.Build_eNB_args, 'OK', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlTestRow(self.Build_eNB_args, 'OK', CONST.ALL_PROCESSES_OK)
 			self.backgroundBuildTestId[int(self.eNB_instance)] = self.testCase_id
 			return
 		mySSH.command('stdbuf -o0 ./build_oai ' + self.Build_eNB_args + ' 2>&1 | stdbuf -o0 tee compile_oai_enb.log', 'Bypassing the Tests|build have failed', 1500)
 		mySSH.close()
-		self.checkBuildeNB(lIpAddr, lUserName, lPassWord, lSourcePath, self.testCase_id)
+		self.checkBuildeNB(lIpAddr, lUserName, lPassWord, lSourcePath, self.testCase_id, HTML)
 
-	def WaitBuildeNBisFinished(self):
-		if self.eNB_serverId == '0':
+	def WaitBuildeNBisFinished(self, HTML):
+		if self.eNB_serverId[self.eNB_instance] == '0':
 			lIpAddr = self.eNBIPAddress
 			lUserName = self.eNBUserName
 			lPassWord = self.eNBPassword
 			lSourcePath = self.eNBSourceCodePath
-		elif self.eNB_serverId == '1':
+		elif self.eNB_serverId[self.eNB_instance] == '1':
 			lIpAddr = self.eNB1IPAddress
 			lUserName = self.eNB1UserName
 			lPassWord = self.eNB1Password
 			lSourcePath = self.eNB1SourceCodePath
-		elif self.eNB_serverId == '2':
+		elif self.eNB_serverId[self.eNB_instance] == '2':
 			lIpAddr = self.eNB2IPAddress
 			lUserName = self.eNB2UserName
 			lPassWord = self.eNB2Password
@@ -236,6 +231,7 @@ class RANManagement():
 		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
+		logging.debug('Waiting for end of build on server: ' + lIpAddr)
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
 		count = 40
@@ -243,17 +239,17 @@ class RANManagement():
 		while (count > 0) and buildOAIprocess:
 			mySSH.command('ps aux | grep --color=never build_ | grep -v grep', '\$', 6)
 			result = re.search('build_oai', mySSH.getBefore())
+			print(result)
 			if result is None:
 				buildOAIprocess = False
 			else:
 				count -= 1
 				time.sleep(30)
 		mySSH.close()
-		self.checkBuildeNB(lIpAddr, lUserName, lPassWord, lSourcePath, self.backgroundBuildTestId[int(self.eNB_instance)])
+		self.checkBuildeNB(lIpAddr, lUserName, lPassWord, lSourcePath, self.backgroundBuildTestId[int(self.eNB_instance)], HTML)
 
-	def checkBuildeNB(self, lIpAddr, lUserName, lPassWord, lSourcePath, testcaseId):
-		if self.htmlObj is not None:
-			self.htmlObj.testCase_id=testcaseId
+	def checkBuildeNB(self, lIpAddr, lUserName, lPassWord, lSourcePath, testcaseId, HTML):
+		HTML.testCase_id=testcaseId
 
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
@@ -284,7 +280,7 @@ class RANManagement():
 		mySSH.command('mkdir -p build_log_' + testcaseId, '\$', 5)
 		mySSH.command('mv log/* ' + 'build_log_' + testcaseId, '\$', 5)
 		mySSH.command('mv compile_oai_enb.log ' + 'build_log_' + testcaseId, '\$', 5)
-		if self.eNB_serverId != '0':
+		if self.eNB_serverId[self.eNB_instance] != '0':
 			mySSH.command('cd cmake_targets', '\$', 5)
 			mySSH.command('if [ -e tmp_build' + testcaseId + '.zip ]; then rm -f tmp_build' + testcaseId + '.zip; fi', '\$', 5)
 			mySSH.command('zip -r -qq tmp_build' + testcaseId + '.zip build_log_' + testcaseId, '\$', 5)
@@ -307,27 +303,25 @@ class RANManagement():
 		#generate logging info depending on buildStatus and air interface
 		if buildStatus:
 			logging.info('\u001B[1m Building OAI ' + self.air_interface[self.eNB_instance] + ' Pass\u001B[0m')
-			if self.htmlObj is not None:
-				self.htmlObj.CreateHtmlTestRow(self.Build_eNB_args, 'OK', CONST.ALL_PROCESSES_OK)		
+			HTML.CreateHtmlTestRow(self.Build_eNB_args, 'OK', CONST.ALL_PROCESSES_OK)
 		else:
 			logging.error('\u001B[1m Building OAI ' + self.air_interface[self.eNB_instance] + ' Failed\u001B[0m')
-			if self.htmlObj is not None:
-				self.htmlObj.CreateHtmlTestRow(self.Build_eNB_args, 'KO', CONST.ALL_PROCESSES_OK)
-				self.htmlObj.CreateHtmlTabFooter(False)
+			HTML.CreateHtmlTestRow(self.Build_eNB_args, 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlTabFooter(False)
 			sys.exit(1)
 
-	def InitializeeNB(self):
-		if self.eNB_serverId == '0':
+	def InitializeeNB(self, HTML, EPC):
+		if self.eNB_serverId[self.eNB_instance] == '0':
 			lIpAddr = self.eNBIPAddress
 			lUserName = self.eNBUserName
 			lPassWord = self.eNBPassword
 			lSourcePath = self.eNBSourceCodePath
-		elif self.eNB_serverId == '1':
+		elif self.eNB_serverId[self.eNB_instance] == '1':
 			lIpAddr = self.eNB1IPAddress
 			lUserName = self.eNB1UserName
 			lPassWord = self.eNB1Password
 			lSourcePath = self.eNB1SourceCodePath
-		elif self.eNB_serverId == '2':
+		elif self.eNB_serverId[self.eNB_instance] == '2':
 			lIpAddr = self.eNB2IPAddress
 			lUserName = self.eNB2UserName
 			lPassWord = self.eNB2Password
@@ -335,24 +329,21 @@ class RANManagement():
 		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
+		logging.debug('Starting eNB/gNB on server: ' + lIpAddr)
 
-		if self.htmlObj is not None:
-			self.testCase_id = self.htmlObj.testCase_id
-		else:
-			self.testCase_id = '000000'
+		self.testCase_id = HTML.testCase_id
 		mySSH = SSH.SSHConnection()
 		
 		if (self.pStatus < 0):
-			if self.htmlObj is not None:
-				self.htmlObj.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' ' + self.Initialize_eNB_args, 'KO', self.pStatus)
-				self.htmlObj.CreateHtmlTabFooter(False)
+			HTML.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' ' + self.Initialize_eNB_args, 'KO', self.pStatus)
+			HTML.CreateHtmlTabFooter(False)
 			sys.exit(1)
 		# If tracer options is on, running tshark on EPC side and capture traffic b/ EPC and eNB
 		result = re.search('T_stdout', str(self.Initialize_eNB_args))
-		if (result is not None) and (self.epcObj is not None):
-			localEpcIpAddr = self.epcObj.IPAddress
-			localEpcUserName = self.epcObj.UserName
-			localEpcPassword = self.epcObj.Password
+		if (result is not None):
+			localEpcIpAddr = EPC.IPAddress
+			localEpcUserName = EPC.UserName
+			localEpcPassword = EPC.Password
 			mySSH.open(localEpcIpAddr, localEpcUserName, localEpcPassword)
 			mySSH.command('ip addr show | awk -f /tmp/active_net_interfaces.awk | egrep -v "lo|tun"', '\$', 5)
 			result = re.search('interfaceToUse=(?P<eth_interface>[a-zA-Z0-9\-\_]+)done', mySSH.getBefore())
@@ -400,17 +391,17 @@ class RANManagement():
 				mySSH.command('echo ' + lPassWord + ' | sudo -S uhd_find_devices', '\$', 60)
 		# Make a copy and adapt to EPC / eNB IP addresses
 		mySSH.command('cp ' + full_config_file + ' ' + ci_full_config_file, '\$', 5)
-		if self.epcObj is not None:
-			localMmeIpAddr = self.epcObj.MmeIPAddress
-			mySSH.command('sed -i -e \'s/CI_MME_IP_ADDR/' + localMmeIpAddr + '/\' ' + ci_full_config_file, '\$', 2);
+		localMmeIpAddr = EPC.MmeIPAddress
+		mySSH.command('sed -i -e \'s/CI_MME_IP_ADDR/' + localMmeIpAddr + '/\' ' + ci_full_config_file, '\$', 2);
 		mySSH.command('sed -i -e \'s/CI_ENB_IP_ADDR/' + lIpAddr + '/\' ' + ci_full_config_file, '\$', 2);
 		mySSH.command('sed -i -e \'s/CI_GNB_IP_ADDR/' + lIpAddr + '/\' ' + ci_full_config_file, '\$', 2);
 		mySSH.command('sed -i -e \'s/CI_RCC_IP_ADDR/' + self.eNBIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
 		mySSH.command('sed -i -e \'s/CI_RRU1_IP_ADDR/' + self.eNB1IPAddress + '/\' ' + ci_full_config_file, '\$', 2);
 		mySSH.command('sed -i -e \'s/CI_RRU2_IP_ADDR/' + self.eNB2IPAddress + '/\' ' + ci_full_config_file, '\$', 2);
 		mySSH.command('sed -i -e \'s/CI_FR1_CTL_ENB_IP_ADDR/' + self.eNBIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
-		if self.flexranCtrlInstalled and self.flexranCtrlStarted:
+		if (self.flexranCtrlInstalled and self.flexranCtrlStarted) or self.flexranCtrlDeployed:
 			mySSH.command('sed -i -e \'s/FLEXRAN_ENABLED.*;/FLEXRAN_ENABLED        = "yes";/\' ' + ci_full_config_file, '\$', 2);
+			mySSH.command('sed -i -e \'s/CI_FLEXRAN_CTL_IP_ADDR/' + self.flexranCtrlIpAddress + '/\' ' + ci_full_config_file, '\$', 2);
 		else:
 			mySSH.command('sed -i -e \'s/FLEXRAN_ENABLED.*;/FLEXRAN_ENABLED        = "no";/\' ' + ci_full_config_file, '\$', 2);
 		self.eNBmbmsEnables[int(self.eNB_instance)] = False
@@ -427,7 +418,7 @@ class RANManagement():
 		# Launch eNB with the modified config file
 		mySSH.command('source oaienv', '\$', 5)
 		mySSH.command('cd cmake_targets', '\$', 5)
-		if self.air_interface == 'nr':
+		if self.air_interface[self.eNB_instance] == 'nr-softmodem':
 			mySSH.command('if [ -e rbconfig.raw ]; then echo ' + lPassWord + ' | sudo -S rm rbconfig.raw; fi', '\$', 5)
 			mySSH.command('if [ -e reconfig.raw ]; then echo ' + lPassWord + ' | sudo -S rm reconfig.raw; fi', '\$', 5)
 		# NOTE: WE SHALL do a check if the executable is present (in case build went wrong)
@@ -452,14 +443,13 @@ class RANManagement():
 				mySSH.close()
 				doLoop = False
 				logging.error('\u001B[1;37;41m eNB/gNB/ocp-eNB logging system did not show got sync! \u001B[0m')
-				if self.htmlObj is not None:
-					self.htmlObj.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' -O ' + config_file + extra_options, 'KO', CONST.ALL_PROCESSES_OK)
+				HTML.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' -O ' + config_file + extra_options, 'KO', CONST.ALL_PROCESSES_OK)
 				# In case of T tracer recording, we need to kill tshark on EPC side
 				result = re.search('T_stdout', str(self.Initialize_eNB_args))
-				if (result is not None) and (self.epcObj is not None):
-					localEpcIpAddr = self.epcObj.IPAddress
-					localEpcUserName = self.epcObj.UserName
-					localEpcPassword = self.epcObj.Password
+				if (result is not None):
+					localEpcIpAddr = EPC.IPAddress
+					localEpcUserName = EPC.UserName
+					localEpcPassword = EPC.Password
 					mySSH.open(localEpcIpAddr, localEpcUserName, localEpcPassword)
 					logging.debug('\u001B[1m Stopping tshark \u001B[0m')
 					mySSH.command('echo ' + localEpcPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
@@ -475,7 +465,7 @@ class RANManagement():
 				self.prematureExit = True
 				return
 			else:
-				mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting"', '\$', 4)
+				mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting|Started"', '\$', 4)
 				if rruCheck:
 					result = re.search('wait RUs', mySSH.getBefore())
 				else:
@@ -507,11 +497,10 @@ class RANManagement():
 				else:
 					logging.error('\u001B[1m oaitun_enm1 interface is either NOT mounted or NOT configured\u001B[0m')
 		if enbDidSync:
-			self.eNBstatuses[int(self.eNB_instance)] = int(self.eNB_serverId)
+			self.eNBstatuses[int(self.eNB_instance)] = int(self.eNB_serverId[self.eNB_instance])
 
 		mySSH.close()
-		if self.htmlObj is not None:
-			self.htmlObj.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' -O ' + config_file + extra_options, 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' -O ' + config_file + extra_options, 'OK', CONST.ALL_PROCESSES_OK)
 		logging.debug('\u001B[1m Initialize eNB/gNB/ocp-eNB Completed\u001B[0m')
 
 	def CheckeNBProcess(self, status_queue):
@@ -546,18 +535,18 @@ class RANManagement():
 		except:
 			os.kill(os.getppid(),signal.SIGUSR1)
 
-	def TerminateeNB(self):
-		if self.eNB_serverId == '0':
+	def TerminateeNB(self, HTML, EPC):
+		if self.eNB_serverId[self.eNB_instance] == '0':
 			lIpAddr = self.eNBIPAddress
 			lUserName = self.eNBUserName
 			lPassWord = self.eNBPassword
 			lSourcePath = self.eNBSourceCodePath
-		elif self.eNB_serverId == '1':
+		elif self.eNB_serverId[self.eNB_instance] == '1':
 			lIpAddr = self.eNB1IPAddress
 			lUserName = self.eNB1UserName
 			lPassWord = self.eNB1Password
 			lSourcePath = self.eNB1SourceCodePath
-		elif self.eNB_serverId == '2':
+		elif self.eNB_serverId[self.eNB_instance] == '2':
 			lIpAddr = self.eNB2IPAddress
 			lUserName = self.eNB2UserName
 			lPassWord = self.eNB2Password
@@ -565,6 +554,7 @@ class RANManagement():
 		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
+		logging.debug('Stopping eNB/gNB on server: ' + lIpAddr)
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
 		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
@@ -586,10 +576,10 @@ class RANManagement():
 		mySSH.close()
 		# If tracer options is on, stopping tshark on EPC side
 		result = re.search('T_stdout', str(self.Initialize_eNB_args))
-		if (result is not None) and (self.epcObj is not None):
-			localEpcIpAddr = self.epcObj.IPAddress
-			localEpcUserName = self.epcObj.UserName
-			localEpcPassword = self.epcObj.Password
+		if (result is not None):
+			localEpcIpAddr = EPC.IPAddress
+			localEpcUserName = EPC.UserName
+			localEpcPassword = EPC.Password
 			mySSH.open(localEpcIpAddr, localEpcUserName, localEpcPassword)
 			logging.debug('\u001B[1m Stopping tshark \u001B[0m')
 			mySSH.command('echo ' + localEpcPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
@@ -613,9 +603,8 @@ class RANManagement():
 			mySSH.close()
 			mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + extracted_log_file, '.')
 			logging.debug('\u001B[1m Analyzing eNB replay logfile \u001B[0m')
-			logStatus = self.AnalyzeLogFile_eNB(extracted_log_file)
-			if self.htmlObj is not None:
-				self.htmlObj.CreateHtmlTestRow(self.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
+			logStatus = self.AnalyzeLogFile_eNB(extracted_log_file, HTML)
+			HTML.CreateHtmlTestRow(self.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
 			self.eNBLogFiles[int(self.eNB_instance)] = ''
 		else:
 			analyzeFile = False
@@ -627,27 +616,23 @@ class RANManagement():
 				copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + fileToAnalyze, '.')
 				if (copyin_res == -1):
 					logging.debug('\u001B[1;37;41m Could not copy ' + nodeB_prefix + 'NB logfile to analyze it! \u001B[0m')
-					if self.htmlObj is not None:
-						self.htmlObj.htmleNBFailureMsg='Could not copy ' + nodeB_prefix + 'NB logfile to analyze it!'
-						self.htmlObj.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
+					HTML.htmleNBFailureMsg='Could not copy ' + nodeB_prefix + 'NB logfile to analyze it!'
+					HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
 					self.eNBmbmsEnables[int(self.eNB_instance)] = False
 					return
-				if self.eNB_serverId != '0':
+				if self.eNB_serverId[self.eNB_instance] != '0':
 					mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './' + fileToAnalyze, self.eNBSourceCodePath + '/cmake_targets/')
 				logging.debug('\u001B[1m Analyzing ' + nodeB_prefix + 'NB logfile \u001B[0m ' + fileToAnalyze)
-				logStatus = self.AnalyzeLogFile_eNB(fileToAnalyze)
+				logStatus = self.AnalyzeLogFile_eNB(fileToAnalyze, HTML)
 				if (logStatus < 0):
-					if self.htmlObj is not None:
-						self.htmlObj.CreateHtmlTestRow('N/A', 'KO', logStatus)
+					HTML.CreateHtmlTestRow('N/A', 'KO', logStatus)
 					self.preamtureExit = True
 					self.eNBmbmsEnables[int(self.eNB_instance)] = False
 					return
 				else:
-					if self.htmlObj is not None:
-						self.htmlObj.CreateHtmlTestRow(self.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
+					HTML.CreateHtmlTestRow(self.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
 			else:
-				if self.htmlObj is not None:
-					self.htmlObj.CreateHtmlTestRow(self.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
+				HTML.CreateHtmlTestRow(self.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
 		self.eNBmbmsEnables[int(self.eNB_instance)] = False
 		self.eNBstatuses[int(self.eNB_instance)] = -1
 
@@ -661,7 +646,7 @@ class RANManagement():
 		mySSH.command('echo ' + self.eNBPassword + ' | sudo -S rm enb*.log core* enb_*record.raw enb_*.pcap enb_*txt', '\$', 5)
 		mySSH.close()
 
-	def AnalyzeLogFile_eNB(self, eNBlogFile):
+	def AnalyzeLogFile_eNB(self, eNBlogFile, HTML):
 		if (not os.path.isfile('./' + eNBlogFile)):
 			return -1
 		enb_log_file = open('./' + eNBlogFile, 'r')
@@ -705,6 +690,15 @@ class RANManagement():
 		systemTime = ''
 		maxPhyMemUsage = ''
 		nbContextSwitches = ''
+		#NSA FR1 check
+		NSA_RAPROC_PUSCH_check = 0
+		#dlsch and ulsch statistics (dictionary)
+		dlsch_ulsch_stats = {}
+		#count "L1 thread not ready" msg 	
+		L1_thread_not_ready_cnt = 0
+		#count "problem receiving samples" msg
+		pb_receiving_samples_cnt = 0
+	
 		for line in enb_log_file.readlines():
 			# Runtime statistics
 			result = re.search('Run time:' ,str(line))
@@ -855,12 +849,36 @@ class RANManagement():
 				result = re.search('MBMS USER-PLANE.*Requesting.*bytes from RLC', str(line))
 				if result is not None:
 					mbmsRequestMsg += 1
+			#FR1 NSA test : add new markers to make sure gNB is used
+			result = re.search('\[gNB [0-9]+\]\[RAPROC\] PUSCH with TC_RNTI [0-9a-fA-F]+ received correctly, adding UE MAC Context UE_id [0-9]+\/RNTI [0-9a-fA-F]+', str(line))
+			if result is not None:
+				NSA_RAPROC_PUSCH_check = 1
+			#dlsch and ulsch statistics
+			#keys below are the markers we are loooking for, loop over this keys list
+			#everytime these markers are found in the log file, the previous ones are overwritten in the dict
+			#eventually we record and print only the last occurence 
+			keys = {'dlsch_rounds','dlsch_total_bytes','ulsch_rounds','ulsch_total_bytes_scheduled'}
+			for k in keys:
+				result = re.search(k, line)
+				if result is not None:
+					#remove 1- all useless char before relevant info (ulsch or dlsch) 2- trailing char
+					dlsch_ulsch_stats[k]=re.sub(r'^.*\]\s+', r'' , line.rstrip())
+			#count "L1 thread not ready" msg
+			result = re.search('\[PHY\]\s+L1_thread isn\'t ready', str(line))
+			if result is not None:
+				L1_thread_not_ready_cnt += 1	
+			#count "problem receiving samples" msg
+			result = re.search('\[PHY\]\s+problem receiving samples', str(line))
+			if result is not None:
+				pb_receiving_samples_cnt += 1				
+
 		enb_log_file.close()
 		logging.debug('   File analysis completed')
 		if (self.air_interface[self.eNB_instance] == 'lte-softmodem') or (self.air_interface[self.eNB_instance] == 'ocp-enb'):
 			nodeB_prefix = 'e'
 		else:
 			nodeB_prefix = 'g'
+
 		if self.air_interface[self.eNB_instance] == 'nr-softmodem':
 			if ulschReceiveOK > 0:
 				statMsg = nodeB_prefix + 'NB showed ' + str(ulschReceiveOK) + ' "ULSCH received ok" message(s)'
@@ -874,6 +892,34 @@ class RANManagement():
 				statMsg = nodeB_prefix + 'NB ran with TX Write thread enabled'
 				logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
 				htmleNBFailureMsg += statMsg + '\n'
+			#FR1 NSA test : add new markers to make sure gNB is used
+			if NSA_RAPROC_PUSCH_check:
+				statMsg = '[RAPROC] PUSCH with TC_RNTI message check for ' + nodeB_prefix + 'NB : PASS '
+				htmlMsg = statMsg+'\n'
+			else:
+				statMsg = '[RAPROC] PUSCH with TC_RNTI message check for ' + nodeB_prefix + 'NB : FAIL '
+				htmlMsg = statMsg+'\n'
+			logging.debug(statMsg)
+			htmleNBFailureMsg += htmlMsg
+			#L1 thread not ready log
+			statMsg = '[PHY] L1 thread is not ready msg count =  '+str(L1_thread_not_ready_cnt)
+			htmlMsg = statMsg+'\n'
+			logging.debug(statMsg)
+			htmleNBFailureMsg += htmlMsg
+			#problem receiving samples log
+			statMsg = '[PHY] problem receiving samples msg count =  '+str(pb_receiving_samples_cnt)
+			htmlMsg = statMsg+'\n'
+			logging.debug(statMsg)
+			htmleNBFailureMsg += htmlMsg
+
+			#ulsch and dlsch statistics
+			if len(dlsch_ulsch_stats)!=0: #check if dictionary is not empty
+				statMsg=''
+				for key in dlsch_ulsch_stats: #for each dictionary key
+					statMsg += dlsch_ulsch_stats[key] + '\n' 
+					logging.debug(dlsch_ulsch_stats[key])
+				htmleNBFailureMsg += statMsg
+
 		if uciStatMsgCount > 0:
 			statMsg = nodeB_prefix + 'NB showed ' + str(uciStatMsgCount) + ' "uci->stat" message(s)'
 			logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
@@ -981,8 +1027,7 @@ class RANManagement():
 			logging.debug('\u001B[1;37;41m ' + rlcMsg + ' \u001B[0m')
 			htmleNBFailureMsg += rlcMsg + '\n'
 			global_status = CONST.ENB_PROCESS_REALTIME_ISSUE
-		if self.htmlObj is not None:
-			self.htmlObj.htmleNBFailureMsg=htmleNBFailureMsg
+		HTML.htmleNBFailureMsg=htmleNBFailureMsg
 		# Runtime statistics for console output and HTML
 		if runTime != '':
 			logging.debug(runTime)

ci-scripts/reportBuildLocally.sh

@@ -568,28 +568,57 @@ function report_build {
 
     echo "   <h2>Ubuntu 16.04 LTS -- Summary</h2>" >> ./build_results.html
 
-    sca_summary_table_header ./archives/cppcheck/cppcheck.xml "OAI Static Code Analysis with CPPCHECK"
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized variable" uninitvar
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized struct member" uninitStructMember
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory leak" memleak
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory is freed twice" doubleFree
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Resource leak" resourceLeak
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Possible null pointer dereference" nullPointer
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Array access  out of bounds" arrayIndexOutOfBounds
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Buffer is accessed out of bounds" bufferAccessOutOfBounds
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Expression depends on order of evaluation of side effects" unknownEvaluationOrder
-    sca_summary_table_footer ./archives/cppcheck/cppcheck.xml
+    if [ -f ./archives/cppcheck/cppcheck.xml ]
+    then
+        sca_summary_table_header ./archives/cppcheck/cppcheck.xml "OAI Static Code Analysis with CPPCHECK"
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized variable" uninitvar
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized struct member" uninitStructMember
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory leak" memleak
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory is freed twice" doubleFree
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Resource leak" resourceLeak
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Possible null pointer dereference" nullPointer
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Array access  out of bounds" arrayIndexOutOfBounds
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Buffer is accessed out of bounds" bufferAccessOutOfBounds
+        sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Expression depends on order of evaluation of side effects" unknownEvaluationOrder
+        sca_summary_table_footer ./archives/cppcheck/cppcheck.xml
+    fi
 
-    summary_table_header "OAI Build: 4G LTE eNB -- USRP option" ./archives/enb_usrp
-    summary_table_row "LTE SoftModem - Release 15" ./archives/enb_usrp/lte-softmodem.Rel15.txt "Built target lte-softmodem" ./enb_usrp_row1.html
-    summary_table_row "Coding - Release 15" ./archives/enb_usrp/coding.Rel15.txt "Built target coding" ./enb_usrp_row2.html
-    summary_table_row "OAI USRP device if - Release 15" ./archives/enb_usrp/oai_usrpdevif.Rel15.txt "Built target oai_usrpdevif" ./enb_usrp_row3.html
-    summary_table_row "OAI ETHERNET transport - Release 15" ./archives/enb_usrp/oai_eth_transpro.Rel15.txt "Built target oai_eth_transpro" ./enb_usrp_row4.html
-    summary_table_row "Parameters Lib Config - Release 15" ./archives/enb_usrp/params_libconfig.Rel15.txt "Built target params_libconfig" ./enb_usrp_row5.html
-    summary_table_row "NASMESH - Release 15" ./archives/enb_usrp/nasmesh.Rel15.txt "Built target nasmesh" ./enb_usrp_row6.html
-    summary_table_row "RB Tool - Release 15" ./archives/enb_usrp/rb_tool.Rel15.txt "Built target rb_tool" ./enb_usrp_row7.html
-    summary_table_row "RF Simulator - Release 15" ./archives/enb_usrp/rfsimulator.Rel15.txt "Built target rfsimulator" ./enb_usrp_row8.html
-    summary_table_row "TCP Bridge - Release 15" ./archives/enb_usrp/tcp_bridge_oai.Rel15.txt "Built target tcp_bridge_oai" ./enb_usrp_row9.html
+#    summary_table_header "OAI Build: 4G LTE eNB -- USRP option" ./archives/enb_usrp
+#    summary_table_row "LTE SoftModem - Release 15" ./archives/enb_usrp/lte-softmodem.Rel15.txt "Built target lte-softmodem" ./enb_usrp_row1.html
+#    summary_table_row "Coding - Release 15" ./archives/enb_usrp/coding.Rel15.txt "Built target coding" ./enb_usrp_row2.html
+#    summary_table_row "OAI USRP device if - Release 15" ./archives/enb_usrp/oai_usrpdevif.Rel15.txt "Built target oai_usrpdevif" ./enb_usrp_row3.html
+#    summary_table_row "OAI ETHERNET transport - Release 15" ./archives/enb_usrp/oai_eth_transpro.Rel15.txt "Built target oai_eth_transpro" ./enb_usrp_row4.html
+#    summary_table_row "Parameters Lib Config - Release 15" ./archives/enb_usrp/params_libconfig.Rel15.txt "Built target params_libconfig" ./enb_usrp_row5.html
+#    summary_table_row "NASMESH - Release 15" ./archives/enb_usrp/nasmesh.Rel15.txt "Built target nasmesh" ./enb_usrp_row6.html
+#    summary_table_row "RB Tool - Release 15" ./archives/enb_usrp/rb_tool.Rel15.txt "Built target rb_tool" ./enb_usrp_row7.html
+#    summary_table_row "RF Simulator - Release 15" ./archives/enb_usrp/rfsimulator.Rel15.txt "Built target rfsimulator" ./enb_usrp_row8.html
+#    summary_table_row "TCP Bridge - Release 15" ./archives/enb_usrp/tcp_bridge_oai.Rel15.txt "Built target tcp_bridge_oai" ./enb_usrp_row9.html
+#    summary_table_footer
+#
+    summary_table_header "OAI Build: 4G LTE eNB -- USRP option" ./archives/enb_eth
+    summary_table_row "LTE SoftModem - Release 15" ./archives/enb_eth/lte-softmodem.Rel15.txt "Built target lte-softmodem" ./enb_eth_row1.html
+    summary_table_row "Coding - Release 15" ./archives/enb_eth/coding.Rel15.txt "Built target coding" ./enb_eth_row2.html
+    summary_table_row "OAI ETHERNET transport - Release 15" ./archives/enb_eth/oai_eth_transpro.Rel15.txt "Built target oai_eth_transpro" ./enb_eth_row3.html
+    summary_table_row "Parameters Lib Config - Release 15" ./archives/enb_eth/params_libconfig.Rel15.txt "Built target params_libconfig" ./enb_eth_row4.html
+    summary_table_row "RF Simulator - Release 15" ./archives/enb_eth/rfsimulator.Rel15.txt "Built target rfsimulator" ./enb_eth_row5.html
+    summary_table_row "TCP OAI Bridge - Release 15" ./archives/enb_eth/tcp_bridge_oai.Rel15.txt "Built target tcp_bridge_oai" ./enb_eth_row6.html
+    summary_table_row "OAI USRP device if - Release 15" ./archives/enb_eth/oai_usrpdevif.Rel15.txt "Built target oai_usrpdevif" ./enb_eth_row7.html
+    summary_table_row "NASMESH - Release 15" ./archives/enb_eth/nasmesh.Rel15.txt "Built target nasmesh" ./enb_eth_row8.html
+    summary_table_row "RB Tool - Release 15" ./archives/enb_eth/rb_tool.Rel15.txt "Built target rb_tool" ./enb_eth_row9.html
+    summary_table_footer
+
+    summary_table_header "OAI Build: 4G LTE UE -- USRP option" ./archives/ue_eth
+    summary_table_row "LTE UE SoftModem - Release 15" ./archives/ue_eth/lte-uesoftmodem.Rel15.txt "Built target lte-uesoftmodem" ./ue_eth_row1.html
+    summary_table_row "Coding - Release 15" ./archives/ue_eth/coding.Rel15.txt "Built target coding" ./ue_eth_row2.html
+    summary_table_row "OAI ETHERNET transport - Release 15" ./archives/ue_eth/oai_eth_transpro.Rel15.txt "Built target oai_eth_transpro" ./ue_eth_row3.html
+    summary_table_row "Parameters Lib Config - Release 15" ./archives/ue_eth/params_libconfig.Rel15.txt "Built target params_libconfig" ./ue_eth_row4.html
+    summary_table_row "RF Simulator - Release 15" ./archives/ue_eth/rfsimulator.Rel15.txt "Built target rfsimulator" ./ue_eth_row5.html
+    summary_table_row "TCP OAI Bridge - Release 15" ./archives/ue_eth/tcp_bridge_oai.Rel15.txt "Built target tcp_bridge_oai" ./ue_eth_row6.html
+    summary_table_row "Conf 2 UE Data - Release 15" ./archives/ue_eth/conf2uedata.Rel15.txt "Built target conf2uedata" ./ue_eth_row7.html
+    summary_table_row "NVRAM - Release 15" ./archives/ue_eth/nvram.Rel15.txt "Built target nvram" ./ue_eth_row8.html
+    summary_table_row "UE IP - Release 15" ./archives/ue_eth/ue_ip.Rel15.txt "Built target ue_ip" ./ue_eth_row9.html
+    summary_table_row "USIM - Release 15" ./archives/ue_eth/usim.Rel15.txt "Built target usim" ./ue_eth_row9a.html
+    summary_table_row "OAI USRP device if - Release 15" ./archives/ue_eth/oai_usrpdevif.Rel15.txt "Built target oai_usrpdevif" ./ue_eth_row9b.html
     summary_table_footer
 
     summary_table_header "OAI Build: 4G LTE basic simulator option" ./archives/basic_sim
@@ -676,28 +705,6 @@ function report_build {
         summary_table_footer
     fi
 
-    summary_table_header "OAI Build: 4G LTE eNB -- ETHERNET transport option" ./archives/enb_eth
-    summary_table_row "LTE SoftModem - Release 15" ./archives/enb_eth/lte-softmodem.Rel15.txt "Built target lte-softmodem" ./enb_eth_row1.html
-    summary_table_row "Coding - Release 15" ./archives/enb_eth/coding.Rel15.txt "Built target coding" ./enb_eth_row2.html
-    summary_table_row "OAI ETHERNET transport - Release 15" ./archives/enb_eth/oai_eth_transpro.Rel15.txt "Built target oai_eth_transpro" ./enb_eth_row3.html
-    summary_table_row "Parameters Lib Config - Release 15" ./archives/enb_eth/params_libconfig.Rel15.txt "Built target params_libconfig" ./enb_eth_row4.html
-    summary_table_row "RF Simulator - Release 15" ./archives/enb_eth/rfsimulator.Rel15.txt "Built target rfsimulator" ./enb_eth_row5.html
-    summary_table_row "TCP OAI Bridge - Release 15" ./archives/enb_eth/tcp_bridge_oai.Rel15.txt "Built target tcp_bridge_oai" ./enb_eth_row6.html
-    summary_table_footer
-
-    summary_table_header "OAI Build: 4G LTE UE -- ETHERNET transport option" ./archives/ue_eth
-    summary_table_row "LTE UE SoftModem - Release 15" ./archives/ue_eth/lte-uesoftmodem.Rel15.txt "Built target lte-uesoftmodem" ./ue_eth_row1.html
-    summary_table_row "Coding - Release 15" ./archives/ue_eth/coding.Rel15.txt "Built target coding" ./ue_eth_row2.html
-    summary_table_row "OAI ETHERNET transport - Release 15" ./archives/ue_eth/oai_eth_transpro.Rel15.txt "Built target oai_eth_transpro" ./ue_eth_row3.html
-    summary_table_row "Parameters Lib Config - Release 15" ./archives/ue_eth/params_libconfig.Rel15.txt "Built target params_libconfig" ./ue_eth_row4.html
-    summary_table_row "RF Simulator - Release 15" ./archives/ue_eth/rfsimulator.Rel15.txt "Built target rfsimulator" ./ue_eth_row5.html
-    summary_table_row "TCP OAI Bridge - Release 15" ./archives/ue_eth/tcp_bridge_oai.Rel15.txt "Built target tcp_bridge_oai" ./ue_eth_row6.html
-    summary_table_row "Conf 2 UE Data - Release 15" ./archives/ue_eth/conf2uedata.Rel15.txt "Built target conf2uedata" ./ue_eth_row7.html
-    summary_table_row "NVRAM - Release 15" ./archives/ue_eth/nvram.Rel15.txt "Built target nvram" ./ue_eth_row8.html
-    summary_table_row "UE IP - Release 15" ./archives/ue_eth/ue_ip.Rel15.txt "Built target ue_ip" ./ue_eth_row9.html
-    summary_table_row "USIM - Release 15" ./archives/ue_eth/usim.Rel15.txt "Built target usim" ./ue_eth_row9a.html
-    summary_table_footer
-
     if [ -e ./archives/red_hat ]
     then
         echo "   <h2>Red Hat Enterprise Linux Server release 7.6) -- Summary</h2>" >> ./build_results.html
@@ -714,9 +721,23 @@ function report_build {
     echo "   <button data-toggle=\"collapse\" data-target=\"#oai-compilation-details\">Details for Compilation Errors and Warnings </button>" >> ./build_results.html
     echo "   <div id=\"oai-compilation-details\" class=\"collapse\">" >> ./build_results.html
 
-    if [ -f ./enb_usrp_row1.html ] || [ -f ./enb_usrp_row2.html ] || [ -f ./enb_usrp_row3.html ] || [ -f ./enb_usrp_row4.html ]
+#    if [ -f ./enb_usrp_row1.html ] || [ -f ./enb_usrp_row2.html ] || [ -f ./enb_usrp_row3.html ] || [ -f ./enb_usrp_row4.html ]
+#    then
+#        for DETAILS_TABLE in `ls ./enb_usrp_row*.html`
+#        do
+#            cat $DETAILS_TABLE >> ./build_results.html
+#        done
+#    fi
+    if [ -f ./enb_eth_row1.html ] || [ -f ./enb_eth_row2.html ] || [ -f ./enb_eth_row3.html ] || [ -f ./enb_eth_row4.html ] || [ -f ./enb_eth_row5.html ] || [ -f ./enb_eth_row6.html ] || [ -f ./enb_eth_row7.html ] || [ -f ./enb_eth_row8.html ] || [ -f ./enb_eth_row9.html ]
     then
-        for DETAILS_TABLE in `ls ./enb_usrp_row*.html`
+        for DETAILS_TABLE in `ls ./enb_eth_row*.html`
+        do
+            cat $DETAILS_TABLE >> ./build_results.html
+        done
+    fi
+    if [ -f ./ue_eth_row1.html ] || [ -f ./ue_eth_row2.html ] || [ -f ./ue_eth_row3.html ] || [ -f ./ue_eth_row4.html ] || [ -f ./ue_eth_row5.html ] || [ -f ./ue_eth_row6.html ] || [ -f ./ue_eth_row7.html ] || [ -f ./ue_eth_row8.html ] || [ -f ./ue_eth_row9.html ] || [ -f ./ue_eth_row9a.html ] || [ -f ./ue_eth_row9b.html ]
+    then
+        for DETAILS_TABLE in `ls ./ue_eth_row*.html`
         do
             cat $DETAILS_TABLE >> ./build_results.html
         done
@@ -749,20 +770,6 @@ function report_build {
             cat $DETAILS_TABLE >> ./build_results.html
         done
     fi
-    if [ -f ./enb_eth_row1.html ] || [ -f ./enb_eth_row2.html ] || [ -f ./enb_eth_row3.html ] || [ -f ./enb_eth_row4.html ] || [ -f ./enb_eth_row5.html ] || [ -f ./enb_eth_row6.html ]
-    then
-        for DETAILS_TABLE in `ls ./enb_eth_row*.html`
-        do
-            cat $DETAILS_TABLE >> ./build_results.html
-        done
-    fi
-    if [ -f ./ue_eth_row1.html ] || [ -f ./ue_eth_row2.html ] || [ -f ./ue_eth_row3.html ] || [ -f ./ue_eth_row4.html ] || [ -f ./ue_eth_row5.html ] || [ -f ./ue_eth_row6.html ]
-    then
-        for DETAILS_TABLE in `ls ./ue_eth_row*.html`
-        do
-            cat $DETAILS_TABLE >> ./build_results.html
-        done
-    fi
     if [ -f ./enb_usrp_rh_row1.html ] || [ -f ./enb_usrp_rh_row2.html ] || [ -f ./enb_usrp_rh_row3.html ] || [ -f ./enb_usrp_rh_row4.html ]
     then
         for DETAILS_TABLE in `ls ./enb_usrp_rh_row*.html`

ci-scripts/reportTestLocally.sh

@@ -470,7 +470,7 @@ function report_test {
                     then
                         NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG`
                     else
-                        NB_UE_TUNNEL_UP=`egrep -c "executing ifconfig oaitun_ue1" $UE_LOG`
+                        NB_UE_TUNNEL_UP=`egrep -c "ip link set oaitun_ue1 up" $UE_LOG`
                     fi
                     if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
                     then
@@ -750,6 +750,77 @@ function report_test {
 
         EPC_CONFIGS=("noS1")
         TRANS_MODES=("tdd")
+        FR_MODE=("FR2")
+        BW_CASES=(32)
+        for CN_CONFIG in ${EPC_CONFIGS[@]}
+        do
+          for TMODE in ${TRANS_MODES[@]}
+          do
+            for BW in ${BW_CASES[@]}
+            do
+                echo "      <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
+                if [[ $CN_CONFIG =~ .*wS1.* ]]
+                then
+                    echo "          <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
+                else
+                    echo "          <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
+                fi
+                echo "      </tr>" >> ./test_simulator_results.html
+
+
+                #FR2 RA test (--do-ra option)
+
+                #build log files names tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
+
+                RA_ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
+                RA_UE_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_ue_ra_fr2_test.log
+                if [ -f $RA_ENB_LOG ] && [ -f $RA_UE_LOG ]
+                then
+                    #get rid of full path
+                    NAME_ENB=`echo $RA_ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                    NAME_UE=`echo $RA_UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                    echo "      <tr>" >> ./test_simulator_results.html
+                    echo "        <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
+                    echo "        <td>Check if FR2 RA proc succeeded</td>" >> ./test_simulator_results.html
+
+                    #gNB RA check
+                    GNB_RECEIVED=`egrep -c "\[RAPROC\] PUSCH with TC_RNTI (.+) received correctly" $RA_ENB_LOG`
+                    #UE RA check
+                    UE_RA_PROC_OK=`egrep -c "\[RAPROC\] RA procedure succeeded" $RA_UE_LOG`
+
+
+                    if [ $GNB_RECEIVED -gt 0 ] && [ $UE_RA_PROC_OK -gt 0 ]
+                    then
+                        echo "        <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
+                    else
+                        echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                    fi
+
+                    echo "        <td><pre>" >> ./test_simulator_results.html
+                    if [ $GNB_RECEIVED -gt 0 ]
+                    then
+                        echo "<font color = \"blue\">- gNB --> RA received</font>" >> ./test_simulator_results.html
+                    else
+                        echo "<font color = \"red\"><b>- gNB RA NOT RECEIVED</b></font>" >> ./test_simulator_results.html
+                    fi
+                    if [ $UE_RA_PROC_OK -gt 0 ]
+                    then
+                        echo "<font color = \"blue\">- NR UE  --> RA procedure succeded</font>" >> ./test_simulator_results.html
+                    else
+                        echo "<font color = \"red\"><b>- NR UE RA procedure failed</b></font>" >> ./test_simulator_results.html
+                    fi
+                    echo "        </pre></td>" >> ./test_simulator_results.html
+                    echo "      </tr>" >> ./test_simulator_results.html
+                fi
+
+            done
+          done
+        done
+    
+
+        EPC_CONFIGS=("noS1")
+        FR_MODE=("FR1")
+        TRANS_MODES=("fdd" "tdd")
         BW_CASES=(106)
         for CN_CONFIG in ${EPC_CONFIGS[@]}
         do
@@ -760,11 +831,58 @@ function report_test {
                 echo "      <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
                 if [[ $CN_CONFIG =~ .*wS1.* ]]
                 then
-                    echo "          <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB </td>" >> ./test_simulator_results.html
+                    echo "          <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
                 else
-                    echo "          <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB </td>" >> ./test_simulator_results.html
+                    echo "          <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
                 fi
                 echo "      </tr>" >> ./test_simulator_results.html
+
+
+                #FR1 RA test (--do-ra option)
+
+                #build log files names
+                RA_ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb_ra_test.log
+                RA_UE_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_ue_ra_test.log
+                if [ -f $RA_ENB_LOG ] && [ -f $RA_UE_LOG ]
+                then
+                    #get rid of full path
+                    NAME_ENB=`echo $RA_ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                    NAME_UE=`echo $RA_UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                    echo "      <tr>" >> ./test_simulator_results.html
+                    echo "        <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
+                    echo "        <td>Check if FR1 RA proc succeeded</td>" >> ./test_simulator_results.html
+
+                    #gNB RA check
+                    GNB_RECEIVED=`egrep -c "\[RAPROC\] PUSCH with TC_RNTI (.+) received correctly" $RA_ENB_LOG`
+                    #UE RA check
+                    UE_RA_PROC_OK=`egrep -c "\[RAPROC\] RA procedure succeeded" $RA_UE_LOG`
+
+
+                    if [ $GNB_RECEIVED -gt 0 ] && [ $UE_RA_PROC_OK -gt 0 ]
+                    then
+                        echo "        <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
+                    else
+                        echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                    fi
+
+                    echo "        <td><pre>" >> ./test_simulator_results.html
+                    if [ $GNB_RECEIVED -gt 0 ]
+                    then
+                        echo "<font color = \"blue\">- gNB --> RA received</font>" >> ./test_simulator_results.html
+                    else
+                        echo "<font color = \"red\"><b>- gNB RA NOT RECEIVED</b></font>" >> ./test_simulator_results.html
+                    fi
+                    if [ $UE_RA_PROC_OK -gt 0 ]
+                    then
+                        echo "<font color = \"blue\">- NR UE  --> RA procedure succeded</font>" >> ./test_simulator_results.html
+                    else
+                        echo "<font color = \"red\"><b>- NR UE RA procedure failed</b></font>" >> ./test_simulator_results.html
+                    fi
+                    echo "        </pre></td>" >> ./test_simulator_results.html
+                    echo "      </tr>" >> ./test_simulator_results.html
+                fi
+
+                #SYNC test
                 ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb.log
                 UE_LOG=`echo $ENB_LOG | sed -e "s#gnb#ue#"`
                 if [ -f $ENB_LOG ] && [ -f $UE_LOG ]

ci-scripts/runTestOnVM.sh

@@ -276,6 +276,43 @@ function check_ping_result {
     fi
 }
 
+
+function check_ra_result {
+    local LOC_GNB_LOG=$1
+    local LOC_UE_LOG=$2
+
+    #if log files exist
+    if [ -f $LOC_GNB_LOG ] && [ -f $LOC_UE_LOG ]
+    then
+
+        #gNB RA test
+        #console check
+        echo "Checking gNB Log for RA success"
+        egrep "\[RAPROC\] PUSCH with TC_RNTI (.+) received correctly" $1
+        #script check
+        local GNB_COMPLETE=`egrep -c "\[RAPROC\] PUSCH with TC_RNTI (.+) received correctly" $1`
+
+        #UE RA test
+        #console check
+        echo 'Checking UE Log for RA success'
+        egrep "\[RAPROC\] RA procedure succeeded" $2
+        #script check
+        local UE_COMPLETE=`egrep -c "\[RAPROC\] RA procedure succeeded" $2`
+
+        #generate status
+        if [ $GNB_COMPLETE -eq 0 ] || [ $UE_COMPLETE -eq 0 ]
+        then
+            RA_STATUS=-1
+            echo "RA test FAILED, could not find the markers"
+        fi
+    #case where log files do not exist
+    else
+        echo "RA test log files not present"
+        RA_STATUS=-1        
+    fi
+
+}
+
 # In DL: iperf server should be on UE side
 #                     -B oaitun_ue{j}-IP-Addr
 #        iperf client should be on EPC (S1) or eNB (noS1) side
@@ -342,7 +379,7 @@ function check_iperf {
     local LOC_IS_DL=`echo $LOC_BASE_LOG | grep -c _dl`
     local LOC_IS_BASIC_SIM=`echo $LOC_BASE_LOG | grep -c basic_sim`
     local LOC_IS_RF_SIM=`echo $LOC_BASE_LOG | grep -c rf_sim`
-    local LOC_IS_NR=`echo $LOC_BASE_LOG | grep -c tdd_106prb`
+    local LOC_IS_NR=`echo $LOC_BASE_LOG | grep -c _106prb`
     if [ -f ${LOC_BASE_LOG}_client.txt ]
     then
         local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt`
@@ -1172,6 +1209,8 @@ function start_rf_sim_gnb {
     local LOC_CONF_FILE=$5
     # 1 is with S1 and 0 without S1 aka noS1
     local LOC_S1_CONFIGURATION=$6
+    #LOC_RA_TEST=1 will run the RA test check
+    local LOC_RA_TEST=$7
 
     if [ -e rbconfig.raw ]; then rm -f rbconfig.raw; fi
     if [ -e reconfig.raw ]; then rm -f reconfig.raw; fi
@@ -1181,6 +1220,8 @@ function start_rf_sim_gnb {
     echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
     echo "echo \"source oaienv\"" >> $1
     echo "source oaienv" >> $1
+    echo "echo \"export RFSIMULATOR=server\"" >> $1
+    echo "export RFSIMULATOR=server" >> $1
     echo "cd ci-scripts/conf_files/" >> $1
     echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
     #echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL                                         = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_ENB_VM_IP_ADDR#' -e 's#CI_UE_IP_ADDR#$LOC_UE_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
@@ -1192,7 +1233,12 @@ function start_rf_sim_gnb {
     echo "sudo rm -f r*config.raw" >> $1
     if [ $LOC_S1_CONFIGURATION -eq 0 ]
     then
-        echo "echo \"RFSIMULATOR=server ./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --noS1 --nokrnmod 1 --rfsim --phy-test\" > ./my-nr-softmodem-run.sh " >> $1
+        if [ $LOC_RA_TEST -eq 0 ] #no RA test => use --phy-test option
+        then
+            echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --noS1 --nokrnmod 1 --rfsim --phy-test\" > ./my-nr-softmodem-run.sh " >> $1
+        else #RA test => use --do-ra option
+            echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --rfsim --do-ra\" > ./my-nr-softmodem-run.sh " >> $1
+        fi
     fi
     echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
     echo "cat ./my-nr-softmodem-run.sh" >> $1
@@ -1202,6 +1248,7 @@ function start_rf_sim_gnb {
     ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_GNB_VM_IP_ADDR < $1
     rm $1
 
+
     local i="0"
     echo "egrep -c \"got sync\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
     while [ $i -lt 10 ]
@@ -1224,7 +1271,9 @@ function start_rf_sim_gnb {
         GNB_SYNC=1
         echo "RF-SIM gNB is sync'ed: waiting for UE(s) to connect"
     fi
-    if [ $LOC_S1_CONFIGURATION -eq 0 ]
+
+    # check noS1 config only outside RA test (as it does not support noS1)
+    if [ $LOC_S1_CONFIGURATION -eq 0 ] && [ $LOC_RA_TEST -eq 0 ]
     then
         echo "ifconfig oaitun_enb1 | egrep -c \"inet addr\"" > $1
         # Checking oaitun_enb1 interface has now an IP address
@@ -1249,6 +1298,8 @@ function start_rf_sim_gnb {
             echo "RF-SIM gNB oaitun_enb1 is UP and CONFIGURED"
         fi
     fi
+
+
     sleep 10
     echo "echo \"free -m\"" > $1
     echo "free -m" >> $1
@@ -1267,6 +1318,8 @@ function start_rf_sim_nr_ue {
     local LOC_FREQUENCY=$6
     # 1 is with S1 and 0 without S1 aka noS1
     local LOC_S1_CONFIGURATION=$7
+    #LOC_RA_TEST=1 will run the RA test check
+    local LOC_RA_TEST=$8
 
     # Copy the RAW files from the gNB run
     scp -o StrictHostKeyChecking=no rbconfig.raw ubuntu@$LOC_NR_UE_VM_IP_ADDR:/home/ubuntu/tmp
@@ -1274,6 +1327,8 @@ function start_rf_sim_nr_ue {
 
     echo "echo \"sudo apt-get --yes --quiet install daemon \"" > $1
     echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
+    echo "echo \"export RFSIMULATOR=${LOC_GNB_VM_IP_ADDR}\"" >> $1
+    echo "export RFSIMULATOR=${LOC_GNB_VM_IP_ADDR}" >> $1
     echo "echo \"cd /home/ubuntu/tmp/cmake_targets/ran_build/build/\"" >> $1
     echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
     echo "sudo cp /home/ubuntu/tmp/r*config.raw /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
@@ -1281,7 +1336,12 @@ function start_rf_sim_nr_ue {
     echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
     if [ $LOC_S1_CONFIGURATION -eq 0 ]
     then
-        echo "echo \"RFSIMULATOR=${LOC_GNB_VM_IP_ADDR}  ./nr-uesoftmodem --nokrnmod 1 --rfsim --phy-test --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/ --log_config.global_log_options level,nocolor --noS1\" > ./my-nr-softmodem-run.sh " >> $1
+        if [ $LOC_RA_TEST -eq 0 ] #no RA test => use --phy-test option
+        then
+            echo "echo \"./nr-uesoftmodem --nokrnmod 1 --rfsim --phy-test --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/ --log_config.global_log_options level,nocolor --noS1\" > ./my-nr-softmodem-run.sh " >> $1
+        else #RA test => use --do-ra option
+            echo "echo \"./nr-uesoftmodem --rfsim --do-ra --log_config.global_log_options level,nocolor --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/\" > ./my-nr-softmodem-run.sh " >> $1
+        fi
     fi
     echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
     echo "cat ./my-nr-softmodem-run.sh" >> $1
@@ -1314,11 +1374,13 @@ function start_rf_sim_nr_ue {
     else
         echo "RF-SIM NR-UE is sync'ed w/ gNB"
     fi
-    # Checking oaitun_ue1 interface has now an IP address
-    i="0"
-    echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
-    while [ $i -lt 10 ]
-    do
+    # Checking oaitun_ue1 interface has now an IP address (only outside RA test)
+    if [ $LOC_RA_TEST -eq  0 ]
+    then
+      i="0"
+      echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
+      while [ $i -lt 10 ]
+      do
         sleep 5
         CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_NR_UE_VM_IP_ADDR < $1`
         if [ $CONNECTED -eq 1 ]
@@ -1327,19 +1389,20 @@ function start_rf_sim_nr_ue {
         else
             i=$[$i+1]
         fi
-    done
-    echo "echo \"free -m\"" > $1
-    echo "free -m" >> $1
-    ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_NR_UE_VM_IP_ADDR < $1
-    rm $1
-    if [ $i -lt 50 ]
-    then
+      done
+      echo "echo \"free -m\"" > $1
+      echo "free -m" >> $1
+      ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_NR_UE_VM_IP_ADDR < $1
+      rm $1
+      if [ $i -lt 50 ]
+      then
         NR_UE_SYNC=0
         echo "RF-SIM NR-UE oaitun_ue1 is DOWN or NOT CONFIGURED"
-    else
+      else
         echo "RF-SIM NR-UE oaitun_ue1 is UP and CONFIGURED"
-    fi
-    sleep 10
+      fi
+      sleep 10
+   fi
 }
 
 
@@ -2027,30 +2090,6 @@ function run_test_on_vm {
 
         done
 
-        full_l2_sim_destroy
-
-        echo "############################################################"
-        echo "Checking run status"
-        echo "############################################################"
-
-        if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
-        if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
-        if [ $MBMS_STATUS -eq 0 ]
-        then
-            echo "LTE MBMS RFSIM seems OK"
-        else
-            echo "LTE MBMS RFSIM seems to FAIL"
-            STATUS=-1
-        fi
-        if [ $STATUS -eq 0 ]
-        then
-            echo "LTE RFSIM seems OK"
-            echo "LTE: TEST_OK" > $ARCHIVES_LOC/test_final_status.log
-        else
-            echo "LTE RFSIM seems to FAIL"
-            echo "LTE: TEST_KO" > $ARCHIVES_LOC/test_final_status.log
-        fi
-
         ####################
         ## FeMBMS CASE noS1 ##
         ####################
@@ -2123,6 +2162,13 @@ function run_test_on_vm {
 
         if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
         if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
+        if [ $MBMS_STATUS -eq 0 ]
+        then
+            echo "LTE MBMS RFSIM seems OK"
+        else
+            echo "LTE MBMS RFSIM seems to FAIL"
+            STATUS=-1
+        fi
         if [ $FeMBMS_STATUS -eq 0 ]
         then
             echo "LTE FeMBMS RFSIM seems OK"
@@ -2143,33 +2189,45 @@ function run_test_on_vm {
 
     if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
     then
+        echo "############################################################"
+        echo "RA TEST FR2"
+        echo "############################################################"
+        #RA FR2 test, attention : has a different config file from the rest of the test
         CN_CONFIG="noS1"
-        CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
+        CONF_FILE=gnb.band261.tm1.32PRB.usrpn300.conf
         S1_NOS1_CFG=0
-        PRB=106
-        FREQUENCY=3510
+        PRB=32
+        FREQUENCY=28000 #28GHz
 
-        local try_cnt="0"
+        if [ ! -d $ARCHIVES_LOC ]
+        then
+            mkdir --parents $ARCHIVES_LOC
+        fi
+
+        local try_cnt=0
         NR_STATUS=0
 
-        ######### start of loop
-        while [ $try_cnt -lt 1 ]
+        ######### start of RA TEST loop
+        while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
         do
+
             SYNC_STATUS=0
-            PING_STATUS=0
-            IPERF_STATUS=0
+            RA_FR2_STATUS=0
+            rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*ra_fr2_test.log
 
             echo "############################################################"
             echo "${CN_CONFIG} : Starting the gNB"
             echo "############################################################"
-            CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb.log
-            start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
+            CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
+            #last argument = 1 is to enable --do-ra for RA test
+            start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 1
 
             echo "############################################################"
             echo "${CN_CONFIG} : Starting the NR-UE"
             echo "############################################################"
-            CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue.log
-            start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
+            CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_ra_fr2_test.log
+            #last argument = 1 is to enable --do-ra for RA test
+            start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
             if [ $NR_UE_SYNC -eq 0 ]
             then
                 echo "Problem w/ gNB and NR-UE not syncing"
@@ -2178,7 +2236,184 @@ function run_test_on_vm {
                 scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
                 scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
                 SYNC_STATUS=-1
-                try_cnt=$[$try_cnt+1]
+                try_cnt=$((try_cnt+1))
+                continue
+            fi
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
+            echo "############################################################"
+            sleep 20
+            terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
+            terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
+            scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
+            scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
+
+            #check RA markers in gNB and NR UE log files
+            echo "############################################################"
+            echo "${CN_CONFIG} : Checking FR2 RA on gNB / NR-UE"
+            echo "############################################################"
+
+            # Proper check to be done when RA test is working!
+            check_ra_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
+            if [ $RA_FR2_STATUS -ne 0 ]
+            then
+                echo "RA FR2 test NOT OK"
+                echo "try_cnt = " $try_cnt
+                try_cnt=$((try_cnt+1))
+            else
+                try_cnt=$((try_cnt+10))
+            fi
+        done
+        ########### end RA FR2 test
+
+        sleep 30
+
+
+        echo "############################################################"
+        echo "RA TEST FR1"
+        echo "############################################################"
+        ######### redefine config for the rest of the test
+
+        CN_CONFIG="noS1"
+        CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
+        S1_NOS1_CFG=0
+        PRB=106
+        FREQUENCY=3510
+
+        if [ ! -d $ARCHIVES_LOC ]
+        then
+            mkdir --parents $ARCHIVES_LOC
+        fi
+
+        CN_CONFIG="noS1"
+        S1_NOS1_CFG=0
+
+        ######### start of RA TEST loop
+        # for the moment only TDD
+        TRANS_MODES=("tdd")
+        for TMODE in ${TRANS_MODES[@]}
+        do
+          if [[ $TMODE =~ .*fdd.* ]]
+          then
+            CONF_FILE=gnb.band66.tm1.106PRB.usrpn300.conf
+            PRB=106
+            FREQUENCY=37000
+          else
+            CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
+            PRB=106
+            FREQUENCY=3510
+          fi
+
+          local try_cnt=0
+          NR_STATUS=0
+          while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
+
+          do
+            SYNC_STATUS=0
+            RA_STATUS=0
+            rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}*ra_test.log
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the gNB in ${TMODE} mode (RA TEST)"
+            echo "############################################################"
+            CURRENT_GNB_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_gnb_ra_test.log
+            #last argument = 1 is to enable --do-ra for RA test
+            start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 1
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the NR-UE in ${TMODE} mode (RA TEST)"
+            echo "############################################################"
+            CURRENT_NR_UE_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ue_ra_test.log
+            #last argument = 1 is to enable --do-ra for RA test
+            start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
+            if [ $NR_UE_SYNC -eq 0 ]
+            then
+                echo "Problem w/ gNB and NR-UE not syncing"
+                terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
+                terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
+                scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
+                scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
+                SYNC_STATUS=-1
+                try_cnt=$((try_cnt+1))
+                continue
+            fi
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
+            echo "############################################################"
+            sleep 20
+            terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
+            terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
+            scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
+            scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
+
+            #check RA markers in gNB and NR UE log files
+            echo "############################################################"
+            echo "${CN_CONFIG} : Checking FR1 RA on gNB / NR-UE"
+            echo "############################################################"
+
+            # Proper check to be done when RA test is working!
+            check_ra_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
+            if [ $RA_STATUS -ne 0 ]
+            then
+                echo "RA FR1 test NOT OK"
+                echo "try_cnt = " $try_cnt
+                try_cnt=$((try_cnt+1))
+            else
+                try_cnt=$((try_cnt+10))
+            fi
+          done
+        done
+        ########### end RA test
+        
+        sleep 30
+
+        ######### start of PHY TEST loop
+        SYNC_STATUS=0
+        PING_STATUS=0
+        IPERF_STATUS=0
+        TRANS_MODES=("fdd tdd")
+        for TMODE in ${TRANS_MODES[@]}
+        do
+          if [[ $TMODE =~ .*fdd.* ]]
+          then
+            CONF_FILE=gnb.band66.tm1.106PRB.usrpn300.conf
+            PRB=106
+            FREQUENCY=37000
+          else
+            CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
+            PRB=106
+            FREQUENCY=3510
+          fi
+
+          try_cnt=0
+          while [ $try_cnt -lt 4 ]
+          do
+            rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_gnb.log $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_ue.log
+            rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
+            rm -f $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_dl*txt $ARCHIVES_LOC/${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_ul*txt
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the gNB in ${TMODE} mode (PHY TEST)"
+            echo "############################################################"
+            CURRENT_GNB_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_gnb.log
+            start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 0
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the NR-UE in ${TMODE} mode (PHY TEST)"
+            echo "############################################################"
+            CURRENT_NR_UE_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ue.log
+            start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 0
+            if [ $NR_UE_SYNC -eq 0 ]
+            then
+                echo "Problem w/ gNB and NR-UE not syncing"
+                terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
+                terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
+                scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
+                scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
+                SYNC_STATUS=-1
+                try_cnt=$((try_cnt+1))
                 continue
             fi
 
@@ -2186,7 +2421,7 @@ function run_test_on_vm {
             echo "${CN_CONFIG} : Pinging the gNB from NR-UE"
             echo "############################################################"
             get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
-            PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log
+            PING_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ping_gnb_from_nrue.log
             ping_epc_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE 1 0
             scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
             check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
@@ -2195,7 +2430,7 @@ function run_test_on_vm {
             echo "${CN_CONFIG} : Pinging the NR-UE from gNB"
             echo "############################################################"
             get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
-            PING_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
+            PING_LOG_FILE=${TMODE}_${PRB}prb_${CN_CONFIG}_ping_from_gnb_nrue.log
             ping_enb_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE 0
             scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
             check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
@@ -2204,7 +2439,7 @@ function run_test_on_vm {
             echo "${CN_CONFIG} : iperf DL -- NR-UE is server and gNB is client"
             echo "############################################################"
             THROUGHPUT="30K"
-            CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_dl
+            CURR_IPERF_LOG_BASE=${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_dl
             get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
             get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
             generic_iperf $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0 
@@ -2218,7 +2453,7 @@ function run_test_on_vm {
                 terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
                 scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
                 scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
-                try_cnt=$[$try_cnt+1]
+                try_cnt=$((try_cnt+1))
                 continue
             fi
 
@@ -2226,7 +2461,7 @@ function run_test_on_vm {
             echo "${CN_CONFIG} : iperf UL -- gNB is server and NR-UE is client"
             echo "############################################################"
             THROUGHPUT="30K"
-            CURR_IPERF_LOG_BASE=tdd_${PRB}prb_${CN_CONFIG}_iperf_ul
+            CURR_IPERF_LOG_BASE=${TMODE}_${PRB}prb_${CN_CONFIG}_iperf_ul
             get_enb_noS1_ip_addr $GNB_VM_CMDS $GNB_VM_IP_ADDR
             get_ue_ip_addr $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 1
             generic_iperf $GNB_VM_CMDS $GNB_VM_IP_ADDR $ENB_IP_ADDR $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE 1 0
@@ -2244,10 +2479,11 @@ function run_test_on_vm {
             if [ $IPERF_STATUS -ne 0 ]
             then
                 echo "UL test not OK"
-                try_cnt=$[$try_cnt+1]
+                try_cnt=$((try_cnt+1))
             else
-                try_cnt=$[$try_cnt+10]
+                try_cnt=$((try_cnt+10))
             fi
+          done
         done
         ######### end of loop
         full_l2_sim_destroy
@@ -2257,6 +2493,8 @@ function run_test_on_vm {
         echo "Checking run status"
         echo "############################################################"
 
+        if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi        
+        if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
         if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi
         if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi
         if [ $IPERF_STATUS -ne 0 ]; then NR_STATUS=-1; fi

ci-scripts/sshconnection.py

@@ -52,13 +52,11 @@ class SSHConnection():
 		self.picocom_closure = True
 
 	def open(self, ipaddress, username, password):
-		extraSshOptions = ''
 		count = 0
 		connect_status = False
-		if ipaddress == '192.168.18.197':
-			extraSshOptions = ' -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no'
 		while count < 4:
-			self.ssh = pexpect.spawn('ssh', [username + '@' + ipaddress + extraSshOptions], timeout = 5)
+			self.ssh = pexpect.spawn('ssh -o PubkeyAuthentication=no {}@{}'.format(username,ipaddress))
+			self.ssh.timeout = 5
 			self.sshresponse = self.ssh.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', 'Last login', pexpect.EOF, pexpect.TIMEOUT])
 			if self.sshresponse == 0:
 				self.ssh.sendline('yes')

ci-scripts/tcp_iperf_stats.awk

@@ -21,7 +21,11 @@
 BEGIN{max=0;min=10000}
 {
     if ($0 ~/Mbits/) {
-        split($0,a,"MBytes")
+        if ($0 ~/KBytes/) {
+            split($0,a,"KBytes")
+        } else {
+            split($0,a,"MBytes")
+        }
         split(a[2],b)
         if (b[1]>max) {
             max=b[1]

ci-scripts/waitBuildOnVM.sh

@@ -47,6 +47,12 @@ function wait_on_vm_build {
     echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
     echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
 
+    if [[ "$VM_NAME" == *"-enb-usrp"* ]] || [[ "$VM_NAME" == *"-cppcheck"* ]]
+    then
+        echo "This VM type is no longer supported in the pipeline framework"
+        return
+    fi
+
     IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
 
     if [ $IS_VM_ALIVE -eq 0 ]
@@ -67,6 +73,9 @@ function wait_on_vm_build {
     echo "############################################################"
     echo "Waiting build process to end on VM ($VM_NAME)"
     echo "############################################################"
+    # Since the last VM was cppcheck and is removed
+    # we are going too fast in wait and the build_oai is not yet started
+    sleep 120
 
     if [[ "$VM_NAME" == *"-cppcheck"* ]]
     then
@@ -84,6 +93,12 @@ function wait_on_vm_build {
 }
 
 function check_on_vm_build {
+    if [[ "$VM_NAME" == *"-enb-usrp"* ]] || [[ "$VM_NAME" == *"-cppcheck"* ]]
+    then
+        echo "This VM type is no longer supported in the pipeline framework"
+        return
+    fi
+
     echo "############################################################"
     echo "Creating a tmp folder to store results and artifacts"
     echo "############################################################"

ci-scripts/xml_class_list.yml

@@ -19,6 +19,8 @@
   - Reboot_UE
   - Initialize_FlexranCtrl
   - Terminate_FlexranCtrl
+  - Deploy_EPC
+  - Undeploy_EPC
   - Initialize_HSS
   - Terminate_HSS
   - Initialize_MME
@@ -32,3 +34,7 @@
   - Ping_CatM_module
   - IdleSleep
   - Perform_X2_Handover
+  - Build_Image
+  - Deploy_Object
+  - Undeploy_Object
+  - Cppcheck_Analysis

ci-scripts/xml_files/benetel_multi_node_build.xml

@@ -21,57 +21,34 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>test-fr1-tm1</htmlTabRef>
-	<htmlTabName>Test-FR1-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>1</repeatCount>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
 	<TestCaseRequestedList>
- 030000
- 040000
- 000001
- 070001
- 070000
+ 000001 000002
 	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="030000">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-		<air_interface>lte</air_interface>
-	</testCase>
-
-	<testCase id="040000">
-		<class>Initialize_eNB</class>
-		<desc>Initialize gNB (3/4 sampling rate)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf -E</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-		<air_interface>nr</air_interface>
-	</testCase>
+	<TestCaseExclusionList></TestCaseExclusionList>
 
 	<testCase id="000001">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>30</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="070000">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
+		<class>Build_eNB</class>
+		<desc>Build eNB</desc>
+		<Build_eNB_args>--eNB -t benetel4g -w None</Build_eNB_args>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 		<eNB_instance>0</eNB_instance>
 		<eNB_serverId>0</eNB_serverId>
 	</testCase>
 
-	<testCase id="070001">
-		<class>Terminate_eNB</class>
-		<desc>Terminate gNB</desc>
+
+	<testCase id="000002">
+		<class>Build_eNB</class>
+		<desc>Build gNB</desc>
+		<Build_eNB_args>--gNB -t benetel5g -w None</Build_eNB_args>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 		<eNB_instance>1</eNB_instance>
 		<eNB_serverId>1</eNB_serverId>
 	</testCase>
 
-</testCaseList>
 
+
+
+</testCaseList>

ci-scripts/xml_files/benetel_nsa_base.xml

@@ -0,0 +1,162 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>TEST-FR1-TM1</htmlTabRef>
+	<htmlTabName>FR1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 010000
+ 030000
+ 040000
+ 010001
+ 000001
+ 050000
+ 050001
+ 000001
+ 060000
+ 060001
+ 000001
+ 070000
+ 070001
+ 010002
+ 000001
+ 080001
+ 080000
+ 010003
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010000">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="010003">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="010001">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="010002">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+
+	<testCase id="030000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-4g.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+   </testCase>
+
+
+	<testCase id="040000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize gNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-5g.conf</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="050000">
+		<class>Ping</class>
+		<desc>Ping: 20pings in 20sec</desc>
+		<ping_args>-c 20</ping_args>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="050001">
+		<class>Ping</class>
+		<desc>Ping: 100pings in 20sec</desc>
+		<ping_args>-c 100 -i 0.2</ping_args>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
+	</testCase>
+
+
+	<testCase id="060000">
+		<class>Iperf</class>
+		<desc>iperf (DL/2.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 2.5M -t 60 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="060001">
+		<class>Iperf</class>
+		<desc>iperf (UL/1.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 1.5M -t 60 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
+	<testCase id="070000">
+		<class>Iperf</class>
+		<desc>iperf (DL/20Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 20 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Iperf</class>
+		<desc>iperf (UL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 3M -t 20 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
+
+	<testCase id="080000">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+	</testCase>
+
+	<testCase id="080001">
+		<class>Terminate_eNB</class>
+		<desc>Terminate gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+</testCaseList>
+

ci-scripts/xml_files/container_image_build.xml

@@ -0,0 +1,40 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build Container Images</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000001
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>Build_Image</class>
+		<desc>Build all Images</desc>
+		<kind>all</kind>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/cppcheck.xml

@@ -0,0 +1,37 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>CPPCHECK Analysis</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000001
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>Cppcheck_Analysis</class>
+		<desc>Static Code Analysis with cppcheck</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_ue_usrp210_band7_ue_build.xml

@@ -32,7 +32,7 @@
 	<testCase id="090101">
 		<class>Build_OAI_UE</class>
 		<desc>Build OAI UE</desc>
-		<Build_OAI_UE_args>-w USRP --UE</Build_OAI_UE_args>
+		<Build_OAI_UE_args>-w USRP --UE --ninja</Build_OAI_UE_args>
 	</testCase>
 
 </testCaseList>

ci-scripts/xml_files/enb_usrp210_band13_test_10mhz_tm1.xml

@@ -25,6 +25,7 @@
 	<htmlTabName>Test-LTE-M-10MHz-TM1</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<repeatCount>1</repeatCount>
+	<TestUnstable>True</TestUnstable>
 	<TestCaseRequestedList>
  030201
  040102

ci-scripts/xml_files/enb_usrp210_band40_test_05mhz_tm2.xml

@@ -26,6 +26,8 @@
 	<htmlTabName>Test-05MHz-TM2</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<repeatCount>2</repeatCount>
+	<TestUnstable>True</TestUnstable>
+	<TestMinId>040608</TestMinId>
         <TestCaseRequestedList>
  030201
  040101

ci-scripts/xml_files/enb_usrp210_band40_test_10mhz_tm1.xml

@@ -24,6 +24,8 @@
 	<htmlTabRef>test-10-tm1</htmlTabRef>
 	<htmlTabName>Test-10MHz-TM1</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestUnstable>True</TestUnstable>
+	<TestMinId>040615</TestMinId>
 	<TestCaseRequestedList>
  030201
  040101

ci-scripts/xml_files/enb_usrp210_band40_test_20mhz_tm1.xml

@@ -25,6 +25,8 @@
 	<htmlTabName>Test-20MHz-TM1</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<repeatCount>4</repeatCount>
+	<TestUnstable>True</TestUnstable>
+	<TestMinId>040623</TestMinId>
 	<TestCaseRequestedList>
  030201
  040101

ci-scripts/xml_files/enb_usrp210_band40_test_20mhz_tm1_default_scheduler.xml

@@ -24,6 +24,8 @@
 	<htmlTabRef>test-20-tm1-defSched</htmlTabRef>
 	<htmlTabName>Test-20MHz-TM1-default-scheduler</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestUnstable>True</TestUnstable>
+	<TestMinId>040522</TestMinId>
 	<TestCaseRequestedList>
  030201
  040101

ci-scripts/xml_files/fr1_epc_start_verizon.xml

@@ -0,0 +1,49 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>epc-start-tab</htmlTabRef>
+	<htmlTabName>EPC-Start</htmlTabName>
+	<htmlTabIcon>log-in</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000100 000101 000102
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="000100">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+	</testCase>
+
+	<testCase id="000101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+		<option>mme-verizon.conf</option>
+	</testCase>
+
+	<testCase id="000102">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/fr1_multi_node_build.xml

@@ -37,6 +37,7 @@
 		<eNB_instance>0</eNB_instance>
 		<eNB_serverId>0</eNB_serverId>
 		<backgroundBuild>True</backgroundBuild>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 	</testCase>
 
 	<testCase id="000004">
@@ -53,6 +54,7 @@
 		<eNB_instance>1</eNB_instance>
 		<eNB_serverId>1</eNB_serverId>
 		<backgroundBuild>True</backgroundBuild>
+		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 	</testCase>
 
 	<testCase id="000003">

ci-scripts/xml_files/fr1_nsa_base.xml

@@ -0,0 +1,162 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>TEST-NSA-FR1-TM1</htmlTabRef>
+	<htmlTabName>NSA FULL</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 010000
+ 030000
+ 040000
+ 010001
+ 000001
+ 050000
+ 050001
+ 000001
+ 060000
+ 060001
+ 000001
+ 070000
+ 070001
+ 010002
+ 000001
+ 080001
+ 080000
+ 010003
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010000">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="010003">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="010001">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="010002">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+
+	<testCase id="030000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+   </testCase>
+
+
+	<testCase id="040000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize gNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf -E</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="050000">
+		<class>Ping</class>
+		<desc>Ping: 20pings in 20sec</desc>
+		<ping_args>-c 20</ping_args>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="050001">
+		<class>Ping</class>
+		<desc>Ping: 100pings in 20sec</desc>
+		<ping_args>-c 100 -i 0.2</ping_args>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
+	</testCase>
+
+
+	<testCase id="060000">
+		<class>Iperf</class>
+		<desc>iperf (DL/2.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 2.5M -t 60 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="060001">
+		<class>Iperf</class>
+		<desc>iperf (UL/1.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 1.5M -t 60 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
+	<testCase id="070000">
+		<class>Iperf</class>
+		<desc>iperf (DL/20Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 20 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Iperf</class>
+		<desc>iperf (UL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 3M -t 20 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
+
+	<testCase id="080000">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+	</testCase>
+
+	<testCase id="080001">
+		<class>Terminate_eNB</class>
+		<desc>Terminate gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+</testCaseList>
+

ci-scripts/xml_files/fr1_nsa_base_ref.xml

@@ -21,8 +21,8 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>TEST-FR1-TM1</htmlTabRef>
-	<htmlTabName>FR1</htmlTabName>
+	<htmlTabRef>TEST-NSA-FR1-TM1</htmlTabRef>
+	<htmlTabName>NSA FULL</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<TestCaseRequestedList>
  010000
@@ -32,9 +32,15 @@
  000001
  050000
  050001
- 070001
+ 000001
+ 060000
+ 060001
+ 000001
  070000
  010002
+ 000001
+ 080001
+ 080000
  010003
 	</TestCaseRequestedList>
 	<TestCaseExclusionList></TestCaseExclusionList>
@@ -89,28 +95,66 @@
 		<class>Ping</class>
 		<desc>Ping: 20pings in 20sec</desc>
 		<ping_args>-c 20</ping_args>
-		<ping_packetloss_threshold>0</ping_packetloss_threshold>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
 	</testCase>
 
 	<testCase id="050001">
 		<class>Ping</class>
-		<desc>Ping: 5pings in 1sec</desc>
-		<ping_args>-c 5 -i 0.2</ping_args>
-		<ping_packetloss_threshold>0</ping_packetloss_threshold>
+		<desc>Ping: 100pings in 20sec</desc>
+		<ping_args>-c 100 -i 0.2</ping_args>
+		<ping_packetloss_threshold>50</ping_packetloss_threshold>
 	</testCase>
 
+
+	<testCase id="060000">
+		<class>Iperf</class>
+		<desc>iperf (DL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 3M -t 20 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="060001">
+		<class>Iperf</class>
+		<desc>iperf (UL/1Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 1M -t 20 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
 	<testCase id="070000">
+		<class>Iperf</class>
+		<desc>iperf (DL/20Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 20 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Iperf</class>
+		<desc>iperf (UL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 3M -t 20 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+
+
+	<testCase id="080000">
 		<class>Terminate_eNB</class>
 		<desc>Terminate eNB</desc>
 		<eNB_instance>0</eNB_instance>
 		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
 	</testCase>
 
-	<testCase id="070001">
+	<testCase id="080001">
 		<class>Terminate_eNB</class>
 		<desc>Terminate gNB</desc>
 		<eNB_instance>1</eNB_instance>
 		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
 	</testCase>
 
 </testCaseList>

ci-scripts/xml_files/fr1_oai_cn_deploy.xml

@@ -0,0 +1,39 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>epc-deploy-tab</htmlTabRef>
+	<htmlTabName>EPC-Deploy</htmlTabName>
+	<htmlTabIcon>log-in</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000100
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="000100">
+		<class>Deploy_EPC</class>
+		<desc>Deploy all EPC containers</desc>
+		<parameters>yaml_files/fr1_epc_tim</parameters>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/fr1_oai_cn_undeploy.xml

@@ -0,0 +1,38 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>epc-undeploy-tab</htmlTabRef>
+	<htmlTabName>EPC-Undeploy</htmlTabName>
+	<htmlTabIcon>log-out</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000200
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="000200">
+		<class>Undeploy_EPC</class>
+		<desc>Undeploy all EPC containers</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/fr1_usrp210_band7_deploy_test_05mhz_tm1.xml

@@ -0,0 +1,133 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-deploy-enb-mono</htmlTabRef>
+	<htmlTabName>Test-Deploy-eNB-Mono</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>1</repeatCount>
+	<TestCaseRequestedList>
+ 040101
+ 030101 000020 040301 000021 040501 040601 040611 040641 040651 040401 040201 030201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Waiting for 60 seconds</desc>
+		<idle_sleep_time_in_sec>60</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="000002">
+		<class>IdleSleep</class>
+		<desc>Waiting for 10 seconds</desc>
+		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
+	</testCase>
+
+    <testCase id="000020">
+        <class>CheckStatusUE</class>
+        <desc>Check UE(s) status before attachment</desc>
+        <expectedNbOfConnectedUEs>0</expectedNbOfConnectedUEs>
+    </testCase>
+
+    <testCase id="000021">
+        <class>CheckStatusUE</class>
+        <desc>Check UE(s) status after attachment</desc>
+        <expectedNbOfConnectedUEs>1</expectedNbOfConnectedUEs>
+    </testCase>
+
+	<testCase id="030101">
+		<class>Deploy_Object</class>
+		<desc>Deploy eNB (FDD/Band7/5MHz) in a container</desc>
+		<yaml_path>ci-scripts/yaml_files/fr1_enb_mono_fdd_tim</yaml_path>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Undeploy_Object</class>
+		<desc>Undeploy eNB</desc>
+		<yaml_path>ci-scripts/yaml_files/fr1_enb_mono_fdd_tim</yaml_path>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="040301">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="040401">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+	<testCase id="040501">
+		<class>Ping</class>
+		<desc>ping (5MHz - 20 sec)</desc>
+		<ping_args>-c 20</ping_args>
+		<ping_packetloss_threshold>5</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040601">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040611">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)</desc>
+		<iperf_args>-t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/7.5Mbps/UDP)(30 sec)</desc>
+		<iperf_args>-u -b 7.5M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040651">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)</desc>
+		<iperf_args>-t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/fr1_usrp210_band7_test_05mhz_tm1.xml

@@ -0,0 +1,151 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+ 030101 040301 040501 040603 040604 040605 040606 040607 040641 040642 040643 040644 040401 040201 030201
+
+-->
+<testCaseList>
+	<htmlTabRef>test-05-tm1</htmlTabRef>
+	<htmlTabName>Test-05MHz-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 030201
+ 040101
+ 030101 040301 000001 040501 040603 040401 030201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --eNBs.[0].plmn_list.[0].mcc 311 --eNBs.[0].plmn_list.[0].mnc 480 --eNBs.[0].plmn_list.[0].mnc_length 3 --eNBs.[0].component_carriers.[0].Nid_cell 10</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="040301">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="040401">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+	<testCase id="040501">
+		<class>Ping</class>
+		<desc>ping (5MHz - 20 sec)</desc>
+		<ping_args>-c 20</ping_args>
+		<ping_packetloss_threshold>5</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040605">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040606">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040607">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040644">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/gnb_nr_ue_usrp_run.xml

@@ -52,7 +52,7 @@
         <testCase id="090102">
                 <class>Initialize_OAI_UE</class>
                 <desc>Initialize NR UE USRP</desc>
-		<Initialize_OAI_UE_args>--phy-test --usrp-args "addr=192.168.30.2,second_addr=192.168.50.2,clock_source=external,time_source=external" --ue-rxgain 75 --threadoffset 16 --rrc_config_path .</Initialize_OAI_UE_args>
+		<Initialize_OAI_UE_args>--phy-test --usrp-args "addr=192.168.30.2,second_addr=192.168.50.2,clock_source=external,time_source=external" --ue-rxgain 50  --rrc_config_path . --dlsch-parallel 4 </Initialize_OAI_UE_args>
 		<air_interface>NR</air_interface>
         </testCase>
 

ci-scripts/xml_files/gnb_nr_ue_usrp_run_multi_thread.xml

@@ -52,7 +52,7 @@
         <testCase id="090104">
                 <class>Initialize_OAI_UE</class>
                 <desc>Initialize NR UE USRP</desc>
-		<Initialize_OAI_UE_args>--phy-test --usrp-args "addr=192.168.30.2,second_addr=192.168.50.2,clock_source=external,time_source=external" --ue-rxgain 75 --threadoffset 16 --rrc_config_path .</Initialize_OAI_UE_args>
+		<Initialize_OAI_UE_args>--phy-test --usrp-args "addr=192.168.30.2,second_addr=192.168.50.2,clock_source=external,time_source=external" --ue-rxgain 75  --rrc_config_path . --dlsch-parallel 4 </Initialize_OAI_UE_args>
 		<air_interface>NR</air_interface>
         </testCase>