fixed issues arisen from MR review

integration_2022_wk19b

See merge request oai/openairinterface5g!1555

MR !1357: Bupt UL-MIMO
MR !1516: NR handling 2-port PMI report
MR !1454: Implementation of multiple dedicated BWPs
MR !1556: Fix RAN-gNB-nrUE-MONO-TDD-Band78-N300 pipeline

charts/physims/charts/dlsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/ldpctest/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/nr-dlschsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/nr-dlsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/nr-pbchsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/nr-prachsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/nr-pucchsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/nr-ulschsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/nr-ulsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/polartest/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/smallblocktest/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/charts/ulsim/values.yaml

@@ -4,11 +4,11 @@
 
 replicaCount: 1
 
-namespace: "oaicicd-ran-tmp"
+namespace: "OAICICD_PROJECT"
 
 image:
   registry: local
-  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
   version: temp
   # pullPolicy: IfNotPresent or Never or Always
   pullPolicy: Always

charts/physims/templates/rbac.yaml

@@ -1,12 +1,26 @@
-apiVersion: rbac.authorization.k8s.io/v1beta1
-kind: ClusterRoleBinding
+apiVersion: rbac.authorization.k8s.io/v1
+kind: Role
 metadata:
-  name: {{ .Chart.Name }}-{{ .Values.global.namespace }}-rbac
-roleRef:
-  apiGroup: rbac.authorization.k8s.io
-  kind: ClusterRole
-  name: cluster-admin
+  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
+rules:
+- apiGroups:
+  - security.openshift.io
+  resourceNames:
+  - privileged
+  resources:
+  - securitycontextconstraints
+  verbs:
+  - use
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: RoleBinding
+metadata:
+  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-binding
 subjects:
 - kind: ServiceAccount
   name: {{ .Values.global.serviceAccountName }}
-  namespace: {{ .Values.global.namespace }}
+  namespace: {{ .Release.Namespace }}
+roleRef:
+  kind: Role
+  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
+  apiGroup: rbac.authorization.k8s.io

charts/physims/values.yaml

@@ -4,9 +4,9 @@
 
 global:
   serviceAccountName: oai-physim-sa
-  namespace: "oaicicd-ran-tmp"
+  namespace: "OAICICD_PROJECT"
   image:
-    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+    repository: image-registry.openshift-image-registry.svc:5000/OAICICD_PROJECT/oai-physim
     version: TAG
 
 ## Declaring values specific to coressponding physim to overwrite

ci-scripts/Jenkinsfile-push-registry

@@ -26,6 +26,9 @@ def nodeExecutor = params.nodeExecutor
 // Name of the phone resource
 def ciServerResource = params.serverResource
 
+// Docker Hub account to push to
+def DH_Account = "oaisoftwarealliance"
+
 pipeline {
   agent {
     label nodeExecutor
@@ -66,11 +69,11 @@ pipeline {
             def listOfImages = ["oai-enb", "oai-gnb", "oai-lte-ue", "oai-nr-ue"]
             sh "docker login -u ${DH_Username} -p ${DH_Password} > /dev/null 2>&1"
             listOfImages.eachWithIndex { item, iindex ->
-              sh "docker image tag ${item}:develop ${DH_Username}/${item}:develop"
-              sh "docker image tag ${item}:develop ${DH_Username}/${item}:${WEEK_TAG}"
-              sh "docker push --quiet ${DH_Username}/${item}:${WEEK_TAG}"
-              sh "docker push --quiet ${DH_Username}/${item}:develop"
-              sh "docker rmi ${DH_Username}/${item}:${WEEK_TAG} ${DH_Username}/${item}:develop"
+              sh "docker image tag ${item}:develop ${DH_Account}/${item}:develop"
+              sh "docker image tag ${item}:develop ${DH_Account}/${item}:${WEEK_TAG}"
+              sh "docker push --quiet ${DH_Account}/${item}:${WEEK_TAG}"
+              sh "docker push --quiet ${DH_Account}/${item}:develop"
+              sh "docker rmi ${DH_Account}/${item}:${WEEK_TAG} ${DH_Account}/${item}:develop"
             }
             sh "docker logout > /dev/null 2>&1"
           }

ci-scripts/Jenkinsfile-trig-nsa

@@ -113,6 +113,21 @@ pipeline {
                         GitPostArgs += jobName + ' ' + build_url + ' ' + build_id + ' ' + jobResult + ' '
                         echo GitPostArgs
 
+                        //calling SA-AmariS
+                        jobName = "RAN-SA-AmariS-CN5G"
+                        jobStatus =  build job: jobName, wait : true, propagate : false, parameters: [
+                            string(name: 'eNB_MR', value: String.valueOf(MR)),
+                            string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
+                            string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
+                            string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
+                            booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE))
+                        ]
+                        jobResult = jobStatus.getResult()
+                        build_url = jobStatus.getAbsoluteUrl()
+                        build_id = jobStatus.getNumber().toString()
+                        GitPostArgs += jobName + ' ' + build_url + ' ' + build_id + ' ' + jobResult + ' '
+                        echo GitPostArgs
+
                         //calling OAIUE N310-X300
                         jobName = "RAN-SA-OAIUE-N310-X300-CN5G"
                         jobStatus =  build job: jobName, wait : true, propagate : false, parameters: [

ci-scripts/build_fr1_template.yaml

@@ -14,7 +14,7 @@ steps:
 
 
 ADB: #on Caracal
-  ADBIPAddress : 192.168.18.196
+  ADBIPAddress : 172.21.16.132
   ADBUserName : oaici
   ADBPassword : KkexF6CErOi1fNuebCPsuIVK
 

ci-scripts/checkCodingFormattingRules.sh

@@ -59,7 +59,7 @@ if [ $# -eq 0 ]
 then
     echo " ---- Checking the whole repository ----"
     echo ""
-    NB_FILES_TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt --recursive *.c *.h | grep -c Formatted || true`
+    NB_FILES_TO_FORMAT=`astyle --dry-run --options=ci-scripts/astyle-options.txt --recursive --exclude=ci-scripts --exclude=cmake_targets *.c *.h | grep -c Formatted || true`
     echo "Nb Files that do NOT follow OAI rules: $NB_FILES_TO_FORMAT"
     echo $NB_FILES_TO_FORMAT > ./oai_rules_result.txt
 
@@ -136,7 +136,7 @@ fi
 # Merge request scenario
 
 MERGE_COMMMIT=`git log -n1 --pretty=format:%H`
-TARGET_INIT_COMMIT=`cat .git/refs/remotes/origin/$TARGET_BRANCH`
+TARGET_INIT_COMMIT=`git log -n1 --pretty=format:%H origin/$TARGET_BRANCH`
 
 echo " ---- Checking the modified files by the merge request ----"
 echo ""

ci-scripts/ci_ueinfra.yaml

@@ -12,7 +12,7 @@ idefix:
   LogStore : /media/usb-drive/ci_qlogs
   PLMN : 22201
   UENetwork : wwan0 
-  HostIPAddress : 192.168.18.188
+  HostIPAddress : 172.21.16.135
   HostUsername : oaicicd
   HostPassword : oaicicd
   HostSourceCodePath : none
@@ -32,7 +32,7 @@ nrmodule2_quectel:
   LogStore : /media/ci_qlogs  
   PLMN : 20897
   UENetwork : wwan0
-  HostIPAddress : 192.168.18.189
+  HostIPAddress : 172.21.16.139
   HostUsername : nrmodule2 
   HostPassword : linux 
   HostSourceCodePath : none
@@ -40,6 +40,7 @@ nrmodule2_quectel:
     - sudo -S ip link set dev wwan1 mtu 1500
   MTU : 1500
 
+# CAUTION: 192.168.18.89 address has to be changed when the server is moved
 #single UE single ping
 amarisoft_ue_1:
   ID: amarisoft_ue_1
@@ -54,7 +55,7 @@ amarisoft_ue_1:
   Duration : 60
   Ping : /tmp/test_ue1.log
   UELog : /tmp/ue1.log
-  HostIPAddress : 192.168.18.89
+  HostIPAddress : 172.21.16.144
   HostUsername : root
   HostPassword : toor 
   HostSourceCodePath : /tmp
@@ -97,7 +98,7 @@ dummy:
   DetachScript : ''
   PLMN : 22201
   UENetwork : wwan0
-  HostIPAddress : 192.168.18.188
+  HostIPAddress : 172.21.16.135
   HostUsername : oaicicd
   HostPassword : oaicicd
   HostSourceCodePath : none

ci-scripts/cls_containerize.py

@@ -243,7 +243,7 @@ class Containerize():
 		# Build the base image only on Push Events (not on Merge Requests)
 		# On when the base image docker file is being modified.
 		if forceBaseImageBuild:
-			mySSH.command(self.cli + ' build ' + self.cliBuildOptions + ' --target ' + baseImage + ' --tag ' + baseImage + ':' + baseTag + ' --file docker/Dockerfile.base' + self.dockerfileprefix + ' --build-arg NEEDED_GIT_PROXY="http://proxy.eurecom.fr:8080" . > cmake_targets/log/ran-base.log 2>&1', '\$', 1600)
+			mySSH.command(self.cli + ' build ' + self.cliBuildOptions + ' --target ' + baseImage + ' --tag ' + baseImage + ':' + baseTag + ' --file docker/Dockerfile.base' + self.dockerfileprefix + ' . > cmake_targets/log/ran-base.log 2>&1', '\$', 1600)
 		# First verify if the base image was properly created.
 		status = True
 		mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + baseImage + ':' + baseTag, '\$', 5)
@@ -294,6 +294,9 @@ class Containerize():
 			if image != 'ran-build':
 				mySSH.command('sed -i -e "s#' + "ran-build" + ':latest#' + "ran-build" + ':' + imageTag + '#" docker/Dockerfile.' + pattern + self.dockerfileprefix, '\$', 5)
 			mySSH.command(self.cli + ' build ' + self.cliBuildOptions + ' --target ' + image + ' --tag ' + image + ':' + imageTag + ' --file docker/Dockerfile.' + pattern + self.dockerfileprefix + ' . > cmake_targets/log/' + image + '.log 2>&1', '\$', 1200)
+			# Flatten Image
+			if image != 'ran-build':
+				mySSH.command('python3 ./ci-scripts/flatten_image.py --tag ' + image + ':' + imageTag, '\$', 300)
 			# split the log
 			mySSH.command('mkdir -p cmake_targets/log/' + image, '\$', 5)
 			mySSH.command('python3 ci-scripts/docker_log_split.py --logfilename=cmake_targets/log/' + image + '.log', '\$', 5)
@@ -1146,19 +1149,19 @@ class Containerize():
 			mySSH.open(ipAddr, userName, password)
 			# Check if route to asterix gnb exists
 			mySSH.command('ip route | grep --colour=never "192.168.68.64/26"', '\$', 10)
-			result = re.search('192.168.18.194', mySSH.getBefore())
+			result = re.search('172.21.16.127', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.64/26 via 192.168.18.194 dev eno1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.64/26 via 172.21.16.127 dev eno1', '\$', 10)
 			# Check if route to obelix enb exists
 			mySSH.command('ip route | grep --colour=never "192.168.68.128/26"', '\$', 10)
-			result = re.search('192.168.18.193', mySSH.getBefore())
+			result = re.search('172.21.16.128', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.128/26 via 192.168.18.193 dev eno1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.128/26 via 172.21.16.128 dev eno1', '\$', 10)
 			# Check if route to nepes gnb exists
 			mySSH.command('ip route | grep --colour=never "192.168.68.192/26"', '\$', 10)
-			result = re.search('192.168.18.209', mySSH.getBefore())
+			result = re.search('172.21.16.137', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.192/26 via 192.168.18.209 dev eno1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.192/26 via 172.21.16.137 dev eno1', '\$', 10)
 			# Check if forwarding is enabled
 			mySSH.command('sysctl net.ipv4.conf.all.forwarding', '\$', 10)
 			result = re.search('net.ipv4.conf.all.forwarding = 1', mySSH.getBefore())
@@ -1174,19 +1177,19 @@ class Containerize():
 			mySSH.open(ipAddr, userName, password)
 			# Check if route to porcepix epc exists
 			mySSH.command('ip route | grep --colour=never "192.168.61.192/26"', '\$', 10)
-			result = re.search('192.168.18.210', mySSH.getBefore())
+			result = re.search('172.21.16.136', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.61.192/26 via 192.168.18.210 dev em1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.61.192/26 via 172.21.16.136 dev em1', '\$', 10)
 			# Check if route to porcepix cn5g exists
 			mySSH.command('ip route | grep --colour=never "192.168.70.128/26"', '\$', 10)
-			result = re.search('192.168.18.210', mySSH.getBefore())
+			result = re.search('172.21.16.136', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.70.128/26 via 192.168.18.210 dev em1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.70.128/26 via 172.21.16.136 dev em1', '\$', 10)
 			# Check if X2 route to obelix enb exists
 			mySSH.command('ip route | grep --colour=never "192.168.68.128/26"', '\$', 10)
-			result = re.search('192.168.18.193', mySSH.getBefore())
+			result = re.search('172.21.16.128', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.128/26 via 192.168.18.193 dev em1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.128/26 via 172.21.16.128 dev em1', '\$', 10)
 			# Check if forwarding is enabled
 			mySSH.command('sysctl net.ipv4.conf.all.forwarding', '\$', 10)
 			result = re.search('net.ipv4.conf.all.forwarding = 1', mySSH.getBefore())
@@ -1202,19 +1205,19 @@ class Containerize():
 			mySSH.open(ipAddr, userName, password)
 			# Check if route to porcepix epc exists
 			mySSH.command('ip route | grep --colour=never "192.168.61.192/26"', '\$', 10)
-			result = re.search('192.168.18.210', mySSH.getBefore())
+			result = re.search('172.21.16.136', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.61.192/26 via 192.168.18.210 dev eno1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.61.192/26 via 172.21.16.136 dev eno1', '\$', 10)
 			# Check if X2 route to asterix gnb exists
 			mySSH.command('ip route | grep --colour=never "192.168.68.64/26"', '\$', 10)
-			result = re.search('192.168.18.194', mySSH.getBefore())
+			result = re.search('172.21.16.127', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.64/26 via 192.168.18.194 dev eno1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.64/26 via 172.21.16.127 dev eno1', '\$', 10)
 			# Check if X2 route to nepes gnb exists
 			mySSH.command('ip route | grep --colour=never "192.168.68.192/26"', '\$', 10)
-			result = re.search('192.168.18.209', mySSH.getBefore())
+			result = re.search('172.21.16.137', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.192/26 via 192.168.18.209 dev eno1', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.192/26 via 172.21.16.137 dev eno1', '\$', 10)
 			# Check if forwarding is enabled
 			mySSH.command('sysctl net.ipv4.conf.all.forwarding', '\$', 10)
 			result = re.search('net.ipv4.conf.all.forwarding = 1', mySSH.getBefore())
@@ -1230,14 +1233,14 @@ class Containerize():
 			mySSH.open(ipAddr, userName, password)
 			# Check if route to porcepix epc exists
 			mySSH.command('ip route | grep --colour=never "192.168.61.192/26"', '\$', 10)
-			result = re.search('192.168.18.210', mySSH.getBefore())
+			result = re.search('172.21.16.136', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.61.192/26 via 192.168.18.210 dev enp0s31f6', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.61.192/26 via 172.21.16.136 dev enp0s31f6', '\$', 10)
 			# Check if X2 route to obelix enb exists
 			mySSH.command('ip route | grep --colour=never "192.168.68.128/26"', '\$', 10)
-			result = re.search('192.168.18.193', mySSH.getBefore())
+			result = re.search('172.21.16.128', mySSH.getBefore())
 			if result is None:
-				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.128/26 via 192.168.18.193 dev enp0s31f6', '\$', 10)
+				mySSH.command('echo ' + password + ' | sudo -S ip route add 192.168.68.128/26 via 172.21.16.128 dev enp0s31f6', '\$', 10)
 			# Check if forwarding is enabled
 			mySSH.command('sysctl net.ipv4.conf.all.forwarding', '\$', 10)
 			result = re.search('net.ipv4.conf.all.forwarding = 1', mySSH.getBefore())

ci-scripts/cls_log_mgt.py

@@ -64,10 +64,10 @@ class Log_Mgt:
 		if m is not None:
 			return int(m.group(1))
 
-	def __RemoveOldest(self):
+	def __RemoveOldest(self, days):
 		mySSH = sshconnection.SSHConnection()
 		mySSH.open(self.IPAddress, self.Username, self.Password)
-		COMMAND='echo ' + self.Password + ' | sudo -S find ' + self.path + ' -type f -mtime +14 -delete'
+		COMMAND='echo ' + self.Password + ' | sudo -S find ' + self.path + ' -type f -mtime +' +  str(days) + ' -delete'
 		mySSH.command(COMMAND,'\$',20)
 		mySSH.close()
 
@@ -79,13 +79,18 @@ class Log_Mgt:
 
 
 	def LogRotation(self):
-		used_space = self.__CheckUsedSpace() #avail space in target folder
-		if used_space > 80 :
-			logging.debug('\u001B[1;37;41m  Used Disk > 80%, on '  + self.Username+'@'+self.IPAddress + '\u001B[0m')
-			logging.debug('\u001B[1;37;41m  Removing Artifacts older than 14 days \u001B[0m')
-			self.__RemoveOldest()
-		else:
-			logging.debug('Used Disk < 80%, on '  + self.Username+'@'+self.IPAddress +', no cleaning required')
+		doLoop = True
+		nbDays = 14
+		while doLoop and nbDays > 1:
+			used_space = self.__CheckUsedSpace() #avail space in target folder
+			if used_space > 80 :
+				logging.debug('\u001B[1;37;41m  Used Disk (' + str(used_space) + '%) > 80%, on '  + self.Username+'@'+self.IPAddress + '\u001B[0m')
+				logging.debug('\u001B[1;37;41m  Removing Artifacts older than ' + str(nbDays) + ' days \u001B[0m')
+				self.__RemoveOldest(nbDays)
+				nbDays -= 1
+			else:
+				logging.debug('Used Disk (' + str(used_space) + '%) < 80%, on '  + self.Username+'@'+self.IPAddress +', no cleaning required')
+				doLoop = False
 
 
 			

ci-scripts/cls_module_ue.py

@@ -107,14 +107,15 @@ class Module_UE:
 	def GetModuleIPAddress(self):
 		HOST=self.HostUsername+'@'+self.HostIPAddress
 		response= []
-		tentative = 3 
+		tentative = 8
 		while (len(response)==0) and (tentative>0):
 			COMMAND="ip a show dev " + self.UENetwork + " | grep --colour=never inet | grep " + self.UENetwork
-			logging.debug(COMMAND)
+			if tentative == 8:
+				logging.debug(COMMAND)
 			ssh = subprocess.Popen(["ssh", "%s" % HOST, COMMAND],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE)
 			response = ssh.stdout.readlines()
 			tentative-=1
-			time.sleep(10)
+			time.sleep(2)
 		if (tentative==0) and (len(response)==0):
 			logging.debug('\u001B[1;37;41m Module IP Address Not Found! Time expired \u001B[0m')
 			return -1

ci-scripts/cls_oaicitest.py

@@ -439,7 +439,7 @@ class OaiCiTest():
 					while cnt < 4:
 						Module_UE.Command("wup")
 						logging.debug("Waiting for IP address to be assigned")
-						time.sleep(20)
+						time.sleep(5)
 						logging.debug("Retrieve IP address")
 						status=Module_UE.GetModuleIPAddress()
 						if status==0:
@@ -1111,7 +1111,7 @@ class OaiCiTest():
 			while cnt < 4:
 				Module_UE.Command("wup")
 				logging.debug("Waiting for IP address to be assigned")
-				time.sleep(20)
+				time.sleep(5)
 				logging.debug("Retrieve IP address")
 				status=Module_UE.GetModuleIPAddress()
 				if status==0:

ci-scripts/cls_physim.py

@@ -32,7 +32,7 @@ import logging
 #to create a SSH object locally in the methods
 import sshconnection
 #to update the HTML object
-import html
+import cls_oai_html
 from multiprocessing import SimpleQueue
 #for log folder maintenance
 import os
@@ -168,7 +168,7 @@ class PhySim:
 
 		mySSH.close()
 		#check build status and update HTML object
-		lHTML = html.HTMLManagement()
+		lHTML = cls_oai_html.HTMLManagement()
 		lHTML=self.__CheckBuild_PhySim(htmlObj,constObj)
 		return lHTML
 
@@ -186,6 +186,6 @@ class PhySim:
 		mySSH.command(self.__workSpacePath+'ran_build/build/ldpctest ' + self.runargs + ' >> '+self.__runLogFile, '\$', 30)
 		mySSH.close()
 		#return updated HTML to main
-		lHTML = html.HTMLManagement()
+		lHTML = cls_oai_html.HTMLManagement()
 		lHTML=self.__CheckResults_PhySim(htmlObj,constObj,testcase_id)
 		return lHTML

ci-scripts/cls_physim1.py

@@ -33,7 +33,7 @@
 #-----------------------------------------------------------
 import logging
 import sshconnection as SSH
-import html
+import cls_oai_html
 import os
 import re
 import time
@@ -153,6 +153,7 @@ class PhySim:
 		mySSH.command(f'oc project {ocProjectName}', '\$', 30)
 		if mySSH.getBefore().count(f'Already on project "{ocProjectName}"') == 0 and mySSH.getBefore().count(f'Now using project "{self.OCProjectName}"') == 0:
 			logging.error(f'\u001B[1m Unable to access OC project {ocProjectName}\u001B[0m')
+			mySSH.command('oc logout', '\$', 30)
 			mySSH.close()
 			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_PROJECT_FAIL)
 			RAN.prematureExit = True
@@ -161,9 +162,10 @@ class PhySim:
 			logging.debug(f'\u001B[1m   Now using project {ocProjectName}\u001B[0m')
 
 		# Tag the image and push to the OC cluster
-		mySSH.command('oc whoami -t | sudo podman login -u ' + ocUserName + ' --password-stdin https://default-route-openshift-image-registry.apps.5glab.nsa.eurecom.fr/ --tls-verify=false', '\$', 30)
+		mySSH.command('oc whoami -t | sudo podman login -u ' + ocUserName + ' --password-stdin https://default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/ --tls-verify=false', '\$', 30)
 		if mySSH.getBefore().count('Login Succeeded!') == 0:
 			logging.error('\u001B[1m Podman Login to OC Cluster Registry Failed\u001B[0m')
+			mySSH.command('oc logout', '\$', 30)
 			mySSH.close()
 			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_LOGIN_FAIL)
 			RAN.prematureExit = True
@@ -171,9 +173,11 @@ class PhySim:
 		else:
 			logging.debug('\u001B[1m Podman Login to OC Cluster Registry Successfully\u001B[0m')
 		time.sleep(2)
-		mySSH.command('oc create -f openshift/oai-physim-image-stream.yml', '\$', 30)
+		mySSH.command('oc create -f openshift/oai-physim-image-stream.yml || true', '\$', 30)
 		if mySSH.getBefore().count('(AlreadyExists):') == 0 and mySSH.getBefore().count('created') == 0:
 			logging.error(f'\u001B[1m Image Stream "oai-physim" Creation Failed on OC Cluster {ocProjectName}\u001B[0m')
+			mySSH.command('sudo podman logout https://default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/', '\$', 6)
+			mySSH.command('oc logout', '\$', 30)
 			mySSH.close()
 			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_IS_FAIL)
 			RAN.prematureExit = True
@@ -181,11 +185,13 @@ class PhySim:
 		else:
 			logging.debug(f'\u001B[1m   Image Stream "oai-physim" created on OC project {ocProjectName}\u001B[0m')
 		time.sleep(2)
-		mySSH.command(f'sudo podman tag oai-physim:{imageTag} default-route-openshift-image-registry.apps.5glab.nsa.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 30)
+		mySSH.command(f'sudo podman tag oai-physim:{imageTag} default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 30)
 		time.sleep(2)
-		mySSH.command(f'sudo podman push default-route-openshift-image-registry.apps.5glab.nsa.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag} --tls-verify=false', '\$', 180)
+		mySSH.command(f'sudo podman push default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag} --tls-verify=false', '\$', 180)
 		if mySSH.getBefore().count('Storing signatures') == 0:
 			logging.error('\u001B[1m Image "oai-physim" push to OC Cluster Registry Failed\u001B[0m')
+			mySSH.command('sudo podman logout https://default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/', '\$', 6)
+			mySSH.command('oc logout', '\$', 30)
 			mySSH.close()
 			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_IS_FAIL)
 			RAN.prematureExit = True
@@ -195,8 +201,9 @@ class PhySim:
 
 		# Using helm charts deployment
 		time.sleep(5)
+		mySSH.command(f'grep -rl OAICICD_PROJECT ./charts/ | xargs sed -i -e "s#OAICICD_PROJECT#{ocProjectName}#"', '\$', 30)
 		mySSH.command(f'sed -i -e "s#TAG#{imageTag}#g" ./charts/physims/values.yaml', '\$', 6)
-		mySSH.command('helm install physim ./charts/physims/ | tee -a cmake_targets/log/physim_helm_summary.txt 2>&1', '\$', 30)
+		mySSH.command('helm install physim ./charts/physims/ 2>&1 | tee -a cmake_targets/log/physim_helm_summary.txt', '\$', 30)
 		if mySSH.getBefore().count('STATUS: deployed') == 0:
 			logging.error('\u001B[1m Deploying PhySim Failed using helm chart on OC Cluster\u001B[0m')
 			mySSH.command('helm uninstall physim >> cmake_targets/log/physim_helm_summary.txt 2>&1', '\$', 30)
@@ -206,8 +213,10 @@ class PhySim:
 				mySSH.command('oc get pods -l app.kubernetes.io/instance=physim', '\$', 6, resync=True)
 				if re.search('No resources found', mySSH.getBefore()):
 					isFinished1 = True
-			mySSH.command(f'sudo podman rmi default-route-openshift-image-registry.apps.5glab.nsa.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 30)
+			mySSH.command(f'sudo podman rmi default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 30)
 			mySSH.command('oc delete is oai-physim', '\$', 30)
+			mySSH.command('sudo podman logout https://default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/', '\$', 6)
+			mySSH.command('oc logout', '\$', 30)
 			mySSH.close()
 			self.AnalyzeLogFile_phySim(HTML)
 			RAN.prematureExit = True
@@ -227,7 +236,7 @@ class PhySim:
 		if isRunning == False:
 			logging.error('\u001B[1m Some PODS Running FAILED \u001B[0m')
 			mySSH.command('oc get pods -l app.kubernetes.io/instance=physim 2>&1 | tee -a cmake_targets/log/physim_pods_summary.txt', '\$', 6)
-			mySSH.command('helm uninstall physim >> cmake_targets/log/physim_helm_summary.txt 2>&1', '\$', 6)
+			mySSH.command('helm uninstall physim 2>&1 >> cmake_targets/log/physim_helm_summary.txt', '\$', 6)
 			self.AnalyzeLogFile_phySim(HTML)
 			isFinished1 = False
 			while(isFinished1 == False):
@@ -235,8 +244,10 @@ class PhySim:
 				mySSH.command('oc get pods -l app.kubernetes.io/instance=physim', '\$', 6, resync=True)
 				if re.search('No resources found', mySSH.getBefore()):
 					isFinished1 = True
-			mySSH.command(f'sudo podman rmi default-route-openshift-image-registry.apps.5glab.nsa.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 6)
+			mySSH.command(f'sudo podman rmi default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 6)
 			mySSH.command('oc delete is oai-physim', '\$', 6)
+			mySSH.command('sudo podman logout https://default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/', '\$', 6)
+			mySSH.command('oc logout', '\$', 30)
 			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_PHYSIM_DEPLOY_FAIL)
 			HTML.CreateHtmlTestRowPhySimTestResult(self.testSummary,self.testResult)
 			RAN.prematureExit = True
@@ -293,9 +304,10 @@ class PhySim:
 				isFinished1 = True
 		if isFinished1 == True:
 			logging.debug('\u001B[1m UnDeployed PhySim Successfully on OC Cluster\u001B[0m')
-		mySSH.command(f'sudo podman rmi default-route-openshift-image-registry.apps.5glab.nsa.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 6)
+		mySSH.command(f'sudo podman rmi default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/{self.OCProjectName}/oai-physim:{imageTag}', '\$', 6)
 		mySSH.command('oc delete is oai-physim', '\$', 6)
 		logging.debug('\u001B[1m Deleted the Image and ImageStream\u001B[0m')
+		mySSH.command('sudo podman logout https://default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/', '\$', 6)
 		mySSH.command('oc logout', '\$', 6)
 		mySSH.close()
 		self.AnalyzeLogFile_phySim(HTML)

ci-scripts/cls_static_code_analysis.py

@@ -37,6 +37,7 @@ import logging
 import os
 from pathlib import Path
 import time
+from multiprocessing import Process, Lock, SimpleQueue
 
 #-----------------------------------------------------------
 # OAI Testing modules
@@ -237,3 +238,205 @@ class StaticCodeAnalysis():
 
 		return 0
 
+	def LicenceAndFormattingCheck(self, HTML):
+		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		lIpAddr = self.eNBIPAddress
+		lUserName = self.eNBUserName
+		lPassWord = self.eNBPassword
+		lSourcePath = self.eNBSourceCodePath
+
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('Building on server: ' + lIpAddr)
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+
+		self.testCase_id = HTML.testCase_id
+
+		# on RedHat/CentOS .git extension is mandatory
+		result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
+		if result is not None:
+			full_ran_repo_name = self.ranRepository.replace('git/', 'git')
+		else:
+			full_ran_repo_name = self.ranRepository + '.git'
+		mySSH.command('mkdir -p ' + lSourcePath, '\$', 5)
+		mySSH.command('cd ' + lSourcePath, '\$', 5)
+		mySSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600)
+		# Raphael: here add a check if git clone or git fetch went smoothly
+		mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
+		mySSH.command('git config user.name "OAI Jenkins"', '\$', 5)
+
+		mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
+		mySSH.command('mkdir -p cmake_targets/log', '\$', 5)
+		# if the commit ID is provided use it to point to it
+		if self.ranCommitID != '':
+			mySSH.command('git checkout -f ' + self.ranCommitID, '\$', 30)
+		# if the branch is not develop, then it is a merge request and we need to do
+		# the potential merge. Note that merge conflicts should already been checked earlier
+		argToPass = ''
+		if (self.ranAllowMerge):
+			argToPass = '--build-arg MERGE_REQUEST=true --build-arg SRC_BRANCH=' + self.ranBranch
+			if self.ranTargetBranch == '':
+				if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
+					mySSH.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
+					argToPass += ' --build-arg TARGET_BRANCH=develop '
+			else:
+				logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
+				mySSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
+				argToPass += ' --build-arg TARGET_BRANCH=' + self.ranTargetBranch + ' '
+
+		mySSH.command('docker image rm oai-formatting-check:latest || true', '\$', 60)
+		mySSH.command('docker build --target oai-formatting-check --tag oai-formatting-check:latest ' + argToPass + '--file ci-scripts/docker/Dockerfile.formatting.bionic . > cmake_targets/log/oai-formatting-check.txt 2>&1', '\$', 600)
+
+		mySSH.command('docker image rm oai-formatting-check:latest || true', '\$', 60)
+		mySSH.command('docker image prune --force', '\$', 60)
+		mySSH.command('docker volume prune --force', '\$', 60)
+
+		# Analyzing the logs
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
+		mySSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
+		mySSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
+		mySSH.close()
+
+		mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/build_log_' + self.testCase_id + '/*', '.')
+
+		finalStatus = 0
+		if (os.path.isfile('./oai-formatting-check.txt')):
+			analyzed = False
+			nbFilesNotFormatted = 0
+			listFiles = False
+			listFilesNotFormatted = []
+			circularHeaderDependency = False
+			circularHeaderDependencyFiles = []
+			gnuGplLicence = False
+			gnuGplLicenceFiles = []
+			suspectLicence = False
+			suspectLicenceFiles = []
+			with open('./oai-formatting-check.txt', 'r') as logfile:
+				for line in logfile:
+					ret = re.search('./ci-scripts/checkCodingFormattingRules.sh', str(line))
+					if ret is not None:
+						analyzed = True
+					if analyzed:
+						ret = re.search('Nb Files that do NOT follow OAI rules: (?P<nb_errors>[0-9\.]+)', str(line))
+						if ret is not None:
+							nbFilesNotFormatted = int(ret.group('nb_errors'))
+
+						if re.search('=== Files not properly formatted ===', str(line)) is not None:
+							listFiles = True
+						if listFiles:
+							if re.search('Removing intermediate container', str(line)) is not None:
+								listFiles = False
+							elif re.search('Running in|Files not properly formatted', str(line)) is not None:
+								pass
+							else:
+								listFilesNotFormatted.append(str(line).strip())
+
+						if re.search('=== Files with incorrect define protection ===', str(line)) is not None:
+							circularHeaderDependency = True
+						if circularHeaderDependency:
+							if re.search('Removing intermediate container', str(line)) is not None:
+								circularHeaderDependency = False
+							elif re.search('Running in|Files with incorrect define protection', str(line)) is not None:
+								pass
+							else:
+								circularHeaderDependencyFiles.append(str(line).strip())
+
+						if re.search('=== Files with a GNU GPL licence Banner ===', str(line)) is not None:
+							gnuGplLicence = True
+						if gnuGplLicence:
+							if re.search('Removing intermediate container', str(line)) is not None:
+								gnuGplLicence = False
+							elif re.search('Running in|Files with a GNU GPL licence Banner', str(line)) is not None:
+								pass
+							else:
+								gnuGplLicenceFiles.append(str(line).strip())
+
+						if re.search('=== Files with a suspect Banner ===', str(line)) is not None:
+							suspectLicence = True
+						if suspectLicence:
+							if re.search('Removing intermediate container', str(line)) is not None:
+								suspectLicence = False
+							elif re.search('Running in|Files with a suspect Banner', str(line)) is not None:
+								pass
+							else:
+								suspectLicenceFiles.append(str(line).strip())
+
+				logfile.close()
+			if analyzed:
+				logging.debug('files not formatted properly: ' + str(nbFilesNotFormatted))
+				if nbFilesNotFormatted == 0:
+					HTML.CreateHtmlTestRow('File(s) Format', 'OK', CONST.ALL_PROCESSES_OK)
+				else:
+					html_queue = SimpleQueue()
+					html_cell = '<pre style="background-color:white">\n'
+					html_cell += 'Number of files not following OAI Rules: ' + str(nbFilesNotFormatted) + '\n'
+					for nFile in listFilesNotFormatted:
+						html_cell += str(nFile).strip() + '\n'
+					html_cell += '</pre>'
+					html_queue.put(html_cell)
+					HTML.CreateHtmlTestRowQueue('File(s) Format', 'KO', 1, html_queue)
+					del(html_cell)
+					del(html_queue)
+
+				logging.debug('header files not respecting the circular dependency protection: ' + str(len(circularHeaderDependencyFiles)))
+				if len(circularHeaderDependencyFiles) == 0:
+					HTML.CreateHtmlTestRow('Header Circular Dependency', 'OK', CONST.ALL_PROCESSES_OK)
+				else:
+					html_queue = SimpleQueue()
+					html_cell = '<pre style="background-color:white">\n'
+					html_cell += 'Number of files not respecting: ' + str(len(circularHeaderDependencyFiles)) + '\n'
+					for nFile in circularHeaderDependencyFiles:
+						html_cell += str(nFile).strip() + '\n'
+					html_cell += '</pre>'
+					html_queue.put(html_cell)
+					HTML.CreateHtmlTestRowQueue('Header Circular Dependency', 'KO', 1, html_queue)
+					del(html_cell)
+					del(html_queue)
+					finalStatus = -1
+
+				logging.debug('files with a GNU GPL license: ' + str(len(gnuGplLicenceFiles)))
+				if len(gnuGplLicenceFiles) == 0:
+					HTML.CreateHtmlTestRow('Files w/ GNU GPL License', 'OK', CONST.ALL_PROCESSES_OK)
+				else:
+					html_queue = SimpleQueue()
+					html_cell = '<pre style="background-color:white">\n'
+					html_cell += 'Number of files not respecting: ' + str(len(gnuGplLicenceFiles)) + '\n'
+					for nFile in gnuGplLicenceFiles:
+						html_cell += str(nFile).strip() + '\n'
+					html_cell += '</pre>'
+					html_queue.put(html_cell)
+					HTML.CreateHtmlTestRowQueue('Files w/ GNU GPL License', 'KO', 1, html_queue)
+					del(html_cell)
+					del(html_queue)
+					finalStatus = -1
+
+				logging.debug('files with a suspect license: ' + str(len(suspectLicenceFiles)))
+				if len(suspectLicenceFiles) == 0:
+					HTML.CreateHtmlTestRow('Files with suspect license', 'OK', CONST.ALL_PROCESSES_OK)
+				else:
+					html_queue = SimpleQueue()
+					html_cell = '<pre style="background-color:white">\n'
+					html_cell += 'Number of files not respecting: ' + str(len(suspectLicenceFiles)) + '\n'
+					for nFile in suspectLicenceFiles:
+						html_cell += str(nFile).strip() + '\n'
+					html_cell += '</pre>'
+					html_queue.put(html_cell)
+					HTML.CreateHtmlTestRowQueue('Files with suspect license', 'KO', 1, html_queue)
+					del(html_cell)
+					del(html_queue)
+					finalStatus = -1
+
+			else:
+				finalStatus = -1
+				HTML.htmleNBFailureMsg = 'Could not fully analyze oai-formatting-check.txt file'
+				HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
+		else:
+			finalStatus = -1
+			HTML.htmleNBFailureMsg = 'Could not access oai-formatting-check.txt file'
+			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
+
+		return finalStatus

ci-scripts/conf_files/enb.band38.lte_2x2.100PRB.usrpn310.conf

@@ -237,7 +237,7 @@ RUs = (
          max_pdschReferenceSignalPower = -27;
          max_rxgain                    = 75;
          eNB_instances  = [0];
-         sdr_addrs      = "mgmt_addr=192.168.18.241,addr=192.168.20.2,second_addr=192.168.10.2";
+         sdr_addrs      = "mgmt_addr=172.21.19.13,addr=192.168.20.2,second_addr=192.168.10.2";
 
     }
 );  

ci-scripts/conf_files/enb.band38.lte_2x2_tm2.100PRB.usrpn310.conf

@@ -237,7 +237,7 @@ RUs = (
          max_pdschReferenceSignalPower = -27;
          max_rxgain                    = 75;
          eNB_instances  = [0];
-         sdr_addrs      = "mgmt_addr=192.168.18.241,addr=192.168.20.2,second_addr=192.168.10.2";
+         sdr_addrs      = "mgmt_addr=172.21.19.13,addr=192.168.20.2,second_addr=192.168.10.2";
 
     }
 );  

ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf

@@ -237,7 +237,7 @@ RUs = (
          max_pdschReferenceSignalPower = -27;
          max_rxgain                    = 75;
          eNB_instances  = [0];
-         sdr_addrs      = "mgmt_addr=192.168.18.241,addr=192.168.20.2,second_addr=192.168.10.2";
+         sdr_addrs      = "mgmt_addr=172.21.19.13,addr=192.168.20.2,second_addr=192.168.10.2";
 
     }
 );  

ci-scripts/conf_files/episci/episci_gnb.band78.sa.fr1.106PRB.usrpn310.conf

@@ -239,7 +239,7 @@ RUs = (
          #beamforming 1x4 matrix:
          bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
          #clock_src = "external";
-         sdr_addrs = "mgmt_addr=192.168.18.240,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );
 

ci-scripts/conf_files/episci/proxy_gnb.band78.sa.fr1.106PRB.usrpn310.conf

@@ -240,7 +240,7 @@ RUs = (
          #beamforming 1x4 matrix:
          bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
          #clock_src = "external";
-         sdr_addrs = "mgmt_addr=192.168.18.240,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );
 

ci-scripts/conf_files/gNB_SA_n78_106PRB.2x2_usrpn310.conf

@@ -38,7 +38,7 @@ gNBs =
     ////////// Physical parameters:
 
     ssb_SubcarrierOffset                                      = 0;
-    pdsch_AntennaPorts_N1                                     = 2;
+    pdsch_AntennaPorts_XP                                     = 2;
     pusch_AntennaPorts                                        = 2;
 
     pdcch_ConfigSIB1 = (
@@ -209,9 +209,9 @@ gNBs =
         {
 
            GNB_INTERFACE_NAME_FOR_NG_AMF            = "em1";
-           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.18.194/24";
+           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.127/24";
            GNB_INTERFACE_NAME_FOR_NGU               = "em1";
-           GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.18.194/24";
+           GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.127/24";
            GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
         };
 
@@ -258,7 +258,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
 
-         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );  
 

ci-scripts/conf_files/gNB_SA_n78_133PRB.2x2_usrpn310.conf

@@ -39,7 +39,7 @@ gNBs =
     ////////// Physical parameters:
 
     ssb_SubcarrierOffset                                      = 0;
-    pdsch_AntennaPorts_N1                                     = 2;
+    pdsch_AntennaPorts_XP                                     = 2;
     pusch_AntennaPorts                                        = 2;
 
     pdcch_ConfigSIB1 = (
@@ -206,9 +206,9 @@ gNBs =
         {
 
            GNB_INTERFACE_NAME_FOR_NG_AMF            = "em1";
-           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.18.194/24";
+           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.127/24";
            GNB_INTERFACE_NAME_FOR_NGU               = "em1";
-           GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.18.194/24";
+           GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.127/24";
            GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
         };
 
@@ -254,7 +254,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
 
-         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );  
 

ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf

@@ -225,6 +225,7 @@ RUs = (
          att_tx         = 0;
          att_rx         = 0;
          bands          = [7];
+         sl_ahead       = 12;
          max_pdschReferenceSignalPower = -27;
          max_rxgain                    = 75;
          eNB_instances  = [0];

ci-scripts/conf_files/gnb.band78.nsa_2x2.106PRB.usrpn310.conf

@@ -20,7 +20,7 @@ gNBs =
     ////////// Physical parameters:
 
     ssb_SubcarrierOffset                                      = 31; //0;
-    pdsch_AntennaPorts_N1                                     = 2;
+    pdsch_AntennaPorts_XP                                     = 2;
     pusch_AntennaPorts                                        = 2;
     ul_prbblacklist                                           = "51,52,53,54"
 
@@ -199,12 +199,12 @@ gNBs =
 );
 
 MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-	ulsch_max_frame_inactivity = 1;
-        }  
+{
+  num_cc                     = 1;
+  tr_s_preference            = "local_L1";
+  tr_n_preference            = "local_RRC";
+  ulsch_max_frame_inactivity = 0;
+}
 );
 
 L1s = (
@@ -213,6 +213,7 @@ L1s = (
   tr_n_preference = "local_mac";
   thread_pool_size = 8;
   prach_dtx_threshold = 120;
+  pucch0_dtx_threshold = 80;
 }
 );
 
@@ -230,7 +231,7 @@ RUs = (
          bf_weights = [0x00007fff, 0x00007fff];
          #clock_src = "external";
          sf_extension = 0 
-         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );  
 

ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.2x2.usrpn310.asue.conf

@@ -264,7 +264,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
          sf_extension = 0
-         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );
 

ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.2x2.usrpn310.conf

@@ -38,7 +38,7 @@ gNBs =
     ////////// Physical parameters:
 
     ssb_SubcarrierOffset                                      = 0;
-    pdsch_AntennaPorts_N1                                     = 2;
+    pdsch_AntennaPorts_XP                                     = 2;
     pusch_AntennaPorts                                        = 2;
     ul_prbblacklist                                           = "51,52,53,54"
     do_SRS                                                    = 1;
@@ -261,7 +261,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
          sf_extension = 0
-         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );
 

ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.ddsuu.2x2.usrpn310.conf

@@ -0,0 +1,304 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_CU_ID = 0xe00;
+
+#     cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({
+                  mcc = 208;
+                  mnc = 97;
+                  mnc_length = 2;
+                  snssaiList = (
+                                {
+                                  sst = 1;
+                                  sd  = 0x010203; // 0 false, else true
+                                },
+                                                                                                                                                                   {
+                                  sst = 1;
+                                  sd  = 0x112233; // 0 false, else true
+                                }
+                               );
+                 });
+
+    nr_cellid = 12345678L
+
+#     tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 0;
+    pusch_AntennaPorts                                        = 2;
+    ul_prbblacklist                                           = "51,52,53,54"
+    do_SRS                                                    = 1;
+
+    pdcch_ConfigSIB1 = (
+      {
+        controlResourceSetZero = 11;
+        searchSpaceZero = 0;
+      }
+    );
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3301.68 MHz + 22*12*30e-3 MHz = 3309.6
+      #absoluteFrequencySSB                                          = 620640;
+      # this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
+      absoluteFrequencySSB                                          = 621312;
+      # this is 3503.28 MHz + 22*12*30e-3 MHz = 3511.2
+      #absoluteFrequencySSB                                          = 634080;
+      # this is 3600.48 MHz
+      #absoluteFrequencySSB                                          = 640032;
+      #dl_frequencyBand                                                 = 78;
+      # this is 3301.68 MHz
+      #dl_absoluteFrequencyPointA                                       = 620112;
+      # this is 3300.60 MHz
+      dl_absoluteFrequencyPointA                                       = 620040;
+      # this is 3502.56 MHz
+      #dl_absoluteFrequencyPointA                                       = 633552;
+      # this is 3600.48 MHz
+      #dl_absoluteFrequencyPointA                                       = 640032;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=106 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 11;
+        initialDLBWPsearchSpaceZero                                             = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -104;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 5;
+      nrofDownlinkSlots                                             = 2;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+  ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    ////////// AMF parameters:
+        amf_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+                                  ipv6       = "192:168:30::17";
+                                  active     = "yes";
+                                  preference = "ipv4";
+                                                                                                                              }
+                                                                                                                                          );
+
+        NETWORK_INTERFACES :
+        {
+
+           GNB_INTERFACE_NAME_FOR_NG_AMF            = "em1";
+           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "CI_GNB_IP_ADDR";
+           GNB_INTERFACE_NAME_FOR_NGU               = "em1";
+           GNB_IPV4_ADDRESS_FOR_NGU                 = "CI_GNB_IP_ADDR";
+           GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        };
+
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc           = 1;
+    tr_s_preference  = "local_L1";
+    tr_n_preference  = "local_RRC";
+#    pusch_TargetSNRx10 = 200;
+#    pucch_TargetSNRx10 = 150;
+     ulsch_max_frame_inactivity = 0;
+  }
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+  thread_pool_size = 8;
+  prach_dtx_threshold = 120;
+#  pucch0_dtx_threshold = 150;
+}
+);
+
+RUs = (
+    {
+       local_rf       = "yes"
+         nb_tx          = 2
+         nb_rx          = 2
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [78];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 75;
+         eNB_instances  = [0];
+         ##beamforming 1x2 matrix: 1 layer x 2 antennas
+         bf_weights = [0x00007fff, 0x0000];
+         ##beamforming 1x4 matrix: 1 layer x 4 antennas
+         #bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
+         ## beamforming 2x2 matrix:
+         # bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
+         ## beamforming 4x4 matrix:
+         #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
+         sf_extension = 0
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sl_ahead = 5;
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="info";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+       f1ap_log_level                         ="debug";
+    };

ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.usrpn310.conf

@@ -263,7 +263,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
          sf_extension = 0
-         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );
 

ci-scripts/conf_files/gnb.band78.sa.fr1.162PRB.2x2.usrpn310.conf

@@ -38,7 +38,7 @@ gNBs =
     ////////// Physical parameters:
 
     ssb_SubcarrierOffset                                      = 0;
-    pdsch_AntennaPorts_N1                                     = 2;
+    pdsch_AntennaPorts_XP                                     = 2;
     pusch_AntennaPorts                                        = 2;
     #pusch_TargetSNRx10                                        = 200;
     #pucch_TargetSNRx10                                        = 200;
@@ -262,7 +262,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
          sf_extension = 0
-         sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
     }
 );
 

ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf

@@ -203,7 +203,7 @@ MACRLCs = (
     tr_n_preference     = "local_RRC";
     pusch_TargetSNRx10  = 200;
     pucch_TargetSNRx10  = 200;
-    ulsch_max_frame_inactivity = 1;
+    ulsch_max_frame_inactivity = 0;
   }
 );
 
@@ -221,11 +221,11 @@ RUs = (
     local_rf       = "yes"
     nb_tx          = 1
     nb_rx          = 1
-    att_tx         = 3
-    att_rx         = 0;
+    att_tx         = 12
+    att_rx         = 12;
     bands          = [7];
     max_pdschReferenceSignalPower = -27;
-    max_rxgain     = 111;
+    max_rxgain     = 114;
     eNB_instances  = [0];
 #    sdr_addrs = "serial=30C51D4";
 #    clock_src      = "external";

ci-scripts/conf_files/gnb.sa.band66.fr1.106PRB.usrpn300.conf

@@ -63,8 +63,8 @@ gNBs =
         dl_carrierBandwidth                                            = 106;
      #initialDownlinkBWP
       #genericParameters
-        # this is RBstart=27,L=48 (275*(L-1))+RBstart
-        initialDLBWPlocationAndBandwidth                               = 13475; # 6366 12925 12956 28875 12952
+        # this is RBstart=0,L=106 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875;
 # subcarrierSpacing
 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
         initialDLBWPsubcarrierSpacing                                   = 1;
@@ -85,7 +85,7 @@ gNBs =
       pMax                                                          = 20;
      #initialUplinkBWP
       #genericParameters
-        initialULBWPlocationAndBandwidth                            = 13475;
+        initialULBWPlocationAndBandwidth                            = 28875;
 # subcarrierSpacing
 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
         initialULBWPsubcarrierSpacing                               = 1;

ci-scripts/datalog_rt_stats.default.yaml

@@ -15,7 +15,8 @@ Ref :
   DLSCH encoding : 230.0
   L1 Rx processing : 175.0
   PUSCH inner-receiver : 100.0
-  PUSCH decoding : 180.0 
+  #PUSCH decoding : 180.0
+  PUSCH decoding : 240.0
   DL & UL scheduling timing stats : 37.0
   UL Indication : 38.0
 Threshold :

ci-scripts/docker/Dockerfile.formatting.bionic

@@ -0,0 +1,31 @@
+FROM ubuntu:bionic AS oai-formatting-check
+
+ARG MERGE_REQUEST
+ARG SRC_BRANCH
+ARG TARGET_BRANCH
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update && \
+    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
+    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
+       astyle \
+       gawk \
+       git
+
+WORKDIR /oai-ran
+COPY . .
+
+RUN /bin/bash -c "if [[ -v MERGE_REQUEST ]]; then echo 'Source Branch = $SRC_BRANCH'; echo 'Target Branch = $TARGET_BRANCH'; else echo 'Push to develop'; fi"
+RUN /bin/bash -c "if [[ -v MERGE_REQUEST ]]; then ./ci-scripts/checkCodingFormattingRules.sh --src-branch $SRC_BRANCH --target-branch $TARGET_BRANCH; else ./ci-scripts/checkCodingFormattingRules.sh; fi"
+
+RUN echo "=== Files not properly formatted ===" && \
+    /bin/bash -c "if [[ -f oai_rules_result_list.txt ]]; then cat oai_rules_result_list.txt; fi"
+
+RUN echo "=== Files with incorrect define protection ===" && \
+   /bin/bash -c "if [[ -f header-files-w-incorrect-define.txt ]]; then cat header-files-w-incorrect-define.txt; fi"
+
+RUN echo "=== Files with a GNU GPL licence Banner ===" && \
+   /bin/bash -c "if [[ -f files-w-gnu-gpl-license-banner.txt ]]; then cat files-w-gnu-gpl-license-banner.txt; fi"
+
+RUN echo "=== Files with a suspect Banner ===" && \
+  /bin/bash -c "if [[ -f files-w-suspect-banner.txt ]]; then cat files-w-suspect-banner.txt; fi"

ci-scripts/epc.py

@@ -255,16 +255,19 @@ class EPCManagement():
 			mySSH.command('mkdir -p ' + self.SourceCodePath + '/scripts', '\$', 5)
 			mySSH.command('cd /opt/oai-cn5g-fed-v1.3/docker-compose', '\$', 5)
 			mySSH.command('python3 ./core-network.py '+self.cfgDeploy, '\$', 60)
-			time.sleep(2)
-			mySSH.command('docker-compose -p 5gcn ps -a', '\$', 60)
+			if re.search('start-mini-as-ue', self.cfgDeploy):
+				dFile = 'docker-compose-mini-nrf-asue.yaml'
+			else:
+				dFile = 'docker-compose-mini-nrf.yaml'
+			mySSH.command('docker-compose -p 5gcn -f ' + dFile + ' ps -a', '\$', 60)
 			if mySSH.getBefore().count('Up (healthy)') != 6:
 				logging.error('Not all container healthy')
 			else:
-				logging.debug('OK')
-			mySSH.command('docker-compose config | grep --colour=never image', '\$', 10)
+				logging.debug('OK --> all containers are healthy')
+			mySSH.command('docker-compose -p 5gcn -f ' + dFile + ' config | grep --colour=never image', '\$', 10)
 			listOfImages = mySSH.getBefore()
 			for imageLine in listOfImages.split('\\r\\n'):
-				res1 = re.search('image: (?P<name>[a-zA-Z0-9\-]+):(?P<tag>[a-zA-Z0-9\-]+)', str(imageLine))
+				res1 = re.search('image: (?P<name>[a-zA-Z0-9\-/]+):(?P<tag>[a-zA-Z0-9\-]+)', str(imageLine))
 				res2 = re.search('mysql', str(imageLine))
 				if res1 is not None and res2 is None:
 					html_cell += res1.group('name') + ':' + res1.group('tag') + ' '
@@ -536,7 +539,7 @@ class EPCManagement():
 			mySSH.command('python3 ./core-network.py '+self.cfgUnDeploy, '\$', 60)
 			mySSH.command('docker volume prune --force || true', '\$', 60)
 			time.sleep(2)
-			mySSH.command('tshark -r /tmp/oai-cn5g.pcap | egrep --colour=never "Tracking area update" ','\$', 30)
+			mySSH.command('tshark -r /tmp/oai-cn5g-v1.3.pcap | egrep --colour=never "Tracking area update" ','\$', 30)
 			result = re.search('Tracking area update request', mySSH.getBefore())
 			if result is not None:
 				message = 'UE requested ' + str(mySSH.getBefore().count('Tracking area update request')) + 'Tracking area update request(s)'
@@ -830,8 +833,8 @@ class EPCManagement():
 				mySSH.command('zip mme.log.zip mme_check_run.*', '\$', 60)
 		elif re.match('OAICN5G', self.Type, re.IGNORECASE):
 			mySSH.command('cd ' + self.SourceCodePath + '/logs','\$', 5)
-			mySSH.command('cp -f /tmp/oai-cn5g.pcap .','\$', 30)
-			mySSH.command('zip mme.log.zip oai-amf.log oai-nrf.log oai-cn5g.pcap','\$', 30)
+			mySSH.command('cp -f /tmp/oai-cn5g-v1.3.pcap .','\$', 30)
+			mySSH.command('zip mme.log.zip oai-amf.log oai-nrf.log oai-cn5g*.pcap','\$', 30)
 			mySSH.command('mv mme.log.zip ' + self.SourceCodePath + '/scripts','\$', 30)
 		elif re.match('OAI', self.Type, re.IGNORECASE) or re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE):
 			mySSH.command('zip mme.log.zip mme*.log', '\$', 60)

ci-scripts/flatten_image.py

@@ -0,0 +1,116 @@
+"""
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+   http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-------------------------------------------------------------------------------
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+   contact@openairinterface.org
+"""
+
+import argparse
+import re
+import subprocess
+import sys
+
+def main() -> None:
+    args = _parse_args()
+    status = perform_flattening(args.tag)
+    sys.exit(status)
+
+def _parse_args() -> argparse.Namespace:
+    parser = argparse.ArgumentParser(description='Flattening Image')
+
+    parser.add_argument(
+        '--tag', '-t',
+        action='store',
+        required=True,
+        help='Image Tag in image-name:image tag format',
+    )
+    return parser.parse_args()
+
+def perform_flattening(tag):
+    # First detect which docker/podman command to use
+    cli = ''
+    image_prefix = ''
+    cmd = 'which podman || true'
+    podman_check = subprocess.check_output(cmd, shell=True, universal_newlines=True)
+    if re.search('podman', podman_check.strip()):
+        cli = 'sudo podman'
+        image_prefix = 'localhost/'
+    if cli == '':
+        cmd = 'which docker || true'
+        docker_check = subprocess.check_output(cmd, shell=True, universal_newlines=True)
+        if re.search('docker', docker_check.strip()):
+            cli = 'docker'
+            image_prefix = ''
+    if cli == '':
+        print ('No docker / podman installed: quitting')
+        return -1
+    print (f'Flattening {tag}')
+
+    # Creating a container
+    cmd = cli + ' run --name test-flatten --entrypoint /bin/true -d ' + tag
+    print (cmd)
+    subprocess.check_output(cmd, shell=True, universal_newlines=True)
+
+    # Export / Import trick
+    cmd = cli + ' export test-flatten | ' + cli + ' import '
+    # Bizarro syntax issue with podman
+    if cli == 'docker':
+      cmd += ' --change "ENV PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" '
+    else:
+      cmd += ' --change "ENV PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" '
+    if re.search('oai-enb', tag):
+        cmd += ' --change "WORKDIR /opt/oai-enb" '
+        cmd += ' --change "EXPOSE 2152/udp" '
+        cmd += ' --change "EXPOSE 36412/udp" '
+        cmd += ' --change "EXPOSE 36422/udp" '
+        cmd += ' --change "CMD [\\"/opt/oai-enb/bin/lte-softmodem.Rel15\\", \\"-O\\", \\"/opt/oai-enb/etc/enb.conf\\"]" '
+        cmd += ' --change "ENTRYPOINT [\\"/opt/oai-enb/bin/entrypoint.sh\\"]" '
+    if re.search('oai-gnb', tag):
+        cmd += ' --change "WORKDIR /opt/oai-gnb" '
+        cmd += ' --change "EXPOSE 2152/udp" '
+        cmd += ' --change "EXPOSE 36422/udp" '
+        cmd += ' --change "CMD [\\"/opt/oai-gnb/bin/nr-softmodem.Rel15\\", \\"-O\\", \\"/opt/oai-gnb/etc/gnb.conf\\"]" '
+        cmd += ' --change "ENTRYPOINT [\\"/opt/oai-gnb/bin/entrypoint.sh\\"]" '
+    if re.search('oai-lte-ue', tag):
+        cmd += ' --change "WORKDIR /opt/oai-lte-ue" '
+        cmd += ' --change "CMD [\\"/opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15\\"]" '
+        cmd += ' --change "ENTRYPOINT [\\"/opt/oai-lte-ue/bin/entrypoint.sh\\"]" '
+    if re.search('oai-nr-ue', tag):
+        cmd += ' --change "WORKDIR /opt/oai-nr-ue" '
+        cmd += ' --change "CMD [\\"/opt/oai-nr-ue/bin/nr-uesoftmodem.Rel15\\", \\"-O\\", \\"/opt/oai-nr-ue/etc/nr-ue.conf\\"]" '
+        cmd += ' --change "ENTRYPOINT [\\"/opt/oai-nr-ue/bin/entrypoint.sh\\"]" '
+    if re.search('oai-lte-ru', tag):
+        cmd += ' --change "WORKDIR /opt/oai-lte-ru" '
+        cmd += ' --change "CMD [\\"/opt/oai-lte-ru/bin/oairu.Rel15\\", \\"-O\\", \\"/opt/oai-lte-ru/etc/rru.conf\\"]" '
+        cmd += ' --change "ENTRYPOINT [\\"/opt/oai-lte-ru/bin/entrypoint.sh\\"]" '
+    if re.search('oai-physim', tag):
+        cmd += ' --change "WORKDIR /opt/oai-physim" '
+    cmd += ' - ' + image_prefix + tag
+    print (cmd)
+    subprocess.check_output(cmd, shell=True, universal_newlines=True)
+
+    # Remove container
+    cmd = cli + ' rm -f test-flatten'
+    print (cmd)
+    subprocess.check_output(cmd, shell=True, universal_newlines=True)
+
+    # At this point the original image is a dangling image.
+    # CI pipeline will clean up (`image prune --force`)
+    return 0
+
+if __name__ == '__main__':
+    main()

ci-scripts/main.py

@@ -49,7 +49,7 @@ import cls_physim1          #class PhySim for physical simulators deploy and run
 import sshconnection 
 import epc
 import ran
-import html
+import cls_oai_html
 
 
 #-----------------------------------------------------------
@@ -518,7 +518,7 @@ CiTestObj = cls_oaicitest.OaiCiTest()
 SSH = sshconnection.SSHConnection()
 EPC = epc.EPCManagement()
 RAN = ran.RANManagement()
-HTML = html.HTMLManagement()
+HTML = cls_oai_html.HTMLManagement()
 CONTAINERS = cls_containerize.Containerize()
 SCA = cls_static_code_analysis.StaticCodeAnalysis()
 PHYSIM = cls_physim1.PhySim()
@@ -779,19 +779,19 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re
 	HTML.CreateHtmlTabHeader()
 
 	# On CI bench w/ containers, we need to validate if IP routes are set
-	if EPC.IPAddress == '192.168.18.210':
+	if EPC.IPAddress == '172.21.16.136':
 		CONTAINERS.CheckAndAddRoute('porcepix', EPC.IPAddress, EPC.UserName, EPC.Password)
-	if CONTAINERS.eNBIPAddress == '192.168.18.194':
+	if CONTAINERS.eNBIPAddress == '172.21.16.127':
 		CONTAINERS.CheckAndAddRoute('asterix', CONTAINERS.eNBIPAddress, CONTAINERS.eNBUserName, CONTAINERS.eNBPassword)
-	if CONTAINERS.eNB1IPAddress == '192.168.18.194':
+	if CONTAINERS.eNB1IPAddress == '172.21.16.127':
 		CONTAINERS.CheckAndAddRoute('asterix', CONTAINERS.eNB1IPAddress, CONTAINERS.eNB1UserName, CONTAINERS.eNB1Password)
-	if CONTAINERS.eNBIPAddress == '192.168.18.193':
+	if CONTAINERS.eNBIPAddress == '172.21.16.128':
 		CONTAINERS.CheckAndAddRoute('obelix', CONTAINERS.eNBIPAddress, CONTAINERS.eNBUserName, CONTAINERS.eNBPassword)
-	if CONTAINERS.eNB1IPAddress == '192.168.18.193':
+	if CONTAINERS.eNB1IPAddress == '172.21.16.128':
 		CONTAINERS.CheckAndAddRoute('obelix', CONTAINERS.eNB1IPAddress, CONTAINERS.eNB1UserName, CONTAINERS.eNB1Password)
-	if CONTAINERS.eNBIPAddress == '192.168.18.209':
+	if CONTAINERS.eNBIPAddress == '172.21.16.137':
 		CONTAINERS.CheckAndAddRoute('nepes', CONTAINERS.eNBIPAddress, CONTAINERS.eNBUserName, CONTAINERS.eNBPassword)
-	if CONTAINERS.eNB1IPAddress == '192.168.18.209':
+	if CONTAINERS.eNB1IPAddress == '172.21.16.137':
 		CONTAINERS.CheckAndAddRoute('nepes', CONTAINERS.eNB1IPAddress, CONTAINERS.eNB1UserName, CONTAINERS.eNB1Password)
 
 	CiTestObj.FailReportCnt = 0
@@ -799,7 +799,7 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re
 	HTML.startTime=int(round(time.time() * 1000))
 	while CiTestObj.FailReportCnt < CiTestObj.repeatCounts[0] and RAN.prematureExit:
 		RAN.prematureExit=False
-		# At every iteratin of the retry loop, a separator will be added
+		# At every iteration of the retry loop, a separator will be added
 		# pass CiTestObj.FailReportCnt as parameter of HTML.CreateHtmlRetrySeparator
 		HTML.CreateHtmlRetrySeparator(CiTestObj.FailReportCnt)
 		for test_case_id in todo_tests:
@@ -923,6 +923,10 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re
 					CONTAINERS.UndeployObject(HTML, RAN)
 				elif action == 'Cppcheck_Analysis':
 					SCA.CppCheckAnalysis(HTML)
+				elif action == 'LicenceAndFormattingCheck':
+					ret = SCA.LicenceAndFormattingCheck(HTML)
+					if ret != 0:
+						RAN.prematureExit = True
 				elif action == 'Deploy_Run_PhySim':
 					PHYSIM.Deploy_PhySim(HTML, RAN)
 				elif action == 'DeployGenObject':

ci-scripts/provideUniqueImageTag.py

@@ -5,15 +5,15 @@ import subprocess
 import sys
 
 AUTH_SERVICE = 'registry.docker.io'
-AUTH_SCOPE   = 'repository:rdefosseoai/oai-enb:pull'
+AUTH_SCOPE   = 'repository:oaisoftwarealliance/oai-enb:pull'
 
 def main() -> None:
     args = _parse_args()
 
-    cmd = 'curl -fsSL "https://auth.docker.io/token?service=' + AUTH_SERVICE + '&scope=' + AUTH_SCOPE + '" | jq --raw-output ".token"'
+    cmd = 'curl -fsSL "https://auth.docker.io/token?service=' + AUTH_SERVICE + '&scope=' + AUTH_SCOPE + '" 2>/dev/null | jq --raw-output ".token"'
     token = subprocess.check_output(cmd, shell=True, universal_newlines=True)
     token = str(token).strip()
-    cmd = 'curl -fsSL -H "Authorization: Bearer ' + token + '" "https://index.docker.io/v2/rdefosseoai/oai-enb/tags/list" | jq .'
+    cmd = 'curl -fsSL -H "Authorization: Bearer ' + token + '" "https://index.docker.io/v2/oaisoftwarealliance/oai-enb/tags/list" 2>/dev/null | jq .'
     listOfTags = subprocess.check_output(cmd, shell=True, universal_newlines=True)
 
     foundTag = False

ci-scripts/ran.py

@@ -372,36 +372,30 @@ class RANManagement():
 			else:
 				pcapfile_prefix="gnb_"
 			mySSH.open(lIpAddr, lUserName, lPassWord)
-			mySSH.command('ip addr show | awk -f /tmp/active_net_interfaces.awk | egrep -v "lo|tun"', '\$', 5)
-			result = re.search('interfaceToUse=(?P<eth_interface>[a-zA-Z0-9\-\_]+)done', mySSH.getBefore())
-			if result is not None:
-				eth_interface = result.group('eth_interface')
-				fltr = 'port 38412 or port 36412 or port 36422' # NGAP, S1AP, X2AP
-				logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + ' with filter "' + fltr + '"\u001B[0m')
-				pcapfile = pcapfile_prefix + self.testCase_id + '_log.pcap'
-				mySSH.command('echo ' + lPassWord + ' | sudo -S rm -f /tmp/' + pcapfile , '\$', 5)
-				mySSH.command('echo $USER; nohup sudo -E tshark  -i ' + eth_interface + ' -f "' + fltr + '" -w /tmp/' + pcapfile + ' > /dev/null 2>&1 &','\$', 5)
+			eth_interface = 'any'
+			fltr = 'sctp'
+			logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + ' with filter "' + fltr + '"\u001B[0m')
+			pcapfile = pcapfile_prefix + self.testCase_id + '_log.pcap'
+			mySSH.command('echo ' + lPassWord + ' | sudo -S rm -f /tmp/' + pcapfile , '\$', 5)
+			mySSH.command('echo $USER; nohup sudo -E tshark  -i ' + eth_interface + ' -f "' + fltr + '" -w /tmp/' + pcapfile + ' > /dev/null 2>&1 &','\$', 5)
 			mySSH.close()
 			
 
 
 		# If tracer options is on, running tshark on EPC side and capture traffic b/ EPC and eNB
-		result = re.search('T_stdout', str(self.Initialize_eNB_args))
-		if (result is not None):
+		if EPC.IPAddress != "none":
 			localEpcIpAddr = EPC.IPAddress
 			localEpcUserName = EPC.UserName
 			localEpcPassword = EPC.Password
 			mySSH.open(localEpcIpAddr, localEpcUserName, localEpcPassword)
-			mySSH.command('ip addr show | awk -f /tmp/active_net_interfaces.awk | egrep -v "lo|tun"', '\$', 5)
-			result = re.search('interfaceToUse=(?P<eth_interface>[a-zA-Z0-9\-\_]+)done', mySSH.getBefore())
-			if result is not None:
-				eth_interface = result.group('eth_interface')
-				fltr = 'port 38412 or port 36412 or port 36422' # NGAP, S1AP, X2AP
-				logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + ' with filter "' + fltr + '"\u001B[0m')
-				self.epcPcapFile = 'enb_' + self.testCase_id + '_s1log.pcap'
-				mySSH.command('echo ' + localEpcPassword + ' | sudo -S rm -f /tmp/' + self.epcPcapFile , '\$', 5)
-				mySSH.command('echo $USER; nohup sudo tshark -f "host ' + lIpAddr +'" -i ' + eth_interface + ' -f "' + fltr + '" -w /tmp/' + self.epcPcapFile + ' > /tmp/tshark.log 2>&1 &', localEpcUserName, 5)
+			eth_interface = 'any'
+			fltr = 'sctp'
+			logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + ' with filter "' + fltr + '"\u001B[0m')
+			self.epcPcapFile = 'enb_' + self.testCase_id + '_s1log.pcap'
+			mySSH.command('echo ' + localEpcPassword + ' | sudo -S rm -f /tmp/' + self.epcPcapFile , '\$', 5)
+			mySSH.command('echo $USER; nohup sudo tshark -f "host ' + lIpAddr +'" -i ' + eth_interface + ' -f "' + fltr + '" -w /tmp/' + self.epcPcapFile + ' > /tmp/tshark.log 2>&1 &', localEpcUserName, 5)
 			mySSH.close()
+
 		mySSH.open(lIpAddr, lUserName, lPassWord)
 		mySSH.command('cd ' + lSourcePath, '\$', 5)
 		# Initialize_eNB_args usually start with -O and followed by the location in repository
@@ -519,23 +513,19 @@ class RANManagement():
 				logging.error('\u001B[1;37;41m eNB/gNB/ocp-eNB logging system did not show got sync! \u001B[0m')
 				HTML.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' -O ' + config_file + extra_options, 'KO', CONST.ALL_PROCESSES_OK)
 				# In case of T tracer recording, we need to kill tshark on EPC side
-				result = re.search('T_stdout', str(self.Initialize_eNB_args))
-				if (result is not None):
-					localEpcIpAddr = EPC.IPAddress
-					localEpcUserName = EPC.UserName
-					localEpcPassword = EPC.Password
-					mySSH.open(localEpcIpAddr, localEpcUserName, localEpcPassword)
-					logging.debug('\u001B[1m Stopping tshark \u001B[0m')
-					mySSH.command('echo ' + localEpcPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
-					if self.epcPcapFile  != '':
-						time.sleep(0.5)
-						mySSH.command('echo ' + localEpcPassword + ' | sudo -S chmod 666 /tmp/' + self.epcPcapFile, '\$', 5)
-					mySSH.close()
-					time.sleep(1)
-					if self.epcPcapFile != '':
-						copyin_res = mySSH.copyin(localEpcIpAddr, localEpcUserName, localEpcPassword, '/tmp/' + self.epcPcapFile, '.')
-						if (copyin_res == 0):
-							mySSH.copyout(lIpAddr, lUserName, lPassWord, self.epcPcapFile, lSourcePath + '/cmake_targets/.')
+				localEpcIpAddr = EPC.IPAddress
+				localEpcUserName = EPC.UserName
+				localEpcPassword = EPC.Password
+				mySSH.open(localEpcIpAddr, localEpcUserName, localEpcPassword)
+				logging.debug('\u001B[1m Stopping tshark \u001B[0m')
+				mySSH.command('echo ' + localEpcPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
+				if self.epcPcapFile  != '':
+					mySSH.command('echo ' + localEpcPassword + ' | sudo -S chmod 666 /tmp/' + self.epcPcapFile, '\$', 5)
+				mySSH.close()
+				if self.epcPcapFile != '':
+					copyin_res = mySSH.copyin(localEpcIpAddr, localEpcUserName, localEpcPassword, '/tmp/' + self.epcPcapFile, '.')
+					if (copyin_res == 0):
+						mySSH.copyout(lIpAddr, lUserName, lPassWord, self.epcPcapFile, lSourcePath + '/cmake_targets/.')
 				self.prematureExit = True
 				return
 			else:

ci-scripts/ran_dashboard/Hdashboard.py

@@ -528,15 +528,15 @@ class Dashboard:
             editable_mr = project.mergerequests.get(int(mr))
             mr_notes = editable_mr.notes.list(all=True)
 
-            body = '<a href="https://oaitestdashboard.s3.eu-west-1.amazonaws.com/MR'+mr+'/index.html">Consolidated Test Results</a><br>'+\
-                'Tested CommitID: ' + commit + '<br>'
+            body =  '[Consolidated Test Results](https://oaitestdashboard.s3.eu-west-1.amazonaws.com/MR'+mr+'/index.html)\\\n'
+            body += 'Tested CommitID: ' + commit + '\\\n'
 
             for i in range(0,n_tests):
                 jobname = args[4*i]
                 buildurl = args[4*i+1]
                 buildid = args[4*i+2]
                 status = args[4*i+3]
-                body += jobname+', status is <b>'+status+'</b>, (<a href="'+buildurl+'">'+buildid+'</a>)<br>'
+                body += jobname+': **'+status+'** ([' + buildid + '](' + buildurl + '))\\\n'
 
             #create new note
             mr_note = editable_mr.notes.create({

ci-scripts/xml_class_list.yml

@@ -47,3 +47,4 @@
   - PingFromContainer
   - IperfFromContainer
   - StatsFromGenObject
+  - LicenceAndFormattingCheck

ci-scripts/xml_files/container_5g_fdd_rfsim.xml

@@ -33,12 +33,10 @@
  000013
  020011
  020012
- 100011
-        </TestCaseRequestedList>
-<!-- Not done yet because of code instability
  030011
  030012
--->
+ 100011
+        </TestCaseRequestedList>
         <TestCaseExclusionList></TestCaseExclusionList>
 
         <testCase id="000010">
@@ -104,7 +102,7 @@
                 <server_container_name>rfsim5g-oai-ext-dn</server_container_name>
                 <client_container_name>rfsim5g-oai-nr-ue</client_container_name>
                 <server_options>-u -i 1 -s</server_options>
-                <client_options>-B 12.1.1.2 -c 192.168.72.135 -u -i 1 -t 30 -b 1M</client_options>
+                <client_options>-B 12.1.1.2 -c 192.168.72.135 -u -i 1 -t 30 -b 3M</client_options>
         </testCase>
 
         <testCase id="100011">

ci-scripts/xml_files/container_nsa_b200_quectel.xml

@@ -138,19 +138,19 @@
 
 	<testCase id="070000">
 		<class>Iperf</class>
-		<desc>iperf (DL/40Mbps/UDP)(60 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 40M -t 60 -i 1 -fm</iperf_args>
+		<desc>iperf (DL/125Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 125M -t 60 -i 1 -fm</iperf_args>
 		<direction>DL</direction>
 		<id>idefix</id>
-		<iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-		<iperf_bitrate_threshold>85</iperf_bitrate_threshold>
+		<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
+		<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
 		<iperf_profile>single-ue</iperf_profile>
 	</testCase>
 
 	<testCase id="070001">
 		<class>Iperf</class>
-		<desc>iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 3M -t 60 -i 1 -fm</iperf_args>
+		<desc>iperf (UL/8Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 8M -t 60 -i 1 -fm</iperf_args>
 		<direction>UL</direction>
 		<id>idefix</id>
 		<iperf_packetloss_threshold>1</iperf_packetloss_threshold>

ci-scripts/xml_files/formatting_check.xml

@@ -0,0 +1,37 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>formatting-tab</htmlTabRef>
+	<htmlTabName>License and Formatting Checks</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000002
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000002">
+		<class>LicenceAndFormattingCheck</class>
+		<desc>License and Formatting Checks</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml

@@ -68,7 +68,7 @@
 		<air_interface>lte</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
-		<USRP_IPAddress>192.168.18.241</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.13</USRP_IPAddress>
 	</testCase>
 
 
@@ -81,7 +81,7 @@
 		<air_interface>nr</air_interface>
 		<eNB_Stats>yes</eNB_Stats>
 		<rt_stats_cfg>datalog_rt_stats.2x2.yaml</rt_stats_cfg>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">
@@ -115,11 +115,12 @@
 
 	<testCase id="070000">
 		<class>Iperf</class>
-		<desc>iperf (DL/60Mbps/UDP)(60 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 60M -t 60</iperf_args>
+		<desc>iperf (DL/125Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 125M -t 60</iperf_args>
 		<direction>DL</direction>
 		<id>nrmodule2_quectel</id>
-		<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
+		<iperf_packetloss_threshold>15</iperf_packetloss_threshold>
+		<iperf_bitrate_threshold>85</iperf_bitrate_threshold>
 		<iperf_profile>single-ue</iperf_profile>
 	</testCase>
 

ci-scripts/xml_files/fr1_nsa_2x2_quectel_attach_detach.xml

@@ -87,7 +87,7 @@
 		<air_interface>lte</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
-		<USRP_IPAddress>192.168.18.241</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.13</USRP_IPAddress>
 	</testCase>
 
 
@@ -100,7 +100,7 @@
 		<air_interface>nr</air_interface>
 		<eNB_Stats>yes</eNB_Stats>
 		<rt_stats_cfg>datalog_rt_stats.2x2.yaml</rt_stats_cfg>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">

ci-scripts/xml_files/fr1_nsa_quectel.xml

@@ -34,8 +34,8 @@
  050000
  050001
  000001
- 070003
- 070002
+ 070000
+ 070001
  000001
  050000
  050001
@@ -52,14 +52,12 @@
 		<UE_Trace>yes</UE_Trace>
 	</testCase>
 
-
 	<testCase id="010002">
 		<class>Terminate_UE</class>
 		<desc>Terminate Quectel</desc>
 		<id>idefix</id>
 	</testCase>
 
-
 	<testCase id="030000">
 		<class>Initialize_eNB</class>
 		<desc>Initialize eNB</desc>
@@ -70,11 +68,10 @@
 		<eNB_Trace>yes</eNB_Trace>
 	</testCase>
 
-
 	<testCase id="040000">
 		<class>Initialize_eNB</class>
 		<desc>Initialize gNB</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf -E -q --RUs.[0].sdr_addrs "serial=30C51D4" --log_config.global_log_options level,nocolor,time,line_num,function</Initialize_eNB_args>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf -E -q --RUs.[0].sdr_addrs "serial=30C51D4" --continuous-tx --log_config.global_log_options level,nocolor,time,line_num,function</Initialize_eNB_args>
 		<eNB_instance>1</eNB_instance>
 		<eNB_serverId>1</eNB_serverId>
 		<air_interface>nr</air_interface>
@@ -92,7 +89,6 @@
 		<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
 	</testCase>
 
-
 	<testCase id="050000">
 		<class>Ping</class>
 		<desc>Ping: 20pings in 20sec</desc>
@@ -113,41 +109,19 @@
 
 	<testCase id="070000">
 		<class>Iperf</class>
-		<desc>iperf (DL/30Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 30M -t 30</iperf_args>
+		<desc>iperf (DL/125Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 125M -t 60</iperf_args>
 		<direction>DL</direction>
 		<id>idefix</id>
-		<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-		<iperf_bitrate_threshold>95</iperf_bitrate_threshold>
+		<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
+		<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
 		<iperf_profile>single-ue</iperf_profile>
 	</testCase>
 
 	<testCase id="070001">
 		<class>Iperf</class>
-		<desc>iperf (DL/40Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 40M -t 30</iperf_args>
-		<direction>DL</direction>
-		<id>idefix</id>
-		<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-		<iperf_bitrate_threshold>95</iperf_bitrate_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="070002">
-		<class>Iperf</class>
-		<desc>iperf (DL/60Mbps/UDP)(60 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 60M -t 60</iperf_args>
-		<direction>DL</direction>
-		<id>idefix</id>
-		<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-		<iperf_bitrate_threshold>95</iperf_bitrate_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="070003">
-		<class>Iperf</class>
-		<desc>iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 3M -t 60</iperf_args>
+		<desc>iperf (UL/8Mbps/UDP)(60 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 8M -t 60</iperf_args>
 		<direction>UL</direction>
 		<id>idefix</id>
 		<iperf_packetloss_threshold>1</iperf_packetloss_threshold>
@@ -155,7 +129,6 @@
 		<iperf_profile>single-ue</iperf_profile>
 	</testCase>
 
-
 	<testCase id="080000">
 		<class>Terminate_eNB</class>
 		<desc>Terminate eNB</desc>

ci-scripts/xml_files/fr1_sa_amarisoft_ue_1x.xml

@@ -52,7 +52,7 @@
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
 		<rt_stats_cfg>datalog_rt_stats.2x2.yaml</rt_stats_cfg>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="050000">

ci-scripts/xml_files/fr1_sa_oaiue_b200.xml

@@ -60,7 +60,7 @@
 		<air_interface>nr</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">

ci-scripts/xml_files/fr1_sa_oaiue_n310.xml

@@ -42,7 +42,7 @@
 		<class>Initialize_OAI_UE</class>
 		<desc>Initialize OAI UE (N310)</desc>
 		<air_interface>nr</air_interface>
-		<Initialize_OAI_UE_args>--sa -O ../../../ci-scripts/conf_files/ue.sa.conf --usrp-args "mgmt_addr=192.168.18.241,addr=192.168.10.2"  --numerology 1 -r 106 --band 78 -C 3319680000 --nokrnmod 1 --ue-txgain 0 --ue-rxgain 70 --ue-fo-compensation --log_config.global_log_options level,nocolor,time</Initialize_OAI_UE_args>
+		<Initialize_OAI_UE_args>--sa -O ../../../ci-scripts/conf_files/ue.sa.conf --usrp-args "mgmt_addr=172.21.19.13,addr=192.168.10.2"  --numerology 1 -r 106 --band 78 -C 3319680000 --nokrnmod 1 --ue-txgain 0 --ue-rxgain 70 --ue-fo-compensation --log_config.global_log_options level,nocolor,time</Initialize_OAI_UE_args>
 	</testCase>
 
 	<testCase id="010002">
@@ -60,7 +60,7 @@
 		<air_interface>nr</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">

ci-scripts/xml_files/fr1_sa_oaiue_x300.xml

@@ -60,7 +60,7 @@
 		<air_interface>nr</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">

ci-scripts/xml_files/fr1_sa_quectel.xml

@@ -22,7 +22,7 @@
 -->
 <testCaseList>
 	<htmlTabRef>TEST-SA-FR1-Tab1</htmlTabRef>
-	<htmlTabName>SA Ping DL UL with QUECTEL</htmlTabName>
+	<htmlTabName>SA Ping DL UL with Quectel, 2.5ms TDD</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<repeatCount>1</repeatCount>
 	<TestCaseRequestedList>
@@ -63,14 +63,14 @@
 	<testCase id="040000">
 		<class>Initialize_eNB</class>
 		<desc>Initialize gNB</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.2x2.usrpn310.conf --sa -q --usrp-tx-thread-config 1 --T_stdout 2 --log_config.global_log_options level,nocolor,time</Initialize_eNB_args>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.ddsuu.2x2.usrpn310.conf --sa -q --usrp-tx-thread-config 1 --T_stdout 2 --log_config.global_log_options level,nocolor,time</Initialize_eNB_args>
 		<eNB_instance>0</eNB_instance>
 		<eNB_serverId>0</eNB_serverId>
 		<air_interface>nr</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
 		<rt_stats_cfg>datalog_rt_stats.2x2.yaml</rt_stats_cfg>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">
@@ -92,7 +92,7 @@
 		<id>nrmodule2_quectel</id>
 		<ping_args>-c 40</ping_args>
 		<ping_packetloss_threshold>1</ping_packetloss_threshold>
-		<ping_rttavg_threshold>20</ping_rttavg_threshold>
+		<ping_rttavg_threshold>10</ping_rttavg_threshold>
 	</testCase>
 
 	<testCase id="050001">
@@ -101,7 +101,7 @@
 		<id>nrmodule2_quectel</id>
 		<ping_args>-c 100 -i 0,2</ping_args>
 		<ping_packetloss_threshold>1</ping_packetloss_threshold>
-		<ping_rttavg_threshold>20</ping_rttavg_threshold>
+		<ping_rttavg_threshold>10</ping_rttavg_threshold>
 	</testCase>
 
 	<testCase id="070000">

ci-scripts/xml_files/fr1_sa_quectel_162prb.xml

@@ -68,7 +68,7 @@
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
 		<rt_stats_cfg>datalog_rt_stats.2x2.yaml</rt_stats_cfg>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">

ci-scripts/xml_files/fr1_sa_quectel_stages.xml

@@ -74,7 +74,7 @@
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
 		<rt_stats_cfg>datalog_rt_stats.2x2.yaml</rt_stats_cfg>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">

ci-scripts/xml_files/fr1_sa_quectel_stages_162prb.xml

@@ -74,7 +74,7 @@
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
 		<rt_stats_cfg>datalog_rt_stats.2x2.yaml</rt_stats_cfg>
-		<USRP_IPAddress>192.168.18.252</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.14</USRP_IPAddress>
 	</testCase>
 
 	<testCase id="000001">

ci-scripts/xml_files/gnb_phytest_usrp_run.xml

@@ -24,7 +24,7 @@
 	<htmlTabRef>gNB-PHY-Test</htmlTabRef>
 	<htmlTabName>Run-gNB-PHY-Test</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>3</repeatCount>
+	<repeatCount>1</repeatCount>
 	<TestCaseRequestedList>
 090101 000001 090109
 	</TestCaseRequestedList>
@@ -33,7 +33,7 @@
 	<testCase id="090101">
 		<class>Initialize_eNB</class>
 		<desc>Initialize gNB USRP</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf --phy-test -q -U 787200 -T 106 -t 28 -D 130175 -m 28 -M 106 --log_config.global_log_options level,nocolor,time</Initialize_eNB_args>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf --phy-test -q -U 787200 -T 106 -t 28 -D 130175 -m 28 -M 106 --usrp-tx-thread-config 1 --log_config.global_log_options level,nocolor,time</Initialize_eNB_args>
 		<air_interface>NR</air_interface>
 		<USRP_IPAddress>192.168.20.2</USRP_IPAddress>
 	</testCase>

ci-scripts/xml_files/lte_2x2_tm1_quectel.xml

@@ -65,7 +65,7 @@
 		<air_interface>lte</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
-		<USRP_IPAddress>192.168.18.241</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.13</USRP_IPAddress>
 	</testCase>
 
 

ci-scripts/xml_files/lte_2x2_tm2_quectel.xml

@@ -65,7 +65,7 @@
 		<air_interface>lte</air_interface>
 		<eNB_Trace>yes</eNB_Trace>
 		<eNB_Stats>yes</eNB_Stats>
-		<USRP_IPAddress>192.168.18.241</USRP_IPAddress>
+		<USRP_IPAddress>172.21.19.13</USRP_IPAddress>
 	</testCase>
 
 

ci-scripts/yaml_files/4g_rfsimulator_fdd_05MHz/README.md

@@ -31,9 +31,7 @@ This page is only valid for an `Ubuntu18` host.
 
 # 1. Retrieving the images on Docker-Hub #
 
-Currently the images are hosted under the user account `rdefosseoai`.
-
-This may change in the future.
+Currently the images are hosted under the team account `oaisoftwarealliance`. They were previously hosted under the user account `rdefosseoai`.
 
 Once again you may need to log on [docker-hub](https://hub.docker.com/) if your organization has reached pulling limit as `anonymous`.
 
@@ -49,13 +47,13 @@ Now pull images.
 ```bash
 $ docker pull cassandra:2.1
 $ docker pull redis:6.0.5
-$ docker pull rdefosseoai/oai-hss:latest
-$ docker pull rdefosseoai/magma-mme:latest
-$ docker pull rdefosseoai/oai-spgwc:latest
-$ docker pull rdefosseoai/oai-spgwu-tiny:latest
+$ docker pull oaisoftwarealliance/oai-hss:latest
+$ docker pull oaisoftwarealliance/magma-mme:latest
+$ docker pull oaisoftwarealliance/oai-spgwc:latest
+$ docker pull oaisoftwarealliance/oai-spgwu-tiny:latest
 
-$ docker pull rdefosseoai/oai-enb:develop
-$ docker pull rdefosseoai/oai-lte-ue:develop
+$ docker pull oaisoftwarealliance/oai-enb:develop
+$ docker pull oaisoftwarealliance/oai-lte-ue:develop
 ```
 
 If the `redis` tag is not available, pick the newest available `6.0.x` tag at [Docker Hub Redis Tags](https://hub.docker.com/_/redis?tab=tags).
@@ -63,13 +61,13 @@ If the `redis` tag is not available, pick the newest available `6.0.x` tag at [D
 And **re-tag** them for tutorials' docker-compose file to work.
 
 ```bash
-$ docker image tag rdefosseoai/oai-spgwc:latest oai-spgwc:latest
-$ docker image tag rdefosseoai/oai-hss:latest oai-hss:latest
-$ docker image tag rdefosseoai/oai-spgwu-tiny:latest oai-spgwu-tiny:latest 
-$ docker image tag rdefosseoai/magma-mme:latest magma-mme:latest
+$ docker image tag oaisoftwarealliance/oai-spgwc:latest oai-spgwc:latest
+$ docker image tag oaisoftwarealliance/oai-hss:latest oai-hss:latest
+$ docker image tag oaisoftwarealliance/oai-spgwu-tiny:latest oai-spgwu-tiny:latest 
+$ docker image tag oaisoftwarealliance/magma-mme:latest magma-mme:latest
 
-$ docker image tag rdefosseoai/oai-enb:develop oai-enb:develop
-$ docker image tag rdefosseoai/oai-lte-ue:develop oai-lte-ue:develop
+$ docker image tag oaisoftwarealliance/oai-enb:develop oai-enb:develop
+$ docker image tag oaisoftwarealliance/oai-lte-ue:develop oai-lte-ue:develop
 ```
 
 ```bash
@@ -505,7 +503,7 @@ In my traffic test, I was able to ping outside of my local network.
 in SPGW-C config:
 
 ```yaml
-            DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS: 172.21.3.100
             DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4
             PUSH_PROTOCOL_OPTION: 'true'
 ```

ci-scripts/yaml_files/4g_rfsimulator_fdd_05MHz/docker-compose.yml

@@ -115,7 +115,7 @@ services:
             TZ: Europe/Paris
             SGW_INTERFACE_NAME_FOR_S11: eth0
             PGW_INTERFACE_NAME_FOR_SX: eth0
-            DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS: 172.21.3.100
             DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4
             PUSH_PROTOCOL_OPTION: 'true'
             APN_NI_1: oai.ipv4

ci-scripts/yaml_files/4g_rfsimulator_fdd_10MHz/docker-compose.yml

@@ -115,7 +115,7 @@ services:
             TZ: Europe/Paris
             SGW_INTERFACE_NAME_FOR_S11: eth0
             PGW_INTERFACE_NAME_FOR_SX: eth0
-            DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS: 172.21.3.100
             DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4
             PUSH_PROTOCOL_OPTION: 'true'
             APN_NI_1: oai.ipv4

ci-scripts/yaml_files/4g_rfsimulator_fdd_20MHz/docker-compose.yml

@@ -115,7 +115,7 @@ services:
             TZ: Europe/Paris
             SGW_INTERFACE_NAME_FOR_S11: eth0
             PGW_INTERFACE_NAME_FOR_SX: eth0
-            DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS: 172.21.3.100
             DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4
             PUSH_PROTOCOL_OPTION: 'true'
             APN_NI_1: oai.ipv4

ci-scripts/yaml_files/4g_rfsimulator_tdd_05MHz/docker-compose.yml

@@ -115,7 +115,7 @@ services:
             TZ: Europe/Paris
             SGW_INTERFACE_NAME_FOR_S11: eth0
             PGW_INTERFACE_NAME_FOR_SX: eth0
-            DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS: 172.21.3.100
             DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4
             PUSH_PROTOCOL_OPTION: 'true'
             APN_NI_1: oai.ipv4

ci-scripts/yaml_files/5g_f1_rfsimulator/docker-compose.yaml

@@ -120,7 +120,7 @@ services:
             - SMF_INTERFACE_PORT_FOR_SBI=80
             - SMF_INTERFACE_HTTP2_PORT_FOR_SBI=9090
             - SMF_API_VERSION=v1
-            - DEFAULT_DNS_IPV4_ADDRESS=192.168.18.129
+            - DEFAULT_DNS_IPV4_ADDRESS=172.21.3.100
             - DEFAULT_DNS_SEC_IPV4_ADDRESS=4.4.4.4
             - AMF_IPV4_ADDRESS=0.0.0.0
             - AMF_PORT=80

ci-scripts/yaml_files/5g_fdd_rfsimulator/docker-compose.yaml

@@ -120,7 +120,7 @@ services:
             - SMF_INTERFACE_PORT_FOR_SBI=80
             - SMF_INTERFACE_HTTP2_PORT_FOR_SBI=9090
             - SMF_API_VERSION=v1
-            - DEFAULT_DNS_IPV4_ADDRESS=192.168.18.129
+            - DEFAULT_DNS_IPV4_ADDRESS=172.21.3.100
             - DEFAULT_DNS_SEC_IPV4_ADDRESS=4.4.4.4
             - AMF_IPV4_ADDRESS=0.0.0.0
             - AMF_PORT=80

ci-scripts/yaml_files/5g_l2sim_tdd/README.md

@@ -18,9 +18,7 @@ This tutorial is only valid once this file is merged into the `develop` branch.
 
 # 1. Retrieving the images on Docker-Hub #
 
-Currently the images are hosted under the user account `rdefosseoai`.
-
-This may change in the future.
+Currently the images are hosted under the team account `oaisoftwarealliance`. They were previously hosted under the user account `rdefosseoai`.
 
 Once again you may need to log on [docker-hub](https://hub.docker.com/) if your organization has reached pulling limit as `anonymous`.
 
@@ -35,27 +33,27 @@ Now pull images.
 
 ```bash
 $ docker pull mysql:5.7
-$ docker pull rdefosseoai/oai-amf:latest
-$ docker pull rdefosseoai/oai-nrf:latest
-$ docker pull rdefosseoai/oai-smf:latest
-$ docker pull rdefosseoai/oai-spgwu-tiny:latest
+$ docker pull oaisoftwarealliance/oai-amf:latest
+$ docker pull oaisoftwarealliance/oai-nrf:latest
+$ docker pull oaisoftwarealliance/oai-smf:latest
+$ docker pull oaisoftwarealliance/oai-spgwu-tiny:latest
 
-$ docker pull rdefosseoai/oai-gnb:develop
-$ docker pull rdefosseoai/oai-nr-ue:develop
-$ docker pull rdefosseoai/proxy:latest
+$ docker pull oaisoftwarealliance/oai-gnb:develop
+$ docker pull oaisoftwarealliance/oai-nr-ue:develop
+$ docker pull oaisoftwarealliance/proxy:latest
 ```
 
 And **re-tag** them for tutorials' docker-compose file to work.
 
 ```bash
-$ docker image tag rdefosseoai/oai-amf:latest oai-amf:latest
-$ docker image tag rdefosseoai/oai-nrf:latest oai-nrf:latest
-$ docker image tag rdefosseoai/oai-smf:latest oai-smf:latest
-$ docker image tag rdefosseoai/oai-spgwu-tiny:latest oai-spgwu-tiny:latest
+$ docker image tag oaisoftwarealliance/oai-amf:latest oai-amf:latest
+$ docker image tag oaisoftwarealliance/oai-nrf:latest oai-nrf:latest
+$ docker image tag oaisoftwarealliance/oai-smf:latest oai-smf:latest
+$ docker image tag oaisoftwarealliance/oai-spgwu-tiny:latest oai-spgwu-tiny:latest
 
-$ docker image tag rdefosseoai/oai-gnb:develop oai-gnb:develop
-$ docker image tag rdefosseoai/oai-nr-ue:develop oai-nr-ue:develop
-$ docker image tag rdefosseoai/proxy:latest oai-lte-multi-ue-proxy:latest
+$ docker image tag oaisoftwarealliance/oai-gnb:develop oai-gnb:develop
+$ docker image tag oaisoftwarealliance/oai-nr-ue:develop oai-nr-ue:develop
+$ docker image tag oaisoftwarealliance/proxy:latest oai-lte-multi-ue-proxy:latest
 ```
 
 ```bash
@@ -326,16 +324,16 @@ Removing network l2sim-oai-traffic-net
 In the `SMF` section, provide your own DNS IP address:
 
 ```yaml
-            DEFAULT_DNS_IPV4_ADDRESS=192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS=172.21.3.100
 ```
 
-In the `gNB` section, provide your docker-host primary IP address and interface name: in our case `192.168.18.193` and `eno1`.
+In the `gNB` section, provide your docker-host primary IP address and interface name: in our case `172.21.16.128` and `eno1`.
 
 ```yaml
             GNB_NGA_IF_NAME: eno1
-            GNB_NGA_IP_ADDRESS: 192.168.18.193
+            GNB_NGA_IP_ADDRESS: 172.21.16.128
             GNB_NGU_IF_NAME: eno1
-            GNB_NGU_IP_ADDRESS: 192.168.18.193
+            GNB_NGU_IP_ADDRESS: 172.21.16.128
 ```
 
 Same thing in the `nr-ue` section:

ci-scripts/yaml_files/5g_l2sim_tdd/docker-compose.yaml

@@ -120,7 +120,7 @@ services:
             - SMF_INTERFACE_PORT_FOR_SBI=80
             - SMF_INTERFACE_HTTP2_PORT_FOR_SBI=9090
             - SMF_API_VERSION=v1
-            - DEFAULT_DNS_IPV4_ADDRESS=192.168.18.129
+            - DEFAULT_DNS_IPV4_ADDRESS=172.21.3.100
             - DEFAULT_DNS_SEC_IPV4_ADDRESS=4.4.4.4
             - AMF_IPV4_ADDRESS=0.0.0.0
             - AMF_PORT=80
@@ -241,9 +241,9 @@ services:
             NSSAI_SD1: 112233
             AMF_IP_ADDRESS: 192.168.71.132
             GNB_NGA_IF_NAME: eno1
-            GNB_NGA_IP_ADDRESS: 192.168.18.193
+            GNB_NGA_IP_ADDRESS: 172.21.16.128
             GNB_NGU_IF_NAME: eno1
-            GNB_NGU_IP_ADDRESS: 192.168.18.193
+            GNB_NGU_IP_ADDRESS: 172.21.16.128
             LOCAL_S_IF_NAME: 'lo:'
             REMOTE_S_ADDRESS: 127.0.0.1
             LOCAL_S_ADDRESS: 127.0.0.2

ci-scripts/yaml_files/5g_rfsimulator/README.md

@@ -35,9 +35,7 @@ This page is only valid for an `Ubuntu18` host.
 
 # 1. Retrieving the images on Docker-Hub #
 
-Currently the images are hosted under the user account `rdefosseoai`.
-
-This may change in the future.
+Currently the images are hosted under the team account `oaisoftwarealliance`. They were previously hosted under the user account `rdefosseoai`.
 
 Once again you may need to log on [docker-hub](https://hub.docker.com/) if your organization has reached pulling limit as `anonymous`.
 
@@ -52,25 +50,25 @@ Now pull images.
 
 ```bash
 $ docker pull mysql:5.7
-$ docker pull rdefosseoai/oai-amf:latest
-$ docker pull rdefosseoai/oai-nrf:latest
-$ docker pull rdefosseoai/oai-smf:latest
-$ docker pull rdefosseoai/oai-spgwu-tiny:latest
+$ docker pull oaisoftwarealliance/oai-amf:latest
+$ docker pull oaisoftwarealliance/oai-nrf:latest
+$ docker pull oaisoftwarealliance/oai-smf:latest
+$ docker pull oaisoftwarealliance/oai-spgwu-tiny:latest
 
-$ docker pull rdefosseoai/oai-gnb:develop
-$ docker pull rdefosseoai/oai-nr-ue:develop
+$ docker pull oaisoftwarealliance/oai-gnb:develop
+$ docker pull oaisoftwarealliance/oai-nr-ue:develop
 ```
 
 And **re-tag** them for tutorials' docker-compose file to work.
 
 ```bash
-$ docker image tag rdefosseoai/oai-amf:latest oai-amf:latest
-$ docker image tag rdefosseoai/oai-nrf:latest oai-nrf:latest
-$ docker image tag rdefosseoai/oai-smf:latest oai-smf:latest
-$ docker image tag rdefosseoai/oai-spgwu-tiny:latest oai-spgwu-tiny:latest
+$ docker image tag oaisoftwarealliance/oai-amf:latest oai-amf:latest
+$ docker image tag oaisoftwarealliance/oai-nrf:latest oai-nrf:latest
+$ docker image tag oaisoftwarealliance/oai-smf:latest oai-smf:latest
+$ docker image tag oaisoftwarealliance/oai-spgwu-tiny:latest oai-spgwu-tiny:latest
 
-$ docker image tag rdefosseoai/oai-gnb:develop oai-gnb:develop
-$ docker image tag rdefosseoai/oai-nr-ue:develop oai-nr-ue:develop
+$ docker image tag oaisoftwarealliance/oai-gnb:develop oai-gnb:develop
+$ docker image tag oaisoftwarealliance/oai-nr-ue:develop oai-nr-ue:develop
 ```
 
 ```bash

ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml

@@ -120,7 +120,7 @@ services:
             - SMF_INTERFACE_PORT_FOR_SBI=80
             - SMF_INTERFACE_HTTP2_PORT_FOR_SBI=9090
             - SMF_API_VERSION=v1
-            - DEFAULT_DNS_IPV4_ADDRESS=192.168.18.129
+            - DEFAULT_DNS_IPV4_ADDRESS=172.21.3.100
             - DEFAULT_DNS_SEC_IPV4_ADDRESS=4.4.4.4
             - AMF_IPV4_ADDRESS=0.0.0.0
             - AMF_PORT=80

ci-scripts/yaml_files/fr1_epc_20897/docker-compose.yml

@@ -132,7 +132,7 @@ services:
             TZ: Europe/Paris
             SGW_INTERFACE_NAME_FOR_S11: eth0
             PGW_INTERFACE_NAME_FOR_SX: eth0
-            DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS: 172.21.3.100
             DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4
             PUSH_PROTOCOL_OPTION: 'true'
             APN_NI_1: oai.ipv4

ci-scripts/yaml_files/magma_nsa_20897/docker-compose.yml

@@ -116,7 +116,7 @@ services:
             TZ: Europe/Paris
             SGW_INTERFACE_NAME_FOR_S11: eth0
             PGW_INTERFACE_NAME_FOR_SX: eth0
-            DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129
+            DEFAULT_DNS_IPV4_ADDRESS: 172.21.3.100
             DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4
             PUSH_PROTOCOL_OPTION: 'true'
             APN_NI_1: oai.ipv4

ci-scripts/yaml_files/nsa_b200_enb/docker-compose.yml

@@ -20,7 +20,7 @@ services:
             NB_PRB: 25
             ENABLE_MEASUREMENT_REPORTS: 'yes'
             ENABLE_X2: 'yes'
-            MME_S1C_IP_ADDRESS: 192.168.18.210
+            MME_S1C_IP_ADDRESS: 172.21.16.136
             ENB_S1C_IF_NAME: eth0
             ENB_S1C_IP_ADDRESS: 192.168.68.130
             ENB_S1U_IF_NAME: eth0
@@ -29,7 +29,7 @@ services:
             RRC_INACTIVITY_THRESHOLD: 0
             FLEXRAN_ENABLED: 'no'
             FLEXRAN_INTERFACE_NAME: eth0
-            FLEXRAN_IPV4_ADDRESS: 192.168.18.210
+            FLEXRAN_IPV4_ADDRESS: 172.21.16.136
             THREAD_PARALLEL_CONFIG: PARALLEL_SINGLE_THREAD
             USE_ADDITIONAL_OPTIONS: --log_config.global_log_options level,nocolor,time,line_num,function
         volumes:

ci-scripts/yaml_files/nsa_b200_gnb/docker-compose.yml

@@ -15,7 +15,7 @@ services:
             TAC: 1
             ENABLE_X2: 'yes'
             ENB_X2_IP_ADDRESS: 192.168.68.130
-            MME_S1C_IP_ADDRESS: 192.168.18.210
+            MME_S1C_IP_ADDRESS: 172.21.16.136
             GNB_S1C_IF_NAME: eth0
             GNB_S1C_IP_ADDRESS: 192.168.68.194
             GNB_S1U_IF_NAME: eth0
@@ -24,9 +24,9 @@ services:
             RRC_INACTIVITY_THRESHOLD: 0
             FLEXRAN_ENABLED: 'no'
             FLEXRAN_INTERFACE_NAME: eth0
-            FLEXRAN_IPV4_ADDRESS: 192.168.18.210
+            FLEXRAN_IPV4_ADDRESS: 172.21.16.136
             THREAD_PARALLEL_CONFIG: PARALLEL_RU_L1_TRX_SPLIT
-            USE_ADDITIONAL_OPTIONS: -E -q --RUs.[0].sdr_addrs serial=30C51D4 --log_config.global_log_options level,nocolor,time,line_num,function
+            USE_ADDITIONAL_OPTIONS: -E -q --RUs.[0].sdr_addrs serial=30C51D4 --continuous-tx --log_config.global_log_options level,nocolor,time,line_num,function
         volumes:
             - /dev:/dev
         networks:

cmake_targets/CMakeLists.txt

@@ -258,7 +258,7 @@ set(CMAKE_EXE_LINKER_FLAGS  "${CMAKE_EXE_LINKER_FLAGS} -ggdb2 -Wl,-rpath -Wl,${C
 # these changes are related to hardcoded path to include .h files
 set(debugOpt "-ggdb2 -DMALLOC_CHECK_=3 -fno-delete-null-pointer-checks")
 set(CMAKE_C_FLAGS_DEBUG "${debugOpt} -O0")
-set(CMAKE_C_FLAGS_RELWITHDEBINFO "${debugOpt} -O2")
+set(CMAKE_C_FLAGS_RELWITHDEBINFO "${debugOpt} -O2 ")
 set(CMAKE_C_FLAGS_RELEASE "-O3")
 
 # Enable assert() for RelWithDebInfo builds
@@ -322,6 +322,7 @@ add_boolean_option(UE_AUTOTEST_TRACE   False "Activate UE autotest specific logs
 add_boolean_option(UE_DEBUG_TRACE      False "Activate UE debug trace")
 add_boolean_option(UE_TIMING_TRACE     False "Activate UE timing trace")
 add_boolean_option(DEBUG_CONSOLE       False "disables stdout/stderr buffering")
+set(JSONLOGS $ENV{JSONLOGS})
 
 set (OCP_ITTI ${OPENAIR_DIR}/common/utils/ocp_itti)
 add_library(ITTI
@@ -1188,6 +1189,10 @@ add_library(UTIL
   ${OPENAIR_DIR}/common/utils/backtrace.c
   ${OPENAIR_DIR}/common/utils/time_meas.c
 )
+if (${JSONLOGS})
+  target_compile_definitions(UTIL PUBLIC -DOAI_LOG_JSON)
+endif()
+
 
 set(SECU_OSA_SRC
   ${OPENAIR2_DIR}/UTIL/OSA/osa_key_deriver.c
@@ -2541,7 +2546,15 @@ add_executable(test5Gnas
 )
 target_link_libraries (test5Gnas LIB_5GNAS_GNB CONFIG_LIB minimal_lib )
 
-
+add_executable(tstlog 
+  ${OPENAIR_DIR}/common/utils/LOG/tst-log.cpp
+  ${OPENAIR_DIR}/common/utils/minimal_stub.c
+  ${T_SOURCE}
+  )                                                                                                                     
+target_link_libraries (tstlog pthread rt dl ${T_LIB} CONFIG_LIB UTIL)
+if (${JSONLOGS})
+  target_link_libraries (tstlog uuid)
+endif()
 # lte-softmodem is both eNB and UE implementation
 ###################################################
 
@@ -2584,6 +2597,9 @@ target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES})
 target_link_libraries (lte-softmodem pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES})
 target_link_libraries (lte-softmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-softmodem ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (lte-softmodem uuid})
+endif()
 
 
 add_executable(ocp-enb
@@ -2620,6 +2636,9 @@ target_link_libraries (ocp-enb
   ${RAL_LIB} ${NAS_UE_LIB} ITTI ${FLPT_MSG_LIB}  ${FLEXRAN_AGENT_LIB} ${FSPT_MSG_LIB}
   -Wl,--end-group z dl)
 target_link_libraries (ocp-enb ${LIBXML2_LIBRARIES} pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${LIB_LMS_LIBRARIES} ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (ocp-enb uuid)
+endif()
 
 add_executable(oairu
   ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
@@ -2640,6 +2659,9 @@ target_link_libraries (oairu
   -Wl,--end-group z dl)
 
 target_link_libraries (oairu pthread m CONFIG_LIB rt ${CMAKE_DL_LIBS} ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (oairu uuid)
+endif()
 
 
 # lte-uesoftmodem is  UE implementation
@@ -2682,6 +2704,9 @@ target_link_libraries (lte-uesoftmodem ${LIBXML2_LIBRARIES})
 target_link_libraries (lte-uesoftmodem pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
 target_link_libraries (lte-uesoftmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-uesoftmodem ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (lte-uesoftmodem uuid)
+endif()
 
 # nr-softmodem
 ###################################################
@@ -2723,6 +2748,9 @@ target_link_libraries (nr-softmodem ${LIBXML2_LIBRARIES})
 target_link_libraries (nr-softmodem pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
 target_link_libraries (nr-softmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (nr-softmodem ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (nr-softmodem uuid)
+endif()
 
 add_dependencies( nr-softmodem ldpc_orig ldpc_optim ldpc_optim8seg ldpc )
 
@@ -2764,6 +2792,9 @@ target_link_libraries (nr-uesoftmodem ${LIBXML2_LIBRARIES})
 target_link_libraries (nr-uesoftmodem pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
 target_link_libraries (nr-uesoftmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (nr-uesoftmodem ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (nr-uesoftmodem uuid)
+endif()
 
 add_dependencies( nr-uesoftmodem ldpc_orig ldpc_optim ldpc_optim8seg ldpc )
 if (CUDA_FOUND)
@@ -2788,6 +2819,9 @@ target_link_libraries (dlsim_tm4
   -Wl,--start-group SIMU_COMMON SIMU UTIL SCHED_LIB SCHED_RU_LIB PHY ITTI -Wl,--end-group
   pthread m rt CONFIG_LIB ${ATLAS_LIBRARIES} ${T_LIB}
   )
+if (${JSONLOGS})
+  target_link_libraries (dlsim_tm4 uuid)
+endif()
 
 add_executable(rftest
   ${OPENAIR_DIR}/openair1/PHY/TOOLS/calibration_test.c
@@ -2796,7 +2830,10 @@ add_executable(rftest
   ${OPENAIR_DIR}/executables/softmodem-common.c
   ${SHLIB_LOADER_SOURCES}
 )
-target_link_libraries(rftest minimal_lib CONFIG_LIB PHY_NR_COMMON UTIL pthread dl m forms ${T_LIB} )
+target_link_libraries(rftest minimal_lib CONFIG_LIB PHY_NR_COMMON UTIL pthread dl m forms ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (rftest uuid)
+endif()
 
 add_executable(polartest
   ${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/polartest.c
@@ -2808,6 +2845,9 @@ target_link_libraries(polartest
   -Wl,--start-group UTIL SIMU_COMMON  SIMU PHY_COMMON PHY_NR PHY_NR_COMMON PHY_NR_UE CONFIG_LIB -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} dl
   )
+if (${JSONLOGS})
+  target_link_libraries (polartest uuid)
+endif()
 
 add_executable(smallblocktest
   ${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/smallblocktest.c
@@ -2821,6 +2861,9 @@ target_link_libraries(smallblocktest
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_NR PHY_COMMON PHY_NR_COMMON CONFIG_LIB -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} dl
   )
+if (${JSONLOGS})
+  target_link_libraries (smallblocktest uuid)
+endif()
 
 
 add_executable(ldpctest
@@ -2838,10 +2881,14 @@ target_link_libraries(ldpctest
   -Wl,--start-group UTIL SIMU_COMMON  SIMU PHY_NR PHY_COMMON PHY_NR_COMMON CONFIG_LIB -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} dl
   )
+if (${JSONLOGS})
+  target_link_libraries (ldpctest uuid)
+endif()
 
 add_executable(nr_dlschsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlschsim.c
   ${OPENAIR_DIR}/common/utils/nr/nr_common.c
+  ${OPENAIR_DIR}/executables/softmodem-common.c
   ${T_SOURCE}
   ${SHLIB_LOADER_SOURCES}
   )
@@ -2849,6 +2896,9 @@ target_link_libraries(nr_dlschsim
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
   )
+if (${JSONLOGS})
+  target_link_libraries (nr_dlschsim uuid)
+endif()
 
 add_executable(nr_pbchsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pbchsim.c
@@ -2860,11 +2910,15 @@ target_link_libraries(nr_pbchsim
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
   )
+if (${JSONLOGS})
+  target_link_libraries (nr_pbchsim uuid)
+endif()
 
 #PUCCH ---> Prashanth
 add_executable(nr_pucchsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pucchsim.c
   ${OPENAIR_DIR}/common/utils/nr/nr_common.c
+  ${OPENAIR_DIR}/executables/softmodem-common.c
   ${T_SOURCE}
   ${SHLIB_LOADER_SOURCES}
   )
@@ -2872,6 +2926,9 @@ target_link_libraries(nr_pucchsim
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
   )
+if (${JSONLOGS})
+  target_link_libraries (nr_pucchsim uuid)
+endif()
 
 add_executable(nr_dlsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlsim.c
@@ -2889,6 +2946,9 @@ target_link_libraries(nr_dlsim
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON RRC_LIB NR_RRC_LIB CONFIG_LIB L2_LTE_NR L2_NR HASHTABLE X2AP_ENB X2AP_LIB SECU_CN NGAP_GNB NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB -lz -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI ${OPENSSL_LIBRARIES} dl
   )
+if (${JSONLOGS})
+  target_link_libraries (nr_dlsim uuid)
+endif()
 target_compile_definitions(nr_dlsim PUBLIC -DPHYSICAL_SIMULATOR)
 
 add_executable(nr_prachsim
@@ -2905,10 +2965,14 @@ add_executable(nr_prachsim
 target_link_libraries(nr_prachsim
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON RRC_LIB NR_RRC_LIB CONFIG_LIB L2_LTE_NR L2_NR HASHTABLE X2AP_ENB X2AP_LIB SECU_CN NGAP_GNB NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB -lz -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI ${OPENSSL_LIBRARIES} dl)
+if (${JSONLOGS})
+  target_link_libraries (nr_prachsim uuid)
+endif()
 
 add_executable(nr_ulschsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulschsim.c
   ${OPENAIR_DIR}/common/utils/nr/nr_common.c
+  ${OPENAIR_DIR}/executables/softmodem-common.c
   ${PHY_INTERFACE_DIR}/queue_t.c
   ${T_SOURCE}
   ${SHLIB_LOADER_SOURCES}
@@ -2917,6 +2981,9 @@ target_link_libraries(nr_ulschsim
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI dl
   )
+if (${JSONLOGS})
+  target_link_libraries (nr_ulschsim uuid)
+endif()
 
 add_executable(nr_ulsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulsim.c
@@ -2934,6 +3001,9 @@ target_link_libraries(nr_ulsim
   -Wl,--start-group UTIL SIMU_COMMON SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_NR MAC_UE_NR MAC_NR_COMMON RRC_LIB NR_RRC_LIB CONFIG_LIB L2_LTE_NR L2_NR HASHTABLE X2AP_ENB X2AP_LIB SECU_CN NGAP_GNB NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB -lz -Wl,--end-group
   m pthread ${ATLAS_LIBRARIES} ${T_LIB} ITTI ${OPENSSL_LIBRARIES} dl
   )
+if (${JSONLOGS})
+  target_link_libraries (nr_ulsim uuid)
+endif()
 target_compile_definitions(nr_ulsim PUBLIC -DPHYSICAL_SIMULATOR)
 
 foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
@@ -2952,6 +3022,9 @@ foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim pr
     -Wl,--start-group SIMU_COMMON SIMU UTIL SCHED_LIB SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_NR_COMMON PHY PHY_UE PHY_RU ITTI -Wl,--end-group
     pthread m rt CONFIG_LIB ${ATLAS_LIBRARIES}  ${XFORMS_LIBRARIES} ${T_LIB} dl
     )
+if (${JSONLOGS})
+  target_link_libraries (${myExe} uuid)
+endif()
 
 endforeach(myExe)
 
@@ -2973,6 +3046,9 @@ foreach(myExe s1ap
   target_link_libraries (test_${myExe}
     -Wl,--start-group SECU_CN UTIL -Wl,--end-group m rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} CONFIG_LIB
     )
+  if (${JSONLOGS})
+    target_link_libraries (test_${myExe} uuid)
+  endif()
 endforeach(myExe)
 
 # to be added
@@ -3111,6 +3187,9 @@ target_link_libraries (nr-ittisim ${LIBXML2_LIBRARIES})
 target_link_libraries (nr-ittisim pthread m CONFIG_LIB rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
 target_link_libraries (nr-ittisim ${LIB_LMS_LIBRARIES})
 target_link_libraries (nr-ittisim ${T_LIB})
+if (${JSONLOGS})
+  target_link_libraries (nr-ittisim uuid)
+endif()
 
 add_dependencies( nr-ittisim ldpc_orig ldpc_optim ldpc_optim8seg ldpc )
 

cmake_targets/autotests/test_case_list.xml

@@ -1093,7 +1093,7 @@
                                  (Test8: 217 PRB 100 PDSCH-PRBs 110 PDSCH-Offset),
                                  (Test9: 106 PRBs 50 PDSCH-PRBs MCS Index 27),
                                  (Test10: 106 PRBs 50 PDSCH-PRBs MCS Index 16),
-                                 (Test11: 106 MCS-TABLE 256 QAM MCS Index 27),
+                                 (Test11: 106 MCS-TABLE 256 QAM MCS Index 26),
                                  (Test12: HARQ test 25% TP 4 rounds),
                                  (Test13: HARQ test 33% TP 3 rounds),
                                  (Test14: HARQ test 50% TP 2 rounds),
@@ -1121,7 +1121,7 @@
                   -n100 -R217 -a110 -s5 -b100
                   -n100 -e27 -s30
                   -n100 -e16 -s10
-                  -n100 -q1 -e27 -s30
+                  -n100 -q1 -e26 -s30
                   -n100 -s1 -t25
                   -n100 -s1 -t33
                   -n100 -s1 -t50
@@ -1184,9 +1184,10 @@
     
     <testCase id="015108">
       <class>execution</class>
-      <desc>nr_ulschsim Test cases. (Test1: 106 PRB),
-                                    (Test2: 217 PRB),
-                                    (Test3: 273 PRB)</desc>
+      <desc>nr_ulschsim Test cases. (Test1: 106 PRBs),
+                                    (Test2: 217 PRBs),
+                                    (Test3: 273 PRBs)
+                                    (Test4: 106 PRBs 4-layer MIMO)</desc>
       <pre_compile_prog></pre_compile_prog>
       <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
       <compile_prog_args> --phy_simulators  -c </compile_prog_args>
@@ -1195,8 +1196,9 @@
       <main_exec> $OPENAIR_DIR/targets/bin/nr_ulschsim.Rel15</main_exec>
       <main_exec_args>-R 106 -m9 -s13 -n100
                       -R 217 -m15 -s15 -n100
-                      -R 273 -m19 -s20 -n100</main_exec_args>
-      <tags>nr_ulschsim.test1 nr_ulschsim.test2 nr_ulschsim.test3</tags>
+                      -R 273 -m19 -s20 -n100
+                      -R 106 -m9 -s13 -n100 -y4 -z4 -W4</main_exec_args>
+      <tags>nr_ulschsim.test1 nr_ulschsim.test2 nr_ulschsim.test3 nr_ulschsim.test4</tags>
       <search_expr_true>PUSCH test OK</search_expr_true>
       <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
       <nruns>3</nruns>
@@ -1304,7 +1306,9 @@
                                  (Test12: SC-FDMA, 216 PRBs),
                                  (Test13: SC-FDMA, 273 PRBs),
                                  (Test14: SC-FDMA, 3 DMRS),
-                                 (Test15: MCS 16 50 PRBs 2 RX_Antenna)</desc>
+                                 (Test15: MCS 19 50 PRBs 2 RX_Antenna)
+                                 (Test16: MCS 9 106 PRBs MIMO 2 layers)
+                                 (Test17: MCS 9 106 PRBs MIMO 4 layers)</desc>
       <pre_compile_prog></pre_compile_prog>
       <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
       <compile_prog_args> --phy_simulators  -c </compile_prog_args>
@@ -1320,14 +1324,16 @@
                       -n100 -s5 -T 2 1 2 -U 2 0 2
                       -n100 -s5 -T 2 2 2 -U 2 1 2
                       -n100 -s5 -a4 -b8 -T 2 1 2 -U 2 1 3
-                      -n100 -s5 -Z
+                      -n100 -Z -s5
                       -n100 -s5 -Z -r75
                       -n50 -s5 -Z -r216 -R217
                       -n50 -s5 -Z -r270 -R273
                       -n100 -s5 -Z -U 2 0 2
-                      -n100 -m16 -s10 -z2</main_exec_args>
+                      -n100 -m19 -s10 -S15 -z2
+                      -n100 -m9 -r106 -s10 -W2 -y2 -z2
+                      -n100 -m9 -r106 -s20 -W4 -y4 -z4</main_exec_args>
 
-      <tags>nr_ulsim.test1 nr_ulsim.test2 nr_ulsim.test3 nr_ulsim.test4 nr_ulsim.test5 nr_ulsim.test6 nr_ulsim.test7 nr_ulsim.test8 nr_ulsim.test9 nr_ulsim.test10 nr_ulsim.test11 nr_ulsim.test12 nr_ulsim.test13 nr_ulsim.test14 nr_ulsim.test15</tags>
+      <tags>nr_ulsim.test1 nr_ulsim.test2 nr_ulsim.test3 nr_ulsim.test4 nr_ulsim.test5 nr_ulsim.test6 nr_ulsim.test7 nr_ulsim.test8 nr_ulsim.test9 nr_ulsim.test10 nr_ulsim.test11 nr_ulsim.test12 nr_ulsim.test13 nr_ulsim.test14 nr_ulsim.test15 nr_ulsim.test16 nr_ulsim.test17</tags>
       <search_expr_true>PUSCH test OK</search_expr_true>
       <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
       <nruns>3</nruns>

cmake_targets/build_oai

@@ -59,6 +59,7 @@ BUILD_ECLIPSE=0
 NR="False"
 OPTIONAL_LIBRARIES="telnetsrv enbscope uescope nrscope"
 RU=0
+JSONLOGS=0
 CMAKE_C_FLAGS=()
 CMAKE_CXX_FLAGS=()
 
@@ -76,7 +77,7 @@ Options:
 --clean-kernel
    Erase previously installed features in kernel: iptables, drivers, ...
 --cmake-opt
-   Pass the supplied option verbatim to cmake.
+   Pass the supplied option verbatim to cmake. If -DOAI_LOG_JSON is specified, it activates JSON formatting for logs.
 -d | --build-dir
    Sets build directory (will be <oai-root>/cmake_targets/<build-dir>/build)
 -I | --install-external-packages
@@ -172,6 +173,8 @@ Options:
    Enable the address sanitizer on all targets
 --ittiSIM
   Makes the itti simulator
+--target NAME
+  add NAME to the list of targets to be built. To specify more targets, you can call multiple times this option. I.e. '--target tstlog --target gNB'
 -h | --help
    Print this help
 
@@ -184,7 +187,7 @@ Usage (regular):
 
 
 function main() {
-
+  execlist=""
   until [ -z "$1" ]
   do
     case "$1" in
@@ -202,8 +205,15 @@ function main() {
             clean_kernel
             echo_info "Erased iptables config and removed modules from kernel"
             shift;;
-       --cmake-opt)
-            CMAKE_CMD="$CMAKE_CMD $2"
+       --cmake-opt)  
+            if [ "$2" == "-DOAI_LOG_JSON" ]; then
+              JSONLOGS=1
+              export JSONLOGS=1
+              echo_info "Activated JSON formatting for logs"
+            else
+              CMAKE_CMD="$CMAKE_CMD $2"
+            fi
+            
             shift 2;;
        -d | --build-dir)
             BUILD_DIR=$2
@@ -452,11 +462,15 @@ function main() {
             CMAKE_CMD="$CMAKE_CMD -DITTI_SIM=True"
             echo_info "Will compile itti simulator"
             shift;;
+        --target)
+            execlist="$execlist $2"
+            echo_info "Added '$2' to the list of targets"
+            shift 2;;
         -h | --help)
             print_help
             exit 1;;
-	*)
-	    print_help
+	      *)
+	          print_help
             echo_fatal "Unknown option $1"
             break;;
    esac
@@ -585,8 +599,7 @@ function main() {
     echo_info "Installing optional packages"
     check_install_additional_tools
   fi
-
-  execlist=""
+  
   if [ "$eNB" = "1" ] ; then
       execlist="$execlist lte-softmodem"
   fi

cmake_targets/phy_simulators

@@ -1 +0,0 @@
-ran_build/

cmake_targets/tools/build_helper

@@ -381,7 +381,7 @@ check_install_usrp_uhd_driver(){
         $SUDO apt-get remove libuhd3.14.1 -y || true
         $SUDO apt-get remove libuhd3.15.0 -y || true
         local distribution=$(get_distribution_release)
-        if [[ "$distribution" == "ubuntu18.04" ]]; then
+        if [[ "$distribution" == "ubuntu18.04" || "$distribution" == "ubuntu20.04" || "$distribution" == "ubuntu22.04" ]]; then
             $SUDO apt-get remove libuhd4.0.0 -y || true
             $SUDO apt-get remove libuhd4.1.0 -y || true
         fi
@@ -410,13 +410,15 @@ check_install_usrp_uhd_driver(){
             x=$((x + 1))
         done
         $SUDO apt-get update
-        $SUDO apt-get -y install  python python-tk libboost-all-dev libusb-1.0-0-dev
-        if [[ "$distribution" == "ubuntu16.04" ]]; then
+        $SUDO apt-get -y install python-tk libboost-all-dev libusb-1.0-0-dev
+        case "$(get_distribution_release)" in
+          "ubuntu16.04")
             $SUDO apt-get -y install libuhd-dev libuhd3.15.0 uhd-host
-        fi
-        if [[ "$distribution" == "ubuntu18.04" ]]; then
-            $SUDO apt-get -y install libuhd-dev libuhd4.1.0 uhd-host
-        fi
+            ;;
+          "ubuntu18.04" | "ubuntu20.04" | "ubuntu22.04")
+            $SUDO apt-get -y install libuhd-dev libuhd4.2.0 uhd-host
+            ;;
+        esac
     elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
         if [ $IS_CONTAINER -eq 0 ]
         then
@@ -624,6 +626,7 @@ check_install_additional_tools (){
         nscd \
         bc \
         ntp"
+    if [ $JSONLOGS -eq 1 ]; then PACKAGE_LIST="$PACKAGE_LIST uuid-dev"; fi
   elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
     PACKAGE_LIST="\
       check \
@@ -652,6 +655,7 @@ check_install_additional_tools (){
       python-netifaces \
       scipy \
       python-matplotlib"
+    if [ $JSONLOGS -eq 1 ]; then PACKAGE_LIST="$PACKAGE_LIST libuuid-devel"; fi
   elif [[ "$OS_DISTRO" == "fedora" ]]; then
     PACKAGE_LIST=" \
       check \
@@ -680,6 +684,7 @@ check_install_additional_tools (){
       python-netifaces \
       python-scipy \
       python-matplotlib"
+    if [ $JSONLOGS -eq 1 ]; then PACKAGE_LIST="$PACKAGE_LIST libuuid-devel"; fi
   fi
     $SUDO $INSTALLER install -y $PACKAGE_LIST $optional_packages
 

common/config/config_load_configmodule.h

@@ -58,6 +58,10 @@
 #define CONFIG_HELP           (1<<20)           // print help message
 #define CONFIG_ABORT          (1<<21)           // config failed,abort execution 
 #define CONFIG_NOOOPT         (1<<22)           // no -O option found when parsing command line
+
+#ifdef __cplusplus
+extern "C" {
+#endif
 typedef int(*configmodule_initfunc_t)(char *cfgP[],int numP);
 typedef int(*configmodule_getfunc_t)(paramdef_t *,int numparams, char *prefix);
 typedef int(*configmodule_getlistfunc_t)(paramlist_def_t *, paramdef_t *,int numparams, char *prefix);
@@ -114,6 +118,8 @@ extern configmodule_interface_t *cfgptr;
 extern configmodule_interface_t *load_configmodule(int argc, char **argv, uint32_t initflags);
 extern void end_configmodule(void);
 #define CONFIG_PRINTF_ERROR(f, x... ) if (isLogInitDone ()) { LOG_E(ENB_APP,f,x);} else {printf(f,x);}; if ( !CONFIG_ISFLAGSET(CONFIG_NOABORTONCHKF) ) exit_fun("exit because configuration failed\n");
-
+#ifdef __cplusplus
+}
+#endif
 
 #endif  /* INCLUDE_CONFIG_LOADCONFIGMODULE_H */

common/utils/LOG/log.h

@@ -56,7 +56,7 @@
 /*----------------------------------------------------------------------------*/
 #include <assert.h>
 #ifdef NDEBUG
-#warning assert is disabled
+  #warning assert is disabled
 #endif
 #define NUM_ELEMENTS(ARRAY) (sizeof(ARRAY) / sizeof(ARRAY[0]))
 #define CHECK_INDEX(ARRAY, INDEX) assert((INDEX) < NUM_ELEMENTS(ARRAY))
@@ -129,6 +129,7 @@ extern "C" {
 #define FLAG_FILE_LINE   0x0040
 #define FLAG_TIME        0x0100
 #define FLAG_THREAD_ID   0x0200
+#define FLAG_CORR_ID     0x0400 /*!< \brief: activate correlation ID in json formatted logs*/
 #define FLAG_INITIALIZED 0x8000
 
 #define SET_LOG_OPTION(O)   g_log->flag = (g_log->flag | O)
@@ -267,7 +268,7 @@ typedef struct  {
   int               level;
   int               savedlevel;
   int               flag;
-  int               filelog;
+  int               filelog; // flag set to 1 when using a sink of type file, stdout if set to 0
   char              *filelog_name;
   FILE              *stream;
   log_vprint_func_t vprint;
@@ -284,6 +285,11 @@ typedef struct {
   char                   *filelog_name;
   uint64_t                debug_mask;
   uint64_t                dump_mask;
+  unsigned char           global_logfile;
+  FILE                   *global_logfilep;
+  off_t                   rotation_size;// in bytes, 0 means disabled
+  unsigned int            rotation_time;// in seconds. 0 means disabled
+  time_t                  rotation_start_time; // timestamp in seconds since Unix-Epoch
 } log_t;
 
 
@@ -301,36 +307,64 @@ extern "C" {
 #endif
 /*--- INCLUDES ---------------------------------------------------------------*/
 #    include "log_if.h"
-/*----------------------------------------------------------------------------*/
+
+
+/**
+ * Initialize the logging framework allocating internal memory for API global structure 'g_log', setting defaults and
+ * reading parameters from the configuration file (if exists) and command line. There is no environment variable handling.
+ * In order of priority, logs are disabled thanks to loglevel OAILOG_DISABLE and sink to file per component. Internally it
+ * leverages log API function log_getconfig().
+ *
+ * @return: 0 (successful), !=0 (error), exit(1) if memory failure
+ */
 int  logInit (void);
-void logTerm (void);
 int  isLogInitDone (void);
+int register_log_component(char *name, char *fext,int compidx);
 void logRecord_mt(const char *file, const char *func, int line,int comp, int level, const char *format, ...) __attribute__ ((format (printf, 6, 7)));
 void vlogRecord_mt(const char *file, const char *func, int line, int comp, int level, const char *format, va_list args );
 void log_dump(int component, void *buffer, int buffsize,int datatype, const char *format, ... );
-int  set_log(int component, int level);
-void set_glog(int level);
 
+/**
+ * set log level for log component and check also if the stream associated is open. If it is not, give priority to file sink
+ * type of log stream
+ * @return: 0(success), !=-0(failure)
+ */
+int  set_log(int component, int level);
+/*
+ * @return: 0(success), !=-0(failure)
+ */
+int  set_glog(int level);
 void set_glog_onlinelog(int enable);
-void set_glog_filelog(int enable);
-void set_component_filelog(int comp);
+
+/**
+ * Set sink logging type globally. Sinks are of 2 types: stdout or file. You choose among them using ENABLE parameter
+ *
+ * @param enable if param is != 0, all the logs will be redirected to a global file, else logs will be redirected to stdout
+ * @return: 0(success), !=-0(failure)
+ */
+int set_glog_filelog(int enable);
+/*
+ * @return: 0(success), !=-0(failure)
+ */
+int set_component_filelog(int comp);
 void close_component_filelog(int comp);
 void set_component_consolelog(int comp);
+
+void logTerm (void);
+void logClean (void);
+
 int  map_str_to_int(mapping *map, const char *str);
 char *map_int_to_str(mapping *map, int val);
-void logClean (void);
 int  is_newline( char *str, int size);
 
-int register_log_component(char *name, char *fext, int compidx);
-
 #define LOG_MEM_SIZE 100*1024*1024
 #define LOG_MEM_FILE "./logmem.log"
 void flush_mem_to_file(void);
 int logInit_log_mem(void);
 void close_log_mem(void);
-  
+
 typedef struct {
-  char* buf_p;
+  char *buf_p;
   int buf_index;
   int enable_flag;
 } log_mem_cnt_t;
@@ -364,7 +398,7 @@ typedef struct {
 #define MATLAB_CSHORT_BRACKET1 13
 #define MATLAB_CSHORT_BRACKET2 14
 #define MATLAB_CSHORT_BRACKET3 15
-  
+
 int32_t write_file_matlab(const char *fname, const char *vname, void *data, int length, int dec, unsigned int format, int multiVec);
 
 /*----------------macro definitions for reading log configuration from the config module */
@@ -372,8 +406,11 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
 
 #define LOG_CONFIG_STRING_GLOBAL_LOG_LEVEL                 "global_log_level"
 #define LOG_CONFIG_STRING_GLOBAL_LOG_ONLINE                "global_log_online"
+// LOG_CONFIG_STRING_GLOBAL_LOG_INFILE: it is unused inside this log library.
 #define LOG_CONFIG_STRING_GLOBAL_LOG_INFILE                "global_log_infile"
 #define LOG_CONFIG_STRING_GLOBAL_LOG_OPTIONS               "global_log_options"
+#define LOG_CONFIG_STRING_GLOBAL_LOG_ROT_SIZE              "global_log_rotation_size"
+#define LOG_CONFIG_STRING_GLOBAL_LOG_ROT_TIME              "global_log_rotation_time"
 
 #define LOG_CONFIG_LEVEL_FORMAT                            "%s_log_level"
 #define LOG_CONFIG_LOGFILE_FORMAT                          "%s_log_infile"
@@ -393,14 +430,15 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
 /*   optname                               help                                          paramflags         XXXptr               defXXXval                          type        numelt */
 /*-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
 #define LOG_GLOBALPARAMS_DESC { \
-    {LOG_CONFIG_STRING_GLOBAL_LOG_LEVEL,   "Default log level for all componemts\n",              0, strptr:(char **)&gloglevel, defstrval:log_level_names[3].name, TYPE_STRING,     0}, \
-    {LOG_CONFIG_STRING_GLOBAL_LOG_ONLINE,  "Default console output option, for all components\n", 0, iptr:&(consolelog),         defintval:1,                       TYPE_INT,        0}, \
-    {LOG_CONFIG_STRING_GLOBAL_LOG_OPTIONS, LOG_CONFIG_HELP_OPTIONS,                               0, strlistptr:NULL,            defstrlistval:NULL,                TYPE_STRINGLIST, 0} \
+    {LOG_CONFIG_STRING_GLOBAL_LOG_LEVEL,   "Default log level for all components\n",              0, strptr:(char **)&gloglevel, defstrval:log_level_names[6].name, TYPE_STRING,     0}, \
+    {LOG_CONFIG_STRING_GLOBAL_LOG_ONLINE,  "Default console output option, for all components\n", 0, iptr:&(consolelog),         defintval:0,                       TYPE_INT,        0}, \
+    {LOG_CONFIG_STRING_GLOBAL_LOG_OPTIONS, LOG_CONFIG_HELP_OPTIONS,                               0, strlistptr:NULL,            defstrlistval:NULL,                TYPE_STRINGLIST, 0}, \
+    {LOG_CONFIG_STRING_GLOBAL_LOG_ROT_SIZE, "Log Rotation: maximum log size in MB for file rotation (0 to disable/default)\n",         0, uptr:&(rotationsize), defuintval:0, TYPE_UINT, 0},\
+    {LOG_CONFIG_STRING_GLOBAL_LOG_ROT_TIME, "Log Rotation: maximum elapsed time in seconds for file rotation (0 to disable/default)\n", 0, uptr:&(rotationtime), defuintval:0, TYPE_UINT, 0} \
   }
 
 #define LOG_OPTIONS_IDX   2
 
-
 /*----------------------------------------------------------------------------------*/
 /** @defgroup _debugging debugging macros
  *  @ingroup _macro
@@ -447,7 +485,7 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
 
 #    define LOG_M(file, vector, data, len, dec, format) do { write_file_matlab(file, vector, data, len, dec, format, 0);} while(0)
 #    define LOG_VAR(A,B) A B
-#    define T_ACTIVE(a) (0) 
+#    define T_ACTIVE(a) (0)
 #  endif /* T_TRACER */
 
 /* avoid warnings for variables only used in LOG macro's but set outside debug section */

common/utils/LOG/logexample.conf

@@ -0,0 +1,43 @@
+/* vim settings :setf config 
+ * Configuration file for log system integration tests
+ * 
+ * This file adheres to the libconfig grammar format that you can find in https://hyperrealm.github.io/libconfig/libconfig_manual.html
+ * Parameters below are specific to log system and are defined in log.h 
+ * Caveats: 
+ * Support for new json unified format has to be explicitly enabled on compilation flag(-DOAI_LOG_JSON) of log library
+ * 
+ * If you do not put this section log_config, the program will not log anything. 
+ */
+log_config :                                                                                                            
+{
+    
+    # Set the log level for all the components. It will also force log redirection to a file sink if global_log_online 
+    # is not set or set to 0
+    global_log_level   = "debug";
+    
+    # set log level per component. If the corresponding '*_log_infile' is not present, it will check the 'global_log_level'
+    # to decide where to log
+    hw_log_level       = "info";
+
+    # Activation of log redirection to file sink per component. By default it is deactivated.
+    # Syntax: <component>_log_infile  = boolean_val(0|1)
+    # Example: hw_log_infile           = 1
+
+    # Activation of stdout logs globally for all the components. By default it is deactivated.
+    # If some components has log to file activated it will honour that component setting
+    # Syntax: global_log_online       = boolean_val(0|1)
+
+    # Log formatting options for printing, globally or per component. By default, the formatting includes the 
+    # component name and colors.
+    # Syntax: global_log_options: list of attributes 
+    # where attributes can be: nocolor, level, thread, line_num, function, time, thread_id, correlation_id. 
+    global_log_options = ("level","nocolor","time");
+
+    # Set the maximum log size in MB for triggering logfile rotation. By default it is disabled.
+    # Syntax: global_log_rotation_size: uint_val, 0 means disabled
+    global_log_rotation_size = 1;
+
+    # Set the maximum elapsed time in seconds for triggering file rotation. By default it is disabled.
+    # Syntax: global_log_rotation_time: uint_val, 0 means disabled
+    global_log_rotation_time = 1;
+};

common/utils/LOG/tst-log.cpp

@@ -0,0 +1,243 @@
+/*
+ * unit tests to evaluate integration of Log library.
+ *
+ * Example of running commandline: ./tstlog [--run_test=testname] [BOOST Test options]
+ * I.e.: ./tstlog --run_test=test_log_rotation_1 --report_level=detailed
+ */
+
+#define BOOST_TEST_MODULE tstlog
+#include <boost/test/included/unit_test.hpp>
+#include <iostream>
+#include <fstream>
+
+#undef T_TRACER
+#include "log.h"
+#include "common/config/config_load_configmodule.h"
+using namespace boost::unit_test;
+
+volatile int oai_exit;//the definition of this variable is needed by log.c:flush_mem_to_file() and it is declared in log.c
+const char *global_oai_logfile="/tmp/openair.log";
+const char *hw_logfile="/tmp/HW.";
+const char *phy_logfile="/tmp/PHY.log";
+std::list<int> known_bugged_comp = {19, 24, 40};
+std::string conf1="\
+log_config :\n\
+{\n\
+    global_log_level   = \"debug\";\n\
+    hw_log_level       = \"info\";\n\
+    global_log_options = (\"level\",\"nocolor\",\"time\");\n\
+    global_log_rotation_size = 1;\n\
+    global_log_rotation_time = 1;\n\
+};\n";
+
+std::string conf2="\
+log_config :\n\
+{\n\
+    global_log_options = (\"level\",\"nocolor\",\"time\");\n\
+    global_log_rotation_size = 1;\n\
+    global_log_rotation_time = 1;\n\
+};\n";
+
+std::string conf3="\
+log_config :\n\
+{\n\
+    global_log_options = (\"level\",\"nocolor\",\"time\", \"correlation_id\");\n\
+    global_log_rotation_size = 0;\n\
+    global_log_rotation_time = 0;\n\
+};\n";
+
+std::string conf4="\
+log_config :\n\
+{\n\
+  global_log_level                      =\"info\";\n\
+  global_log_infile                     = 1; # warn: this parameter is silently discarded from configuration parser \n\
+  global_log_online                     = 0;\n\
+};\n";
+#define TMPLOCALCONF "tstlog.conf.tmp"
+const char *argv[4] = {"tstlog", "-O", TMPLOCALCONF, NULL};
+int argc=3;
+
+void log_comp_tostr(unsigned int i) {
+  std::cout << "Component [" << i << "- " << g_log->log_component[i].name << "]: stream "<< g_log->log_component[i].stream
+            << ", level:" << g_log->log_component[i].level << ", filelog: " << g_log->log_component[i].filelog << std::endl;
+}
+bool search_in_file(std::string fname, std::string match) {
+  std::ifstream f(fname);
+
+  if (!f)
+    return false;
+
+  std::string t;
+
+  while (getline(f, t))
+    if (t.find(match, 0) != t.npos)
+      return true;
+
+  f.close();
+  return false;
+}
+
+void create_test_conf_file(std::string confcontent) {
+  std::remove(TMPLOCALCONF);
+  std::ofstream file(TMPLOCALCONF);
+  file << confcontent;
+}
+
+BOOST_AUTO_TEST_CASE(test_log_rotation_1) {
+  // This test will be using global log file (/tmp/openair.log), simulating time expiring for log rotation.
+  // It is a test for single thread logging
+  create_test_conf_file(conf1);
+  std::remove(global_oai_logfile);
+  std::remove(hw_logfile);
+  BOOST_TEST_REQUIRE ((load_configmodule(argc, const_cast<char **>(argv), 0) != NULL), "Configuration module init failed");
+  BOOST_TEST ((logInit() == 0), true);
+  /*
+   * Sanity check for some field of global structure of log API.
+   * Expected: all components log to DEBUG level on global file, except for component 28 (HW) that will have its file and log at info level
+   */
+  BOOST_TEST (((g_log->global_logfile == 0) && (g_log->global_logfilep == NULL)), true);
+
+  for (int i=MIN_LOG_COMPONENTS; i < MAX_LOG_PREDEF_COMPONENTS; i++) {
+    auto itr = std::find(known_bugged_comp.begin(), known_bugged_comp.end(), i);
+
+    if (itr != known_bugged_comp.end())
+      continue;
+
+    bool sts = ((g_log->log_component[i].filelog == 1)   &&
+                (g_log->log_component[i].name != NULL)   &&
+                (g_log->log_component[i].stream != g_log->global_logfilep));
+    sts = (i == 28) ? sts && (g_log->log_component[i].level == OAILOG_INFO) : sts && (g_log->log_component[i].level == OAILOG_DEBUG);
+
+    if (sts == false) {
+      std::cout << "Failure at this component:";
+      log_comp_tostr(i);
+    }
+
+    BOOST_TEST (sts, true);
+  }
+
+  BOOST_TEST((set_glog(OAILOG_DEBUG) == 0), true);
+  BOOST_TEST((set_glog_filelog(true) == 0), true); // force dump to default logfile /tmp/openair.log.
+  BOOST_TEST (((g_log->global_logfile == 1) && (g_log->global_logfilep != NULL)), true);
+  LOG_I(HW, "First test for a string");
+  BOOST_TEST(set_glog(OAILOG_ERR) == 0, true);
+  LOG_I(HW, "You should not see this line");
+  BOOST_TEST((set_glog(OAILOG_DEBUG) == 0), true);
+  char string_truncation[1600];
+  memset(string_truncation, 's', 1599);
+  memset(&string_truncation[1599], '\0', 1);
+  LOG_I(HW, "%s", string_truncation);
+  sleep(5);// let's have log rotation
+  LOG_I(HW, "Spurious line terminator should not appear\n");
+  bool sts = search_in_file(hw_logfile, "\n");
+
+  if (sts == true) {
+    std::cout << "Offending line:";
+    std::ifstream f(hw_logfile);
+
+    if (f.is_open())
+      std::cout << f.rdbuf();
+  }
+
+  BOOST_TEST(sts == false);
+  logClean();
+  logTerm();
+  end_configmodule();
+  std::remove(TMPLOCALCONF);
+}
+
+BOOST_AUTO_TEST_CASE(test_log_rotation_2) {
+  // test using component log file (tmp/PHY.log), simulating time expiring for log rotation
+  // It is a test for single thread logging
+  create_test_conf_file(conf1);
+  std::remove(phy_logfile);
+  BOOST_TEST_REQUIRE ((load_configmodule(argc, const_cast<char **>(argv), 0) != NULL), "Configuration module init failed");
+  BOOST_TEST (logInit() == 0, true);
+  BOOST_TEST(set_glog(OAILOG_DEBUG) == 0, true);
+  BOOST_TEST(set_component_filelog(0) == 0, true);
+  LOG_I(PHY, "Second test for a string that should be moved to backup file");
+  sleep(5);
+  LOG_I(PHY, "this should go to a brand new file");
+  BOOST_TEST( search_in_file(phy_logfile, "this should go to a brand new file") == true);
+  BOOST_TEST( search_in_file(phy_logfile, "Second test for a string that should be moved to backup file") == false);
+  logClean();
+  logTerm();
+  end_configmodule();
+  std::remove(TMPLOCALCONF);
+}
+
+BOOST_AUTO_TEST_CASE(test_log_defaults) {
+  // testing log default values. You should not see anylog, not on console, not on file. It is a test for single thread logging
+  create_test_conf_file(conf2);
+  std::remove(phy_logfile);
+  BOOST_TEST_REQUIRE ((load_configmodule(argc, const_cast<char **>(argv), 0) != NULL), "Configuration module init failed");
+  BOOST_TEST (logInit() == 0, true);
+  LOG_I(PHY, "you should not see any log");
+  BOOST_TEST( search_in_file(phy_logfile, "you should not see any log") == false);
+  logClean();
+  logTerm();
+  end_configmodule();
+  std::remove(TMPLOCALCONF);
+}
+
+BOOST_AUTO_TEST_CASE(test_log_defaults_2) {
+  /* Test log default values. You should not see anylog, not on console, not on file. It is a test for single thread logging */
+  create_test_conf_file(conf3);
+  std::remove(phy_logfile);
+  BOOST_TEST_REQUIRE ((load_configmodule(argc, const_cast<char **>(argv), 0) != NULL), "Configuration module init failed");
+  BOOST_TEST (logInit() == 0, true);
+  BOOST_TEST(set_log(0, OAILOG_INFO) == 0, true);
+  LOG_I(PHY, "you should see this log to file");
+  BOOST_TEST( search_in_file(phy_logfile, "you should see this log to file") == true);
+  LOG_I(HW, "you should not see this log at all");
+  //XXX: TODO: intercept console output and general log file and validate this finding with BOOST_TEST() macro.
+  logClean();
+  logTerm();
+  end_configmodule();
+  std::remove(TMPLOCALCONF);
+}
+
+BOOST_AUTO_TEST_CASE(test_log_discarded_options) {
+  /* Test global log activation to file. You are expected to see only logs in their component file.
+   * To have logs to just one global file you need to call set_glog_filelog().
+   */
+  create_test_conf_file(conf4);
+  std::remove(phy_logfile);
+  std::remove(global_oai_logfile);
+  BOOST_TEST_REQUIRE ((load_configmodule(argc, const_cast<char **>(argv), 0) != NULL), "Configuration module init failed");
+  BOOST_TEST(logInit() == 0, true);
+  /*
+   * Sanity check for some field of global structure of log API.
+   * Expected: all components log to DEBUG level and have their own file sink
+   */
+  BOOST_TEST (((g_log->global_logfile == 0) && (g_log->global_logfilep == NULL)), true);
+
+  for (int i=MIN_LOG_COMPONENTS; i < MAX_LOG_PREDEF_COMPONENTS; i++) {
+    auto itr = std::find(known_bugged_comp.begin(), known_bugged_comp.end(), i);
+
+    if (itr != known_bugged_comp.end())
+      continue;
+
+    bool sts = ((g_log->log_component[i].filelog == 1)   &&
+                (g_log->log_component[i].name != NULL)   &&
+                (g_log->log_component[i].stream != g_log->global_logfilep) &&
+                (g_log->log_component[i].stream != NULL) &&
+                (g_log->log_component[i].stream != stdout) &&
+                (g_log->log_component[i].level == OAILOG_INFO));
+
+    if (sts == false) {
+      std::cout << "Failure at this component:";
+      log_comp_tostr(i);
+    }
+
+    BOOST_TEST (sts, true);
+  }
+
+  LOG_I(PHY, "test_log_discarded_options");
+  BOOST_TEST(search_in_file(phy_logfile, "test_log_discarded_options") == true);
+  BOOST_TEST(search_in_file(global_oai_logfile, "test_log_discarded_options") == false);
+  logClean();
+  logTerm();
+  end_configmodule();
+  std::remove(TMPLOCALCONF);
+}

common/utils/assertions.h

@@ -44,9 +44,9 @@
 #define _Assert_(cOND, aCTION, fORMAT, aRGS...)             \
 do {                                                        \
     if (!(cOND)) {                                          \
-        fprintf(stderr, "\nAssertion ("#cOND") failed!\n"   \
+        fprintf(stderr, "\nAssertion (%s) failed!\n"   \
                 "In %s() %s:%d\n" fORMAT,                   \
-                __FUNCTION__, __FILE__, __LINE__, ##aRGS);  \
+                #cOND, __FUNCTION__, __FILE__, __LINE__, ##aRGS);  \
         aCTION;                                             \
     }						\
 } while(0)

common/utils/lte/ue_power.c

@@ -33,10 +33,8 @@
 #include <stdint.h>
 #include <stdio.h>
 #include "PHY/defs_eNB.h"
-#include "PHY/TOOLS/dB_routines.h"
-
-extern int16_t hundred_times_delta_TF[100];
-extern uint16_t hundred_times_log10_NPRB[100];
+#include <openair1/PHY/TOOLS/tools_defs.h>
+#include <openair1/SCHED/sched_common_extern.h>
 
 int16_t estimate_ue_tx_power(int norm,uint32_t tbs, uint32_t nb_rb, uint8_t control_only, int ncp, uint8_t use_srs)
 {

common/utils/nr/nr_common.c

@@ -336,9 +336,9 @@ int get_dmrs_port(int nl, uint16_t dmrs_ports) {
   return p;
 }
 
-lte_frame_type_t get_frame_type(uint16_t current_band, uint8_t scs_index)
+frame_type_t get_frame_type(uint16_t current_band, uint8_t scs_index)
 {
-  lte_frame_type_t current_type;
+  frame_type_t current_type;
   int32_t delta_duplex = get_delta_duplex(current_band, scs_index);
 
   if (delta_duplex == 0)

common/utils/nr/nr_common.h

@@ -63,7 +63,7 @@ void get_coreset_rballoc(uint8_t *FreqDomainResource,int *n_rb,int *rb_offset);
 uint16_t config_bandwidth(int mu, int nb_rb, int nr_band);
 int get_nr_table_idx(int nr_bandP, uint8_t scs_index);
 int32_t get_delta_duplex(int nr_bandP, uint8_t scs_index);
-lte_frame_type_t get_frame_type(uint16_t nr_bandP, uint8_t scs_index);
+frame_type_t get_frame_type(uint16_t nr_bandP, uint8_t scs_index);
 uint16_t get_band(uint64_t downlink_frequency, int32_t delta_duplex);
 int NRRIV2BW(int locationAndBandwidth,int N_RB);
 int NRRIV2PRBOFFSET(int locationAndBandwidth,int N_RB);

common/utils/ocp_itti/intertask_interface.cpp

@@ -450,6 +450,7 @@ extern "C" {
   void itti_wait_tasks_end(void) {
     shutting_down = false;
     signal(SIGTERM, catch_sigterm);
+    //signal(SIGINT, catch_sigterm);
     while (! shutting_down)
     {
       sleep(24 * 3600);

doc/BUILD.md

@@ -193,6 +193,7 @@ Using the help option of the build script you can get the list of available opti
 | --UE                                                        | maintained and tested in CI                 | build `lte-uesoftmodem` the LTE UE                           |
 | --gNB                                                       | maintained and tested in CI                 | build `nr-softmodem` the 5G gNodeB                           |
 | --nrUE                                                      | maintained and tested in CI                 | build `nr-uesoftmodem` the 5G UE                             |
+| --arch-native                                               | maintained                                  | build with native architecture optimization                  |
 | --usrp-recplay                                              | deprecated                                  | use the USRP configuration parameters to use the record player. |
 | --build-lib                                                 | maintained                                  | build  optional shared library(ies), which can then be loaded at run time via command line option. Use the --help option to get the list of supported optional libraries. `all` can be used to build all available optional libraries. |
 | --UE-conf-nvram                                             | maintained                                  | Specifies the path to the input file used by the conf2uedata utility. defaults to [openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf](../openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf) |