phy: allow only same number of log ports as bb ports

phy: rxdataF in grid
Do local receive beamforming. A list is used to store grid information till the rx slot is received. While in case of RU beamforming the grid info is sent to RU and no need to store the information locally. New buffer rxdataF_BF is created to hold beamformed signal and used in all L1 functions. Make rxdataF input to L1 procedures.
2026-07-19 15:40:30 +00:00 · 2026-04-16 02:16:22 +00:00 · 2026-04-16 02:16:18 +00:00 · 2026-04-16 02:16:18 +00:00 · 2026-04-16 02:16:18 +00:00 · 2026-04-16 02:16:18 +00:00
529 changed files with 15378 additions and 26823 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -7,7 +7,6 @@ cmake_targets/*/build/
 cmake_targets/ran_build/
 log/
 lte_build_oai/
-build*

 # IDE files
 .vscode
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -5,8 +5,8 @@ project (OpenAirInterface LANGUAGES C CXX)
 set(CMAKE_CXX_STANDARD 17)
 set(OAI_VERSION 2.4.0)

-option(ENABLE_CHANNEL_SIM_CUDA "Enable CUDA accelerated channel simulation" OFF)
-if(ENABLE_CHANNEL_SIM_CUDA)
+option(CUDA_ENABLE "Enable CUDA accelerated channel simulation" OFF)
+if(CUDA_ENABLE)
    find_package(CUDA REQUIRED)
    find_package(CUDAToolkit REQUIRED)
    message(STATUS "CUDA explicitly enabled, building with GPU acceleration support.")
@@ -34,7 +34,7 @@ if(ENABLE_CHANNEL_SIM_CUDA)
        message(STATUS "CUDA Explicit Copy path enabled (default ATS was overridden).")
    endif()

-    add_compile_definitions(CHANNEL_SIM_CUDA)
+    add_compile_definitions(ENABLE_CUDA)
 endif()

 #########################################################
@@ -83,40 +83,25 @@ option(PACKAGING_COMMON "Will produce a package containing common target, config
 option(PACKAGING_USRP "Will produce a package containing usrp target, configuration files and docs" OFF)
 option(PACKAGING_PHYSIM "Will produce a package containing physim target, configuration files and docs" OFF)

+
 # Check if asn1c is installed, and check if it supports all options we need
 # a user can provide ASN1C_EXEC to override an asn1c to use (e.g., parallel
 # installation)
 find_program(ASN1C_EXEC_PATH asn1c HINTS /opt/asn1c/bin)
 set(ASN1C_EXEC ${ASN1C_EXEC_PATH} CACHE FILEPATH "path to asn1c executable")
-option(AUTO_DOWNLOAD_ASN1C "Automatically download asn1c if not found" OFF)
-if (ASN1C_EXEC)
-  check_option(${ASN1C_EXEC} -gen-APER ASN1C_EXEC)
-  check_option(${ASN1C_EXEC} -no-gen-UPER ASN1C_EXEC)
-  check_option(${ASN1C_EXEC} -no-gen-JER ASN1C_EXEC)
-  check_option(${ASN1C_EXEC} -no-gen-BER ASN1C_EXEC)
-  check_option(${ASN1C_EXEC} -no-gen-OER ASN1C_EXEC)
-  add_custom_target(asn1c DEPENDS ${ASN1C_EXEC})
-else ()
-  if (NOT AUTO_DOWNLOAD_ASN1C)
-    message(FATAL_ERROR "asn1c not found. Install it globally or activate AUTO_DOWNLOAD_ASN1C")
-  endif()
-  message(STATUS "Downloading and compile asn1c local in this build tree")
-  include(ExternalProject)
-  ExternalProject_Add(
-    asn1c_gen
-    GIT_REPOSITORY https://github.com/mouse07410/asn1c
-    GIT_TAG 940dd5fa9f3917913fd487b13dfddfacd0ded06e
-    GIT_REMOTE_UPDATE_STRATEGY CHECKOUT
-    BUILD_BYPRODUCTS ${CMAKE_BINARY_DIR}/bin/asn1c
-    BUILD_IN_SOURCE True
-    CONFIGURE_COMMAND autoreconf -i
-    BUILD_COMMAND ./configure --prefix ${CMAKE_BINARY_DIR}
-    COMMAND make -j8 CFLAGS=-fno-strict-aliasing -Wmisleading-indentation
-    STEP_TARGETS build
-  )
-  set(ASN1C_EXEC ${CMAKE_BINARY_DIR}/bin/asn1c)
-  add_custom_target(asn1c DEPENDS asn1c_gen)
+if(NOT ASN1C_EXEC)
+    message(FATAL_ERROR "No asn1c found!
+You might want to re-run ./build_oai -I
+Or provide a path to asn1c using
+./build_oai ... --cmake-opt -DASN1C_EXEC=/path/to/asn1c
+")
 endif()
+check_option(${ASN1C_EXEC} -gen-APER ASN1C_EXEC)
+check_option(${ASN1C_EXEC} -no-gen-UPER ASN1C_EXEC)
+check_option(${ASN1C_EXEC} -no-gen-JER ASN1C_EXEC)
+check_option(${ASN1C_EXEC} -no-gen-BER ASN1C_EXEC)
+check_option(${ASN1C_EXEC} -no-gen-OER ASN1C_EXEC)
+
 #########################################################
 # Base directories, compatible with legacy OAI building #
 #########################################################
@@ -155,17 +140,14 @@ add_boolean_option(AVX512 ${AUTODETECT_AVX512} "Whether AVX512 intrinsics is ava
 eval_boolean(AUTODETECT_AVX2 DEFINED CPUFLAGS AND CPUFLAGS MATCHES "avx2")
 add_boolean_option(AVX2 ${AUTODETECT_AVX2} "Whether AVX2 intrinsics is available on the host processor" ON)

-eval_boolean(AUTODETECT_GFNI DEFINED CPUFLAGS AND CPUFLAGS MATCHES "gfni")
-add_boolean_option(GFNI ${AUTODETECT_GFNI} "Whether GFNI intrinsics is available on the host processor" ON)
-
 message(STATUS "CPU architecture is ${CMAKE_SYSTEM_PROCESSOR}")
 if (CROSS_COMPILE)
  message(STATUS "setting as aarch64")
  set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -lgcc -lrt")
 elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
  # The following intrinsics are assumed to be available on any x86 system
-  # (avx, f16c, fma, mmx, pclmul, sse, sse2, sse3, xop)
-  set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_AVX_NATIVE -DSIMDE_X86_AVX_NATIVE -DSIMDE_X86_F16C_NATIVE -DSIMDE_X86_FMA_NATIVE -DSIMDE_X86_MMX_NATIVE -DSIMDE_X86_PCLMUL_NATIVE -DSIMDE_X86_SSE2_NATIVE -DSIMDE_X86_SSE3_NATIVE -DSIMDE_X86_SSE_NATIVE -DSIMDE_X86_XOP_HAVE_COM_ -DSIMDE_X86_XOP_NATIVE")
+  # (avx, f16c, fma, gnfi, mmx, pclmul, sse, sse2, sse3, xop)
+  set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_AVX_NATIVE -DSIMDE_X86_AVX_NATIVE -DSIMDE_X86_F16C_NATIVE -DSIMDE_X86_FMA_NATIVE -DSIMDE_X86_GFNI_NATIVE -DSIMDE_X86_MMX_NATIVE -DSIMDE_X86_PCLMUL_NATIVE -DSIMDE_X86_SSE2_NATIVE -DSIMDE_X86_SSE3_NATIVE -DSIMDE_X86_SSE_NATIVE -DSIMDE_X86_XOP_HAVE_COM_ -DSIMDE_X86_XOP_NATIVE")
  message(STATUS "AVX512 intrinsics are ${AVX512}")
  if(${AVX512})
    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_AVX512BW_NATIVE -DSIMDE_X86_AVX512F_NATIVE -DSIMDE_X86_AVX512VL_NATIVE -mavx512bw -march=skylake-avx512 -mtune=skylake-avx512")
@@ -176,17 +158,13 @@ elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
  if(${AVX2})
    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_AVX2_NATIVE -DSIMDE_X86_VPCLMULQDQ_NATIVE")
  endif()
-  message(STATUS "GFNI intrinsics are ${GFNI}")
-  if(${GFNI})
-    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_GFNI_NATIVE -mgfni")
-  endif()
-  if (CPUFLAGS MATCHES "sse4_1")
+  if (CPUINFO MATCHES "sse4_1")
    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSE4_1_NATIVE")
  endif()
-  if(CPUFLAGS MATCHES "sse4_2")
+  if(CPUINFO MATCHES "sse4_2")
    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSE4_2_NATIVE")
  endif()
-  if(CPUFLAGS MATCHES "ssse3")
+  if(CPUINFO MATCHES "ssse3")
    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSSE3_NATIVE")
  endif()
 elseif (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
@@ -228,9 +206,9 @@ if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
  set(commonOpts "${commonOpts} -Wno-packed-bitfield-compat")
 endif()
 # clang: suppress complaints about unused command line argument (-rdynamic only
-# used during linking) and "const member leaves the object uninitialized"
+# used during linking)
 if(CMAKE_C_COMPILER_ID STREQUAL "Clang" OR CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
-  set(commonOpts "${commonOpts} -Wno-unused-command-line-argument -Wno-default-const-init-field-unsafe")
+  set(commonOpts "${commonOpts} -Wno-unused-command-line-argument")
 endif()

 set(CMAKE_C_FLAGS
@@ -442,6 +420,7 @@ add_library(ngap
  ${NGAP_DIR}/ngap_gNB_pdu_session_management.c
  ${NGAP_DIR}/ngap_gNB_nnsf.c
  ${NGAP_DIR}/ngap_gNB_overload.c
+  ${NGAP_DIR}/ngap_gNB_trace.c
  ${NGAP_DIR}/ngap_gNB_ue_context.c
  ${NGAP_DIR}/ngap_gNB_NRPPa_transport_procedures.c
  )
@@ -730,15 +709,14 @@ target_link_libraries(SCHED_LIB PRIVATE asn1_lte_rrc_hdrs)
 set(SCHED_NR_SRC
  ${OPENAIR1_DIR}/SCHED_NR/phy_procedures_nr_gNB.c
  ${OPENAIR1_DIR}/SCHED_NR/nr_prach_procedures.c
-  ${OPENAIR1_DIR}/SCHED_NR/nr_ru_procedures.c
  ${OPENAIR1_DIR}/SCHED_NR/phy_frame_config_nr.c
 )
 add_library(SCHED_NR_LIB ${SCHED_NR_SRC})
 target_link_libraries(SCHED_NR_LIB PRIVATE asn1_nr_rrc_hdrs UTIL)
-target_link_libraries(SCHED_NR_LIB PRIVATE NFAPI_LIB) # some FAPI messages pack "subPDUs"

 set(SCHED_SRC_RU
  ${OPENAIR1_DIR}/SCHED/ru_procedures.c
+  ${OPENAIR1_DIR}/SCHED_NR/nr_ru_procedures.c
  ${OPENAIR1_DIR}/SCHED/prach_procedures.c
 )
 add_library(SCHED_RU_LIB ${SCHED_SRC_RU})
@@ -774,7 +752,6 @@ set(NFAPI_SRC
 add_library(NFAPI_LIB ${NFAPI_SRC})
 target_link_libraries(NFAPI_LIB PUBLIC nfapi_common)
 target_link_libraries(NFAPI_LIB PUBLIC nr_fapi_p5 nr_fapi_p7)
-target_link_libraries(NFAPI_LIB PRIVATE z)

 if(OAI_WLS)
  target_compile_definitions(NFAPI_LIB PRIVATE ENABLE_WLS)
@@ -849,7 +826,6 @@ set(PHY_NRLDPC_CODINGIF
 )

 add_library(dfts MODULE ${OPENAIR1_DIR}/PHY/TOOLS/oai_dfts.c ${OPENAIR1_DIR}/PHY/TOOLS/oai_dfts_neon.c)
-target_compile_options(dfts PRIVATE -fno-semantic-interposition)

 set(PHY_SRC_COMMON
  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools_common.c
@@ -890,6 +866,7 @@ set(PHY_SRC_COMMON
  ${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
  ${OPENAIR1_DIR}/PHY/TOOLS/get_sin_cos.c
  ${OPENAIR1_DIR}/PHY/TOOLS/oai_arith_operations.c
+  ${OPENAIR1_DIR}/PHY/log_tools.c
  )

 set(PHY_SRC
@@ -900,10 +877,6 @@ set(PHY_SRC
  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots_mbsfn.c
  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_coding.c
  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_modulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c  
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools.c
  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pbch.c
  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci.c
@@ -920,22 +893,22 @@ set(PHY_SRC
  )

 set(PHY_SRC_RU
-  ${OPENAIR1_DIR}/PHY/if4_tools.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if4_tools.c
  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/drs_modulation.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
  ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_ul.c
+  ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_nr.c
  ${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz.c
  ${OPENAIR1_DIR}/PHY/MODULATION/gen_75KHz.cpp
  ${OPENAIR1_DIR}/PHY/MODULATION/beamforming.c
  ${OPENAIR1_DIR}/PHY/MODULATION/compute_bf_weights.c
  ${OPENAIR1_DIR}/PHY/INIT/lte_init_ru.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach.c
-  )
-
-set(NR_PHY_SRC_RU
-  ${OPENAIR1_DIR}/PHY/MODULATION/nr_beamforming.c
-  ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_nr.c
  ${OPENAIR1_DIR}/PHY/INIT/nr_init_ru.c
-  ${OPENAIR1_DIR}/PHY/if4_tools.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach.c
+
  )

 set(PHY_SRC_UE
@@ -1025,6 +998,7 @@ set(PHY_SRC_UE
  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/pucch_rx.c
  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/srs_rx.c
  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_uci_tools_common.c
+  ${OPENAIR1_DIR}/PHY/phy_digital_beamforming.c
  )
  set(PHY_NR_UE_SRC
  ${OPENAIR1_DIR}/PHY/INIT/nr_parms.c
@@ -1095,7 +1069,7 @@ add_library(PHY_NR_COMMON ${PHY_NR_SRC_COMMON})
 target_link_libraries(PHY_NR_COMMON PUBLIC UTIL)

 add_library(PHY_NR ${PHY_NR_SRC})
-target_link_libraries(PHY_NR nr_phy_common nr_common nr_fapi_p5 polar smallblock ds)
+target_link_libraries(PHY_NR nr_phy_common nr_common nr_fapi_p5 polar smallblock)

 add_library(PHY_NR_NO_AVX_256 ${PHY_NR_SRC})
 target_link_libraries(PHY_NR_NO_AVX_256 nr_phy_common nr_common)
@@ -1107,8 +1081,6 @@ target_link_libraries(PHY_NR_UE PRIVATE asn1_nr_rrc_hdrs nr_phy_common nr_common
 add_library(PHY_RU ${PHY_SRC_RU})
 target_link_libraries(PHY_RU PRIVATE asn1_lte_rrc_hdrs UTIL)

-add_library(NR_PHY_RU ${NR_PHY_SRC_RU})
-
 #Layer 2 library
 #####################
 set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
@@ -1144,20 +1116,12 @@ set(NR_PDCP_SRC
  ${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_integrity_nia2.c
  ${OPENAIR2_DIR}/LAYER2/nr_pdcp/nr_pdcp_integrity_nia1.c
  ${OPENAIR2_DIR}/LAYER2/nr_pdcp/asn1_utils.c
-  )
-
-# gNB: PDCP + CU-CP/CU-UP interface
-set(NR_PDCP_SRC_GNB
-  ${NR_PDCP_SRC}
  openair2/LAYER2/nr_pdcp/cucp_cuup_handler.c
  openair2/LAYER2/nr_pdcp/cuup_cucp_if.c
  openair2/LAYER2/nr_pdcp/cuup_cucp_direct.c
  openair2/LAYER2/nr_pdcp/cuup_cucp_e1ap.c
  )

-# UE build: PDCP only; CU-CP/CU-UP interface is gNB-only.
-set(NR_PDCP_SRC_UE ${NR_PDCP_SRC})
-
 set(NR_SDAP_SRC
  ${OPENAIR2_DIR}/SDAP/nr_sdap/nr_sdap.c
  ${OPENAIR2_DIR}/SDAP/nr_sdap/nr_sdap_entity.c
@@ -1201,7 +1165,7 @@ set(L2_LTE_SRC
  )

 set(L2_NR_SRC
-  ${NR_PDCP_SRC_GNB}
+  ${NR_PDCP_SRC}
  ${NR_SDAP_SRC}
  ${NR_RRC_DIR}/rrc_gNB.c
  ${NR_RRC_DIR}/mac_rrc_dl_direct.c
@@ -1237,7 +1201,7 @@ set(L2_RRC_SRC_UE
  )

 set(NR_L2_SRC_UE
-  ${NR_PDCP_SRC_UE}
+  ${NR_PDCP_SRC}
  ${NR_SDAP_SRC}
  ${NR_UE_RRC_DIR}/L2_interface_ue.c
  ${NR_UE_RRC_DIR}/main_ue.c
@@ -1279,9 +1243,7 @@ set (MAC_NR_SRC
  ${NR_GNB_MAC_DIR}/gNB_scheduler.c
  ${NR_GNB_MAC_DIR}/gNB_scheduler_bch.c
  ${NR_GNB_MAC_DIR}/gNB_scheduler_dlsch.c
-  ${NR_GNB_MAC_DIR}/gNB_scheduler_dlsch_default_policies.c
  ${NR_GNB_MAC_DIR}/gNB_scheduler_ulsch.c
-  ${NR_GNB_MAC_DIR}/gNB_scheduler_ulsch_default_policies.c
  ${NR_GNB_MAC_DIR}/gNB_scheduler_primitives.c
  ${NR_GNB_MAC_DIR}/gNB_scheduler_phytest.c
  ${NR_GNB_MAC_DIR}/gNB_scheduler_uci.c
@@ -1383,7 +1345,6 @@ add_library(e1_if
 target_link_libraries(e1_if PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs asn1_f1ap SECURITY ${OPENSSL_LIBRARIES} e1ap GTPV1U)

 target_link_libraries(L2_NR PRIVATE f1ap x2ap s1ap ngap nr_rrc e1ap nr_rlc nr_common)
-target_compile_definitions(L2_NR PRIVATE PDCP_CUCP_CUUP)
 if(OAI_AERIAL)
    target_compile_definitions(L2_NR PRIVATE ENABLE_AERIAL)
 endif()
@@ -1391,6 +1352,7 @@ endif()
 add_library(L2_LTE_NR
  # temporary solution until 4G/5G code completely untangled (as evidenced by deletion of the following file)
  ${MAC_DIR}/dummy_functions.c
+  ${ENB_APP_SRC}
 )

 target_link_libraries(L2_LTE_NR PRIVATE f1ap s1ap nr_rrc)
@@ -1781,7 +1743,7 @@ target_link_libraries(lte-softmodem PRIVATE
  lte_rrc nr_rrc s1ap m2ap x2ap m3ap GTPV1U SECURITY UTIL SCTP_CLIENT MME_APP SCHED_LIB SCHED_RU_LIB
  PHY_COMMON PHY PHY_RU  L2 L2_LTE NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB MISC_NFAPI_LTE_LIB
  ${NAS_UE_LIB} ITTI SIMU radio_common softmodem_common
-  -Wl,--end-group dl)
+  -Wl,--end-group z dl)

 target_link_libraries(lte-softmodem PRIVATE pthread m CONFIG_LIB rt)
 target_link_libraries(lte-softmodem PRIVATE ${T_LIB})
@@ -1796,17 +1758,13 @@ add_executable(oairu
  ${OPENAIR_DIR}/executables/lte-ru.c
  ${OPENAIR_DIR}/executables/ru_control.c
  ${OPENAIR_DIR}/openair1/SCHED/phy_procedures_lte_common.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
  ${OPENAIR_DIR}/executables/main_ru.c
  ${OPENAIR_DIR}/common/utils/lte/prach_utils.c
 )
 target_link_libraries(oairu PRIVATE
  -Wl,--start-group
  SCHED_RU_LIB PHY_COMMON PHY_RU UTIL radio_common softmodem_common
-  -Wl,--end-group dl)
+  -Wl,--end-group z dl)

 target_link_libraries(oairu PRIVATE pthread m CONFIG_LIB rt ${T_LIB})
 target_link_libraries(oairu PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -1835,7 +1793,7 @@ target_link_libraries(lte-uesoftmodem PRIVATE
  SECURITY UTIL SCTP_CLIENT MME_APP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON
  PHY_UE PHY_RU L2_UE L2_LTE SIMU NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB MISC_NFAPI_LTE_LIB
  ${NAS_UE_LIB} ITTI radio_common softmodem_common
-  -Wl,--end-group dl)
+  -Wl,--end-group z dl)

 target_link_libraries(lte-uesoftmodem PRIVATE pthread m CONFIG_LIB rt)
 target_link_libraries(lte-uesoftmodem PRIVATE ${T_LIB})
@@ -1851,12 +1809,11 @@ add_executable(nr-oru
  ${OPENAIR_DIR}/openair1/PHY/INIT/nr_parms.c
  ${OPENAIR_DIR}/openair1/SCHED_NR/phy_frame_config_nr.c
  ${OPENAIR_DIR}/openair1/SCHED_NR/nr_prach_procedures.c
-  ${OPENAIR_DIR}/openair1/SCHED_NR/nr_ru_procedures.c
  ${OPENAIR_DIR}/openair1/SCHED/phy_procedures_lte_common.c
  ${OPENAIR_DIR}/executables/main_nr_ru.c
 )
 target_link_libraries(nr-oru PRIVATE
-  UTIL NR_PHY_RU PHY_NR shlib_loader dl
+  UTIL SCHED_RU_LIB PHY_COMMON PHY_RU PHY_NR shlib_loader z dl
  radio_common softmodem_common)
 target_link_libraries(nr-oru PRIVATE pthread m CONFIG_LIB rt ${T_LIB} utils
  barrier actor)
@@ -1880,12 +1837,12 @@ add_executable(nr-softmodem

 target_link_libraries(nr-softmodem PRIVATE
  -Wl,--start-group
-  UTIL SCTP_CLIENT SCHED_LIB SCHED_NR_LIB PHY_NR PHY PHY_NR_COMMON NR_PHY_RU GTPV1U SECURITY
-  ITTI ${NAS_UE_LIB} nr_rrc
+  UTIL SCTP_CLIENT SCHED_LIB SCHED_RU_LIB SCHED_NR_LIB PHY_NR PHY PHY_COMMON PHY_NR_COMMON PHY_RU GTPV1U SECURITY
+  ITTI ${NAS_UE_LIB} lte_rrc nr_rrc
  ngap s1ap L2_LTE_NR L2_NR MAC_NR_COMMON NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB SIMU
  x2ap f1ap m2ap m3ap e1ap radio_common
  time_management softmodem_common
-  -Wl,--end-group dl)
+  -Wl,--end-group z dl)

 target_link_libraries(nr-softmodem PRIVATE pthread m CONFIG_LIB rt)
 target_link_libraries(nr-softmodem PRIVATE ${T_LIB})
@@ -1916,7 +1873,7 @@ add_executable(nr-cuup
  executables/nr-cuup.c
  ${NR_RRC_DIR}/rrc_gNB_UE_context.c
  ${OPENAIR2_DIR}/E1AP/e1ap_setup.c
-  ${NR_PDCP_SRC_GNB}
+  ${NR_PDCP_SRC}
  ${NR_SDAP_SRC}
  )

@@ -1925,9 +1882,8 @@ target_link_libraries(nr-cuup PRIVATE
                      GTPV1U e1ap f1ap
                      time_management softmodem_common
                      alg
-                      dl pthread ${T_LIB})
+                      z dl pthread ${T_LIB})
 target_link_libraries(nr-cuup PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
-target_compile_definitions(nr-cuup PRIVATE PDCP_CUCP_CUUP)
 if(E2_AGENT)
  target_link_libraries(nr-cuup PRIVATE e2_agent e2_agent_arg e2_ran_func_cuup)
  target_compile_definitions(nr-cuup PRIVATE ${E2AP_VERSION} ${KPM_VERSION} E2_AGENT)
@@ -1950,11 +1906,11 @@ add_executable(nr-uesoftmodem

 target_link_libraries(nr-uesoftmodem PRIVATE
  -Wl,--start-group
-  nr_rrc SECURITY UTIL SCHED_NR_UE_LIB
-  PHY_NR_COMMON PHY_NR_UE NR_L2_UE MAC_NR_COMMON NFAPI_LIB
+  nr_rrc SECURITY UTIL SCHED_RU_LIB SCHED_NR_UE_LIB
+  PHY_COMMON PHY_NR_COMMON PHY_NR_UE NR_L2_UE MAC_NR_COMMON NFAPI_LIB
  ITTI SIMU radio_common
  time_management softmodem_common
-  -Wl,--end-group dl)
+  -Wl,--end-group z dl)

 target_link_libraries(nr-uesoftmodem PRIVATE pthread m CONFIG_LIB rt nr_ue_phy_meas)
 target_link_libraries(nr-uesoftmodem PRIVATE ${T_LIB})
@@ -2028,14 +1984,14 @@ target_link_libraries(physim_common PRIVATE UTIL)

 add_executable(nr_dlschsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlschsim.c)
 target_link_libraries(nr_dlschsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
  m pthread ${T_LIB} ITTI dl physim_common
  )
 target_link_libraries(nr_dlschsim PRIVATE asn1_nr_rrc_hdrs)

 add_executable(nr_pbchsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pbchsim.c)
 target_link_libraries(nr_pbchsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
  m pthread ${T_LIB} ITTI dl physim_common
 )
 target_link_libraries(nr_pbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -2045,14 +2001,14 @@ add_executable(nr_psbchsim
  ${NFAPI_USER_DIR}/nfapi.c
  )
 target_link_libraries(nr_psbchsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB -Wl,--end-group
  m pthread ${T_LIB} ITTI dl physim_common softmodem_common
  )
 target_link_libraries(nr_psbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)

 add_executable(nr_pucchsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pucchsim.c)
 target_link_libraries(nr_pucchsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
  m pthread ${T_LIB} ITTI dl physim_common
 )
 target_link_libraries(nr_pucchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -2064,15 +2020,15 @@ add_executable(nr_dlsim
  ${PHY_INTERFACE_DIR}/queue_t.c
  )
 target_link_libraries(nr_dlsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common NR_L2_UE
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
+  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common
  softmodem_common
  )
 target_link_libraries(nr_dlsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)

 add_executable(nr_prachsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/prachsim.c)
 target_link_libraries(nr_prachsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR NR_PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB CONFIG_LIB -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB CONFIG_LIB -Wl,--end-group
  m pthread ${T_LIB} ITTI dl physim_common)
 target_link_libraries(nr_prachsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)

@@ -2080,7 +2036,7 @@ add_executable(nr_ulschsim
  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulschsim.c
  )
 target_link_libraries(nr_ulschsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
  m pthread ${T_LIB} ITTI dl physim_common
 )
 target_link_libraries(nr_ulschsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -2093,8 +2049,8 @@ add_executable(nr_ulsim
  )

 target_link_libraries(nr_ulsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common softmodem_common NR_L2_UE
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
+  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common softmodem_common
  )
 target_link_libraries(nr_ulsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)

@@ -2104,17 +2060,17 @@ add_executable(nr_srssim
  )

 target_link_libraries(nr_srssim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON -Wl,--end-group
  m pthread ITTI dl nr_ue_phy_meas physim_common softmodem_common
  )

-if(ENABLE_CHANNEL_SIM_CUDA)
+if(CUDA_ENABLE)
  if (TARGET oai_cuda_lib)
      target_link_libraries(nr_dlsim PRIVATE oai_cuda_lib)
      target_link_libraries(nr_ulsim PRIVATE oai_cuda_lib)

-      target_compile_definitions(nr_dlsim PRIVATE CHANNEL_SIM_CUDA)
-      target_compile_definitions(nr_ulsim PRIVATE CHANNEL_SIM_CUDA)
+      target_compile_definitions(nr_dlsim PRIVATE ENABLE_CUDA)
+      target_compile_definitions(nr_ulsim PRIVATE ENABLE_CUDA)
  endif()
 endif()

@@ -2173,7 +2129,7 @@ if (${T_TRACER})
        SECURITY SCHED_LIB SCHED_NR_LIB SCHED_RU_LIB SCHED_UE_LIB SCHED_NR_UE_LIB
        NFAPI_LIB NFAPI_PNF_LIB NFAPI_VNF_LIB NFAPI_USER_LIB
        MISC_NFAPI_LTE_LIB
-        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU NR_PHY_RU
+        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU
        L2 L2_LTE L2_NR L2_LTE_NR L2_UE NR_L2_UE MAC_NR_COMMON MAC_UE_NR ngap
        GTPV1U SCTP_CLIENT MME_APP LIB_NAS_UE SIMU
        dfts config_internals nr_common crc_byte)
--- a/CONTRIBUTING.md
+++ b/CONTRIBUTING.md
@@ -1,6 +1,6 @@
 <!-- SPDX-License-Identifier: CC-BY-4.0 -->

-# Contributing to OpenAirInterface
+# Contributing to OpenAirInterface #

 We want to make contributing to this project as easy and transparent as possible.

@@ -11,10 +11,10 @@ Please refer to the steps described on our website: [How to contribute to OAI](h
   if you do not have any.
   - We recommend that you register with a professional or student email address.
   - If your email domain (`@domain.com`) is not whitelisted, please contact us
-     (mailto:oaicicdteam@openairinterface.org).
+     (mailto:contact@openairinterface.org).
   - Eurecom GitLab does NOT accept public email domains.
 3. Provide the OAI team with the **username** of this account to
-   (mailto:oaicicdteam@openairinterface.org) ; we will give you the developer
+   (mailto:contact@openairinterface.org) ; we will give you the developer
   rights on this repository.
 4. The contributing policies are described in the [corresponding documentation
   page](doc/code-style-contrib.md).
@@ -24,43 +24,8 @@ Please refer to the steps described on our website: [How to contribute to OAI](h
     request from a forked repository.
      * This decision was made for the license reasons.
      * The Continuous Integration will reject your merge request.
-5. Mandatory signing of all the commits using the email address used for CLA.

-## Commit Guidelines
-
-### Signing Commits
-
-To sign commits:
-
-You can also get the verified label
-on your commits via using [SSH KEYS or GPG KEYS](https://docs.gitlab.com/user/project/repository/signed_commits/)
-
-```
-# Edit .git/config in the git repository you are working on
-# Add the user section
-[user]
-    name = YOUR NAME
-    email = YOUR EMAIL ADDRESS
-
-# If you use a signing key, use the below configuration instead
-[user]
-    name = YOUR NAME
-    email = YOUR EMAIL ADDRESS
-    signingkey = LOCATION OF SSH KEYS or GPG KEY
-
-[gpg]
-    format = ssh
-
-[commit]
-    gpgsign = true
-```
-
-> **NOTE:** If your commits are not signed the CI framework will not accept the MR.
-
-For more information regarding contribution guidelines
-please check [this document](doc/code-style-contrib.md)
-
-## License
+# License #

 By contributing to OpenAirInterface, you agree that your contributions will be
 licensed under
--- a/8
+++ b/8
@@ -84,11 +84,3 @@ Nuand: https://github.com/Nuand/bladeRF/tree/master?tab=License-1-ov-file

 Credits for https://github.com/pothosware/SoapySDR
 Pothosware: BSL 1.0 License
-
-Credits for https://github.com/zeromq/libzmq
-ZeroMQ authors: Mozilla Public License Version 2.0
-
-Credits for source code:
-  - radio/zmq/zmq_imported.cpp
-  - radio/zmq/zmq_imported.h
-Software Radio Systems Limited: BSD-3-Clause-Open-MPI
--- a/README.md
+++ b/README.md
@@ -8,9 +8,8 @@
    <a href="https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/master/LICENSE"><img src="https://img.shields.io/badge/license-CSSL--v1.0-blue" alt="License"></a>
    <a href="https://releases.ubuntu.com/22.04/"><img src="https://img.shields.io/badge/OS-Ubuntu22-Green" alt="Supported OS Ubuntu 22"></a>
    <a href="https://releases.ubuntu.com/24.04/"><img src="https://img.shields.io/badge/OS-Ubuntu24-Green" alt="Supported OS Ubuntu 24"></a>
-    <a href="https://releases.ubuntu.com/26.04/"><img src="https://img.shields.io/badge/OS-Ubuntu26-Green" alt="Supported OS Ubuntu 26"></a>
    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RHEL9"></a>
-    <a href="https://getfedora.org/en/workstation/"><img src="https://img.shields.io/badge/OS-Fedore44-Green" alt="Supported OS Fedora 44"></a>
+    <a href="https://getfedora.org/en/workstation/"><img src="https://img.shields.io/badge/OS-Fedore41-Green" alt="Supported OS Fedora 43"></a>
 </p>

 <p align="center">
--- a/ci-scripts/Jenkinsfile
+++ b/ci-scripts/Jenkinsfile
@@ -20,13 +20,12 @@ if (params.LockResources != null && params.LockResources.trim().length() > 0)
 // Global Parameters. Normally they should be populated when the master job
 // triggers the slave job with parameters

-def INTERNAL_REPO = "asterix:/home/git/openairinterface5g.git"
-def sourceBranch = params.sourceBranch ?: env.GIT_BRANCH
-def targetBranch = params.targetBranch ?: 'develop'
-def commitID = params.sourceCommit ?: env.GIT_COMMIT
-def testRepository = params.customRepository ?: INTERNAL_REPO
-def testBranch = params.customBranch ?: "${sourceBranch}-${commitID}"
-def mergeWithTarget = params.mergeWithTarget ?: false
+def sourceRepository = params.eNB_Repository ?: env.GIT_URL
+def sourceBranch = params.eNB_Branch ?: env.GIT_BRANCH
+def targetRepository = params.Target_Repository ?: sourceRepository
+def targetBranch = params.eNB_TargetBranch ?: 'develop'
+def commitID = params.eNB_CommitID ?: env.GIT_COMMIT
+def is_MR = params.eNB_mergeRequest ?: false

 def flexricOption = ""
 def runWithOC = false
@@ -51,7 +50,7 @@ pipeline {
          JOB_TIMESTAMP = sh(returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"').trim()
        }
        // update the build name and description
-        buildName "${params.requestNumber}"
+        buildName "${params.eNB_MR}"
        buildDescription "Branch : ${sourceBranch}"
      }
    }
@@ -65,12 +64,12 @@ pipeline {
            echo "no LockResources given"
            allParametersPresent = false
          }
-          if (params.workspace == null) {
-            echo "no workspace given"
+          if (params.eNB_SourceCodePath == null) {
+            echo "no eNB_SourceCodePath given"
            allParametersPresent = false
          }
          if (params.OC_Credentials != null) {
-            echo "This pipeline is configured to run with Openshift Cluster."
+            echo "This pipeline is configured to run with Opensift Cluster."
            runWithOC = true
            if (params.OC_ProjectName == null) {
              echo "no OC_ProjectName given"
@@ -85,11 +84,21 @@ pipeline {
          }

          echo "CI executor node    :   ${pythonExecutor}"
-          echo "Testing Repository  :   ${testRepository}"
-          echo "Testing Branch      :   ${testBranch}"
+          echo "Source Repository   :   ${sourceRepository}"
+          echo "Source Branch       :   ${sourceBranch}"
+          echo "Target Repository   :   ${targetRepository}"
+          echo "Target Branch       :   ${targetBranch}"
+          echo "Commit ID           :   ${commitID}"

          if (allParametersPresent) {
            echo '\u2705 \u001B[94m All parameters are present\u001B[0m'
+            if (is_MR) {
+              sh "git fetch"
+              sh "./ci-scripts/doGitLabMerge.sh --src-branch ${sourceBranch} --src-commit ${commitID} --target-branch ${targetBranch} --target-commit latest"
+            } else {
+              sh "git fetch"
+              sh "git checkout -f ${commitID}"
+            }
          } else {
            echo "\u274C Some parameters are missing"
            sh "./ci-scripts/fail.sh"
@@ -112,21 +121,28 @@ pipeline {
              }
            }
            sh """
-              python3 main.py --mode=InitiateHtml --repository=${testRepository} \
-                              --branch=${testBranch} --commitID=${commitID} \
-                              ${mainPythonAllXmlFiles}
+              python3 main.py --mode=InitiateHtml --ranRepository=${targetRepository} \
+                              --ranBranch=${sourceBranch} --ranCommitID=${commitID} \
+                              --ranAllowMerge=${is_MR} --ranTargetBranch=${targetBranch} \
+                              ${flexricOption} ${mainPythonAllXmlFiles}
            """
            if (runWithOC) {
              withCredentials([usernamePassword(credentialsId: "${params.OC_Credentials}", usernameVariable: 'OC_Username', passwordVariable: 'OC_Password')]) {
+                sh """
+                  python3 main.py --mode=InitiateHtml --ranRepository=${targetRepository} \
+                                  --ranBranch=${sourceBranch} --ranCommitID=${commitID} \
+                                  --ranAllowMerge=${is_MR} --ranTargetBranch=${targetBranch} \
+                                  ${flexricOption} ${mainPythonAllXmlFiles}
+                """
                for (xmlFile in myXmlTestSuite) {
                  if (fileExists(xmlFile)) {
                    try {
                      timeout (time: 60, unit: 'MINUTES') {
                        sh """
-                          python3 main.py --mode=TesteNB --repository=${testRepository} \
-                                          --branch=${testBranch} \
-                                          --ranAllowMerge=${mergeWithTarget} --targetBranch=${targetBranch} \
-                                          --workspace=${params.workspace} --XMLTestFile=${xmlFile} \
+                          python3 main.py --mode=TesteNB --ranRepository=${targetRepository} \
+                                          --ranBranch=${sourceBranch} --ranCommitID=${commitID} \
+                                          --ranAllowMerge=${is_MR} --ranTargetBranch=${targetBranch} \
+                                          --eNBSourceCodePath=${params.eNB_SourceCodePath} --XMLTestFile=${xmlFile} \
                                          --OCUserName=${OC_Username} --OCPassword=${OC_Password} --OCProjectName=${OC_ProjectName} \
                                          ${flexricOption}
                        """
@@ -144,10 +160,10 @@ pipeline {
                  try {
                    timeout (time: 60, unit: 'MINUTES') {
                      sh """
-                        python3 main.py --mode=TesteNB --repository=${testRepository} \
-                                        --branch=${testBranch} \
-                                        --ranAllowMerge=${mergeWithTarget} --targetBranch=${targetBranch} \
-                                        --workspace=${params.workspace} --XMLTestFile=${xmlFile} \
+                        python3 main.py --mode=TesteNB --ranRepository=${targetRepository} \
+                                        --ranBranch=${sourceBranch} --ranCommitID=${commitID} \
+                                        --ranAllowMerge=${is_MR} --ranTargetBranch=${targetBranch} \
+                                        --eNBSourceCodePath=${params.eNB_SourceCodePath} --XMLTestFile=${xmlFile} \
                                        ${flexricOption}
                      """
                    }
--- a/ci-scripts/Jenkinsfile-GitLab-Container
+++ b/ci-scripts/Jenkinsfile-GitLab-Container
@@ -87,20 +87,9 @@ pipeline {
            // since a bit, in push events, gitlabUserEmail is not populated
            gitCommitAuthorEmailAddr = env.gitlabUserEmail
            echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
-            // Validate MR commits: checks for missing Signed-off-by and merge commits
-            def mrValidationLog = "signedCommit_${env.BUILD_NUMBER}.log"
-            def mrValidationExitCode = sh(
-                script: "bash ./ci-scripts/pre-ci-check.sh -s origin/${env.gitlabSourceBranch} -t origin/${env.gitlabTargetBranch} > ${mrValidationLog} 2>&1",
-                returnStatus: true
-            )
-            def mrValidationMessage = readFile(mrValidationLog).trim()
-            sh "rm -f ${mrValidationLog}"
-            if (mrValidationExitCode >= 1) {
-              addGitLabMRComment comment: "${mrValidationMessage}"
-            }
-            if (mrValidationExitCode >= 2) {
-              error("${mrValidationMessage}")
-            }
+            // GitLab-Jenkins plugin integration is lacking to perform the merge by itself
+            // Doing it manually --> it may have merge conflicts
+            sh "./ci-scripts/doGitLabMerge.sh --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
          } else {
            echo "Git Branch    is ${GIT_BRANCH}"
            echo "Git Commit    is ${GIT_COMMIT}"
@@ -111,19 +100,29 @@ pipeline {
          }
        }
      }
+      post {
+        failure {
+          script {
+            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Merge Conflicts -- Cannot perform CI"
+            addGitLabMRComment comment: message
+            currentBuild.result = 'FAILURE'
+          }
+        }
+      }
    }
    stage ("Local-Repo-Push") {
      steps {
        script {
-          triggerSlaveJob ('RAN-Local-Repo-Push', 'Local-Repo-Push')
+          catchError(buildResult: 'FAILURE', stageResult: 'FAILURE') {
+            triggerSlaveJob ('RAN-Local-Repo-Push', 'Local-Repo-Push')
+          }
        }
      }
      post {
        failure {
          script {
-            def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Cannot perform CI - merge validation failed (merge conflict, git operation failure, or internal CI error)."
-            addGitLabMRComment comment: message
-            currentBuild.result = 'FAILURE'
+            echo "Push to local repository KO"
+            failingStages += '\n * RAN-Local-Repo-Push'
          }
        }
      }
@@ -220,6 +219,28 @@ pipeline {
            }
          }
        }
+        stage ("cppcheck") {
+          steps {
+            script {
+              triggerSlaveJob ('RAN-cppcheck', 'cppcheck')
+            }
+          }
+          post {
+            always {
+              script {
+                // Using a unique variable name for each test stage to avoid overwriting on a global variable
+                // due to parallel-time concurrency
+                cppcheckStatus = finalizeSlaveJob('RAN-cppcheck')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+                failingStages += cppcheckStatus
+              }
+            }
+          }
+        }
        stage ("ARM-Cross-Compile") {
          steps {
            script {
@@ -749,29 +770,6 @@ pipeline {
            }
          }
        }
-        stage ("SA-FHI72-MPLANE-CN5G") {
-          when { expression {do5Gtest} }
-          steps {
-            script {
-              triggerSlaveJob ('RAN-SA-FHI72-MPLANE-CN5G', 'SA-FHI72-MPLANE-CN5G')
-            }
-          }
-          post {
-            always {
-              script {
-                // Using a unique variable name for each test stage to avoid overwriting on a global variable
-                // due to parallel-time concurrency
-                saFHI72MplaneStatus = finalizeSlaveJob('RAN-SA-FHI72-MPLANE-CN5G')
-              }
-            }
-            failure {
-              script {
-                currentBuild.result = 'FAILURE'
-                failingStages += saFHI72MplaneStatus
-              }
-            }
-          }
-        }
        stage ("SA-Handover-CN5G") {
          when { expression {do5Gtest} }
          steps {
@@ -880,19 +878,12 @@ def triggerSlaveJob (jobName, gitlabStatusName) {
  def localStatus = build job: jobName,
    parameters: [
      string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
-      string(name: 'targetRepo', value: String.valueOf(GIT_URL)),
      string(name: 'SourceRepo', value: String.valueOf(env.gitlabSourceRepoHttpUrl)),
-      string(name: 'sourceRepo', value: String.valueOf(env.gitlabSourceRepoHttpUrl)),
      string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
-      string(name: 'sourceBranch', value: String.valueOf(env.gitlabSourceBranch)),
      string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
-      string(name: 'sourceCommit', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
      string(name: 'eNB_MR', value: String.valueOf(MR_NUMBER)),
-      string(name: 'requestNumber', value: String.valueOf(MR_NUMBER)),
      booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
-      booleanParam(name: 'mergeWithTarget', value: "MERGE".equals(env.gitlabActionType)),
-      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch)),
-      string(name: 'targetBranch', value: String.valueOf(env.gitlabTargetBranch))
+      string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
    ], propagate: false
  def localResult = localStatus.getResult()
  echo "${jobName} Slave Job status is ${localResult}"
@@ -907,13 +898,14 @@ def triggerSlaveJob (jobName, gitlabStatusName) {

 def triggerCN5GSlaveJob (jobName, gitlabStatusName) {
  if ("MERGE".equals(env.gitlabActionType)) {
-    shaOne = sh returnStdout: true, script: 'git log -1 --pretty=format:"%H" ' + env.gitlabMergeRequestLastCommit
-    shaOne = shaOne.trim()
-    fullRanTag = OAI_Registry + '/oai-gnb:' + env.gitlabSourceBranch + '-' + shaOne
+    shortenShaOne = sh returnStdout: true, script: 'git log -1 --pretty=format:"%h" --abbrev=8 ' + env.gitlabMergeRequestLastCommit
+    shortenShaOne = shortenShaOne.trim()
+    branchName = env.gitlabSourceBranch.replaceAll("/", "-").trim()
+    fullRanTag = OAI_Registry + '/oai-gnb:' + env.gitlabSourceBranch + '-' + shortenShaOne
  } else {
-    shaOne = sh returnStdout: true, script: 'git log -1 --pretty=format:"%H" ' + env.GIT_COMMIT
-    shaOne = shaOne.trim()
-    fullRanTag = OAI_Registry + '/oai-gnb:develop-' + shaOne
+    shortenShaOne = sh returnStdout: true, script: 'git log -1 --pretty=format:"%h" --abbrev=8 ' + env.GIT_COMMIT
+    shortenShaOne = shortenShaOne.trim()
+    fullRanTag = OAI_Registry + '/oai-gnb:develop-' + shortenShaOne
  }
  // Workaround for the "cancelled" GitLab pipeline notification
  // The slave job is triggered with the propagate false so the following commands are executed
--- a/ci-scripts/Jenkinsfile-push-local-repo
+++ b/ci-scripts/Jenkinsfile-push-local-repo
@@ -27,26 +27,21 @@ pipeline {
      steps {
        script {
          def missingParams = []
-          if (!params.sourceRepo?.trim())   { missingParams << 'sourceRepo' }
-          if (!params.sourceBranch?.trim())   { missingParams << 'sourceBranch' }
-          if (!params.sourceCommit?.trim()) { missingParams << 'sourceCommit' }
-          if (params.mergeWithTarget) {
-            if (!params.targetRepo?.trim())   { missingParams << 'targetRepo' }
-            if (!params.targetBranch?.trim()) { missingParams << 'targetBranch' }
-          }
+          if (!params.SourceRepo?.trim())       { missingParams << 'SourceRepo' }
+          if (!params.eNB_Branch?.trim())       { missingParams << 'eNB_Branch' }
+          if (!params.eNB_CommitID?.trim())     { missingParams << 'eNB_CommitID' }
+          if (!params.eNB_TargetBranch?.trim()) { missingParams << 'eNB_TargetBranch' }
+          if (!params.eNB_Repository?.trim())   { missingParams << 'eNB_Repository' }

          if (missingParams) {
            error "Missing required parameters: ${missingParams.join(', ')}"
          }

-          echo "Source Repo   : ${params.sourceRepo}"
-          echo "Source Branch : ${params.sourceBranch}"
-          echo "Source Commit : ${params.sourceCommit}"
-          echo "Merge         : ${params.mergeWithTarget}"
-          if (params.mergeWithTarget) {
-            echo "Target Branch : ${params.targetBranch}"
-            echo "Target Repo   : ${params.targetRepo}"
-          }
+          echo "Source Repo   : ${params.SourceRepo}"
+          echo "Source Branch : ${params.eNB_Branch}"
+          echo "Source Commit : ${params.eNB_CommitID}"
+          echo "Target Branch : ${params.eNB_TargetBranch}"
+          echo "Target Repo   : ${params.eNB_Repository}"
        }
      }
    }
@@ -56,7 +51,6 @@ pipeline {
          git config user.email "jenkins@openairinterface.org"
          git config user.name "OAI Jenkins"
          git remote remove source || true
-          git remote remove target || true
          git remote remove internal-repo || true
        """
      }
@@ -64,38 +58,31 @@ pipeline {
    stage('Add source repo & fetch branches') {
      steps {
        sh """
-          git remote add source ${params.sourceRepo} || true
-          git fetch source ${params.sourceBranch}
+          git remote add source ${params.SourceRepo} || true
+          git fetch source ${params.eNB_Branch}
+          git fetch origin ${params.eNB_TargetBranch}
        """
-        script {
-          if (params.mergeWithTarget) {
-            sh """
-              git remote add target ${params.targetRepo} || true
-              git fetch target ${params.targetBranch}
-            """
-          }
-        }
      }
    }
    stage('Create temporary branch for CI') {
      steps {
        script {
-          env.NEW_BRANCH = "${params.sourceBranch}-${params.sourceCommit}"
+          def shortCommit = params.eNB_CommitID.take(8)
+          env.NEW_BRANCH = "${params.eNB_Branch}-${shortCommit}"
          echo "New branch: ${env.NEW_BRANCH}"
        }
        sh """
          # Checkout source commit
-          git checkout -B ${env.NEW_BRANCH} ${params.sourceCommit}
+          git checkout -B ${env.NEW_BRANCH} ${params.eNB_CommitID}
        """
      }
    }
    stage('Merge target into source') {
-      when { expression { return params.mergeWithTarget } }
      steps {
        sh """
-          echo "Merging target branch ${params.targetBranch} into source branch ${env.NEW_BRANCH}"
-          if ! git merge --ff target/${params.targetBranch} \
-            -m "Merge ${params.targetBranch} into ${params.sourceBranch} for CI"; then
+          echo "Merging target branch ${params.eNB_TargetBranch} into source branch ${env.NEW_BRANCH}"
+          if ! git merge --ff origin/${params.eNB_TargetBranch} \
+            -m "Merge ${params.eNB_TargetBranch} into ${params.eNB_Branch} for CI"; then
            echo "Merge conflicts detected. Aborting."
            git merge --abort || true
            exit 1
--- a/ci-scripts/Jenkinsfile-push-registry
+++ b/ci-scripts/Jenkinsfile-push-registry
@@ -56,7 +56,7 @@ pipeline {
              echo "Forced Tag is ${WEEK_TAG}"
            }
          }
-          WEEK_SHA = sh returnStdout: true, script: 'git log -n1 --pretty=format:"%H" origin/develop'
+          WEEK_SHA = sh returnStdout: true, script: 'git log -n1 --pretty=format:"%h" origin/develop | cut -c 1-8'
          WEEK_SHA = WEEK_SHA.trim()

          withCredentials([
--- a/ci-scripts/args_parse.py
+++ b/ci-scripts/args_parse.py
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: LicenseRef-CSSL-1.0

 #---------------------------------------------------------------------
-# Python for CI testing
+# Python for CI of OAI-eNB + COTS-UE
 #
 #   Required Python Version
 #     Python 3.x
@@ -22,7 +22,7 @@ import constants as CONST
 #-----------------------------------------------------------


-def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,CLUSTER):
+def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):

    force_local = False
    date_fmt = None
@@ -44,55 +44,80 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,CLUSTER):
        elif re.match(r'^\-\-mode=(.+)$', myArgv, re.IGNORECASE):
            matchReg = re.match(r'^\-\-mode=(.+)$', myArgv, re.IGNORECASE)
            mode = matchReg.group(1)
-        elif re.match(r'^\-\-repository=(.+)$|^\-\-ranRepository=(.+)$', myArgv, re.IGNORECASE):
-            if re.match(r'^\-\-repository=(.+)$', myArgv, re.IGNORECASE):
-                matchReg = re.match(r'^\-\-repository=(.+)$', myArgv, re.IGNORECASE)
+        elif re.match(r'^\-\-eNBRepository=(.+)$|^\-\-ranRepository(.+)$', myArgv, re.IGNORECASE):
+            if re.match(r'^\-\-eNBRepository=(.+)$', myArgv, re.IGNORECASE):
+                matchReg = re.match(r'^\-\-eNBRepository=(.+)$', myArgv, re.IGNORECASE)
            else:
                matchReg = re.match(r'^\-\-ranRepository=(.+)$', myArgv, re.IGNORECASE)
-            CiTestObj.repository = matchReg.group(1)
-            RAN.repository=matchReg.group(1)
-            HTML.repository=matchReg.group(1)
-            CONTAINERS.repository=matchReg.group(1)
-            CLUSTER.repository=matchReg.group(1)
-        elif re.match(r'^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE):
-            matchReg = re.match(r'^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE)
+            CiTestObj.ranRepository = matchReg.group(1)
+            RAN.ranRepository=matchReg.group(1)
+            HTML.ranRepository=matchReg.group(1)
+            CONTAINERS.ranRepository=matchReg.group(1)
+            SCA.ranRepository=matchReg.group(1)
+            CLUSTER.ranRepository=matchReg.group(1)
+        elif re.match(r'^\-\-eNB_AllowMerge=(.+)$|^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE):
+            if re.match(r'^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE):
+                matchReg = re.match(r'^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE)
+            else:
+                matchReg = re.match(r'^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE)
            doMerge = matchReg.group(1)
            if ((doMerge == 'true') or (doMerge == 'True')):
-                RAN.merge=True
-                CONTAINERS.merge=True
-                CLUSTER.merge=True
-        elif re.match(r'^\-\-branch=(.+)$|^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE):
-            if re.match(r'^\-\-branch=(.+)$', myArgv, re.IGNORECASE):
-                matchReg = re.match(r'^\-\-branch=(.+)$', myArgv, re.IGNORECASE)
+                CiTestObj.ranAllowMerge = True
+                RAN.ranAllowMerge=True
+                HTML.ranAllowMerge=True
+                CONTAINERS.ranAllowMerge=True
+                SCA.ranAllowMerge=True
+                CLUSTER.ranAllowMerge=True
+        elif re.match(r'^\-\-eNBBranch=(.+)$|^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE):
+            if re.match(r'^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE):
+                matchReg = re.match(r'^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE)
            else:
                matchReg = re.match(r'^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE)
-            CiTestObj.branch = matchReg.group(1)
-            RAN.branch=matchReg.group(1)
-            HTML.branch=matchReg.group(1)
-            CONTAINERS.branch=matchReg.group(1)
-            CLUSTER.branch=matchReg.group(1)
-        elif re.match(r'^\-\-commitID=(.*)$|^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE):
-            if re.match(r'^\-\-commitID=(.*)$', myArgv, re.IGNORECASE):
-                matchReg = re.match(r'^\-\-commitID=(.*)$', myArgv, re.IGNORECASE)
+            CiTestObj.ranBranch = matchReg.group(1)
+            RAN.ranBranch=matchReg.group(1)
+            HTML.ranBranch=matchReg.group(1)
+            CONTAINERS.ranBranch=matchReg.group(1)
+            SCA.ranBranch=matchReg.group(1)
+            CLUSTER.ranBranch=matchReg.group(1)
+        elif re.match(r'^\-\-eNBCommitID=(.*)$|^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE):
+            if re.match(r'^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE):
+                matchReg = re.match(r'^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE)
            else:
                matchReg = re.match(r'^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE)
-            HTML.commitID=matchReg.group(1)
-        elif re.match(r'^\-\-targetBranch=(.*)$|^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE):
-            if re.match(r'^\-\-targetBranch=(.*)$', myArgv, re.IGNORECASE):
-                matchReg = re.match(r'^\-\-targetBranch=(.*)$', myArgv, re.IGNORECASE)
+            CiTestObj.ranCommitID = matchReg.group(1)
+            RAN.ranCommitID=matchReg.group(1)
+            HTML.ranCommitID=matchReg.group(1)
+            CONTAINERS.ranCommitID=matchReg.group(1)
+            SCA.ranCommitID=matchReg.group(1)
+            CLUSTER.ranCommitID=matchReg.group(1)
+        elif re.match(r'^\-\-eNBTargetBranch=(.*)$|^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE):
+            if re.match(r'^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE):
+                matchReg = re.match(r'^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE)
            else:
                matchReg = re.match(r'^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE)
-            RAN.targetBranch=matchReg.group(1)
-            CONTAINERS.targetBranch=matchReg.group(1)
-            CLUSTER.targetBranch=matchReg.group(1)
-        elif re.match(r'^\-\-workspace=(.+)$|^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE):
-            if re.match(r'^\-\-workspace=(.+)$', myArgv, re.IGNORECASE):
-                matchReg = re.match(r'^\-\-workspace=(.+)$', myArgv, re.IGNORECASE)
-            else:
+            CiTestObj.ranTargetBranch = matchReg.group(1)
+            RAN.ranTargetBranch=matchReg.group(1)
+            HTML.ranTargetBranch=matchReg.group(1)
+            CONTAINERS.ranTargetBranch=matchReg.group(1)
+            SCA.ranTargetBranch=matchReg.group(1)
+            CLUSTER.ranTargetBranch=matchReg.group(1)
+        elif re.match(r'^\-\-eNBIPAddress=(.+)$|^\-\-eNB[1-2]IPAddress=(.+)$', myArgv, re.IGNORECASE):
+            print("parameters --eNB*IPAddress ignored")
+        elif re.match(r'^\-\-eNBUserName=(.+)$|^\-\-eNB[1-2]UserName=(.+)$', myArgv, re.IGNORECASE):
+            print("parameters --eNB*UserName ignored")
+        elif re.match(r'^\-\-eNBPassword=(.+)$|^\-\-eNB[1-2]Password=(.+)$', myArgv, re.IGNORECASE):
+            print("parameter --eNB*Password ignored")
+        elif re.match(r'^\-\-eNBSourceCodePath=(.+)$|^\-\-eNB[1-2]SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
+            if re.match(r'^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                matchReg = re.match(r'^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE)
-            RAN.workspace=matchReg.group(1)
-            CONTAINERS.workspace=matchReg.group(1)
-            CLUSTER.workspace=matchReg.group(1)
+                RAN.eNBSourceCodePath=matchReg.group(1)
+                CONTAINERS.eNBSourceCodePath=matchReg.group(1)
+                SCA.eNBSourceCodePath=matchReg.group(1)
+                CLUSTER.eNBSourceCodePath=matchReg.group(1)
+            elif re.match(r'^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
+                print("parameter --eNB1SourceCodePath ignored")
+            elif re.match(r'^\-\-eNB2SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
+                print("parameter --eNB2SourceCodePath ignored")
        elif re.match(r'^\-\-XMLTestFile=(.+)$', myArgv, re.IGNORECASE):
            matchReg = re.match(r'^\-\-XMLTestFile=(.+)$', myArgv, re.IGNORECASE)
            CiTestObj.testXMLfiles.append(matchReg.group(1))
--- a/ci-scripts/as_ue/multi-00105-100.cfg
+++ b/ci-scripts/as_ue/multi-00105-100.cfg
--- a/ci-scripts/as_ue/multi-00105-40.cfg
+++ b/ci-scripts/as_ue/multi-00105-40.cfg
--- a/ci-scripts/ci_infra.yaml
+++ b/ci-scripts/ci_infra.yaml
@@ -79,19 +79,11 @@ oc-cn5g:

 oc-cn5g-20897:
  Host: cacofonix
-  NetworkScript: echo "inet 172.21.6.115"
+  NetworkScript: echo "inet 172.21.6.105"
  RunIperf3Server: False
-  Deploy: "! scripts/oc-cn5g-deploy.sh /opt/oai-cn5g-fed-develop-2026-apr oaicicd-core-for-fhi72"
-  Undeploy: "! scripts/oc-cn5g-undeploy.sh /opt/oai-cn5g-fed-develop-2026-apr oaicicd-core-for-fhi72"
-  LogCollect: "! scripts/oc-cn5g-logcollect.sh /opt/oai-cn5g-fed-develop-2026-apr oaicicd-core-for-fhi72 %%log_dir%%"
-
-oc-cn5g-00105:
-  Host: cacofonix
-  NetworkScript: echo "inet 172.21.6.118"
-  RunIperf3Server: False
-  Deploy: "! scripts/oc-cn5g-deploy.sh /opt/oai-cn5g-fed-develop-2026-apr-00105 oaicicd-core-for-fhi72"
-  Undeploy: "! scripts/oc-cn5g-undeploy.sh /opt/oai-cn5g-fed-develop-2026-apr-00105 oaicicd-core-for-fhi72"
-  LogCollect: "! scripts/oc-cn5g-logcollect.sh /opt/oai-cn5g-fed-develop-2026-apr-00105 oaicicd-core-for-fhi72 %%log_dir%%"
+  Deploy: "! scripts/oc-cn5g-deploy.sh /opt/oai-cn5g-fed-develop-2025-jan oaicicd-core-for-fhi72"
+  Undeploy: "! scripts/oc-cn5g-undeploy.sh /opt/oai-cn5g-fed-develop-2025-jan oaicicd-core-for-fhi72"
+  LogCollect: "! scripts/oc-cn5g-logcollect.sh /opt/oai-cn5g-fed-develop-2025-jan oaicicd-core-for-fhi72 %%log_dir%%"

 oc-cn5g-00103-ho:
  Host: groot
@@ -191,16 +183,6 @@ amarisoft_ue_2x2:
  InitScript: /root/lteue-linux-2025-03-15/lteue /root/oaicicd/ran_sa_aw2s_asue_20MHz_2x2/aw2s-multi-00102-2x2-v2.cfg &
  TermScript: /root/lteue-linux-2025-03-15/ws.js -t 10 127.0.0.1:9002 '{"message":"quit"}' || killall -KILL lteue-avx2
  NetworkScript: ip netns exec ue1 ip a show dev pdn0
-amarisoft_00105_40MHz:
-  Host: amariue
-  InitScript: /root/lteue-linux-2025-03-15/lteue /root/oaicicd/ran_sa_fhi72_mplane_40MHz/multi-00105-40.cfg &
-  TermScript: /root/lteue-linux-2025-03-15/ws.js -t 10 127.0.0.1:9002 '{"message":"quit"}' || killall -KILL lteue-avx2
-  NetworkScript: ip netns exec ue1 ip a show dev pdn0
-amarisoft_00105_100MHz:
-  Host: amariue
-  InitScript: /root/lteue-linux-2025-03-15/lteue /root/oaicicd/ran_sa_fhi72_mplane_100MHz/multi-00105-100.cfg &
-  TermScript: /root/lteue-linux-2025-03-15/ws.js -t 10 127.0.0.1:9002 '{"message":"quit"}' || killall -KILL lteue-avx2
-  NetworkScript: ip netns exec ue1 ip a show dev pdn0
 amarisoft_ue_1:
  Host: amariue
  AttachScript: /root/lteue-linux-2025-03-15/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":1}'
--- a/ci-scripts/cls_cluster.py
+++ b/ci-scripts/cls_cluster.py
@@ -50,16 +50,17 @@ def OC_logout(cmd):

 class Cluster:
 	def __init__(self):
-		self.workspace = ""
+		self.eNBSourceCodePath = ""
 		self.OCUserName = ""
 		self.OCPassword = ""
 		self.OCProjectName = ""
 		self.OCUrl = OCUrl
 		self.OCRegistry = OCRegistry
-		self.repository = ""
-		self.branch = ""
-		self.merge = False
-		self.targetBranch = ""
+		self.ranRepository = ""
+		self.ranBranch = ""
+		self.ranCommitID = ""
+		self.ranAllowMerge = False
+		self.ranTargetBranch = ""
 		self.cmd = None

 	def _recreate_entitlements(self):
@@ -100,7 +101,7 @@ class Cluster:
 	def _start_build(self, name):
 		# will return "immediately" but build runs in background
 		# if multiple builds are started at the same time, this can take some time, however
-		ret = self.cmd.run(f'oc start-build {name} --from-dir={self.workspace} --exclude=""')
+		ret = self.cmd.run(f'oc start-build {name} --from-dir={self.eNBSourceCodePath} --exclude=""')
 		regres = re.search(r'build.build.openshift.io/(?P<jobname>[a-zA-Z0-9\-]+) started', ret.stdout)
 		if ret.returncode != 0 or ret.stdout.count('Uploading finished') != 1 or regres is None:
 			logging.error(f"error during oc start-build: {ret.stdout}")
@@ -156,7 +157,7 @@ class Cluster:
 				OC_logout(cmd)
 				HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_LOGIN_FAIL)
 				return False
-			tag = self.branch
+			tag = cls_containerize.CreateTag(self.ranCommitID, self.ranBranch, self.ranAllowMerge)
 			registry = f'{self.OCRegistry}/{CI_OC_RAN_NAMESPACE}'
 			success, msg = cls_containerize.Containerize.Pull_Image(cmd, images, tag, tag_prefix, registry, None, None)
 			OC_logout(cmd)
@@ -173,12 +174,12 @@ class Cluster:
 		return (image, archiveArtifact(self.cmd, ctx, fn))

 	def BuildClusterImage(self, ctx, node, HTML):
-		if self.repository == '' or self.branch == '':
+		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
 			HELP.GenericHelp(CONST.Version)
-			raise ValueError(f'Insufficient Parameter: repository {self.repository} branch {self.branch}')
-		lSourcePath = self.workspace
+			raise ValueError(f'Insufficient Parameter: ranRepository {self.ranRepository} ranBranch {ranBranch} ranCommitID {self.ranCommitID}')
+		lSourcePath = self.eNBSourceCodePath
 		if node == '' or lSourcePath == '':
-			raise ValueError('Insufficient Parameter: workspace missing')
+			raise ValueError('Insufficient Parameter: eNBSourceCodePath missing')
 		ocUserName = self.OCUserName
 		ocPassword = self.OCPassword
 		ocProjectName = self.OCProjectName
@@ -199,22 +200,22 @@ class Cluster:

 		baseTag = 'develop'
 		forceBaseImageBuild = False
-		if self.merge: # merging MR branch into develop -> temporary image
-			branchName = self.branch.replace('/','-')
-			imageTag = f'{branchName}'
-			if self.targetBranch == 'develop':
+		if self.ranAllowMerge: # merging MR branch into develop -> temporary image
+			branchName = self.ranBranch.replace('/','-')
+			imageTag = f'{branchName}-{self.ranCommitID[0:8]}'
+			if self.ranTargetBranch == 'develop':
 				ret = self.cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base.rhel9 | grep --colour=never -i INDEX')
 				result = re.search('index', ret.stdout)
 				if result is not None:
 					forceBaseImageBuild = True
 					baseTag = 'ci-temp'
 			# if the branch name contains integration_20xx_wyy, let rebuild ran-base
-			result = re.search('integration_20([0-9]{2})_w([0-9]{2})', self.branch)
+			result = re.search('integration_20([0-9]{2})_w([0-9]{2})', self.ranBranch)
 			if not forceBaseImageBuild and result is not None:
 				forceBaseImageBuild = True
 				baseTag = 'ci-temp'
 		else:
-			imageTag = self.branch
+			imageTag = f'develop-{self.ranCommitID[0:8]}'
 			forceBaseImageBuild = True

 		# logging to OC Cluster and then switch to corresponding project
--- a/ci-scripts/cls_containerize.py
+++ b/ci-scripts/cls_containerize.py
@@ -32,15 +32,35 @@ from cls_ci_helper import archiveArtifact
 IMAGES = ['oai-enb', 'oai-lte-ru', 'oai-lte-ue', 'oai-gnb', 'oai-nr-cuup', 'oai-gnb-aw2s', 'oai-nr-ue', 'oai-enb-asan', 'oai-gnb-asan', 'oai-lte-ue-asan', 'oai-nr-ue-asan', 'oai-nr-cuup-asan', 'oai-gnb-aerial', 'oai-gnb-fhi72']
 DEFAULT_REGISTRY = "gracehopper3-oai.sboai.cs.eurecom.fr"

-def CreateWorkspace(host, sourcePath, repository, branch):
+def CreateWorkspace(host, sourcePath, ranRepository, ranCommitID, ranTargetBranch, ranAllowMerge):
+	if ranCommitID == '':
+		logging.error('need ranCommitID in CreateWorkspace()')
+		raise ValueError('Insufficient Parameter in CreateWorkspace(): need ranCommitID')
+
 	script = "scripts/create_workspace.sh"
-	options = f"{sourcePath} {repository} {branch}"
+	options = f"{sourcePath} {ranRepository} {ranCommitID}"
+	if ranAllowMerge:
+		if ranTargetBranch == '':
+			ranTargetBranch = 'develop'
+		options += f" {ranTargetBranch}"
 	logging.info(f'execute "{script}" with options "{options}" on node {host}')
 	with cls_cmd.getConnection(host) as c:
 		ret = c.exec_script(script, 90, options)
 	logging.debug(f'"{script}" finished with code {ret.returncode}, output:\n{ret.stdout}')
 	return ret.returncode == 0

+def CreateTag(ranCommitID, ranBranch, ranAllowMerge):
+	if ranCommitID == 'develop':
+		return 'develop'
+	shortCommit = ranCommitID[0:8]
+	if ranAllowMerge:
+		# Allowing contributor to have a name/branchName format
+		branchName = ranBranch.replace('/','-')
+		tagToUse = f'{branchName}-{shortCommit}'
+	else:
+		tagToUse = f'develop-{shortCommit}'
+	return tagToUse
+
 def AnalyzeBuildLogs(image, lf):
 	committed = False
 	tagged = False
@@ -152,16 +172,23 @@ class Containerize():

 	def __init__(self):
 		
-		self.repository = ''
-		self.branch = ''
-		self.merge = False
-		self.targetBranch = ''
-		self.workspace = ''
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranAllowMerge = False
+		self.ranCommitID = ''
+		self.ranTargetBranch = ''
+		self.eNBSourceCodePath = ''
 		self.imageKind = ''
+		self.proxyCommit = None
 		self.yamlPath = ''
 		self.services = ''
 		self.deploymentTag = ''

+		self.cli = ''
+		self.cliBuildOptions = ''
+		self.dockerfileprefix = ''
+		self.host = ''
+
 		self.num_attempts = 1

 		self.flexricTag = ''
@@ -171,12 +198,23 @@ class Containerize():
 #-----------------------------------------------------------

 	def BuildImage(self, ctx, node, HTML):
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		logging.debug('Building on server: ' + node)
 		cmd = cls_cmd.getConnection(node)
 		log_files = []
 	
-		dockerfileprefix = '.ubuntu'
+		# Checking the hostname to get adapted on cli and dockerfileprefixes
+		cmd.run('hostnamectl')
+		result = re.search('Ubuntu|Red Hat', cmd.getBefore())
+		self.host = result.group(0)
+		if self.host == 'Ubuntu':
+			self.cli = 'docker'
+			self.dockerfileprefix = '.ubuntu'
+			self.cliBuildOptions = ''
+		elif self.host == 'Red Hat':
+			self.cli = 'sudo podman'
+			self.dockerfileprefix = '.rhel9'
+			self.cliBuildOptions = '--disable-compression'

 		# we always build the ran-build image with all targets
 		# Creating a tupple with the imageName, the DockerFile prefix pattern, targetName and sanitized option
@@ -194,20 +232,23 @@ class Containerize():
 			imageNames.append(('oai-nr-cuup', 'nr-cuup', 'oai-nr-cuup', ''))
 			imageNames.append(('oai-lte-ue', 'lteUE', 'oai-lte-ue', ''))
 			imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue', ''))
-			imageNames.append(('oai-lte-ru', 'lteRU', 'oai-lte-ru', ''))
-			# Building again the 5G images with Address Sanitizer
-			imageNames.append(('ran-build', 'build', 'ran-build-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-			imageNames.append(('oai-enb', 'eNB', 'oai-enb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-			imageNames.append(('oai-gnb', 'gNB', 'oai-gnb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-			imageNames.append(('oai-lte-ue', 'lteUE', 'oai-lte-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-			imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-			imageNames.append(('oai-nr-cuup', 'nr-cuup', 'oai-nr-cuup-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-			imageNames.append(('ran-build-fhi72', 'build.fhi72', 'ran-build-fhi72', ''))
-			imageNames.append(('oai-gnb', 'gNB.fhi72', 'oai-gnb-fhi72', ''))
-			imageNames.append(('oai-nr-oru', 'nrORU.fhi72', 'oai-nr-oru', ''))
+			if self.host == 'Red Hat':
+				imageNames.append(('oai-physim', 'phySim', 'oai-physim', ''))
+			if self.host == 'Ubuntu':
+				imageNames.append(('oai-lte-ru', 'lteRU', 'oai-lte-ru', ''))
+				# Building again the 5G images with Address Sanitizer
+				imageNames.append(('ran-build', 'build', 'ran-build-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+				imageNames.append(('oai-enb', 'eNB', 'oai-enb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+				imageNames.append(('oai-gnb', 'gNB', 'oai-gnb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+				imageNames.append(('oai-lte-ue', 'lteUE', 'oai-lte-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+				imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+				imageNames.append(('oai-nr-cuup', 'nr-cuup', 'oai-nr-cuup-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+				imageNames.append(('ran-build-fhi72', 'build.fhi72', 'ran-build-fhi72', ''))
+				imageNames.append(('oai-gnb', 'gNB.fhi72', 'oai-gnb-fhi72', ''))
+				imageNames.append(('oai-nr-oru', 'nrORU.fhi72', 'oai-nr-oru', ''))
 		result = re.search('build_cross_arm64', self.imageKind)
 		if result is not None:
-			dockerfileprefix = '.ubuntu.cross-arm64'
+			self.dockerfileprefix = '.ubuntu.cross-arm64'
 		result = re.search('native_armv9', self.imageKind)
 		if result is not None:
 			imageNames.append(('oai-gnb', 'gNB', 'oai-gnb', ''))
@@ -222,21 +263,25 @@ class Containerize():
 			imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue', ''))
 		
 		cmd.cd(lSourcePath)
+		# if asterix, copy the entitlement and subscription manager configurations
+		if self.host == 'Red Hat':
+			cmd.run('mkdir -p ./etc-pki-entitlement')
+			cmd.run('cp /etc/pki/entitlement/*.pem ./etc-pki-entitlement/')

 		baseImage = 'ran-base'
 		baseTag = 'develop'
 		forceBaseImageBuild = False
 		imageTag = 'develop'
-		if (self.merge):
+		if (self.ranAllowMerge):
 			imageTag = 'ci-temp'
-			if self.targetBranch == 'develop':
-				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base{dockerfileprefix} | grep --colour=never -i INDEX')
+			if self.ranTargetBranch == 'develop':
+				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base{self.dockerfileprefix} | grep --colour=never -i INDEX')
 				result = re.search('index', cmd.getBefore())
 				if result is not None:
 					forceBaseImageBuild = True
 					baseTag = 'ci-temp'
 			# if the branch name contains integration_20xx_wyy, let rebuild ran-base
-			result = re.search('integration_20([0-9]{2})_w([0-9]{2})', self.branch)
+			result = re.search('integration_20([0-9]{2})_w([0-9]{2})', self.ranBranch)
 			if not forceBaseImageBuild and result is not None:
 				forceBaseImageBuild = True
 				baseTag = 'ci-temp'
@@ -244,30 +289,31 @@ class Containerize():
 			forceBaseImageBuild = True

 		# Let's remove any previous run artifacts if still there
-		cmd.run(f"docker image prune --force")
+		cmd.run(f"{self.cli} image prune --force")
 		for image,pattern,name,option in imageNames:
-			cmd.run(f"docker image rm {name}:{imageTag}", reportNonZero=False)
+			cmd.run(f"{self.cli} image rm {name}:{imageTag}", reportNonZero=False)

 		cmd.run(f'docker login -u oaicicd -p oaicicd {DEFAULT_REGISTRY}')
 		ubuntuImage = "ubuntu:noble"
 		# Build the base image only on Push Events (not on Merge Requests)
 		# On when the base image docker file is being modified.
 		if forceBaseImageBuild:
-			cmd.run(f"docker image rm {baseImage}:{baseTag}")
+			cmd.run(f"{self.cli} image rm {baseImage}:{baseTag}")
 			logfile = f'{lSourcePath}/cmake_targets/log/ran-base.docker.log'
-			option = f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
-			cmd.run(f"docker build --target {baseImage} --tag {baseImage}:{baseTag} --file docker/Dockerfile.base{dockerfileprefix} {option} . &> {logfile}", timeout=1600)
+			if self.host == 'Ubuntu':
+				option = f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
+			cmd.run(f"{self.cli} build {self.cliBuildOptions} --target {baseImage} --tag {baseImage}:{baseTag} --file docker/Dockerfile.base{self.dockerfileprefix} {option} . &> {logfile}", timeout=1600)
 			t = ("ran-base", archiveArtifact(cmd, ctx, logfile))
 			log_files.append(t)

 		# First verify if the base image was properly created.
-		ret = cmd.run(f"docker image inspect --format=\'Size = {{{{.Size}}}} bytes\' {baseImage}:{baseTag}")
+		ret = cmd.run(f"{self.cli} image inspect --format=\'Size = {{{{.Size}}}} bytes\' {baseImage}:{baseTag}")
 		allImagesSize = {}
 		if ret.returncode != 0:
 			logging.error('\u001B[1m Could not build properly ran-base\u001B[0m')
 			# Recover the name of the failed container?
-			cmd.run(f"docker ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty docker rm -f")
-			cmd.run(f"docker image prune --force")
+			cmd.run(f"{self.cli} ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty {self.cli} rm -f")
+			cmd.run(f"{self.cli} image prune --force")
 			cmd.close()
 			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
 			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
@@ -287,31 +333,32 @@ class Containerize():
 		for image,pattern,name,option in imageNames:
 			# the archived Dockerfiles have "ran-base:latest" as base image
 			# we need to update them with proper tag
-			cmd.run(f'git checkout -- docker/Dockerfile.{pattern}{dockerfileprefix}')
-			cmd.run(f'sed -i -e "s#{baseImage}:latest#{baseImage}:{baseTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
+			cmd.run(f'git checkout -- docker/Dockerfile.{pattern}{self.dockerfileprefix}')
+			cmd.run(f'sed -i -e "s#{baseImage}:latest#{baseImage}:{baseTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
 			# target images should use the proper ran-build image
 			if image != 'ran-build' and "-asan" in name:
-				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build-asan:{imageTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
+				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build-asan:{imageTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
 			elif "fhi72" in name or name == "oai-nr-oru":
-				cmd.run(f'sed -i -e "s#ran-build-fhi72:latest#ran-build-fhi72:{imageTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
+				cmd.run(f'sed -i -e "s#ran-build-fhi72:latest#ran-build-fhi72:{imageTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
 			elif image != 'ran-build':
-				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build:{imageTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
+				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build:{imageTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
 			if image == 'oai-gnb-aerial':
 				cmd.run('cp -f /opt/nvidia-ipc/nvipc_src.2026.01.07.tar.gz .')
 			logfile = f'{lSourcePath}/cmake_targets/log/{name}.docker.log'
-			option = option + f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
-			ret = cmd.run(f'docker build --target {image} --tag {name}:{imageTag} --file docker/Dockerfile.{pattern}{dockerfileprefix} {option} . > {logfile} 2>&1', timeout=1200)
+			if self.host == 'Ubuntu':
+				option = option + f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
+			ret = cmd.run(f'{self.cli} build {self.cliBuildOptions} --target {image} --tag {name}:{imageTag} --file docker/Dockerfile.{pattern}{self.dockerfileprefix} {option} . > {logfile} 2>&1', timeout=1200)
 			t = (name, archiveArtifact(cmd, ctx, logfile))
 			log_files.append(t)
 			if image == 'oai-gnb-aerial':
 				cmd.run('rm -f nvipc_src.2026.01.07.tar.gz')
 			# check the status of the build
-			ret = cmd.run(f"docker image inspect --format=\'Size = {{{{.Size}}}} bytes\' {name}:{imageTag}")
+			ret = cmd.run(f"{self.cli} image inspect --format=\'Size = {{{{.Size}}}} bytes\' {name}:{imageTag}")
 			if ret.returncode != 0:
 				logging.error('\u001B[1m Could not build properly ' + name + '\u001B[0m')
 				status = False
 				# Here we should check if the last container corresponds to a failed command and destroy it
-				cmd.run(f"docker ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty docker rm -f")
+				cmd.run(f"{self.cli} ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty {self.cli} rm -f")
 				allImagesSize[name] = 'N/A -- Build Failed'
 				break
 			else:
@@ -325,16 +372,16 @@ class Containerize():
 					logging.debug(f'{name} size is unknown')
 					allImagesSize[name] = 'unknown'
 			# Now pruning dangling images in between target builds
-			cmd.run(f"docker image prune --force")
+			cmd.run(f"{self.cli} image prune --force")
 		cmd.run(f'docker logout {DEFAULT_REGISTRY}')
 		# Remove all intermediate build images and clean up
-		cmd.run(f"docker image rm ran-build:{imageTag} ran-build-asan:{imageTag} ran-build-fhi72:{imageTag} || true")
-		cmd.run(f"docker volume prune --force")
+		cmd.run(f"{self.cli} image rm ran-build:{imageTag} ran-build-asan:{imageTag} ran-build-fhi72:{imageTag} || true")
+		cmd.run(f"{self.cli} volume prune --force")

 		# Remove some cached artifacts to prevent out of diskspace problem
 		logging.debug(cmd.run("df -h").stdout)
 		logging.debug(cmd.run("docker system df").stdout)
-		cmd.run(f"docker buildx prune --filter until=1h --force")
+		cmd.run(f"{self.cli} buildx prune --filter until=1h --force")
 		logging.debug(cmd.run("df -h").stdout)
 		logging.debug(cmd.run("docker system df").stdout)

@@ -354,18 +401,108 @@ class Containerize():
 			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
 		return status

+	def BuildProxy(self, ctx, node, HTML):
+		lSourcePath = self.eNBSourceCodePath
+		logging.debug('Building on server: ' + node)
+		ssh = cls_cmd.getConnection(node)
+
+		oldRanCommidID = self.ranCommitID
+		oldRanRepository = self.ranRepository
+		oldRanAllowMerge = self.ranAllowMerge
+		oldRanTargetBranch = self.ranTargetBranch
+		self.ranCommitID = self.proxyCommit
+		self.ranRepository = 'https://github.com/EpiSci/oai-lte-5g-multi-ue-proxy.git'
+		self.ranAllowMerge = False
+		self.ranTargetBranch = 'master'
+
+		# Let's remove any previous run artifacts if still there
+		ssh.run('docker image prune --force')
+		# Remove any previous proxy image
+		ssh.run('docker image rm oai-lte-multi-ue-proxy:latest')
+
+		tag = self.proxyCommit
+		logging.debug('building L2sim proxy image for tag ' + tag)
+		# check if the corresponding proxy image with tag exists. If not, build it
+		ret = ssh.run(f'docker image inspect --format=\'Size = {{{{.Size}}}} bytes\' proxy:{tag}')
+		buildProxy = ret.returncode != 0 # if no image, build new proxy
+		if buildProxy:
+			ssh.run(f'rm -Rf {lSourcePath}')
+			success = CreateWorkspace(node, lSourcePath, self.ranRepository, self.ranCommitID, self.ranTargetBranch, self.ranAllowMerge)
+			if not success:
+				raise Exception("could not clone proxy repository")
+
+			fullpath = f'{lSourcePath}/proxy_build.log'
+
+			ssh.run(f'docker build --target oai-lte-multi-ue-proxy --tag proxy:{tag} --file {lSourcePath}/docker/Dockerfile.ubuntu18.04 {lSourcePath} > {fullpath} 2>&1')
+			archiveArtifact(ssh, ctx, fullpath)
+
+			ssh.run('docker image prune --force')
+			ret = ssh.run(f'docker image inspect --format=\'Size = {{{{.Size}}}} bytes\' proxy:{tag}')
+			if ret.returncode != 0:
+				logging.error('\u001B[1m Build of L2sim proxy failed\u001B[0m')
+				ssh.close()
+				HTML.CreateHtmlTestRow('commit ' + tag, 'KO', CONST.ALL_PROCESSES_OK)
+				return False
+		else:
+			logging.debug('L2sim proxy image for tag ' + tag + ' already exists, skipping build')
+
+		# retag the build images to that we pick it up later
+		ssh.run(f'docker image tag proxy:{tag} oai-lte-multi-ue-proxy:latest')
+
+		# we assume that the host on which this is built will also run the proxy. The proxy
+		# currently requires the following command, and the docker-compose up mechanism of
+		# the CI does not allow to run arbitrary commands. Note that the following actually
+		# belongs to the deployment, not the build of the proxy...
+		logging.warning('the following command belongs to deployment, but no mechanism exists to exec it there!')
+		ssh.run('sudo ifconfig lo: 127.0.0.2 netmask 255.0.0.0 up')
+
+		# to prevent accidentally overwriting data that might be used later
+		self.ranCommitID = oldRanCommidID
+		self.ranRepository = oldRanRepository
+		self.ranAllowMerge = oldRanAllowMerge
+		self.ranTargetBranch = oldRanTargetBranch
+
+		ret = ssh.run(f'docker image inspect --format=\'Size = {{{{.Size}}}} bytes\' proxy:{tag}')
+		result = re.search(r'Size *= *(?P<size>[0-9\-]+) *bytes', ret.stdout)
+		# Cleaning any created tmp volume
+		ssh.run('docker volume prune --force')
+		ssh.close()
+
+		allImagesSize = {}
+		if result is not None:
+			imageSize = float(result.group('size')) / 1000000
+			logging.debug('\u001B[1m   proxy size is ' + ('%.0f' % imageSize) + ' Mbytes\u001B[0m')
+			allImagesSize['proxy'] = str(round(imageSize,1)) + ' Mbytes'
+			logging.info('\u001B[1m Building L2sim Proxy Image Pass\u001B[0m')
+			HTML.CreateHtmlTestRow('commit ' + tag, 'OK', CONST.ALL_PROCESSES_OK)
+			return True
+		else:
+			logging.error('proxy size is unknown')
+			allImagesSize['proxy'] = 'unknown'
+			logging.error('\u001B[1m Build of L2sim proxy failed\u001B[0m')
+			HTML.CreateHtmlTestRow('commit ' + tag, 'KO', CONST.ALL_PROCESSES_OK)
+			return False
+
 	def BuildRunTests(self, ctx, node, dockerfile, runtime_opt, ctest_opt, HTML):
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		logging.debug('Building on server: ' + node)
 		cmd = cls_cmd.getConnection(node)
 		cmd.cd(lSourcePath)

+		ret = cmd.run('hostnamectl')
+		result = re.search('Ubuntu', ret.stdout)
+		host = result.group(0)
+		if host != 'Ubuntu':
+			cmd.close()
+			raise Exception("Can build unit tests only on Ubuntu server")
+		logging.debug('running on Ubuntu as expected')
+
 		# check that ran-base image exists as we expect it
 		baseImage = 'ran-base'
 		baseTag = 'develop'
-		if self.merge:
-			if self.targetBranch == 'develop':
-				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base.ubuntu | grep --colour=never -i INDEX')
+		if self.ranAllowMerge:
+			if self.ranTargetBranch == 'develop':
+				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base{self.dockerfileprefix} | grep --colour=never -i INDEX')
 				result = re.search('index', cmd.getBefore())
 				if result is not None:
 					baseTag = 'ci-temp'
@@ -407,7 +544,7 @@ class Containerize():
 			return False

 	def Push_Image_to_Local_Registry(self, node, HTML, tag_prefix=""):
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		logging.debug('Pushing images to server: ' + node)
 		ssh = cls_cmd.getConnection(node)
 		imagePrefix = DEFAULT_REGISTRY
@@ -420,10 +557,10 @@ class Containerize():
 			return False

 		orgTag = 'develop'
-		if self.merge:
+		if self.ranAllowMerge:
 			orgTag = 'ci-temp'
 		for image in IMAGES:
-			tagToUse = tag_prefix + self.branch
+			tagToUse = tag_prefix + CreateTag(self.ranCommitID, self.ranBranch, self.ranAllowMerge)
 			imageTag = f"{image}:{tagToUse}"
 			ret = ssh.run(f'docker image tag {image}:{orgTag} {imagePrefix}/{imageTag}')
 			if ret.returncode != 0:
@@ -436,7 +573,7 @@ class Containerize():
 				HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
 				return False
 			# Creating a develop tag on the local private registry
-			if not self.merge:
+			if not self.ranAllowMerge:
 				devTag = f"{tag_prefix}develop"
 				ssh.run(f'docker image tag {image}:{orgTag} {imagePrefix}/{image}:{devTag}')
 				ssh.run(f'docker push {imagePrefix}/{image}:{devTag}')
@@ -484,7 +621,7 @@ class Containerize():
 	def Pull_Image_from_Registry(self, HTML, node, images, tag=None, tag_prefix="", registry=DEFAULT_REGISTRY, username="oaicicd", password="oaicicd"):
 		logging.debug(f'\u001B[1m Pulling image(s) on server: {node}\u001B[0m')
 		if not tag:
-			tag = self.branch
+			tag = CreateTag(self.ranCommitID, self.ranBranch, self.ranAllowMerge)
 		with cls_cmd.getConnection(node) as cmd:
 			success, msg = Containerize.Pull_Image(cmd, images, tag, tag_prefix, registry, username, password)
 		param = f"on node {node}"
@@ -497,7 +634,7 @@ class Containerize():
 	def Clean_Test_Server_Images(self, HTML, node, images, tag=None):
 		logging.debug(f'\u001B[1m Cleaning image(s) from server: {node}\u001B[0m')
 		if not tag:
-			tag = self.branch
+			tag = CreateTag(self.ranCommitID, self.ranBranch, self.ranAllowMerge)

 		status = True
 		with cls_cmd.getConnection(node) as myCmd:
@@ -516,17 +653,17 @@ class Containerize():
 		return status

 	def Create_Workspace(self, node, HTML):
-		sourcePath = self.workspace
-		success = CreateWorkspace(node, sourcePath, self.repository, self.branch)
+		lSourcePath = self.eNBSourceCodePath
+		success = CreateWorkspace(node, lSourcePath, self.ranRepository, self.ranCommitID, self.ranTargetBranch, self.ranAllowMerge)
 		if success:
-			HTML.CreateHtmlTestRowQueue('N/A', 'OK', [f"created workspace {sourcePath} on node {node}"])
+			HTML.CreateHtmlTestRowQueue('N/A', 'OK', [f"created workspace {lSourcePath}"])
 		else:
 			HTML.CreateHtmlTestRowQueue('N/A', 'KO', ["cannot create workspace"])
 		return success

 	def DeployObject(self, ctx, node, HTML):
 		num_attempts = self.num_attempts
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		yaml = self.yamlPath.strip('/')
 		wd = f'{lSourcePath}/{yaml}'
 		wd_yaml = f'{wd}/docker-compose.y*ml'
@@ -544,7 +681,7 @@ class Containerize():
 				raise ValueError(f'Invalid value for num_attempts: {num_attempts}, must be greater than 0')
 			for attempt in range(num_attempts):
 				logging.info(f'will start services {services}')
-				status = ssh.run(f'docker compose -f {wd_yaml} up -d --wait --wait-timeout 120 -- {services}')
+				status = ssh.run(f'docker compose -f {wd_yaml} up -d --wait --wait-timeout 60 -- {services}')
 				info = ssh.run(f"docker compose -f {wd_yaml} ps --all --format=\'table {{{{.Service}}}} [{{{{.Image}}}}] {{{{.Status}}}}\' -- {services} | column -t")
 				deployed = status.returncode == 0
 				if not deployed:
@@ -570,7 +707,7 @@ class Containerize():
 		return deployed

 	def StopObject(self, ctx, node, HTML):
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		if not self.services:
 			raise ValueError(f'no services provided')
 		logging.info(f'\u001B[1m Stopping objects "{self.services}" from server: {node}\u001B[0m')
@@ -599,7 +736,7 @@ class Containerize():
 		return success

 	def UndeployObject(self, ctx, node, HTML, to_analyze):
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		logging.info(f'\u001B[1m Undeploying all objects from server {node}\u001B[0m')
 		yaml = self.yamlPath.strip('/')
 		wd = f'{lSourcePath}/{yaml}'
@@ -637,7 +774,7 @@ class Containerize():
 	def AnalyzeRTStatsObject(self, HTML, node, ctx, thresholds, service=None):
 		logging.info(f'Analyzing realtime stats from server: {node}')
 		yaml = self.yamlPath.strip('/')
-		wd = f'{self.workspace}/{yaml}'
+		wd = f'{self.eNBSourceCodePath}/{yaml}'
 		wd_yaml = f'{wd}/docker-compose.y*ml'

 		with cls_cmd.getConnection(node) as cmd:
--- a/ci-scripts/cls_oai_html.py
+++ b/ci-scripts/cls_oai_html.py
@@ -33,9 +33,11 @@ class HTMLManagement():
 		self.htmlHeaderCreated = False
 		self.htmlFooterCreated = False

-		self.repository = ''
-		self.branch = ''
-		self.commitID = ''
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranCommitID = ''
+		self.ranAllowMerge = False
+		self.ranTargetBranch = ''

 		self.nbTestXMLfiles = 0
 		self.htmlTabRefs = []
@@ -94,18 +96,47 @@ class HTMLManagement():
 			self.htmlFile.write('     </tr>\n')
 			self.htmlFile.write('     <tr>\n')
 			self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-cloud-upload"></span> GIT Repository </td>\n')
-			self.htmlFile.write('       <td><a href="' + self.repository + '">' + self.repository + '</a></td>\n')
+			self.htmlFile.write('       <td><a href="' + self.ranRepository + '">' + self.ranRepository + '</a></td>\n')
 			self.htmlFile.write('     </tr>\n')
 			self.htmlFile.write('     <tr>\n')
-			self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-log-out"></span> Test Branch </td>\n')
-			self.htmlFile.write('       <td>' + self.branch + '</td>\n')
+			self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-wrench"></span> Job Trigger </td>\n')
+			if (self.ranAllowMerge):
+				self.htmlFile.write('       <td>Merge-Request</td>\n')
+			else:
+				self.htmlFile.write('       <td>Push to Branch</td>\n')
 			self.htmlFile.write('     </tr>\n')
-			commit_message = subprocess.check_output("git log -n1 --pretty=format:\"%s\" " + self.commitID, shell=True, universal_newlines=True)
-			commit_message = commit_message.strip()
 			self.htmlFile.write('     <tr>\n')
-			self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-comment"></span> Commit Message </td>\n')
-			self.htmlFile.write('       <td>' + commit_message + '</td>\n')
+			if (self.ranAllowMerge):
+				self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-log-out"></span> Source Branch </td>\n')
+			else:
+				self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-tree-deciduous"></span> Branch</td>\n')
+			self.htmlFile.write('       <td>' + self.ranBranch + '</td>\n')
 			self.htmlFile.write('     </tr>\n')
+			self.htmlFile.write('     <tr>\n')
+			if (self.ranAllowMerge):
+				self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-tag"></span> Source Commit ID </td>\n')
+			else:
+				self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-tag"></span> Commit ID </td>\n')
+			self.htmlFile.write('       <td>' + self.ranCommitID + '</td>\n')
+			self.htmlFile.write('     </tr>\n')
+			if self.ranAllowMerge != '' and self.ranCommitID != 'develop':
+				commit_message = subprocess.check_output("git log -n1 --pretty=format:\"%s\" " + self.ranCommitID, shell=True, universal_newlines=True)
+				commit_message = commit_message.strip()
+				self.htmlFile.write('     <tr>\n')
+				if (self.ranAllowMerge):
+					self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-comment"></span> Source Commit Message </td>\n')
+				else:
+					self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-comment"></span> Commit Message </td>\n')
+				self.htmlFile.write('       <td>' + commit_message + '</td>\n')
+				self.htmlFile.write('     </tr>\n')
+			if (self.ranAllowMerge):
+				self.htmlFile.write('     <tr>\n')
+				self.htmlFile.write('       <td bgcolor = "lightcyan" > <span class="glyphicon glyphicon-log-in"></span> Target Branch </td>\n')
+				if (self.ranTargetBranch == ''):
+					self.htmlFile.write('       <td>develop</td>\n')
+				else:
+					self.htmlFile.write('       <td>' + self.ranTargetBranch + '</td>\n')
+				self.htmlFile.write('     </tr>\n')
 			self.htmlFile.write('  </table>\n')

 			self.htmlFile.write('  <br>\n')
@@ -348,6 +379,90 @@ class HTMLManagement():
 			self.htmlFile.write('      </tr>\n')
 			self.htmlFile.close()

+	def CreateHtmlTestRowCppCheckResults(self, CCR):
+		if (self.htmlFooterCreated or (not self.htmlHeaderCreated)):
+			return
+		self.htmlFile = open('test_results.html', 'a')
+		vId = 0
+		for version in CCR.versions:
+			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
+			self.htmlFile.write('        <td colspan="6"><b> Results for cppcheck v ' + version + ' </b></td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> NB ERRORS</b></td>\n')
+			if CCR.nbErrors[vId] == 0:
+				myColor = 'lightgreen'
+			elif CCR.nbErrors[vId] < 20:
+				myColor = 'orange'
+			else:
+				myColor = 'lightcoral'
+			self.htmlFile.write('        <td colspan="3" bgcolor = "' + myColor + '"><b>' + str(CCR.nbErrors[vId]) + '</b></td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> NB WARNINGS</b></td>\n')
+			if CCR.nbWarnings[vId] == 0:
+				myColor = 'lightgreen'
+			elif CCR.nbWarnings[vId] < 20:
+				myColor = 'orange'
+			else:
+				myColor = 'lightcoral'
+			self.htmlFile.write('        <td colspan="3" bgcolor = "' + myColor + '"><b>' + str(CCR.nbWarnings[vId]) + '</b></td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
+			self.htmlFile.write('        <td colspan="6"> ----------------- </td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Memory leak</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbMemLeaks[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Possible null pointer deference</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbNullPtrs[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Uninitialized variable</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbUninitVars[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Undefined behaviour shifting</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbTooManyBitsShift[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Signed integer overflow</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbIntegerOverflow[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
+			self.htmlFile.write('        <td colspan="6"> </td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Printf formatting issues</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbInvalidPrintf[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Modulo result is predetermined</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbModuloAlways[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Opposite Condition -> dead code</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbOppoInnerCondition[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			self.htmlFile.write('      <tr>\n')
+			self.htmlFile.write('        <td></td>\n')
+			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Wrong Scanf Nb Args</b></td>\n')
+			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbWrongScanfArg[vId]) + '</td>\n')
+			self.htmlFile.write('      </tr>\n')
+			vId += 1
+
 	def CreateHtmlTestRowPhySimTestResult(self, testSummary, testResult):
 		if (self.htmlFooterCreated or (not self.htmlHeaderCreated)):
 			return
--- a/ci-scripts/cls_oaicitest.py
+++ b/ci-scripts/cls_oaicitest.py
@@ -65,23 +65,6 @@ def Iperf_ComputeTime(args):
 		raise Exception('Iperf time not found!')
 	return int(result.group('iperf_time'))

-def Iperf_UpdateBindPort(opts, ueIP, idx):
-	# search if bind address present. Extract if yes, add if no.
-	bind_m = re.search(r'(-B|--bind)\s+(?P<ip>\d+\.\d+\.\d+\.\d+)', opts)
-	if bind_m:
-		bindIP = bind_m.group('ip')
-	else:
-		bindIP = ueIP
-		opts += f" -B {ueIP}"
-	# search if port present. Extract if yes, add if no.
-	port_m = re.search(r'(-p|--port)\s+(?P<port>\d+)', opts)
-	if port_m:
-		port = port_m.group('port')
-	else:
-		port = 5002 + idx
-		opts += f" -p {port}"
-	return bindIP, port, opts
-
 def convert_to_mbps(value, magnitude):
 	value = float(value)
 	if magnitude == 'K' or magnitude == 'k':
@@ -282,8 +265,12 @@ def Deploy_Physim(ctx, HTML, node, workdir, script, options):
 class OaiCiTest():
 	
 	def __init__(self):
-		self.repository = ''
-		self.branch = ''
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranCommitID = ''
+		self.ranAllowMerge = False
+		self.ranTargetBranch = ''
+
 		self.testXMLfiles = []
 		self.ping_args = ''
 		self.ping_packetloss_threshold = ''
@@ -470,6 +457,7 @@ class OaiCiTest():
 		svrIP = cn.getIP()
 		if not svrIP:
 			return (False, f"Iperf server {cn.getName()} has no IP address")
+
 		iperf_opt = self.iperf_args
 		jsonReport = "--json"
 		serverReport = ""
@@ -483,11 +471,11 @@ class OaiCiTest():
 			# note: enable server report collection on the UE side, no need to store and collect server report separately on the server side
 			serverReport = "--get-server-output"
 		iperf_time = Iperf_ComputeTime(self.iperf_args)
-		bindIP, port, iperf_opt = Iperf_UpdateBindPort(iperf_opt, ueIP, idx)
 		# hack: the ADB UEs don't have iperf in $PATH, so we need to hardcode for the moment
 		iperf_ue = '/data/local/tmp/iperf3' if re.search('adb', ue.getName()) else 'iperf3'
-		ue_header = f'UE {ue.getName()} ({bindIP})'
+		ue_header = f'UE {ue.getName()} ({ueIP})'
 		with cls_cmd.getConnection(ue.getHost()) as cmd_ue, cls_cmd.getConnection(cn.getHost()) as cmd_svr:
+			port = 5002 + idx
 			# note: some core setups start an iperf3 server automatically, indicated in ci_infra by runIperf3Server: False`
 			t = iperf_time * 2.5
 			cmd_ue.run(f'rm {client_filename}', reportNonZero=False, silent=True)
@@ -498,7 +486,7 @@ class OaiCiTest():
 				if ret.returncode == 0:
 					logging.warning(f'Iperf3 server on port {port} detected and terminated')
 				cmd_svr.run(f'{cn.getCmdPrefix()} timeout -vk3 {t} iperf3 -s -B {svrIP} -p {port} -1 {jsonReport} >> /dev/null &', timeout=t)
-			client_ret = cmd_ue.run(f'{ue.getCmdPrefix()} timeout -vk3 {t} {iperf_ue} -c {svrIP} {iperf_opt} {jsonReport} {serverReport} -O 5 >> {client_filename}', timeout=t, reportNonZero=False)
+			cmd_ue.run(f'{ue.getCmdPrefix()} timeout -vk3 {t} {iperf_ue} -B {ueIP} -c {svrIP} -p {port} {iperf_opt} {jsonReport} {serverReport} -O 5 >> {client_filename}', timeout=t)
 			dest_filename = archiveArtifact(cmd_ue, ctx, client_filename)
 		if udpIperf:
 			status, msg = Iperf_analyzeV3UDP(dest_filename, self.iperf_bitrate_threshold, self.iperf_packetloss_threshold, target_bitrate)
@@ -507,10 +495,6 @@ class OaiCiTest():
 		else:
 			status, msg = Iperf_analyzeV3TCPJson(dest_filename, self.iperf_tcp_rate_target)

-		# add some diagnostic messages if the actual iperf command returned non-zero
-		if client_ret.returncode != 0:
-			msg = f'{msg}\nIperf client command failed on {bindIP} -> {svrIP}:{port} (return code: {client_ret.returncode})'
-
 		return (status, f'{ue_header}\n{msg}')

 	def Iperf(self, ctx, node, HTML, infra_file="ci_infra.yaml"):
--- a/ci-scripts/cls_static_code_analysis.py
+++ b/ci-scripts/cls_static_code_analysis.py
@@ -27,30 +27,160 @@ import constants as CONST
 import cls_cmd
 from cls_ci_helper import archiveArtifact

+#-----------------------------------------------------------
+# Class Declaration
+#-----------------------------------------------------------
+class CppCheckResults():
+
+	def __init__(self):
+
+		self.variants = ['bionic', 'focal']
+		self.versions = ['','']
+		self.nbErrors = [0,0]
+		self.nbWarnings = [0,0]
+		self.nbNullPtrs = [0,0]
+		self.nbMemLeaks = [0,0]
+		self.nbUninitVars = [0,0]
+		self.nbInvalidPrintf = [0,0]
+		self.nbModuloAlways = [0,0]
+		self.nbTooManyBitsShift = [0,0]
+		self.nbIntegerOverflow = [0,0]
+		self.nbWrongScanfArg = [0,0]
+		self.nbPtrAddNotNull = [0,0]
+		self.nbOppoInnerCondition = [0,0]
+
 class StaticCodeAnalysis():

-	def LicenceAndFormattingCheck(ctx, node, HTML, d, branch, allowMerge, targetBranch):
+	def __init__(self):
+
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranAllowMerge = False
+		self.ranCommitID = ''
+		self.ranTargetBranch = ''
+		self.eNBSourceCodePath = ''
+
+	def CppCheckAnalysis(self, ctx, node, HTML):
+		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		lSourcePath = self.eNBSourceCodePath
+
+		if not lSourcePath or not node:
+			raise ValueError(f"{lSourcePath=} {node=}")
+		logging.debug('Building on server: ' + node)
+		cmd = cls_cmd.getConnection(node)
+		# on RedHat/CentOS .git extension is mandatory
+		result = re.search(r'([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
+		if result is not None:
+			full_ran_repo_name = self.ranRepository.replace('git/', 'git')
+		else:
+			full_ran_repo_name = self.ranRepository + '.git'
+
+		cmd.cd(lSourcePath)
+		logDir = f'{lSourcePath}/cmake_targets/log'
+		cmd.run(f'mkdir -p {logDir}')
+		cmd.run('docker image rm oai-cppcheck:bionic oai-cppcheck:focal')
+		cmd.run(f'sed -e "s@xenial@bionic@" {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.xenial > {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.bionic')
+		cmd.run(f'docker build --tag oai-cppcheck:bionic --file {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.bionic . > {logDir}/cppcheck-bionic.txt 2>&1')
+		cmd.run(f'sed -e "s@xenial@focal@" {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.xenial > {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.focal')
+		cmd.run(f'docker build --tag oai-cppcheck:focal --file {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.focal . > {logDir}/cppcheck-focal.txt 2>&1')
+		cmd.run('docker image rm oai-cppcheck:bionic oai-cppcheck:focal')
+
+		bionic = archiveArtifact(cmd, ctx, f'{logDir}/cppcheck-bionic.txt')
+		focal = archiveArtifact(cmd, ctx, f'{logDir}/cppcheck-focal.txt')
+		cmd.close()
+
+		CCR = CppCheckResults()
+		CCR_ref = CppCheckResults()
+		vId = 0
+		for variant in CCR.variants:
+			filename = ctx.baseFilename() + '-cppcheck-'+ variant + '.txt'
+			logging.info(f"will check file '{filename}'")
+			if not os.path.isfile(filename):
+				raise FileNotFoundError(f"{filename} is not a file")
+			else:
+				xmlStart = False
+				with open(filename, 'r') as logfile:
+					for line in logfile:
+						ret = re.search(r'cppcheck version="(?P<version>[0-9\.]+)"', str(line))
+						if ret is not None:
+						   CCR.versions[vId] = ret.group('version')
+						if re.search('RUN cat cmake_targets/log/cppcheck.xml', str(line)) is not None:
+							xmlStart = True
+						if xmlStart:
+							if re.search('severity="error"', str(line)) is not None:
+								CCR.nbErrors[vId] += 1
+							if re.search('severity="warning"', str(line)) is not None:
+								CCR.nbWarnings[vId] += 1
+							if re.search('id="memleak"', str(line)) is not None:
+								CCR.nbMemLeaks[vId] += 1
+							if re.search('id="nullPointer"', str(line)) is not None:
+								CCR.nbNullPtrs[vId] += 1
+							if re.search('id="uninitvar"', str(line)) is not None:
+								CCR.nbUninitVars[vId] += 1
+							if re.search('id="invalidPrintfArgType_sint"|id="invalidPrintfArgType_uint"', str(line)) is not None:
+								CCR.nbInvalidPrintf[vId] += 1
+							if re.search('id="moduloAlwaysTrueFalse"', str(line)) is not None:
+								CCR.nbModuloAlways[vId] += 1
+							if re.search('id="shiftTooManyBitsSigned"', str(line)) is not None:
+								CCR.nbTooManyBitsShift[vId] += 1
+							if re.search('id="integerOverflow"', str(line)) is not None:
+								CCR.nbIntegerOverflow[vId] += 1
+							if re.search('id="wrongPrintfScanfArgNum"|id="invalidScanfArgType_int"', str(line)) is not None:
+								CCR.nbWrongScanfArg[vId] += 1
+							if re.search('id="pointerAdditionResultNotNull"', str(line)) is not None:
+								CCR.nbPtrAddNotNull[vId] += 1
+							if re.search('id="oppositeInnerCondition"', str(line)) is not None:
+								CCR.nbOppoInnerCondition[vId] += 1
+			vMsg  = ''
+			vMsg += '========  Variant ' + variant + ' - ' + CCR.versions[vId] + ' ========\n'
+			vMsg += '   ' + str(CCR.nbErrors[vId]) + ' errors\n'
+			vMsg += '   ' + str(CCR.nbWarnings[vId]) + ' warnings\n'
+			vMsg += '  -- Details --\n'
+			vMsg += '   Memory leak:                     ' + str(CCR.nbMemLeaks[vId]) + '\n'
+			vMsg += '   Possible null pointer deference: ' + str(CCR.nbNullPtrs[vId]) + '\n'
+			vMsg += '   Uninitialized variable:          ' + str(CCR.nbUninitVars[vId]) + '\n'
+			vMsg += '   Undefined behaviour shifting:    ' + str(CCR.nbTooManyBitsShift[vId]) + '\n'
+			vMsg += '   Signed integer overflow:         ' + str(CCR.nbIntegerOverflow[vId]) + '\n'
+			vMsg += '\n'
+			vMsg += '   Printf formatting issue:         ' + str(CCR.nbInvalidPrintf[vId]) + '\n'
+			vMsg += '   Modulo result is predetermined:  ' + str(CCR.nbModuloAlways[vId]) + '\n'
+			vMsg += '   Opposite Condition -> dead code: ' + str(CCR.nbOppoInnerCondition[vId]) + '\n'
+			vMsg += '   Wrong Scanf Nb Args:             ' + str(CCR.nbWrongScanfArg[vId]) + '\n'
+			for vLine in vMsg.split('\n'):
+				logging.debug(vLine)
+			vId += 1
+
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		HTML.CreateHtmlTestRowCppCheckResults(CCR)
+		logging.info('\u001B[1m Static Code Analysis Pass\u001B[0m')
+
+		return True
+
+	def LicenceAndFormattingCheck(self, ctx, node, HTML):
 		# Workspace is no longer recreated from scratch.
 		# It implies that this method shall be called last within a build pipeline
 		# where workspace is already created
+		lSourcePath = self.eNBSourceCodePath

-		if not node or not d:
-			raise ValueError(f"{d=} {node=}")
+		if not node or not lSourcePath:
+			raise ValueError(f"{lSourcePath=} {node=}")
 		logging.debug('Building on server: ' + node)
 		cmd = cls_cmd.getConnection(node)
 		check_options = ''
-		if allowMerge:
-			check_options = f'--build-arg MERGE_REQUEST=true --build-arg SRC_BRANCH={branch}'
-			if targetBranch == '':
-				if branch != 'develop' and branch != 'origin/develop':
+		if self.ranAllowMerge:
+			check_options = f'--build-arg MERGE_REQUEST=true --build-arg SRC_BRANCH={self.ranBranch}'
+			if self.ranTargetBranch == '':
+				if self.ranBranch != 'develop' and self.ranBranch != 'origin/develop':
 					check_options += ' --build-arg TARGET_BRANCH=develop'
 			else:
-				check_options += f' --build-arg TARGET_BRANCH={targetBranch}'
+				check_options += f' --build-arg TARGET_BRANCH={self.ranTargetBranch}'

-		logDir = f'{d}/cmake_targets/log/'
+		logDir = f'{lSourcePath}/cmake_targets/log/'
 		cmd.run(f'mkdir -p {logDir}')
 		cmd.run('docker image rm oai-formatting-check:latest')
-		cmd.run(f'docker build --target oai-formatting-check --tag oai-formatting-check:latest {check_options} --file {d}/ci-scripts/docker/Dockerfile.formatting.ubuntu {d} > {logDir}/oai-formatting-check.txt 2>&1')
+		cmd.run(f'docker build --target oai-formatting-check --tag oai-formatting-check:latest {check_options} --file {lSourcePath}/ci-scripts/docker/Dockerfile.formatting.ubuntu {lSourcePath} > {logDir}/oai-formatting-check.txt 2>&1')

 		cmd.run('docker image rm oai-formatting-check:latest')
 		cmd.run('docker image prune --force')
--- a/ci-scripts/conf_files/enb.nsa.band7.25prb.usrpb200.conf
+++ b/ci-scripts/conf_files/enb.nsa.band7.25prb.usrpb200.conf
@@ -215,7 +215,6 @@ L1s =
 (
  {
    num_cc = 1;
-    prach_dtx_threshold = 200;
    tr_n_preference = "local_mac";
  }
 );
--- a/ci-scripts/conf_files/gnb-cu.sa.band78.106prb.conf
+++ b/ci-scripts/conf_files/gnb-cu.sa.band78.106prb.conf
@@ -17,7 +17,6 @@ gNBs =
    // Tracking area code, 0x0000 and 0xfffe are reserved values
    tracking_area_code  =  1;
    plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
-    cu_sibs = ( 2, 3, 4 );
    @include "neighbour-config.conf"

    nr_cellid = 12345678L;
--- a/ci-scripts/conf_files/gnb-vnf.sa.band78.273prb.aerial.ul-heavy.conf
+++ b/ci-scripts/conf_files/gnb-vnf.sa.band78.273prb.aerial.ul-heavy.conf
@@ -186,10 +186,10 @@ MACRLCs = (
  local_s_portd    = 50011; // vnf p7 port [!]
  tr_s_preference             = "aerial";
  tr_n_preference             = "local_RRC";
-  pucch_RSSI_Threshold        = -270;
-  pusch_RSSI_Threshold        = -260;
-  pusch_TargetSNRx10          = 290;
-  pucch_TargetSNRx10          = 200;
+  pucch_RSSI_Threshold = -270;
+  pusch_RSSI_Threshold = -260;
+  pusch_TargetSNRx10          = 260; # 150;
+  pucch_TargetSNRx10          = 200; #200;
  dl_max_mcs = 28;
  ul_max_mcs = 28;
  ul_min_mcs = 9;
--- a/ci-scripts/conf_files/gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf
+++ b/ci-scripts/conf_files/gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf
@@ -161,7 +161,7 @@ gNBs =


    ////////// AMF parameters:
-    amf_ip_address = ({ ipv4 = "172.21.6.113"; });
+    amf_ip_address = ({ ipv4 = "172.21.6.103"; });

    NETWORK_INTERFACES :
    {
--- a/ci-scripts/conf_files/gnb.sa.band77.273prb.usrpn310.2x2.conf
+++ b/ci-scripts/conf_files/gnb.sa.band77.273prb.usrpn310.2x2.conf
@@ -197,7 +197,7 @@ RUs = (
  nb_tx          = 2;
  nb_rx          = 2;
  att_tx         = 0;
-  att_rx         = 6;
+  att_rx         = 0;
  bands          = [77];
  max_pdschReferenceSignalPower = -27;
  max_rxgain                    = 71;
--- a/ci-scripts/conf_files/gnb.sa.band78.106prb.fhi72.4x4-benetel550-9b-mplane.conf
+++ b/ci-scripts/conf_files/gnb.sa.band78.106prb.fhi72.4x4-benetel550-9b-mplane.conf
@@ -1,262 +0,0 @@
-# SPDX-License-Identifier: LicenseRef-CSSL-1.0
-
-Active_gNBs = ( "gNB-OAI");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-gNBs =
-(
- {
-    ////////// Identification parameters:
-    gNB_ID    =  0xe00;
-    gNB_name  =  "gNB-OAI";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  1;
-    plmn_list = ({ mcc = 001; mnc = 05; mnc_length = 2; snssaiList = ( { sst = 1; }); });
-
-    nr_cellid = 1;
-
-    ////////// Physical parameters:
-
-    pdsch_AntennaPorts_XP = 2;
-    pdsch_AntennaPorts_N1 = 2;
-    maxMIMO_layers        = 4;
-    pusch_AntennaPorts    = 4;
-    do_CSIRS              = 1;
-
-    servingCellConfigCommon = (
-    {
- #spCellConfigCommon
-
-      physCellId                                                    = 0;
-#  downlinkConfigCommon
-    #frequencyInfoDL
-      # center frequency = 3350.01 MHz
-      # selected SSB frequency = 3349.92 MHz
-      absoluteFrequencySSB                                          = 623328;
-      dl_frequencyBand                                              = 78;
-      # frequency point A = 3330.93 MHz
-      dl_absoluteFrequencyPointA                                    = 622062;
-      #scs-SpecificCarrierList
-        dl_offstToCarrier                                           = 0;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        dl_subcarrierSpacing                                        = 1;
-        dl_carrierBandwidth                                         = 106;
-     #initialDownlinkBWP
-      #genericParameters
-       initialDLBWPlocationAndBandwidth                             = 28875; #38.101-1 Table 5.3.2-1
-       #
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        initialDLBWPsubcarrierSpacing                               = 1;
-      #pdcch-ConfigCommon
-        initialDLBWPcontrolResourceSetZero                          = 11;
-        initialDLBWPsearchSpaceZero                                 = 0;
-
-  #uplinkConfigCommon
-     #frequencyInfoUL
-      ul_frequencyBand                                              = 78;
-      #scs-SpecificCarrierList
-      ul_offstToCarrier                                             = 0;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      ul_subcarrierSpacing                                          = 1;
-      ul_carrierBandwidth                                           = 106;
-      pMax                                                          = 23;
-     #initialUplinkBWP
-      #genericParameters
-        initialULBWPlocationAndBandwidth                            = 28875;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        initialULBWPsubcarrierSpacing                               = 1;
-      #rach-ConfigCommon
-        #rach-ConfigGeneric
-          prach_ConfigurationIndex                                  = 152;
-#prach_msg1_FDM
-#0 = one, 1=two, 2=four, 3=eight
-          prach_msg1_FDM                                            = 0;
-          prach_msg1_FrequencyStart                                 = 0;
-          zeroCorrelationZoneConfig                                 = 0;
-          preambleReceivedTargetPower                               = -100;
-#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
-          preambleTransMax                                          = 8;
-#powerRampingStep
-# 0=dB0,1=dB2,2=dB4,3=dB6
-        powerRampingStep                                            = 3;
-#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
-#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
-#ra_ContentionResolutionTimer
-#(0..7) 8,16,24,32,40,48,56,64
-        ra_ContentionResolutionTimer                                = 7;
-        rsrp_ThresholdSSB                                           = 19;
-#prach-RootSequenceIndex_PR
-#1 = 839, 2 = 139
-        prach_RootSequenceIndex_PR                                  = 2;
-        prach_RootSequenceIndex                                     = 1;
-        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
-        #
-        msg1_SubcarrierSpacing                                      = 1,
-# restrictedSetConfig
-# 0=unrestricted, 1=restricted type A, 2=restricted type B
-        restrictedSetConfig                                         = 0,
-
-# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
-        msg3_DeltaPreamble                                          = 2;
-        p0_NominalWithGrant                                         = -96;
-
-# pucch-ConfigCommon setup :
-# pucchGroupHopping
-# 0 = neither, 1= group hopping, 2=sequence hopping
-        pucchGroupHopping                                           = 0;
-        hoppingId                                                   = 0;
-        p0_nominal                                                  = -96;
-
-      ssb_PositionsInBurst_Bitmap                                   = 0x1;
-
-# ssb_periodicityServingCell
-# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
-      ssb_periodicityServingCell                                    = 2;
-
-# dmrs_TypeA_position
-# 0 = pos2, 1 = pos3
-      dmrs_TypeA_Position                                           = 0;
-
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      subcarrierSpacing                                             = 1;
-
-
-  #tdd-UL-DL-ConfigurationCommon
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      referenceSubcarrierSpacing                                    = 1;
-      # pattern1
-      # dl_UL_TransmissionPeriodicity
-      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
-      dl_UL_TransmissionPeriodicity                                 = 5;
-      nrofDownlinkSlots                                             = 3;
-      nrofDownlinkSymbols                                           = 6;
-      nrofUplinkSlots                                               = 1;
-      nrofUplinkSymbols                                             = 4;
-
-  ssPBCH_BlockPower                                                 = -10;
-  }
-  );
-
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// AMF parameters:
-    amf_ip_address = ({ ipv4 = "172.21.6.116"; });
-
-    NETWORK_INTERFACES :
-    {
-        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.150";
-        GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.150";
-        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
-    };
-  }
-);
-
-MACRLCs = (
-{
-  tr_s_preference             = "local_L1";
-  tr_n_preference             = "local_RRC";
-  pusch_TargetSNRx10          = 250;
-  pucch_TargetSNRx10          = 200;
-  pusch_FailureThres          = 1000;
-}
-);
-
-L1s = (
-{
-  tr_n_preference = "local_mac";
-  prach_dtx_threshold = 100;
-  pucch0_dtx_threshold = 10;
-  pusch_dtx_threshold = 10;
-  max_ldpc_iterations = 15;
-  tx_amp_backoff_dB = 12; # needs to match O-RU configuration
-  L1_rx_thread_core = 3;
-  L1_tx_thread_core = 4;
-  phase_compensation = 0; # needs to match O-RU configuration
-}
-);
-
-RUs = (
-{
-  local_rf       = "no";
-  nb_tx          = 4;
-  nb_rx          = 4;
-  att_tx         = 24;
-  att_rx         = 0;
-  bands          = [78];
-  max_pdschReferenceSignalPower = -27;
-  max_rxgain                    = 75;
-  sf_extension                  = 0;
-  eNB_instances  = [0];
-  ru_thread_core = 5;
-  sl_ahead       = 10;
-  tr_preference  = "raw_if4p5"; # important: activate FHI7.2
-  do_precoding   = 0; # needs to match O-RU configuration
-}
-);
-
-security = {
-  # preferred ciphering algorithms
-  # the first one of the list that an UE supports in chosen
-  # valid values: nea0, nea1, nea2, nea3
-  ciphering_algorithms = ( "nea0" );
-
-  # preferred integrity algorithms
-  # the first one of the list that an UE supports in chosen
-  # valid values: nia0, nia1, nia2, nia3
-  integrity_algorithms = ( "nia2", "nia0" );
-
-  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
-  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
-  drb_ciphering = "yes";
-  drb_integrity = "no";
-};
-
-log_config :
-{
-  global_log_level = "info";
-  hw_log_level     = "info";
-  phy_log_level    = "info";
-  mac_log_level    = "info";
-  rlc_log_level    = "info";
-  pdcp_log_level   = "info";
-  rrc_log_level    = "info";
-  ngap_log_level   = "info";
-  f1ap_log_level   = "info";
-};
-
-fhi_72 = {
-  dpdk_devices = ("0000:c3:11.0"); # one VF can be used as well
-  system_core = 0;
-  io_core = 1;
-  worker_cores = (2);
-  du_key_pair = ("/opt/oai-gnb/etc/id_rsa.pub", "/opt/oai-gnb/etc/id_rsa");
-  du_addr = ("00:11:22:33:44:66");
-  vlan_tag = (3); # only one needed if one VF configured
-  ru_username = ("oranbenetel");
-  ru_ip_addr = ("192.168.81.4");
-  fh_config = ({
-    T1a_cp_dl = (419, 470);
-    T1a_cp_ul = (285, 336);
-    T1a_up = (294, 345);
-    Ta4 = (0, 200);
-  });
-};
--- a/ci-scripts/conf_files/gnb.sa.band78.106prb.usrpb200.sc-fdma-deltaMCS.conf
+++ b/ci-scripts/conf_files/gnb.sa.band78.106prb.usrpb200.sc-fdma-deltaMCS.conf
@@ -18,7 +18,7 @@ gNBs =
    nr_cellid = 12345678L;

    ////////// Physical parameters:
-    use_deltaMCS = 1;
+

    servingCellConfigCommon = (
    {
@@ -180,7 +180,7 @@ MACRLCs = (
 {
  tr_s_preference             = "local_L1";
  tr_n_preference             = "local_RRC";
-  pusch_TargetSNRx10          = 100;
+  pusch_TargetSNRx10          = 200;
  pucch_TargetSNRx10          = 200;
  ul_prbblack_SNR_threshold   = 10;
 }
--- a/ci-scripts/conf_files/gnb.sa.band78.106prb.vrtsim.2x2.yaml
+++ b/ci-scripts/conf_files/gnb.sa.band78.106prb.vrtsim.2x2.yaml
@@ -207,40 +207,3 @@ channelmod:
     forgetfact: 0
     offset: 0
     ds_tdl: 0
-vrtsim:
-  role: server
-  # Channel mode: exactly one of the three modes below should be active.
-  #
-  # No channel - plain passthrough, no impairments:
-  # cirdb: 0
-  # chanmod: 0
-  #
-  # Built-in channel model defined in the channelmod: section above:
-  # chanmod: 1
-  # cirdb: 0
-  #
-  # External taps emitter publishing over a nanomsg socket.
-  # Requires a running emit_from_db.py and build with -DOAI_VRTSIM_TAPS_CLIENT=ON:
-  # cirdb: 0
-  # chanmod: 0
-  # taps-socket: "tcp://127.0.0.1:5555"
-  #
-  # In-process CIR database: reads precomputed 3GPP TDL taps directly from
-  # cir_db.bin. No external emitter required. Generate the database offline
-  # with cir_generator.py. Use cirdb-path to point to the directory containing
-  # cir_db.bin and cir_db.yaml.
-  cirdb_file: /cirdb/cir_db.bin
-  cirdb_yaml: /cirdb/cir_db.yaml  
-  #
-  # Per-UE channel configuration for multi-UE operation
-  ue_config:
-    - antennas: "2x2"   # NxM where N=UE-TX, M=gNB-TX; M must equal RU nb_tx
-      model_id: 0       # 0=TDL-A 1=TDL-B 2=TDL-C 3=TDL-D 4=TDL-E
-      ds_ns: 1.0        # RMS delay spread in ns
-      speed_mps: 1.5    # UE speed in m/s
-      # aoa_deg: 0.0    # angle of arrival in degrees; TDL-D/E only
-    - antennas: "1x2"   
-      model_id: 0
-      ds_ns: 1.0
-      speed_mps: 1.5
-      # aoa_deg: 0.0    
--- a/ci-scripts/conf_files/gnb.sa.band78.273prb.fhi72.2x2-benetel550-9b-mplane.conf
+++ b/ci-scripts/conf_files/gnb.sa.band78.273prb.fhi72.2x2-benetel550-9b-mplane.conf
@@ -1,260 +0,0 @@
-# SPDX-License-Identifier: LicenseRef-CSSL-1.0
-
-Active_gNBs = ( "gNB-OAI");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-gNBs =
-(
- {
-    ////////// Identification parameters:
-    gNB_ID    =  0xe00;
-    gNB_name  =  "gNB-OAI";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  1;
-    plmn_list = ({ mcc = 001; mnc = 05; mnc_length = 2; snssaiList = ( { sst = 1; }); });
-
-    nr_cellid = 1;
-
-    ////////// Physical parameters:
-
-    pdsch_AntennaPorts_XP = 2;
-    pusch_AntennaPorts    = 2;
-    do_CSIRS              = 1;
-
-    servingCellConfigCommon = (
-    {
- #spCellConfigCommon
-
-      physCellId                                                    = 0;
-#  downlinkConfigCommon
-    #frequencyInfoDL
-      # center frequency = 3350.01 MHz
-      # selected SSB frequency = 3349.92 MHz
-      absoluteFrequencySSB                                          = 623328;
-      dl_frequencyBand                                              = 78;
-      # frequency point A = 3300.87 MHz
-      dl_absoluteFrequencyPointA                                    = 620058;
-      #scs-SpecificCarrierList
-        dl_offstToCarrier                                           = 0;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        dl_subcarrierSpacing                                        = 1;
-        dl_carrierBandwidth                                         = 273;
-     #initialDownlinkBWP
-      #genericParameters
-       initialDLBWPlocationAndBandwidth                             = 1099; #38.101-1 Table 5.3.2-1
-       #
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        initialDLBWPsubcarrierSpacing                               = 1;
-      #pdcch-ConfigCommon
-        initialDLBWPcontrolResourceSetZero                          = 11;
-        initialDLBWPsearchSpaceZero                                 = 0;
-
-  #uplinkConfigCommon
-     #frequencyInfoUL
-      ul_frequencyBand                                              = 78;
-      #scs-SpecificCarrierList
-      ul_offstToCarrier                                             = 0;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      ul_subcarrierSpacing                                          = 1;
-      ul_carrierBandwidth                                           = 273;
-      pMax                                                          = 23;
-     #initialUplinkBWP
-      #genericParameters
-        initialULBWPlocationAndBandwidth                            = 1099;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        initialULBWPsubcarrierSpacing                               = 1;
-      #rach-ConfigCommon
-        #rach-ConfigGeneric
-          prach_ConfigurationIndex                                  = 152;
-#prach_msg1_FDM
-#0 = one, 1=two, 2=four, 3=eight
-          prach_msg1_FDM                                            = 0;
-          prach_msg1_FrequencyStart                                 = 0;
-          zeroCorrelationZoneConfig                                 = 0;
-          preambleReceivedTargetPower                               = -100;
-#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
-          preambleTransMax                                          = 8;
-#powerRampingStep
-# 0=dB0,1=dB2,2=dB4,3=dB6
-        powerRampingStep                                            = 3;
-#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
-#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
-#ra_ContentionResolutionTimer
-#(0..7) 8,16,24,32,40,48,56,64
-        ra_ContentionResolutionTimer                                = 7;
-        rsrp_ThresholdSSB                                           = 19;
-#prach-RootSequenceIndex_PR
-#1 = 839, 2 = 139
-        prach_RootSequenceIndex_PR                                  = 2;
-        prach_RootSequenceIndex                                     = 1;
-        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
-        #
-        msg1_SubcarrierSpacing                                      = 1,
-# restrictedSetConfig
-# 0=unrestricted, 1=restricted type A, 2=restricted type B
-        restrictedSetConfig                                         = 0,
-
-# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
-        msg3_DeltaPreamble                                          = 2;
-        p0_NominalWithGrant                                         = -96;
-
-# pucch-ConfigCommon setup :
-# pucchGroupHopping
-# 0 = neither, 1= group hopping, 2=sequence hopping
-        pucchGroupHopping                                           = 0;
-        hoppingId                                                   = 0;
-        p0_nominal                                                  = -96;
-
-      ssb_PositionsInBurst_Bitmap                                   = 0x1;
-
-# ssb_periodicityServingCell
-# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
-      ssb_periodicityServingCell                                    = 2;
-
-# dmrs_TypeA_position
-# 0 = pos2, 1 = pos3
-      dmrs_TypeA_Position                                           = 0;
-
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      subcarrierSpacing                                             = 1;
-
-
-  #tdd-UL-DL-ConfigurationCommon
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      referenceSubcarrierSpacing                                    = 1;
-      # pattern1
-      # dl_UL_TransmissionPeriodicity
-      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
-      dl_UL_TransmissionPeriodicity                                 = 5;
-      nrofDownlinkSlots                                             = 3;
-      nrofDownlinkSymbols                                           = 6;
-      nrofUplinkSlots                                               = 1;
-      nrofUplinkSymbols                                             = 4;
-
-  ssPBCH_BlockPower                                                 = -11;
-  }
-  );
-
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// AMF parameters:
-    amf_ip_address = ({ ipv4 = "172.21.6.116"; });
-
-    NETWORK_INTERFACES :
-    {
-        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.150";
-        GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.150";
-        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
-    };
-  }
-);
-
-MACRLCs = (
-{
-  tr_s_preference             = "local_L1";
-  tr_n_preference             = "local_RRC";
-  pusch_TargetSNRx10          = 200;
-  pucch_TargetSNRx10          = 200;
-  pusch_FailureThres          = 1000;
-}
-);
-
-L1s = (
-{
-  tr_n_preference = "local_mac";
-  prach_dtx_threshold = 100;
-  pucch0_dtx_threshold = 10;
-  pusch_dtx_threshold = 10;
-  max_ldpc_iterations = 15;
-  tx_amp_backoff_dB = 12; # needs to match O-RU configuration
-  L1_rx_thread_core = 3;
-  L1_tx_thread_core = 4;
-  phase_compensation = 0; # needs to match O-RU configuration
-}
-);
-
-RUs = (
-{
-  local_rf       = "no";
-  nb_tx          = 2;
-  nb_rx          = 2;
-  att_tx         = 24;
-  att_rx         = 0;
-  bands          = [78];
-  max_pdschReferenceSignalPower = -27;
-  max_rxgain                    = 75;
-  sf_extension                  = 0;
-  eNB_instances  = [0];
-  ru_thread_core = 5;
-  sl_ahead       = 10;
-  tr_preference  = "raw_if4p5"; # important: activate FHI7.2
-  do_precoding   = 0; # needs to match O-RU configuration
-}
-);
-
-security = {
-  # preferred ciphering algorithms
-  # the first one of the list that an UE supports in chosen
-  # valid values: nea0, nea1, nea2, nea3
-  ciphering_algorithms = ( "nea0" );
-
-  # preferred integrity algorithms
-  # the first one of the list that an UE supports in chosen
-  # valid values: nia0, nia1, nia2, nia3
-  integrity_algorithms = ( "nia2", "nia0" );
-
-  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
-  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
-  drb_ciphering = "yes";
-  drb_integrity = "no";
-};
-
-log_config :
-{
-  global_log_level = "info";
-  hw_log_level     = "info";
-  phy_log_level    = "info";
-  mac_log_level    = "info";
-  rlc_log_level    = "info";
-  pdcp_log_level   = "info";
-  rrc_log_level    = "info";
-  ngap_log_level   = "info";
-  f1ap_log_level   = "info";
-};
-
-fhi_72 = {
-  dpdk_devices = ("0000:c3:11.0"); # one VF can be used as well
-  system_core = 0;
-  io_core = 1;
-  worker_cores = (2);
-  du_key_pair = ("/opt/oai-gnb/etc/id_rsa.pub", "/opt/oai-gnb/etc/id_rsa");
-  du_addr = ("00:11:22:33:44:66");
-  vlan_tag = (3); # only one needed if one VF configured
-  ru_username = ("oranbenetel");
-  ru_ip_addr = ("192.168.81.4");
-  fh_config = ({
-    T1a_cp_dl = (419, 470);
-    T1a_cp_ul = (285, 336);
-    T1a_up = (294, 345);
-    Ta4 = (0, 200);
-  });
-};
--- a/ci-scripts/conf_files/neighbour-config.conf
+++ b/ci-scripts/conf_files/neighbour-config.conf
@@ -5,57 +5,6 @@
 #  for the 2-cell rfsim setup (gNB_ID 0xe00 & 0xb00)       #
 ############################################################

-############################################################
-#                           SIB2                           #
-############################################################
-
-sib2_config : {
-  q_Hyst                   = 0;
-  cellReselectionPriority  = 0;
-  threshServingLowP        = 0;
-  threshServingLowQ        = 0;
-  s_NonIntraSearchP        = -1;
-  s_NonIntraSearchQ        = -1;
-  q_RxLevMin               = -56;
-  q_QualMin                = -1;
-  s_IntraSearchP           = 22;
-  s_IntraSearchQ           = -1;
-  t_ReselectionNR          = 1;
-  deriveSSB_IndexFromCell  = 1;
-
-  speed_t_Evaluation       = 0;
-  speed_t_HystNormal       = 0;
-  speed_n_CellChangeMedium = 1;
-  speed_n_CellChangeHigh   = 2;
-  speed_sf_Medium          = 1;
-  speed_sf_High            = 0;
-};
-
-############################################################
-#      Per-frequency SIB4 inter-frequency configuration    #
-############################################################
-
-frequency_list = (
-  {
-    absoluteFrequencySSB = 621312;
-    subcarrierSpacing    = 1; # 30 kHz
-    band                 = 78;
-
-    frequency_config = (
-      {
-        cellReselectionPriority = 5;
-        threshX_HighP           = 10;
-        threshX_LowP            = 6;
-        threshX_HighQ           = -1;
-        threshX_LowQ            = -1;
-        q_OffsetFreq            = 0;
-        q_RxLevMin              = -56;
-        t_ReselectionNR         = 1;
-      }
-    );
-  }
-);
-
 neighbour_list = (
  ##########################################################
  #      Entry USED BY gNB_ID = 0xe00  (nr_cellid = 1)     #
@@ -72,9 +21,6 @@ neighbour_list = (
        band                = 78;
        plmn                = { mcc = 208; mnc = 99; mnc_length = 2 };
        tracking_area_code  = 1;
-        q_OffsetCell        = 2;
-        q_RxLevMinOffsetCell= 2;
-        q_QualMinOffsetCell = 1;
      }
    );
  },
@@ -94,9 +40,6 @@ neighbour_list = (
        band                = 78;
        plmn                = { mcc = 208; mnc = 99; mnc_length = 2 };
        tracking_area_code  = 1;
-        q_OffsetCell        = 2;
-        q_RxLevMinOffsetCell= 2;
-        q_QualMinOffsetCell = 1;
      }
    );
  }
--- a/ci-scripts/conf_files/nrue.uicc.2pdu.conf
+++ b/ci-scripts/conf_files/nrue.uicc.2pdu.conf
@@ -5,8 +5,8 @@ uicc0 = {
  key = "fec86ba6eb707ed08905757b1bb44b8f";
  opc= "C42449363BBAD02B66D16BC975D77CC1";
  pdu_sessions = (
-    { id = 1; dnn = "oai"; nssai_sst = 1; nssai_sd = 0xFFFFFF; },
-    { id = 2; dnn = "openairinterface"; nssai_sst = 1; nssai_sd = 0x123456; }
+    { id = 1; dnn = "oai"; nssai_sst = 1; },
+    { id = 2; dnn = "oai"; nssai_sst = 1; }
  )
 }

--- a/ci-scripts/conf_files/nrue.uicc.yaml
+++ b/ci-scripts/conf_files/nrue.uicc.yaml
@@ -30,7 +30,7 @@ channelmod:
    - model_name: rfsimu_channel_ue0
      type: AWGN
      ploss_dB: 20
-      noise_power_dB: -2
+      nose_power_dB: -2
      forgetfact: 0
      offset: 0
      ds_tdl: 0
--- a/ci-scripts/cppcheck_suppressions.list
+++ b/ci-scripts/cppcheck_suppressions.list
--- a/ci-scripts/datalog_rt_stats.100.2x2.yaml
+++ b/ci-scripts/datalog_rt_stats.100.2x2.yaml
@@ -10,7 +10,7 @@ ColNames :
  - Average vs Reference Deviation (Reference Value; Acceptability Deviation Threshold)
 Ref : 
  feprx : 150.0
-  feptx_prec : 0.0
+  feptx_prec : 30.0
  feptx_ofdm : 60.0
  feptx_total : 150.0
  L1 Tx processing : 475.0
--- a/ci-scripts/doGitLabMerge.sh
+++ b/ci-scripts/doGitLabMerge.sh
@@ -0,0 +1,126 @@
+#!/bin/bash
+# SPDX-License-Identifier: LicenseRef-CSSL-1.0
+
+function usage {
+    echo "OAI GitLab merge request applying script"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo ""
+    echo "    doGitLabMerge.sh [OPTIONS] [MANDATORY_OPTIONS]"
+    echo ""
+    echo "Mandatory Options:"
+    echo "------------------"
+    echo ""
+    echo "    --src-branch #### OR -sb ####"
+    echo "    Specify the source branch of the merge request."
+    echo ""
+    echo "    --src-commit #### OR -sc ####"
+    echo "    Specify the source commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "    --target-branch #### OR -tb ####"
+    echo "    Specify the target branch of the merge request (usually develop)."
+    echo ""
+    echo "    --target-commit #### OR -tc ####"
+    echo "    Specify the target commit ID (SHA-1) of the merge request."
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+if [ $# -ne 8 ] && [ $# -ne 1 ]
+then
+    echo "Syntax Error: not the correct number of arguments"
+    echo ""
+    usage
+    exit 1
+fi
+
+checker=0
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+    -h|--help)
+    shift
+    usage
+    exit 0
+    ;;
+    -sb|--src-branch)
+    SOURCE_BRANCH="$2"
+    let "checker|=0x1"
+    shift
+    shift
+    ;;
+    -sc|--src-commit)
+    SOURCE_COMMIT_ID="$2"
+    let "checker|=0x2"
+    shift
+    shift
+    ;;
+    -tb|--target-branch)
+    TARGET_BRANCH="$2"
+    let "checker|=0x4"
+    shift
+    shift
+    ;;
+    -tc|--target-commit)
+    TARGET_COMMIT_ID="$2"
+    let "checker|=0x8"
+    shift
+    shift
+    ;;
+    *)
+    echo "Syntax Error: unknown option: $key"
+    echo ""
+    usage
+    exit 1
+esac
+
+done
+
+if [[ $TARGET_COMMIT_ID == "latest" ]]
+then
+    TARGET_COMMIT_ID=`git log -n1 --pretty=format:%H origin/$TARGET_BRANCH`
+fi
+
+echo "Source Branch is    : $SOURCE_BRANCH"
+echo "Source Commit ID is : $SOURCE_COMMIT_ID"
+echo "Target Branch is    : $TARGET_BRANCH"
+echo "Target Commit ID is : $TARGET_COMMIT_ID"
+
+if [ $checker -ne 15 ]
+then
+    echo ""
+    echo "Syntax Error: missing option"
+    echo ""
+    usage
+    exit 1
+fi
+
+git config user.email "jenkins@openairinterface.org"
+git config user.name "OAI Jenkins"
+
+git checkout -f $SOURCE_COMMIT_ID > checkout.txt 2>&1
+STATUS=`grep -E -c "fatal: reference is not a tree" checkout.txt`
+rm -f checkout.txt
+if [ $STATUS -ne 0 ]
+then
+    echo "fatal: reference is not a tree --> $SOURCE_COMMIT_ID"
+    STATUS=-1
+    exit $STATUS
+fi
+
+git merge --ff $TARGET_COMMIT_ID -m "Temporary merge for CI"
+
+STATUS=`git status | grep -E -c "You have unmerged paths.|fix conflicts"`
+if [ $STATUS -ne 0 ]
+then
+    echo "There are merge conflicts.. Cannot perform further build tasks"
+    STATUS=-1
+fi
+exit $STATUS
--- a/ci-scripts/docker/Dockerfile.channelsim.ubuntu
+++ b/ci-scripts/docker/Dockerfile.channelsim.ubuntu
@@ -26,7 +26,7 @@ RUN cmake -GNinja -DENABLE_PHYSIM_TESTS=ON -DENABLE_TESTS=ON \
        -DSANITIZE_UNDEFINED=OFF -DSANITIZE_ADDRESS=OFF \
        -DCMAKE_C_FLAGS=-Werror -DCMAKE_CXX_FLAGS=-Werror \
        -DPHYSIM_CHECK_FILES="ThresholdsCuda.cmake" \
-        -DENABLE_CHANNEL_SIM_CUDA=ON \
+        -DCUDA_ENABLE=ON \
        -DUSE_UNIFIED_MEMORY=ON \
        -DUSE_ATS_MEMORY=OFF \
        -DCMAKE_RUNTIME_OUTPUT_DIRECTORY=/oai-ran/cmake_targets/ran_build/build \
--- a/ci-scripts/docker/Dockerfile.cppcheck.xenial
+++ b/ci-scripts/docker/Dockerfile.cppcheck.xenial
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: LicenseRef-CSSL-1.0
+
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface BUILD service
+#   Valid for Ubuntu 22.04
+#
+#---------------------------------------------------------------------
+FROM ubuntu:xenial AS oai-cppcheck
+
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update && \
+    apt-get upgrade --yes && \
+    apt-get install --yes \
+       build-essential \
+       vim \
+       cppcheck
+
+WORKDIR /oai-ran
+COPY . .
+
+WORKDIR /oai-ran/common/utils/T
+RUN make
+
+WORKDIR /oai-ran
+RUN mkdir -p cmake_targets/log && \
+    cppcheck --enable=warning --force --xml --xml-version=2 \
+        --inline-suppr \
+        -i openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c \
+        --suppressions-list=ci-scripts/cppcheck_suppressions.list \
+        -I common/utils \
+        -I openair3/NAS/COMMON/UTIL \
+        -j`nproc` . 2> cmake_targets/log/cppcheck.xml 1> cmake_targets/log/cppcheck_build.txt
+
+RUN grep -E -c 'severity="error' cmake_targets/log/cppcheck.xml
+
+RUN grep -E -c 'severity="warning' cmake_targets/log/cppcheck.xml
+
+RUN cat cmake_targets/log/cppcheck.xml
--- a/ci-scripts/docker/Dockerfile.physim.cuda.ubuntu
+++ b/ci-scripts/docker/Dockerfile.physim.cuda.ubuntu
@@ -26,7 +26,7 @@ RUN cmake -GNinja -DENABLE_PHYSIM_TESTS=ON -DENABLE_TESTS=ON \
        -DSANITIZE_UNDEFINED=OFF -DSANITIZE_ADDRESS=OFF \
        -DCMAKE_C_FLAGS=-Werror -DCMAKE_CXX_FLAGS=-Werror \
        -DPHYSIM_CHECK_FILES="ThresholdsCuda.cmake" \
-        -DENABLE_CHANNEL_SIM_CUDA=ON \
+        -DCUDA_ENABLE=ON \
        -DUSE_UNIFIED_MEMORY=ON \
        -DUSE_ATS_MEMORY=OFF \
        -DCMAKE_RUNTIME_OUTPUT_DIRECTORY=/oai-ran/cmake_targets/ran_build/build \
--- a/ci-scripts/docker/Dockerfile.unittest.cuda.ubuntu
+++ b/ci-scripts/docker/Dockerfile.unittest.cuda.ubuntu
@@ -22,4 +22,4 @@ WORKDIR /oai-ran
 COPY . .

 WORKDIR /oai-ran/build
-RUN cmake -GNinja -DENABLE_TESTS=ON -DENABLE_CHANNEL_SIM_CUDA=ON .. && ninja tests
+RUN cmake -GNinja -DENABLE_TESTS=ON -DCUDA_ENABLE=ON .. && ninja tests
--- a/ci-scripts/docker/Dockerfile.unittest.ubuntu
+++ b/ci-scripts/docker/Dockerfile.unittest.ubuntu
@@ -13,12 +13,11 @@ RUN apt-get update && \
    DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
    DEBIAN_FRONTEND=noninteractive apt-get install --yes \
        libgtest-dev \
-        libyaml-cpp-dev \
-        libzmq3-dev
+        libyaml-cpp-dev

 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
 COPY . .

 WORKDIR /oai-ran/build
-RUN cmake -GNinja -DENABLE_TESTS=ON -DOAI_ZMQ=ON -DCMAKE_BUILD_TYPE=Debug -DSANITIZE_ADDRESS=True .. && ninja
+RUN cmake -GNinja -DENABLE_TESTS=ON -DCMAKE_BUILD_TYPE=Debug -DSANITIZE_ADDRESS=True .. && ninja tests
--- a/ci-scripts/helpreadme.py
+++ b/ci-scripts/helpreadme.py
@@ -28,15 +28,16 @@ def GenericHelp(vers):
 	print('          images are available locally, will not remove any images and will run inside the current repo directory')

 def GitSrvHelp(repository,branch,commit,mergeallow,targetbranch):
-	print('  --repository=[OAI RAN Repository URL]                                      -- ' + repository)
-	print('  --branch=[OAI RAN Repository Branch]                                       -- ' + branch)
-	print('  --commitID=[OAI RAN Repository Commit SHA-1]                               -- ' + commit)
+	print('  --ranRepository=[OAI RAN Repository URL]                                      -- ' + repository)
+	print('  --ranBranch=[OAI RAN Repository Branch]                                       -- ' + branch)
+	print('  --ranCommitID=[OAI RAN Repository Commit SHA-1]                               -- ' + commit)
 	print('  --ranAllowMerge=[Allow Merge Request (with target branch) (true or false)]    -- ' + mergeallow)
-	print('  --targetBranch=[Target Branch in case of a Merge Request]                  -- ' + targetbranch)
+	print('  --ranTargetBranch=[Target Branch in case of a Merge Request]                  -- ' + targetbranch)

-def SrvHelp(sourcepath):
-	print('  --workspace=[directory for workspaces on remote hosts]            -- ' + sourcepath)
+def eNBSrvHelp(sourcepath):
+	print('  --eNBSourceCodePath=[eNB\'s Source Code Path]            -- ' + sourcepath)

 def XmlHelp(filename):
 	print('  --XMLTestFile=[XML Test File to be run]                  -- ' + filename)
 	print('	Note: multiple xml files can be specified (--XMLFile=File1 ... --XMLTestFile=FileN) when HTML headers are created ("InitiateHtml" mode)')
+
--- a/ci-scripts/main.py
+++ b/ci-scripts/main.py
@@ -22,7 +22,7 @@ import constants as CONST

 import cls_oaicitest		 #main class for OAI CI test framework
 import cls_containerize	 #class Containerize for all container-based operations on RAN/UE objects
-import cls_static_code_analysis as SCA
+import cls_static_code_analysis  #class for static code analysis
 import cls_cluster		 # class for building/deploying on cluster
 import cls_native        # class for all native/source-based operations
 from cls_ci_helper import TestCaseCtx
@@ -64,17 +64,23 @@ def ExecuteActionWithParam(action, ctx, node):
 	global RAN
 	global HTML
 	global CONTAINERS
+	global SCA
 	global CLUSTER
-	if action == 'Build_eNB' or action == 'Build_Image' or action == "Build_Cluster_Image" or action == "Build_Run_Tests":
+	if action == 'Build_eNB' or action == 'Build_Image' or action == 'Build_Proxy' or action == "Build_Cluster_Image" or action == "Build_Run_Tests":
 		RAN.Build_eNB_args=test.findtext('Build_eNB_args')
 		CONTAINERS.imageKind=test.findtext('kind')
+		proxy_commit = test.findtext('proxy_commit')
 		dockerfile = test.findtext('dockerfile') or ''
 		runtime_opt = test.findtext('runtime-opt') or ''
 		ctest_opt = test.findtext('ctest-opt') or ''
+		if proxy_commit is not None:
+			CONTAINERS.proxyCommit = proxy_commit
 		if action == 'Build_eNB':
-			success = cls_native.Native.Build(ctx, node, HTML, RAN.workspace, RAN.Build_eNB_args)
+			success = cls_native.Native.Build(ctx, node, HTML, RAN.eNBSourceCodePath, RAN.Build_eNB_args)
 		elif action == 'Build_Image':
 			success = CONTAINERS.BuildImage(ctx, node, HTML)
+		elif action == 'Build_Proxy':
+			success = CONTAINERS.BuildProxy(ctx, node, HTML)
 		elif action == 'Build_Cluster_Image':
 			success = CLUSTER.BuildClusterImage(ctx, node, HTML)
 		elif action == 'Build_Run_Tests':
@@ -148,16 +154,16 @@ def ExecuteActionWithParam(action, ctx, node):
 	elif action == 'Deploy_Run_OC_PhySim':
 		oc_release = test.findtext('oc_release')
 		script = "scripts/oc-deploy-physims.sh"
-		image_tag = CLUSTER.branch
-		options = f"oaicicd-core-for-ci-ran {oc_release} {image_tag} {CLUSTER.workspace}"
-		workdir = CLUSTER.workspace
+		image_tag = cls_containerize.CreateTag(CLUSTER.ranCommitID, CLUSTER.ranBranch, CLUSTER.ranAllowMerge)
+		options = f"oaicicd-core-for-ci-ran {oc_release} {image_tag} {CLUSTER.eNBSourceCodePath}"
+		workdir = CLUSTER.eNBSourceCodePath
 		success = cls_oaicitest.Deploy_Physim(ctx, HTML, node, workdir, script, options)

 	elif action == 'Build_Deploy_PhySim':
 		ctest_opt = test.findtext('ctest-opt') or ''
 		script = test.findtext('script')
-		options = f"{CONTAINERS.workspace} {ctest_opt}"
-		workdir = CONTAINERS.workspace
+		options = f"{CONTAINERS.eNBSourceCodePath} {ctest_opt}"
+		workdir = CONTAINERS.eNBSourceCodePath
 		success = cls_oaicitest.Deploy_Physim(ctx, HTML, node, workdir, script, options)

 	elif action == 'DeployCoreNetwork' or action == 'UndeployCoreNetwork':
@@ -169,7 +175,7 @@ def ExecuteActionWithParam(action, ctx, node):
 		CONTAINERS.yamlPath = test.findtext('yaml_path')
 		CONTAINERS.services = test.findtext('services')
 		CONTAINERS.num_attempts = int(test.findtext('num_attempts') or 1)
-		CONTAINERS.deploymentTag = CONTAINERS.branch
+		CONTAINERS.deploymentTag = cls_containerize.CreateTag(CONTAINERS.ranCommitID, CONTAINERS.ranBranch, CONTAINERS.ranAllowMerge)
 		if action == 'Deploy_Object':
 			success = CONTAINERS.DeployObject(ctx, node, HTML)
 		elif action == 'Stop_Object':
@@ -190,7 +196,10 @@ def ExecuteActionWithParam(action, ctx, node):
 			success = CONTAINERS.Create_Workspace(node, HTML)

 	elif action == 'LicenceAndFormattingCheck':
-		success = SCA.StaticCodeAnalysis.LicenceAndFormattingCheck(ctx, node, HTML, RAN.workspace, RAN.branch, RAN.merge, RAN.targetBranch)
+		success = SCA.LicenceAndFormattingCheck(ctx, node, HTML)
+
+	elif action == 'Cppcheck_Analysis':
+		success = SCA.CppCheckAnalysis(ctx, node, HTML)

 	elif action == 'Push_Local_Registry':
 		tag_prefix = test.findtext('tag_prefix') or ""
@@ -214,14 +223,14 @@ def ExecuteActionWithParam(action, ctx, node):
 	elif action == 'Custom_Command':
 		command = test.findtext('command')
 		# Allow referencing repository workspace path in XML via %%workspace%%
-		command = command.replace("%%workspace%%", CONTAINERS.workspace)
+		command = command.replace("%%workspace%%", CONTAINERS.eNBSourceCodePath)
 		success = cls_oaicitest.Custom_Command(HTML, node, command)

 	elif action == 'Custom_Script':
 		script = test.findtext('script')
 		args = test.findtext('args')
 		# Allow referencing repository workspace path in XML via %%workspace%%
-		script = script.replace("%%workspace%%", CONTAINERS.workspace)
+		script = script.replace("%%workspace%%", CONTAINERS.eNBSourceCodePath)
 		success = cls_oaicitest.Custom_Script(HTML, node, script, args)

 	elif action == 'Pull_Cluster_Image':
@@ -288,6 +297,7 @@ CiTestObj = cls_oaicitest.OaiCiTest()
 RAN = ran.RANManagement()
 HTML = cls_oai_html.HTMLManagement()
 CONTAINERS = cls_containerize.Containerize()
+SCA = cls_static_code_analysis.StaticCodeAnalysis()
 CLUSTER = cls_cluster.Cluster()

 #-----------------------------------------------------------
@@ -297,7 +307,7 @@ CLUSTER = cls_cluster.Cluster()
 import args_parse
 # Force local execution, move all execution targets to localhost
 force_local = False
-mode, force_local, date_fmt = args_parse.ArgsParse(sys.argv,CiTestObj,RAN,HTML,CONTAINERS,HELP,CLUSTER)
+mode, force_local, date_fmt = args_parse.ArgsParse(sys.argv,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER)
 fmt = "%(levelname)8s: %(message)s"
 if date_fmt:
    fmt = "[%(asctime)s] %(levelname)s %(message)s"
@@ -365,15 +375,15 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re
 	logging.info('\u001B[1m  Starting Scenario: ' + CiTestObj.testXMLfiles[0] + '\u001B[0m')
 	logging.info('\u001B[1m----------------------------------------\u001B[0m')
 	if re.match('^TesteNB$', mode, re.IGNORECASE):
-		if RAN.repository == '' or RAN.branch == '' or RAN.workspace == '':
+		if RAN.ranRepository == '' or RAN.ranBranch == '' or RAN.eNBSourceCodePath == '':
 			HELP.GenericHelp(CONST.Version)
-			if RAN.repository == '':
-				HELP.GitSrvHelp(RAN.repository, RAN.branch, RAN.merge, RAN.targetBranch)
-			if RAN.workspace == '':
-				HELP.SrvHelp(RAN.workspace)
+			if RAN.ranRepository == '':
+				HELP.GitSrvHelp(RAN.ranRepository, RAN.ranBranch, RAN.ranCommitID, RAN.ranAllowMerge, RAN.ranTargetBranch)
+			if RAN.eNBSourceCodePath == '':
+				HELP.eNBSrvHelp(RAN.eNBSourceCodePath)
 			sys.exit('Insufficient Parameter')
 	else:
-		if CiTestObj.repository == '' or CiTestObj.branch == '':
+		if CiTestObj.ranRepository == '' or CiTestObj.ranBranch == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('UE: Insufficient Parameter')

--- a/ci-scripts/pre-ci-check.sh
+++ b/ci-scripts/pre-ci-check.sh
@@ -1,96 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: LicenseRef-CSSL-1.0
-
-function usage {
-    echo "OAI GitLab MR validation script (Signed-off-by and merge commits)"
-    echo ""
-    echo "Usage:"
-    echo "------"
-    echo "    $0 -s <source-branch> -t <target-branch>"
-    echo ""
-    echo "Options:"
-    echo "--------"
-    echo "    -s"
-    echo "    The source branch of the merge request. Default value is current Git Branch (HEAD)"
-    echo ""
-    echo "    -t"
-    echo "    The target branch of the merge request. Default value is develop"
-    echo ""
-    echo "    -h"
-    echo "    Print this help message."
-    echo ""
-}
-
-# Parse arguments properly
-SOURCE_BRANCH=$(git rev-parse --abbrev-ref HEAD)
-TARGET_BRANCH="origin/develop"
-
-git fetch --quiet
-
-while getopts ":s:t:h" opt; do
-    case "$opt" in
-        s)
-            SOURCE_BRANCH="$OPTARG"
-            ;;
-        t)
-            TARGET_BRANCH="$OPTARG"
-            ;;
-        h)
-            usage
-            exit 0
-            ;;
-        :)
-            echo "Error: Option -$OPTARG requires a value."
-            echo ""
-            usage
-            exit 2
-            ;;
-        \?)
-            echo "Error: Invalid option -$OPTARG"
-            echo ""
-            usage
-            exit 2
-            ;;
-    esac
-done
-
-# ----------------------------
-# Merged commits
-# ----------------------------
-mergeCommits=$(git rev-list --merges --abbrev-commit "$TARGET_BRANCH".."$SOURCE_BRANCH")
-if [[ ! "$SOURCE_BRANCH" =~ ^(origin/)?integration_[0-9]{4}_w[0-9]{2}$ ]]; then
-    if [[ -n "$mergeCommits" ]]; then
-        message="> ERROR: Following merge commits are found in the source branch history. Please rebase your branch.\n>\n"
-        message+="> $(echo "$mergeCommits" | paste -sd ',' -)\n"
-        echo -e "$message"
-        exit 3
-    fi
-fi
-
-# ----------------------------
-# Check unsigned commits
-# ----------------------------
-unsignedCommits=$(
-    for c in $(git rev-list "$TARGET_BRANCH".."$SOURCE_BRANCH" --no-merges); do
-        if ! git log -1 --format=%B "$c" | grep -q "Signed-off-by:"; then
-            git log -1 --format='%h' "$c"
-        fi
-    done | paste -sd ","
-)
-
-# ----------------------------
-# Report unsigned commits
-# ----------------------------
-message=""
-
-if [ -n "$unsignedCommits" ]; then
-    message="> WARNING: The following commit(s) are missing a Signed-off-by:\n>\n> $unsignedCommits\n>\n"
-    message+="> Please use 'git commit -s' to sign your commits.\n>\n"
-    message+="> For detailed instructions, refer to the CONTRIBUTING file at the root of this repository."
-    echo -e "$message"
-    exit 1
-else
-    message="> All commits are signed off using 'git commit -s'."
-    echo -e "$message"
-    exit 0
-fi
--- a/ci-scripts/ran.py
+++ b/ci-scripts/ran.py
@@ -32,11 +32,12 @@ class RANManagement():

 	def __init__(self):
 		
-		self.repository = ''
-		self.branch = ''
-		self.merge = False
-		self.targetBranch = ''
-		self.workspace = ''
+		self.ranRepository = ''
+		self.ranBranch = ''
+		self.ranAllowMerge = False
+		self.ranCommitID = ''
+		self.ranTargetBranch = ''
+		self.eNBSourceCodePath = ''
 		self.Initialize_eNB_args = ''
 		self.imageKind = ''
 		self.eNBOptions = ['', '', '']
@@ -56,7 +57,7 @@ class RANManagement():
 			raise ValueError(f"{node=}")
 		logging.debug('Starting eNB/gNB on server: ' + node)

-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		cmd = cls_cmd.getConnection(node)
 		
 		# Initialize_eNB_args usually start with -O and followed by the location in repository
@@ -102,7 +103,7 @@ class RANManagement():

 	def TerminateeNB(self, ctx, node, HTML, to_analyze):
 		logging.debug('Stopping eNB/gNB on server: ' + node)
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath
 		cmd = cls_cmd.getConnection(node)
 		ret = cmd.run('ps -aux | grep --color=never -e softmodem | grep -v grep')
 		result = re.search('-softmodem', ret.stdout)
@@ -137,7 +138,7 @@ class RANManagement():

 	def AnalyzeRTStats(self, HTML, node, ctx, thresholds):
 		logging.info(f'Analyzing realtime stats from server: {node}')
-		lSourcePath = self.workspace
+		lSourcePath = self.eNBSourceCodePath

 		logdir = f'{lSourcePath}/cmake_targets'
 		with cls_cmd.getConnection(node) as cmd:
--- a/ci-scripts/run_locally.sh
+++ b/ci-scripts/run_locally.sh
@@ -30,13 +30,15 @@ docker tag oai-nr-ue oai-ci/oai-nr-ue:develop-${SHORT_COMMIT_SHA}
 docker tag oai-gnb oai-ci/oai-gnb:develop-${SHORT_COMMIT_SHA}
 docker tag oai-nr-cuup oai-ci/oai-nr-cuup:develop-${SHORT_COMMIT_SHA}

-python3 main.py --mode=InitiateHtml --repository=NONE --branch=${CURRENT_BRANCH} \
+python3 main.py --mode=InitiateHtml --ranRepository=NONE --ranBranch=${CURRENT_BRANCH} \
+    --ranCommitID=${COMMIT_SHA} --ranAllowMerge=false \
+    --ranTargetBranch=NONE \
    --XMLTestFile=xml_files/${TESTCASE} --local --datefmt="%H:%M:%S"

-python3 main.py --mode=TesteNB --repository=NONE --branch=${CURRENT_BRANCH} \
-    --ranAllowMerge=false \
-    --targetBranch=NONE \
-    --workspace=${REPO_PATH} \
+python3 main.py --mode=TesteNB --ranRepository=NONE --ranBranch=${CURRENT_BRANCH} \
+    --ranCommitID=${COMMIT_SHA} --ranAllowMerge=false \
+    --ranTargetBranch=NONE \
+    --eNBSourceCodePath=${REPO_PATH} \
    --XMLTestFile=${TESTCASE} --local --datefmt="%H:%M:%S"
 RET=$?

--- a/ci-scripts/scripts/create_workspace.sh
+++ b/ci-scripts/scripts/create_workspace.sh
@@ -6,16 +6,22 @@ function die() {
  exit 1
 }

-[ $# -eq 3 ] || die "usage: $0 <directory> <repository> <branch>"
+[ $# -ge 3 -a $# -le 4 ] || die "usage: $0 <directory> <repository> <ref> [<merge-ref>]"

 set -ex

 dir=$1
 repo=$2
-branch=$3
+ref=$3
+merge=$4

 rm -rf ${dir}
-git clone --depth=1 --branch "${branch}" "${repo}" "${dir}"
+git clone --filter=blob:none -n ${repo} ${dir}
 cd ${dir}
+git config user.email "jenkins@openairinterface.org"
+git config user.name "OAI Jenkins"
+git config advice.detachedHead false
 mkdir -p cmake_targets/log
+git checkout -f ${ref}
+[ -n "${merge}" ] && git fetch origin ${merge} && git merge --ff FETCH_HEAD -m "Temporary merge for CI"
 exit 0
--- a/ci-scripts/scripts/vvdn-activate-carriers.sh
+++ b/ci-scripts/scripts/vvdn-activate-carriers.sh
@@ -1,48 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: MIT
-
-set -e
-
-RU_IP="10.10.0.111"
-RU_HOST="root@10.10.0.111"
-
-ssh_exec() {
-    ssh $RU_HOST $@ </dev/null
-}
-
-echo "→ Checking for PTP fluctuations in the last 60 minutes..."
-
-logs=$(journalctl -u ptp4l.service --since "60 minutes ago")
-
-check_ptp=$(echo "$logs" | awk '
-/rms/ {
-    rms=$8
-    if (rms > 100) {
-        print "✗ PTP FLUCTUATION DETECTED → " $0
-        exit 0
-    }
-}
-')
-
-if [ -n "$check_ptp" ]; then
-    echo "$check_ptp"
-else
-    echo "✓ No PTP fluctuations detected."
-fi
-
-echo "→ Checking if VVDN LPRU is PTP synchronized (timeout 1 min)..."
-if ssh_exec 'timeout 1m sh -c "tail -F /var/log/synctimingptp2.log | grep -m 1 -F ,\ synchronized"'; then
-    echo "✓ VVDN LPRU synchronized"
-else
-    echo "✗ VVDN LPRU not synchronized"
-fi
-
-echo "→ Checking TX/RX carrier configuration..."
-if ssh_exec 'sysrepocfg -X -d running -f xml | grep -q "<active>INACTIVE</active>"'; then
-    echo "→ Some carriers are not active, activating via sysrepocfg..."
-    ssh_exec 'sysrepocfg -X -d running -f xml | sed "s/<active>INACTIVE<\/active>/<active>ACTIVE<\/active>/g" | sysrepocfg -I -d running -f xml'
-    echo "✓ All TX/RX carriers activated."
-else
-    echo "✓ All TX/RX carriers already activated."
-fi
-exit 0
--- a/ci-scripts/scripts/vvdn-inactivate-carriers.sh
+++ b/ci-scripts/scripts/vvdn-inactivate-carriers.sh
@@ -1,14 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: MIT
-
-set -e
-
-RU_HOST="root@10.10.0.111"
-
-ssh_exec() {
-    ssh $RU_HOST $@ </dev/null
-}
-
-echo "→ Inactivating TX/RX carriers on VVDN LPRU..."
-ssh_exec 'sysrepocfg -X -d running -f xml | sed "s/ACTIVE/INACTIVE/g" | sysrepocfg -I -d running -f xml'
-echo "✓ TX/RX carriers inactivated."
--- a/ci-scripts/tests/build.py
+++ b/ci-scripts/tests/build.py
@@ -24,7 +24,7 @@ class TestBuild(unittest.TestCase):
 		self._d = tempfile.mkdtemp()
 		logging.warning(f"temporary directory: {self._d}")
 		self.node = 'localhost'
-		self.cont.workspace = self._d
+		self.cont.eNBSourceCodePath = self._d
 		self.ctx = TestCaseCtx.Default(tempfile.mkdtemp())

 	def tearDown(self):
@@ -33,5 +33,10 @@ class TestBuild(unittest.TestCase):
 			cmd.run(f"rm -rf {self._d}")
 			cmd.run(f'rm -rf {self.ctx.logPath}')

+	def test_build_proxy(self):
+		self.cont.proxyCommit = "b64d9bce986b38ca59e8582864ade3fcdd05c0dc"
+		success = self.cont.BuildProxy(self.ctx, self.node, self.html)
+		self.assertTrue(success)
+
 if __name__ == '__main__':
 	unittest.main()
--- a/ci-scripts/tests/deployment.py
+++ b/ci-scripts/tests/deployment.py
@@ -41,9 +41,10 @@ class TestDeploymentMethods(unittest.TestCase):
 		self.ci = cls_oaicitest.OaiCiTest()
 		self.cont = cls_containerize.Containerize()
 		self.cont.yamlPath = ''
-		self.cont.merge = True
-		self.cont.branch = ''
-		self.cont.workspace = os.getcwd()
+		self.cont.ranAllowMerge = True
+		self.cont.ranBranch = ''
+		self.cont.ranCommitID = ''
+		self.cont.eNBSourceCodePath = os.getcwd()
 		self.cont.num_attempts = 3
 		self.node = 'localhost'
 		self.ctx = TestCaseCtx.Default(tempfile.mkdtemp())
@@ -135,12 +136,13 @@ class TestDeploymentMethods(unittest.TestCase):
 		self.assertTrue(undeploy)

 	def test_create_workspace(self):
-		self.cont.workspace = tempfile.mkdtemp()
-		self.cont.repository = "https://gitlab.eurecom.fr/oai/openairinterface5g.git"
-		self.cont.branch = "develop"
+		self.cont.eNBSourceCodePath = tempfile.mkdtemp()
+		self.cont.ranRepository = "https://gitlab.eurecom.fr/oai/openairinterface5g.git"
+		self.cont.ranCommitID = "05f9c975eeecbca1bdff5940affad44465f1301f"
+		self.cont.ranBranch = "develop"
 		ws = self.cont.Create_Workspace(self.node, self.html)
 		with cls_cmd.LocalCmd() as cmd:
-			cmd.run(f"rm -rf {self.cont.workspace}")
+			cmd.run(f"rm -rf {self.cont.eNBSourceCodePath}")
 		self.assertTrue(ws)

 	def test_undeploy_loganalysis(self):
--- a/ci-scripts/tests/ping-iperf.py
+++ b/ci-scripts/tests/ping-iperf.py
@@ -82,17 +82,5 @@ class TestPingIperf(unittest.TestCase):
 		success = self.ci.Iperf(self.ctx, self.node, self.html, infra_file=infra_file)
 		self.assertTrue(success)

-	def test_iperf_new_bindport(self):
-		self.ci.iperf_args = "-u -t 5 -b 22M -O 0 -p 10000 -B 127.0.0.3"
-		self.ci.svr_id = "test"
-		self.ci.svr_node = "localhost"
-		self.ci.iperf_packetloss_threshold = "0"
-		self.ci.iperf_bitrate_threshold = "0"
-		self.ci.iperf_profile = "balanced"
-		infra_file = "tests/config/infra_ping_iperf.yaml"
-		# TODO Should need nothing but options and UE(s) to use
-		success = self.ci.Iperf(self.ctx, self.node, self.html, infra_file=infra_file)
-		self.assertTrue(success)
-
 if __name__ == '__main__':
 	unittest.main()
--- a/ci-scripts/tests/pull-clean-int-registry.py
+++ b/ci-scripts/tests/pull-clean-int-registry.py
@@ -22,7 +22,7 @@ class TestDeploymentMethods(unittest.TestCase):
 		self.html = cls_oai_html.HTMLManagement()
 		self.html.testCaseId = "000000"
 		self.cont = cls_containerize.Containerize()
-		self.cont.workspace = os.getcwd()
+		self.cont.eNBSourceCodePath = os.getcwd()

 	def test_pull_clean_local_reg(self):
 		# the pull function has the authentication at the internal cluster hardcoded
--- a/ci-scripts/tests/test-runner/run.sh
+++ b/ci-scripts/tests/test-runner/run.sh
@@ -9,17 +9,21 @@ rm -f ${file}
 cd ../../
 python3 main.py \
  --mode=InitiateHtml \
-  --repository=https://gitlab.eurecom.fr/oai/openairinterface5g.git \
-  --branch=${branch} \
+  --ranRepository=https://gitlab.eurecom.fr/oai/openairinterface5g.git \
+  --ranBranch=${branch} \
+  --ranCommitID=${commit} \
+  --ranAllowMerge=true \
+  --ranTargetBranch=develop \
  --XMLTestFile=tests/test-runner/test.xml

 python3 main.py \
  --mode=TesteNB \
-  --repository=https://gitlab.eurecom.fr/oai/openairinterface5g.git \
-  --branch=${branch} \
+  --ranRepository=https://gitlab.eurecom.fr/oai/openairinterface5g.git \
+  --ranBranch=${branch} \
+  --ranCommitID=${commit} \
  --ranAllowMerge=true \
-  --targetBranch=develop \
-  --workspace=NONE \
+  --ranTargetBranch=develop \
+  --eNBSourceCodePath=NONE \
  --XMLTestFile=tests/test-runner/test.xml

 python3 main.py \
--- a/ci-scripts/xml_class_list.yml
+++ b/ci-scripts/xml_class_list.yml
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: LicenseRef-CSSL-1.0
+  - Build_Proxy
  - Build_Cluster_Image
  - Pull_Cluster_Image
  - Build_eNB
@@ -22,6 +23,7 @@
  - Deploy_Object
  - Stop_Object
  - Undeploy_Object
+  - Cppcheck_Analysis
  - Deploy_Run_OC_PhySim
  - Build_Deploy_PhySim
  - LicenceAndFormattingCheck
--- a/ci-scripts/xml_files/container_5g_rfsim_n2_ho.xml
+++ b/ci-scripts/xml_files/container_5g_rfsim_n2_ho.xml
@@ -41,17 +41,6 @@
    <node>localhost</node>
  </testCase>

-  <testCase>
-    <class>Ping</class>
-    <desc>UL ping ext-dn from NR-UE</desc>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <ping_args>-c 20 -i0.5</ping_args>
-    <ping_packetloss_threshold>80</ping_packetloss_threshold>
-  </testCase>
-
  <testCase>
    <class>Ping</class>
    <desc>Ping NR-UE from ext-dn</desc>
--- a/ci-scripts/xml_files/container_5g_rfsim_u0_25prb.xml
+++ b/ci-scripts/xml_files/container_5g_rfsim_u0_25prb.xml
@@ -23,7 +23,7 @@
    <desc>Deploy OAI 5G CoreNetwork</desc>
    <node>localhost</node>
    <yaml_path>ci-scripts/yaml_files/5g_rfsimulator_u0_25prb</yaml_path>
-    <services>mysql oai-amf oai-smf oai-pcf oai-upf oai-ext-dn</services>
+    <services>mysql oai-amf oai-smf oai-upf oai-ext-dn</services>
  </testCase>

  <testCase>
@@ -41,6 +41,28 @@
    <node>localhost</node>
  </testCase>

+  <testCase>
+    <class>Ping</class>
+    <desc>Ping ext-dn from NR-UE</desc>
+    <id>rfsim5g_ue</id>
+    <node>localhost</node>
+    <svr_id>rfsim5g_ext_dn</svr_id>
+    <svr_node>localhost</svr_node>
+    <ping_args>-c 20 -i 0.25</ping_args>
+    <ping_packetloss_threshold>5</ping_packetloss_threshold>
+  </testCase>
+
+  <testCase>
+    <class>Ping</class>
+    <desc>Ping NR-UE from ext-dn</desc>
+    <id>rfsim5g_ext_dn</id>
+    <node>localhost</node>
+    <svr_id>rfsim5g_ue</svr_id>
+    <svr_node>localhost</svr_node>
+    <ping_args>-c 20 -i 0.25</ping_args>
+    <ping_packetloss_threshold>5</ping_packetloss_threshold>
+  </testCase>
+
  <testCase>
    <class>Attach_UE</class>
    <desc>Verify 2nd PDU session is up</desc>
@@ -49,109 +71,14 @@
  </testCase>

  <testCase>
-    <class>Custom_Command</class>
-    <desc>Configure policy routing for PDU2 source IP</desc>
-    <may_fail>true</may_fail>
-    <node>localhost</node>
-    <command>docker exec rfsim5g-oai-nr-ue sh -c "ip rule add from 12.1.2.2/32 table 1002 prio 1002; ip route replace default dev oaitun_ue1p2 src 12.1.2.2 table 1002"</command>
-  </testCase>
-
-  <testCase>
-    <class>Custom_Command</class>
-    <desc>Ping ext-dn from UE PDU session 1 interface</desc>
-    <node>localhost</node>
-    <command>docker exec rfsim5g-oai-nr-ue ping -I oaitun_ue1 -c 10 192.168.72.135</command>
-  </testCase>
-
-  <testCase>
-    <class>Custom_Command</class>
-    <desc>Ping ext-dn from UE PDU session 2 interface</desc>
-    <node>localhost</node>
-    <command>docker exec rfsim5g-oai-nr-ue ping -I oaitun_ue1p2 -c 10 192.168.72.135</command>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (UL/1Mbps/UDP)(6 sec) QFI 1 (default) flow on PDU session 1 (port 5201)</desc>
-    <iperf_args>-u -b 1M -t 6 -B 12.1.1.2 -p 5201</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>10</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (UL/1Mbps/UDP)(6 sec) QFI 2 flow on PDU session 1 (port 52080)</desc>
-    <iperf_args>-u -b 1M -t 6 -B 12.1.1.2 -p 52080</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>10</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (UL/1Mbps/UDP)(6 sec) QFI 3 flow on PDU session 1 (port 52081)</desc>
-    <iperf_args>-u -b 1M -t 6 -B 12.1.1.2 -p 52081</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>10</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (UL/1Mbps/UDP)(6 sec) default flow on PDU session 2 (port 5201)</desc>
-    <iperf_args>-u -b 1M -t 6 -B 12.1.2.2 -p 5201</iperf_args>
+    <class>Ping</class>
+    <desc>Ping ext-dn from NR-UE on PDU session ID 2</desc>
    <id>rfsim5g_ue_pdu_2</id>
    <node>localhost</node>
    <svr_id>rfsim5g_ext_dn</svr_id>
    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>10</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (DL/1Mbps/UDP)(6 sec) QFI 1 (default) flow on PDU session 1 (port 5201)</desc>
-    <iperf_args>-u -b 1M -t 6 -R -B 12.1.1.2 -p 5201</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>10</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (DL/1Mbps/UDP)(6 sec) QFI 2 flow on PDU session 1 (port 52080)</desc>
-    <iperf_args>-u -b 1M -t 6 -R -B 12.1.1.2 -p 52080</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>10</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (DL/1Mbps/UDP)(6 sec) QFI 3 flow on PDU session 1 (port 52081)</desc>
-    <iperf_args>-u -b 1M -t 6 -R -B 12.1.1.2 -p 52081</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>10</iperf_bitrate_threshold>
+    <ping_args>-c 20 -i 0.25</ping_args>
+    <ping_packetloss_threshold>5</ping_packetloss_threshold>
  </testCase>

  <testCase>
--- a/ci-scripts/xml_files/container_5g_zmq_2x2.xml
+++ b/ci-scripts/xml_files/container_5g_zmq_2x2.xml
@@ -1,109 +0,0 @@
-<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
-
-<testCaseList>
-  <htmlTabRef>zmq-5gnr-tdd-2x2</htmlTabRef>
-  <htmlTabName>Monolithic SA TDD 2x2 gNB with zmq radio</htmlTabName>
-  <htmlTabIcon>wrench</htmlTabIcon>
-
-  <testCase>
-    <class>Pull_Local_Registry</class>
-    <desc>Pull Images from Local Registry</desc>
-    <node>localhost</node>
-    <images>oai-gnb-asan oai-nr-ue-asan</images>
-  </testCase>
-
-  <testCase>
-    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
-    <node>localhost</node>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy OAI 5G CoreNetwork</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_2x2/</yaml_path>
-    <services>mysql oai-amf oai-smf oai-upf oai-ext-dn</services>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy OAI 5G gNB+UE RF sim SA</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_2x2</yaml_path>
-    <services>oai-gnb oai-nr-ue</services>
-  </testCase>
-
-  <testCase>
-    <class>Attach_UE</class>
-    <desc>Attach OAI UE (Wait for IP)</desc>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping ext-dn from NR-UE</desc>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <ping_args>-c 20 -i 0.25</ping_args>
-    <ping_packetloss_threshold>5</ping_packetloss_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping NR-UE from ext-dn</desc>
-    <id>rfsim5g_ext_dn</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ue</svr_id>
-    <svr_node>localhost</svr_node>
-    <ping_args>-c 20 -i 0.25</ping_args>
-    <ping_packetloss_threshold>5</ping_packetloss_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (DL/10Mbps/UDP)(20 sec)</desc>
-    <iperf_args>-u -b 10M -t 20 -R</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>90</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (UL/3Mbps/UDP)(20 sec)</desc>
-    <iperf_args>-u -b 3M -t 20</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>90</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Undeploy_Object</class>
-    <always_exec>true</always_exec>
-    <desc>Undeploy all OAI 5G stack</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_2x2</yaml_path>
-    <analysis>
-      <services>oai-gnb=RetxCheck=1,0,0,0 oai-gnb=EndsWithBye oai-nr-ue</services>
-    </analysis>
-  </testCase>
-
-  <testCase>
-    <class>Clean_Test_Server_Images</class>
-    <always_exec>true</always_exec>
-    <desc>Clean Test Images on Test Server</desc>
-    <node>localhost</node>
-    <images>oai-gnb-asan oai-nr-ue-asan</images>
-  </testCase>
-
-</testCaseList>
--- a/ci-scripts/xml_files/container_5g_zmq_ocudu_1x1.xml
+++ b/ci-scripts/xml_files/container_5g_zmq_ocudu_1x1.xml
@@ -1,109 +0,0 @@
-<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
-
-<testCaseList>
-  <htmlTabRef>ocudu-5gnr-tdd-1x1</htmlTabRef>
-  <htmlTabName>OCUDU gnb split8 with OAI UE</htmlTabName>
-  <htmlTabIcon>wrench</htmlTabIcon>
-
-  <testCase>
-    <class>Pull_Local_Registry</class>
-    <desc>Pull Images from Local Registry</desc>
-    <node>localhost</node>
-    <images>oai-gnb-asan oai-nr-ue-asan</images>
-  </testCase>
-
-  <testCase>
-    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
-    <node>localhost</node>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy OAI 5G CoreNetwork</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_1x1_ocudu</yaml_path>
-    <services>mysql oai-amf oai-smf oai-upf oai-ext-dn</services>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy OCUDU Split 8 gNB + OAI UE</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_1x1_ocudu</yaml_path>
-    <services>ocudu-gnb oai-nr-ue</services>
-  </testCase>
-
-  <testCase>
-    <class>Attach_UE</class>
-    <desc>Attach OAI UE (Wait for IP)</desc>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping ext-dn from NR-UE</desc>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <ping_args>-c 20 -i 0.25</ping_args>
-    <ping_packetloss_threshold>5</ping_packetloss_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping NR-UE from ext-dn</desc>
-    <id>rfsim5g_ext_dn</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ue</svr_id>
-    <svr_node>localhost</svr_node>
-    <ping_args>-c 20 -i 0.25</ping_args>
-    <ping_packetloss_threshold>5</ping_packetloss_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (DL/3Mbps/UDP)(20 sec)</desc>
-    <iperf_args>-u -b 3M -t 20 -R</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>90</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (UL/3Mbps/UDP)(20 sec)</desc>
-    <iperf_args>-u -b 3M -t 20</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>90</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Undeploy_Object</class>
-    <always_exec>true</always_exec>
-    <desc>Undeploy all OAI 5G stack</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_1x1_ocudu</yaml_path>
-    <analysis>
-      <services>oai-nr-ue</services>
-    </analysis>
-  </testCase>
-
-  <testCase>
-    <class>Clean_Test_Server_Images</class>
-    <always_exec>true</always_exec>
-    <desc>Clean Test Images on Test Server</desc>
-    <node>localhost</node>
-    <images>oai-gnb-asan oai-nr-ue-asan</images>
-  </testCase>
-
-</testCaseList>
--- a/ci-scripts/xml_files/container_5g_zmq_ocudu_2x2.xml
+++ b/ci-scripts/xml_files/container_5g_zmq_ocudu_2x2.xml
@@ -1,109 +0,0 @@
-<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
-
-<testCaseList>
-  <htmlTabRef>ocudu-5gnr-tdd-2x2</htmlTabRef>
-  <htmlTabName>OCUDU gnb split8 with OAI UE</htmlTabName>
-  <htmlTabIcon>wrench</htmlTabIcon>
-
-  <testCase>
-    <class>Pull_Local_Registry</class>
-    <desc>Pull Images from Local Registry</desc>
-    <node>localhost</node>
-    <images>oai-gnb-asan oai-nr-ue-asan</images>
-  </testCase>
-
-  <testCase>
-    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
-    <node>localhost</node>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy OAI 5G CoreNetwork</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_2x2_ocudu</yaml_path>
-    <services>mysql oai-amf oai-smf oai-upf oai-ext-dn</services>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy OCUDU Split 8 gNB + OAI UE</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_2x2_ocudu</yaml_path>
-    <services>ocudu-gnb oai-nr-ue</services>
-  </testCase>
-
-  <testCase>
-    <class>Attach_UE</class>
-    <desc>Attach OAI UE (Wait for IP)</desc>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping ext-dn from NR-UE</desc>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <ping_args>-c 20 -i 0.25</ping_args>
-    <ping_packetloss_threshold>5</ping_packetloss_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping NR-UE from ext-dn</desc>
-    <id>rfsim5g_ext_dn</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ue</svr_id>
-    <svr_node>localhost</svr_node>
-    <ping_args>-c 20 -i 0.25</ping_args>
-    <ping_packetloss_threshold>5</ping_packetloss_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (DL/10Mbps/UDP)(20 sec)</desc>
-    <iperf_args>-u -b 1M -t 20 -R</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>90</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>Iperf (UL/3Mbps/UDP)(20 sec)</desc>
-    <iperf_args>-u -b 1M -t 20</iperf_args>
-    <id>rfsim5g_ue</id>
-    <node>localhost</node>
-    <svr_id>rfsim5g_ext_dn</svr_id>
-    <svr_node>localhost</svr_node>
-    <iperf_packetloss_threshold>5</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>90</iperf_bitrate_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Undeploy_Object</class>
-    <always_exec>true</always_exec>
-    <desc>Undeploy all OAI 5G stack</desc>
-    <node>localhost</node>
-    <yaml_path>ci-scripts/yaml_files/5g_zmq_radio_2x2_ocudu</yaml_path>
-    <analysis>
-      <services>oai-nr-ue</services>
-    </analysis>
-  </testCase>
-
-  <testCase>
-    <class>Clean_Test_Server_Images</class>
-    <always_exec>true</always_exec>
-    <desc>Clean Test Images on Test Server</desc>
-    <node>localhost</node>
-    <images>oai-gnb-asan oai-nr-ue-asan</images>
-  </testCase>
-
-</testCaseList>
--- a/ci-scripts/xml_files/container_image_build.xml
+++ b/ci-scripts/xml_files/container_image_build.xml
@@ -7,7 +7,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>obelix</node>
  </testCase>

--- a/ci-scripts/xml_files/container_image_build_arm.xml
+++ b/ci-scripts/xml_files/container_image_build_arm.xml
@@ -7,7 +7,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>gracehopper3-oai</node>
  </testCase>

--- a/ci-scripts/xml_files/container_image_build_jetson.xml
+++ b/ci-scripts/xml_files/container_image_build_jetson.xml
@@ -7,7 +7,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>jetson3-oai</node>
  </testCase>

--- a/ci-scripts/xml_files/container_l2sim_proxy.xml
+++ b/ci-scripts/xml_files/container_l2sim_proxy.xml
@@ -0,0 +1,15 @@
+<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
+
+<testCaseList>
+  <htmlTabRef>l2sim-4glte-5gnr-proxy-build</htmlTabRef>
+  <htmlTabName>Build L2sim proxy image</htmlTabName>
+  <htmlTabIcon>wrench</htmlTabIcon>
+
+  <testCase>
+    <class>Build_Proxy</class>
+    <desc>Build L2sim Proxy Image</desc>
+    <node>localhost</node>
+    <proxy_commit>b64d9bce986b38ca59e8582864ade3fcdd05c0dc</proxy_commit>
+  </testCase>
+
+</testCaseList>
--- a/ci-scripts/xml_files/container_lte_b200_fdd_05Mhz_tm1.xml
+++ b/ci-scripts/xml_files/container_lte_b200_fdd_05Mhz_tm1.xml
@@ -34,7 +34,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>hutch</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_fdd_05Mhz_tm1_if4_5.xml
+++ b/ci-scripts/xml_files/container_lte_b200_fdd_05Mhz_tm1_if4_5.xml
@@ -34,7 +34,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>hutch</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_fdd_05Mhz_tm1_no_rrc_activity.xml
+++ b/ci-scripts/xml_files/container_lte_b200_fdd_05Mhz_tm1_no_rrc_activity.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>hutch</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_fdd_10Mhz_tm1.xml
+++ b/ci-scripts/xml_files/container_lte_b200_fdd_10Mhz_tm1.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>hutch</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_fdd_10Mhz_tm1_cdrx.xml
+++ b/ci-scripts/xml_files/container_lte_b200_fdd_10Mhz_tm1_cdrx.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>hutch</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_fdd_10Mhz_tm1_oaiue.xml
+++ b/ci-scripts/xml_files/container_lte_b200_fdd_10Mhz_tm1_oaiue.xml
@@ -35,7 +35,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>hutch</node>
  </testCase>

@@ -54,7 +54,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 1</desc>
    <node>carabe</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_fdd_20Mhz_tm1.xml
+++ b/ci-scripts/xml_files/container_lte_b200_fdd_20Mhz_tm1.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>hutch</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_tdd_05Mhz_tm1.xml
+++ b/ci-scripts/xml_files/container_lte_b200_tdd_05Mhz_tm1.xml
@@ -34,7 +34,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>starsky</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_tdd_05Mhz_tm1_if4_5.xml
+++ b/ci-scripts/xml_files/container_lte_b200_tdd_05Mhz_tm1_if4_5.xml
@@ -28,7 +28,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>starsky</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_tdd_10Mhz_tm1.xml
+++ b/ci-scripts/xml_files/container_lte_b200_tdd_10Mhz_tm1.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>starsky</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_tdd_20Mhz_tm1.xml
+++ b/ci-scripts/xml_files/container_lte_b200_tdd_20Mhz_tm1.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>starsky</node>
  </testCase>

--- a/ci-scripts/xml_files/container_lte_b200_tdd_20Mhz_tm1_default_scheduler.xml
+++ b/ci-scripts/xml_files/container_lte_b200_tdd_20Mhz_tm1_default_scheduler.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>starsky</node>
  </testCase>

--- a/ci-scripts/xml_files/container_sa_aerial_quectel.xml
+++ b/ci-scripts/xml_files/container_sa_aerial_quectel.xml
@@ -31,7 +31,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>gracehopper1-oai</node>
  </testCase>

@@ -122,7 +122,7 @@
    <node>gracehopper1-oai</node>
    <yaml_path>ci-scripts/yaml_files/sa_gnb_aerial</yaml_path>
    <analysis>
-      <services>oai-gnb-aerial=EndsWithBye</services>
+      <services>oai-gnb-aerial=RetxCheck=20,100,100,100 oai-gnb-aerial=EndsWithBye</services>
    </analysis>
  </testCase>

--- a/ci-scripts/xml_files/container_sa_aerial_quectel_ul_heavy.xml
+++ b/ci-scripts/xml_files/container_sa_aerial_quectel_ul_heavy.xml
@@ -31,7 +31,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>gracehopper1-oai</node>
  </testCase>

@@ -111,7 +111,7 @@
    <node>gracehopper1-oai</node>
    <yaml_path>ci-scripts/yaml_files/sa_gnb_aerial_ul</yaml_path>
    <analysis>
-      <services>oai-gnb-aerial=EndsWithBye</services>
+      <services>oai-gnb-aerial=RetxCheck=20,100,100,100 oai-gnb-aerial=EndsWithBye</services>
    </analysis>
  </testCase>

--- a/ci-scripts/xml_files/container_sa_b200_quectel.xml
+++ b/ci-scripts/xml_files/container_sa_b200_quectel.xml
@@ -27,7 +27,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>ofqot</node>
  </testCase>

--- a/ci-scripts/xml_files/container_sa_fhi72_benetel_2x2_100MHz_9b_mplane_amariue.xml
+++ b/ci-scripts/xml_files/container_sa_fhi72_benetel_2x2_100MHz_9b_mplane_amariue.xml
@@ -1,149 +0,0 @@
-<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
-
-<testCaseList>
-  <htmlTabRef>test-5g-fhi72-benetel-2x2-100MHz-9b-mplane</htmlTabRef>
-  <htmlTabName>100 MHz 2x2 9b TDD SA Benetel M-plane</htmlTabName>
-  <htmlTabIcon>tasks</htmlTabIcon>
-
-  <testCase>
-    <class>DeployCoreNetwork</class>
-    <desc>Initialize 5G Core</desc>
-    <cn_id>oc-cn5g-00105</cn_id>
-  </testCase>
-
-  <testCase>
-    <class>Custom_Script</class>
-    <desc>Configure system for low-latency RT performance</desc>
-    <node>cacofonix</node>
-    <script>yaml_files/sa_fhi_7.2_benetel550_2x2_100MHz_9b_mplane_gnb/setup_config.sh</script>
-  </testCase>
-
-  <testCase>
-    <class>Pull_Local_Registry</class>
-    <desc>Pull Images from Local Registry</desc>
-    <node>cacofonix</node>
-    <images>oai-gnb-fhi72</images>
-  </testCase>
-
-  <testCase>
-    <class>Initialize_UE</class>
-    <desc>Initialize Amarisoft UE</desc>
-    <id>amarisoft_00105_100MHz</id>
-  </testCase>
-
-  <testCase>
-    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
-    <node>cacofonix</node>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy gNB (TDD/Band78/100MHz/Benetel) in a container</desc>
-    <node>cacofonix</node>
-    <yaml_path>ci-scripts/yaml_files/sa_fhi_7.2_benetel550_2x2_100MHz_9b_mplane_gnb</yaml_path>
-  </testCase>
-
-  <testCase>
-    <class>Attach_UE</class>
-    <desc>Attach UE</desc>
-    <id>amarisoft_ue_1</id>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping: 100 pings in 10 sec</desc>
-    <id>amarisoft_ue_1</id>
-    <svr_id>oc-cn5g-00105</svr_id>
-    <ping_args>-c 100 -i 0.1</ping_args>
-    <ping_packetloss_threshold>1</ping_packetloss_threshold>
-    <ping_rttavg_threshold>15</ping_rttavg_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (DL/250Mbps/UDP)(30 sec)</desc>
-    <iperf_args>-u -b 250M -t 30 -R</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>80</iperf_bitrate_threshold>
-    <iperf_profile>balanced</iperf_profile>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (UL/35Mbps/UDP)(30 sec)</desc>
-    <iperf_args>-u -b 35M -t 30</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>80</iperf_bitrate_threshold>
-    <iperf_profile>balanced</iperf_profile>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (DL/TCP)(30 sec)</desc>
-    <iperf_args>-t 30 -R</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_tcp_rate_target>40</iperf_tcp_rate_target>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (UL/TCP)(30 sec)</desc>
-    <iperf_args>-t 30</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_tcp_rate_target>10</iperf_tcp_rate_target>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Detach_UE</class>
-    <always_exec>true</always_exec>
-    <desc>Detach UE</desc>
-    <id>amarisoft_ue_1</id>
-  </testCase>
-
-  <testCase>
-    <class>Terminate_UE</class>
-    <always_exec>true</always_exec>
-    <desc>Terminate UE</desc>
-    <id>amarisoft_00105_100MHz</id>
-  </testCase>
-
-  <testCase>
-    <class>IdleSleep</class>
-    <desc>Sleep</desc>
-    <idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
-  </testCase>
-
-  <testCase>
-    <class>Undeploy_Object</class>
-    <always_exec>true</always_exec>
-    <desc>Undeploy gNB</desc>
-    <node>cacofonix</node>
-    <yaml_path>ci-scripts/yaml_files/sa_fhi_7.2_benetel550_2x2_100MHz_9b_mplane_gnb</yaml_path>
-    <analysis>
-      <services>oai-gnb=EndsWithBye</services>
-    </analysis>
-  </testCase>
-
-  <testCase>
-    <class>Clean_Test_Server_Images</class>
-    <always_exec>true</always_exec>
-    <desc>Clean Test Images on Test Server</desc>
-    <node>cacofonix</node>
-    <images>oai-gnb-fhi72</images>
-  </testCase>
-
-  <testCase>
-    <class>UndeployCoreNetwork</class>
-    <always_exec>true</always_exec>
-    <desc>Terminate 5G Core</desc>
-    <cn_id>oc-cn5g-00105</cn_id>
-  </testCase>
-
-</testCaseList>
--- a/ci-scripts/xml_files/container_sa_fhi72_benetel_4x4_40MHz_9b_mplane_amariue.xml
+++ b/ci-scripts/xml_files/container_sa_fhi72_benetel_4x4_40MHz_9b_mplane_amariue.xml
@@ -1,149 +0,0 @@
-<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
-
-<testCaseList>
-  <htmlTabRef>test-5g-fhi72-benetel-40Mhz-4x4-9b-mplane</htmlTabRef>
-  <htmlTabName>40MHz 4x4 9b TDD SA Benetel M-plane</htmlTabName>
-  <htmlTabIcon>tasks</htmlTabIcon>
-
-  <testCase>
-    <class>DeployCoreNetwork</class>
-    <desc>Initialize 5G Core</desc>
-    <cn_id>oc-cn5g-00105</cn_id>
-  </testCase>
-
-  <testCase>
-    <class>Custom_Script</class>
-    <desc>Configure system for low-latency RT performance</desc>
-    <node>cacofonix</node>
-    <script>yaml_files/sa_fhi_7.2_benetel550_4x4_40MHz_9b_mplane_gnb/setup_config.sh</script>
-  </testCase>
-
-  <testCase>
-    <class>Pull_Local_Registry</class>
-    <desc>Pull Images from Local Registry</desc>
-    <node>cacofonix</node>
-    <images>oai-gnb-fhi72</images>
-  </testCase>
-
-  <testCase>
-    <class>Initialize_UE</class>
-    <desc>Initialize Amarisoft UE</desc>
-    <id>amarisoft_00105_40MHz</id>
-  </testCase>
-
-  <testCase>
-    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
-    <node>cacofonix</node>
-  </testCase>
-
-  <testCase>
-    <class>Deploy_Object</class>
-    <desc>Deploy gNB (TDD/Band78/100MHz/Benetel) in a container</desc>
-    <node>cacofonix</node>
-    <yaml_path>ci-scripts/yaml_files/sa_fhi_7.2_benetel550_4x4_40MHz_9b_mplane_gnb</yaml_path>
-  </testCase>
-
-  <testCase>
-    <class>Attach_UE</class>
-    <desc>Attach UE</desc>
-    <id>amarisoft_ue_1</id>
-  </testCase>
-
-  <testCase>
-    <class>Ping</class>
-    <desc>Ping: 100 pings in 10 sec</desc>
-    <id>amarisoft_ue_1</id>
-    <svr_id>oc-cn5g-00105</svr_id>
-    <ping_args>-c 100 -i 0.1</ping_args>
-    <ping_packetloss_threshold>1</ping_packetloss_threshold>
-    <ping_rttavg_threshold>15</ping_rttavg_threshold>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (DL/130Mbps/UDP)(30 sec)</desc>
-    <iperf_args>-u -b 130M -t 30 -R</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>80</iperf_bitrate_threshold>
-    <iperf_profile>balanced</iperf_profile>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (UL/15Mbps/UDP)(30 sec)</desc>
-    <iperf_args>-u -b 15M -t 30</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>80</iperf_bitrate_threshold>
-    <iperf_profile>balanced</iperf_profile>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (DL/TCP)(30 sec)</desc>
-    <iperf_args>-t 30 -R</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_tcp_rate_target>40</iperf_tcp_rate_target>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Iperf</class>
-    <desc>iperf (UL/TCP)(30 sec)</desc>
-    <iperf_args>-t 30</iperf_args>
-    <id>amarisoft_ue_1</id>
-    <iperf_tcp_rate_target>10</iperf_tcp_rate_target>
-    <svr_id>oc-cn5g-00105</svr_id>
-  </testCase>
-
-  <testCase>
-    <class>Detach_UE</class>
-    <always_exec>true</always_exec>
-    <desc>Detach UE</desc>
-    <id>amarisoft_ue_1</id>
-  </testCase>
-
-  <testCase>
-    <class>Terminate_UE</class>
-    <always_exec>true</always_exec>
-    <desc>Terminate UE</desc>
-    <id>amarisoft_00105_40MHz</id>
-  </testCase>
-
-  <testCase>
-    <class>IdleSleep</class>
-    <desc>Sleep</desc>
-    <idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
-  </testCase>
-
-  <testCase>
-    <class>Undeploy_Object</class>
-    <always_exec>true</always_exec>
-    <desc>Undeploy gNB</desc>
-    <node>cacofonix</node>
-    <yaml_path>ci-scripts/yaml_files/sa_fhi_7.2_benetel550_4x4_40MHz_9b_mplane_gnb</yaml_path>
-    <analysis>
-      <services>oai-gnb=EndsWithBye</services>
-    </analysis>
-  </testCase>
-
-  <testCase>
-    <class>Clean_Test_Server_Images</class>
-    <always_exec>true</always_exec>
-    <desc>Clean Test Images on Test Server</desc>
-    <node>cacofonix</node>
-    <images>oai-gnb-fhi72</images>
-  </testCase>
-
-  <testCase>
-    <class>UndeployCoreNetwork</class>
-    <desc>Terminate 5G Core</desc>
-    <always_exec>true</always_exec>
-    <cn_id>oc-cn5g-00105</cn_id>
-  </testCase>
-
-</testCaseList>
--- a/ci-scripts/xml_files/container_sa_fhi72_vvdn_up2.xml
+++ b/ci-scripts/xml_files/container_sa_fhi72_vvdn_up2.xml
@@ -12,13 +12,6 @@
    <script>yaml_files/sa_fhi_7.2_vvdn_gnb/setup_config.sh</script>
  </testCase>

-  <testCase>
-    <class>Custom_Script</class>
-    <desc>Activate carriers on VVDN RU</desc>
-    <node>cacofonix</node>
-    <script>scripts/vvdn-activate-carriers.sh</script>
-  </testCase>
-
  <testCase>
    <class>Pull_Local_Registry</class>
    <desc>Pull Images from Local Registry</desc>
@@ -28,7 +21,7 @@

  <testCase>
    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
+    <desc>Create new Workspace for server 0</desc>
    <node>cacofonix</node>
  </testCase>

@@ -141,9 +134,9 @@
  <testCase>
    <class>Custom_Script</class>
    <always_exec>true</always_exec>
-    <desc>Inactivate carriers on VVDN RU</desc>
+    <desc>Set CPU to idle state, set kernel parameters to default values</desc>
    <node>cacofonix</node>
-    <script>scripts/vvdn-inactivate-carriers.sh</script>
+    <script>yaml_files/sa_fhi_7.2_vvdn_gnb/setup_cleanup.sh</script>
  </testCase>

 </testCaseList>
--- a/ci-scripts/xml_files/container_sa_n310_2X2_100MHz_quectel.xml
+++ b/ci-scripts/xml_files/container_sa_n310_2X2_100MHz_quectel.xml
@@ -104,7 +104,7 @@
    <node>matix</node>
    <yaml_path>ci-scripts/yaml_files/5g_sa_n310_2x2_100MHz</yaml_path>
    <analysis>
-      <services>oai-gnb=EndsWithBye</services>
+      <services>oai-gnb=RetxCheck=dl=10,100,100,100;ul=25,100,100,100 oai-gnb=EndsWithBye</services>
    </analysis>
  </testCase>

--- a/ci-scripts/xml_files/container_sa_n310_2X2_60MHz_quectel.xml
+++ b/ci-scripts/xml_files/container_sa_n310_2X2_60MHz_quectel.xml
@@ -104,7 +104,7 @@
    <node>matix</node>
    <yaml_path>ci-scripts/yaml_files/5g_sa_n310_2x2_60MHz</yaml_path>
    <analysis>
-      <services>oai-gnb=EndsWithBye</services>
+      <services>oai-gnb=RetxCheck=dl=15,100,100,100;ul=20,100,100,100 oai-gnb=EndsWithBye</services>
    </analysis>
  </testCase>

--- a/ci-scripts/xml_files/container_sa_n310_4X4_60MHz_quectel.xml
+++ b/ci-scripts/xml_files/container_sa_n310_4X4_60MHz_quectel.xml
@@ -104,7 +104,7 @@
    <node>matix</node>
    <yaml_path>ci-scripts/yaml_files/5g_sa_n310_4x4_60MHz</yaml_path>
    <analysis>
-      <services>oai-vnf=EndsWithBye oai-pnf=EndsWithBye</services>
+      <services>oai-vnf=RetxCheck=10,100,100,100 oai-vnf=EndsWithBye oai-pnf=EndsWithBye</services>
    </analysis>
  </testCase>

--- a/ci-scripts/xml_files/cppcheck.xml
+++ b/ci-scripts/xml_files/cppcheck.xml
@@ -0,0 +1,20 @@
+<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
+
+<testCaseList>
+  <htmlTabRef>build-tab</htmlTabRef>
+  <htmlTabName>CPPCHECK Analysis</htmlTabName>
+  <htmlTabIcon>wrench</htmlTabIcon>
+
+  <testCase>
+    <class>Create_Workspace</class>
+    <desc>Create new Workspace</desc>
+    <node>carabe</node>
+  </testCase>
+
+  <testCase>
+    <class>Cppcheck_Analysis</class>
+    <desc>Static Code Analysis with cppcheck</desc>
+    <node>carabe</node>
+  </testCase>
+
+</testCaseList>
--- a/ci-scripts/yaml_files/4g_l2sim_fdd/docker-compose.yml
+++ b/ci-scripts/yaml_files/4g_l2sim_fdd/docker-compose.yml
@@ -166,7 +166,7 @@ services:
            retries: 5

    trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        privileged: true
        container_name: l2sim4g-trf-gen
        networks:
--- a/ci-scripts/yaml_files/4g_rfsimulator_fdd_05MHz/docker-compose.yml
+++ b/ci-scripts/yaml_files/4g_rfsimulator_fdd_05MHz/docker-compose.yml
@@ -166,7 +166,7 @@ services:
            retries: 5

    trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        privileged: true
        container_name: rfsim4g-trf-gen
        networks:
--- a/ci-scripts/yaml_files/4g_rfsimulator_fdd_10MHz/docker-compose.yml
+++ b/ci-scripts/yaml_files/4g_rfsimulator_fdd_10MHz/docker-compose.yml
@@ -166,7 +166,7 @@ services:
            retries: 5

    trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        privileged: true
        container_name: rfsim4g-trf-gen
        networks:
--- a/ci-scripts/yaml_files/4g_rfsimulator_fdd_20MHz/docker-compose.yml
+++ b/ci-scripts/yaml_files/4g_rfsimulator_fdd_20MHz/docker-compose.yml
@@ -166,7 +166,7 @@ services:
            retries: 5

    trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        privileged: true
        container_name: rfsim4g-trf-gen
        networks:
--- a/ci-scripts/yaml_files/4g_rfsimulator_tdd_05MHz/docker-compose.yml
+++ b/ci-scripts/yaml_files/4g_rfsimulator_tdd_05MHz/docker-compose.yml
@@ -166,7 +166,7 @@ services:
            retries: 5

    trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        privileged: true
        container_name: rfsim4g-trf-gen
        networks:
--- a/ci-scripts/yaml_files/5g_f1_rfsimulator/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_f1_rfsimulator/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
@@ -75,7 +75,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        init: true
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
--- a/ci-scripts/yaml_files/5g_fdd_rfsimulator/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_fdd_rfsimulator/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        init: true
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
--- a/ci-scripts/yaml_files/5g_rfsimulator/README.md
+++ b/ci-scripts/yaml_files/5g_rfsimulator/README.md
@@ -38,11 +38,11 @@ Password:
 Now pull images.

 ```bash
-$ docker pull mysql:9.6
-$ docker pull oaisoftwarealliance/oai-amf:v2.2.1
-$ docker pull oaisoftwarealliance/oai-smf:v2.2.1
-$ docker pull oaisoftwarealliance/oai-upf:v2.2.1
-$ docker pull oaisoftwarealliance/trf-gen-cn5g:latest
+$ docker pull mysql:8.0
+$ docker pull oaisoftwarealliance/oai-amf:v2.1.10
+$ docker pull oaisoftwarealliance/oai-smf:v2.1.10
+$ docker pull oaisoftwarealliance/oai-upf:v2.1.10
+$ docker pull oaisoftwarealliance/trf-gen-cn5g:focal

 $ docker pull oaisoftwarealliance/oai-gnb:develop
 $ docker pull oaisoftwarealliance/oai-nr-ue:develop
@@ -570,7 +570,7 @@ runs the gnb service with modified gNB executable.
 ```bash
 docker compose -f docker-compose.yaml -f local-override.yaml up -d oai-gnb
 ```
-This command rebuilds both the gNB & nrUE and runs the oai-nr-ue container with
+This command rebuilds both the gNB & nrUE and runs the oai-nr-ue container with 
 modified nrUE executable.
 ```bash
 docker compose -f docker-compose.yaml -f local-override.yaml up -d oai-nr-ue
--- a/ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ./oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        init: true
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
--- a/ci-scripts/yaml_files/5g_rfsimulator/mini_nonrf_config.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator/mini_nonrf_config.yaml
@@ -43,12 +43,6 @@ nfs:
    n4:
      interface_name: eth0
      port: 8805
-  pcf:
-    host: oai-pcf
-    sbi:
-      port: 8080
-      api_version: v1
-      interface_name: eth0

  upf:
    host: oai-upf
@@ -83,10 +77,6 @@ database:
 snssais:
  - &embb_slice1
    sst: 1
-    sd: "FFFFFF"
-  - &embb_slice2
-    sst: 1
-    sd: "123456"

 ############## NF-specific configuration
 amf:
@@ -113,7 +103,6 @@ amf:
      tac: 0x0001
      nssai:
        - *embb_slice1
-        - *embb_slice2
  supported_integrity_algorithms:
    - "NIA0"
    - "NIA1"
@@ -127,7 +116,7 @@ smf:
  ue_mtu: 1500
  support_features:
    use_local_subscription_info: yes # Use infos from local_subscription_info or from UDM
-    use_local_pcc_rules: no # Enforce PCC rules from PCF
+    use_local_pcc_rules: yes # Use infos from local_pcc_rules or from PCF
  upfs:
    - host: oai-upf
      port: 8805
@@ -155,9 +144,6 @@ smf:
      - sNssai: *embb_slice1
        dnnSmfInfoList:
          - dnn: "oai"
-      - sNssai: *embb_slice2
-        dnnSmfInfoList:
-          - dnn: "openairinterface"
  local_subscription_infos:
    - single_nssai: *embb_slice1
      dnn: "oai"
@@ -165,19 +151,6 @@ smf:
        5qi: 9
        session_ambr_ul: "200Mbps"
        session_ambr_dl: "400Mbps"
-    - single_nssai: *embb_slice2
-      dnn: "openairinterface"
-      qos_profile:
-        5qi: 9
-        session_ambr_ul: "200Mbps"
-        session_ambr_dl: "400Mbps"
-
-pcf:
-  local_policy:
-    policy_decisions_path: /openair-pcf/policies/policy_decisions
-    pcc_rules_path: /openair-pcf/policies/pcc_rules
-    traffic_rules_path: /openair-pcf/policies/traffic_rules
-    qos_data_path: /openair-pcf/policies/qos_data

 upf:
  support_features:
@@ -189,15 +162,9 @@ upf:
      - sNssai: *embb_slice1
        dnnUpfInfoList:
          - dnn: "oai"
-      - sNssai: *embb_slice2
-        dnnUpfInfoList:
-          - dnn: "openairinterface"

 ## DNN configuration
 dnns:
  - dnn: "oai"
    pdu_session_type: "IPV4"
    ipv4_subnet: "12.1.1.0/24"
-  - dnn: "openairinterface"
-    pdu_session_type: "IPV4"
-    ipv4_subnet: "12.1.2.0/24"
--- a/ci-scripts/yaml_files/5g_rfsimulator_24prb/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator_24prb/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        init: true
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
--- a/ci-scripts/yaml_files/5g_rfsimulator_2x2/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator_2x2/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        init: true
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
--- a/ci-scripts/yaml_files/5g_rfsimulator_e1/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator_e1/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
--- a/ci-scripts/yaml_files/5g_rfsimulator_fr2_66prb/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator_fr2_66prb/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        init: true
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
--- a/ci-scripts/yaml_files/5g_rfsimulator_multiue/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator_multiue/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
            - ../5g_rfsimulator/mysql-healthcheck.sh:/tmp/mysql-healthcheck.sh
@@ -23,7 +23,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -35,7 +35,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -47,7 +47,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -70,7 +70,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
              "ip route add 12.1.1.0/24 via 192.168.72.134 dev eth0; sleep infinity"
--- a/ci-scripts/yaml_files/5g_rfsimulator_n2_ho/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator_n2_ho/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
            - ../5g_rfsimulator/mysql-healthcheck.sh:/tmp/mysql-healthcheck.sh
@@ -23,7 +23,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:ci-tmp-pr-372-26c14bcd
        environment:
            - TZ=Europe/paris
        volumes:
@@ -35,7 +35,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.9
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -47,7 +47,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.9
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -70,7 +70,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
              "ip route add 12.1.1.0/24 via 192.168.72.134 dev eth0; sleep infinity"
--- a/ci-scripts/yaml_files/5g_rfsimulator_ntn_geo/docker-compose.yaml
+++ b/ci-scripts/yaml_files/5g_rfsimulator_ntn_geo/docker-compose.yaml
@@ -3,7 +3,7 @@
 services:
    mysql:
        container_name: "rfsim5g-mysql"
-        image: mysql:9.6
+        image: mysql:8.0
        init: true
        volumes:
            - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                ipv4_address: 192.168.71.131
    oai-amf:
        container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.2.1
+        image: oaisoftwarealliance/oai-amf:v2.1.10
        environment:
            - TZ=Europe/paris
        volumes:
@@ -38,7 +38,7 @@ services:
                ipv4_address: 192.168.71.132
    oai-smf:
        container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.2.1
+        image: oaisoftwarealliance/oai-smf:v2.1.10
        environment:
            - TZ=Europe/Paris
        volumes:
@@ -50,7 +50,7 @@ services:
                ipv4_address: 192.168.71.133
    oai-upf:
        container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.2.1
+        image: oaisoftwarealliance/oai-upf:v2.1.10
        init: true
        environment:
            - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
    oai-ext-dn:
        privileged: true
        container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:latest
+        image: oaisoftwarealliance/trf-gen-cn5g:focal
        init: true
        entrypoint: /bin/bash -c \
              "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Sakthivel Velumani	8837de52a3	phy: allow only same number of log ports as bb ports	2026-04-16 02:16:22 +00:00
Sakthivel Velumani	7efe1aaf5e	phy: rxdataF in grid Do local receive beamforming. A list is used to store grid information till the rx slot is received. While in case of RU beamforming the grid info is sent to RU and no need to store the information locally. New buffer rxdataF_BF is created to hold beamformed signal and used in all L1 functions. Make rxdataF input to L1 procedures.	2026-04-16 02:16:18 +00:00
Sakthivel Velumani	1138134f71	phy: use flat buffer in rxdataF Same as txdataF, now rxdataF buffer is flat with first RB starting at index 0.	2026-04-16 02:16:18 +00:00
Sakthivel Velumani	2257cad674	phy: add inverse fft shift function	2026-04-16 02:16:18 +00:00
francescomani	b2c99ab01c	do not send beam information to USRP if the beam is the same as before this keeps the same logic as before, the understanding is that executing the GPIO command requires time or at least have an impact on the timing, so it is better not to execute it if not necessary	2026-04-16 02:16:18 +00:00
francescomani	09bbabd748	function to set GPIO beam for USRP using new API	2026-04-16 02:16:18 +00:00
Sakthivel Velumani	6db1b2de91	ru: pass beam ID to RU New functions to write beam ID to xran and to split 8 device. Co-authored-by: francescomani <email@francescomani.it>	2026-04-16 02:16:15 +00:00
Sakthivel Velumani	343c54eff1	phy: grid info api Use a structure to hold grid resource allocation and beam id. In UL slots the allocation info is formed after L2 returns FAPI PDUs and beam id is passed on to RU. In DL slots the allocation info and beam id are passed to RU when samples are sent. Fill dig_bf_interface_list only in beamforming mode Do Tx beamforming.	2026-04-16 02:16:15 +00:00
Sakthivel Velumani	af78f814e9	clean-up: nr_feptx0 Provide in and out buffer to this function rather than taking from RU struct.	2026-04-16 02:16:15 +00:00
Bartosz Podrygajlo	2b1e431e14	rfsim: Rewrite beamforming implementation Rewrite rfsim beamforming simulation: Now the number of beams is equal to number of antenna elements. Each IQ stream should have a single beam assigned. This new requirement complicates the transport format a bit but the implementation doesn't change that much.	2026-04-16 02:16:15 +00:00
Sakthivel Velumani	b5b93bdb55	phy: remove DAS config option With the spatial stream indexing implementation there is no need to handle stream mapping specially for DAS scenario. Updated reference config file and documentation.	2026-04-16 02:16:11 +00:00
Sakthivel Velumani	f35cb06da5	ru: remove num_beams_period this parameters was used to set the total number of tx and rx streams in the RU. with this commit, the parameter is removed and the total number of streams reflect the number of antenna ports specified in the RU section of config file.	2026-04-15 01:56:44 +00:00
Sakthivel Velumani	199a436441	simd: handle unaligned input On ARM platforms stack memory is 16 byte aligned and 32 byte alignment is not guaranteed. So mult_cpx_vector is modified to work around this.	2026-04-15 01:56:41 +00:00
Sakthivel Velumani	32b404fa81	simd: add function to multadd cpx vec cpx scalar	2026-04-14 16:26:18 +00:00
Sakthivel Velumani	3d79f90c38	simd: change mult and multadd to use avx2 All modern x86 CPUs have AVX2 so no point in sticking to SSE. SIMDe will fallback to 128bit vector operation for ARM targets.	2026-04-14 16:26:18 +00:00
Sakthivel Velumani	e76ebc8e56	ru: remove num_beams_period from RU section	2026-04-13 20:42:12 +00:00
Sakthivel Velumani	de3d364425	doc: update beamforming documentation	2026-04-13 20:42:12 +00:00
Sakthivel Velumani	301ceaf492	phy: remove beam idx from rxdataF txdataF 1. Beam index: So far rxdataF and txdataF had beam number as first index to separate freq domain samples of antenna ports when mulitple beams are served in a slot. This works fine when the beam is applied to entire symbol / slot but not suitable for digital beamforming. This commit removes the beam number index from the data buffers and the buffers hold all the antenna ports in the first dimension. The antenna port index to be used for each UE in a MU-MIMO or concurrent analog beam scenario is signalled by L2 via dedicated fields in the FAPI PDU. 2. Beam ID array changes: - The gNB and RU struct has a 2D array to hold beam IDs for all symbols in a frame and all antenna ports. The order is now changes to first: symbol index and second: antenna port because the RU access all ports' beam IDs for each symbol / slot at a time. This ordering is optimal for maximizing cache hits. - The type is now changed from int to uint16_t. So far the L1 had to deduce the beam number index (done in beam_index_allocation()) from the beam ID sent by L2 and this is done by initializing the beam_id array to -1 which denoted no beam id set. Now since L2 explicitely passes the port indices, there is no need for denoting if a beam id is assigned or not to a slot in L1. And uint16_t matches with the type used by FAPI to carry beam ID. Since the type is uin16_t, beam_id array is initialized to 0 and the check for -1 when passing beam ID 0 to xran is also removed. 3. Number of antenna ports: The removal of beam index from rxdataF and txdataF buffers resulted in all antenna ports to be in a single vector. The number of logical ports passed to L1 is not N1N2XP*number of beams per period. The buffer initialization function is updated to reflect this change. DAS reference config file is updated in accordance with these changes. 4. oaioran.c: Remove the check of beam ID = -1 for setting nPrbElm = 0. This is a hack for LiteON to supposedely improve performance according to Mario. If it's true then a proper fix would be to pass allocation information from L1 and use it instead of beam ID.	2026-04-13 20:42:12 +00:00
Sakthivel Velumani	5d6b915a57	mac: pass antenna port mapping for MU-MIMO to PHY 1. Added new config parameter to read RU port indices to be used via config file. 2. When scheduling multiple UE on different beams in a slot, the antenna ports used for each UE is explicitely passed down via fapi. 3. Fix dig_bf_interface_list by filling beam id for all logical ports used.	2026-04-13 20:42:12 +00:00
Sakthivel Velumani	a81333ebde	fapi: add spatial steam mapping for MU-MIMO Update copy functions and ctest.	2026-04-13 20:42:12 +00:00
Sakthivel Velumani	20420cd818	fapi: better message copy functions Copying large struct one element at a time generates much more assembly code than memcpy and the code becomes less maintainable. This commit copies parts of structs using memcpy.	2026-04-13 20:42:08 +00:00