still more

.clang-format

@@ -62,7 +62,6 @@ ForEachMacros:
   - BOOST_FOREACH
   - RB_FOREACH
   - UE_iterator
-  - FOR_EACH_SEQ_ARR
 IncludeBlocks:   Preserve
 IncludeCategories:
   - Regex:           '^<ext/.*\.h>'

.gitignore

@@ -5,6 +5,7 @@
 cmake_targets/log/
 cmake_targets/*/build/
 cmake_targets/ran_build/
+cmake_targets/nas_sim_tools/build/
 log/
 lte_build_oai/
 
@@ -20,14 +21,6 @@ GRTAGS
 GTAGS
 tags
 
-# Package conffiles
-
-tools/packages/oai-lte/conffiles
-tools/packages/oai-nr/conffiles
-tools/packages/liboai-common/conffiles
-tools/packages/liboai-usrp/conffiles
-
-
 # others
 nfapi_nr_interface_scf
 *.log

CHANGELOG.md

@@ -1,117 +1,5 @@
 # RELEASE NOTES: #
 
-## [v2.4.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.4.0) -> December 2025. ##
-
-General new features and improvements (both RAN and UE):
-- Rework LDPC BBdev/AAL interface and support both AMD T2/Intel vRAN Boost
-  (VRB) 1 accelerators
-- Add a taps client for vrtsim real-time simulator (check: vrtsim release?)
-- Add new RFemulator virtual radio driver to emulate radio (including noise
-  generation) for gNB/UE standalone operation
-- RLC AM reception improvements for high-throughput scenarios (!3512)
-- Small NTN fixes (!3659, !3666, !3581, !3652)
-- Improvements to imScope
-
-Stability and bug fixes:
-- RFsimulator: fix concurrency problems during multi-client connection
-- USRP driver: support synchronization of USRP B200
-- MAC scheduler improvements
-- General L1 improvements for efficiency and stability
-- Correct PRS bug and test in CI
-- Upgrade Ubuntu container images to Ubuntu 24.04
-- All build system targets compile (`make/ninja all`)
-- Minor cleanup, harmonization, and performance improvements all over the stack
-- Simplify CI code
-
-RAN changes (gNB/CU/CU-CP/CU-UP/DU/DU-high/DU-low):
-- Support of N2 handover
-- Support of "UL-heavy" TDD patterns, e.g., DSUUU
-- Open Fronthaul M-plane: CM improvements, PM implementation, and additional
-  v16.01 support
-- Improve interoperability with Nvidia Aerial L1 to support 2 layer UL
-- Add O-RAN OSC WLS library as FAPI transport and enable L1/L2 shared memory
-  split
-- Implement FAPI Stop exchange
-- Improve interoperability with srsRAN_Project DU
-- Add new synchronized real-time data recording application (!3462)
-- Support for measurement gaps and general handover fixes
-- Support of RRC PDU session release procedure
-- Add CU-UP load tester
-- Correct BWP scheduling and support multiple BWPs per UE
-
-nrUE changes:
-- Support one additional PDU session (see !3486)
-- L3 measurements for A2 measurement reports
-- Support for type0 PDSCH frequency allocation
-- UE symbol based PDCCH receiver
-
-Regression or removals:
-- No known regressions
-- Unused L2 simulator code has been removed
-- Unused Benetel radio driver code (not FHI 7.2!) has been removed
-
-Configuration file changes:
-- `gNBs.[0].servingCellConfigCommon.[0].ra_ResponseWindow` is automatically
-  computed and can be removed
-- `gNBs.[0].bwp_list` has been added (moved from entries in
-  `gNBs.[0].servingCellConfigDedicated`)
-- `gNBs.[0].phaseTrackingRS` has been added (moved from entries in
-  `gNBs.[0].servingCellConfigDedicated`)
-- `gNBs.[0].local_s_portc` and `gNBs.[0].remote_s_portc` have no effect and
-  should be removed
-- `gNBs.[0].CSI_report_type` has been added
-- `MACRLCs.[0].ulsch_max_frame_inactivity` is automatically computed and can be
-  removed
-- `MACRLCs.[0].local_n_portc` and `MACRLCs.[0].remote_n_portc` have no effect and
-  should be removed
-- `MACRLCs.[0].stats_max_ue` has been added
-
-## [v2.3.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.3.0) -> July 2025. ##
-
-General new features and improvements (both RAN and UE):
-- Preliminary support for RedCap UEs
-- Support for NTN LEO scenarios including SIB19 and channel emulation (see
-  doc/RUNMODEM.md)
-- VRTSIM: new shared memory realtime radio (see develop/radio/vrtsim/README.md)
-- Support for TDD pattern 2
-- Support for long PRACH
-- Support for SIB2
-- Add unit tests using ctest (see doc/UnitTests.md)
-
-Stability and bug fixes:
-- Improve various procedures (e.g., RRC reestablishment, RRC Reject, ...)
-- Add improvements for ImScope
-- Bugfixes in the entire stack (e.g., #803, #805, #810, #812, #818, #852, #878,
-  #884, #890, #895, #901, #907, #932, #939 ...)
-- Documentation updates
-- And many other small fixes, like memory leaks, crashes, ...
-
-RAN changes (gNB/CU/CU-CP/CU-UP/DU/DU-high/DU-low):
-- Stability and performance improvements when running with 4-layer DL MIMO
-- Stability and performance improvements when running with 2-layer UL MIMO
-- Interoperability testing with Metanoia Jura and Foxconn RUs
-- Support of O-RAN 7.2 M-plane (Start-up procedure including configuration
-  management, see also doc/ORAN_FHI7.2_Tutorial.md)
-- Upgrade OSC FHI (xran) from E to F release
-- Refactoring of LDPC interface and performance improvements
-- Support for nFAPI in all scenarios for FR1 (see doc/nfapi.md)
-- Support at least 32 UEs concurrently
-- Improve robustness when running in split modes (F1, E1)
-- Add basic support for beam management in FR2
-- Add support for O1 on DU (see also https://gitlab.eurecom.fr/oai/o1-adapter)
-- E2 agent: Support for multiple E2SM-RC report service styles
-
-nrUE changes:
-- Refactoring of threading towards better code and performance
-- Add or rework various procedures (e.g., RA with C-RNTI, Going to Idle, RA, ...)
-- Refactor and extend NAS implementation (e.g., Service Request, Registration
-  Request, Service Acept, Service Reject, ...)
-- Support for continuous frequency offset compensation
-- Reduce minimum RX-to-TX time to 3
-
-Regression:
-- Multiple BWPs do not work reliably on gNB; use tag 2025.w17
-
 ## [v2.2.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.2.0) -> November 2024. ##
 
 General 5G improvements (both gNB and UE):

README.md

@@ -4,9 +4,10 @@
 
 <p align="center">
     <a href="https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/master/LICENSE"><img src="https://img.shields.io/badge/license-OAI--Public--V1.1-blue" alt="License"></a>
+    <a href="https://releases.ubuntu.com/20.04/"><img src="https://img.shields.io/badge/OS-Ubuntu20-Green" alt="Supported OS Ubuntu 20"></a>
     <a href="https://releases.ubuntu.com/22.04/"><img src="https://img.shields.io/badge/OS-Ubuntu22-Green" alt="Supported OS Ubuntu 22"></a>
     <a href="https://releases.ubuntu.com/24.04/"><img src="https://img.shields.io/badge/OS-Ubuntu24-Green" alt="Supported OS Ubuntu 24"></a>
-    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RHEL9"></a>
+    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RELH9"></a>
     <a href="https://getfedora.org/en/workstation/"><img src="https://img.shields.io/badge/OS-Fedore41-Green" alt="Supported OS Fedora 41"></a>
 </p>
 
@@ -15,9 +16,7 @@
 </p>
 
 <p align="center">
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu18-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu18-Image-Builder%2F&label=build-Ubuntu-x86%20Images"></a>
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-RHEL8-Cluster-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-RHEL8-Cluster-Image-Builder%2F&label=build-UBI-x86%20Images"></a>
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu-ARM-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu-ARM-Image-Builder%2F&label=build-Ubuntu-ARM%20Images"></a>
+    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Container-Parent/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Container-Parent%2F&label=build%20Images"></a>
 </p>
 
 <p align="center">

charts/physims-5g/templates/rbac.yaml

@@ -1,26 +0,0 @@
-apiVersion: rbac.authorization.k8s.io/v1
-kind: Role
-metadata:
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
-rules:
-- apiGroups:
-  - security.openshift.io
-  resourceNames:
-  - anyuid
-  resources:
-  - securitycontextconstraints
-  verbs:
-  - use
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: RoleBinding
-metadata:
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-binding
-subjects:
-- kind: ServiceAccount
-  name: {{ .Values.global.serviceAccountName }}
-  namespace: {{ .Release.Namespace }}
-roleRef:
-  kind: Role
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
-  apiGroup: rbac.authorization.k8s.io

charts/physims-5g/templates/serviceaccount.yaml

@@ -1,4 +0,0 @@
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  name: oai-physim-sa #{{ .Values.global.serviceAccountName }}

charts/physims-5g/values.yaml

@@ -1,21 +0,0 @@
-# Default values for oai-physim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global:
-  serviceAccountName: oai-physim-sa
-  namespace: "OAICICD_PROJECT"
-  image:
-    registry: local
-    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-core-for-ci-ran/oai-physim
-    version: TAG
-    # pullPolicy: IfNotPresent or Never or Always
-    pullPolicy: Always
-  # removing the node selector
-  # will place on two nodes intel 3rd gen and 5th gen with RT kernel
-  nodeSelector:
-    type: ran
-  nodeName: ''
-  resources:
-    define: false
-    requests:
-      cpu: 1.5

charts/physims/charts/dlsim.100rb+tm2/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-dlsim-100rb-tm2
+description: A Helm subchart for dlsim network function ("100rb+tm2" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - dlsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim.100rb+tm2/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-dlsim-100rb-tm2.labels" -}}
+helm.sh/chart: {{ include "oai-dlsim-100rb-tm2.chart" . }}
+{{ include "oai-dlsim-100rb-tm2.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-dlsim-100rb-tm2.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-dlsim-100rb-tm2.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-dlsim-100rb-tm2.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-dlsim-100rb-tm2.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/dlsim.100rb+tm2/templates/job.yaml

@@ -31,9 +31,8 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          ctest -R 5g --show-only=json-v1 >> physims-5g-tests.json &&
-          ctest -R 5g -j$(nproc) --output-junit physims-5g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
-          echo "FINISHED" && sleep 20
+          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.100rb+tm2" -d bin/ &&
+          echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -44,5 +43,5 @@ spec:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
       {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.physims5g }}
+      nodeName: {{ .Values.global.nodeName.dlsim100rbtm2 }}
       {{- end }}

charts/physims/charts/dlsim.100rb+tm2/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-dlsim-100rb+tm2
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-dlsim-100rb-tm2"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/dlsim.basic/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-dlsim-basic
+description: A Helm subchart for dlsim network function ("basic" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - dlsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim.basic/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-dlsim-basic.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-dlsim-basic.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-dlsim-basic.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-dlsim-basic.labels" -}}
+helm.sh/chart: {{ include "oai-dlsim-basic.chart" . }}
+{{ include "oai-dlsim-basic.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-dlsim-basic.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-dlsim-basic.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-dlsim-basic.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/dlsim.basic/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}    
+spec:
+  template:
+    metadata:
+      labels:
+         app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.basic" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }} 
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.dlsimbasic }}
+      {{- end }}

charts/physims/charts/dlsim.basic/values.yaml

@@ -0,0 +1,44 @@
+# Default values for oai-dlsim-basic
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-dlsim-basic"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources:
+   limits:
+     cpu: 100m
+     memory: 128Mi
+   requests:
+     cpu: 100m
+     memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ldpctest/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physims-5g
-description: A Helm subchart for 5G physims network function
+name: oai-ldpctest
+description: A Helm subchart for ldpctest network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,6 +24,7 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
+  - ldpctest
   - RAN
   - 5G
 

charts/physims/charts/ldpctest/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-physims-5g.name" -}}
+{{- define "oai-ldpctest.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-physims-5g.fullname" -}}
+{{- define "oai-ldpctest.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-physims-5g.chart" -}}
+{{- define "oai-ldpctest.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-physims-5g.labels" -}}
-helm.sh/chart: {{ include "oai-physims-5g.chart" . }}
-{{ include "oai-physims-5g.selectorLabels" . }}
+{{- define "oai-ldpctest.labels" -}}
+helm.sh/chart: {{ include "oai-ldpctest.chart" . }}
+{{ include "oai-ldpctest.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-physims-5g.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-physims-5g.name" . }}
+{{- define "oai-ldpctest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ldpctest.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-physims-5g.serviceAccountName" -}}
+{{- define "oai-ldpctest.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-physims-5g.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-ldpctest.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims/charts/ldpctest/templates/job.yaml

@@ -31,9 +31,8 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          ctest -R 4g --show-only=json-v1 >> physims-4g-tests.json &&
-          ctest -R 4g -j$(nproc) --output-junit physims-4g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
-          echo "FINISHED" && sleep 15
+          cmake_targets/autotests/run_exec_autotests.bash -g "ldpctest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -44,5 +43,5 @@ spec:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
       {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.physims5g }}
+      nodeName: {{ .Values.global.nodeName.ldpctest }}
       {{- end }}

charts/physims/charts/ldpctest/values.yaml

@@ -1,4 +1,4 @@
-# Default values for oai-physims-5g
+# Default values for oai-ldpctest.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
@@ -20,7 +20,7 @@ serviceAccount:
   annotations: {}
   # The name of the service account to use.
   # If not set and create is true, a name is generated using the fullname template
-  name: "oai-physims-5g"
+  name: "oai-ldpctest-sa"
 
 podSecurityContext:
   runAsUser: 0

charts/physims/charts/nr-dlschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlschsim
+description: A Helm subchart for nr-dlschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlschsim.chart" . }}
+{{ include "oai-nr-dlschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlschsim/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlschsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrdlschsim }}
+      {{- end }}

charts/physims/charts/nr-dlschsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.basic/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-basic
+description: A Helm subchart for nr-dlsim network function ("basic" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.basic/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-basic.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-basic.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-basic.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-basic.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-basic.chart" . }}
+{{ include "oai-nr-dlsim-basic.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-basic.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-basic.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-basic.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.basic/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.basic" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimbasic }}
+      {{- end }}

charts/physims/charts/nr-dlsim.basic/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-basic
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-basic"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.dmrs+ptrs/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-dmrs-ptrs
+description: A Helm subchart for nr-dlsim network function ("dmrs+ptrs" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-dmrs-ptrs.chart" . }}
+{{ include "oai-nr-dlsim-dmrs-ptrs.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-dmrs-ptrs.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-dmrs-ptrs.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.dmrs+ptrs" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimdmrsptrs }}
+      {{- end }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-dmrs+ptrs
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-dmrs-ptrs"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.mcs+mimo/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-mcs-mimo
+description: A Helm subchart for nr-dlsim network function ("mcs+mimo" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.mcs+mimo/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-mcs-mimo.chart" . }}
+{{ include "oai-nr-dlsim-mcs-mimo.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-mcs-mimo.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-mcs-mimo.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.mcs+mimo/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.mcs+mimo" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimmcsmimo }}
+      {{- end }}

charts/physims/charts/nr-dlsim.mcs+mimo/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-mcs-mimo
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-mcs-mimo"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.offset/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-offset
+description: A Helm subchart for nr-dlsim network function ("offset" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.offset/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-offset.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-offset.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-offset.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-offset.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-offset.chart" . }}
+{{ include "oai-nr-dlsim-offset.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-offset.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-offset.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-offset.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-offset.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.offset/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.offset" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimoffset }}
+      {{- end }}

charts/physims/charts/nr-dlsim.offset/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-offset
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-offset"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.106rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-106rb
+description: A Helm subchart for nr-pbchsim network function ("106rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.106rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-106rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-106rb.chart" . }}
+{{ include "oai-nr-pbchsim-106rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-106rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-106rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-106rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-106rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.106rb/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.106rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrpbschsim106rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.106rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-106rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-106rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.217rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-217rb
+description: A Helm subchart for nr-pbchsim network function ("217rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.217rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-217rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-217rb.chart" . }}
+{{ include "oai-nr-pbchsim-217rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-217rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-217rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-217rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-217rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.217rb/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.217rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim217rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.217rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-217rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-217rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.273rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-273rb
+description: A Helm subchart for nr-pbchsim network function ("273rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.273rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-273rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-273rb.chart" . }}
+{{ include "oai-nr-pbchsim-273rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-273rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-273rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-273rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-273rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.273rb/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.273rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.273rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-273rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-273rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.scs/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-scs
+description: A Helm subchart for nr-pbchsim network function ("Other SCS" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.scs/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-scs.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-scs.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-scs.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-scs.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-scs.chart" . }}
+{{ include "oai-nr-pbchsim-scs.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-scs.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-scs.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-scs.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-scs.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.scs/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.otherSCS" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.scs/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-scs
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-scs"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-prachsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-prachsim
+description: A Helm subchart for nr-prachsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-prachsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-prachsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-prachsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-prachsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-prachsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-prachsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-prachsim.chart" . }}
+{{ include "oai-nr-prachsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-prachsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-prachsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-prachsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-prachsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-prachsim/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_prachsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrprachsim }}
+      {{- end }}

charts/physims/charts/nr-prachsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-prachsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-prachsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-psbchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-psbchsim
+description: A Helm subchart for nr-psbchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-psbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-psbchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-psbchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-psbchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-psbchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-psbchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-psbchsim.chart" . }}
+{{ include "oai-nr-psbchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-psbchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-psbchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-psbchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-psbchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-psbchsim/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_psbchsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrpsbchsim }}
+      {{- end }}

charts/physims/charts/nr-psbchsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-psbchsim
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-psbchsim"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pucchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pucchsim
+description: A Helm subchart for nr-pucchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pucchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pucchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pucchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pucchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pucchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pucchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pucchsim.chart" . }}
+{{ include "oai-nr-pucchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pucchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pucchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pucchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pucchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pucchsim/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pucchsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrpucchsim }}
+      {{- end }}

charts/physims/charts/nr-pucchsim/values.yaml

@@ -0,0 +1,52 @@
+# Default values for oai-nr-pucchsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pucchsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulschsim
+description: A Helm subchart for nr-ulschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulschsim.chart" . }}
+{{ include "oai-nr-ulschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulschsim/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulschsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrulschsim }}
+      {{- end }}

charts/physims/charts/nr-ulschsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.3gpp/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-3gpp
+description: A Helm subchart for nr-ulsim network function ("3gpp" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.3gpp/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-3gpp.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-3gpp.chart" . }}
+{{ include "oai-nr-ulsim-3gpp.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-3gpp.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-3gpp.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-3gpp.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.3gpp/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.3gpp" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrulsim3gpp }}
+      {{- end }}

charts/physims/charts/nr-ulsim.3gpp/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-3gpp
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-3gpp"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.mimo/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-mimo
+description: A Helm subchart for nr-ulsim network function ("mimo" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.mimo/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-mimo.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-mimo.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-mimo.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-mimo.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-mimo.chart" . }}
+{{ include "oai-nr-ulsim-mimo.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-mimo.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-mimo.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-mimo.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.mimo/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.mimo" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmimo }}
+      {{- end }}

charts/physims/charts/nr-ulsim.mimo/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-mimo
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-mimo"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.misc/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-misc
+description: A Helm subchart for nr-ulsim network function ("misc" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.misc/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-misc.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-misc.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-misc.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-misc.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-misc.chart" . }}
+{{ include "oai-nr-ulsim-misc.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-misc.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-misc.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-misc.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.misc/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.misc" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmisc }}
+      {{- end }}

charts/physims/charts/nr-ulsim.misc/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-misc
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-misc"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.sc-fdma/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-sc-fdma
+description: A Helm subchart for nr-ulsim network function ("sc-fdma" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.sc-fdma/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-sc-fdma.chart" . }}
+{{ include "oai-nr-ulsim-sc-fdma.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-sc-fdma.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.sc-fdma/templates/job.yaml

@@ -0,0 +1,49 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.sc-fdma" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.nrulsimscfdma }}
+      {{- end }}

charts/physims/charts/nr-ulsim.sc-fdma/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-sc-fdma
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-sc-fdma"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/polartest/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physim
-description: A Helm chart for physical simulators network function
+name: oai-polartest
+description: A Helm subchart for polartest network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -16,17 +16,17 @@ icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_fin
 
 # This is the chart version. This version number should be incremented each time you make changes
 # to the chart and its templates, including the app version.
-version: 1.0.0
+version: 0.1.1
 
 # This is the version number of the application being deployed. This version number should be
 # incremented each time you make changes to the application.
 appVersion: v1
 
 keywords:
-  - Physical Simulators
+  - Physical Simulator
+  - polartest
   - RAN
   - 4G
-  - 5G
 
 sources:
   - https://gitlab.eurecom.fr/oai/openairinterface5g

charts/physims/charts/polartest/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-physims-4g.name" -}}
+{{- define "oai-polartest.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-physims-4g.fullname" -}}
+{{- define "oai-polartest.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-physims-4g.chart" -}}
+{{- define "oai-polartest.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-physims-4g.labels" -}}
-helm.sh/chart: {{ include "oai-physims-4g.chart" . }}
-{{ include "oai-physims-4g.selectorLabels" . }}
+{{- define "oai-polartest.labels" -}}
+helm.sh/chart: {{ include "oai-polartest.chart" . }}
+{{ include "oai-polartest.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-physims-4g.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-physims-4g.name" . }}
+{{- define "oai-polartest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-polartest.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-physims-4g.serviceAccountName" -}}
+{{- define "oai-polartest.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-physims-4g.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-polartest.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims/charts/polartest/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "polartest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.polartest }}
+      {{- end }}

charts/physims/charts/polartest/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-polartest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-polartest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/smallblocktest/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-smallblocktest
+description: A Helm subchart for smallblocktest network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - smallblocktest
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/smallblocktest/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-smallblocktest.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-smallblocktest.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-smallblocktest.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-smallblocktest.labels" -}}
+helm.sh/chart: {{ include "oai-smallblocktest.chart" . }}
+{{ include "oai-smallblocktest.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-smallblocktest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-smallblocktest.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-smallblocktest.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-smallblocktest.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/smallblocktest/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "smallblocktest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.smallblocktest }}
+      {{- end }}

charts/physims/charts/smallblocktest/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-smallblocktest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-smallblocktest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ulsim/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physims-4g
-description: A Helm subchart for 4G physims network function
+name: oai-ulsim
+description: A Helm subchart for ulsim network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,6 +24,7 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
+  - ulsim
   - RAN
   - 4G
 

charts/physims/charts/ulsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-ulsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-ulsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-ulsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-ulsim.labels" -}}
+helm.sh/chart: {{ include "oai-ulsim.chart" . }}
+{{ include "oai-ulsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-ulsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ulsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-ulsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/ulsim/templates/job.yaml

@@ -0,0 +1,47 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        {{- if .Values.global.resources.define}}
+        resources:
+          requests:
+            cpu: {{ .Values.global.resources.requests.cpu | quote }}
+        {{- end}}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "ulsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName}}
+      nodeName: {{ .Values.global.nodeName.ulsim }}
+      {{- end }}