Floating point twiddle factors

Use floating point twiddle for first 8 butterflies in 16 point DFT.
Later stages like 256 point DFT use floating point twiddle only in first
4 butterflies. Doing so reduces EVM in first 4 frequency bins by 6 times
for 1024 DFT.

CMakeLists.txt

@@ -108,7 +108,6 @@ add_list_string_option(CMAKE_BUILD_TYPE "RelWithDebInfo" "Choose the type of bui
 # -so to avoid AVX512 instructions generation by gcc
 if(EXISTS "/proc/cpuinfo" AND NOT CROSS_COMPILE)
   file(STRINGS "/proc/cpuinfo" CPUFLAGS REGEX flags LIMIT_COUNT 1)
-  file(STRINGS "/proc/cpuinfo" CPUPART REGEX "CPU part" LIMIT_COUNT 1)
 else()
   message(WARNING "did not find /proc/cpuinfo -- not setting any x86-specific compilation variables")
 endif()
@@ -147,20 +146,9 @@ elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
     set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSSE3_NATIVE")
   endif()
 elseif (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
-    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
+  set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
 elseif (CMAKE_SYSTEM_PROCESSOR STREQUAL "aarch64")
-# Neoverse CPU part codes available at https://github.com/util-linux/util-linux/blob/master/sys-utils/lscpu-arm.c
-  if (CPUPART MATCHES "0xd40") # Neoverse-V1
-    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-v1 -lgcc -lrt")
-  elseif (CPUPART MATCHES "0xd4f") # Neoverse-V2
-    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-v2 -ftree-vectorize -lgcc -lrt")
-  elseif (CPUPART MATCHES "0xd0c") # Neoverse-N1
-    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-n1  -lgcc -lrt")
-  elseif (CPUPART MATCHES "0xd49") # Neoverse-N2
-    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-n2 -ftree-vectorize -lgcc -lrt")
-  else ()
-    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=native -lgcc -lrt")
-  endif()
+  set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -lgcc -lrt")
 else()
   message(FATAL_ERROR "compile for CPU architecture ${CPUARCH}, CMAKE_SYSTEM_PROCESSOR ${CMAKE_SYSTEM_PROCESSOR}")
 endif()
@@ -272,6 +260,7 @@ endif()
 
 # Debug related options
 #########################################
+add_boolean_option(DEBUG_ASN1 False "Enable ASN1 debug logs" OFF)
 # asn1c skeletons have hardcoded this flag to make customized debug logs
 # OAI uses this feature to re-use OAI LOG_I(ASN1, ...)
 # see common/utils/config.h
@@ -310,7 +299,6 @@ message(STATUS "Selected KPM Version: ${KPM_VERSION}")
 
 
 add_boolean_option(ENABLE_IMSCOPE OFF "Enable phy scope based on imgui" OFF)
-add_boolean_option(ENABLE_IMSCOPE_RECORD OFF "Enable recording IQ data for imscope" OFF)
 
 ##################################################
 # ASN.1 grammar C code generation & dependencies #
@@ -358,7 +346,6 @@ set(NGAP_DIR ${OPENAIR3_DIR}/NGAP)
 include_directories ("${NGAP_DIR}")
 add_library(ngap
   ${NGAP_DIR}/ngap_gNB.c
-  ${NGAP_DIR}/ngap_common.c
   ${NGAP_DIR}/ngap_gNB_context_management_procedures.c
   ${NGAP_DIR}/ngap_gNB_decoder.c
   ${NGAP_DIR}/ngap_gNB_encoder.c
@@ -462,12 +449,9 @@ add_library(f1ap
             ${F1AP_DIR}/f1ap_handlers.c
             ${F1AP_DIR}/f1ap_itti_messaging.c)
 target_include_directories(f1ap PUBLIC F1AP_DIR)
-target_link_libraries(f1ap PUBLIC asn1_f1ap GTPV1U)
+target_link_libraries(f1ap PUBLIC asn1_f1ap L2_NR)
 target_link_libraries(f1ap PRIVATE ngap nr_rrc HASHTABLE f1ap_lib)
 target_include_directories(f1ap PRIVATE ${F1AP_DIR}/lib)
-if(E2_AGENT)
-  target_compile_definitions(f1ap PRIVATE E2_AGENT)
-endif()
 
 # LPP
 ##############
@@ -510,6 +494,7 @@ include_directories ("${OPENAIR_DIR}/radio/COMMON")
 add_boolean_option(UE_EXPANSION             False         "enable UE_EXPANSION with max 256 UE" ON)
 add_boolean_option(PHY_TX_THREAD            False         "enable UE_EXPANSION with max 256 UE" ON)
 add_boolean_option(PRE_SCD_THREAD           False         "enable UE_EXPANSION with max 256 UE" ON)
+add_boolean_option(UESIM_EXPANSION          False         "enable UESIM_EXPANSION with max 256 UE" ON)
 
 ##########################
 # SCHEDULING/REAL-TIME/PERF options
@@ -521,15 +506,20 @@ add_boolean_option(ENABLE_VCD_FIFO         False  "time measurements of proc cal
 ##########################
 # PHY options
 ##########################
-add_integer_option(MAX_NUM_CCs             1     "Carrier component data arrays size (oai doesn't support carrier aggreagtion for now)" ON)
+add_boolean_option(LOCALIZATION            False "???" ON)
+add_integer_option(MAX_NUM_CCs             1     "????" ON)
 add_boolean_option(SMBV                    False "Rohde&Schwarz SMBV100A vector signal generator" ON)
 add_boolean_option(DEBUG_PHY               False "Enable PHY layer debugging options" ON)
 add_boolean_option(DEBUG_PHY_PROC          False "Enable debugging of PHY layer procedures" ON)
+add_boolean_option(MEX                     False "Enabling compilation with mex" ON)
 
 ##########################
 # NAS LAYER OPTIONS
 ##########################
+add_boolean_option(ENABLE_NAS_UE_LOGGING   True  "????" ON)
 add_boolean_option(NAS_BUILT_IN_UE         True  "UE NAS layer present in this executable" ON)
+add_boolean_option(NAS_UE                  True  "NAS UE INSTANCE (<> NAS_MME)" ON)
+
 
 ##########################
 # RRC LAYER OPTIONS
@@ -697,6 +687,7 @@ set(SCHED_SRC_NR_UE
   ${OPENAIR1_DIR}/SCHED_NR_UE/phy_procedures_nr_ue.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/phy_procedures_nr_ue_sl.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/fapi_nr_ue_l1.c
+  ${OPENAIR1_DIR}/SCHED_NR_UE/phy_frame_config_nr_ue.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/harq_nr.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/pucch_uci_ue_nr.c
 )
@@ -725,7 +716,6 @@ set(NFAPI_PNF_SRC
 )
 add_library(NFAPI_PNF_LIB ${NFAPI_PNF_SRC})
 target_link_libraries(NFAPI_PNF_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
-target_link_libraries(NFAPI_PNF_LIB PUBLIC nr_fapi_p7)
 
 include_directories(${NFAPI_DIR}/pnf/public_inc)
 include_directories(${NFAPI_DIR}/pnf/inc)
@@ -756,9 +746,6 @@ set(NFAPI_USER_SRC
 add_library(NFAPI_USER_LIB ${NFAPI_USER_SRC})
 target_link_libraries(NFAPI_USER_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs UTIL)
 target_link_libraries(NFAPI_USER_LIB PRIVATE nr_fapi_p7)
-if(OAI_AERIAL)
-  target_compile_definitions(NFAPI_USER_LIB PRIVATE ENABLE_AERIAL)
-endif()
 include_directories(${NFAPI_USER_DIR})
 
 # Layer 1
@@ -791,11 +778,12 @@ set(PHY_NRLDPC_CODINGIF
 
 add_library(dfts MODULE ${OPENAIR1_DIR}/PHY/TOOLS/oai_dfts.c ${OPENAIR1_DIR}/PHY/TOOLS/oai_dfts_neon.c)
 
-add_library(crc_byte OBJECT ${OPENAIR1_DIR}/PHY/CODING/crc_byte.c)
-
 set(PHY_SRC_COMMON
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools_common.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
+#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slss.c
+#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/sldch.c
+#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/slsch.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/group_hopping.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/phich_common.c
@@ -818,20 +806,24 @@ set(PHY_SRC_COMMON
   ${OPENAIR1_DIR}/PHY/CODING/ccoding_byte.c
   ${OPENAIR1_DIR}/PHY/CODING/ccoding_byte_lte.c
   ${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
+  ${OPENAIR1_DIR}/PHY/CODING/crc_byte.c
   ${PHY_TURBOIF}
   ${OPENAIR1_DIR}/PHY/CODING/lte_rate_matching.c
   ${OPENAIR1_DIR}/PHY/CODING/viterbi.c
   ${OPENAIR1_DIR}/PHY/CODING/viterbi_lte.c
   ${OPENAIR1_DIR}/PHY/INIT/init_top.c
   ${OPENAIR1_DIR}/PHY/INIT/lte_parms.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dfts_load.c
   ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
   ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
   ${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/get_sin_cos.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/oai_arith_operations.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/lut.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
   )
 
 set(PHY_SRC
@@ -850,9 +842,13 @@ set(PHY_SRC
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pcfich.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pucch.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch.c
+#  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_decoding.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/rar_tools.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/uci_tools.c
+#  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
+#  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
+#  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
   ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_eNB_measurements.c
   ${OPENAIR1_DIR}/PHY/INIT/lte_init.c
   )
@@ -901,7 +897,6 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/ulsch_coding.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/rar_tools_ue.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/initial_sync.c
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_mbsfn.c
   ${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz_ue.c
@@ -923,6 +918,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach_common.c
   ${OPENAIR1_DIR}/PHY/nr_phy_common/src/nr_phy_common_csirs.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_scrambling.c
+  ${OPENAIR1_DIR}/PHY/NR_REFSIG/scrambling_luts.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/refsig.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/srs_modulation_nr.c
   )
@@ -951,16 +947,21 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gen_mod_table.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/dmrs_nr.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/ptrs_nr.c
+  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_csi_rs.c
   ${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
   ${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_freq_equalization.c
   ${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_measurements_gNB.c
   ${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
   ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
   ${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/oai_arith_operations.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/lut.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
   ${PHY_POLARSRC}
   ${PHY_SMALLBLOCKSRC}
   ${PHY_NRLDPC_CODINGIF}
@@ -1004,12 +1005,16 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_ue_measurements.c
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_adjust_gain.c
   ${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
   ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
   ${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/oai_arith_operations.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/lut.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
   ${OPENAIR1_DIR}/PHY/INIT/nr_init_ue.c
   ${PHY_POLARSRC}
   ${PHY_SMALLBLOCKSRC}
@@ -1021,12 +1026,12 @@ if (${SMBV})
   set(PHY_SRC "${PHY_SRC} ${OPENAIR1_DIR}/PHY/TOOLS/smbv.c")
 endif  (${SMBV})
 
+set(PHY_SRC_UE ${PHY_SRC_UE} ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c)
+
 add_library(PHY_COMMON ${PHY_SRC_COMMON})
-target_link_libraries(PHY_COMMON
-  PRIVATE shlib_loader asn1_lte_rrc_hdrs crc_byte
-  PUBLIC UTIL
-)
+target_link_libraries(PHY_COMMON PRIVATE shlib_loader)
 add_dependencies(PHY_COMMON dfts)
+target_link_libraries(PHY_COMMON PRIVATE asn1_lte_rrc_hdrs PUBLIC UTIL)
 
 add_library(PHY ${PHY_SRC})
 target_link_libraries(PHY PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
@@ -1058,6 +1063,28 @@ target_link_libraries(PHY_NR_UE PRIVATE asn1_nr_rrc_hdrs nr_phy_common nr_common
 add_library(PHY_RU ${PHY_SRC_RU})
 target_link_libraries(PHY_RU PRIVATE asn1_lte_rrc_hdrs UTIL)
 
+#Library for mex functions
+#########################3
+set(PHY_MEX_UE
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
+  )
+add_library(PHY_MEX ${PHY_MEX_UE})
+target_link_libraries(PHY_MEX PRIVATE asn1_lte_rrc_hdrs UTIL)
+
 #Layer 2 library
 #####################
 set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
@@ -1112,6 +1139,7 @@ set(L2_SRC
   ${PDCP_DIR}/pdcp_util.c
   ${PDCP_DIR}/pdcp_security.c
   ${OPENAIR2_DIR}/LAYER2/openair2_proc.c
+#  ${RRC_DIR}/rrc_UE.c
   ${RRC_DIR}/rrc_eNB.c
   ${RRC_DIR}/rrc_eNB_endc.c
   ${RRC_DIR}/rrc_eNB_S1AP.c
@@ -1126,6 +1154,7 @@ set(L2_SRC
 
 set(L2_RRC_SRC
   ${OPENAIR2_DIR}/LAYER2/openair2_proc.c
+  #  ${RRC_DIR}/rrc_UE.c
   ${RRC_DIR}/rrc_eNB.c
   ${RRC_DIR}/rrc_eNB_endc.c
   ${RRC_DIR}/rrc_eNB_S1AP.c
@@ -1149,6 +1178,8 @@ set(L2_NR_SRC
   ${NR_RRC_DIR}/mac_rrc_dl_f1ap.c
   ${NR_RRC_DIR}/nr_rrc_config.c
   ${NR_RRC_DIR}/rrc_gNB_nsa.c
+  ${NR_RRC_DIR}/rrc_gNB_internode.c
+  ${NR_RRC_DIR}/rrc_gNB_reconfig.c
   ${NR_RRC_DIR}/rrc_gNB_UE_context.c
   ${NR_RRC_DIR}/rrc_gNB_NGAP.c
   ${NR_RRC_DIR}/rrc_gNB_radio_bearers.c
@@ -1182,6 +1213,7 @@ set(NR_L2_SRC_UE
   ${NR_SDAP_SRC}
   ${NR_UE_RRC_DIR}/L2_interface_ue.c
   ${NR_UE_RRC_DIR}/main_ue.c
+  ${NR_RRC_DIR}/nr_rrc_config.c
   ${NR_UE_RRC_DIR}/rrc_UE.c
   ${NR_UE_RRC_DIR}/rrc_nsa.c
   ${NR_UE_RRC_DIR}/rrc_timers_and_constants.c
@@ -1249,7 +1281,7 @@ set (MAC_NR_SRC_UE
   ${NR_UE_PHY_INTERFACE_DIR}/NR_Packet_Drop.c
   ${NR_UE_MAC_DIR}/config_ue.c
   ${NR_UE_MAC_DIR}/config_ue_sl.c
-  ${NR_UE_MAC_DIR}/mac_tables.c
+  ${NR_UE_MAC_DIR}/mac_vars.c
   ${NR_UE_MAC_DIR}/main_ue_nr.c
   ${NR_UE_MAC_DIR}/nr_ue_procedures.c
   ${NR_UE_MAC_DIR}/nr_ue_procedures_sl.c
@@ -1335,9 +1367,10 @@ if(E2_AGENT)
 endif()
 
 add_library(L2_LTE_NR
-  # temporary solution until 4G/5G code completely untangled (as evidenced by deletion of the following file)
-  ${MAC_DIR}/dummy_functions.c
+  ${L2_RRC_SRC}
+  ${MAC_SRC}
   ${ENB_APP_SRC}
+  ${MCE_APP_SRC}
 )
 
 target_link_libraries(L2_LTE_NR PRIVATE f1ap s1ap nr_rrc)
@@ -1349,16 +1382,20 @@ add_library(L2_UE
 target_link_libraries(L2_UE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 target_link_libraries(L2_UE PRIVATE GTPV1U)
 
+add_library(L2_UE_LTE_NR
+  ${L2_RRC_SRC_UE}
+  ${MAC_SRC_UE}
+)
+target_link_libraries(L2_UE_LTE_NR PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
+
 target_link_libraries(L2_UE PRIVATE asn1_lte_rrc_hdrs)
 
 add_library( NR_L2_UE ${NR_L2_SRC_UE} ${MAC_NR_SRC_UE} )
-target_link_libraries(NR_L2_UE PRIVATE nr_rlc)
+target_link_libraries(NR_L2_UE PRIVATE f1ap nr_rlc)
 target_link_libraries(NR_L2_UE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs nr_common nr_ue_power_procedures nr_ue_ra_procedures)
-target_link_libraries(NR_L2_UE PRIVATE nr_nas)
 
 add_library(MAC_NR_COMMON
             ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common.c
-            ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common_tdd.c
             ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_compute_tbs_common.c
 )
 target_link_libraries(MAC_NR_COMMON PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -1375,6 +1412,7 @@ include_directories("${OPENAIR1_DIR}/SCHED_NR_UE")
 ##########################
 
 add_library (GTPV1U
+  ${NR_RRC_DIR}/rrc_gNB_GTPV1U.c
   ${RRC_DIR}/rrc_eNB_GTPV1U.c
   ${OPENAIR3_DIR}/ocp-gtpu/gtp_itf.cpp
   )
@@ -1399,7 +1437,6 @@ add_library(SCTP_CLIENT ${SCTP_SRC})
 target_link_libraries(SCTP_CLIENT PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 set(NAS_SRC ${OPENAIR3_DIR}/NAS/)
-
 set(libnas_api_OBJS
   ${NAS_SRC}COMMON/API/NETWORK/as_message.c
   ${NAS_SRC}COMMON/API/NETWORK/nas_message.c
@@ -1439,6 +1476,10 @@ set(libnas_emm_msg_OBJS
   ${NAS_SRC}COMMON/EMM/MSG/UplinkNasTransport.c
 )
 
+set(libnas_fgs_msg_OBJS
+  ${NAS_SRC}COMMON/EMM/MSG/fgs_service_request.c
+)
+
 set(libnas_esm_msg_OBJS
   ${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.c
   ${NAS_SRC}COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.c
@@ -1627,6 +1668,61 @@ set(libnas_ue_esm_sap_OBJS
   ${NAS_SRC}UE/ESM/SAP/esm_sap.c
   )
 
+set(libnrnas_emm_msg_OBJS
+  ${NAS_SRC}COMMON/EMM/MSG/RegistrationRequest.c
+  ${NAS_SRC}COMMON/EMM/MSG/RegistrationAccept.c
+  ${NAS_SRC}COMMON/EMM/MSG/FGSIdentityResponse.c
+  ${NAS_SRC}COMMON/EMM/MSG/FGSAuthenticationResponse.c
+  ${NAS_SRC}COMMON/EMM/MSG/FGSNASSecurityModeComplete.c
+  ${NAS_SRC}COMMON/EMM/MSG/RegistrationComplete.c
+  ${NAS_SRC}COMMON/EMM/MSG/FGSUplinkNasTransport.c
+  ${NAS_SRC}COMMON/ESM/MSG/PduSessionEstablishRequest.c
+  ${NAS_SRC}COMMON/ESM/MSG/PduSessionEstablishmentAccept.c
+  ${NAS_SRC}COMMON/EMM/MSG/FGSDeregistrationRequestUEOriginating.c
+  )
+
+set(libnrnas_ies_OBJS
+  ${NAS_SRC}COMMON/IES/ExtendedProtocolDiscriminator.c
+  ${NAS_SRC}COMMON/IES/FGSMobileIdentity.c
+  ${NAS_SRC}COMMON/IES/FGSRegistrationType.c
+  ${NAS_SRC}COMMON/IES/SpareHalfOctet.c
+  ${NAS_SRC}COMMON/IES/FGSRegistrationResult.c
+  ${NAS_SRC}COMMON/IES/FGMMCapability.c
+  ${NAS_SRC}COMMON/IES/NrUESecurityCapability.c
+  ${NAS_SRC}COMMON/IES/FGCNasMessageContainer.c
+  ${NAS_SRC}COMMON/IES/SORTransparentContainer.c
+  )
+
+add_library(LIB_NAS_SIMUE
+  ${NAS_SRC}UE/nas_itti_messaging.c
+  ${NAS_SRC}UE/nas_network.c
+  ${NAS_SRC}UE/nas_parser.c
+  ${NAS_SRC}UE/nas_proc.c
+  ${NAS_SRC}UE/nas_user.c
+  ${NAS_SRC}NR_UE/nr_nas_msg.c
+  ${libnas_api_OBJS}
+  ${libnas_ue_api_OBJS}
+  ${libnas_emm_msg_OBJS}
+  ${libnas_fgs_msg_OBJS}
+  ${libnas_esm_msg_OBJS}
+  ${libnas_ies_OBJS}
+  ${libnas_utils_OBJS}
+  ${libnas_ue_emm_OBJS}
+  ${libnas_ue_emm_sap_OBJS}
+  ${libnas_ue_esm_OBJS}
+  ${libnas_ue_esm_sap_OBJS}
+  ${libnrnas_emm_msg_OBJS}
+  ${libnrnas_ies_OBJS}
+  $<TARGET_OBJECTS:ds>
+  )
+target_include_directories(LIB_NAS_SIMUE PRIVATE ${OPENAIR_DIR}/common/utils/ds/)
+target_link_libraries(LIB_NAS_SIMUE PRIVATE lte_rrc)
+
+
+
+set(NAS_SIM_LIB LIB_NAS_SIMUE)
+target_link_libraries(LIB_NAS_SIMUE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
+
 add_library(LIB_NAS_UE
   ${NAS_SRC}UE/nas_itti_messaging.c
   ${NAS_SRC}UE/nas_network.c
@@ -1666,6 +1762,15 @@ set (NBIOT_SOURCES
   )
 add_library(NB_IoT MODULE ${NBIOT_SOURCES} )
 
+add_library(LIB_5GNAS_GNB
+  ${NAS_SRC}/COMMON/nr_common.c
+  ${OPENAIR3_DIR}//UICC/usim_interface.c
+  )
+
+target_include_directories(LIB_5GNAS_GNB PRIVATE ${OPENAIR_DIR}/common/utils/ds/)
+target_link_libraries(LIB_5GNAS_GNB PRIVATE SECURITY)
+target_link_libraries(LIB_5GNAS_GNB PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
+
 # Simulation library
 ##########################
 set (SIMUSRC
@@ -1831,7 +1936,6 @@ target_link_libraries(nr-softmodem PRIVATE
   ITTI ${NAS_UE_LIB} lte_rrc nr_rrc
   ngap s1ap L2_LTE_NR L2_NR MAC_NR_COMMON NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB SIMU
   x2ap f1ap m2ap m3ap e1ap shlib_loader
-  time_management
   -Wl,--end-group z dl)
 
 target_link_libraries(nr-softmodem PRIVATE pthread m CONFIG_LIB rt sctp)
@@ -1864,7 +1968,6 @@ add_executable(nr-cuup
 target_link_libraries(nr-cuup PRIVATE
                       CONFIG_LIB ITTI SCTP_CLIENT
                       GTPV1U e1ap f1ap
-                      time_management
                       z sctp dl pthread shlib_loader ${T_LIB})
 target_link_libraries(nr-cuup PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
 if(E2_AGENT)
@@ -1885,23 +1988,20 @@ add_executable(nr-uesoftmodem
   ${OPENAIR_DIR}/radio/COMMON/common_lib.c
   ${OPENAIR_DIR}/radio/COMMON/record_player.c
   ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common.c
-  ${OPENAIR2_DIR}/LAYER2/NR_MAC_COMMON/nr_mac_common_tdd.c
+  ${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
   ${OPENAIR1_DIR}/PHY/TOOLS/phy_scope_interface.c
-  ${NFAPI_USER_DIR}/nfapi.c
-  ${PHY_INTERFACE_DIR}/queue_t.c
   )
 
 target_link_libraries(nr-uesoftmodem PRIVATE
   -Wl,--start-group
   nr_rrc SECURITY UTIL HASHTABLE SCHED_RU_LIB SCHED_NR_UE_LIB
-  PHY_COMMON PHY_NR_COMMON PHY_NR_UE NR_L2_UE MAC_NR_COMMON NFAPI_LIB
-  ITTI SIMU shlib_loader
-  time_management
+  PHY_COMMON PHY_NR_COMMON PHY_NR_UE NR_L2_UE L2_UE_LTE_NR MAC_NR_COMMON NFAPI_LIB NFAPI_PNF_LIB
+  NFAPI_USER_LIB MISC_NFAPI_NR_LIB
+  ITTI LIB_5GNAS_GNB LIB_NAS_SIMUE ${NAS_SIM_LIB} SIMU shlib_loader
   -Wl,--end-group z dl)
 
 target_link_libraries(nr-uesoftmodem PRIVATE pthread m CONFIG_LIB rt nr_ue_phy_meas)
 target_link_libraries(nr-uesoftmodem PRIVATE ${T_LIB})
-target_link_libraries(nr-uesoftmodem PRIVATE nr_nas lib_uicc usim_lib)
 target_link_libraries(nr-uesoftmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 # force the generation of ASN.1 so that we don't need to wait during the build
@@ -1954,37 +2054,36 @@ target_link_libraries(smallblocktest PRIVATE
 
 
 add_executable(ldpctest
-  ${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/ldpctest.c
-  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_load.c
-)
+   ${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/ldpctest.c
+   )
 target_link_libraries(ldpctest PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON -Wl,--end-group
-  m pthread dl shlib_loader ${T_LIB}
-  # link 'check_crc' to make it resolved in the LDPC coding libraries
-  # 'check_crc' is not used in ldpctest so it is not linked in the executable by default
-  # --whole-archive links 'check_crc' in the executable even though it is note used, see 'man ld'
-  -Wl,--whole-archive crc_byte -Wl,--no-whole-archive
-)
+  m pthread dl shlib_loader ${T_LIB} nr_coding_segment_utils
+  )
 
-add_library(physim_common OBJECT ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_unitary_common.c)
-target_link_libraries(physim_common PRIVATE UTIL)
-
-add_executable(nr_dlschsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlschsim.c)
+add_executable(nr_dlschsim
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlschsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
+  )
 target_link_libraries(nr_dlschsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader physim_common
+  m pthread ${T_LIB} ITTI dl shlib_loader
   )
 target_link_libraries(nr_dlschsim PRIVATE asn1_nr_rrc_hdrs)
 
-add_executable(nr_pbchsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pbchsim.c)
+add_executable(nr_pbchsim
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pbchsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
+  )
 target_link_libraries(nr_pbchsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader physim_common
+  m pthread ${T_LIB} ITTI dl shlib_loader
 )
 target_link_libraries(nr_pbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 add_executable(nr_psbchsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/psbchsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
   ${OPENAIR_DIR}/executables/softmodem-common.c
   ${NR_UE_RRC_DIR}/rrc_nsa.c
   ${NFAPI_USER_DIR}/nfapi.c
@@ -1993,19 +2092,24 @@ add_executable(nr_psbchsim
   )
 target_link_libraries(nr_psbchsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -lz -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader physim_common
+  m pthread ${T_LIB} ITTI dl shlib_loader
   )
 target_link_libraries(nr_psbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
-add_executable(nr_pucchsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pucchsim.c)
+#PUCCH ---> Prashanth
+add_executable(nr_pucchsim
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pucchsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
+  )
 target_link_libraries(nr_pucchsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader physim_common
+  m pthread ${T_LIB} ITTI dl shlib_loader
 )
 target_link_libraries(nr_pucchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 add_executable(nr_dlsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
   ${OPENAIR_DIR}/executables/softmodem-common.c
   ${NR_UE_RRC_DIR}/rrc_nsa.c
   ${NFAPI_USER_DIR}/nfapi.c
@@ -2014,28 +2118,33 @@ add_executable(nr_dlsim
   )
 target_link_libraries(nr_dlsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON nr_rrc CONFIG_LIB L2_NR HASHTABLE x2ap SECURITY ngap -lz -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader nr_ue_phy_meas physim_common
+  m pthread ${T_LIB} ITTI dl shlib_loader nr_ue_phy_meas
   )
 target_link_libraries(nr_dlsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
-add_executable(nr_prachsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/prachsim.c)
+add_executable(nr_prachsim
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/prachsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
+)
 target_link_libraries(nr_prachsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB CONFIG_LIB -lz -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader physim_common)
+  m pthread ${T_LIB} ITTI dl shlib_loader)
 target_link_libraries(nr_prachsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 add_executable(nr_ulschsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulschsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
   ${PHY_INTERFACE_DIR}/queue_t.c
   )
 target_link_libraries(nr_ulschsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader physim_common
+  m pthread ${T_LIB} ITTI dl shlib_loader
 )
 target_link_libraries(nr_ulschsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 add_executable(nr_ulsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulsim.c
+  ${OPENAIR1_DIR}/SIMULATION/NR_PHY/nr_dummy_functions.c
   ${OPENAIR_DIR}/executables/softmodem-common.c
   ${NR_UE_RRC_DIR}/rrc_nsa.c
   ${NFAPI_USER_DIR}/nfapi.c
@@ -2045,7 +2154,7 @@ add_executable(nr_ulsim
 
 target_link_libraries(nr_ulsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON nr_rrc CONFIG_LIB L2_NR HASHTABLE x2ap SECURITY ngap -lz -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl shlib_loader nr_ue_phy_meas physim_common
+  m pthread ${T_LIB} ITTI dl shlib_loader nr_ue_phy_meas
   )
 target_link_libraries(nr_ulsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
@@ -2063,7 +2172,6 @@ foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim pr
     pthread m rt CONFIG_LIB ${T_LIB} dl shlib_loader
     )
   target_link_libraries(${myExe} PRIVATE asn1_lte_rrc_hdrs)
-  add_dependencies(${myExe} coding)
 
 endforeach(myExe)
 
@@ -2086,6 +2194,10 @@ foreach(myExe s1ap
     )
 endforeach(myExe)
 
+# to be added
+#../targets/TEST/PDCP/test_pdcp.c
+#../targets/TEST/PDCP/with_rlc/test_pdcp_rlc.c
+
 #ensure that the T header files are generated before targets depending on them
 if (${T_TRACER})
   foreach(i
@@ -2102,10 +2214,10 @@ if (${T_TRACER})
         SECURITY SCHED_LIB SCHED_NR_LIB SCHED_RU_LIB SCHED_UE_LIB SCHED_NR_UE_LIB default_sched remote_sched RAL
         NFAPI_LIB NFAPI_PNF_LIB NFAPI_VNF_LIB NFAPI_USER_LIB
         MISC_NFAPI_LTE_LIB MISC_NFAPI_NR_LIB
-        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU
-        L2 L2_LTE L2_NR L2_LTE_NR L2_UE NR_L2_UE MAC_NR_COMMON MAC_UE_NR ngap
+        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU PHY_MEX
+        L2 L2_LTE L2_NR L2_LTE_NR L2_UE NR_L2_UE L2_UE_LTE_NR MAC_NR_COMMON MAC_UE_NR ngap
         CN_UTILS GTPV1U SCTP_CLIENT MME_APP LIB_NAS_UE NB_IoT SIMU OPENAIR0_LIB
-        dfts config_internals nr_common crc_byte)
+        dfts config_internals nr_common)
     if (TARGET ${i})
       add_dependencies(${i} generate_T)
     endif()
@@ -2116,18 +2228,12 @@ include(${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/CMakeLists.txt)
 
 set(ENABLE_TESTS OFF CACHE STRING "Activate build of tests")
 set_property(CACHE ENABLE_TESTS PROPERTY TYPE BOOL)
-set(ENABLE_PHYSIM_TESTS OFF CACHE STRING "Activate build of physim tests")
-set_property(CACHE ENABLE_PHYSIM_TESTS PROPERTY TYPE BOOL)
-
-if(ENABLE_TESTS OR ENABLE_PHYSIM_TESTS)
+if(ENABLE_TESTS)
+  # activates globally adding tests such that they can be run using ctest
+  enable_testing()
   # meta-target: each test is supposed to add_dependencies(tests ${NEWTEST})
   # then, it is possible to build and execute all tests using "ninja tests && ctest"
   add_custom_target(tests)
-  # activates globally adding tests such that they can be run using ctest
-  enable_testing()
-endif()
-
-if(ENABLE_TESTS)
   find_package(GTest)
   if (NOT GTest_FOUND)
     message(STATUS "GTest package not found, will download googletest automatically. To prevent that install google test on your system (libgtest-dev)")

README.md

@@ -4,9 +4,10 @@
 
 <p align="center">
     <a href="https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/master/LICENSE"><img src="https://img.shields.io/badge/license-OAI--Public--V1.1-blue" alt="License"></a>
+    <a href="https://releases.ubuntu.com/20.04/"><img src="https://img.shields.io/badge/OS-Ubuntu20-Green" alt="Supported OS Ubuntu 20"></a>
     <a href="https://releases.ubuntu.com/22.04/"><img src="https://img.shields.io/badge/OS-Ubuntu22-Green" alt="Supported OS Ubuntu 22"></a>
     <a href="https://releases.ubuntu.com/24.04/"><img src="https://img.shields.io/badge/OS-Ubuntu24-Green" alt="Supported OS Ubuntu 24"></a>
-    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RHEL9"></a>
+    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RELH9"></a>
     <a href="https://getfedora.org/en/workstation/"><img src="https://img.shields.io/badge/OS-Fedore41-Green" alt="Supported OS Fedora 41"></a>
 </p>
 
@@ -15,9 +16,7 @@
 </p>
 
 <p align="center">
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu18-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu18-Image-Builder%2F&label=build-Ubuntu-x86%20Images"></a>
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-RHEL8-Cluster-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-RHEL8-Cluster-Image-Builder%2F&label=build-UBI-x86%20Images"></a>
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu-ARM-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu-ARM-Image-Builder%2F&label=build-Ubuntu-ARM%20Images"></a>
+    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Container-Parent/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Container-Parent%2F&label=build%20Images"></a>
 </p>
 
 <p align="center">

charts/physims-4g/values.yaml

@@ -1,21 +0,0 @@
-# Default values for oai-physim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global:
-  serviceAccountName: oai-physim-sa
-  namespace: "OAICICD_PROJECT"
-  image:
-    registry: local
-    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-core-for-ci-ran/oai-physim
-    version: TAG
-    # pullPolicy: IfNotPresent or Never or Always
-    pullPolicy: Always
-  # removing the node selector
-  # will place on two nodes intel 3rd gen and 5th gen with RT kernel
-  nodeSelector:
-    type: ran
-  nodeName: ''
-  resources:
-    define: false
-    requests:
-      cpu: 1.5

charts/physims-5g/templates/rbac.yaml

@@ -1,26 +0,0 @@
-apiVersion: rbac.authorization.k8s.io/v1
-kind: Role
-metadata:
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
-rules:
-- apiGroups:
-  - security.openshift.io
-  resourceNames:
-  - anyuid
-  resources:
-  - securitycontextconstraints
-  verbs:
-  - use
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: RoleBinding
-metadata:
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-binding
-subjects:
-- kind: ServiceAccount
-  name: {{ .Values.global.serviceAccountName }}
-  namespace: {{ .Release.Namespace }}
-roleRef:
-  kind: Role
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
-  apiGroup: rbac.authorization.k8s.io

charts/physims-5g/templates/serviceaccount.yaml

@@ -1,4 +0,0 @@
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  name: oai-physim-sa #{{ .Values.global.serviceAccountName }}

charts/physims-5g/values.yaml

@@ -1,21 +0,0 @@
-# Default values for oai-physim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global:
-  serviceAccountName: oai-physim-sa
-  namespace: "OAICICD_PROJECT"
-  image:
-    registry: local
-    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-core-for-ci-ran/oai-physim
-    version: TAG
-    # pullPolicy: IfNotPresent or Never or Always
-    pullPolicy: Always
-  # removing the node selector
-  # will place on two nodes intel 3rd gen and 5th gen with RT kernel
-  nodeSelector:
-    type: ran
-  nodeName: ''
-  resources:
-    define: false
-    requests:
-      cpu: 1.5

charts/physims/charts/dlsim.100rb+tm2/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-dlsim-100rb-tm2
+description: A Helm subchart for dlsim network function ("100rb+tm2" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - dlsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim.100rb+tm2/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-dlsim-100rb-tm2.labels" -}}
+helm.sh/chart: {{ include "oai-dlsim-100rb-tm2.chart" . }}
+{{ include "oai-dlsim-100rb-tm2.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-dlsim-100rb-tm2.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-dlsim-100rb-tm2.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-dlsim-100rb-tm2.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-dlsim-100rb-tm2.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/dlsim.100rb+tm2/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -31,9 +26,8 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          ctest -R 5g --show-only=json-v1 >> physims-5g-tests.json &&
-          ctest -R 5g -j$(nproc) --output-junit physims-5g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
-          echo "FINISHED" && sleep 20
+          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.100rb+tm2" -d bin/ &&
+          echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -43,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.physims5g }}
+      {{- if .Values.global.nodeName.dlsim100rbtm2}}
+      nodeName: {{ .Values.global.nodeName.dlsim100rbtm2 }}
       {{- end }}

charts/physims/charts/dlsim.100rb+tm2/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-dlsim-100rb+tm2
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-dlsim-100rb-tm2"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/dlsim.basic/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-dlsim-basic
+description: A Helm subchart for dlsim network function ("basic" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - dlsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim.basic/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-dlsim-basic.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-dlsim-basic.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-dlsim-basic.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-dlsim-basic.labels" -}}
+helm.sh/chart: {{ include "oai-dlsim-basic.chart" . }}
+{{ include "oai-dlsim-basic.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-dlsim-basic.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-dlsim-basic.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-dlsim-basic.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/dlsim.basic/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}    
+spec:
+  template:
+    metadata:
+      labels:
+         app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.basic" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }} 
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.dlsimbasic}}
+      nodeName: {{ .Values.global.nodeName.dlsimbasic }}
+      {{- end }}

charts/physims/charts/dlsim.basic/values.yaml

@@ -0,0 +1,44 @@
+# Default values for oai-dlsim-basic
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-dlsim-basic"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources:
+   limits:
+     cpu: 100m
+     memory: 128Mi
+   requests:
+     cpu: 100m
+     memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ldpctest/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physims-5g
-description: A Helm subchart for 5G physims network function
+name: oai-ldpctest
+description: A Helm subchart for ldpctest network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,6 +24,7 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
+  - ldpctest
   - RAN
   - 5G
 

charts/physims/charts/ldpctest/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-physims-5g.name" -}}
+{{- define "oai-ldpctest.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-physims-5g.fullname" -}}
+{{- define "oai-ldpctest.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-physims-5g.chart" -}}
+{{- define "oai-ldpctest.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-physims-5g.labels" -}}
-helm.sh/chart: {{ include "oai-physims-5g.chart" . }}
-{{ include "oai-physims-5g.selectorLabels" . }}
+{{- define "oai-ldpctest.labels" -}}
+helm.sh/chart: {{ include "oai-ldpctest.chart" . }}
+{{ include "oai-ldpctest.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-physims-5g.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-physims-5g.name" . }}
+{{- define "oai-ldpctest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ldpctest.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-physims-5g.serviceAccountName" -}}
+{{- define "oai-ldpctest.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-physims-5g.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-ldpctest.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims/charts/ldpctest/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -31,9 +26,8 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          ctest -R 4g --show-only=json-v1 >> physims-4g-tests.json &&
-          ctest -R 4g -j$(nproc) --output-junit physims-4g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
-          echo "FINISHED" && sleep 15
+          cmake_targets/autotests/run_exec_autotests.bash -g "ldpctest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -43,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.physims5g }}
+      {{- if .Values.global.nodeName.ldpctest}}
+      nodeName: {{ .Values.global.nodeName.ldpctest }}
       {{- end }}

charts/physims/charts/ldpctest/values.yaml

@@ -1,4 +1,4 @@
-# Default values for oai-physims-5g
+# Default values for oai-ldpctest.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
@@ -20,7 +20,7 @@ serviceAccount:
   annotations: {}
   # The name of the service account to use.
   # If not set and create is true, a name is generated using the fullname template
-  name: "oai-physims-5g"
+  name: "oai-ldpctest-sa"
 
 podSecurityContext:
   runAsUser: 0

charts/physims/charts/nr-dlschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlschsim
+description: A Helm subchart for nr-dlschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlschsim.chart" . }}
+{{ include "oai-nr-dlschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlschsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlschsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlschsim}}
+      nodeName: {{ .Values.global.nodeName.nrdlschsim }}
+      {{- end }}

charts/physims/charts/nr-dlschsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.basic/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-basic
+description: A Helm subchart for nr-dlsim network function ("basic" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.basic/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-basic.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-basic.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-basic.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-basic.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-basic.chart" . }}
+{{ include "oai-nr-dlsim-basic.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-basic.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-basic.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-basic.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.basic/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.basic" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimbasic}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimbasic }}
+      {{- end }}

charts/physims/charts/nr-dlsim.basic/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-basic
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-basic"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.dmrs+ptrs/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-dmrs-ptrs
+description: A Helm subchart for nr-dlsim network function ("dmrs+ptrs" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-dmrs-ptrs.chart" . }}
+{{ include "oai-nr-dlsim-dmrs-ptrs.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-dmrs-ptrs.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-dmrs-ptrs.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.dmrs+ptrs" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimdmrsptrs}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimdmrsptrs }}
+      {{- end }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-dmrs+ptrs
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-dmrs-ptrs"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.mcs+mimo/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-mcs-mimo
+description: A Helm subchart for nr-dlsim network function ("mcs+mimo" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.mcs+mimo/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-mcs-mimo.chart" . }}
+{{ include "oai-nr-dlsim-mcs-mimo.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-mcs-mimo.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-mcs-mimo.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.mcs+mimo/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.mcs+mimo" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimmcsmimo}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimmcsmimo }}
+      {{- end }}

charts/physims/charts/nr-dlsim.mcs+mimo/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-mcs-mimo
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-mcs-mimo"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.offset/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-offset
+description: A Helm subchart for nr-dlsim network function ("offset" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.offset/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-offset.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-offset.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-offset.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-offset.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-offset.chart" . }}
+{{ include "oai-nr-dlsim-offset.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-offset.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-offset.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-offset.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-offset.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.offset/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.offset" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimoffset}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimoffset }}
+      {{- end }}

charts/physims/charts/nr-dlsim.offset/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-offset
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-offset"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.106rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-106rb
+description: A Helm subchart for nr-pbchsim network function ("106rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.106rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-106rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-106rb.chart" . }}
+{{ include "oai-nr-pbchsim-106rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-106rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-106rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-106rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-106rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.106rb/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.106rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbschsim106rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbschsim106rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.106rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-106rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-106rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.217rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-217rb
+description: A Helm subchart for nr-pbchsim network function ("217rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.217rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-217rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-217rb.chart" . }}
+{{ include "oai-nr-pbchsim-217rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-217rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-217rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-217rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-217rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.217rb/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.217rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbchsim217rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim217rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.217rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-217rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-217rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.273rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-273rb
+description: A Helm subchart for nr-pbchsim network function ("273rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.273rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-273rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-273rb.chart" . }}
+{{ include "oai-nr-pbchsim-273rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-273rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-273rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-273rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-273rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.273rb/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.273rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbchsim273rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.273rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-273rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-273rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.scs/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-scs
+description: A Helm subchart for nr-pbchsim network function ("Other SCS" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.scs/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-scs.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-scs.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-scs.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-scs.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-scs.chart" . }}
+{{ include "oai-nr-pbchsim-scs.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-scs.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-scs.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-scs.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-scs.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.scs/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.otherSCS" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbchsim273rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.scs/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-scs
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-scs"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-prachsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-prachsim
+description: A Helm subchart for nr-prachsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-prachsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-prachsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-prachsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-prachsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-prachsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-prachsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-prachsim.chart" . }}
+{{ include "oai-nr-prachsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-prachsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-prachsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-prachsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-prachsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-prachsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_prachsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrprachsim}}
+      nodeName: {{ .Values.global.nodeName.nrprachsim }}
+      {{- end }}

charts/physims/charts/nr-prachsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-prachsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-prachsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-psbchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-psbchsim
+description: A Helm subchart for nr-psbchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-psbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-psbchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-psbchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-psbchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-psbchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-psbchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-psbchsim.chart" . }}
+{{ include "oai-nr-psbchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-psbchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-psbchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-psbchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-psbchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-psbchsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_psbchsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpsbchsim}}
+      nodeName: {{ .Values.global.nodeName.nrpsbchsim }}
+      {{- end }}

charts/physims/charts/nr-psbchsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-psbchsim
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-psbchsim"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pucchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pucchsim
+description: A Helm subchart for nr-pucchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pucchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pucchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pucchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pucchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pucchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pucchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pucchsim.chart" . }}
+{{ include "oai-nr-pucchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pucchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pucchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pucchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pucchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pucchsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pucchsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpucchsim}}
+      nodeName: {{ .Values.global.nodeName.nrpucchsim }}
+      {{- end }}

charts/physims/charts/nr-pucchsim/values.yaml

@@ -0,0 +1,52 @@
+# Default values for oai-nr-pucchsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pucchsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulschsim
+description: A Helm subchart for nr-ulschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulschsim.chart" . }}
+{{ include "oai-nr-ulschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulschsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulschsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulschsim}}
+      nodeName: {{ .Values.global.nodeName.nrulschsim }}
+      {{- end }}

charts/physims/charts/nr-ulschsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.3gpp/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-3gpp
+description: A Helm subchart for nr-ulsim network function ("3gpp" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.3gpp/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-3gpp.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-3gpp.chart" . }}
+{{ include "oai-nr-ulsim-3gpp.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-3gpp.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-3gpp.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-3gpp.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.3gpp/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.3gpp" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsim3gpp}}
+      nodeName: {{ .Values.global.nodeName.nrulsim3gpp }}
+      {{- end }}

charts/physims/charts/nr-ulsim.3gpp/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-3gpp
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-3gpp"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.mimo/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-mimo
+description: A Helm subchart for nr-ulsim network function ("mimo" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.mimo/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-mimo.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-mimo.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-mimo.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-mimo.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-mimo.chart" . }}
+{{ include "oai-nr-ulsim-mimo.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-mimo.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-mimo.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-mimo.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.mimo/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.mimo" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimmimo}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmimo }}
+      {{- end }}

charts/physims/charts/nr-ulsim.mimo/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-mimo
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-mimo"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.misc/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-misc
+description: A Helm subchart for nr-ulsim network function ("misc" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.misc/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-misc.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-misc.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-misc.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-misc.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-misc.chart" . }}
+{{ include "oai-nr-ulsim-misc.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-misc.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-misc.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-misc.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.misc/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.misc" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimmisc}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmisc }}
+      {{- end }}

charts/physims/charts/nr-ulsim.misc/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-misc
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-misc"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.sc-fdma/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-sc-fdma
+description: A Helm subchart for nr-ulsim network function ("sc-fdma" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.sc-fdma/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-sc-fdma.chart" . }}
+{{ include "oai-nr-ulsim-sc-fdma.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-sc-fdma.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.sc-fdma/templates/job.yaml

@@ -0,0 +1,44 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.sc-fdma" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimscfdma}}
+      nodeName: {{ .Values.global.nodeName.nrulsimscfdma }}
+      {{- end }}

charts/physims/charts/nr-ulsim.sc-fdma/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-sc-fdma
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-sc-fdma"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/polartest/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physim
-description: A Helm chart for physical simulators network function
+name: oai-polartest
+description: A Helm subchart for polartest network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -16,17 +16,17 @@ icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_fin
 
 # This is the chart version. This version number should be incremented each time you make changes
 # to the chart and its templates, including the app version.
-version: 1.0.0
+version: 0.1.1
 
 # This is the version number of the application being deployed. This version number should be
 # incremented each time you make changes to the application.
 appVersion: v1
 
 keywords:
-  - Physical Simulators
+  - Physical Simulator
+  - polartest
   - RAN
   - 4G
-  - 5G
 
 sources:
   - https://gitlab.eurecom.fr/oai/openairinterface5g

charts/physims/charts/polartest/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-physims-4g.name" -}}
+{{- define "oai-polartest.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-physims-4g.fullname" -}}
+{{- define "oai-polartest.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-physims-4g.chart" -}}
+{{- define "oai-polartest.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-physims-4g.labels" -}}
-helm.sh/chart: {{ include "oai-physims-4g.chart" . }}
-{{ include "oai-physims-4g.selectorLabels" . }}
+{{- define "oai-polartest.labels" -}}
+helm.sh/chart: {{ include "oai-polartest.chart" . }}
+{{ include "oai-polartest.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-physims-4g.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-physims-4g.name" . }}
+{{- define "oai-polartest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-polartest.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-physims-4g.serviceAccountName" -}}
+{{- define "oai-polartest.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-physims-4g.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-polartest.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims/charts/polartest/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "polartest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.polartest}}
+      nodeName: {{ .Values.global.nodeName.polartest }}
+      {{- end }}

charts/physims/charts/polartest/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-polartest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-polartest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/smallblocktest/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-smallblocktest
+description: A Helm subchart for smallblocktest network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - smallblocktest
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/smallblocktest/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-smallblocktest.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-smallblocktest.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-smallblocktest.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-smallblocktest.labels" -}}
+helm.sh/chart: {{ include "oai-smallblocktest.chart" . }}
+{{ include "oai-smallblocktest.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-smallblocktest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-smallblocktest.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-smallblocktest.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-smallblocktest.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/smallblocktest/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "smallblocktest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.smallblocktest}}
+      nodeName: {{ .Values.global.nodeName.smallblocktest }}
+      {{- end }}

charts/physims/charts/smallblocktest/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-smallblocktest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-smallblocktest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ulsim/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physims-4g
-description: A Helm subchart for 4G physims network function
+name: oai-ulsim
+description: A Helm subchart for ulsim network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,6 +24,7 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
+  - ulsim
   - RAN
   - 4G
 

charts/physims/charts/ulsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-ulsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-ulsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-ulsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-ulsim.labels" -}}
+helm.sh/chart: {{ include "oai-ulsim.chart" . }}
+{{ include "oai-ulsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-ulsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ulsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-ulsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/ulsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "ulsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.ulsim}}
+      nodeName: {{ .Values.global.nodeName.ulsim }}
+      {{- end }}

charts/physims/charts/ulsim/values.yaml

@@ -1,4 +1,4 @@
-# Default values for oai-physims-4g
+# Default values for oai-ulsim.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
@@ -20,7 +20,7 @@ serviceAccount:
   annotations: {}
   # The name of the service account to use.
   # If not set and create is true, a name is generated using the fullname template
-  name: "oai-physims-4g"
+  name: "oai-ulsim-sa"
 
 podSecurityContext:
   runAsUser: 0