small change in ulsch_decoder to allow segment even if parity-check fails but CRC passes.

Conflicts:
	openair1/PHY/NR_TRANSPORT/pucch_rx.c
	openair1/PHY/NR_UE_TRANSPORT/pucch_nr.c
	openair1/SIMULATION/NR_PHY/dlsim.c
	openair1/SIMULATION/NR_PHY/pucchsim.c

.vscode/launch.json

@@ -25,4 +25,4 @@
             ]
         }
     ]
-}
+}

charts/physims/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-physim
+description: A Helm chart for physical simulators network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulators
+  - RAN
+  - 4G
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-dlsim
+description: A Helm subchart for dlsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - dlsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-dlsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-dlsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-dlsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-dlsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/dlsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-dlsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-dlsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-dlsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-dlsim.labels" -}}
+helm.sh/chart: {{ include "oai-dlsim.chart" . }}
+{{ include "oai-dlsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-dlsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-dlsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-dlsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-dlsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/dlsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-dlsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-dlsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-dlsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-dlsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-dlsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015100" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/dlsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-dlsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-dlsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-dlsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/dlsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-dlsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-dlsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ldpctest/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-ldpctest
+description: A Helm subchart for ldpctest network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - ldpctest
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/ldpctest/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-ldpctest.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-ldpctest.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-ldpctest.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-ldpctest.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/ldpctest/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-ldpctest.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-ldpctest.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-ldpctest.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-ldpctest.labels" -}}
+helm.sh/chart: {{ include "oai-ldpctest.chart" . }}
+{{ include "oai-ldpctest.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-ldpctest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ldpctest.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-ldpctest.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-ldpctest.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/ldpctest/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-ldpctest.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-ldpctest.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-ldpctest.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-ldpctest
+        # volumeMounts:
+        # - mountPath: /opt/oai-ldpctest/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015102" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/ldpctest/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-ldpctest.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-ldpctest
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-ldpctest.selectorLabels" . | nindent 4 }}

charts/physims/charts/ldpctest/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-ldpctest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-ldpctest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlschsim
+description: A Helm subchart for nr-dlschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlschsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-dlschsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-dlschsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-dlschsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-dlschsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/nr-dlschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlschsim.chart" . }}
+{{ include "oai-nr-dlschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlschsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-dlschsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-nr-dlschsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-nr-dlschsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-nr-dlschsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-nr-dlschsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015106" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/nr-dlschsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-dlschsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-nr-dlschsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-nr-dlschsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-dlschsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-nr-dlschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim
+description: A Helm subchart for nr-dlsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-dlsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-dlsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-dlsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-dlsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/nr-dlsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim.chart" . }}
+{{ include "oai-nr-dlsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-dlsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-nr-dlsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-nr-dlsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-nr-dlsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-nr-dlsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015105" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/nr-dlsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-dlsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-nr-dlsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-nr-dlsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-dlsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-nr-dlsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim
+description: A Helm subchart for nr-pbchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-pbchsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-pbchsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-pbchsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-pbchsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/nr-pbchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim.chart" . }}
+{{ include "oai-nr-pbchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-pbchsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-nr-pbchsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-nr-pbchsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-nr-pbchsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-nr-pbchsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015104" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/nr-pbchsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-pbchsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-nr-pbchsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-nr-pbchsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-pbchsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-nr-pbchsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-prachsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-prachsim
+description: A Helm subchart for nr-prachsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-prachsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-prachsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-prachsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-prachsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-prachsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-prachsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/nr-prachsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-prachsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-prachsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-prachsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-prachsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-prachsim.chart" . }}
+{{ include "oai-nr-prachsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-prachsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-prachsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-prachsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-prachsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-prachsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-prachsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-nr-prachsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-nr-prachsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-nr-prachsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-nr-prachsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015112" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/nr-prachsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-prachsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-nr-prachsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-nr-prachsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-prachsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-nr-prachsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-prachsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pucchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pucchsim
+description: A Helm subchart for nr-pucchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pucchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pucchsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-pucchsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-pucchsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-pucchsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-pucchsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/nr-pucchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pucchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pucchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pucchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pucchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pucchsim.chart" . }}
+{{ include "oai-nr-pucchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pucchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pucchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pucchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pucchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pucchsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-pucchsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-nr-pucchsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-nr-pucchsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-nr-pucchsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-nr-pucchsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015109" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/nr-pucchsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-pucchsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-nr-pucchsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-nr-pucchsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-pucchsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-nr-pucchsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pucchsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulschsim
+description: A Helm subchart for nr-ulschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulschsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-ulschsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-ulschsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-ulschsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-ulschsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/nr-ulschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulschsim.chart" . }}
+{{ include "oai-nr-ulschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulschsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-ulschsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-nr-ulschsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-nr-ulschsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-nr-ulschsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-nr-ulschsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015108" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/nr-ulschsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-ulschsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-nr-ulschsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-nr-ulschsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-ulschsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-nr-ulschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim
+description: A Helm subchart for nr-ulsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-ulsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-ulsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-ulsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-ulsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/nr-ulsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim.chart" . }}
+{{ include "oai-nr-ulsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-ulsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-nr-ulsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-nr-ulsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-nr-ulsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-nr-ulsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015111" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/nr-ulsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-nr-ulsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-nr-ulsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-nr-ulsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-ulsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-nr-ulsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/polartest/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-polartest
+description: A Helm subchart for polartest network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - polartest
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/polartest/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-polartest.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-polartest.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-polartest.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-polartest.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/polartest/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-polartest.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-polartest.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-polartest.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-polartest.labels" -}}
+helm.sh/chart: {{ include "oai-polartest.chart" . }}
+{{ include "oai-polartest.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-polartest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-polartest.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-polartest.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-polartest.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/polartest/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-polartest.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-polartest.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-polartest.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-polartest
+        # volumeMounts:
+        # - mountPath: /opt/oai-polartest/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015103" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/polartest/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-polartest.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-polartest
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-polartest.selectorLabels" . | nindent 4 }}

charts/physims/charts/polartest/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-polartest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-polartest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/smallblocktest/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-smallblocktest
+description: A Helm subchart for smallblocktest network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - smallblocktest
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/smallblocktest/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-smallblocktest.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-smallblocktest.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-smallblocktest.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-smallblocktest.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/smallblocktest/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-smallblocktest.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-smallblocktest.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-smallblocktest.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-smallblocktest.labels" -}}
+helm.sh/chart: {{ include "oai-smallblocktest.chart" . }}
+{{ include "oai-smallblocktest.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-smallblocktest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-smallblocktest.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-smallblocktest.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-smallblocktest.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/smallblocktest/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-smallblocktest.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-smallblocktest.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-smallblocktest.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-smallblock
+        # volumeMounts:
+        # - mountPath: /opt/oai-smallblocktest/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015107" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/smallblocktest/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-smallblocktest.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-smallblocktest
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-smallblocktest.selectorLabels" . | nindent 4 }}

charts/physims/charts/smallblocktest/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-smallblocktest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-smallblocktest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ulsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-ulsim
+description: A Helm subchart for ulsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - ulsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/ulsim/templates/NOTES.txt

@@ -0,0 +1,15 @@
+1. Get the application URL by running these commands:
+{{- if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-ulsim.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-ulsim.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-ulsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-ulsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
+{{- end }}

charts/physims/charts/ulsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-ulsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-ulsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-ulsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-ulsim.labels" -}}
+helm.sh/chart: {{ include "oai-ulsim.chart" . }}
+{{ include "oai-ulsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-ulsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ulsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-ulsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/ulsim/templates/deployment.yaml

@@ -0,0 +1,49 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-ulsim.labels" . | nindent 4 }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "oai-ulsim.selectorLabels" . | nindent 6 }}
+  strategy:
+    type: Recreate
+  template:
+    metadata:
+      labels:
+        {{- include "oai-ulsim.selectorLabels" . | nindent 8 }}
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+          name: oai-ulsim
+        # volumeMounts:
+        # - mountPath: /opt/oai-ulsim/certs
+        #   name: certs
+        command: ["/bin/sh", "-c"]
+        args:
+        - >  
+          export OPENAIR_DIR=/opt/oai-physim &&
+          cd cmake_targets/autotests &&
+          ./run_exec_autotests.bash -g "015101" -q -np -b &&
+          echo "FINISHED" &&
+          sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Always
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30

charts/physims/charts/ulsim/templates/service.yaml

@@ -0,0 +1,20 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Chart.Name }}
+  labels:
+    {{- include "oai-ulsim.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+{{- if  contains "ClusterIP" .Values.service.type }}
+  clusterIP: None
+{{- end }}
+  ports:
+    - name: oai-ulsim
+      # Port accessible outside cluster
+      port: {{ .Values.service.port }}
+      # Port to forward to inside the pod
+      targetPort: {{ .Values.service.Port }}
+      protocol: TCP
+  selector:
+    {{- include "oai-ulsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/ulsim/values.yaml

@@ -0,0 +1,63 @@
+# Default values for oai-ulsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+namespace: "oaicicd-ran-tmp"
+
+image:
+  registry: local
+  repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+  version: temp
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-ulsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: true
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/templates/rbac.yaml

@@ -0,0 +1,12 @@
+apiVersion: rbac.authorization.k8s.io/v1beta1
+kind: ClusterRoleBinding
+metadata:
+  name: {{ .Chart.Name }}-{{ .Values.global.namespace }}-rbac
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: cluster-admin
+subjects:
+- kind: ServiceAccount
+  name: {{ .Values.global.serviceAccountName }}
+  namespace: {{ .Values.global.namespace }}

charts/physims/templates/serviceaccount.yaml

@@ -0,0 +1,4 @@
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ .Values.global.serviceAccountName }}

charts/physims/values.yaml

@@ -0,0 +1,84 @@
+# Default values for oai-physim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+global:
+  serviceAccountName: oai-physim-sa
+  namespace: "oaicicd-ran-tmp"
+  image:
+    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran-tmp/oai-physim
+    version: TAG
+
+## Declaring values specific to coressponding physim to overwrite
+
+dlsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+ulsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+ldpctest:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+polartest:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+nr-pbchsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+nr-dlsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+nr-dlschsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+smallblocktest:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+nr-ulschsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+nr-pucchsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+nr-ulsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80
+
+nr-prachsim:
+  replicaCount: 1
+  service:
+    type: ClusterIP
+    port: 80

ci-scripts/Jenkinsfile-GitLab-Container

@@ -0,0 +1,327 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Location of the executor node
+def nodeExecutor = params.nodeExecutor
+
+// Tags to shorten pipeline duration
+def doMandatoryTests = false
+def doFullTestsuite = false
+
+//
+def gitCommitAuthorEmailAddr
+
+pipeline {
+  agent {
+    label nodeExecutor
+  }
+  options {
+    disableConcurrentBuilds()
+    timestamps()
+    gitLabConnection('OAI GitLab')
+    ansiColor('xterm')
+  }
+
+  stages {
+    stage ("Verify Parameters") {
+      steps {
+        script {
+          JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"'
+          JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
+
+          echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+          def allParametersPresent = true
+
+          echo '\u2705 \u001B[32mVerify Labels\u001B[0m'
+          if ("MERGE".equals(env.gitlabActionType)) {
+            LABEL_CHECK = sh returnStdout: true, script: 'ci-scripts/checkGitLabMergeRequestLabels.sh --mr-id ' + env.gitlabMergeRequestIid
+            LABEL_CHECK = LABEL_CHECK.trim()
+            if (LABEL_CHECK == 'NONE') {
+              def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Your merge request has none of the mandatory labels:\n\n"
+              message += " - BUILD-ONLY\n"
+              message += " - 4G-LTE\n"
+              message += " - 5G-NR\n"
+              message += " - CI\n\n"
+              message += "Not performing CI due to lack of labels"
+              addGitLabMRComment comment: message
+              error('Not performing CI due to lack of labels')
+            } else if (LABEL_CHECK == 'FULL') {
+              doMandatoryTests = true
+              doFullTestsuite = true
+            } else if (LABEL_CHECK == 'SHORTEN-5G') {
+              doMandatoryTests = true
+            } else {
+              def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): We will perform only build stages on your Merge Request"
+              addGitLabMRComment comment: message
+            }
+          } else {
+            doMandatoryTests = true
+            doFullTestsuite = true
+          }
+        }
+      }
+    }
+    stage ("Verify Guidelines") {
+      steps {
+        echo "Git URL     is ${GIT_URL}"
+        echo "GitLab Act    is ${env.gitlabActionType}"
+        script {
+          if ("MERGE".equals(env.gitlabActionType)) {
+            // since a bit, in push events, gitlabUserEmail is not populated
+            gitCommitAuthorEmailAddr = env.gitlabUserEmail
+            echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
+            // GitLab-Jenkins plugin integration is lacking to perform the merge by itself
+            // Doing it manually --> it may have merge conflicts
+            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
+          } else {
+            echo "Git Branch    is ${GIT_BRANCH}"
+            echo "Git Commit    is ${GIT_COMMIT}"
+            // since a bit, in push events, gitlabUserEmail is not populated
+            gitCommitAuthorEmailAddr = sh returnStdout: true, script: 'git log -n1 --pretty=format:%ae ${GIT_COMMIT}'
+            gitCommitAuthorEmailAddr = gitCommitAuthorEmailAddr.trim()
+            echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
+            sh "git log -n1 --pretty=format:\"%s\" > .git/CI_COMMIT_MSG"
+          }
+        }
+      }
+      post {
+        failure {
+          script {
+            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Merge Conflicts -- Cannot perform CI"
+            addGitLabMRComment comment: message
+            currentBuild.result = 'FAILURE'
+          }
+        }
+      }
+    }
+    // Build Stages are Mandatory
+    // Later we will add a Ubuntu20 build
+    stage ("Image Building Processes") {
+      parallel {
+        stage ("Ubuntu18 Build") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-Ubuntu18-Image-Builder', 'Ubuntu18-Images-Build')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-Ubuntu18-Image-Builder')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("RHEL8 Build") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-RHEL8-Image-Builder', 'RHEL8-Images-Build')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-RHEL8-Image-Builder')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("CppCheck Analysis") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-cppcheck', 'CppCheck Analysis')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-cppcheck')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+      }
+    }
+    stage ("Image Test Processes") {
+      parallel {
+        stage ("Physical Simulators") {
+          when { expression {doMandatoryTests} }
+          steps {
+            script {
+              triggerSlaveJob ('RAN-PhySim-Cluster', 'Test-Physim-Cluster')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-PhySim-Cluster')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("RF Simulators") {
+          when { expression {doMandatoryTests} }
+          steps {
+            script {
+              triggerSlaveJob ('RAN-RF-Sim-Test', 'Test-RF-Sim-Container')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-RF-Sim-Test')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+  post {
+    always {
+      script {
+        def eSubject = JOB_NAME + ' - Build # ' + BUILD_ID + ' - ' + currentBuild.result + '!'
+        def eBody = "Hi,\n\n"
+        eBody += "Here are attached HTML report files for " + JOB_NAME + "  - Build # " + BUILD_ID + " - " + currentBuild.result + "!\n\n"
+        eBody += "Regards,\n"
+        eBody += "OAI CI Team"
+        emailext attachmentsPattern: '*results*.html',
+           body: eBody,
+           replyTo: 'no-reply@openairinterface.org',
+           subject: eSubject,
+           to: gitCommitAuthorEmailAddr
+
+        if (fileExists('.git/CI_COMMIT_MSG')) {
+          sh "rm -f .git/CI_COMMIT_MSG"
+        }
+      }
+    }
+    success {
+      script {
+        def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ")"
+        if ("MERGE".equals(env.gitlabActionType)) {
+          echo "This is a MERGE event"
+          addGitLabMRComment comment: message
+        }
+      }
+    }
+    failure {
+      script {
+        def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ")"
+        if ("MERGE".equals(env.gitlabActionType)) {
+          echo "This is a MERGE event"
+          addGitLabMRComment comment: message
+        }
+      }
+    }
+  }
+}
+
+// ----  Slave Job functions
+
+def triggerSlaveJob (jobName, gitlabStatusName) {
+  // Workaround for the "cancelled" GitLab pipeline notification
+  // The slave job is triggered with the propagate false so the following commands are executed
+  // Its status is now PASS/SUCCESS from a stage pipeline point of view
+  // localStatus variable MUST be analyzed to properly assess the status
+  localStatus = build job: jobName,
+    parameters: [
+      string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+      string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+      string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+      booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
+      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+    ], propagate: false
+  localResult = localStatus.getResult()
+  echo "${jobName} Slave Job status is ${localResult}"
+  gitlabCommitStatus(name: gitlabStatusName) {
+    if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
+       echo "${jobName} Slave Job is OK"
+    } else {
+       echo "${jobName} Slave Job is KO"
+       sh "ci-scripts/fail.sh"
+    }
+  }
+}
+
+def triggerSlaveJobNoGitLab (jobName) {
+  // Workaround for the "cancelled" GitLab pipeline notification
+  // The slave job is triggered with the propagate false so the following commands are executed
+  // Its status is now PASS/SUCCESS from a stage pipeline point of view
+  // localStatus variable MUST be analyzed to properly assess the status
+  localStatus = build job: jobName,
+    parameters: [
+      string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
+      string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
+      string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
+      booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
+      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
+    ], propagate: false
+  localResult = localStatus.getResult()
+  echo "${jobName} Slave Job status is ${localResult}"
+  if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
+     echo "${jobName} Slave Job is OK"
+  } else {
+     echo "${jobName} Slave Job is KO"
+     sh "ci-scripts/fail.sh"
+  }
+}
+
+def finalizeSlaveJob(jobName) {
+  // In case of any non-success, we are retrieving the HTML report of the last completed
+  // slave job. The only drop-back is that we may retrieve the HTML report of a previous build
+  fileName = "test_results-${jobName}.html"
+  if (!fileExists(fileName)) {
+    copyArtifacts(projectName: jobName,
+      filter: 'test_results*.html',
+      selector: lastCompleted())
+    if (fileExists(fileName)) {
+      sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' ${fileName}"
+      archiveArtifacts artifacts: fileName
+    }
+  }
+}

ci-scripts/Jenkinsfile-git-dashboard

@@ -1,3 +1,4 @@
+#!/bin/groovy
 /*
  * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
  * contributor license agreements.  See the NOTICE file distributed with
@@ -19,19 +20,26 @@
  *      contact@openairinterface.org
  */
 
-#include "types.h"
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
 
-#ifndef ENUM_VALUE_TYPE_H_
-#define ENUM_VALUE_TYPE_H_
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
 
-extern uint32_t last_enum_value;
 
-int enum_value_dissect_from_buffer(
-    types_t *type, ui_set_signal_text_cb_t ui_set_signal_text_cb, gpointer user_data,
-    buffer_t *buffer, uint32_t offset, uint32_t parent_offset, int indent, gboolean new_line);
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    stages {
+        stage ("gDashboard") {
+            steps {
+                script {     
+                    //retrieve MR data from gitlab and export to gSheet            
+                    sh returnStdout: true, script: 'python3 ci-scripts/ran_dashboard.py'
+                }                                  
+            }   
+        }
+    }
+}
 
-int enum_value_file_print(types_t *type, int indent, FILE *file);
 
-int enum_value_type_hr_display(types_t *type, int indent);
-
-#endif /* ENUM_VALUE_TYPE_H_ */

ci-scripts/Jenkinsfile-gitlab

@@ -30,14 +30,16 @@ def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
     }
 }
 
-def doFlexranCtrlTest = false
-
 // Location of the executor node
 def nodeExecutor = params.nodeExecutor
 
 // VM Lockable resources
 def vmResource = params.vmLockableResource
 
+// Tags to shorten pipeline duration
+def doMandatoryTests = false
+def doFullTestsuite = false
+
 pipeline {
     agent {
         label nodeExecutor
@@ -46,31 +48,6 @@ pipeline {
         disableConcurrentBuilds()
         timestamps()
         gitLabConnection('OAI GitLab')
-        gitlabBuilds(builds: [
-            "Build gNB-USRP",
-            "Build nr-UE-USRP",
-            "Build eNB-USRP",
-            "Build basic-sim",
-            "Build phy-sim",
-            "Build eNB-ethernet",
-            "Build UE-ethernet",
-            "Analysis with cppcheck",
-            "Test phy-sim",
-            "Test basic-sim",
-            "Test L1-sim",
-            "Test RF-sim",
-            "Test L2-sim",
-            "Test-Mono-FDD-Band7",
-            "Test-Mono-TDD-Band40",
-            "Test-IF4p5-FDD-Band7",
-            "Test-IF4p5-TDD-Band40",
-            "Test-Mono-FDD-Band13-LTE-M",
-            "Test-IF4p5-TDD-Band38-Multi-RRU",
-            "Test-eNB-OAI-UE-FDD-Band7",
-            "Test-Mono-FDD-Band13-X2-HO",
-            "Test-TDD-Band78-gNB-NR-UE",
-            "Test-OCP-FDD-Band7"
-        ])
         ansiColor('xterm')
     }
 
@@ -87,12 +64,36 @@ pipeline {
                         echo "Platform is ${env.TESTPLATFORM_OWNER}"
                     }
 
-                    if (params.FlexRanRtcGitLabRepository_Credentials != null) {
-                        doFlexranCtrlTest = true
-                    }
                     if (fileExists("flexran")) {
                         sh "rm -Rf flexran > /dev/null 2>&1"
                     }
+
+                    echo '\u2705 \u001B[32mVerify Labels\u001B[0m'
+                    if ("MERGE".equals(env.gitlabActionType)) {
+                        LABEL_CHECK = sh returnStdout: true, script: 'ci-scripts/checkGitLabMergeRequestLabels.sh --mr-id ' + env.gitlabMergeRequestIid
+                        LABEL_CHECK = LABEL_CHECK.trim()
+                        if (LABEL_CHECK == 'NONE') {
+                            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Your merge request has none of the mandatory labels:\n\n"
+                            message += " - BUILD-ONLY\n"
+                            message += " - 4G-LTE\n"
+                            message += " - 5G-NR\n"
+                            message += " - CI\n\n"
+                            message += "Not performing CI due to lack of labels"
+                            addGitLabMRComment comment: message
+                            error('Not performing CI due to lack of labels')
+                        } else if (LABEL_CHECK == 'FULL') {
+                            doMandatoryTests = true
+                            doFullTestsuite = true
+                        } else if (LABEL_CHECK == 'SHORTEN-5G') {
+                            doMandatoryTests = true
+                        } else {
+                            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): We will perform only build stages on your Merge Request"
+                            addGitLabMRComment comment: message
+                        }
+                    } else {
+                        doMandatoryTests = true
+                        doFullTestsuite = true
+                    }
                 }
             }
         }
@@ -135,15 +136,13 @@ pipeline {
                         // For the moment, there is no fail criteria. Just a notification of number of files that do not follow
                         sh "./ci-scripts/checkCodingFormattingRules.sh"
                     }
-                    if (doFlexranCtrlTest) {
+                    // With Mosaic 5G being part of OSA and making all it's repositories public
+                    // No need to pass credentials to clone flexran-rtc
+                    if (doMandatoryTests) {
                         sh "mkdir flexran"
                         dir ('flexran') {
-                            withCredentials([
-                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.FlexRanRtcGitLabRepository_Credentials}", usernameVariable: 'git_username', passwordVariable: 'git_password']
-                                ]) {
-                                sh "git clone https://${git_username}:${git_password}@gitlab.eurecom.fr/flexran/flexran-rtc.git . > ../git_clone.log 2>&1"
-                                sh "git checkout develop >> ../git_clone.log 2>&1"
-                            }
+                            sh "git clone https://gitlab.eurecom.fr/flexran/flexran-rtc.git . > ../git_clone.log 2>&1"
+                            sh "git checkout develop >> ../git_clone.log 2>&1"
                             sh "zip -r -qq flexran.zip ."
                         }
                     }
@@ -190,26 +189,6 @@ pipeline {
             }
         }
 
-        stage ("Start VM -- enb-usrp") {
-            steps {
-              lock (vmResource) {
-                timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
-                }
-              }
-            }
-        }
-
-        stage ("Start VM -- phy-sim") {
-            steps {
-              lock (vmResource) {
-                timeout (time: 5, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
-                }
-              }
-            }
-        }
-        
         stage ("Start VM -- enb-ethernet") {
             steps {
               lock (vmResource) {
@@ -228,33 +207,14 @@ pipeline {
                 }
               }
             }
-        }
+   }
         
-        stage ("Start VM -- cppcheck") {
-            steps {
-              lock (vmResource) {
-                timeout (time: 7, unit: 'MINUTES') {
-                    sh "./ci-scripts/oai-ci-vm-tool build --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID} --daemon"
-                }
-              }
-            }
-        }
-
         stage ("Variant Builds") {
             parallel {
-                stage ("Analysis with cppcheck") {
-                    steps {
-                        gitlabCommitStatus(name: "Analysis with cppcheck") {
-                            timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
-                            }
-                        }
-                    }
-                }
                 stage ("Build basic simulator") {
                     steps {
                         gitlabCommitStatus(name: "Build basic-sim") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 45, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -263,7 +223,7 @@ pipeline {
                 stage ("Build 5G gNB-USRP") {
                     steps {
                         gitlabCommitStatus(name: "Build gNB-USRP") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 45, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant gnb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -272,34 +232,16 @@ pipeline {
                 stage ("Build 5G NR-UE-USRP") {
                     steps {
                         gitlabCommitStatus(name: "Build nr-UE-USRP") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 45, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant nr-ue-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
                     }
                 }
-                stage ("Build eNB-USRP") {
-                    steps {
-                        gitlabCommitStatus(name: "Build eNB-USRP") {
-                            timeout (time: 20, unit: 'MINUTES') {
-                                sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
-                            }
-                        }
-                    }
-                }
-                stage ("Build physical simulators") {
-                    steps {
-                        gitlabCommitStatus(name: "Build phy-sim") {
-                            timeout (time: 20, unit: 'MINUTES') {
-                               sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
-                            }
-                        }
-                    }
-                }
                 stage ("Build eNB-ethernet") {
                     steps {
                         gitlabCommitStatus(name: "Build eNB-ethernet") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 45, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant enb-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -310,7 +252,7 @@ pipeline {
                       // This is typically the last one to finish.
                       lock (vmResource) {
                         gitlabCommitStatus(name: "Build UE-ethernet") {
-                            timeout (time: 20, unit: 'MINUTES') {
+                            timeout (time: 45, unit: 'MINUTES') {
                                 sh "./ci-scripts/oai-ci-vm-tool wait --workspace $WORKSPACE --variant ue-ethernet --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
                             }
                         }
@@ -328,9 +270,9 @@ pipeline {
                     script {
                         dir ('archives') {
                             if (fileExists('red_hat')) {
-                                sh "zip -r -qq vm_build_logs.zip basic_sim enb_usrp phy_sim cppcheck enb_eth ue_eth gnb_usrp nr_ue_usrp red_hat"
+                                sh "zip -r -qq vm_build_logs.zip basic_sim enb_eth ue_eth gnb_usrp nr_ue_usrp red_hat"
                             } else {
-                                sh "zip -r -qq vm_build_logs.zip basic_sim enb_usrp phy_sim cppcheck enb_eth ue_eth gnb_usrp nr_ue_usrp"
+                                sh "zip -r -qq vm_build_logs.zip basic_sim enb_eth ue_eth gnb_usrp nr_ue_usrp"
                             }
                         }
                         if(fileExists('archives/vm_build_logs.zip')) {
@@ -338,16 +280,6 @@ pipeline {
                         }
                         if ("MERGE".equals(env.gitlabActionType)) {
                             sh "./ci-scripts/oai-ci-vm-tool report-build --workspace $WORKSPACE --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger merge-request --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
-                            // If the merge request has introduced more CPPCHECK errors or warnings, notifications in GitLab
-                            if (fileExists('oai_cppcheck_added_errors.txt')) {
-                                def ret=readFile('./oai_cppcheck_added_errors.txt').trim();
-                                if ("0".equals(ret)) {
-                                    echo "No added cppcheck warnings/errors in this merge request"
-                                } else {
-                                    def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Some modified files in Merge Request MAY have INTRODUCED up to " + ret + " CPPCHECK errors/warnings"
-                                    addGitLabMRComment comment: message
-                                }
-                            }
                             // If the merge request has introduced compilation warnings, notifications in GitLab
                             sh "./ci-scripts/checkAddedWarnings.sh --src-branch ${env.gitlabSourceBranch} --target-branch ${env.gitlabTargetBranch}"
                             def res=readFile('./oai_warning_files.txt').trim();
@@ -374,26 +306,9 @@ pipeline {
             parallel {
                 stage ("VM-based tests") {
                     stages {
-                        stage ("Test physical simulators") {
-                            steps {
-                              lock (vmResource) {
-                                script {
-                                    timeout (time: 90, unit: 'MINUTES') {
-                                        try {
-                                            gitlabCommitStatus(name: "Test phy-sim") {
-                                                sh "./ci-scripts/oai-ci-vm-tool test --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
-                                            }
-                                        } catch (Exception e) {
-                                          currentBuild.result = 'FAILURE'
-                                        }
-                                    }
-                                }
-                              }
-                            }
-                        }
                         stage ("Build Flexran Controller") {
                             when {
-                                expression {doFlexranCtrlTest}
+                                expression {doMandatoryTests}
                             }
                             steps {
                               lock (vmResource) {
@@ -410,6 +325,9 @@ pipeline {
                             }
                         }
                         stage ("Test basic simulator") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
                               lock (vmResource) {
                                 script {
@@ -427,6 +345,9 @@ pipeline {
                             }
                         }
                         stage ("Test L1 simulator") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
                               lock (vmResource) {
                                 script {
@@ -444,6 +365,9 @@ pipeline {
                             }
                         }
                         stage ("Test RF simulator") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
                               lock (vmResource) {
                                 script {
@@ -460,7 +384,30 @@ pipeline {
                               }
                             }
                         }
+                        stage ("Test 5G RF simulator") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
+                            steps {
+                              lock (vmResource) {
+                                script {
+                                    timeout (time: 40, unit: 'MINUTES') {
+                                        try {
+                                            gitlabCommitStatus(name: "Test 5G RF-sim") {
+                                                sh "./ci-scripts/oai-ci-vm-tool test --workspace $WORKSPACE --variant rf5g-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
+                                            }
+                                        } catch (Exception e) {
+                                            currentBuild.result = 'FAILURE'
+                                        }
+                                    }
+                                }
+                              }
+                            }
+                        }
                         stage ("Test L2 simulator") {
+                            when {
+                                expression {doFullTestsuite}
+                            }
                             steps {
                               lock (vmResource) {
                                 script {
@@ -478,6 +425,9 @@ pipeline {
                             }
                         }
                         stage ("Destroy all Virtual Machines") {
+                            when {
+                                expression {doMandatoryTests}
+                            }
                             steps {
                               lock (vmResource) {
                                 sh "./ci-scripts/oai-ci-vm-tool destroy --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
@@ -487,6 +437,9 @@ pipeline {
                     }
                 }
                 stage ("Test MONOLITHIC - FDD - Band 7 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('eNB-CI-FDD-Band7-B210', 'Test-Mono-FDD-Band7')
@@ -506,6 +459,9 @@ pipeline {
                     }
                 }
                 stage ("Test MONOLITHIC - TDD - Band 40 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('eNB-CI-TDD-Band40-B210', 'Test-Mono-TDD-Band40')
@@ -525,6 +481,9 @@ pipeline {
                     }
                 }
                 stage ("Test IF4p5 - FDD - Band 7 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -545,6 +504,9 @@ pipeline {
                     }
                 }
                 stage ("Test IF4p5 - TDD - Band 40 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -565,6 +527,9 @@ pipeline {
                     }
                 }
                 stage ("Test MONOLITHIC - FDD - Band 13 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -585,6 +550,9 @@ pipeline {
                     }
                 }
                 stage ("Test X2 Handover - FDD - Band 13 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             sh "sleep 60"
@@ -605,6 +573,9 @@ pipeline {
                     }
                 }
                 stage ("Test IF4p5 - TDD - Band 38 - B210 - MultiRRU") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('eNB-CI-IF4p5-TDD-Band38-MultiRRU-B210', 'Test-IF4p5-TDD-Band38-Multi-RRU')
@@ -624,6 +595,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI UE - FDD - Band 20 - B200") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJobNoGitLab ('UE-CI-FDD-Band20-B200')
@@ -643,6 +617,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI UE - OAI eNB - FDD - Band 7 - B200") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             // Delayed trigger on slave job, so it is always the last one to run
@@ -664,6 +641,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI NR UE - OAI gNB - TDD - Band 78 - N300") {
+                    when {
+                        expression {doMandatoryTests}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('gNB-nrUE-MONO-TDD-Band78-N300', 'Test-TDD-Band78-gNB-NR-UE')
@@ -683,6 +663,9 @@ pipeline {
                     }
                 }
                 stage ("Test OAI OCP-eNB - FDD - Band 7 - B210") {
+                    when {
+                        expression {doFullTestsuite}
+                    }
                     steps {
                         script {
                             triggerSlaveJob ('OCPeNB-FDD-Band7-B210', 'Test-OCP-FDD-Band7')
@@ -705,8 +688,9 @@ pipeline {
             post {
                 always {
                     script {
+                      if (doMandatoryTests) {
                         dir ('archives') {
-                            sh "if [ -d basic_sim/test ] || [ -d phy_sim/test ] || [ -d l2_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
+                            sh "if [ -d basic_sim/test ] || [ -d rf_sim/test ] || [ -d l2_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
                         }
                         if(fileExists('archives/vm_tests_logs.zip')) {
                             archiveArtifacts artifacts: 'archives/vm_tests_logs.zip'
@@ -720,6 +704,7 @@ pipeline {
                                 archiveArtifacts artifacts: 'test_simulator_results.html'
                             }
                         }
+                      }
                     }
                 }
             }

ci-scripts/Jenkinsfile-physim-deploy

@@ -0,0 +1,233 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Location of the executor node
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the resource
+def ciEpcResource = params.epcResource
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess = false
+def eNB_TargetBranch
+
+// Flags
+def scmEvent = false
+def upstreamEvent = false
+
+//-------------------------------------------------------------------------------
+// Pipeline start
+pipeline {
+  agent {
+    label pythonExecutor
+  }
+  options {
+    disableConcurrentBuilds()
+    timestamps()
+    ansiColor('xterm')
+    lock(ciEpcResource)
+  }
+
+  stages {
+    stage ('Verify Parameters') {
+      steps {
+        script {
+          echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+
+          JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"'
+          JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
+
+          def allParametersPresent = true
+
+          // It is already to late to check it
+          if (params.pythonExecutor != null) {
+            echo "eNB CI executor node  :   ${pythonExecutor}"
+          }
+          // If not present picking a default Stage Name
+          if (params.pipelineTestStageName == null) {
+            // picking default
+            testStageName = 'Template Test Stage'
+          }
+
+          if (params.smartphonesResource == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB_IPAddress == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB_SourceCodePath == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB_Credentials == null) {
+            allParametersPresent = false
+          }
+          // the following 4 parameters should be pushed by the master trigger
+          // if not present, take the job GIT variables (used for developing)
+          if (params.eNB_Repository == null) {
+            eNB_Repository = env.GIT_URL
+          } else {
+            eNB_Repository = params.eNB_Repository
+          }
+          echo "eNB_Repository        :   ${eNB_Repository}"
+          if (params.eNB_Branch == null) {
+            eNB_Branch = env.GIT_BRANCH
+          } else {
+            eNB_Branch = params.eNB_Branch
+          }
+          echo "eNB_Branch            :   ${eNB_Branch}"
+          if (params.eNB_CommitID == null) {
+            eNB_CommitID = env.GIT_COMMIT
+          } else {
+            eNB_CommitID = params.eNB_CommitID
+          }
+          echo "eNB_CommitID          :   ${eNB_CommitID}"
+          if (params.eNB_mergeRequest != null) {
+            eNB_AllowMergeRequestProcess = params.eNB_mergeRequest
+            if (eNB_AllowMergeRequestProcess) {
+              if (params.eNB_TargetBranch != null) {
+                eNB_TargetBranch = params.eNB_TargetBranch
+              } else {
+                eNB_TargetBranch = 'develop'
+              }
+              echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+            }
+          }
+
+          if (params.EPC_IPAddress == null) {
+            allParametersPresent = false
+          }
+          if (params.EPC_Type == null) {
+            allParametersPresent = false
+          }
+          if (params.EPC_SourceCodePath == null) {
+            allParametersPresent = false
+          }
+          if (params.EPC_Credentials == null) {
+            allParametersPresent = false
+          }
+
+          if (params.ADB_IPAddress == null) {
+            allParametersPresent = false
+          }
+          if (params.ADB_Credentials == null) {
+            allParametersPresent = false
+          }
+          if (params.OC_Credentials == null) {
+            allParametersPresent = false
+          }
+          if (params.OC_ProjectName == null) {
+            allParametersPresent = false
+          }
+          if (allParametersPresent) {
+            echo "All parameters are present"
+            if (eNB_AllowMergeRequestProcess) {
+              sh "git fetch"
+              sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+            } else {
+              sh "git fetch"
+              sh "git checkout -f ${eNB_CommitID}"
+            }
+          } else {
+            echo "Some parameters are missing"
+            sh "./ci-scripts/fail.sh"
+          }
+        }
+      }
+    }
+
+    stage ("Deploy and Test") {
+      steps {
+        script {
+          dir ('ci-scripts') {
+            echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+            // If not present picking a default XML file
+            if (params.pythonTestXmlFile == null) {
+              // picking default
+              testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+              echo "Test XML file(default):   ${testXMLFile}"
+              mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+            } else {
+              String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+              for (xmlFile in myXmlTestSuite) {
+                if (fileExists(xmlFile)) {
+                  mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                  echo "Test XML file         :   ${xmlFile}"
+                }
+              }
+            }
+            withCredentials([
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password'],
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.OC_Credentials}", usernameVariable: 'OC_Username', passwordVariable: 'OC_Password']
+            ]) {
+              sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+              String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+              for (xmlFile in myXmlTestSuite) {
+                if (fileExists(xmlFile)) {
+                  try {
+                    sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile} --OCUserName=${OC_Username} --OCPassword=${OC_Password} --OCProjectName=${OC_ProjectName}"
+                  } catch (Exception e) {
+                    currentBuild.result = 'FAILURE'
+                    buildStageStatus = false
+                  }
+                }
+              }
+              sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+            }
+          }
+        } 
+      }
+    }
+    stage ("Log Collection") {
+      steps {
+        script {
+          dir ('ci-scripts') {
+            // Zipping all archived log files
+            sh "zip -r -qq physim_deploytest_logs_${env.BUILD_ID}.zip physim_test_logs_*/*"
+            sh "rm -rf physim_test_logs_*/"
+            if (fileExists("physim_deploytest_logs_${env.BUILD_ID}.zip")) {
+              archiveArtifacts artifacts: "physim_deploytest_logs_${env.BUILD_ID}.zip"
+            }
+            if (fileExists("test_results.html")) {
+              sh "mv test_results.html test_results-${env.JOB_NAME}.html"
+              sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+              archiveArtifacts artifacts: "test_results-${env.JOB_NAME}.html"
+            }
+          }
+        }
+      }
+    }
+  }  
+}  

ci-scripts/Jenkinsfile-tmp-multi-enb-benetel

@@ -0,0 +1,293 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the phone resource
+def ciSmartPhonesResource1 = params.SmartPhonesResource1
+def ciSmartPhonesResource2 = params.SmartPhonesResource2
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess
+def eNB_TargetBranch
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    options {
+        disableConcurrentBuilds()
+        ansiColor('xterm')
+        lock(extra: [[resource: ciSmartPhonesResource2]], resource: ciSmartPhonesResource1)
+    }
+    stages {
+        stage("Build Init") {
+            steps {
+                // update the build name and description
+                buildName "${params.eNB_MR}"
+                buildDescription "Branch : ${params.eNB_Branch}"
+            }
+        }
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    // It is already to late to check it
+                    if (params.pythonExecutor != null) {
+                        echo "eNB CI executor node  :   ${pythonExecutor}"
+                    }
+                    // If not present picking a default Stage Name
+                    if (params.pipelineTestStageName == null) {
+                        // picking default
+                        testStageName = 'Template Test Stage'
+                    }
+
+                    if (params.SmartPhonesResource1 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource2 == null) {
+                        allParametersPresent = false
+                    }
+                    // 1st eNB parameters
+                    if (params.eNB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 2nd eNB parameters
+                    if (params.eNB1_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 3rd eNB parameters
+                    if (params.eNB2_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // the following 4 parameters should be pushed by the master trigger
+                    // if not present, take the job GIT variables (used for developing)
+                    if (params.eNB_Repository == null) {
+                        eNB_Repository = env.GIT_URL
+                    } else {
+                        eNB_Repository = params.eNB_Repository
+                    }
+                    echo "eNB_Repository        :   ${eNB_Repository}"
+                    if (params.eNB_Branch == null) {
+                        eNB_Branch = env.GIT_BRANCH
+                    } else {
+                        eNB_Branch = params.eNB_Branch
+                    }
+                    echo "eNB_Branch            :   ${eNB_Branch}"
+                    if (params.eNB_CommitID == null) {
+                        eNB_CommitID = env.GIT_COMMIT
+                    } else {
+                        eNB_CommitID = params.eNB_CommitID
+                    }
+                    echo "eNB_CommitID          :   ${eNB_CommitID}"
+                    if (params.eNB_AllowMergeRequestProcess!= null) {
+                        eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
+                        if (eNB_AllowMergeRequestProcess) {
+                            if (params.eNB_TargetBranch != null) {
+                                eNB_TargetBranch = params.eNB_TargetBranch
+                            } else {
+                                eNB_TargetBranch = 'develop'
+                            }
+                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+                        }
+                    }
+
+                    if (params.EPC_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Type == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (params.ADB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.ADB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (allParametersPresent) {
+                        echo "All parameters are present"
+                        if (eNB_AllowMergeRequestProcess) {
+                            sh "git fetch"
+                            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+                        } else {
+                            sh "git fetch"
+                            sh "git checkout -f ${eNB_CommitID}"
+                        }
+                    } else {
+                        echo "Some parameters are missing"
+                        sh "./ci-scripts/fail.sh"
+                    }
+                }
+            }
+        }
+        stage ("Build and Test") {
+            steps {
+                script {
+                    dir ('ci-scripts') {
+                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                        // If not present picking a default XML file
+                        if (params.pythonTestXmlFile == null) {
+                            // picking default
+                            testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                            echo "Test XML file(default):   ${testXMLFile}"
+                            mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+                        } else {
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                                    echo "Test XML file         :   ${xmlFile}"
+                                }
+                            }
+                        }
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    try {
+                                        sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                        buildStageStatus = false
+                                    }
+                                }
+                            }
+                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        }
+                    }
+                }
+            }
+        }
+        stage('Log Collection') {
+            parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (eNB - Run)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
+                            }
+                            if(fileExists("ci-scripts/test_results.html")) {
+                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+                                archiveArtifacts "test_results-${JOB_NAME}.html"
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    post {
+        always {
+            script {
+                if (params.pipelineZipsConsoleLog != null) {
+                    if (params.pipelineZipsConsoleLog) {
+                        echo "Archiving Jenkins console log"
+                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
+                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
+                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
+                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

ci-scripts/Jenkinsfile-tmp-multi-enb-benetel-long

@@ -0,0 +1,304 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the phone resource
+def ciSmartPhonesResource1 = params.SmartPhonesResource1
+def ciSmartPhonesResource2 = params.SmartPhonesResource2
+
+// Global Parameters. Populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository = "https://gitlab.eurecom.fr/oai/openairinterface5g.git"
+def eNB_Branch = "develop"
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess = false
+def eNB_TargetBranch = "develop"
+def eNB_MR = "develop"
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    options {
+        disableConcurrentBuilds()
+        ansiColor('xterm')
+        lock(extra: [[resource: ciSmartPhonesResource2]], resource: ciSmartPhonesResource1)
+    }
+    stages {
+        stage("Build Init") {
+            steps {
+                script {
+                    //retrieve latest commit ID from branch
+                    latest_commit_from_branch= sh returnStdout: true, script: 'git log -1 origin/${eNB_Branch} | grep commit'
+                    echo "Branch ${eNB_Branch}"
+                    echo "${latest_commit_from_branch}"
+                    tmp=latest_commit_from_branch.split()
+                    echo "${tmp}"
+                    eNB_CommitID = tmp[1]
+                    echo "eNB_CommitID ${eNB_CommitID}"
+                    // update the build name and description
+                    buildName "${params.eNB_MR}"
+                    buildDescription "Commit : ${eNB_CommitID}"
+                }
+            }
+        }
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    // It is already to late to check it
+                    if (params.pythonExecutor != null) {
+                        echo "eNB CI executor node  :   ${pythonExecutor}"
+                    }
+                    // If not present picking a default Stage Name
+                    if (params.pipelineTestStageName == null) {
+                        // picking default
+                        testStageName = 'Template Test Stage'
+                    }
+
+                    if (params.SmartPhonesResource1 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource2 == null) {
+                        allParametersPresent = false
+                    }
+                    // 1st eNB parameters
+                    if (params.eNB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 2nd eNB parameters
+                    if (params.eNB1_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 3rd eNB parameters
+                    if (params.eNB2_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // the following 4 parameters should be pushed by the master trigger
+                    // if not present, take the job GIT variables (used for developing)
+                    if (params.eNB_Repository == null) {
+                        eNB_Repository = env.GIT_URL
+                    } else {
+                        eNB_Repository = params.eNB_Repository
+                    }
+                    echo "eNB_Repository        :   ${eNB_Repository}"
+                    if (params.eNB_Branch == null) {
+                        eNB_Branch = env.GIT_BRANCH
+                    } else {
+                        eNB_Branch = params.eNB_Branch
+                    }
+                    echo "eNB_Branch            :   ${eNB_Branch}"
+                    //if (params.eNB_CommitID == null) {
+                    //    eNB_CommitID = env.GIT_COMMIT
+                    //} else {
+                    //    eNB_CommitID = params.eNB_CommitID
+                    //}
+                    echo "eNB_CommitID          :   ${eNB_CommitID}"
+                    if (params.eNB_AllowMergeRequestProcess!= null) {
+                        eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
+                        if (eNB_AllowMergeRequestProcess) {
+                            if (params.eNB_TargetBranch != null) {
+                                eNB_TargetBranch = params.eNB_TargetBranch
+                            } else {
+                                eNB_TargetBranch = 'develop'
+                            }
+                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+                        }
+                    }
+
+                    if (params.EPC_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Type == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (params.ADB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.ADB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (allParametersPresent) {
+                        echo "All parameters are present"
+                        if (eNB_AllowMergeRequestProcess) {
+                            sh "git fetch"
+                            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+                        } else {
+                            sh "git fetch"
+                            sh "git checkout -f ${eNB_CommitID}"
+                        }
+                    } else {
+                        echo "Some parameters are missing"
+                        sh "./ci-scripts/fail.sh"
+                    }
+                }
+            }
+        }
+        stage ("Build and Test") {
+            steps {
+                script {
+                    dir ('ci-scripts') {
+                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                        // If not present picking a default XML file
+                        if (params.pythonTestXmlFile == null) {
+                            // picking default
+                            testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                            echo "Test XML file(default):   ${testXMLFile}"
+                            mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+                        } else {
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                                    echo "Test XML file         :   ${xmlFile}"
+                                }
+                            }
+                        }
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    try {
+                                        sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                        buildStageStatus = false
+                                    }
+                                }
+                            }
+                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        }
+                    }
+                }
+            }
+        }
+        stage('Log Collection') {
+            parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (eNB - Run)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
+                            }
+                            if(fileExists("ci-scripts/test_results.html")) {
+                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+                                archiveArtifacts "test_results-${JOB_NAME}.html"
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    post {
+        always {
+            script {
+                if (params.pipelineZipsConsoleLog != null) {
+                    if (params.pipelineZipsConsoleLog) {
+                        echo "Archiving Jenkins console log"
+                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
+                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
+                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
+                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

ci-scripts/Jenkinsfile-tmp-multi-enb-nsa

@@ -0,0 +1,293 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the phone/server resource
+def ciSmartPhonesResource1 = params.SmartPhonesResource1
+def ciSmartPhonesResource2 = params.SmartPhonesResource2
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess
+def eNB_TargetBranch
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    options {
+        disableConcurrentBuilds()
+        ansiColor('xterm')
+        lock(extra: [[resource: ciSmartPhonesResource2]], resource: ciSmartPhonesResource1)
+    }
+    stages {
+        stage("Build Init") {
+            steps {
+                // update the build name and description
+                buildName "${params.eNB_MR}"
+                buildDescription "Branch : ${params.eNB_Branch}"
+            }
+        }
+        stage ("Verify Parameters") {
+            steps {
+                script {
+                    echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+                    def allParametersPresent = true
+
+                    // It is already to late to check it
+                    if (params.pythonExecutor != null) {
+                        echo "eNB CI executor node  :   ${pythonExecutor}"
+                    }
+                    // If not present picking a default Stage Name
+                    if (params.pipelineTestStageName == null) {
+                        // picking default
+                        testStageName = 'Template Test Stage'
+                    }
+
+                    if (params.SmartPhonesResource1 == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.SmartPhonesResource2 == null) {
+                        allParametersPresent = false
+                    }
+                    // 1st eNB parameters
+                    if (params.eNB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 2nd eNB parameters
+                    if (params.eNB1_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB1_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // 3rd eNB parameters
+                    if (params.eNB2_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.eNB2_Credentials == null) {
+                        allParametersPresent = false
+                    }
+                    // the following 4 parameters should be pushed by the master trigger
+                    // if not present, take the job GIT variables (used for developing)
+                    if (params.eNB_Repository == null) {
+                        eNB_Repository = env.GIT_URL
+                    } else {
+                        eNB_Repository = params.eNB_Repository
+                    }
+                    echo "eNB_Repository        :   ${eNB_Repository}"
+                    if (params.eNB_Branch == null) {
+                        eNB_Branch = env.GIT_BRANCH
+                    } else {
+                        eNB_Branch = params.eNB_Branch
+                    }
+                    echo "eNB_Branch            :   ${eNB_Branch}"
+                    if (params.eNB_CommitID == null) {
+                        eNB_CommitID = env.GIT_COMMIT
+                    } else {
+                        eNB_CommitID = params.eNB_CommitID
+                    }
+                    echo "eNB_CommitID          :   ${eNB_CommitID}"
+                    if (params.eNB_AllowMergeRequestProcess!= null) {
+                        eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
+                        if (eNB_AllowMergeRequestProcess) {
+                            if (params.eNB_TargetBranch != null) {
+                                eNB_TargetBranch = params.eNB_TargetBranch
+                            } else {
+                                eNB_TargetBranch = 'develop'
+                            }
+                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+                        }
+                    }
+
+                    if (params.EPC_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Type == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_SourceCodePath == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.EPC_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (params.ADB_IPAddress == null) {
+                        allParametersPresent = false
+                    }
+                    if (params.ADB_Credentials == null) {
+                        allParametersPresent = false
+                    }
+
+                    if (allParametersPresent) {
+                        echo "All parameters are present"
+                        if (eNB_AllowMergeRequestProcess) {
+                            sh "git fetch"
+                            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+                        } else {
+                            sh "git fetch"
+                            sh "git checkout -f ${eNB_CommitID}"
+                        }
+                    } else {
+                        echo "Some parameters are missing"
+                        sh "./ci-scripts/fail.sh"
+                    }
+                }
+            }
+        }
+        stage ("Build and Test") {
+            steps {
+                script {
+                    dir ('ci-scripts') {
+                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                        // If not present picking a default XML file
+                        if (params.pythonTestXmlFile == null) {
+                            // picking default
+                            testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                            echo "Test XML file(default):   ${testXMLFile}"
+                            mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+                        } else {
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                                    echo "Test XML file         :   ${xmlFile}"
+                                }
+                            }
+                        }
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                if (fileExists(xmlFile)) {
+                                    try {
+                                        sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
+                                    } catch (Exception e) {
+                                        currentBuild.result = 'FAILURE'
+                                        buildStageStatus = false
+                                    }
+                                }
+                            }
+                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+                        }
+                    }
+                }
+            }
+        }
+        stage('Log Collection') {
+            parallel {
+                stage('Log Collection (eNB - Build)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("build.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "build.log.${env.BUILD_ID}.zip"
+                            }
+                        }
+                    }
+                }
+                stage('Log Collection (eNB - Run)') {
+                    steps {
+                        withCredentials([
+                             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
+                        ]) {
+                            echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+
+                            echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
+                            sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
+                        }
+                        script {
+                            if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
+                                archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
+                            }
+                            if(fileExists("ci-scripts/test_results.html")) {
+                                sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+                                archiveArtifacts "test_results-${JOB_NAME}.html"
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    post {
+        always {
+            script {
+                if (params.pipelineZipsConsoleLog != null) {
+                    if (params.pipelineZipsConsoleLog) {
+                        echo "Archiving Jenkins console log"
+                        sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
+                        sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
+                        if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
+                            archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

ci-scripts/Jenkinsfile-tmp-ran

@@ -241,6 +241,10 @@ pipeline {
         stage ("Terminate") {
             parallel {
                 stage('Terminate UE') {
+                    // Bypassing this stage if there are no abd server defined
+                    when {
+                      expression { params.ADB_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate UE\u001B[0m'
                         withCredentials([
@@ -275,6 +279,10 @@ pipeline {
                     }
                 }
                 stage('Terminate SPGW') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate SPGW\u001B[0m'
                         withCredentials([
@@ -292,6 +300,10 @@ pipeline {
                     }
                 }
                 stage('Terminate MME') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate MME\u001B[0m'
                         withCredentials([
@@ -309,6 +321,10 @@ pipeline {
                     }
                 }
                 stage('Terminate HSS') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         echo '\u2705 \u001B[32mTerminate HSS\u001B[0m'
                         withCredentials([
@@ -353,7 +369,7 @@ pipeline {
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
                         ]) {
                             echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
-                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
+                            sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --BuildId=${env.BUILD_ID}"
 
                             echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
                             sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
@@ -371,6 +387,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (SPGW)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -389,6 +409,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (MME)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -407,6 +431,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (HSS)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -425,6 +453,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (Ping)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -443,6 +475,10 @@ pipeline {
                     }
                 }
                 stage('Log Collection (Iperf)') {
+                    // Bypassing this stage if EPC server is not defined
+                    when {
+                      expression { params.EPC_IPAddress != "none" }
+                    }
                     steps {
                         withCredentials([
                              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
@@ -482,7 +518,7 @@ pipeline {
         // Making sure that we really shutdown every thing before leaving
         failure {
             script {
-                if (!termStatusArray[termUE]) {
+                if ((!termStatusArray[termUE]) && (params.ADB_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
                     ]) {
@@ -496,21 +532,21 @@ pipeline {
                         sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
                     }
                 }
-                if (!termStatusArray[termSPGW]) {
+                if ((!termStatusArray[termSPGW]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {
                         sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
                     }
                 }
-                if (!termStatusArray[termMME]) {
+                if ((!termStatusArray[termMME]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {
                         sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
                     }
                 }
-                if (!termStatusArray[termHSS]) {
+                if ((!termStatusArray[termHSS]) && (params.EPC_IPAddress != "none")) {
                     withCredentials([
                         [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
                     ]) {

ci-scripts/Jenkinsfile-trig-nsa

@@ -0,0 +1,82 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
+
+// Location of the python executor node shall be in the same subnet as the others servers
+def pythonExecutor = params.pythonExecutor
+
+def TARGET_BRANCH = "develop"
+def ALLOW_MERGE = true
+
+pipeline {
+    agent {
+        label pythonExecutor
+    }
+    stages {
+        stage ("Launcher") {
+            steps {
+                script {     
+                    //retrieve MR that are opened nd with tag NSA             
+                    MR_LIST= sh returnStdout: true, script: 'curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests?state=opened&per_page=100&labels=NSA" | jq ".[].iid" || true '
+                    echo "List of selected MR:\n${MR_LIST}" 
+                    def MR_ARRAY = MR_LIST.split('\n') 
+                    //for every selected MR, retrieve the branch name and the latest commit              
+                    for (MR in MR_ARRAY) {
+                        SRC_BRANCH=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".source_branch" || true """
+                        SRC_BRANCH=SRC_BRANCH.trim()
+                        COMMIT_ID=sh returnStdout: true, script:  """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".sha" || true """
+                        COMMIT_ID=COMMIT_ID.trim()
+                        echo "Testing NSA on : ${MR} ${SRC_BRANCH} ${COMMIT_ID}"
+                        //calling NSA sub job
+                        build job: "RAN-NSA-Mini-Module", wait : true, propagate : false, parameters: [
+                            string(name: 'eNB_MR', value: String.valueOf(MR)),                          
+                            string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
+                            string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
+                            string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
+                            booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
+                        ]
+                        //calling NSA long sub job
+//                        build job: "RAN-NSA-Mini-Module-Long", wait : true, propagate : false, parameters: [
+//                            string(name: 'eNB_MR', value: String.valueOf(MR)),
+//                            string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
+//                            string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
+//                            string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
+//                            booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
+//                        ]
+                        //calling NSA attach/detach job
+//                        build job: "RAN-NSA-Mini-Module-Attach-Detach", wait : true, propagate : false, parameters: [
+//                            string(name: 'eNB_MR', value: String.valueOf(MR)),
+//                            string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
+//                            string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
+//                            string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
+//                            booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
+//                        ]
+
+                    }
+                }                                  
+            }   
+        }
+    }
+}
+
+

ci-scripts/args_parse.py

@@ -41,7 +41,7 @@ import constants as CONST
 #-----------------------------------------------------------
 
 
-def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
+def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA,PHYSIM):
 
 
     py_param_file_present = False
@@ -79,6 +79,9 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranRepository=matchReg.group(1)
             HTML.ranRepository=matchReg.group(1)
             ldpc.ranRepository=matchReg.group(1)
+            CONTAINERS.ranRepository=matchReg.group(1)
+            SCA.ranRepository=matchReg.group(1)
+            PHYSIM.ranRepository=matchReg.group(1)
         elif re.match('^\-\-eNB_AllowMerge=(.+)$|^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE)
@@ -90,6 +93,9 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
                 CiTestObj.ranAllowMerge = True
                 RAN.ranAllowMerge=True
                 HTML.ranAllowMerge=True
+                CONTAINERS.ranAllowMerge=True
+                SCA.ranAllowMerge=True
+                PHYSIM.ranAllowMerge=True
         elif re.match('^\-\-eNBBranch=(.+)$|^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE)
@@ -99,6 +105,9 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranBranch=matchReg.group(1)
             HTML.ranBranch=matchReg.group(1)
             ldpc.ranBranch=matchReg.group(1)
+            CONTAINERS.ranBranch=matchReg.group(1)
+            SCA.ranBranch=matchReg.group(1)
+            PHYSIM.ranBranch=matchReg.group(1)
         elif re.match('^\-\-eNBCommitID=(.*)$|^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE)
@@ -108,6 +117,9 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranCommitID=matchReg.group(1)
             HTML.ranCommitID=matchReg.group(1)
             ldpc.ranCommitID=matchReg.group(1)
+            CONTAINERS.ranCommitID=matchReg.group(1)
+            SCA.ranCommitID=matchReg.group(1)
+            PHYSIM.ranCommitID=matchReg.group(1)
         elif re.match('^\-\-eNBTargetBranch=(.*)$|^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE)
@@ -117,50 +129,73 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             RAN.ranTargetBranch=matchReg.group(1)
             HTML.ranTargetBranch=matchReg.group(1)
             ldpc.ranTargetBranch=matchReg.group(1)
+            CONTAINERS.ranTargetBranch=matchReg.group(1)
+            SCA.ranTargetBranch=matchReg.group(1)
+            PHYSIM.ranTargetBranch=matchReg.group(1)
         elif re.match('^\-\-eNBIPAddress=(.+)$|^\-\-eNB[1-2]IPAddress=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBIPAddress=matchReg.group(1)
                 ldpc.eNBIpAddr=matchReg.group(1)
+                CONTAINERS.eNBIPAddress=matchReg.group(1)
+                SCA.eNBIPAddress=matchReg.group(1)
+                PHYSIM.eNBIPAddress=matchReg.group(1)
             elif re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1IPAddress=matchReg.group(1)
+                CONTAINERS.eNB1IPAddress=matchReg.group(1)
             elif re.match('^\-\-eNB2IPAddress=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2IPAddress=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2IPAddress=matchReg.group(1)
+                CONTAINERS.eNB2IPAddress=matchReg.group(1)
         elif re.match('^\-\-eNBUserName=(.+)$|^\-\-eNB[1-2]UserName=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBUserName=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBUserName=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBUserName=matchReg.group(1)
                 ldpc.eNBUserName=matchReg.group(1)
+                CONTAINERS.eNBUserName=matchReg.group(1)
+                SCA.eNBUserName=matchReg.group(1)
+                PHYSIM.eNBUserName=matchReg.group(1)
             elif re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1UserName=matchReg.group(1)
+                CONTAINERS.eNB1UserName=matchReg.group(1)
             elif re.match('^\-\-eNB2UserName=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2UserName=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2UserName=matchReg.group(1)
+                CONTAINERS.eNB2UserName=matchReg.group(1)
         elif re.match('^\-\-eNBPassword=(.+)$|^\-\-eNB[1-2]Password=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBPassword=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBPassword=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBPassword=matchReg.group(1)
                 ldpc.eNBPassWord=matchReg.group(1)
+                CONTAINERS.eNBPassword=matchReg.group(1)
+                SCA.eNBPassword=matchReg.group(1)
+                PHYSIM.eNBPassword=matchReg.group(1)
             elif re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1Password=matchReg.group(1)
+                CONTAINERS.eNB1Password=matchReg.group(1)
             elif re.match('^\-\-eNB2Password=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2Password=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2Password=matchReg.group(1)
+                CONTAINERS.eNB2Password=matchReg.group(1)
         elif re.match('^\-\-eNBSourceCodePath=(.+)$|^\-\-eNB[1-2]SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
             if re.match('^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBSourceCodePath=matchReg.group(1)
                 ldpc.eNBSourceCodePath=matchReg.group(1)
+                CONTAINERS.eNBSourceCodePath=matchReg.group(1)
+                SCA.eNBSourceCodePath=matchReg.group(1)
+                PHYSIM.eNBSourceCodePath=matchReg.group(1)
             elif re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1SourceCodePath=matchReg.group(1)
+                CONTAINERS.eNB1SourceCodePath=matchReg.group(1)
             elif re.match('^\-\-eNB2SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB2SourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB2SourceCodePath=matchReg.group(1)
+                CONTAINERS.eNB2SourceCodePath=matchReg.group(1)
         elif re.match('^\-\-EPCIPAddress=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-EPCIPAddress=(.+)$', myArgv, re.IGNORECASE)
             EPC.IPAddress=matchReg.group(1)
@@ -222,6 +257,18 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,HELP):
             finalStatus = matchReg.group(1)
             if ((finalStatus == 'true') or (finalStatus == 'True')):
                 CiTestObj.finalStatus = True
+        elif re.match('^\-\-OCUserName=(.+)$', myArgv, re.IGNORECASE):
+            matchReg = re.match('^\-\-OCUserName=(.+)$', myArgv, re.IGNORECASE)
+            PHYSIM.OCUserName = matchReg.group(1)
+        elif re.match('^\-\-OCPassword=(.+)$', myArgv, re.IGNORECASE):
+            matchReg = re.match('^\-\-OCPassword=(.+)$', myArgv, re.IGNORECASE)
+            PHYSIM.OCPassword = matchReg.group(1)
+        elif re.match('^\-\-OCProjectName=(.+)$', myArgv, re.IGNORECASE):
+            matchReg = re.match('^\-\-OCProjectName=(.+)$', myArgv, re.IGNORECASE)
+            PHYSIM.OCProjectName = matchReg.group(1)
+        elif re.match('^\-\-BuildId=(.+)$', myArgv, re.IGNORECASE):
+            matchReg = re.match('^\-\-BuildId=(.+)$', myArgv, re.IGNORECASE)
+            RAN.BuildId = matchReg.group(1)
         else:
             HELP.GenericHelp(CONST.Version)
             sys.exit('Invalid Parameter: ' + myArgv)

ci-scripts/auto_start_gnb.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+while true
+do
+  echo "gNB will be started automatically..."
+  sleep 1
+  sudo .././cmake_targets/ran_build/build/nr-softmodem -E -O ../targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb.conf
+done

ci-scripts/buildOnRH.sh

@@ -1,216 +0,0 @@
-#!/bin/bash
-#/*
-# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
-# * contributor license agreements.  See the NOTICE file distributed with
-# * this work for additional information regarding copyright ownership.
-# * The OpenAirInterface Software Alliance licenses this file to You under
-# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
-# * except in compliance with the License.
-# * You may obtain a copy of the License at
-# *
-# *      http://www.openairinterface.org/?page_id=698
-# *
-# * Unless required by applicable law or agreed to in writing, software
-# * distributed under the License is distributed on an "AS IS" BASIS,
-# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# * See the License for the specific language governing permissions and
-# * limitations under the License.
-# *-------------------------------------------------------------------------------
-# * For more information about the OpenAirInterface (OAI) Software Alliance:
-# *      contact@openairinterface.org
-# */
-
-function usage {
-    echo "OAI RedHat Build Check script"
-    echo "   Original Author: Raphael Defosseux"
-
-    echo ""
-    echo "Usage:"
-    echo "------"
-    echo "    buildOnRH.sh [OPTIONS]"
-    echo ""
-    echo "Options:"
-    echo "--------"
-    echo "    --job-name #### OR -jn ####"
-    echo "    Specify the name of the Jenkins job."
-    echo ""
-    echo "    --build-id #### OR -id ####"
-    echo "    Specify the build ID of the Jenkins job."
-    echo ""
-    echo "    --workspace #### OR -ws ####"
-    echo "    Specify the workspace."
-    echo ""
-    echo "    --remote-host #### OR -rh ####"
-    echo "    Specify the RedHat remote server."
-    echo ""
-    echo "    --remote-user-name #### OR -ru ####"
-    echo "    Specify the RedHat remote server username."
-    echo ""
-    echo "    --remote-password #### OR -rp ####"
-    echo "    Specify the RedHat remote server password."
-    echo ""
-    echo "    --remote-path #### OR -ra ####"
-    echo "    Specify the RedHat remote server path to work on."
-    echo ""
-}
-
-if [ $# -lt 1 ] || [ $# -gt 14 ]
-then
-    echo "Syntax Error: not the correct number of arguments"
-    echo ""
-    usage
-    exit 1
-fi
-
-RH_HOST=XX
-RH_USER=XX
-RH_PASSWD=XX
-RH_PATH=XX
-JOB_NAME=XX
-BUILD_ID=XX
-
-while [[ $# -gt 0 ]]
-do
-key="$1"
-
-case $key in
-    -h|--help)
-    shift
-    usage
-    exit 0
-    ;;
-    -jn|--job-name)
-    JOB_NAME="$2"
-    shift
-    shift
-    ;;
-    -id|--build-id)
-    BUILD_ID="$2"
-    shift
-    shift
-    ;;
-    -ws|--workspace)
-    JENKINS_WKSP="$2"
-    shift
-    shift
-    ;;
-    -rh|--remote-host)
-    RH_HOST="$2"
-    shift
-    shift
-    ;;
-    -ru|--remote-user-name)
-    RH_USER="$2"
-    shift
-    shift
-    ;;
-    -rp|--remote-password)
-    RH_PASSWD="$2"
-    shift
-    shift
-    ;;
-    -ra|--remote-path)
-    RH_PATH="$2"
-    shift
-    shift
-    ;;
-    *)
-    echo "Syntax Error: unknown option: $key"
-    echo ""
-    usage
-    exit 1
-esac
-done
-
-if [ ! -f $JENKINS_WKSP/localZip.zip ]
-then
-    echo "Missing localZip.zip file!"
-    exit 1
-fi
-
-if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ] || [ "$RH_HOST" == "XX" ] || [ "$RH_USER" == "XX" ] || [ "$RH_PASSWD" == "XX" ] || [ "$RH_PATH" == "XX" ]
-then
-    echo "Missing options"
-    usage
-    exit 1
-fi
-
-echo "############################################################"
-echo "Copying GIT repo into RedHat Server" 
-echo "############################################################"
-echo "rm -Rf ${RH_PATH}" >> rh-cmd.txt
-echo "mkdir -p ${RH_PATH}" >> rh-cmd.txt
-
-sshpass -p ${RH_PASSWD} ssh -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST} < rh-cmd.txt
-rm -f rh-cmd.txt
-
-echo "############################################################"
-echo "Running install and build script on RedHat Server"
-echo "############################################################"
-sshpass -p ${RH_PASSWD} scp -o 'StrictHostKeyChecking no' $JENKINS_WKSP/localZip.zip ${RH_USER}@${RH_HOST}:${RH_PATH}
-
-echo "cd ${RH_PATH}" > rh-cmd.txt
-echo "unzip -qq localZip.zip" >> rh-cmd.txt
-echo "source oaienv" >> rh-cmd.txt
-echo "cd cmake_targets" >> rh-cmd.txt
-echo "mkdir -p log" >> rh-cmd.txt
-echo "./build_oai -I -w USRP --eNB > log/install-build.txt 2>&1" >> rh-cmd.txt
-sshpass -p ${RH_PASSWD} ssh -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST} < rh-cmd.txt
-
-rm -f rh-cmd.txt
-
-echo "############################################################"
-echo "Creating a tmp folder to store results and artifacts"
-echo "############################################################"
-if [ ! -d $JENKINS_WKSP/archives ]
-then
-    mkdir -p $JENKINS_WKSP/archives
-fi
-
-ARCHIVES_LOC=$JENKINS_WKSP/archives/red_hat
-if [ ! -d $ARCHIVES_LOC ]
-then
-    mkdir -p $ARCHIVES_LOC
-fi
-
-sshpass -p ${RH_PASSWD} scp -o 'StrictHostKeyChecking no' ${RH_USER}@${RH_HOST}:${RH_PATH}/cmake_targets/log/*.txt $ARCHIVES_LOC
-
-echo "############################################################"
-echo "Checking build status" 
-echo "############################################################"
-
-LOG_PATTERN=.Rel15.txt
-NB_PATTERN_FILES=7
-
-LOG_FILES=`ls $ARCHIVES_LOC/*.txt`
-STATUS=0
-NB_FOUND_FILES=0
-
-for FULLFILE in $LOG_FILES
-do
-    if [[ $FULLFILE == *"$LOG_PATTERN"* ]]
-    then
-        filename=$(basename -- "$FULLFILE")
-        PASS_PATTERN=`echo $filename | sed -e "s#$LOG_PATTERN##"`
-        LOCAL_STAT=`egrep -c "Built target $PASS_PATTERN" $FULLFILE`
-        if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
-        NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
-    fi
-done
-
-if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]
-then
-    echo "Expecting $NB_PATTERN_FILES log files and found $NB_FOUND_FILES"
-    STATUS=-1
-fi
-
-echo "COMMAND: build_oai -I -w USRP --eNB" > $ARCHIVES_LOC/build_final_status.log
-if [ $STATUS -eq 0 ]
-then
-    echo "BUILD_OK" >> $ARCHIVES_LOC/build_final_status.log
-    echo "STATUS seems OK"
-else
-    echo "BUILD_KO" >> $ARCHIVES_LOC/build_final_status.log
-    echo "STATUS failed?"
-fi
-exit $STATUS

ci-scripts/buildOnVM.sh

@@ -62,6 +62,12 @@ function build_on_vm {
     echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
     echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
 
+    if [[ "$VM_NAME" == *"-enb-usrp"* ]] || [[ "$VM_NAME" == *"-cppcheck"* ]] || [[ "$VM_NAME" == *"-phy-sim"* ]]
+    then
+        echo "This VM type is no longer supported in the pipeline framework"
+        return
+    fi
+
     IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
 
     if [ $IS_VM_ALIVE -eq 0 ]
@@ -158,6 +164,9 @@ function build_on_vm {
     echo "cd tmp" >> $VM_CMDS
     echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $VM_CMDS
     echo "unzip -qq -DD ../localZip.zip" >> $VM_CMDS
+    # Trying to make some room on filesystem before building
+    echo "rm ../localZip.zip" >> $VM_CMDS
+    echo "export CI_ENV=True" >> $VM_CMDS
     if [[ "$VM_NAME" == *"-cppcheck"* ]]
     then
         echo "mkdir cmake_targets/log" >> $VM_CMDS
@@ -178,6 +187,8 @@ function build_on_vm {
         echo "mkdir -p cmake_targets/log" >> $VM_CMDS
         echo "chmod 777 cmake_targets/log" >> $VM_CMDS
         echo "cp /home/ubuntu/zip-install.txt cmake_targets/log" >> $VM_CMDS
+        # Patching the pistache build for Xenial (cmake too old for new commits)
+        echo "sed -i -e 's@cd pistache@cd pistache \&\& git checkout -f 9a65f40975fafca5bb5370ba6d0d00f42cbc4356@' ./tools/install_dependencies" >> $VM_CMDS
         echo "echo \"./tools/install_dependencies \"" >> $VM_CMDS
         echo "./tools/install_dependencies > cmake_targets/log/install-build.txt 2>&1" >> $VM_CMDS
         echo "echo \"mkdir build\"" >> $VM_CMDS
@@ -206,7 +217,15 @@ function build_on_vm {
             echo "echo \"./build_oai -I $BUILD_OPTIONS \"" >> $VM_CMDS
             echo "./build_oai -I $BUILD_OPTIONS > log/install-build.txt 2>&1" >> $VM_CMDS
         else
-            echo "echo \"./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            if [[ "$VM_NAME" == *"-enb-ethernet"* ]]
+            then
+                echo "echo \"sleep 170 && ./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            elif [[ "$VM_NAME" == *"-ue-ethernet"* ]]
+            then
+                echo "echo \"sleep 60 && ./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            else
+                echo "echo \"./build_oai -I $BUILD_OPTIONS\" > ./my-vm-build.sh" >> $VM_CMDS
+            fi
             echo "chmod 775 ./my-vm-build.sh " >> $VM_CMDS
             echo "echo \"sudo -E daemon --inherit --unsafe --name=build_daemon --chdir=/home/ubuntu/tmp/cmake_targets -o /home/ubuntu/tmp/cmake_targets/log/install-build.txt ./my-vm-build.sh\"" >> $VM_CMDS
             echo "sudo -E daemon --inherit --unsafe --name=build_daemon --chdir=/home/ubuntu/tmp/cmake_targets -o /home/ubuntu/tmp/cmake_targets/log/install-build.txt ./my-vm-build.sh" >> $VM_CMDS

ci-scripts/build_fr1_from_yaml.py

@@ -0,0 +1,83 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+"""
+Created on Tue Jul  7 23:04:51 2020
+
+@author: hardy
+"""
+
+
+
+import yaml
+import sys
+import subprocess
+
+      
+
+def main():
+  f_yaml=sys.argv[1]
+  f_sh=sys.argv[2]
+  #filename='py_params_template.yaml'
+  with open(f_yaml,'r') as file:
+    # The FullLoader parameter handles the conversion from YAML
+    # scalar values to Python the dictionary format
+    print('Loading '+f_yaml)
+    params = yaml.load(file,Loader=yaml.FullLoader)
+
+
+  with open(f_sh,'w') as f:
+    f.write('#!/bin/sh\n')
+    for i in range (0, len(params['steps'])):
+      step=params['steps'][i].split(',')
+      mode=step[0]
+      f_xml=step[1]
+      line='python3 main.py ' + \
+           '--mode='+ mode + ' ' + \
+           '--ranRepository=' + params['ranRepository'] + ' ' + \
+           '--ranBranch=' + params['ranBranch'] + ' ' + \
+           '--ranCommitID=' + params['ranCommitID'] + ' ' + \
+           '--ranAllowMerge=' + params['ranAllowMerge'] + ' ' + \
+           '--ranTargetBranch=' + params['ranTargetBranch'] + ' ' + \
+           \
+           '--ADBIPAddress=' + params['ADB']['ADBIPAddress'] + ' ' + \
+           '--ADBUserName=' + params['ADB']['ADBUserName'] + ' ' + \
+           '--ADBPassword=' + params['ADB']['ADBPassword'] + ' ' + \
+           \
+           '--UEIPAddress=' + params['UE']['UEIPAddress'] + ' ' + \
+           '--UEUserName=' + params['UE']['UEUserName'] + ' ' + \
+           '--UEPassword=' + params['UE']['UEPassword'] + ' ' + \
+           '--UESourceCodePath=' + params['UE']['UESourceCodePath'] + ' ' + \
+           \
+           '--EPCIPAddress=' + params['EPC']['EPCIPAddress'] + ' ' + \
+           '--EPCUserName=' + params['EPC']['EPCUserName'] + ' ' + \
+           '--EPCPassword=' + params['EPC']['EPCPassword'] + ' ' + \
+           '--EPCSourceCodePath=' + params['EPC']['EPCSourceCodePath'] + ' ' + \
+           '--EPCType=' + params['EPC']['EPCType'] + ' ' + \
+           \
+           '--eNBIPAddress=' + params['RAN'][0]['eNBIPAddress'] + ' ' + \
+           '--eNBUserName=' + params['RAN'][0]['eNBUserName'] + ' ' + \
+           '--eNBPassword=' + params['RAN'][0]['eNBPassword'] + ' ' + \
+           '--eNBSourceCodePath=' + params['RAN'][0]['eNBSourceCodePath'] + ' ' + \
+           \
+           '--eNB1IPAddress=' + params['RAN'][1]['eNB1IPAddress'] + ' ' + \
+           '--eNB1UserName=' + params['RAN'][1]['eNB1UserName'] + ' ' + \
+           '--eNB1Password=' + params['RAN'][1]['eNB1Password'] + ' ' + \
+           '--eNB1SourceCodePath=' + params['RAN'][1]['eNB1SourceCodePath'] + ' '
+      if mode!="InitiateHtml":
+         line+='--XMLTestFile=' + f_xml
+      #if mode is InitiateHTML we have a special processing to mention all xml files from the list
+      #loop starting at 1 to avoid the xml file mentioned with InitiateHtml in yaml file (file is none)
+      else:
+         for i in range (1, len(params['steps'])):
+            step=params['steps'][i].split(',')
+            f_xml=step[1]
+            line+='--XMLTestFile=' + f_xml+' '
+      line+='\n'
+      print(line)
+      f.write(line)
+  subprocess.call(['chmod','777',f_sh])
+
+if __name__ == "__main__":
+    main()
+
+

ci-scripts/build_fr1_template.yaml

@@ -0,0 +1,46 @@
+
+ranRepository : https://gitlab.eurecom.fr/oai/openairinterface5g.git
+ranBranch : integration_2021_wk13_a  
+ranCommitID : 104aa7eed5d6702c1b9da663414079ef698da206     
+ranAllowMerge : 'yes' 
+ranTargetBranch : develop
+
+steps:
+  - InitiateHtml,none
+  - TesteNB,xml_files/fr1_multi_node_build.xml
+  - TesteNB,xml_files/fr1_epc_start.xml
+  - TesteNB,xml_files/fr1_nsa_base_next.xml #ue toggle, nodes initialize, ue toggle, ping, nodes terminate
+  - TesteNB,xml_files/fr1_epc_closure.xml
+
+
+ADB: #on Caracal
+  ADBIPAddress : 192.168.18.196
+  ADBUserName : oaici
+  ADBPassword : KkexF6CErOi1fNuebCPsuIVK
+
+RAN:
+    - eNBIPAddress : 192.168.18.199 #eNB on Minimassive
+      eNBUserName : oaicicd
+      eNBPassword : HzB*nkryaITdVd08TKlT#2Z5a!7M#~qn
+      eNBSourceCodePath : /tmp/CI-FR1-eNB
+    - eNB1IPAddress : 192.168.18.198 #gNB on Mozart
+      eNB1UserName : oaicicd
+      eNB1Password : 7zkDOFgh@w3HvRBMPTMh@BAx
+      eNB1SourceCodePath : /tmp/CI-FR1-gNB
+
+
+EPC: #on Nikaia 
+  EPCIPAddress : 192.168.18.99
+  EPCUserName : nikaia
+  EPCPassword : linux
+  EPCSourceCodePath : /tmp/CI-FR1-EPC
+  EPCType : ltebox
+
+
+UE:
+  UEIPAddress : none
+  UEUserName : none
+  UEPassword : none
+  UESourceCodePath : none
+
+

ci-scripts/checkCodingFormattingRules.sh

@@ -76,8 +76,8 @@ then
     do
        IS_NFAPI=`echo $FILE | egrep -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext" || true`
        IS_OAI_LICENCE_PRESENT=`egrep -c "OAI Public License" $FILE || true`
-       IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence" $FILE || true`
-       IS_EXCEPTION=`echo $FILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h|openair3/GTPV1-U/nw-gtpv1u|openair2/UTIL/OPT/ws_|openair3/NAS/COMMON/milenage.h" || true`
+       IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence|License-Identifier: BSD-2-Clause" $FILE || true`
+       IS_EXCEPTION=`echo $FILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h|openair3/GTPV1-U/nw-gtpv1u|openair2/UTIL/OPT/ws_|openair2/UTIL/OPT/packet-rohc.h|openair3/NAS/COMMON/milenage.h" || true`
        if [ $IS_OAI_LICENCE_PRESENT -eq 0 ] && [ $IS_BSD_LICENCE_PRESENT -eq 0 ]
        then
            if [ $IS_NFAPI -eq 0 ] && [ $IS_EXCEPTION -eq 0 ]
@@ -197,8 +197,8 @@ do
         then
             IS_NFAPI=`echo $FULLFILE | egrep -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext" || true`
             IS_OAI_LICENCE_PRESENT=`egrep -c "OAI Public License" $FULLFILE || true`
-            IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence" $FULLFILE || true`
-            IS_EXCEPTION=`echo $FULLFILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h|openair3/GTPV1-U/nw-gtpv1u|openair2/UTIL/OPT/ws_|openair3/NAS/COMMON/milenage.h" || true`
+            IS_BSD_LICENCE_PRESENT=`egrep -c "the terms of the BSD Licence|License-Identifier: BSD-2-Clause" $FULLFILE || true`
+            IS_EXCEPTION=`echo $FULLFILE | egrep -c "common/utils/collection/tree.h|common/utils/collection/queue.h|common/utils/itti_analyzer/common/queue.h|openair3/UTILS/tree.h|openair3/UTILS/queue.h|openair3/GTPV1-U/nw-gtpv1u|openair2/UTIL/OPT/ws_|openair2/UTIL/OPT/packet-rohc.h|openair3/NAS/COMMON/milenage.h" || true`
             if [ $IS_OAI_LICENCE_PRESENT -eq 0 ] && [ $IS_BSD_LICENCE_PRESENT -eq 0 ]
             then
                 if [ $IS_NFAPI -eq 0 ] && [ $IS_EXCEPTION -eq 0 ]

ci-scripts/checkGitLabMergeRequestLabels.sh

@@ -0,0 +1,108 @@
+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function usage {
+    echo "OAI GitLab merge request applying script"
+    echo "   Original Author: Raphael Defosseux"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo ""
+    echo "    checkGitLabMergeRequestLabels.sh [OPTIONS]"
+    echo ""
+    echo "Options:"
+    echo "------------------"
+    echo ""
+    echo "    --mr-id ####"
+    echo "    Specify the ID of the merge request."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+if [ $# -ne 2 ] && [ $# -ne 1 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    --mr-id)
+    MERGE_REQUEST_ID="$2"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+done
+
+LABELS=`curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/$MERGE_REQUEST_ID" | jq '.labels' || true`
+
+IS_MR_BUILD_ONLY=`echo $LABELS | grep -c BUILD-ONLY || true`
+IS_MR_CI=`echo $LABELS | grep -c CI || true`
+IS_MR_4G=`echo $LABELS | grep -c 4G-LTE || true`
+IS_MR_5G=`echo $LABELS | grep -c 5G-NR || true`
+
+# First case: none is present! No CI
+if [ $IS_MR_BUILD_ONLY -eq 0 ] && [ $IS_MR_CI -eq 0 ] && [ $IS_MR_4G -eq 0 ] && [ $IS_MR_5G -eq 0 ]
+then
+    echo "NONE"
+    exit 0
+fi
+
+# Second case: Build-Only
+if [ $IS_MR_BUILD_ONLY -eq 1 ]
+then
+    echo "BUILD-ONLY"
+    exit 0
+fi
+
+# Third case: CI or 4G label --> Full CI run
+if [ $IS_MR_4G -eq 1 ] || [ $IS_MR_CI -eq 1 ] 
+then
+    echo "FULL"
+    exit 0
+fi
+
+# Fourth case: 5G label
+if [ $IS_MR_BUILD_ONLY -eq 0 ] && [ $IS_MR_CI -eq 0 ] && [ $IS_MR_4G -eq 0 ] && [ $IS_MR_5G -eq 1 ]
+then
+    echo "SHORTEN-5G"
+    exit 0
+fi
+

ci-scripts/ci_ctl_qtel.py

@@ -0,0 +1,86 @@
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+#   Required Python Version
+#     Python 3.x
+#
+#---------------------------------------------------------------------
+
+#usage example:
+#sudo python3 ci_ctl_qtel.py /dev/ttyUSB2 wup
+#sudo python3 ci_ctl_qtel.py /dev/ttyUSB2 detach
+
+
+import sys
+import time
+import serial
+
+
+class qtel_ctl:
+	#---------------
+	#private methods
+	#---------------
+    def __init__(self, usb_port_at):
+        self.QUECTEL_USB_PORT_AT = usb_port_at #ex : '/dev/ttyUSB2'
+        self.modem = serial.Serial(self.QUECTEL_USB_PORT_AT, timeout=1)
+        self.cmd_dict= {"wup": self.wup,"detach":self.detach}#dictionary of function pointers
+
+    def __set_modem_state(self,ser,state):
+	    self.__send_command(ser,"AT+CFUN={}\r".format(state))
+
+    def __send_command(self,ser,com):
+        ser.write(com.encode())
+        time.sleep(0.1)
+        ret=[]
+        while ser.inWaiting()>0:
+            print("waiting")
+            msg=ser.readline()
+            msg=msg.decode("utf-8")
+            msg=msg.replace("\r","")
+            msg=msg.replace("\n","")
+            print(msg)
+            if msg!="":
+                ret.append(msg)
+            else:
+                print("msg empty")
+        return ret
+
+	#--------------
+	#public methods
+	#--------------
+    def wup(self):#sending AT+CFUN=0, then AT+CFUN=1
+        self.__set_modem_state(self.modem,'0')
+        time.sleep(3)
+        self.__set_modem_state(self.modem,'1')
+
+    def detach(self):#sending AT+CFUN=0
+        self.__set_modem_state(self.modem,'0')
+
+
+
+
+if __name__ == "__main__":
+    #argv[1] : usb port
+    #argv[2] : qtel command (see function pointers dict "wup", "detach" etc ...)
+    command = sys.argv[2]
+    Module=qtel_ctl(sys.argv[1])
+    #calling the function to be applied
+    Module.cmd_dict[command]()

ci-scripts/ci_ueinfra.yaml

@@ -0,0 +1,49 @@
+idefix:
+  ID: idefix
+  State : enabled
+  Kind : quectel
+  Process : 
+    Name : quectel-CM
+    Cmd : /home/oaicicd/quectel-CM/quectel-CM -s oai.ipv4 -4
+  WakeupScript : ci_ctl_qtel.py /dev/ttyUSB2 wup
+  DetachScript : ci_ctl_qtel.py /dev/ttyUSB2 detach
+  LogStore : /media/usb-drive/ci_qlogs
+  PLMN : 22201
+  UENetwork : wwan0 
+  HostIPAddress : 192.168.18.188
+  HostUsername : oaicicd
+  HostPassword : oaicicd
+  HostSourceCodePath : none
+nrmodule2_quectel:
+  ID: nrmodule2_quectel
+  State : enabled
+  Kind : quectel
+  Process :
+    Name : quectel-CM
+    Cmd : /home/nrmodule2/quectel-CM/quectel-CM -s oai.ipv4 -4
+  WakeupScript : ci_ctl_qtel.py /dev/ttyUSB7 wup
+  DetachScript : ci_ctl_qtel.py /dev/ttyUSB7 detach
+  LogStore : /media/ci_qlogs  
+  PLMN : 20899 
+  UENetwork : wwan1
+  HostIPAddress : 192.168.18.189
+  HostUsername : nrmodule2 
+  HostPassword : linux 
+  HostSourceCodePath : none
+dummy:
+  ID: ''
+  State : ''
+  Kind : ''
+  Process : 
+    Name : ''
+    Cmd : ''
+  WakeupScript : ''
+  DetachScript : ''
+  PLMN : 22201
+  UENetwork : wwan0
+  HostIPAddress : 192.168.18.188
+  HostUsername : oaicicd
+  HostPassword : oaicicd
+  HostSourceCodePath : none
+
+

ci-scripts/cls_ci_ueinfra.py

@@ -0,0 +1,57 @@
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+#   Required Python Version
+#     Python 3.x
+#
+#---------------------------------------------------------------------
+
+#to use isfile
+import os
+import sys
+import logging
+#to create a SSH object locally in the methods
+import sshconnection
+#time.sleep
+import time
+#to load ue infrastructure dictionary
+import yaml
+
+class InfraUE:
+	def __init__(self):
+		self.ci_ue_infra ={}
+
+
+#-----------------$
+#PUBLIC Methods$
+#-----------------$
+
+	#This method reads the yaml file describing the multi-UE infrastructure
+	#and stores the infra permanently in the related class attribute self.ci_ue_infra
+	def Get_UE_Infra(self,ue_infra_filename):
+		f_yaml=ue_infra_filename
+		with open(f_yaml,'r') as file:
+			logging.debug('Loading UE infrastructure from file '+f_yaml)
+			#load it permanently in the class attribute
+			self.ci_ue_infra = yaml.load(file,Loader=yaml.FullLoader)
+
+
+

ci-scripts/cls_containerize.py

@@ -0,0 +1,846 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+# Python for CI of OAI-eNB + COTS-UE
+#
+#   Required Python Version
+#     Python 3.x
+#
+#   Required Python Package
+#     pexpect
+#---------------------------------------------------------------------
+
+#-----------------------------------------------------------
+# Import
+#-----------------------------------------------------------
+import sys              # arg
+import re               # reg
+import logging
+import os
+import shutil
+import subprocess
+import time
+from multiprocessing import Process, Lock, SimpleQueue
+from zipfile import ZipFile
+
+#-----------------------------------------------------------
+# OAI Testing modules
+#-----------------------------------------------------------
+import sshconnection as SSH
+import helpreadme as HELP
+import constants as CONST
+
+#-----------------------------------------------------------
+# Class Declaration
+#-----------------------------------------------------------
+class Containerize():
+
+	def __init__(self):
+		
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranAllowMerge = False
+		self.ranCommitID = ''
+		self.ranTargetBranch = ''
+		self.eNBIPAddress = ''
+		self.eNBUserName = ''
+		self.eNBPassword = ''
+		self.eNBSourceCodePath = ''
+		self.eNB1IPAddress = ''
+		self.eNB1UserName = ''
+		self.eNB1Password = ''
+		self.eNB1SourceCodePath = ''
+		self.eNB2IPAddress = ''
+		self.eNB2UserName = ''
+		self.eNB2Password = ''
+		self.eNB2SourceCodePath = ''
+		self.forcedWorkspaceCleanup = False
+		self.imageKind = ''
+		self.eNB_instance = 0
+		self.eNB_serverId = ['', '', '']
+		self.yamlPath = ['', '', '']
+		self.services = ['', '', '']
+		self.nb_healthy = [0, 0, 0]
+		self.exitStatus = 0
+		self.eNB_logFile = ['', '', '']
+
+		self.testCase_id = ''
+
+		self.flexranCtrlDeployed = False
+		self.flexranCtrlIpAddress = ''
+		self.cli = ''
+		self.cliBuildOptions = ''
+		self.dockerfileprefix = ''
+		self.host = ''
+		self.allImagesSize = {}
+		self.collectInfo = {}
+
+		self.pingContName = ''
+		self.pingOptions = ''
+		self.pingLossThreshold = ''
+		self.svrContName = ''
+		self.svrOptions = ''
+		self.cliContName = ''
+		self.cliOptions = ''
+
+#-----------------------------------------------------------
+# Container management functions
+#-----------------------------------------------------------
+
+	def BuildImage(self, HTML):
+		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		if self.eNB_serverId[self.eNB_instance] == '0':
+			lIpAddr = self.eNBIPAddress
+			lUserName = self.eNBUserName
+			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '1':
+			lIpAddr = self.eNB1IPAddress
+			lUserName = self.eNB1UserName
+			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '2':
+			lIpAddr = self.eNB2IPAddress
+			lUserName = self.eNB2UserName
+			lPassWord = self.eNB2Password
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('Building on server: ' + lIpAddr)
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+	
+		# Checking the hostname to get adapted on cli and dockerfileprefixes
+		mySSH.command('hostnamectl', '\$', 5)
+		result = re.search('Ubuntu|Red Hat',  mySSH.getBefore())
+		self.host = result.group(0)
+		if self.host == 'Ubuntu':
+			self.cli = 'docker'
+			self.dockerfileprefix = '.ubuntu18'
+			self.cliBuildOptions = '--no-cache'
+		elif self.host == 'Red Hat':
+			self.cli = 'sudo podman'
+			self.dockerfileprefix = '.rhel8.2'
+			self.cliBuildOptions = '--no-cache --disable-compression'
+
+		imageNames = []
+		result = re.search('eNB', self.imageKind)
+		# Creating a tupple with the imageName and the DockerFile prefix pattern on obelix
+		if result is not None:
+			imageNames.append(('oai-enb', 'eNB'))
+		else:
+			result = re.search('gNB', self.imageKind)
+			if result is not None:
+				imageNames.append(('oai-gnb', 'gNB'))
+			else:
+				result = re.search('all', self.imageKind)
+				if result is not None:
+					imageNames.append(('oai-enb', 'eNB'))
+					imageNames.append(('oai-gnb', 'gNB'))
+					imageNames.append(('oai-lte-ue', 'lteUE'))
+					imageNames.append(('oai-nr-ue', 'nrUE'))
+					if self.host == 'Red Hat':
+						imageNames.append(('oai-physim', 'phySim'))
+					if self.host == 'Ubuntu':
+						imageNames.append(('oai-lte-ru', 'lteRU'))
+		if len(imageNames) == 0:
+			imageNames.append(('oai-enb', 'eNB'))
+		
+		# Workaround for some servers, we need to erase completely the workspace
+		if self.forcedWorkspaceCleanup:
+			mySSH.command('echo ' + lPassWord + ' | sudo -S rm -Rf ' + lSourcePath, '\$', 15)
+	
+		self.testCase_id = HTML.testCase_id
+	
+		# on RedHat/CentOS .git extension is mandatory
+		result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
+		if result is not None:
+			full_ran_repo_name = self.ranRepository.replace('git/', 'git')
+		else:
+			full_ran_repo_name = self.ranRepository + '.git'
+		mySSH.command('mkdir -p ' + lSourcePath, '\$', 5)
+		mySSH.command('cd ' + lSourcePath, '\$', 5)
+		mySSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600)
+		# Raphael: here add a check if git clone or git fetch went smoothly
+		mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
+		mySSH.command('git config user.name "OAI Jenkins"', '\$', 5)
+
+		mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
+		mySSH.command('mkdir -p cmake_targets/log', '\$', 5)
+		# if the commit ID is provided use it to point to it
+		if self.ranCommitID != '':
+			mySSH.command('git checkout -f ' + self.ranCommitID, '\$', 30)
+		# if the branch is not develop, then it is a merge request and we need to do 
+		# the potential merge. Note that merge conflicts should already been checked earlier
+		imageTag = 'develop'
+		sharedTag = 'develop'
+		if (self.ranAllowMerge):
+			imageTag = 'ci-temp'
+			if self.ranTargetBranch == '':
+				if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
+					mySSH.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
+			else:
+				logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
+				mySSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
+
+ 		# if asterix, copy the entitlement and subscription manager configurations
+		if self.host == 'Red Hat':
+			mySSH.command('mkdir -p  tmp/ca/', '\$', 5)
+			mySSH.command('mkdir -p tmp/entitlement/', '\$', 5) 
+			mySSH.command('sudo cp /etc/rhsm/ca/redhat-uep.pem tmp/ca/', '\$', 5)
+			mySSH.command('sudo cp /etc/pki/entitlement/*.pem tmp/entitlement/', '\$', 5)
+
+		sharedimage = 'ran-build'
+		# Let's remove any previous run artifacts if still there
+		mySSH.command(self.cli + ' image prune --force', '\$', 30)
+		if (not self.ranAllowMerge):
+			mySSH.command(self.cli + ' image rm ' + sharedimage + ':' + sharedTag, '\$', 30)
+		for image,pattern in imageNames:
+			mySSH.command(self.cli + ' image rm ' + image + ':' + imageTag, '\$', 30)
+
+		# Build the shared image only on Push Events (not on Merge Requests)
+		if (not self.ranAllowMerge):
+			mySSH.command(self.cli + ' build ' + self.cliBuildOptions + ' --target ' + sharedimage + ' --tag ' + sharedimage + ':' + sharedTag + ' --file docker/Dockerfile.ran' + self.dockerfileprefix + ' --build-arg NEEDED_GIT_PROXY="http://proxy.eurecom.fr:8080" . > cmake_targets/log/ran-build.log 2>&1', '\$', 1600)
+		# First verify if the shared image was properly created.
+		status = True
+		mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + sharedimage + ':' + sharedTag, '\$', 5)
+		if mySSH.getBefore().count('o such image') != 0:
+			logging.error('\u001B[1m Could not build properly ran-build\u001B[0m')
+			status = False
+		else:
+			result = re.search('Size *= *(?P<size>[0-9\-]+) *bytes', mySSH.getBefore())
+			if result is not None:
+				imageSize = float(result.group('size'))
+				imageSize = imageSize / 1000
+				if imageSize < 1000:
+					logging.debug('\u001B[1m   ran-build size is ' + ('%.0f' % imageSize) + ' kbytes\u001B[0m')
+					self.allImagesSize['ran-build'] = str(round(imageSize,1)) + ' kbytes'
+				else:
+					imageSize = imageSize / 1000
+					if imageSize < 1000:
+						logging.debug('\u001B[1m   ran-build size is ' + ('%.0f' % imageSize) + ' Mbytes\u001B[0m')
+						self.allImagesSize['ran-build'] = str(round(imageSize,1)) + ' Mbytes'
+					else:
+						imageSize = imageSize / 1000
+						logging.debug('\u001B[1m   ran-build size is ' + ('%.3f' % imageSize) + ' Gbytes\u001B[0m')
+						self.allImagesSize['ran-build'] = str(round(imageSize,1)) + ' Gbytes'
+			else:
+				logging.debug('ran-build size is unknown')
+		# If the shared image failed, no need to continue
+		if not status:
+			# Recover the name of the failed container?
+			mySSH.command(self.cli + ' ps --quiet --filter "status=exited" -n1 | xargs ' + self.cli + ' rm -f', '\$', 5)
+			mySSH.command(self.cli + ' image prune --force', '\$', 30)
+			mySSH.close()
+			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit(1)
+		else:
+			# Recover build logs, for the moment only possible when build is successful
+			mySSH.command(self.cli + ' create --name test ' + sharedimage + ':' + sharedTag, '\$', 5)
+			mySSH.command('mkdir -p cmake_targets/log/ran-build', '\$', 5)
+			mySSH.command(self.cli + ' cp test:/oai-ran/cmake_targets/log/. cmake_targets/log/ran-build', '\$', 5)
+			mySSH.command(self.cli + ' rm -f test', '\$', 5)
+
+		# Build the target image(s)
+		for image,pattern in imageNames:
+			# the archived Dockerfiles have "ran-build:latest" as base image
+			# we need to update them with proper tag
+			mySSH.command('sed -i -e "s#' + sharedimage + ':latest#' + sharedimage + ':' + sharedTag + '#" docker/Dockerfile.' + pattern + self.dockerfileprefix, '\$', 5)
+			mySSH.command(self.cli + ' build ' + self.cliBuildOptions + ' --target ' + image + ' --tag ' + image + ':' + imageTag + ' --file docker/Dockerfile.' + pattern + self.dockerfileprefix + ' . > cmake_targets/log/' + image + '.log 2>&1', '\$', 1200)
+			# split the log
+			mySSH.command('mkdir -p cmake_targets/log/' + image, '\$', 5)
+			mySSH.command('python3 ci-scripts/docker_log_split.py --logfilename=cmake_targets/log/' + image + '.log', '\$', 5)
+			# checking the status of the build
+			mySSH.command(self.cli + ' image inspect --format=\'Size = {{.Size}} bytes\' ' + image + ':' + imageTag, '\$', 5)
+			if mySSH.getBefore().count('o such image') != 0:
+				logging.error('\u001B[1m Could not build properly ' + image + '\u001B[0m')
+				status = False
+				# Here we should check if the last container corresponds to a failed command and destroy it
+				mySSH.command(self.cli + ' ps --quiet --filter "status=exited" -n1 | xargs ' + self.cli + ' rm -f', '\$', 5)
+				self.allImagesSize[image] = 'N/A -- Build Failed'
+			else:
+				result = re.search('Size *= *(?P<size>[0-9\-]+) *bytes', mySSH.getBefore())
+				if result is not None:
+					imageSize = float(result.group('size'))
+					imageSize = imageSize / 1000
+					if imageSize < 1000:
+						logging.debug('\u001B[1m   ' + image + ' size is ' + ('%.0f' % imageSize) + ' kbytes\u001B[0m')
+						self.allImagesSize[image] = str(round(imageSize,1)) + ' kbytes'
+					else:
+						imageSize = imageSize / 1000
+						if imageSize < 1000:
+							logging.debug('\u001B[1m   ' + image + ' size is ' + ('%.0f' % imageSize) + ' Mbytes\u001B[0m')
+							self.allImagesSize[image] = str(round(imageSize,1)) + ' Mbytes'
+						else:
+							imageSize = imageSize / 1000
+							logging.debug('\u001B[1m   ' + image + ' size is ' + ('%.3f' % imageSize) + ' Gbytes\u001B[0m')
+							self.allImagesSize[image] = str(round(imageSize,1)) + ' Gbytes'
+				else:
+					logging.debug('ran-build size is unknown')
+					self.allImagesSize[image] = 'unknown'
+			# Now pruning dangling images in between target builds
+			mySSH.command(self.cli + ' image prune --force', '\$', 30)
+
+		# Analyzing the logs
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
+		mySSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
+		mySSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
+
+		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
+		mySSH.command('rm -f build_log_' + self.testCase_id + '.zip || true', '\$', 5)
+		if (os.path.isfile('./build_log_' + self.testCase_id + '.zip')):
+			os.remove('./build_log_' + self.testCase_id + '.zip')
+		if (os.path.isdir('./build_log_' + self.testCase_id)):
+			shutil.rmtree('./build_log_' + self.testCase_id)
+		mySSH.command('zip -r -qq build_log_' + self.testCase_id + '.zip build_log_' + self.testCase_id, '\$', 5)
+		mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/build_log_' + self.testCase_id + '.zip', '.')
+		mySSH.command('rm -f build_log_' + self.testCase_id + '.zip','\$', 5)
+		mySSH.close()
+		ZipFile('build_log_' + self.testCase_id + '.zip').extractall('.')
+
+		#Trying to identify the errors and warnings for each built images
+		imageNames1 = imageNames
+		shared = ('ran-build','ran')
+		imageNames1.insert(0, shared) 
+		for image,pattern in imageNames1:
+			files = {}
+			file_list = [f for f in os.listdir('build_log_' + self.testCase_id + '/' + image) if os.path.isfile(os.path.join('build_log_' + self.testCase_id + '/' + image, f)) and f.endswith('.txt')]
+			for fil in file_list:
+				errorandwarnings = {}
+				warningsNo = 0
+				errorsNo = 0
+				with open('build_log_{}/{}/{}'.format(self.testCase_id,image,fil), mode='r') as inputfile:
+					for line in inputfile:
+						result = re.search(' ERROR ', str(line))
+						if result is not None:
+							errorsNo += 1
+						result = re.search(' error:', str(line))
+						if result is not None:
+							errorsNo += 1
+						result = re.search(' WARNING ', str(line))
+						if result is not None:
+							warningsNo += 1
+						result = re.search(' warning:', str(line))
+						if result is not None:
+							warningsNo += 1
+					errorandwarnings['errors'] = errorsNo
+					errorandwarnings['warnings'] = warningsNo
+					errorandwarnings['status'] = status
+				files[fil] = errorandwarnings
+			# Let analyze the target image creation part
+			if os.path.isfile('build_log_{}/{}.log'.format(self.testCase_id,image)):
+				errorandwarnings = {}
+				with open('build_log_{}/{}.log'.format(self.testCase_id,image), mode='r') as inputfile:
+					startOfTargetImageCreation = False
+					buildStatus = False
+					for line in inputfile:
+						result = re.search('FROM .* [aA][sS] ' + image + '$', str(line))
+						if result is not None:
+							startOfTargetImageCreation = True
+						if startOfTargetImageCreation:
+							result = re.search('Successfully tagged ' + image + ':', str(line))
+							if result is not None:
+								buildStatus = True
+							result = re.search('COMMIT ' + image + ':', str(line))
+							if result is not None:
+								buildStatus = True
+					inputfile.close()
+					if buildStatus:
+						errorandwarnings['errors'] = 0
+					else:
+						errorandwarnings['errors'] = 1
+					errorandwarnings['warnings'] = 0
+					errorandwarnings['status'] = buildStatus
+					files['Target Image Creation'] = errorandwarnings
+			self.collectInfo[image] = files
+		
+		if status:
+			logging.info('\u001B[1m Building OAI Image(s) Pass\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'OK', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlNextTabHeaderTestRow(self.collectInfo, self.allImagesSize)
+		else:
+			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
+			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlNextTabHeaderTestRow(self.collectInfo, self.allImagesSize)
+			HTML.CreateHtmlTabFooter(False)
+			sys.exit(1)
+
+	def DeployObject(self, HTML, EPC):
+		if self.eNB_serverId[self.eNB_instance] == '0':
+			lIpAddr = self.eNBIPAddress
+			lUserName = self.eNBUserName
+			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '1':
+			lIpAddr = self.eNB1IPAddress
+			lUserName = self.eNB1UserName
+			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '2':
+			lIpAddr = self.eNB2IPAddress
+			lUserName = self.eNB2UserName
+			lPassWord = self.eNB2Password
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('\u001B[1m Deploying OAI Object on server: ' + lIpAddr + '\u001B[0m')
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+		# Putting the CPUs in a good state, we do that only on a few servers
+		mySSH.command('hostname', '\$', 5)
+		result = re.search('obelix|asterix',  mySSH.getBefore())
+		if result is not None:
+			mySSH.command('if command -v cpupower &> /dev/null; then echo ' + lPassWord + ' | sudo -S cpupower idle-set -D 0; fi', '\$', 5)
+			time.sleep(5)
+		
+		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
+		mySSH.command('cp docker-compose.yml ci-docker-compose.yml', '\$', 5)
+		imageTag = 'develop'
+		if (self.ranAllowMerge):
+			imageTag = 'ci-temp'
+		mySSH.command('sed -i -e "s/image: oai-enb:latest/image: oai-enb:' + imageTag + '/" ci-docker-compose.yml', '\$', 2)
+		localMmeIpAddr = EPC.MmeIPAddress
+		mySSH.command('sed -i -e "s/CI_MME_IP_ADDR/' + localMmeIpAddr + '/" ci-docker-compose.yml', '\$', 2)
+		if self.flexranCtrlDeployed:
+			mySSH.command('sed -i -e \'s/FLEXRAN_ENABLED:.*/FLEXRAN_ENABLED: "yes"/\' ci-docker-compose.yml', '\$', 2)
+			mySSH.command('sed -i -e "s/CI_FLEXRAN_CTL_IP_ADDR/' + self.flexranCtrlIpAddress + '/" ci-docker-compose.yml', '\$', 2)
+		else:
+			mySSH.command('sed -i -e "s/FLEXRAN_ENABLED:.*$/FLEXRAN_ENABLED: \"no\"/" ci-docker-compose.yml', '\$', 2)
+			mySSH.command('sed -i -e "s/CI_FLEXRAN_CTL_IP_ADDR/127.0.0.1/" ci-docker-compose.yml', '\$', 2)
+		# Currently support only one
+		mySSH.command('docker-compose --file ci-docker-compose.yml config --services | sed -e "s@^@service=@"', '\$', 2)
+		result = re.search('service=(?P<svc_name>[a-zA-Z0-9\_]+)', mySSH.getBefore())
+		if result is not None:
+			svcName = result.group('svc_name')
+			mySSH.command('docker-compose --file ci-docker-compose.yml up -d ' + svcName, '\$', 2)
+
+		# Checking Status
+		mySSH.command('docker-compose --file ci-docker-compose.yml config', '\$', 5)
+		result = re.search('container_name: (?P<container_name>[a-zA-Z0-9\-\_]+)', mySSH.getBefore())
+		unhealthyNb = 0
+		healthyNb = 0
+		startingNb = 0
+		containerName = ''
+		if result is not None:
+			containerName = result.group('container_name')
+			time.sleep(5)
+			cnt = 0
+			while (cnt < 3):
+				mySSH.command('docker inspect --format=\'{{.State.Health.Status}}\' ' + containerName, '\$', 5)
+				unhealthyNb = mySSH.getBefore().count('unhealthy')
+				healthyNb = mySSH.getBefore().count('healthy') - unhealthyNb
+				startingNb = mySSH.getBefore().count('starting')
+				if healthyNb == 1:
+					cnt = 10
+				else:
+					time.sleep(10)
+					cnt += 1
+		logging.debug(' -- ' + str(healthyNb) + ' healthy container(s)')
+		logging.debug(' -- ' + str(unhealthyNb) + ' unhealthy container(s)')
+		logging.debug(' -- ' + str(startingNb) + ' still starting container(s)')
+
+		status = False
+		if healthyNb == 1:
+			cnt = 0
+			while (cnt < 20):
+				mySSH.command('docker logs ' + containerName + ' | egrep --text --color=never -i "wait|sync|Starting"', '\$', 30) 
+				result = re.search('got sync|Starting F1AP at CU', mySSH.getBefore())
+				if result is None:
+					time.sleep(6)
+					cnt += 1
+				else:
+					cnt = 100
+					status = True
+					logging.info('\u001B[1m Deploying OAI object Pass\u001B[0m')
+					time.sleep(10)
+		mySSH.close()
+
+		self.testCase_id = HTML.testCase_id
+		self.eNB_logFile[self.eNB_instance] = 'enb_' + self.testCase_id + '.log'
+
+		if status:
+			HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		else:
+			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ALL_PROCESSES_OK)
+
+	def UndeployObject(self, HTML, RAN):
+		if self.eNB_serverId[self.eNB_instance] == '0':
+			lIpAddr = self.eNBIPAddress
+			lUserName = self.eNBUserName
+			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '1':
+			lIpAddr = self.eNB1IPAddress
+			lUserName = self.eNB1UserName
+			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
+		elif self.eNB_serverId[self.eNB_instance] == '2':
+			lIpAddr = self.eNB2IPAddress
+			lUserName = self.eNB2UserName
+			lPassWord = self.eNB2Password
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('\u001B[1m Deploying OAI Object on server: ' + lIpAddr + '\u001B[0m')
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
+		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
+		# Currently support only one
+		mySSH.command('docker-compose --file ci-docker-compose.yml config', '\$', 5)
+		result = re.search('container_name: (?P<container_name>[a-zA-Z0-9\-\_]+)', mySSH.getBefore())
+		if result is not None:
+			containerName = result.group('container_name')
+			mySSH.command('docker kill --signal INT ' + containerName, '\$', 30)
+			time.sleep(5)
+			mySSH.command('docker logs ' + containerName + ' > ' + lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '\$', 30)
+			mySSH.command('docker rm -f ' + containerName, '\$', 30)
+
+		# Putting the CPUs back in a idle state, we do that only on a few servers
+		mySSH.command('hostname', '\$', 5)
+		result = re.search('obelix|asterix',  mySSH.getBefore())
+		if result is not None:
+			mySSH.command('if command -v cpupower &> /dev/null; then echo ' + lPassWord + ' | sudo -S cpupower idle-set -E; fi', '\$', 5)
+		mySSH.close()
+
+		# Analyzing log file!
+		copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '.')
+		nodeB_prefix = 'e'
+		if (copyin_res == -1):
+			HTML.htmleNBFailureMsg='Could not copy ' + nodeB_prefix + 'NB logfile to analyze it!'
+			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
+		else:
+			logging.debug('\u001B[1m Analyzing ' + nodeB_prefix + 'NB logfile \u001B[0m ' + self.eNB_logFile[self.eNB_instance])
+			logStatus = RAN.AnalyzeLogFile_eNB(self.eNB_logFile[self.eNB_instance], HTML)
+			if (logStatus < 0):
+				HTML.CreateHtmlTestRow(RAN.runtime_stats, 'KO', logStatus)
+			else:
+				HTML.CreateHtmlTestRow(RAN.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
+		logging.info('\u001B[1m Undeploying OAI Object Pass\u001B[0m')
+
+	def DeployGenObject(self, HTML):
+		self.exitStatus = 0
+		logging.info('\u001B[1m Checking Services to deploy\u001B[0m')
+		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose config --services'
+		logging.debug(cmd)
+		try:
+			listServices = subprocess.check_output(cmd, shell=True, universal_newlines=True)
+		except Exception as e:
+			self.exitStatus = 1
+			HTML.CreateHtmlTestRow('SVC not Found', 'KO', CONST.ALL_PROCESSES_OK)
+			return
+		for reqSvc in self.services[0].split(' '):
+			res = re.search(reqSvc, listServices)
+			if res is None:
+				logging.error(reqSvc + ' not found in specified docker-compose')
+				self.exitStatus = 1
+		if (self.exitStatus == 1):
+			HTML.CreateHtmlTestRow('SVC not Found', 'KO', CONST.ALL_PROCESSES_OK)
+			return
+
+		if (self.ranAllowMerge):
+			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@ci-temp@" docker-compose.y*ml > docker-compose-ci.yml'
+		else:
+			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@develop@" docker-compose.y*ml > docker-compose-ci.yml'
+		logging.debug(cmd)
+		subprocess.run(cmd, shell=True)
+
+		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml up -d ' + self.services[0]
+		logging.debug(cmd)
+		try:
+			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
+		except Exception as e:
+			self.exitStatus = 1
+			logging.error('Could not deploy')
+			HTML.CreateHtmlTestRow('Could not deploy', 'KO', CONST.ALL_PROCESSES_OK)
+			return
+
+		logging.info('\u001B[1m Checking if all deployed healthy\u001B[0m')
+		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml ps -a'
+		count = 0
+		healthy = 0
+		while (count < 10):
+			count += 1
+			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+			healthy = 0
+			for state in deployStatus.split('\n'):
+				res = re.search('Up \(healthy\)', state)
+				if res is not None:
+					healthy += 1
+			if healthy == self.nb_healthy[0]:
+				count = 100
+			else:
+				time.sleep(10)
+
+		#  HACK TO REMOVE LATER WHEN FIX
+		res = re.search('oai-nr-ue', self.services[0])
+		if res is not None:
+			cmd = 'docker exec rfsim5g-oai-nr-ue /bin/bash -c "ip route del default"'
+			logging.debug(cmd)
+			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+			cmd = 'docker exec rfsim5g-oai-nr-ue /bin/bash -c "ip route del 12.1.1.0/24"'
+			logging.debug(cmd)
+			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+			cmd = 'docker exec rfsim5g-oai-nr-ue /bin/bash -c "ip route add default via 12.1.1.2 dev oaitun_ue1"'
+			logging.debug(cmd)
+			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+		#  END OF HACK TO REMOVE LATER WHEN FIX
+
+		if count == 100 and healthy == self.nb_healthy[0]:
+			HTML.CreateHtmlTestRow('n/a', 'OK', CONST.ALL_PROCESSES_OK)
+			logging.info('\u001B[1m Deploying OAI Object(s) PASS\u001B[0m')
+		else:
+			self.exitStatus = 1
+			HTML.CreateHtmlTestRow('Could not deploy in time', 'KO', CONST.ALL_PROCESSES_OK)
+			logging.error('\u001B[1m Deploying OAI Object(s) FAILED\u001B[0m')
+
+	def UndeployGenObject(self, HTML):
+		self.exitStatus = 0
+
+		if (self.ranAllowMerge):
+			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@ci-temp@" docker-compose.y*ml > docker-compose-ci.yml'
+		else:
+			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@develop@" docker-compose.y*ml > docker-compose-ci.yml'
+		logging.debug(cmd)
+		subprocess.run(cmd, shell=True)
+
+# if the containers are running, recover the logs!
+		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml ps --all'
+		logging.debug(cmd)
+		deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+		anyLogs = False
+		for state in deployStatus.split('\n'):
+			res = re.search('Name|----------', state)
+			if res is not None:
+				continue
+			if len(state) == 0:
+				continue
+			res = re.search('^(?P<container_name>[a-zA-Z0-9\-\_]+) ', state)
+			if res is not None:
+				anyLogs = True
+				cName = res.group('container_name')
+				cmd = 'cd ' + self.yamlPath[0] + ' && docker logs ' + cName + ' > ' + cName + '.log 2>&1'
+				logging.debug(cmd)
+				deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+		if anyLogs:
+			cmd = 'mkdir -p ../cmake_targets/log && mv ' + self.yamlPath[0] + '/*.log ../cmake_targets/log'
+			logging.debug(cmd)
+			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+
+		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml down'
+		logging.debug(cmd)
+		try:
+			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
+		except Exception as e:
+			self.exitStatus = 1
+			logging.error('Could not undeploy')
+			HTML.CreateHtmlTestRow('Could not undeploy', 'KO', CONST.ALL_PROCESSES_OK)
+			logging.error('\u001B[1m Undeploying OAI Object(s) FAILED\u001B[0m')
+			return
+
+		HTML.CreateHtmlTestRow('n/a', 'OK', CONST.ALL_PROCESSES_OK)
+		logging.info('\u001B[1m Undeploying OAI Object(s) PASS\u001B[0m')
+
+	def PingFromContainer(self, HTML):
+		self.exitStatus = 0
+		cmd = 'mkdir -p ../cmake_targets/log'
+		deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+
+		cmd = 'docker exec ' + self.pingContName + ' /bin/bash -c "ping ' + self.pingOptions + '" 2>&1 | tee ../cmake_targets/log/ping_' + HTML.testCase_id + '.log'
+		logging.debug(cmd)
+		deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
+
+		result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', deployStatus)
+		if result is None:
+			self.PingExit(HTML, False, 'Packet Loss Not Found')
+			return
+
+		packetloss = result.group('packetloss')
+		if float(packetloss) == 100:
+			self.PingExit(HTML, False, 'Packet Loss is 100%')
+			return
+
+		result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', deployStatus)
+		if result is None:
+			self.PingExit(HTML, False, 'Ping RTT_Min RTT_Avg RTT_Max Not Found!')
+			return
+
+		rtt_min = result.group('rtt_min')
+		rtt_avg = result.group('rtt_avg')
+		rtt_max = result.group('rtt_max')
+		pal_msg = 'Packet Loss : ' + packetloss + '%'
+		min_msg = 'RTT(Min)    : ' + rtt_min + ' ms'
+		avg_msg = 'RTT(Avg)    : ' + rtt_avg + ' ms'
+		max_msg = 'RTT(Max)    : ' + rtt_max + ' ms'
+
+		message = 'ping result\n'
+		message += '    ' + pal_msg + '\n'
+		message += '    ' + min_msg + '\n'
+		message += '    ' + avg_msg + '\n'
+		message += '    ' + max_msg + '\n'
+		packetLossOK = True
+		if float(packetloss) > float(self.pingLossThreshold):
+			message += '\nPacket Loss too high'
+			packetLossOK = False
+		elif float(packetloss) > 0:
+			message += '\nPacket Loss is not 0%'
+		self.PingExit(HTML, packetLossOK, message)
+
+		if packetLossOK:
+			logging.debug('\u001B[1;37;44m ping result \u001B[0m')
+			logging.debug('\u001B[1;34m    ' + pal_msg + '\u001B[0m')
+			logging.debug('\u001B[1;34m    ' + min_msg + '\u001B[0m')
+			logging.debug('\u001B[1;34m    ' + avg_msg + '\u001B[0m')
+			logging.debug('\u001B[1;34m    ' + max_msg + '\u001B[0m')
+			logging.info('\u001B[1m Ping Test PASS\u001B[0m')
+
+	def PingExit(self, HTML, status, message):
+		html_queue = SimpleQueue()
+		html_cell = '<pre style="background-color:white">UE\n' + message + '</pre>'
+		html_queue.put(html_cell)
+		if status:
+			HTML.CreateHtmlTestRowQueue(self.pingOptions, 'OK', 1, html_queue)
+		else:
+			self.exitStatus = 1
+			logging.error('\u001B[1;37;41m ' + message + ' \u001B[0m')
+			HTML.CreateHtmlTestRowQueue(self.pingOptions, 'KO', 1, html_queue)
+
+	def IperfFromContainer(self, HTML):
+		self.exitStatus = 0
+
+		cmd = 'mkdir -p ../cmake_targets/log'
+		logStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+
+		# Start the server process
+		cmd = 'docker exec -d ' + self.svrContName + ' /bin/bash -c "nohup iperf ' + self.svrOptions + ' > /tmp/iperf_server.log 2>&1"'
+		logging.debug(cmd)
+		serverStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+		time.sleep(5)
+
+		# Start the client process
+		cmd = 'docker exec ' + self.cliContName + ' /bin/bash -c "iperf ' + self.cliOptions + '" 2>&1 | tee ../cmake_targets/log/iperf_client_' + HTML.testCase_id + '.log'
+		logging.debug(cmd)
+		clientStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
+
+		# Stop the server process
+		cmd = 'docker exec ' + self.svrContName + ' /bin/bash -c "pkill iperf"'
+		logging.debug(cmd)
+		serverStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+		time.sleep(5)
+		cmd = 'docker cp ' + self.svrContName + ':/tmp/iperf_server.log ../cmake_targets/log/iperf_server_' + HTML.testCase_id + '.log'
+		logging.debug(cmd)
+		serverStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+
+		# Analyze client output
+		result = re.search('Server Report:', clientStatus)
+		if result is None:
+			result = re.search('read failed: Connection refused', clientStatus)
+			if result is not None:
+				message = 'Could not connect to iperf server!'
+			else:
+				message = 'Server Report and Connection refused Not Found!'
+			self.IperfExit(HTML, False, message)
+			return
+
+		# Computing the requested bandwidth in float
+		result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', self.cliOptions)
+		if result is not None:
+			req_bandwidth = result.group('iperf_bandwidth')
+			req_bw = float(req_bandwidth)
+			result = re.search('-b [0-9\.]+K', self.cliOptions)
+			if result is not None:
+				req_bandwidth = '%.1f Kbits/sec' % req_bw
+				req_bw = req_bw * 1000
+			result = re.search('-b [0-9\.]+M', self.cliOptions)
+			if result is not None:
+				req_bandwidth = '%.1f Mbits/sec' % req_bw
+				req_bw = req_bw * 1000000
+
+		reportLine = None
+		reportLineFound = False
+		for iLine in clientStatus.split('\n'):
+			if reportLineFound:
+				reportLine = iLine
+				reportLineFound = False
+			res = re.search('Server Report:', iLine)
+			if res is not None:
+				reportLineFound = True
+		result = None
+		if reportLine is not None:
+			result = re.search('(?:|\[ *\d+\].*) (?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?P<jitter>[0-9\.]+ ms) +(\d+\/ ..\d+) +(\((?P<packetloss>[0-9\.]+)%\))', reportLine)
+		iperfStatus = True
+		if result is not None:
+			bitrate = result.group('bitrate')
+			packetloss = result.group('packetloss')
+			jitter = result.group('jitter')
+			logging.debug('\u001B[1;37;44m iperf result \u001B[0m')
+			iperfStatus = True
+			msg = 'Req Bitrate : ' + req_bandwidth + '\n'
+			logging.debug('\u001B[1;34m    Req Bitrate : ' + req_bandwidth + '\u001B[0m')
+			if bitrate is not None:
+				msg += 'Bitrate     : ' + bitrate + '\n'
+				logging.debug('\u001B[1;34m    Bitrate     : ' + bitrate + '\u001B[0m')
+				result = re.search('(?P<real_bw>[0-9\.]+) [KMG]bits/sec', str(bitrate))
+				if result is not None:
+					actual_bw = float(str(result.group('real_bw')))
+					result = re.search('[0-9\.]+ K', bitrate)
+					if result is not None:
+						actual_bw = actual_bw * 1000
+					result = re.search('[0-9\.]+ M', bitrate)
+					if result is not None:
+						actual_bw = actual_bw * 1000000
+					br_loss = 100 * actual_bw / req_bw
+					if br_loss < 90:
+						iperfStatus = False
+					bitperf = '%.2f ' % br_loss
+					msg += 'Bitrate Perf: ' + bitperf + '%\n'
+					logging.debug('\u001B[1;34m    Bitrate Perf: ' + bitperf + '%\u001B[0m')
+			if packetloss is not None:
+				msg += 'Packet Loss : ' + packetloss + '%\n'
+				logging.debug('\u001B[1;34m    Packet Loss : ' + packetloss + '%\u001B[0m')
+				if float(packetloss) > float(5):
+					msg += 'Packet Loss too high!\n'
+					logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
+					iperfStatus = False
+			if jitter is not None:
+				msg += 'Jitter      : ' + jitter + '\n'
+				logging.debug('\u001B[1;34m    Jitter      : ' + jitter + '\u001B[0m')
+			self.IperfExit(HTML, iperfStatus, msg)
+		else:
+			logging.error('problem?')
+		if iperfStatus:
+			logging.info('\u001B[1m Iperf Test PASS\u001B[0m')
+
+	def IperfExit(self, HTML, status, message):
+		html_queue = SimpleQueue()
+		html_cell = '<pre style="background-color:white">UE\n' + message + '</pre>'
+		html_queue.put(html_cell)
+		if status:
+			HTML.CreateHtmlTestRowQueue(self.cliOptions, 'OK', 1, html_queue)
+		else:
+			self.exitStatus = 1
+			HTML.CreateHtmlTestRowQueue(self.cliOptions, 'KO', 1, html_queue)