dlsim execution

Conflicts:
	openair1/PHY/LTE_TRANSPORT/pmch.c
	openair1/PHY/LTE_TRANSPORT/transport_proto.h
	openair1/PHY/MODULATION/beamforming.c
	openair1/PHY/TOOLS/lte_dfts.c
	openair1/SCHED/phy_procedures_lte_eNb.c
	openair1/SCHED_UE/phy_procedures_lte_ue.c

.gitignore

@@ -1,8 +0,0 @@
-cscope.files
-cscope.files2
-cscope.in.out
-cscope.out
-cscope.po.out
-targets/bin/
-cmake_targets/log/
-cmake_targets/lte_build_oai/

.gitlab-ci.yml

@@ -0,0 +1,17 @@
+job1:
+  script:
+    - date
+    - pwd
+    - echo $OAI_TEST_CASE_GROUP
+    - echo $MACHINELIST
+    - echo $MACHINELISTGENERIC
+    - echo $RESULT_DIR
+    - echo $NRUNS_LTE_SOFTMODEM
+    - source oaienv
+    - rm -rf cmake_targets/autotests/log
+    - mkdir cmake_targets/autotests/log
+    - cd cmake_targets/autotests/v2
+    - python main.py
+    - date
+  only:
+    - triggers

Info_on_merge.txt

@@ -1,266 +0,0 @@
-*******************************************************************************************************
-*Below is the list of files whose conflicts have been reolved, including some comments for the files  *
-*where the conflicts are not resolved completely yet                                                  *
-*******************************************************************************************************
-
-cmake_targets/CMakeLists.txt 		(complicated)
-common/config/config_cmdline.c 		(Done but not sure)
-common/config/config_userapi.c		
-d2d_emulator_setup.txt
-nfapi/oai_integration/nfapi_pnf.c
-nfapi/open-nFAPI/vnf/src/vnf_p7.c
-openair1/PHY/INIT/lte_init.c
-openair1/PHY/INIT/lte_init_ue.c
-openair1/PHY/LTE_ESTIMATION/lte_sync_time.c
-openair1/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c (Do not know which definition of lte_ul_channel_estimation() to use.
-                                                         All the changes correspond to sidelink? Should it be modified to support both sidelink and  
-                                                         uplink now?)
-openair1/PHY/LTE_TRANSPORT/dci.c
-openair1/PHY/LTE_TRANSPORT/dci_tools.c
-openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
-openair1/PHY/LTE_TRANSPORT/pbch.c
-openair1/PHY/LTE_TRANSPORT/prach.c
-openair1/PHY/LTE_TRANSPORT/transport_eNB.h
-openair1/PHY/LTE_TRANSPORT/ulsch_demodulation.c
-openair1/PHY/LTE_UE_TRANSPORT/transport_proto_ue.h (Not sure whether the following func. definitions should be there: ulsch_qpsk_llr, 
-                                                    ulsch_16qam_llr, fill_dci_and_dlsch, fill_mdci_and_dlsch, fill_dci0,
-                                                    fill_ulsch, generate_eNB_dlsch_params_from_dci, generate_eNB_ulsch_params_from_rar.
-                                                     Same for: ul_subframe2pdcch_alloc_subframe, find_dlsch, )
-openair1/PHY/MODULATION/slot_fep_ul.c
-openair1/PHY/defs_eNB.h (Removed definitions of typedef uint8_t(decoder_if_t) and typedef uint8_t(*encoder_if_t)(uint8_t *input from defs_enb.h and left 
-                         only the corresponding definitions in defs_common.h. However they are slightly different. I kept the ones that were in  
-                         defs_enb.h (i.e., modified the ones on defs_common so that they are identical with the ones in defs_enb.h. Not sure if 
-                         this is correct).
-openair1/PHY/impl_defs_lte.h
-openair1/PHY/phy_vars.h
-openair1/SCHED/fapi_l1.c
-openair1/SCHED/phy_procedures_lte_eNb.c
-openair1/SCHED/sched_common.h (There are a lot of function definitions which are also in other header files and they differ. Not sure which one I 
-                              should keep.)
-
-openair1/SCHED_UE/phy_procedures_lte_ue.c     (Should we keep ue->generate_ul_signal[][] or ue->generate_ul_signal[]? I guess the first.
-                                              In conflicting lines 1491-1497 I am not sure which version to keep.)
-openair1/SIMULATION/ETH_TRANSPORT/multicast_link.c
-openair1/SIMULATION/LTE_PHY/dlsim.c
-openair2/COMMON/mac_rrc_primitives.h
-openair2/COMMON/platform_types.h
-openair2/COMMON/rrc_messages_types.h
-openair2/ENB_APP/enb_config.c (done but not so sure)
-openair2/ENB_APP/enb_paramdef.h
-openair2/ENB_APP/flexran_agent_ran_api.c
-openair2/LAYER2/MAC/config.c
-openair2/LAYER2/MAC/config_ue.c
-openair2/LAYER2/MAC/eNB_scheduler.c
-openair2/LAYER2/MAC/eNB_scheduler_RA.c
-openair2/LAYER2/MAC/eNB_scheduler_dlsch.c
-openair2/LAYER2/MAC/eNB_scheduler_mch.c
-openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
-openair2/LAYER2/MAC/mac.h
-openair2/LAYER2/MAC/mac_proto.h
-openair2/LAYER2/MAC/pre_processor.c
-openair2/LAYER2/MAC/ra_procedures.c
-openair2/LAYER2/MAC/ue_procedures.c
-openair2/LAYER2/PDCP_v10.1.0/pdcp.c
-openair2/LAYER2/PDCP_v10.1.0/pdcp.h
-openair2/LAYER2/PDCP_v10.1.0/pdcp_fifo.c
-openair2/LAYER2/PDCP_v10.1.0/pdcp_proto_extern.h
-openair2/LAYER2/RLC/UM_v9.3.0/rlc_um.c
-openair2/LAYER2/RLC/UM_v9.3.0/rlc_um.h
-openair2/LAYER2/RLC/UM_v9.3.0/rlc_um_control_primitives.c
-openair2/LAYER2/RLC/UM_v9.3.0/rlc_um_control_primitives.h
-openair2/LAYER2/RLC/rlc.c
-openair2/LAYER2/RLC/rlc.h
-openair2/LAYER2/RLC/rlc_mac.c
-openair2/LAYER2/RLC/rlc_mpls.c
-openair2/LAYER2/RLC/rlc_rrc.c
-openair2/NETWORK_DRIVER/UE_IP/common.c
-openair2/NETWORK_DRIVER/UE_IP/device.c
-openair2/NETWORK_DRIVER/UE_IP/local.h
-openair2/PHY_INTERFACE/IF_Module.c
-openair2/PHY_INTERFACE/UE_MAC_interface.h (Should be completely deleted)
-openair2/PHY_INTERFACE/phy_stub_UE.c
-openair2/PHY_INTERFACE/phy_stub_UE.h
-openair2/RRC/LTE/L2_interface.c
-openair2/RRC/LTE/L2_interface_ue.c
-openair2/RRC/LTE/MESSAGES/asn1_msg.c (Inside do_sib23() there are some lines ASN_SEQUENCE_ADD(...) corresponding to the addition of
-                                      SIB18, 19,21 which are commented out in the develop-version whereas they were intially integrated from 
-                                      Thinh in the sidelink branches. Is this the removal that Cedric did for RF operation because 
-                                      the SIB2/3 message turned out to be very large with these new elements?. 
-                                      Additional not sure whether lines 1646-1663 should be included or not. They were in the sidelink branch
-                                      version)
-openair2/RRC/LTE/MESSAGES/asn1_msg.h
-openair2/RRC/LTE/rrc_UE.c             (Some conflicts were complicated)
-openair2/RRC/LTE/rrc_defs.h
-openair2/RRC/LTE/rrc_eNB.c            (In function rrc_rx_tx() not sure which one we should keep:
-                                       if (ue_context_p->ue_context.ul_failure_timer >= 8) { #sidelink branch version
-                                       OR
-                                       if (ue_context_p->ue_context.ul_failure_timer >= 20000) { #Develop branch version
-                                       For now I keep the develop version
-openair2/RRC/LTE/rrc_proto.h
-openair3/GTPV1-U/gtpv1u_eNB.c
-targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp (Had we changed something in the sidelink branch? I have kept all the develop versions
-                                              of the conflicts)
-targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210-d2d.conf
-targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf
-targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi-STUB.conf
-targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi.conf
-targets/RT/USER/lte-enb.c
-targets/RT/USER/lte-ru.c
-targets/RT/USER/lte-softmodem.c
-targets/RT/USER/lte-softmodem.h
-targets/RT/USER/lte-ue.c					 (In UE_thread_synch() the following part referring to cell synchronization is
-                                              commented out:
-                                               /*
-	      									   FILE *fd;
-	      									   if ((fd = fopen("rxsig_frame0.dat","w"))!=NULL) {
-	      									   fwrite((void*)&UE->common_vars.rxdata[0][0],
-	      									   sizeof(int32_t),
-	      									   10*UE->frame_parms.samples_per_tti,
-	      									   fd);
-	      									   LOG_I(PHY,"Dummping Frame ... bye bye \n");
-	      									   fclose(fd);
-	      									   exit(0);
-	      									   }
-	      									   
-	      									   AssertFatal(1==0,"No cell synchronization found, abandoning");
-	      									   return &UE_thread_synch_retval; // not reached
-	      									   */
-	      									   
-	      									   	What should be done in the merged branch now? 
-	      									   	
-	      									   	In the branch version of init_UE_threads() which I kept I added the following lines originating
-	      									   	from the develop branch:
-	      									   	UE->proc.instance_cnt_synch = -1;
-  												UE->is_synchronized = 0;
-  												
-  												and then later:
-  												UE->proc.proc_rxtx[i].instance_cnt_rxtx = -1;)
-
-targets/RT/USER/lte-uesoftmodem.c              (Complicated in main())
-
-
-*******************************************************************************************************
-*Below is the pending list of files with conflicts that remain to be resolved                         *
-*******************************************************************************************************
-
-	deleted by them: openair1/PHY/TOOLS/file_output.c
-	deleted by them: openair1/SCHED/pusch_pc.c		
-	deleted by them: openair2/UTIL/LOG/log.c
-	deleted by them: openair2/UTIL/LOG/log.h
-	deleted by them: targets/RT/USER/lte-ran.c 
-	deleted by them: targets/SIMU/USER/channel_sim.c (Shouldn't remove that)
-
-
-
-*******************************************************************************************************
-*Below is the initial list of files with conflicts right after the merge                              *
-*******************************************************************************************************
-
-	both modified:   cmake_targets/CMakeLists.txt
-	both modified:   common/config/config_cmdline.c
-	both modified:   common/config/config_userapi.c
-	both added:      d2d_emulator_setup.txt
-	both modified:   nfapi/oai_integration/nfapi_pnf.c
-	both modified:   nfapi/open-nFAPI/vnf/src/vnf_p7.c
-	both modified:   openair1/PHY/INIT/lte_init.c
-	both modified:   openair1/PHY/INIT/lte_init_ue.c
-	both modified:   openair1/PHY/LTE_ESTIMATION/lte_sync_time.c
-	both modified:   openair1/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
-	both modified:   openair1/PHY/LTE_TRANSPORT/dci.c
-	both modified:   openair1/PHY/LTE_TRANSPORT/dci_tools.c
-	both modified:   openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
-	both modified:   openair1/PHY/LTE_TRANSPORT/pbch.c
-	both modified:   openair1/PHY/LTE_TRANSPORT/prach.c
-	both modified:   openair1/PHY/LTE_TRANSPORT/transport_eNB.h
-	both modified:   openair1/PHY/LTE_TRANSPORT/ulsch_demodulation.c
-	both modified:   openair1/PHY/LTE_UE_TRANSPORT/transport_proto_ue.h
-	both modified:   openair1/PHY/MODULATION/slot_fep_ul.c
-	deleted by them: openair1/PHY/TOOLS/file_output.c
-	both modified:   openair1/PHY/defs_eNB.h
-	both modified:   openair1/PHY/impl_defs_lte.h
-	both modified:   openair1/PHY/phy_vars.h
-	both modified:   openair1/SCHED/fapi_l1.c
-	both modified:   openair1/SCHED/phy_procedures_lte_eNb.c
-	deleted by them: openair1/SCHED/pusch_pc.c
-	both modified:   openair1/SCHED/sched_common.h
-	both modified:   openair1/SCHED_UE/phy_procedures_lte_ue.c
-	both modified:   openair1/SIMULATION/ETH_TRANSPORT/multicast_link.c
-	both modified:   openair1/SIMULATION/LTE_PHY/dlsim.c
-	both modified:   openair2/COMMON/mac_rrc_primitives.h
-	both modified:   openair2/COMMON/platform_types.h               
-	both modified:   openair2/COMMON/rrc_messages_types.h		
-	both modified:   openair2/ENB_APP/enb_config.c
-	both modified:   openair2/ENB_APP/enb_paramdef.h
-	both modified:   openair2/ENB_APP/flexran_agent_ran_api.c
-	both modified:   openair2/LAYER2/MAC/config.c
-	both modified:   openair2/LAYER2/MAC/config_ue.c
-	both modified:   openair2/LAYER2/MAC/eNB_scheduler.c
-	both modified:   openair2/LAYER2/MAC/eNB_scheduler_RA.c
-	both modified:   openair2/LAYER2/MAC/eNB_scheduler_dlsch.c
-	both modified:   openair2/LAYER2/MAC/eNB_scheduler_mch.c
-	both modified:   openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
-	both modified:   openair2/LAYER2/MAC/mac.h			
-	both modified:   openair2/LAYER2/MAC/mac_proto.h
-	both modified:   openair2/LAYER2/MAC/pre_processor.c	        
-	both modified:   openair2/LAYER2/MAC/ra_procedures.c
-	both modified:   openair2/LAYER2/MAC/ue_procedures.c
-	both modified:   openair2/LAYER2/PDCP_v10.1.0/pdcp.c
-	both modified:   openair2/LAYER2/PDCP_v10.1.0/pdcp.h		
-	both modified:   openair2/LAYER2/PDCP_v10.1.0/pdcp_fifo.c
-	both modified:   openair2/LAYER2/PDCP_v10.1.0/pdcp_proto_extern.h
-	both modified:   openair2/LAYER2/RLC/UM_v9.3.0/rlc_um.c
-	both modified:   openair2/LAYER2/RLC/UM_v9.3.0/rlc_um.h
-	both modified:   openair2/LAYER2/RLC/UM_v9.3.0/rlc_um_control_primitives.c
-	both modified:   openair2/LAYER2/RLC/UM_v9.3.0/rlc_um_control_primitives.h
-	both modified:   openair2/LAYER2/RLC/rlc.c
-	both modified:   openair2/LAYER2/RLC/rlc.h
-	both modified:   openair2/LAYER2/RLC/rlc_mac.c
-	both modified:   openair2/LAYER2/RLC/rlc_mpls.c
-	both modified:   openair2/LAYER2/RLC/rlc_rrc.c		    
-	both modified:   openair2/NETWORK_DRIVER/UE_IP/common.c
-	both modified:   openair2/NETWORK_DRIVER/UE_IP/device.c
-	both modified:   openair2/NETWORK_DRIVER/UE_IP/local.h
-	both modified:   openair2/PHY_INTERFACE/IF_Module.c
-	both added:      openair2/PHY_INTERFACE/UE_MAC_interface.h
-	both added:      openair2/PHY_INTERFACE/phy_stub_UE.c
-	both added:      openair2/PHY_INTERFACE/phy_stub_UE.h
-	both modified:   openair2/RRC/LTE/L2_interface.c
-	both modified:   openair2/RRC/LTE/L2_interface_ue.c		    
-	both modified:   openair2/RRC/LTE/MESSAGES/asn1_msg.c
-	both modified:   openair2/RRC/LTE/MESSAGES/asn1_msg.h
-	both modified:   openair2/RRC/LTE/rrc_UE.c		   
-	both modified:   openair2/RRC/LTE/rrc_defs.h
-	both modified:   openair2/RRC/LTE/rrc_eNB.c
-	both modified:   openair2/RRC/LTE/rrc_proto.h
-	deleted by them: openair2/UTIL/LOG/log.c
-	deleted by them: openair2/UTIL/LOG/log.h
-	both modified:   openair3/GTPV1-U/gtpv1u_eNB.c
-	both modified:   targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
-	both added:      targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210-d2d.conf
-	both modified:   targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf
-	both added:      targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi-STUB.conf
-	both modified:   targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.50PRB.nfapi.conf
-	both modified:   targets/RT/USER/lte-enb.c
-	deleted by them: targets/RT/USER/lte-ran.c
-	both modified:   targets/RT/USER/lte-ru.c
-	both modified:   targets/RT/USER/lte-softmodem.c
-	both modified:   targets/RT/USER/lte-softmodem.h        
-	both modified:   targets/RT/USER/lte-ue.c				
-	both modified:   targets/RT/USER/lte-uesoftmodem.c          #Conflicts solved up to here
-	deleted by them: targets/SIMU/USER/channel_sim.c (Shouldn't remove that)
-
-Changes not staged for commit:
-  (use "git add <file>..." to update what will be committed)
-  (use "git checkout -- <file>..." to discard changes in working directory)
-
-	modified:   openair1/PHY/LTE_UE_TRANSPORT/pbch_ue.c
-	modified:   openair1/PHY/defs_UE.h
-	modified:   openair1/PHY/defs_common.h
-
-Untracked files:
-  (use "git add <file>..." to include in what will be committed)
-
-	.cproject
-	.project
-	diff_merge_develop.patch
-

README.txt

@@ -9,36 +9,26 @@ Please see NOTICE.txt for third party software that is included in the sources.
 The OpenAirInterface (OAI) software is composed of the following parts: 
 
 openairinterface5g
-├── ci-scripts: Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
-├── cmake_targets: Build utilities to compile (simulation, emulation and real-time platforms), and generated build files
-├── common : Some common OAI utilities, other tools can be found at openair2/UTILS
-├── doc : Contains an up-to-date feature set list
+├── cmake_targets: build utilities to compile (simulation, emulation and real-time platforms), and generated build files
+├── common : some common OAI utilities, other tools can be found at openair2/UTILS
 ├── LICENSE
-├── maketags : Script to generate emacs tags
-├── nfapi : Contains the NFAPI code. A local Readme file provides more details.
-├── openair1 : 3GPP LTE Rel-10/12 PHY layer + PHY RF simulation. A local Readme file provides more details.
-├── openair2 : 3GPP LTE Rel-10 RLC/MAC/PDCP/RRC/X2AP implementation. 
-    ├── COMMON
-    ├── DOCS
-    ├── ENB_APP
+├── maketags : script to generate emacs tags
+├── openair1 : 3GPP LTE Rel-10 PHY layer + PHY RF simulation and a subset of Rel 12 Features.
+├── openair2 :3GPP LTE Rel-10 RLC/MAC/PDCP/RRC/X2AP implementation. 
     ├── LAYER2/RLC/ with the following subdirectories: UM_v9.3.0, TM_v9.3.0, and AM_v9.3.0. 
-    ├── LAYER2/PDCP/PDCP_v10.1.0.
-    ├── NETWORK_DRIVER
-    ├── PHY_INTERFACE
+    ├── LAYER2/PDCP/PDCP_v10.1.0. 
     ├── RRC/LITE
-    ├── UTIL
+    ├── PHY_INTERFACE
     ├── X2AP
+    ├── ENB_APP 
 ├── openair3: 3GPP LTE Rel10 for S1AP, NAS GTPV1-U for both ENB and UE.
-    ├── COMMON
-    ├── DOCS
     ├── GTPV1-U
-    ├── NAS
+    ├── NAS 
     ├── S1AP
     ├── SCTP
     ├── SECU
     ├── UDP
-    ├── UTILS
-└── targets: Top-level wrappers for unitary simulation for PHY channels, system-level emulation (eNB-UE with and without S1), and realtime eNB and UE and RRH GW.
+└── targets: top level wrapper for unitary simulation for PHY channels, system-level emulation (eNB-UE with and without S1), and realtime eNB and UE and RRH GW.
 
 
 RELEASE NOTES:
@@ -54,12 +44,3 @@ v0.6 -> RRH functionality, UE greatly improved, better TDD support,
         a lot of bugs fixed. WARNING: oaisim in PHY abstraction mode does not
         work, you need to use v0.5.2 for that.
 v0.6.1 -> Mostly bugfixes. This is the last version without NFAPI.
-v1.0.0 -> January 2019. This version first implements the architectural split described in doc/oai_lte_enb_func_split_arch.png picture.
-            Only FAPI, nFAPI and IF4.5 interfaces are implemented.
-            Repository tree structure prepares future integrations of features such as LTE-M, nbIOT or 5G-NR.
-            Preliminary X2 support has been implemented.
-            S1-flex has been introduced.
-            New tools: config library, telnet server, ...
-            A lot of bugfixes and a proper automated Continuous Integration process validates contributions.
-v1.0.1 -> February 2019: Bug fix for the UE L1 simulator.
-v1.0.2 -> February 2019: Full OAI support for 3.13.1 UHD

ci-scripts/Jenkinsfile-gitlab

@@ -31,7 +31,6 @@ def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
 }
 
 def doRedHatBuild = false
-def doFlexranCtrlTest = false
 
 pipeline {
     agent {
@@ -41,7 +40,7 @@ pipeline {
         disableConcurrentBuilds()
         timestamps()
         gitLabConnection('OAI GitLab')
-        gitlabBuilds(builds: ["Build eNb-USRP", "Build basic-sim", "Build phy-sim", "Build eNb-ethernet", "Build UE-ethernet", "Analysis with cppcheck", "Test phy-sim", "Test basic-sim", "Test L2-sim", "Test-FDD-Band7", "Test-TDD-Band40", "Test-IF4p5-FDD-Band7", "Test-IF4p5-TDD-Band40"])
+        gitlabBuilds(builds: ["Build eNb-USRP", "Build basic-sim", "Build phy-sim", "Build eNb-ethernet", "Build UE-ethernet", "Analysis with cppcheck", "Test phy-sim", "Test basic-sim", "Test-FDD-Band7", "Test-TDD-Band40", "Test-IF4p5-FDD-Band7", "Test-IF4p5-TDD-Band40"])
         ansiColor('xterm')
     }
 
@@ -70,12 +69,6 @@ pipeline {
                     } else {
                         doRedHatBuild = false
                     }
-                    if (params.FlexRanRtcGitLabRepository_Credentials != null) {
-                        doFlexranCtrlTest = true
-                    }
-                    if (fileExists("flexran")) {
-                        sh "rm -Rf flexran > /dev/null 2>&1"
-                    }
                 }
             }
         }
@@ -104,25 +97,12 @@ pipeline {
                     } else {
                         echo "Git Branch      is ${GIT_BRANCH}"
                         echo "Git Commit      is ${GIT_COMMIT}"
-                        sh "git log -n1 --pretty=format:\"%s\" > .git/CI_COMMIT_MSG"
 
                         sh "zip -r -qq localZip.zip ."
                         // Running astyle options on all C/H files in the repository
                         // For the moment, there is no fail criteria. Just a notification of number of files that do not follow
                         sh "./ci-scripts/checkCodingFormattingRules.sh"
                     }
-                    if (doFlexranCtrlTest) {
-                        sh "mkdir flexran"
-                        dir ('flexran') {
-                            withCredentials([
-                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.FlexRanRtcGitLabRepository_Credentials}", usernameVariable: 'git_username', passwordVariable: 'git_password']
-                                ]) {
-                                sh "git clone https://${git_username}:${git_password}@gitlab.eurecom.fr/flexran/flexran-rtc.git . > ../git_clone.log 2>&1"
-                            }
-                            sh "sed -i -e 's#add-apt-repository.*cleishm.*neo4j#add-apt-repository ppa:cleishm/neo4j -y#' -e 's#libneo4j-client-dev#libneo4j-client-dev -y#' tools/install_dependencies"
-                            sh "zip -r -qq flexran.zip ."
-                        }
-                    }
                 }
             }
             post {
@@ -135,10 +115,10 @@ pipeline {
             }
         }
 
-        stage ("Start VM -- basic-sim") {
+        stage ("Start VM -- cppcheck") {
             steps {
                 timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
+                    sh "./ci-scripts/createVM.sh --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                 }
             }
         }
@@ -146,31 +126,15 @@ pipeline {
         stage ("Start VM -- enb-usrp") {
             steps {
                 timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
+                    sh "./ci-scripts/createVM.sh --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                 }
             }
         }
 
-        stage ("Start VM -- enb-ethernet") {
+        stage ("Start VM -- basic-sim") {
             steps {
                 timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
-                }
-            }
-        }
-
-        stage ("Start VM -- ue-ethernet") {
-            steps {
-                timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
-                }
-            }
-        }
-
-        stage ("Start VM -- L2-Sim") {
-            steps {
-                timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant l2-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
+                    sh "./ci-scripts/createVM.sh --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                 }
             }
         }
@@ -178,15 +142,23 @@ pipeline {
         stage ("Start VM -- phy-sim") {
             steps {
                 timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
+                    sh "./ci-scripts/createVM.sh --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                 }
             }
         }
 
-        stage ("Start VM -- cppcheck") {
+        stage ("Start VM -- enb-ethernet") {
             steps {
                 timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
+                    sh "./ci-scripts/createVM.sh --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                }
+            }
+        }
+
+        stage ("Start VM -- ue-ethernet") {
+            steps {
+                timeout (time: 5, unit: 'MINUTES') {
+                    sh "./ci-scripts/createVM.sh --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                 }
             }
         }
@@ -197,7 +169,7 @@ pipeline {
                     steps {
                         gitlabCommitStatus(name: "Analysis with cppcheck") {
                             timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                             }
                         }
                     }
@@ -206,7 +178,7 @@ pipeline {
                     steps {
                         gitlabCommitStatus(name: "Build eNb-USRP") {
                             timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                             }
                         }
                     }
@@ -215,7 +187,16 @@ pipeline {
                     steps {
                         gitlabCommitStatus(name: "Build basic-sim") {
                             timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                            }
+                        }
+                    }
+                }
+                stage ("Build physical simulators") {
+                    steps {
+                        gitlabCommitStatus(name: "Build phy-sim") {
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
                     }
@@ -224,7 +205,7 @@ pipeline {
                     steps {
                         gitlabCommitStatus(name: "Build eNb-ethernet") {
                             timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
                     }
@@ -233,25 +214,7 @@ pipeline {
                     steps {
                         gitlabCommitStatus(name: "Build UE-ethernet") {
                             timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
-                            }
-                        }
-                    }
-                }
-                stage ("Build L2-Simulator-eNB") {
-                    steps {
-                        //gitlabCommitStatus(name: "Build UE-ethernet") {
-                            timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant l2-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
-                            }
-                        //}
-                    }
-                }
-                stage ("Build physical simulators") {
-                    steps {
-                        gitlabCommitStatus(name: "Build phy-sim") {
-                            timeout (time: 20, unit: 'MINUTES') {
-                               sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                                sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
                     }
@@ -261,7 +224,7 @@ pipeline {
                         expression {doRedHatBuild}
                     }
                     steps {
-                        gitlabCommitStatus(name: "Build eNb-USRP-RHE") {
+                        gitlabCommitStatus(name: "Build eNb-USRP-CentOS") {
                             script {
                                 try {
                                     withCredentials([
@@ -289,7 +252,7 @@ pipeline {
                             archiveArtifacts artifacts: 'archives/vm_build_logs.zip'
                         }
                         if ("MERGE".equals(env.gitlabActionType)) {
-                            sh "./ci-scripts/oai-ci-vm-tool report-build --workspace $WORKSPACE --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+                            sh "./ci-scripts/reportBuildLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
                             sh "./ci-scripts/checkAddedWarnings.sh --src-branch ${env.gitlabSourceBranch} --target-branch ${env.gitlabTargetBranch}"
                             def res=readFile('./oai_warning_files.txt').trim();
                             if ("0".equals(res)) {
@@ -300,7 +263,7 @@ pipeline {
                                 addGitLabMRComment comment: message
                             }
                         } else {
-                            sh "./ci-scripts/oai-ci-vm-tool report-build --workspace $WORKSPACE --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
+                            sh "./ci-scripts/reportBuildLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
                         }
                         if(fileExists('build_results.html')) {
                             sh "sed -i -e 's#Build-ID: ${BUILD_ID}#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' build_results.html"
@@ -317,7 +280,7 @@ pipeline {
                     steps {
                         gitlabCommitStatus(name: "Test phy-sim") {
                             timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool test --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                                sh "./ci-scripts/runTestOnVM.sh --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                             }
                         }
                     }
@@ -325,205 +288,206 @@ pipeline {
                 stage ("Test basic simulator") {
                     steps {
                         gitlabCommitStatus(name: "Test basic-sim") {
-                            timeout (time: 30, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool test --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                            timeout (time: 20, unit: 'MINUTES') {
+                                sh "./ci-scripts/runTestOnVM.sh --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
                     }
                 }
-                stage ("Test L2 simulator") {
-                    steps {
-                        gitlabCommitStatus(name: "Test L2-sim") {
-                            timeout (time: 30, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool test --workspace $WORKSPACE --variant l2-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
-                            }
-                        }
-                    }
-                }
-                stage ("Build Flexran Controller") {
-                    when {
-                        expression {doFlexranCtrlTest}
-                    }
-                    steps {
-                        timeout (time: 20, unit: 'MINUTES') {
-                            sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant flexran-rtc --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
-                        }
-                    }
-                }
-                stage ("Test FDD - Band 7 - B210") {
-                    steps {
-                        script {
-                            if ("MERGE".equals(env.gitlabActionType)) {
-                                gitlabCommitStatus(name: "Test-FDD-Band7") {
-                                    build job: 'eNB-CI-FDD-Band7-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: true)
-                                       ]
-                                }
-                            } else {
-                                gitlabCommitStatus(name: "Test-FDD-Band7") {
-                                    build job: 'eNB-CI-FDD-Band7-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: false)
-                                       ]
+                stage ("Test on CI bench #1") {
+                    stages {
+                        stage ("Test FDD - Band 7 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-FDD-Band7") {
+                                                build job: 'eNB-CI-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-FDD-Band7") {
+                                                build job: 'eNB-CI-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
                                 }
                             }
-                        }
-                    }
-                    post {
-                        // In case of any non-success, we are retrieving the HTML report of the last completed
-                        // slave job.
-                        // The only drop-back is that we may retrieve the HTML report of a previous build
-                        always {
-                            script {
-                                if (!fileExists('test_results-eNB-CI-FDD-Band7-B210.html')) {
-                                    copyArtifacts(projectName: 'eNB-CI-FDD-Band7-B210',
-                                                  filter: 'test_results*.html',
-                                                  selector: lastCompleted())
-                                    if (fileExists('test_results-eNB-CI-FDD-Band7-B210.html')) {
-                                        sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-FDD-Band7-B210.html"
-                                        archiveArtifacts artifacts: 'test_results-eNB-CI-FDD-Band7-B210.html'
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-FDD-Band7-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-FDD-Band7-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-FDD-Band7-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-FDD-Band7-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-FDD-Band7-B210.html'
+                                            }
+                                        }
                                     }
                                 }
                             }
                         }
-                    }
-                }
-                stage ("Test TDD - Band 40 - B210") {
-                    steps {
-                        script {
-                            if ("MERGE".equals(env.gitlabActionType)) {
-                                gitlabCommitStatus(name: "Test-TDD-Band40") {
-                                    build job: 'eNB-CI-TDD-Band40-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: true)
-                                       ]
-                                }
-                            } else {
-                                gitlabCommitStatus(name: "Test-TDD-Band40") {
-                                    build job: 'eNB-CI-TDD-Band40-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: false)
-                                       ]
+                        stage ("Test TDD - Band 40 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-TDD-Band40") {
+                                                build job: 'eNB-CI-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-TDD-Band40") {
+                                                build job: 'eNB-CI-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
                                 }
                             }
-                        }
-                    }
-                    post {
-                        // In case of any non-success, we are retrieving the HTML report of the last completed
-                        // slave job.
-                        // The only drop-back is that we may retrieve the HTML report of a previous build
-                        always {
-                            script {
-                                if (!fileExists('test_results-eNB-CI-TDD-Band40-B210.html')) {
-                                    copyArtifacts(projectName: 'eNB-CI-TDD-Band40-B210',
-                                                  filter: 'test_results*.html',
-                                                  selector: lastCompleted())
-                                    if (fileExists('test_results-eNB-CI-TDD-Band40-B210.html')) {
-                                        sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-TDD-Band40-B210.html"
-                                        archiveArtifacts artifacts: 'test_results-eNB-CI-TDD-Band40-B210.html'
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-TDD-Band40-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-TDD-Band40-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-TDD-Band40-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-TDD-Band40-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-TDD-Band40-B210.html'
+                                            }
+                                        }
                                     }
                                 }
                             }
                         }
-                    }
-                }
-                stage ("Test IF4p5 - FDD - Band 7 - B210") {
-                    steps {
-                        script {
-                            if ("MERGE".equals(env.gitlabActionType)) {
-                                gitlabCommitStatus(name: "Test-IF4p5-FDD-Band7") {
-                                    build job: 'eNB-CI-IF4p5-FDD-Band7-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: true)
-                                       ]
-                                }
-                            } else {
-                                gitlabCommitStatus(name: "Test-IF4p5-FDD-Band7") {
-                                    build job: 'eNB-CI-IF4p5-FDD-Band7-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: false)
-                                       ]
+                        stage ("Test IF4p5 - FDD - Band 7 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-IF4p5-FDD-Band7") {
+                                                build job: 'eNB-CI-IF4p5-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-IF4p5-FDD-Band7") {
+                                                build job: 'eNB-CI-IF4p5-FDD-Band7-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
                                 }
                             }
-                        }
-                    }
-                    post {
-                        // In case of any non-success, we are retrieving the HTML report of the last completed
-                        // slave job.
-                        // The only drop-back is that we may retrieve the HTML report of a previous build
-                        always {
-                            script {
-                                if (!fileExists('test_results-eNB-CI-IF4p5-FDD-Band7-B210.html')) {
-                                    copyArtifacts(projectName: 'eNB-CI-IF4p5-FDD-Band7-B210',
-                                                  filter: 'test_results*.html',
-                                                  selector: lastCompleted())
-                                    if (fileExists('test_results-eNB-CI-IF4p5-FDD-Band7-B210.html')) {
-                                        sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-IF4p5-FDD-Band7-B210.html"
-                                        archiveArtifacts artifacts: 'test_results-eNB-CI-IF4p5-FDD-Band7-B210.html'
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-IF4p5-FDD-Band7-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-IF4p5-FDD-Band7-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-IF4p5-FDD-Band7-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-IF4p5-FDD-Band7-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-IF4p5-FDD-Band7-B210.html'
+                                            }
+                                        }
                                     }
                                 }
                             }
                         }
-                    }
-                }
-                stage ("Test IF4p5 - TDD - Band 40 - B210") {
-                    steps {
-                        script {
-                            if ("MERGE".equals(env.gitlabActionType)) {
-                                gitlabCommitStatus(name: "Test-IF4p5-TDD-Band40") {
-                                    build job: 'eNB-CI-IF4p5-TDD-Band40-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: true)
-                                       ]
-                                }
-                            } else {
-                                gitlabCommitStatus(name: "Test-IF4p5-TDD-Band40") {
-                                    build job: 'eNB-CI-IF4p5-TDD-Band40-B210',
-                                       parameters: [
-                                           string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-                                           string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
-                                           string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
-                                           booleanParam(name: 'eNB_mergeRequest', value: false)
-                                       ]
+                        stage ("Test IF4p5 - TDD - Band 40 - B210") {
+                            steps {
+                                script {
+                                    try {
+                                        if ("MERGE".equals(env.gitlabActionType)) {
+                                            gitlabCommitStatus(name: "Test-IF4p5-TDD-Band40") {
+                                                build job: 'eNB-CI-IF4p5-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: true)
+                                                   ]
+                                            }
+                                        } else {
+                                            gitlabCommitStatus(name: "Test-IF4p5-TDD-Band40") {
+                                                build job: 'eNB-CI-IF4p5-TDD-Band40-B210',
+                                                   parameters: [
+                                                       string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                                                       string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                                                       string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                                                       booleanParam(name: 'eNB_mergeRequest', value: false)
+                                                   ]
+                                            }
+                                        }
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                    }
                                 }
                             }
-                        }
-                    }
-                    post {
-                        // In case of any non-success, we are retrieving the HTML report of the last completed
-                        // slave job.
-                        // The only drop-back is that we may retrieve the HTML report of a previous build
-                        always {
-                            script {
-                                if (!fileExists('test_results-eNB-CI-IF4p5-TDD-Band40-B210.html')) {
-                                    copyArtifacts(projectName: 'eNB-CI-IF4p5-TDD-Band40-B210',
-                                                  filter: 'test_results*.html',
-                                                  selector: lastCompleted())
-                                    if (fileExists('test_results-eNB-CI-IF4p5-TDD-Band40-B210.html')) {
-                                        sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-IF4p5-TDD-Band40-B210.html"
-                                        archiveArtifacts artifacts: 'test_results-eNB-CI-IF4p5-TDD-Band40-B210.html'
+                            post {
+                                // In case of any non-success, we are retrieving the HTML report of the last completed
+                                // slave job.
+                                // The only drop-back is that we may retrieve the HTML report of a previous build
+                                always {
+                                    script {
+                                        if (!fileExists('test_results-eNB-CI-IF4p5-TDD-Band40-B210.html')) {
+                                            copyArtifacts(projectName: 'eNB-CI-IF4p5-TDD-Band40-B210',
+                                                          filter: 'test_results*.html',
+                                                          selector: lastCompleted())
+                                            if (fileExists('test_results-eNB-CI-IF4p5-TDD-Band40-B210.html')) {
+                                                sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-eNB-CI-IF4p5-TDD-Band40-B210.html"
+                                                archiveArtifacts artifacts: 'test_results-eNB-CI-IF4p5-TDD-Band40-B210.html'
+                                            }
+                                        }
                                     }
                                 }
                             }
@@ -535,14 +499,14 @@ pipeline {
                 always {
                     script {
                         dir ('archives') {
-                            sh "if [ -d basic_sim/test ] || [ -d phy_sim/test ] || [ -d l2_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
+                            sh "if [ -d basic_sim/test ] || [ -d phy_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
                         }
                         if(fileExists('archives/vm_tests_logs.zip')) {
                             archiveArtifacts artifacts: 'archives/vm_tests_logs.zip'
                             if ("MERGE".equals(env.gitlabActionType)) {
-                                sh "./ci-scripts/oai-ci-vm-tool report-test --workspace $WORKSPACE --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+                                sh "./ci-scripts/reportTestLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
                             } else {
-                                sh "./ci-scripts/oai-ci-vm-tool report-test --workspace $WORKSPACE --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
+                                sh "./ci-scripts/reportTestLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
                             }
                             if(fileExists('test_simulator_results.html')) {
                                 sh "sed -i -e 's#Build-ID: ${BUILD_ID}#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_simulator_results.html"
@@ -555,7 +519,7 @@ pipeline {
         }
         stage ("Destroy all Virtual Machines") {
             steps {
-                sh "./ci-scripts/oai-ci-vm-tool destroy --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                sh "./ci-scripts/destroyAllRunningVM.sh --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
             }
         }
     }
@@ -563,7 +527,7 @@ pipeline {
         always {
             script {
                 // Stage destroy may not be run if error in previous stage
-                sh "./ci-scripts/oai-ci-vm-tool destroy --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
+                sh "./ci-scripts/destroyAllRunningVM.sh --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
                 emailext attachmentsPattern: '*results*.html',
                      body: '''Hi,
 Here are attached HTML report files for $PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!
@@ -573,10 +537,6 @@ OAI CI Team''',
                      replyTo: 'no-reply@openairinterface.org',
                      subject: '$PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!',
                      to: env.gitlabUserEmail
-
-                if (fileExists('.git/CI_COMMIT_MSG')) {
-                    sh "rm -f .git/CI_COMMIT_MSG"
-                }
             }
         }
         success {

ci-scripts/Jenkinsfile-tmp-ran

@@ -27,8 +27,6 @@ def pythonExecutor = params.pythonExecutor
 
 // Location of the test XML file to be run
 def testXMLFile = params.pythonTestXmlFile
-def mainPythonAllXmlFiles = ""
-def buildStageStatus = true
 
 // Name of the test stage
 def testStageName = params.pipelineTestStageName
@@ -55,7 +53,6 @@ def eNB_Repository
 def eNB_Branch
 def eNB_CommitID
 def eNB_AllowMergeRequestProcess = false
-def eNB_TargetBranch
 
 pipeline {
     agent {
@@ -64,7 +61,6 @@ pipeline {
     options {
         disableConcurrentBuilds()
         ansiColor('xterm')
-        lock (ciSmartPhoneResource)
     }
     // the following parameter options are commented out so it shows the ones
     // that you SHALL have to run the job.
@@ -110,14 +106,8 @@ pipeline {
                     if (params.pythonTestXmlFile == null) {
                         // picking default
                         testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
-                        echo "Test XML file(default):   ${testXMLFile}"
-                        mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
                     } else {
-                        String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
-                        for (xmlFile in myXmlTestSuite) {
-                            mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
-                            echo "Test XML file         :   ${xmlFile}"
-                        }
+                        echo "Test XML file         :   ${testXMLFile}"
                     }
                     // If not present picking a default Stage Name
                     if (params.pipelineTestStageName == null) {
@@ -159,14 +149,6 @@ pipeline {
                     echo "eNB_CommitID          :   ${eNB_CommitID}"
                     if (params.eNB_mergeRequest != null) {
                         eNB_AllowMergeRequestProcess = params.eNB_mergeRequest
-                        if (eNB_AllowMergeRequestProcess) {
-                            if (params.eNB_TargetBranch != null) {
-                                eNB_TargetBranch = params.eNB_TargetBranch
-                            } else {
-                                eNB_TargetBranch = 'develop'
-                            }
-                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
-                        }
                     }
 
                     if (params.EPC_IPAddress == null) {
@@ -202,24 +184,20 @@ pipeline {
             steps {
                 script {
                     dir ('ci-scripts') {
-                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
-                        withCredentials([
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
-                        ]) {
-                            sh "python3 main.py --mode=InitiateHtml --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNB_AllowMerge=${eNB_AllowMergeRequestProcess} --eNBTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
-                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
-                            for (xmlFile in myXmlTestSuite) {
-                                try {
-                                    sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNB_AllowMerge=${eNB_AllowMergeRequestProcess} --eNBTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
-                                } catch (Exception e) {
-                                    currentBuild.result = 'FAILURE'
-                                    buildStageStatus = false
-                                }
+                      lock (ciSmartPhoneResource) {
+                        try {
+                            echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                            withCredentials([
+                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                            ]) {
+                                sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNB_AllowMerge=${eNB_AllowMergeRequestProcess} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${testXMLFile}"
                             }
-                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        } catch (Exception e) {
+                            currentBuild.result = 'FAILURE'
                         }
+                      }
                     }
                 }
             }
@@ -350,7 +328,7 @@ pipeline {
                             }
                             if(fileExists("ci-scripts/test_results.html")) {
                                 sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
-                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' test_results-${JOB_NAME}.html"
                                 archiveArtifacts "test_results-${JOB_NAME}.html"
                             }
                         }

ci-scripts/active_net_interfaces.awk

@@ -1,21 +0,0 @@
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
-/inet.*brd/{print "interfaceToUse="$NF"done"}

ci-scripts/buildOnRH.sh

@@ -198,18 +198,12 @@ do
     fi
 done
 
-if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]
-then
-    echo "Expecting $NB_PATTERN_FILES log files and found $NB_FOUND_FILES"
-    STATUS=-1
-fi
+if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]; then STATUS=-1; fi
 
 if [ $STATUS -eq 0 ]
 then
-    echo "BUILD_OK" > $ARCHIVES_LOC/build_final_status.log
     echo "STATUS seems OK"
 else
-    echo "BUILD_KO" > $ARCHIVES_LOC/build_final_status.log
     echo "STATUS failed?"
 fi
 exit $STATUS

ci-scripts/buildOnVM.sh

@@ -20,8 +20,8 @@
 # *      contact@openairinterface.org
 # */
 
-function build_usage {
-    echo "OAI CI VM script"
+function usage {
+    echo "OAI VM Build Check script"
     echo "   Original Author: Raphael Defosseux"
     echo "   Requirements:"
     echo "     -- uvtool uvtool-libvirt apt-cacher"
@@ -31,9 +31,9 @@ function build_usage {
     echo ""
     echo "Usage:"
     echo "------"
-    echo "    oai-ci-vm-tool build [OPTIONS]"
+    echo "    buildOnVM.sh [OPTIONS]"
     echo ""
-    echo "Mandatory Options:"
+    echo "Options:"
     echo "--------"
     echo "    --job-name #### OR -jn ####"
     echo "    Specify the name of the Jenkins job."
@@ -44,175 +44,356 @@ function build_usage {
     echo "    --workspace #### OR -ws ####"
     echo "    Specify the workspace."
     echo ""
-    echo "Options:"
-    echo "--------"
-    variant_usage
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
     echo "    Specify the variant to build."
     echo ""
     echo "    --keep-vm-alive OR -k"
     echo "    Keep the VM alive after the build."
     echo ""
-    echo "    --daemon OR -D"
-    echo "    Run as daemon"
-    echo ""
     echo "    --help OR -h"
     echo "    Print this help message."
     echo ""
 }
 
-function build_on_vm {
-    if [ ! -f $JENKINS_WKSP/localZip.zip ]
-    then
-        echo "Missing localZip.zip file!"
-        STATUS=1
-        return
-    fi
-    if [ ! -f /etc/apt/apt.conf.d/01proxy ]
-    then
-        echo "Missing /etc/apt/apt.conf.d/01proxy file!"
-        echo "Is apt-cacher installed and configured?"
-        STATUS=1
-        return
-    fi
-
-    echo "############################################################"
-    echo "OAI CI VM script"
-    echo "############################################################"
-
-    echo "VM_NAME             = $VM_NAME"
-    echo "VM_CMD_FILE         = $VM_CMDS"
-    echo "JENKINS_WKSP        = $JENKINS_WKSP"
-    echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
-    echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
-
-    IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
-
-    if [ $IS_VM_ALIVE -eq 0 ]
-    then
-        echo "VM_MEMORY           = $VM_MEMORY MBytes"
-        echo "VM_CPU              = $VM_CPU"
-        echo "############################################################"
-        echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
-        echo "############################################################"
-        acquire_vm_create_lock
-        uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
-        echo "Waiting for VM to be started"
-        uvt-kvm wait $VM_NAME --insecure
-
-        VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
-        echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
-        release_vm_create_lock
-    else
-        echo "Waiting for VM to be started"
-        uvt-kvm wait $VM_NAME --insecure
-
-        VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
-        echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
-    fi
-
-    echo "############################################################"
-    echo "Copying GIT repo into VM ($VM_NAME)" 
-    echo "############################################################"
-    if [[ "$VM_NAME" == *"-flexran-rtc"* ]]
-    then
-        scp -o StrictHostKeyChecking=no $JENKINS_WKSP/flexran/flexran.zip ubuntu@$VM_IP_ADDR:/home/ubuntu/localZip.zip
-    else
-        scp -o StrictHostKeyChecking=no $JENKINS_WKSP/localZip.zip ubuntu@$VM_IP_ADDR:/home/ubuntu
-    fi
-    scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$VM_IP_ADDR:/home/ubuntu
-
-    echo "############################################################"
-    echo "Running install and build script on VM ($VM_NAME)"
-    echo "############################################################"
-    echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS
-    echo "touch /home/ubuntu/.hushlogin" >> $VM_CMDS
-    if [[ "$VM_NAME" == *"-cppcheck"* ]]
-    then
-        if [ $DAEMON -eq 0 ]
-        then
-            echo "echo \"sudo apt-get --yes --quiet install zip cppcheck \"" >> $VM_CMDS
-            echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
-            echo "sudo apt-get --yes install zip cppcheck >> zip-install.txt 2>&1" >> $VM_CMDS
-        else
-            echo "echo \"sudo apt-get --yes --quiet install zip daemon cppcheck \"" >> $VM_CMDS
-            echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
-            echo "sudo apt-get --yes install zip daemon cppcheck >> zip-install.txt 2>&1" >> $VM_CMDS
-        fi
-    fi
-    if [[ "$VM_NAME" == *"-flexran-rtc"* ]]
-    then
-        if [ $DAEMON -eq 0 ]
-        then
-            echo "echo \"sudo apt-get --yes --quiet install zip curl jq \"" >> $VM_CMDS
-            echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
-            echo "sudo apt-get --yes install zip curl jq >> zip-install.txt 2>&1" >> $VM_CMDS
-        else
-            echo "echo \"sudo apt-get --yes --quiet install zip daemon curl jq \"" >> $VM_CMDS
-            echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
-            echo "sudo apt-get --yes install zip daemon curl jq >> zip-install.txt 2>&1" >> $VM_CMDS
-        fi
-    fi
-    if [[ "$VM_NAME" != *"-cppcheck"* ]] && [[ "$VM_NAME" != *"-flexran-rtc"* ]]
-    then
-        if [ $DAEMON -eq 0 ]
-        then
-            echo "echo \"sudo apt-get --yes --quiet install zip subversion libboost-dev \"" >> $VM_CMDS
-            echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
-            echo "sudo apt-get --yes install zip subversion libboost-dev >> zip-install.txt 2>&1" >> $VM_CMDS
-        else
-            echo "echo \"sudo apt-get --yes --quiet install zip daemon subversion libboost-dev \"" >> $VM_CMDS
-            echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
-            echo "sudo apt-get --yes install zip daemon subversion libboost-dev >> zip-install.txt 2>&1" >> $VM_CMDS
-        fi
-    fi
-    echo "mkdir tmp" >> $VM_CMDS
-    echo "cd tmp" >> $VM_CMDS
-    echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $VM_CMDS
-    echo "unzip -qq -DD ../localZip.zip" >> $VM_CMDS
-    if [[ "$VM_NAME" == *"-cppcheck"* ]]
-    then
-        echo "mkdir cmake_targets/log" >> $VM_CMDS
-        echo "chmod 777 cmake_targets/log" >> $VM_CMDS
-        echo "cp /home/ubuntu/zip-install.txt cmake_targets/log" >> $VM_CMDS
-        echo "echo \"cppcheck $BUILD_OPTIONS . \"" >> $VM_CMDS
-        if [ $DAEMON -eq 0 ]
-        then
-            echo "cppcheck $BUILD_OPTIONS . 2> cmake_targets/log/cppcheck.xml 1> cmake_targets/log/cppcheck_build.txt" >> $VM_CMDS
-        else
-            echo "echo \"cppcheck $BUILD_OPTIONS .\" > ./my-vm-build.sh" >> $VM_CMDS
-            echo "chmod 775 ./my-vm-build.sh " >> $VM_CMDS
-            echo "sudo -E daemon --inherit --unsafe --name=build_daemon --chdir=/home/ubuntu/tmp -O /home/ubuntu/tmp/cmake_targets/log/cppcheck_build.txt -E /home/ubuntu/tmp/cmake_targets/log/cppcheck.xml ./my-vm-build.sh" >> $VM_CMDS
-        fi
-    fi
-    if [[ "$VM_NAME" == *"-flexran-rtc"* ]]
-    then
-        echo "mkdir -p cmake_targets/log" >> $VM_CMDS
-        echo "chmod 777 cmake_targets/log" >> $VM_CMDS
-        echo "cp /home/ubuntu/zip-install.txt cmake_targets/log" >> $VM_CMDS
-        echo "echo \"./tools/install_dependencies \"" >> $VM_CMDS
-        echo "./tools/install_dependencies > cmake_targets/log/install-build.txt 2>&1" >> $VM_CMDS
-        echo "echo \"$BUILD_OPTIONS \"" >> $VM_CMDS
-        echo "$BUILD_OPTIONS > cmake_targets/log/rt_controller.Rel14.txt 2>&1" >> $VM_CMDS
-    fi
-    if [[ "$VM_NAME" != *"-cppcheck"* ]] && [[ "$VM_NAME" != *"-flexran-rtc"* ]]
-    then
-        echo "echo \"source oaienv\"" >> $VM_CMDS
-        echo "source oaienv" >> $VM_CMDS
-        echo "cd cmake_targets/" >> $VM_CMDS
-        echo "mkdir log" >> $VM_CMDS
-        echo "chmod 777 log" >> $VM_CMDS
-        echo "cp /home/ubuntu/zip-install.txt log" >> $VM_CMDS
-        if [ $DAEMON -eq 0 ]
-        then
-            echo "echo \"./build_oai -I $BUILD_OPTIONS \"" >> $VM_CMDS
-            echo "./build_oai -I $BUILD_OPTIONS > log/install-build.txt 2>&1" >> $VM_CMDS
-        else
-            echo "echo \"./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
-            echo "chmod 775 ./my-vm-build.sh " >> $VM_CMDS
-            echo "echo \"sudo -E daemon --inherit --unsafe --name=build_daemon --chdir=/home/ubuntu/tmp/cmake_targets -o /home/ubuntu/tmp/cmake_targets/log/install-build.txt ./my-vm-build.sh\"" >> $VM_CMDS
-            echo "sudo -E daemon --inherit --unsafe --name=build_daemon --chdir=/home/ubuntu/tmp/cmake_targets -o /home/ubuntu/tmp/cmake_targets/log/install-build.txt ./my-vm-build.sh" >> $VM_CMDS
-        fi
-    fi
-    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
-    rm -f $VM_CMDS
+function variant_usage {
+    echo "OAI VM Build Check script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
+    echo ""
 }
+
+if [ $# -lt 1 ] || [ $# -gt 9 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+VM_TEMPLATE=ci-
+JOB_NAME=XX
+BUILD_ID=XX
+VM_NAME=ci-enb-usrp
+VM_MEMORY=2048
+VM_CPU=4
+ARCHIVES_LOC=enb_usrp
+LOG_PATTERN=.Rel14.txt
+NB_PATTERN_FILES=4
+BUILD_OPTIONS="--eNB -w USRP"
+KEEP_VM_ALIVE=0
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    shift
+    shift
+    ;;
+    -ws|--workspace)
+    JENKINS_WKSP="$2"
+    shift
+    shift
+    ;;
+    -k|--keep-vm-alive)
+    KEEP_VM_ALIVE=1
+    shift
+    ;;
+    -v1)
+    VM_NAME=ci-enb-usrp
+    ARCHIVES_LOC=enb_usrp
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=4
+    BUILD_OPTIONS="--eNB -w USRP --mu"
+    shift
+    ;;
+    -v2)
+    VM_NAME=ci-basic-sim
+    ARCHIVES_LOC=basic_sim
+    LOG_PATTERN=basic_simulator
+    NB_PATTERN_FILES=2
+    BUILD_OPTIONS="--basic-simulator"
+    VM_MEMORY=8192
+    VM_CPU=4
+    shift
+    ;;
+    -v3)
+    VM_NAME=ci-phy-sim
+    ARCHIVES_LOC=phy_sim
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=3
+    BUILD_OPTIONS="--phy_simulators"
+    shift
+    ;;
+    -v4)
+    VM_NAME=ci-cppcheck
+    VM_MEMORY=4096
+    ARCHIVES_LOC=cppcheck
+    LOG_PATTERN=cppcheck.xml
+    NB_PATTERN_FILES=1
+    BUILD_OPTIONS="--enable=warning --force --xml --xml-version=2"
+    shift
+    ;;
+    -v7)
+    VM_NAME=ci-enb-ethernet
+    ARCHIVES_LOC=enb_eth
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=6
+    BUILD_OPTIONS="--eNB -t ETHERNET --noS1"
+    shift
+    ;;
+    -v8)
+    VM_NAME=ci-ue-ethernet
+    ARCHIVES_LOC=ue_eth
+    LOG_PATTERN=.Rel14.txt
+    NB_PATTERN_FILES=6
+    BUILD_OPTIONS="--UE -t ETHERNET --noS1"
+    shift
+    ;;
+    --variant)
+    variant="$2"
+    case $variant in
+        enb-usrp)
+        VM_NAME=ci-enb-usrp
+        ARCHIVES_LOC=enb_usrp
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=4
+        BUILD_OPTIONS="--eNB -w USRP --mu"
+        ;;
+        basic-sim)
+        VM_NAME=ci-basic-sim
+        ARCHIVES_LOC=basic_sim
+        LOG_PATTERN=basic_simulator
+        NB_PATTERN_FILES=2
+        BUILD_OPTIONS="--basic-simulator"
+        VM_MEMORY=8192
+        VM_CPU=4
+        ;;
+        phy-sim)
+        VM_NAME=ci-phy-sim
+        ARCHIVES_LOC=phy_sim
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=3
+        BUILD_OPTIONS="--phy_simulators"
+        ;;
+        cppcheck)
+        VM_NAME=ci-cppcheck
+        VM_MEMORY=4096
+        ARCHIVES_LOC=cppcheck
+        LOG_PATTERN=cppcheck.xml
+        NB_PATTERN_FILES=1
+        BUILD_OPTIONS="--enable=warning --force --xml --xml-version=2"
+        ;;
+        enb-ethernet)
+        VM_NAME=ci-enb-ethernet
+        ARCHIVES_LOC=enb_eth
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=6
+        BUILD_OPTIONS="--eNB -t ETHERNET --noS1"
+        ;;
+        ue-ethernet)
+        VM_NAME=ci-ue-ethernet
+        ARCHIVES_LOC=ue_eth
+        LOG_PATTERN=.Rel14.txt
+        NB_PATTERN_FILES=6
+        BUILD_OPTIONS="--UE -t ETHERNET --noS1"
+        ;;
+        *)
+        echo ""
+        echo "Syntax Error: Invalid Variant option -> $variant"
+        echo ""
+        variant_usage
+        exit 1
+    esac
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+if [ ! -f $JENKINS_WKSP/localZip.zip ]
+then
+    echo "Missing localZip.zip file!"
+    exit 1
+fi
+if [ ! -f /etc/apt/apt.conf.d/01proxy ]
+then
+    echo "Missing /etc/apt/apt.conf.d/01proxy file!"
+    echo "Is apt-cacher installed and configured?"
+    exit 1
+fi
+
+if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
+then
+    VM_TEMPLATE=ci-
+else
+    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
+fi
+
+VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
+VM_CMDS=${VM_NAME}_cmds.txt
+ARCHIVES_LOC=${JENKINS_WKSP}/archives/${ARCHIVES_LOC}
+
+echo "VM_NAME             = $VM_NAME"
+echo "VM_CMD_FILE         = $VM_CMDS"
+echo "JENKINS_WKSP        = $JENKINS_WKSP"
+echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
+echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
+
+IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
+
+if [ $IS_VM_ALIVE -eq 0 ]
+then
+    echo "############################################################"
+    echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
+    echo "############################################################"
+    uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
+fi
+
+echo "Waiting for VM to be started"
+uvt-kvm wait $VM_NAME --insecure
+
+VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
+echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
+
+echo "############################################################"
+echo "Copying GIT repo into VM ($VM_NAME)" 
+echo "############################################################"
+scp -o StrictHostKeyChecking=no localZip.zip ubuntu@$VM_IP_ADDR:/home/ubuntu
+scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$VM_IP_ADDR:/home/ubuntu
+
+echo "############################################################"
+echo "Running install and build script on VM ($VM_NAME)"
+echo "############################################################"
+echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS
+echo "touch /home/ubuntu/.hushlogin" >> $VM_CMDS
+if [[ "$VM_NAME" == *"-cppcheck"* ]]
+then
+    echo "echo \"sudo apt-get --yes --quiet install zip cppcheck \"" >> $VM_CMDS
+    echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
+    echo "sudo apt-get --yes install zip cppcheck >> zip-install.txt 2>&1" >> $VM_CMDS
+else
+    echo "echo \"sudo apt-get --yes --quiet install zip subversion libboost-dev \"" >> $VM_CMDS
+    echo "sudo apt-get update > zip-install.txt 2>&1" >> $VM_CMDS
+    echo "sudo apt-get --yes install zip subversion libboost-dev >> zip-install.txt 2>&1" >> $VM_CMDS
+fi
+echo "mkdir tmp" >> $VM_CMDS
+echo "cd tmp" >> $VM_CMDS
+echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $VM_CMDS
+echo "unzip -qq -DD ../localZip.zip" >> $VM_CMDS
+if [[ "$VM_NAME" == *"-cppcheck"* ]]
+then
+    echo "mkdir cmake_targets/log" >> $VM_CMDS
+    echo "cp /home/ubuntu/zip-install.txt cmake_targets/log" >> $VM_CMDS
+    echo "echo \"cppcheck $BUILD_OPTIONS . \"" >> $VM_CMDS
+    echo "cppcheck $BUILD_OPTIONS . 2> cmake_targets/log/cppcheck.xml 1> cmake_targets/log/cppcheck_build.txt" >> $VM_CMDS
+else
+    echo "echo \"source oaienv\"" >> $VM_CMDS
+    echo "source oaienv" >> $VM_CMDS
+    echo "cd cmake_targets/" >> $VM_CMDS
+    echo "mkdir log" >> $VM_CMDS
+    echo "cp /home/ubuntu/zip-install.txt log" >> $VM_CMDS
+    echo "echo \"./build_oai -I $BUILD_OPTIONS \"" >> $VM_CMDS
+    echo "./build_oai -I $BUILD_OPTIONS > log/install-build.txt 2>&1" >> $VM_CMDS
+fi
+ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
+
+echo "############################################################"
+echo "Creating a tmp folder to store results and artifacts"
+echo "############################################################"
+if [ ! -d $JENKINS_WKSP/archives ]
+then
+    mkdir $JENKINS_WKSP/archives
+fi
+
+if [ ! -d $ARCHIVES_LOC ]
+then
+    mkdir $ARCHIVES_LOC
+fi
+
+scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.txt $ARCHIVES_LOC
+if [[ "$VM_NAME" == *"-cppcheck"* ]]
+then
+    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.xml $ARCHIVES_LOC
+fi
+
+if [ $KEEP_VM_ALIVE -eq 0 ]
+then
+    echo "############################################################"
+    echo "Destroying VM"
+    echo "############################################################"
+    uvt-kvm destroy $VM_NAME
+    ssh-keygen -R $VM_IP_ADDR
+fi
+rm -f $VM_CMDS
+
+echo "############################################################"
+echo "Checking build status" 
+echo "############################################################"
+
+LOG_FILES=`ls $ARCHIVES_LOC/*.txt $ARCHIVES_LOC/*.xml`
+STATUS=0
+NB_FOUND_FILES=0
+
+for FULLFILE in $LOG_FILES 
+do
+    if [[ $FULLFILE == *"$LOG_PATTERN"* ]]
+    then
+        filename=$(basename -- "$FULLFILE")
+        if [ "$LOG_PATTERN" == ".Rel14.txt" ]
+        then
+            PASS_PATTERN=`echo $filename | sed -e "s#$LOG_PATTERN##"`
+        fi
+        if [ "$LOG_PATTERN" == "basic_simulator" ]
+        then
+            PASS_PATTERN="lte-"
+        fi
+        if [ "$LOG_PATTERN" == "cppcheck.xml" ]
+        then
+            PASS_PATTERN="results version"
+            LOCAL_STAT=`egrep -c "$PASS_PATTERN" $FULLFILE`
+        else
+            LOCAL_STAT=`egrep -c "Built target $PASS_PATTERN" $FULLFILE`
+        fi
+        if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
+        NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
+    fi
+done
+
+if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]; then STATUS=-1; fi
+
+if [ $STATUS -eq 0 ]
+then
+    echo "STATUS seems OK"
+else
+    echo "STATUS failed?"
+fi
+exit $STATUS

ci-scripts/conf_files/enb.band13.tm1.50PRB.emtc.conf

@@ -1,443 +0,0 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB_Eurecom_LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  "1";
-
-    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2;} );
-
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-    {
-      node_function                             = "3GPP_eNodeB";
-      node_timing                               = "synch_to_ext_device";
-      node_synch_ref                            = 0;
-      frame_type                                = "FDD";
-      tdd_config                                = 3;
-      tdd_config_s                              = 0;
-      prefix_type                               = "NORMAL";
-      eutra_band                                = 13;
-      downlink_frequency                        = 751000000L;
-      uplink_frequency_offset                   = 31000000;
-      Nid_cell                                  = 0;
-      N_RB_DL                                   = 50;
-      Nid_cell_mbsfn                            = 0;
-      nb_antenna_ports                          = 1;
-      nb_antennas_tx                            = 1;
-      nb_antennas_rx                            = 1;
-      tx_gain                                   = 90;
-      rx_gain                                   = 110;
-      pbch_repetition                           = "FALSE";
-      prach_root                                = 0;
-      prach_config_index                        = 0;
-      prach_high_speed                          = "DISABLE";
-      prach_zero_correlation                    = 1;
-      prach_freq_offset                         = 1;
-      pucch_delta_shift                         = 1;
-      pucch_nRB_CQI                             = 1;
-      pucch_nCS_AN                              = 0;    
-      pucch_n1_AN                               = 32;
-      pdsch_referenceSignalPower                = -27;
-      pdsch_p_b                                 = 0;
-      pusch_n_SB                                = 1;
-      pusch_enable64QAM                         = "DISABLE";
-      pusch_hoppingMode                         = "interSubFrame";
-      pusch_hoppingOffset                       = 0; 
-      pusch_groupHoppingEnabled                 = "ENABLE";
-      pusch_groupAssignment                     = 0;
-      pusch_sequenceHoppingEnabled              = "DISABLE";
-      pusch_nDMRS1                              = 1;
-      phich_duration                            = "NORMAL";
-      phich_resource                            = "ONESIXTH";
-      srs_enable                                = "DISABLE"; 
-      /*  srs_BandwidthConfig                   =; 
-      srs_SubframeConfig                        =;
-      srs_ackNackST                             =;
-      srs_MaxUpPts                              =;*/
-
-      pusch_p0_Nominal                          = -96;
-      pusch_alpha                               = "AL1";
-      pucch_p0_Nominal                          = -104;
-      msg3_delta_Preamble                       = 6;
-      pucch_deltaF_Format1                      = "deltaF2";             
-      pucch_deltaF_Format1b                     = "deltaF3";            
-      pucch_deltaF_Format2                      = "deltaF0";            
-      pucch_deltaF_Format2a                     = "deltaF0";            
-      pucch_deltaF_Format2b                     = "deltaF0";            
-
-      rach_numberOfRA_Preambles                 = "n64"; #64 
-      rach_preamblesGroupAConfig                = "DISABLE"; 
-      /*
-      rach_sizeOfRA_PreamblesGroupA             = ;
-      rach_messageSizeGroupA                    = ;
-      rach_messagePowerOffsetGroupB             = ;
-      */
-      rach_powerRampingStep                     = 4;
-      rach_preambleInitialReceivedTargetPower   = -108;
-      rach_preambleTransMax                     = 10;
-      rach_raResponseWindowSize                 = 10;
-      rach_macContentionResolutionTimer         = 48;
-      rach_maxHARQ_Msg3Tx                       = 4;
-
-      pcch_default_PagingCycle                  = "rf128"; #128
-      pcch_nB                                   = "oneT";
-      bcch_modificationPeriodCoeff              = 2;
-      ue_TimersAndConstants_t300                = "ms1000";
-      ue_TimersAndConstants_t301                = "ms1000";
-      ue_TimersAndConstants_t310                = "ms1000";
-      ue_TimersAndConstants_t311                = "ms10000";
-      ue_TimersAndConstants_n310                = "n20";
-      ue_TimersAndConstants_n311                = "n1";
-      ue_TransmissionMode                       = "tm1";
-
-      # eMTC Parameters
-      emtc_parameters : 
-      {
-          eMTC_configured                       = 1;
-          #hyperSFN_r13                               = 0;
-          #eDRX_Allowed_r13                           = 0;
-          #q_QualMinRSRQ_CE_r13                       = ;
-
-          #SIB1
-          schedulingInfoSIB1_BR_r13                   = 4;
-
-          #system_info_value_tag_SI = 
-          #(
-          #    {
-          #        systemInfoValueTagSi_r13 = 0;
-          #    }
-          #);
-
-          cellSelectionInfoCE_r13                     = "ENABLE";
-          q_RxLevMinCE_r13                            = -70;
-          bandwidthReducedAccessRelatedInfo_r13       = "ENABLE"   
-          si_WindowLength_BR_r13                      = "ms20";    #0
-          si_RepetitionPattern_r13                    = "everyRF"; #0
-
-          scheduling_info_br =
-          (
-              {
-                  si_Narrowband_r13 = 8;
-                  si_TBS_r13        = 5;
-              }
-         );
-
-          fdd_DownlinkOrTddSubframeBitmapBR_r13     = "subframePattern40-r13"; 
-          fdd_DownlinkOrTddSubframeBitmapBR_val_r13 = 0xFFFFFFFFFF;
-          startSymbolBR_r13                           = 2;
-          si_HoppingConfigCommon_r13                  = "off"; #1; # Note: 1==OFF !
-          si_ValidityTime_r13                         = "true"; #0
-
-          freqHoppingParametersDL_r13                 = "DISABLE"
-          mpdcch_pdsch_HoppingNB_r13                  = "nb2"; #0
-          interval_DLHoppingConfigCommonModeA_r13     = "interval-FDD-r13"
-          interval_DLHoppingConfigCommonModeA_r13_val = 0;
-          interval_DLHoppingConfigCommonModeB_r13     = "interval-FDD-r13"
-          interval_DLHoppingConfigCommonModeB_r13_val = 0;
-          mpdcch_pdsch_HoppingOffset_r13              = 1;
-
-
-          # SIB23
-          frame_type                                = "FDD";
-          preambleTransMax_CE_r13                   = 10; #6
-
-          rach_numberOfRA_Preambles                 = 60; #14
-          rach_powerRampingStep                     = 4;
-          rach_preambleInitialReceivedTargetPower   = -110;           
-          rach_preambleTransMax                     = 10;
-          rach_raResponseWindowSize                 = 10;
-          rach_macContentionResolutionTimer         = 64;
-          rach_maxHARQ_Msg3Tx                       = 4;
-
-          # max size for this array is 4
-          rach_CE_LevelInfoList_r13 = 
-          (
-              {
-                  firstPreamble_r13                 = 60;
-                  lastPreamble_r13                  = 63;
-                  ra_ResponseWindowSize_r13         = 20; #0
-                  mac_ContentionResolutionTimer_r13 = 80; #0
-                  rar_HoppingConfig_r13             = "off";  #1;
-              }
-          );
-
-          # BCCH CONFIG          
-          bcch_modificationPeriodCoeff              = 2;
-
-          #PCCH Config
-          pcch_default_PagingCycle                  = "rf128"; #128
-          pcch_nB                                   = "oneT";
-
-          #PRACH Config
-          prach_root                                = 89;
-          prach_config_index                        = 0;
-          prach_high_speed                          = "DISABLE";
-          prach_zero_correlation                    = 1;
-          prach_freq_offset                         = 1;
-
-          #PDSCH Config Common          
-          pdsch_referenceSignalPower                = -27
-          pdsch_p_b                                 = 0;
-
-
-          # PUSCH Config Common
-          pusch_n_SB                                = 1;
-          pusch_hoppingMode                         = "interSubFrame";
-          pusch_hoppingOffset                       = 0;
-          pusch_enable64QAM                         = "DISABLE";
-          pusch_groupHoppingEnabled                 = "ENABLE";
-          pusch_groupAssignment                     = 0;
-          pusch_sequenceHoppingEnabled              = "DISABLE";
-          pusch_nDMRS1                              = 1;
-
-          # PUCCH Config Common
-          pucch_delta_shift                         = 1;
-          pucch_nRB_CQI                             = 0;
-          pucch_nCS_AN                              = 0;
-          pucch_n1_AN                               = 32;
-
-          pusch_p0_Nominal                          = -96;
-          pusch_alpha                               = "AL1";
-          pucch_p0_Nominal                          = -104;
-          pucch_deltaF_Format1                      = "deltaF0"; 
-          pucch_deltaF_Format1b                     = "deltaF3";            
-          pucch_deltaF_Format2                      = "deltaF0";           
-          pucch_deltaF_Format2a                     = "deltaF0";            
-          pucch_deltaF_Format2b                     = "deltaF0";
-
-          msg3_delta_Preamble                       = 6;
-
-
-          prach_ConfigCommon_v1310                  = "ENABLE";
- 
-          mpdcch_startSF_CSS_RA_r13                 = "fdd-r13";
-          mpdcch_startSF_CSS_RA_r13_val             = "v1"; #0
-          prach_HoppingOffset_r13                   = 0;
-
-         
-          pdsch_maxNumRepetitionCEmodeA_r13         = "r16"; #0
-          #pdsch_maxNumRepetitionCEmodeB_r13         = "r384"; # NULL - 2
-
-          pusch_maxNumRepetitionCEmodeA_r13         = "r8"; #0
-          #pusch_maxNumRepetitionCEmodeB_r13         = "r768"; #4 #NULL
-          #pusch_HoppingOffset_v1310                 = 5; #NULL
-
-          # max size for this array is 3
-          rsrp_range_list =
-          (
-              {
-                  rsrp_range_br = 0;
-              }
-          );
-
-          # max size for this array is 4
-          prach_parameters_ce_r13 = 
-          (
-              {
-                  prach_config_index_br                     = 3;
-                  prach_freq_offset_br                      = 2;
-                  prach_StartingSubframe_r13                = 2;
-                  maxNumPreambleAttemptCE_r13               = 10; #6
-                  numRepetitionPerPreambleAttempt_r13       = 1;  #0
-                  mpdcch_NumRepetition_RA_r13               = 1;  #0
-                  prach_HoppingConfig_r13                   = 0;  #1
-                  max_available_narrow_band                 = [3]; 
-             }
-          );
-
-          n1PUCCH_AN_InfoList_r13 = 
-          (
-              {
-                  pucch_info_value = 0;
-              }
-          );
-          
-
-          ue_TimersAndConstants_t300                = "ms1000";
-          ue_TimersAndConstants_t301                = "ms400";
-          ue_TimersAndConstants_t310                = "ms50";
-          ue_TimersAndConstants_t311                = "ms30000";
-          ue_TimersAndConstants_n310                = "n1";
-          ue_TimersAndConstants_n311                = "n10";
-          ue_TransmissionMode                       = "tm1";
-
-          pcch_config_v1310 :
-          {
-              paging_narrowbands_r13           = 1;
-              mpdcch_numrepetition_paging_r13  = "r1";         #0
-              #nb_v1310                        = "one256thT";  #2
-          }
-
-
-          pucch_NumRepetitionCE_Msg4_Level0_r13      = "n1";  #0 
-          #pucch_NumRepetitionCE_Msg4_Level1_r13     = "n2";  #1
-          #pucch_NumRepetitionCE_Msg4_Level2_r13     = "n16"; #2
-          #pucch_NumRepetitionCE_Msg4_Level3_r13     = "n32"; #3
-
-          sib2_freq_hoppingParameters_r13 : 
-          {
-             #sib2_mpdcch_pdsch_hoppingNB_r13                   = "nb2"; #0
-             #sib2_interval_DLHoppingConfigCommonModeA_r13      = "FDD"; # choice -> (0, FDD) (1, TDD)
-             #sib2_interval_DLHoppingConfigCommonModeA_r13_val  = "int1";          
-             #sib2_interval_DLHoppingConfigCommonModeB_r13      = "FDD"; # choice -> (0, FDD) (1, TDD)
-             #sib2_interval_DLHoppingConfigCommonModeB_r13_val  = "int2";        
-
-             sib2_interval_ULHoppingConfigCommonModeA_r13      = "FDD";  # choice -> (0, FDD) (1, TDD)
-             sib2_interval_ULHoppingConfigCommonModeA_r13_val  = "int4"; #2          
-#            sib2_interval_ULHoppingConfigCommonModeB_r13      = "FDD";  # choice -> (0, FDD) (1, TDD)
-#            sib2_interval_ULHoppingConfigCommonModeB_r13_val  = "int2"; #0
-
-#             sib2_mpdcch_pdsch_hoppingOffset_r13               = 1;
-          }
-
-          rach_preamblesGroupAConfig                = "DISABLE";
-          
-          phich_duration                            = "NORMAL";
-          phich_resource                            = "ONESIXTH";
-          srs_enable                                = "DISABLE";
-          
-      }
-
-
-
-}
-
-
-
-
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-    };
-
-    log_config :
-    {
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-   };
-  }
-);
-
-MACRLCs = (
-        {	
-        num_cc	 = 1;
-        tr_s_preference = "local_L1";
-        tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
-        }  
-);
-
-L1s = (
-      {
-      num_cc = 1;
-      tr_n_preference = "local_mac";
-      }  
-);
-
-RUs = (
-    {     
-        local_rf       = "yes"
-        nb_tx          = 1
-        nb_rx          = 1
-        att_tx         = 0
-        att_rx         = 0;
-        bands          = [13];
-        max_pdschReferenceSignalPower = -27;
-        max_rxgain                    = 125;
-        eNB_instances  = [0];
-    }
-);  
-
-log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
-

ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -134,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -144,11 +144,13 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -134,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -144,11 +144,13 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -134,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -144,11 +144,13 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf

@@ -171,7 +171,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -181,11 +181,12 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -197,8 +198,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
         }  
 );
 
@@ -227,7 +228,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf

@@ -171,7 +171,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -181,11 +181,12 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -197,8 +198,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
         }  
 );
 
@@ -218,7 +219,7 @@ RUs = (
          att_rx         = 0;
          bands          = [7];
          max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 125;
+         max_rxgain                    = 115;
          eNB_instances  = [0];
 
     }
@@ -227,7 +228,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf

@@ -171,7 +171,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -181,11 +181,12 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -197,8 +198,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
         }  
 );
 
@@ -218,7 +219,7 @@ RUs = (
          att_rx         = 0;
          bands          = [7];
          max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 120;
+         max_rxgain                    = 115;
          eNB_instances  = [0];
 
     }
@@ -227,7 +228,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band7.tm2.25PRB.usrpb210.conf

@@ -1,265 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
-
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function                 = "3GPP_eNODEB";
-      node_timing                   = "synch_to_ext_device";
-      node_synch_ref                = 0;
-      frame_type                    = "FDD";
-      tdd_config                    = 3;
-      tdd_config_s                  = 0;
-      prefix_type                   = "NORMAL";
-      eutra_band                    = 7;
-      downlink_frequency            = 2680000000L;
-      uplink_frequency_offset       = -120000000;
-      Nid_cell                      = 0;
-      N_RB_DL                       = 25;
-      Nid_cell_mbsfn                = 0;
-      nb_antenna_ports              = 2;
-      nb_antennas_tx                = 2;
-      nb_antennas_rx                = 2;
-      tx_gain                       = 90;
-      rx_gain                       = 125;
-      pbch_repetition               = "FALSE";
-      prach_root                    = 0;
-      prach_config_index            = 0;
-      prach_high_speed              = "DISABLE";
-      prach_zero_correlation        = 1;
-      prach_freq_offset             = 2;
-      pucch_delta_shift             = 1;
-      pucch_nRB_CQI                 = 0;
-      pucch_nCS_AN                  = 0;
-      pucch_n1_AN                   = 0;
-      pdsch_referenceSignalPower    = -25;
-      pdsch_p_b                     = 0;
-      pusch_n_SB                    = 1;
-      pusch_enable64QAM             = "DISABLE";
-      pusch_hoppingMode             = "interSubFrame";
-      pusch_hoppingOffset           = 0;
-      pusch_groupHoppingEnabled     = "ENABLE";
-      pusch_groupAssignment         = 0;
-      pusch_sequenceHoppingEnabled  = "DISABLE";
-      pusch_nDMRS1                  = 1;
-      phich_duration                = "NORMAL";
-      phich_resource                = "ONESIXTH";
-      srs_enable                    = "DISABLE";
-      /*
-      srs_BandwidthConfig           =;
-      srs_SubframeConfig            =;
-      srs_ackNackST                 =;
-      srs_MaxUpPts                  =;
-      */
-
-      pusch_p0_Nominal              = -96;
-      pusch_alpha                   = "AL1";
-      pucch_p0_Nominal              = -104;
-      msg3_delta_Preamble           = 6;
-      pucch_deltaF_Format1          = "deltaF2";
-      pucch_deltaF_Format1b         = "deltaF3";
-      pucch_deltaF_Format2          = "deltaF0";
-      pucch_deltaF_Format2a         = "deltaF0";
-      pucch_deltaF_Format2b         = "deltaF0";
-
-      rach_numberOfRA_Preambles               = 64;
-      rach_preamblesGroupAConfig              = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA           = ;
-      rach_messageSizeGroupA                  = ;
-      rach_messagePowerOffsetGroupB           = ;
-      */
-      rach_powerRampingStep                   = 4;
-      rach_preambleInitialReceivedTargetPower = -108;
-      rach_preambleTransMax                   = 10;
-      rach_raResponseWindowSize               = 10;
-      rach_macContentionResolutionTimer       = 48;
-      rach_maxHARQ_Msg3Tx                     = 4;
-
-      pcch_default_PagingCycle      = 128;
-      pcch_nB                       = "oneT";
-      bcch_modificationPeriodCoeff  = 2;
-      ue_TimersAndConstants_t300    = 1000;
-      ue_TimersAndConstants_t301    = 1000;
-      ue_TimersAndConstants_t310    = 1000;
-      ue_TimersAndConstants_t311    = 10000;
-      ue_TimersAndConstants_n310    = 20;
-      ue_TimersAndConstants_n311    = 1;
-      ue_TransmissionMode           = 2;
-
-      //Parameters for SIB18
-      rxPool_sc_CP_Len                                                = "normal";
-      rxPool_sc_Period                                                = "sf40";
-      rxPool_data_CP_Len                                              = "normal";
-      rxPool_ResourceConfig_prb_Num                                   = 20;
-      rxPool_ResourceConfig_prb_Start                                 = 5;
-      rxPool_ResourceConfig_prb_End                                   = 44;
-      rxPool_ResourceConfig_offsetIndicator_present                   = "prSmall";
-      rxPool_ResourceConfig_offsetIndicator_choice                    = 0;
-      rxPool_ResourceConfig_subframeBitmap_present                    = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*
-      rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-*/
-      // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-    };
-  }
-);
-
-MACRLCs = (
-    {
-    num_cc = 1;
-    tr_s_preference = "local_L1";
-    tr_n_preference = "local_RRC";
-    phy_test_mode   = 0;
-    puSch10xSnr     = 200;
-    puCch10xSnr     = 200;
-    }  
-);
-
-L1s = (
-    {
-    num_cc = 1;
-    tr_n_preference = "local_mac";
-    }  
-);
-
-RUs = (
-    {          
-    local_rf                      = "yes"
-    nb_tx                         = 2
-    nb_rx                         = 2
-    att_tx                        = 0
-    att_rx                        = 0;
-    bands                         = [7];
-    max_pdschReferenceSignalPower = -27;
-    max_rxgain                    = 115;
-    eNB_instances                 = [0];
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-NETWORK_CONTROLLER :
-{
-    FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
-    FLEXRAN_PORT           = 2210;
-    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
-    FLEXRAN_AWAIT_RECONF   = "no";
-};
-
-log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
-

ci-scripts/conf_files/lte-fdd-basic-sim.conf

@@ -186,6 +186,7 @@ eNBs =
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
         ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
@@ -237,8 +238,8 @@ THREAD_STRUCT = (
 NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "ens3";
-    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/lte-tdd-basic-sim.conf

@@ -145,9 +145,11 @@ eNBs =
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
         ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
@@ -217,8 +219,8 @@ THREAD_STRUCT = (
 NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "ens3";
-    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
+    FLEXRAN_INTERFACE_NAME = "lo";
+    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -137,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,11 +147,13 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -137,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,11 +147,13 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -137,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "10.0.0.2";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,11 +147,13 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
+
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf

@@ -174,7 +174,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -184,11 +184,12 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -200,8 +201,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
         }  
 );
 
@@ -234,7 +235,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf

@@ -174,7 +174,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -184,11 +184,12 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -200,8 +201,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
         }  
 );
 
@@ -234,7 +235,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf

@@ -174,7 +174,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -184,11 +184,12 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -200,8 +201,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
+        puSch10xSnr     =  200;
+        puCch10xSnr     =  200;
         }  
 );
 
@@ -234,7 +235,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf

@@ -1,236 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-
-    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
-
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "3GPP_eNODEB";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 7;
-      downlink_frequency      			      = 2685000000L;
-      uplink_frequency_offset 			      = -120000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 50;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -27;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-
-      //Parameters for SIB18
-      rxPool_sc_CP_Len                                       = "normal";
-      rxPool_sc_Period                                       = "sf40";
-      rxPool_data_CP_Len                                     = "normal";
-      rxPool_ResourceConfig_prb_Num                          = 20;
-      rxPool_ResourceConfig_prb_Start                        = 5;
-      rxPool_ResourceConfig_prb_End                          = 44;
-      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-*/
-      // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "ens3";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "ens3";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-        
-    };
-  }
-);
-
-MACRLCs = (
-	{
-	num_cc = 1;
-      	local_s_if_name  = "lo:";			  
-      	remote_s_address = "127.0.0.1";
-    	local_s_address  = "127.0.0.2"; 
-    	local_s_portc    = 50001;	
-    	remote_s_portc   = 50000;
-    	local_s_portd    = 50011;	
-    	remote_s_portd   = 50010;
-	tr_s_preference = "nfapi";
-	tr_n_preference = "local_RRC";
-        }  
-);
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-log_config =
-    {
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-   };

ci-scripts/conf_files/rru.fdd.band7.conf

@@ -20,7 +20,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/ue.nfapi.conf

@@ -1,44 +0,0 @@
-log_config = {
-  global_log_level                      ="info";
-  global_log_verbosity                  ="medium";
-  hw_log_level                          ="info";
-  hw_log_verbosity                      ="medium";
-  phy_log_level                         ="info";
-  phy_log_verbosity                     ="medium";
-  mac_log_level                         ="info";
-  mac_log_verbosity                     ="medium";
-  rlc_log_level                         ="info";
-  rlc_log_verbosity                     ="medium";
-  pdcp_log_level                        ="info";
-  pdcp_log_verbosity                    ="medium";
-  rrc_log_level                         ="info";
-  rrc_log_verbosity                     ="full";
-};
-
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "nfapi";
-    	local_n_if_name  = "lo";
-      	remote_n_address = "127.0.0.2";
-    	local_n_address  = "127.0.0.1";
-    	local_n_portc    = 50000;
-    	remote_n_portc   = 50001;
-    	local_n_portd    = 50010;
-    	remote_n_portd   = 50011;
-        }  
-);
-
-RUs = (
-    {		  
-       local_rf       = "yes"
-       nb_tx          = 1
-       nb_rx          = 1
-       att_tx         = 90
-       att_rx         = 0;
-       bands          = [7,38,42,43];
-       max_pdschReferenceSignalPower = -27;
-       max_rxgain                    = 125;
-    }		      
-);

ci-scripts/cppcheck_suppressions.list

@@ -1,101 +0,0 @@
-// *INDENT-OFF*   cppcheck doesn't like "astyling" this file!!!!
-// /*
-// * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-// * contributor license agreements.  See the NOTICE file distributed with
-// * this work for additional information regarding copyright ownership.
-// * The OpenAirInterface Software Alliance licenses this file to You under
-// * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-// * except in compliance with the License.
-// * You may obtain a copy of the License at
-// *
-// *      http://www.openairinterface.org/?page_id=698
-// *
-// * Unless required by applicable law or agreed to in writing, software
-// * distributed under the License is distributed on an "AS IS" BASIS,
-// * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// * See the License for the specific language governing permissions and
-// * limitations under the License.
-// *-------------------------------------------------------------------------------
-// * For more information about the OpenAirInterface (OAI) Software Alliance:
-// *      contact@openairinterface.org
-// */
-//*****************************************************************************
-//*****************************************************************************
-// section for "valid" memory leaks: the related functions are allocators and
-// the caller is responsible of freeing the memory. cppcheck has a mechanism
-// to check more accuretaly this, by defining callers responsible of freeing
-// but tools like valgring might be more suitable 
-//
-//-----------------------------------------------------------------------------
-//    suppress error about keysP memory leak, free must be done by calling func 
-memleak:common/utils/hashtable/obj_hashtable.c
-//-----------------------------------------------------------------------------
-//    suppress error about keys memory leak, free must be done by calling func 
-memleak:openair2/UTIL/OMG/omg_hashtable.c
-//-----------------------------------------------------------------------------
-//     suppress error about data memory leak. This is the buffer where 
-//    _emm_as_encode function creates the encoded buffer
-//
-memleak:openair3/NAS/UE/EMM/SAP/emm_as.c
-//-----------------------------------------------------------------------------
-//*****************************************************************************
-// section for files not used in oai exec's included in CI. 
-// Possibly candidates for removal otherwise should be documented and updated
-// for project rules enforcement
-// ----------------------------------------------------------------------------
-// likely sources for test programs, maintained? 
-invalidPrintfArgType_sint:openair1/PHY/CODING/TESTBENCH/ltetest.c
-memleak:openair1/PHY/CODING/TESTBENCH/ltetest.c
-invalidPrintfArgType_sint:openair1/PHY/CODING/TESTBENCH/pdcch_test.c
-//
-//-----------------------------------------------------------------------------
-// oaisim deprecated, remove?
-doubleFree:openair3/TEST/oaisim_mme_list_benchmark.c
-//
-//-----------------------------------------------------------------------------
-// is itti analyzer deprecated
-nullPointer:common/utils/itti_analyzer/itti_analyzer.c
-nullPointerRedundantCheck:common/utils/itti_analyzer/libbuffers/buffers.c
-doubleFree:common/utils/itti_analyzer/libbuffers/socket.c
-memleak:common/utils/itti_analyzer/libbuffers/socket.c
-memleak:common/utils/itti_analyzer/libparser/array_type.c
-memleak:common/utils/itti_analyzer/libui/ui_callbacks.c
-//-----------------------------------------------------------------------------
-// obviously never even compiled!!!
-syntaxError:openair1/SIMULATION/LTE_PHY/dlsim_tm4.c
-//-----------------------------------------------------------------------------
-// omg, otg commented out in cmakelist to be cleaned up definitely?
-arrayIndexOutOfBounds:openair2/UTIL/OMG/omg.c
-uninitvar:openair2/UTIL/OTG/otg_rx_socket.c
-//-----------------------------------------------------------------------------
-// cppcheck is not able to understand that buf is initialized at the first
-// iteration of the loop.
-nullPointer:common/utils/T/local_tracer.c:243
-//-----------------------------------------------------------------------------
-// once again cppcheck is not to understand that fds is initialized in the
-// first iteration of the loop
-nullPointer:common/utils/T/tracer/multi.c:264
-nullPointer:common/utils/T/tracer/multi.c:265
-//
-//*****************************************************************************
-// 
-// True problems we don't know how to fix, Suppression is commented out, 
-// as these kind of problem need either to be fixed or can be suppressed
-// when fully uderstood
-//-----------------------------------------------------------------------------
-// the function [nv]fapi_pnf_p7_config_create should return
-// _this. _this points to a structure and a dynamically allocated field is
-// returned. cppcheck suspects _this will never be released, so do i
-// memleak:nfapi/open-nFAPI/pnf/src/pnf_p7_interface.c
-// memleak:nfapi/open-nFAPI/vnf/src/vnf_p7_interface.c
-//-----------------------------------------------------------------------------
-// may be security_data->kenb.value is released from calling functions. But even 
-// when, for test, freeing it before returning from emm_proc_security_mode_command 
-// which does the allocation, cppcheck complains. So something might be wrong...
-// memleak:openair3/NAS/UE/EMM/SecurityModeControl.c
-//-----------------------------------------------------------------------------
-// when used, nobody but the original developer can guess if sn_data_cnf is set or not
-// cppcheck found that in some cases it is not, code needs cleanup before fixing that...  
-// uninitvar:openair2/LAYER2/RLC/AM_v9.3.0/rlc_am_status_report.c
-//*****************************************************************************
-// *INDENT-ON*

ci-scripts/createVM.sh

@@ -20,8 +20,8 @@
 # *      contact@openairinterface.org
 # */
 
-function create_usage {
-    echo "OAI CI VM script"
+function usage {
+    echo "OAI VM Creation script"
     echo "   Original Author: Raphael Defosseux"
     echo "   Requirements:"
     echo "     -- uvtool uvtool-libvirt apt-cacher"
@@ -31,9 +31,9 @@ function create_usage {
     echo ""
     echo "Usage:"
     echo "------"
-    echo "    oai-ci-vm-tool create [OPTIONS]"
+    echo "    createVM.sh [OPTIONS]"
     echo ""
-    echo "Mandatory Options:"
+    echo "Options:"
     echo "--------"
     echo "    --job-name #### OR -jn ####"
     echo "    Specify the name of the Jenkins job."
@@ -41,7 +41,12 @@ function create_usage {
     echo "    --build-id #### OR -id ####"
     echo "    Specify the build ID of the Jenkins job."
     echo ""
-    variant_usage
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
     echo "    Specify the variant to build."
     echo ""
     echo "    --help OR -h"
@@ -49,52 +54,144 @@ function create_usage {
     echo ""
 }
 
-function acquire_vm_create_lock {
-    local FlockFile="/tmp/vmclone.lck"
-    local unlocked="0"
-    touch ${FlockFile} 2>/dev/null
-    if [[ $? -ne 0 ]]
-    then
-        echo "Cannot access lock file ${FlockFile}"
-        exit 2
-    fi
-    while [ $unlocked -eq 0 ]
-    do
-        exec 5>${FlockFile}
-        flock -nx 5
-        if [[ $? -ne 0 ]]
-        then
-            echo "Another instance of VM creation is running"
-            sleep 10
-        else
-            unlocked="1"
-        fi
-    done
-    chmod 666 ${FlockFile} 2>/dev/null
+function variant_usage {
+    echo "OAI VM Build Check script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "    --variant enb-usrp     OR -v1"
+    echo "    --variant basic-sim    OR -v2"
+    echo "    --variant phy-sim      OR -v3"
+    echo "    --variant cppcheck     OR -v4"
+    echo "    --variant enb-ethernet OR -v7"
+    echo "    --variant ue-ethernet  OR -v8"
+    echo ""
 }
 
-function release_vm_create_lock {
-    local FlockFile="/tmp/vmclone.lck"
-    rm -Rf ${FlockFile}
-}
+if [ $# -lt 1 ] || [ $# -gt 6 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
 
-function create_vm {
-    echo "############################################################"
-    echo "OAI CI VM script"
-    echo "############################################################"
-    echo "VM_NAME             = $VM_NAME"
-    echo "VM_MEMORY           = $VM_MEMORY MBytes"
-    echo "VM_CPU              = $VM_CPU"
+VM_TEMPLATE=ci-
+JOB_NAME=XX
+BUILD_ID=XX
+VM_NAME=ci-enb-usrp
+VM_MEMORY=2048
+VM_CPU=4
 
-    echo "############################################################"
-    echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
-    echo "############################################################"
-    acquire_vm_create_lock
-    uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
-    echo "Waiting for VM to be started"
-    uvt-kvm wait $VM_NAME --insecure
+while [[ $# -gt 0 ]]
+do
+key="$1"
 
-    VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
-    echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
-    release_vm_create_lock
-}
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    shift
+    shift
+    ;;
+    -v1)
+    VM_NAME=ci-enb-usrp
+    shift
+    ;;
+    -v2)
+    VM_NAME=ci-basic-sim
+    VM_MEMORY=8192
+    shift
+    ;;
+    -v3)
+    VM_NAME=ci-phy-sim
+    shift
+    ;;
+    -v4)
+    VM_NAME=ci-cppcheck
+    VM_MEMORY=4096
+    VM_CPU=4
+    shift
+    ;;
+    -v7)
+    VM_NAME=ci-enb-ethernet
+    shift
+    ;;
+    -v8)
+    VM_NAME=ci-ue-ethernet
+    shift
+    ;;
+    --variant)
+    variant="$2"
+    case $variant in
+        enb-usrp)
+        VM_NAME=ci-enb-usrp
+        ;;
+        basic-sim)
+        VM_NAME=ci-basic-sim
+        VM_MEMORY=8192
+        ;;
+        phy-sim)
+        VM_NAME=ci-phy-sim
+        ;;
+        cppcheck)
+        VM_NAME=ci-cppcheck
+        VM_MEMORY=4096
+        VM_CPU=4
+        ;;
+        enb-ethernet)
+        VM_NAME=ci-enb-ethernet
+        ;;
+        ue-ethernet)
+        VM_NAME=ci-ue-ethernet
+        ;;
+        *)
+        echo ""
+        echo "Syntax Error: Invalid Variant option -> $variant"
+        echo ""
+        variant_usage
+        exit 1
+    esac
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
+then
+    VM_TEMPLATE=ci-
+else
+    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
+fi
+
+VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
+VM_CMDS=${VM_NAME}_cmds.txt
+
+echo "VM_NAME             = $VM_NAME"
+echo "VM_MEMORY           = $VM_MEMORY MBytes"
+echo "VM_CPU              = $VM_CPU"
+
+echo "############################################################"
+echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
+echo "############################################################"
+uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
+echo "Waiting for VM to be started"
+uvt-kvm wait $VM_NAME --insecure
+
+VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
+echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
+exit 0

ci-scripts/destroyAllRunningVM.sh

@@ -20,17 +20,15 @@
 # *      contact@openairinterface.org
 # */
 
-function destroy_usage {
-    echo "OAI CI VM script"
+function usage {
+    echo "OAI VM Destroy script"
     echo "   Original Author: Raphael Defosseux"
-    echo "   Requirements:"
-    echo "     -- uvtool uvtool-libvirt apt-cacher"
     echo ""
     echo "Usage:"
     echo "------"
-    echo "    oai-ci-vm-tool destroy [OPTIONS]"
+    echo "    destroyAllRunningVM.sh [OPTIONS]"
     echo ""
-    echo "Mandatory Options:"
+    echo "Options:"
     echo "--------"
     echo "    --job-name #### OR -jn ####"
     echo "    Specify the name of the Jenkins job."
@@ -38,26 +36,66 @@ function destroy_usage {
     echo "    --build-id #### OR -id ####"
     echo "    Specify the build ID of the Jenkins job."
     echo ""
-    echo "Options:"
-    echo "--------"
     echo "    --help OR -h"
     echo "    Print this help message."
     echo ""
 }
 
-function destroy_vm {
-    echo "############################################################"
-    echo "OAI CI VM script"
-    echo "############################################################"
-    echo "VM_TEMPLATE         = $VM_TEMPLATE"
+if [ $# -gt 4 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
 
-    LIST_CI_VM=`uvt-kvm list | grep $VM_TEMPLATE`
+VM_TEMPLATE=ci-
+JOB_NAME=XX
+BUILD_ID=XX
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
+then
+    VM_TEMPLATE=ci-
+else
+    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
+fi
+
+LIST_CI_VM=`uvt-kvm list | grep $VM_TEMPLATE`
+
+for CI_VM in $LIST_CI_VM
+do
+    VM_IP_ADDR=`uvt-kvm ip $CI_VM`
+    echo "VM to destroy: $CI_VM -- IP $VM_IP_ADDR"
+    uvt-kvm destroy $CI_VM
+    ssh-keygen -R $VM_IP_ADDR
+done
+
+exit 0
 
-    for CI_VM in $LIST_CI_VM
-    do
-        VM_IP_ADDR=`uvt-kvm ip $CI_VM`
-        echo "VM to destroy: $CI_VM -- IP $VM_IP_ADDR"
-        uvt-kvm destroy $CI_VM
-        ssh-keygen -R $VM_IP_ADDR
-    done
-}

ci-scripts/doGitLabMerge.sh

@@ -1,24 +1,4 @@
 #!/bin/bash
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
 
 function usage {
     echo "OAI GitLab merge request applying script"
@@ -121,7 +101,6 @@ git config user.email "jenkins@openairinterface.org"
 git config user.name "OAI Jenkins"
 
 git checkout -f $SOURCE_COMMIT_ID
-git log -n1 --pretty=format:\"%s\" > .git/CI_COMMIT_MSG
 
 git merge --ff $TARGET_COMMIT_ID -m "Temporary merge for CI"
 

ci-scripts/oai-ci-vm-tool

@@ -1,579 +0,0 @@
-#!/bin/bash
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
-
-function top_usage {
-    echo "OAI CI VM script"
-    echo "   Original Author: Raphael Defosseux"
-    echo "   Requirements:"
-    echo "     -- uvtool uvtool-libvirt apt-cacher"
-    echo "     -- xenial image already synced"
-    echo ""
-    echo "Usage:"
-    echo "------"
-    echo "    oai-ci-vm-tool (-h|--help) {create,destroy,build,wait,test,report-build,report-test} ..."
-    echo ""
-}
-
-function variant_usage {
-    echo "    --variant enb-usrp     OR -v1"
-    echo "    --variant basic-sim    OR -v2"
-    echo "    --variant phy-sim      OR -v3"
-    echo "    --variant cppcheck     OR -v4"
-    echo "    --variant enb-ethernet OR -v7"
-    echo "    --variant ue-ethernet  OR -v8"
-    echo "    --variant l2-sim       OR -v9"
-    echo "    --variant flexran-rtc  OR -v10"
-}
-
-MY_DIR=$(dirname $(readlink -f $0))
-. $MY_DIR/createVM.sh
-. $MY_DIR/buildOnVM.sh
-. $MY_DIR/waitBuildOnVM.sh
-. $MY_DIR/destroyAllRunningVM.sh
-. $MY_DIR/runTestOnVM.sh
-. $MY_DIR/reportBuildLocally.sh
-. $MY_DIR/reportTestLocally.sh
-
-if [ $# -lt 1 ]
-then
-    echo "Syntax Error: too few arguments"
-    echo ""
-    top_usage
-    exit 1
-fi
-
-VM_TEMPLATE=ci-
-JOB_NAME=XX
-BUILD_ID=XX
-VM_NAME=ci-enb-usrp
-VM_MEMORY=2048
-VM_CPU=4
-ARCHIVES_LOC=enb_usrp
-LOG_PATTERN=.Rel14.txt
-NB_PATTERN_FILES=4
-BUILD_OPTIONS="--eNB -w USRP"
-KEEP_VM_ALIVE=0
-RUN_OPTIONS="none"
-DAEMON=0
-MR_TRIG=0
-PU_TRIG=0
-
-HELP_CMD=0
-CREATE_CMD=0
-BUILD_CMD=0
-WAIT_CMD=0
-DESTROY_CMD=0
-TEST_CMD=0
-REPORT_BUILD_CMD=0
-REPORT_TEST_CMD=0
-NBARGS=0
-
-while [[ $# -gt 0 ]]
-do
-key="$1"
-
-case $key in
-    -h|--help)
-    HELP_CMD=1
-    shift
-    ;;
-    create)
-    CREATE_CMD=1
-    # It is implied to keep the VM when creating it
-    KEEP_VM_ALIVE=1
-    shift
-    ;;
-    build)
-    BUILD_CMD=1
-    shift
-    ;;
-    wait)
-    WAIT_CMD=1
-    shift
-    ;;
-    test)
-    TEST_CMD=1
-    shift
-    ;;
-    destroy)
-    DESTROY_CMD=1
-    shift
-    ;;
-    report-build)
-    REPORT_BUILD_CMD=1
-    shift
-    ;;
-    report-test)
-    REPORT_TEST_CMD=1
-    shift
-    ;;
-    -jn|--job-name)
-    JOB_NAME="$2"
-    NBARGS=$[$NBARGS+1]
-    shift
-    shift
-    ;;
-    -id|--build-id)
-    BUILD_ID="$2"
-    NBARGS=$[$NBARGS+2]
-    shift
-    shift
-    ;;
-    -ws|--workspace)
-    JENKINS_WKSP="$2"
-    NBARGS=$[$NBARGS+4]
-    shift
-    shift
-    ;;
-    -k|--keep-vm-alive)
-    KEEP_VM_ALIVE=1
-    NBARGS=$[$NBARGS+8]
-    shift
-    ;;
-    -D|--daemon)
-    DAEMON=1
-    NBARGS=$[$NBARGS+16]
-    shift
-    ;;
-    -gu|--git-url)
-    GIT_URL="$2"
-    NBARGS=$[$NBARGS+32]
-    shift
-    shift
-    ;;
-    --trigger)
-    TRIG="$2"
-    case $TRIG in
-        merge-request)
-        MR_TRIG=1
-        ;;
-        push)
-        PU_TRIG=1
-        ;;
-        *)
-        echo ""
-        echo "Syntax Error: Invalid Trigger option -> $TRIG"
-        echo ""
-        trigger_usage
-        exit
-        ;;
-    esac
-    NBARGS=$[$NBARGS+64]
-    shift
-    shift
-    ;;
-    -mr)
-    MR_TRIG=1
-    NBARGS=$[$NBARGS+64]
-    shift
-    ;;
-    -pu)
-    PU_TRIG=1
-    NBARGS=$[$NBARGS+64]
-    shift
-    ;;
-    -sb|--src-branch)
-    SOURCE_BRANCH="$2"
-    NBARGS=$[$NBARGS+1024]
-    shift
-    shift
-    ;;
-    -sc|--src-commit)
-    SOURCE_COMMIT_ID="$2"
-    NBARGS=$[$NBARGS+2048]
-    shift
-    shift
-    ;;
-    -tb|--target-branch)
-    TARGET_BRANCH="$2"
-    NBARGS=$[$NBARGS+4096]
-    shift
-    shift
-    ;;
-    -tc|--target-commit)
-    TARGET_COMMIT_ID="$2"
-    NBARGS=$[$NBARGS+8192]
-    shift
-    shift
-    ;;
-    -br|--branch)
-    SOURCE_BRANCH="$2"
-    NBARGS=$[$NBARGS+16384]
-    shift
-    shift
-    ;;
-    -co|--commit)
-    SOURCE_COMMIT_ID="$2"
-    NBARGS=$[$NBARGS+32768]
-    shift
-    shift
-    ;;
-    -v1)
-    VM_NAME=ci-enb-usrp
-    ARCHIVES_LOC=enb_usrp
-    LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=4
-    BUILD_OPTIONS="--eNB -w USRP --mu"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    -v2)
-    VM_NAME=ci-basic-sim
-    ARCHIVES_LOC=basic_sim
-    LOG_PATTERN=basic_simulator
-    NB_PATTERN_FILES=2
-    BUILD_OPTIONS="--basic-simulator"
-    VM_MEMORY=8192
-    VM_CPU=4
-    RUN_OPTIONS="complex"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    -v3)
-    VM_NAME=ci-phy-sim
-    ARCHIVES_LOC=phy_sim
-    LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=3
-    BUILD_OPTIONS="--phy_simulators"
-    RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    -v4)
-    VM_NAME=ci-cppcheck
-    VM_MEMORY=4096
-    ARCHIVES_LOC=cppcheck
-    LOG_PATTERN=cppcheck.xml
-    NB_PATTERN_FILES=1
-    BUILD_OPTIONS="--enable=warning --force --xml --xml-version=2 --suppressions-list=ci-scripts/cppcheck_suppressions.list"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    -v7)
-    VM_NAME=ci-enb-ethernet
-    ARCHIVES_LOC=enb_eth
-    LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=6
-    BUILD_OPTIONS="--eNB -t ETHERNET --noS1"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    -v8)
-    VM_NAME=ci-ue-ethernet
-    ARCHIVES_LOC=ue_eth
-    LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=6
-    BUILD_OPTIONS="--UE -t ETHERNET --noS1"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    -v9)
-    VM_NAME=ci-l2-sim
-    VM_MEMORY=8192
-    VM_CPU=8
-    ARCHIVES_LOC=l2_sim
-    LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=4
-    BUILD_OPTIONS="--eNB -t ETHERNET"
-    RUN_OPTIONS="complex"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    -v10)
-    VM_NAME=ci-flexran-rtc
-    ARCHIVES_LOC=flexran
-    LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=1
-    BUILD_OPTIONS="cmake . && make -j2"
-    NBARGS=$[$NBARGS+256]
-    shift
-    ;;
-    --variant)
-    variant="$2"
-    case $variant in
-        enb-usrp)
-        VM_NAME=ci-enb-usrp
-        ARCHIVES_LOC=enb_usrp
-        LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=4
-        BUILD_OPTIONS="--eNB -w USRP --mu"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        basic-sim)
-        VM_NAME=ci-basic-sim
-        ARCHIVES_LOC=basic_sim
-        LOG_PATTERN=basic_simulator
-        NB_PATTERN_FILES=2
-        BUILD_OPTIONS="--basic-simulator"
-        VM_MEMORY=8192
-        VM_CPU=4
-        RUN_OPTIONS="complex"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        phy-sim)
-        VM_NAME=ci-phy-sim
-        ARCHIVES_LOC=phy_sim
-        LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=3
-        BUILD_OPTIONS="--phy_simulators"
-        RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        cppcheck)
-        VM_NAME=ci-cppcheck
-        VM_MEMORY=4096
-        ARCHIVES_LOC=cppcheck
-        LOG_PATTERN=cppcheck.xml
-        NB_PATTERN_FILES=1
-        BUILD_OPTIONS="--enable=warning --force --xml --xml-version=2 --suppressions-list=ci-scripts/cppcheck_suppressions.list"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        enb-ethernet)
-        VM_NAME=ci-enb-ethernet
-        ARCHIVES_LOC=enb_eth
-        LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=6
-        BUILD_OPTIONS="--eNB -t ETHERNET --noS1"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        ue-ethernet)
-        VM_NAME=ci-ue-ethernet
-        ARCHIVES_LOC=ue_eth
-        LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=6
-        BUILD_OPTIONS="--UE -t ETHERNET --noS1"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        l2-sim)
-        VM_NAME=ci-l2-sim
-        VM_MEMORY=8192
-        VM_CPU=8
-        ARCHIVES_LOC=l2_sim
-        LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=4
-        BUILD_OPTIONS="--eNB -t ETHERNET"
-        RUN_OPTIONS="complex"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        flexran-rtc)
-        VM_NAME=ci-flexran-rtc
-        ARCHIVES_LOC=flexran
-        LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=1
-        BUILD_OPTIONS="cmake . && make -j2"
-        NBARGS=$[$NBARGS+256]
-        ;;
-        *)
-        echo ""
-        echo "Syntax Error: Invalid Variant option -> $variant"
-        echo ""
-        variant_usage
-        exit 1
-    esac
-    shift
-    shift
-    ;;
-    *)
-    echo "Syntax Error: unknown option: $key"
-    echo ""
-    top_usage
-    exit 1
-esac
-done
-
-MANY_CMDS=$[$CREATE_CMD+$BUILD_CMD+$WAIT_CMD+$DESTROY_CMD+$TEST_CMD+$REPORT_BUILD_CMD+$REPORT_TEST_CMD]
-if [ $MANY_CMDS -gt 1 ]
-then
-    echo "Syntax Error: too many commands"
-    top_usage
-    exit 1
-fi
-
-if [ $HELP_CMD -eq 1 ]
-then
-    if [ $MANY_CMDS -eq 0 ]
-    then
-        top_usage
-        exit 0
-    fi
-    if [ $CREATE_CMD -eq 1 ]
-    then
-        create_usage
-        exit 0
-    fi
-    if [ $BUILD_CMD -eq 1 ]
-    then
-        build_usage
-        exit 0
-    fi
-    if [ $WAIT_CMD -eq 1 ]
-    then
-        wait_usage
-        exit 0
-    fi
-    if [ $TEST_CMD -eq 1 ]
-    then
-        run_test_usage
-        exit 0
-    fi
-    if [ $DESTROY_CMD -eq 1 ]
-    then
-        destroy_usage
-        exit 0
-    fi
-    if [ $REPORT_BUILD_CMD -eq 1 ]
-    then
-        report_build_usage
-        exit 0
-    fi
-    if [ $REPORT_TEST_CMD -eq 1 ]
-    then
-        report_test_usage
-        exit 0
-    fi
-else
-    if [ $MANY_CMDS -eq 0 ]
-    then
-        echo "Syntax Error: no command"
-        top_usage
-        exit 1
-    fi
-    # For create, mandatory options: jn, id. Optional: variant
-    if [ $CREATE_CMD -eq 1 ] && [ $NBARGS -ne 3 ] && [ $NBARGS -ne 259 ]
-    then
-        echo "Syntax Error: unsupported option(s) for create command"
-        create_usage
-        exit 1
-    fi
-    # For build, mandatory options: jn, id, ws. Optional: variant, k, D
-    if [ $BUILD_CMD -eq 1 ] && [ $NBARGS -ne 7 ] && [ $NBARGS -ne 263 ] && [ $NBARGS -ne 15 ] && [ $NBARGS -ne 271 ] && [ $NBARGS -ne 23 ] && [ $NBARGS -ne 279 ] && [ $NBARGS -ne 31 ] && [ $NBARGS -ne 287 ]
-    then
-        echo "Syntax Error: unsupported option(s) for build command"
-        build_usage
-        exit 1
-    fi
-    # For wait, mandatory options: jn, id, ws. Optional: variant, k
-    if [ $WAIT_CMD -eq 1 ] && [ $NBARGS -ne 7 ] && [ $NBARGS -ne 263 ] && [ $NBARGS -ne 15 ] && [ $NBARGS -ne 271 ]
-    then
-        echo "Syntax Error: unsupported option(s) for wait command"
-        wait_usage
-        exit 1
-    fi
-    # For test, mandatory options: jn, id, ws. Optional: variant, k
-    if [ $TEST_CMD -eq 1 ] && [ $NBARGS -ne 7 ] && [ $NBARGS -ne 263 ] && [ $NBARGS -ne 15 ] && [ $NBARGS -ne 271 ]
-    then
-        echo "Syntax Error: unsupported option(s) for test command"
-        run_test_usage
-        exit 1
-    fi
-    # For destroy, mandatory options: jn, id.
-    if [ $DESTROY_CMD -eq 1 ] && [ $NBARGS -ne 3 ]
-    then
-        echo "Syntax Error: unsupported option(s) for destroy command"
-        destroy_usage
-        exit 1
-    fi
-    # For report-build, mandatory options: jn, id, ws, gu, pu, br,co.
-    #                                  or: jn, id, ws, gu, mr, sb, sc, tb, tc.
-    if [ $REPORT_BUILD_CMD -eq 1 ] && [ $NBARGS -ne 15463 ] && [ $NBARGS -ne 49255 ]
-    then
-        echo "Syntax Error: unsupported option(s) for report-build command"
-        report_build_usage
-        exit 1
-    fi
-    # For report-test, mandatory options: jn, id, ws, gu, pu, br,co.
-    #                                 or: jn, id, ws, gu, mr, sb, sc, tb, tc.
-    if [ $REPORT_TEST_CMD -eq 1 ] && [ $NBARGS -ne 15463 ] && [ $NBARGS -ne 49255 ]
-    then
-        echo "Syntax Error: unsupported option(s) for report-test command"
-        report_test_usage
-        exit 1
-    fi
-fi
-
-# Checking uvt-kvm is installed
-UVT_KVM_PATH=`which uvt-kvm | grep -c uvt-kvm`
-if [ $UVT_KVM_PATH -eq 0 ]
-then
-    echo "Error: uvt-kvm is not installed"
-    top_usage
-    exit 1
-fi
-
-if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
-then
-    VM_TEMPLATE=ci-
-else
-    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
-fi
-
-VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
-VM_CMDS=${VM_NAME}_cmds.txt
-ARCHIVES_LOC=${JENKINS_WKSP}/archives/${ARCHIVES_LOC}
-
-STATUS=0
-if [ $CREATE_CMD -eq 1 ]
-then
-    create_vm
-fi
-if [ $BUILD_CMD -eq 1 ]
-then
-    build_on_vm
-    if [ $DAEMON -eq 0 ] && [ $STATUS -eq 0 ]
-    then
-        check_on_vm_build
-    fi
-fi
-if [ $WAIT_CMD -eq 1 ]
-then
-    wait_on_vm_build
-    if [ $STATUS -eq 0 ]
-    then
-        check_on_vm_build
-    fi
-fi
-if [ $TEST_CMD -eq 1 ]
-then
-    ARCHIVES_LOC=${ARCHIVES_LOC}/test
-    run_test_on_vm
-fi
-if [ $DESTROY_CMD -eq 1 ]
-then
-    destroy_vm
-fi
-if [ $REPORT_BUILD_CMD -eq 1 ]
-then
-    report_build
-fi
-if [ $REPORT_TEST_CMD -eq 1 ]
-then
-    report_test
-fi
-
-# Did command pass or fail?
-if [ $STATUS -eq 0 ]
-then
-    echo "STATUS seems OK"
-else
-    echo "STATUS failed?"
-fi
-exit $STATUS

ci-scripts/reportBuildLocally.sh

@@ -20,13 +20,14 @@
 # *      contact@openairinterface.org
 # */
 
-function report_build_usage {
-    echo "OAI CI VM script"
+function usage {
+    echo "OAI Local Build Report script"
     echo "   Original Author: Raphael Defosseux"
     echo ""
     echo "Usage:"
     echo "------"
-    echo "    oai-ci-vm-tool report-build [OPTIONS]"
+    echo ""
+    echo "    reportBuildLocally.sh [OPTIONS]"
     echo ""
     echo "Options:"
     echo "--------"
@@ -46,9 +47,6 @@ function report_build_usage {
     echo "    --build-id #### OR -id ####"
     echo "    Specify the build ID of the Jenkins job."
     echo ""
-    echo "    --workspace #### OR -ws ####"
-    echo "    Specify the workspace."
-    echo ""
     echo "    --trigger merge-request OR -mr"
     echo "    --trigger push          OR -pu"
     echo "    Specify trigger action of the Jenkins job. Either a merge-request event or a push event."
@@ -81,7 +79,7 @@ function report_build_usage {
 }
 
 function trigger_usage {
-    echo "OAI CI VM script"
+    echo "OAI Local Build Report script"
     echo "   Original Author: Raphael Defosseux"
     echo ""
     echo "    --trigger merge-request OR -mr"
@@ -105,7 +103,7 @@ function details_table {
     COMPLETE_MESSAGE="start"
     for MESSAGE in $LIST_MESSAGES
     do
-        if [[ $MESSAGE == *"/home/ubuntu/tmp"* ]] || [[  $MESSAGE == *"/tmp/CI-eNB"* ]]
+        if [[ $MESSAGE == *"/home/ubuntu/tmp"* ]]
         then
             FILENAME=`echo $MESSAGE | sed -e "s#^/home/ubuntu/tmp/##" -e "s#^.*/tmp/CI-eNB/##" | awk -F ":" '{print $1}'`
             LINENB=`echo $MESSAGE | awk -F ":" '{print $2}'`
@@ -141,23 +139,6 @@ function details_table {
 
 function summary_table_header {
     echo "   <h3>$1</h3>" >> ./build_results.html
-    if [ -f $2/build_final_status.log ]
-    then
-        if [ `grep -c BUILD_OK $2/build_final_status.log` -eq 1 ]
-        then
-            echo "   <div class=\"alert alert-success\">" >> ./build_results.html
-            echo "      <strong>BUILD was SUCCESSFUL <span class=\"glyphicon glyphicon-ok-circle\"></span></strong>" >> ./build_results.html
-            echo "   </div>" >> ./build_results.html
-        else
-            echo "   <div class=\"alert alert-danger\">" >> ./build_results.html
-            echo "      <strong>BUILD was a FAILURE! <span class=\"glyphicon glyphicon-ban-circle\"></span></strong>" >> ./build_results.html
-            echo "   </div>" >> ./build_results.html
-        fi
-    else
-        echo "   <div class=\"alert alert-danger\">" >> ./build_results.html
-        echo "      <strong>COULD NOT DETERMINE BUILD FINAL STATUS! <span class=\"glyphicon glyphicon-ban-circle\"></span></strong>" >> ./build_results.html
-        echo "   </div>" >> ./build_results.html
-    fi
     echo "   <table border = \"1\">" >> ./build_results.html
     echo "      <tr bgcolor = \"#33CCFF\" >" >> ./build_results.html
     echo "        <th>Element</th>" >> ./build_results.html
@@ -172,8 +153,8 @@ function summary_table_row {
     echo "        <td bgcolor = \"lightcyan\" >$1</th>" >> ./build_results.html
     if [ -f $2 ]
     then
-        BUILD_STATUS=`egrep -c "$3" $2`
-        if [ $BUILD_STATUS -eq 1 ]
+        STATUS=`egrep -c "$3" $2`
+        if [ $STATUS -eq 1 ]
         then
             echo "        <td bgcolor = \"green\" >OK</th>" >> ./build_results.html
         else
@@ -215,28 +196,7 @@ function summary_table_footer {
 }
 
 function sca_summary_table_header {
-    echo "   <h3>$2</h3>" >> ./build_results.html
-    NB_ERRORS=`egrep -c "severity=\"error\"" $1`
-    NB_WARNINGS=`egrep -c "severity=\"warning\"" $1`
-    if [ $NB_ERRORS -eq 0 ] && [ $NB_WARNINGS -eq 0 ]
-    then
-        echo "   <div class=\"alert alert-success\">" >> ./build_results.html
-        echo "      <strong>CPPCHECK found NO error and NO warning <span class=\"glyphicon glyphicon-ok-circle\"></span></strong>" >> ./build_results.html
-        echo "   </div>" >> ./build_results.html
-    else
-        if [ $NB_ERRORS -eq 0 ]
-        then
-            echo "   <div class=\"alert alert-warning\">" >> ./build_results.html
-            echo "      <strong>CPPCHECK found NO error and $NB_WARNINGS warnings <span class=\"glyphicon glyphicon-warning-sign\"></span></strong>" >> ./build_results.html
-            echo "   </div>" >> ./build_results.html
-        else
-            echo "   <div class=\"alert alert-danger\">" >> ./build_results.html
-            echo "      <strong>CPPCHECK found $NB_ERRORS errors and $NB_WARNINGS warnings <span class=\"glyphicon glyphicon-ban-circle\"></span></strong>" >> ./build_results.html
-            echo "   </div>" >> ./build_results.html
-        fi
-    fi
-    echo "   <button data-toggle=\"collapse\" data-target=\"#oai-cppcheck-details\">More details on CPPCHECK results</button>" >> ./build_results.html
-    echo "   <div id=\"oai-cppcheck-details\" class=\"collapse\">" >> ./build_results.html
+    echo "   <h3>$1</h3>" >> ./build_results.html
     echo "   <table border = \"1\">" >> ./build_results.html
     echo "      <tr bgcolor = \"#33CCFF\" >" >> ./build_results.html
     echo "        <th>Error / Warning Type</th>" >> ./build_results.html
@@ -301,268 +261,344 @@ function sca_summary_table_footer {
     echo "   </table>" >> ./build_results.html
     echo "   <p>Full details in zipped artifact (cppcheck/cppcheck.xml) </p>" >> ./build_results.html
     echo "   <p style=\"margin-left: 30px\">Graphical Interface tool : <strong><code>cppcheck-gui -l cppcheck/cppcheck.xml</code></strong></p>" >> ./build_results.html
-    echo "   </div>" >> ./build_results.html
 }
 
-function report_build {
-    echo "############################################################"
-    echo "OAI CI VM script"
-    echo "############################################################"
+jb_checker=0
+mr_checker=0
+pu_checker=0
+MR_TRIG=0
+PU_TRIG=0
+while [[ $# -gt 0 ]]
+do
+key="$1"
 
-    echo "JENKINS_WKSP        = $JENKINS_WKSP"
-    echo "GIT_URL             = $GIT_URL"
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -gu|--git-url)
+    GIT_URL="$2"
+    let "jb_checker|=0x1"
+    shift
+    shift
+    ;;
+    -jn|--job-name)
+    JOB_NAME="$2"
+    let "jb_checker|=0x2"
+    shift
+    shift
+    ;;
+    -id|--build-id)
+    BUILD_ID="$2"
+    let "jb_checker|=0x4"
+    shift
+    shift
+    ;;
+    --trigger)
+    TRIG="$2"
+    case $TRIG in
+        merge-request)
+        MR_TRIG=1
+        ;;
+        push)
+        PU_TRIG=1
+        ;;
+        *)
+        echo ""
+        echo "Syntax Error: Invalid Trigger option -> $TRIG"
+        echo ""
+        trigger_usage
+        exit
+        ;;
+    esac
+    let "jb_checker|=0x8"
+    shift
+    shift
+    ;;
+    -mr)
+    MR_TRIG=1
+    let "jb_checker|=0x8"
+    shift
+    ;;
+    -pu)
+    PU_TRIG=1
+    let "jb_checker|=0x8"
+    shift
+    ;;
+    -sb|--src-branch)
+    SOURCE_BRANCH="$2"
+    let "mr_checker|=0x1"
+    shift
+    shift
+    ;;
+    -sc|--src-commit)
+    SOURCE_COMMIT_ID="$2"
+    let "mr_checker|=0x2"
+    shift
+    shift
+    ;;
+    -tb|--target-branch)
+    TARGET_BRANCH="$2"
+    let "mr_checker|=0x4"
+    shift
+    shift
+    ;;
+    -tc|--target-commit)
+    TARGET_COMMIT_ID="$2"
+    let "mr_checker|=0x8"
+    shift
+    shift
+    ;;
+    -br|--branch)
+    SOURCE_BRANCH="$2"
+    let "pu_checker|=0x1"
+    shift
+    shift
+    ;;
+    -co|--commit)
+    SOURCE_COMMIT_ID="$2"
+    let "pu_checker|=0x2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+    ;;
+esac
 
-    cd ${JENKINS_WKSP}
-    echo "<!DOCTYPE html>" > ./build_results.html
-    echo "<html class=\"no-js\" lang=\"en-US\">" >> ./build_results.html
-    echo "<head>" >> ./build_results.html
-    echo "  <meta name=\"viewport\" content=\"width=device-width, initial-scale=1\">" >> ./build_results.html
-    echo "  <link rel=\"stylesheet\" href=\"https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css\">" >> ./build_results.html
-    echo "  <script src=\"https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js\"></script>" >> ./build_results.html
-    echo "  <script src=\"https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js\"></script>" >> ./build_results.html
-    echo "  <title>Build Results for $JOB_NAME job build #$BUILD_ID</title>" >> ./build_results.html
-    echo "  <base href = \"http://www.openairinterface.org/\" />" >> ./build_results.html
-    echo "</head>" >> ./build_results.html
-    echo "<body><div class=\"container\">" >> ./build_results.html
-    echo "  <br>" >> ./build_results.html
-    echo "  <table style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
-    echo "    <tr style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
-    echo "      <td style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
-    echo "        <a href=\"http://www.openairinterface.org/\">" >> ./build_results.html
-    echo "           <img src=\"/wp-content/uploads/2016/03/cropped-oai_final_logo2.png\" alt=\"\" border=\"none\" height=50 width=150>" >> ./build_results.html
-    echo "           </img>" >> ./build_results.html
-    echo "        </a>" >> ./build_results.html
-    echo "      </td>" >> ./build_results.html
-    echo "      <td style=\"border-collapse: collapse; border: none; vertical-align: center;\">" >> ./build_results.html
-    echo "        <b><font size = \"6\">Job Summary -- Job: $JOB_NAME -- Build-ID: $BUILD_ID</font></b>" >> ./build_results.html
-    echo "      </td>" >> ./build_results.html
-    echo "    </tr>" >> ./build_results.html
-    echo "  </table>" >> ./build_results.html
-    echo "  <br>" >> ./build_results.html
-    echo "   <table border = \"1\">" >> ./build_results.html
-    echo "      <tr>" >> ./build_results.html
-    echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-time\"></span> Build Start Time (UTC)</td>" >> ./build_results.html
-    echo "        <td>TEMPLATE_BUILD_TIME</td>" >> ./build_results.html
-    echo "      </tr>" >> ./build_results.html
-    echo "      <tr>" >> ./build_results.html
-    echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-cloud-upload\"></span> GIT Repository</td>" >> ./build_results.html
-    echo "        <td><a href=\"$GIT_URL\">$GIT_URL</a></td>" >> ./build_results.html
-    echo "      </tr>" >> ./build_results.html
-    echo "      <tr>" >> ./build_results.html
-    echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-wrench\"></span> Job Trigger</td>" >> ./build_results.html
-    if [ $PU_TRIG -eq 1 ]; then echo "        <td>Push Event</td>" >> ./build_results.html; fi
-    if [ $MR_TRIG -eq 1 ]; then echo "        <td>Merge-Request</td>" >> ./build_results.html; fi
-    echo "      </tr>" >> ./build_results.html
-    if [ $PU_TRIG -eq 1 ]
+done
+
+if [ $jb_checker -ne 15 ]
+then
+    echo ""
+    echo "Syntax Error: missing job information."
+    # TODO : list missing info
+    echo ""
+    exit 1
+fi
+
+if [ $PU_TRIG -eq 1 ] && [ $MR_TRIG -eq 1 ]
+then
+    echo ""
+    echo "Syntax Error: trigger action incoherent."
+    echo ""
+    trigger_usage
+    exit 1
+fi
+
+if [ $PU_TRIG -eq 1 ]
+then
+    if [ $pu_checker -ne 3 ]
     then
-        echo "      <tr>" >> ./build_results.html
-        echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-tree-deciduous\"></span> Branch</td>" >> ./build_results.html
-        echo "        <td>$SOURCE_BRANCH</td>" >> ./build_results.html
-        echo "      </tr>" >> ./build_results.html
-        echo "      <tr>" >> ./build_results.html
-        echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-tag\"></span> Commit ID</td>" >> ./build_results.html
-        echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./build_results.html
-        echo "      </tr>" >> ./build_results.html
-        if [ -e .git/CI_COMMIT_MSG ]
-        then
-            echo "      <tr>" >> ./build_results.html
-            echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-comment\"></span> Commit Message</td>" >> ./build_results.html
-            MSG=`cat .git/CI_COMMIT_MSG`
-            echo "        <td>$MSG</td>" >> ./build_results.html
-            echo "      </tr>" >> ./build_results.html
-        fi
+        echo ""
+        echo "Syntax Error: missing push information."
+        # TODO : list missing info
+        echo ""
+        exit 1
     fi
-    if [ $MR_TRIG -eq 1 ]
-    then
-        echo "      <tr>" >> ./build_results.html
-        echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-log-out\"></span> Source Branch</td>" >> ./build_results.html
-        echo "        <td>$SOURCE_BRANCH</td>" >> ./build_results.html
-        echo "      </tr>" >> ./build_results.html
-        echo "      <tr>" >> ./build_results.html
-        echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-tag\"></span> Source Commit ID</td>" >> ./build_results.html
-        echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./build_results.html
-        echo "      </tr>" >> ./build_results.html
-        if [ -e .git/CI_COMMIT_MSG ]
-        then
-            echo "      <tr>" >> ./build_results.html
-            echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-comment\"></span> Source Commit Message</td>" >> ./build_results.html
-            MSG=`cat .git/CI_COMMIT_MSG`
-            echo "        <td>$MSG</td>" >> ./build_results.html
-            echo "      </tr>" >> ./build_results.html
-        fi
-        echo "      <tr>" >> ./build_results.html
-        echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-log-in\"></span> Target Branch</td>" >> ./build_results.html
-        echo "        <td>$TARGET_BRANCH</td>" >> ./build_results.html
-        echo "      </tr>" >> ./build_results.html
-        echo "      <tr>" >> ./build_results.html
-        echo "        <td bgcolor = \"lightcyan\" > <span class=\"glyphicon glyphicon-tag\"></span> Target Commit ID</td>" >> ./build_results.html
-        echo "        <td>$TARGET_COMMIT_ID</td>" >> ./build_results.html
-        echo "      </tr>" >> ./build_results.html
-    fi
-    echo "   </table>" >> ./build_results.html
-    echo "   <h2>Build Summary</h2>" >> ./build_results.html
+fi
 
-    if [ -f ./oai_rules_result.txt ]
+if [ $MR_TRIG -eq 1 ]
+then
+    if [ $mr_checker -ne 15 ]
     then
-        echo "   <h3>OAI Coding / Formatting Guidelines Check</h3>" >> ./build_results.html
-        NB_FILES=`cat ./oai_rules_result.txt`
-        if [ $NB_FILES = "0" ]
-        then 
-            echo "   <div class=\"alert alert-success\">" >> ./build_results.html
-            if [ $PU_TRIG -eq 1 ]; then echo "      <strong>All files in repository follow OAI rules. <span class=\"glyphicon glyphicon-ok-circle\"></span></strong>" >> ./build_results.html; fi
-            if [ $MR_TRIG -eq 1 ]; then echo "      <strong>All modified files in Merge-Request follow OAI rules. <span class=\"glyphicon glyphicon-ok-circle\"></span></strong>" >> ./build_results.html; fi
-            echo "   </div>" >> ./build_results.html
-        else
-            echo "   <div class=\"alert alert-warning\">" >> ./build_results.html
-            if [ $PU_TRIG -eq 1 ]; then echo "      <strong>$NB_FILES files in repository DO NOT follow OAI rules. <span class=\"glyphicon glyphicon-warning-sign\"></span></strong>" >> ./build_results.html; fi
-            if [ $MR_TRIG -eq 1 ]; then echo "      <strong>$NB_FILES modified files in Merge-Request DO NOT follow OAI rules. <span class=\"glyphicon glyphicon-warning-sign\"></span></strong>" >> ./build_results.html; fi
-            echo "   </div>" >> ./build_results.html
-        fi
+        echo ""
+        echo "Syntax Error: missing merge-request information."
+        # TODO : list missing info
+        echo ""
+        exit 1
+    fi
+fi
+
+echo "<!DOCTYPE html>" > ./build_results.html
+echo "<html class=\"no-js\" lang=\"en-US\">" >> ./build_results.html
+echo "<head>" >> ./build_results.html
+echo "  <title>Build Results for $JOB_NAME job build #$BUILD_ID</title>" >> ./build_results.html
+echo "  <base href = \"http://www.openairinterface.org/\" />" >> ./build_results.html
+echo "</head>" >> ./build_results.html
+echo "<body>" >> ./build_results.html
+echo "  <table style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
+echo "    <tr style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
+echo "      <td style=\"border-collapse: collapse; border: none;\">" >> ./build_results.html
+echo "        <a href=\"http://www.openairinterface.org/\">" >> ./build_results.html
+echo "           <img src=\"/wp-content/uploads/2016/03/cropped-oai_final_logo2.png\" alt=\"\" border=\"none\" height=50 width=150>" >> ./build_results.html
+echo "           </img>" >> ./build_results.html
+echo "        </a>" >> ./build_results.html
+echo "      </td>" >> ./build_results.html
+echo "      <td style=\"border-collapse: collapse; border: none; vertical-align: center;\">" >> ./build_results.html
+echo "        <b><font size = \"6\">Job Summary -- Job: $JOB_NAME -- Build-ID: $BUILD_ID</font></b>" >> ./build_results.html
+echo "      </td>" >> ./build_results.html
+echo "    </tr>" >> ./build_results.html
+echo "  </table>" >> ./build_results.html
+echo "  <br>" >> ./build_results.html
+echo "   <table border = \"1\">" >> ./build_results.html
+echo "      <tr>" >> ./build_results.html
+echo "        <td bgcolor = \"lightcyan\" >Build Start Time (UTC)</td>" >> ./build_results.html
+echo "        <td>TEMPLATE_BUILD_TIME</td>" >> ./build_results.html
+echo "      </tr>" >> ./build_results.html
+echo "      <tr>" >> ./build_results.html
+echo "        <td bgcolor = \"lightcyan\" >GIT Repository</td>" >> ./build_results.html
+echo "        <td>$GIT_URL</td>" >> ./build_results.html
+echo "      </tr>" >> ./build_results.html
+echo "      <tr>" >> ./build_results.html
+echo "        <td bgcolor = \"lightcyan\" >Job Trigger</td>" >> ./build_results.html
+if [ $PU_TRIG -eq 1 ]; then echo "        <td>Push Event</td>" >> ./build_results.html; fi
+if [ $MR_TRIG -eq 1 ]; then echo "        <td>Merge-Request</td>" >> ./build_results.html; fi
+echo "      </tr>" >> ./build_results.html
+if [ $PU_TRIG -eq 1 ]
+then
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Branch</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_BRANCH</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Commit ID</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+fi
+if [ $MR_TRIG -eq 1 ]
+then
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Source Branch</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_BRANCH</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Source Commit ID</td>" >> ./build_results.html
+    echo "        <td>$SOURCE_COMMIT_ID</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Target Branch</td>" >> ./build_results.html
+    echo "        <td>$TARGET_BRANCH</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Target Commit ID</td>" >> ./build_results.html
+    echo "        <td>$TARGET_COMMIT_ID</td>" >> ./build_results.html
+    echo "      </tr>" >> ./build_results.html
+fi
+echo "   </table>" >> ./build_results.html
+echo "   <h2>Build Summary</h2>" >> ./build_results.html
+
+if [ -f ./oai_rules_result.txt ]
+then
+    echo "   <h3>OAI Coding / Formatting Guidelines Check</h3>" >> ./build_results.html
+    echo "   <table border = "1">" >> ./build_results.html
+    echo "      <tr>" >> ./build_results.html
+    echo "        <td bgcolor = \"lightcyan\" >Result:</td>" >> ./build_results.html
+    NB_FILES=`cat ./oai_rules_result.txt`
+    if [ $NB_FILES = "0" ]
+    then 
+        if [ $PU_TRIG -eq 1 ]; then echo "        <td bgcolor = \"green\">All files in repository follow OAI rules. </td>" >> ./build_results.html; fi
+        if [ $MR_TRIG -eq 1 ]; then echo "        <td bgcolor = \"green\">All modified files in Merge-Request follow OAI rules.</td>" >> ./build_results.html; fi
+        echo "      </tr>" >> ./build_results.html
+        echo "   </table>" >> ./build_results.html
+    else
+        if [ $PU_TRIG -eq 1 ]; then echo "        <td bgcolor = \"orange\">$NB_FILES files in repository DO NOT follow OAI rules. </td>" >> ./build_results.html; fi
+        if [ $MR_TRIG -eq 1 ]; then echo "        <td bgcolor = \"orange\">$NB_FILES modified files in Merge-Request DO NOT follow OAI rules.</td>" >> ./build_results.html; fi
+        echo "      </tr>" >> ./build_results.html
         if [ -f ./oai_rules_result_list.txt ]
         then
-            echo "   <button data-toggle=\"collapse\" data-target=\"#oai-formatting-details\">More details on formatting check</button>" >> ./build_results.html
-            echo "   <div id=\"oai-formatting-details\" class=\"collapse\">" >> ./build_results.html
-            echo "   <p>Please apply the following command to this(ese) file(s): </p>" >> ./build_results.html
-            echo "   <p style=\"margin-left: 30px\"><strong><code>astyle --options=ci-scripts/astyle-options.txt filename(s)</code></strong></p>" >> ./build_results.html
-            echo "   <table border = 1>" >> ./build_results.html
-            echo "      <tr>" >> ./build_results.html
-            echo "        <th bgcolor = \"lightcyan\" >Filename</th>" >> ./build_results.html
-            echo "      </tr>" >> ./build_results.html
-            awk '{print "      <tr><td>"$1"</td></tr>"}' ./oai_rules_result_list.txt >> ./build_results.html
-            echo "   </table>" >> ./build_results.html
-            echo "   </div>" >> ./build_results.html
+            awk '{print "      <tr><td></td><td>"$1"</td></tr>"}' ./oai_rules_result_list.txt >> ./build_results.html
         fi
+        echo "   </table>" >> ./build_results.html
+        echo "   <p>Please apply the following command to this(ese) file(s): </p>" >> ./build_results.html
+        echo "   <p style=\"margin-left: 30px\"><strong><code>astyle --options=ci-scripts/astyle-options.txt filename(s)</code></strong></p>" >> ./build_results.html
     fi
+fi
 
-    echo "   <h2>Ubuntu 16.04 LTS -- Summary</h2>" >> ./build_results.html
+echo "   <h2>Ubuntu 16.04 LTS -- Summary</h2>" >> ./build_results.html
 
-    sca_summary_table_header ./archives/cppcheck/cppcheck.xml "OAI Static Code Analysis with CPPCHECK"
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized variable" uninitvar
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized struct member" uninitStructMember
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory leak" memleak
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory is freed twice" doubleFree
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Resource leak" resourceLeak
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Possible null pointer dereference" nullPointer
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Array access  out of bounds" arrayIndexOutOfBounds
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Buffer is accessed out of bounds" bufferAccessOutOfBounds
-    sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Expression depends on order of evaluation of side effects" unknownEvaluationOrder
-    sca_summary_table_footer ./archives/cppcheck/cppcheck.xml
+sca_summary_table_header "OAI Static Code Analysis with CPPCHECK"
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized variable" uninitvar
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Uninitialized struct member" uninitStructMember
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory leak" memleak
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Memory is freed twice" doubleFree
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Resource leak" resourceLeak
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Possible null pointer dereference" nullPointer
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Array access  out of bounds" arrayIndexOutOfBounds
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Buffer is accessed out of bounds" bufferAccessOutOfBounds
+sca_summary_table_row ./archives/cppcheck/cppcheck.xml "Expression depends on order of evaluation of side effects" unknownEvaluationOrder
+sca_summary_table_footer ./archives/cppcheck/cppcheck.xml
 
-    summary_table_header "OAI Build eNB -- USRP option" ./archives/enb_usrp
-    summary_table_row "LTE SoftModem - Release 14" ./archives/enb_usrp/lte-softmodem.Rel14.txt "Built target lte-softmodem" ./enb_usrp_row1.html
-    summary_table_row "Coding - Release 14" ./archives/enb_usrp/coding.Rel14.txt "Built target coding" ./enb_usrp_row2.html
-    summary_table_row "OAI USRP device if - Release 14" ./archives/enb_usrp/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./enb_usrp_row3.html
-    summary_table_row "Parameters Lib Config - Release 14" ./archives/enb_usrp/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_usrp_row4.html
-    summary_table_footer
+summary_table_header "OAI Build eNB -- USRP option"
+summary_table_row "LTE SoftModem - Release 14" ./archives/enb_usrp/lte-softmodem.Rel14.txt "Built target lte-softmodem" ./enb_usrp_row1.html
+summary_table_row "Coding - Release 14" ./archives/enb_usrp/coding.Rel14.txt "Built target coding" ./enb_usrp_row2.html
+summary_table_row "OAI USRP device if - Release 14" ./archives/enb_usrp/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./enb_usrp_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/enb_usrp/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_usrp_row4.html
+summary_table_footer
 
-    summary_table_header "OAI Build basic simulator option" ./archives/basic_sim
-    summary_table_row "Basic Simulator eNb - Release 14" ./archives/basic_sim/basic_simulator_enb.txt "Built target lte-softmodem" ./basic_sim_row1.html
-    summary_table_row "Basic Simulator UE - Release 14" ./archives/basic_sim/basic_simulator_ue.txt "Built target lte-uesoftmodem" ./basic_sim_row2.html
-    summary_table_row "Conf 2 UE data - Release 14" ./archives/basic_sim/conf2uedata.Rel14.txt "Built target conf2uedata" ./basic_sim_row3.html
-    summary_table_footer
+summary_table_header "OAI Build basic simulator option"
+summary_table_row "Basic Simulator eNb - Release 14" ./archives/basic_sim/basic_simulator_enb.txt "Built target lte-softmodem" ./basic_sim_row1.html
+summary_table_row "Basic Simulator UE - Release 14" ./archives/basic_sim/basic_simulator_ue.txt "Built target lte-uesoftmodem" ./basic_sim_row2.html
+summary_table_row "Conf 2 UE data - Release 14" ./archives/basic_sim/conf2uedata.Rel14.txt "Built target conf2uedata" ./basic_sim_row3.html
+summary_table_footer
 
-    summary_table_header "OAI Build Physical simulators option" ./archives/phy_sim
-    summary_table_row "DL Simulator - Release 14" ./archives/phy_sim/dlsim.Rel14.txt "Built target dlsim" ./phy_sim_row1.html
-    summary_table_row "UL Simulator - Release 14" ./archives/phy_sim/ulsim.Rel14.txt "Built target ulsim" ./phy_sim_row2.html
-    summary_table_row "Coding - Release 14" ./archives/phy_sim/coding.Rel14.txt "Built target coding" ./phy_sim_row3.html
-    summary_table_footer
+summary_table_header "OAI Build Physical simulators option"
+summary_table_row "DL Simulator - Release 14" ./archives/phy_sim/dlsim.Rel14.txt "Built target dlsim" ./phy_sim_row1.html
+summary_table_row "UL Simulator - Release 14" ./archives/phy_sim/ulsim.Rel14.txt "Built target ulsim" ./phy_sim_row2.html
+summary_table_row "Coding - Release 14" ./archives/phy_sim/coding.Rel14.txt "Built target coding" ./phy_sim_row3.html
+summary_table_footer
 
+summary_table_header "OAI Build eNB -- ETHERNET transport option"
+summary_table_row "LTE SoftModem w/o S1 - Release 14" ./archives/enb_eth/lte-softmodem-nos1.Rel14.txt "Built target lte-softmodem" ./enb_eth_row1.html
+summary_table_row "Coding - Release 14" ./archives/enb_eth/coding.Rel14.txt "Built target coding" ./enb_eth_row2.html
+summary_table_row "OAI ETHERNET transport - Release 14" ./archives/enb_eth/oai_eth_transpro.Rel14.txt "Built target oai_eth_transpro" ./enb_eth_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/enb_eth/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_eth_row4.html
+summary_table_row "RB Tools - Release 14" ./archives/enb_eth/rb_tool.Rel14.txt "Built target rb_tool" ./enb_eth_row5.html
+summary_table_row "NAS Mesh - Release 14" ./archives/enb_eth/nasmesh.Rel14.txt "Built target nasmesh" ./enb_eth_row6.html
+summary_table_footer
 
-    if [ -f archives/gnb_usrp/nr-softmodem.Rel14.txt ]
-    then
-        summary_table_header "OAI Build gNB -- USRP option" ./archives/gnb_usrp
-        summary_table_row "LTE SoftModem - Release 14" ./archives/gnb_usrp/nr-softmodem.Rel14.txt "Built target nr-softmodem" ./gnb_usrp_row1.html
-        summary_table_row "Coding - Release 14" ./archives/gnb_usrp/coding.Rel14.txt "Built target coding" ./gnb_usrp_row2.html
-        summary_table_row "OAI USRP device if - Release 14" ./archives/gnb_usrp/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./gnb_usrp_row3.html
-        summary_table_row "Parameters Lib Config - Release 14" ./archives/gnb_usrp/params_libconfig.Rel14.txt "Built target params_libconfig" ./gnb_usrp_row4.html
-        summary_table_footer
-    fi
+summary_table_header "OAI Build UE -- ETHERNET transport option"
+summary_table_row "LTE UE SoftModem w/o S1 - Release 14" ./archives/ue_eth/lte-uesoftmodem-nos1.Rel14.txt "Built target lte-uesoftmodem" ./ue_eth_row1.html
+summary_table_row "Coding - Release 14" ./archives/ue_eth/coding.Rel14.txt "Built target coding" ./ue_eth_row2.html
+summary_table_row "OAI ETHERNET transport - Release 14" ./archives/ue_eth/oai_eth_transpro.Rel14.txt "Built target oai_eth_transpro" ./ue_eth_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/ue_eth/params_libconfig.Rel14.txt "Built target params_libconfig" ./ue_eth_row4.html
+summary_table_row "RB Tools - Release 14" ./archives/ue_eth/rb_tool.Rel14.txt "Built target rb_tool" ./ue_eth_row5.html
+summary_table_row "NAS Mesh - Release 14" ./archives/ue_eth/nasmesh.Rel14.txt "Built target nasmesh" ./ue_eth_row6.html
+summary_table_footer
 
-    if [ -f archives/nrue_usrp/nr-uesoftmodem.Rel14.txt ]
-    then
-        summary_table_header "OAI Build 5G NR UE -- USRP option" ./archives/nrue_usrp
-        summary_table_row "UE SoftModem - Release 14" ./archives/nrue_usrp/nr-uesoftmodem.Rel14.txt "Built target nr-uesoftmodem" ./nrue_usrp_row1.html
-        summary_table_row "Coding - Release 14" ./archives/nrue_usrp/coding.Rel14.txt "Built target coding" ./nrue_usrp_row2.html
-        summary_table_row "OAI USRP device if - Release 14" ./archives/nrue_usrp/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./nrue_usrp_row3.html
-        summary_table_row "Parameters Lib Config - Release 14" ./archives/nrue_usrp/params_libconfig.Rel14.txt "Built target params_libconfig" ./nrue_usrp_row4.html
-        summary_table_footer
-    fi
+echo "   <h2>Red Hat (CentOS Linux release 7.4.1708) -- Summary</h2>" >> ./build_results.html
 
-    summary_table_header "OAI Build eNB -- ETHERNET transport option" ./archives/enb_eth
-    summary_table_row "LTE SoftModem w/o S1 - Release 14" ./archives/enb_eth/lte-softmodem-nos1.Rel14.txt "Built target lte-softmodem" ./enb_eth_row1.html
-    summary_table_row "Coding - Release 14" ./archives/enb_eth/coding.Rel14.txt "Built target coding" ./enb_eth_row2.html
-    summary_table_row "OAI ETHERNET transport - Release 14" ./archives/enb_eth/oai_eth_transpro.Rel14.txt "Built target oai_eth_transpro" ./enb_eth_row3.html
-    summary_table_row "Parameters Lib Config - Release 14" ./archives/enb_eth/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_eth_row4.html
-    summary_table_row "RB Tools - Release 14" ./archives/enb_eth/rb_tool.Rel14.txt "Built target rb_tool" ./enb_eth_row5.html
-    summary_table_row "NAS Mesh - Release 14" ./archives/enb_eth/nasmesh.Rel14.txt "Built target nasmesh" ./enb_eth_row6.html
-    summary_table_footer
+summary_table_header "Red Hat -- OAI Build eNB -- USRP option"
+summary_table_row "LTE SoftModem - Release 14" ./archives/red_hat/lte-softmodem.Rel14.txt "Built target lte-softmodem" ./enb_usrp_rh_row1.html
+summary_table_row "Coding - Release 14" ./archives/red_hat/coding.Rel14.txt "Built target coding" ./enb_usrp_rh_row2.html
+summary_table_row "OAI USRP device if - Release 14" ./archives/red_hat/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./enb_usrp_rh_row3.html
+summary_table_row "Parameters Lib Config - Release 14" ./archives/red_hat/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_usrp_rh_row4.html
+summary_table_footer
 
-    summary_table_header "OAI Build UE -- ETHERNET transport option" ./archives/ue_eth
-    summary_table_row "LTE UE SoftModem w/o S1 - Release 14" ./archives/ue_eth/lte-uesoftmodem-nos1.Rel14.txt "Built target lte-uesoftmodem" ./ue_eth_row1.html
-    summary_table_row "Coding - Release 14" ./archives/ue_eth/coding.Rel14.txt "Built target coding" ./ue_eth_row2.html
-    summary_table_row "OAI ETHERNET transport - Release 14" ./archives/ue_eth/oai_eth_transpro.Rel14.txt "Built target oai_eth_transpro" ./ue_eth_row3.html
-    summary_table_row "Parameters Lib Config - Release 14" ./archives/ue_eth/params_libconfig.Rel14.txt "Built target params_libconfig" ./ue_eth_row4.html
-    summary_table_row "RB Tools - Release 14" ./archives/ue_eth/rb_tool.Rel14.txt "Built target rb_tool" ./ue_eth_row5.html
-    summary_table_row "NAS Mesh - Release 14" ./archives/ue_eth/nasmesh.Rel14.txt "Built target nasmesh" ./ue_eth_row6.html
-    summary_table_footer
+echo "   <h3>Details</h3>" >> ./build_results.html
 
-    if [ -e ./archives/red_hat ]
-    then
-        echo "   <h2>Red Hat Enterprise Linux Server release 7.6) -- Summary</h2>" >> ./build_results.html
+for DETAILS_TABLE in `ls ./enb_usrp_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./basic_sim_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./phy_sim_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./enb_eth_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./ue_eth_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+for DETAILS_TABLE in `ls ./enb_usrp_rh_row*.html`
+do
+    cat $DETAILS_TABLE >> ./build_results.html
+done
+rm -f ./enb_usrp_row*.html ./basic_sim_row*.html ./phy_sim_row*.html ./enb_eth_row*.html ./ue_eth_row*.html ./enb_usrp_rh_row*.html
 
-        summary_table_header "Red Hat -- OAI Build eNB -- USRP option" ./archives/red_hat
-        summary_table_row "LTE SoftModem - Release 14" ./archives/red_hat/lte-softmodem.Rel14.txt "Built target lte-softmodem" ./enb_usrp_rh_row1.html
-        summary_table_row "Coding - Release 14" ./archives/red_hat/coding.Rel14.txt "Built target coding" ./enb_usrp_rh_row2.html
-        summary_table_row "OAI USRP device if - Release 14" ./archives/red_hat/oai_usrpdevif.Rel14.txt "Built target oai_usrpdevif" ./enb_usrp_rh_row3.html
-        summary_table_row "Parameters Lib Config - Release 14" ./archives/red_hat/params_libconfig.Rel14.txt "Built target params_libconfig" ./enb_usrp_rh_row4.html
-        summary_table_footer
-    fi
+echo "</body>" >> ./build_results.html
+echo "</html>" >> ./build_results.html
 
-    echo "   <h3>Details</h3>" >> ./build_results.html
-    echo "   <button data-toggle=\"collapse\" data-target=\"#oai-compilation-details\">Details for Compilation Errors and Warnings </button>" >> ./build_results.html
-    echo "   <div id=\"oai-compilation-details\" class=\"collapse\">" >> ./build_results.html
-
-    for DETAILS_TABLE in `ls ./enb_usrp_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-    for DETAILS_TABLE in `ls ./basic_sim_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-    for DETAILS_TABLE in `ls ./phy_sim_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-
-    for DETAILS_TABLE in `ls ./gnb_usrp_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-    for DETAILS_TABLE in `ls ./nrue_usrp_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-    for DETAILS_TABLE in `ls ./enb_eth_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-    for DETAILS_TABLE in `ls ./ue_eth_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-    if [ -e ./archives/red_hat ]
-    then
-    for DETAILS_TABLE in `ls ./enb_usrp_rh_row*.html`
-    do
-        cat $DETAILS_TABLE >> ./build_results.html
-    done
-    fi
-    rm -f ./*_row*.html
-
-    echo "   </div>" >> ./build_results.html
-    echo "   <p></p>" >> ./build_results.html
-    echo "   <div class=\"well well-lg\">End of Build Report -- Copyright <span class=\"glyphicon glyphicon-copyright-mark\"></span> 2018 <a href=\"http://www.openairinterface.org/\">OpenAirInterface</a>. All Rights Reserved.</div>" >> ./build_results.html
-    echo "</div></body>" >> ./build_results.html
-    echo "</html>" >> ./build_results.html
-}
+exit 0

ci-scripts/tcp_iperf_stats.awk

@@ -1,23 +1,3 @@
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
 BEGIN{max=0;min=10000}
 {
     if ($0 ~/Mbits/) {

ci-scripts/waitBuildOnVM.sh

@@ -1,194 +0,0 @@
-#!/bin/bash
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
-
-function wait_usage {
-    echo "OAI CI VM script"
-    echo "   Original Author: Raphael Defosseux"
-    echo "   Requirements:"
-    echo "     -- uvtool uvtool-libvirt apt-cacher"
-    echo "     -- xenial image already synced"
-    echo "   Default:"
-    echo "     -- eNB with USRP"
-    echo ""
-    echo "Usage:"
-    echo "------"
-    echo "    oai-ci-vm-tool wait [OPTIONS]"
-    echo ""
-    echo "Mandatory Options:"
-    echo "--------"
-    echo "    --job-name #### OR -jn ####"
-    echo "    Specify the name of the Jenkins job."
-    echo ""
-    echo "    --build-id #### OR -id ####"
-    echo "    Specify the build ID of the Jenkins job."
-    echo ""
-    echo "    --workspace #### OR -ws ####"
-    echo "    Specify the workspace."
-    echo ""
-    variant_usage
-    echo "    Specify the variant to build."
-    echo ""
-    echo "Options:"
-    echo "--------"
-    echo "    --keep-vm-alive OR -k"
-    echo "    Keep the VM alive after the build."
-    echo ""
-    echo "    --help OR -h"
-    echo "    Print this help message."
-    echo ""
-}
-
-function wait_on_vm_build {
-    echo "############################################################"
-    echo "OAI CI VM script"
-    echo "############################################################"
-
-    echo "VM_NAME             = $VM_NAME"
-    echo "VM_CMD_FILE         = $VM_CMDS"
-    echo "JENKINS_WKSP        = $JENKINS_WKSP"
-    echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
-    echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
-
-    IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
-
-    if [ $IS_VM_ALIVE -eq 0 ]
-    then
-        echo "############################################################"
-        echo "You should have created the VM before doing anything"
-        echo "############################################################"
-        STATUS=1
-        return
-    fi
-
-    echo "Waiting for VM to be started"
-    uvt-kvm wait $VM_NAME --insecure
-
-    VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
-    echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
-
-    echo "############################################################"
-    echo "Waiting build process to end on VM ($VM_NAME)"
-    echo "############################################################"
-
-    if [[ "$VM_NAME" == *"-cppcheck"* ]]
-    then
-        echo "echo \"ps -aux | grep cppcheck \"" >> $VM_CMDS
-        echo "while [ \$(ps -aux | grep --color=never cppcheck | grep -v grep | wc -l) -gt 0 ]; do sleep 3; done" >> $VM_CMDS
-    else
-        echo "echo \"ps -aux | grep build \"" >> $VM_CMDS
-        echo "while [ \$(ps -aux | grep --color=never build_oai | grep -v grep | wc -l) -gt 0 ]; do sleep 3; done" >> $VM_CMDS
-    fi
-
-    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
-    rm -f $VM_CMDS
-}
-
-function check_on_vm_build {
-    echo "############################################################"
-    echo "Creating a tmp folder to store results and artifacts"
-    echo "############################################################"
-    if [ ! -d $JENKINS_WKSP/archives ]
-    then
-        mkdir $JENKINS_WKSP/archives
-    fi
-
-    if [ ! -d $ARCHIVES_LOC ]
-    then
-        mkdir $ARCHIVES_LOC
-    fi
-
-    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.txt $ARCHIVES_LOC
-    if [[ "$VM_NAME" == *"-cppcheck"* ]]
-    then
-        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.xml $ARCHIVES_LOC
-    fi
-
-    if [ $KEEP_VM_ALIVE -eq 0 ]
-    then
-        echo "############################################################"
-        echo "Destroying VM"
-        echo "############################################################"
-        uvt-kvm destroy $VM_NAME
-        ssh-keygen -R $VM_IP_ADDR
-    fi
-    rm -f $VM_CMDS
-
-    echo "############################################################"
-    echo "Checking build status" 
-    echo "############################################################"
-
-    if [[ "$VM_NAME" == *"-cppcheck"* ]]
-    then
-        LOG_FILES=`ls $ARCHIVES_LOC/*.txt $ARCHIVES_LOC/*.xml`
-    else
-        LOG_FILES=`ls $ARCHIVES_LOC/*.txt`
-    fi
-    STATUS=0
-    NB_FOUND_FILES=0
-
-    for FULLFILE in $LOG_FILES 
-    do
-        if [[ $FULLFILE == *"$LOG_PATTERN"* ]]
-        then
-            filename=$(basename -- "$FULLFILE")
-            if [ "$LOG_PATTERN" == ".Rel14.txt" ]
-            then
-                PASS_PATTERN=`echo $filename | sed -e "s#$LOG_PATTERN##"`
-            fi
-            if [ "$LOG_PATTERN" == "basic_simulator" ]
-            then
-                PASS_PATTERN="lte-"
-            fi
-            if [ "$LOG_PATTERN" == "cppcheck.xml" ]
-            then
-                PASS_PATTERN="results version"
-                LOCAL_STAT=`egrep -c "$PASS_PATTERN" $FULLFILE`
-            else
-                LOCAL_STAT=`egrep -c "Built target $PASS_PATTERN" $FULLFILE`
-            fi
-            if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
-            NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
-        fi
-    done
-
-    if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]
-    then
-        echo "Expecting $NB_PATTERN_FILES log files and found $NB_FOUND_FILES"
-        STATUS=-1
-    fi
-
-    # If we were building the FlexRan Controller, flag-touch for basic-simulator to continue
-    if [[ "$VM_NAME" == *"-flexran-rtc"* ]]
-    then
-        if [[ $STATUS -eq 0 ]]
-        then
-            touch $JENKINS_WKSP/flexran/flexran_build_complete.txt
-        fi
-    fi
-
-    if [[ $STATUS -eq 0 ]]
-    then
-        echo "BUILD_OK" > $ARCHIVES_LOC/build_final_status.log
-    else
-        echo "BUILD_KO" > $ARCHIVES_LOC/build_final_status.log
-    fi
-}

ci-scripts/xml_files/enb_usrp210_band40_build.xml

@@ -1,54 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-        <TestCaseRequestedList>
- 010101
- 050101 060101 070101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build eNB (USRP)</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-	</testCase>
-
-        <testCase id="050101">
-		<class>Initialize_HSS</class>
-		<desc>Initialize HSS</desc>
-        </testCase>
-
-	<testCase id="060101">
-		<class>Initialize_MME</class>
-		<desc>Initialize MME</desc>
-	</testCase>
-
-	<testCase id="070101">
-		<class>Initialize_SPGW</class>
-		<desc>Initialize SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band40_epc_closure.xml

@@ -1,47 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-closure</htmlTabRef>
-	<htmlTabName>EPC-Closure</htmlTabName>
-	<htmlTabIcon>log-out</htmlTabIcon>
-        <TestCaseRequestedList>
- 050201 060201 070201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-        <testCase id="050201">
-                <class>Terminate_HSS</class>
-                <desc>Terminate HSS</desc>
-        </testCase>
-
-        <testCase id="060201">
-                <class>Terminate_MME</class>
-                <desc>Terminate MME</desc>
-        </testCase>
-
-        <testCase id="070201">
-                <class>Terminate_SPGW</class>
-                <desc>Terminate SPGW</desc>
-        </testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band40_test_05mhz_tm1.xml

@@ -1,119 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-05-tm1</htmlTabRef>
-	<htmlTabName>Test-05MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-        <TestCaseRequestedList>
- 040101
- 030104 040301 040501 040602 040601 040603 040642 040641 040643 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030104">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (TDD/Band40/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040501">
-                <class>Ping</class>
-                <desc>ping (5MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>25</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040601">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(balanced)</desc>
-		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040602">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040603">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-        </testCase>
-
-	<testCase id="040641">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(balanced)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040642">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040643">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band40_test_20mhz_tm1.xml

@@ -1,119 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-20-tm1</htmlTabRef>
-	<htmlTabName>Test-20MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-        <TestCaseRequestedList>
- 040101
- 030124 040301 040521 040622 040621 040623 040662 040661 040663 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030124">
-                <class>Initialize_eNB</class>
-                <desc>Initialize eNB (TDD/Band40/20MHz/info)</desc>
-                <Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf</Initialize_eNB_args>
-        </testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040521">
-                <class>Ping</class>
-                <desc>ping (20MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>25</ping_packetloss_threshold>
-        </testCase>
-
-	<testCase id="040621">
-                <class>Iperf</class>
-                <desc>iperf (20MHz - DL/13.5Mbps/UDP)(30 sec)(balanced)</desc>
-                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
-                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-                <iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040622">
-                <class>Iperf</class>
-                <desc>iperf (20MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
-                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
-                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-                <iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-	<testCase id="040623">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/13.5Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040661">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/2Mbps/UDP)(30 sec)(balanced)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040662">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040663">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/2Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band40_tracer.xml

@@ -1,65 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>tracer-test</htmlTabRef>
-	<htmlTabName>T-Tracer</htmlTabName>
-	<htmlTabIcon>duplicate</htmlTabIcon>
-        <TestCaseRequestedList>
- 040101
- 030100 040300 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030100">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (TDD/Band40/5MHz) with T Tracer on</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf --T_stdout 0</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040300">
-                <class>Attach_UE</class>
-                <desc>Attach single UE</desc>
-                <nbMaxUEtoAttach>1</nbMaxUEtoAttach>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7.xml

@@ -0,0 +1,350 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<TestCaseRequestedList>
+ 010101
+ 050101 060101 070101 040101
+ 030101 040301 040501 040603 040604 040605 040606 040607 040641 040642 040643 040644 040401 040201 030201
+ 030111 040301 040511 040613 040614 040615 040616 040617 040651 040652 040653 040654 040401 040201 030201
+ 030121 040301 040521 040623 040624 040625 040626 040627 040662 040661 040663 040664 040401 040201 030201
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030111">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/10MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030121">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/20MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040511">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040521">
+                <class>Ping</class>
+                <desc>ping (20MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040605">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040606">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040607">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040644">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040613">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040614">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040615">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040616">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040617">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+	<testCase id="040651">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040652">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040653">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040654">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040623">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040624">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040625">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040626">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040627">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+	<testCase id="040661">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/20Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040662">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040663">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040664">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+	<testCase id="050201">
+		<class>Terminate_HSS</class>
+		<desc>Terminate HSS</desc>
+	</testCase>
+
+	<testCase id="060201">
+		<class>Terminate_MME</class>
+		<desc>Terminate MME</desc>
+	</testCase>
+
+	<testCase id="070201">
+		<class>Terminate_SPGW</class>
+		<desc>Terminate SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7_build.xml

@@ -1,54 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-	<TestCaseRequestedList>
- 010101
- 050101 060101 070101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build eNB (USRP)</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-	</testCase>
-
-        <testCase id="050101">
-		<class>Initialize_HSS</class>
-		<desc>Initialize HSS</desc>
-        </testCase>
-
-	<testCase id="060101">
-		<class>Initialize_MME</class>
-		<desc>Initialize MME</desc>
-	</testCase>
-
-	<testCase id="070101">
-		<class>Initialize_SPGW</class>
-		<desc>Initialize SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7_epc_closure.xml

@@ -1,47 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-closure</htmlTabRef>
-	<htmlTabName>EPC-Closure</htmlTabName>
-	<htmlTabIcon>log-out</htmlTabIcon>
-	<TestCaseRequestedList>
- 050201 060201 070201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="050201">
-		<class>Terminate_HSS</class>
-		<desc>Terminate HSS</desc>
-	</testCase>
-
-	<testCase id="060201">
-		<class>Terminate_MME</class>
-		<desc>Terminate MME</desc>
-	</testCase>
-
-	<testCase id="070201">
-		<class>Terminate_SPGW</class>
-		<desc>Terminate SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7_test_05mhz_tm1.xml

@@ -1,143 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-05-tm1</htmlTabRef>
-	<htmlTabName>Test-05MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 040101
- 030101 040301 040501 040603 040604 040605 040606 040607 040641 040642 040643 040644 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030101">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040501">
-                <class>Ping</class>
-                <desc>ping (5MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>5</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040603">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040604">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040605">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(unbalanced profile)</desc>
-		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040606">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040607">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/TCP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-	<testCase id="040641">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040642">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-        <testCase id="040643">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040644">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/TCP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7_test_10mhz_tm1.xml

@@ -1,143 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-10-tm1</htmlTabRef>
-	<htmlTabName>Test-10MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 040101
- 030111 040301 040511 040613 040614 040615 040616 040617 040651 040652 040653 040654 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030111">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/10MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040511">
-                <class>Ping</class>
-                <desc>ping (10MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>5</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040613">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040614">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040615">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(unbalanced profile)</desc>
-		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040616">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040617">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - DL/TCP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-	<testCase id="040651">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040652">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-        <testCase id="040653">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040654">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - UL/TCP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7_test_20mhz_tm1.xml

@@ -1,143 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-20-tm1</htmlTabRef>
-	<htmlTabName>Test-20MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 040101
- 030121 040301 040521 040623 040624 040625 040662 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>040626 040627 040661 040663 040664</TestCaseExclusionList>
-
-	<testCase id="030121">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/20MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040521">
-                <class>Ping</class>
-                <desc>ping (20MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>5</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040623">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040624">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040625">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(unbalanced profile)</desc>
-		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040626">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040627">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/TCP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-	<testCase id="040661">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/12Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 12M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040662">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/17Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 17M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-        <testCase id="040663">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040664">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/TCP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7_tracer.xml

@@ -1,65 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>tracer-test</htmlTabRef>
-	<htmlTabName>T-Tracer</htmlTabName>
-	<htmlTabIcon>duplicate</htmlTabIcon>
-	<TestCaseRequestedList>
- 040101
- 030100 040300 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030100">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz) with T Tracer on</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --T_stdout 0</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040300">
-                <class>Attach_UE</class>
-                <desc>Attach single UE</desc>
-                <nbMaxUEtoAttach>1</nbMaxUEtoAttach>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrpb210_band40.xml

@@ -21,21 +21,43 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>test-10-tm1</htmlTabRef>
-	<htmlTabName>Test-10MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
         <TestCaseRequestedList>
- 040101
+ 010101
+ 050101 060101 070101 040101
+ 030104 040301 040501 040602 040601 040603 040642 040641 040643 040401 040201 030201
  030114 040301 040511 040612 040611 040613 040652 040651 040653 040401 040201 030201
+ 050201 060201 070201
 	</TestCaseRequestedList>
+	<!-- 20MHz is not stable enough to be run -->
+	<!--
+ 030124 040301 040521 040622 040621 040623 040662 040661 040663 040401 040201 030201
+	-->
 	<TestCaseExclusionList></TestCaseExclusionList>
 
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030104">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band40/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+	
 	<testCase id="030114">
                 <class>Initialize_eNB</class>
                 <desc>Initialize eNB (TDD/Band40/10MHz/info)</desc>
-                <Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf</Initialize_eNB_args>
+                <Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
         </testCase>
 
+	<testCase id="030106">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band40/20MHz/info)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+	</testCase>
+
 	<testCase id="030201">
 		<class>Terminate_eNB</class>
 		<desc>Terminate eNB</desc>
@@ -61,6 +83,13 @@
                 <desc>Detach UE</desc>
         </testCase>
 
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
         <testCase id="040511">
                 <class>Ping</class>
                 <desc>ping (10MHz - 20 sec)</desc>
@@ -68,6 +97,30 @@
                 <ping_packetloss_threshold>25</ping_packetloss_threshold>
         </testCase>
 
+        <testCase id="040601">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(balanced)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+        </testCase>
+
+        <testCase id="040602">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(unbalanced)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+        </testCase>
+
 	<testCase id="040611">
                 <class>Iperf</class>
                 <desc>iperf (10MHz - DL/13.5Mbps/UDP)(30 sec)(balanced)</desc>
@@ -92,6 +145,30 @@
 		<iperf_profile>unbalanced</iperf_profile>
 	</testCase>
 
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(balanced)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(unbalanced)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+	</testCase>
+
 	<testCase id="040651">
 		<class>Iperf</class>
 		<desc>iperf (10MHz - UL/2Mbps/UDP)(30 sec)(balanced)</desc>
@@ -116,4 +193,34 @@
 		<iperf_profile>unbalanced</iperf_profile>
 	</testCase>
 
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+        <testCase id="050201">
+                <class>Terminate_HSS</class>
+                <desc>Terminate HSS</desc>
+        </testCase>
+
+        <testCase id="060201">
+                <class>Terminate_MME</class>
+                <desc>Terminate MME</desc>
+        </testCase>
+
+        <testCase id="070201">
+                <class>Terminate_SPGW</class>
+                <desc>Terminate SPGW</desc>
+        </testCase>
+
 </testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band40.xml

@@ -0,0 +1,219 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<!-- Only 5MHz is tested since neither 10MHz nor 20MHz work in this configuration -->
+	<!-- Also no UL iperf in 5MHz (040642) -->
+        <TestCaseRequestedList>
+ 010101
+ 050101 060101 070101 040101
+ 030104 030105 040301 040501 040602 040401 040201 030201 030202
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<!--
+ 030104 030105 040301 040501 040602 040642 040401 040201 030201 030202
+ 030114 030115 040301 040511 040612 040652 040401 040201 030201 030202
+ 030124 030125 040301 040521 040622 040662 040401 040201 030201 030202
+	-->
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
+		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030104">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (TDD/Band40)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+	
+	<testCase id="030105">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (TDD/Band40/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+	
+	<testCase id="030114">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (TDD/Band40)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+	
+	<testCase id="030115">
+                <class>Initialize_eNB</class>
+                <desc>Initialize RCC (TDD/Band40/10MHz/info)</desc>
+                <Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+        </testCase>
+
+	<testCase id="030124">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (TDD/Band40)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+	
+	<testCase id="030125">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (TDD/Band40/20MHz/info)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RCC</desc>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030202">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RRU</desc>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040511">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040521">
+                <class>Ping</class>
+                <desc>ping (20MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>25</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040602">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040612">
+                <class>Iperf</class>
+                <desc>iperf (10MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
+                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
+                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+                <iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+        <testCase id="040622">
+                <class>Iperf</class>
+                <desc>iperf (20MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
+                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
+                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+                <iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040652">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040662">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
+		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+        <testCase id="050201">
+                <class>Terminate_HSS</class>
+                <desc>Terminate HSS</desc>
+        </testCase>
+
+        <testCase id="060201">
+                <class>Terminate_MME</class>
+                <desc>Terminate MME</desc>
+        </testCase>
+
+        <testCase id="070201">
+                <class>Terminate_SPGW</class>
+                <desc>Terminate SPGW</desc>
+        </testCase>
+
+</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band40_build.xml

@@ -1,55 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-        <TestCaseRequestedList>
- 010101
- 050101 060101 070101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
-		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
-	</testCase>
-
-        <testCase id="050101">
-		<class>Initialize_HSS</class>
-		<desc>Initialize HSS</desc>
-        </testCase>
-
-	<testCase id="060101">
-		<class>Initialize_MME</class>
-		<desc>Initialize MME</desc>
-	</testCase>
-
-	<testCase id="070101">
-		<class>Initialize_SPGW</class>
-		<desc>Initialize SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band40_epc_closure.xml

@@ -1,48 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-closure</htmlTabRef>
-	<htmlTabName>EPC-Closure</htmlTabName>
-	<htmlTabIcon>log-out</htmlTabIcon>
-        <TestCaseRequestedList>
- 050201 060201 070201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-        <testCase id="050201">
-                <class>Terminate_HSS</class>
-                <desc>Terminate HSS</desc>
-        </testCase>
-
-        <testCase id="060201">
-                <class>Terminate_MME</class>
-                <desc>Terminate MME</desc>
-        </testCase>
-
-        <testCase id="070201">
-                <class>Terminate_SPGW</class>
-                <desc>Terminate SPGW</desc>
-        </testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band40_test_05mhz.xml

@@ -1,103 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-05</htmlTabRef>
-	<htmlTabName>Test-05MHz</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-        <TestCaseRequestedList>
- 040101
- 030104 030105 040301 040501 040602 040642 040401 040201 030201 030202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="030104">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RRU (TDD/Band40)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-	
-	<testCase id="030105">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RCC (TDD/Band40/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-	
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RRU</desc>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040501">
-                <class>Ping</class>
-                <desc>ping (5MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>25</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040602">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-	<testCase id="040642">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band40_test_10mhz.xml

@@ -1,103 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-10</htmlTabRef>
-	<htmlTabName>Test-10MHz</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-        <TestCaseRequestedList>
- 040101
- 030114 030115 040301 040511 040612 040652 040401 040201 030201 030202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="030114">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RRU (TDD/Band40)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-	
-	<testCase id="030115">
-                <class>Initialize_eNB</class>
-                <desc>Initialize RCC (TDD/Band40/10MHz/info)</desc>
-                <Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-        </testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RRU</desc>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040511">
-                <class>Ping</class>
-                <desc>ping (10MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>25</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040612">
-                <class>Iperf</class>
-                <desc>iperf (10MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
-                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
-                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-                <iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-	<testCase id="040652">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band40_test_20mhz.xml

@@ -1,103 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-20</htmlTabRef>
-	<htmlTabName>Test-20MHz</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-        <TestCaseRequestedList>
- 040101
- 030124 030125 040301 040521 040622 040662 040401 040201 030201 030202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="030124">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RRU (TDD/Band40)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.tdd.band40.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-	
-	<testCase id="030125">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RCC (TDD/Band40/20MHz/info)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RRU</desc>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040521">
-                <class>Ping</class>
-                <desc>ping (20MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>25</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040622">
-                <class>Iperf</class>
-                <desc>iperf (20MHz - DL/13.5Mbps/UDP)(30 sec)(single-ue)</desc>
-                <iperf_args>-u -b 13.5M -t 30 -i 1</iperf_args>
-                <iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-                <iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-	<testCase id="040662">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7.xml

@@ -0,0 +1,217 @@
+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<!-- Only 5MHz is tested since neither 10MHz nor 20MHz work in this configuration -->
+	<TestCaseRequestedList>
+ 010101
+ 050101 060101 070101 040101
+ 030101 030102 040301 040501 040604 040642 040401 040201 030201 030202
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<!--
+ 030111 030112 040301 040511 040614 040652 040401 040201 030201 030202
+ 030121 030122 040301 040521 040624 040662 040401 040201 030201 030202
+	-->
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
+		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (FDD/Band7)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030102">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030111">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (FDD/Band7)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030112">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (FDD/Band7/10MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030121">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RRU (FDD/Band7)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030122">
+		<class>Initialize_eNB</class>
+		<desc>Initialize RCC (FDD/Band7/20MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RCC</desc>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030202">
+		<class>Terminate_eNB</class>
+		<desc>Terminate RRU</desc>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040501">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040511">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040614">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/32Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 32M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040652">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="040521">
+                <class>Ping</class>
+                <desc>ping (20MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040624">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040662">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/20Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+	<testCase id="050201">
+		<class>Terminate_HSS</class>
+		<desc>Terminate HSS</desc>
+	</testCase>
+
+	<testCase id="060201">
+		<class>Terminate_MME</class>
+		<desc>Terminate MME</desc>
+	</testCase>
+
+	<testCase id="070201">
+		<class>Terminate_SPGW</class>
+		<desc>Terminate SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7_build.xml

@@ -1,55 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-	<TestCaseRequestedList>
- 010101
- 050101 060101 070101 040101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
-		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
-	</testCase>
-
-        <testCase id="050101">
-		<class>Initialize_HSS</class>
-		<desc>Initialize HSS</desc>
-        </testCase>
-
-	<testCase id="060101">
-		<class>Initialize_MME</class>
-		<desc>Initialize MME</desc>
-	</testCase>
-
-	<testCase id="070101">
-		<class>Initialize_SPGW</class>
-		<desc>Initialize SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7_epc_closure.xml

@@ -1,48 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-closure</htmlTabRef>
-	<htmlTabName>EPC-Closure</htmlTabName>
-	<htmlTabIcon>log-out</htmlTabIcon>
-	<TestCaseRequestedList>
- 050201 060201 070201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="050201">
-		<class>Terminate_HSS</class>
-		<desc>Terminate HSS</desc>
-	</testCase>
-
-	<testCase id="060201">
-		<class>Terminate_MME</class>
-		<desc>Terminate MME</desc>
-	</testCase>
-
-	<testCase id="070201">
-		<class>Terminate_SPGW</class>
-		<desc>Terminate SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7_test_05mhz.xml

@@ -1,103 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-05</htmlTabRef>
-	<htmlTabName>Test-05MHz</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 040101
- 030101 030102 040301 040501 040604 040642 040401 040201 030201 030202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="030101">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RRU (FDD/Band7)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="030102">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RCC (FDD/Band7/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RRU</desc>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040501">
-                <class>Ping</class>
-                <desc>ping (5MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>5</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040604">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-	<testCase id="040642">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7_test_10mhz.xml

@@ -1,103 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-10</htmlTabRef>
-	<htmlTabName>Test-10MHz</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 040101
- 030111 030112 040301 040511 040614 040652 040401 040201 030201 030202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="030111">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RRU (FDD/Band7)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="030112">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RCC (FDD/Band7/10MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RRU</desc>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040511">
-                <class>Ping</class>
-                <desc>ping (10MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>5</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040614">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - DL/32Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 32M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-	<testCase id="040652">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - UL/5Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 5M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>60</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7_test_20mhz.xml

@@ -1,103 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-20</htmlTabRef>
-	<htmlTabName>Test-20MHz</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 040101
- 030121 030122 040301 040521 040624 040662 040401 040201 030201 030202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="030121">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RRU (FDD/Band7)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="030122">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RCC (FDD/Band7/20MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>0</eNB_instance>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RRU</desc>
-		<eNB_instance>1</eNB_instance>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040521">
-                <class>Ping</class>
-                <desc>ping (20MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>5</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040624">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/50Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 50M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-	<testCase id="040662">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/10Mbps/UDP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-u -b 10M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/test_case_list_template.xml

@@ -107,28 +107,6 @@
 		<desc>Reboot UE</desc>
 	</testCase>
 
-	<!-- CAT-M UE class command references -->
-
-	<testCase id="040102">
-		<class>Initialize_CatM_module</class>
-		<desc>Initialize CAT-M Module</desc>
-	</testCase>
-
-	<testCase id="040202">
-		<class>Terminate_CatM_module</class>
-		<desc>Terminate CAT-M Module</desc>
-	</testCase>
-
-	<testCase id="040302">
-		<class>Attach_CatM_module</class>
-		<desc>Attach CAT-M Module</desc>
-	</testCase>
-
-	<testCase id="040402">
-		<class>Detach_CatM_module</class>
-		<desc>Detach CAT-M Module</desc>
-	</testCase>
-
 	<!-- EPC class command references -->
 
         <testCase id="050101">

cmake_targets/CMakeLists.txt

@@ -183,6 +183,7 @@ set(CMAKE_EXE_LINKER_FLAGS  "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${CMAKE_CU
 #########################
 # set a flag for changes in the source code
 # these changes are related to hardcoded path to include .h files
+add_definitions(-DCMAKER)
 set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
 set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
 
@@ -231,7 +232,7 @@ add_definitions("-DPACKAGE_BUGREPORT=\"openair4g-devel@lists.eurecom.fr\"")
 # Debug related options
 #########################################
 add_boolean_option(ASN_DEBUG           False "ASN1 coder/decoder Debug")
-add_boolean_option(ASN_EMIT_DEBUG      False "ASN1 coder/decoder Debug")
+add_boolean_option(EMIT_ASN_DEBUG      False "ASN1 coder/decoder Debug")
 add_boolean_option(MSG_PRINT           False "print debug messages")
 add_boolean_option(DISABLE_XER_PRINT   False "print XER Format")
 add_boolean_option(XER_PRINT           False "print XER Format")
@@ -259,17 +260,17 @@ add_boolean_option(ENABLE_ITTI True "ITTI is internal messaging, should remain e
 set (OCP_ITTI ${OPENAIR_DIR}/common/utils/ocp_itti)
 if (${ENABLE_ITTI})
   add_library(ITTI
+    # add .h files if depend on (this one is generated)
     ${OCP_ITTI}/intertask_interface.cpp
     ${OPENAIR_DIR}/common/utils/backtrace.c
     ${OPENAIR_DIR}/common/utils/memory_pools.c
     )
-add_dependencies(ITTI rrc_flag)
   set(ITTI_LIB ITTI)
   set(GTPU_need_ITTI ${OPENAIR3_DIR}/GTPV1-U/gtpv1u_eNB.c)
 endif (${ENABLE_ITTI})
 
 #############################
-# ASN.1 grammar C code generation & dependencies
+# ASN.1 grammar C code generation & dependancies
 ################################
 # A difficulty: asn1c generates C code of a un-predictable list of files
 # so, generate the c from asn1c once at cmake run time
@@ -277,6 +278,8 @@ endif (${ENABLE_ITTI})
 # (so creating new asn.1 objects instead of modifying the object attributes)
 # New C code source file, cmake must be re-run (instead of re-running make only)
 #############
+# set(asn1c_call "${OPENAIR_CMAKE}/tools/generate_asn1")
+# set(fix_asn1c_call "${OPENAIR_CMAKE}/tools/fix_asn1")
 set(asn1_generated_dir ${OPENAIR_BIN_DIR})
 
 set(protoc_call "${OPENAIR_CMAKE}/tools/generate_protobuf")
@@ -287,54 +290,59 @@ set(protobuf_generated_dir ${OPENAIR_BIN_DIR})
 add_list2_option(RRC_ASN1_VERSION "Rel14" "ASN.1 version of RRC interface" "Rel8" "Rel10" "Rel14" "CBA")
 
 if (${RRC_ASN1_VERSION} STREQUAL "Rel8")
-  make_version(LTE_RRC_VERSION 8 6 0)
+  make_version(RRC_VERSION 8 6 0)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-86.asn)
 elseif (${RRC_ASN1_VERSION} STREQUAL "CBA")
-  make_version(LTE_RRC_VERSION 10 2 0)
+  make_version(RRC_VERSION 10 2 0)
   add_definitions(-DCBA)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20-lola.asn)
 elseif (${RRC_ASN1_VERSION} STREQUAL "Rel10")
-  make_version(LTE_RRC_VERSION 10 2 0)
+  make_version(RRC_VERSION 10 2 0)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20.asn)
 elseif (${RRC_ASN1_VERSION} STREQUAL "Rel11")
-  make_version(LTE_RRC_VERSION 11 18 0)
+  make_version(RRC_VERSION 11 18 0)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-11.18.0.asn1)
 elseif (${RRC_ASN1_VERSION} STREQUAL "Rel12")
-  make_version(LTE_RRC_VERSION 12 16 0)
+  make_version(RRC_VERSION 12 16 0)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-12.16.0.asn1)
 elseif (${RRC_ASN1_VERSION} STREQUAL "Rel13")
-  make_version(LTE_RRC_VERSION 13 9 1)
+  make_version(RRC_VERSION 13 9 1)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-13.9.1.asn1)
 elseif (${RRC_ASN1_VERSION} STREQUAL "Rel14")
-  make_version(LTE_RRC_VERSION 14 7 0)
+  make_version(RRC_VERSION 14 7 0)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-14.7.0.asn1)
 elseif (${RRC_ASN1_VERSION} STREQUAL "Rel15")
-  make_version(LTE_RRC_VERSION 15 2 2)
+  make_version(RRC_VERSION 15 2 2)
   set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1c/ASN1_files/lte-rrc-15.2.2.asn1)
 endif  (${RRC_ASN1_VERSION} STREQUAL "Rel8")
-add_definitions(-DLTE_RRC_VERSION=${LTE_RRC_VERSION})
+add_definitions(-DRRC_VERSION=${RRC_VERSION})
 set (RRC_FULL_DIR ${asn1_generated_dir}/RRC_${RRC_ASN1_VERSION})
-
-# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
-execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${RRC_FULL_DIR}" "${RRC_GRAMMAR}" "LTE_"
+message("calling asn1c -pdu=all -fcompound-names -gen-PER -no-gen-OER -no-gen-example -D ${RRC_FULL_DIR} ${RRC_GRAMMAR}")
+execute_process(COMMAND mkdir -p ${RRC_FULL_DIR}
+                COMMAND env asn1c -pdu=all -fcompound-names -gen-PER -no-gen-OER -no-gen-example -D ${RRC_FULL_DIR} ${RRC_GRAMMAR}
                 RESULT_VARIABLE ret)
 if (NOT ${ret} STREQUAL 0)
   message(FATAL_ERROR "${ret}: error")
 endif (NOT ${ret} STREQUAL 0)
-file(GLOB rrc_source ${RRC_FULL_DIR}/*.c)
-add_custom_target (
-  rrc_flag ALL
-  ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${RRC_FULL_DIR}" "${RRC_GRAMMAR}" "LTE_"
-  DEPENDS ${RRC_GRAMMAR}
-  )
 
+file(GLOB rrc_source ${RRC_FULL_DIR}/*.c)
+file(GLOB rrc_h ${RRC_FULL_DIR}/*.h)
+set(rrc_h ${rrc_h} ${RRC_FULL_DIR}/asn_constant.h)
 set_source_files_properties(${rrc_source} PROPERTIES COMPILE_FLAGS -w) # suppress warnings from generated code
-add_library(RRC_LIB ${rrc_source}
+add_library(RRC_LIB ${rrc_h} ${rrc_source}
     ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1_msg.c
     ${OPENAIR2_DIR}/RRC/LTE/MESSAGES/asn1_msg_NB_IoT.c)
-add_dependencies(RRC_LIB rrc_flag)
 include_directories ("${RRC_FULL_DIR}")
 
+# add the command to generate the source code
+# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
+add_custom_command (
+  OUTPUT ${RRC_FULL_DIR}/asn_constant.h
+  COMMAND mkdir -p ${RRC_FULL_DIR}
+  COMMAND env asn1c -pdu=all -fcompound-names -gen-PER -no-gen-OER -no-gen-example -D ${RRC_FULL_DIR} ${RRC_GRAMMAR}
+  DEPENDS ${RRC_GRAMMAR}
+  )
+
 # S1AP
 # Same limitation as described in RRC: unknown generated file list
 # so we generate it at cmake time
@@ -370,26 +378,28 @@ endif(${S1AP_RELEASE} STREQUAL "R8")
 add_definitions(-DS1AP_VERSION=${S1AP_VERSION})
 set(S1AP_ASN_DIR ${S1AP_DIR}/MESSAGES/ASN1/${S1AP_RELEASE})
 set(S1AP_C_DIR ${asn1_generated_dir}/S1AP_${S1AP_RELEASE})
-
-# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
-execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${S1AP_C_DIR}" "${S1AP_ASN_DIR}/${S1AP_ASN_FILES}" "S1AP_" -fno-include-deps
+message("calling ASN1C_PREFIX=S1AP_ asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${S1AP_C_DIR} ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}")
+execute_process(COMMAND mkdir -p ${S1AP_C_DIR}
+                COMMAND env "ASN1C_PREFIX=S1AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${S1AP_C_DIR} ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}
                 RESULT_VARIABLE ret)
 if (NOT ${ret} STREQUAL 0)
   message(FATAL_ERROR "${ret}: error")
 endif (NOT ${ret} STREQUAL 0)
 file(GLOB S1AP_source ${S1AP_C_DIR}/*.c)
 
-add_custom_target (
-  s1ap_flag ALL
-  ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${S1AP_C_DIR}" "${S1AP_ASN_DIR}/${S1AP_ASN_FILES}" "S1AP_" -fno-include-deps
-  DEPENDS  "${S1AP_ASN_DIR}/${S1AP_ASN_FILES}" 
-)
+file(GLOB s1ap_h ${S1AP_C_DIR}/*.h)
+set(s1ap_h ${s1ap_h})
 
+add_custom_command (
+  OUTPUT ${S1AP_C_DIR}/S1AP_asn_constant.h
+  COMMAND mkdir -p ${S1AP_C_DIR}
+  COMMAND env "ASN1C_PREFIX=S1AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${S1AP_C_DIR} ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}
+  DEPENDS ${S1AP_ASN_DIR}/${S1AP_ASN_FILES}
+)
 add_library(S1AP_LIB
   ${S1AP_source}
   ${S1AP_DIR}/s1ap_common.c
   )
-add_dependencies(S1AP_LIB rrc_flag s1ap_flag)
 
 include_directories ("${S1AP_C_DIR}")
 include_directories ("${S1AP_DIR}")
@@ -408,7 +418,6 @@ add_library(S1AP_ENB
   ${S1AP_DIR}/s1ap_eNB_trace.c
   ${S1AP_DIR}/s1ap_eNB_ue_context.c
   )
-add_dependencies(S1AP_ENB rrc_flag s1ap_flag)
 
 #X2AP
 # Same limitation as described in RRC/S1AP: unknown generated file list
@@ -436,19 +445,22 @@ endif(${X2AP_RELEASE} STREQUAL "R8")
 add_definitions(-DX2AP_VERSION=${X2AP_VERSION})
 set(X2AP_ASN_DIR ${X2AP_DIR}/MESSAGES/ASN1/${X2AP_RELEASE})
 set(X2AP_C_DIR ${asn1_generated_dir}/X2AP_${X2AP_RELEASE})
-
-# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
-execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${X2AP_C_DIR}" "${X2AP_ASN_DIR}/${X2AP_ASN_FILES}"  "X2AP_" -fno-include-deps
+message("calling ASN1C_PREFIX=X2AP_ asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${X2AP_C_DIR} ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}")
+execute_process(COMMAND mkdir -p ${X2AP_C_DIR}
+                COMMAND env "ASN1C_PREFIX=X2AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${X2AP_C_DIR} ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}
                 RESULT_VARIABLE ret)
 if (NOT ${ret} STREQUAL 0)
   message(FATAL_ERROR "${ret}: error")
 endif (NOT ${ret} STREQUAL 0)
-
 file(GLOB X2AP_source ${X2AP_C_DIR}/*.c)
 
-add_custom_target (
-  x2_flag ALL
-  COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${X2AP_C_DIR}" "${X2AP_ASN_DIR}/${X2AP_ASN_FILES}"  "X2AP_" -fno-include-deps
+file(GLOB x2ap_h ${X2AP_C_DIR}/*.h)
+set(x2ap_h ${x2ap_h})
+
+add_custom_command (
+  OUTPUT ${X2AP_C_DIR}/X2AP_asn_constant.h
+  COMMAND mkdir -p ${X2AP_C_DIR}
+  COMMAND env "ASN1C_PREFIX=X2AP_" asn1c -pdu=all -fcompound-names -fno-include-deps -gen-PER -no-gen-OER -no-gen-example -D ${X2AP_C_DIR} ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}
   DEPENDS ${X2AP_ASN_DIR}/${X2AP_ASN_FILES}
   )
 
@@ -456,7 +468,6 @@ add_library(X2AP_LIB
   ${X2AP_source}
   ${X2AP_DIR}/x2ap_common.c
   )
-add_dependencies(X2AP_LIB rrc_flag x2_flag)
 
 include_directories ("${X2AP_C_DIR}")
 include_directories ("${X2AP_DIR}")
@@ -470,7 +481,6 @@ add_library(X2AP_ENB
   ${X2AP_DIR}/x2ap_eNB_management_procedures.c
   ${X2AP_DIR}/x2ap_eNB_generate_messages.c
  )
-add_dependencies(X2AP_ENB rrc_flag x2_flag)
 
 # Hardware dependant options
 ###################################
@@ -541,15 +551,6 @@ set(TPLIB_ETHERNET_SOURCE
   )
 add_library(oai_eth_transpro MODULE ${TPLIB_ETHERNET_SOURCE} )
 
-include_directories("${OPENAIR_TARGETS}/ARCH/IRIS/USERSPACE/LIB/")
-set(option_HWIRISLIB_lib "-l SoapySDR")
-set(HWLIB_IRIS_SOURCE
-        ${OPENAIR_TARGETS}/ARCH/IRIS/USERSPACE/LIB/iris_lib.cpp
-        )
-add_library(oai_irisdevif MODULE ${HWLIB_IRIS_SOURCE})
-target_include_directories(oai_irisdevif PRIVATE /usr/local/lib/SoapySDR/modules0.7/)
-target_link_libraries(oai_irisdevif SoapySDR)
-
 include_directories("${OPENAIR_TARGETS}/ARCH/mobipass/")
 set(TPLIB_MOBIPASS_SOURCE
   ${OPENAIR_TARGETS}/ARCH/mobipass/interface.c
@@ -615,7 +616,6 @@ add_boolean_option(MESSAGE_CHART_GENERATOR_PHY     False "trace some PHY exchang
 add_boolean_option(UE_EXPANSION             False         "enable UE_EXPANSION with max 256 UE")
 add_boolean_option(PHY_TX_THREAD            False         "enable UE_EXPANSION with max 256 UE")
 add_boolean_option(PRE_SCD_THREAD           False         "enable UE_EXPANSION with max 256 UE")
-add_boolean_option(UESIM_EXPANSION          False         "enable UESIM_EXPANSION with max 256 UE")
 
 ########################
 # Include order
@@ -630,6 +630,7 @@ add_boolean_option(ENABLE_VCD              True  "always true now, time measurem
 add_boolean_option(ENABLE_VCD_FIFO         True  "time measurements of proc calls and var displays sent to FIFO (one more thread)")
 add_boolean_option(LINUX                   False "used in weird memcpy() in pdcp.c ???")
 add_boolean_option(LINUX_LIST              False "used only in lists.c: either use OAI implementation of lists or Linux one (should be True, but it is False")
+add_boolean_option(LOG_NO_THREAD           True  "Disable thread for log, seems always set to true")
 add_boolean_option(OPENAIR_LTE             True "Seems legacy: keep it to true")
 
 ##########################
@@ -872,7 +873,6 @@ add_library(FLEXRAN_AGENT
   ${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC/flexran_agent_mac_internal.c
   ${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC/flexran_agent_mac_slice_verification.c
   )
-add_dependencies(FLEXRAN_AGENT rrc_flag)
 set(FLEXRAN_AGENT_LIB FLEXRAN_AGENT)
 #include_directories(${OPENAIR2_DIR}/ENB_APP)
 
@@ -938,7 +938,6 @@ set(UTIL_SRC
 #  ${OPENAIR2_DIR}/UTIL/OTG/otg_rx.c
   )
 add_library(UTIL ${UTIL_SRC})
-add_dependencies(UTIL rrc_flag)
 
 #set(OMG_SUMO_SRC
 #  ${OPENAIR2_DIR}/UTIL/OMG/client_traci_OMG.c
@@ -978,14 +977,12 @@ set(SCHED_SRC
   ${OPENAIR1_DIR}/SCHED/phy_procedures_lte_common.c
 )
 add_library(SCHED_LIB ${SCHED_SRC})
-add_dependencies(SCHED_LIB rrc_flag)
 
 set(SCHED_SRC_RU
   ${OPENAIR1_DIR}/SCHED/ru_procedures.c
   ${OPENAIR1_DIR}/SCHED/prach_procedures.c
 )
 add_library(SCHED_RU_LIB ${SCHED_SRC_RU})
-add_dependencies(SCHED_RU_LIB rrc_flag)
 
 set(SCHED_SRC_UE
   ${OPENAIR1_DIR}/SCHED_UE/phy_procedures_lte_ue.c
@@ -993,11 +990,8 @@ set(SCHED_SRC_UE
   ${OPENAIR1_DIR}/SCHED_UE/pucch_pc.c
   ${OPENAIR1_DIR}/SCHED_UE/pusch_pc.c
   ${OPENAIR1_DIR}/SCHED_UE/srs_pc.c
-  ${OPENAIR1_DIR}/SCHED/fapi_l1.c
-  ${OPENAIR1_DIR}/SCHED/dummy_functions_ue.c
 )
 add_library(SCHED_UE_LIB ${SCHED_SRC_UE})
-add_dependencies(SCHED_UE_LIB rrc_flag)
 
 # nFAPI
 #################################
@@ -1048,18 +1042,7 @@ set(NFAPI_USER_SRC
   ${NFAPI_USER_DIR}/nfapi_pnf.c
   ${NFAPI_USER_DIR}/nfapi_vnf.c
 )
-
 add_library(NFAPI_USER_LIB ${NFAPI_USER_SRC})
-add_dependencies(NFAPI_USER_LIB rrc_flag)
-
-set(NFAPI_USER_UE_SRC
-  ${NFAPI_USER_DIR}/nfapi.c
-  ${NFAPI_USER_DIR}/nfapi_pnf.c
-)
-
-add_library(NFAPI_USER_UE_LIB ${NFAPI_USER_UE_SRC})
-add_dependencies(NFAPI_USER_UE_LIB rrc_flag)
-
 include_directories(${NFAPI_USER_DIR})
 
 # Layer 1
@@ -1078,19 +1061,16 @@ set(PHY_TURBOIF
 
 add_library(coding MODULE ${PHY_TURBOSRC} )
 set(PHY_SRC_COMMON
+  # depend on code generation from asn1c
+  ${RRC_FULL_DIR}/asn_constant.h
+  # actual source
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools_common.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/group_hopping.c
-  
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pbch.c                #Source files that had to be added after merge with sidelink
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_modulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_coding.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich.c
-  
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/srs_modulation.c
+#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slss.c
+#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sldch.c
+#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slsch.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/group_hopping.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/phich_common.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich_common.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
@@ -1099,12 +1079,9 @@ set(PHY_SRC_COMMON
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch_common.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_scrambling.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_gold_generic.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/srs_modulation.c
   ${OPENAIR1_DIR}/PHY/MODULATION/ofdm_mod.c
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_sync_time.c
-  
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c #Source files that had to be added after merge with sidelink
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
-  
   ${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_cell_spec.c
   ${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_uespec.c
   ${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_gold.c
@@ -1137,6 +1114,7 @@ set(PHY_SRC_COMMON
   )
 
 set(PHY_SRC
+  # actual source
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pss.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss_gen.c
@@ -1158,14 +1136,17 @@ set(PHY_SRC
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/uci_tools.c
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
+#  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_eNB_measurements.c
   ${OPENAIR1_DIR}/PHY/INIT/lte_init.c
   )
 
 set(PHY_SRC_RU
+  # actual source
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if4_tools.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if5_tools.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/drs_modulation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_ul.c
   ${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz.c
   ${OPENAIR1_DIR}/PHY/MODULATION/gen_75KHz.cpp
@@ -1177,6 +1158,7 @@ set(PHY_SRC_RU
   )
 
 set(PHY_SRC_UE
+  # actual source
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/sss_ue.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sss_gen.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
@@ -1193,9 +1175,6 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/prach_ue.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pmch_ue.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/pch_ue.c
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slpss.c  #Transfer sidelink source files to LTE_TRANSPORT_UE
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slsss.c
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slbch.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slss.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/sldch.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/slsch.c
@@ -1204,7 +1183,6 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/ulsch_coding.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/rar_tools_ue.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/initial_sync.c
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/initial_syncSL.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_mbsfn.c
   ${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz_ue.c
@@ -1218,7 +1196,6 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/adjust_gain.c
   ${OPENAIR1_DIR}/PHY/INIT/lte_init_ue.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
   )
 
 if (${SMBV})
@@ -1230,13 +1207,9 @@ if (${COMPILATION_AVX2} STREQUAL "True")
 endif ()
 
 add_library(PHY_COMMON ${PHY_SRC_COMMON})
-add_dependencies(PHY_COMMON rrc_flag)
 add_library(PHY ${PHY_SRC})
-add_dependencies(PHY rrc_flag)
 add_library(PHY_UE ${PHY_SRC_UE})
-add_dependencies(PHY_UE rrc_flag)
 add_library(PHY_RU ${PHY_SRC_RU})
-add_dependencies(PHY_RU rrc_flag)
 
 #Library for mex functions
 #########################3
@@ -1387,8 +1360,6 @@ set (MAC_SRC
 
 set (MAC_SRC_UE
   ${PHY_INTERFACE_DIR}/phy_stub_UE.c
-  ${PHY_INTERFACE_DIR}/IF_Module.c
-  ${PHY_INTERFACE_DIR}/dummy_functions.c
   ${MAC_DIR}/main_ue.c
   ${MAC_DIR}/ue_procedures.c
   ${MAC_DIR}/ra_procedures.c
@@ -1400,23 +1371,19 @@ set (MAC_SRC_UE
 set (ENB_APP_SRC
   ${OPENAIR2_DIR}/ENB_APP/enb_app.c
   ${OPENAIR2_DIR}/ENB_APP/enb_config.c
-  ${OPENAIR2_DIR}/ENB_APP/enb_config_SL.c
-  ${OPENAIR2_DIR}/ENB_APP/enb_config_eMTC.c
   ${OPENAIR2_DIR}/ENB_APP/RRC_config_tools.c
   )
-  
+
 add_library(L2
   ${L2_SRC}
   ${MAC_SRC}
   ${ENB_APP_SRC})
 #  ${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
-add_dependencies(L2 rrc_flag s1ap_flag x2_flag)
 
 add_library(L2_UE
   ${L2_SRC_UE}
   ${MAC_SRC_UE}
 )
-add_dependencies(L2_UE rrc_flag s1ap_flag x2_flag)
 
 include_directories(${NFAPI_USER_DIR})
 
@@ -1442,7 +1409,6 @@ set (GTPV1U_SRC
   ${GTPV1U_DIR}/gtpv1u_teid_pool.c
 )
 add_library(GTPV1U ${GTPV1U_SRC})
-add_dependencies(GTPV1U rrc_flag)
 
 set(SCTP_SRC
   ${OPENAIR3_DIR}/SCTP/sctp_common.c
@@ -1450,10 +1416,8 @@ set(SCTP_SRC
   ${OPENAIR3_DIR}/SCTP/sctp_eNB_itti_messaging.c
 )
 add_library(SCTP_CLIENT ${SCTP_SRC})
-add_dependencies(SCTP_CLIENT rrc_flag)
 
 add_library(UDP ${OPENAIR3_DIR}/UDP/udp_eNB_task.c)
-add_dependencies(UDP rrc_flag)
 
 
 set(NAS_SRC ${OPENAIR3_DIR}/NAS/)
@@ -1520,8 +1484,6 @@ set(libnas_esm_msg_OBJS
   ${NAS_SRC}COMMON/ESM/MSG/PdnConnectivityRequest.c
   ${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectReject.c
   ${NAS_SRC}COMMON/ESM/MSG/PdnDisconnectRequest.c
-  ${NAS_SRC}COMMON/ESM/MSG/RemoteUEReport.c
-  ${NAS_SRC}COMMON/ESM/MSG/RemoteUEReportResponse.c
 )
 
 set(libnas_ies_OBJS
@@ -1603,9 +1565,6 @@ set(libnas_ies_OBJS
   ${NAS_SRC}COMMON/IES/UeRadioCapabilityInformationUpdateNeeded.c
   ${NAS_SRC}COMMON/IES/UeSecurityCapability.c
   ${NAS_SRC}COMMON/IES/VoiceDomainPreferenceAndUeUsageSetting.c
-  ${NAS_SRC}COMMON/IES/RemoteUserID.c
-  ${NAS_SRC}COMMON/IES/RemoteUEContext.c
-  ${NAS_SRC}COMMON/IES/PKMFAddress.c
 )
 
 set (libnas_utils_OBJS
@@ -1684,7 +1643,6 @@ if(NAS_UE)
     ${NAS_SRC}UE/ESM/EsmStatusHdl.c
     ${NAS_SRC}UE/ESM/PdnConnectivity.c
     ${NAS_SRC}UE/ESM/PdnDisconnect.c
-    ${NAS_SRC}UE/ESM/RemoteUeReport.c
   )
   set(libnas_ue_esm_sap_OBJS
     ${NAS_SRC}UE/ESM/SAP/esm_recv.c
@@ -1708,7 +1666,6 @@ if(NAS_UE)
     ${libnas_ue_esm_OBJS}
     ${libnas_ue_esm_sap_OBJS}
   )
-  add_dependencies(LIB_NAS_UE rrc_flag)
   set(NAS_UE_LIB LIB_NAS_UE)
 
   include_directories(${NAS_SRC}UE)
@@ -1791,13 +1748,14 @@ add_library(SIMU_ETH
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
-#${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c
+${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c
 #${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/emu_transport.c
 )
 
 add_library(OPENAIR0_LIB
   ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
 )
+
 include_directories("${NFAPI_DIR}/nfapi/public_inc")
 include_directories("${NFAPI_DIR}/common/public_inc")
 include_directories("${NFAPI_DIR}/pnf/public_inc")
@@ -1805,6 +1763,7 @@ include_directories("${NFAPI_DIR}/nfapi/inc")
 include_directories("${NFAPI_DIR}/sim_common/inc")
 include_directories("${NFAPI_DIR}/pnf_sim/inc")
 
+
 # System packages that are required
 # We use either the cmake buildin, in ubuntu are in: /usr/share/cmake*/Modules/
 # or cmake provide a generic interface to pkg-config that widely used
@@ -1830,15 +1789,6 @@ include_directories(${CRYPTO_INCLUDE_DIRS})
 if (${RF_BOARD} STREQUAL "OAI_USRP")
   find_package(Boost REQUIRED)
   include_directories(${LIBBOOST_INCLUDE_DIR})
-
-elseif (${RF_BOARD} STREQUAL "OAI_IRIS")
-    include_directories("${OPENAIR_TARGETS}/ARCH/IRIS/USERSPACE/LIB/")
-    include_directories("/usr/local/include/")
-    set(HW_SOURCE ${HW_SOURCE}
-            ${OPENAIR_TARGETS}/ARCH/IRIS/USERSPACE/LIB/iris_lib.cpp)
-    LINK_DIRECTORIES("/usr/local/lib")
-    set(option_HW_lib "-lSoapySDR -rdynamic -ldl")
-
 endif (${RF_BOARD} STREQUAL "OAI_USRP")
 
 pkg_search_module(OPENPGM openpgm-5.1 openpgm-5.2)
@@ -1869,26 +1819,6 @@ endif()
 add_definitions("-DNETTLE_VERSION_MAJOR=${NETTLE_VERSION_MAJOR}")
 add_definitions("-DNETTLE_VERSION_MINOR=${NETTLE_VERSION_MINOR}")
 
-#pkg_search_module(NFAPI nfapi)
-#if(NOT ${NFAPI_FOUND})
-  #message( FATAL_ERROR "PACKAGE nfapi not found: some targets will fail. Run build_oai -I again!")
-#else()
-  #include_directories(${NFAPI_INCLUDE_DIRS})
-  #message( "PACKAGE nfapi!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
-  #message( "${NFAPI_INCLUDE_DIR}")
-  #message( "${NFAPI_COMMON_INCLUDE_DIR}")
-  #message( "${NFAPI_VNF_INCLUDE_DIR}")
-  #message( "${NFAPI_PNF_INCLUDE_DIR}")
-  #message( "XXX")
-  #message( "${NFAPI_LIBRARY}")
-  #message( "${NFAPI_COMMON_LIBRARY}")
-  #message( "${NFAPI_PNF_LIBRARY}")
-  #message( "XXX")
-  #message( "${NFAPI_LIBRARIES}")
-  #message( "XXX")
-#endif()
-
-
 pkg_search_module(XPM xpm)
 if(NOT ${XPM_FOUND})
   message("PACKAGE xpm not found: some targets will fail")
@@ -1958,12 +1888,6 @@ if (${T_TRACER})
   set (T_LIB "rt")
 endif (${T_TRACER})
 
-#if (${NFAPI_DIR})
-#set (NFAPI_PNF_LIB "nfapi_pnf")
-#set (NFAPI_LIB "nfapi")
-#set (NFAPI_COMMON_LIB "nfapi_common")
-#endif (${NFAPI_DIR})
-#
 #Some files in the T directory are generated.
 #This rule and the following deal with it.
 add_custom_command (
@@ -1999,11 +1923,13 @@ add_definitions(-DASN1_MINIMUM_VERSION=924)
 ###################################################
 
 add_executable(lte-softmodem
+  ${rrc_h}
+  ${s1ap_h}
   ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
   ${OPENAIR_TARGETS}/RT/USER/lte-enb.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
+  ${OPENAIR_TARGETS}/RT/USER/ru_control.c
   ${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
   ${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
   ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
   ${OPENAIR_TARGETS}/COMMON/create_tasks.c
@@ -2021,11 +1947,10 @@ add_executable(lte-softmodem
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
   )
-add_dependencies(lte-softmodem rrc_flag s1ap_flag x2_flag)
 
 target_link_libraries (lte-softmodem
   -Wl,--start-group
-  RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU SIMU_ETH LFDS L2
+  RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU LFDS L2
   ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} ${FLEXRAN_AGENT_LIB} LFDS7
   NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
   -Wl,--end-group z dl)
@@ -2035,16 +1960,16 @@ target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CR
 target_link_libraries (lte-softmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-softmodem ${T_LIB})
 
-
-
 # lte-softmodem-nos1 is both eNB and UE implementation
 ###################################################
 add_executable(lte-softmodem-nos1
+  ${rrc_h}
+  ${s1ap_h}
   ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
   ${OPENAIR_TARGETS}/RT/USER/lte-enb.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
+  ${OPENAIR_TARGETS}/RT/USER/ru_control.c
   ${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
   ${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
   ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
   ${OPENAIR_TARGETS}/COMMON/create_tasks.c
@@ -2061,7 +1986,6 @@ add_executable(lte-softmodem-nos1
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
   )
-add_dependencies(lte-softmodem-nos1 rrc_flag s1ap_flag x2_flag)
 target_link_libraries (lte-softmodem-nos1
   -Wl,--start-group
   RRC_LIB SECU_CN SECU_OSA UTIL HASHTABLE SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU LFDS L2  ${RAL_LIB} ${ITTI_LIB}
@@ -2074,16 +1998,17 @@ target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt
 target_link_libraries (lte-softmodem-nos1  ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-softmodem-nos1 ${T_LIB})
 
-
 # lte-uesoftmodem is  UE implementation
 #######################################
 
 add_executable(lte-uesoftmodem
+  ${rrc_h}
+  ${s1ap_h}
   ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ue.c
   ${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
+  ${OPENAIR_TARGETS}/RT/USER/ru_control.c
   ${OPENAIR_TARGETS}/RT/USER/rfsim.c
   ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
   ${OPENAIR_TARGETS}/COMMON/create_tasks_ue.c
@@ -2094,7 +2019,6 @@ add_executable(lte-uesoftmodem
   ${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
   ${OPENAIR_DIR}/common/utils/utils.c
   ${OPENAIR_DIR}/common/utils/system.c
-  #${OPENAIR_TARGETS}/SIMU/USER/channel_sim.c
   ${XFORMS_SOURCE}
   ${XFORMS_SOURCE_SOFTMODEM}
   ${T_SOURCE}
@@ -2102,27 +2026,28 @@ add_executable(lte-uesoftmodem
   ${SHLIB_LOADER_SOURCES}
   )
 
-add_dependencies(lte-uesoftmodem rrc_flag s1ap_flag x2_flag)
 target_link_libraries (lte-uesoftmodem
   -Wl,--start-group
-  RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU SIMU_ETH
+  RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU
   ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} LFDS7 ${ATLAS_LIBRARIES}
-  NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_UE_LIB
+  NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
   -Wl,--end-group z dl)
 
 target_link_libraries (lte-uesoftmodem ${LIBXML2_LIBRARIES})
-target_link_libraries (lte-uesoftmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${LAPACK_LIBRARIES} ${ATLAS_LIBRARIES})
+target_link_libraries (lte-uesoftmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
 target_link_libraries (lte-uesoftmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-uesoftmodem ${T_LIB})
 
 # lte-uesoftmodem-nos1 is UE implementation
 ###################################################
 add_executable(lte-uesoftmodem-nos1
+  ${rrc_h}
+  ${s1ap_h}
   ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ue.c
   ${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
+  ${OPENAIR_TARGETS}/RT/USER/ru_control.c
   ${OPENAIR_TARGETS}/RT/USER/rfsim.c
   ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
   ${OPENAIR_TARGETS}/COMMON/create_tasks_ue.c
@@ -2141,10 +2066,9 @@ add_executable(lte-uesoftmodem-nos1
   ${SHLIB_LOADER_SOURCES}
   )
 
-add_dependencies(lte-uesoftmodem-nos1 rrc_flag s1ap_flag x2_flag)
 target_link_libraries (lte-uesoftmodem-nos1
   -Wl,--start-group
-  RRC_LIB SECU_CN SECU_OSA UTIL HASHTABLE SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE ${MSC_LIB} SIMU ${RAL_LIB} ${ITTI_LIB}
+  RRC_LIB SECU_CN SECU_OSA UTIL HASHTABLE SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU ${RAL_LIB} ${ITTI_LIB}
   ${MIH_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} LFDS7 ${ATLAS_LIBRARIES}
   NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
   -Wl,--end-group z dl )
@@ -2154,8 +2078,6 @@ target_link_libraries (lte-uesoftmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt cry
 target_link_libraries (lte-uesoftmodem-nos1  ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-uesoftmodem-nos1 ${T_LIB})
 
-
-
 # USIM process
 #################
 #add_executable(usim
@@ -2183,6 +2105,7 @@ target_link_libraries (lte-uesoftmodem-nos1 ${T_LIB})
 # Addexecutables for tests
 ####################################
 
+
 # Unitary tests for each piece of L1: example, mbmssim is MBMS L1 simulator
 #####################################
 
@@ -2197,21 +2120,19 @@ target_link_libraries (dlsim_tm4
   pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${T_LIB}
   )
 
-#foreach(myExe dlsim dlsim_tm7 ulsim slschsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
-foreach(myExe dlsim ulsim slschsim pucchsim prachsim)
+foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
+
   add_executable(${myExe}
     ${OPENAIR1_DIR}/SIMULATION/LTE_PHY/${myExe}.c
-    ${OPENAIR1_DIR}/SIMULATION/LTE_PHY/dummy_functions.c
-    #${OPENAIR_TARGETS}/SIMU/USER/channel_sim.c
     ${XFORMS_SOURCE}
     ${T_SOURCE}
     ${CONFIG_SOURCES}
     ${SHLIB_LOADER_SOURCES}
     )
-
   target_link_libraries (${myExe}
--Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY PHY_UE PHY_RU LFDS SIMU SIMU_ETH ${ITTI_LIB} LFDS7 -Wl,--end-group
-    pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${T_LIB} dl
+
+    -Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY PHY_UE PHY_RU LFDS ${ITTI_LIB} LFDS7 -Wl,--end-group
+    pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${T_LIB} dl 
     )
 endforeach(myExe)
 
@@ -2221,6 +2142,7 @@ add_executable(test_epc_generate_scenario
   ${OPENAIR2_DIR}/ENB_APP/enb_config.h
   ${OPENAIR2_DIR}/COMMON/commonDef.h
   ${OPENAIR2_DIR}/COMMON/messages_def.h
+  ${OPENAIR2_DIR}/COMMON/messages_types.h
   ${OPENAIR3_DIR}/S1AP/s1ap_eNB_defs.h
   )
 target_link_libraries (test_epc_generate_scenario
@@ -2240,6 +2162,7 @@ add_executable(test_epc_play_scenario
   ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.h
   ${OPENAIR2_DIR}/COMMON/commonDef.h
   ${OPENAIR2_DIR}/COMMON/messages_def.h
+  ${OPENAIR2_DIR}/COMMON/messages_types.h
   )
 target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
 target_link_libraries (test_epc_play_scenario

cmake_targets/at_commands/CMakeLists.txt

@@ -76,6 +76,7 @@ macro(add_boolean_option name val helpstr)
 endmacro(add_boolean_option)
 
 # compilation flags
+# added CMAKER conditional compilation to not bother legacy building system
 #############################################
 if(NOT CMAKE_BUILD_TYPE)
 set(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel." FORCE)
@@ -83,7 +84,7 @@ endif()
 set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS Debug Release RelWithDebInfo MinSizeRel)
 
 #
-set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -msse4.2 -std=gnu99 -Wall -Wstrict-prototypes -fno-strict-aliasing -rdynamic -funroll-loops -Wno-packed-bitfield-compat ")
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -msse4.2 -std=gnu99 -Wall -Wstrict-prototypes -fno-strict-aliasing -rdynamic -funroll-loops -Wno-packed-bitfield-compat -DCMAKER")
 set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -ggdb -DMALLOC_CHECK_=3")
 set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} -ggdb -DMALLOC_CHECK_=3 -O2")
 
@@ -436,7 +437,6 @@ set(esm_SRC
     ${OPENAIR_NAS_DIR}/UE/ESM/EsmStatusHdl.c
     ${OPENAIR_NAS_DIR}/UE/ESM/PdnConnectivity.c
     ${OPENAIR_NAS_DIR}/UE/ESM/PdnDisconnect.c
-    ${OPENAIR_NAS_DIR}/UE/ESM/RemoteUeReport.c
     
     ${OPENAIR_NAS_DIR}/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.c
     ${OPENAIR_NAS_DIR}/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.c
@@ -470,7 +470,6 @@ set(esm_SRC
 set(esm_HDR
     ${OPENAIR_TARGETS}/COMMON/openairinterface5g_limits.h
     ${OPENAIR_NAS_DIR}/UE/ESM/esm_main.h
-    ${OPENAIR_NAS_DIR}/UE/ESM/PdnConnectivity.h
     ${OPENAIR_NAS_DIR}/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.h
     ${OPENAIR_NAS_DIR}/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.h
     ${OPENAIR_NAS_DIR}/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextRequest.h

cmake_targets/autotests/test_case_list.xml

@@ -956,20 +956,20 @@
       <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
       <pre_exec_args></pre_exec_args>
       <main_exec> $OPENAIR_DIR/targets/bin/dlsim.Rel14</main_exec>
-      <main_exec_args> -m=5 -g=F -s=-1= -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -O=60
-                        -m=4 -g=F -s=0 -w=1.0 -f=.2 -n=500 -B=6 -c=4 -z=2 -O=60
-                        -m=15 -g=F -s=6.7 -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -O=60
-                        -m=15 -g=F -s=6.7 -w=1.0 -f=.2 -n=500 -B=25 -c=2 -z=2 -O=60
-                        -m=15 -g=G -s=1.4 -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -O=25
-                        -m=15 -g=G -s=1.4 -w=1.0 -f=.2 -n=500 -B=25 -c=2 -z=2 -O=25
-                        -m=25 -g=F -s=17.4 -w=1.0 -f=.2 -n=500 -B=25 -c=3 -z=2 -O=60
-                        -m=25 -g=F -s=17.5 -w=1.0 -f=.2 -n=500 -B=25 -c=3 -z=2 -r=1022 -O=60
-                        -m=26 -g=F -s=17.7 -w=1.0 -f=.2 -n=500 -B=50 -c=2 -z=2 -O=60
-                        -m=26 -g=F -s=17.6 -w=1.0 -f=.2 -n=500 -B=100 -c=2 -z=2 -O=60
-                        -m=26 -g=F -s=17.3 -w=1.0 -f=.2 -n=500 -B=100 -c=2 -z=2 -r=1600 -O=60
-                        -m=26 -g=F -s=16.6 -w=1.0 -f=.2 -n=500 -B=100 -c=2 -z=2 -r=1899 -O=60
-                        -m=14 -g=F -s=6.8  -w=1.0 -f=.2 -n=500 -B=50 -c=2 -x=2 -y=2 -z=2 -O=60
-                        -m=13 -g=F -s=5.9  -w=1.0 -f=.2 -n=500 -B=25 -c=3 -x=2 -y=2 -z=2 -O=60</main_exec_args>
+      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
+                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O60
+                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
+                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c2 -z2 -O60
+                       -m15 -gG -s1.4 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O25
+                       -m15 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c2 -z2 -O25
+                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O60
+                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O60
+                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O60
+                       -m26 -gF -s17.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -O60
+                       -m26 -gF -s17.3 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1600 -O60
+                       -m26 -gF -s16.6 -w1.0 -f.2 -n500 -B100 -c2 -z2 -r1899 -O60
+		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O60
+                       -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O60</main_exec_args>
       <tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b</tags>
       <search_expr_true>"passed"</search_expr_true>
       <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>

cmake_targets/build_oai

@@ -43,7 +43,6 @@ conf_nvram_path=$OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf
 MSC_GEN=0
 XFORMS="True"
 UE_EXPANSION="False"
-UESIM_EXPANSION="False"
 PRINT_STATS="False"
 VCD_TIMING="False"
 DEADLINE_SCHEDULER_FLAG_USER="False"
@@ -108,7 +107,7 @@ Options
    Rel8 limits the implementation to 3GPP Release 8 version
    Rel10 limits the implementation to 3GPP Release 10 version
 -w | --hardware
-   EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, IRIS, None (Default)
+   EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, None (Default)
    Adds this RF board support (in external packages installation and in compilation)
 -t | --transport protocol
    ETHERNET , None
@@ -219,10 +218,6 @@ function main() {
             UE_EXPANSION="True"
             echo_info "Will compile with UE_EXPANSION"
             shift;;
-       --musim)
-            UESIM_EXPANSION="True"
-            echo_info "Will compile with UESIM_EXPANSION"
-            shift;;
        --UE-conf-nvram)
             conf_nvram_path=$(readlink -f $2)
             shift 2;;
@@ -236,7 +231,7 @@ function main() {
        -w | --hardware)
             HW="$2" #"${i#*=}"
             # Use OAI_USRP  as the key word USRP is used inside UHD driver           
-            if [ "$HW" != "BLADERF" -a  "$HW" != "USRP" -a "$HW" != "LMSSDR" -a  "$HW" != "None" -a  "$HW" != "EXMIMO" -a  "$HW" != "IRIS"  ] ; then 
+	    if [ "$HW" != "BLADERF" -a  "$HW" != "USRP" -a "$HW" != "LMSSDR" -a  "$HW" != "None" -a  "$HW" != "EXMIMO"  ] ; then 
 		echo_fatal "Unknown HW type $HW will exit..."		
 	    else
 		if [ "$HW" == "USRP" ] ; then 
@@ -248,9 +243,6 @@ function main() {
 		if [ "$HW" == "LMSSDR" ] ; then 
 		    HW="OAI_LMSSDR"
 		fi 
-                if [ "$HW" == "IRIS" ] ; then
-                    HW="OAI_IRIS"
-                fi
 		echo_info "Setting hardware to: $HW"
 	    fi
             shift 2;;
@@ -422,9 +414,7 @@ function main() {
         DEADLINE_SCHEDULER_FLAG_USER="False"
      elif [ "$HW" = "OAI_BLADERF" ] ; then 
         DEADLINE_SCHEDULER_FLAG_USER="False"
-     elif [ "$HW" = "OAI_LMSSDR" ] ; then     
-        DEADLINE_SCHEDULER_FLAG_USER="False" 
-     elif [ "$HW" = "OAI_IRIS" ] ; then
+     elif [ "$HW" = "OAI_LMSSDR" ] ; then 
         DEADLINE_SCHEDULER_FLAG_USER="False"
      elif [ "$HW" = "None" ] ; then 
         DEADLINE_SCHEDULER_FLAG_USER="False"
@@ -494,13 +484,6 @@ function main() {
         flash_firmware_bladerf
       fi
     fi
-    if [ "$HW" == "OAI_IRIS" ] ; then
-      echo_info "installing packages for IRIS support"
-      check_install_soapy
-      #if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
-      #  flash_firmware_iris
-      #fi
-    fi
     echo_info "installing protobuf/protobuf-c for flexran agent support"
     install_protobuf_from_source
     install_protobuf_c_from_source
@@ -556,7 +539,6 @@ function main() {
     echo "set ( UE_EXPANSION $UE_EXPANSION )"      >>  $cmake_file
 #    echo "set ( PHY_TX_THREAD $UE_EXPANSION )"     >>  $cmake_file
     echo "set ( PRE_SCD_THREAD $UE_EXPANSION )"    >>  $cmake_file
-    echo "set ( UESIM_EXPANSION $UESIM_EXPANSION )"      >>  $cmake_file
     echo "set ( RRC_ASN1_VERSION \"${REL}\")"      >>  $cmake_file
     echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"     >>  $cmake_file
     echo "set ( RF_BOARD \"${HW}\")"               >>  $cmake_file
@@ -658,8 +640,9 @@ function main() {
   if [ "$SIMUS_PHY" = "1" ] ; then
     # lte unitary simulators compilation
     echo_info "Compiling unitary tests simulators"
-#    simlist="dlsim_tm4 dlsim ulsim slschsim pucchsim prachsim pdcchsim pbchsim mbmssim"
-    simlist="dlsim ulsim slschsim pucchsim prachsim"
+    # TODO: fix: dlsim_tm4 pucchsim prachsim pdcchsim pbchsim mbmssim
+    #simlist="dlsim_tm4 dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
+    simlist="dlsim ulsim"
     for f in $simlist ; do
       compilations \
       lte-simulators $f \
@@ -668,9 +651,6 @@ function main() {
     compilations \
           lte-simulators coding \
           libcoding.so $dbin/libcoding.so
-#    compilations \
-#	  lte-simulators $config_libconfig_shlib \
-#	  lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
   fi
 
   # Core simulators
@@ -709,7 +689,6 @@ function main() {
   fi
 
 
-
   # Telnet server compilation
   #####################
   if [ "$BUILD_TELNETSRV" = "1" ] ; then
@@ -776,14 +755,6 @@ function main() {
 	      ln -sf liboai_lmssdrdevif.so liboai_device.so
 	      ln -sf $dbin/liboai_lmssdrdevif.so.$REL $dbin/liboai_device.so
 	      echo_info "liboai_device.so is linked to LMSSDR device library"	 
-          elif [ "$HW" == "OAI_IRIS" ] ; then
-                  compilations \
-                      $build_dir oai_irisdevif \
-                      liboai_irisdevif.so $dbin/liboai_irisdevif.so.$REL
-
-              ln -s liboai_irisdevif.so liboai_device.so
-              ln -s $dbin/liboai_irisdevif.so.$REL $dbin/liboai_device.so
-              echo_info "liboai_device.so is linked to IRIS device library"
 	  else 
 	      echo_info "liboai_device.so is not linked to any device library"	    
 	  fi

cmake_targets/lte-simulators/CMakeLists.txt

@@ -1,7 +1,7 @@
 cmake_minimum_required(VERSION 2.8)
+set(RRC_ASN1_VERSION "Rel14")
 set(PACKAGE_NAME "unitary_tests_simulators")
 set(PHYSIM True)
-set(RRC_ASN1_VERSION "Rel14")
 set(RF_BOARD None)
 set(XFORMS True)
 set(ENABLE_ITTI False)
@@ -10,5 +10,4 @@ set(MU_RECIEVER False)
 set(NAS_UE False)
 set(MESSAGE_CHART_GENERATOR False)
 set(RRC_ASN1_VERSION "Rel14")
-set (UE_TIMING_TRACE True)
 include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)

cmake_targets/lte_noS1_build_oai/CMakeLists.template

@@ -7,3 +7,4 @@ set(PDCP_USE_NETLINK_QUEUES False)
 set(LINUX True)
 set(SECU False)
 set(NAS_UE False)
+

cmake_targets/oaisim_build_oai/CMakeLists.template

@@ -1,60 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-
-set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  DEBUG_OMG False )
-set (  DISABLE_XER_PRINT False )
-set (  DRIVER2013 True )
-set (  ENABLE_ITTI True )
-set (  ENABLE_NAS_UE_LOGGING True )
-set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_RAL False )
-set (  ENABLE_SECURITY True )
-set (  ENABLE_STANDALONE_EPC False)
-set (  ENABLE_USE_CPU_EXECUTION_TIME True )
-set (  ENABLE_USE_MME True )
-set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
-set (  ENABLE_VCD_FIFO False )
-set (  ENB_MODE True )
-set (  EXMIMO_IOT True )
-set (  JUMBO_FRAME True )
-set (  LARGE_SCALE False )
-set (  LINK_ENB_PDCP_TO_GTPV1U True)
-set (  LINUX_LIST False )
-set (  LINUX True )
-set (  LOCALIZATION False )
-set (  LOG_NO_THREAD True )
-set (  DEADLINE_SCHEDULER False )
-set (  MAC_CONTEXT 1 )
-set (  MAX_NUM_CCs 1 )
-set (  MESSAGE_CHART_GENERATOR False)
-set (  MSG_PRINT False )
-set (  MU_RECEIVER False )
-set (  NAS_ADDRESS_FIX False )
-set (  NAS_BUILT_IN_UE True)
-set (  NAS_MME False )
-set (  NAS_UE True )
-set (  NB_ANTENNAS_RX "2" )
-set (  NB_ANTENNAS_TX "2" )
-set (  NO_RRM True )
-set (  OAISIM True )
-set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
-set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR2 True )
-set (  OPENAIR_LTE True )
-set (  PACKAGE_NAME "oaisim" )
-set (  PDCP_USE_NETLINK True )
-set (  PDCP_MSG_PRINT False )
-set (  PHY_CONTEXT False )
-set (  PHY_EMUL False )
-set (  PHYSIM True )
-set (  RF_BOARD "False" )
-set (  RLC_STOP_ON_LOST_PDU False )
-set (  RRC_ASN1_VERSION "Rel10" )
-set (  RRC_DEFAULT_RAB_IS_AM True)
-set (  RRC_MSG_PRINT False )
-set (  SECU False )
-set (  SMBV False )
-set (  TEST_OMG False )
-set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
-set (  USE_MME "R10" )
-set (  XER_PRINT False )

cmake_targets/oaisim_mme_build_oai/CMakeLists.template

@@ -1,62 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-
-set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
-set (  DEBUG_OMG False )
-set (  DISABLE_XER_PRINT False )
-set (  DRIVER2013 False )
-set (  ENABLE_ITTI True )
-set (  ENABLE_NAS_UE_LOGGING False )
-set (  ENABLE_NEW_MULTICAST False )
-set (  ENABLE_RAL False )
-set (  ENABLE_SECURITY False )
-set (  ENABLE_STANDALONE_EPC False )
-set (  ENABLE_USE_CPU_EXECUTION_TIME False )
-set (  ENABLE_USE_MME False )
-set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
-set (  ENABLE_VCD_FIFO False )
-set (  ENB_MODE False )
-set (  EPC_BUILD True )
-set (  EXMIMO_IOT False )
-set (  JUMBO_FRAME False )
-set (  LARGE_SCALE False )
-set (  LINK_ENB_PDCP_TO_GTPV1U True)
-set (  LINUX_LIST False )
-set (  LINUX False )
-set (  LOCALIZATION False )
-set (  LOG_NO_THREAD False )
-set (  DEADLINE_SCHEDULER False )
-set (  MAC_CONTEXT 1 )
-set (  MAX_NUM_CCs 1 )
-set (  MSG_PRINT False )
-set (  MU_RECEIVER False )
-set (  NAS_ADDRESS_FIX False )
-set (  NAS_BUILT_IN_EPC True )
-set (  NAS_MME True )
-set (  NAS_NETLINK False )
-set (  NAS_UE False )
-set (  NB_ANTENNAS_RX "2" )
-set (  NB_ANTENNAS_TX "2" )
-set (  NO_RRM False )
-set (  OAISIM False )
-set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
-set (  OAI_NW_DRIVER_USE_NETLINK False )
-set (  OPENAIR2 False )
-set (  OPENAIR_LTE False )
-set (  PACKAGE_NAME "EPC" )
-set (  PDCP_MSG_PRINT False )
-set (  PHY_CONTEXT False )
-set (  PHY_EMUL False )
-set (  PHYSIM False )
-set (  RF_BOARD "False" )
-set (  RRC_ASN1_VERSION "Rel10" )
-set (  RLC_STOP_ON_LOST_PDU False )
-set (  RRC_MSG_PRINT False )
-set (  SECU False )
-set (  SMBV False )
-set (  TEST_OMG False )
-set (  UPDATE_RELEASE_9 True)
-set (  UPDATE_RELEASE_10 True)
-set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
-set (  USE_MME "R10" )
-set (  XER_PRINT False )
-set (  XFORMS False )

cmake_targets/oaisim_noS1_build_oai/CMakeLists.template

@@ -1,63 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-
-set (  DEBUG_OMG False )
-set (  DISABLE_XER_PRINT False )
-set (  DRIVER2013 True )
-set (  ENABLE_ITTI True )
-set (  ENABLE_NAS_UE_LOGGING False )
-set (  ENABLE_NEW_MULTICAST True )
-set (  ENABLE_RAL False )
-set (  ENABLE_SECURITY False )
-set (  ENABLE_STANDALONE_EPC False)
-set (  ENABLE_USE_CPU_EXECUTION_TIME True )
-set (  ENABLE_USE_MME False )
-set (  ENABLE_USE_RAW_SOCKET_FOR_SGI False)
-set (  ENABLE_VCD_FIFO False )
-set (  ENB_MODE True )
-set (  EXMIMO_IOT True )
-set (  JUMBO_FRAME True )
-set (  LARGE_SCALE False )
-set (  LINK_ENB_PDCP_TO_GTPV1U False)
-set (  LINUX_LIST False )
-set (  LINUX True )
-set (  LOCALIZATION False )
-set (  LOG_NO_THREAD 1 )
-set (  DEADLINE_SCHEDULER False )
-set (  MAC_CONTEXT 1 )
-set (  MAX_NUM_CCs 1 )
-set (  MESSAGE_CHART_GENERATOR         False )
-set (  MESSAGE_CHART_GENERATOR_RLC_MAC False )
-set (  MESSAGE_CHART_GENERATOR_PHY     False )
-set (  MSG_PRINT False )
-set (  MU_RECEIVER False )
-set (  NAS_ADDRESS_FIX False )
-set (  NAS_BUILT_IN_UE False)
-set (  NAS_MME False )
-set (  NAS_UE False )
-set (  NB_ANTENNAS_RX "2" )
-set (  NB_ANTENNAS_TX "2" )
-set (  NO_RRM True )
-set (  OAISIM True )
-set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
-set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR2 True )
-set (  OPENAIR_LTE True )
-set (  PACKAGE_NAME "oaisim" )
-set (  PDCP_USE_NETLINK True )
-set (  PDCP_MSG_PRINT False )
-set (  PHY_CONTEXT False )
-set (  PHY_EMUL False )
-set (  PHYSIM True )
-set (  RF_BOARD "False" )
-set (  RRC_ASN1_VERSION "Rel10" )
-set (  RLC_STOP_ON_LOST_PDU False )
-set (  RRC_MSG_PRINT False )
-set (  SECU False )
-set (  SMBV False )
-set (  TEST_OMG False )
-set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
-set (  USE_MME "R10" )
-set (  XER_PRINT False )
-set (  DEBUG_PHY False )
-set (  DEBUG_PHY_PROC False)
-set (  DEBUG_DLSCH False)

cmake_targets/tools/build_helper

@@ -32,8 +32,8 @@ OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
 OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
 case "$OS_DISTRO" in
   fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
-  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum --skip-broken"; CMAKE="cmake3" ;;
-  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum --skip-broken"; CMAKE="cmake3" ;;
+  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
+  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum"; CMAKE="cmake3" ;;
   debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
   ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
 esac
@@ -102,7 +102,6 @@ check_supported_distribution() {
         "ubuntu14.04") return 0 ;;
         "fedora24")    return 0 ;;
         "rhel7")       return 0 ;;
-	"rhel7.6")     return 0 ;; 
         "centos7")     return 0 ;;
     esac
     return 1
@@ -253,7 +252,7 @@ install_usrp_uhd_driver_from_source(){
     rm -rf /tmp/uhd
     git clone https://github.com/EttusResearch/uhd.git
     cd uhd
-    git checkout tags/v3.13.0.2
+    git checkout tags/release_003_010_001_001
     mkdir -p host/build
     cd host/build
     $CMAKE ../
@@ -311,20 +310,10 @@ install_usrp_uhd_driver() {
         # On newer kernels, it fails to install
         $SUDO apt-get -y install uhd-host
     fi
-    # quick workaround for RHE7.6
-    local distribution=$(get_distribution_release)
     if [ -z $1 ]; then
-      if [[ "$distribution" == "rhel7.6" ]]; then
-          $SUDO /usr/local/bin/uhd_images_downloader
-      else
-          $SUDO uhd_images_downloader
-      fi
+      $SUDO uhd_images_downloader
     else
-      if [[ "$distribution" == "rhel7.6" ]]; then
-          $SUDO /usr/local/bin/uhd_images_downloader -i $1
-      else
-          $SUDO uhd_images_downloader -i $1
-      fi
+      $SUDO uhd_images_downloader -i $1
     fi
 }
 
@@ -383,81 +372,13 @@ check_install_lmssdr_driver(){
         else
                 echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                            " from sources. check:"
-                echo_info "https://wiki.myriadrf.org/Lime_Suite"
+                echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
                 echo_fatal "Cannot compile lmssdr device"
 	fi
 
 
 }
 
-install_soapy_from_source(){
-    soapy_install_log=$OPENAIR_DIR/cmake_targets/log/soapy_install_log.txt
-    echo_info "\nInstalling Soapy EcoSystem from source. The log file for Soapy installation is here: $soapy_install_log "
-    (
-    cd /tmp
-    echo "Downloading SoapySDR"
-    rm -rf /tmp/soapysdr
-    git clone -b soapy-sdr-0.7.0 --single-branch https://github.com/pothosware/SoapySDR.git
-    cd SoapySDR
-    #git checkout tags/release_003_010_001_001
-    mkdir -p build
-    cd build
-    $CMAKE ../
-    echo "Compiling SoapySDR"
-    make -j`nproc`
-    $SUDO make install
-    $SUDO ldconfig
-    cd /tmp
-    echo "Downloading SoapyRemote"
-    rm -rf /tmp/soapyremote
-    git clone -b soapy-remote-0.5.0 --single-branch https://github.com/pothosware/SoapyRemote.git
-    cd SoapyRemote
-    #git checkout tags/release_003_010_001_001
-    mkdir -p build
-    cd build
-    cmake ../
-    echo "Compiling SoapyRemote"
-    make -j`nproc`
-    $SUDO make install
-    $SUDO ldconfig
-    ) >& $soapy_install_log
-}
-
-install_soapy_iris_from_source(){
-    iris_install_log=$OPENAIR_DIR/cmake_targets/log/iris_install_log.txt
-    echo_info "\nInstalling Iris driver from source. The log file for Iris driver installation is here: $iris_install_log "
-    (
-    cd /tmp
-    echo "Downloading SoapyIris"
-    rm -rf /tmp/sklk-soapyiris
-    git clone -b soapy-iris-2018.08.0.1 --single-branch https://github.com/skylarkwireless/sklk-soapyiris.git
-    cd sklk-soapyiris
-    mkdir -p build
-    cd build
-    cmake ../
-    echo "Compiling SoapyIris"
-    make -j`nproc`
-    $SUDO make install
-    $SUDO ldconfig
-    ) >& $iris_install_log
-}
-
-check_install_soapy () {
-    #if [[ "$OS_DISTRO" == "ubuntu" ]]; then
-        #first we remove old installation
-    $SUDO apt-get remove -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote || true
-        #$SUDO add-apt-repository -y ppa:myriadrf/drivers
-        #$SUDO apt-get update
-        #$SUDO apt-get install -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote
-
-    #elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
-    #    $SUDO $INSTALLER -y install software-properties-common python3-software-properties python-software-properties subversion git python3 python-numpy python3-numpy cmake swig python-dev
-    install_soapy_from_source
-    #fi
-    install_soapy_iris_from_source
-
-}
-
 check_install_additional_tools (){
   $SUDO $INSTALLER update -y
   if [[ "$OS_DISTRO" == "ubuntu" ]]; then
@@ -762,7 +683,7 @@ install_asn1c_from_source(){
     # better to use a given commit than a branch in case the branch
     # is updated and requires modifications in the source of OAI
     #git checkout velichkov_s1ap_plus_option_group
-    git checkout 0a7524184f16e7093990a31d8d4db487a16e5782
+    git checkout d3aed06bb2bec7df1b5c6d0333f8c7dfc5993372
     autoreconf -iv
     ./configure
     make -j`nproc`

cmake_targets/tools/init_nas_s1

@@ -52,20 +52,20 @@ load_module ../../targets/bin/ue_ip.ko
 
 if [ "$1" = "UE" ]; then
   echo "bring up $LTEIF interface for UE"
-  sudo ifconfig $LTEIF up
+  ifconfig $LTEIF up
 fi
 
-sudo ip route flush cache
+ip route flush cache
 sleep 1
-sudo sysctl -w net.ipv4.conf.all.log_martians=1
+sysctl -w net.ipv4.conf.all.log_martians=1
 echo "Disabling reverse path filtering"
-sudo sysctl -w net.ipv4.conf.all.rp_filter=0
-sudo ip route flush cache
+sysctl -w net.ipv4.conf.all.rp_filter=0
+ip route flush cache
 
 # Check table 200 lte in /etc/iproute2/rt_tables
 fgrep lte /etc/iproute2/rt_tables  > /dev/null 
 if [ $? -ne 0 ]; then
     echo "200 lte " >> /etc/iproute2/rt_tables
 fi
-sudo ip rule add fwmark 1 table lte
-sudo ip route add default dev $LTEIF table lte
+ip rule add fwmark 1 table lte
+ip route add default dev $LTEIF table lte

cmake_targets/tools/make_asn1c_includes.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-GENERATED_FULL_DIR=$1
-shift
-ASN1_SOURCE_DIR=$1
-shift
-export ASN1C_PREFIX=$1 
-shift
-options=$*
-done_flag="$GENERATED_FULL_DIR"/done
-if [ "$done_flag" -ot $ASN1_SOURCE_DIR ] ; then 
-   rm -f "$GENERATED_FULL_DIR"/${ASN1C_PREFIX}*.c "$GENERATED_FULL_DIR"/${ASN1C_PREFIX}*.h
-   mkdir -p "$GENERATED_FULL_DIR"
-   asn1c -pdu=all -fcompound-names -gen-PER -no-gen-OER -no-gen-example $options -D $GENERATED_FULL_DIR $ASN1_SOURCE_DIR |& egrep -v "^Copied|^Compiled" | sort -u
-fi
-touch $done_flag

common/config/DOC/config.md

@@ -1,11 +0,0 @@
-# OAI configuration module
-
-The configuration module provides an api that other oai components can use to get parameters at init time. It defines a parameter structure, used to describe parameters attributes (for example name and  type). The same structure includes a pointer to the variable where the configuration module writes the parameter value, at run time, when calling config_get or config_getlist functions. For each parameter a function to check the value can be specified and pre-defined functions  are provided for some common parameter validations (integer in a range or in a list, string in a list).  The module also include an api to check that no unknown options have been entered on the command line and a a mechanism to display a help text for suppoted parameters.
-
-## Documentation
-
-* [runtime usage](config/rtusage.md)
-* [developer usage](config/devusage.md)
-* [module architecture](config/arch.md)
-
-[oai Wikis home](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home)

common/config/DOC/config/arch.md

@@ -1,7 +0,0 @@
-# config module source files
-![configmodule_srcdir](/uploads/fdc3e96011fd5592440900dfa05b4701/configmodule_srcdir.png)  
-# config module components
-![configmodule_components](/uploads/54f8a3953d5ee53717cd9a3b71f85c68/configmodule_components.png)
-
-
-[Configuration module home](../config.md)

common/config/DOC/config/devusage.md

@@ -1,20 +0,0 @@
-The configuration module objectives are 
-1. Allow easy parameters management in oai, helping the development of a flexible, modularized and fully configurable softmodem.
-1. Use a common configuration API in all oai modules
-1. Allow development of alternative configuration sources without modifying the oai code. Today the only delivered configuration source is the libconfig format configuration file.  
-
-As a developer you may need to look at these sections:
-
-* [add parameters in an existing section](devusage/addaparam.md)
-* [add a parameter set, in a new section](devusage/addparamset.md)
-* [configuration module API](devusage/api.md) 
-* [configuration module public structures](devusage/struct.md)  
-
-Whatever your need is, configuration module usage examples can be found in oai sources:  
-*  complex example, using all the configuration module functionalities, including parameter checking: 
-[NB-IoT configuration code](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/openair2/ENB_APP/NB_IoT_config.c) and [NB-IoT configuration include file](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/openair2/ENB_APP/NB_IoT_paramdef.h)
-*  very simple example, just reading a parameter set corresponding to a dedicated section:  the telnetsrv_autoinit function in [common/utils/telnetsrv/telnetsrv.c, around line 726](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/utils/telnetsrv/telnetsrv.c#L726)
-*  an example with run-time definition of parameters, in the logging sub-system: the log_getconfig function at the top of [openair2/UTIL/LOG/log.c](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/openair2/UTIL/LOG/log.c)
-
-
-[Configuration module home](../config.md)

common/config/DOC/config/devusage/addaparam.md

@@ -1,86 +0,0 @@
-To add a new parameter in an existing section you  insert an item in a `paramdef_t` array, which describes the parameters to be read in the existing `config_get` call. You also need to increment the numparams argument.  
-
-existing code:  
-```c
-unsigned int varopt1;
-paramdef_t someoptions[] = {
-/*---------------------------------------------------------------------------------*/
-/*                  configuration parameters for some module                       */
-/* optname     helpstr     paramflags    XXXptr      defXXXval      type    numelt */
-/*---------------------------------------------------------------------------------*/
-   {"opt1",  "<help opt1>",   0,      uptr:&varopt1, defuintval:0, TYPE_UINT,  0 },
-};
-
-config_get( someoptions,sizeof(someoptions)/sizeof(paramdef_t),"somesection"); 
-
-```
-new code:  
-```c
-unsigned int varopt1;
-
-
-/* varopt2 will be allocated by the config module and free at end_configmodule call
-   except if PARAMFLAG_NOFREE bit is set in paramflags field*/
-char *varopt2;
-paramdef_t someoptions[] = {
-/*---------------------------------------------------------------------------------*/
-/*                  configuration parameters for some module                       */
-/* optname     helpstr     paramflags    XXXptr      defXXXval      type    numelt */
-/*---------------------------------------------------------------------------------*/
-   {"opt1",  "<help opt1>",   0,      uptr:&varopt1,  defuintval:0,TYPE_UINT,  0   },
-   {"opt2",  "<help opt2>",   0,      strptr:&varopt2,defstrval:"",TYPE_STRING,0   },
-};
-
-config_get( someoptions,sizeof(someoptions)/sizeof(paramdef_t),"somesection"); 
-
-```
-
-The corresponding configuration file may now include opt2 parameter in the somesection section:
-
-```c
-somesection =
-{
-opt1 = 3;
-opt2 = "abcd";
-};
-```
-
-In these examples the variables used to retrieve the parameters values are pointed by the `uptr` or `strptr` fields of the `paramdef_t` structure. After the `config_get` call `varopt1` and `varopt2` have been set to the value specified in the config file. It is also possible to specify a `NULL` value to the `< XXX >ptr` fields, which are then allocated by the config module and possibly free when calling `config_end()`, if the `PARAMFLAG_NOFREE` bit has not been set in the `paramflags` field.
-
-The configuration module provides a mechanism to check the parameter value read from the configuration source. The following functions are implemented:
-1.  Check an integer parameter against a list of authorized values
-1.  Check an integer parameter against a list of authorized values and set the parameter to a new value
-1.  Check an integer parameter against a range
-1.  Check a C string parameter against a list of authorized values
-1. Check a C string parameter against a list of authorized values and set the parameter to a new integer value
-
- A `checkedparam_t` structure array provides the parameter verification procedures:
-
-```c
-/* 
-   definition of the verification to be done on param opt1 and opt2.
-   opt1 is an integer option we must be set to 0,2,3,4 or 7 in the
-   config source.  
-   if opt1 is set to 0 in the config file, it will be set to 1, etc
-   opt2 is C string option with the authorize values "zero","oneThird","twoThird","one"
- */
-#define OPT1_OKVALUES {0,2,3,4,7}
-#define OPT1_NEWVALUES {1,1,0,6,9}
-#define OPT2_OKVALUES {"zero","oneThird","twoThird","one"}
-
-#define OPT_CHECK_DESC { \
-             { .s1a= { config_check_modify_integer, OPT1_OKVALUE, OPT1_NEWVALUES ,5 }}, \
-             { .s3=  { config_check_strval, OPT2_OKVALUES,4 }}, \
-}
-checkedparam_t checkopt[] = OPT_CHECK_DESC;
-.....
-/* assign the verification procedures to the parameters definitions */
-for(int i=0 ; i < sizeof(someoptions)/sizeof(paramdesc_t) ; i ++) {
-    someoptions[i].chkPptr = &(checkopt[i]);
-}
-....
-```
-When you need a specific verification algorithm, you can provide your own verification function and use it in place of the available ones, in the `checkedparam_t` union. If no existing structure definition match your need, you can enhance the configuration module. You then have to add a new verification function in https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_userapi.c and add a new structure definition in the `checkedparam_t` type defined in https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_paramdesc.h
-
-[Configuration module developer main page](../../config/devusage.md)  
-[Configuration module home](../../config.md)

common/config/DOC/config/devusage/addparamset.md

@@ -1,131 +0,0 @@
-The configuration module maps a configuration file section to a `paramdef_t` structure array. One `config_get` call can be used to return the values of all the parameters described in the `paramdef_t` array.
-Retrieving a single occurence of a parameter set ( a group in the libconfig terminology) is just a two steps task:
-1.  describe the parameters in a `paramdef_t` array
-1.  call the `config_get` function  
-
-
-[config_get example](../../config/devusage/addaparam.md)
-
-
-In oai some parameters set may be instantiated a variable number of occurrences. In a configuration file this is mapped to lists of group of parameters, with this syntax:
-```c
-NB-IoT_MACRLCs =
-/* start list element 1 */
-(
-  /* start a group of parameters */
-  {
-  num_cc = 2;
-  .....
-  remote_s_portd = 55001;
-  }
-),
-/* start list element 2 */
-(
-  /* start a group of parameters */
-  {
-  num_cc = 1;
-  ......
-  remote_s_portd = 65001;
-  }
-);
-
-```
-The configuration module provides the `config_getlist` call to support lists of group of parameters. Below is a commented code example, using the config_getlist call.  
-
-```c
-/* name of section containing the list */
-#define NBIOT_MACRLCLIST_CONFIG_STRING      "NB-IoT_MACRLCs"
-
-/* 
-The following macro define the parameters names, as used in the
-configuration file
-*/   
-#define CONFIG_STRING_MACRLC_CC             "num_cc" 
-.....
-#define CONFIG_MACRLC_S_PORTD               "remote_s_portd" 
-
-/*
-   now define a macro which will be used to initialize the NbIoT_MacRLC_Params
-   variable. NbIoT_MacRLC_Params is an array of paramdef_t structure, each item
-   describing a parameter. When using the config_getlist call you must let the config
-   module allocate the memory for the parameters values.
-*/
-/*------------------------------------------------------------------------------------------------------------*/
-/*   optname               helpstr   paramflags    XXXptr              defXXXval                  type           numelt     */ 
-/*------------------------------------------------------------------------------------------------------------*/
-
-#define MACRLCPARAMS_DESC { \
-{CONFIG_STRING_MACRLC_CC, NULL,     0,          uptr:NULL,           defintval:1,           TYPE_UINT,     0}, \
-.............  \
-{CONFIG_MACRLC_S_PORTD,   NULL,     0,          uptr:NULL,           defintval:50021,           TYPE_UINT,     0}, \
-}  
-
-/* 
-the following macros define the indexes used to access the NbIoT_MacRLC_Params array
-items. They must be maintained consistent with the previous  MACRLCPARAMS_DESC macro
-which is used to initialize the NbIoT_MacRLC_Params variable
-*/
-#define MACRLC_CC_IDX                                          0
-.........
-#define MACRLC_REMOTE_S_PORTD_IDX                              16
-
-
-
-void RCconfig_NbIoTmacrlc(void) {
- 
-
-/*
-   define and initialize the array of paramdef_t structures describing the groups of
-   parameters we want to read. It will be passed as the second argument of the 
-   config_getlist call, which will use it as an input only argument.
-*/
-  paramdef_t NbIoT_MacRLC_Params[] = MACRLCPARAMS_DESC;
-
-/* 
-      now define and initialize a paramlist_def_t structure which will be passed
-   to the config_getlist call. The first field is the only one to be initialized
-   it contains the name of the section to be read. 
-   that section contains the list of group of parameters.
-      The two other fields are output parameters used to return respectively
-   a pointer to a two dimensional array of paramdef_t structures pointers, and the 
-   number  of items in the list of groups (size of first dimension, the second one
-   being the number of parameters in each group.
-*/ 
-  paramlist_def_t NbIoT_MacRLC_ParamList = {NBIOT_MACRLCLIST_CONFIG_STRING,NULL,0};
-
-
- /* 
-   the config_getlist will allocate the second field of the paramlist_def_t structure, a 
-two dimensional array of paramdef_t pointers. In each param_def item it will allocate 
-the value pointer and set the value to what it will get from the config source. The
-numelt field of the paramlist_def_t structure will be set to the number of groups of
-parameters in the list.
-    in this example the last argument of config_getlist is unused, it may contain a
-character string, used as a prefix for the section name. It has to be specified when the
-list to be read is under another section.
-*/  
-  config_getlist( &NbIoT_MacRLC_ParamList,NbIoT_MacRLC_Params,
-                  sizeof(NbIoT_MacRLC_Params)/sizeof(paramdef_t), 
-                  NULL);
-  
-/* 
-  start a loop in the nuber of groups in the list, the numelt field of the
-  paramlist_def_t structure has been set in the config_getlist call
-*/
-  for (j=0 ; j<NbIoT_MacRLC_ParamList.numelt ; j++) {
-
-..........
- 
-/* access the MACRLC_REMOTE_S_PORTD parameter in the j ieme group of the list */
-	RC.nb_iot_mac[j]->eth_params_s.remote_portd = 
-               *(NbIoT_MacRLC_ParamList.paramarray[j][MACRLC_REMOTE_S_PORTD_IDX].iptr);
-............
-	
-  } // MacRLC_ParamList.numelt > 0
-}
-
-
-```  
-
-[Configuration module developer main page](../../config/devusage.md)  
-[Configuration module home](../../config.md)

common/config/DOC/config/devusage/api.md

@@ -1,49 +0,0 @@
-```c
-configmodule_interface_t *load_configmodule(int argc, char **argv, uint32_t initflags)
-```
-* Parses the command line options, looking for the –O argument
-* Loads the `libparams_<configsource>.so` (today `libparams_libconfig.so`)  shared library
-* Looks for `config_<config source>_init` symbol and calls it , passing it an array of string corresponding to the « : » separated strings used in the –O option
-* Looks for `config_<config source>_get`, `config_<config source>_getlist` and  `config_<config source>_end` symbols which are the three functions a configuration library should implement. Get and getlist are mandatory, end is optional.
-* Stores all the necessary information in a `configmodule_interface_t structure`, which is of no use for caller as long as we only use one configuration source.
-*  if the bit CONFIG_ENABLECMDLINEONLY is set in `initflags` then the module allows parameters to be set only via the command line. This is used for the oai UE.
-
-```c
-void End_configmodule(void)
-```
-* Free memory which has been allocated by the configuration module since its initialization.
-* Possibly calls the `config_<config source>_end` function
-
-```c
-int config_get(paramdef_t *params,int numparams, char *prefix)
-```
-* Reads as many parameters as described in params, they must all be in the same configuration file section
-* Calls the `config_<config source>_get` function
-* Calls the `config_process_cmdline` function
-* `params` points to an array of `paramdef_t` structures which describes the parameters to be read, possibly including a pointer to a checking function. The following bits can possibly be set in the `paramflags` mask before calling
- - `PARAMFLAG_MANDATORY`: -1 is returned if the parameter is not explicitly defined in the config source.
- - `PARAMFLAG_DISABLECMDLINE`: parameter cannot be modified via the command line
- - `PARAMFLAG_DONOTREAD`: ignore the parameter, can be used at run-time, to alter a pre-defined `paramdef_t` array which is used in several `config_get` or/and `config_getlist` calls.
- - `PARAMFLAG_NOFREE`: do not free the memory possibly allocated by the config module to store the value of the parameter. Default behavior is for the config module to free the memory it has allocated when the `config_end` function is called.
- - `PARAMFLAG_BOOL`: Only relevant for integer types. tell the config module that when processing the command line, the corresponding option can be specified without any arggument and that in this case it must set the value to 1.  
-
-* `params` is also used as an output parameter, `< XXX >ptr >` field  is used by the config module to store the value it has read. The following bits can possibly be set in the `paramflags` mask after the call:
-  - `PARAMFLAG_MALLOCINCONFIG`: memory has been allocated for the ` < XXX >ptr > ` field
-  - `PARAMFLAG_PARAMSET`: parameter has been found in the config source, it is not set to default value.
-  - `PARAMFLAG_PARAMSET`: parameter has been set to its default value
-* `numparams` is the number of entries in the params array
-* `prefix` is a character string to be appended to the parameters name, it defines the parameters position in the configuration file hierarchy (the section name in libconfig terminology). 
-* The returned value is the number of parameters which have been assigned a value or -1 if a severe error occured
-
-```c
-int config_libconfig_getlist(paramlist_def_t *ParamList, paramdef_t *params, int numparams, char *prefix)
-```
-* Reads multiple occurrences of a parameters array
-* Calls the `config_<config source>_get` function for each list occurrence
-* `params` points to an array of `paramdef_t` structures which describes the parameters in each occurrence of the list
-* `ParamList`  points to a structure, where `paramarray` field points to an array of `paramdef_t` structure, allocated by the function. It is used to return the values of the parameters.
-* The returned value is the number of occurrences in the list or -1 in case of severe error  
-
-
-[Configuration module developer main page](../../config/devusage.md)  
-[Configuration module home](../../config.md)

common/config/DOC/config/devusage/struct.md

@@ -1,85 +0,0 @@
-# `paramdef_t`structure
-It is defined in include file [ common/config/config_paramdesc.h ](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_paramdesc.h#L103). This structure is used by developers to describe parameters and by the configuration module to return parameters value. A pointer to a `paramdef_t` array is passed to `config_get` and `config_getlist` calls to instruct the configuration module what parameters it should read.
-
-| Fields     | Description                                                       | I/O |
-|:-----------|:------------------------------------------------------------------|----:|
-| `optname`    | parameter name, as used when looking for it in the config source, 63 bytes max (64 with trailing \0) | I |
-| `helstr`     | pointer to a C string printed when using --help on the command line | I |
-| `strptr` `strlistptr` `u8ptr` `i8ptr` `u16ptr` `i16ptr` `uptr` `iptr` `u64ptr` `i64ptr` `dblptr` `voidptr` | a pointer to a variable where the parameter value(s) will be returned. This field is an anonymous union, the supported pointer types have been built to avoid type mismatch warnings at compile time. | O |
-| `defstrval` `defstrlistval` `defuintval` `defintval` `defint64val` `defintarrayval` `defdblval` | this field is an anonymous union, it can be used to define the default value for the parameter. It is ignored if `PARAMFLAG_MANDATORY` is set in the `paramflags` field.| I |
-| `type` | Supported parameter types are defined as integer macros. Supported simple types are `TYPE_STRING`, parameter value is returned in `strptr` field,  `TYPE_INT8` `TYPE_UINT8` `TYPE_INT16` `TYPE_UINT16` `TYPE_INT32` `TYPE_UINT32` `TYPE_INT64` `TYPE_UINT64`, parameter value is returned in the corresponding uXptr or iXptr, `TYPE_MASK`, value is returned in `u32ptr`, `TYPE_DOUBLE` value is returned in `dblptr`, `TYPE_IPV4ADDR` value is returned in binary, network bytes order in `u32ptr` field. `TYPE_STRINGLIST`, `TYPE_INTARRAY` and `TYPE_UINTARRAY` are multiple values types. Multiple values are returned in respectively, `strlistptr`, `iptr` and `uptr` fields which then point to arrays. The  `numelt` field gives the number of item in the array. | I |
-| `numelt` | For `TYPE_STRING` where `strptr` points to a preallocated string, this field must contain the size in bytes of the available memory. For all multiple values types, this field contains the number of values in the value field.| I/O |
-| `chkPptr` | possible pointer to the structure containing the info used to check parameter values | I |
-| `processedvalue` | When `chkPptr` is not `ǸULL`, is used to return a value, computed from the original parameter, as read from the configuration source. | O |  
-  
-# `paramlist_def_t`structure
-It is defined in include file [ common/config/config_paramdesc.h ](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_paramdesc.h#L160). 
-It is used as an argument to `config_getlist` calls, to get values of multiple occurrences of group of parameters.  
-
-| Fields     | Description                                                       | I/O |
-|:-----------|:------------------------------------------------------------------|----:|
-| `listname`    | Name of the section containing the list,  63 bytes max (64 with trailing \0). It is used to prefix each paramater name when looking for its value. In the libconfig syntax, the parameter name full path build by the configuration module is: listname.[occurence index].optname. | I |
-| `paramarray`    | Pointer to an array of `ǹumelt` `paramdef_t` pointers. It is allocated by the configuration module and is used to return the parameters values. All input fields of each `paramdef_t` occurence are a copy of the `paramdef_t` argument passed to the `config_getlist` call. | O |
-| `numelt` | Number of items in the `paramarray` field | O |
-
-# `checkedparam_t` union
-It is defined in include file [ common/config/config_paramdesc.h ](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_paramdesc.h#L62). 
-This union of structures is used to provide a parameter checking mechanism. Each `paramdef_t` instance may include a pointer to a `checkedparam_t`structure which is then used by the configuration module to check the value it got from the config source.
-Each structure in the union provides one parameter verification method, which returns `-1` when the verification fails. Currently the following structures  are defined in the `checkedparam_t` union:
-
-| structure name    | Description                                                     | 
-|:-----------|:------------------------------------------------------------------|----:|
-| `s1` | check an integer against a list of authorized values |
-| `s1a` | check an integer against a list of authorized values and set the parameter value to another integer depending on the read value|
-| `s2` | check an integer against an authorized range, defined by its min and max value|
-| `s3` | check a string against a list of authorized values |
-| `s3a` | check a string against a list of authorized values and set the parameter value to an integer depending on the read value|
-| `s4` | generic structure, to be used to provide a specific, not defined in the configuration module, verification algorithm |
-
-each of these structures provide the required fields to perform the specified parameter check. The first field is a pointer to a function, taking one argument, the `paramdef_t` structure describing the parameter to be checked. This function is called by the configuration module, in the `config_get` call , after the parameter value has been set, it then uses the other fields of the structure to perform the check.
-The configuration module provides an implementation of the functions to be used to check parameters, qs described below.
-
-## `s1` structure
-| field    | Description                                                     | 
-|:-----------|:------------------------------------------------------------------|
-| `f1` | pointer to the checking function. Initialize to `config_check_intval` to use the config module implementation |
-| `okintval` | array of `CONFIG_MAX_NUMCHECKVAL` integers containing the authorized values |
-| `num_okintval` | number of used values in `okintval` |
-
-## `s1a` structure
-| field    | Description                                                     | 
-|:-----------|:------------------------------------------------------------------|
-| `f1a` | pointer to the checking function. Initialize to `config_check_modify_integer` to use the config module implementation |
-| `okintval` | array of `CONFIG_MAX_NUMCHECKVAL` integers containing the authorized values |
-| `setintval` | array of `CONFIG_MAX_NUMCHECKVAL` integers containing the values to be used for the parameter. The configuration module implementation set the parameter value to `setintval[i]` when the configured value is `okintval[i]` |
-| `num_okintval` | number of used values in `okintval` and `setintval` |
-
-## `s2` structure
-| field    | Description                                                     | 
-|:-----------|:------------------------------------------------------------------|
-| `f2` | pointer to the checking function. Initialize to `config_check_intrange` to use the config module implementation |
-| `okintrange` | array of 2 integers containing the min and max values for the parameter |
-
-## `s3` structure
-| field    | Description                                                     | 
-|:-----------|:------------------------------------------------------------------|
-| `f3` | pointer to the checking function. Initialize to `config_check_strval` to use the config module implementation |
-| `okstrval` | array of `CONFIG_MAX_NUMCHECKVAL` C string pointers containing the authorized values |
-| `num_okstrval` | number of used values in `okstrtval` |
-
-
-## `s3a` structure
-| field    | Description                                                     | 
-|:-----------|:------------------------------------------------------------------|
-| `f3a` | pointer to the checking function. Initialize to `config_checkstr_assign_integer` to use the config module implementation |
-| `okstrval` | array of `CONFIG_MAX_NUMCHECKVAL` C string pointers containing the authorized values |
-| `setintval` | array of `CONFIG_MAX_NUMCHECKVAL` integers containing the values to be used for the parameter. The configuration module implementation set the parameter value to `setintval[i]` when the configured value is `okstrval[i]` |
-| `num_okstrval` | number of used values in `okintval` and `setintval` |
-
-## `s4` and `s5` structures
-| field    | Description                                                     | 
-|:-----------|:------------------------------------------------------------------|
-| `f4`  or `f5` | pointer to the checking function. they are generic structures to be used  when no existing structure provides the required parameter verification. `f4` takes one argument, the `paramdef_t` structure corresponding to the parameter to be checked (`int  (*f4)(paramdef_t *param)`), `f5` taxes no argument (`void (*checkfunc)(void)`) |
-
-[Configuration module developer main page](../../config/devusage.md)  
-[Configuration module home](../../config.md)

common/config/DOC/config/rtusage.md

@@ -1,109 +0,0 @@
- 
-   -O  is the only mandatory command line option to start the eNodeb softmodem (lte-softmodem executable), it is used to specify the configuration source with the associated parameters:  
-```bash
-$ ./lte-softmodem -O <configsource>:<parameter1>:<parameter2>:...
-```
-  The configuration module can also be used without a configuration source, ie to only parse the command line. In this case the -O switch is optional. This mode is used in the ue-softmodem executable and by the phy_simulators executables (ulsim, dlsim)  
-
-Currently the available config sources are:
-
-- **libconfig**: libconfig file. [libconfig file format](http://www.hyperrealm.com/libconfig/libconfig_manual.html#Configuration-Files) Parameter1 is the file path and parameter 2 can be used to specify the level of console messages printed by the configuration module.  
-```bash
-$ ./lte-softmodem -O libconfig:<config>:dbgl<debuglevel>
-```
-- **cmdlineonly**: command line only, the default mode for lte-uesoftmodem and the phy simiulators. In this case -O may be used to specify the config module debug level.
-
-The debug level is a mask:  
-*  bit 1: print parameters values 
-*  bit 2: print memory allocation/free performed by the config module
-*  bit 3: print command line processing messages
-*  bit 4: disable execution abort when parameters checking fails
-
-As a oai user, you may have to use bit 1 (dbgl1) , to check your configuration and get the full name of a parameter you would like to modify on the command line. Other bits are for developers usage, (dbgl7 will print all debug messages).  
-
-```bash
-$ ./lte-softmodem -O libconfig:<config>:dbgl1  
-```
-```bash
-$ ./lte-uesoftmodem -O cmdlineonly:dbgl1
-```
-To get help on supported parameters you can use specific options:
-*  ---help: print help for command line only parameters and for parameters not defined in a specific section 
-	*  ---help_< prefix > : print help for parameters defined under the section < prefix >
-
-```
-./lte-softmodem -O libconfig:/usr/local/oai/conf/enb.nbiot.band7.tm1.50PRB.usrpb210.conf   --help
-[CONFIG] get parameters from libconfig /usr/local/oai/conf/enb.nbiot.band7.tm1.50PRB.usrpb210.conf , debug flags: 0x00000000
-.............................................
-[LIBCONFIG] (root): 19/19 parameters successfully set, (16 to default value)
-
------Help for section (root section)            : 019 entries------
-    --rf-config-file: Configuration file for front-end (e.g. LMS7002M)
-    --ulsch-max-errors: set the eNodeB max ULSCH erros
-    --phy-test: test UE phy layer, mac disabled
-    --usim-test: use XOR autentication algo in case of test usim mode
-    --emulate-rf: Emulated RF enabled(disable by defult)
-    --clock: tells hardware to use a clock reference (0:internal, 1:external, 2:gpsdo)
-    --wait-for-sync: Help string not specified
-    --single-thread-enable: Disables single-thread mode in lte-softmodem
-    -C: Set the downlink frequency for all component carriers
-    -a: Channel id offset
-    -d: Enable soft scope and L1 and L2 stats (Xforms)
-    -q: Enable processing timing measurement of lte softmodem on per subframe basis 
-    -S: Skip the missed slots/subframes 
-    --numerology: adding numerology for 5G
-    --parallel-config: three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'
-    --worker-config: two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'
-    --nbiot-disable: disable nb-iot, even if defined in config
-    --noS1: Disable s1 interface
-    --nokrnmod: (noS1 only): Use tun instead of namesh module 
---------------------------------------------------------------------
-
-[LIBCONFIG] (root): 4/4 parameters successfully set, (4 to default value)
-
------Help for section (root section)            : 004 entries------
-    -R: Enable online log 
-    -g: Set the global log level, valide options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))
-    --telnetsrv: Start embedded telnet server 
-    --msc: Enable the MSC tracing utility 
---------------------------------------------------------------------
-
-[LIBCONFIG] loader: 2/2 parameters successfully set, (2 to default value)
-[LIBCONFIG] loader.telnetsrv: 2/2 parameters successfully set, (1 to default value)
-[LOADER] library libtelnetsrv.so is not loaded: libtelnetsrv.so: cannot open shared object file: No such file or directory
-Getting ENBSParams
-[LIBCONFIG] (root): 3/3 parameters successfully set, (1 to default value)
-
------Help for section (root section)            : 003 entries------
-    --Asn1_verbosity: Help string not specified
-    --Active_eNBs: Help string not specified
-    --noS1: Help string not specified
---------------------------------------------------------------------
-
-/usr/local/oai/issue390_configmodule_cmdlinebug/openairinterface5g/common/config/config_cmdline.c:224 config_process_cmdline() Exiting OAI softmodem: [CONFIG] Exiting after displaying help
-
-```
-
-For the lte-softmodem (the eNodeB) The config source parameter defaults to libconfig, preserving the initial -O option format. In this case you cannot specify the debug level.  
-
-```bash
-$ ./lte-softmodem -O <config>
-```
-
-Configuration file parameters, except for the configuration file path,  can be specified in a **config** section in the configuration file:  
-
-```
-config:
-{
-    debugflags = 1;
-}
-```
-Configuration files examples can be found in the targets/PROJECTS/GENERIC-LTE-EPC/CONF sub-directory of the oai source tree. To minimize the number of configuration file to maintain, any parameter can also be specified on the command line. For example to modify the lte bandwidth to 20 MHz where the configuration file specifies 10MHz you can enter:
-
-```bash
-$ ./lte-softmodem -O <config> --eNBs.[0].component_carriers.[0].N_RB_DL 100
-```  
-
-As specified earlier, use the dbgl1 debug level to get the full name of a parameter you would like to modify on the command line.
-
-[Configuration module home](../config.md)

common/config/config_cmdline.c

@@ -20,7 +20,7 @@
  */
 
 /*! \file common/config/cmdline/config_libconfig.c
- * \brief configuration module, command line parsing implementation
+ * \brief configuration module, command line parsing implementation 
  * \author Francois TABURET
  * \date 2017
  * \version 0.1
@@ -37,260 +37,183 @@
 #include <errno.h>
 #include <platform_types.h>
 #include "config_userapi.h"
-#include "../utils/LOG/log.h"
 
-int parse_stringlist(paramdef_t *cfgoptions, char *val) {
-  char *atoken;
-  char *tokctx;
-  char *tmpval=strdup(val);
-  int   numelt=0;
-  cfgoptions->numelt=0;
-  atoken=strtok_r(tmpval, ",",&tokctx);
 
-  while(atoken != NULL) {
-    numelt++ ;
-    atoken=strtok_r(NULL, ",",&tokctx);
-  }
+int parse_stringlist(paramdef_t *cfgoptions, char *val)
+{
+char *atoken;
+char *tokctx;
+char *tmpval=strdup(val);
+int   numelt=0;
 
-  free(tmpval);
-  config_check_valptr(cfgoptions,(char **)&(cfgoptions->strlistptr), sizeof(char *) * numelt);
-  cfgoptions->numelt=numelt;
-  atoken=strtok_r(val, ",",&tokctx);
+   cfgoptions->numelt=0;
 
-  for( int i=0; i<cfgoptions->numelt && atoken != NULL ; i++) {
-    config_check_valptr(cfgoptions,&(cfgoptions->strlistptr[i]),strlen(atoken)+1);
-    sprintf(cfgoptions->strlistptr[i],"%s",atoken);
-    printf_params("[LIBCONFIG] %s[%i]: %s\n", cfgoptions->optname,i,cfgoptions->strlistptr[i]);
-    atoken=strtok_r(NULL, ",",&tokctx);
-  }
+   atoken=strtok_r(tmpval, ",",&tokctx);
+   while(atoken != NULL) {
+     numelt++ ;
+     atoken=strtok_r(NULL, ",",&tokctx);
+   }
+   free(tmpval);
+   config_check_valptr(cfgoptions,(char **)&(cfgoptions->strlistptr), sizeof(char *) * numelt);
+   cfgoptions->numelt=numelt;
 
-  return (cfgoptions->numelt > 0);
+   atoken=strtok_r(val, ",",&tokctx);
+   for( int i=0; i<cfgoptions->numelt && atoken != NULL ; i++) {
+      config_check_valptr(cfgoptions,&(cfgoptions->strlistptr[i]),strlen(atoken)+1);
+      sprintf(cfgoptions->strlistptr[i],"%s",atoken);
+      printf_params("[LIBCONFIG] %s[%i]: %s\n", cfgoptions->optname,i,cfgoptions->strlistptr[i]);
+      atoken=strtok_r(NULL, ",",&tokctx);
+   }
+   return (cfgoptions->numelt > 0); 
+}
+ 
+int processoption(paramdef_t *cfgoptions, char *value)
+{
+char *tmpval = value;
+int optisset=0;
+char defbool[2]="1";
+
+     
+     if ( value == NULL) {
+        if( (cfgoptions->paramflags &PARAMFLAG_BOOL) == 0 ) { /* not a boolean, argument required */
+	    fprintf(stderr,"[CONFIG] command line, option %s requires an argument\n",cfgoptions->optname);
+	    return 0;
+        } else {        /* boolean value option without argument, set value to true*/
+            tmpval = defbool;
+        }
+     }
+     switch(cfgoptions->type)
+       {
+       	case TYPE_STRING:
+           if (cfgoptions->numelt == 0 ) {
+              config_check_valptr(cfgoptions, cfgoptions->strptr, strlen(tmpval)+1);
+              sprintf(*(cfgoptions->strptr), "%s",tmpval);
+            } else {
+              sprintf( (char *)(cfgoptions->strptr), "%s",tmpval);              
+           }
+           printf_cmdl("[CONFIG] %s set to  %s from command line\n", cfgoptions->optname, tmpval);
+	   optisset=1;
+        break;
+	
+        case TYPE_STRINGLIST:
+           optisset=parse_stringlist(cfgoptions,tmpval); 
+        break;
+        case TYPE_UINT32:
+       	case TYPE_INT32:
+        case TYPE_UINT16:
+       	case TYPE_INT16:
+	case TYPE_UINT8:
+       	case TYPE_INT8:	
+           config_check_valptr(cfgoptions, (char **)&(cfgoptions->iptr),sizeof(int32_t));
+	   config_assign_int(cfgoptions,cfgoptions->optname,(int32_t)strtol(tmpval,NULL,0));  
+	   optisset=1;
+        break;  	
+       	case TYPE_UINT64:
+       	case TYPE_INT64:
+           config_check_valptr(cfgoptions, (char **)&(cfgoptions->i64ptr),sizeof(uint64_t));
+	   *(cfgoptions->i64ptr)=strtoll(tmpval,NULL,0);  
+           printf_cmdl("[CONFIG] %s set to  %lli from command line\n", cfgoptions->optname, (long long)*(cfgoptions->i64ptr));
+	   optisset=1;
+        break;        
+       	case TYPE_UINTARRAY:
+       	case TYPE_INTARRAY:
+
+        break;
+        case TYPE_DOUBLE:
+           config_check_valptr(cfgoptions, (char **)&(cfgoptions->dblptr),sizeof(double)); 
+           *(cfgoptions->dblptr) = strtof(tmpval,NULL);  
+           printf_cmdl("[CONFIG] %s set to  %lf from command line\n", cfgoptions->optname, *(cfgoptions->dblptr));
+	   optisset=1; 
+        break; 
+
+       	case TYPE_IPV4ADDR:
+
+        break;
+
+       default:
+            fprintf(stderr,"[CONFIG] command line, %s type %i  not supported\n",cfgoptions->optname, cfgoptions->type);
+       break;
+       } /* switch on param type */
+       if (optisset == 1) {
+          cfgoptions->paramflags = cfgoptions->paramflags |  PARAMFLAG_PARAMSET;
+       }
+    return optisset;
 }
 
-int processoption(paramdef_t *cfgoptions, char *value) {
-  char *tmpval = value;
-  int optisset=0;
-  char defbool[2]="1";
-
-  if ( value == NULL) {
-    if( (cfgoptions->paramflags &PARAMFLAG_BOOL) == 0 ) { /* not a boolean, argument required */
-      CONFIG_PRINTF_ERROR("[CONFIG] command line, option %s requires an argument\n",cfgoptions->optname);
-    } else {        /* boolean value option without argument, set value to true*/
-      tmpval = defbool;
-    }
-  }
-
-  switch(cfgoptions->type) {
-      char *charptr;
-
-    case TYPE_STRING:
-      if (cfgoptions->numelt == 0 ) {
-        config_check_valptr(cfgoptions, cfgoptions->strptr, strlen(tmpval)+1);
-        sprintf(*(cfgoptions->strptr), "%s",tmpval);
-      } else {
-        sprintf( (char *)(cfgoptions->strptr), "%s",tmpval);
-      }
-
-      printf_cmdl("[CONFIG] %s set to  %s from command line\n", cfgoptions->optname, tmpval);
-      optisset=1;
-      break;
-
-    case TYPE_STRINGLIST:
-      optisset=parse_stringlist(cfgoptions,tmpval);
-      break;
-
-    case TYPE_UINT32:
-    case TYPE_INT32:
-    case TYPE_UINT16:
-    case TYPE_INT16:
-    case TYPE_UINT8:
-    case TYPE_INT8:
-      config_check_valptr(cfgoptions, (char **)&(cfgoptions->iptr),sizeof(int32_t));
-      config_assign_int(cfgoptions,cfgoptions->optname,(int32_t)strtol(tmpval,&charptr,0));
-
-      if( *charptr != 0) {
-        CONFIG_PRINTF_ERROR("[CONFIG] command line, option %s requires an integer argument\n",cfgoptions->optname);
-      }
-
-      optisset=1;
-      break;
-
-    case TYPE_UINT64:
-    case TYPE_INT64:
-      config_check_valptr(cfgoptions, (char **)&(cfgoptions->i64ptr),sizeof(uint64_t));
-      *(cfgoptions->i64ptr)=strtoll(tmpval,&charptr,0);
-
-      if( *charptr != 0) {
-        CONFIG_PRINTF_ERROR("[CONFIG] command line, option %s requires an integer argument\n",cfgoptions->optname);
-      }
-
-      printf_cmdl("[CONFIG] %s set to  %lli from command line\n", cfgoptions->optname, (long long)*(cfgoptions->i64ptr));
-      optisset=1;
-      break;
-
-    case TYPE_UINTARRAY:
-    case TYPE_INTARRAY:
-      break;
-
-    case TYPE_DOUBLE:
-      config_check_valptr(cfgoptions, (char **)&(cfgoptions->dblptr),sizeof(double));
-      *(cfgoptions->dblptr) = strtof(tmpval,&charptr);
-
-      if( *charptr != 0) {
-        CONFIG_PRINTF_ERROR("[CONFIG] command line, option %s requires a double argument\n",cfgoptions->optname);
-      }
-
-      printf_cmdl("[CONFIG] %s set to  %lf from command line\n", cfgoptions->optname, *(cfgoptions->dblptr));
-      optisset=1;
-      break;
-
-    case TYPE_IPV4ADDR:
-      break;
-
-    default:
-      CONFIG_PRINTF_ERROR("[CONFIG] command line, %s type %i  not supported\n",cfgoptions->optname, cfgoptions->type);
-      break;
-  } /* switch on param type */
-
-  if (optisset == 1) {
-    cfgoptions->paramflags = cfgoptions->paramflags |  PARAMFLAG_PARAMSET;
-  }
-
-  return optisset;
-}
-
-/*--------------------------------------------------------------------*/
-/*  check unknown options in the command line
-*/
-int config_check_unknown_cmdlineopt(char *prefix) {
-  int unknowndetected=0;
-  char testprefix[CONFIG_MAXOPTLENGTH];
-  int finalcheck = 0;
-  memset(testprefix,0,sizeof(testprefix));
-
-  memset(testprefix,0,sizeof(testprefix));
-  if (prefix != NULL) {
-    if (strcmp(prefix,CONFIG_CHECKALLSECTIONS) == 0)
-      finalcheck = 1;
-    else if (strlen(prefix) > 0) {
-      sprintf(testprefix,"--%.*s.",CONFIG_MAXOPTLENGTH-4,prefix);
-    }
-  }
-
-  for (int i=1; i<config_get_if()->argc ; i++) {
-    if ( !finalcheck && strstr(config_get_if()->argv[i],testprefix) == NULL ) continue;
-
-    if ( !finalcheck && testprefix[0]==0 && index(config_get_if()->argv[i],'.') != NULL) continue;
-
-    if ( !finalcheck && isdigit(config_get_if()->argv[i][0])) continue;
-
-    if ( !finalcheck && config_get_if()->argv[i][0] == '-' && isdigit(config_get_if()->argv[i][1])) continue;
-
-    if ( (config_get_if()->argv_info[i] & CONFIG_CMDLINEOPT_PROCESSED) == 0 ) {
-      fprintf(stderr,"[CONFIG] unknown option: %s\n",
-              config_get_if()->argv[i] );
-      unknowndetected++;
-    }
-  }
-
-  if (unknowndetected > 0) {
-    CONFIG_PRINTF_ERROR("[CONFIG] %i unknown option(s) in command line starting with %s (section %s)\n",
-                        unknowndetected,testprefix,((prefix==NULL)?"":prefix));
-  }
-
-  return unknowndetected;
-}  /* config_check_unknown_cmdlineopt */
-
-int config_process_cmdline(paramdef_t *cfgoptions,int numoptions, char *prefix) {
+int config_process_cmdline(paramdef_t *cfgoptions,int numoptions, char *prefix)
+{
   int c = config_get_if()->argc;
   int i,j;
   char *pp;
-  char cfgpath[CONFIG_MAXOPTLENGTH];
+  char cfgpath[512]; /* 512 should be enough for the sprintf below */
+ 
   j = 0;
   i = 0;
-
-  while (c > 0 ) {
-    char *oneargv = strdup(config_get_if()->argv[i]);          /* we use strtok_r which modifies its string paramater, and we don't want argv to be modified */
-
-    /* first check help options, either --help, -h or --help_<section> */
-    if (strncmp(oneargv, "-h",2) == 0 || strncmp(oneargv, "--help",6) == 0 ) {
-      char *tokctx;
-      pp=strtok_r(oneargv, "_",&tokctx);
-      config_get_if()->argv_info[i] |= CONFIG_CMDLINEOPT_PROCESSED;
-
-      if (pp == NULL || strcasecmp(pp,config_get_if()->argv[i] ) == 0 ) {
-        if( prefix == NULL) {
-          config_printhelp(cfgoptions,numoptions,"(root section)");
-
-          if ( ! ( CONFIG_ISFLAGSET(CONFIG_NOEXITONHELP)))
-            exit_fun("[CONFIG] Exiting after displaying help\n");
-        }
-      } else {
-        pp=strtok_r(NULL, " ",&tokctx);
-
-        if ( prefix != NULL && pp != NULL && strncasecmp(prefix,pp,strlen(pp)) == 0 ) {
-          config_printhelp(cfgoptions,numoptions,prefix);
-
-          if ( ! (CONFIG_ISFLAGSET(CONFIG_NOEXITONHELP))) {
-            fprintf(stderr,"[CONFIG] %s %i section %s:", __FILE__, __LINE__, prefix);
-            exit_fun(" Exiting after displaying help\n");
-          }
-        }
-      }
-    }
-
-    /* now, check for non help options */
-    if (oneargv[0] == '-') {
-      for(int n=0; n<numoptions; n++) {
-        if ( ( cfgoptions[n].paramflags & PARAMFLAG_DISABLECMDLINE) != 0) {
-          continue;
+    while (c > 0 ) {
+        char *oneargv = strdup(config_get_if()->argv[i]);          /* we use strtok_r which modifies its string paramater, and we don't want argv to be modified */
+        /* first check help options, either --help, -h or --help_<section> */
+        if (strncmp(oneargv, "-h",2) == 0 || strncmp(oneargv, "--help",6) == 0 ) {
+            char *tokctx;
+            pp=strtok_r(oneargv, "_",&tokctx);
+            if (pp == NULL || strcasecmp(pp,config_get_if()->argv[i] ) == 0 ) {
+                if( prefix == NULL) {
+                  config_printhelp(cfgoptions,numoptions);
+                  if ( ! ( CONFIG_ISFLAGSET(CONFIG_NOEXITONHELP)))
+                     exit_fun("[CONFIG] Exiting after displaying help\n");
+                }
+            } else {
+                pp=strtok_r(NULL, " ",&tokctx);
+                if ( prefix != NULL && pp != NULL && strncasecmp(prefix,pp,strlen(pp)) == 0 ) { 
+                   printf ("Help for %s section:\n",prefix);               
+                   config_printhelp(cfgoptions,numoptions);
+                   if ( ! (CONFIG_ISFLAGSET(CONFIG_NOEXITONHELP))) {
+                      fprintf(stderr,"[CONFIG] %s %i section %s:", __FILE__, __LINE__, prefix);
+                      exit_fun(" Exiting after displaying help\n");
+                   }
+                }
+            } 
         }
 
-        if (prefix != NULL) {
-          sprintf(cfgpath,"%s.%s",prefix,cfgoptions[n].optname);
-        } else {
-          sprintf(cfgpath,"%s",cfgoptions[n].optname);
-        }
-
-        if ( ((strlen(oneargv) == 2) && (strcmp(oneargv + 1,cfgpath) == 0))  || /* short option, one "-" */
-             ((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 )) ) {
-          char *valptr=NULL;
-          int ret;
-          config_get_if()->argv_info[i] |= CONFIG_CMDLINEOPT_PROCESSED;
-
-          if (c > 0) {
-            pp = config_get_if()->argv[i+1];
-
-            if (pp != NULL ) {
-              ret = strlen(pp);
-
-              if (ret > 0 ) {
-                if (pp[0] != '-')
-                  valptr=pp;
-                else if ( ret > 1 && pp[0] == '-' && isdigit(pp[1]) )
-                  valptr=pp;
-              }
-            }
-          }
-
-          j += processoption(&(cfgoptions[n]), valptr);
-
-          if (  valptr != NULL ) {
-            i++;
-            config_get_if()->argv_info[i] |= CONFIG_CMDLINEOPT_PROCESSED;
-            c--;
-          }
-
-          break;
-        }
-      } /* for n... */
-    } /* if (oneargv[0] == '-') */
-
-    free(oneargv);
-    i++;
-    c--;
-  }   /* fin du while */
-
+        /* now, check for non help options */
+        if (oneargv[0] == '-') {        
+    	    for(int n=0;n<numoptions;n++) {
+    		if ( ( cfgoptions[n].paramflags & PARAMFLAG_DISABLECMDLINE) != 0) {
+    		  continue;
+    		 }
+    		if (prefix != NULL) {
+    		   sprintf(cfgpath,"%s.%s",prefix,cfgoptions[n].optname);
+    		} else {
+    		   sprintf(cfgpath,"%s",cfgoptions[n].optname);
+    		}
+    		if ( ((strlen(oneargv) == 2) && (strcmp(oneargv + 1,cfgpath) == 0))  || /* short option, one "-" */
+    		     ((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 )) ) {
+                   char *valptr=NULL;
+                   int ret;
+                   if (c > 0) {
+    		      pp = config_get_if()->argv[i+1];
+                      if (pp != NULL ) {                      
+                         ret = strlen(pp);
+                         if (ret > 0 ) {
+                             if (pp[0] != '-')
+                                valptr=pp;
+                             else if ( ret > 1 && pp[0] == '-' && isdigit(pp[1]) )
+                                valptr=pp;
+                         }
+                     }
+                   }
+                   j += processoption(&(cfgoptions[n]), valptr);
+    		   if (  valptr != NULL ) {
+                      i++;
+                      c--;
+    		   } 
+                   break;
+    		}
+    	     } /* for n... */
+         } /* if (oneargv[0] == '-') */  	     
+         free(oneargv);
+         i++;
+         c--;  
+    }   /* fin du while */
   printf_cmdl("[CONFIG] %s %i options set from command line\n",((prefix == NULL) ? "(root)":prefix),j);
-  return j;
+  return j;            
 }  /* parse_cmdline*/

common/config/config_load_configmodule.c

@@ -20,7 +20,7 @@
  */
 
 /*! \file common/config/config_load_configmodule.c
- * \brief configuration module, load the shared library implementing the configuration module
+ * \brief configuration module, load the shared library implementing the configuration module 
  * \author Francois TABURET
  * \date 2017
  * \version 0.1
@@ -36,324 +36,305 @@
 #include <unistd.h>
 #include <errno.h>
 #include <dlfcn.h>
-#include <platform_types.h>
 
 #define CONFIG_LOADCONFIG_MAIN
 #include "config_load_configmodule.h"
 #include "config_userapi.h"
-#include "../utils/LOG/log.h"
 #define CONFIG_SHAREDLIBFORMAT "libparams_%s.so"
 
+int load_config_sharedlib(configmodule_interface_t *cfgptr)
+{
+void *lib_handle;
+char fname[128];
+char libname[FILENAME_MAX]; 
+int st;
 
-int load_config_sharedlib(configmodule_interface_t *cfgptr) {
-  void *lib_handle;
-  char fname[128];
-  char libname[FILENAME_MAX];
-  int st;
-  st=0;
-  sprintf(libname,CONFIG_SHAREDLIBFORMAT,cfgptr->cfgmode);
-  lib_handle = dlopen(libname,RTLD_NOW | RTLD_GLOBAL | RTLD_NODELETE);
+   st=0;  
+   sprintf(libname,CONFIG_SHAREDLIBFORMAT,cfgptr->cfgmode);
 
-  if (!lib_handle) {
-    fprintf(stderr,"[CONFIG] %s %d Error calling dlopen(%s): %s\n",__FILE__, __LINE__, libname,dlerror());
-    st = -1;
-  } else {
-    sprintf (fname,"config_%s_init",cfgptr->cfgmode);
-    cfgptr->init = dlsym(lib_handle,fname);
-
-    if (cfgptr->init == NULL ) {
-      printf("[CONFIG] %s %d no function %s for config mode %s\n",
-             __FILE__, __LINE__,fname, cfgptr->cfgmode);
-    } else {
-      st=cfgptr->init(cfgptr->cfgP,cfgptr->num_cfgP);
-      printf("[CONFIG] function %s returned %i\n",
-             fname, st);
-    }
-
-    sprintf (fname,"config_%s_get",cfgptr->cfgmode);
-    cfgptr->get = dlsym(lib_handle,fname);
-
-    if (cfgptr->get == NULL ) {
-      printf("[CONFIG] %s %d no function %s for config mode %s\n",
-             __FILE__, __LINE__,fname, cfgptr->cfgmode);
+   lib_handle = dlopen(libname,RTLD_NOW | RTLD_GLOBAL | RTLD_NODELETE);
+   if (!lib_handle) {
+      fprintf(stderr,"[CONFIG] %s %d Error calling dlopen(%s): %s\n",__FILE__, __LINE__, libname,dlerror());
       st = -1;
-    }
+   } else { 
+      sprintf (fname,"config_%s_init",cfgptr->cfgmode);
+      cfgptr->init = dlsym(lib_handle,fname);
 
-    sprintf (fname,"config_%s_getlist",cfgptr->cfgmode);
-    cfgptr->getlist = dlsym(lib_handle,fname);
+      if (cfgptr->init == NULL ) {
+         printf("[CONFIG] %s %d no function %s for config mode %s\n",
+               __FILE__, __LINE__,fname, cfgptr->cfgmode);
+      } else {
+         st=cfgptr->init(cfgptr->cfgP,cfgptr->num_cfgP); 
+         printf("[CONFIG] function %s returned %i\n",
+               fname, st);	 
+      }
 
-    if (cfgptr->getlist == NULL ) {
-      printf("[CONFIG] %s %d no function %s for config mode %s\n",
-             __FILE__, __LINE__,fname, cfgptr->cfgmode);
-      st = -1;
-    }
+      sprintf (fname,"config_%s_get",cfgptr->cfgmode);
+      cfgptr->get = dlsym(lib_handle,fname);
+      if (cfgptr->get == NULL ) { 
+         printf("[CONFIG] %s %d no function %s for config mode %s\n",
+               __FILE__, __LINE__,fname, cfgptr->cfgmode);
+	 st = -1;
+      }
+      
+      sprintf (fname,"config_%s_getlist",cfgptr->cfgmode);
+      cfgptr->getlist = dlsym(lib_handle,fname);
+      if (cfgptr->getlist == NULL ) { 
+         printf("[CONFIG] %s %d no function %s for config mode %s\n",
+               __FILE__, __LINE__,fname, cfgptr->cfgmode);
+	 st = -1;
+      }
 
-    sprintf (fname,"config_%s_end",cfgptr->cfgmode);
-    cfgptr->end = dlsym(lib_handle,fname);
-
-    if (cfgptr->getlist == NULL ) {
-      printf("[CONFIG] %s %d no function %s for config mode %s\n",
-             __FILE__, __LINE__,fname, cfgptr->cfgmode);
-    }
-  }
-
-  return st;
+      sprintf (fname,"config_%s_end",cfgptr->cfgmode);
+      cfgptr->end = dlsym(lib_handle,fname);
+      if (cfgptr->getlist == NULL ) { 
+         printf("[CONFIG] %s %d no function %s for config mode %s\n",
+               __FILE__, __LINE__,fname, cfgptr->cfgmode);
+      }      
+   } 
+   
+   return st;	       
 }
 /*-----------------------------------------------------------------------------------*/
 /* from here: interface implementtion of the configuration module */
 int nooptfunc(void) {
-  return 0;
+   return 0;
 };
 
-int config_cmdlineonly_getlist(paramlist_def_t *ParamList,
-                               paramdef_t *params, int numparams, char *prefix) {
-  ParamList->numelt = 0;
-  return 0;
+int config_cmdlineonly_getlist(paramlist_def_t *ParamList, 
+                                   paramdef_t *params, int numparams, char *prefix)
+{
+     ParamList->numelt = 0;
+     return 0;
 }
 
 
-int config_cmdlineonly_get(paramdef_t *cfgoptions,int numoptions, char *prefix ) {
+int config_cmdlineonly_get(paramdef_t *cfgoptions,int numoptions, char *prefix )
+{
   int defval;
   int fatalerror=0;
   int numdefvals=0;
+  
 
-  for(int i=0; i<numoptions; i++) {
-    defval=0;
-
-    switch(cfgoptions[i].type) {
-      case TYPE_STRING:
-        defval=config_setdefault_string(&(cfgoptions[i]), prefix);
+  for(int i=0;i<numoptions;i++) {
+     defval=0;
+     switch(cfgoptions[i].type) {
+       case TYPE_STRING:
+            defval=config_setdefault_string(&(cfgoptions[i]), prefix);
+       break;
+       case TYPE_STRINGLIST:
+            defval=config_setdefault_stringlist(&(cfgoptions[i]), prefix);
+       break;
+       	case TYPE_UINT8:
+       	case TYPE_INT8:	
+       	case TYPE_UINT16:
+       	case TYPE_INT16:
+       	case TYPE_UINT32:
+       	case TYPE_INT32:
+       	case TYPE_MASK:	
+             defval=config_setdefault_int(&(cfgoptions[i]), prefix);
         break;
-
-      case TYPE_STRINGLIST:
-        defval=config_setdefault_stringlist(&(cfgoptions[i]), prefix);
+       	case TYPE_UINT64:
+       	case TYPE_INT64:
+             defval=config_setdefault_int64(&(cfgoptions[i]), prefix);
+        break;        
+       	case TYPE_UINTARRAY:
+       	case TYPE_INTARRAY:
+             defval=config_setdefault_intlist(&(cfgoptions[i]), prefix);
         break;
-
-      case TYPE_UINT8:
-      case TYPE_INT8:
-      case TYPE_UINT16:
-      case TYPE_INT16:
-      case TYPE_UINT32:
-      case TYPE_INT32:
-      case TYPE_MASK:
-        defval=config_setdefault_int(&(cfgoptions[i]), prefix);
+       	case TYPE_DOUBLE:
+             defval=config_setdefault_double(&(cfgoptions[i]), prefix);  
+        break;  
+       	case TYPE_IPV4ADDR:
+             defval=config_setdefault_ipv4addr(&(cfgoptions[i]), prefix); 
+              
         break;
-
-      case TYPE_UINT64:
-      case TYPE_INT64:
-        defval=config_setdefault_int64(&(cfgoptions[i]), prefix);
+        default:
+            fprintf(stderr,"[CONFIG] %s.%s type %i  not supported\n",prefix, cfgoptions[i].optname,cfgoptions[i].type);
+            fatalerror=1;
         break;
-
-      case TYPE_UINTARRAY:
-      case TYPE_INTARRAY:
-        defval=config_setdefault_intlist(&(cfgoptions[i]), prefix);
-        break;
-
-      case TYPE_DOUBLE:
-        defval=config_setdefault_double(&(cfgoptions[i]), prefix);
-        break;
-
-      case TYPE_IPV4ADDR:
-        defval=config_setdefault_ipv4addr(&(cfgoptions[i]), prefix);
-        break;
-
-      default:
-        fprintf(stderr,"[CONFIG] %s.%s type %i  not supported\n",prefix, cfgoptions[i].optname,cfgoptions[i].type);
-        fatalerror=1;
-        break;
-    } /* switch on param type */
-
+      } /* switch on param type */
     if (defval == 1) {
-      numdefvals++;
-      cfgoptions[i].paramflags = cfgoptions[i].paramflags |  PARAMFLAG_PARAMSETDEF;
+    	numdefvals++;
+        cfgoptions[i].paramflags = cfgoptions[i].paramflags |  PARAMFLAG_PARAMSETDEF;
     }
   } /* for loop on options */
-
   printf("[CONFIG] %s: %i/%i parameters successfully set \n",
-         ((prefix == NULL)?"(root)":prefix),
+         ((prefix == NULL)?"(root)":prefix), 
          numdefvals,numoptions );
-
   if (fatalerror == 1) {
-    fprintf(stderr,"[CONFIG] fatal errors found when assigning %s parameters \n",
-            prefix);
+      fprintf(stderr,"[CONFIG] fatal errors found when assigning %s parameters \n",
+             prefix);
   }
-
   return numdefvals;
 }
 
-configmodule_interface_t *load_configmodule(int argc, char **argv, uint32_t initflags) {
-  char *cfgparam=NULL;
-  char *modeparams=NULL;
-  char *cfgmode=NULL;
-  char *strtokctx=NULL;
-  char *atoken;
-  uint32_t tmpflags=0;
-  int i;
-  int OoptIdx=-1;
+configmodule_interface_t *load_configmodule(int argc, char **argv)
+{
+char *cfgparam=NULL;
+char *modeparams=NULL;
+char *cfgmode=NULL;
+char *strtokctx=NULL;
+char *atoken;
+uint32_t tmpflags=0;
+int i;
+ 
+/* first parse the command line to look for the -O option */
+  for (i = 0;i<argc;i++) {
+       if (strlen(argv[i]) < 2) continue;
+       if ( argv[i][1] == 'O' && i < (argc -1)) {
+          cfgparam = argv[i+1]; 
+       } 
+       if ( strstr(argv[i], "help_config") != NULL  ) {
+          config_printhelp(Config_Params,CONFIG_PARAMLENGTH(Config_Params));
+          exit(0);
+       }
+       if ( (strcmp(argv[i]+1, "h") == 0) || (strstr(argv[i]+1, "help_") != NULL ) ) {
+          tmpflags = CONFIG_HELP; 
+       }            
+   }
 
-  /* first parse the command line to look for the -O option */
-  for (i = 0; i<argc; i++) {
-    if (strlen(argv[i]) < 2) continue;
-
-    if ( argv[i][1] == 'O' && i < (argc -1)) {
-      cfgparam = argv[i+1];
-      OoptIdx=i;
-    }
-
-    if ( strstr(argv[i], "help_config") != NULL  ) {
-      config_printhelp(Config_Params,CONFIG_PARAMLENGTH(Config_Params),CONFIG_SECTIONNAME);
-      exit(0);
-    }
-
-    if ( (strcmp(argv[i]+1, "h") == 0) || (strstr(argv[i]+1, "help_") != NULL ) ) {
-      tmpflags = CONFIG_HELP;
-    }
-  }
-
-  /* look for the OAI_CONFIGMODULE environement variable */
+/* look for the OAI_CONFIGMODULE environement variable */
   if ( cfgparam == NULL ) {
-    cfgparam = getenv("OAI_CONFIGMODULE");
-  }
+     cfgparam = getenv("OAI_CONFIGMODULE");
+     }
 
-  /* default different for UE and softmodem because UE doesn't use config file*/
-  /* and -O option is not mandatory for UE                                    */
-  /* phy simulators behave as UE                                              */
-  /* test of exec name would better be replaced by a parameter to the l       */
-  /* oad_configmodule function */
+/* default */
   if (cfgparam == NULL) {
-    tmpflags = tmpflags | CONFIG_NOOOPT;
+         tmpflags = tmpflags | CONFIG_NOOOPT;
+     if (strstr(argv[0],"uesoftmodem") == NULL) {
+         cfgparam = CONFIG_LIBCONFIGFILE ":" DEFAULT_CFGFILENAME;
+      } else {
+         cfgparam = CONFIG_CMDLINEONLY ":dbgl0" ;         
+      }
+   }
+   
+/* parse the config parameters to set the config source */
+   i = sscanf(cfgparam,"%m[^':']:%ms",&cfgmode,&modeparams);
+   if (i< 0) {
+       fprintf(stderr,"[CONFIG] %s, %d, sscanf error parsing config source  %s: %s\n", __FILE__, __LINE__,cfgparam, strerror(errno));
+       exit(-1);
+   }
+   else if ( i == 1 ) {
+  /* -O argument doesn't contain ":" separator, assume -O <conf file> option, default cfgmode to libconfig
+     with one parameter, the path to the configuration file */
+       modeparams=cfgmode;
+       cfgmode=strdup(CONFIG_LIBCONFIGFILE);
+   }
 
-    if ( initflags &  CONFIG_ENABLECMDLINEONLY) {
-      cfgparam = CONFIG_CMDLINEONLY ":dbgl0" ;
-    } else {
-      cfgparam = CONFIG_CMDLINEONLY ":dbgl0" ;
-      cfgparam = CONFIG_LIBCONFIGFILE ":" DEFAULT_CFGFILENAME;
-    }
-  }
+   cfgptr = malloc(sizeof(configmodule_interface_t));
+   memset(cfgptr,0,sizeof(configmodule_interface_t));
 
-  /* parse the config parameters to set the config source */
-  i = sscanf(cfgparam,"%m[^':']:%ms",&cfgmode,&modeparams);
+   cfgptr->rtflags = cfgptr->rtflags | tmpflags;
+   cfgptr->argc   = argc;
+   cfgptr->argv   = argv; 
+   cfgptr->cfgmode=strdup(cfgmode);
+   cfgptr->num_cfgP=0;
+   atoken=strtok_r(modeparams,":",&strtokctx);     
+   while ( cfgptr->num_cfgP< CONFIG_MAX_OOPT_PARAMS && atoken != NULL) {
+       /* look for debug level in the config parameters, it is commom to all config mode 
+          and will be removed frome the parameter array passed to the shared module */
+       char *aptr;
+       aptr=strcasestr(atoken,"dbgl");
+       if (aptr != NULL) {
+           cfgptr->rtflags = cfgptr->rtflags | strtol(aptr+4,NULL,0);
 
-  if (i< 0) {
-    fprintf(stderr,"[CONFIG] %s, %d, sscanf error parsing config source  %s: %s\n", __FILE__, __LINE__,cfgparam, strerror(errno));
-    exit(-1) ;
-  } else if ( i == 1 ) {
-    /* -O argument doesn't contain ":" separator, assume -O <conf file> option, default cfgmode to libconfig
-       with one parameter, the path to the configuration file cfgmode must not be NULL */
-    modeparams=cfgmode;
-    cfgmode=strdup(CONFIG_LIBCONFIGFILE);
-  }
+       } else {
+           cfgptr->cfgP[cfgptr->num_cfgP] = strdup(atoken);
+           cfgptr->num_cfgP++;
+       }
+       atoken = strtok_r(NULL,":",&strtokctx);
+   }
 
-  cfgptr = calloc(sizeof(configmodule_interface_t),1);
-  cfgptr->argv_info = calloc(sizeof(int32_t), argc);
-  cfgptr->argv_info[0] |= CONFIG_CMDLINEOPT_PROCESSED;
+   
+   printf("[CONFIG] get parameters from %s ",cfgmode);
 
-  if (OoptIdx >= 0) {
-    cfgptr->argv_info[OoptIdx] |= CONFIG_CMDLINEOPT_PROCESSED;
-    cfgptr->argv_info[OoptIdx+1] |= CONFIG_CMDLINEOPT_PROCESSED;
-  }
 
-  cfgptr->rtflags = cfgptr->rtflags | tmpflags;
-  cfgptr->argc   = argc;
-  cfgptr->argv   = argv;
-  cfgptr->cfgmode=strdup(cfgmode);
-  cfgptr->num_cfgP=0;
-  atoken=strtok_r(modeparams,":",&strtokctx);
+		
+   for (i=0;i<cfgptr->num_cfgP; i++) {
+   printf("%s ",cfgptr->cfgP[i]); 
+   }
+   printf(", debug flags: 0x%08x\n",cfgptr->rtflags);
 
-  while ( cfgptr->num_cfgP< CONFIG_MAX_OOPT_PARAMS && atoken != NULL) {
-    /* look for debug level in the config parameters, it is commom to all config mode
-       and will be removed frome the parameter array passed to the shared module */
-    char *aptr;
-    aptr=strcasestr(atoken,"dbgl");
+   if (strstr(cfgparam,CONFIG_CMDLINEONLY) == NULL) {
+      i=load_config_sharedlib(cfgptr);
+      if (i ==  0) {
+         printf("[CONFIG] config module %s loaded\n",cfgmode);
+         Config_Params[CONFIGPARAM_DEBUGFLAGS_IDX].uptr=&(cfgptr->rtflags);
+         config_get(Config_Params,CONFIG_PARAMLENGTH(Config_Params), CONFIG_SECTIONNAME );
+      } else {
+         fprintf(stderr,"[CONFIG] %s %d config module \"%s\" couldn't be loaded\n", __FILE__, __LINE__,cfgmode);
+         cfgptr->rtflags = cfgptr->rtflags | CONFIG_HELP | CONFIG_ABORT;
+      } 
+   } else {
+      cfgptr->init = (configmodule_initfunc_t)nooptfunc;
+      cfgptr->get = config_cmdlineonly_get;
+      cfgptr->getlist = config_cmdlineonly_getlist;
+      cfgptr->end = (configmodule_endfunc_t)nooptfunc;
+   }
 
-    if (aptr != NULL) {
-      cfgptr->rtflags = cfgptr->rtflags | strtol(aptr+4,NULL,0);
-    } else {
-      cfgptr->cfgP[cfgptr->num_cfgP] = strdup(atoken);
-      cfgptr->num_cfgP++;
-    }
-
-    atoken = strtok_r(NULL,":",&strtokctx);
-  }
-
-  printf("[CONFIG] get parameters from %s ",cfgmode);
-
-  for (i=0; i<cfgptr->num_cfgP; i++) {
-    printf("%s ",cfgptr->cfgP[i]);
-  }
-
-  printf(", debug flags: 0x%08x\n",cfgptr->rtflags);
-
-  if (strstr(cfgparam,CONFIG_CMDLINEONLY) == NULL) {
-    i=load_config_sharedlib(cfgptr);
-
-    if (i ==  0) {
-      printf("[CONFIG] config module %s loaded\n",cfgmode);
-      Config_Params[CONFIGPARAM_DEBUGFLAGS_IDX].uptr=&(cfgptr->rtflags);
-      config_get(Config_Params,CONFIG_PARAMLENGTH(Config_Params), CONFIG_SECTIONNAME );
-    } else {
-      fprintf(stderr,"[CONFIG] %s %d config module \"%s\" couldn't be loaded\n", __FILE__, __LINE__,cfgmode);
-      cfgptr->rtflags = cfgptr->rtflags | CONFIG_HELP | CONFIG_ABORT;
-    }
-  } else {
-    cfgptr->init = (configmodule_initfunc_t)nooptfunc;
-    cfgptr->get = config_cmdlineonly_get;
-    cfgptr->getlist = config_cmdlineonly_getlist;
-    cfgptr->end = (configmodule_endfunc_t)nooptfunc;
-  }
-
-  if (modeparams != NULL) free(modeparams);
-
-  if (cfgmode != NULL) free(cfgmode);
-
-  if (CONFIG_ISFLAGSET(CONFIG_ABORT)) {
-    config_printhelp(Config_Params,CONFIG_PARAMLENGTH(Config_Params),CONFIG_SECTIONNAME );
-    //       exit(-1);
-  }
-
-  return cfgptr;
+	/*
+	//(IRTBL_start) just debugging tests
+	printf("\x1B[32m");
+	printf("\n\n\n[IRTBL] Function called *load_configmodule in config_load_configmodule.c\n\n\n");
+	printf("\x1B[0m");
+	//getchar();
+	printf("[IRTBL] Trying to terminate oaisim\n");
+	system("sudo killall oaisim_nos1");
+	//(IRTBL_end) just debugging tests
+        */
+   
+   
+   if (modeparams != NULL) free(modeparams);
+   if (cfgmode != NULL) free(cfgmode);
+   if (CONFIG_ISFLAGSET(CONFIG_ABORT)) {
+       config_printhelp(Config_Params,CONFIG_PARAMLENGTH(Config_Params));
+//       exit(-1);   
+   }
+   return cfgptr;
 }
 
 
 /* free memory allocated when reading parameters */
 /* config module could be initialized again after this call */
-void end_configmodule(void) {
+void end_configmodule(void)
+{ 
   if (cfgptr != NULL) {
-    if (cfgptr->end != NULL) {
-      printf ("[CONFIG] calling config module end function...\n");
-      cfgptr->end();
-    }
-
-    printf ("[CONFIG] free %u config value pointers\n",cfgptr->numptrs);
-
-    for(int i=0; i<cfgptr->numptrs ; i++) {
-      if (cfgptr->ptrs[i] != NULL) {
-        free(cfgptr->ptrs[i]);
-        cfgptr->ptrs[i]=NULL;
+      if (cfgptr->end != NULL) {
+         printf ("[CONFIG] calling config module end function...\n"); 
+         cfgptr->end();
       }
-    }
 
-    cfgptr->numptrs=0;
+      printf ("[CONFIG] free %u config value pointers\n",cfgptr->numptrs);  
+      for(int i=0; i<cfgptr->numptrs ; i++) {
+          if (cfgptr->ptrs[i] != NULL) {
+             free(cfgptr->ptrs[i]);
+             cfgptr->ptrs[i]=NULL;
+          }
+      }
+      cfgptr->numptrs=0;
   }
 }
 
 /* free all memory used by config module */
 /* should be called only at program exit */
-void free_configmodule(void) {
+void free_configmodule(void)
+{ 
   if (cfgptr != NULL) {
-    end_configmodule();
+      end_configmodule();
+      if( cfgptr->cfgmode != NULL) free(cfgptr->cfgmode);
+      printf ("[CONFIG] free %u config parameter pointers\n",cfgptr->num_cfgP);  
+      for (int i=0; i<cfgptr->num_cfgP; i++) {
+          if ( cfgptr->cfgP[i] != NULL) free(cfgptr->cfgP[i]);
+          }
 
-    if( cfgptr->cfgmode != NULL) free(cfgptr->cfgmode);
 
-    printf ("[CONFIG] free %i config parameter pointers\n",cfgptr->num_cfgP);
-
-    for (int i=0; i<cfgptr->num_cfgP; i++) {
-      if ( cfgptr->cfgP[i] != NULL) free(cfgptr->cfgP[i]);
-    }
-
-    free(cfgptr);
-    cfgptr=NULL;
+  free(cfgptr);
+  cfgptr=NULL;
   }
+   
+
+   
 }
 
 

common/config/config_load_configmodule.h

@@ -20,8 +20,8 @@
  */
 
 /*! \file common/config/config_load_configmodule.h
- * \brief: configuration module, include file to be used by the source code calling the
- *  configuration module initialization
+ * \brief: configuration module, include file to be used by the source code calling the 
+ *  configuration module initialization 
  * \author Francois TABURET
  * \date 2017
  * \version 0.1
@@ -31,13 +31,12 @@
  * \warning
  */
 #ifndef INCLUDE_CONFIG_LOADCONFIGMODULE_H
-#define INCLUDE_CONFIG_LOADCONFIGMODULE_H
+#define INCLUDE_CONFIG_LOADCONFIGMODULE_H 
 
 
 #include <string.h>
 #include <stdlib.h>
 #include "common/config/config_paramdesc.h"
-#include "common/utils/T/T.h"
 #define CONFIG_MAX_OOPT_PARAMS    10     // maximum number of parameters in the -O option (-O <cfgmode>:P1:P2...
 #define CONFIG_MAX_ALLOCATEDPTRS  1024   // maximum number of parameters that can be dynamicaly allocated in the config module
 
@@ -45,13 +44,12 @@
 #define CONFIG_LIBCONFIGFILE        "libconfig"  // use libconfig file
 #define CONFIG_CMDLINEONLY          "cmdline"    // use only command line options
 #define DEFAULT_CFGFILENAME         "oai.conf"   // default config file
-/*   bit position definition for the argv_info mask of the configmodule_interface_t structure */
-#define CONFIG_CMDLINEOPT_PROCESSED    (1<<0)   // command line option has been processed
-/*  bit position definitions for the rtflags mask of the configmodule_interface_t structure*/
+
+/* rtflags bit position definitions */
 #define CONFIG_PRINTPARAMS    1                 // print parameters values while processing
 #define CONFIG_DEBUGPTR       (1<<1)            // print memory allocation/free debug messages
 #define CONFIG_DEBUGCMDLINE   (1<<2)            // print command line processing messages
-#define CONFIG_NOABORTONCHKF  (1<<4)            // disable abort execution when parameter checking function fails
+#define CONFIG_NOABORTONCHKF  (1<<3)            // disable abort execution when parameter checking function fails
 #define CONFIG_NOEXITONHELP   (1<<19)           // do not exit after printing help
 #define CONFIG_HELP           (1<<20)           // print help message
 #define CONFIG_ABORT          (1<<21)           // config failed,abort execution 
@@ -60,10 +58,10 @@ typedef int(*configmodule_initfunc_t)(char *cfgP[],int numP);
 typedef int(*configmodule_getfunc_t)(paramdef_t *,int numparams, char *prefix);
 typedef int(*configmodule_getlistfunc_t)(paramlist_def_t *, paramdef_t *,int numparams, char *prefix);
 typedef void(*configmodule_endfunc_t)(void);
-typedef struct configmodule_interface {
+typedef struct configmodule_interface
+{
   int      argc;
   char     **argv;
-  uint32_t *argv_info;
   char     *cfgmode;
   int      num_cfgP;
   char     *cfgP[CONFIG_MAX_OOPT_PARAMS];
@@ -73,7 +71,7 @@ typedef struct configmodule_interface {
   configmodule_endfunc_t          end;
   uint32_t numptrs;
   uint32_t rtflags;
-  char     *ptrs[CONFIG_MAX_ALLOCATEDPTRS];
+  char     *ptrs[CONFIG_MAX_ALLOCATEDPTRS];  
 } configmodule_interface_t;
 
 #ifdef CONFIG_LOADCONFIG_MAIN
@@ -83,17 +81,17 @@ static char config_helpstr [] = "\n lte-softmodem -O [config mode]<:dbgl[debugfl
           debugflags can also be defined in the config_libconfig section of the config file\n \
           debugflags: mask,    1->print parameters, 2->print memory allocations debug messages\n \
                                4->print command line processing debug messages\n ";
-
+			       
 #define CONFIG_SECTIONNAME "config"
 #define CONFIGPARAM_DEBUGFLAGS_IDX        0
 
 
 static paramdef_t Config_Params[] = {
-  /*-----------------------------------------------------------------------------------------------------------------------*/
-  /*                                            config parameters for config module                                        */
-  /*   optname              helpstr           paramflags     XXXptr       defXXXval            type       numelt           */
-  /*-----------------------------------------------------------------------------------------------------------------------*/
-  {"debugflags",            config_helpstr,   0,             uptr:NULL,   defintval:0,        TYPE_MASK,  0},
+/*-----------------------------------------------------------------------------------------------------------------------*/
+/*                                            config parameters for config module                                        */
+/*   optname              helpstr           paramflags     XXXptr       defXXXval            type       numelt           */
+/*-----------------------------------------------------------------------------------------------------------------------*/
+{"debugflags",            config_helpstr,   0,             uptr:NULL,   defintval:0,        TYPE_MASK,  0}, 
 };
 
 #else
@@ -102,13 +100,10 @@ extern configmodule_interface_t *cfgptr;
 
 
 #define printf_params(...) if ( (cfgptr->rtflags & (CONFIG_PRINTPARAMS)) != 0 )  { printf ( __VA_ARGS__ ); }
-#define printf_ptrs(...)   if ( (cfgptr->rtflags & (CONFIG_DEBUGPTR)) != 0 )     { printf ( __VA_ARGS__ ); }
+#define printf_ptrs(...)   if ( (cfgptr->rtflags & (CONFIG_DEBUGPTR)) != 0 )     { printf ( __VA_ARGS__ ); }     
 #define printf_cmdl(...)   if ( (cfgptr->rtflags & (CONFIG_DEBUGCMDLINE)) != 0 ) { printf ( __VA_ARGS__ ); }
-
-#define CONFIG_ENABLECMDLINEONLY  (1<<1)
-extern configmodule_interface_t *load_configmodule(int argc, char **argv, uint32_t initflags);
+ 
+extern configmodule_interface_t *load_configmodule(int argc, char **argv);
 extern void end_configmodule(void);
-#define CONFIG_PRINTF_ERROR(f, x... ) if (isLogInitDone ()) { LOG_E(ENB_APP,f,x);} else {printf(f,x);}; if ( !CONFIG_ISFLAGSET(CONFIG_NOABORTONCHKF) ) exit_fun("exit because configuration failed\n");
-
 
 #endif  /* INCLUDE_CONFIG_LOADCONFIGMODULE_H */

common/config/config_paramdesc.h

@@ -38,7 +38,7 @@
 
 
 #define MAX_OPTNAME_SIZE 64
-#define CONFIG_MAXOPTLENGTH 512 /* max full option length, full option name exemple: (prefix1.[<index>].prefix2.optname */
+
 
 
 /* parameter flags definitions */
@@ -55,81 +55,83 @@
 #define PARAMFLAG_PARAMSET                (1 << 16)        // parameter has been explicitely set in get functions
 #define PARAMFLAG_PARAMSETDEF             (1 << 17)        // parameter has been set to default value in get functions
 
+
 /* checkedparam_t is possibly used in paramdef_t for specific parameter value validation */
 #define CONFIG_MAX_NUMCHECKVAL            20
 typedef struct paramdef paramdef_t;
 typedef union checkedparam {
-  struct  {
-    int  (*f1)(paramdef_t *param);   /* check an integer against a list of authorized values */
-    int okintval[CONFIG_MAX_NUMCHECKVAL];                        /* integer array, store possible values  */
-    int num_okintval;                                            /* number of valid values in the checkingval array */
-  } s1;
-  struct  {
-    int  (*f1a)(paramdef_t *param);   /* check an integer against a list of authorized values and set param value */
-    /* to the corresponding item in setintval array (mainly for RRC params)     */
-    int okintval[CONFIG_MAX_NUMCHECKVAL];                        /* integer array, store possible values in config file */
-    int setintval[CONFIG_MAX_NUMCHECKVAL];                        /* integer array, values set in the paramdef structure */
-    int num_okintval;                                            /* number of valid values in the checkingval array */
-  } s1a;
-  struct {
-    int  (*f2)(paramdef_t *param);  /* check an integer against an authorized range, defined by its min and max value */
-    int okintrange[CONFIG_MAX_NUMCHECKVAL];  /* integer array, store  min and max values  */
-
-  } s2;
-  struct {
-    int  (*f3)(paramdef_t *param); /* check a string against a list of authorized values */
-    char *okstrval[CONFIG_MAX_NUMCHECKVAL];                      /* string array, store possible values  */
-    int  num_okstrval;                                           /* number of valid values in the checkingval array */
-  } s3;
-  struct {
-    int  (*f3a)(paramdef_t *param); /* check a string against a list of authorized values and set param value */
-    /* to the corresponding item in setintval array (mainly for RRC params) */
-    char *okstrval[CONFIG_MAX_NUMCHECKVAL];                      /* string array, store possible values  */
-    int  setintval[CONFIG_MAX_NUMCHECKVAL];                      /* integer array, values set in the paramdef structure */
-    int  num_okstrval;                                           /* number of valid values in the checkingval array */
-  } s3a;
-  struct {
-    int  (*f4)(paramdef_t *param); /* generic check function, no arguments but the param description */
-
-  } s4;
-  struct {
-    void (*checkfunc)(void) ;
-  } s5;
+        struct  { 
+               int  (*f1)(paramdef_t *param);   /* check an integer against a list of authorized values */
+               int okintval[CONFIG_MAX_NUMCHECKVAL];                        /* integer array, store possible values  */
+               int num_okintval;                                            /* number of valid values in the checkingval array */
+        } s1;
+        struct  { 
+               int  (*f1a)(paramdef_t *param);   /* check an integer against a list of authorized values and set param value */
+                                                 /* to the corresponding item in setintval array (mainly for RRC params)     */
+               int okintval[CONFIG_MAX_NUMCHECKVAL];                        /* integer array, store possible values in config file */
+               int setintval[CONFIG_MAX_NUMCHECKVAL];                        /* integer array, values set in the paramdef structure */
+               int num_okintval;                                            /* number of valid values in the checkingval array */
+        } s1a;
+        struct { 
+               int  (*f2)(paramdef_t *param);  /* check an integer against an authorized range, defined by its min and max value */
+               int okintrange[CONFIG_MAX_NUMCHECKVAL];  /* integer array, store  min and max values  */
+   
+        } s2;
+        struct {
+               int  (*f3)(paramdef_t *param); /* check a string against a list of authorized values */
+               char *okstrval[CONFIG_MAX_NUMCHECKVAL];                      /* string array, store possible values  */
+               int  num_okstrval;                                           /* number of valid values in the checkingval array */
+        } s3;
+        struct {
+               int  (*f3a)(paramdef_t *param); /* check a string against a list of authorized values and set param value */
+                                                 /* to the corresponding item in setintval array (mainly for RRC params) */
+               char *okstrval[CONFIG_MAX_NUMCHECKVAL];                      /* string array, store possible values  */
+               int  setintval[CONFIG_MAX_NUMCHECKVAL];                      /* integer array, values set in the paramdef structure */
+               int  num_okstrval;                                           /* number of valid values in the checkingval array */
+        } s3a;
+        struct {
+               int  (*f4)(paramdef_t *param); /* generic check function, no arguments but the param description */
+               
+        } s4;
+        struct { 
+                void (*checkfunc)(void) ; 
+        } s5;
 } checkedparam_t;
 
 /* paramdef is used to describe a parameter, array of paramdef_t strustures is used as the main parameter in */
 /* config apis used to retrieve parameters values  */
-typedef struct paramdef {
-  char         optname[MAX_OPTNAME_SIZE]; /* parameter name, can be used as long command line option */
-  char         *helpstr;                  /* help string */
-  unsigned int paramflags;                /* value is a "ored" combination of above PARAMFLAG_XXXX values */
-  union {                                 /* pointer to the parameter value, completed by the config module */
-    char **strptr;
-    char **strlistptr;
-    uint8_t   *u8ptr;
-    int8_t    *i8ptr;
-    uint16_t  *u16ptr;
-    int16_t   *i16ptr;
-    uint32_t  *uptr;
-    int32_t   *iptr;
-    uint64_t  *u64ptr;
-    int64_t   *i64ptr;
-    double    *dblptr;
-    void      *voidptr;
-  } ;
-  union {                                /* default parameter value, to be used when PARAMFLAG_MANDATORY is not specified */
-    char      *defstrval;
-    char      **defstrlistval;
-    uint32_t  defuintval;
-    int       defintval;
-    uint64_t  defint64val;
-    int       *defintarrayval;
-    double    defdblval;
-  } ;
-  char type;                              /* parameter value type, as listed below as TYPE_XXXX macro */
-  int numelt;                             /* number of elements in a list or array parameters or max size of string value */
-  checkedparam_t   *chkPptr;              /* possible pointer to the structure containing the info used to check parameter values */
-  int *processedvalue;                    /* used to store integer values computed from string original value */
+typedef struct paramdef
+{
+   char         optname[MAX_OPTNAME_SIZE]; /* parameter name, can be used as long command line option */
+   char         *helpstr;                  /* help string */
+   unsigned int paramflags;                /* value is a "ored" combination of above PARAMFLAG_XXXX values */
+   union {                                 /* pointer to the parameter value, completed by the config module */
+     char **strptr;
+     char **strlistptr;
+     uint8_t   *u8ptr;
+     int8_t    *i8ptr;     
+     uint16_t  *u16ptr;
+     int16_t   *i16ptr;
+     uint32_t  *uptr;
+     int32_t   *iptr;
+     uint64_t  *u64ptr;
+     int64_t   *i64ptr;
+     double    *dblptr;
+     void      *voidptr;
+     } ;
+   union {                                /* default parameter value, to be used when PARAMFLAG_MANDATORY is not specified */
+     char      *defstrval;
+     char      **defstrlistval;
+     uint32_t  defuintval;
+     int       defintval;
+     uint64_t  defint64val;
+     int       *defintarrayval;
+     double    defdblval;
+     } ;   
+   char type;                              /* parameter value type, as listed below as TYPE_XXXX macro */
+   int numelt;                             /* number of elements in a list or array parameters or max size of string value */ 
+   checkedparam_t   *chkPptr;              /* possible pointer to the structure containing the info used to check parameter values */
+   int *processedvalue;                    /* used to store integer values computed from string original value */
 } paramdef_t;
 
 #define TYPE_INT        TYPE_INT32
@@ -159,9 +161,9 @@ typedef struct paramdef {
 #define ANY_IPV4ADDR_STRING "0.0.0.0"
 
 typedef struct paramlist_def {
-  char listname[MAX_OPTNAME_SIZE];
-  paramdef_t **paramarray;
-  int numelt ;
+    char listname[MAX_OPTNAME_SIZE];
+    paramdef_t **paramarray;
+    int numelt ;
 } paramlist_def_t;
 
 /* macro helpers for module users */

common/config/config_userapi.c

@@ -39,453 +39,414 @@
 #include <errno.h>
 #include <dlfcn.h>
 #include <arpa/inet.h>
+
 #include <platform_types.h>
 #include "config_userapi.h"
-#include "../utils/LOG/log.h"
 
-configmodule_interface_t *config_get_if(void) {
-  if (cfgptr == NULL) {
-    CONFIG_PRINTF_ERROR("[CONFIG] %s %d config module not initialized\n",__FILE__,__LINE__);
-  }
 
-  return cfgptr;
+configmodule_interface_t *config_get_if(void)
+{
+    if (cfgptr == NULL) {
+        fprintf(stderr,"[CONFIG] %s %d config module not initialized\n",__FILE__, __LINE__);
+	exit(-1);
+    }
+    return cfgptr;
 }
 
-char *config_check_valptr(paramdef_t *cfgoptions, char **ptr, int length) {
-  if (ptr == NULL ) {
-    ptr = malloc(sizeof(char *));
+char * config_check_valptr(paramdef_t *cfgoptions, char **ptr, int length) 
+{
+     if (ptr == NULL ) {
+        ptr = malloc(sizeof(char *));
+        if (ptr != NULL) {
+            *ptr=NULL;
+            cfgoptions->strptr=ptr;
+            if ( (cfgoptions->paramflags & PARAMFLAG_NOFREE) == 0) {
+            	config_get_if()->ptrs[config_get_if()->numptrs] = (char *)ptr;
+            	config_get_if()->numptrs++;
+            }
+        } else {		 
+            fprintf(stderr, "[CONFIG] %s %d option %s, cannot allocate pointer: %s \n", 
+                    __FILE__, __LINE__, cfgoptions->optname, strerror(errno));
+            exit(-1);
+        }         
+     }
+     printf_ptrs("[CONFIG] %s ptr: 0x%08lx requested size: %i\n",cfgoptions->optname,(uintptr_t)(ptr),length);
+     if(cfgoptions->numelt > 0 && PARAM_ISSCALAR(cfgoptions)  ) { /* already allocated */
+          if (*ptr != NULL) {
+              return *ptr;
+          } else {
+              fprintf(stderr,"[CONFIG] %s %d option %s, definition error: value pointer is NULL, declared as %i bytes allocated\n", 
+                       __FILE__, __LINE__,cfgoptions->optname, cfgoptions->numelt);
+              exit(-1);
+          }
+     }
 
-    if (ptr != NULL) {
-      *ptr=NULL;
-      cfgoptions->strptr=ptr;
-
-      if ( (cfgoptions->paramflags & PARAMFLAG_NOFREE) == 0) {
-        config_get_if()->ptrs[config_get_if()->numptrs] = (char *)ptr;
-        config_get_if()->numptrs++;
-      }
-    } else {
-      CONFIG_PRINTF_ERROR("[CONFIG] %s %d option %s, cannot allocate pointer: %s \n",
-                          __FILE__, __LINE__, cfgoptions->optname, strerror(errno));
-    }
-  }
-
-  printf_ptrs("[CONFIG] %s ptr: 0x%08lx requested size: %i\n",cfgoptions->optname,(uintptr_t)(ptr),length);
-
-  if(cfgoptions->numelt > 0 && PARAM_ISSCALAR(cfgoptions)  ) { /* already allocated */
-    if (*ptr != NULL) {
-      return *ptr;
-    } else {
-      CONFIG_PRINTF_ERROR("[CONFIG] %s %d option %s, definition error: value pointer is NULL, declared as %i bytes allocated\n",
-                          __FILE__, __LINE__,cfgoptions->optname, cfgoptions->numelt);
-    }
-  }
-
-  if (*ptr == NULL) {
-    *ptr = malloc(length);
-
-    if ( *ptr != NULL) {
-      memset(*ptr,0,length);
-
-      if ( (cfgoptions->paramflags & PARAMFLAG_NOFREE) == 0) {
-        config_get_if()->ptrs[config_get_if()->numptrs] = *ptr;
-        config_get_if()->numptrs++;
-      }
-    } else {
-      CONFIG_PRINTF_ERROR("[CONFIG] %s %d malloc error\n",__FILE__, __LINE__);
-    }
-  }
-
-  return *ptr;
+     if (*ptr == NULL) {
+        *ptr = malloc(length);
+        if ( *ptr != NULL) {
+             memset(*ptr,0,length);
+             if ( (cfgoptions->paramflags & PARAMFLAG_NOFREE) == 0) {
+                 config_get_if()->ptrs[config_get_if()->numptrs] = *ptr;
+                 config_get_if()->numptrs++;
+             }
+        } else {
+             fprintf (stderr,"[CONFIG] %s %d malloc error\n",__FILE__, __LINE__);
+             exit(-1);
+        }       
+     }
+     return *ptr;
 }
 
-void config_assign_int(paramdef_t *cfgoptions, char *fullname, int val) {
-  int tmpval=val;
-
+void config_assign_int(paramdef_t *cfgoptions, char *fullname, int val)
+{
+int tmpval=val;
   if ( ((cfgoptions->paramflags &PARAMFLAG_BOOL) != 0) && tmpval >0) {
-    tmpval =1;
+      tmpval =1;
   }
-
   switch (cfgoptions->type) {
-    case TYPE_UINT8:
-      *(cfgoptions->u8ptr) = (uint8_t)tmpval;
-      printf_params("[CONFIG] %s: %u\n", fullname, (uint8_t)tmpval);
-      break;
-
-    case TYPE_INT8:
-      *(cfgoptions->i8ptr) = (int8_t)tmpval;
-      printf_params("[CONFIG] %s: %i\n", fullname, (int8_t)tmpval);
-      break;
-
-    case TYPE_UINT16:
-      *(cfgoptions->u16ptr) = (uint16_t)tmpval;
-      printf_params("[CONFIG] %s: %hu\n", fullname, (uint16_t)tmpval);
-      break;
-
-    case TYPE_INT16:
-      *(cfgoptions->i16ptr) = (int16_t)tmpval;
-      printf_params("[CONFIG] %s: %hi\n", fullname, (int16_t)tmpval);
-      break;
-
-    case TYPE_UINT32:
-      *(cfgoptions->uptr) = (uint32_t)tmpval;
-      printf_params("[CONFIG] %s: %u\n", fullname, (uint32_t)tmpval);
-      break;
-
-    case TYPE_MASK:
-      *(cfgoptions->uptr) = *(cfgoptions->uptr) | (uint32_t)tmpval;
-      printf_params("[CONFIG] %s: 0x%08x\n", fullname, (uint32_t)tmpval);
-      break;
-
-    case TYPE_INT32:
-      *(cfgoptions->iptr) = (int32_t)tmpval;
-      printf_params("[CONFIG] %s: %i\n", fullname, (int32_t)tmpval);
-      break;
-
-    default:
-      fprintf (stderr,"[CONFIG] %s %i type %i non integer parameter %s not assigned\n",__FILE__, __LINE__,cfgoptions->type,fullname);
-      break;
+       	case TYPE_UINT8:
+	     *(cfgoptions->u8ptr) = (uint8_t)tmpval;
+	     printf_params("[CONFIG] %s: %u\n", fullname, (uint8_t)tmpval);
+	break;
+       	case TYPE_INT8:
+	     *(cfgoptions->i8ptr) = (int8_t)tmpval;
+	     printf_params("[CONFIG] %s: %i\n", fullname, (int8_t)tmpval);
+	break;		
+       	case TYPE_UINT16:
+	     *(cfgoptions->u16ptr) = (uint16_t)tmpval;
+	     printf_params("[CONFIG] %s: %hu\n", fullname, (uint16_t)tmpval);     
+	break;
+       	case TYPE_INT16:
+	     *(cfgoptions->i16ptr) = (int16_t)tmpval;
+	     printf_params("[CONFIG] %s: %hi\n", fullname, (int16_t)tmpval);
+	break;	
+       	case TYPE_UINT32:
+	     *(cfgoptions->uptr) = (uint32_t)tmpval;
+	     printf_params("[CONFIG] %s: %u\n", fullname, (uint32_t)tmpval);
+	break;
+       	case TYPE_MASK:
+	     *(cfgoptions->uptr) = *(cfgoptions->uptr) | (uint32_t)tmpval;
+	     printf_params("[CONFIG] %s: 0x%08x\n", fullname, (uint32_t)tmpval);
+	break;
+       	case TYPE_INT32:
+	     *(cfgoptions->iptr) = (int32_t)tmpval;
+	     printf_params("[CONFIG] %s: %i\n", fullname, (int32_t)tmpval);
+	break;	
+	default:
+	     fprintf (stderr,"[CONFIG] %s %i type %i non integer parameter %s not assigned\n",__FILE__, __LINE__,cfgoptions->type,fullname);
+	break;
   }
 }
 void config_assign_processedint(paramdef_t *cfgoption, int val) {
-  cfgoption->processedvalue = malloc(sizeof(int));
-
-  if (  cfgoption->processedvalue != NULL) {
-    *(cfgoption->processedvalue) = val;
-  } else {
-    CONFIG_PRINTF_ERROR("[CONFIG] %s %d malloc error\n",__FILE__, __LINE__);
-  }
+        cfgoption->processedvalue = malloc(sizeof(int));
+        if (  cfgoption->processedvalue != NULL) {
+             *(cfgoption->processedvalue) = val;
+        } else {
+             fprintf (stderr,"[CONFIG] %s %d malloc error\n",__FILE__, __LINE__);
+             exit(-1);
+        }            
 }
 
 int config_get_processedint(paramdef_t *cfgoption) {
-  int ret;
-
-  if (  cfgoption->processedvalue != NULL) {
-    ret=*(cfgoption->processedvalue);
-    free( cfgoption->processedvalue);
-    cfgoption->processedvalue=NULL;
-    printf_params("[CONFIG] %s:  set from %s to %i\n",cfgoption->optname, *(cfgoption->strptr), ret);
-  } else {
-    fprintf (stderr,"[CONFIG] %s %d %s has no processed integer availablle\n",__FILE__, __LINE__, cfgoption->optname);
-    ret=0;
-  }
-
-  return ret;
+   int ret;
+        if (  cfgoption->processedvalue != NULL) {
+             ret=*(cfgoption->processedvalue);
+             free( cfgoption->processedvalue);
+             cfgoption->processedvalue=NULL;
+             printf_params("[CONFIG] %s:  set from %s to %i\n",cfgoption->optname, *(cfgoption->strptr), ret);
+        } else {
+             fprintf (stderr,"[CONFIG] %s %d %s has no processed integer availablle\n",__FILE__, __LINE__, cfgoption->optname);
+             ret=0;
+        }
+return ret;            
 }
-void config_printhelp(paramdef_t *params,int numparams, char *prefix) {
-  printf("\n-----Help for section %-26s: %03i entries------\n",(prefix==NULL)?"(root section)":prefix ,numparams);
-
-  for (int i=0 ; i<numparams ; i++) {
-    printf("    %s%s: %s",
-           (strlen(params[i].optname) <= 1) ? "-" : "--",
-           params[i].optname,
-           (params[i].helpstr != NULL)?params[i].helpstr:"Help string not specified\n");
-  }   /* for on params entries */
-
-  printf("--------------------------------------------------------------------\n\n");
+void config_printhelp(paramdef_t *params,int numparams)
+{
+   for (int i=0 ; i<numparams ; i++) {
+       if ( params[i].helpstr != NULL) {
+           printf("%s%s: %s",
+	           (strlen(params[i].optname) <= 1) ? "-" : "--", 
+	           params[i].optname,
+	           params[i].helpstr);
+       }
+   }
 }
 
-int config_execcheck(paramdef_t *params,int numparams, char *prefix) {
-  int st=0;
+int config_execcheck(paramdef_t *params,int numparams, char *prefix)
+{
+int st=0;
 
-  for (int i=0 ; i<numparams ; i++) {
-    if ( params[i].chkPptr == NULL) {
-      continue;
-    }
-
-    if (params[i].chkPptr->s4.f4 != NULL) {
-      st += params[i].chkPptr->s4.f4(&(params[i]));
-    }
-  }
-
-  if (st != 0) {
-    CONFIG_PRINTF_ERROR("[CONFIG] config_execcheck: section %s %i parameters with wrong value\n", prefix, -st);
-  }
-
-  return st;
+   for (int i=0 ; i<numparams ; i++) {
+       if ( params[i].chkPptr == NULL) {
+           continue;
+       }
+       if (params[i].chkPptr->s4.f4 != NULL) {
+         st += params[i].chkPptr->s4.f4(&(params[i]));
+       }
+   }
+   if (st != 0) {
+      fprintf(stderr,"[CONFIG] config_execcheck: section %s %i parameters with wrong value\n", prefix, -st); 
+      if ( CONFIG_ISFLAGSET(CONFIG_NOABORTONCHKF) == 0) {
+          exit_fun("exit because configuration failed\n");
+      }
+   }
+return st;
 }
 
-int config_get(paramdef_t *params,int numparams, char *prefix) {
-  int ret= -1;
+int config_get(paramdef_t *params,int numparams, char *prefix)
+{
+int ret= -1;
 
-  if (CONFIG_ISFLAGSET(CONFIG_ABORT)) {
+if (CONFIG_ISFLAGSET(CONFIG_ABORT)) {
     fprintf(stderr,"[CONFIG] config_get, section %s skipped, config module not properly initialized\n",prefix);
     return ret;
-  }
-
-  configmodule_interface_t *cfgif = config_get_if();
-
+}
+configmodule_interface_t *cfgif = config_get_if();
   if (cfgif != NULL) {
-    ret = config_get_if()->get(params, numparams,prefix);
-
-    if (ret >= 0) {
-      config_process_cmdline(params,numparams,prefix);
-      config_execcheck(params,numparams,prefix);
-    }
-
-    return ret;
-  }
-
+      ret = config_get_if()->get(params, numparams,prefix);
+      if (ret >= 0) {
+         config_process_cmdline(params,numparams,prefix);
+         config_execcheck(params,numparams,prefix);
+     }
   return ret;
+  }
+return ret;
 }
 
-int config_getlist(paramlist_def_t *ParamList, paramdef_t *params, int numparams, char *prefix) {
+int config_getlist(paramlist_def_t *ParamList, paramdef_t *params, int numparams, char *prefix)
+{
   if (CONFIG_ISFLAGSET(CONFIG_ABORT)) {
     fprintf(stderr,"[CONFIG] config_get skipped, config module not properly initialized\n");
     return -1;
   }
-
   if (!config_get_if())
     return -1;
 
   const int ret = config_get_if()->getlist(ParamList, params, numparams, prefix);
-
   if (ret >= 0 && params) {
     char *newprefix;
-
     if (prefix) {
       int rc = asprintf(&newprefix, "%s.%s", prefix, ParamList->listname);
-
       if (rc < 0) newprefix = NULL;
     } else {
       newprefix = ParamList->listname;
     }
-
     char cfgpath[MAX_OPTNAME_SIZE*2 + 6]; /* prefix.listname.[listindex] */
-
     for (int i = 0; i < ParamList->numelt; ++i) {
       // TODO config_process_cmdline?
       sprintf(cfgpath, "%s.[%i]", newprefix, i);
-      config_process_cmdline(ParamList->paramarray[i],numparams,cfgpath);
       config_execcheck(ParamList->paramarray[i], numparams, cfgpath);
     }
-
     if (prefix)
       free(newprefix);
   }
-
   return ret;
 }
 
-int config_isparamset(paramdef_t *params,int paramidx) {
+int config_isparamset(paramdef_t *params,int paramidx)
+{
   if ((params[paramidx].paramflags & PARAMFLAG_PARAMSET) != 0) {
-    return 1;
+      return 1;
   } else {
-    return 0;
+      return 0;
   }
 }
 
 void print_intvalueerror(paramdef_t *param, char *fname, int *okval, int numokval) {
-  fprintf(stderr,"[CONFIG] %s: %s: %i invalid value, authorized values:\n       ",
-          fname,param->optname, (int)*(param->uptr));
-
-  for ( int i=0; i<numokval ; i++) {
-    fprintf(stderr, " %i",okval[i]);
-  }
-
-  fprintf(stderr, " \n");
+    fprintf(stderr,"[CONFIG] %s: %s: %i invalid value, authorized values:\n       ",
+           fname,param->optname, (int)*(param->uptr));
+    for ( int i=0; i<numokval ; i++) {
+         fprintf(stderr, " %i",okval[i]);
+         }
+    fprintf(stderr, " \n");
 }
-
-int config_check_intval(paramdef_t *param) {
-  if ( param == NULL ) {
-    fprintf(stderr,"[CONFIG] config_check_intval: NULL param argument\n");
+ 
+int config_check_intval(paramdef_t *param)
+{
+    if ( param == NULL ){
+       fprintf(stderr,"[CONFIG] config_check_intval: NULL param argument\n");
+       return -1;
+    }
+    for ( int i=0; i<param->chkPptr->s1.num_okintval ; i++) {
+         if( *(param->uptr) == param->chkPptr->s1.okintval[i] ) {
+             return 0;
+         }
+    }
+    print_intvalueerror(param,"config_check_intval", param->chkPptr->s1.okintval,param->chkPptr->s1.num_okintval);
     return -1;
-  }
-
-  for ( int i=0; i<param->chkPptr->s1.num_okintval ; i++) {
-    if( *(param->uptr) == param->chkPptr->s1.okintval[i] ) {
-      return 0;
-    }
-  }
-
-  print_intvalueerror(param,"config_check_intval", param->chkPptr->s1.okintval,param->chkPptr->s1.num_okintval);
-  return -1;
 }
 
-int config_check_modify_integer(paramdef_t *param) {
-  for (int i=0; i < param->chkPptr->s1a.num_okintval ; i++) {
-    if (*(param->uptr) == param->chkPptr->s1a.okintval[i] ) {
-      printf_params("[CONFIG] %s:  read value %i, set to %i\n",param->optname,*(param->uptr),param->chkPptr->s1a.setintval [i]);
-      *(param->uptr) = param->chkPptr->s1a.setintval [i];
-      return 0;
-    }
-  }
-
-  print_intvalueerror(param,"config_check_modify_integer", param->chkPptr->s1a.okintval,param->chkPptr->s1a.num_okintval);
-  return -1;
+int config_check_modify_integer(paramdef_t *param)
+{
+   
+    for (int i=0; i < param->chkPptr->s1a.num_okintval ; i++) {
+    	if (*(param->uptr) == param->chkPptr->s1a.okintval[i] ) {
+            printf_params("[CONFIG] %s:  read value %i, set to %i\n",param->optname,*(param->uptr),param->chkPptr->s1a.setintval [i]);
+    	    *(param->uptr) = param->chkPptr->s1a.setintval [i];
+    	    return 0; 
+    	}
+   }
+    print_intvalueerror(param,"config_check_modify_integer", param->chkPptr->s1a.okintval,param->chkPptr->s1a.num_okintval);
+    return -1;
 }
 
-int config_check_intrange(paramdef_t *param) {
-  if( *(param->iptr) >= param->chkPptr->s2.okintrange[0]  && *(param->iptr) <= param->chkPptr->s2.okintrange[1]  ) {
-    return 0;
-  }
-
-  fprintf(stderr,"[CONFIG] config_check_intrange: %s: %i invalid value, authorized range: %i %i\n",
-          param->optname, (int)*(param->uptr), param->chkPptr->s2.okintrange[0], param->chkPptr->s2.okintrange[1]);
-  return -1;
+int config_check_intrange(paramdef_t *param)
+{
+   if( *(param->iptr) >= param->chkPptr->s2.okintrange[0]  && *(param->iptr) <= param->chkPptr->s2.okintrange[1]  ) {
+       return 0;
+   }
+   fprintf(stderr,"[CONFIG] config_check_intrange: %s: %i invalid value, authorized range: %i %i\n",
+           param->optname, (int)*(param->uptr), param->chkPptr->s2.okintrange[0], param->chkPptr->s2.okintrange[1]);
+   return -1;
 }
 
 void print_strvalueerror(paramdef_t *param, char *fname, char **okval, int numokval) {
-  fprintf(stderr,"[CONFIG] %s: %s: %s invalid value, authorized values:\n       ",
-          fname,param->optname, *(param->strptr));
-
-  for ( int i=0; i<numokval ; i++) {
-    fprintf(stderr, " %s",okval[i]);
-  }
-
-  fprintf(stderr, " \n");
+    fprintf(stderr,"[CONFIG] %s: %s: %s invalid value, authorized values:\n       ",
+           fname,param->optname, *(param->strptr));
+    for ( int i=0; i<numokval ; i++) {
+         fprintf(stderr, " %s",okval[i]);
+         }
+    fprintf(stderr, " \n");
 }
-
-int config_check_strval(paramdef_t *param) {
-  if ( param == NULL ) {
-    fprintf(stderr,"[CONFIG] config_check_strval: NULL param argument\n");
+ 
+int config_check_strval(paramdef_t *param)
+{
+    if ( param == NULL ){
+       fprintf(stderr,"[CONFIG] config_check_strval: NULL param argument\n");
+       return -1;
+    }
+    for ( int i=0; i<param->chkPptr->s3.num_okstrval ; i++) {
+         if( strcasecmp(*(param->strptr),param->chkPptr->s3.okstrval[i] ) == 0) {
+             return 0;
+         }
+    }
+    print_strvalueerror(param, "config_check_strval", param->chkPptr->s3.okstrval, param->chkPptr->s3.num_okstrval);
     return -1;
-  }
-
-  for ( int i=0; i<param->chkPptr->s3.num_okstrval ; i++) {
-    if( strcasecmp(*(param->strptr),param->chkPptr->s3.okstrval[i] ) == 0) {
-      return 0;
-    }
-  }
-
-  print_strvalueerror(param, "config_check_strval", param->chkPptr->s3.okstrval, param->chkPptr->s3.num_okstrval);
-  return -1;
 }
 
-int config_checkstr_assign_integer(paramdef_t *param) {
-  for (int i=0; i < param->chkPptr->s3a.num_okstrval ; i++) {
-    if (strcasecmp(*(param->strptr),param->chkPptr->s3a.okstrval[i]  ) == 0) {
-      config_assign_processedint(param, param->chkPptr->s3a.setintval[i]);
-      return 0;
-    }
-  }
+int config_checkstr_assign_integer(paramdef_t *param)
+{
 
-  print_strvalueerror(param, "config_check_strval", param->chkPptr->s3a.okstrval, param->chkPptr->s3a.num_okstrval);
-  return -1;
+
+    for (int i=0; i < param->chkPptr->s3a.num_okstrval ; i++) {
+    	if (strcasecmp(*(param->strptr),param->chkPptr->s3a.okstrval[i]  ) == 0) {
+            config_assign_processedint(param, param->chkPptr->s3a.setintval[i]);
+    	    return 0; 
+    	}
+   }
+   print_strvalueerror(param, "config_check_strval", param->chkPptr->s3a.okstrval, param->chkPptr->s3a.num_okstrval);
+
+    return -1;
 }
 
-void config_set_checkfunctions(paramdef_t *params, checkedparam_t *checkfunctions, int numparams) {
-  for (int i=0; i< numparams ; i++ ) {
-    params[i].chkPptr = &(checkfunctions[i]);
-  }
-}
-
-int config_setdefault_string(paramdef_t *cfgoptions, char *prefix) {
+int config_setdefault_string(paramdef_t *cfgoptions, char *prefix)
+{
   int status = 0;
-
   if( cfgoptions->defstrval != NULL) {
-    status=1;
+     status=1;
 
-    if (cfgoptions->numelt == 0 ) {
-      config_check_valptr(cfgoptions, (char **)(cfgoptions->strptr), sizeof(char *));
-      config_check_valptr(cfgoptions, cfgoptions->strptr, strlen(cfgoptions->defstrval)+1);
-      sprintf(*(cfgoptions->strptr), "%s",cfgoptions->defstrval);
-      printf_params("[CONFIG] %s.%s set to default value \"%s\"\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname, *(cfgoptions->strptr));
-    } else {
-      sprintf((char *)*(cfgoptions->strptr), "%s",cfgoptions->defstrval);
-      printf_params("[CONFIG] %s.%s set to default value \"%s\"\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname, (char *)*(cfgoptions->strptr));
-    }
+     if (cfgoptions->numelt == 0 ) {
+	 config_check_valptr(cfgoptions, (char **)(cfgoptions->strptr), sizeof(char *));
+	 config_check_valptr(cfgoptions, cfgoptions->strptr, strlen(cfgoptions->defstrval)+1);
+	 sprintf(*(cfgoptions->strptr), "%s",cfgoptions->defstrval);
+	 printf_params("[CONFIG] %s.%s set to default value \"%s\"\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname, *(cfgoptions->strptr));
+     } else {
+	sprintf((char *)*(cfgoptions->strptr), "%s",cfgoptions->defstrval);
+	printf_params("[CONFIG] %s.%s set to default value \"%s\"\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname, (char *)*(cfgoptions->strptr));
+     }
   }
-
   return status;
 }
 
-int config_setdefault_stringlist(paramdef_t *cfgoptions, char *prefix) {
+int config_setdefault_stringlist(paramdef_t *cfgoptions, char *prefix)
+{
   int status = 0;
-
   if( cfgoptions->defstrlistval != NULL) {
-    cfgoptions->strlistptr=cfgoptions->defstrlistval;
-    status=1;
-
-    for(int j=0; j<cfgoptions->numelt; j++)
-      printf_params("[CONFIG] %s.%s[%i] set to default value %s\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname,j, cfgoptions->strlistptr[j]);
+     cfgoptions->strlistptr=cfgoptions->defstrlistval;
+     status=1;
+     for(int j=0; j<cfgoptions->numelt; j++)
+  	 printf_params("[CONFIG] %s.%s[%i] set to default value %s\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname,j, cfgoptions->strlistptr[j]);
   }
-
   return status;
 }
 
-int config_setdefault_int(paramdef_t *cfgoptions, char *prefix) {
+int config_setdefault_int(paramdef_t *cfgoptions, char *prefix)
+{
   int status = 0;
   config_check_valptr(cfgoptions, (char **)(&(cfgoptions->iptr)),sizeof(int32_t));
-
   if( ((cfgoptions->paramflags & PARAMFLAG_MANDATORY) == 0)) {
-    config_assign_int(cfgoptions,cfgoptions->optname,cfgoptions->defintval);
-    status=1;
-    printf_params("[CONFIG] %s.%s set to default value\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname);
+     config_assign_int(cfgoptions,cfgoptions->optname,cfgoptions->defintval);
+     status=1;
+     printf_params("[CONFIG] %s.%s set to default value\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname);
   }
-
   return status;
-}
+}	
 
-int config_setdefault_int64(paramdef_t *cfgoptions, char *prefix) {
+int config_setdefault_int64(paramdef_t *cfgoptions, char *prefix)
+{
   int status = 0;
   config_check_valptr(cfgoptions, (char **)&(cfgoptions->i64ptr),sizeof(long long));
-
   if( ((cfgoptions->paramflags & PARAMFLAG_MANDATORY) == 0)) {
-    *(cfgoptions->u64ptr)=cfgoptions->defuintval;
-    status=1;
-    printf_params("[CONFIG] %s.%s set to default value %llu\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname, (long long unsigned)(*(cfgoptions->u64ptr)));
+     *(cfgoptions->u64ptr)=cfgoptions->defuintval;
+     status=1;
+     printf_params("[CONFIG] %s.%s set to default value %llu\n", ((prefix == NULL) ? "" : prefix), cfgoptions->optname, (long long unsigned)(*(cfgoptions->u64ptr)));
   }
-
   return status;
 }
 
-int config_setdefault_intlist(paramdef_t *cfgoptions, char *prefix) {
-  int status = 0;
-
+int config_setdefault_intlist(paramdef_t *cfgoptions, char *prefix)
+{
+  int status = 0;	  
   if( cfgoptions->defintarrayval != NULL) {
-    config_check_valptr(cfgoptions,(char **)&(cfgoptions->iptr), sizeof(int32_t *));
+    config_check_valptr(cfgoptions,(char **)&(cfgoptions->iptr), sizeof(int32_t*));
     cfgoptions->iptr=cfgoptions->defintarrayval;
     status=1;
-
     for (int j=0; j<cfgoptions->numelt ; j++) {
-      printf_params("[CONFIG] %s[%i] set to default value %i\n",cfgoptions->optname ,j,(int)cfgoptions->iptr[j]);
+  	printf_params("[CONFIG] %s[%i] set to default value %i\n",cfgoptions->optname ,j,(int)cfgoptions->iptr[j]);
     }
   }
-
   return status;
 }
 
-int config_setdefault_double(paramdef_t *cfgoptions, char *prefix) {
+int config_setdefault_double(paramdef_t *cfgoptions, char *prefix)
+{
   int status = 0;
   config_check_valptr(cfgoptions, (char **)&(cfgoptions->dblptr),sizeof(double));
-
   if( ((cfgoptions->paramflags & PARAMFLAG_MANDATORY) == 0)) {
-    *(cfgoptions->u64ptr)=cfgoptions->defdblval;
-    status=1;
-    printf_params("[CONFIG] %s set to default value %lf\n",cfgoptions->optname , *(cfgoptions->dblptr));
+     *(cfgoptions->u64ptr)=cfgoptions->defdblval;
+     status=1;
+     printf_params("[CONFIG] %s set to default value %lf\n",cfgoptions->optname , *(cfgoptions->dblptr));
   }
-
   return status;
-}
+} 
 
-int config_assign_ipv4addr(paramdef_t *cfgoptions, char *ipv4addr) {
+int config_assign_ipv4addr(paramdef_t *cfgoptions, char *ipv4addr)
+{
   config_check_valptr(cfgoptions,(char **)&(cfgoptions->uptr), sizeof(int));
-  int rst=inet_pton(AF_INET, ipv4addr ,cfgoptions->uptr );
-
+  int rst=inet_pton(AF_INET, ipv4addr ,cfgoptions->uptr ); 
   if (rst == 1 && *(cfgoptions->uptr) > 0) {
-    printf_params("[CONFIG] %s: %s\n",cfgoptions->optname, ipv4addr);
-    return 1;
+     printf_params("[CONFIG] %s: %s\n",cfgoptions->optname, ipv4addr);
+     return 1;
   } else {
-    if ( strncmp(ipv4addr,ANY_IPV4ADDR_STRING,sizeof(ANY_IPV4ADDR_STRING)) == 0) {
-      printf_params("[CONFIG] %s:%s (INADDR_ANY) \n",cfgoptions->optname,ipv4addr);
-      *cfgoptions->uptr=INADDR_ANY;
-      return 1;
-    } else {
-      fprintf(stderr,"[CONFIG] %s not valid for %s \n", ipv4addr, cfgoptions->optname);
-      return -1;
-    }
+     if ( strncmp(ipv4addr,ANY_IPV4ADDR_STRING,sizeof(ANY_IPV4ADDR_STRING)) == 0) {
+  	printf_params("[CONFIG] %s:%s (INADDR_ANY) \n",cfgoptions->optname,ipv4addr);
+  	*cfgoptions->uptr=INADDR_ANY;
+        return 1;
+     } else {
+  	fprintf(stderr,"[CONFIG] %s not valid for %s \n", ipv4addr, cfgoptions->optname);
+     	return -1;
+     }
   }
-
   return 0;
 }
 
 
-int config_setdefault_ipv4addr(paramdef_t *cfgoptions,  char *prefix) {
+int config_setdefault_ipv4addr(paramdef_t *cfgoptions,  char *prefix)
+{
   int status = 0;
-
+ 
   if (cfgoptions->defstrval != NULL) {
-    status = config_assign_ipv4addr(cfgoptions, cfgoptions->defstrval);
+     status = config_assign_ipv4addr(cfgoptions, cfgoptions->defstrval);
   }
-
   return status;
-}
+}    

common/config/config_userapi.h

@@ -20,7 +20,7 @@
  */
 
 /*! \file common/config/config_userapi.h
- * \brief: configuration module, include file to be used by the source code calling the
+ * \brief: configuration module, include file to be used by the source code calling the 
  *  configuration module to access configuration parameters
  * \author Francois TABURET
  * \date 2017
@@ -31,7 +31,7 @@
  * \warning
  */
 #ifndef INCLUDE_CONFIG_USERAPI_H
-#define INCLUDE_CONFIG_USERAPI_H
+#define INCLUDE_CONFIG_USERAPI_H 
 #include "config_load_configmodule.h"
 
 #ifdef __cplusplus
@@ -48,22 +48,17 @@ extern "C"
 #define CONFIG_ISPARAMFLAGSET(P,F) ( !!(P.paramflags & F))
 /* utility functions, to be used by configuration module and/or configuration libraries */
 extern configmodule_interface_t *config_get_if(void);
-extern char *config_check_valptr(paramdef_t *cfgoptions, char **ptr, int length) ;
-extern void config_printhelp(paramdef_t *,int numparams, char *prefix);
+extern char * config_check_valptr(paramdef_t *cfgoptions, char **ptr, int length) ;
+extern void config_printhelp(paramdef_t *,int numparams);
 extern int config_process_cmdline(paramdef_t *params,int numparams, char *prefix);
 extern void config_assign_processedint(paramdef_t *cfgoption, int val);
 extern void config_assign_int(paramdef_t *cfgoptions, char *fullname, int val);
 extern int config_assign_ipv4addr(paramdef_t *cfgoptions, char *ipv4addr);
 
-/* apis to get/check parameters, to be used by oai modules, at configuration time */
-#define CONFIG_CHECKALLSECTIONS "ALLSECTIONS"
-extern int config_check_unknown_cmdlineopt(char *prefix);
+/* apis to get parameters, to be used by oai modules, at configuration time */
 extern int config_get(paramdef_t *params,int numparams, char *prefix);
 extern int config_getlist(paramlist_def_t *ParamList, paramdef_t *params, int numparams, char *prefix);
 
-/* apis to set some of the paramdef_t fields before using the get/getlist api's */
-extern void config_set_checkfunctions(paramdef_t *params, checkedparam_t *checkfunctions, int numparams);
-
 /* apis to retrieve parameters info after calling get or getlist functions */
 extern int config_isparamset(paramdef_t *params,int paramidx);
 extern int config_get_processedint(paramdef_t *cfgoption);

common/config/libconfig/config_libconfig.c

@@ -42,60 +42,60 @@
 #include "errno.h"
 
 #if ( LIBCONFIG_VER_MAJOR == 1 && LIBCONFIG_VER_MINOR < 5)
-  #define config_setting_lookup config_lookup_from
+#define config_setting_lookup config_lookup_from
 #endif
 
 void config_libconfig_end(void );
 
-int read_strlist(paramdef_t *cfgoptions,config_setting_t *setting, char *cfgpath) {
-  const char *str;
-  int st;
-  int numelt;
-  numelt=config_setting_length(setting);
-  config_check_valptr(cfgoptions,(char **)&(cfgoptions->strlistptr), sizeof(char *) * numelt);
-  st=0;
+int read_strlist(paramdef_t *cfgoptions,config_setting_t *setting, char *cfgpath)
+{
+const char *str;
+int st;
+int numelt;
 
-  for (int i=0; i< numelt ; i++) {
-    str=config_setting_get_string_elem(setting,i);
-
-    if (str==NULL) {
-      printf("[LIBCONFIG] %s%i  not found in config file\n", cfgoptions->optname,i);
-    } else {
-      config_check_valptr(cfgoptions,&(cfgoptions->strlistptr[i]),strlen(str)+1);
-      sprintf(cfgoptions->strlistptr[i],"%s",str);
-      st++;
-      printf_params("[LIBCONFIG] %s%i: %s\n", cfgpath,i,cfgoptions->strlistptr[i]);
-    }
-  }
-
-  cfgoptions->numelt=numelt;
-  return st;
+   numelt=config_setting_length(setting);
+   config_check_valptr(cfgoptions,(char **)&(cfgoptions->strlistptr), sizeof(char *) * numelt);
+   st=0;
+   for (int i=0; i< numelt ; i++) {
+       str=config_setting_get_string_elem(setting,i);
+       if (str==NULL) {
+          printf("[LIBCONFIG] %s%i  not found in config file\n", cfgoptions->optname,i);
+       } else {
+            config_check_valptr(cfgoptions,&(cfgoptions->strlistptr[i]),strlen(str)+1);
+            sprintf(cfgoptions->strlistptr[i],"%s",str);
+	    st++;
+            printf_params("[LIBCONFIG] %s%i: %s\n", cfgpath,i,cfgoptions->strlistptr[i]);
+       }
+   }
+   cfgoptions->numelt=numelt;
+   return st;
 }
 
-int read_intarray(paramdef_t *cfgoptions,config_setting_t *setting, char *cfgpath) {
-  cfgoptions->numelt=config_setting_length(setting);
+int read_intarray(paramdef_t *cfgoptions,config_setting_t *setting, char *cfgpath)
+{
 
-  if (cfgoptions->numelt > 0) {
-    cfgoptions->iptr=malloc(sizeof(int) * (cfgoptions->numelt));
-
-    for (int i=0; i< cfgoptions->numelt && cfgoptions->iptr != NULL; i++) {
-      cfgoptions->iptr[i]=config_setting_get_int_elem(setting,i);
-      printf_params("[LIBCONFIG] %s[%i]: %i\n", cfgpath,i,cfgoptions->iptr[i]);
-    } /* for loop on array element... */
-  }
-
-  return cfgoptions->numelt;
+   cfgoptions->numelt=config_setting_length(setting);
+   
+   if (cfgoptions->numelt > 0) {
+       cfgoptions->iptr=malloc(sizeof(int) * (cfgoptions->numelt));
+       for (int i=0; i< cfgoptions->numelt && cfgoptions->iptr != NULL; i++) {
+            cfgoptions->iptr[i]=config_setting_get_int_elem(setting,i);
+            printf_params("[LIBCONFIG] %s[%i]: %i\n", cfgpath,i,cfgoptions->iptr[i]);
+       } /* for loop on array element... */
+   }
+   return cfgoptions->numelt;
 }
 
 
 
 
-int config_libconfig_get(paramdef_t *cfgoptions,int numoptions, char *prefix ) {
+int config_libconfig_get(paramdef_t *cfgoptions,int numoptions, char *prefix )
+{
   config_setting_t *setting;
   char *str;
   int i,u;
   long long int llu;
-  double dbl;
+  double dbl; 
   int rst;
   int status=0;
   int notfound;
@@ -104,244 +104,211 @@ int config_libconfig_get(paramdef_t *cfgoptions,int numoptions, char *prefix ) {
   int numdefvals=0;
   char cfgpath[512];  /* 512 should be enough for the sprintf below */
 
-  for(i=0; i<numoptions; i++) {
-    if (prefix != NULL) {
-      sprintf(cfgpath,"%s.%s",prefix,cfgoptions[i].optname);
-    } else {
-      sprintf(cfgpath,"%s",cfgoptions[i].optname);
-    }
+  for(i=0;i<numoptions;i++) {
 
-    if( (cfgoptions->paramflags & PARAMFLAG_DONOTREAD) != 0) {
-      printf_params("[LIBCONFIG] %s.%s ignored\n", cfgpath,cfgoptions[i].optname );
-      continue;
-    }
-
-    notfound=0;
-    defval=0;
-
-    switch(cfgoptions[i].type) {
-      case TYPE_STRING:
-        if ( config_lookup_string(&(libconfig_privdata.cfg),cfgpath, (const char **)&str)) {
-          if ( cfgoptions[i].numelt > 0  && str != NULL && strlen(str) >= cfgoptions[i].numelt ) {
-            fprintf(stderr,"[LIBCONFIG] %s:  %s exceeds maximum length of %i bytes, value truncated\n",
-                    cfgpath,str,cfgoptions[i].numelt);
-            str[strlen(str)-1] = 0;
-          }
-
-          if (cfgoptions[i].numelt == 0 ) {
-            //          config_check_valptr(&(cfgoptions[i]), (char **)(&(cfgoptions[i].strptr)), sizeof(char *));
-            config_check_valptr(&(cfgoptions[i]), cfgoptions[i].strptr, strlen(str)+1);
-            sprintf( *(cfgoptions[i].strptr) , "%s", str);
-            printf_params("[LIBCONFIG] %s: \"%s\"\n", cfgpath,*(cfgoptions[i].strptr) );
-          } else {
-            sprintf( (char *)(cfgoptions[i].strptr) , "%s", str);
-            printf_params("[LIBCONFIG] %s: \"%s\"\n", cfgpath,(char *)cfgoptions[i].strptr );
-          }
-        } else {
-          defval=config_setdefault_string(&(cfgoptions[i]),prefix);
-        }
+     if (prefix != NULL) {
+         sprintf(cfgpath,"%s.%s",prefix,cfgoptions[i].optname);
+     } else {
+         sprintf(cfgpath,"%s",cfgoptions[i].optname);
+     }
 
+     if( (cfgoptions->paramflags & PARAMFLAG_DONOTREAD) != 0) {
+         printf_params("[LIBCONFIG] %s.%s ignored\n", cfgpath,cfgoptions[i].optname );
+         continue;
+     }
+     notfound=0;
+     defval=0;
+     switch(cfgoptions[i].type)
+       {
+       	case TYPE_STRING:
+           if ( config_lookup_string(&(libconfig_privdata.cfg),cfgpath, (const char **)&str)) {
+              if ( cfgoptions[i].numelt > 0  && str != NULL && strlen(str) >= cfgoptions[i].numelt ) {
+                  fprintf(stderr,"[LIBCONFIG] %s:  %s exceeds maximum length of %i bytes, value truncated\n",
+                           cfgpath,str,cfgoptions[i].numelt); 
+                  str[strlen(str)-1] = 0;
+              }
+              if (cfgoptions[i].numelt == 0 ) {
+        //          config_check_valptr(&(cfgoptions[i]), (char **)(&(cfgoptions[i].strptr)), sizeof(char *));
+                  config_check_valptr(&(cfgoptions[i]), cfgoptions[i].strptr, strlen(str)+1);
+                  sprintf( *(cfgoptions[i].strptr) , "%s", str);
+                  printf_params("[LIBCONFIG] %s: \"%s\"\n", cfgpath,*(cfgoptions[i].strptr) );
+              } else {
+                 sprintf( (char *)(cfgoptions[i].strptr) , "%s", str);
+                 printf_params("[LIBCONFIG] %s: \"%s\"\n", cfgpath,(char *)cfgoptions[i].strptr );
+              }
+           } else {
+              defval=config_setdefault_string(&(cfgoptions[i]),prefix); 
+	   }
+       break;
+       	case TYPE_STRINGLIST:
+	   setting = config_setting_lookup (config_root_setting(&(libconfig_privdata.cfg)),cfgpath );
+           if ( setting != NULL) {
+              read_strlist(&cfgoptions[i],setting,cfgpath);
+           } else {
+              defval=config_setdefault_stringlist(&(cfgoptions[i]),prefix);
+	   }
+       break;
+       	case TYPE_UINT8:
+       	case TYPE_INT8:	
+       	case TYPE_UINT16:
+       	case TYPE_INT16:
+       	case TYPE_UINT32:
+       	case TYPE_INT32:
+       	case TYPE_MASK:	
+           if ( config_lookup_int(&(libconfig_privdata.cfg),cfgpath, &u)) {
+              config_check_valptr(&(cfgoptions[i]), (char **)(&(cfgoptions[i].iptr)),sizeof(int32_t));
+	      config_assign_int(&(cfgoptions[i]),cfgpath,u);
+           } else {
+              defval=config_setdefault_int(&(cfgoptions[i]),prefix);
+	   }	      
         break;
-
-      case TYPE_STRINGLIST:
-        setting = config_setting_lookup (config_root_setting(&(libconfig_privdata.cfg)),cfgpath );
-
-        if ( setting != NULL) {
-          read_strlist(&cfgoptions[i],setting,cfgpath);
-        } else {
-          defval=config_setdefault_stringlist(&(cfgoptions[i]),prefix);
-        }
-
+       	case TYPE_UINT64:
+       	case TYPE_INT64:
+           if ( config_lookup_int64(&(libconfig_privdata.cfg),cfgpath, &llu)) {
+              config_check_valptr(&(cfgoptions[i]), (char **)&(cfgoptions[i].i64ptr),sizeof(long long));
+              if(cfgoptions[i].type==TYPE_UINT64) {
+                 *(cfgoptions[i].u64ptr) = (uint64_t)llu;
+                 printf_params("[LIBCONFIG] %s: %llu\n", cfgpath,(long long unsigned)(*(cfgoptions[i].u64ptr)) );
+              } else {
+                 *(cfgoptions[i].iptr) = llu;
+                 printf_params("[LIBCONFIG] %s: %lli\n", cfgpath,(long long unsigned)(*(cfgoptions[i].i64ptr)) ); 
+              }
+           } else {
+              defval=config_setdefault_int64(&(cfgoptions[i]),prefix);
+	   }	      
+        break;        
+       	case TYPE_UINTARRAY:
+       	case TYPE_INTARRAY:
+	   setting = config_setting_lookup (config_root_setting(&(libconfig_privdata.cfg)),cfgpath );
+           if ( setting != NULL) {
+              read_intarray(&cfgoptions[i],setting,cfgpath);
+           } else {
+              defval=config_setdefault_intlist(&(cfgoptions[i]),prefix);
+	   }    
         break;
-
-      case TYPE_UINT8:
-      case TYPE_INT8:
-      case TYPE_UINT16:
-      case TYPE_INT16:
-      case TYPE_UINT32:
-      case TYPE_INT32:
-      case TYPE_MASK:
-        if ( config_lookup_int(&(libconfig_privdata.cfg),cfgpath, &u)) {
-          config_check_valptr(&(cfgoptions[i]), (char **)(&(cfgoptions[i].iptr)),sizeof(int32_t));
-          config_assign_int(&(cfgoptions[i]),cfgpath,u);
-        } else {
-          defval=config_setdefault_int(&(cfgoptions[i]),prefix);
-        }
-
+       	case TYPE_DOUBLE:
+           if ( config_lookup_float(&(libconfig_privdata.cfg),cfgpath, &dbl)) {
+                 config_check_valptr(&(cfgoptions[i]), (char **)&(cfgoptions[i].dblptr),sizeof(double));
+                 *(cfgoptions[i].dblptr) = dbl;
+                 printf_params("[LIBCONFIG] %s: %lf\n", cfgpath,*(cfgoptions[i].dblptr) );
+           } else {
+              defval=config_setdefault_double(&(cfgoptions[i]),prefix);
+	   }	      
+        break;  
+       	case TYPE_IPV4ADDR:
+           if ( !config_lookup_string(&(libconfig_privdata.cfg),cfgpath, (const char **)&str)) {
+              defval=config_setdefault_ipv4addr(&(cfgoptions[i]),prefix);
+	   } else {
+              rst=config_assign_ipv4addr(cfgoptions, str);
+	      if (rst < 0) {
+		 fprintf(stderr,"[LIBCONFIG] %s not valid for %s \n", str, cfgpath);
+                 fatalerror=1;
+              }
+           }  
         break;
-
-      case TYPE_UINT64:
-      case TYPE_INT64:
-        if ( config_lookup_int64(&(libconfig_privdata.cfg),cfgpath, &llu)) {
-          config_check_valptr(&(cfgoptions[i]), (char **)&(cfgoptions[i].i64ptr),sizeof(long long));
-
-          if(cfgoptions[i].type==TYPE_UINT64) {
-            *(cfgoptions[i].u64ptr) = (uint64_t)llu;
-            printf_params("[LIBCONFIG] %s: %llu\n", cfgpath,(long long unsigned)(*(cfgoptions[i].u64ptr)) );
-          } else {
-            *(cfgoptions[i].iptr) = llu;
-            printf_params("[LIBCONFIG] %s: %llu\n", cfgpath,(long long unsigned)(*(cfgoptions[i].i64ptr)) );
-          }
-        } else {
-          defval=config_setdefault_int64(&(cfgoptions[i]),prefix);
-        }
-
-        break;
-
-      case TYPE_UINTARRAY:
-      case TYPE_INTARRAY:
-        setting = config_setting_lookup (config_root_setting(&(libconfig_privdata.cfg)),cfgpath );
-
-        if ( setting != NULL) {
-          read_intarray(&cfgoptions[i],setting,cfgpath);
-        } else {
-          defval=config_setdefault_intlist(&(cfgoptions[i]),prefix);
-        }
-
-        break;
-
-      case TYPE_DOUBLE:
-        if ( config_lookup_float(&(libconfig_privdata.cfg),cfgpath, &dbl)) {
-          config_check_valptr(&(cfgoptions[i]), (char **)&(cfgoptions[i].dblptr),sizeof(double));
-          *(cfgoptions[i].dblptr) = dbl;
-          printf_params("[LIBCONFIG] %s: %lf\n", cfgpath,*(cfgoptions[i].dblptr) );
-        } else {
-          defval=config_setdefault_double(&(cfgoptions[i]),prefix);
-        }
-
-        break;
-
-      case TYPE_IPV4ADDR:
-        if ( !config_lookup_string(&(libconfig_privdata.cfg),cfgpath, (const char **)&str)) {
-          defval=config_setdefault_ipv4addr(&(cfgoptions[i]),prefix);
-        } else {
-          rst=config_assign_ipv4addr(cfgoptions, str);
-
-          if (rst < 0) {
-            fprintf(stderr,"[LIBCONFIG] %s not valid for %s \n", str, cfgpath);
+       	case TYPE_LIST:
+	   setting = config_setting_lookup (config_root_setting(&(libconfig_privdata.cfg)),cfgpath );
+           if ( setting) {
+              cfgoptions[i].numelt=config_setting_length(setting);
+           } else {
+              notfound=1;
+	   }
+       break;
+       default:
+            fprintf(stderr,"[LIBCONFIG] %s type %i  not supported\n", cfgpath,cfgoptions[i].type);
             fatalerror=1;
-          }
-        }
-
-        break;
-
-      case TYPE_LIST:
-        setting = config_setting_lookup (config_root_setting(&(libconfig_privdata.cfg)),cfgpath );
-
-        if ( setting) {
-          cfgoptions[i].numelt=config_setting_length(setting);
-        } else {
-          notfound=1;
-        }
-
-        break;
-
-      default:
-        fprintf(stderr,"[LIBCONFIG] %s type %i  not supported\n", cfgpath,cfgoptions[i].type);
-        fatalerror=1;
-        break;
-    } /* switch on param type */
-
+       break;
+       } /* switch on param type */
     if( notfound == 1) {
-      printf("[LIBCONFIG] %s not found in %s ", cfgpath,libconfig_privdata.configfile );
-
-      if ( (cfgoptions[i].paramflags & PARAMFLAG_MANDATORY) != 0) {
-        fatalerror=1;
-        printf("  mandatory parameter missing\n");
-      } else {
-        printf("\n");
-      }
+        printf("[LIBCONFIG] %s not found in %s ", cfgpath,libconfig_privdata.configfile );
+        if ( (cfgoptions[i].paramflags & PARAMFLAG_MANDATORY) != 0) {
+            fatalerror=1;
+            printf("  mandatory parameter missing\n");
+        } else {
+           printf("\n");
+        }
     } else {
       if (defval == 1) {
-        numdefvals++;
-        cfgoptions[i].paramflags = cfgoptions[i].paramflags |  PARAMFLAG_PARAMSETDEF;
+          numdefvals++;
+	  cfgoptions[i].paramflags = cfgoptions[i].paramflags |  PARAMFLAG_PARAMSETDEF;
       } else {
-        cfgoptions[i].paramflags = cfgoptions[i].paramflags |  PARAMFLAG_PARAMSET;
+          cfgoptions[i].paramflags = cfgoptions[i].paramflags |  PARAMFLAG_PARAMSET;
       }
-
       status++;
     }
   } /* for loop on options */
-
   printf("[LIBCONFIG] %s: %i/%i parameters successfully set, (%i to default value)\n",
-         ((prefix == NULL)?"(root)":prefix),
+         ((prefix == NULL)?"(root)":prefix), 
          status,numoptions,numdefvals );
-
   if (fatalerror == 1) {
-    fprintf(stderr,"[LIBCONFIG] fatal errors found when processing  %s \n", libconfig_privdata.configfile );
-    config_libconfig_end();
-    end_configmodule();
+      fprintf(stderr,"[LIBCONFIG] fatal errors found when processing  %s \n", libconfig_privdata.configfile );
+      config_libconfig_end();
+      end_configmodule();
   }
-
   return status;
 }
 
-int config_libconfig_getlist(paramlist_def_t *ParamList,
-                             paramdef_t *params, int numparams, char *prefix) {
-  config_setting_t *setting;
-  int i,j,status;
-  char *listpath=NULL;
-  char cfgpath[MAX_OPTNAME_SIZE*2 + 6]; /* prefix.listname.[listindex] */
+int config_libconfig_getlist(paramlist_def_t *ParamList, 
+                                   paramdef_t *params, int numparams, char *prefix)
+{
+config_setting_t *setting;
+int i,j,status;
+char *listpath=NULL;
+char cfgpath[MAX_OPTNAME_SIZE*2 + 6]; /* prefix.listname.[listindex] */
 
-  if (prefix != NULL) {
-    i=asprintf(&listpath ,"%s.%s",prefix,ParamList->listname);
-  } else {
-    i=asprintf(&listpath ,"%s",ParamList->listname);
-  }
-
-  setting = config_lookup(&(libconfig_privdata.cfg), listpath);
-
-  if ( setting) {
-    status = ParamList->numelt = config_setting_length(setting);
-    printf_params("[LIBCONFIG] %i %s in config file %s \n",
-                  ParamList->numelt,listpath,libconfig_privdata.configfile );
-  } else {
-    printf("[LIBCONFIG] list %s not found in config file %s \n",
-           listpath,libconfig_privdata.configfile );
-    ParamList->numelt= 0;
-    status = -1;
-  }
-
-  if (ParamList->numelt > 0 && params != NULL) {
-    ParamList->paramarray = malloc(ParamList->numelt * sizeof(paramdef_t *));
-
-    if ( ParamList->paramarray != NULL) {
-      config_get_if()->ptrs[config_get_if()->numptrs] = (char *)(ParamList->paramarray);
-      config_get_if()->numptrs++;
+    if (prefix != NULL)
+        {
+        i=asprintf(&listpath ,"%s.%s",prefix,ParamList->listname);
+        }
+    else
+        {
+        i=asprintf(&listpath ,"%s",ParamList->listname);
+        }
+    setting = config_lookup(&(libconfig_privdata.cfg), listpath);
+    if ( setting) {
+        status = ParamList->numelt = config_setting_length(setting);
+        printf_params("[LIBCONFIG] %i %s in config file %s \n", 
+               ParamList->numelt,listpath,libconfig_privdata.configfile );
     } else {
-      fprintf (stderr,"[LIBCONFIG] %s %d malloc error\n",__FILE__, __LINE__);
-      exit(-1);
+        printf("[LIBCONFIG] list %s not found in config file %s \n", 
+               listpath,libconfig_privdata.configfile );
+        ParamList->numelt= 0;
+        status = -1;
     }
-
-    for (i=0 ; i < ParamList->numelt ; i++) {
-      ParamList->paramarray[i] = malloc(numparams * sizeof(paramdef_t));
-
-      if ( ParamList->paramarray[i] != NULL) {
-        config_get_if()->ptrs[config_get_if()->numptrs] = (char *)(ParamList->paramarray[i]);
-        config_get_if()->numptrs++;
-      } else {
-        fprintf (stderr,"[LIBCONFIG] %s %d malloc error\n",__FILE__, __LINE__);
-        exit(-1);
-      }
-
-      memcpy(ParamList->paramarray[i], params, sizeof(paramdef_t)*numparams);
-
-      for (j=0; j<numparams; j++) {
-        ParamList->paramarray[i][j].strptr = NULL ;
-      }
-
-      sprintf(cfgpath,"%s.[%i]",listpath,i);
-      config_libconfig_get(ParamList->paramarray[i], numparams, cfgpath );
-    } /* for i... */
-  } /* ParamList->numelt > 0 && params != NULL */
-
-  if (listpath != NULL)
-    free(listpath);
-
-  return status;
+    if (ParamList->numelt > 0 && params != NULL) {
+        ParamList->paramarray = malloc(ParamList->numelt * sizeof(paramdef_t *));
+        if ( ParamList->paramarray != NULL) {
+             config_get_if()->ptrs[config_get_if()->numptrs] = (char *)(ParamList->paramarray); 
+             config_get_if()->numptrs++;
+        } else {
+             fprintf (stderr,"[LIBCONFIG] %s %d malloc error\n",__FILE__, __LINE__);
+             exit(-1);
+        }
+        for (i=0 ; i < ParamList->numelt ; i++) {
+            ParamList->paramarray[i] = malloc(numparams * sizeof(paramdef_t));
+            if ( ParamList->paramarray[i] != NULL) {
+                 config_get_if()->ptrs[config_get_if()->numptrs] = (char *)(ParamList->paramarray[i]); 
+                 config_get_if()->numptrs++;
+            } else {
+                 fprintf (stderr,"[LIBCONFIG] %s %d malloc error\n",__FILE__, __LINE__);
+                 exit(-1);
+            }
+            
+            memcpy(ParamList->paramarray[i], params, sizeof(paramdef_t)*numparams);
+            for (j=0;j<numparams;j++) {
+                ParamList->paramarray[i][j].strptr = NULL ;
+                } 
+            sprintf(cfgpath,"%s.[%i]",listpath,i);
+            config_libconfig_get(ParamList->paramarray[i], numparams, cfgpath );
+        } /* for i... */
+    } /* ParamList->numelt > 0 && params != NULL */
+    if (listpath != NULL)
+        free(listpath);
+    return status;
 }
 
-int config_libconfig_init(char *cfgP[], int numP) {
+int config_libconfig_init(char *cfgP[], int numP)
+{
   config_init(&(libconfig_privdata.cfg));
   libconfig_privdata.configfile = strdup((char *)cfgP[0]);
   config_get_if()->numptrs=0;
@@ -350,22 +317,24 @@ int config_libconfig_init(char *cfgP[], int numP) {
   /* Read the file. If there is an error, report it and exit. */
   if(! config_read_file(&(libconfig_privdata.cfg), libconfig_privdata.configfile)) {
     fprintf(stderr,"[LIBCONFIG] %s %d file %s - %d - %s\n",__FILE__, __LINE__,
-            libconfig_privdata.configfile, config_error_line(&(libconfig_privdata.cfg)),
-            config_error_text(&(libconfig_privdata.cfg)));
+                   libconfig_privdata.configfile, config_error_line(&(libconfig_privdata.cfg)),
+                   config_error_text(&(libconfig_privdata.cfg)));
     config_destroy(&(libconfig_privdata.cfg));
     printf( "\n");
     return -1;
   }
+  
 
   return 0;
 }
 
 
-void config_libconfig_end(void ) {
+void config_libconfig_end(void )
+{
   config_destroy(&(libconfig_privdata.cfg));
-
   if ( libconfig_privdata.configfile != NULL ) {
-    free(libconfig_privdata.configfile);
-    libconfig_privdata.configfile=NULL;
-  }
+     free(libconfig_privdata.configfile);
+     libconfig_privdata.configfile=NULL;
+  } 
+  
 }

common/ran_context.h

@@ -42,8 +42,6 @@
 #include "RRC/LTE/rrc_defs.h"
 #include "flexran_agent_defs.h"
 
-//#include "openair2/COMMON/messages_def.h"
-
 #include "gtpv1u.h"
 #include "NwGtpv1u.h"
 #include "NwGtpv1uMsg.h"

common/utils/DOC/loader.md

@@ -1,17 +0,0 @@
-# OAI shared library loader
-
-Shared libraries usage is modularization mechanism which provides the following advantages:
-1. Prevents including in the main executable code which is not used in a given configuration
-1. Provides flexibility, several implementation of a given functionality can be chosen at run-time, without any compilation step. For example you can build several devices (USRP, BladeFR, LimeSDR)  and choose which one you want to use on the command line or via the configuration.
-1.  Makes code evolution easier: as soon as the shared library interface is clearly defined, you can work on the functionality implemented in a shared library while regularly updating the other components of the code. You can decide to develop your own version of a functionality, decide to deliver it or not,  letting the user decide wwhat version he wants to use.
-
-The main drawback is a performance cost at init time, when loading libraries.
-
-
-## Documentation
-
-* [runtime usage](loader/rtusage.md)
-* [developer usage](loader/devusage.md)
-* [module architecture](loader/arch.md)
-
-[oai Wikis home](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home)

common/utils/DOC/loader/arch.md

@@ -1,7 +0,0 @@
-# loader source files
-
-The oai shared library loader is implemented in two source files, located in [common/utils](https://gitlab.eurecom.fr/oai/openairinterface5g/tree/develop/common/utils)
-1. [load_module_shlib.c](https://gitlab.eurecom.fr/oai/openairinterface5g/tree/develop/common/utils/load_module_shlib.c) contains the loader implementation
-1.  [load_module_shlib.h](https://gitlab.eurecom.fr/oai/openairinterface5g/tree/develop/common/utils/load_module_shlib.h) is the loader include file containing both private and public data type definitions. It also contain API prototypes.  
-
-[loader home page](../loader.md)

common/utils/DOC/loader/devusage.md

@@ -1,16 +0,0 @@
-The loader objectives are 
-1. provides a common mechanism to prevent an executable to include code that is only used under specific configurations, without rebuilding the code
-1. Provide a common mechanism to allow to choose between different implementations of a given set of functions, without rebuilding the code
-
-As a developer you may need to look at these sections:
-
-* [loading a shared library](devusage/loading.md)
-* [loader API](devusage/api.md) 
-* [loader public structures](devusage/struct.md)  
-
-Loader usage examples can be found in oai sources:  
-
-*  device and transport initialization code: [function `load_lib` in *targets/ARCH/COMMON/__common_lib.c__* ](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/targets/ARCH/COMMON/common_lib.c#L91) 
-*  turbo encoder and decoder initialization: [function `load_codinglib`in *openair1/PHY/CODING/__coding_load.c__*](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/openair1/PHY/CODING/coding_load.c#L113)
-
-[loader home page](../loader.md)