-M2AP ASN.1 Abstract Syntax Notation

-Initial Common M2AP (ETSI TS 136 443 v.14) defs

.gitignore

@@ -6,6 +6,3 @@ log/
 lte_build_oai/
 targets/bin/
 cmake_targets/nas_sim_tools/build/
-
-# vscode
-.vscode

CHANGELOG.md

@@ -1,100 +0,0 @@
-# RELEASE NOTES: #
-
-## [v1.2.2](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.2.2) -> August 2020. ##
-
-* Bug fix for supporting multi-antennas in RF simulator
-
-## [v1.2.1](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.2.1) -> February 2020. ##
-
-* Bug fix for mutex lock for wake-up signal
-
-## [v1.2.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.2.0) -> January 2020. ##
-
-This version adds the following implemented features:
-
-* LTE-M : eNB support for Mode A repetitions
-  - PUSCH CE - 8 Repetitions
-* Improved CDRX implementation for monolithic eNB
-* Experimental eMBMS support (now also on eNB side)
-* Experimental MCE - Multicast Coordination Entity
-* Bug fixes
-
-This version also has an improved code quality:
-
-* Better Test Coverage in Continuous Integration:
-  - Initial framework to do long-run testing at R2LAB
-
-## [v1.1.1](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.1.1) -> November 2019. ##
-
-- Bug fix in the TDD Fair Round-Robin scheduler
-
-## [v1.1.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.1.0) -> July 2019. ##
-
-This version adds the following implemented features:
-
-* Experimental support of LTE-M
-  - Single LTE-M UE attachment, legacy-LTE UE attachment is disabled
-* X2 interface and handover (also X2-U interface)
-  - In FDD and TDD
-* CU/DU split (F1 interface)
-  - Tested only in FDD
-* CDRX
-  - Tested only in FDD
-* Experimental eMBMS support (only on UE side)
-* Experimental multi-RRU support
-  - Tested only in TDD
-
-This version has an improved code quality:
-
-* Simplification of the Build System
-  - A single build includes all full-stack simulators, S1/noS1 modes and one HW platform (such as USRP, BladeRF, ...)
-* TUN interface is now used as default for the data plane
-  - for UE, eNB-noS1 and UE-noS1
-* Code Cleanup
-* Better Static Code Analysis:
-  - Limited number of errors in cppcheck
-  - Important Decrease on high Impact errors in CoverityScan
-* Better Test Coverage in Continuous Integration:
-  - TM2, CDRX, IF4.5, F1
-  - OAI UE is tested in S1 and noS1 modes with USRP board
-  - Multi-RRU TDD mode
-  - X2 Handover in FDD mode
-
-## [v1.0.3](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.0.3) -> June 2019. ##
-
-- Bug fix for LimeSuite v19.04.0 API
-
-## [v1.0.2](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.0.2) -> February 2019. ##
-
-- Full OAI support for 3.13.1 UHD
-
-## [v1.0.1](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.0.1) -> February 2019. ##
-
-- Bug fix for the UE L1 simulator.
-
-## [v1.0.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v1.0.0) -> January 2019. ##
-
-This version first implements the architectural split described in the following picture.
-
-![Block Diagram](./doc/images/oai_lte_enb_func_split_arch.png)
-
-* Only FAPI, nFAPI and IF4.5 interfaces are implemented.
-* Repository tree structure prepares future integrations of features such as LTE-M, nbIOT or 5G-NR.
-* Preliminary X2 support has been implemented.
-* S1-flex has been introduced.
-* New tools: config library, telnet server, ...
-* A lot of bugfixes and a proper automated Continuous Integration process validates contributions.
-
-Old Releases:
-
-* v0.6.1 -> Mostly bugfixes. This is the last version without NFAPI.
-* v0.6 -> RRH functionality, UE greatly improved, better TDD support, a lot of bugs fixed.
-  - WARNING: oaisim in PHY abstraction mode does not work, you need to use v0.5.2 for that.
-* v0.5.2 -> Last version with old code for oaisim (abstraction mode works)
-* v0.5.1 -> Merge of bugfix-137-uplink-fixes. It includes stablity fixes for eNB
-* v0.5 -> Merge of enhancement-10-harmony-lts. It includes fixes for Ubuntu 16.04 support
-* v0.4 -> Merge of feature-131-new-license. It closes issue#131 and changes the license to OAI Public License V1.0
-* v0.3 -> Last stable commit on develop branch before the merge of feature-131-new-license. This is the last commit with GPL License
-* v0.2 -> Merge of enhancement-10-harmony to include NGFI RRH + New Interface for RF/BBU
-* v0.1 -> Last stable commit on develop branch before enhancement-10-harmony
-

CONTRIBUTING.md

@@ -1,24 +0,0 @@
-# Contributing to OpenAirInterface #
-
-We want to make contributing to this project as easy and transparent as possible.
-
-Please refer to the steps described on our website: [How to contribute to OAI](https://www.openairinterface.org/?page_id=112)
-
-1. Sign and return a Contributor License Agreement to OAI team.
-2. We recommend that you provide us with a professional or student email address 
-2. Register on [Eurecom GitLab Server](https://gitlab.eurecom.fr/users/sign_in)
-3. Provide the OAI team with the **username** of this account to (mailto:contact@openairinterface.org) ; we will give you the developer rights on this repository.
-4. The policies are described in these wiki pages: [OAI Policies](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/oai-policies-home)
-   -  PLEASE DO NOT FORK the OAI repository on your own Eurecom GitLab account. It just eats up space on our servers.
-   - You can fork onto another hosting system. But we will NOT accept a merge request from a forked repository.
-      * This decision was made for the license reasons.
-      * The Continuous Integration will reject your merge request.
-   - All merge requests SHALL have `develop` branch as target branch.
-
-## Coding Styles ##
-
-There are described [here](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/guidelines/guidelines-home)
-
-## License ##
-
-By contributing to OpenAirInterface, you agree that your contributions will be licensed under the LICENSE file in the root directory of this source tree.

NOTICE.md

@@ -1,23 +0,0 @@
-The source code of openairinterface5g is distributed under **OAI Public License V1.1**.
-
-For more details of the license, refer to [LICENSE](LICENSE) file in the same directory.
-
-However, the source code also contains third party software that is acknowledged here for reference.
-
-## Credits for LFDS user space source code located in folder openair2/UTILS/LFDS/ ##
-
-See on [liblfds website](https://liblfds.org/) the license section.
-
-<pre>
-"There is no license. You are free to use this software in any way, for any purpose. Go forth and create wealth!
-If however for legal reasons a licence is required, the license of your choice will be granted."
-</pre>
-
-## Credits for source code common/utils/collection/queue.h: ##
-
-The Regents of the University of California: BSD 3-Clause Licence.
-
-## Credits for source code common/utils/collection/tree.h: ##
-
-Niels Provos <provos@citi.umich.edu>: BSD 2-Clause Licence.
-

NOTICE.txt

@@ -0,0 +1,21 @@
+The source code of openairinterface5g is distributed under OAI Public License V1.0. 
+For more details of the license, refer to LICENSE file in the same directory.
+
+However, the source code also contains third party software that is acknowledged here for reference.
+
+Credits for LFDS user space source code located in folder openair2/UTILS/LFDS/liblfds6.1.1/
+http://liblfds.org/.
+Extract from http://liblfds.org/pages/downloads_and_license.html:
+"There is no license. You are free to use this software in any way, for any purpose. Go forth and create wealth!
+If however for legal reasons a licence is required, the license of your choice will be granted."
+
+
+Credits for source code common/utils/collection/queue.h:
+The Regents of the University of California: BSD 3-Clause Licence.
+
+
+Credits for source code common/utils/collection/tree.h:
+Niels Provos <provos@citi.umich.edu>: BSD 2-Clause Licence.
+
+
+

README.md

@@ -1,59 +0,0 @@
-# OpenAirInterface License #
-
-OpenAirInterface is under OpenAirInterface Software Alliance license.
-
- *  [OAI License Model](http://www.openairinterface.org/?page_id=101)
- *  [OAI License v1.1 on our website](http://www.openairinterface.org/?page_id=698)
-
-It is distributed under **OAI Public License V1.1**.
-
-The license information is distributed under [LICENSE](LICENSE) file in the same directory.
-
-Please see [NOTICE](NOTICE.md) file for third party software that is included in the sources.
-
-# Where to Start #
-
- *  [How to build](./doc/BUILD.md)
- *  [How to run the modems](./doc/RUNMODEM.md)
-
-# RAN repository structure #
-
-The OpenAirInterface (OAI) software is composed of the following parts: 
-
-<pre>
-openairinterface5g
-├── ci-scripts: Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
-├── cmake_targets: Build utilities to compile (simulation, emulation and real-time platforms), and generated build files
-├── common : Some common OAI utilities, other tools can be found at openair2/UTILS
-├── doc : Contains an up-to-date feature set list
-├── LICENSE
-├── maketags : Script to generate emacs tags
-├── nfapi : Contains the NFAPI code. A local Readme file provides more details.
-├── openair1 : 3GPP LTE Rel-10/12 PHY layer + PHY RF simulation. A local Readme file provides more details.
-├── openair2 : 3GPP LTE Rel-10 RLC/MAC/PDCP/RRC/X2AP + LTE Rel-14 M2AP implementation.
-    ├── COMMON
-    ├── DOCS
-    ├── ENB_APP
-    ├── LAYER2/RLC/ with the following subdirectories: UM_v9.3.0, TM_v9.3.0, and AM_v9.3.0. 
-    ├── LAYER2/PDCP/PDCP_v10.1.0.
-    ├── NETWORK_DRIVER
-    ├── PHY_INTERFACE
-    ├── RRC/LITE
-    ├── UTIL
-    ├── X2AP
-    ├── M2AP
-    ├── MCE_APP
-├── openair3: 3GPP LTE Rel10 for S1AP, NAS GTPV1-U for both ENB and UE.
-    ├── COMMON
-    ├── DOCS
-    ├── GTPV1-U
-    ├── NAS
-    ├── S1AP
-    ├── M3AP
-    ├── SCTP
-    ├── SECU
-    ├── UDP
-    ├── UTILS
-└── targets: Top-level wrappers for unitary simulation for PHY channels, system-level emulation (eNB-UE with and without S1), and realtime eNB and UE and RRH GW.
-</pre>
-

README.txt

@@ -0,0 +1,65 @@
+OpenAirInterface is under OpenAirInterface Software Alliance license.
+├── http://www.openairinterface.org/?page_id=101
+├── http://www.openairinterface.org/?page_id=698
+
+It is distributed under OAI Public License V1.0. 
+The license information is distributed under LICENSE file in the same directory.
+Please see NOTICE.txt for third party software that is included in the sources.
+
+The OpenAirInterface (OAI) software is composed of the following parts: 
+
+openairinterface5g
+├── ci-scripts: Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
+├── cmake_targets: Build utilities to compile (simulation, emulation and real-time platforms), and generated build files
+├── common : Some common OAI utilities, other tools can be found at openair2/UTILS
+├── doc : Contains an up-to-date feature set list
+├── LICENSE
+├── maketags : Script to generate emacs tags
+├── nfapi : Contains the NFAPI code. A local Readme file provides more details.
+├── openair1 : 3GPP LTE Rel-10/12 PHY layer + PHY RF simulation. A local Readme file provides more details.
+├── openair2 : 3GPP LTE Rel-10 RLC/MAC/PDCP/RRC/X2AP implementation.
+    ├── COMMON
+    ├── DOCS
+    ├── ENB_APP
+    ├── LAYER2/RLC/ with the following subdirectories: UM_v9.3.0, TM_v9.3.0, and AM_v9.3.0. 
+    ├── LAYER2/PDCP/PDCP_v10.1.0.
+    ├── NETWORK_DRIVER
+    ├── PHY_INTERFACE
+    ├── RRC/LITE
+    ├── UTIL
+    ├── X2AP
+├── openair3: 3GPP LTE Rel10 for S1AP, NAS GTPV1-U for both ENB and UE.
+    ├── COMMON
+    ├── DOCS
+    ├── GTPV1-U
+    ├── NAS
+    ├── S1AP
+    ├── SCTP
+    ├── SECU
+    ├── UDP
+    ├── UTILS
+└── targets: Top-level wrappers for unitary simulation for PHY channels, system-level emulation (eNB-UE with and without S1), and realtime eNB and UE and RRH GW.
+
+
+RELEASE NOTES:
+
+v0.1 -> Last stable commit on develop branch before enhancement-10-harmony
+v0.2 -> Merge of enhancement-10-harmony to include NGFI RRH + New Interface for RF/BBU
+v0.3 -> Last stable commit on develop branch before the merge of feature-131-new-license. This is the last commit with GPL License
+v0.4 -> Merge of feature-131-new-license. It closes issue#131 and changes the license to OAI Public License V1.0
+v0.5 -> Merge of enhancement-10-harmony-lts. It includes fixes for Ubuntu 16.04 support
+v0.5.1 -> Merge of bugfix-137-uplink-fixes. It includes stablity fixes for eNB
+v0.5.2 -> Last version with old code for oaisim (abstraction mode works)
+v0.6 -> RRH functionality, UE greatly improved, better TDD support,
+        a lot of bugs fixed. WARNING: oaisim in PHY abstraction mode does not
+        work, you need to use v0.5.2 for that.
+v0.6.1 -> Mostly bugfixes. This is the last version without NFAPI.
+v1.0.0 -> January 2019. This version first implements the architectural split described in doc/oai_lte_enb_func_split_arch.png picture.
+            Only FAPI, nFAPI and IF4.5 interfaces are implemented.
+            Repository tree structure prepares future integrations of features such as LTE-M, nbIOT or 5G-NR.
+            Preliminary X2 support has been implemented.
+            S1-flex has been introduced.
+            New tools: config library, telnet server, ...
+            A lot of bugfixes and a proper automated Continuous Integration process validates contributions.
+v1.0.1 -> February 2019: Bug fix for the UE L1 simulator.
+v1.0.2 -> February 2019: Full OAI support for 3.13.1 UHD

ci-scripts/.gitignore

@@ -1,7 +0,0 @@
-enb_*.log
-ue_*.log
-ping_*.*
-iperf_*.*
-phones_list.txt
-modules_list.txt
-test_results*.html

ci-scripts/Jenkinsfile-gitlab

@@ -44,7 +44,7 @@ pipeline {
         disableConcurrentBuilds()
         timestamps()
         gitLabConnection('OAI GitLab')
-        gitlabBuilds(builds: ["Build eNb-USRP", "Build basic-sim", "Build phy-sim", "Build eNb-ethernet", "Build UE-ethernet", "Analysis with cppcheck", "Test phy-sim", "Test basic-sim", "Test L2-sim", "Test-Mono-FDD-Band7", "Test-Mono-TDD-Band40", "Test-IF4p5-FDD-Band7", "Test-IF4p5-TDD-Band40", "Test-Mono-FDD-Band13", "Test-IF4p5-TDD-Band38-Multi-RRU" , "Test-Mono-FDD-Band13-X2-HO"])
+        gitlabBuilds(builds: ["Build eNb-USRP", "Build basic-sim", "Build phy-sim", "Build eNb-ethernet", "Build UE-ethernet", "Analysis with cppcheck", "Test phy-sim", "Test basic-sim", "Test L2-sim", "Test-Mono-FDD-Band7", "Test-Mono-TDD-Band40", "Test-IF4p5-FDD-Band7", "Test-IF4p5-TDD-Band40", "Test-Mono-FDD-Band13"])
         ansiColor('xterm')
     }
 
@@ -57,9 +57,6 @@ pipeline {
 
                     echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
                     def allParametersPresent = true
-                    if (env.TESTPLATFORM_OWNER) {
-                        echo "Platform is ${env.TESTPLATFORM_OWNER}"
-                    }
 
                     if (params.RedHatRemoteServer == null) {
                         allParametersPresent = false
@@ -131,8 +128,8 @@ pipeline {
                                 [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.FlexRanRtcGitLabRepository_Credentials}", usernameVariable: 'git_username', passwordVariable: 'git_password']
                                 ]) {
                                 sh "git clone https://${git_username}:${git_password}@gitlab.eurecom.fr/flexran/flexran-rtc.git . > ../git_clone.log 2>&1"
-                                sh "git checkout develop >> ../git_clone.log 2>&1"
                             }
+                            sh "sed -i -e 's#add-apt-repository.*cleishm.*neo4j#add-apt-repository ppa:cleishm/neo4j -y#' -e 's#libneo4j-client-dev#libneo4j-client-dev -y#' tools/install_dependencies"
                             sh "zip -r -qq flexran.zip ."
                         }
                     }
@@ -484,45 +481,6 @@ pipeline {
                         }
                     }
                 }
-                stage ("Test X2 Handover - FDD - Band 13 - B210") {
-                    steps {
-                        script {
-                            sh "sleep 60"
-                            triggerSlaveJob ('eNB-CI-MONO-FDD-Band13-X2HO-B210', 'Test-Mono-FDD-Band13-X2-HO')
-                        }
-                    }
-                    post {
-                        always {
-                            script {
-                                finalizeSlaveJob('eNB-CI-MONO-FDD-Band13-X2HO-B210')
-                            }
-                        }
-                        failure {
-                            script {
-                                currentBuild.result = 'FAILURE'
-                            }
-                        }
-                    }
-                }
-                stage ("Test IF4p5 - TDD - Band 38 - B210 - MultiRRU") {
-                    steps {
-                        script {
-                            triggerSlaveJob ('eNB-CI-IF4p5-TDD-Band38-MultiRRU-B210', 'Test-IF4p5-TDD-Band38-Multi-RRU')
-                        }
-                    }
-                    post {
-                        always {
-                            script {
-                                finalizeSlaveJob('eNB-CI-IF4p5-TDD-Band38-MultiRRU-B210')
-                            }
-                        }
-                        failure {
-                            script {
-                                currentBuild.result = 'FAILURE'
-                            }
-                        }
-                    }
-                }
                 stage ("Test IF4p5 - TDD - Band 40 - B210") {
                     steps {
                         script {
@@ -546,7 +504,6 @@ pipeline {
                 stage ("Test MONOLITHIC - FDD - Band 13 - B210") {
                     steps {
                         script {
-                            sh "sleep 60"
                             triggerSlaveJob ('eNB-CI-MONO-FDD-Band13-B210', 'Test-Mono-FDD-Band13')
                         }
                     }
@@ -680,50 +637,48 @@ OAI CI Team''',
 // ----  Slave Job functions
 
 def triggerSlaveJob (jobName, gitlabStatusName) {
-    // Workaround for the "cancelled" GitLab pipeline notification
-    // The slave job is triggered with the propagate false so the following commands are executed
-    // Its status is now PASS/SUCCESS from a stage pipeline point of view
-    // localStatus variable MUST be analyzed to properly assess the status
-    localStatus = build job: jobName,
-        parameters: [
-            string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-            string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
-            string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
-            booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
-            string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
-        ], propagate: false
-    localResult = localStatus.getResult()
-    echo "${jobName} Slave Job status is ${localResult}"
-    gitlabCommitStatus(name: gitlabStatusName) {
-        if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
-           echo "${jobName} Slave Job is OK"
-        } else {
-           echo "${jobName} Slave Job is KO"
-           sh "ci-scripts/fail.sh"
+    if ("MERGE".equals(env.gitlabActionType)) {
+        gitlabCommitStatus(name: gitlabStatusName) {
+            build job: jobName,
+                parameters: [
+                    string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                    string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                    string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                    booleanParam(name: 'eNB_mergeRequest', value: true),
+                    string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+                ]
         }
+    } else {
+        gitlabCommitStatus(name: gitlabStatusName) {
+            build job: jobName,
+                parameters: [
+                    string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                    string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                    string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                    booleanParam(name: 'eNB_mergeRequest', value: false)
+                ]
+       }
     }
 }
 
 def triggerSlaveJobNoGitLab (jobName) {
-    // Workaround for the "cancelled" GitLab pipeline notification
-    // The slave job is triggered with the propagate false so the following commands are executed
-    // Its status is now PASS/SUCCESS from a stage pipeline point of view
-    // localStatus variable MUST be analyzed to properly assess the status
-    localStatus = build job: jobName,
-        parameters: [
-            string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-            string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
-            string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
-            booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
-            string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
-        ], propagate: false
-    localResult = localStatus.getResult()
-    echo "${jobName} Slave Job status is ${localResult}"
-    if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
-       echo "${jobName} Slave Job is OK"
+    if ("MERGE".equals(env.gitlabActionType)) {
+        build job: jobName,
+            parameters: [
+                string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+                string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+                booleanParam(name: 'eNB_mergeRequest', value: true),
+                string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+            ]
     } else {
-       echo "${jobName} Slave Job is KO"
-       sh "ci-scripts/fail.sh"
+        build job: jobName,
+            parameters: [
+                string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+                string(name: 'eNB_Branch', value: String.valueOf(GIT_BRANCH)),
+                string(name: 'eNB_CommitID', value: String.valueOf(GIT_COMMIT)),
+                booleanParam(name: 'eNB_mergeRequest', value: false)
+            ]
     }
 }
 

ci-scripts/Jenkinsfile-inria-r2lab

@@ -1,421 +0,0 @@
-#!/bin/groovy
-/*
- * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The OpenAirInterface Software Alliance licenses this file to You under
- * the OAI Public License, Version 1.1  (the "License"); you may not use this file
- * except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.openairinterface.org/?page_id=698
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *-------------------------------------------------------------------------------
- * For more information about the OpenAirInterface (OAI) Software Alliance:
- *      contact@openairinterface.org
- */
-
-// Abstraction function to send social media messages:
-// like on Slack or Mattermost
-def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
-    if (params.pipelineUsesSlack != null) {
-        if (params.pipelineUsesSlack) {
-            slackSend channel: pipeChannel, color: pipeColor, message: pipeMessage
-        }
-    }
-}
-
-// Location of the test XML file to be run
-def testXMLFile = params.pythonTestXmlFile
-def mainPythonAllXmlFiles = ""
-def buildStageStatus = true
-
-// Name of the test stage
-def testStageName = params.pipelineTestStageName
-
-// Name of the branch to work on
-def ranRepoBranch = params.pythonWorkingBranch
-
-// Lease booking parameters
-def r2labStartTime = params.R2LAB_LeaseBookStartTime
-def r2labDuration = params.R2LAB_LeaseBookDuration
-
-
-// Fixed deployment
-def r2labBaseIpAddr = '192.168.3.'
-def r2labPythonExeIdx = '14'
-def r2labPythonExe = 'fit' + r2labPythonExeIdx
-def r2labENB0Idx = '23'
-def r2labENB0 = 'fit' + r2labENB0Idx
-def r2labENB0IpAddr = r2labBaseIpAddr + r2labENB0Idx
-def r2labEPC0Idx = '17'
-def r2labEPC0 = 'fit' + r2labEPC0Idx
-def r2labEPC0IpAddr = r2labBaseIpAddr + r2labEPC0Idx
-def r2labUE0Idx = '6'
-def r2labUE0 = 'fit0' + r2labUE0Idx
-def r2labUE0IpAddr = r2labBaseIpAddr + r2labUE0Idx
-
-pipeline {
-    agent {
-        label 'master'
-    }
-
-    options {
-        disableConcurrentBuilds()
-        timestamps()
-        ansiColor('xterm')
-    }
-
-    stages {
-        stage ("Book session") {
-            steps {
-                script {
-                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
-
-                    def allParametersPresent = true
-                    if (params.R2LAB_Credentials == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.R2LAB_FitNode_Credentials == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.R2LAB_LeaseBookStartTime == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.R2LAB_LeaseBookDuration == null) {
-                        allParametersPresent = false
-                    }
-
-                    // If not present picking a default Stage Name
-                    if (params.pipelineTestStageName == null) {
-                        // picking default
-                        testStageName = 'Tests at Inria R2LAB'
-                    }
-                    // If not present picking a default branch name
-                    if (params.pythonWorkingBranch == null) {
-                        ranRepoBranch = 'develop'
-                    }
-
-                    if (params.pythonTestXmlFile == null) {
-                        // picking default
-                        testXMLFile = 'xml_files/inria/enb_usrp210_band7_build.xml'
-                        echo "Test XML file(default):   ${testXMLFile}"
-                        mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
-                    } else {
-                        String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
-                        for (xmlFile in myXmlTestSuite) {
-                            mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
-                            echo "Test XML file         :   ${xmlFile}"
-                        }
-                    }
-
-                    if (!allParametersPresent) {
-                        currentBuild.result = 'ABORTED'
-                        error('Stopping early because no R2LAB credentials')
-                    }
-
-                    JOB_TIMESTAMP = sh returnStdout: true, script: 'date --rfc-3339=seconds | sed -e "s#+00:00##"'
-                    JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
-
-                    echo '\u2705 \u001B[32mBook a Session\u001B[0m'
-
-                    BOOK_TIMESTAMP = sh returnStdout: true, script: 'date --rfc-3339=date'
-                    BOOK_TIMESTAMP = BOOK_TIMESTAMP.trim()
-
-                    withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_Credentials}", usernameVariable: 'r2labuser', passwordVariable: 'r2labpassword']
-                        ]) {
-                        sh "python3 /home/eurecom/inria-scripts/booking-lease.py --book-lease --from ${BOOK_TIMESTAMP}T${r2labStartTime} --duration ${r2labDuration} --slice inria_oaici ${r2labuser} ${r2labpassword}"
-                        sh "python3 /home/eurecom/inria-scripts/booking-lease.py --get-leases ${r2labuser} ${r2labpassword}"
-                    }
-                }
-            }
-        }
-        stage ("Load Images") {
-            steps {
-                script {
-                    echo '\u2705 \u001B[32mLoad Image for Python Executor\u001B[0m'
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rload -i oai-ci-cd-u18-lowlatency-enb-ue ${r2labPythonExeIdx} > /dev/null 2>&1'"
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rwait --silent ${r2labPythonExeIdx}'"
-
-                    echo '\u2705 \u001B[32mLoad Image for one eNB\u001B[0m'
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rload -i oai-ci-cd-u18-lowlatency-enb-ue ${r2labENB0Idx} > /dev/null 2>&1'"
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rwait --silent ${r2labENB0Idx}'"
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'uon ${r2labENB0Idx}'"
-
-                    echo '\u2705 \u001B[32mLoad Image for one OAI UE\u001B[0m'
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rload -i oai-ci-cd-u18-lowlatency-enb-ue ${r2labUE0Idx} > /dev/null 2>&1'"
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rwait --silent ${r2labUE0Idx}'"
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'uon ${r2labUE0Idx}'"
-
-                    echo '\u2705 \u001B[32mLoad Image for one EPC\u001B[0m'
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rload -i oai-ci-cd-u18-lowlatency-epc ${r2labEPC0Idx} > /dev/null 2>&1'"
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'rwait --silent ${r2labEPC0Idx}'"
-
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'nodes ${r2labUE0Idx},${r2labPythonExeIdx},${r2labEPC0Idx},${r2labENB0Idx} && st'"
-                }
-            }
-        }
-        stage ("Prepare Python Executor") {
-            steps {
-                script {
-                    withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g && git fetch --all --prune --quiet\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g && git checkout --quiet ${ranRepoBranch}\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g && git pull --quiet origin ${ranRepoBranch}\"'"
-                        GIT_COMMIT_TO_RUN = sh returnStdout: true, script: "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g && git log -n1 --pretty=format:%H\"' | grep -v fit"
-                        GIT_COMMIT_TO_RUN = GIT_COMMIT_TO_RUN.trim()
-                        echo "Latest commit to use is ${GIT_COMMIT_TO_RUN}"
-
-                        // Putting the adaptation parameters for the OAI UE
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'scp /home/inria_oaici/for-ci/adapt_usim_parameters_${r2labUE0}.sed ${fituser}@${r2labUE0}:/tmp/adapt_usim_parameters.sed'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'scp /home/inria_oaici/for-ci/phones_list.txt ${fituser}@${r2labEPC0}:/tmp'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S cp /tmp/phones_list.txt /etc/ci\"'"
-
-                        // Out of rload, the sub-network-interfaces are not up
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:m11 172.16.1.102 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:m10 192.168.10.110 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:sxu 172.55.55.102 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:s1u 192.168.248.159 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:sxc 172.55.55.101 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:s5c 172.58.58.102 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:p5c 172.58.58.101 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ifconfig control:s11 172.16.1.104 up\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"ifconfig\"'"
-
-                        // Adding routes on the EPC
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ip route add default via 192.168.3.100 dev control table lte\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ip rule add from 12.0.0.0/8 table lte\"'"
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labEPC0} \"echo ${fitpasswd} | sudo -S ip rule add from 12.1.1.0/8 table lte\"'"
-
-                        // Adding a route on the eNB for the S1U interface
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labENB0} \"echo ${fitpasswd} | sudo -S ip route add 192.168.248.0/24 via ${r2labEPC0IpAddr} dev control\"'"
-
-                        // For the moment, simple way to route traffic from python executor to any UEs
-                        sh "ssh -t inria_oaici@faraday.inria.fr 'ssh -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"echo ${fitpasswd} | sudo -S ip route add 12.1.1.0/24 via ${r2labEPC0IpAddr} dev control\"'"
-                    }
-                }
-            }
-        }
-        stage ("Build and Test") {
-            steps {
-                script {
-                    withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                        sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=InitiateHtml --ranRepository=https://gitlab.eurecom.fr/oai/openairinterface5g --ranBranch=${ranRepoBranch} --ranCommitID=${GIT_COMMIT_TO_RUN} --ranAllowMerge=false --ADBIPAddress=${r2labEPC0IpAddr} --ADBUserName=${fituser} --ADBPassword=${fitpasswd} --ADBType=distributed ${mainPythonAllXmlFiles}\"'"
-                        String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
-                        for (xmlFile in myXmlTestSuite) {
-                            try {
-                                sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=TesteNB --ranRepository=https://gitlab.eurecom.fr/oai/openairinterface5g --ranBranch=${ranRepoBranch} --ranCommitID=${GIT_COMMIT_TO_RUN} --ranAllowMerge=false --eNBIPAddress=${r2labENB0IpAddr} --eNBUserName=${fituser} --eNBPassword=${fitpasswd} --eNBSourceCodePath=/home/${fituser}/openairinterface5g --UEIPAddress=${r2labUE0IpAddr} --UEUserName=${fituser} --UEPassword=${fitpasswd} --UESourceCodePath=/home/${fituser}/openairinterface5g --EPCIPAddress=${r2labEPC0IpAddr} --EPCType=OAI-Rel14-CUPS --EPCUserName=${fituser}  --EPCPassword=${fitpasswd} --EPCSourceCodePath=/home/${fituser}/openair-cn --ADBIPAddress=${r2labEPC0IpAddr} --ADBUserName=${fituser} --ADBPassword=${fitpasswd} --ADBType=distributed --XMLTestFile=${xmlFile}\"'"
-                            } catch (Exception e) {
-                                currentBuild.result = 'FAILURE'
-                                buildStageStatus = false
-                            }
-                        }
-                        sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${r2labENB0IpAddr} --eNBUserName=${fituser} --eNBPassword=${fitpasswd}\"'"
-                    }
-                }
-            }
-        }
-        stage ("Prepare Log Collection") {
-            steps {
-                sh "ssh -t inria_oaici@faraday.inria.fr 'mkdir -p /home/inria_oaici/archives'"
-                sh "ssh -t inria_oaici@faraday.inria.fr 'touch /home/inria_oaici/archives/no_error.txt'"
-                sh "ssh -t inria_oaici@faraday.inria.fr 'rm -f /home/inria_oaici/archives/*.*'"
-                withCredentials([
-                    [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                    ]) {
-                    sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labPythonExe}:/home/${fituser}/openairinterface5g/ci-scripts/test_results.html /home/inria_oaici/archives'"
-                }
-                sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/test_results.html ."
-                script {
-                    if(fileExists("./test_results.html")) {
-                        sh "mv ./test_results.html test_results-${JOB_NAME}.html"
-                        sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' test_results-${JOB_NAME}.html"
-                        archiveArtifacts "test_results-${JOB_NAME}.html"
-                    }
-                }
-            }
-        }
-        stage ("Log Collection") {
-            parallel {
-                stage('Log Collection (OAI eNB - Build)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (OAI eNB - Build)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectBuild --eNBIPAddress=${r2labENB0IpAddr} --eNBUserName=${fituser} --eNBPassword=${fitpasswd} --eNBSourceCodePath=/home/${fituser}/openairinterface5g\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labENB0}:/home/${fituser}/openairinterface5g/cmake_targets/build.log.zip /home/inria_oaici/archives/enb.build.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/enb.build.log.zip enb.build.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("enb.build.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "enb.build.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (OAI UE - Build)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (OAI UE - Build)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectBuild --UEIPAddress=${r2labUE0IpAddr} --UEUserName=${fituser} --UEPassword=${fitpasswd} --UESourceCodePath=/home/${fituser}/openairinterface5g\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labUE0}:/home/${fituser}/openairinterface5g/cmake_targets/build.log.zip /home/inria_oaici/archives/ue.build.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/ue.build.log.zip ue.build.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("ue.build.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "ue.build.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (OAI eNB - Runs)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (OAI eNB - Runs)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollecteNB --eNBIPAddress=${r2labENB0IpAddr} --eNBUserName=${fituser} --eNBPassword=${fitpasswd} --eNBSourceCodePath=/home/${fituser}/openairinterface5g\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labENB0}:/home/${fituser}/openairinterface5g/cmake_targets/enb.log.zip /home/inria_oaici/archives/enb.run.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/enb.run.log.zip enb.run.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("enb.run.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "enb.run.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (OAI UE - Runs)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (OAI UE - Runs)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectOAIUE --UEIPAddress=${r2labUE0IpAddr} --UEUserName=${fituser} --UEPassword=${fitpasswd} --UESourceCodePath=/home/${fituser}/openairinterface5g\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labUE0}:/home/${fituser}/openairinterface5g/cmake_targets/ue.log.zip /home/inria_oaici/archives/ue.run.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/ue.run.log.zip ue.run.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("ue.run.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "ue.run.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (MME)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (MME)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectMME --EPCIPAddress=${r2labEPC0IpAddr} --EPCUserName=${fituser} --EPCPassword=${fitpasswd} --EPCSourceCodePath=/home/${fituser}/openair-cn --EPCType=OAI-Rel14-CUPS\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labEPC0}:/home/${fituser}/openair-cn/scripts/mme.log.zip /home/inria_oaici/archives/mme.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/mme.log.zip mme.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("mme.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "mme.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (HSS)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (HSS)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectHSS --EPCIPAddress=${r2labEPC0IpAddr} --EPCUserName=${fituser} --EPCPassword=${fitpasswd} --EPCSourceCodePath=/home/${fituser}/openair-cn --EPCType=OAI-Rel14-CUPS\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labEPC0}:/home/${fituser}/openair-cn/scripts/hss.log.zip /home/inria_oaici/archives/hss.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/hss.log.zip hss.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("hss.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "hss.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (SPGW)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (SPGW)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectSPGW --EPCIPAddress=${r2labEPC0IpAddr} --EPCUserName=${fituser} --EPCPassword=${fitpasswd} --EPCSourceCodePath=/home/${fituser}/openair-cn --EPCType=OAI-Rel14-CUPS\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labEPC0}:/home/${fituser}/openair-cn/scripts/spgw.log.zip /home/inria_oaici/archives/spgw.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/spgw.log.zip spgw.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("spgw.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "spgw.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (Ping)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (Ping)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectPing --EPCIPAddress=${r2labEPC0IpAddr} --EPCUserName=${fituser} --EPCPassword=${fitpasswd} --EPCSourceCodePath=/home/${fituser}/openair-cn --EPCType=OAI-Rel14-CUPS\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labEPC0}:/home/${fituser}/openair-cn/scripts/ping.log.zip /home/inria_oaici/archives/ping.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/ping.log.zip ping.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("ping.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "ping.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (Iperf)') {
-                    steps {
-                        withCredentials([
-                        [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.R2LAB_FitNode_Credentials}", usernameVariable: 'fituser', passwordVariable: 'fitpasswd']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (Iperf)\u001B[0m'
-                            sh "ssh -t -t inria_oaici@faraday.inria.fr 'ssh -t -t -b 192.168.3.100 ${fituser}@${r2labPythonExe} \"cd openairinterface5g/ci-scripts && python3 main.py --mode=LogCollectIperf --EPCIPAddress=${r2labEPC0IpAddr} --EPCUserName=${fituser} --EPCPassword=${fitpasswd} --EPCSourceCodePath=/home/${fituser}/openair-cn --EPCType=OAI-Rel14-CUPS\"'"
-                            sh "ssh -t inria_oaici@faraday.inria.fr 'scp ${fituser}@${r2labEPC0}:/home/${fituser}/openair-cn/scripts/iperf.log.zip /home/inria_oaici/archives/iperf.log.zip'"
-                        }
-                        sh "scp inria_oaici@faraday.inria.fr:/home/inria_oaici/archives/iperf.log.zip iperf.log.${env.BUILD_ID}.zip"
-                        script {
-                            if(fileExists("iperf.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "iperf.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-            }
-        }
-        stage ("Clean-up Log Collection") {
-            steps {
-                sh "ssh -t inria_oaici@faraday.inria.fr 'rm -Rf /home/inria_oaici/archives'"
-            }
-        }
-    }
-
-    post {
-        always {
-            script {
-                echo '\u2705 \u001B[32mShutdown every node\u001B[0m'
-                sh 'ssh -t inria_oaici@faraday.inria.fr "all-off"'
-                sh 'ssh -t inria_oaici@faraday.inria.fr "all-off"'
-            }
-        }
-    }
-}

ci-scripts/Jenkinsfile-tmp-multi-enb

@@ -1,282 +0,0 @@
-#!/bin/groovy
-/*
- * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The OpenAirInterface Software Alliance licenses this file to You under
- * the OAI Public License, Version 1.1  (the "License"); you may not use this file
- * except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.openairinterface.org/?page_id=698
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *-------------------------------------------------------------------------------
- * For more information about the OpenAirInterface (OAI) Software Alliance:
- *      contact@openairinterface.org
- */
-
-// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
-
-// Location of the python executor node shall be in the same subnet as the others servers
-def pythonExecutor = params.pythonExecutor
-
-// Location of the test XML file to be run
-def testXMLFile = params.pythonTestXmlFile
-def mainPythonAllXmlFiles = ""
-def buildStageStatus = true
-
-// Name of the test stage
-def testStageName = params.pipelineTestStageName
-
-// Name of the phone resource
-def ciSmartPhoneResource = params.smartphonesResource
-
-// Global Parameters. Normally they should be populated when the master job
-// triggers the slave job with parameters
-def eNB_Repository
-def eNB_Branch
-def eNB_CommitID
-def eNB_AllowMergeRequestProcess = false
-def eNB_TargetBranch
-
-pipeline {
-    agent {
-        label pythonExecutor
-    }
-    options {
-        disableConcurrentBuilds()
-        ansiColor('xterm')
-        lock (ciSmartPhoneResource)
-    }
-    stages {
-        stage ("Verify Parameters") {
-            steps {
-                script {
-                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
-                    def allParametersPresent = true
-
-                    // It is already to late to check it
-                    if (params.pythonExecutor != null) {
-                        echo "eNB CI executor node  :   ${pythonExecutor}"
-                    }
-                    // If not present picking a default Stage Name
-                    if (params.pipelineTestStageName == null) {
-                        // picking default
-                        testStageName = 'Template Test Stage'
-                    }
-
-                    if (params.smartphonesResource == null) {
-                        allParametersPresent = false
-                    }
-                    // 1st eNB parameters
-                    if (params.eNB_IPAddress == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.eNB_SourceCodePath == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.eNB_Credentials == null) {
-                        allParametersPresent = false
-                    }
-                    // 2nd eNB parameters
-                    if (params.eNB1_IPAddress == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.eNB1_SourceCodePath == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.eNB1_Credentials == null) {
-                        allParametersPresent = false
-                    }
-                    // 3rd eNB parameters
-                    if (params.eNB2_IPAddress == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.eNB2_SourceCodePath == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.eNB2_Credentials == null) {
-                        allParametersPresent = false
-                    }
-                    // the following 4 parameters should be pushed by the master trigger
-                    // if not present, take the job GIT variables (used for developing)
-                    if (params.eNB_Repository == null) {
-                        eNB_Repository = env.GIT_URL
-                    } else {
-                        eNB_Repository = params.eNB_Repository
-                    }
-                    echo "eNB_Repository        :   ${eNB_Repository}"
-                    if (params.eNB_Branch == null) {
-                        eNB_Branch = env.GIT_BRANCH
-                    } else {
-                        eNB_Branch = params.eNB_Branch
-                    }
-                    echo "eNB_Branch            :   ${eNB_Branch}"
-                    if (params.eNB_CommitID == null) {
-                        eNB_CommitID = env.GIT_COMMIT
-                    } else {
-                        eNB_CommitID = params.eNB_CommitID
-                    }
-                    echo "eNB_CommitID          :   ${eNB_CommitID}"
-                    if (params.eNB_mergeRequest != null) {
-                        eNB_AllowMergeRequestProcess = params.eNB_mergeRequest
-                        if (eNB_AllowMergeRequestProcess) {
-                            if (params.eNB_TargetBranch != null) {
-                                eNB_TargetBranch = params.eNB_TargetBranch
-                            } else {
-                                eNB_TargetBranch = 'develop'
-                            }
-                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
-                        }
-                    }
-
-                    if (params.EPC_IPAddress == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.EPC_Type == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.EPC_SourceCodePath == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.EPC_Credentials == null) {
-                        allParametersPresent = false
-                    }
-
-                    if (params.ADB_IPAddress == null) {
-                        allParametersPresent = false
-                    }
-                    if (params.ADB_Credentials == null) {
-                        allParametersPresent = false
-                    }
-
-                    if (allParametersPresent) {
-                        echo "All parameters are present"
-                        if (eNB_AllowMergeRequestProcess) {
-                            sh "git fetch"
-                            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
-                        } else {
-                            sh "git fetch"
-                            sh "git checkout -f ${eNB_CommitID}"
-                        }
-                    } else {
-                        echo "Some parameters are missing"
-                        sh "./ci-scripts/fail.sh"
-                    }
-                }
-            }
-        }
-        stage ("Build and Test") {
-            steps {
-                script {
-                    dir ('ci-scripts') {
-                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
-                        // If not present picking a default XML file
-                        if (params.pythonTestXmlFile == null) {
-                            // picking default
-                            testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
-                            echo "Test XML file(default):   ${testXMLFile}"
-                            mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
-                        } else {
-                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
-                            for (xmlFile in myXmlTestSuite) {
-                                if (fileExists(xmlFile)) {
-                                    mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
-                                    echo "Test XML file         :   ${xmlFile}"
-                                }
-                            }
-                        }
-                        withCredentials([
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
-                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
-                        ]) {
-                            sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
-                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
-                            for (xmlFile in myXmlTestSuite) {
-                                if (fileExists(xmlFile)) {
-                                    try {
-                                        sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
-                                    } catch (Exception e) {
-                                        currentBuild.result = 'FAILURE'
-                                        buildStageStatus = false
-                                    }
-                                }
-                            }
-                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
-                        }
-                    }
-                }
-            }
-        }
-        stage('Log Collection') {
-            parallel {
-                stage('Log Collection (eNB - Build)') {
-                    steps {
-                        withCredentials([
-                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
-                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
-
-                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
-                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
-                        }
-                        script {
-                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
-                            }
-                        }
-                    }
-                }
-                stage('Log Collection (eNB - Run)') {
-                    steps {
-                        withCredentials([
-                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
-                        ]) {
-                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
-                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
-
-                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
-                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
-                        }
-                        script {
-                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
-                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
-                            }
-                            if(fileExists("ci-scripts/test_results.html")) {
-                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
-                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
-                                archiveArtifacts "test_results-${JOB_NAME}.html"
-                            }
-                        }
-                    }
-                }
-            }
-        }
-    }
-
-    post {
-        always {
-            script {
-                if (params.pipelineZipsConsoleLog != null) {
-                    if (params.pipelineZipsConsoleLog) {
-                        echo "Archiving Jenkins console log"
-                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
-                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
-                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
-                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
-                        }
-                    }
-                }
-            }
-        }
-    }
-}

ci-scripts/buildOnVM.sh

@@ -25,7 +25,7 @@ function build_usage {
     echo "   Original Author: Raphael Defosseux"
     echo "   Requirements:"
     echo "     -- uvtool uvtool-libvirt apt-cacher"
-    echo "     -- $VM_OSREL image already synced"
+    echo "     -- xenial image already synced"
     echo "   Default:"
     echo "     -- eNB with USRP"
     echo ""
@@ -33,8 +33,31 @@ function build_usage {
     echo "------"
     echo "    oai-ci-vm-tool build [OPTIONS]"
     echo ""
-    command_options_usage
-
+    echo "Mandatory Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    echo "Options:"
+    echo "--------"
+    variant_usage
+    echo "    Specify the variant to build."
+    echo ""
+    echo "    --keep-vm-alive OR -k"
+    echo "    Keep the VM alive after the build."
+    echo ""
+    echo "    --daemon OR -D"
+    echo "    Run as daemon"
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
 }
 
 function build_on_vm {
@@ -44,7 +67,7 @@ function build_on_vm {
         STATUS=1
         return
     fi
-    if [[ ! -f /etc/apt/apt.conf.d/01proxy ]] && [[ "$OPTIONAL_APTCACHER" != "true" ]]
+    if [ ! -f /etc/apt/apt.conf.d/01proxy ]
     then
         echo "Missing /etc/apt/apt.conf.d/01proxy file!"
         echo "Is apt-cacher installed and configured?"
@@ -72,7 +95,7 @@ function build_on_vm {
         echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
         echo "############################################################"
         acquire_vm_create_lock
-        uvt-kvm create $VM_NAME release=$VM_OSREL --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
+        uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
         echo "Waiting for VM to be started"
         uvt-kvm wait $VM_NAME --insecure
 
@@ -96,12 +119,12 @@ function build_on_vm {
     else
         scp -o StrictHostKeyChecking=no $JENKINS_WKSP/localZip.zip ubuntu@$VM_IP_ADDR:/home/ubuntu
     fi
-    [ -f /etc/apt/apt.conf.d/01proxy ] && scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$VM_IP_ADDR:/home/ubuntu
+    scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$VM_IP_ADDR:/home/ubuntu
 
     echo "############################################################"
     echo "Running install and build script on VM ($VM_NAME)"
     echo "############################################################"
-    echo "[ -f 01proxy ] && sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS
+    echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS
     echo "touch /home/ubuntu/.hushlogin" >> $VM_CMDS
     if [[ "$VM_NAME" == *"-cppcheck"* ]]
     then
@@ -168,12 +191,8 @@ function build_on_vm {
         echo "cp /home/ubuntu/zip-install.txt cmake_targets/log" >> $VM_CMDS
         echo "echo \"./tools/install_dependencies \"" >> $VM_CMDS
         echo "./tools/install_dependencies > cmake_targets/log/install-build.txt 2>&1" >> $VM_CMDS
-        echo "echo \"mkdir build\"" >> $VM_CMDS
-        echo "mkdir build" >> $VM_CMDS
-        echo "echo \"cd build\"" >> $VM_CMDS
-        echo "cd build" >> $VM_CMDS
         echo "echo \"$BUILD_OPTIONS \"" >> $VM_CMDS
-        echo "$BUILD_OPTIONS > ../cmake_targets/log/rt_controller.Rel14.txt 2>&1" >> $VM_CMDS
+        echo "$BUILD_OPTIONS > cmake_targets/log/rt_controller.Rel14.txt 2>&1" >> $VM_CMDS
     fi
     if [[ "$VM_NAME" != *"-cppcheck"* ]] && [[ "$VM_NAME" != *"-flexran-rtc"* ]]
     then

ci-scripts/conf_files/du.band7.tm1.100PRB.usrpb210.conf

@@ -117,12 +117,3 @@ NETWORK_CONTROLLER : {
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";
 };
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #        #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);

ci-scripts/conf_files/du.band7.tm1.25PRB.usrpb210.conf

@@ -117,12 +117,3 @@ NETWORK_CONTROLLER : {
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";
 };
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #        #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);

ci-scripts/conf_files/du.band7.tm1.50PRB.usrpb210.conf

@@ -117,12 +117,3 @@ NETWORK_CONTROLLER : {
   FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
   FLEXRAN_AWAIT_RECONF   = "no";
 };
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #        #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);

ci-scripts/conf_files/enb.band13.tm1.25PRB.usrpb210.conf

@@ -1,271 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe01;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  1;
-
-    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
-
-    nr_cellid = 98765L;
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "3GPP_eNODEB";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 13;
-      downlink_frequency      			      = 751000000L;
-      uplink_frequency_offset 			      = 31000000;
-      Nid_cell					      = 1;
-      N_RB_DL                 			      = 25;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 110;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -27;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-
-      //Parameters for SIB18
-      rxPool_sc_CP_Len                                       = "normal";
-      rxPool_sc_Period                                       = "sf40";
-      rxPool_data_CP_Len                                     = "normal";
-      rxPool_ResourceConfig_prb_Num                          = 20;
-      rxPool_ResourceConfig_prb_Start                        = 5;
-      rxPool_ResourceConfig_prb_End                          = 44;
-      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-*/
-      // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    ///X2
-    enable_x2 = "yes";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-    };
-  }
-);
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-       local_rf       = "yes"
-         nb_tx          = 1
-         nb_rx          = 1
-         att_tx         = 0
-         att_rx         = 0;
-         bands          = [7];
-         max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 125;
-         eNB_instances  = [0];
-
-    }
-);  
-
-NETWORK_CONTROLLER :
-{
-    FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
-    FLEXRAN_PORT           = 2210;
-    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
-    FLEXRAN_AWAIT_RECONF   = "no";
-};
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";//PARALLEL_RU_L1_TRX_SPLIT";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-     log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
-

ci-scripts/conf_files/enb.band13.tm1.50PRB.emtc.conf

@@ -171,7 +171,7 @@ eNBs =
                   lastPreamble_r13                  = 63;
                   ra_ResponseWindowSize_r13         = 20; #0
                   mac_ContentionResolutionTimer_r13 = 80; #0
-                  rar_HoppingConfig_r13             = 1; // Note 1 means off
+                  rar_HoppingConfig_r13             = "off";  #1;
               }
           );
 
@@ -233,7 +233,6 @@ eNBs =
           #pdsch_maxNumRepetitionCEmodeB_r13         = "r384"; # NULL - 2
 
           pusch_maxNumRepetitionCEmodeA_r13         = "r8"; #0
-	  pusch_repetitionLevelCEmodeA_r13	    = "l1";
           #pusch_maxNumRepetitionCEmodeB_r13         = "r768"; #4 #NULL
           #pusch_HoppingOffset_v1310                 = 5; #NULL
 

ci-scripts/conf_files/enb.band17.tm1.25PRB.usrpb210.conf

@@ -1,273 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
-
-    tr_s_preference     = "local_mac"
-
-    // In seconds
-    rrc_inactivity_threshold = 30;
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "3GPP_eNODEB";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 17;
-      downlink_frequency      			      = 736000000L;
-      uplink_frequency_offset 			      = -30000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 25;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -25;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-
-      //Parameters for SIB18
-      rxPool_sc_CP_Len                                       = "normal";
-      rxPool_sc_Period                                       = "sf40";
-      rxPool_data_CP_Len                                     = "normal";
-      rxPool_ResourceConfig_prb_Num                          = 20;
-      rxPool_ResourceConfig_prb_Start                        = 5;
-      rxPool_ResourceConfig_prb_End                          = 44;
-      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-*/
-      // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    enable_measurement_reports = "no";
-
-    ///X2
-    enable_x2 = "no";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-    };
-  }
-);
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-       local_rf       = "yes"
-         nb_tx          = 1
-         nb_rx          = 1
-         att_tx         = 0
-         att_rx         = 0;
-         bands          = [7];
-         max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 125;
-         eNB_instances  = [0];
-
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-NETWORK_CONTROLLER :
-{
-    FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
-    FLEXRAN_PORT           = 2210;
-    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
-    FLEXRAN_AWAIT_RECONF   = "no";
-};
-
-     log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
-

ci-scripts/conf_files/enb.band17.tm1.mbms.25PRB.usrpb210.conf

@@ -1,417 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
-
-    tr_s_preference     = "local_mac"
-
-    // In seconds
-    rrc_inactivity_threshold = 30;
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "3GPP_eNODEB";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 17;
-      downlink_frequency      			      = 736000000L;
-      uplink_frequency_offset 			      = -30000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 25;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -25;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-
-      //Parameters for SIB18
-      rxPool_sc_CP_Len                                       = "normal";
-      rxPool_sc_Period                                       = "sf40";
-      rxPool_data_CP_Len                                     = "normal";
-      rxPool_ResourceConfig_prb_Num                          = 20;
-      rxPool_ResourceConfig_prb_Start                        = 5;
-      rxPool_ResourceConfig_prb_End                          = 44;
-      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-*/
-      // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    enable_measurement_reports = "no";
-
-    ///X2
-    enable_x2 = "no";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-
-    ///M2
-    target_mce_m2_ip_address      = ( { ipv4       = "127.0.0.7";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    enable_enb_m2 = "yes";
-    
-    mbms_configuration_data_list = (
-                {
-                        mbsfn_sync_area = 0x0001;
-                        mbms_service_area_list=(
-                                {
-                                        mbms_service_area=0x0001;
-                                }
-                        );
-                }
-
-    );
-
-
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-	ENB_IPV4_ADDRESS_FOR_M2C                 = "127.0.0.2/24";
-	ENB_PORT_FOR_M2C                         = 36443; # Spec 36443
-    };
-  }
-);
-
-MCEs = (
-        {
-            MCE_ID    =  0xe00;
-
-            MCE_name  =  "MCE-Vicomtech-LTEBox";
-
-            //M2
-            enable_mce_m2 = "yes";
-
-            //M3
-            enable_mce_m3 = "yes";
-
-            target_mme_m3_ip_address      = ( { ipv4       = "127.0.0.18";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-
-
-            NETWORK_INTERFACES :
-            {
-                MCE_INTERFACE_NAME_FOR_M2_ENB            = "lo";
-                MCE_IPV4_ADDRESS_FOR_M2C                 = "127.0.0.7/24";
-                MCE_PORT_FOR_M2C                         = 36443; # Spec 36443
-
-                MCE_INTERFACE_NAME_FOR_M3_MME            = "lo";
-                MCE_IPV4_ADDRESS_FOR_M3C                 = "127.0.0.3/24";
-                MCE_PORT_FOR_M3C                         = 36444; # Spec 36444
-            };
-
-            plnm:
-            {
-                mcc = 208;
-                mnc = 93;
-                mnc_length = 2;
-            };
-
-            mbms_sched_info :
-            {
-                mcch_update_time = 10;
-                mbms_area_config_list = (
-                {
-                   common_sf_allocation_period = 2; #rf4(0) rf8(1) rf16(2) rf32(3) rf64(4) rf128(5) rf256(6)
-                   mbms_area_id = 0;
-                   pmch_config_list = (
-                   {
-                        allocated_sf_end=64;
-                        data_mcs=10;
-                        mch_scheduling_period = 0; #rf8(0)
-                        mbms_session_list = (
-                        {
-                                #plnm + service_id ->tmgi
-                                plnm:
-                                {
-                                    mcc = 208;
-                                    mnc = 93;
-                                    mnc_length = 2;
-                                }
-                                service_id=0;
-                                lcid=8; #this must be properly defined lcid:8+service:0 -> rab_id:8
-                        }
-                        );
-                   }
-                   );
-
-                   mbms_sf_config_list = (
-                   {
-                        radioframe_allocation_period=1; #n1(0) n2(1) n4(2) n8(3) n16(4) n32(5)
-                        radioframe_alloocation_offset=0;
-                        num_frame="oneFrame";
-                        subframe_allocation=57; #xx100000
-                        //num_frame="fourFrame";
-                        //subframe_allocation=14548987; #
-                   }
-
-                  );
-
-                }
-                );
-            };
-            mcch_config_per_mbsfn_area = (
-            {
-                mbsfn_area                = 0;
-                pdcch_length              = 1; #s1(0), s2(1)
-                repetition_period         = 0; #rf32(0), rf64(1), rf128(2), rf256(3)
-                offset                    = 0;
-                modification_period       = 0; #rf512(0; rf1024(1)
-                subframe_allocation_info = 32; #BITSTRING (6bits -> one frame) xx100101
-                mcs                       = 0; #n2(0), n7(1), n13(2), n19(3)
-            }
-            );
-                  #);  #end mbms_scheduling_info
-
-        }
-);
-
-
-MMEs = (
-        {
-            MME_ID    =  0xe00;
-
-            MME_name  =  "MME-MBMS-Vicomtech-LTEBox";
-
-            //M3
-            enable_mme_m3 = "yes";
-            NETWORK_INTERFACES :
-            {
-                MME_INTERFACE_NAME_FOR_M3_MCE            = "lo";
-                MME_IPV4_ADDRESS_FOR_M3C                 = "127.0.0.18/24";
-                MME_PORT_FOR_M3C                         = 36444; # Spec 36444
-
-            };
-        }
-);
-
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-       local_rf       = "yes"
-         nb_tx          = 1
-         nb_rx          = 1
-         att_tx         = 0
-         att_rx         = 0;
-         bands          = [7];
-         max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 125;
-         eNB_instances  = [0];
-
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-NETWORK_CONTROLLER :
-{
-    FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
-    FLEXRAN_PORT           = 2210;
-    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
-    FLEXRAN_AWAIT_RECONF   = "no";
-};
-
-     log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
-

ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -215,7 +215,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -215,7 +215,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -215,7 +215,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band40.tm2.25PRB.FairScheduler.usrpb210.conf

@@ -1,230 +0,0 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB_Eurecom_LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
-
-       ////////// Physical parameters:
-
-    component_carriers = (
-      {
-        node_function                                         = "eNodeB_3GPP";
-        node_timing                                           = "synch_to_ext_device";
-        node_synch_ref                                        = 0;
-        frame_type					      = "TDD";
-        tdd_config 					      = 1;
-        tdd_config_s            			      = 0;
-        prefix_type             			      = "NORMAL";
-        eutra_band              			      = 40;
-        downlink_frequency      			      = 2350000000L;
-        uplink_frequency_offset 			      = 0;
-        Nid_cell					      = 0;
-        N_RB_DL                 			      = 25;
-        Nid_cell_mbsfn          			      = 0;
-        nb_antenna_ports          			      = 2;
-        nb_antennas_tx          			      = 2;
-        nb_antennas_rx          			      = 2;
-        tx_gain                                               = 90;
-        rx_gain                                               = 125;
-        prach_root              			      = 0;
-        prach_config_index      			      = 0;
-        prach_high_speed        			      = "DISABLE";
-        prach_zero_correlation  			      = 1;
-        prach_freq_offset       			      = 2;
-        pucch_delta_shift       			      = 1;
-        pucch_nRB_CQI           			      = 1;
-        pucch_nCS_AN            			      = 0;
-        pucch_n1_AN             			      = 0;
-        pdsch_referenceSignalPower 			      =-27;
-        pdsch_p_b                  			      = 0;
-        pusch_n_SB                 			      = 1;
-        pusch_enable64QAM          			      = "DISABLE";
-        pusch_hoppingMode                                  = "interSubFrame";
-        pusch_hoppingOffset                                = 0;
-        pusch_groupHoppingEnabled  			      = "ENABLE";
-        pusch_groupAssignment      			      = 0;
-        pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-        pusch_nDMRS1                                       = 1;
-        phich_duration                                     = "NORMAL";
-        phich_resource                                     = "ONESIXTH";
-        srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-        srs_SubframeConfig                                 =;
-        srs_ackNackST                                      =;
-        srs_MaxUpPts                                       =;*/
-
-        pusch_p0_Nominal                                   = -96;
-        pusch_alpha                                        = "AL1";
-        pucch_p0_Nominal                                   = -106;
-        msg3_delta_Preamble                                = 6;
-        pucch_deltaF_Format1                               = "deltaF2";
-        pucch_deltaF_Format1b                              = "deltaF3";
-        pucch_deltaF_Format2                               = "deltaF0";
-        pucch_deltaF_Format2a                              = "deltaF0";
-        pucch_deltaF_Format2b		    	      = "deltaF0";
-
-        rach_numberOfRA_Preambles                          = 64;
-        rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-        rach_sizeOfRA_PreamblesGroupA                      = ;
-        rach_messageSizeGroupA                             = ;
-        rach_messagePowerOffsetGroupB                      = ;
-      */
-        rach_powerRampingStep                              = 4;
-        rach_preambleInitialReceivedTargetPower            = -108;
-        rach_preambleTransMax                              = 10;
-        rach_raResponseWindowSize                          = 10;
-        rach_macContentionResolutionTimer                  = 48;
-        rach_maxHARQ_Msg3Tx                                = 4;
-
-        pcch_default_PagingCycle                           = 128;
-        pcch_nB                                            = "oneT";
-        bcch_modificationPeriodCoeff			      = 2;
-        ue_TimersAndConstants_t300			      = 1000;
-        ue_TimersAndConstants_t301			      = 1000;
-        ue_TimersAndConstants_t310			      = 1000;
-        ue_TimersAndConstants_t311			      = 10000;
-        ue_TimersAndConstants_n310			      = 20;
-        ue_TimersAndConstants_n311			      = 1;
-
-	ue_TransmissionMode				      = 1;
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    ///X2
-    enable_x2 = "no";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-    };
-
-    log_config :
-    {
-      global_log_level                      ="debug";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-   };
-
-  }
-);
-MACRLCs = (
-	{
-        num_cc = 1;
-        tr_s_preference = "local_L1";
-        tr_n_preference = "local_RRC";
-        scheduler_mode = "fairRR";
-        puSch10xSnr     =  150;
-        puCch10xSnr     =  150;
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-       local_rf       = "yes"
-         nb_tx          = 2
-         nb_rx          = 2
-         att_tx         = 0
-         att_rx         = 0;
-         bands          = [38];
-         max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 110;
-         eNB_instances  = [0];
-
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-NETWORK_CONTROLLER :
-{
-    FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
-    FLEXRAN_PORT           = 2210;
-    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
-    FLEXRAN_AWAIT_RECONF   = "no";
-};

ci-scripts/conf_files/enb.band7.tm2.25PRB.usrpb210.conf

@@ -236,7 +236,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.slave.band13.tm1.25PRB.usrpb210.conf

@@ -1,276 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  1;
-
-    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
-
-    nr_cellid = 123456L;
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "3GPP_eNODEB";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 13;
-      downlink_frequency      			      = 751000000L;
-      uplink_frequency_offset 			      = 31000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 25;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 110;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -27;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-
-      //Parameters for SIB18
-      rxPool_sc_CP_Len                                       = "normal";
-      rxPool_sc_Period                                       = "sf40";
-      rxPool_data_CP_Len                                     = "normal";
-      rxPool_ResourceConfig_prb_Num                          = 20;
-      rxPool_ResourceConfig_prb_Start                        = 5;
-      rxPool_ResourceConfig_prb_End                          = 44;
-      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-*/
-      // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-    ///X2
-    enable_x2 = "yes";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-    target_enb_x2_ip_address      = (
-                                     { ipv4       = "CI_RCC_IP_ADDR";
-                                       ipv6       = "192:168:30::17";
-                                       preference = "ipv4";
-                                     }
-                                    );
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-    };
-  }
-);
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-       local_rf       = "yes"
-         nb_tx          = 1
-         nb_rx          = 1
-         att_tx         = 0
-         att_rx         = 0;
-         bands          = [7];
-         max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 125;
-         eNB_instances  = [0];
-
-    }
-);  
-
-NETWORK_CONTROLLER :
-{
-    FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "eth0";
-    FLEXRAN_IPV4_ADDRESS   = "CI_MME_IP_ADDR";
-    FLEXRAN_PORT           = 2210;
-    FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
-    FLEXRAN_AWAIT_RECONF   = "no";
-};
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";//PARALLEL_RU_L1_TRX_SPLIT";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-     log_config :
-     {
-       global_log_level                      ="info";
-       global_log_verbosity                  ="medium";
-       hw_log_level                          ="info";
-       hw_log_verbosity                      ="medium";
-       phy_log_level                         ="info";
-       phy_log_verbosity                     ="medium";
-       mac_log_level                         ="info";
-       mac_log_verbosity                     ="high";
-       rlc_log_level                         ="info";
-       rlc_log_verbosity                     ="medium";
-       pdcp_log_level                        ="info";
-       pdcp_log_verbosity                    ="medium";
-       rrc_log_level                         ="info";
-       rrc_log_verbosity                     ="medium";
-    };
-

ci-scripts/conf_files/rcc.band38.tm1.50PRB.multi.rru.conf

@@ -1,242 +0,0 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    # real_time choice in {hard, rt-preempt, no}
-    real_time       =  "no";
-
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB_Eurecom_LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "NGFI_RCC_IF4p5";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "TDD";
-      tdd_config 					      = 1;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 38;
-      downlink_frequency      			      = 2580000000L;
-      uplink_frequency_offset 			      = 0;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 50; #25;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 32;
-      pdsch_referenceSignalPower 			      = -27;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -104; #-96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -96; #-104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "enp129s0f0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "enp129s0f0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR"; #"127.0.0.4/24";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152\
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-
-    };
-  }
-);
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-      	local_if_name  = "enp129s0f0";			  
-      	local_address  = "CI_ENB_IP_ADDR";
-    	remote_address = "CI_RRU1_IP_ADDR";
-    	local_portc    = 50002;	
-    	remote_portc   = 50002;
-    	local_portd    = 50003;	
-    	remote_portd   = 50003;
-	local_rf       = "no"
-    	tr_preference  = "udp_if4p5"
-	nb_tx          = 1
-	nb_rx          = 1
-	att_tx         = 20
-	att_rx         = 20;
-	eNB_instances  = [0];
-	is_slave       = "no";
-	ota_sync_enabled = "yes";
-    },
-    {		  
-      	local_if_name  = "enp129s0f0";			  
-      	local_address  = "CI_ENB_IP_ADDR";
-    	remote_address = "CI_RRU2_IP_ADDR";
-    	local_portc    = 50010;	
-    	remote_portc   = 50010;
-    	local_portd    = 50011;	
-    	remote_portd   = 50011;
-	local_rf       = "no"
-    	tr_preference  = "udp_if4p5"
-	nb_tx          = 1
-	nb_rx          = 1
-	att_tx         = 20
-	att_rx         = 20;
-	eNB_instances  = [0];
-	is_slave       = "yes";
-	ota_sync_enabled = "yes";
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-log_config = { 
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-};

ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -222,7 +222,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -222,7 +222,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -222,7 +222,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band7.tm1.mbms-s1ap.if4p5.50PRB.lo.conf

@@ -1,378 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    # real_time choice in {hard, rt-preempt, no}
-    real_time       =  "no";
-
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 600;
-
-    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
-
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "NGFI_RCC_IF4p5";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 7;
-      downlink_frequency      			      = 2685000000L;
-      uplink_frequency_offset 			      = -120000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 50;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 2;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -27;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -104;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -108;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-      mbms_dedicated_serving_cell			= "DISABLE"
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.15.130";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    enable_measurement_reports = "no";
-
-    ///X2
-    enable_x2 = "no";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-
-
-    ////////// MCE parameters:
-    target_mce_m2_ip_address      = ( { ipv4       = "127.0.0.7";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    ///M2
-    enable_enb_m2 = "yes";
-   
-
-    mbms_configuration_data_list = (
-                {
-                        mbsfn_sync_area = 0x0001;
-                        mbms_service_area_list=(
-                                {
-                                        mbms_service_area=0x0001;
-                                }
-                        );
-                }
-
-    );
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "enp2s0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.10.15/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "enp2s0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.10.15/24";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.2/24";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-
-        ENB_IPV4_ADDRESS_FOR_M2C                 = "127.0.0.2/24";
-        ENB_PORT_FOR_M2C                         = 36443; # Spec 36443
-    };
-  }
-);
-
-MCEs = (
-        {
-            MCE_ID    =  0xe00;
-
-            MCE_name  =  "MCE-Vicomtech-LTEBox";
-
-            //M2
-            enable_mce_m2 = "yes";
-
-            //M3
-            enable_mce_m3 = "yes";
-
-            target_mme_m3_ip_address      = ( { ipv4       = "127.0.0.18";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-
-
-            NETWORK_INTERFACES :
-            {
-                MCE_INTERFACE_NAME_FOR_M2_ENB            = "lo";
-                MCE_IPV4_ADDRESS_FOR_M2C                 = "127.0.0.7/24";
-                MCE_PORT_FOR_M2C                         = 36443; # Spec 36443
-
-                MCE_INTERFACE_NAME_FOR_M3_MME            = "lo";
-                MCE_IPV4_ADDRESS_FOR_M3C                 = "127.0.0.3/24";
-                MCE_PORT_FOR_M3C                         = 36444; # Spec 36444
-            };
-
-            plnm:
-            {
-                mcc = 208;
-                mnc = 93;
-                mnc_length = 2;
-            };
-
-            mbms_sched_info :
-            {
-                mcch_update_time = 10;
-                mbms_area_config_list = (
-                {
-                   common_sf_allocation_period = 2; #rf4(0) rf8(1) rf16(2) rf32(3) rf64(4) rf128(5) rf256(6)
-                   mbms_area_id = 0;
-                   pmch_config_list = (
-                   {
-                        allocated_sf_end=32;
-                        data_mcs=14;
-                        mch_scheduling_period = 0; #rf8(0)
-                        mbms_session_list = (
-                        {
-                                #plnm + service_id ->tmgi
-                               plnm:
-                                {
-                                    mcc = 208;
-                                    mnc = 93;
-                                    mnc_length = 2;
-                                }
-                                service_id=0; #keep this allways as 0 (workaround for TUN if)
-                                lcid=6; #this must be properly defined lcid:6+service:0 -> rab_id:6
-                        }
-                        );
-                   }
-                   );
-
-                   mbms_sf_config_list = (
-                   {
-                        radioframe_allocation_period=1; #n1(0) n2(1) n4(2) n8(3) n16(4) n32(5)
-                        radioframe_alloocation_offset=0;
-                        num_frame="oneFrame";
-                        subframe_allocation=57; #xx111001
-                        //num_frame="fourFrame";
-                        //subframe_allocation=14548987; #
-                   }
-                   );
-
-                }
-                );
-            };
-
-
-            mcch_config_per_mbsfn_area = (
-            {
-                mbsfn_area                = 0;
-                pdcch_length              = 1; #s1(0), s2(1)
-                repetition_period         = 0; #rf32(0), rf64(1), rf128(2), rf256(3)
-                offset                    = 0;
-                modification_period       = 0; #rf512(0; rf1024(1)
-                subframe_allocation_info = 32; #BITSTRING (6bits -> one frame) xx100000
-                mcs                       = 1; #n2(0), n7(1), n13(2), n19(3)
-            }
-            );
-
-                  #);  #end mbms_scheduling_info
-
-        }
-);
-MMEs = (
-        {
-            MME_ID    =  0xe00;
-
-            MME_name  =  "MME-MBMS-Vicomtech-LTEBox";
-
-            //M3
-            enable_mme_m3 = "yes";
-            NETWORK_INTERFACES :
-            {
-                MME_INTERFACE_NAME_FOR_M3_MCE            = "lo";
-                MME_IPV4_ADDRESS_FOR_M3C                 = "127.0.0.18/24";
-                MME_PORT_FOR_M3C                         = 36444; # Spec 36444
-
-            };
-        }
-);
-
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-      	local_if_name  = "lo";			  
-      	remote_address = "127.0.0.2";
-    	local_address  = "127.0.0.1"; 
-    	local_portc    = 50000;	
-    	remote_portc   = 50000;
-    	local_portd    = 50001;	
-    	remote_portd   = 50001;
-	local_rf       = "no"
-    	tr_preference  = "udp_if4p5"
-	nb_tx          = 2
-	nb_rx          = 2
-	att_tx         = 0
-	att_rx         = 0;
-	eNB_instances  = [0];
-        is_slave       = "no";
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-log_config = { 
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-};

ci-scripts/conf_files/rcc.band7.tm1.mbms.if4p5.50PRB.lo.conf

@@ -1,378 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    # real_time choice in {hard, rt-preempt, no}
-    real_time       =  "no";
-
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-
-    plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
-
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "NGFI_RCC_IF4p5";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 7;
-      downlink_frequency      			      = 2685000000L;
-      uplink_frequency_offset 			      = -120000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 50;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 2;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -27;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -104;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -108;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-      mbms_dedicated_serving_cell			= "DISABLE"
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "127.0.0.3";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    enable_measurement_reports = "no";
-
-    ///X2
-    enable_x2 = "no";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-
-
-    ////////// MCE parameters:
-    target_mce_m2_ip_address      = ( { ipv4       = "127.0.0.7";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    ///M2
-    enable_enb_m2 = "yes";
-   
-
-    mbms_configuration_data_list = (
-                {
-                        mbsfn_sync_area = 0x0001;
-                        mbms_service_area_list=(
-                                {
-                                        mbms_service_area=0x0001;
-                                }
-                        );
-                }
-
-    );
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.5/24";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.2/24";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-
-        ENB_IPV4_ADDRESS_FOR_M2C                 = "127.0.0.2/24";
-        ENB_PORT_FOR_M2C                         = 36443; # Spec 36443
-    };
-  }
-);
-
-MCEs = (
-        {
-            MCE_ID    =  0xe00;
-
-            MCE_name  =  "MCE-Vicomtech-LTEBox";
-
-            //M2
-            enable_mce_m2 = "yes";
-
-            //M3
-            enable_mce_m3 = "yes";
-
-            target_mme_m3_ip_address      = ( { ipv4       = "127.0.0.18";
-                              ipv6       = "192:168:30::17";
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-
-
-            NETWORK_INTERFACES :
-            {
-                MCE_INTERFACE_NAME_FOR_M2_ENB            = "lo";
-                MCE_IPV4_ADDRESS_FOR_M2C                 = "127.0.0.7/24";
-                MCE_PORT_FOR_M2C                         = 36443; # Spec 36443
-
-                MCE_INTERFACE_NAME_FOR_M3_MME            = "lo";
-                MCE_IPV4_ADDRESS_FOR_M3C                 = "127.0.0.3/24";
-                MCE_PORT_FOR_M3C                         = 36444; # Spec 36444
-            };
-
-            plnm:
-            {
-                mcc = 208;
-                mnc = 93;
-                mnc_length = 2;
-            };
-
-            mbms_sched_info :
-            {
-                mcch_update_time = 10;
-                mbms_area_config_list = (
-                {
-                   common_sf_allocation_period = 2; #rf4(0) rf8(1) rf16(2) rf32(3) rf64(4) rf128(5) rf256(6)
-                   mbms_area_id = 0;
-                   pmch_config_list = (
-                   {
-                        allocated_sf_end=32;
-                        data_mcs=14;
-                        mch_scheduling_period = 0; #rf8(0)
-                        mbms_session_list = (
-                        {
-                                #plnm + service_id ->tmgi
-                               plnm:
-                                {
-                                    mcc = 208;
-                                    mnc = 93;
-                                    mnc_length = 2;
-                                }
-                                service_id=0; #keep this allways as 0 (workaround for TUN if)
-                                lcid=6; #this must be properly defined lcid:6+service:0 -> rab_id:6
-                        }
-                        );
-                   }
-                   );
-
-                   mbms_sf_config_list = (
-                   {
-                        radioframe_allocation_period=1; #n1(0) n2(1) n4(2) n8(3) n16(4) n32(5)
-                        radioframe_alloocation_offset=0;
-                        num_frame="oneFrame";
-                        subframe_allocation=57; #xx111001
-                        //num_frame="fourFrame";
-                        //subframe_allocation=14548987; #
-                   }
-                   );
-
-                }
-                );
-            };
-
-
-            mcch_config_per_mbsfn_area = (
-            {
-                mbsfn_area                = 0;
-                pdcch_length              = 1; #s1(0), s2(1)
-                repetition_period         = 0; #rf32(0), rf64(1), rf128(2), rf256(3)
-                offset                    = 0;
-                modification_period       = 0; #rf512(0; rf1024(1)
-                subframe_allocation_info = 32; #BITSTRING (6bits -> one frame) xx100000
-                mcs                       = 1; #n2(0), n7(1), n13(2), n19(3)
-            }
-            );
-
-                  #);  #end mbms_scheduling_info
-
-        }
-);
-MMEs = (
-        {
-            MME_ID    =  0xe00;
-
-            MME_name  =  "MME-MBMS-Vicomtech-LTEBox";
-
-            //M3
-            enable_mme_m3 = "yes";
-            NETWORK_INTERFACES :
-            {
-                MME_INTERFACE_NAME_FOR_M3_MCE            = "lo";
-                MME_IPV4_ADDRESS_FOR_M3C                 = "127.0.0.18/24";
-                MME_PORT_FOR_M3C                         = 36444; # Spec 36444
-
-            };
-        }
-);
-
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-        }  
-);
-
-L1s = (
-    	{
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-        }  
-);
-
-RUs = (
-    {		  
-      	local_if_name  = "lo";			  
-      	remote_address = "127.0.0.2";
-    	local_address  = "127.0.0.1"; 
-    	local_portc    = 50000;	
-    	remote_portc   = 50000;
-    	local_portd    = 50001;	
-    	remote_portd   = 50001;
-	local_rf       = "no"
-    	tr_preference  = "udp_if4p5"
-	nb_tx          = 2
-	nb_rx          = 2
-	att_tx         = 0
-	att_rx         = 0;
-	eNB_instances  = [0];
-        is_slave       = "no";
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-log_config = { 
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-};

ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf

@@ -218,7 +218,7 @@ MACRLCs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rru.band38.tm1.master.conf

@@ -1,47 +0,0 @@
-RUs = (
-    {		  
-      	local_if_name                    = "enp1s0";			  
-      	remote_address                   = "CI_RCC_IP_ADDR";
-    	local_address                    = "CI_ENB_IP_ADDR";
-    	local_portc                       = 50002;	     
-    	remote_portc                      = 50002;
-    	local_portd                       = 50003;	     
-    	remote_portd                      = 50003;
-	local_rf                         = "yes"
-    	tr_preference                    = "udp_if4p5";
-	nb_tx                            = 1;
-	nb_rx                            = 1;
-	max_pdschReferenceSignalPower    = -12;
-	max_rxgain                       = 100;
-	bands                            = [38];
-        is_slave			 = "no";
-        ota_sync_enabled		 = "yes";
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-log_config = { 
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-};
-

ci-scripts/conf_files/rru.band38.tm1.slave.conf

@@ -1,47 +0,0 @@
-RUs = (
-    {		  
-      	local_if_name                    = "enp1s0";			  
-      	remote_address                   = "CI_RCC_IP_ADDR";
-    	local_address                    = "CI_ENB_IP_ADDR";
-    	local_portc                       = 50010;	     
-    	remote_portc                      = 50010;
-    	local_portd                       = 50011;	     
-    	remote_portd                      = 50011;
-	local_rf                         = "yes"
-    	tr_preference                    = "udp_if4p5";
-	nb_tx                            = 1;
-	nb_rx                            = 1;
-	max_pdschReferenceSignalPower    = -12;
-	max_rxgain                       = 100;
-	bands                            = [38];
-	is_slave			 = "yes";
-	ota_sync_enabled		 = "yes";
-    }
-);  
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-log_config = { 
-      global_log_level                      ="info";
-      global_log_verbosity                  ="medium";
-      hw_log_level                          ="info";
-      hw_log_verbosity                      ="medium";
-      phy_log_level                         ="info";
-      phy_log_verbosity                     ="medium";
-      mac_log_level                         ="info";
-      mac_log_verbosity                     ="high";
-      rlc_log_level                         ="info";
-      rlc_log_verbosity                     ="medium";
-      pdcp_log_level                        ="info";
-      pdcp_log_verbosity                    ="medium";
-      rrc_log_level                         ="info";
-      rrc_log_verbosity                     ="medium";
-};
-

ci-scripts/conf_files/rru.tdd.band40.conf

@@ -20,7 +20,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/createVM.sh

@@ -25,7 +25,7 @@ function create_usage {
     echo "   Original Author: Raphael Defosseux"
     echo "   Requirements:"
     echo "     -- uvtool uvtool-libvirt apt-cacher"
-    echo "     -- $VM_OSREL image already synced"
+    echo "     -- xenial image already synced"
     echo "   Default:"
     echo "     -- eNB with USRP"
     echo ""
@@ -90,7 +90,7 @@ function create_vm {
     echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
     echo "############################################################"
     acquire_vm_create_lock
-    uvt-kvm create $VM_NAME release=$VM_OSREL --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
+    uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
     echo "Waiting for VM to be started"
     uvt-kvm wait $VM_NAME --insecure
 

ci-scripts/destroyAllRunningVM.sh

@@ -30,7 +30,19 @@ function destroy_usage {
     echo "------"
     echo "    oai-ci-vm-tool destroy [OPTIONS]"
     echo ""
-    command_options_usage
+    echo "Mandatory Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
 }
 
 function destroy_vm {

ci-scripts/doGitLabMerge.sh

@@ -125,16 +125,7 @@ fi
 git config user.email "jenkins@openairinterface.org"
 git config user.name "OAI Jenkins"
 
-git checkout -f $SOURCE_COMMIT_ID > checkout.txt 2>&1
-STATUS=`egrep -c "fatal: reference is not a tree" checkout.txt`
-rm -f checkout.txt
-if [ $STATUS -ne 0 ]
-then
-    echo "fatal: reference is not a tree --> $SOURCE_COMMIT_ID"
-    STATUS=-1
-    exit $STATUS
-fi
-
+git checkout -f $SOURCE_COMMIT_ID
 git log -n1 --pretty=format:\"%s\" > .git/CI_COMMIT_MSG
 
 git merge --ff $TARGET_COMMIT_ID -m "Temporary merge for CI"

ci-scripts/doc/vm_based_simulator_main_scripts.md

@@ -52,7 +52,7 @@ The main script is including a bunch of sub BASH scripts.
 *  ci-scripts/reportBuildLocally.sh
 *  ci-scripts/reportTestLocally.sh
 
-**NOTE: ci-scripts/runTestOnVM.sh is getting big and will certainly be split to facilitate maintenance. Start functions will be also factorized.**
+**NOTE: ci-scripts/runTestOnVM.sh is getting big and will certainly be split to facilate maintenance. Start functions will be also factorized.**
 
 # 3. Main script features #
 
@@ -62,7 +62,7 @@ It is also **testing if uvtool and apt-cacher are installed.**
 
 It finally provides parameters to the requested functions. Parameter definition is centralized there.
 
-For example:
+For example: 
 
 for VM instance creation:
 
@@ -75,122 +75,13 @@ for OAI variant build:
 *  build log file to parse: LOG_PATTERN
 *  the number of log files to parse: NB_PATTERN_FILES
 
-You can get the list of variant specific variables specifying the variant argument when asking for help:
+These last 2 variables are very important if you change the build options or if you modify the build system and add more targets to build (especially true for physical simulator).
 
-``` bash
-./ci-scripts/oai-ci-vm-tool help variant
-    --variant flexran-rtc     OR -v10    ( build and test non-OSA )
-               VM_NAME=ci-flexran-rtc           ARCHIVES_LOC=flexran        
-               VM_MEMORY=2048                   VM_CPU=4              
-               NB_PATTERN_FILES=1               BUILD_OPTIONS="cmake . && make -j2"
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant enb-usrp        OR -v1     ( build and test  )
-               VM_NAME=ci-enb-usrp              ARCHIVES_LOC=enb_usrp       
-               VM_MEMORY=2048                   VM_CPU=4              
-               NB_PATTERN_FILES=9               BUILD_OPTIONS="--eNB -w USRP --mu"
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant l1-sim          OR -v20    ( test  )
-               VM_NAME=ci-l1-sim                ARCHIVES_LOC=l1_sim         
-               VM_MEMORY=2048                   VM_CPU=4              
-               NB_PATTERN_FILES=9               BUILD_OPTIONS=""             
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant rf-sim          OR -v21    ( test  )
-               VM_NAME=ci-rf-sim                ARCHIVES_LOC=rf_sim         
-               VM_MEMORY=2048                   VM_CPU=4              
-               NB_PATTERN_FILES=9               BUILD_OPTIONS=""             
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant l2-sim          OR -v22    ( test  )
-               VM_NAME=ci-l2-sim                ARCHIVES_LOC=l2_sim         
-               VM_MEMORY=2048                   VM_CPU=4              
-               NB_PATTERN_FILES=9               BUILD_OPTIONS=""             
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant basic-sim       OR -v2     ( build and test  )
-               VM_NAME=ci-basic-sim             ARCHIVES_LOC=basic_sim      
-               VM_MEMORY=8192                   VM_CPU=4              
-               NB_PATTERN_FILES=13              BUILD_OPTIONS="--eNB --UE"   
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant phy-sim         OR -v3     ( build and test  )
-               VM_NAME=ci-phy-sim               ARCHIVES_LOC=phy_sim        
-               VM_MEMORY=2048                   VM_CPU=4              
-               NB_PATTERN_FILES=3               BUILD_OPTIONS="--phy_simulators"
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant cppcheck        OR -v4     ( build and test  )
-               VM_NAME=ci-cppcheck              ARCHIVES_LOC=cppcheck       
-               VM_MEMORY=4096                   VM_CPU=4              
-               NB_PATTERN_FILES=1               BUILD_OPTIONS="--enable=warning --force --xml --xml-version=2 --suppressions-list=ci-scripts/cppcheck_suppressions.list -I common/utils -j4"
-               LOG_PATTERN=cppcheck.xml   
-
-    --variant enb-ethernet    OR -v7     ( build and test  )
-               VM_NAME=ci-enb-ethernet          ARCHIVES_LOC=enb_eth        
-               VM_MEMORY=4096                   VM_CPU=4              
-               NB_PATTERN_FILES=8               BUILD_OPTIONS="--eNB"        
-               LOG_PATTERN=.Rel14.txt     
-
-    --variant ue-ethernet     OR -v8     ( build and test  )
-               VM_NAME=ci-ue-ethernet           ARCHIVES_LOC=ue_eth         
-               VM_MEMORY=4096                   VM_CPU=4              
-               NB_PATTERN_FILES=12              BUILD_OPTIONS="--UE"         
-               LOG_PATTERN=.Rel14.txt     
-
-```
-
-To define a new variant you just need to define a function which name conforms to `function variant__v<n>__<variant_name>` where n and variant_name will respectively define the short and long options for your variant. The function only needs to define the variant dependent variables. For many variables, default values are set in the `check_set_variant` function. When a variant doesn't define the BUILD_OPTIONS variable it cannot be used for the `build` `wait` and `create` commands.
-
-The main scripts also allows the definition of non variant-dependant variable via the `--setvar_<variable name> <variable value>` options.
-You can get the list of these variables by using `help setvar`:
-
-```BASH
-./ci-scripts/oai-ci-vm-tool help setvar
---setvar_<varname> <value> where varname is one of:
-            VM_OSREL :     OS release to use in virtual machines
-    RUN_EXPERIMENTAL :     Enforce execution of variants with EXPERIMENTAL variable set to "true"
-```
-
-To add a new non-variant dependant variable you need:
-* Add an item to the `AUTHORIZED_VAR` array
-* In the `setvar_usage`function,  add your help string in the HELP_VAR["<your variable name>"] variable.
-* Write the bash code for your variable.
-
-Example of non variant dependent usage:
-
-``` bash
-./ci-scripts/oai-ci-vm-tool test -v21  -ws /usr/local/oai/enhance_CI_extEPC/openairinterface5g -id 1 -jn testci
-Currently testci-b1-rf-sim Testing is not implemented / enabled
-Comment out these lines in ./ci-scripts/oai-ci-vm-tool if you want to run it
- or use option --setvar_RUN_EXPERIMENTAL=true to test it
-
-
- ./ci-scripts/oai-ci-vm-tool test -v21  -ws /usr/local/oai/enhance_CI_extEPC/openairinterface5g -id 1 -jn testci --setvar_RUN_EXPERIMENTAL true
- Setting RUN_EXPERIMENTAL to true...
- ############################################################
- OAI CI VM script
- ############################################################
- ENB_VM_NAME         = testci-b1-enb-ethernet
- ENB_VM_CMD_FILE     = testci-b1-enb-ethernet_cmds.txt
- UE_VM_NAME          = testci-b1-ue-ethernet
- UE_VM_CMD_FILE      = testci-b1-ue-ethernet_cmds.txt
- JENKINS_WKSP        = /usr/local/oai/enhance_CI_extEPC/openairinterface5g
- ARCHIVES_LOC        = /usr/local/oai/enhance_CI_extEPC/openairinterface5g/archives/rf_sim/test
- ############################################################
- Waiting for ENB VM to be started
-...........................
-```
-
-In the same way, you can set the variable `VM_OSREL` to run the test in virtual machines of the specified OS release:
-
-``` bash
-./ci-scripts/oai-ci-vm-tool test -v21  -ws /usr/local/oai/enhance_CI_extEPC/openairinterface5g -id 1 -jn testci --setvar_VM_OSREL bionic
-```
+There are many more variables.
 
 ---
 
 Next step: [how to create one or several VM instances](./vm_based_simulator_create.md)
 
 You can also go back to the [CI dev main page](./ci_dev_home.md)
+

ci-scripts/reportBuildLocally.sh

@@ -28,8 +28,56 @@ function report_build_usage {
     echo "------"
     echo "    oai-ci-vm-tool report-build [OPTIONS]"
     echo ""
-    command_options_usage
-
+    echo "Options:"
+    echo "--------"
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+    echo "Job Options:"
+    echo "------------"
+    echo ""
+    echo "    --git-url #### OR -gu ####"
+    echo "    Specify the URL of the GIT Repository."
+    echo ""
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    echo "    --trigger merge-request OR -mr"
+    echo "    --trigger push          OR -pu"
+    echo "    Specify trigger action of the Jenkins job. Either a merge-request event or a push event."
+    echo ""
+    echo "Merge-Request Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --src-commit #### OR -sc ####"
+    echo "    Specify the source commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --target-commit #### OR -tc ####"
+    echo "    Specify the target commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "Push Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --branch #### OR -br ####"
+    echo "    Specify the branch of the push event."
+    echo ""
+    echo "    --commit #### OR -co ####"
+    echo "    Specify the commit ID (SHA-1) of the push event."
+    echo ""
+    echo ""
 }
 
 function trigger_usage {

ci-scripts/reportTestLocally.sh

@@ -28,7 +28,56 @@ function report_test_usage {
     echo "------"
     echo "    oai-ci-vm-tool report-test [OPTIONS]"
     echo ""
-    command_options_usage
+    echo "Options:"
+    echo "--------"
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+    echo "Job Options:"
+    echo "------------"
+    echo ""
+    echo "    --git-url #### OR -gu ####"
+    echo "    Specify the URL of the GIT Repository."
+    echo ""
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    echo "    --trigger merge-request OR -mr"
+    echo "    --trigger push          OR -pu"
+    echo "    Specify trigger action of the Jenkins job. Either a merge-request event or a push event."
+    echo ""
+    echo "Merge-Request Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --src-commit #### OR -sc ####"
+    echo "    Specify the source commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --target-commit #### OR -tc ####"
+    echo "    Specify the target commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "Push Options:"
+    echo "----------------------"
+    echo ""
+    echo "    --branch #### OR -br ####"
+    echo "    Specify the branch of the push event."
+    echo ""
+    echo "    --commit #### OR -co ####"
+    echo "    Specify the commit ID (SHA-1) of the push event."
+    echo ""
+    echo ""
 }
 
 function analyzePingFiles {

ci-scripts/runTestOnVM.sh

@@ -20,12 +20,12 @@
 # *      contact@openairinterface.org
 # */
 
-function test_usage {
+function run_test_usage {
     echo "OAI CI VM script"
     echo "   Original Author: Raphael Defosseux"
     echo "   Requirements:"
     echo "     -- uvtool uvtool-libvirt apt-cacher"
-    echo "     -- $VM_OSREL image already synced"
+    echo "     -- xenial image already synced"
     echo "   Default:"
     echo "     -- eNB with USRP"
     echo ""
@@ -33,7 +33,26 @@ function test_usage {
     echo "------"
     echo "    oai-ci-vm-tool test [OPTIONS]"
     echo ""
-    command_options_usage
+    echo "Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    variant_usage
+    echo "    Specify the variant to build."
+    echo ""
+    echo "    --keep-vm-alive OR -k"
+    echo "    Keep the VM alive after the build."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
 }
 
 function start_basic_sim_enb {
@@ -107,7 +126,7 @@ function start_basic_sim_ue {
     echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" > $1
     echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
     echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build" >> $1
-    echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS  --log_config.global_log_options nocolor,level --basicsim\" > ./my-lte-uesoftmodem-run.sh" >> $1
+    echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS  --log_config.global_log_options level,nocolor --basicsim\" > ./my-lte-uesoftmodem-run.sh" >> $1
     echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
     echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
     echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1
@@ -464,7 +483,7 @@ function install_epc_on_vm {
         echo "Creating test EPC VM ($LOC_EPC_VM_NAME) on Ubuntu Cloud Image base"
         echo "############################################################"
         acquire_vm_create_lock
-        uvt-kvm create $LOC_EPC_VM_NAME release=$VM_OSREL --unsafe-caching
+        uvt-kvm create $LOC_EPC_VM_NAME release=xenial --unsafe-caching
         echo "Waiting for VM to be started"
         uvt-kvm wait $LOC_EPC_VM_NAME --insecure
         release_vm_create_lock
@@ -476,7 +495,7 @@ function install_epc_on_vm {
     local LOC_EPC_VM_IP_ADDR=`uvt-kvm ip $LOC_EPC_VM_NAME`
 
     echo "$LOC_EPC_VM_NAME has for IP addr = $LOC_EPC_VM_IP_ADDR"
-    [ -f /etc/apt/apt.conf.d/01proxy ] && scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
+    scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
 
     # ltebox specific actions (install and start)
     LTE_BOX_TO_INSTALL=1
@@ -500,7 +519,7 @@ function install_epc_on_vm {
         echo "############################################################"
         echo "Install EPC on EPC VM ($LOC_EPC_VM_NAME)"
         echo "############################################################"
-        echo "sudo [ -f 01proxy ] && cp 01proxy /etc/apt/apt.conf.d/" > $LOC_EPC_VM_CMDS
+        echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $LOC_EPC_VM_CMDS
         echo "touch /home/ubuntu/.hushlogin" >> $LOC_EPC_VM_CMDS
         echo "echo \"sudo apt-get --yes --quiet install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf\"" >> $LOC_EPC_VM_CMDS
         echo "sudo apt-get update > zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
@@ -610,19 +629,14 @@ function retrieve_real_epc_ip_addr {
     local LOC_EPC_VM_CMDS=$2
     local LOC_EPC_VM_IP_ADDR=$3
 
-    if [[ "$EPC_IPADDR" == "" ]]
+    if [ $LTEBOX -eq 1 ]
     then
-        if [ $LTEBOX -eq 1 ]
-        then
-            # in our configuration file, we are using pool 5
-            echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $LOC_EPC_VM_CMDS
-            REAL_EPC_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
-            rm $LOC_EPC_VM_CMDS
-        fi
-    else
-        REAL_EPC_IP_ADDR=$EPC_TUN_IPADDR
+        # in our configuration file, we are using pool 5
+        echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $LOC_EPC_VM_CMDS
+        REAL_EPC_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
+        echo "EPC IP Address     is : $REAL_EPC_IP_ADDR"
+        rm $LOC_EPC_VM_CMDS
     fi
-    echo "EPC IP Address     is : $REAL_EPC_IP_ADDR"
 }
 
 function terminate_epc {
@@ -1079,7 +1093,7 @@ function run_test_on_vm {
     echo "############################################################"
     echo "OAI CI VM script"
     echo "############################################################"
-    if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* ))  ]] ||  [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* ))  ]]
+    if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) || (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
     then
         ENB_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#enb-ethernet#" -e "s#rf-sim#enb-ethernet#"`
         ENB_VM_CMDS=${ENB_VM_NAME}_cmds.txt
@@ -1096,7 +1110,7 @@ function run_test_on_vm {
     echo "JENKINS_WKSP        = $JENKINS_WKSP"
     echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
 
-    if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* ))  ]] ||  [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* ))  ]]
+    if [[ (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-l2-sim.* )) || (( "$RUN_OPTIONS" == "complex" ) && ( $VM_NAME =~ .*-rf-sim.* )) ]]
     then
         echo "############################################################"
         echo "Waiting for ENB VM to be started"
@@ -1247,18 +1261,11 @@ function run_test_on_vm {
         EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
         EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
         LTEBOX=0
-        if [[ "$EPC_IPADDR" == "" ]]
-        then
-            # Creating a VM for EPC and installing SW
-            install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
-            EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
+        install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
+        EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
 
-            # Starting EPC
-            start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
-        else
-            echo "We will use EPC on $EPC_IPADDR"
-            EPC_VM_IP_ADDR=$EPC_IPADDR
-        fi
+        # Starting EPC
+        start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
 
         # Retrieve EPC real IP address
         retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
@@ -1270,7 +1277,8 @@ function run_test_on_vm {
         do
           for BW in ${BW_CASES[@]}
           do
-              # Not Running in TDD-20MHz : too unstable
+              # Not Running in TDD-10MHz and TDD-20MHz : too unstable
+              #if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*10.* ]]; then continue; fi
               if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then continue; fi
 
               if [[ $BW =~ .*05.* ]]; then PRB=25; fi
@@ -1292,9 +1300,15 @@ function run_test_on_vm {
               if [ $UE_SYNC -eq 0 ]
               then
                   echo "Problem w/ eNB and UE not syncing"
-                  full_terminate
+                  terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0
+                  scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
+                  scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
+                  recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
+                  terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
+                  full_basic_sim_destroy
+                  echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
                   STATUS=-1
-                  continue
+                  return
               fi
               get_ue_ip_addr $VM_CMDS $VM_IP_ADDR 1
 
@@ -1439,10 +1453,7 @@ function run_test_on_vm {
         echo "Terminate EPC"
         echo "############################################################"
 
-        if [[ "$EPC_IPADDR" == "" ]]
-        then
-            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
-        fi
+        terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
 
         full_basic_sim_destroy
 
@@ -1470,56 +1481,43 @@ function run_test_on_vm {
             rm -Rf $ARCHIVES_LOC
         fi
         mkdir --parents $ARCHIVES_LOC
-        if [[ "$EPC_IPADDR" == "" ]]
-        then
+
         # Creating a VM for EPC and installing SW
-            EPC_VM_NAME=`echo $VM_NAME | sed -e "s#rf-sim#epc#"`
-            EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
-            LTEBOX=0
-            install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
-            EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
-        fi
+        EPC_VM_NAME=`echo $VM_NAME | sed -e "s#rf-sim#epc#"`
+        EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
+        LTEBOX=0
+        install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
+        EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
+
         # withS1 configuration is not working
         #EPC_CONFIGS=("wS1" "noS1")
         #TRANS_MODES=("fdd" "tdd")
         #BW_CASES=(05 10 20)
-        EPC_CONFIGS=("noS1" "wS1")
+        EPC_CONFIGS=("noS1")
         TRANS_MODES=("fdd")
         BW_CASES=(05)
         for CN_CONFIG in ${EPC_CONFIGS[@]}
         do
           if [[ $CN_CONFIG =~ .*wS1.* ]]
           then
-              if [[ "$EPC_IPADDR" ==  "" ]]
-              then
-                  echo "############################################################"
-                  echo "Start EPC for the wS1 configuration"
-                  echo "############################################################"
-                  start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
-                  # Retrieve EPC real IP address
-                  retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
-                  S1_NOS1_CFG=1
-              else
-                  echo "############################################################"
-                  echo "Using external EPC " $EPC_IPADDR
-                  echo "############################################################"
-                  $EPC_VM_IP_ADDR=$EPC_IPADDR
-                  S1_NOS1_CFG=1
-                  LTEBOX=0
-              fi
-          else
-              if [[ "$EPC_IPADDR" ==  "" ]]
-              then
-                  echo "############################################################"
-                  echo "Terminate EPC"
-                  echo "############################################################"
-                  terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
+              echo "############################################################"
+              echo "Start EPC for the wS1 configuration"
+              echo "############################################################"
+              start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
 
-                  echo "############################################################"
-                  echo "Running now in a no-S1 "
-                  echo "############################################################"
-                  S1_NOS1_CFG=0
-              fi
+              # Retrieve EPC real IP address
+              retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
+              S1_NOS1_CFG=1
+          else
+              echo "############################################################"
+              echo "Terminate EPC"
+              echo "############################################################"
+              terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
+
+              echo "############################################################"
+              echo "Running now in a no-S1 configuration"
+              echo "############################################################"
+              S1_NOS1_CFG=0
           fi
           for TMODE in ${TRANS_MODES[@]}
           do
@@ -1541,7 +1539,7 @@ function run_test_on_vm {
                   echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode"
                   echo "############################################################"
                   CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_enb.log
-                  start_rf_sim_enb $ENB_VM_CMDS "$ENB_VM_IP_ADDR" "$EPC_VM_IP_ADDR" $CURRENT_ENB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
+                  start_rf_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
 
                   echo "############################################################"
                   echo "${CN_CONFIG} : Starting the UE"
@@ -1741,8 +1739,14 @@ function run_test_on_vm {
                     terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
                     scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
                     scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
+                    if [ $S1_NOS1_CFG -eq 1 ]
+                    then
+                        terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
+                    fi
+                    full_l2_sim_destroy
+                    echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
                     STATUS=-1
-                    continue
+                    return
                 fi
 
                 if [ $S1_NOS1_CFG -eq 1 ]
@@ -1843,7 +1847,7 @@ function run_test_on_vm {
                     fi
                 fi
 
-                if [ $S1_NOS1_CFG -eq 2 ]
+                if [ $S1_NOS1_CFG -eq 0 ]
                 then
                     get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
                     echo "############################################################"

ci-scripts/waitBuildOnVM.sh

@@ -25,7 +25,7 @@ function wait_usage {
     echo "   Original Author: Raphael Defosseux"
     echo "   Requirements:"
     echo "     -- uvtool uvtool-libvirt apt-cacher"
-    echo "     -- $VM_OSREL image already synced"
+    echo "     -- xenial image already synced"
     echo "   Default:"
     echo "     -- eNB with USRP"
     echo ""
@@ -33,7 +33,28 @@ function wait_usage {
     echo "------"
     echo "    oai-ci-vm-tool wait [OPTIONS]"
     echo ""
-    command_options_usage
+    echo "Mandatory Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    variant_usage
+    echo "    Specify the variant to build."
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --keep-vm-alive OR -k"
+    echo "    Keep the VM alive after the build."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
 }
 
 function wait_on_vm_build {

ci-scripts/xml_files/enb_ue_usrp210_band7_epc_start.xml

@@ -25,23 +25,10 @@
 	<htmlTabName>EPC-Start</htmlTabName>
 	<htmlTabIcon>log-in</htmlTabIcon>
 	<TestCaseRequestedList>
- 010101 090101
  050101 060101 070101
 	</TestCaseRequestedList>
 	<TestCaseExclusionList></TestCaseExclusionList>
 
-        <testCase id="010101">
-                <class>Build_eNB</class>
-                <desc>Build eNB (USRP)</desc>
-                <Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-        </testCase>
-
-        <testCase id="090101">
-                <class>Build_OAI_UE</class>
-                <desc>Build OAI UE</desc>
-                <Build_OAI_UE_args>-w USRP --UE</Build_OAI_UE_args>
-        </testCase>
-
 	<testCase id="050101">
 		<class>Initialize_HSS</class>
 		<desc>Initialize HSS</desc>

ci-scripts/xml_files/enb_ue_usrp210_band7_test_05mhz_tm1.xml

@@ -24,7 +24,6 @@
 	<htmlTabRef>test-05-tm1-nos1-tunnel</htmlTabRef>
 	<htmlTabName>Test-05MHz-TM1-noS1-tunnel</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
 	<TestCaseRequestedList>
  030201 090109
  030101 000001 090101 000002 040501 040502 000001 040601 040602 040641 040642 000001 090109 030201

ci-scripts/xml_files/enb_ue_usrp210_band7_test_05mhz_tm1_mbms_no_s1.xml

@@ -1,82 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-05-tm1-mbms-nos1-tunnel</htmlTabRef>
-	<htmlTabName>Test-05MHz-MBMS-TM1-noS1-tunnel</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>2</repeatCount>
-	<TestCaseRequestedList>
- 030201 090109
- 030103 000001 090103 000002 040605 000001 090109 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="000001">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>15</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="000003">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>60</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="030103">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz/MBMS)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band17.tm1.mbms.25PRB.usrpb210.conf --noS1 --eNBs.[0].rrc_inactivity_threshold 0 --nokrnmod 1 --eNBs.[0].component_carriers.[0].eutra_band 7 --eNBs.[0].component_carriers.[0].downlink_frequency 2680000000 --eNBs.[0].component_carriers.[0].uplink_frequency_offset -120000000</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="090103">
-		<class>Initialize_OAI_UE</class>
-		<desc>Initialize OAI UE (FDD/Band7/5MHz/MBMS)</desc>
-		<Initialize_OAI_UE_args>-C 2680000000 -r 25 --ue-rxgain 120 --ue-txgain 0 --ue-max-power 0 --ue-scan-carrier --nokrnmod 1 --noS1</Initialize_OAI_UE_args>
-	</testCase>
-
-	<testCase id="090109">
-		<class>Terminate_OAI_UE</class>
-		<desc>Terminate OAI UE</desc>
-	</testCase>
-
-	<testCase id="040605">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/1.5Mbps/UDP/MBMS-sink)(20 sec)</desc>
-		<iperf_args>-c 10.0.2.2 -u -b 1.5M -t 20 -i 1 -fm -B 10.0.2.1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_options>sink</iperf_options>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_ue_usrp210_band7_test_05mhz_tm1_s1.xml

@@ -24,7 +24,6 @@
 	<htmlTabRef>test-05-tm1-tunnel</htmlTabRef>
 	<htmlTabName>Test-05MHz-TM1-tunnel</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>2</repeatCount>
 	<TestCaseRequestedList>
  030201 090109
  030102 000001 090102 000002 040503 000001 040603 040604 040643 040644 000001 090109 030201

ci-scripts/xml_files/enb_usrp210_band13_epc_closure.xml

@@ -25,16 +25,10 @@
 	<htmlTabName>EPC-Closure</htmlTabName>
 	<htmlTabIcon>log-out</htmlTabIcon>
 	<TestCaseRequestedList>
- 040202
  050201 060201 070201
 	</TestCaseRequestedList>
 	<TestCaseExclusionList></TestCaseExclusionList>
 
-	<testCase id="040202">
-		<class>Terminate_CatM_module</class>
-		<desc>Terminate CAT-M Module</desc>
-	</testCase>
-
 	<testCase id="050201">
 		<class>Terminate_HSS</class>
 		<desc>Terminate HSS</desc>

ci-scripts/xml_files/enb_usrp210_band13_test_10mhz_tm1.xml

@@ -24,7 +24,6 @@
 	<htmlTabRef>test-10-tm1</htmlTabRef>
 	<htmlTabName>Test-10MHz-TM1</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>2</repeatCount>
 	<TestCaseRequestedList>
  030201
  040102

ci-scripts/xml_files/enb_usrp210_band40_test_05mhz_tm2.xml

@@ -1,152 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
- 030105 040301 040502 040606 040601 040603 040608 040605 040646 040641 040643 040648 040645 040401 040201 030201
--->
-<testCaseList>
-	<htmlTabRef>test-05-tm2</htmlTabRef>
-	<htmlTabName>Test-05MHz-TM2</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>3</repeatCount>
-        <TestCaseRequestedList>
- 030201
- 040101
- 030105 040301 040502 040606 040608 040646 040648 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030105">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (TDD/Band40/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm2.25PRB.FairScheduler.usrpb210.conf --MACRLCs.[0].scheduler_mode default</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-        <testCase id="040301">
-                <class>Attach_UE</class>
-                <desc>Attach UE</desc>
-        </testCase>
-
-        <testCase id="040401">
-                <class>Detach_UE</class>
-                <desc>Detach UE</desc>
-        </testCase>
-
-        <testCase id="040502">
-                <class>Ping</class>
-                <desc>ping (5MHz - 20 sec)</desc>
-                <ping_args>-c 20</ping_args>
-                <ping_packetloss_threshold>25</ping_packetloss_threshold>
-        </testCase>
-
-        <testCase id="040601">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(balanced)</desc>
-		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040606">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040603">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/6.5Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 6.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-        </testCase>
-
-        <testCase id="040608">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-        </testCase>
-
-        <testCase id="040605">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/TCP)(30 sec)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-        </testCase>
-
-	<testCase id="040641">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(balanced)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040646">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040643">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040648">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/TCP)(30 sec)(single-ue)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040645">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/TCP)(30 sec)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band40_test_20mhz_tm1.xml

@@ -27,7 +27,7 @@
 	<TestCaseRequestedList>
  030201
  040101
- 030124 040301 040521 040622 040621 040623 040662 040401 040201 030201
+ 030124 040301 040521 040622 040621 040623 040624 040625 040662 040661 040663 040664 040665 040401 040201 030201
 	</TestCaseRequestedList>
 	<TestCaseExclusionList></TestCaseExclusionList>
 

ci-scripts/xml_files/enb_usrp210_band40_test_20mhz_tm1_default_scheduler.xml

@@ -1,150 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-20-tm1-defSched</htmlTabRef>
-	<htmlTabName>Test-20MHz-TM1-default-scheduler</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 030201
- 040101
- 030125 040301 040522 040627 040626 040628 040629 040630 040667 040666 040668 040669 040670 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030125">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (TDD/Band40/20MHz/info)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf --MACRLCs.[0].scheduler_mode default</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-	<testCase id="040301">
-		<class>Attach_UE</class>
-		<desc>Attach UE</desc>
-	</testCase>
-
-	<testCase id="040401">
-		<class>Detach_UE</class>
-		<desc>Detach UE</desc>
-	</testCase>
-
-	<testCase id="040522">
-		<class>Ping</class>
-		<desc>ping (20MHz - 20 sec)</desc>
-		<ping_args>-c 20</ping_args>
-		<ping_packetloss_threshold>25</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040626">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/27.5Mbps/UDP)(30 sec)(balanced)</desc>
-		<iperf_args>-u -b 27.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040627">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/27.5Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 27.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040628">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/27.5Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 27.5M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040629">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/TCP)(30 sec)(single-ue)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040630">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - DL/TCP)(30 sec)</desc>
-		<iperf_args>-t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040666">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/7Mbps/UDP)(30 sec)(balanced)</desc>
-		<iperf_args>-u -b 7M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040667">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/7Mbps/UDP)(30 sec)(single-ue)</desc>
-		<iperf_args>-u -b 7M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040668">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/7Mbps/UDP)(30 sec)(unbalanced)</desc>
-		<iperf_args>-u -b 7M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>unbalanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040669">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/TCP)(30 sec)(single-ue)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040670">
-		<class>Iperf</class>
-		<desc>iperf (20MHz - UL/TCP)(30 sec)</desc>
-		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/enb_usrp210_band7_test_05mhz_tm1.xml

@@ -30,15 +30,15 @@
  030101 040301 040501 040603 040604 040605 040606 040607 040641 040642 040643 040644 040401 040201 030201
  030102 000010 040301 040502 000011 040302 000001 000012 040303 000002 000013 040503 040401 040201 030201
  050102
- 030103 000020 040301 040504 000021 040302 000001 000022 040303 000002 040504 000023 040401 040201 030201
+ 030102 000020 040301 040504 000021 040302 000001 000022 040303 000002 040504 000023 040401 040201 030201
  050202
 	</TestCaseRequestedList>
 	<TestCaseExclusionList></TestCaseExclusionList>
 
 	<testCase id="000001">
 		<class>IdleSleep</class>
-		<desc>Waiting for 45 seconds</desc>
-		<idle_sleep_time_in_sec>45</idle_sleep_time_in_sec>
+		<desc>Waiting for 35 seconds</desc>
+		<idle_sleep_time_in_sec>35</idle_sleep_time_in_sec>
 	</testCase>
 
 	<testCase id="000002">
@@ -113,13 +113,13 @@
 
 	<testCase id="030102">
 		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz) for RRC Inactivity Timer testing -- no FlexRan Ctl</desc>
+		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
 		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
 	</testCase>
 
 	<testCase id="030103">
 		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz) for RRC Inactivity Timer testing -- with FlexRan Ctl</desc>
+		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
 		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
 	</testCase>
 

ci-scripts/xml_files/enb_usrp210_band7_test_10mhz_tm1.xml

@@ -34,7 +34,7 @@
 	<testCase id="030111">
 		<class>Initialize_eNB</class>
 		<desc>Initialize eNB (FDD/Band7/10MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf --eNBs.[0].component_carriers.[0].drx_Config_present prRelease</Initialize_eNB_args>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf</Initialize_eNB_args>
 	</testCase>
 
 	<testCase id="030201">

ci-scripts/xml_files/enb_usrp210_band7_test_10mhz_tm1_cdrx.xml

@@ -1,89 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-10-cdrx-tm1</htmlTabRef>
-	<htmlTabName>Test-10MHz-CDRX-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
-	<TestCaseRequestedList>
- 030201
- 040101
- 030112 040302 040512 040612 040650 040401 040201 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030112">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/10MHz) with CDRX</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf  --eNBs.[0].component_carriers.[0].drx_Config_present prSetup</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-	<testCase id="040302">
-		<class>Attach_UE</class>
-		<desc>Attach UE</desc>
-	</testCase>
-
-	<testCase id="040401">
-		<class>Detach_UE</class>
-		<desc>Detach UE</desc>
-	</testCase>
-
-	<testCase id="040512">
-		<class>Ping</class>
-		<desc>ping (10MHz - 20 sec)</desc>
-		<ping_args>-c 20</ping_args>
-		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040612">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - DL/30Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 30M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040650">
-		<class>Iperf</class>
-		<desc>iperf (10MHz - UL/20Mbps/UDP)(30 sec)(balanced profile)</desc>
-		<iperf_args>-u -b 20M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/f1_usrp210_band7_test_05mhz.xml

@@ -22,23 +22,16 @@
 -->
 <testCaseList>
 	<htmlTabRef>test-f1-05</htmlTabRef>
-	<htmlTabName>Test-F1-CU-DU-05MHz</htmlTabName>
+	<htmlTabName>Test-F1-CU/DU-05MHz</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>2</repeatCount>
 	<TestCaseRequestedList>
  030201
  040101
- 030142 030141 000002 040301 000002 040541 040601 040641 040401 040201 030201 030202
+ 030142 030141 040301 040541 040601 040641 040401 040201 030201 030202
 	</TestCaseRequestedList>
 	<TestCaseExclusionList>
 	</TestCaseExclusionList>
 
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
-	</testCase>
-
 	<testCase id="030141">
 		<class>Initialize_eNB</class>
 		<desc>Initialize DU (FDD/Band7/5MHz)</desc>

ci-scripts/xml_files/f1_usrp210_band7_test_10mhz.xml

@@ -22,23 +22,16 @@
 -->
 <testCaseList>
 	<htmlTabRef>test-f1-10</htmlTabRef>
-	<htmlTabName>Test-F1-CU-DU-10MHz</htmlTabName>
+	<htmlTabName>Test-F1-CU/DU-10MHz</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
 	<TestCaseRequestedList>
  030201
  040101
- 030152 030151 000002 040301 000002 040551 040611 040651 040401 040201 030201 030202
+ 030152 030151 040301 040551 040611 040651 040401 040201 030201 030202
 	</TestCaseRequestedList>
 	<TestCaseExclusionList>
 	</TestCaseExclusionList>
 
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
-	</testCase>
-
 	<testCase id="030151">
 		<class>Initialize_eNB</class>
 		<desc>Initialize DU (FDD/Band7/10MHz)</desc>

ci-scripts/xml_files/f1_usrp210_band7_test_20mhz.xml

@@ -22,23 +22,16 @@
 -->
 <testCaseList>
 	<htmlTabRef>test-f1-20</htmlTabRef>
-	<htmlTabName>Test-F1-CU-DU-20MHz</htmlTabName>
+	<htmlTabName>Test-F1-CU/DU-20MHz</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
 	<TestCaseRequestedList>
  030201
  040101
- 030162 030161 000002 040301 000002 040561 040621 040661 040401 040201 030201 030202
+ 030162 030161 040301 040561 040621 040661 040401 040201 030201 030202
 	</TestCaseRequestedList>
 	<TestCaseExclusionList>
 	</TestCaseExclusionList>
 
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
-	</testCase>
-
 	<testCase id="030161">
 		<class>Initialize_eNB</class>
 		<desc>Initialize DU (FDD/Band7/20MHz)</desc>

ci-scripts/xml_files/if4p5_usrp210_band40_test_20mhz.xml

@@ -24,7 +24,6 @@
 	<htmlTabRef>test-20</htmlTabRef>
 	<htmlTabName>Test-20MHz</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>2</repeatCount>
 	<TestCaseRequestedList>
  030201
  040101
@@ -43,7 +42,7 @@
 	<testCase id="030125">
 		<class>Initialize_eNB</class>
 		<desc>Initialize RCC (TDD/Band40/20MHz/info)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf --MACRLCs.[0].scheduler_mode default</Initialize_eNB_args>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf</Initialize_eNB_args>
 		<eNB_instance>1</eNB_instance>
 	</testCase>
 

ci-scripts/xml_files/inria/enb_ue_usrp210_band7_epc_start.xml

@@ -1,53 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-start-oai-ue</htmlTabRef>
-	<htmlTabName>EPC-Start-OAI-UE</htmlTabName>
-	<htmlTabIcon>log-in</htmlTabIcon>
-	<TestCaseRequestedList>
- 050101 000001 060101 000001 070101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-    <testCase id="000001">
-        <class>IdleSleep</class>
-        <desc>Sleep</desc>
-        <idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
-    </testCase>
-
-	<testCase id="050101">
-		<class>Initialize_HSS</class>
-		<desc>Initialize HSS</desc>
-	</testCase>
-
-	<testCase id="060101">
-		<class>Initialize_MME</class>
-		<desc>Initialize MME</desc>
-	</testCase>
-
-	<testCase id="070101">
-		<class>Initialize_SPGW</class>
-		<desc>Initialize SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_ue_usrp210_band7_epc_stop.xml

@@ -1,47 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-closure</htmlTabRef>
-	<htmlTabName>EPC-Closure</htmlTabName>
-	<htmlTabIcon>log-out</htmlTabIcon>
-	<TestCaseRequestedList>
- 050201 060201 070201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="050201">
-		<class>Terminate_HSS</class>
-		<desc>Terminate HSS</desc>
-	</testCase>
-
-	<testCase id="060201">
-		<class>Terminate_MME</class>
-		<desc>Terminate MME</desc>
-	</testCase>
-
-	<testCase id="070201">
-		<class>Terminate_SPGW</class>
-		<desc>Terminate SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_ue_usrp210_band7_terminate.xml

@@ -1,42 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>terminate-enb-oai-ue</htmlTabRef>
-	<htmlTabName>Terminate-all-eNBs-OAI-UEs</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 030201 090109
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="090109">
-		<class>Terminate_OAI_UE</class>
-		<desc>Terminate OAI UE</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_ue_usrp210_band7_test_05mhz_tm1.xml

@@ -1,103 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-05-tm1-oai-ue</htmlTabRef>
-	<htmlTabName>Test-05MHz-TM1-OAI-UE</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
-	<TestCaseRequestedList>
- 030201 090109
- 030102 000001 090102 000002 040503 000002 040603 040604 040643 040644 000002 090109 000001 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="000001">
-		<class>IdleSleep</class>
-		<desc>Sleep for 10 sec</desc>
-		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Sleep for 3 sec</desc>
-		<idle_sleep_time_in_sec>3</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="030102">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --eNBs.[0].rrc_inactivity_threshold 0 --RUs.[0].max_rxgain 120 --eNBs.[0].component_carriers.[0].pusch_p0_Nominal -90 --eNBs.[0].component_carriers.[0].pucch_p0_Nominal -96 --eNBs.[0].tracking_area_code 600 --eNBs.[0].plmn_list.[0].mnc 95 --THREAD_STRUCT.[0].parallel_config PARALLEL_RU_L1_TRX_SPLIT</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="090102">
-		<class>Initialize_OAI_UE</class>
-		<desc>Initialize OAI UE (FDD/Band7/5MHz)</desc>
-		<Initialize_OAI_UE_args>-C 2680000000 -r 25 --ue-rxgain 130 --ue-txgain 1 --ue-max-power -6 --ue-scan-carrier --nokrnmod 1</Initialize_OAI_UE_args>
-	</testCase>
-
-	<testCase id="090109">
-		<class>Terminate_OAI_UE</class>
-		<desc>Terminate OAI UE</desc>
-	</testCase>
-
-	<testCase id="040503">
-		<class>Ping</class>
-		<desc>ping (5MHz - 20 sec)</desc>
-		<ping_args>-I 192.168.248.159 -c 20</ping_args>
-       		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040603">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/1Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 1M -t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040604">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/12Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 12M -t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040643">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/1Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 1M -t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040644">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_ue_usrp210_band7_test_05mhz_tm1_nos1.xml

@@ -1,118 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-05-tm1-nos1-tunnel</htmlTabRef>
-	<htmlTabName>Test-05MHz-TM1-noS1-tunnel</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>2</repeatCount>
-	<TestCaseRequestedList>
- 030201 090109
- 030101 000001 090101 000002 040501 040502 000001 040601 040602 040641 040642 000001 090109 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="000001">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="000003">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>60</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="030101">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --noS1 --eNBs.[0].rrc_inactivity_threshold 0 --RUs.[0].max_rxgain 120 --eNBs.[0].component_carriers.[0].pusch_p0_Nominal -90 --eNBs.[0].component_carriers.[0].pucch_p0_Nominal -96 --eNBs.[0].tracking_area_code 600 --eNBs.[0].plmn_list.[0].mnc 95 --THREAD_STRUCT.[0].parallel_config PARALLEL_RU_L1_TRX_SPLIT</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="090101">
-		<class>Initialize_OAI_UE</class>
-		<desc>Initialize OAI UE (FDD/Band7/5MHz)</desc>
-		<Initialize_OAI_UE_args>-C 2680000000 -r 25 --ue-rxgain 130 --ue-txgain 1 --ue-max-power -6 --ue-scan-carrier --nokrnmod 1 --noS1</Initialize_OAI_UE_args>
-	</testCase>
-
-	<testCase id="090109">
-		<class>Terminate_OAI_UE</class>
-		<desc>Terminate OAI UE</desc>
-	</testCase>
-
-	<testCase id="040501">
-		<class>Ping</class>
-		<desc>ping (5MHz - 20 sec)(from eNB to OAI UE)</desc>
-		<ping_args>-I oaitun_enb1 -c 20 10.0.1.2</ping_args>
-		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040502">
-		<class>Ping</class>
-		<desc>ping (5MHz - 20 sec)(from OAI UE to eNB)</desc>
-		<ping_args>-I oaitun_ue1 -c 20 10.0.1.1</ping_args>
-		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040601">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/1Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-c 10.0.1.2 -u -b 1M -t 30 -i 1 -fm -B 10.0.1.1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040602">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/10Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-c 10.0.1.2 -u -b 10M -t 30 -i 1 -fm -B 10.0.1.1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040641">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/1Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-c 10.0.1.1 -u -b 1M -t 30 -i 1 -fm -B 10.0.1.2 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-	<testCase id="040642">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-c 10.0.1.1 -u -b 2M -t 30 -i 1 -fm -B 10.0.1.2 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>balanced</iperf_profile>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_usrp210_band7_build.xml

@@ -1,38 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab-enb0</htmlTabRef>
-	<htmlTabName>Build eNB0</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-	<TestCaseRequestedList>
- 010101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build eNB (USRP)</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_usrp210_band7_epc_start.xml

@@ -1,53 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-start</htmlTabRef>
-	<htmlTabName>EPC-Start</htmlTabName>
-	<htmlTabIcon>log-in</htmlTabIcon>
-	<TestCaseRequestedList>
- 050102 000001 060102 000001 070102
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-    <testCase id="000001">
-        <class>IdleSleep</class>
-        <desc>Sleep</desc>
-        <idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
-    </testCase>
-
-	<testCase id="050102">
-		<class>Initialize_HSS</class>
-		<desc>Initialize HSS</desc>
-	</testCase>
-
-	<testCase id="060102">
-		<class>Initialize_MME</class>
-		<desc>Initialize MME</desc>
-	</testCase>
-
-	<testCase id="070102">
-		<class>Initialize_SPGW</class>
-		<desc>Initialize SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_usrp210_band7_epc_stop.xml

@@ -1,53 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-stop</htmlTabRef>
-	<htmlTabName>EPC-Stop</htmlTabName>
-	<htmlTabIcon>log-out</htmlTabIcon>
-	<TestCaseRequestedList>
- 050201 060201 070201
- 040101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="050201">
-		<class>Terminate_HSS</class>
-		<desc>Terminate HSS</desc>
-	</testCase>
-
-	<testCase id="060201">
-		<class>Terminate_MME</class>
-		<desc>Terminate MME</desc>
-	</testCase>
-
-	<testCase id="070201">
-		<class>Terminate_SPGW</class>
-		<desc>Terminate SPGW</desc>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/enb_usrp210_band7_test_05mhz_tm1.xml

@@ -1,108 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
- 030102 000002 040301 000002 040504 040605 040606 040645 040646 000001 040401 000002 030201
--->
-<testCaseList>
-	<htmlTabRef>test-05-tm1</htmlTabRef>
-	<htmlTabName>Test-05MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>2</repeatCount>
-	<TestCaseRequestedList>
- 030201 040101
- 030102 000002 040301 000002 040504 000001 040401 000002 030201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="000001">
-		<class>IdleSleep</class>
-		<desc>Sleep for 10 sec</desc>
-		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Sleep for 3 sec</desc>
-		<idle_sleep_time_in_sec>3</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="030102">
-		<class>Initialize_eNB</class>
-		<desc>Initialize eNB (FDD/Band7/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf --eNBs.[0].rrc_inactivity_threshold 0 --RUs.[0].max_rxgain 120 --eNBs.[0].component_carriers.[0].pusch_p0_Nominal -90 --eNBs.[0].component_carriers.[0].pucch_p0_Nominal -96 --eNBs.[0].tracking_area_code 600 --eNBs.[0].plmn_list.[0].mnc 95 --THREAD_STRUCT.[0].parallel_config PARALLEL_RU_L1_TRX_SPLIT</Initialize_eNB_args>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate eNB</desc>
-	</testCase>
-
-	<testCase id="040301">
-		<class>Attach_UE</class>
-		<desc>Attach UE</desc>
-	</testCase>
-
-	<testCase id="040401">
-		<class>Detach_UE</class>
-		<desc>Detach UE</desc>
-	</testCase>
-
-	<testCase id="040504">
-		<class>Ping</class>
-		<desc>ping (5MHz - 20 sec)</desc>
-		<ping_args>-I 192.168.248.159 -c 20</ping_args>
-		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040605">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/1Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 1M -t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040606">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/12Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 12M -t 30 -i 1 -fm</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040645">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/1Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 1M -t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040646">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/2Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 2M -t 30 -i 1 -fm -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/inria/ue_usrp210_band7_build.xml

@@ -1,38 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab-ue0</htmlTabRef>
-	<htmlTabName>Build UE0</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-	<TestCaseRequestedList>
-090101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="090101">
-		<class>Build_OAI_UE</class>
-		<desc>Build OAI UE</desc>
-		<Build_OAI_UE_args>-w USRP --UE</Build_OAI_UE_args>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/multi_rru_band38_build.xml

@@ -1,84 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-	<TestCaseRequestedList>
- 010101 010102 010103
- 000101 000102 000103
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build RCC</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-		<backgroundBuild>True</backgroundBuild>
-	</testCase>
-
-	<testCase id="000101">
-		<class>WaitEndBuild_eNB</class>
-		<desc>Wait for end of Build RCC</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="010102">
-		<class>Build_eNB</class>
-		<desc>Build Master RRU</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-		<backgroundBuild>True</backgroundBuild>
-	</testCase>
-
-	<testCase id="000102">
-		<class>WaitEndBuild_eNB</class>
-		<desc>Wait for end of Build Master RRU</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="010103">
-		<class>Build_eNB</class>
-		<desc>Build Slave RRU</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>2</eNB_instance>
-		<eNB_serverId>2</eNB_serverId>
-		<backgroundBuild>True</backgroundBuild>
-	</testCase>
-
-	<testCase id="000103">
-		<class>WaitEndBuild_eNB</class>
-		<desc>Wait for end of Build Slave RRU</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>2</eNB_instance>
-		<eNB_serverId>2</eNB_serverId>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/multi_rru_band38_full_termination.xml

@@ -1,53 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-full-termintation</htmlTabRef>
-	<htmlTabName>Test-RCC-RRUs-Termination</htmlTabName>
-	<htmlTabIcon>off</htmlTabIcon>
-	<TestCaseRequestedList>
- 030211 030212 030213
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030211">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="030212">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Master RRU</desc>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="030213">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Slave RRU</desc>
-		<eNB_instance>2</eNB_instance>
-		<eNB_serverId>2</eNB_serverId>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/multi_rru_band38_test_10mhz_tm1.xml

@@ -1,87 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-multi-rru-10</htmlTabRef>
-	<htmlTabName>Test-Multi-RRU-10MHz</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
-	<TestCaseRequestedList>
- 030211 030212 030213
- 030111 030112 030113
- 000001
- 030211 030212 030213
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="000001">
-		<class>IdleSleep</class>
-		<desc>Sleep</desc>
-		<idle_sleep_time_in_sec>60</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="030111">
-		<class>Initialize_eNB</class>
-		<desc>Initialize RCC (TDD/Band38/10MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band38.tm1.50PRB.multi.rru.conf --noS1</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="030112">
-		<class>Initialize_eNB</class>
-		<desc>Initialize Master RRU (TDD/Band38/10MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.band38.tm1.master.conf --noS1</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="030113">
-		<class>Initialize_eNB</class>
-		<desc>Initialize Slave RRU (TDD/Band38/10MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/rru.band38.tm1.slave.conf --noS1</Initialize_eNB_args>
-		<eNB_instance>2</eNB_instance>
-		<eNB_serverId>2</eNB_serverId>
-	</testCase>
-
-	<testCase id="030211">
-		<class>Terminate_eNB</class>
-		<desc>Terminate RCC</desc>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="030212">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Master RRU</desc>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="030213">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Slave RRU</desc>
-		<eNB_instance>2</eNB_instance>
-		<eNB_serverId>2</eNB_serverId>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/simple_dummy_build.xml

@@ -1,41 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-	<TestCaseRequestedList>
- 010101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build Master eNB (USRP)</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/ue_band20_test_10mhz_orange.xml

@@ -24,7 +24,6 @@
 	<htmlTabRef>test-10mhz-orange</htmlTabRef>
 	<htmlTabName>Test-10Mhz-Orange</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>	
-	<repeatCount>4</repeatCount>	
 	<TestCaseRequestedList>
  090109
  090110 000001 090109

ci-scripts/xml_files/ue_band20_test_10mhz_sfr.xml

@@ -24,7 +24,6 @@
 	<htmlTabRef>test-10mHz-sfr</htmlTabRef>
 	<htmlTabName>Test-10MHz-SFR</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
 	<TestCaseRequestedList>
  090109
  090111 000001 090109

ci-scripts/xml_files/x2ho_enb_usrp210_band13_build.xml

@@ -1,66 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>build-tab</htmlTabRef>
-	<htmlTabName>Build</htmlTabName>
-	<htmlTabIcon>wrench</htmlTabIcon>
-	<TestCaseRequestedList>
- 010101
- 010102
- 050101 060101 070101
-	</TestCaseRequestedList>
-	<TestCaseExclusionList>
-	</TestCaseExclusionList>
-
-	<testCase id="010101">
-		<class>Build_eNB</class>
-		<desc>Build Master eNB (USRP)</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="010102">
-		<class>Build_eNB</class>
-		<desc>Build Slave eNB (USRP)</desc>
-		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="050101">
-		<class>Initialize_HSS</class>
-		<desc>Initialize HSS</desc>
-	</testCase>
-
-	<testCase id="060101">
-		<class>Initialize_MME</class>
-		<desc>Initialize MME</desc>
-	</testCase>
-
-	<testCase id="070101">
-		<class>Initialize_SPGW</class>
-		<desc>Initialize SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/x2ho_enb_usrp210_band13_epc_closure.xml

@@ -1,47 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>epc-closure</htmlTabRef>
-	<htmlTabName>EPC-Closure</htmlTabName>
-	<htmlTabIcon>log-out</htmlTabIcon>
-	<TestCaseRequestedList>
- 050201 060201 070201
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="050201">
-		<class>Terminate_HSS</class>
-		<desc>Terminate HSS</desc>
-	</testCase>
-
-	<testCase id="060201">
-		<class>Terminate_MME</class>
-		<desc>Terminate MME</desc>
-	</testCase>
-
-	<testCase id="070201">
-		<class>Terminate_SPGW</class>
-		<desc>Terminate SPGW</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/x2ho_enb_usrp210_band13_full_terminate.xml

@@ -1,52 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-	<htmlTabRef>test-x2-ho-full-end</htmlTabRef>
-	<htmlTabName>Test-X2-HO-Full-Terminate</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<TestCaseRequestedList>
- 030201 030202
- 050202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Master eNB</desc>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Slave eNB</desc>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="050202">
-		<class>Terminate_FlexranCtrl</class>
-		<desc>Stopping Flexran Controller</desc>
-	</testCase>
-
-</testCaseList>

ci-scripts/xml_files/x2ho_enb_usrp210_band13_test_05mhz_tm1.xml

@@ -1,191 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
- 030101 000002 030102 040301 040501 040601 040641 050401 000002 040502 040602 040642 050402 000002 040503 040603 040643 040401 040201 030201 030202
--->
-<testCaseList>
-	<htmlTabRef>test-x2-ho-05-tm1</htmlTabRef>
-	<htmlTabName>Test-X2-HO-FDD-05MHz-TM1</htmlTabName>
-	<htmlTabIcon>tasks</htmlTabIcon>
-	<repeatCount>4</repeatCount>
-	<TestCaseRequestedList>
- 030201 030202
- 040101
- 050102
- 030101 000002 030102 040301 040501 050401 000002 040502 050402 000002 040503 040401 040201 030201 030202
- 050202
-	</TestCaseRequestedList>
-	<TestCaseExclusionList></TestCaseExclusionList>
-
-	<testCase id="000001">
-		<class>IdleSleep</class>
-		<desc>Waiting for 60 seconds</desc>
-		<idle_sleep_time_in_sec>60</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="000002">
-		<class>IdleSleep</class>
-		<desc>Waiting for 10 seconds</desc>
-		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
-	</testCase>
-
-	<testCase id="050102">
-		<class>Initialize_FlexranCtrl</class>
-		<desc>Starting Flexran Controller</desc>
-	</testCase>
-
-	<testCase id="050202">
-		<class>Terminate_FlexranCtrl</class>
-		<desc>Stopping Flexran Controller</desc>
-	</testCase>
-
-	<testCase id="030101">
-		<class>Initialize_eNB</class>
-		<desc>Initialize Master eNB (FDD/Band7/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band13.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="030102">
-		<class>Initialize_eNB</class>
-		<desc>Initialize Slave eNB (FDD/Band7/5MHz)</desc>
-		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.slave.band13.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="030201">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Master eNB</desc>
-		<eNB_instance>0</eNB_instance>
-		<eNB_serverId>0</eNB_serverId>
-	</testCase>
-
-	<testCase id="030202">
-		<class>Terminate_eNB</class>
-		<desc>Terminate Slave eNB</desc>
-		<eNB_instance>1</eNB_instance>
-		<eNB_serverId>1</eNB_serverId>
-	</testCase>
-
-	<testCase id="040101">
-		<class>Initialize_UE</class>
-		<desc>Initialize UE</desc>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Terminate_UE</class>
-		<desc>Terminate UE</desc>
-	</testCase>
-
-	<testCase id="040301">
-		<class>Attach_UE</class>
-		<desc>Attach UE</desc>
-	</testCase>
-
-	<testCase id="040401">
-		<class>Detach_UE</class>
-		<desc>Detach UE</desc>
-	</testCase>
-
-	<testCase id="040501">
-		<class>Ping</class>
-		<desc>ping (5MHz - 20 sec)</desc>
-		<ping_args>-c 20</ping_args>
-		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040502">
-		<class>Ping</class>
-		<desc>ping (5MHz - 20 sec)</desc>
-		<ping_args>-c 20</ping_args>
-		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040503">
-		<class>Ping</class>
-		<desc>ping (5MHz - 20 sec)</desc>
-		<ping_args>-c 20</ping_args>
-		<ping_packetloss_threshold>5</ping_packetloss_threshold>
-	</testCase>
-
-	<testCase id="040601">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/8Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 8M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040602">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/8Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 8M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040603">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - DL/8Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 8M -t 30 -i 1</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040641">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/5Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 5M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040642">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/5Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 5M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="040643">
-		<class>Iperf</class>
-		<desc>iperf (5MHz - UL/5Mbps/UDP)(30 sec)</desc>
-		<iperf_args>-u -b 5M -t 30 -i 1 -R</iperf_args>
-		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
-		<iperf_profile>single-ue</iperf_profile>
-	</testCase>
-
-	<testCase id="050401">
-		<class>Perform_X2_Handover</class>
-		<desc>Doing a Flexran-Controlled X2 Handover</desc>
-		<x2_ho_options>network</x2_ho_options>
-	</testCase>
-
-	<testCase id="050402">
-		<class>Perform_X2_Handover</class>
-		<desc>Doing a Flexran-Controlled X2 Handover</desc>
-		<x2_ho_options>network</x2_ho_options>
-	</testCase>
-
-</testCaseList>

cmake_targets/CMakeLists.txt

@@ -174,7 +174,7 @@ set(CMAKE_C_FLAGS
 	"${CMAKE_C_FLAGS} -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_ARPA_INET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRERROR=1 -DHAVE_SOCKET=1 -DHAVE_MEMSET=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_LIBSCTP -D${MKVER}"
 )
 set(CMAKE_CXX_FLAGS
-	"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -Wno-packed-bitfield-compat -fPIC -Wall -fno-strict-aliasing -rdynamic -std=c++11 -D${MKVER}"
+	"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -std=c++11 -D${MKVER}"
 )
 
 
@@ -183,8 +183,8 @@ set(CMAKE_EXE_LINKER_FLAGS  "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath -Wl,${CMAKE_CU
 #########################
 # set a flag for changes in the source code
 # these changes are related to hardcoded path to include .h files
-set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g3 -DMALLOC_CHECK_=3")
-set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g3 -DMALLOC_CHECK_=3 -O2")
+set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
+set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
 
 
 set(GIT_BRANCH        "UNKNOWN")
@@ -405,7 +405,6 @@ add_library(S1AP_ENB
   )
 add_dependencies(S1AP_ENB rrc_flag s1ap_flag)
 
-
 #M2AP
 # Same limitation as described in RRC/S1AP: unknown generated file list
 # so we generate it at cmake time
@@ -426,15 +425,15 @@ elseif (${M2AP_RELEASE} STREQUAL "R14")
   make_version(M2AP_VERSION 14 0 0)
   set(M2AP_ASN_FILES m2ap-14.0.0.asn1)
 elseif (${M2AP_RELEASE} STREQUAL "R15")
-  make_version(M2AP_VERSION 15 1 0)
-  set(M2AP_ASN_FILES m2ap-15.1.0.asn1)
+  make_version(M2AP_VERSION 15 0 0)
+  set(M2AP_ASN_FILES m2ap-15.0.0.asn1)
 endif(${M2AP_RELEASE} STREQUAL "R8")
 add_definitions(-DM2AP_VERSION=${M2AP_VERSION})
 set(M2AP_ASN_DIR ${M2AP_DIR}/MESSAGES/ASN1/${M2AP_RELEASE})
 set(M2AP_C_DIR ${asn1_generated_dir}/M2AP_${M2AP_RELEASE})
 
 # Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
-execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M2AP_C_DIR}" "${M2AP_ASN_DIR}/${M2AP_ASN_FILES}"  "M2AP_" -fno-include-deps -DEMIT_ASN_DEBUG=1
+execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M2AP_C_DIR}" "${M2AP_ASN_DIR}/${M2AP_ASN_FILES}"  "M2AP_" -fno-include-deps
                 RESULT_VARIABLE ret)
 if (NOT ${ret} STREQUAL 0)
   message(FATAL_ERROR "${ret}: error")
@@ -458,91 +457,20 @@ include_directories ("${M2AP_C_DIR}")
 include_directories ("${M2AP_DIR}")
 
 add_library(M2AP_ENB
-  ${M2AP_DIR}/m2ap_eNB.c
-  ${M2AP_DIR}/m2ap_MCE.c
-  ${M2AP_DIR}/m2ap_decoder.c
-  ${M2AP_DIR}/m2ap_encoder.c
-  ${M2AP_DIR}/m2ap_MCE_handler.c
-  ${M2AP_DIR}/m2ap_eNB_handler.c
-  ${M2AP_DIR}/m2ap_itti_messaging.c
-  ${M2AP_DIR}/m2ap_eNB_management_procedures.c
-  ${M2AP_DIR}/m2ap_eNB_generate_messages.c
-  ${M2AP_DIR}/m2ap_MCE_management_procedures.c
-  ${M2AP_DIR}/m2ap_MCE_generate_messages.c
-  ${M2AP_DIR}/m2ap_ids.c
-  ${M2AP_DIR}/m2ap_timers.c
-  ${M2AP_DIR}/m2ap_MCE_interface_management.c
-  ${M2AP_DIR}/m2ap_eNB_interface_management.c
+  ${M2AP_DIR}/m2ap_common.c
+  #${M2AP_DIR}/m2ap_eNB.c
+  #${M2AP_DIR}/m2ap_decoder.c
+  #${M2AP_DIR}/m2ap_encoder.c
+  #${M2AP_DIR}/m2ap_handler.c
+  #${M2AP_DIR}/m2ap_itti_messaging.c
+  #${M2AP_DIR}/m2ap_eNB_management_procedures.c
+  #${M2AP_DIR}/m2ap_eNB_generate_messages.c
+  #${M2AP_DIR}/m2ap_ids.c
+  #${M2AP_DIR}/m2ap_timers.c
+  #${M2AP_DIR}/m2ap_MCE_interface_management.c
  )
 add_dependencies(M2AP_ENB rrc_flag m2_flag)
 
-#M3AP
-# Same limitation as described in RRC/S1AP: unknown generated file list
-# so we generate it at cmake time
-##############
-add_list1_option(M3AP_RELEASE R14 "M3AP ASN.1 grammar version" R14)
-
-set(M3AP_DIR ${OPENAIR3_DIR}/M3AP)
-if (${M3AP_RELEASE} STREQUAL "R8")
-  make_version(M3AP_VERSION 8 9 0)
-  set(M3AP_ASN_FILES m3ap-8.9.0.asn1)
-elseif (${M3AP_RELEASE} STREQUAL "R11")
-  make_version(M3AP_VERSION 11 9 0)
-  set(M3AP_ASN_FILES m3ap-11.9.0.asn1)
-elseif (${M3AP_RELEASE} STREQUAL "R12")
-  make_version(M3AP_VERSION 12 9 0)
-  set(M3AP_ASN_FILES m3ap-12.9.0.asn1)
-elseif (${M3AP_RELEASE} STREQUAL "R14")
-  make_version(M3AP_VERSION 14 0 0)
-  set(M3AP_ASN_FILES m3ap-14.0.0.asn1)
-elseif (${M3AP_RELEASE} STREQUAL "R15")
-  make_version(M3AP_VERSION 15 1 0)
-  set(M3AP_ASN_FILES m3ap-15.1.0.asn1)
-endif(${M3AP_RELEASE} STREQUAL "R8")
-add_definitions(-DM3AP_VERSION=${M3AP_VERSION})
-set(M3AP_ASN_DIR ${M3AP_DIR}/MESSAGES/ASN1/${M3AP_RELEASE})
-set(M3AP_C_DIR ${asn1_generated_dir}/M3AP_${M3AP_RELEASE})
-
-# Warning: if you modify ASN.1 source file to generate new C files, cmake should be re-run instead of make
-execute_process(COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M3AP_C_DIR}" "${M3AP_ASN_DIR}/${M3AP_ASN_FILES}"  "M3AP_" -fno-include-deps
-                RESULT_VARIABLE ret)
-if (NOT ${ret} STREQUAL 0)
-  message(FATAL_ERROR "${ret}: error")
-endif (NOT ${ret} STREQUAL 0)
-
-file(GLOB M3AP_source ${M3AP_C_DIR}/*.c)
-
-add_custom_target (
-  m3_flag ALL
-  COMMAND ${OPENAIR_CMAKE}/tools/make_asn1c_includes.sh "${M3AP_C_DIR}" "${M3AP_ASN_DIR}/${M3AP_ASN_FILES}"  "M3AP_" -fno-include-deps
-  DEPENDS ${M3AP_ASN_DIR}/${M3AP_ASN_FILES}
-  )
-
-add_library(M3AP_LIB
-  ${M3AP_source}
-  ${M3AP_DIR}/m3ap_common.c
-  )
-add_dependencies(M3AP_LIB rrc_flag m3_flag)
-
-include_directories ("${M3AP_C_DIR}")
-include_directories ("${M3AP_DIR}")
-
-add_library(M3AP_ENB
-  ${M3AP_DIR}/m3ap_decoder.c
-  ${M3AP_DIR}/m3ap_encoder.c
-  ${M3AP_DIR}/m3ap_MCE_handler.c
-  ${M3AP_DIR}/m3ap_MME_handler.c
-  ${M3AP_DIR}/m3ap_MME.c
-  ${M3AP_DIR}/m3ap_MME_management_procedures.c
-  ${M3AP_DIR}/m3ap_MME_interface_management.c
-  ${M3AP_DIR}/m3ap_MCE.c
-  ${M3AP_DIR}/m3ap_MCE_management_procedures.c
-  ${M3AP_DIR}/m3ap_MCE_interface_management.c
-  ${M3AP_DIR}/m3ap_itti_messaging.c
-  ${M3AP_DIR}/m3ap_ids.c
-  ${M3AP_DIR}/m3ap_timers.c
-  )
-add_dependencies(M3AP_ENB rrc_flag m3_flag)
 
 #X2AP
 # Same limitation as described in RRC/S1AP: unknown generated file list
@@ -657,7 +585,7 @@ add_library(F1AP
 add_list1_option(NB_ANTENNAS_RX "2" "Number of antennas in reception" "1" "2" "4")
 add_list1_option(NB_ANTENNAS_TX "4" "Number of antennas in transmission" "1" "2" "4")
 
-add_list2_option(RF_BOARD "RF head type" "None" "OAI_USRP" "OAI_BLADERF" "CPRIGW" "OAI_LMSSDR" "OAI_SIMU")
+add_list2_option(RF_BOARD "EXMIMO" "RF head type" "None" "EXMIMO" "OAI_USRP" "OAI_BLADERF" "CPRIGW" "OAI_LMSSDR" "OAI_SIMU")
 
 
 add_list2_option(TRANSP_PRO "None" "Transport protocol type" "None" "ETHERNET")
@@ -682,6 +610,15 @@ set (SHLIB_LOADER_SOURCES
 # include RF devices / transport protocols library modules
 ######################################################################
 
+include_directories("${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/")
+include_directories ("${OPENAIR_TARGETS}/ARCH/EXMIMO/DEFS/")
+#set (option_HWEXMIMOLIB_lib "-l ")
+set(HWLIB_EXMIMO_SOURCE
+  ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
+#  ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/gain_control.c
+  )
+add_library(oai_exmimodevif MODULE ${HWLIB_EXMIMO_SOURCE} )
+
 include_directories("${OPENAIR_TARGETS}/ARCH/USRP/USERSPACE/LIB/")
 set(HWLIB_USRP_SOURCE
   ${OPENAIR_TARGETS}/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
@@ -722,6 +659,20 @@ add_library(oai_irisdevif MODULE ${HWLIB_IRIS_SOURCE})
 target_include_directories(oai_irisdevif PRIVATE /usr/local/lib/SoapySDR/modules0.7/)
 target_link_libraries(oai_irisdevif SoapySDR)
 
+include_directories("${OPENAIR_TARGETS}/ARCH/mobipass/")
+set(TPLIB_MOBIPASS_SOURCE
+  ${OPENAIR_TARGETS}/ARCH/mobipass/interface.c
+  ${OPENAIR_TARGETS}/ARCH/mobipass/mobipass.c
+  ${OPENAIR_TARGETS}/ARCH/mobipass/queues.c
+  )
+add_library(oai_mobipass MODULE ${TPLIB_MOBIPASS_SOURCE} )
+
+# Hide all functions/variables in the mobipass library.
+# Use __attribute__((__visibility__("default")))
+# in the source code to unhide a function/variable.
+get_target_property(mobipas_cflags oai_mobipass COMPILE_FLAGS)
+set_target_properties(oai_mobipass PROPERTIES COMPILE_FLAGS "${mobipass_cflags} -fvisibility=hidden")
+
 # TCP bridge libraries
 ######################################################################
 
@@ -743,6 +694,8 @@ set(HWLIB_TCP_BRIDGE_OAI_SOURCE
 add_library(tcp_bridge_oai MODULE ${HWLIB_TCP_BRIDGE_OAI_SOURCE} )
 set_target_properties(tcp_bridge_oai PROPERTIES COMPILE_FLAGS "-fvisibility=hidden")
 
+add_library(rfsimulator MODULE ${OPENAIR_TARGETS}/ARCH/rfsimulator/simulator.c)
+
 ##########################################################
 
 include_directories ("${OPENAIR_TARGETS}/ARCH/COMMON")
@@ -902,7 +855,6 @@ include_directories("${OPENAIR1_DIR}")
 include_directories("${OPENAIR2_DIR}")
 include_directories("${OPENAIR3_DIR}/NAS/TOOLS")
 include_directories("${OPENAIR2_DIR}/ENB_APP")
-include_directories("${OPENAIR2_DIR}/MCE_APP")
 include_directories("${OPENAIR2_DIR}/LAYER2/RLC")
 include_directories("${OPENAIR2_DIR}/LAYER2/RLC/AM_v9.3.0")
 include_directories("${OPENAIR2_DIR}/LAYER2/RLC/UM_v9.3.0")
@@ -929,10 +881,10 @@ include_directories("${OPENAIR2_DIR}/M2AP")
 include_directories("${OPENAIR2_DIR}/F1AP")
 include_directories("${OPENAIR3_DIR}/UDP")
 include_directories("${OPENAIR3_DIR}/GTPV1-U")
-include_directories("${OPENAIR3_DIR}/M3AP")
-include_directories("${OPENAIR3_DIR}/MME_APP")
 include_directories("${OPENAIR_DIR}/targets/COMMON")
 include_directories("${OPENAIR_DIR}/targets/ARCH/COMMON")
+include_directories("${OPENAIR_DIR}/targets/ARCH/EXMIMO/USERSPACE/LIB/")
+include_directories("${OPENAIR_DIR}/targets/ARCH/EXMIMO/DEFS")
 include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PHY")
 include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC")
 include_directories("${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/RRC")
@@ -1028,7 +980,6 @@ add_library(FLEXRAN_AGENT
   ${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PHY/flexran_agent_phy.c
   ${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/MAC/flexran_agent_mac.c
   ${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/RRC/flexran_agent_rrc.c
-  ${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/RRC/flexran_agent_rrc_internal.c
   ${OPENAIR2_DIR}/ENB_APP/CONTROL_MODULES/PDCP/flexran_agent_pdcp.c
   ${OPENAIR2_DIR}/ENB_APP/flexran_agent.c
   ${OPENAIR2_DIR}/ENB_APP/flexran_agent_task_manager.c
@@ -1353,13 +1304,13 @@ set(PHY_SRC
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch.c
-#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_decoding.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/rar_tools.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/uci_tools.c
-#  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
-#  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
-#  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_eNB_measurements.c
   ${OPENAIR1_DIR}/PHY/INIT/lte_init.c
   )
@@ -1367,11 +1318,6 @@ set(PHY_SRC
 set(PHY_SRC_RU
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if4_tools.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if5_tools.c
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/drs_modulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_ul.c
   ${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz.c
   ${OPENAIR1_DIR}/PHY/MODULATION/gen_75KHz.cpp
@@ -1514,7 +1460,6 @@ set(L2_SRC
 #  ${RRC_DIR}/rrc_UE.c
   ${RRC_DIR}/rrc_eNB.c
   ${RRC_DIR}/rrc_eNB_S1AP.c
-  ${RRC_DIR}/rrc_eNB_M2AP.c
   ${RRC_DIR}/rrc_eNB_UE_context.c
   ${RRC_DIR}/rrc_common.c
   ${RRC_DIR}/L2_interface.c
@@ -1605,20 +1550,12 @@ set (ENB_APP_SRC
   ${OPENAIR2_DIR}/ENB_APP/RRC_config_tools.c
   )
 
-
-set (MCE_APP_SRC
-  ${OPENAIR2_DIR}/MCE_APP/mce_app.c
-  ${OPENAIR2_DIR}/MCE_APP/mce_config.c
-  )
-
-
 add_library(L2
   ${L2_SRC}
   ${MAC_SRC}
-  ${ENB_APP_SRC}
-  ${MCE_APP_SRC})
+  ${ENB_APP_SRC})
 #  ${OPENAIR2_DIR}/RRC/L2_INTERFACE/openair_rrc_L2_interface.c)
-add_dependencies(L2 rrc_flag s1ap_flag x2_flag m2_flag m3_flag)
+add_dependencies(L2 rrc_flag s1ap_flag x2_flag)
 
 add_library(L2_UE
   ${L2_SRC_UE}
@@ -1652,13 +1589,6 @@ set (GTPV1U_SRC
 add_library(GTPV1U ${GTPV1U_SRC})
 add_dependencies(GTPV1U rrc_flag)
 
-set (MME_APP_SRC
-  ${OPENAIR3_DIR}/MME_APP/mme_app.c
-  ${OPENAIR3_DIR}/MME_APP/mme_config.c
-)
-add_library(MME_APP ${MME_APP_SRC})
-add_dependencies(MME_APP rrc_flag s1ap_flag x2_flag m2_flag m3_flag)
-
 set(SCTP_SRC
   ${OPENAIR3_DIR}/SCTP/sctp_common.c
   ${OPENAIR3_DIR}/SCTP/sctp_eNB_task.c
@@ -1981,7 +1911,7 @@ add_library(LFDS7
 
 # Simulation library
 ##########################
-set (SIMUSRC 
+add_library(SIMU
 ${OPENAIR1_DIR}/SIMULATION/TOOLS/random_channel.c
 ${OPENAIR1_DIR}/SIMULATION/TOOLS/rangen_double.c
 ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
@@ -1992,13 +1922,9 @@ ${OPENAIR1_DIR}/SIMULATION/TOOLS/channel_sim.c
 ${OPENAIR1_DIR}/SIMULATION/RF/rf.c
 ${OPENAIR1_DIR}/SIMULATION/RF/dac.c
 ${OPENAIR1_DIR}/SIMULATION/RF/adc.c
-${OPENAIR_DIR}/targets/ARCH/rfsimulator/apply_channelmod.c
-#${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
+${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
 )
 
-# Simulation library
-##########################
-add_library( SIMU SHARED ${SIMUSRC} )
 
 add_library(SIMU_ETH
 ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
@@ -2008,6 +1934,10 @@ ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/bypass_session_layer.c
 #${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/emu_transport.c
 )
 
+add_library(OPENAIR0_LIB
+  ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
+)
+
 include_directories("${NFAPI_DIR}/nfapi/public_inc")
 include_directories("${NFAPI_DIR}/common/public_inc")
 include_directories("${NFAPI_DIR}/pnf/public_inc")
@@ -2148,11 +2078,6 @@ add_library(uescope MODULE ${XFORMS_SOURCE} ${XFORMS_SOURCE_SOFTMODEM} ${XFORMS_
 target_link_libraries(enbscope ${XFORMS_LIBRARIES})
 target_link_libraries(uescope ${XFORMS_LIBRARIES})
 
-add_library(rfsimulator MODULE 
-	${OPENAIR_TARGETS}/ARCH/rfsimulator/simulator.c
-	)
-target_link_libraries(rfsimulator SIMU ${ATLAS_LIBRARIES})
-
 set(CMAKE_MODULE_PATH "${OPENAIR_DIR}/cmake_targets/tools/MODULES" "${CMAKE_MODULE_PATH}")
 
 #include T directory even if the T is off because T macros are in the code
@@ -2196,25 +2121,6 @@ add_definitions(-DASN1_MINIMUM_VERSION=924)
 #################################
 # add executables for operation
 #################################
-add_library(minimal_lib
-  ${OPENAIR_DIR}/common/utils/backtrace.c
-  ${OPENAIR_DIR}/common/utils/LOG/log.c
-  ${OPENAIR_DIR}/common/config/config_userapi.c
-  ${OPENAIR_DIR}/common/config/config_load_configmodule.c
-  ${OPENAIR_DIR}/common/config/config_cmdline.c
-  ${OPENAIR_DIR}/common/utils/minimal_stub.c
-  ${T_SOURCE}
-  )
-target_link_libraries(minimal_lib pthread dl ${T_LIB})
-
-add_executable(replay_node
-  ${OPENAIR_TARGETS}/ARCH/rfsimulator/stored_node.c
-  )
-target_link_libraries (replay_node minimal_lib)
-
-add_executable(measurement_display
-  ${OPENAIR_DIR}/common/utils/threadPool/measurement_display.c)
-target_link_libraries (measurement_display minimal_lib)
 
 # lte-softmodem is both eNB and UE implementation
 ###################################################
@@ -2223,13 +2129,11 @@ add_executable(lte-softmodem
   ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
   ${OPENAIR_TARGETS}/RT/USER/lte-enb.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
-  ${OPENAIR_TARGETS}/RT/USER/ru_control.c
   ${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
   ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
   ${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
   ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
   ${OPENAIR_TARGETS}/COMMON/create_tasks.c
-  ${OPENAIR_TARGETS}/COMMON/create_tasks_mbms.c
   ${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
   ${OPENAIR2_DIR}/RRC/NAS/nas_config.c
   ${OPENAIR2_DIR}/RRC/NAS/rb_config.c
@@ -2249,7 +2153,7 @@ add_dependencies(lte-softmodem rrc_flag s1ap_flag x2_flag)
 
 target_link_libraries (lte-softmodem
   -Wl,--start-group
-  RRC_LIB S1AP_LIB S1AP_ENB F1AP_LIB F1AP M2AP_LIB M2AP_ENB X2AP_LIB X2AP_ENB M3AP_LIB M3AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT MME_APP UDP SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU LFDS L2
+  RRC_LIB S1AP_LIB S1AP_ENB F1AP_LIB F1AP X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB  GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU LFDS L2
   ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} ${FLEXRAN_AGENT_LIB} ${FSPT_MSG_LIB} ${PROTO_AGENT_LIB} LFDS7
   NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
   -Wl,--end-group z dl)
@@ -2296,8 +2200,8 @@ add_executable(lte-uesoftmodem
   ${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
   ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
   ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
-  ${OPENAIR_TARGETS}/RT/USER/ru_control.c
   ${OPENAIR_TARGETS}/RT/USER/rfsim.c
+  ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
   ${OPENAIR_TARGETS}/COMMON/create_tasks_ue.c
   ${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
   ${OPENAIR2_DIR}/RRC/NAS/nas_config.c
@@ -2317,7 +2221,7 @@ add_executable(lte-uesoftmodem
 add_dependencies(lte-uesoftmodem rrc_flag s1ap_flag x2_flag)
 target_link_libraries (lte-uesoftmodem
   -Wl,--start-group
-  RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB  M3AP_LIB M3AP_ENB F1AP F1AP_LIB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT MME_APP UDP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU
+  RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB  F1AP F1AP_LIB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU
   ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} LFDS7 ${ATLAS_LIBRARIES}
   NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
   -Wl,--end-group z dl)
@@ -2396,7 +2300,7 @@ add_executable(test_epc_generate_scenario
   ${OPENAIR3_DIR}/S1AP/s1ap_eNB_defs.h
   )
 target_link_libraries (test_epc_generate_scenario
-  -Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB M3AP_LIB M3AP_ENB F1AP_LIB F1AP GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT MME_APP UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
+  -Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB  F1AP_LIB F1AP GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
   )
 
 add_executable(test_epc_play_scenario
@@ -2415,7 +2319,7 @@ add_executable(test_epc_play_scenario
   )
 target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
 target_link_libraries (test_epc_play_scenario
-  -Wl,--start-group RRC_LIB S1AP_LIB X2AP_LIB X2AP_ENB M3AP_LIB M3AP_ENB F1AP_LIB F1AP GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT MME_APP UDP SCHED_LIB PHY_COMMON PHY PHY_UE LFDS ${ITTI_LIB} ${MSC_LIB} -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
+  -Wl,--start-group RRC_LIB S1AP_LIB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB  F1AP_LIB F1AP GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY_COMMON PHY PHY_UE LFDS ${ITTI_LIB} ${MSC_LIB} -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
   )
 
 
@@ -2451,12 +2355,12 @@ if (${T_TRACER})
         dlsim_tm4 dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim
         pdcchsim pucchsim prachsim syncsim ulsim cu_test du_test
         #all "add_library" definitions
-        ITTI RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB M3AP_LIB M3AP_ENB F1AP_LIB F1AP 
+        ITTI RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB M2AP_LIB M2AP_ENB  F1AP_LIB F1AP
         oai_exmimodevif oai_usrpdevif oai_bladerfdevif oai_lmssdrdevif
         oai_eth_transpro
         FLPT_MSG ASYNC_IF FLEXRAN_AGENT HASHTABLE MSC UTIL OMG_SUMO SECU_OSA
         SECU_CN SCHED_LIB SCHED_RU_LIB SCHED_UE_LIB PHY L2 default_sched
-        remote_sched RAL CN_UTILS GTPV1U SCTP_CLIENT MME_APP UDP LIB_NAS_UE LFDS
+        remote_sched RAL CN_UTILS GTPV1U SCTP_CLIENT UDP LIB_NAS_UE LFDS
         LFDS7 SIMU OPENAIR0_LIB PHY_MEX coding)
     if (TARGET ${i})
       add_dependencies(${i} generate_T)
@@ -2538,6 +2442,14 @@ if(OAI_NW_DRIVER_USE_NETLINK)
 endif()
 make_driver(oai_nw_drv ${OPENAIR2_DIR}/NETWORK_DRIVER/LTE ${oai_nw_drv_src})
 
+# Exmimo board drivers
+#########################
+list(APPEND openair_rf_src module_main.c irq.c fileops.c exmimo_fw.c)
+make_driver(openair_rf ${OPENAIR_TARGETS}/ARCH/EXMIMO/DRIVER/eurecom ${openair_rf_src})
+
+add_executable(updatefw
+  ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw.c
+)
 
 # ue_ip: purpose ???
 ###############
@@ -2548,6 +2460,22 @@ endif()
 make_driver(ue_ip ${OPENAIR2_DIR}/NETWORK_DRIVER/UE_IP ${ue_ip_src})
 
 
+# OCTAVE tools
+###############
+set(OCT_INCL -I${OPENAIR_TARGETS}/ARCH/EXMIMO/DEFS -I${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/LIB -I${OPENAIR_TARGETS}/ARCH/COMMON)
+set(OCT_LIBS -L${CMAKE_CURRENT_BINARY_DIR} -lm -lOPENAIR0_LIB)
+set(OCT_FLAGS -DEXMIMO)
+set(OCT_DIR ${OPENAIR_TARGETS}/ARCH/EXMIMO/USERSPACE/OCTAVE)
+set(OCT_FILES
+  oarf_config_exmimo.oct
+  oarf_config_exmimo.oct
+  oarf_get_frame.oct
+  oarf_stop.oct
+  oarf_send_frame.oct
+  oarf_get_num_detected_cards.oct
+  oarf_stop_without_reset.oct
+)
+
 foreach(file IN ITEMS ${OCT_FILES})
   string(REGEX REPLACE "oct *$" "cc" src ${file})
   add_custom_command(

cmake_targets/build_oai

@@ -150,7 +150,7 @@ Options
 --build-eclipse
    Build eclipse project files. Paths are auto corrected by fixprj.sh
 --build-lib <libraries>
-   Build optional shared library, <libraries> can be one or several of $OPTIONAL_LIBRARIES or \"all\"
+   Build optional shared library, <libraries> can be one or several of $OPTIONAL_LIBRARIES
 --usrp-recplay
    Build for I/Q record-playback modes
 
@@ -223,6 +223,9 @@ function main() {
        -w | --hardware)
             # Use OAI_USRP  as the key word USRP is used inside UHD driver           
                 case "$2" in
+                    "EXMIMO")
+                        HW="EXMIMO"
+                        ;;
                     "USRP" | "BLADERF" | "LMSSDR" | "IRIS" | "SIMU")
                         HW="OAI_"$2
                         ;;
@@ -324,21 +327,16 @@ function main() {
             shift 1;;
        --build-lib) 
             BUILD_OPTLIB="" 
-            if [  "$2" == "all" ] ; then
-              BUILD_OPTLIB="$OPTIONAL_LIBRARIES"
-              echo_info "Enabling build of all optional shared libraries ($OPTIONAL_LIBRARIES)" 
-            else
-              for alib in $2 ; do 
+            for alib in $2 ; do 
                 for oklib in $OPTIONAL_LIBRARIES ; do
-                  if [ "$alib" = "$oklib" ] ; then
-                    BUILD_OPTLIB="$BUILD_OPTLIB $alib" 
-                    echo_info "Enabling build of lib${alib}.so" 
-                    fi   
-                  done
+                     if [ "$alib" = "$oklib" ] ; then
+                        BUILD_OPTLIB="$BUILD_OPTLIB $alib" 
+                        echo_info "Enabling build of lib${alib}.so" 
+                     fi   
                 done
-	          if [ "${BUILD_OPTLIB## }" != "$2" ] ; then
-                 echo_fatal "Unknown optional library in $2, valid libraries are $OPTIONAL_LIBRARIES" 
-              fi
+            done
+	    if [ "${BUILD_OPTLIB## }" != "$2" ] ; then
+               echo_fatal "Unknown optional library in $2, valid libraries are $OPTIONAL_LIBRARIES" 
             fi
             shift 2;;		
         --usrp-recplay)
@@ -390,7 +388,14 @@ function main() {
   echo_info "RF HW set to $HW" 
     # If the user doesn't specify the Linux scheduler to use, we set a value
     if [ "$DEADLINE_SCHEDULER_FLAG_USER" = "" ]; then
+      case "$HW" in
+ 	  "EXMIMO")
+        DEADLINE_SCHEDULER_FLAG_USER="True"
+              ;;
+ 	  *)
         DEADLINE_SCHEDULER_FLAG_USER="False"
+              ;;
+      esac
   fi
   #Disable CPU Affinity for deadline scheduler
   if [ "$DEADLINE_SCHEDULER_FLAG_USER" = "True" ] ; then 
@@ -484,7 +489,7 @@ function main() {
   config_libconfig_shlib=params_libconfig
   
   # first generate the CMakefile in the right directory
-  if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
+  if [ "$eNB" = "1" -o "$UE" = "1" -o "$HW" = "EXMIMO" ] ; then
 
     # LTE softmodem compilation
     [ "$CLEAN" = "1" ] && rm -rf $DIR/$lte_build_dir/build
@@ -520,7 +525,21 @@ function main() {
 	  $lte_build_dir $lte_exec \
 	  $lte_exec $dbin/$lte_exec.$REL
 
-	  
+# mandatory shared lib
+    compilations \
+	  $lte_build_dir $config_libconfig_shlib \
+	  lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
+    compilations \
+          $lte_build_dir coding \
+          libcoding.so $dbin/libcoding.so
+# optional libs (used when noS1 with kernel modules 
+    compilations \
+          $lte_build_dir nasmesh \
+          CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
+    compilations \
+          $lte_build_dir rb_tool \
+          rb_tool $dbin/rb_tool
+          cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin	  
   fi
 
   if [ "$UE" = 1  ] ; then
@@ -529,6 +548,21 @@ function main() {
         $lte_build_dir $lte_exec \
         $lte_exec $dbin/$lte_exec.$REL
         
+    # mandatory shared lib
+    compilations \
+        $lte_build_dir $config_libconfig_shlib \
+        lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
+    compilations \
+        $lte_build_dir coding \
+        libcoding.so $dbin/libcoding.so
+# optional libs (used when noS1 with kernel modules
+    compilations \
+          $lte_build_dir nasmesh \
+          CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
+    compilations \
+          $lte_build_dir rb_tool \
+          rb_tool $dbin/rb_tool
+          cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
     # ue_ip driver compilation
     compilations \
           $lte_build_dir ue_ip \
@@ -641,32 +675,25 @@ function main() {
 
   fi 
  
-  # build RF device, transport protocol libraries and all
-  # shared libraries common to UE and eNB
+  # build RF device and transport protocol libraries
   #####################################
   if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
-# mandatory shared lib
-    compilations \
-	  $lte_build_dir $config_libconfig_shlib \
-	  lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
-    compilations \
-          $lte_build_dir coding \
-          libcoding.so $dbin/libcoding.so
-# optional libs (used when noS1 with kernel modules 
-    compilations \
-          $lte_build_dir nasmesh \
-          CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
-    compilations \
-          $lte_build_dir rb_tool \
-          rb_tool $dbin/rb_tool
-          cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
+
       # build RF device libraries
       if [ "$HW" != "None" ] ; then
 	  rm -f liboai_device.so
 	  rm -f $dbin/liboai_device.so
 
 	  # link liboai_device.so with the selected RF device library
-	  if [ "$HW" == "OAI_USRP" ] ; then
+	  if [ "$HW" == "EXMIMO" ] ; then
+	      compilations \
+                    $lte_build_dir oai_exmimodevif \
+		  liboai_exmimodevif.so $dbin/liboai_exmimodevif.so.$REL
+
+	      ln -sf liboai_exmimodevif.so liboai_device.so
+	      ln -sf $dbin/liboai_exmimodevif.so.$REL $dbin/liboai_device.so
+	      echo_info "liboai_device.so is linked to EXMIMO device library"       
+	  elif [ "$HW" == "OAI_USRP" ] ; then
               compilations \
                     $lte_build_dir oai_usrpdevif \
                   liboai_usrpdevif.so $dbin/liboai_usrpdevif.so.$REL
@@ -728,7 +755,7 @@ function main() {
         echo_info "liboai_transpro.so is linked to ETHERNET transport"
       fi
 
-    if [ "$HW" == "OAI_SIMU" ] ; then
+    if [ "$RFSIMULATOR" == "true" -o "$HW" == "OAI_SIMU" ] ; then
         echo_info "Compiling rfsimulator"
         compilations \
             $lte_build_dir rfsimulator \

cmake_targets/build_ue

@@ -0,0 +1,6 @@
+#!/bin/bash
+#sudo ./build_oai -c -C -I --install-optional-packages --install-system-files --UE -w USRP -V 
+#sudo ./build_oai -c -C -I --install-optional-packages --UE -w USRP -V 
+#sudo ./build_oai -c -C --UE -w USRP -V
+sudo ./build_oai -c -C --UE -w USRP
+#sudo ./build_oai -c -C --UE -w USRP --build-eclipse

cmake_targets/lte_noS1_build_oai/CMakeLists.template

@@ -0,0 +1,9 @@
+set(ENABLE_ITTI True)
+set(ENABLE_USE_MME False)
+set(PDCP_USE_NETLINK True)
+set(LINK_ENB_PDCP_TO_IP_DRIVER True)
+set(LINK_ENB_PDCP_TO_GTPV1U False)
+set(PDCP_USE_NETLINK_QUEUES False)
+set(LINUX True)
+set(SECU False)
+set(NAS_UE False)

cmake_targets/oaisim_build_oai/CMakeLists.template

@@ -0,0 +1,59 @@
+cmake_minimum_required(VERSION 2.8)
+
+set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
+set (  DEBUG_OMG False )
+set (  DISABLE_XER_PRINT False )
+set (  DRIVER2013 True )
+set (  ENABLE_ITTI True )
+set (  ENABLE_NAS_UE_LOGGING True )
+set (  ENABLE_NEW_MULTICAST True )
+set (  ENABLE_RAL False )
+set (  ENABLE_STANDALONE_EPC False)
+set (  ENABLE_USE_CPU_EXECUTION_TIME True )
+set (  ENABLE_USE_MME True )
+set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
+set (  ENABLE_VCD_FIFO False )
+set (  ENB_MODE True )
+set (  EXMIMO_IOT True )
+set (  JUMBO_FRAME True )
+set (  LARGE_SCALE False )
+set (  LINK_ENB_PDCP_TO_GTPV1U True)
+set (  LINUX_LIST False )
+set (  LINUX True )
+set (  LOCALIZATION False )
+set (  LOG_NO_THREAD True )
+set (  DEADLINE_SCHEDULER False )
+set (  MAC_CONTEXT 1 )
+set (  MAX_NUM_CCs 1 )
+set (  MESSAGE_CHART_GENERATOR False)
+set (  MSG_PRINT False )
+set (  MU_RECEIVER False )
+set (  NAS_ADDRESS_FIX False )
+set (  NAS_BUILT_IN_UE True)
+set (  NAS_MME False )
+set (  NAS_UE True )
+set (  NB_ANTENNAS_RX "2" )
+set (  NB_ANTENNAS_TX "2" )
+set (  NO_RRM True )
+set (  OAISIM True )
+set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
+set (  OAI_NW_DRIVER_USE_NETLINK True )
+set (  OPENAIR2 True )
+set (  OPENAIR_LTE True )
+set (  PACKAGE_NAME "oaisim" )
+set (  PDCP_USE_NETLINK True )
+set (  PDCP_MSG_PRINT False )
+set (  PHY_CONTEXT False )
+set (  PHY_EMUL False )
+set (  PHYSIM True )
+set (  RF_BOARD "False" )
+set (  RLC_STOP_ON_LOST_PDU False )
+set (  RRC_ASN1_VERSION "Rel10" )
+set (  RRC_DEFAULT_RAB_IS_AM True)
+set (  RRC_MSG_PRINT False )
+set (  SECU False )
+set (  SMBV False )
+set (  TEST_OMG False )
+set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
+set (  USE_MME "R10" )
+set (  XER_PRINT False )

cmake_targets/oaisim_mme_build_oai/CMakeLists.template

@@ -0,0 +1,61 @@
+cmake_minimum_required(VERSION 2.8)
+
+set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
+set (  DEBUG_OMG False )
+set (  DISABLE_XER_PRINT False )
+set (  DRIVER2013 False )
+set (  ENABLE_ITTI True )
+set (  ENABLE_NAS_UE_LOGGING False )
+set (  ENABLE_NEW_MULTICAST False )
+set (  ENABLE_RAL False )
+set (  ENABLE_STANDALONE_EPC False )
+set (  ENABLE_USE_CPU_EXECUTION_TIME False )
+set (  ENABLE_USE_MME False )
+set (  ENABLE_USE_RAW_SOCKET_FOR_SGI True)
+set (  ENABLE_VCD_FIFO False )
+set (  ENB_MODE False )
+set (  EPC_BUILD True )
+set (  EXMIMO_IOT False )
+set (  JUMBO_FRAME False )
+set (  LARGE_SCALE False )
+set (  LINK_ENB_PDCP_TO_GTPV1U True)
+set (  LINUX_LIST False )
+set (  LINUX False )
+set (  LOCALIZATION False )
+set (  LOG_NO_THREAD False )
+set (  DEADLINE_SCHEDULER False )
+set (  MAC_CONTEXT 1 )
+set (  MAX_NUM_CCs 1 )
+set (  MSG_PRINT False )
+set (  MU_RECEIVER False )
+set (  NAS_ADDRESS_FIX False )
+set (  NAS_BUILT_IN_EPC True )
+set (  NAS_MME True )
+set (  NAS_NETLINK False )
+set (  NAS_UE False )
+set (  NB_ANTENNAS_RX "2" )
+set (  NB_ANTENNAS_TX "2" )
+set (  NO_RRM False )
+set (  OAISIM False )
+set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
+set (  OAI_NW_DRIVER_USE_NETLINK False )
+set (  OPENAIR2 False )
+set (  OPENAIR_LTE False )
+set (  PACKAGE_NAME "EPC" )
+set (  PDCP_MSG_PRINT False )
+set (  PHY_CONTEXT False )
+set (  PHY_EMUL False )
+set (  PHYSIM False )
+set (  RF_BOARD "False" )
+set (  RRC_ASN1_VERSION "Rel10" )
+set (  RLC_STOP_ON_LOST_PDU False )
+set (  RRC_MSG_PRINT False )
+set (  SECU False )
+set (  SMBV False )
+set (  TEST_OMG False )
+set (  UPDATE_RELEASE_9 True)
+set (  UPDATE_RELEASE_10 True)
+set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
+set (  USE_MME "R10" )
+set (  XER_PRINT False )
+set (  XFORMS False )

cmake_targets/oaisim_noS1_build_oai/CMakeLists.template

@@ -0,0 +1,62 @@
+cmake_minimum_required(VERSION 2.8)
+
+set (  DEBUG_OMG False )
+set (  DISABLE_XER_PRINT False )
+set (  DRIVER2013 True )
+set (  ENABLE_ITTI True )
+set (  ENABLE_NAS_UE_LOGGING False )
+set (  ENABLE_NEW_MULTICAST True )
+set (  ENABLE_RAL False )
+set (  ENABLE_STANDALONE_EPC False)
+set (  ENABLE_USE_CPU_EXECUTION_TIME True )
+set (  ENABLE_USE_MME False )
+set (  ENABLE_USE_RAW_SOCKET_FOR_SGI False)
+set (  ENABLE_VCD_FIFO False )
+set (  ENB_MODE True )
+set (  EXMIMO_IOT True )
+set (  JUMBO_FRAME True )
+set (  LARGE_SCALE False )
+set (  LINK_ENB_PDCP_TO_GTPV1U False)
+set (  LINUX_LIST False )
+set (  LINUX True )
+set (  LOCALIZATION False )
+set (  LOG_NO_THREAD 1 )
+set (  DEADLINE_SCHEDULER False )
+set (  MAC_CONTEXT 1 )
+set (  MAX_NUM_CCs 1 )
+set (  MESSAGE_CHART_GENERATOR         False )
+set (  MESSAGE_CHART_GENERATOR_RLC_MAC False )
+set (  MESSAGE_CHART_GENERATOR_PHY     False )
+set (  MSG_PRINT False )
+set (  MU_RECEIVER False )
+set (  NAS_ADDRESS_FIX False )
+set (  NAS_BUILT_IN_UE False)
+set (  NAS_MME False )
+set (  NAS_UE False )
+set (  NB_ANTENNAS_RX "2" )
+set (  NB_ANTENNAS_TX "2" )
+set (  NO_RRM True )
+set (  OAISIM True )
+set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
+set (  OAI_NW_DRIVER_USE_NETLINK True )
+set (  OPENAIR2 True )
+set (  OPENAIR_LTE True )
+set (  PACKAGE_NAME "oaisim" )
+set (  PDCP_USE_NETLINK True )
+set (  PDCP_MSG_PRINT False )
+set (  PHY_CONTEXT False )
+set (  PHY_EMUL False )
+set (  PHYSIM True )
+set (  RF_BOARD "False" )
+set (  RRC_ASN1_VERSION "Rel10" )
+set (  RLC_STOP_ON_LOST_PDU False )
+set (  RRC_MSG_PRINT False )
+set (  SECU False )
+set (  SMBV False )
+set (  TEST_OMG False )
+set (  USE_3GPP_ADDR_AS_LINK_ADDR False )
+set (  USE_MME "R10" )
+set (  XER_PRINT False )
+set (  DEBUG_PHY False )
+set (  DEBUG_PHY_PROC False)
+set (  DEBUG_DLSCH False)

cmake_targets/tools/build_helper

@@ -40,15 +40,7 @@ esac
 KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
 KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)
 
-#check if we run inside a container
-IS_CONTAINER=`egrep -c "docker|podman|kubepods" /proc/self/cgroup || true`
-#sudo is not needed when we are root
-if [ "$UID" = 0 ]
-then
-  SUDO=''
-else
-  SUDO='sudo -S -E'
-fi
+SUDO='sudo -E'
 
 ###############################
 ## echo and  family
@@ -111,7 +103,6 @@ check_supported_distribution() {
         "fedora24")    return 0 ;;
         "rhel7")       return 0 ;;
 	"rhel7.6")     return 0 ;;
-	"rhel7.7")     return 0 ;;
         "centos7")     return 0 ;;
     esac
     return 1
@@ -224,22 +215,10 @@ install_protobuf_from_source(){
     #wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
     #tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
     #cd protobuf-2.6.1/
-
-    if [ $IS_CONTAINER -eq 0 ]
-    then
-      rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
-      wget --tries=3 --retry-connrefused https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
-      tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
-      cd protobuf-3.3.0/
-    else
-      export LD_LIBRARY_PATH=/usr/local/lib #protoc needs to know where toclook for shared libs
-      rm -rf /tmp/protobuf
-      git clone --depth=1 --branch=v3.3.0 https://github.com/protocolbuffers/protobuf.git /tmp/protobuf
-      cd /tmp/protobuf
-      git submodule update --init --recursive
-      ./autogen.sh
-    fi
-
+    rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
+    wget https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
+    tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $USER --group $(groups | cut -d" " -f1) --no-same-owner
+    cd protobuf-3.3.0/
     ./configure
     echo "Compiling protobuf"
     make -j`nproc`
@@ -340,13 +319,13 @@ install_usrp_uhd_driver() {
     # quick workaround for RHE7.6
     local distribution=$(get_distribution_release)
     if [ -z $1 ]; then
-      if [[ "$OS_DISTRO" == "rhel" ]]; then
+      if [[ "$distribution" == "rhel7.6" ]]; then
           $SUDO /usr/local/bin/uhd_images_downloader
       else
           $SUDO uhd_images_downloader
       fi
     else
-      if [[ "$OS_DISTRO" == "rhel" ]]; then
+      if [[ "$distribution" == "rhel7.6" ]]; then
           $SUDO /usr/local/bin/uhd_images_downloader -i $1
       else
           $SUDO uhd_images_downloader -i $1

common/config/DOC/config/devusage/api.md

@@ -1,5 +1,3 @@
-## config module management
-
 ```c
 configmodule_interface_t *load_configmodule(int argc, char **argv, uint32_t initflags)
 ```
@@ -16,17 +14,23 @@ void End_configmodule(void)
 * Free memory which has been allocated by the configuration module since its initialization.
 * Possibly calls the `config_<config source>_end` function
 
-## Retrieving parameter's values
-
 ```c
 int config_get(paramdef_t *params,int numparams, char *prefix)
 ```
 * Reads as many parameters as described in params, they must all be in the same configuration file section
 * Calls the `config_<config source>_get` function
 * Calls the `config_process_cmdline` function
-* `params` points to an array of `paramdef_t` structures which describes the parameters to be read, possibly including a pointer to a checking function.The `paramflags` bit mask can be used to modify how a specific parameter is processed and the same mask is also used by the configuration module to return information about how the parameter has been processed. Bits definitions are described in the [`paramdef_t` structure description](./struct.md)
-
+* `params` points to an array of `paramdef_t` structures which describes the parameters to be read, possibly including a pointer to a checking function. The following bits can possibly be set in the `paramflags` mask before calling
+ - `PARAMFLAG_MANDATORY`: -1 is returned if the parameter is not explicitly defined in the config source.
+ - `PARAMFLAG_DISABLECMDLINE`: parameter cannot be modified via the command line
+ - `PARAMFLAG_DONOTREAD`: ignore the parameter, can be used at run-time, to alter a pre-defined `paramdef_t` array which is used in several `config_get` or/and `config_getlist` calls.
+ - `PARAMFLAG_NOFREE`: do not free the memory possibly allocated by the config module to store the value of the parameter. Default behavior is for the config module to free the memory it has allocated when the `config_end` function is called.
+ - `PARAMFLAG_BOOL`: Only relevant for integer types. tell the config module that when processing the command line, the corresponding option can be specified without any arggument and that in this case it must set the value to 1.
 
+* `params` is also used as an output parameter, `< XXX >ptr >` field  is used by the config module to store the value it has read. The following bits can possibly be set in the `paramflags` mask after the call:
+  - `PARAMFLAG_MALLOCINCONFIG`: memory has been allocated for the ` < XXX >ptr > ` field
+  - `PARAMFLAG_PARAMSET`: parameter has been found in the config source, it is not set to default value.
+  - `PARAMFLAG_PARAMSET`: parameter has been set to its default value
 * `numparams` is the number of entries in the params array
 * `prefix` is a character string to be appended to the parameters name, it defines the parameters position in the configuration file hierarchy (the section name in libconfig terminology).
 * The returned value is the number of parameters which have been assigned a value or -1 if a severe error occured
@@ -40,9 +44,6 @@ int config_libconfig_getlist(paramlist_def_t *ParamList, paramdef_t *params, int
 * `ParamList`  points to a structure, where `paramarray` field points to an array of `paramdef_t` structure, allocated by the function. It is used to return the values of the parameters.
 * The returned value is the number of occurrences in the list or -1 in case of severe error
 
-## utility functions and macros
-
-The configuration module also defines APIs to access the  `paramdef_t` and `configmodule_interface_t` fields. They are listed in the configuration module [include file `common/config/config_userapi.h`](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_userapi.h)
 
 [Configuration module developer main page](../../config/devusage.md)
 [Configuration module home](../../config.md)

common/config/DOC/config/devusage/struct.md

@@ -5,7 +5,6 @@ It is defined in include file [ common/config/config_paramdesc.h ](https://gitla
 |:-----------|:------------------------------------------------------------------|----:|
 | `optname`    | parameter name, as used when looking for it in the config source, 63 bytes max (64 with trailing \0) | I |
 | `helstr`     | pointer to a C string printed when using --help on the command line | I |
-| `paramflags` | bit mask, used to modify how the parameter is processed, or to return to the API caller how the parameter has been set, see list in the next table | IO |
 | `strptr` `strlistptr` `u8ptr` `i8ptr` `u16ptr` `i16ptr` `uptr` `iptr` `u64ptr` `i64ptr` `dblptr` `voidptr` | a pointer to a variable where the parameter value(s) will be returned. This field is an anonymous union, the supported pointer types have been built to avoid type mismatch warnings at compile time. | O |
 | `defstrval` `defstrlistval` `defuintval` `defintval` `defint64val` `defintarrayval` `defdblval` | this field is an anonymous union, it can be used to define the default value for the parameter. It is ignored if `PARAMFLAG_MANDATORY` is set in the `paramflags` field.| I |
 | `type` | Supported parameter types are defined as integer macros. Supported simple types are `TYPE_STRING`, parameter value is returned in `strptr` field,  `TYPE_INT8` `TYPE_UINT8` `TYPE_INT16` `TYPE_UINT16` `TYPE_INT32` `TYPE_UINT32` `TYPE_INT64` `TYPE_UINT64`, parameter value is returned in the corresponding uXptr or iXptr, `TYPE_MASK`, value is returned in `u32ptr`, `TYPE_DOUBLE` value is returned in `dblptr`, `TYPE_IPV4ADDR` value is returned in binary, network bytes order in `u32ptr` field. `TYPE_STRINGLIST`, `TYPE_INTARRAY` and `TYPE_UINTARRAY` are multiple values types. Multiple values are returned in respectively, `strlistptr`, `iptr` and `uptr` fields which then point to arrays. The  `numelt` field gives the number of item in the array. | I |
@@ -13,22 +12,6 @@ It is defined in include file [ common/config/config_paramdesc.h ](https://gitla
 | `chkPptr` | possible pointer to the structure containing the info used to check parameter values | I |
 | `processedvalue` | When `chkPptr` is not `ǸULL`, is used to return a value, computed from the original parameter, as read from the configuration source. | O |
 
-## `paramflags` bits definition
-
-
-| C macro bit definition               | usage                                                                                                                | I/O |
-|:-------------------------------------|:---------------------------------------------------------------------------------------------------------------------|----:|
-| `PARAMFLAG_MANDATORY`                | parameter is mandatory, comfiguration module will stop the process if it is not specified. Default value is ignored  | I |
-| `PARAMFLAG_DISABLECMDLINE`           | parameter cannot be specified on the command line                                                                    | I |
-| `PARAMFLAG_DONOTREAD`                | ignore the parameter, usefull when a parameter group is used in different context                                    | I |
-| `PARAMFLAG_NOFREE`                   | The end_configmodule API won't free the memory which has been possibly allocated to store the value of the parameter.| I |
-| `PARAMFLAG_BOOL`                     | Parameter is a boolean, it can be specified without a value to set it to true                                        | I |
-| `PARAMFLAG_CMDLINE_NOPREFIXENABLED`  | parameter can be specified without the prefix on the command line. Must be used with care, carefuly checking unicity, especially for short parameter names | I |
-| `PARAMFLAG_MALLOCINCONFIG`           | Memory for the parameter value has been allocated by the configuration module                                         |O |       
-| `PARAMFLAG_PARAMSET`                 | Parameter value has been explicitely set, as the parameter was specified either on the command line or the config source | O |
-| `PARAMFLAG_PARAMSETDEF`              | Parameter value has been set to it's default                                                                          | O |            
-
-
 # `paramlist_def_t`structure
 It is defined in include file [ common/config/config_paramdesc.h ](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_paramdesc.h#L160).
 It is used as an argument to `config_getlist` calls, to get values of multiple occurrences of group of parameters.

common/config/config_cmdline.c

@@ -41,7 +41,7 @@
 
 int parse_stringlist(paramdef_t *cfgoptions, char *val) {
   char *atoken;
-  char *tokctx = NULL;
+  char *tokctx;
   char *tmpval=strdup(val);
   int   numelt=0;
   cfgoptions->numelt=0;
@@ -167,8 +167,8 @@ int config_check_unknown_cmdlineopt(char *prefix) {
   char testprefix[CONFIG_MAXOPTLENGTH];
   int finalcheck = 0;
   memset(testprefix,0,sizeof(testprefix));
-  memset(testprefix,0,sizeof(testprefix));
 
+  memset(testprefix,0,sizeof(testprefix));
   if (prefix != NULL) {
     if (strcmp(prefix,CONFIG_CHECKALLSECTIONS) == 0)
       finalcheck = 1;
@@ -214,7 +214,7 @@ int config_process_cmdline(paramdef_t *cfgoptions,int numoptions, char *prefix)
 
     /* first check help options, either --help, -h or --help_<section> */
     if (strncmp(oneargv, "-h",2) == 0 || strncmp(oneargv, "--help",6) == 0 ) {
-      char *tokctx = NULL;
+      char *tokctx;
       pp=strtok_r(oneargv, "_",&tokctx);
       config_get_if()->argv_info[i] |= CONFIG_CMDLINEOPT_PROCESSED;
 
@@ -253,9 +253,7 @@ int config_process_cmdline(paramdef_t *cfgoptions,int numoptions, char *prefix)
         }
 
         if ( ((strlen(oneargv) == 2) && (strcmp(oneargv + 1,cfgpath) == 0))  || /* short option, one "-" */
-             ((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 )) || /* long option beginning with "--" */
-             ((strlen(oneargv) == 2) && (strcmp(oneargv + 1,cfgoptions[n].optname) == 0) && (cfgoptions[n].paramflags & PARAMFLAG_CMDLINE_NOPREFIXENABLED )) ||
-             ((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 ) && (cfgoptions[n].paramflags & PARAMFLAG_CMDLINE_NOPREFIXENABLED )) ) {
+             ((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 )) ) {
           char *valptr=NULL;
           int ret;
           config_get_if()->argv_info[i] |= CONFIG_CMDLINEOPT_PROCESSED;

common/config/config_paramdesc.h

@@ -48,7 +48,7 @@
 #define PARAMFLAG_DONOTREAD               (1 << 2)         // parameter must be ignored in get function
 #define PARAMFLAG_NOFREE                  (1 << 3)         // don't free parameter in end function
 #define PARAMFLAG_BOOL                    (1 << 4)         // integer param can be 0 or 1
-#define PARAMFLAG_CMDLINE_NOPREFIXENABLED (1 << 5)         // on the command line, allow a parameter to be specified without the prefix
+
 
 /*   Flags used by config modules to return info to calling modules and/or to  for internal usage*/
 #define PARAMFLAG_MALLOCINCONFIG          (1 << 15)        // parameter allocated in config module

common/config/config_userapi.c

@@ -172,7 +172,7 @@ int config_get_processedint(paramdef_t *cfgoption) {
   return ret;
 }
 void config_printhelp(paramdef_t *params,int numparams, char *prefix) {
-  printf("\n-----Help for section %-26s: %03i entries------\n",(prefix==NULL)?"(root section)":prefix,numparams);
+  printf("\n-----Help for section %-26s: %03i entries------\n",(prefix==NULL)?"(root section)":prefix ,numparams);
 
   for (int i=0 ; i<numparams ; i++) {
     printf("    %s%s: %s",
@@ -204,16 +204,6 @@ int config_execcheck(paramdef_t *params,int numparams, char *prefix) {
   return st;
 }
 
-int config_paramidx_fromname(paramdef_t *params,int numparams, char *name) {
-  for (int i=0; i<numparams ; i++) {
-    if (strcmp(name,params[i].optname) == 0)
-      return i;
-  }
-
-  fprintf(stderr,"[CONFIG]config_paramidx_fromname , %s is not a valid parameter name\n",name);
-  return -1;
-}
-
 int config_get(paramdef_t *params,int numparams, char *prefix) {
   int ret= -1;
 
@@ -448,7 +438,7 @@ int config_setdefault_intlist(paramdef_t *cfgoptions, char *prefix) {
     status=1;
 
     for (int j=0; j<cfgoptions->numelt ; j++) {
-      printf_params("[CONFIG] %s[%i] set to default value %i\n",cfgoptions->optname,j,(int)cfgoptions->iptr[j]);
+      printf_params("[CONFIG] %s[%i] set to default value %i\n",cfgoptions->optname ,j,(int)cfgoptions->iptr[j]);
     }
   }
 
@@ -460,9 +450,9 @@ int config_setdefault_double(paramdef_t *cfgoptions, char *prefix) {
   config_check_valptr(cfgoptions, (char **)&(cfgoptions->dblptr),sizeof(double));
 
   if( ((cfgoptions->paramflags & PARAMFLAG_MANDATORY) == 0)) {
-    *(cfgoptions->dblptr)=cfgoptions->defdblval;
+    *(cfgoptions->u64ptr)=cfgoptions->defdblval;
     status=1;
-    printf_params("[CONFIG] %s set to default value %lf\n",cfgoptions->optname, *(cfgoptions->dblptr));
+    printf_params("[CONFIG] %s set to default value %lf\n",cfgoptions->optname , *(cfgoptions->dblptr));
   }
 
   return status;
@@ -470,7 +460,7 @@ int config_setdefault_double(paramdef_t *cfgoptions, char *prefix) {
 
 int config_assign_ipv4addr(paramdef_t *cfgoptions, char *ipv4addr) {
   config_check_valptr(cfgoptions,(char **)&(cfgoptions->uptr), sizeof(int));
-  int rst=inet_pton(AF_INET, ipv4addr,cfgoptions->uptr );
+  int rst=inet_pton(AF_INET, ipv4addr ,cfgoptions->uptr );
 
   if (rst == 1 && *(cfgoptions->uptr) > 0) {
     printf_params("[CONFIG] %s: %s\n",cfgoptions->optname, ipv4addr);

common/config/config_userapi.h

@@ -39,7 +39,6 @@ extern "C"
 {
 #endif
 
-/* utility functions to ease usage of config module structures */
 #define CONFIG_GETSOURCE    ( (config_get_if()==NULL) ? NULL : config_get_if()->cfgmode       )
 #define CONFIG_GETNUMP      ( (config_get_if()==NULL) ? 0    : config_get_if()->num_cfgP      )
 #define CONFIG_GETP(P)      ( (config_get_if()==NULL) ? NULL : config_get_if()->cfgP[P]       )
@@ -47,8 +46,6 @@ extern "C"
 #define CONFIG_SETRTFLAG(P)   if (config_get_if()) { config_get_if()->rtflags |= P; }
 #define CONFIG_CLEARRTFLAG(P) if (config_get_if()) { config_get_if()->rtflags &= (~P); }
 #define CONFIG_ISPARAMFLAGSET(P,F) ( !!(P.paramflags & F))
-extern int config_paramidx_fromname(paramdef_t *params,int numparams, char *name);
-
 /* utility functions, to be used by configuration module and/or configuration libraries */
 extern configmodule_interface_t *config_get_if(void);
 extern char *config_check_valptr(paramdef_t *cfgoptions, char **ptr, int length) ;

common/ngran_types.h

@@ -41,13 +41,11 @@ typedef enum {
   ngran_ng_eNB_CU = 4,
   ngran_gNB_CU    = 5,
   ngran_eNB_DU    = 6,
-  ngran_gNB_DU    = 7,
-  ngran_eNB_MBMS_STA  = 8
+  ngran_gNB_DU    = 7
 } ngran_node_t;
 
 #define NODE_IS_MONOLITHIC(nOdE_TyPe) ((nOdE_TyPe) == ngran_eNB    || (nOdE_TyPe) == ngran_ng_eNB    || (nOdE_TyPe) == ngran_gNB)
 #define NODE_IS_CU(nOdE_TyPe)         ((nOdE_TyPe) == ngran_eNB_CU || (nOdE_TyPe) == ngran_ng_eNB_CU || (nOdE_TyPe) == ngran_gNB_CU)
 #define NODE_IS_DU(nOdE_TyPe)         ((nOdE_TyPe) == ngran_eNB_DU || (nOdE_TyPe) == ngran_gNB_DU)
-#define NODE_IS_MBMS(nOdE_TyPe)       ((nOdE_TyPe) == ngran_eNB_MBMS_STA)
 
 #endif

common/utils/LOG/log.c

@@ -45,19 +45,7 @@
 #include "common/config/config_userapi.h"
 // main log variables
 
-log_mem_cnt_t log_mem_d[2];
-int log_mem_flag=0;
-int log_mem_multi=1;
-volatile int log_mem_side=0;
-pthread_mutex_t log_mem_lock;
-pthread_cond_t log_mem_notify;
-pthread_t log_mem_thread;
-int log_mem_file_cnt=0;
-volatile int log_mem_write_flag=0;
-volatile int log_mem_write_side=0;
-char __log_mem_filename[1024]={0};
-char * log_mem_filename = &__log_mem_filename[0];
-char logmem_filename[1024] = {0};
+
 
 
 mapping log_level_names[] = {
@@ -404,8 +392,6 @@ int logInit (void) {
   register_log_component("eRAL","",RAL_ENB);
   register_log_component("mRAL","",RAL_UE);
   register_log_component("ENB_APP","log",ENB_APP);
-  register_log_component("MCE_APP","log",MCE_APP);
-  register_log_component("MME_APP","log",MME_APP);
   register_log_component("FLEXRAN_AGENT","log",FLEXRAN_AGENT);
   register_log_component("PROTO_AGENT","log",PROTO_AGENT);
   register_log_component("TMR","",TMR);
@@ -420,8 +406,6 @@ int logInit (void) {
   register_log_component("S1AP","",S1AP);
   register_log_component("F1AP","",F1AP);
   register_log_component("X2AP","",X2AP);
-  register_log_component("M2AP","",M2AP);
-  register_log_component("M3AP","",M3AP);
   register_log_component("SCTP","",SCTP);
   register_log_component("X2AP","",X2AP);
   register_log_component("LOADER","log",LOADER);
@@ -472,23 +456,15 @@ void logRecord_mt(const char *file, const char *func, int line, int comp, int le
   char log_buffer[MAX_LOG_TOTAL];
   va_list args;
   va_start(args, format);
-  if (log_mem_flag == 1) {
-    log_output_memory(file,func,line,comp,level, format,args);
-  } else {
   log_header(log_buffer,MAX_LOG_TOTAL,comp, level,format);
   g_log->log_component[comp].vprint(g_log->log_component[comp].stream,log_buffer, args);
-  }
   va_end(args);
 }
 
 void vlogRecord_mt(const char *file, const char *func, int line, int comp, int level, const char *format, va_list args ) {
   char log_buffer[MAX_LOG_TOTAL];
-  if (log_mem_flag == 1) {
-    log_output_memory(file,func,line,comp,level, format,args);
-  } else {
   log_header(log_buffer,MAX_LOG_TOTAL,comp, level,format);
   g_log->log_component[comp].vprint(g_log->log_component[comp].stream,log_buffer, args);
-  }
 }
 
 void log_dump(int component, void *buffer, int buffsize,int datatype, const char *format, ... ) {
@@ -670,265 +646,6 @@ void logClean (void) {
   }
 }
 
-extern int oai_exit;
-void flush_mem_to_file(void)
-{
-  int fp;
-  char f_name[1024];
-  struct timespec slp_tm;
-  slp_tm.tv_sec = 0;
-  slp_tm.tv_nsec = 10000;
-  
-  pthread_setname_np( pthread_self(), "flush_mem_to_file");
-
-  while (!oai_exit) {
-    pthread_mutex_lock(&log_mem_lock);
-    log_mem_write_flag=0;
-    pthread_cond_wait(&log_mem_notify, &log_mem_lock);
-    log_mem_write_flag=1;
-    pthread_mutex_unlock(&log_mem_lock);
-    // write!
-    if(log_mem_d[log_mem_write_side].enable_flag==0){
-      if(log_mem_file_cnt>5){
-        log_mem_file_cnt=5;
-        printf("log over write!!!\n");
-      }
-      snprintf(f_name,1024, "%s_%d.log",log_mem_filename,log_mem_file_cnt);
-      fp=open(f_name, O_WRONLY | O_CREAT, 0666);
-      int ret = write(fp, log_mem_d[log_mem_write_side].buf_p, log_mem_d[log_mem_write_side].buf_index);
-      if ( ret < 0) {
-          fprintf(stderr,"{LOG} %s %d Couldn't write in %s \n",__FILE__,__LINE__,f_name);
-          exit(EXIT_FAILURE);
-      }
-      close(fp);
-      log_mem_file_cnt++;
-      log_mem_d[log_mem_write_side].buf_index=0;
-      log_mem_d[log_mem_write_side].enable_flag=1;
-    }else{
-      printf("If you'd like to write log, you should set enable flag to 0!!!\n");
-      nanosleep(&slp_tm,NULL);
-    }
-  }
-}
-
-char logmem_log_level[NUM_LOG_LEVEL]={'E','W','I','D','T'};
-
-void log_output_memory(const char *file, const char *func, int line, int comp, int level, const char* format,va_list args)
-{
-  //logRecord_mt(file,func,line, pthread_self(), comp, level, format, ##args)
-  int len = 0;
-  log_component_t *c;
-  char *log_start;
-  char *log_end;
-  /* The main difference with the version above is the use of this local log_buffer.
-   * The other difference is the return value of snprintf which was not used
-   * correctly. It was not a big problem because in practice MAX_LOG_TOTAL is
-   * big enough so that the buffer is never full.
-   */
-  char log_buffer[MAX_LOG_TOTAL];
-
-  /* for no gcc warnings */
-  (void)log_start;
-  (void)log_end;
-
-
-  c = &g_log->log_component[comp];
-
-  //VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_LOG_RECORD, VCD_FUNCTION_IN);
-
-  // make sure that for log trace the extra info is only printed once, reset when the level changes
-  if (level == OAILOG_TRACE) {
-    log_start = log_buffer;
-    len = vsnprintf(log_buffer, MAX_LOG_TOTAL, format, args);
-    if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-    log_end = log_buffer + len;
-  } else {
-    if ( (g_log->flag & 0x001) || (c->flag & 0x001) ) {
-      len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "%s",
-                      log_level_highlight_start[level]);
-      if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-    }
-
-    log_start = log_buffer + len;
-
-//    if ( (g_log->flag & 0x004) || (c->flag & 0x004) ) {
-      len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "[%s]",
-                      g_log->log_component[comp].name);
-      if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-//    }
-
-    if ( (level >= OAILOG_ERR) && (level <= OAILOG_TRACE) ) {
-      len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "[%c]",
-                      logmem_log_level[level]);
-      if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-    }
-
-    if ( (g_log->flag & FLAG_THREAD) || (c->flag & FLAG_THREAD) ) {
-#     define THREAD_NAME_LEN 128
-      char threadname[THREAD_NAME_LEN];
-      if (pthread_getname_np(pthread_self(), threadname, THREAD_NAME_LEN) != 0)
-      {
-        perror("pthread_getname_np : ");
-      } else {
-        len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "[%s]", threadname);
-        if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-      }
-#     undef THREAD_NAME_LEN
-    }
-
-    if ( (g_log->flag & FLAG_FUNCT) || (c->flag & FLAG_FUNCT) ) {
-      len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "[%s] ",
-                      func);
-      if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-    }
-
-    if ( (g_log->flag & FLAG_FILE_LINE) || (c->flag & FLAG_FILE_LINE) ) {
-      len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "[%s:%d]",
-                      file, line);
-      if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-    }
-
-/*    len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "[%08lx]", thread_id);
-    if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-
-    struct timeval gettime;
-    gettimeofday(&gettime,NULL);
-    len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "[%ld.%06ld]", gettime.tv_sec, gettime.tv_usec);
-    if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-*/
-    if ( (g_log->flag & FLAG_NOCOLOR) || (c->flag & FLAG_NOCOLOR) ) {
-      len += snprintf(&log_buffer[len], MAX_LOG_TOTAL - len, "%s",
-          log_level_highlight_end[level]);
-      if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-    }
-
-    len += vsnprintf(&log_buffer[len], MAX_LOG_TOTAL - len, format, args);
-    if (len > MAX_LOG_TOTAL) len = MAX_LOG_TOTAL;
-    log_end = log_buffer + len;
-  }
-
-  //va_end(args);
-
-  // OAI printf compatibility
-    if(log_mem_flag==1){
-      if(log_mem_d[log_mem_side].enable_flag==1){
-        int temp_index;
-        temp_index=log_mem_d[log_mem_side].buf_index;
-        if(temp_index+len+1 < LOG_MEM_SIZE){
-          log_mem_d[log_mem_side].buf_index+=len;
-          memcpy(&log_mem_d[log_mem_side].buf_p[temp_index],log_buffer,len);
-        }else{
-          log_mem_d[log_mem_side].enable_flag=0;
-          if(log_mem_d[1-log_mem_side].enable_flag==1){
-            temp_index=log_mem_d[1-log_mem_side].buf_index;
-            if(temp_index+len+1 < LOG_MEM_SIZE){
-              log_mem_d[1-log_mem_side].buf_index+=len;
-              log_mem_side=1-log_mem_side;
-              memcpy(&log_mem_d[log_mem_side].buf_p[temp_index],log_buffer,len);
-              /* write down !*/
-              if (pthread_mutex_lock(&log_mem_lock) != 0) {
-                return;
-              }
-              if(log_mem_write_flag==0){
-                log_mem_write_side=1-log_mem_side;
-                if(pthread_cond_signal(&log_mem_notify) != 0) {
-                }
-              }
-              if(pthread_mutex_unlock(&log_mem_lock) != 0) {
-                return;
-              }
-            }else{
-              log_mem_d[1-log_mem_side].enable_flag=0;
-            }
-          }
-        }
-      }
-    }else{
-      fwrite(log_buffer, len, 1, stdout);
-    }
-}
-
-int logInit_log_mem (void)
-{
-  if(log_mem_flag==1){
-    if(log_mem_multi==1){
-      printf("log-mem multi!!!\n");
-      log_mem_d[0].buf_p = malloc(LOG_MEM_SIZE);
-      log_mem_d[0].buf_index=0;
-      log_mem_d[0].enable_flag=1;
-      log_mem_d[1].buf_p = malloc(LOG_MEM_SIZE);
-      log_mem_d[1].buf_index=0;
-      log_mem_d[1].enable_flag=1;
-      log_mem_side=0;
-      if ((pthread_mutex_init (&log_mem_lock, NULL) != 0)
-          || (pthread_cond_init (&log_mem_notify, NULL) != 0)) {
-        log_mem_d[1].enable_flag=0;
-        return -1;
-      }
-      pthread_create(&log_mem_thread, NULL, (void *(*)(void *))flush_mem_to_file, (void*)NULL);
-    }else{
-      printf("log-mem single!!!\n");
-      log_mem_d[0].buf_p = malloc(LOG_MEM_SIZE);
-      log_mem_d[0].buf_index=0;
-      log_mem_d[0].enable_flag=1;
-      log_mem_d[1].enable_flag=0;
-      log_mem_side=0;
-    }
-  }else{
-    log_mem_d[0].buf_p=NULL;
-    log_mem_d[1].buf_p=NULL;
-    log_mem_d[0].enable_flag=0;
-    log_mem_d[1].enable_flag=0;
-  }
-
-  printf("log init done\n");
-  
-  return 0;
-}
-
-void close_log_mem(void){
-  int fp;
-  char f_name[1024];
-
-  if(log_mem_flag==1){
-    log_mem_d[0].enable_flag=0;
-    log_mem_d[1].enable_flag=0;
-    usleep(10); // wait for log writing
-    while(log_mem_write_flag==1){
-      usleep(100);
-    }
-    if(log_mem_multi==1){
-      snprintf(f_name,1024, "%s_%d.log",log_mem_filename,log_mem_file_cnt);
-      fp=open(f_name, O_WRONLY | O_CREAT, 0666);
-      int ret = write(fp, log_mem_d[0].buf_p, log_mem_d[0].buf_index);
-      if ( ret < 0) {
-          fprintf(stderr,"{LOG} %s %d Couldn't write in %s \n",__FILE__,__LINE__,f_name);
-          exit(EXIT_FAILURE);
-      }
-      close(fp);
-      free(log_mem_d[0].buf_p);
-      
-      snprintf(f_name,1024, "%s_%d.log",log_mem_filename,log_mem_file_cnt);
-      fp=open(f_name, O_WRONLY | O_CREAT, 0666);
-      ret = write(fp, log_mem_d[1].buf_p, log_mem_d[1].buf_index);
-      if ( ret < 0) {
-          fprintf(stderr,"{LOG} %s %d Couldn't write in %s \n",__FILE__,__LINE__,f_name);
-          exit(EXIT_FAILURE);
-      }
-      close(fp);
-      free(log_mem_d[1].buf_p);
-    }else{
-      fp=open(log_mem_filename, O_WRONLY | O_CREAT, 0666);
-      int ret = write(fp, log_mem_d[0].buf_p, log_mem_d[0].buf_index);
-      if ( ret < 0) {
-          fprintf(stderr,"{LOG} %s %d Couldn't write in %s \n",__FILE__,__LINE__,log_mem_filename);
-          exit(EXIT_FAILURE);
-       }
-      close(fp);
-      free(log_mem_d[0].buf_p);
-    }
-  }
- }
 
 #ifdef LOG_TEST
 

common/utils/LOG/log.h

@@ -118,8 +118,6 @@ extern "C" {
 #define FLAG_NOCOLOR     0x0001  /*!< \brief use colors in log messages, depending on level */
 #define FLAG_THREAD      0x0008  /*!< \brief display thread name in log messages */
 #define FLAG_LEVEL       0x0010  /*!< \brief display log level in log messages */
-#define FLAG_FUNCT       0x0020
-#define FLAG_FILE_LINE   0x0040
 #define FLAG_TIME        0x0100
 #define FLAG_INITIALIZED 0x8000
 
@@ -213,8 +211,6 @@ typedef enum {
   RAL_ENB,
   RAL_UE,
   ENB_APP,
-  MCE_APP,
-  MME_APP,
   FLEXRAN_AGENT,
   TMR,
   USIM,
@@ -222,8 +218,6 @@ typedef enum {
   PROTO_AGENT,
   F1U,
   X2AP,
-  M2AP,
-  M3AP,
   LOADER,
   ASN,
   NFAPI_VNF,
@@ -313,19 +307,6 @@ int  is_newline( char *str, int size);
 
 int register_log_component(char *name, char *fext, int compidx);
 
-#define LOG_MEM_SIZE 100*1024*1024
-#define LOG_MEM_FILE "./logmem.log"
-void flush_mem_to_file(void);
-void log_output_memory(const char *file, const char *func, int line, int comp, int level, const char* format,va_list args);
-int logInit_log_mem(void);
-void close_log_mem(void);
-  
-typedef struct {
-  char* buf_p;
-  int buf_index;
-  int enable_flag;
-} log_mem_cnt_t;
-
 /* @}*/
 
 /*!\fn int32_t write_file_matlab(const char *fname, const char *vname, void *data, int length, int dec, char format);

common/utils/LOG/log_extern.h

@@ -27,6 +27,4 @@ extern log_t *g_log;
 extern mapping log_level_names[];
 extern mapping log_options[];
 extern mapping log_maskmap[];
-extern int log_mem_flag;
-extern char * log_mem_filename;
-extern char logmem_filename[1024];
+

common/utils/LOG/vcd_signal_dumper.c

@@ -63,8 +63,6 @@ struct vcd_module_s {
 
 const char* eurecomVariablesNames[] = {
   "frame_number_TX0_eNB",
-  "mask_ru",
-  "mask_tx_ru",
   "frame_number_TX1_eNB",
   "frame_number_RX0_eNB",
   "frame_number_RX1_eNB",
@@ -80,45 +78,6 @@ const char* eurecomVariablesNames[] = {
   "subframe_number_TX1_RU",
   "subframe_number_RX0_RU",
   "subframe_number_RX1_RU",
-  "subframe_number_if4p5_north_out",
-  "frame_number_if4p5_north_out",
-  "subframe_number_if4p5_north_asynch_in",
-  "frame_number_if4p5_north_asynch_in",
-  "subframe_number_if4p5_south_out_ru",
-  "subframe_number_if4p5_south_out_ru1",
-  "subframe_number_if4p5_south_out_ru2",
-  "frame_number_if4p5_south_out_ru",
-  "frame_number_if4p5_south_out_ru1",
-  "frame_number_if4p5_south_out_ru2",
-  "subframe_number_if4p5_south_in_ru",
-  "subframe_number_if4p5_south_in_ru1",
-  "subframe_number_if4p5_south_in_ru2",
-  "frame_number_if4p5_south_in_ru",
-  "frame_number_if4p5_south_in_ru1",
-  "frame_number_if4p5_south_in_ru2",
-  "subframe_number_wakeup_l1s_ru",
-  "subframe_number_wakeup_l1s_ru1",
-  "subframe_number_wakeup_l1s_ru2",
-  "frame_number_wakeup_l1s_ru",
-  "frame_number_wakeup_l1s_ru1",
-  "frame_number_wakeup_l1s_ru2",
-  "subframe_number_wakeup_rxtx_rx_ru",
-  "subframe_number_wakeup_rxtx_rx_ru1",
-  "subframe_number_wakeup_rxtx_rx_ru2",
-  "frame_number_wakeup_rxtx_rx_ru",
-  "frame_number_wakeup_rxtx_rx_ru1",
-  "frame_number_wakeup_rxtx_rx_ru2",
-  "subframe_number_wakeup_rxtx_tx_ru",
-  "subframe_number_wakeup_rxtx_tx_ru1",
-  "subframe_number_wakeup_rxtx_tx_ru2",
-  "frame_number_wakeup_rxtx_tx_ru",
-  "frame_number_wakeup_rxtx_tx_ru1",
-  "frame_number_wakeup_rxtx_tx_ru2",
-  "ic_enb",
-  "ic_enb1",
-  "ic_enb2",
-  "l1_proc_ic",
-  "l1_proc_tx_ic",
   "runtime_TX_eNB",
   "runtime_RX_eNB",
   "frame_number_TX0_UE",
@@ -248,10 +207,8 @@ const char* eurecomFunctionsNames[] = {
   "trx_write",
   "trx_read_ue",
   "trx_write_ue",
-  "trx_read_if0",
-  "trx_read_if1",
-  "trx_write_if0",
-  "trx_write_if1",
+  "trx_read_if",
+  "trx_write_if",
   "eNB_thread_rxtx0",
   "eNB_thread_rxtx1",
   "ue_thread_synch",
@@ -269,9 +226,6 @@ const char* eurecomFunctionsNames[] = {
   "ue_lock_mutex_rxtx_for_cnt_decrement1",
   "ue_lock_mutex_rxtx_for_cnt_increment0",
   "ue_lock_mutex_rxtx_for_cnt_increment1",
-  "lock_mutex_ru",
-  "lock_mutex_ru1",
-  "lock_mutex_ru2",
   /* simulation signals */
   "do_DL_sig",
   "do_UL_sig",
@@ -302,34 +256,10 @@ const char* eurecomFunctionsNames[] = {
   "phy_procedures_eNb_tx1",
   "phy_procedures_ru_feprx0",
   "phy_procedures_ru_feprx1",
-  "phy_procedures_ru_feprx2",
-  "phy_procedures_ru_feprx3",
-  "phy_procedures_ru_feprx4",
-  "phy_procedures_ru_feprx5",
-  "phy_procedures_ru_feprx6",
-  "phy_procedures_ru_feprx7",
-  "phy_procedures_ru_feprx8",
-  "phy_procedures_ru_feprx9",
   "phy_procedures_ru_feptx_ofdm0",
   "phy_procedures_ru_feptx_ofdm1",
-  "phy_procedures_ru_feptx_ofdm2",
-  "phy_procedures_ru_feptx_ofdm3",
-  "phy_procedures_ru_feptx_ofdm4",
-  "phy_procedures_ru_feptx_ofdm5",
-  "phy_procedures_ru_feptx_ofdm6",
-  "phy_procedures_ru_feptx_ofdm7",
-  "phy_procedures_ru_feptx_ofdm8",
-  "phy_procedures_ru_feptx_ofdm9",
   "phy_procedures_ru_feptx_prec0",
   "phy_procedures_ru_feptx_prec1",
-  "phy_procedures_ru_feptx_prec2",
-  "phy_procedures_ru_feptx_prec3",
-  "phy_procedures_ru_feptx_prec4",
-  "phy_procedures_ru_feptx_prec5",
-  "phy_procedures_ru_feptx_prec6",
-  "phy_procedures_ru_feptx_prec7",
-  "phy_procedures_ru_feptx_prec8",
-  "phy_procedures_ru_feptx_prec9",
   "phy_procedures_eNb_rx_uespec0",
   "phy_procedures_eNb_rx_uespec1",
   "phy_procedures_ue_tx",
@@ -452,8 +382,6 @@ const char* eurecomFunctionsNames[] = {
   "pdcp_fifo_read_buffer",
   "pdcp_fifo_flush",
   "pdcp_fifo_flush_buffer",
-  "pdcp_mbms_fifo_read",
-  "pdcp_mbms_fifo_read_buffer",
   /* RRC signals  */
   "rrc_rx_tx",
   "rrc_mac_config_req",
@@ -475,12 +403,8 @@ const char* eurecomFunctionsNames[] = {
   "test",
   
   /* IF4/IF5 signals */
-  "send_if4_ru",
-  "send_if4_ru1",
-  "send_if4_ru2",
-  "recv_if4_ru",
-  "recv_if4_ru1",
-  "recv_if4_ru2",
+  "send_if4",
+  "recv_if4",
   "send_if5",
   "recv_if5",