Compare commits

...

315 Commits

Author SHA1 Message Date
Bartosz Podrygajlo
3904d74658 Attempt to fix the ORU hanging issue
In an attempt to make the ORU interrupt more robust, move the timing thread
stop at the very end of vrtism_end function. This will give an extra second to
applications threads to finalize read operations and stop correctly.
2025-12-04 09:13:10 +01:00
Bartosz Podrygajlo
5e0ae8ba05 Correctly reset new thread affinity in case its -1
In case the new thread affinity is -1, instead of reseting affinity
to all cores set the affinity mask to the affinity of the process.
This way if e.g. taskset is used, threads that are assinged -1 affinity
will not move to cores outside configured taskset.
2025-12-04 09:07:01 +01:00
Bartosz Podrygajlo
6c16fce1d0 ORU: Quarter slot parallelization for DL FH processing
Implemented quarter slot parallelization using thread pool for DL FH
processing. The number of threads started is equal to number of antennas
 x 2. However due to O-RU already processing DL in half slot intervals,
the number of threads per antenna per slot is equal to 4. This achieves
quarter-slot parallelization,

To configure, use legacy RU `num_tp_cores` and `tp_cores` config values
in conf files.
2025-12-04 09:00:33 +01:00
Bartosz Podrygajlo
68dc50c491 Add timespec printout to dump_nonzero_symbol 2025-12-04 08:12:11 +01:00
Bartosz Podrygajlo
531a100bdd Add sync thread to O-RU 2025-12-03 11:17:06 +01:00
Bartosz Podrygajlo
c750b9acd0 Hack for PRACH format B4 O-RU
A hacky solution to make PRACH format B4 work on O-RU. This limits the PRACH
symbol accumulation to first four symbols, making PRACH that much faster. This
is not a proper solution - a proper solution would require to write a symbol
based PRACH receiver. A slight complication is that the PRACH symbol does not
conicide with the OFDM symbl boundary.
2025-12-02 19:31:35 +01:00
Bartosz Podrygajlo
954a17ed70 Clear memory in shm_td_iq_channel after RX
Clear memory in shm_td_iq_channel after RX. This prevents the IQ
from being read twice. This can happen if the application crashes
and will keep the other side reading historical IQ samples.
2025-11-28 09:00:28 +01:00
Bartosz Podrygajlo
5ff23f62c2 Add fix patch for oran RX window end callback 2025-11-25 12:29:28 +01:00
Bartosz Podrygajlo
6f286e48fc conf files from my local setup
these conf files are used in my local setup. I use x710 intel NIC to
create 2 paris of inter-connected VFs using separate VLAN tags for
Cplane and Uplane. See setup_ru_ifs.sh for details.
2025-11-25 11:54:02 +01:00
Bartosz Podrygajlo
8f2e2123be PRACH debugging commit 2025-11-25 11:50:07 +01:00
Bartosz Podrygajlo
aabdb6efb1 Add T2a delay profile parameter 2025-11-25 11:49:42 +01:00
Bartosz Podrygajlo
b8b510a185 Fix (?) PRACH TX 2025-11-25 11:49:19 +01:00
Bartosz Podrygajlo
7bc6a11f78 Couple of debugging prints 2025-11-25 11:49:01 +01:00
Bartosz Podrygajlo
b309482118 Fix xran callback installation for O-RU
Install callback using updated xran library.
2025-11-21 15:12:17 +01:00
Bartosz Podrygajlo
450c2d8b95 PUSCH updates for O-RU 2025-11-18 16:46:07 +01:00
Bartosz Podrygajlo
981e3adc19 ORU: Receive PUSCH and send via xran 2025-11-12 09:04:03 +01:00
Bartosz Podrygajlo
623496b2a7 Correct timestamp generation code in symbol_callback 2025-11-11 19:19:22 +01:00
Bartosz Podrygajlo
3f7b5310c1 O-RU PRACH reception 2025-11-07 14:35:15 +01:00
Bartosz Podrygajlo
fea2086560 Enable instrumentation of nr-softmodem 2025-11-07 14:35:15 +01:00
Bartosz Podrygajlo
c7b8e7fd82 Fix tracy package version 2025-11-07 14:35:15 +01:00
Bartosz Podrygajlo
ff0eec582a Update threadCreate
Two modifications for threadCreate:
 - if -1 is passed, the thread no longer inherits its parent affinity.
   instead thread affnity is cleared
 - if the name is too long, the thread name is shorted to maximum
   pthread name (16 characters).
2025-11-07 14:35:15 +01:00
Bartosz Podrygajlo
a34852f24f Add xran patch for PRACH transmission
Add a fix for a segmentation fault at the DU due to incorrect filter_id field
in packets generated by the O-RU for PRACH.
2025-11-06 10:24:19 +01:00
Bartosz Podrygajlo
3735e8a5df O-RU: Synchronize north read to south read threads.
Perform synchronization between input sample from split8
device and split 7.2 timestamp via a fifo queue between threads.
2025-11-06 10:17:33 +01:00
Bartosz Podrygajlo
c60338659f O-RU test reproduction steps 2025-11-06 10:17:25 +01:00
Bartosz Podrygajlo
594d81d3b9 ORU: Fix incorrect pointer to txdataF_BF
Overwrite RU_t common->txdataF_BF with the buffer pointer used by O-RU.
TODO: cleanup the code so this is not needed.
2025-11-06 10:17:18 +01:00
Bartosz Podrygajlo
d01f7e38fb O-RU: Add missing symbol rotation initialization 2025-11-06 10:17:09 +01:00
Bartosz Podrygajlo
9b70ee6374 Fix decompression for O-RU. 2025-11-06 10:16:58 +01:00
Bartosz Podrygajlo
ed44194ff5 Replace tx_rf with tx_rf_symbols in ORU
Fix the O-RU per symbol transmission.
2025-11-06 10:16:51 +01:00
Bartosz Podrygajlo
f93d1ded10 Add a new tx_rf_symbols function to allow per symbol transmission 2025-11-06 10:16:40 +01:00
Bartosz Podrygajlo
12d0ca747c Add symbol timing functions for NR_DL_FRAME_PARMS
Add two new functions for calculation symbol timestamp and symbol
duration for NR_DL_FRAME_PARMS. These functions are not using
the existing indirection mechanism via function pointers as this
prevents the compiler from properly optimizing the code.
2025-11-06 10:16:31 +01:00
Bartosz Podrygajlo
6952a67101 O-RU: Reset nSecDesc on symbol reception
This is required as xran does not manage this value by itself.
Not resetting this will cause nSecDesc to go above the maximum
supported number of sections per symbol and sections to be discarded.
2025-11-06 10:16:24 +01:00
Bartosz Podrygajlo
d922d45599 Fix lte-softmodem and oairu builds 2025-11-06 10:16:17 +01:00
Bartosz Podrygajlo
7bbeec3eb2 Offset timestamp_tx in O-RU by intended symbol
Add sample offset from symbol to timestamp_tx based on symbol
indicated by oran api.
2025-11-06 10:16:10 +01:00
Bartosz Podrygajlo
bcb158cafc Workarond for a bug in callback mechanism in XRAN
Update symbol_callback to detect and correct an issue with the calculated
frame index. This is caused by an issue with the timer functionality
in libxran where if a timer is setup close to the GPS second start
the sfn offset `xran_sfn_at_sec_start` is not setup correctly causing
the frame in xran_sense_of_time struct to be returned with an offset
of 100 frames (1 second).
2025-11-06 10:16:01 +01:00
Bartosz Podrygajlo
6e66b9fc3f Ensure ofdm_offset_divisor is set in O-RU.
Hardcode ofdm_offset_divisor to 8 in O-RU.
2025-11-06 10:15:54 +01:00
Bartosz Podrygajlo
49e652c9c6 Simplify vrtsim timing job thread. 2025-11-06 10:15:47 +01:00
Bartosz Podrygajlo
19a418cd17 Clean exit for the ORU
- Handle SIGINT
 - Print DL FH processing meas
 - Stop & terminate xran and vrtsim
2025-11-06 10:15:38 +01:00
Bartosz Podrygajlo
684dd38dca Use synchronized rfdevice to xran timestamps in ORU
Synchronize the southbound (time domain) interface to XRAN timestamps
in ORU. This currently only works with vrtsim.

Transmit the samples after processing in oru_downlink_processing.
2025-11-06 10:15:30 +01:00
Bartosz Podrygajlo
bd2c9c32c0 Load vrtsim in O-RU and start reading samples
Added oru_south_read_thread that reads samples from vrtsim.
No UL FH processing is done as of this commit.
2025-11-06 10:15:21 +01:00
Bartosz Podrygajlo
801086e401 Print xran counters to stdout in xran_fh_tx_read_slot 2025-11-06 10:15:14 +01:00
Bartosz Podrygajlo
9e95a2ccde Add get_timestamp to openair_device_t and vrtsim
This function can be used to convert a timespec struct to a
openair0_timestamp. It can be used to synchronize the realtime
clock to the device sample number.
2025-11-06 10:13:46 +01:00
Bartosz Podrygajlo
e48661d8cf Add a periodic print out of the O-RU north read thread 2025-11-06 10:13:36 +01:00
Bartosz Podrygajlo
9e94745f65 Add a config file for O-RU from broadbill 2025-11-06 10:12:59 +01:00
Bartosz Podrygajlo
7ba28c1d05 DL FH processing for O-RU
Add DFT and symbol rotation to O-RU
2025-11-06 10:12:48 +01:00
Bartosz Podrygajlo
b0caad9c40 O-RU: Add north_read thread
Added north read thread that can utilize north_in function for timing
and providing IQ data from the XRAN library.
2025-11-06 10:12:24 +01:00
Bartosz Podrygajlo
b2c62c7cd4 Add north_in function to oran_fhlib_5g
The north_in function is supposed to be used by the ORU to read IQ data
sent from O-DU.
2025-11-06 10:12:15 +01:00
Mario Joa-Ng
ed7c1057c5 Use no of fh_config in configuration file to determine the number of peers
Determine number of DU for RU config file or no of RU for DU config file
based on number of fh_config elements.
2025-11-06 10:12:08 +01:00
Raymond Knopp
c3bd911938 Initial implementation of O-RU for 7.2 emulator
Added new executable oainr_ru which acts as a 7.2 O-RU.

Co-authored-by: Bartosz Podrygajlo <bartosz.podrygajlo@openairinterface.org>
Co-authored-by: Mario Joa-Ng <mario.joa-ng@openairinterface.org>
2025-11-06 10:12:01 +01:00
Bartosz Podrygajlo
5bb7a4d274 FD RFSimulator adaptation layer
A new radio library for use with the gNB. It performs the same tasks as an O-RU
and is meant for testing O-DU functionalities. It acts as an RFSim server with
a frequency domain interface.
2025-11-06 10:11:12 +01:00
Bartosz Podrygajlo
decd8ae8ac Add a function which loads the specified radio library 2025-11-06 10:11:03 +01:00
Jaroslava Fiedlerova
f9b4fe6a94 Merge branch 'integration_2025_w44' into 'develop'
Integration `2025.w44`

* !3721 improvements in formatting and LOGs in DMRS common functions at MAC
* !3725 Handle GTP receiver errors, fix memory leaks, add CU-UP test
* !3726 fix for CSI payload sizes in PUCCH structure at UE
* CI: Adjust attenutation for HO setup
* !3728 Fix for scenario with no CSI report configured for CSI-RS
* !3731 CI: ensure clean iperf3 server startup
* !3592 Refactor PRACH handling at the gNB
* !3682 Refactor DLSCH scheduler
* !3733 Clarify whitespace
* !3706 Change registry name env var content

Closes #1015 and #1014

See merge request oai/openairinterface5g!3727
2025-10-31 15:55:42 +00:00
Jaroslava Fiedlerova
5a6d253863 Merge remote-tracking branch 'origin/changeRegName' into integration_2025_w44 (!3706)
Change registry name env var content

Currently setting REGISTRY="" in a .env file results in docker failing to find
/image-name:tag. This corrects that, so it looks for local images named
image-name:tag.
2025-10-31 16:07:34 +01:00
Jaroslava Fiedlerova
aff3c9872f CI: align REGISTRY env var with updated image path format
Following the change to use:
  image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
the REGISTRY variable must now include the trailing slash.
2025-10-31 15:20:34 +01:00
Nick Hedberg
e4812c3d8e Allow for null-string REGISTRY names 2025-10-31 15:20:20 +01:00
Robert Schmidt
d4045fd87d Merge remote-tracking branch 'origin/clarifiyWhitespace' into integration_2025_w44 (!3727)
Clarify whitespace
2025-10-31 11:33:07 +01:00
Nick Hedberg
330c4fce5d Fix capitalization 2025-10-31 11:31:54 +01:00
Nick Hedberg
e6b307bf6e Indent correctly 2025-10-31 11:31:42 +01:00
Robert Schmidt
a8de9733e6 Merge remote-tracking branch 'origin/refactor-dlsch' into integration_2025_w44 (!3682)
Refactor DLSCH scheduler

Refactor the DLSCH post processor similarly to what has been done in
!3521  with the goal of saving an additional iteration through all UEs,
hopefully making the DLSCH scheduler faster.

It further includes changes to make working with and debugging multi-UE
operation easier:

- add some measurements in L1 (for total TX/RX time)
- a new option MACRLCs.[0].stats_max_ue to limit the number of UEs in
  the periodic output (default: 8, 0=disable)
- avoid stack overflow in the MAC
- fix the writing of stats to nrMAC_stats.log and nrL1_stats.log when
  the written output reduces by truncating the files
- avoid to schedule retransmission with 0 RBs.
2025-10-30 23:14:08 +01:00
Robert Schmidt
9449f777cc Remove TBS table and recompute on demand 2025-10-30 23:13:53 +01:00
Robert Schmidt
916455f027 Move update_dlsch_buffer() into pf_dl()
This slightly speeds up the scheduler (it e.g., does not need to check
for UEs that have retransmissions), and harmonizes with pf_ul(), which
evaluates (UL) BSR at a similar place within the scheduler.
2025-10-30 23:13:53 +01:00
Robert Schmidt
24399eac2d update_dlsch_buffer() for individual UEs 2025-10-30 23:13:53 +01:00
Robert Schmidt
27a022d6f8 Fix: avoid retransmission with 0 RBs
Check and return, if necessary, that we have enough resources to make
retransmissions. Without, we can asserts in L1, such as

    Assertion (NPRB>0 && (NPRB + RBstart <= BWPsize)) failed!
    In PRBalloc_to_locationandbandwidth0() openairinterface5g/common/utils/nr/nr_common.c:506
    Illegal NPRB/RBstart Configuration (0,51) for BWPsize 51

which indicates that the scheduler requested a transmission with 0 PRBs,
which does not make sense.
2025-10-30 23:13:46 +01:00
Robert Schmidt
1fd3c284f1 Merge remote-tracking branch 'origin/rework-gnb-prach-mem-management' into integration_2025_w44 (!3592)
Refactor PRACH handling at the gNB

- Remove race conditions by correctly setting mutexes
- Fix a bug when having multiple RACH occasions
- Reduce memory footprint by removing global memory, which should also
  fix potential memory data races in FHI 7.2
- Additional fixes, see commit messages
2025-10-30 23:12:09 +01:00
Laurent THOMAS
9ce9c16e36 Add documentation on PRACH processing 2025-10-30 23:01:06 +01:00
Laurent THOMAS
d8d1520580 reduce sl_ahead to catch the RACH Msg1 in time in 24PRB test
a bit difficult to understand: sl_ahead=6 => we systematically miss the
rach detection in the scheduler because the scheduler runs more than 6
slots ahead the rx slot processing (here > 11 slots because 6 (DL and UL
slots) + 4 (RU_RX_SLOT_DEPTH, so UL only))

so, reducing sl_ahead works better than large sl_ahead because the idea
behind is: the scheduler of slot+sl_ahead will never create work to do
in a UL slot before slot+sl_ahead+X (as minimum k2 is X, in the 24PRB CI
test: 6)
2025-10-30 23:01:06 +01:00
Laurent THOMAS
0d083d83fc Simplify code through lookup of PDU name, delete commented code 2025-10-30 23:01:06 +01:00
Laurent THOMAS
80223d36d5 Rename nr_fill_prach to nr_schedule_rx_prach() 2025-10-30 23:01:06 +01:00
Laurent THOMAS
1292cd68b7 Remove the usage of global mem for rach rx process
saves about 600MB of memory allocation

Move the definition of PRACH items and the PRACH list to the
defs_nr_commons.h file.

Do not re-write the entire structure in nr_schedule_rx_prach(), as it is
quite large now.
2025-10-30 23:01:06 +01:00
Robert Schmidt
67ba4f6741 evaluate_cqi_report(): Add LOG_D for reported CQI 2025-10-30 19:14:07 +01:00
Robert Schmidt
924f28ed70 Refactor to call post-processor in place
Call the post-processor when the allocation is "fixed" (i.e., nothing
changes anymore), instead of having a final loop across all UEs that
might potentially be costly.

In order to calculate the PF metric, note that the statistics "reset" is
moved into pf_dl() instead of the post-processing loop, as it has to be
done on each slot.

See also: dd98030202 ("Refactor to call post-processor in place")
2025-10-30 19:14:06 +01:00
Robert Schmidt
4eb43f2c45 nr_dlsim_preprocessor(): Refactor NR_sched_pdsch usage
Similarly to parent commit(s), assign sched_pdsch in a single place
instead of relying on sched_ctrl. In a follow-up commit, the
post-processor will be called in a single place.
2025-10-30 19:14:06 +01:00
Robert Schmidt
1900edb56d schedule_control_sib1(): Refactor NR_sched_pdsch usage
Similarly to parent commit(s), refactor the use of NR_sched_pdsch.
Instead of using nr_mac->sched_ctrlCommon, put the NR_sched_pdsch_t on
the stack.

This also refactors update_rb_mcs_tbs() to update the existing
NR_sched_pdsch instead of updating individual fields.

This also reduces the extend to which sched_ctrlCommon is used.
2025-10-30 19:14:06 +01:00
Robert Schmidt
8205503496 nr_preprocessor_phytest(): Refactor NR_sched_pdsch usage
As in parent commit(s).
2025-10-30 19:14:06 +01:00
Robert Schmidt
d4dc044d2d pf_dl(): refactor NR_pdsch_sched usage
As in parent commit.
2025-10-30 19:14:06 +01:00
Robert Schmidt
2daa1dac18 allocate_dl_retransmission(): refactor NR_sched_pdsch usage
Assign NR_sched_pdsch to sched_ctrl->sched_pdsch in one place, where the
post-processing functionality will be called in a follow-up commit. This
should result in no functional change.
2025-10-30 19:14:06 +01:00
Robert Schmidt
761a70d199 Remove use of curInfo in allocate_dl_retransmission()
It seems to be assumed that curInfo actually has the currently active
number of layers/PMI. However, I am not sure this would always be true
(e.g., UE might not have been scheduled for some slots, but number of
layers decreased as reported by CSI).  Instead, recalculate the info
from scratch when necessary.
2025-10-30 19:14:06 +01:00
Robert Schmidt
a6d16a66d2 Reduce scope of NR_sched_pdsch in first DL sched loop
We don't need NR_sched_pdsch here. Remove the use of it.
2025-10-30 19:14:06 +01:00
Robert Schmidt
1622724384 Store selected MCS in UE iterator
PF uses MCS and average throughput to decide which UE to schedule. Thus,
the first loop decides on MCS, whereas the second does the "main UE
allocation" after sorting by the PF metric.

A follow-up commit will remove sched_pusch from NR_UE_sched_ctrl_t.
Thus, we cannot rely on sched_ctrl to store the MCS in the first loop,
and look it up from there in the second. Instead, store it as part of
the UE iterator data, and take it from there.

See also: f3068caa37 ("Store selected MCS in UE iterator", for UL)
2025-10-30 19:14:06 +01:00
Robert Schmidt
1a752a8433 Remove unused/write-only code 2025-10-30 19:14:06 +01:00
Robert Schmidt
ce744fd24f Refactor DLSCH post processor into post_process_dlsch()
Introduce a struct with information on FAPI structures to save resource
and data allocation into. It's in nr_mac_gNB.h because the next commits
will reuse this for all preprocessors.
2025-10-30 19:14:06 +01:00
Robert Schmidt
2f636037ee Fixup: compute_PDU_length() 2025-10-30 19:14:06 +01:00
Robert Schmidt
09e1e6c6fd Rewrite NR_MAC UE_iterator() to limit variable scope
Especially in pf_dl()/pf_ul(), we use a first loop using
UE_iterator(), then iterate over a subset of UEs. It has happened a
couple of times that I was using variable "UE" (from the iterator), when
it should only be used in the first UE_iterator() loop.

Rewrite UE_iterator() to effectively limit the scope of the iterator
variables to the body of the UE_iterator. This should also make it
possible to reuse multiple UE_iterator()s with the same variables in
sequence.
2025-10-30 19:14:06 +01:00
Jaroslava Fiedlerova
773359851c Merge remote-tracking branch 'origin/ci-iperf3-fix' into integration_2025_w44 (!3731)
CI: ensure clean iperf3 server startup

- Resolves issue with iperf3 test failure in RFSim5G multiue test
- Minor fix of iperf3 test descriptions in RFSim5G pipeline
2025-10-30 17:51:46 +01:00
Jaroslava Fiedlerova
314ddcebdd Merge remote-tracking branch 'origin/nrUE_no_CSI_report' into integration_2025_w44 (!3728)
Fix for scenario with no CSI report configured for CSI-RS

After changes in !3714 (merged), if we select to measure RSRP on SSB and not
CSI-RS (default option) and there is a single antenna port (so no MIMO report
either) we won't schedule any CSI-RS measurements for the UE. In that case
ideally we shouldn't set do_CSIRS = 1  in configuration file but still the
option is possible. So the fix is to not perform any measurements at UE on
that CSI-RS but not asserting.

Closes #1015
2025-10-30 17:50:36 +01:00
Jaroslava Fiedlerova
32889870b3 CI: Adjust attenutation for HO setup 2025-10-30 13:37:15 +01:00
Laurent THOMAS
fff95cc075 Refactor rx_nr_prach 2025-10-30 11:54:44 +01:00
Laurent THOMAS
d745e6fcd3 Make the decidated structure the PRACH decoding values contextual
The function rx_nr_prach become autonomous, it doesn't read anymore global variables
So, it can become (later) a threadpool work, that will send a message when it finishes
rx_nr_prach_ru() still use some global variables, but it is executed in sequence, inside the ru main loop, that limits the probability of race conditions
2025-10-30 11:54:43 +01:00
Laurent THOMAS
4f39ba8f51 create a trace group for nr rach 2025-10-30 11:54:41 +01:00
Laurent THOMAS
180f83d196 Refactor L1_nr_prach_procedures 2025-10-30 11:54:40 +01:00
Laurent THOMAS
d24e010367 simplify computation of ru->prach_rxsigF[prachOccasion][aa] 2025-10-30 11:54:36 +01:00
Laurent THOMAS
c48e0b1a32 merge variants of prach_item_t as this is the same in gNB and RU 2025-10-30 11:54:33 +01:00
Laurent THOMAS
d005336cb8 Simplify PRACH beam handling, remove race
Simplify by removing a small malloc and memcpy() the beams. This should
also remove the data race between ru and gNB/CU-DU
2025-10-30 11:54:30 +01:00
Laurent THOMAS
cffb07d798 remove permanent prach rxsigF in gNB and simplify the data structure 2025-10-30 11:54:22 +01:00
Laurent THOMAS
4dd340b6bb merge almost duplicated code for ru prach list and gNB prach list
(gNB is not the proper name, it is CU+DU, gNB is RU+CU+DU)
2025-10-30 11:54:21 +01:00
Laurent THOMAS
88cecd707b regroup similar lists for "ru" and "gNB" in a common definition
Merge the identical sizes. Use correct naming: it is a element of a
list, not a list
2025-10-30 11:54:20 +01:00
Laurent THOMAS
a4d3eb9fad replace fix array index by pointers for prach lists in gNB 2025-10-30 11:54:18 +01:00
Laurent THOMAS
f5c1d18638 Fix bug in "freeing" prach occasions scheduler after decoding first occasion
Release PRACH only after treating the entire PRACH slot/work. Also,
release only once, not on every decoding occasion.
2025-10-30 11:54:14 +01:00
Laurent THOMAS
a07c03e65f MAC: use pointers, rewrite FAPI PDU alloc 2025-10-30 11:54:13 +01:00
Laurent THOMAS
7d90d9b23e log: make input parameters const 2025-10-30 11:54:11 +01:00
Laurent THOMAS
f11361343c add management of nb tx antennas=0 in rfsimulator code
trace the error of 0 antennas, and avoid infinite loop of calls to read
0 bytes
2025-10-30 11:54:09 +01:00
Laurent THOMAS
9ddb8c0b9f Remove prach_ifft from premanent allocation
Allocate on the stack when necessary.
2025-10-30 11:54:01 +01:00
Laurent THOMAS
e54738c7e4 flush command line printf, it is called before log module initialisation 2025-10-30 11:53:57 +01:00
Laurent THOMAS
7157d4bcd1 add trace when the main NR UE thread ends and when NR UE sets oai_exit variable 2025-10-30 11:53:46 +01:00
Jaroslava Fiedlerova
9be94881a3 CI: correct testcase description in RFSim5G tests 2025-10-30 10:32:59 +00:00
Jaroslava Fiedlerova
3e23c796c9 CI: ensure clean iperf3 server startup by killing existing processes on same port
Before starting a new iperf3 server instance in CI tests, explicitly kill any existing
iperf3 processes bound to the same port. This prevents conflicts or failures caused by
leftover iperf3 servers from previous runs that did not terminate properly or on time.
The cleanup is performed using `pkill` before launching the new server.
2025-10-30 10:32:54 +00:00
Jaroslava Fiedlerova
2196fb918a Merge remote-tracking branch 'origin/issue1014' into integration_2025_w44 (!3726)
fix for CSI payload sizes in PUCCH structure at UE

Closes #1014
2025-10-30 10:43:27 +01:00
Jaroslava Fiedlerova
e9723149f4 Merge remote-tracking branch 'origin/gtp-e1-fix-errors-test' into integration_2025_w44 (!3725)
Handle GTP receiver errors, fix memory leaks, add CU-UP test

- Fix use-after-free bugs in GTP by properly stopping the receive thread(s)
- Fix a bug from !3519 (merged): QFI 0 is a valid QFI
- Fix multiple memory leaks in CU-UP, E1, CU-UP load tester, SCTP
- Add a (conservative) functional CU-UP test that verifies that the load tester
  and CU-UP work. Test only a low throughput, as it will run in parallel with
  other tests.
2025-10-30 10:41:47 +01:00
Robert Schmidt
eced5afdf7 Add CU-UP functional test to ctest
Use the CU-UP load tester to test the functionality of the CU-UP and
its loader tester. The requirements on this load test are intentionally
low, as it will be run with other unit tests in parallel, and should
still pass.

It uses an existing configuration file for the CU-UP. The test script
runs the CU-UP, runs the load tester, stops the CU-UP, and returns the
load tester return value as test result (which will be 0=success if all
packets have been received).
2025-10-30 08:04:39 +01:00
Robert Schmidt
e9bf6344b0 SCTP: fix a memory leak
call freeaddrinfo() before return'ing from the function.
2025-10-30 08:04:39 +01:00
Robert Schmidt
a2b127f643 CU-UP: fix direct memory leak
Note that this strdup has been intentioally created for debugging
purposes in core files.

See also: 1ab3b8dd8e ("add version signature in core files...")
2025-10-30 08:04:39 +01:00
Robert Schmidt
155ee5ad42 Fix direct memory leak on E1 message reception
Direct leak of 8 byte(s) in 1 object(s) allocated from:
        #0 0x7f7bc7ee68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x0000004abfa6 in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
        #2 0x0000004abfa6 in decode_e1ap_cuup_setup_request /home/richie/oai/openair2/E1AP/lib/e1ap_interface_management.c:219
        #3 0x00000046a9f5 in e1apCUCP_handle_SETUP_REQUEST /home/richie/oai/openair2/E1AP/e1ap.c:187
        #4 0x000000470b35 in e1ap_handle_message /home/richie/oai/openair2/E1AP/e1ap.c:109
        #5 0x000000470b35 in e1_task_handle_sctp_data_ind /home/richie/oai/openair2/E1AP/e1ap.c:120
        #6 0x00000047717b in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:832
        #7 0x7f7bc7e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)

    Direct leak of 8 byte(s) in 1 object(s) allocated from:
        #0 0x7f7bc7ee68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x0000004ac30c in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
        #2 0x0000004ac30c in decode_e1ap_cuup_setup_request /home/richie/oai/openair2/E1AP/lib/e1ap_interface_management.c:194
        #3 0x00000046a9f5 in e1apCUCP_handle_SETUP_REQUEST /home/richie/oai/openair2/E1AP/e1ap.c:187
        #4 0x000000470b35 in e1ap_handle_message /home/richie/oai/openair2/E1AP/e1ap.c:109
        #5 0x000000470b35 in e1_task_handle_sctp_data_ind /home/richie/oai/openair2/E1AP/e1ap.c:120
        #6 0x00000047717b in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:832
        #7 0x7f7bc7e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
2025-10-30 08:04:39 +01:00
Robert Schmidt
eee9c4cf33 Fix two direct memory leaks of CU-UP tester
Direct leak of 100 byte(s) in 1 object(s) allocated from:
        #0 0x7f6585ee6f2b in malloc (/lib64/libasan.so.8+0xe6f2b) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x000000414a0d in malloc_or_fail /home/richie/oai/common/utils/utils.h:86
        #2 0x0000004061c9 in main /home/richie/oai/tests/nr-cuup/nr-cuup-load-test.c:544
        #3 0x7f6585211574 in __libc_start_call_main (/lib64/libc.so.6+0x3574) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
        #4 0x7f6585211627 in __libc_start_main@GLIBC_2.2.5 (/lib64/libc.so.6+0x3627) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
        #5 0x000000413034 in _start (/home/richie/oai/build/tests/nr-cuup/nr-cuup-load-test+0x413034) (BuildId: 8af0132792b03fa12ba95b5623865c9a8a5625a3)

    Direct leak of 100 byte(s) in 1 object(s) allocated from:
        #0 0x7f6585ee6f2b in malloc (/lib64/libasan.so.8+0xe6f2b) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x000000414a0d in malloc_or_fail /home/richie/oai/common/utils/utils.h:86
        #2 0x0000004061ff in main /home/richie/oai/tests/nr-cuup/nr-cuup-load-test.c:546
        #3 0x7f6585211574 in __libc_start_call_main (/lib64/libc.so.6+0x3574) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
        #4 0x7f6585211627 in __libc_start_main@GLIBC_2.2.5 (/lib64/libc.so.6+0x3627) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
        #5 0x000000413034 in _start (/home/richie/oai/build/tests/nr-cuup/nr-cuup-load-test+0x413034) (BuildId: 8af0132792b03fa12ba95b5623865c9a8a5625a3)
2025-10-30 08:04:39 +01:00
Robert Schmidt
459e20fe99 E1AP: correctly free entire PDU
Free memory including the "base pointer". Fix two places in which it was
on the stack to harmonize. The only stack variable is in reception of
new E1 messages (e1ap_handle_message()), which uses
ASN_STRUCT_FREE_CONTENTS_ONLY().

This fixes bugs similar to these logs:

    Direct leak of 40 byte(s) in 1 object(s) allocated from:
        #0 0x7f418f4e68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x00000049e367 in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
        #2 0x00000049e367 in encode_e1_bearer_context_release_command /home/richie/oai/openair2/E1AP/lib/e1ap_bearer_context_management.c:1235
        #3 0x000000482951 in e1apCUCP_send_BEARER_CONTEXT_RELEASE_COMMAND /home/richie/oai/openair2/E1AP/e1ap.c:546
        #4 0x000000482951 in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:856
        #5 0x7f418f428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)

    Direct leak of 40 byte(s) in 1 object(s) allocated from:
        #0 0x7f418f4e68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x00000049380a in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
        #2 0x00000049380a in encode_E1_bearer_context_setup_request /home/richie/oai/openair2/E1AP/lib/e1ap_bearer_context_management.c:578
        #3 0x00000047f6a2 in e1apCUCP_send_BEARER_CONTEXT_SETUP_REQUEST /home/richie/oai/openair2/E1AP/e1ap.c:378
        #4 0x0000004829f8 in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:846
        #5 0x7f418f428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)

    Direct leak of 40 byte(s) in 1 object(s) allocated from:
        #0 0x7f418f4e68a3 in calloc (/lib64/libasan.so.8+0xe68a3) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x00000046ede7 in calloc_or_fail /home/richie/oai/common/utils/utils.h:74
        #2 0x00000046ede7 in encode_e1ap_cuup_setup_response /home/richie/oai/openair2/E1AP/lib/e1ap_interface_management.c:305
        #3 0x00000047e412 in e1ap_send_SETUP_RESPONSE /home/richie/oai/openair2/E1AP/e1ap.c:167
        #4 0x000000482a68 in E1AP_CUCP_task /home/richie/oai/openair2/E1AP/e1ap.c:836
        #5 0x7f418f428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
2025-10-30 08:04:39 +01:00
Guido Casati
a416db39ba Pass SDAP config by pointer
sdap_config_t is more than 1kB large. Avoid excessive copying by passing
it by reference.
2025-10-30 08:04:39 +01:00
Robert Schmidt
91b3ca77f6 QFI 0 is a valid QFI
QFI 0 is a valid QFI: don't check for qfi <= 0, as uint8 cannot be
negative. Also, correctly use SDAP_MAP_RULE_EMPTY for a DRB ID (which
need to be larger than 0).
2025-10-30 08:03:17 +01:00
Robert Schmidt
10bda84176 Limit statistics of UE to configurable threshold
The gNB will stop the periodical logging of UEs in MAC Info level after
a configurable number of UEs have been printed, by default 8.

Set it to 17 in some CI tests to ensure we still get all UEs for the
time being, as the CI might depend on this.
2025-10-29 19:15:49 +01:00
francescomani
5e32eb67f6 remove unnecessary do_CSIRS from CI config files 2025-10-29 11:02:19 +01:00
francescomani
e57789adb2 prevent assertion in case of no measurements configured for CSI-RS at UE 2025-10-29 10:52:39 +01:00
Robert Schmidt
93cadc9d63 Truncate nrL1_stats.log before writing
Without this, the remainder of the file remains in place, and this can
be confusing if the total file size reduces.
2025-10-29 08:11:50 +01:00
Jaroslava Fiedlerova
4215a12aa9 Merge remote-tracking branch 'origin/dmrs_log_improv' into integration_2025_w44 (!3721)
improvements in formatting and LOGs in DMRS common functions at MAC

DMRS LOGs at MAC were misleading. This MR tried to improve them (and also
adds some formatting fix).
2025-10-28 23:04:02 +01:00
francescomani
6549acdba9 fix for CSI payload sizes in PUCCH structure at UE 2025-10-28 18:06:39 +01:00
Robert Schmidt
48faffc131 dump_mac_stats(): avoid overflow
The call to snprintf() as was used is wrong: we use the return value to
advance output, but the man page says

> The functions snprintf() and vsnprintf() do not write more than size
> bytes (including the terminating null byte ('\0')).  If the output was
> truncated due  to this  limit,  then  the return value is the number of
> characters (excluding the terminating null byte) which would have been
> written to  the  final  string  if enough  space  had  been available.
> Thus, a return value of size or more means that the output was
> truncated.

Thus, output could go beyond end, and we get a stack overflow. Instead,
encapsulate the call to snprintf() checking this condition, and only
advancing output as intended, limiting to 0 if we are at the end of the
buffer.  This avoids this error:

    ==964825==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7be799f51988 at pc 0x7fe7d66b0d39 bp 0x7be79b825ef0 sp 0x7be79b8256c0
    WRITE of size 3 at 0x7be799f51988 thread T24
        #0 0x7fe7d66b0d38 in vsnprintf (/lib64/libasan.so.8+0xb0d38) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x7fe7d66b2d44 in snprintf (/lib64/libasan.so.8+0xb2d44) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #2 0x0000008fe7c6 in dump_mac_stats /home/richie/w/refactor-dlsch/openair2/LAYER2/NR_MAC_gNB/main.c:183
        #3 0x00000092071a in gNB_dlsch_ulsch_scheduler /home/richie/w/refactor-dlsch/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c:200
        #4 0x0000008f8f78 in run_scheduler_monolithic /home/richie/w/refactor-dlsch/openair2/NR_PHY_INTERFACE/NR_IF_Module.c:399
2025-10-28 14:25:50 +01:00
Robert Schmidt
7df8243a2e Remove NR MAC's UE-specific lock
There is the (global) sched_lock that prevents concurrent access. A
dedicated UE lock does not make sense in that case. Worse, this lock
does not prevent all concurrent UE accesses (e.g., there are many loops
over UEs that are not protected), so it's also wrong.
2025-10-28 14:22:24 +01:00
Robert Schmidt
07f06f8c06 nrMAC_stats.log: handle file errors, add truncate to reset file
truncate resets the file size to 0. Without this, e.g., when
disconnecting a UE, the old UE remains at the end and is not
overwritten, which is confusing.
2025-10-28 14:22:24 +01:00
Robert Schmidt
7e8245c412 nrMAC_stats.log thread: correctly lock scheduler for stats 2025-10-28 14:22:24 +01:00
Robert Schmidt
9b97fd9b62 Measure tx_func()/rx_func() job duration 2025-10-28 14:22:24 +01:00
Robert Schmidt
e40ccbb535 Stop GTP receiver thread on exit
Stop the receive thread before closing the socket, which avoids an error
message when stopping the GTP softmodem:

    [GTPU]   [91] Recvfrom failed (Bad file descriptor)
    [GTPU]   exiting thread
2025-10-27 16:50:00 +01:00
Robert Schmidt
b67c639688 Handle GTP receiver errors
On error, exit the GTP thread after printing a diagnostic message. This
avoids also an error flagged by address sanitizer for use-after-free.

    [GTPU]   [91] Recvfrom failed (Bad file descriptor)
    =================================================================
    ==285377==ERROR: AddressSanitizer: heap-use-after-free on address 0x7cd7b7fe5590 at pc 0x0000006a9e18 bp 0x7b97ad4e1d50 sp 0x7b97ad4e1d48
    READ of size 4 at 0x7cd7b7fe5590 thread T8

    =================================================================
    ==285377==ERROR: LeakSanitizer: detected memory leaks

    Direct leak of 160 byte(s) in 1 object(s) allocated from:
        #0 0x0000006a9e17 in gtpv1uReceiver /home/richie/oai/openair3/ocp-gtpu/gtp_itf.cpp:1346
        #1 0x7f97b9a28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #2 0x7f97b8e7ff53 in start_thread (/lib64/libc.so.6+0x71f53) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)
        #3 0x7f97b8f0332b in __clone3 (/lib64/libc.so.6+0xf532b) (BuildId: 48c4b9b1efb1df15da8e787f489128bf31893317)

        #0 0x7f97b9ae60cb in memalign (/lib64/libasan.so.8+0xe60cb) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)
        #1 0x000000471039 in newNotifiedFIFO_elt /home/richie/oai/common/utils/threadPool/notified_fifo.h:75
        #2 0x000000471039 in tx_func /home/richie/oai/executables/nr-gnb.c:107
        #3 0x000000471039 in L1_tx_thread /home/richie/oai/executables/nr-gnb.c:167
        #4 0x7f97b9a28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 10b8ccd49f75c21babf1d7abe51bb63589d8471f)

    0x7cd7b7fe5590 is located 336 bytes inside of 400-byte region [0x7cd7b7fe5440,0x7cd7b7fe55d0)
    freed by thread T0 here:
    SUMMARY: AddressSanitizer: 160 byte(s) leaked in 1 allocation(s).
2025-10-27 16:49:16 +01:00
francescomani
f2389987d4 improvements in formatting and LOGs in DMRS common functions at MAC 2025-10-27 14:26:58 +01:00
Robert Schmidt
75a68167ea Merge branch 'integration_2025_w43' into 'develop'
Integration: `2025.w43`

* !3605 Support beam index in OAI 7.2 Fronthaul Interface
* !3709 Fixes for T-Tracer to work with NR-UE
* !3712 Restore UE Capability IE after RRCReestablishment
* !3716 Remove unused ULSCH measurements at gNB
* !3603 UE symbol based PDCCH receiver
* !3708 Add monolithic N2 handover test pipeline with B210 and Quectel
* !3719 Remove Benetel-specific radio drivers
* !3710 [CI] Update the Push to DockerHub Stage
* !3711 CI: Multiple adjustments
* !3717 Initialize NCC=0 on NGAP Initial Context Setup (3GPP TS 33.501 §6.9.2.1.1)
* !3720 fix direct bugs of not used RU_RX_SLOT_DEPTH defined constant
* !3714 Improve handling of selection of RSRP/SINR report via configuration file
* !3519 Refactor SDAP adaptation work for QoS
* !3698 Other CSI measurement fixes
* !3699 Updates for Feature Set

Closes #1008

See merge request oai/openairinterface5g!3713
2025-10-24 15:39:07 +00:00
Robert Schmidt
1251c44ae8 Merge remote-tracking branch 'origin/updates-feature-set' into integration_2025_w43 (!3699)
Updates for Feature Set
2025-10-24 16:48:17 +02:00
Robert Schmidt
41ce595461 Update supported bandwiths 2025-10-24 15:11:36 +02:00
Thomas Schlichter
a898c18ddc Update NTN in Feature Set 2025-10-24 15:11:36 +02:00
Guido Casati
23c115dc74 Update NAS and mobility in Feature Set 2025-10-24 15:11:36 +02:00
Robert Schmidt
57e382ccd1 Retroactively add release notes for v2.3.0
I forgot to add this when making the release. Put it retroactively to
have things "in order".

See also:
https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.3.0
https://gitlab.eurecom.fr/oai/openairinterface5g/-/releases/v2.3.0
2025-10-24 15:11:36 +02:00
francescomani
66d8ada982 Update UE feature set 2025-10-24 15:11:36 +02:00
Robert Schmidt
110f5c7304 Updates for Feature Set 2025-10-24 15:11:36 +02:00
Robert Schmidt
ef4e37d35c Merge remote-tracking branch 'origin/fix_ue_csi_meas' into integration_2025_w43 (!3698)
Other CSI measurement fixes

Errors fixed in this MR:

- UE currently sends empty CSI measurement report resulting in invalid
  cqi_idx 0, default to MCS 9 at gNB because mismanagement of new L1
  measurement structure at MAC UE
- nrofReportedRS not updated after UE capability reception at gNB
- multiple RSRP reports multiplexed / de-multiplexed in wrong order
2025-10-24 14:42:06 +02:00
Robert Schmidt
35a450bd43 Merge remote-tracking branch 'origin/sdap-qos-improvements' into integration_2025_w43 (!3519)
Refactor SDAP adaptation work for QoS

This MR is an adaptation of the code introduced in !2703.

The goal is a cleanup and functional refactor of the SDAP/PDCP
integration, that is:

- centralize SDAP configuration logic
- simplify entity creation
- improve robustness of role-based SDAP handling
- prepare the codebase for clean support of DRB reconfiguration and
  teardown flows

More concretely:

1. New sdap_config_t and get_sdap_Config()

  - Introduced an internal struct sdap_config_t to abstract SDAP config
    input
  - Centralized SDAP config parsing into new get_sdap_Config() function
    that translates ASN.1 NR_SDAP_Config into this internal
    representation. This is called during RRC triggered
    (re)configuration procedures.
  - Enable mapping of number of QoS flows > 1

2. Unified role handling with bitmasks

  - Added a bitmask-based entity_role field to track SDAP directions:
    SDAP_UL_RX, SDAP_UL_TX, SDAP_DL_RX, SDAP_DL_TX: header presence was
    determined by simple direction (UE vs gNB) and individual
    is_sdap_rx/tx() checks, however nr_sdap_rx_entity behaves
    differently depending on the direction of the RX entity (DL/UL),
    therefore this change can help enable a more accurate SDAP header
    handling across directions and node types.
  - Replaces old helpers is_sdap_rx() / is_sdap_tx() with internal
    checks against the role bitfield
  - QFI-to-DRB mapping is now annotated with direction for both data and
    control PDUs

3. Simplified DRB and SDAP setup

  - add_drb() in PDCP API now delegates SDAP config processing cleanly
  - new_nr_sdap_entity() is used consistently to register a fresh SDAP
    context for the UE and PDU session.
    - Also, re-use and reconfigure existing SDAP entity if already
      exists.
  - logging has been added to trace mapped QFIs from RRC and resulting
    table entries

4. Improved QFI-to-DRB management

  - Refactored nr_sdap_qfi2drb_map_update() to register QFIs based on
    parsed config
  - Ensures control PDUs are correctly routed even after reconfiguration
  - Extended nr_sdap_ue_qfi2drb_config: perform UL QoS flow to DRB
    mapping configuration for a SDAP entity has already been established
    according to TS 37.324, 5.3 QoS flow to DRB Mapping, 5.3.1
    Configuration Procedures. Handle both UL QoS Flows mapping rules to
    add and to remove. QFIs will now be properly unmapped if specified
    via mappedQoS_FlowsToRelease, this might prevent stale QFI mappings
    from being used incorrectly.
  - nr_sdap_qfi2drb() and sdap_map_ctrl_pdu() now strictly fallback to
    default_drb only if a QFI mapping is missing. Missing default DRB
    now triggers LOG_E() (previously silent or misrouted to DRB 0).

5. Other cleanup

  - Remove dependencies from legacy rb_id_t
2025-10-24 14:31:00 +02:00
Robert Schmidt
b7ed2583ac Merge remote-tracking branch 'origin/improv_config_report' into integration_2025_w43 (!3714)
Improve handling of selection of RSRP/SINR report via configuration file

In current develop, the selection of SSB or CRI RSRP depends on the
do_CSIRS flag being activated. That's not wanted. CRI report for now it
is never handled, while we need SSB RSRP report for beam switching
regardless of CSI-RS configuration.
2025-10-24 14:30:39 +02:00
Guido Casati
27be4e26a9 refactor: improve SDAP entity add/update flow management
This commit refactors the SDAP entity QoS flow to DRB mapping functionality
to improve code organization and enhance maintainability.

Key changes:
- Split nr_sdap_qfi2drb_map_update into focused functions:
  * nr_sdap_add_qos_flows_to_drb: handles QFI addition to DRB
  * nr_sdap_rm_qos_flows_from_drb: handles QFI removal from DRB
  * nr_sdap_ue_control_pdu_config: handles UE control PDU generation
- Consolidate add/modify logic into reusable nr_sdap_addmod_entity function
- Remove entity existence checking and updating from new_nr_sdap_entity:
  this function should only add SDAP entities
- Improve function separation of concerns: do SDAP entity add or update
  separately and improve modularity by splitting operations in self
  contained functions
- At SDAP creation, do only add of QFI to DRB mapping
- rename new_nr_sdap_entity to nr_sdap_add_entity for function naming consinstency
2025-10-24 11:55:25 +02:00
Guido Casati
04a1acf376 PDCP: rename add_drb to nr_pdcp_add_drb 2025-10-24 11:55:25 +02:00
Guido Casati
0348aa08b9 Remove rb_id parameter from SDAP TX entity - QFI determines DRB mapping
- Remove rb_id parameter from nr_sdap_tx_entity() function signature
- Update tx_entity function pointer
- Remove rb_id parameter from sdap_data_req() function signature
- Remove unused rb_id variable from sdap_tun_read_thread

The rb_id parameter was redundant since SDAP determines DRB ID
from QFI mapping via entity->qfi2drb_map(entity, qfi). This
simplifies the interface.
2025-10-24 11:55:25 +02:00
Guido Casati
d760a16827 SDAP TX: explicit check on qfi2drb_map output
Each QFI should always be mapped to a DRB. If that is not the case, we
have an undefined behavior. This should not occur. This commit prints
an error in tx_entity and returns.
2025-10-24 11:55:25 +02:00
Guido Casati
8207a4c352 SDAP refactoring: replace legacy (LTE) type rb_id_t with int 2025-10-24 11:55:25 +02:00
Guido Casati
823340a2e2 Refactor handling of DL/UL SDAP header in the SDAP entity
The TX/RX entity should have different behavior according to
5.2.1, 5.2.2, 3GPP TS 37.324, depending on whether it is UL and DL.

The gNB can play a role both as UL RX entity and DL TX entity, while
the UE can play a role both as UL TX entity and DL RX entity.

The goal of this commit is to extend the information stored in the
SDAP entity as the current code is just marking the entity as TX/RX.
The commit introduces a bitmap to store the role of the
entity, which can be DL RX, DL TX, UL RX and UL TX. Based on this
the TX SDAP entity knows whether a DL/UL PDU should be build, and
the RX SDAP entity knows whether a DL/UL PDU should be processed.

See also Figure 4.2.2-1.

SDAP headers are present only if enable_sdap option is used.
2025-10-24 11:55:25 +02:00
Guido Casati
3efaafa633 Refactor QFI to DRB mapping logic
nr_sdap_qfi2drb_map_update function pointer should
process QFIs to add and release from the entity mapping, therefore
a new function pointer for QFIs to add was introduced and
the function pointer to release the QFIs was called in the same function.

Now the nr_sdap_qfi2drb_map_update is:
(1) looping through the QFIs to add/update and store in the qfi2drb_table
(2) looping through the QFIs to release and delete from qfi2drb_table

Also:

* Update the function signature to use sdap_config_t and nr_sdap_entity_t
* log error when the update fails
* limit the scope of the function
* clang-formatted
* removed limit on table entries set by AVLBL_DRB, replaced with MAX_DRBS_PER_UE
2025-10-24 11:55:25 +02:00
Guido Casati
bae1de16d6 Refactor SDAP UL: QoS flow to DRB Mapping configuration and end-marker control PDU mapping
The function nr_sdap_ue_qfi2drb_config should do UL QoS flow to DRB mapping configuration
for a SDAP entity has already been established according to TS 37.324, 5.3 QoS flow to
DRB Mapping, 5.3.1 Configuration Procedures. It should handle both mapping rules to add and to remove.

To this purpose:

* Simplify function signature by passing the sdap config.
* Improve readability of the function.
* Move handling of sdap.mappedQFIs2ReleaseCount (in nr_reconfigure_sdap_entity)
  inside the function.
* Simplify end-marker control PDU mapping function by removing unused
  DRB ID input parameter (the function is fetching the DRB ID based on the input
  map type)
* use int instead of legacy rb_id_t
* limit scope of functions whenever necessary
2025-10-24 11:55:25 +02:00
Guido Casati
7376c9545c Refactor nr_sdap_qfi2drb_map
The goal of this function is to return the DRB ID mapped to the input QFI, for both DL and UL.
The function looks up the DRB that is mapped to the QFI, if no mapping rule exists
returns the default DRB. Returns 0 If no mapping and no default DRB exists for that QFI

The function should not update the stored mapping rules, that is done when receiving
a new SDAP configuration. In this function it was removed.

See TS 37.324, 5.2.1 Uplink
> If there is no stored QoS flow to DRB mapping rule for the QoS flow as specified in the subclause 5.3,
> map the SDAP SDU to the default DRB else, map the SDAP SDU to the DRB according to the stored QoS flow to DRB mapping rule.
2025-10-24 11:55:25 +02:00
Guido Casati
7b42a65ac7 Refactor new_nr_sdap_entity to use sdap_config_t and always update mapping rules
* change function signature: pass the sdap_config_t
* update qfi2drb mapping when receiving a configuration for an already existing SDAP entity
* always update mapping rules, not only for default DRB
2025-10-24 11:55:25 +02:00
Guido Casati
68a3a849bc refactor: Use centralized get_sdap_Config in nr_reconfigure_sdap_entity
Replace inline parameter extraction with get_sdap_Config() function call to:
- Eliminate code duplication in SDAP configuration handling
- Streamline QFI release processing with structured config object
- Ensure consistent SDAP configuration extraction across all SDAP operations
2025-10-24 11:55:25 +02:00
Guido Casati
350263460b Refactor processing of sdap_Config in add_drb (PDCP)
* use get_sdap_Config to process sdap_Config
* move SDAP config logic to the scope where it is relevant
* add SDAP entity direcly in RRC, not from PDCP
* replaced nr_pdcp_add_drbs with single add_drb call: it was no longer
  efficient to keep it in the new logic. The addMod list can be looped directly in RRC.
* add specific function to add bearers from addMod list in E1, NSA, and UE
2025-10-24 11:55:25 +02:00
francescomani
747689596a fix SINR report order at UE 2025-10-24 10:58:23 +02:00
francescomani
2d7999cb28 fix order of information when encoding/decoding RSRP meaas report with more than 1 resource 2025-10-24 10:55:54 +02:00
Robert Schmidt
064d2a1ef0 Merge remote-tracking branch 'origin/RU_RX_SLOT_DEPTH-bugs' into integration_2025_w43 (!3720)
fix direct bugs of not used RU_RX_SLOT_DEPTH defined constant

with this commit, the gNB can work if we change RU_RX_SLOT_DEPTH to
another value than 4 but it remain not well designed
2025-10-24 08:20:24 +02:00
Robert Schmidt
e8d36e8af7 Merge remote-tracking branch 'origin/issue-1008' into integration_2025_w43 (!3717)
Initialize NCC=0 on NGAP Initial Context Setup (3GPP TS 33.501 §6.9.2.1.1)

The nhcc should be initialized to 0 upon Initial Context Setup.

Also, remove unused kgnb_ncc: nh_ncc is already there.

Closes #1008
2025-10-24 08:19:55 +02:00
Laurent THOMAS
83fed82bcf fix direct bugs of not used RU_RX_SLOT_DEPTH defined constant
with this commit, the gNB can work if we change RU_RX_SLOT_DEPTH to
another value than 4 but it remain not well designed
2025-10-24 08:11:13 +02:00
Robert Schmidt
574a75472c Merge remote-tracking branch 'origin/ci-test-adjustments' into integration_2025_w43 (!3711)
CI: Multiple adjustments

- Test with DDDSU (mixed: DDDDDDDDDDGGUU) TDD configuration in
  RAN-SA-B200-Module-SABOX-Container - 40 MHz TDD test
  * https://jenkins-oai.eurecom.fr/job/RAN-SA-B200-Module-SABOX-Container/8910/
- Update the node to localhost for RFSim and L2Sim pipelines:
  * https://jenkins-oai.eurecom.fr/job/RAN-RF-Sim-Test-4G/3990/
  * https://jenkins-oai.eurecom.fr/job/RAN-L2-Sim-Test-4G/3056/
  * https://jenkins-oai.eurecom.fr/job/RAN-RF-Sim-Test-5G/10273/
- Remove unused eNB_instance and eNB_serverId entries from XML, replace
  by node
- Remove nssai_sd from UE configuration (default value is used instead)
- Update CI configuration files
2025-10-23 19:20:26 +02:00
Robert Schmidt
bca5939640 Merge remote-tracking branch 'origin/ci-fix-dockerhub-push' into integration_2025_w43 (!3710)
[CI] Update the Push to DockerHub Stage

This MR addresses two cases:

1. Error Handling: Ensures subsequent Image Test Processes stages
   continue to run even if the preceding Push to DockerHub stage fails
   (applies when the condition is PUSH event and doBuild is true).

2. Introduces conditional logic to correctly handle multi-architecture
   images: Images built for both AMD64 and Jetson ARMv8 (oai-gnb,
   oai-nr-ue, oai-nr-cuup) use docker buildx imagetools for push to
   DockerHub.

All other AMD64 images are pushed using standard Docker commands.

Related MR !3691
2025-10-23 19:19:48 +02:00
Robert Schmidt
7c18dfd93a Merge remote-tracking branch 'origin/remove-benetel-radio-drivers' into integration_2025_w43 (!3719)
Remove Benetel-specific radio drivers

These drivers are superseded by the O-RAN 7.2 FHI
2025-10-23 19:19:24 +02:00
Robert Schmidt
f7639e059d Merge remote-tracking branch 'origin/CI-ho-attenuator-N2' into integration_2025_w43 (!3708)
Add monolithic N2 handover test pipeline with B210 and Quectel

The goal of this MR is to provide an automated end-to-end N2 HO
validation with real RF (B210) and Quectel UE.

During the testing phase a post-HO assertion failure due to
uninitialized selected_plmn_identity was found: this was also fixed.

CI: Add monolithic N2 handover test pipeline (B210 + Quectel)

- New XML pipeline for N2 HO testing
- Docker Compose for two monolithic gNBs (gNB1/gNB2)
- Handover sequence: gNB1 → gNB2 → gNB1 with 5s controlled attenuation
  (RC4DAT).
- Channel mapping: ch1-2 gNB1, ch3-4 gNB2
- Telnet server enabled for CI commands
- Clean-up/reset of attenuator state included

NGAP

- fix PLMN/cell location for Initial UE and Uplink NAS
- Prevents assertion in ngap_gNB_nas_uplink() due to uninitialized
  selected_plmn_identity
- Initial UE Message: pass UE-selected PLMN and NR cell ID from RRC to
  NGAP
- Uplink NAS Transport: use PLMN, TAC, and cell ID from the message
- Build NR CGI as gNB ID + cell ID
- Store UE-selected PLMN only in RRC UE context (for later NAS); stop
  storing PLMN in NGAP UE context.
- PLMN validation when processing handover requests from the source gNB:
  when PLMN validation fails, the target gNB now properly sends
  NGAP_HANDOVER_FAILURE
- Store serving PLMN for later use in UE context
2025-10-23 19:18:23 +02:00
Robert Schmidt
fba488056c Merge remote-tracking branch 'origin/ue-symbol-based-receiver' into integration_2025_w43 (!3603)
UE symbol based PDCCH receiver

This is a partial rebase/rewrite of !2895

The goal of this MR is to check how we can merge this.

The eventual result is stated in !2895. The way forward is to modify UE
RX procedures to work symbol by symbol by extracting the symbol loop out
of RX procedures. After all channels are modified this way, the main
thread can be modified to work symbol by symbol.

At this point only PDCCH was modified.
2025-10-23 15:47:28 +02:00
Shubhika Garg
61b5417817 ci: Update and implement conditional DockerHub push
- Push both AMD64 & ARMv8 Jetson images together for images built on both using `docker buildx imagetools`
  - Use standard 'docker pull and push' for images built only on AMD64.
2025-10-23 10:53:41 +02:00
Robert Schmidt
78f36b64c2 use of config module handling for CSI report type input 2025-10-23 10:52:56 +02:00
francescomani
e06d0c7199 improve handling of selection of RSRP/SINR report via configuration file 2025-10-23 10:52:51 +02:00
Robert Schmidt
ece138134b build_oai: remove non-existing oran_fhlib_4g option 2025-10-23 10:03:28 +02:00
Robert Schmidt
8ecda65d55 Remove Benetel radio drivers
These drivers are superseded by the O-RAN 7.2 FHI.
2025-10-23 10:00:08 +02:00
Guido Casati
5f261d4f4c Add PLMN validation for handover requests and store serving PLMN
Prevent assertion in ngap_gNB_nas_uplink() due to uninitialized selected_plmn_identity:
the selected_plmn_identity field was not being set during N2 handover,
causing the assertion ((plmn->mnc_digit_length == 3) || (plmn->mnc_digit_length == 2))
to fail when processing subsequent NAS messages. The issue is that the Serving PLMN
is not stored by RRC. During N2 mobility, RRC can get this info from GUAMI.

When receiving the Handover Request the target gNB knows from GUAMI
which serving PLMN is the AMF belonging to. In current design, allowed PLMNs
are stored in rrc.configuration. The incoming PLMN needs to be validate
against the PLMNs in the list, then stored in the UE context as Serving PLMN.

This change adds PLMN validation when processing handover requests from the source gNB.
The validation is needed because:

- Target gNB must verify that the PLMN from the GUAMI in the handover request
  is allowed by its configuration before accepting the handover to prevent handover
  to unsupported PLMNs.
- When PLMN validation fails, the target gNB now properly sends NGAP_HANDOVER_FAILURE
- UE Context must store serving PLMN for later use
2025-10-22 14:48:34 +02:00
Guido Casati
32eae0a0a8 Adopt plmn_id_t in nr_guami_t 2025-10-22 14:48:34 +02:00
Guido Casati
7ec646a8d2 NGAP: fix PLMN/cell location for InitialUE and UplinkNAS
This commit is removing the storage of selected PLMN in NGAP UE context.
We store the Serving PLMN in the RRC UE context instead.

The Selected PLMN is the PLMN that the UE chose (or was directed to) for registration
and it is sent in the RRCSetupComplete. This is different from the selected
PLMN mentioned in the NG INITIAL UE MESSAGE for network sharing.

Selected PLMN: determines which core network and AMF the UE is registered with
GUAMI = Identifies the serving AMF and includes the PLMN of that AMF
Serving PLMN: the PLMN that is currently serving the UE (e.g. contained in GUAMI)

The AMF’s PLMN may match the selected PLMN, or not (especially in network sharing or roaming).
Regardless, the UE always have a Serving PLMN.

Initial UE message does not have a TAI IE per se, but TAI is a mandatory
member of the mandatory UserLocationInformation CHOICE.
NR CGI is also mandatory and carried inside UserLocationInformation:
in network sharing, the PLMN ID in TAI takes on additional
significance: RAN is shared but CN are different, so in this case PLMN in TAI is
needed for the AMF route the message to the correct operator’s core.

If network sharing applies (e.g., shared RAN between PLMN-A and PLMN-B):
the UE or network may select PLMN-B instead, and that PLMN identity
is included in the Initial UE Message’s TAI IE.

Conclusion:
1) UE always sends the selected PLMN during the registration,
   regardless of whether it is shared or not.
2) Selected PLMN Identity is an actual IE sent in the RRCSetupComplete
   while in NGAP there's no Selected PLMN Identity IE, only PLMN Identity
   IEs in both TAI and NR CGI. It is a subtle difference.
3) The serving PLMN of the UE needs to be stored in RRC UE Context for
   later use in NAS procedures. e.g. at initial registration it matches
   the Selected PLMN
4) No need to store PLMN in NGAP UE Context, params are passed by RRC
5) TAI and NR CGI, which contain the PLMN identity, are mandatory in
   UserLocationInformation IE CHOICE, and should reflect current status

Changes
- Initial UE Message: pass UE-selected PLMN and NR cell id from RRC to NGAP
- Uplink NAS Transport: use PLMN, TAC, and cell id provided by the message;
- Build NR CGI from gNB ID + cell id
- Store UE-selected PLMN only in RRC UE context at NAS_FIRST_REQ for later
  Uplink NAS, stop storing PLMN in NGAP UE context
2025-10-22 14:48:34 +02:00
Guido Casati
c3eaef704f Add monolithic N2 handover test pipeline with B210 and Quectel
- Add XML pipeline for N2 handover testing
- Add Docker compose for two monolithic gNBs
- Features:
  * Two monolithic gNBs (gNB1, gNB2) with proper CU+DU parameters
  * Gradual attenuation control using RC4DAT attenuator (5s duration)
  * N2 handover sequence: gNB1 → gNB2 → gNB1
  * Proper channel mapping: ch1-2 for gNB1, ch3-4 for gNB2
  * Telnet server configuration for CI commands
  * Handover-specific neighbor configuration
  * Clean test state management with attenuator reset
2025-10-22 14:48:34 +02:00
Jaroslava Fiedlerova
918802d189 Merge remote-tracking branch 'origin/remove_ulsch_measurements' into integration_2025_w43 (!3716)
Remove unused ULSCH measurements at gNB
2025-10-22 13:30:45 +02:00
francescomani
e3aa91dec8 remove unused ulsch measurements at gNB 2025-10-22 09:24:54 +02:00
Guido Casati
70d23e43df Fetch sdap configuration from sdap-config and store in new struct sdap_config_t
This function is processing the NR_SDAP_Config_t received (from RRC) and
is storing the SDAP configuration in a structure of type sdap_config_t.
2025-10-21 16:50:44 +02:00
Jaroslava Fiedlerova
a0f58d7104 CI: Update CI conf files
Update based on !3645

Note: For some test configurations we still need to provide
ra_ResponseWindow, for more details, check commit message of
41d14b571c
2025-10-21 15:22:10 +02:00
Jaroslava Fiedlerova
5b5b9b3a30 CI: remove nssai_sd UE config when default value is used
The SD value defaults to 0xffffff (16777215 in decimal) when not explicitly
set on the UE.
2025-10-21 15:02:01 +02:00
francescomani
df3a768811 fix updating nrofReportedRS after reconfiguration 2025-10-21 15:01:42 +02:00
francescomani
48773b8517 fix handling of CSI measurement reports at L2 UE 2025-10-21 15:01:38 +02:00
Sakthivel Velumani
7807016ae6 pdcch: return pdcch processing is no ss configured 2025-10-21 12:03:02 +02:00
Bartosz Podrygajlo
ece9d51db3 Symbol based PDCCH processing
1. Refactor PDCCH PHY functions to take rxdataF of one OFDM symbol and
   produce LLR for each search space. The modified functions take
   rxdataF in a different format than that produced by nr_slot_fep(). So
   for now a memcpy is used to change the array structure. Once
   nr_slot_fep() is modified, this memcpy will no longer be needed and
   will be removed.
2. Modify DCI functions to decode DCI in the last PDCCH symbol and
   inidcate to MAC once.
3. Fix PDCCH monitoring for start symbol > 0.
4. Fix multiple PDCCH monitoring within slot.

Co-authored-by: Sakthivel Velumani <mail@sakthi.me>
2025-10-21 12:03:01 +02:00
Bartosz Podrygajlo
07ce1ed145 Fix reading reading out of bounds in nr_pdcch_extract_rbs_single
Fix reading out of bounds of rxdataF in the middle PRB in case of odd
cell bandwidth.
2025-10-21 12:01:34 +02:00
Bartosz Podrygajlo
dcb69986eb Fix segfault in nr_pdcch_extract_rbs_single
Fixed an issue where skipping unused PDCCH RBGs would cause the
function to write/read from outside the symbol boundary
2025-10-21 12:01:34 +02:00
Bartosz Podrygajlo
22a335b1a8 Fix too large array in UE PDCCH RX 2025-10-21 12:01:34 +02:00
Bartosz Podrygajlo
34052bf0ce Split PBCH and PDCCH processing in NR UE 2025-10-21 12:01:34 +02:00
Bartosz Podrygajlo
e1b06d177e Remove unused parameters from nr_pdcch_dmrs_rx 2025-10-21 12:01:34 +02:00
Sakthivel Velumani
ae690217dd Clean-up nr_slot_fep
1.Create new funtion nr_symbol_fep() to do OFDM demod of one symbol on
  all antennas. This is called by nr_slot_fep() for now. In the
  upcoming MR, this function will be called directly after reading
  each OFDM symbol from the radio.

2.Removed redundant memory alignment. DFT function performs memory
  alignment if the input memory is not aligned.
2025-10-21 12:01:34 +02:00
Robert Schmidt
45499290cf Merge remote-tracking branch 'origin/Restore_ue_capability_after_reest' into integration_2025_w43 (!3712)
Restore UE Capability IE after RRCReestablishment
2025-10-21 09:17:41 +02:00
Robert Schmidt
7a3da4b7a4 Merge remote-tracking branch 'origin/fix-ttracer-nrue' into integration_2025_w43 (!3709)
Fixes for T-Tracer to work with NR-UE

Fixes to align NR UE events with their definitions in T_messages.txt and
match the expected format in the tracer GUI parser.

Also fixes DL SNR to work in tracer GUI.
2025-10-21 09:12:02 +02:00
Robert Schmidt
af37aaee00 Merge remote-tracking branch 'origin/oran_beamforming' into integration_2025_w43 (!3605)
Support beam index in OAI 7.2 Fronthaul Interface

This branch supports beam index in OAI 7.2 Fronthaul Interface.

- For CP DL (PDSCH), nBeamIndex of the corresponding prbMapElm is set
  when sending IQ data in oran_fh_if4p5_south_out. nBeamIndex of the
  corresponding prbMapElm is set when sending IQ data in
  oran_fh_if4p5_south_out.
- For CP UL (PUSCH and PRACH), nBeamIndex of the corresponding prbMapElm
  is set in oran_fh_if4p5_south_out.

In addition, it fixes a couple of issues

- XRAN hardcodes nBeamIndex of PRACH to zero. Modify XRAN to support
  setting of nBeamIndex of PRACH and update xran F release patch.
- Fix the bug in calculating fh_config->neAxc where num_beams_period is
  multiplified twice

Testing methodology: Use Benetel O_RU for testing even though it does
not support beamforming. With successful registration and data transfer,
one could check the pcap on the fronthaul interface to see if CP packets
are with the right beam index.

Results:

1. Verified that CP-packets for SSB, DCI, PDSCH, PRACH, PDSCH, PUSCH,
   CSI-RS and SRS are with the right beam index
2. Verified that there is no side-effect on Benetel O_RU. UE could
   register properly.
3. Verified 4 SSB with ssb_PositionsInBurst_Bitmap = 85. Could see SSB
   and PRACH with 4 different indices.
2025-10-21 09:09:03 +02:00
Mario Joa-Ng
ad1b05cd01 need to set beam_id for UPLINK_SLOT when using analog BF 2025-10-20 17:21:12 +02:00
Mario Joa-Ng
65ef3cfa74 Set RX nBeamIndex according to beam allocation
Handle CP UL packet at xran_fx_tx_send_slot() instead of
xran_fh_rx_read_slot(), as the latter would set this information too
late (on reception on samples, but it needs to be filled in the CP
packet prior to reception).
2025-10-20 17:21:12 +02:00
Mario Joa-Ng
2d27e0fc0a Set TX nBeamIndex according to beam allocation
Initialize ru_info structure with beam information, and set beams on TX
direction. Initialize the number of antennas for both RX/TX in both
cases for completeness.
2025-10-20 17:21:12 +02:00
Mario Joa-Ng
c645e8b096 Fix xran: Correctly read PRACH beam index
Upgrade xran patch, bump version number.
2025-10-20 17:21:12 +02:00
luis_pereira87
f231655b31 Restore UE Capability IE after RRCReestablishment 2025-10-20 15:04:26 +01:00
alexjiao
4d372c5f58 Improve T-Tracer GUI for UE
Make PHY measurements diagrams larger for a better view, reduce PHY/MAC/RLC/PDCP/RRC textlog height
2025-10-17 23:59:58 +08:00
Jaroslava Fiedlerova
c8b09f570f CI: RF-Sim-Test-5G replace node name by localhost
By configuring the Jenkins pythonExecutor to match the test machine, we can use
localhost as the node for running individual test cases. This change makes it
easy to move tests across machines, as the only adjustment needed is updating
the pythonExecutor in Jenkins.
2025-10-17 16:21:12 +02:00
Jaroslava Fiedlerova
2bacf7ba54 CI: RF-Sim-Test-4G replace node name by localhost
By configuring the Jenkins pythonExecutor to match the test machine, we can use
localhost as the node for running individual test cases. This change makes it
easy to move tests across machines, as the only adjustment needed is updating
the pythonExecutor in Jenkins.
2025-10-17 16:20:01 +02:00
Jaroslava Fiedlerova
149c4dbf6e CI: RFSim-5G update XML files
Use node for Create/Deploy/Undeploy() (as done in !3579)
2025-10-17 12:17:15 +02:00
Jaroslava Fiedlerova
867d476397 CI: L2-Sim-Test-4G replace node name by localhost
By configuring the Jenkins pythonExecutor to match the test machine, we can use
localhost as the node for running individual test cases. This change makes it
easy to move tests across machines, as the only adjustment needed is updating
the pythonExecutor in Jenkins.
2025-10-17 11:36:39 +02:00
alexjiao
5df7d000f9 Fix for DL SNR to work in T-Tracer with NR-UE
Add missing T_UE_PHY_DL_TICK and T_UE_PHY_UL_TICK events
Calculate missing n0_power_avg_dB for noise measurements
2025-10-17 17:07:21 +08:00
alexjiao
8424c8ecb6 Fix crashes for T-Tracer to work with NR-UE
1. Fix UE_PHY_PDSCH_IQ event
2. Fix UE_PHY_PDCCH_ENERGY event
3. Fix UE_PHY_PDSCH_ENERGY event
4. Fix UE_PHY_MEAS event
All fixes align NR UE events with their definitions in T_messages.txt and match the expected format in the tracer GUI parser.
2025-10-17 17:06:36 +08:00
Jaroslava Fiedlerova
d0089369d3 CI: adjust TDD pattern in SA-B200 40 MHz TDD test 2025-10-17 10:59:49 +02:00
Shubhika Garg
b0ab5e8795 ci: Ensure DockerHub push failure doesn't halt pipeline
- catchError will prevent from abruptly aborting the entire pipeline upon failure.
  - Removed redundant `currentBuild.result` in post-failure block
2025-10-17 10:28:36 +02:00
Jaroslava Fiedlerova
7045140845 Merge branch 'integration_2025_w42' into 'develop'
Integration `2025.w42`

* !3623 Optimization of PDSCH precoding operation
* !3691 \[CI\] Ensure multi-arch DockerHub Push after successful image build
* !3696 asn1c doesn't follow c99 variables alias rules, it needs to be compiled this...
* !3685 Assign antenna ports correctly for 1 and 2 layers for aerial.
* !3495 Type0 PDSCH frequency allocation at L1 UE
* !3686 Remove NR L2 simulator code from UE
* !3693 Remove B200-specific clock-rate setting
* !3701 OAI UE: add shared RSRP Table 10.1.6.1-1 mapping function to helpers and adopt it RRC UE
* !3662 RRC UE file cleanup
* update doc/README.md
* !3608 use common scale channel functions for DLSCH and ULSCH
* !3694 fix non initialized DMRS port value in case of DCI00 at UE
* !3702 Extend F1 rfsim CI test
* !3704 remove unused global queues, dead code
* !3673 CI: Aerial: Add an UL-heavy pipeline test
* !3651 CI: Upgrade HO setup to use an attenuator
* !3695 CI: Upgrade Aerial setup to 25-2.1

Closes #940

See merge request oai/openairinterface5g!3700
2025-10-16 15:58:02 +00:00
Guido Casati
e4f7443552 Initialize NCC=0 on NGAP Initial Context Setup per 3GPP TS 33.501 §6.9.2.1.1
Remove unused kgnb_ncc: nh_ncc is already there

Closes #1008
2025-10-16 17:21:01 +02:00
Jaroslava Fiedlerova
1f0e9abe2f Merge remote-tracking branch 'origin/aerial_25-2.1' into integration_2025_w42 (!3695)
CI: Upgrade Aerial setup to 25-2.1

The purpose of this MR is to upgrade the cuBB image in the Aerial setup to
release 25-2.1 and update the doc/Aerial_FAPI_Split_Tutorial.md accordingly.
2025-10-16 15:38:49 +02:00
Reem Bahsoun
9620fd1a6a Update the nvIPC library to the one packaged with the new cuBB image. 2025-10-16 12:06:15 +02:00
Jaroslava Fiedlerova
296ae968b1 Merge remote-tracking branch 'origin/aerial-ul-heavy' into integration_2025_w42 (!3673)
CI: Aerial: Add an UL-heavy pipeline test

Add a new test with DSUUU TDD pattern, and try to reach 220Mbps.
2025-10-16 11:55:16 +02:00
Jaroslava Fiedlerova
10555929b0 Merge remote-tracking branch 'origin/CI-ho-attenuator' into integration_2025_w42 (!3651)
CI: Upgrade HO setup to use an attenuator

The goal of this MR is to upgrade HO CI setup to include a digital attenuator
that will allow us to trigger handover by attenuating the signals on the DUs.
2025-10-16 11:52:02 +02:00
Robert Schmidt
5f162c436e Add documentation for CI Handover Setup 2025-10-16 11:40:25 +02:00
Reem Bahsoun
9803fb29f6 Reorganize XML steps for F1 HO
Number linearly for easier navigation in HTML reports, and start DU1
before connecting the UE. Reset attenuation on all channels to 0.
2025-10-16 11:40:25 +02:00
Reem Bahsoun
e2075b57ca Clean up F1 HO config files
Harmonize gNB names with other files, remove control ports (not used),
put sl_ahead in right place.
2025-10-16 09:30:38 +02:00
Reem Bahsoun
d8e9a30fad Add attenuator commands to the XML file 2025-10-16 09:30:31 +02:00
Reem Bahsoun
c9b704ed64 Rename services in docker-compose for clarity
Harmonize with other files and use dashes.
2025-10-16 09:30:18 +02:00
Reem Bahsoun
464762e52b Fix: PCI on different SSB position 2025-10-15 20:14:48 +02:00
Reem Bahsoun
e375a13aa5 CI infra: rename UE name to reflect PLMN 2025-10-15 20:14:48 +02:00
Robert Schmidt
42a54a01a0 USRP: move time/clock source setting to later
Doing this before using set_master_clock_rate() on the B200 seems to
invalidate synchronization setting.

    [HW]   USRP clock set to 1759836386.000000 sec
    [...]
    [HW]   current pps at 3.286750, starting streaming at 4.286750

In other words, the current time setting was reset. With this change
now, we see

    [HW]   USRP clock set to 1759929873.000000 sec
    [...]
    [HW]   current pps at 1759929873.000000, starting streaming at 1759929874.000000

This is because changing clock sources (I assume setting the master
clock rate impacts the clock) can result in changing the time.  From the
documentation of [1]:

> Note: When changing clock sources, a previously set time will most
> likely be lost. It is recommended to set the time after changing the
> clock source. Otherwise, an unexpected time may line up with future PPS
> edges.

[1] https://files.ettus.com/manual/classuhd_1_1usrp_1_1multi__usrp.html#a99254abfa5259b70a020e667eee619b9
2025-10-15 20:06:15 +02:00
Robert Schmidt
0ba9a9758b CI: expand %%workspace%% token
- main.py: replace %%workspace%% with CONTAINERS.eNBSourceCodePath in Custom_Command and Custom_Script

Co-authored-by: Guido Casati <hello@guidocasati.com>
2025-10-15 20:06:15 +02:00
Guido Casati
f93a71977f Add band validation in neighbor cell configuration
- Add band mismatch check in valid_du_in_neighbour_configs function
- Ensures neighbor cell band matches serving cell band
- Prevents invalid neighbor configurations for handover
2025-10-15 20:06:15 +02:00
Robert Schmidt
8c85acbba6 Add script to control attenuation of Mini-Circuits RC*DAT 2025-10-15 20:06:15 +02:00
Robert Schmidt
1a472e4c0b Msg3 retx: check that current slot is DL
The code only checked that Msg3 would be scheduled during UL, but in
some combinations, e.g., with DSUUU, the current slot can very well be
UL as well => we would schedule DCI in UL slot.
2025-10-15 19:52:09 +02:00
Robert Schmidt
7ff05a98c2 Print frame/slot on UL failure 2025-10-15 19:52:09 +02:00
Robert
ae63a51ceb Increase PBCH Block power: better UL 2025-10-15 19:52:09 +02:00
Robert Schmidt
3b517dd5d2 Add CI XML fail for Aerial UL heavy pipeline 2025-10-15 19:52:09 +02:00
Robert
2db630e187 Add UL-heavy Aerial config
Update cuBB image to cubb-build:25-2.1_srs-ul-heavy (release 25-2.1 with
changes in the L1 config to test heavy ul)

Co-authored-by: Reem Bahsoun <reem.bahsoun@openairinterface.org>
2025-10-15 19:51:50 +02:00
Jaroslava Fiedlerova
7ef1e79c0d Merge remote-tracking branch 'origin/remove-unused-fifo-queues' into integration_2025_w42 (!3704)
remove unused global queues, dead code
2025-10-15 13:49:08 +02:00
Robert Schmidt
ad878dc7df Merge remote-tracking branch 'origin/issue-940' into integration_2025_w42 (!3702)
Extend F1 rfsim CI test

Add one handover hop.

Closes #940
2025-10-15 08:35:34 +02:00
Robert Schmidt
6ddd2bd2af Merge remote-tracking branch 'origin/dci_00_dmrs_port' into integration_2025_w42 (!3694)
fix non initialized DMRS port value in case of DCI00 at UE

When transmitted PUSCH is neither scheduled by DCI format 0_1 with CRC
scrambled by C-RNTI, CS-RNTI, SP-CSI-RNTI or MCS-C-RNTI, nor
corresponding to a configured grant, the UE shall use [...] DM-RS port
0.

In UE code it was not set in case of DCI00 and that was leading to ULSCH
failures in some scenarios.
2025-10-15 08:35:11 +02:00
Robert Schmidt
2a67719e92 Merge remote-tracking branch 'origin/common_scale_function' into integration_2025_w42 (!3608)
use common scale channel functions for DLSCH and ULSCH

Follow up of !3035
2025-10-15 08:34:37 +02:00
Robert Schmidt
b9043d990a Doc: correctly link to non-indexed files in doc/README.md 2025-10-15 08:29:41 +02:00
francescomani
38c27680eb Merge remote-tracking branch 'origin/rrcUE_cleanup' into integration_2025_w42 (!3662)
RRC UE file cleanup

No functional change, just moving functions around so that these are
defined before their usage
2025-10-15 08:26:18 +02:00
Laurent THOMAS
1dd0194e32 remove unused global queues, dead code 2025-10-14 20:36:48 +02:00
francescomani
2b25b32b16 default dmrs port value in ulsch ue scheduler 2025-10-14 16:01:46 +02:00
francescomani
1cd3950178 fix non initialized DMRS port value in case of DCI00 at UE 2025-10-14 15:43:06 +02:00
Guido Casati
0622fb362f ci: container_5g_f1_rfsim - extend F1 handover with 1 more hop
- Trigger handover
- IdleSleep 2s
- Ping ext-dn from NR-UE
- Verify UE(1) connected to DU-PCI1

Validate absence of heap-use-after-free ASAN error found in !3600.

Closes #940
2025-10-14 14:46:19 +02:00
Guido Casati
520d52963e ci: container_5g_f1_rfsim - remove oai-nr-cuup-asan
Rationale: CU-UP image not required for this F1 rfsim workflow’s local pull stage.
2025-10-14 14:46:19 +02:00
Jaroslava Fiedlerova
aead89e9e7 Merge remote-tracking branch 'origin/oai-ue-fix-rsrp-mapping' into integration_2025_w42 (!3701)
OAI UE: add shared RSRP Table 10.1.6.1-1 mapping function to helpers and adopt
it RRC UE

- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following possible
  assert:

  Assertion (enc_rval.encoded > 0) failed!
  In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
  ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!

Motivation: unify RSRP-to-index mapping across layers and fix NR RRC
MeasurementReport encoding failures due to out-of-range values by reusing the
validated mapping.

Note: NR_RSRP-Range.c constraint: /* (0..127) */

Also refactored MeasurementReport to improve the code.
2025-10-14 13:17:24 +02:00
Mario Joa-Ng
4eb9dd3d38 set beam_id to -1 instead of 0. 2025-10-14 12:05:29 +02:00
Mario Joa-Ng
c36a6bcb47 Fix the bug in calculating fh_config->neAxc where num_beams_period is multiplified twice. 2025-10-14 11:56:03 +02:00
Jaroslava Fiedlerova
455553d129 Merge remote-tracking branch 'origin/remove-b200-specific-clock-rate' into integration_2025_w42 (!3693)
Remove B200-specific clock-rate setting

Avoid this clock-rate setting, as we already do it around usrp_lib.cpp:1121, so
it is superfluous. For instance, we also do not set a master clock rate for N3xx
either. This also enables us to synchronize B200 for handover settings,
e.g., for !3651.

See the commit message for more information about synchronization.
2025-10-13 21:50:29 +02:00
Guido Casati
d7c3968df2 RRC UE: MeasurementReport refactor
- Simplify do_nrMeasurementReport_SA API (encoder allocates local report)
- Adopt asn1cCalloc consistently
- Minor init cleanup for UL_DCCH message struct
2025-10-13 16:52:59 +02:00
Guido Casati
edc53ac9dd OAI UE: add shared RSRP Table 10.1.6.1-1 mapping helper and adopt it RRC UE
- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following assert:

Assertion (enc_rval.encoded > 0) failed!
In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!

Motivation: unify RSRP-to-index mapping across layers and fix NR RRC MeasurementReport
encoding failures due to out-of-range values by reusing the validated mapping.

Note NR_RSRP-Range.c constraint:
	{ APC_CONSTRAINED,	 7,  7,  0,  127 }	/* (0..127) */
2025-10-13 16:52:59 +02:00
Jaroslava Fiedlerova
4efb142f9a Merge remote-tracking branch 'origin/remove_l2_sim' into integration_2025_w42 (!3686)
Remove NR L2 simulator code from UE

This MR removes NR (SA and NSA) L2 simulator from the codebase. The code, at
least at the UE side, was done at a time where there was no clear L2/L1 split
leading to a complex implementation that never worked as expected. The L2
simulator has been broken and removed from testing for long time and, once it
needs to be revived, it would require a complete new implementation.
2025-10-13 14:19:24 +02:00
Jaroslava Fiedlerova
3155bf907c Merge remote-tracking branch 'origin/type0_PDSCH' into integration_2025_w42 (!3495)
Type0 PDSCH frequency allocation at L1 UE
2025-10-13 14:18:51 +02:00
Jaroslava Fiedlerova
f4b93dce53 Merge remote-tracking branch 'origin/nhedberg/antennaPorts' into integration_2025_w42 (!3685)
Assign antenna ports correctly for 1 and 2 layers for aerial.

With this change aerial successfully decodes PUSCH with 2 UL layers.

The code should use sched_pusch->dmrs.num_dmrs_cdm_grps_no_data == 1 rather
than NFAPI_MODE != NFAPI_MODE_AERIAL, but that will make the changes a bit
more extensive.

Prior to this change, sending antenna_ports.val = 2 with rank 2 would tell
the UE to transmit on DMRS ports 2,3 rather than 0,1 causing it to not decode.
2025-10-13 14:16:34 +02:00
Jaroslava Fiedlerova
114b03f310 Merge remote-tracking branch 'origin/bug-alias-c99-asn1c' into integration_2025_w42 (!3696)
asn1c doesn't follow c99 variables alias rules, it needs to be compiled this...

asn1c doesn't follow c99 variables alias rules, it needs to be compiled this way.
Issue 509 (https://github.com/vlm/asn1c/issues/509 ) reported in
https://github.com/vlm/asn1c
2025-10-13 11:47:47 +02:00
Jaroslava Fiedlerova
14b6d0f20f Merge remote-tracking branch 'origin/CI-pushDH' into integration_2025_w42 (!3691)
[CI] Ensure multi-arch DockerHub Push after successful image build

This merge request improves the CI script to ensure that the DockerHub-Push
stage executes whenever:
- All Image Build stages succeed &
- doBuild is true &
- The event is a PUSH

This behavior ensures that Docker images are published whenever the image build
stages succeed, regardless of any failures in the Image Test stages.
Jetson ARM64/V8 and AMD64 images will now be published on DockerHub under the
same tag (develop or WEEK_TAG) to provide multi-architecture images.
2025-10-13 11:40:51 +02:00
Jaroslava Fiedlerova
769885c05a Merge remote-tracking branch 'origin/precoder_optimization' into integration_2025_w42 (!3623)
Optimization of PDSCH precoding operation

x86/aarch64 optimizations for precoding, more complete timing reporting in
nr_dlsim. Timing report in nr_dlsim now shows the total PDSCH generation time
and is broken down into Layer mapping, resource mapping and precoding.
The optimizations for x86 are basically reorganizing loops (for AVX512,AVX2,
NEON but not SSE2) to minimize repetitive instructions when formatting of the
precoder weights, and creation of inline functions for complex multiply-add.
AVX512 optimization was added. requiring AVX512BW. Detection of up to 4 PRBs
with common PMI for efficiency with AVX512 (was 2 in develop for AVX2).
For aarch64, native coding of the precoder to avoid inefficient SIMDe
translations for this operation.
nr_dlsim now uses default precoding indices depending on the scenario instead
of 0 which doesn't do precoding at all.

See merge request description for nr_dlsim test results.
2025-10-13 11:39:57 +02:00
francescomani
a20640accc feature set update 2025-10-13 11:08:51 +02:00
francescomani
d20b1120d4 remove temporary code to process type0 as type1 2025-10-13 10:57:49 +02:00
francescomani
9e43f998d9 further code cleanup 2025-10-13 10:57:49 +02:00
francescomani
d07771c538 formatting improvements 2025-10-13 10:57:49 +02:00
francescomani
7eb65f2adc adapt nr_dlsch_extract_rbs for type0 PDSCH freq allocation 2025-10-13 10:57:49 +02:00
francescomani
7d0bf3be51 include information about number of PRBs in frequency allocation structure 2025-10-13 10:57:49 +02:00
francescomani
99e4f54d61 type0 DLSCH frequency allocation for channel estimation 2025-10-13 10:57:49 +02:00
francescomani
e70a2b3cc1 use ad hoc UE FAPI information for PDSCH DMRS reference point 2025-10-13 10:57:49 +02:00
francescomani
121937ad4c input simplification in nr_pdsch_channel_estimation 2025-10-13 10:57:49 +02:00
Shubhika Garg
677a16a4a9 ci(docker): push ARM64 and AMD64 images to DockerHub
- On PUSH events, if image build stages succeed, trigger DockerHub push stage
 - Build the images, then trigger the Push to DockerHub stage
 - Publish Jetson (ARM64/v8) and AMD64 images under the same tag on DockerHub
2025-10-10 14:07:24 +02:00
Robert Schmidt
ce4e647fd8 USRP: move time/clock source setting to later
Doing this before using set_master_clock_rate() on the B200 seems to
invalidate clock settings:

    [HW]   USRP clock set to 1759836386.000000 sec
    [...]
    [HW]   current pps at 3.286750, starting streaming at 4.286750

In other words, the current time setting was reset. With this change
now, we see

    [HW]   USRP clock set to 1759929873.000000 sec
    [...]
    [HW]   current pps at 1759929873.000000, starting streaming at 1759929874.000000

This is because changing clock sources (I assume setting the master
clock rate impacts the clock) can result in changing the time.  From the
documentation of set_time_next_pps() [1]:

> Note: When changing clock sources, a previously set time will most
> likely be lost. It is recommended to set the time after changing the
> clock source. Otherwise, an unexpected time may line up with future PPS
> edges.

[1] https://files.ettus.com/manual/classuhd_1_1usrp_1_1multi__usrp.html#a75b1c5375549e6a446d686ee7d9b4e14
2025-10-10 12:49:29 +02:00
Robert Schmidt
dab8db76d7 CI: Aerial: Split out CN start/stop from main XML
The next commit introduces an "UL-heavy" configuration to be tested with
Aerial. To avoid waiting for the CN, start&stop it once at the beginning
of the CI run.
2025-10-09 19:25:11 +02:00
Robert Schmidt
92bc0aee0e Merge branch 'integration_2025_w41' into 'develop'
Integration `2025.w41`

* !3472 Replace int16 min when obvious
* !3689 Fix OAI UE memory leaks
* !3675 fix RSRP computation at UE
* !3688 Fixes to prevent assertion due to 0 PRB allocation
* !3680 OC PhySim deployment: always undeploy safely
* !3471 SRS noise power
* !3679 CI: Enable Physim threshold check for tests on Caracal and GH
* reduce RFsim F1 throughput after handover

Closes #828

See merge request oai/openairinterface5g!3692
2025-10-09 17:15:02 +00:00
Raymond Knopp
0dcea09e87 bugfix for arm-v8x/v9 2025-10-09 16:04:45 +02:00
Laurent THOMAS
e056acc896 use c16_t type for pm weights, as it is already same type
simplify SIMD version of precoder
2025-10-09 16:04:43 +02:00
Raymond Knopp
fb47748fae fixed precoder_simd after CI run (test for n_layers=1) failed 2025-10-09 16:01:09 +02:00
Raymond Knopp
264f7cb817 aarch64 optimizations for precoding, more complete timing reporting in
nr_dlsim
2025-10-09 16:01:09 +02:00
Raymond Knopp
e44d498cba optimization of DLSCH precoding for AVX2 2025-10-09 16:01:09 +02:00
Raymond Knopp
34ba85f3b1 precoder optimizations for AVX512 2025-10-09 16:01:09 +02:00
Raymond Knopp
8711556d9e Handle larger RB step size in precoding 2025-10-09 16:01:09 +02:00
Raymond Knopp
be236d450e Add measurements for performance analysis 2025-10-09 16:01:09 +02:00
Laurent THOMAS
c537e2cabe move complex numbers types above phy layer, as they are used in fapi for example 2025-10-09 16:01:09 +02:00
Laurent THOMAS
8b9098b7ca remove unused declarations in common/platform_types.h 2025-10-09 16:01:09 +02:00
Reem Bahsoun
1a65abb56c Upgrade cuBB image to 25-2.1 and update doc to match 2025-10-09 15:00:47 +02:00
Laurent THOMAS
00a7890449 asn1c doesn't follow c99 variables alias rules, it needs to be compiled this way. issue #509 reported in https://github.com/vlm/asn1c 2025-10-09 14:04:14 +02:00
Robert Schmidt
ba8b23772e CI RFsim 5G F1: reduce DL iperf throughput
Reduce throughput requirement, as this fails once two DUs are connected
to a UE, which creates more load on the machine and frequently fails
with low throughput.
2025-10-09 08:48:26 +02:00
Robert Schmidt
dd868fd25e Merge remote-tracking branch 'origin/ci-update-physim-threshold' into integration_2025_w41 (!3679)
CI: Enable Physim threshold check for tests on Caracal and GH

This MR adds support for configurable timing threshold files in PhySim
tests.

- Introduces a new CMake cache variable PHYSIM_CHECK_FILES to specify
  one or more timing threshold files (semicolon-separated).
- Enables optional enforcement of timing thresholds check in PhySim
  tests without changing existing test definitions.
- Defines timing thresholds for LDPC encoding/decoding in nr_ulsim,
  nr_dlsim and ldpctest on Caracal and GH machines.
2025-10-09 08:46:46 +02:00
Robert Schmidt
1ffa012014 Merge remote-tracking branch 'origin/SRS-noise-power' into integration_2025_w41 (!3471)
SRS noise power

This MR implements the calculation of the noise power based on SRS in a
different way, and check whether SNR is more accurate or not. This MR is
built on top of the MR: !3460

A graph was added in T_Tracer to observe UL-SNR calculated using SRS.

See merge request description for measurement results.
2025-10-09 08:45:14 +02:00
Jaroslava Fiedlerova
6843625615 Add separate XML file for PhySim with timing check on GH 2025-10-08 19:45:14 +02:00
Jaroslava Fiedlerova
5ec7bcdcd2 Add timing check for physim tests on GraceHopper
Update Dockerfile to pass -DPHYSIM_CHECK_FILES="ThresholdsGracehopper.cmake".
2025-10-08 19:45:14 +02:00
Jaroslava Fiedlerova
bcc616e654 Increase timeout for physim deployments
Extend the timeout for physim deployments on OC to allow tests to complete
reliably.
2025-10-08 19:45:14 +02:00
Jaroslava Fiedlerova
31af716ccb Update timing thershold for offload tests on Caracal 2025-10-08 19:45:14 +02:00
Jaroslava Fiedlerova
ec8efe1b7e Unify physim test definition
Replace the previous add_timed_physim_test() macro with add_physim_test()
to use a single, unified function for defining physim tests. This simplifies
the test configuration and removes redundant macro definitions while keeping
all existing functionality.

This change follows up on the earlier addition of support for including
custom timing threshold files (PHYSIM_CHECK_FILES).

Update existing tests accordingly.
2025-10-08 19:45:14 +02:00
Jaroslava Fiedlerova
8910406a9e Add support for including custom timing threshold files in physim tests
Introduce a new CMake variable PHYSIM_CHECK_FILES to specify CMake files
(semicolon-separated) containing timing thresholds for timed physim tests.
2025-10-08 19:44:35 +02:00
francescomani
6289409f15 remove nsa UE option code 2025-10-08 18:21:10 +02:00
francescomani
f4e4ef74ff remove emulate_l1 code 2025-10-08 17:39:29 +02:00
Jaroslava Fiedlerova
78d91db964 Include timing analysis file in physim.rhel9 image
Add missing timinig analysis scripts to RHEL9 physim docker image. These files
are now copied from the build stage to /oai-ran/openair1/SIMULATION/tests/,
where they are expected by ctest.

Resolves following issue when running ctest in docker container:
CMake Error: Error processing file: /oai-ran/openair1/SIMULATION/tests/RunTimedTest.cmake
2025-10-08 10:57:50 +02:00
Robert Schmidt
a3ac1dbdfe analyze-timing.sh: check only last measurement occurrence
For some physical simulators, we have multiple SNR iterations.

The previous version of the script correctly retained only the last
measurement, but if a previous measurement condition set RC=1, the
script would fail although the final "good" run might fulfil the
measurement condition (IOW, it would show SUCCESS, but still fail on the
check).

Instead, check if all measurement lines finish on SUCCESS, which handles
the above case.
2025-10-08 10:57:50 +02:00
Robert Schmidt
b012700fe4 Fix analyze-timing.sh for mawk compatibility
The awk script in analyze-timing.sh used syntax that works with gawk but fails
on systems where mawk is the default implementation, producing errors such as:

awk: /dev/fd/3: line 6: syntax error at or near ,
-- test command finished with SIGPIPE

Concretely, the match(text, pattern, variable) function does not exist
in mawk, as it cannot capture matches in variables. Work around by
substituing strings, and force a numeric comparison.
2025-10-08 10:57:50 +02:00
Jaroslava Fiedlerova
ddf81a175c Merge remote-tracking branch 'origin/physim-deploy-failsafe' into integration_2025_w41 (!3680)
OC PhySim deployment: always undeploy safely

Always undeploy physim safely. See commits for more details
2025-10-08 08:46:03 +02:00
Jaroslava Fiedlerova
98fea81b39 Merge remote-tracking branch 'origin/fix_0_tbs' into integration_2025_w41 (!3688)
Fixes to prevent assertion due to 0 PRB allocation

Assertion (NPRB>0 && (NPRB + RBstart <= BWPsize)) failed!
In PRBalloc_to_locationandbandwidth0() /home/user/openairinterface5g/common/utils/nr/nr_common.c:506
Illegal NPRB/RBstart Configuration (0,51) for BWPsize 51

Probably caused by missing safeguards to prevent computing TBS with 0 PRB
as input.
2025-10-08 08:43:49 +02:00
Nick Hedberg
9949c7e71b Assign antenna ports correctly for 1 and 2 layers for aerial.
Removes Aerial-specific changes and harmonizes with OAI full-stack.
2025-10-07 17:21:35 +02:00
Jaroslava Fiedlerova
7459e73277 Merge remote-tracking branch 'origin/fix-ue-mem-leaks' into integration_2025_w41 (!3689)
Fix OAI UE memory leaks

Fix 1: Replaced asn1cFreeStruc with ASN_STRUCT_FREE in MAC layer to properly
       free nested ASN.1 structures in cell group configuration.
Fix 2: Removed premature nullification of dedicatedNAS_Message->buf in
       dlInformationTransfer processing to allow proper ASN.1 cleanup.
Fix 3: Fixed memory ownership in nr_rrc_process_dedicatedNAS_MessageList by
       copying OCTET_STRING data instead of transferring ownership, preventing
       ASN.1 cleanup from losing track of allocated memory

Closes #828
2025-10-07 14:33:15 +02:00
Jaroslava Fiedlerova
2424c182d6 Merge remote-tracking branch 'origin/fix_rsrp_ue' into integration_2025_w41 (!3675)
fix RSRP computation at UE

Conflicts between !3595 (merged) and !3596 (merged) leading to double conversion
of RSRP into index in L1 and L2. With this fix it is only converted in L2.
2025-10-07 14:32:35 +02:00
Jaroslava Fiedlerova
b3007ce55b Merge remote-tracking branch 'origin/replace-INT16_MIN-when-obvious' into integration_2025_w41 (!3472)
Replace int16 min when obvious

INT16_MIN doesn't have a opposite value on 16 bits, so SIMD abs (absolute()), or
simple C operations doesn't make the expected result.

example:
(gdb) p (short)-(short)-32768
$4 = -32768
(gdb)

This MR replaces constants INT16_MIN by -INT16_MAX (so -32767) in places where
it used for mathematical operations. This is not perfect, nevertheless reduces
overflow probability.
We saw in some places a dirty case: code do first calls to _mm_adds_epi16
(or subs), so because of the saturated operations, the probability to reach
32767 and -32768 is higher than the other numbers but, _mm_abs_epi16(), or
negate operations (conjugate) can follow, that is making strong error as
abs(-32768)=-32768
2025-10-07 14:27:30 +02:00
Jaroslava Fiedlerova
bd1dadaa79 OC PhySim deployment: log bash script commands
Also, don't use "set -x" debugging for oc login command:
ci-scripts/cls_cmd.py:242 sets BASH_XTRACEFD=1, which makes that all
"set -x" output is in stdout, leading to a redirect to the file into
which we redirect. This would lead to the following error with
unsuccessfull oc login:

  error: You are not a member of project "****-core-for-ci-ran".
  Error from server (Forbidden): imagestreams.image.openshift.io "oai-physim"
  is forbidden: User "system:anonymous" cannot get resource "imagestreams" in
  API group "image.openshift.io" in the namespace "****-ran"
2025-10-07 08:09:20 +02:00
Robert Schmidt
958fe1ed75 OC PhySim deployment: always undeploy safely
This fixes basically two problems. First, remove "set -e", which leads
to the script exiting on error. For instance, there was the sleep which
should account for the time of the pod being in "ContainerCreating", but
might not be enough. In that case, the script would exit, leaving the
pod deployed.

Second, a fixed time is not good, as it can be too short and unduly
prolong waiting time. Replace with a loop.
2025-10-06 16:16:39 +02:00
francescomani
8411a428db prevent faulty behavior of nr_compute_tbs when null input is not producing TBS = 0 2025-10-06 11:10:38 +02:00
Guido Casati
d6047cd83d Fix memory leak in dlInformationTransfer case
- Remove unnecessary NULL assignment for dedicatedNAS_Message->buf
- The original buffer is copied and transfered to NAS, so it can be properly freed by ASN.1 structure cleanup

Root cause: Code was nullifying dedicatedNAS_Message->buf pointer before ASN.1 cleanup could free the original allocation, causing the leak from OCTET_STRING_decode_uper.

AddressSanitizer leak trace (FIXED):
Direct leak of 119 byte(s) in 3 object(s) allocated from:
    /#0 0x7ec2a42b4c38 in __interceptor_realloc
    /#1 0x555fade852e0 in OCTET_STRING_decode_uper
    /#9 0x555fadb48b11 in nr_rrc_ue_decode_dcch.
2025-10-03 12:39:14 +02:00
Guido Casati
9639cbb436 Fix memory leak in nr_rrc_process_dedicatedNAS_MessageList
The leak was caused by improper memory ownership handling in the
dedicatedNAS_MessageList processing. The function was transferring
buffer ownership to NAS messages and then preventing ASN.1 cleanup
from freeing the original allocations by setting
list.count = 0, causing a memory leak.

Leak trace:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
    /#0 0x7f2ce3ab4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
    /#1 0x567907083f0f in OCTET_STRING_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/OCTET_STRING_uper.c:89
    /#2 0x5679070ed5e6 in SET_OF_decode_uper /cmake_targets/ran_build/build/openair2/RRC/NR/MESSAGES/constr_SET_OF_uper.c:70
    /#3 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
    /#4 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
    /#5 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
    /#6 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
    /#7 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
    /#8 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
    /#9 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
    /#10 0x56790708b5f1 in uper_decode /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/uper_decoder.c:83
    /#11 0x567906d44b4b in nr_rrc_ue_decode_dcch /openair2/RRC/NR_UE/rrc_UE.c:2212
    /#12 0x567906d520a3 in rrc_nrue /openair2/RRC/NR_UE/rrc_UE.c:2615
    /#13 0x567906d5f77e in rrc_nrue_task /openair2/RRC/NR_UE/rrc_UE.c:2501
    /#14 0x7f2ce2494ac2 in start_thread nptl/pthread_create.c:442

Fix:
- Copy OCTET_STRING data instead of transferring ownership
- Allow ASN.1 cleanup to properly free original allocations

This fixes the leak that occurred during rrcReconfiguration
message processing when dedicatedNAS_MessageList was present.

Closes #828
2025-10-03 12:35:12 +02:00
Guido Casati
9086fb63de Fix memory leak in nr_rrc_ue_process_masterCellGroup
- Replace asn1cFreeStruc with ASN_STRUCT_FREE in MAC layer cleanup
- Fixes improper memory management of NR_CellGroupConfig structures

Root cause: asn1cFreeStruc only calls ASN_STRUCT_RESET + free(), which doesn't properly free nested ASN.1 allocations. ASN_STRUCT_FREE frees all nested structures completely.

AddressSanitizer leak trace:
Direct leak of 288 byte(s) in 1 object(s) allocated from:
    /#0 0x7fb72bab4a57 in __interceptor_calloc
    /#1 0x593752b28d0d in SEQUENCE_decode_uper
    /#2 0x593752b9a546 in SET_OF_decode_uper
    /#3 0x593752b2863c in SEQUENCE_decode_uper
    /#4 0x593752b47363 in CHOICE_decode_uper
    /#5 0x593752b2863c in SEQUENCE_decode_uper
    /#6 0x593752b2863c in SEQUENCE_decode_uper
    /#7 0x593752b2863c in SEQUENCE_decode_uper
    /#8 0x593752b2863c in SEQUENCE_decode_uper
    /#9 0x593752b2863c in SEQUENCE_decode_uper
    /#10 0x593752b38551 in uper_decode
    /#11 0x5937527d859f in nr_rrc_ue_process_masterCellGroup
    /#12 0x5937527d9408 in nr_rrc_process_reconfiguration_v1530
    /#13 0x5937527dd5bb in nr_rrc_ue_process_rrcReconfiguration
    /#14 0x5937527f5e6b in nr_rrc_ue_decode_dcch
    /#15 0x5937527ff003 in rrc_nrue
    /#16 0x59375280c6de in rrc_nrue_task
2025-10-03 10:38:38 +02:00
Laurent THOMAS
7355b55ad1 this MR replaces constants INT16_MIN by -INT16_MAX (so -32767) in places where it used for mathematical operations 2025-10-03 10:02:48 +02:00
francescomani
42b6576d81 fix RSRP computation at UE (let the higher layers compute the index) 2025-10-03 08:42:41 +02:00
rmagueta
8ca05e51ac Added graph in T_Tracer to observe UL-SNR calculated using SRS 2025-10-02 11:43:07 +01:00
rmagueta
799934024e SRS-based noise calculation using holes 2025-10-02 11:43:07 +01:00
Jaroslava Fiedlerova
3e79774386 Enable DLSCH performance logging in nr_dlsim 2025-09-30 14:03:20 +02:00
Jaroslava Fiedlerova
ff3245ea90 Enable ULSCH performance logging in nr_ulsim 2025-09-30 14:03:20 +02:00
rmagueta
2bf7c2500e Simplifying bit shift in the nr_scale_channel() function 2025-09-25 14:50:37 +02:00
francescomani
c88b7bac72 process the remaining elements in scale channel 2025-09-25 14:50:37 +02:00
francescomani
89004ef241 use common scale channel functions for DLSCH and ULSCH 2025-09-25 14:50:35 +02:00
francescomani
24ac0b5602 move nr_rrc_ue_process_masterCellGroup before usage 2025-09-24 10:31:40 +02:00
francescomani
faf230612b move nr_rrc_ue_process_ueCapabilityEnquiry before usage 2025-09-24 10:30:08 +02:00
francescomani
a49d496b63 move process_lte_nsa_msg before usage 2025-09-24 10:27:44 +02:00
francescomani
6009b06101 move nr_rrc_ue_process_measConfig (and its functions) before usage 2025-09-24 10:23:37 +02:00
francescomani
fc8854a040 move nr_rrc_ue_generate_rrcReestablishmentComplete before its usage 2025-09-24 10:19:51 +02:00
francescomani
719ae673a3 move nr_rrc_ue_process_RadioBearerConfig before its usage 2025-09-24 10:18:34 +02:00
francescomani
1ee2298a88 remove unnecessary declaration of nr_rrc_manage_rlc_bearers 2025-09-24 10:15:17 +02:00
365 changed files with 11268 additions and 11252 deletions

View File

@@ -1,5 +1,51 @@
# RELEASE NOTES: #
## [v2.3.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.3.0) -> July 2025. ##
General new features and improvements (both RAN and UE):
- Preliminary support for RedCap UEs
- Support for NTN LEO scenarios including SIB19 and channel emulation (see
doc/RUNMODEM.md)
- VRTSIM: new shared memory realtime radio (see develop/radio/vrtsim/README.md)
- Support for TDD pattern 2
- Support for long PRACH
- Support for SIB2
- Add unit tests using ctest (see doc/UnitTests.md)
Stability and bug fixes:
- Improve various procedures (e.g., RRC reestablishment, RRC Reject, ...)
- Add improvements for ImScope
- Bugfixes in the entire stack (e.g., #803, #805, #810, #812, #818, #852, #878,
#884, #890, #895, #901, #907, #932, #939 ...)
- Documentation updates
- And many other small fixes, like memory leaks, crashes, ...
RAN changes (gNB/CU/CU-CP/CU-UP/DU/DU-high/DU-low):
- Stability and performance improvements when running with 4-layer DL MIMO
- Stability and performance improvements when running with 2-layer UL MIMO
- Interoperability testing with Metanoia Jura and Foxconn RUs
- Support of O-RAN 7.2 M-plane (Start-up procedure including configuration
management, see also doc/ORAN_FHI7.2_Tutorial.md)
- Upgrade OSC FHI (xran) from E to F release
- Refactoring of LDPC interface and performance improvements
- Support for nFAPI in all scenarios for FR1 (see doc/nfapi.md)
- Support at least 32 UEs concurrently
- Improve robustness when running in split modes (F1, E1)
- Add basic support for beam management in FR2
- Add support for O1 on DU (see also https://gitlab.eurecom.fr/oai/o1-adapter)
- E2 agent: Support for multiple E2SM-RC report service styles
nrUE changes:
- Refactoring of threading towards better code and performance
- Add or rework various procedures (e.g., RA with C-RNTI, Going to Idle, RA, ...)
- Refactor and extend NAS implementation (e.g., Service Request, Registration
Request, Service Acept, Service Reject, ...)
- Support for continuous frequency offset compensation
- Reduce minimum RX-to-TX time to 3
Regression:
- Multiple BWPs do not work reliably on gNB; use tag 2025.w17
## [v2.2.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.2.0) -> November 2024. ##
General 5G improvements (both gNB and UE):

View File

@@ -282,7 +282,7 @@ add_boolean_option(TRACY_ENABLE OFF "Enable tracy instrumentation" ON)
if (TRACY_ENABLE)
# the tracy version here should match the tracy server version
# below is latest release as of this commit
CPMAddPackage("gh:wolfpld/tracy#0.12.2")
CPMAddPackage("gh:wolfpld/tracy#v0.12.2")
endif()
set (OCP_ITTI ${OPENAIR_DIR}/common/utils/ocp_itti)
@@ -1184,7 +1184,6 @@ set(NR_L2_SRC_UE
${NR_UE_RRC_DIR}/L2_interface_ue.c
${NR_UE_RRC_DIR}/main_ue.c
${NR_UE_RRC_DIR}/rrc_UE.c
${NR_UE_RRC_DIR}/rrc_nsa.c
${NR_UE_RRC_DIR}/rrc_timers_and_constants.c
${NR_UE_RRC_DIR}/rrc_sl_preconfig.c
)
@@ -1789,6 +1788,30 @@ target_link_libraries(lte-uesoftmodem PRIVATE ${blas_LIBRARIES} ${cblas_LIBRARIE
target_link_libraries(lte-uesoftmodem PRIVATE
asn1_lte_rrc asn1_s1ap asn1_m2ap asn1_m3ap asn1_x2ap)
# nr RRU
add_executable(oainr_ru
${OPENAIR_DIR}/executables/nr-ru.c
${OPENAIR_DIR}/openair1/PHY/INIT/nr_parms.c
${OPENAIR_DIR}/openair1/SCHED_NR/phy_frame_config_nr.c
${OPENAIR_DIR}/openair1/PHY/INIT/nr_parms.c
${OPENAIR_DIR}/openair1/SCHED_NR/nr_prach_procedures.c
${OPENAIR_DIR}/openair1/SCHED/phy_procedures_lte_common.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach.c
${OPENAIR_DIR}/common/utils/nr/nr_common.c
${OPENAIR_DIR}/radio/COMMON/common_lib.c
${OPENAIR_DIR}/radio/COMMON/record_player.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR_DIR}/executables/main_nr_ru.c
${OPENAIR_DIR}/executables/nr-oru.c
)
target_link_libraries(oainr_ru PRIVATE
-Wl,--start-group
UTIL SCHED_RU_LIB PHY_COMMON PHY_RU shlib_loader
-Wl,--end-group z dl)
target_link_libraries(oainr_ru PRIVATE pthread m CONFIG_LIB rt ${T_LIB} utils
barrier actor)
target_link_libraries(oainr_ru PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs nr_phy_common time_management PHY_NR MAC_NR_COMMON PHY_NR_COMMON)
# nr-softmodem
###################################################
@@ -1977,7 +2000,6 @@ target_link_libraries(nr_pbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(nr_psbchsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/psbchsim.c
${OPENAIR_DIR}/executables/softmodem-common.c
${NR_UE_RRC_DIR}/rrc_nsa.c
${NFAPI_USER_DIR}/nfapi.c
${NFAPI_USER_DIR}/gnb_ind_vars.c
${PHY_INTERFACE_DIR}/queue_t.c
@@ -1998,7 +2020,6 @@ target_link_libraries(nr_pucchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(nr_dlsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlsim.c
${OPENAIR_DIR}/executables/softmodem-common.c
${NR_UE_RRC_DIR}/rrc_nsa.c
${NFAPI_USER_DIR}/nfapi.c
${NFAPI_USER_DIR}/gnb_ind_vars.c
${PHY_INTERFACE_DIR}/queue_t.c
@@ -2028,7 +2049,6 @@ target_link_libraries(nr_ulschsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
add_executable(nr_ulsim
${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulsim.c
${OPENAIR_DIR}/executables/softmodem-common.c
${NR_UE_RRC_DIR}/rrc_nsa.c
${NFAPI_USER_DIR}/nfapi.c
${NFAPI_USER_DIR}/gnb_ind_vars.c
${PHY_INTERFACE_DIR}/queue_t.c

View File

@@ -267,6 +267,24 @@ pipeline {
}
}
}
stage ("DockerHub-Push") {
when { expression {doBuild && "PUSH".equals(env.gitlabActionType)} }
steps {
script {
catchError(buildResult: 'FAILURE', stageResult: 'FAILURE') {
triggerSlaveJob ('RAN-DockerHub-Push', 'DockerHub-Push')
}
}
}
post {
failure {
script {
echo "Push to Docker-Hub KO"
failingStages += '\n * RAN-DockerHub-Push'
}
}
}
}
stage ("Image Test Processes") {
when { expression {doBuild} }
parallel {
@@ -756,23 +774,6 @@ pipeline {
}
}
}
stage ("DockerHub-Push") {
when { expression {doBuild && "PUSH".equals(env.gitlabActionType)} }
steps {
script {
triggerSlaveJob ('RAN-DockerHub-Push', 'DockerHub-Push')
}
}
post {
failure {
script {
echo "Push to Docker-Hub KO"
currentBuild.result = 'FAILURE'
failingStages += '\n * RAN-DockerHub-Push'
}
}
}
}
}
post {
success {

View File

@@ -84,12 +84,20 @@ pipeline {
sh "docker login -u ${DH_Username} -p ${DH_Password} > /dev/null 2>&1"
sh "docker login -u oaicicd -p oaicicd ${OAI_Registry} > /dev/null 2>&1"
listOfImages.eachWithIndex { item, iindex ->
sh "docker pull --quiet ${OAI_Registry}/${item}:develop-${WEEK_SHA}"
sh "docker image tag ${OAI_Registry}/${item}:develop-${WEEK_SHA} ${DH_Account}/${item}:develop"
sh "docker image tag ${OAI_Registry}/${item}:develop-${WEEK_SHA} ${DH_Account}/${item}:${WEEK_TAG}"
sh "docker push --quiet ${DH_Account}/${item}:${WEEK_TAG}"
sh "docker push --quiet ${DH_Account}/${item}:develop"
sh "docker rmi ${DH_Account}/${item}:${WEEK_TAG} ${DH_Account}/${item}:develop ${OAI_Registry}/${item}:develop-${WEEK_SHA}"
if (["oai-gnb", "oai-nr-ue", "oai-nr-cuup"].contains(item)) {
// For images built on AMD64 and ARMv8 Jetson
echo "Pushing image '${item}' for both AMD64 and ARM64 architectures with tags: ${WEEK_TAG} and develop"
sh "docker rmi ${DH_Account}/${item}:${WEEK_TAG} ${DH_Account}/${item}:develop || true"
sh "docker buildx imagetools create --tag ${DH_Account}/${item}:${WEEK_TAG} ${OAI_Registry}/${item}:armv8_develop-${WEEK_SHA} ${OAI_Registry}/${item}:develop-${WEEK_SHA}"
sh "docker buildx imagetools create --tag ${DH_Account}/${item}:develop ${OAI_Registry}/${item}:armv8_develop-${WEEK_SHA} ${OAI_Registry}/${item}:develop-${WEEK_SHA}"
} else {
sh "docker pull --quiet ${OAI_Registry}/${item}:develop-${WEEK_SHA}"
sh "docker image tag ${OAI_Registry}/${item}:develop-${WEEK_SHA} ${DH_Account}/${item}:develop"
sh "docker image tag ${OAI_Registry}/${item}:develop-${WEEK_SHA} ${DH_Account}/${item}:${WEEK_TAG}"
sh "docker push --quiet ${DH_Account}/${item}:develop"
sh "docker push --quiet ${DH_Account}/${item}:${WEEK_TAG}"
}
sh "docker rmi ${DH_Account}/${item}:${WEEK_TAG} ${DH_Account}/${item}:develop ${OAI_Registry}/${item}:develop-${WEEK_SHA} || true"
}
// Proxy is not following the same pattern.
sh "docker image tag proxy:develop ${DH_Account}/proxy:develop"

175
ci-scripts/attenuatorctl.py Normal file
View File

@@ -0,0 +1,175 @@
#!/usr/bin/env python3
import argparse
import logging
import itertools
import usb.core
import usb.util
import sys
import time
logging.basicConfig(
level=logging.DEBUG,
stream=sys.stdout,
format="%(message)s"
)
# helper class parsing command line options for channels and attenuators
class ValidateChAtt(argparse.Action):
def _parse_channels(s):
if len(s.split("-")) == 2:
s, e = [int(x) for x in s.split("-")]
chs = [x for x in range(s, e+1)]
if len(chs) == 0:
raise Exception(f"empty range")
elif len(s.split(",")) > 1:
chs = [int(x) for x in s.split(",")]
elif s.isdigit():
chs = [int(s)]
else:
raise Exception(f"could not parse channel expression")
for c in chs:
if not 1 <= c <= 4:
raise Exception(f"channel number must be within [1,4], but have {c}")
return chs
def __call__(self, parse, args, values, option_string=None):
ch, att = values
try:
chs = ValidateChAtt._parse_channels(ch)
except Exception as e:
parse.exit(1, f"while parsing channel expression {ch}: {e}\n")
if not att.isdigit():
parse.exit(1, f'expected number for attenuation, but got {att}\n')
if not 0 <= int(att) <= 63:
parse.exit(1, f'attenuation must be within [0,63], but is {att}\n')
opts = getattr(args, self.dest) or {}
for c in chs:
opts[c] = int(att)
setattr(args, self.dest, opts)
def _parse_args() -> argparse.Namespace:
epilog = '''
[CHs] can have the following forms:
(1) single channel number w (within [1-4])
(2) a range of channels in the form x-y (x <= y)
(3) a list of channels in the form a,b,c
[ATT] must be within [0,63] (dB)
--set and --reach are mutually exclusive
Examples:
- reset all channels to 0: -s 1-4 0
- set channels 3 and 4 to attenuation 60: -s 3,4 60
- perform attenuation sweep during 10s, reaching ch. 1+2 to 60: -r 1,2 60 -d 10
'''
parser = argparse.ArgumentParser(description='Mini-Circuit RC*DAT attenuator controller',
epilog=epilog,
formatter_class=argparse.RawDescriptionHelpFormatter)
parser.add_argument('--info', '-i', action='store_true', default=False,
help='Get Infos for all connected Mini-Circuits RC*DAT',)
parser.add_argument('--set', '-s', nargs=2, metavar=("[CHs]","[ATT]"),
action=ValidateChAtt, help="Set a fixed attenuation ATT on channels CHs")
parser.add_argument('--reach', '-r', nargs=2, metavar=("[CHs]","[ATT]"),
action=ValidateChAtt, help="Perform an \"attenuation sweep\": reach attenuation ATT on channels CHs")
parser.add_argument('--duration', '-d', action='store', type=float, default=5.0,
help='DURATION for attenuation sweep to --reach given attenuation (Default: 5)',)
parser.add_argument('--progress', '-p', action='store_true', default=False,
help='If provided, will show progress during attenuation sweep',)
return parser.parse_args()
def _exec(dev, cmd):
dev.write(1, cmd)
ans = dev.read(0x81,64)
# take from ans(wer) while valid bytes
sn = itertools.takewhile(lambda x: x < 255 and x > 0, ans)
# turn bytes into characters and accumulate into string
return "".join(map(chr, sn))
def devId(dev):
return f"{dev.idVendor:04x}:{dev.idProduct:04x}"
def _info(dev):
ident = devId(dev)
SerialN = _exec(dev, "*:SN?")
ModelN = _exec(dev, "*:MN?")
Fw = _exec(dev, "*:FIRMWARE?")
logging.info(f'{ident}: model is {ModelN}')
logging.info(f'{ident}: serial number is {SerialN}')
logging.info(f'{ident}: FW version is {Fw}')
def _get_attenuation(dev):
ident = devId(dev)
att = _exec(dev, "*:ATT?")
# remove leading "*" and split by channels
return [float(n) for n in att[1:].split(" ")]
def _set_attenuation(dev, ch_att):
ident = devId(dev)
for ch, att in ch_att:
#logging.debug(f"{ident}: Set attenuation channel {ch}: {att} dB")
att = round(4 * att) / 4 # round to closest 0.25dB
resp = _exec(dev, f"*:CHAN:{ch}:SETATT:{att};" )
def _continuous_set_attenuation(dev, ch_att_end, duration, show_progress=False, step_duration=0.25):
ident = devId(dev)
current = _get_attenuation(dev)
steps = duration / step_duration
ch_att_step = [(ch, (att_end - current[ch - 1]) / steps) for ch, att_end in ch_att_end]
logging.info(f"{ident}: sweep attenuation during {duration} s in {steps} steps: increments {ch_att_step}")
for i in range(1, int(steps)+1):
next_att = [(ch, current[ch - 1] + i * att_step) for ch, att_step in ch_att_step]
_set_attenuation(dev, next_att)
if show_progress:
logging.debug(f"{ident}: attenuation for channel(s): {next_att}")
time.sleep(step_duration)
_set_attenuation(dev, ch_att_end)
def _get_usb_devs(idVendor, idProduct):
devs = []
for dev in usb.core.find(idVendor=idVendor, idProduct=idProduct, find_all=True):
for configuration in dev:
for interface in configuration:
ifnum = interface.bInterfaceNumber
if not dev.is_kernel_driver_active(ifnum):
continue
try:
dev.detach_kernel_driver(ifnum)
except e:
pass
devs.append(dev)
return devs
if __name__ == '__main__':
# Parse the arguments
args = _parse_args()
if args.set and args.reach:
logging.error("--set and --reach are mutually exclusive")
sys.exit(1)
# 20ce:0023 is Mini-Circuit RC*DAT device
devs = _get_usb_devs(idVendor=0x20ce, idProduct=0x0023)
if len(devs) == 0:
logging.error('no Mini-Circuits RC*DAT device detected')
sys.exit(-1)
if len(devs) > 1:
logging.error('more than one Mini-Circuits RC*DAT device detected')
sys.exit(-1)
dev = devs[0]
if args.info:
_info(dev)
if args.set:
_set_attenuation(dev, [(k,v) for k,v in args.set.items()])
if args.reach:
_continuous_set_attenuation(dev, [(k,v) for k,v in args.reach.items()], args.duration, args.progress)
ident = devId(dev)
for i, a in enumerate(_get_attenuation(dev)):
logging.info(f"{ident}: Attenuation channel {i+1}: {a} dB")
sys.exit(0)

View File

@@ -85,7 +85,7 @@ oc-cn5g-20897:
Undeploy: "! scripts/oc-cn5g-undeploy.sh /opt/oai-cn5g-fed-develop-2025-jan oaicicd-core-for-fhi72"
LogCollect: "! scripts/oc-cn5g-logcollect.sh /opt/oai-cn5g-fed-develop-2025-jan oaicicd-core-for-fhi72 %%log_dir%%"
oc-cn5g-00102-ho:
oc-cn5g-00103-ho:
Host: groot
NetworkScript: echo "inet 172.21.6.111"
RunIperf3Server: False

View File

@@ -119,7 +119,7 @@ def ExistEnvFilePrint(ssh, wd, prompt='env vars in existing'):
def WriteEnvFile(ssh, services, wd, tag, flexric_tag):
ret = ssh.run(f'cat {wd}/.env', silent=True, reportNonZero=False)
registry = "oai-ci" # pull_images() gives us this registry path
registry = "oai-ci/" # pull_images() gives us this registry path
envs = {"REGISTRY":registry, "TAG": tag, "FLEXRIC_TAG": flexric_tag}
if ret.returncode == 0: # it exists, we have to update
# transforms env file to dictionary
@@ -134,7 +134,8 @@ def WriteEnvFile(ssh, services, wd, tag, flexric_tag):
# or -asan images. We need to detect which kind we did pull.
fullImageName = GetImageName(ssh, svc, f"{wd}/docker-compose.y*ml")
image = fullImageName.split("/")[-1].split(":")[0]
checkimg = f"{registry}/{image}-asan:{tag}"
# registry now includes the trailing slash ("oai-ci/")
checkimg = f"{registry}{image}-asan:{tag}"
ret = ssh.run(f'docker image inspect {checkimg}', reportNonZero=False)
if ret.returncode == 0:
logging.info(f"detected pulled image {checkimg}")
@@ -395,13 +396,13 @@ class Containerize():
elif image != 'ran-build':
cmd.run(f'sed -i -e "s#ran-build:latest#ran-build:{imageTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
if image == 'oai-gnb-aerial':
cmd.run('cp -f /opt/nvidia-ipc/nvipc_src.2025.08.27.tar.gz .')
cmd.run('cp -f /opt/nvidia-ipc/nvipc_src.2025.10.09.tar.gz .')
logfile = f'{lSourcePath}/cmake_targets/log/{name}.docker.log'
ret = cmd.run(f'{self.cli} build {self.cliBuildOptions} --target {image} --tag {name}:{imageTag} --file docker/Dockerfile.{pattern}{self.dockerfileprefix} {option} . > {logfile} 2>&1', timeout=1200)
t = (name, archiveArtifact(cmd, ctx, logfile))
log_files.append(t)
if image == 'oai-gnb-aerial':
cmd.run('rm -f nvipc_src.2025.08.27.tar.gz')
cmd.run('rm -f nvipc_src.2025.10.09.tar.gz')
# check the status of the build
ret = cmd.run(f"{self.cli} image inspect --format=\'Size = {{{{.Size}}}} bytes\' {name}:{imageTag}")
if ret.returncode != 0:

View File

@@ -255,7 +255,7 @@ def Deploy_Physim(ctx, HTML, node, workdir, script, options):
logging.debug(f'Running physims on server {node} workdir {workdir}')
with cls_cmd.getConnection(node) as c:
sys_info = c.exec_script("scripts/sys-info.sh", 5)
ret = c.exec_script(script, 600, options)
ret = c.exec_script(script, 1000, options)
logging.debug(f'"{script}" finished with code {ret.returncode}, output:\n{ret.stdout}')
HTML.CreateHtmlTestRowQueue('Query system info', 'OK', [sys_info.stdout])
with cls_cmd.getConnection(node) as ssh:
@@ -503,6 +503,11 @@ class OaiCiTest():
t = iperf_time * 2.5
cmd_ue.run(f'rm {client_filename}', reportNonZero=False, silent=True)
if cn.runIperf3Server():
# Clean up any existing iperf3 server processes on this port.
ret = cmd_svr.run(f"{cn.getCmdPrefix()} pkill -f '.*iperf3.*{port}'", reportNonZero=False)
# If pkill succeeds, it means there was a leftover iperf3 server.
if ret.returncode == 0:
logging.warning(f'Iperf3 server on port {port} detected and terminated')
cmd_svr.run(f'{cn.getCmdPrefix()} timeout -vk3 {t} iperf3 -s -B {svrIP} -p {port} -1 {jsonReport} >> /dev/null &', timeout=t)
cmd_ue.run(f'{ue.getCmdPrefix()} timeout -vk3 {t} {iperf_ue} -B {ueIP} -c {svrIP} -p {port} {iperf_opt} {jsonReport} {serverReport} -O 5 >> {client_filename}', timeout=t)
dest_filename = archiveArtifact(cmd_ue, ctx, client_filename)

View File

@@ -1,4 +1,4 @@
Active_gNBs = ( "oai-cu");
Active_gNBs = ( "CU-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
@@ -10,7 +10,7 @@ gNBs =
# cell_type = "CELL_MACRO_GNB";
gNB_name = "oai-cu";
gNB_name = "CU-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;

View File

@@ -23,7 +23,6 @@ gNBs =
////////// Physical parameters:
min_rxtxtime = 2;
do_CSIRS = 1;
do_SRS = 1;
servingCellConfigCommon = (
@@ -135,11 +134,11 @@ gNBs =
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
dl_UL_TransmissionPeriodicity = 5;
nrofDownlinkSlots = 3;
nrofDownlinkSymbols = 10;
nrofUplinkSlots = 1;
nrofUplinkSymbols = 2;
ssPBCH_BlockPower = -25;
}

View File

@@ -1,4 +1,4 @@
Active_gNBs = ( "oai-du0");
Active_gNBs = ( "DU0-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
@@ -8,7 +8,7 @@ gNBs =
////////// Identification parameters:
gNB_ID = 0xe88;
gNB_DU_ID = 0xe00;
gNB_name = "oai-du0";
gNB_name = "DU0-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1 ;
@@ -107,7 +107,7 @@ gNBs =
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
@@ -159,9 +159,7 @@ MACRLCs = (
tr_n_preference = "f1";
local_n_address = "172.21.19.98";
remote_n_address = "172.21.19.98";
local_n_portc = 500;
local_n_portd = 2154;
remote_n_portc = 501;
remote_n_portd = 2153;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 230;
@@ -176,7 +174,6 @@ L1s = (
prach_dtx_threshold = 100;
pucch0_dtx_threshold = 10;
max_ldpc_iterations = 20;
sl_ahead = 3;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -188,6 +185,7 @@ RUs = (
nb_rx = 1
att_tx = 0;
att_rx = 0;
sl_ahead = 3;
bands = [77];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;

View File

@@ -1,4 +1,4 @@
Active_gNBs = ( "oai-du1");
Active_gNBs = ( "DU1-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
@@ -8,7 +8,7 @@ gNBs =
////////// Identification parameters:
gNB_ID = 0xe88;
gNB_DU_ID = 0xe01;
gNB_name = "oai-du1";
gNB_name = "DU1-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1 ;
@@ -107,8 +107,8 @@ gNBs =
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
ssb_PositionsInBurst_Bitmap = 1;
ssb_PositionsInBurst_Bitmap = 2;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
@@ -159,9 +159,7 @@ MACRLCs = (
tr_n_preference = "f1";
local_n_address = "172.21.19.99";
remote_n_address = "172.21.19.98";
local_n_portc = 500;
local_n_portd = 2154;
remote_n_portc = 501;
remote_n_portd = 2153;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 230;
@@ -176,7 +174,6 @@ L1s = (
prach_dtx_threshold = 100;
pucch0_dtx_threshold = 10;
max_ldpc_iterations = 20;
sl_ahead = 3;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -188,6 +185,7 @@ RUs = (
nb_rx = 1
att_tx = 0;
att_rx = 0;
sl_ahead = 3;
bands = [77];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;

View File

@@ -0,0 +1,227 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
nfapi = "AERIAL";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ({ sst = 1; }); });
nr_cellid = 12345678L;
uess_agg_levels = [0,6,0,0,0];
////////// Physical parameters:
pdsch_AntennaPorts_XP = 2;
pdsch_AntennaPorts_N1 = 2;
pusch_AntennaPorts = 2;
do_CSIRS = 1;
do_SRS = 0;
min_rxtxtime = 2;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# center frequency = 3350.01 MHz
# selected SSB frequency = 3349.92 MHz
absoluteFrequencySSB = 623328;
dl_frequencyBand = 78;
# frequency point A = 3300.87 MHz
dl_absoluteFrequencyPointA = 620058;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 273;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 1099;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 273;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 1099;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 159;# testMAC 158; OAI gNB 98
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#one (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant = -90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 5;
nrofDownlinkSlots = 1;
nrofDownlinkSymbols = 10;
nrofUplinkSlots = 3;
nrofUplinkSymbols = 0;
ssPBCH_BlockPower = -10;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "172.21.6.103"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.202";
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.202";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
remote_s_address = "127.0.0.1"; // pnf addr [!]
local_s_address = "127.0.0.2"; // vnf addr
local_s_portc = 50001; // vnf p5 port
remote_s_portc = 50000; // pnf p5 port [!]
local_s_portd = 50011; // vnf p7 port [!]
remote_s_portd = 50010; // pnf p7 port [!]
tr_s_preference = "aerial";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 220; # 150;
pucch_TargetSNRx10 = 200; #200;
dl_max_mcs = 28;
ul_max_mcs = 28;
ul_min_mcs = 16;
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};

View File

@@ -16,7 +16,7 @@ gNBs =
////////// Physical parameters:
do_SINR = 1;
CSI_report_type = "ssb_sinr";
min_rxtxtime = 6;
disable_harq = 1;
cu_sibs = [2];

View File

@@ -106,8 +106,7 @@ gNBs =
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1

View File

@@ -0,0 +1,237 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 03; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
// Include neighbour configuration for N2 handover
@include "neighbour-config-ho.conf"
nr_cellid = 12345678L;
////////// Physical parameters:
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3610.56 MHz
absoluteFrequencySSB = 679104;
dl_frequencyBand = 77;
# this is 3599.94 MHz
dl_absoluteFrequencyPointA = 678388;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 51;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 13750;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 77;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 51;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 13750;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#one (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "172.21.6.109"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.19.98";
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.19.98";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
ul_prbblack_SNR_threshold = 10;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 100;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0;
att_rx = 0;
bands = [77];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
clock_src = "external";
time_src = "external";
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};

View File

@@ -18,8 +18,6 @@ gNBs =
////////// Physical parameters:
do_CSIRS = 0;
do_SRS = 0;
min_rxtxtime = 6;
servingCellConfigCommon = (

View File

@@ -146,6 +146,7 @@ MACRLCs:
tr_n_preference: local_RRC
pusch_TargetSNRx10: 200
pucch_TargetSNRx10: 200
stats_max_ue: 17
L1s:
- num_cc: 1

View File

@@ -196,6 +196,7 @@ RUs = (
att_tx = 0
att_rx = 0;
bands = [78];
sl_ahead=3;
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;

View File

@@ -21,10 +21,6 @@ gNBs =
nr_cellid = 12345678L
////////// Physical parameters:
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 1;
do_CSIRS = 1;
do_SRS = 0;
uess_agg_levels = [2, 2, 2, 0, 0];
servingCellConfigCommon = (
@@ -186,6 +182,7 @@ MACRLCs = (
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
stats_max_ue = 17;
}
);

View File

@@ -14,7 +14,6 @@ key = "fec86ba6eb707ed08905757b1bb44b8f";
opc= "C42449363BBAD02B66D16BC975D77CC1";
dnn= "oai";
nssai_sst=1;
nssai_sd=16777215;
}
MACRLCs = (

View File

@@ -4,7 +4,6 @@ uicc0 = {
opc= "c42449363bbad02b66d16bc975d77cc1";
dnn= "oai";
nssai_sst=1;
nssai_sd=66051;
}
thread-pool = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"

View File

@@ -17,9 +17,6 @@ gNBs =
////////// Physical parameters:
do_CSIRS = 0;
do_SRS = 0;
servingCellConfigCommon = (
{
#spCellConfigCommon

View File

@@ -42,5 +42,6 @@ WORKDIR /oai-ran/build
RUN cmake -GNinja -DENABLE_PHYSIM_TESTS=ON \
-DSANITIZE_UNDEFINED=OFF -DSANITIZE_ADDRESS=OFF \
-DCMAKE_C_FLAGS=-Werror -DCMAKE_CXX_FLAGS=-Werror \
-DPHYSIM_CHECK_FILES="ThresholdsGracehopper.cmake" \
.. && \
ninja ldpctest polartest smallblocktest nr_pbchsim nr_dlschsim nr_ulschsim nr_dlsim nr_ulsim nr_pucchsim nr_prachsim nr_psbchsim

View File

@@ -321,11 +321,15 @@ def ExecuteActionWithParam(action, ctx):
# Change all execution targets to localhost
node = 'localhost'
command = test.findtext('command')
# Allow referencing repository workspace path in XML via %%workspace%%
command = command.replace("%%workspace%%", CONTAINERS.eNBSourceCodePath)
success = cls_oaicitest.Custom_Command(HTML, node, command)
elif action == 'Custom_Script':
node = test.findtext('node')
script = test.findtext('script')
# Allow referencing repository workspace path in XML via %%workspace%%
script = script.replace("%%workspace%%", CONTAINERS.eNBSourceCodePath)
success = cls_oaicitest.Custom_Script(HTML, node, script)
elif action == 'Pull_Cluster_Image':

View File

@@ -1,7 +1,5 @@
#!/bin/bash
set -e
function die() { echo $@; exit 1; }
[ $# -eq 4 ] || die "usage: $0 <namespace> <release> <image tag> <oai directory>"
@@ -11,11 +9,17 @@ IMG_TAG=${3}
OAI_DIR=${4}
cat /opt/oc-password | oc login -u oaicicd --server https://api.oai.cs.eurecom.fr:6443 > /dev/null
set -x
oc project ${OC_NS} > /dev/null
oc tag oaicicd-ran/oai-physim:${IMG_TAG} ${OC_NS}/oai-physim:${IMG_TAG}
helm install ${OC_RELEASE} ${OAI_DIR}/charts/${OC_RELEASE} --set global.image.version=${IMG_TAG} --wait --timeout 120s
set +x
POD_ID=$(oc get pods | grep oai-${OC_RELEASE} | awk '{print $1}')
sleep 30
wait_creating=30
while [[ $(oc describe pod "$POD_ID" | grep "ContainerCreating") && ${wait_creating} > 0 ]]; do
sleep 1;
let wait_creating=$wait_creating-1
done
echo "Monitoring logs for 'FINISHED' in pod '$POD_ID'"
oc logs -f -n ${OC_NS} "$POD_ID" | while read -r line; do
if [[ "$line" == *"FINISHED"* ]]; then
@@ -27,6 +31,7 @@ oc logs -f -n ${OC_NS} "$POD_ID" | while read -r line; do
break
fi
done
set -x
oc logs -n ${OC_NS} "$POD_ID" >> ${OAI_DIR}/physim_log.txt
oc describe pod $POD_ID >> ${OAI_DIR}/physim_log.txt
helm uninstall ${OC_RELEASE} --wait

View File

@@ -44,7 +44,7 @@
<testCase id="111111">
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
<node>obelix</node>
<node>localhost</node>
<images>oai-enb oai-lte-ue</images>
</testCase>
<testCase id="800813">
@@ -88,16 +88,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE</desc>
<id>l2sim4g_ue</id>
<nodes>obelix</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping trf-gen from LTE-UE 1</desc>
<id>l2sim4g_ue</id>
<nodes>obelix</nodes>
<nodes>localhost</nodes>
<svr_id>l2sim4g_ext_dn</svr_id>
<svr_node>obelix</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>
@@ -106,9 +106,9 @@
<class>Ping</class>
<desc>Ping LTE-UE 1 from trf-gen</desc>
<id>l2sim4g_ext_dn</id>
<nodes>obelix</nodes>
<nodes>localhost</nodes>
<svr_id>l2sim4g_ue</svr_id>
<svr_node>obelix</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>
@@ -117,9 +117,9 @@
<class>Iperf</class>
<desc>Iperf UDP Downlink</desc>
<id>l2sim4g_ue</id>
<nodes>obelix</nodes>
<nodes>localhost</nodes>
<svr_id>l2sim4g_ext_dn</svr_id>
<svr_node>obelix</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 1M -R</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
@@ -129,9 +129,9 @@
<class>Iperf</class>
<desc>Iperf UDP Uplink</desc>
<id>l2sim4g_ue</id>
<nodes>obelix</nodes>
<nodes>localhost</nodes>
<svr_id>l2sim4g_ext_dn</svr_id>
<svr_node>obelix</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 3M</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
@@ -149,7 +149,7 @@
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<node>obelix</node>
<node>localhost</node>
<images>oai-enb oai-lte-ue</images>
</testCase>

View File

@@ -103,16 +103,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020011">
<class>Ping</class>
<desc>Ping Traffic-Gen from LTE-UE</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -121,9 +121,9 @@
<class>Ping</class>
<desc>Ping LTE-UE from Traffic-Gen</desc>
<id>rfsim4g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -136,8 +136,8 @@
<iperf_args>-u -t 30 -b 2M -R</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
<nodes>acamas</nodes>
<svr_node>acamas</svr_node>
<nodes>localhost</nodes>
<svr_node>localhost</svr_node>
</testCase>
<testCase id="030011">
@@ -148,8 +148,8 @@
<iperf_args>-u -t 30 -b 1M</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
<nodes>acamas</nodes>
<svr_node>acamas</svr_node>
<nodes>localhost</nodes>
<svr_node>localhost</svr_node>
</testCase>
<testCase id="100011">

View File

@@ -83,9 +83,9 @@
<class>Ping</class>
<desc>Ping Traffic-Gen from LTE-UE</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_enb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -94,9 +94,9 @@
<class>Ping</class>
<desc>Ping LTE-UE from eNB</desc>
<id>rfsim4g_enb_nos1</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -105,9 +105,9 @@
<class>Iperf</class>
<desc>Iperf UDP DL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_enb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 2M -R</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
@@ -117,9 +117,9 @@
<class>Iperf</class>
<desc>Iperf UDP UL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_enb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 1M</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>

View File

@@ -103,16 +103,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020011">
<class>Ping</class>
<desc>Ping Traffic-Gen from LTE-UE</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -121,9 +121,9 @@
<class>Ping</class>
<desc>Ping LTE-UE from Traffic-Gen</desc>
<id>rfsim4g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -132,9 +132,9 @@
<class>Iperf</class>
<desc>Iperf UDP DL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 2M -R</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
@@ -144,9 +144,9 @@
<class>Iperf</class>
<desc>Iperf UDP UL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 1M</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>

View File

@@ -103,16 +103,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020011">
<class>Ping</class>
<desc>Ping Traffic-Gen from LTE-UE</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -121,9 +121,9 @@
<class>Ping</class>
<desc>Ping LTE-UE from Traffic-Gen</desc>
<id>rfsim4g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -132,9 +132,9 @@
<class>Iperf</class>
<desc>Iperf UDP DL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 2M -R</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
@@ -144,9 +144,9 @@
<class>Iperf</class>
<desc>Iperf UDP UL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 1M</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>

View File

@@ -80,9 +80,9 @@
<class>Iperf2_Unidir</class>
<desc>Iperf2 UDP DL</desc>
<id>rfsim4g_ue_fembms</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_enb_fembms</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 2M</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>

View File

@@ -80,9 +80,9 @@
<class>Iperf</class>
<desc>Iperf UDP DL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_enb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 2M -R</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>

View File

@@ -103,9 +103,9 @@
<class>Ping</class>
<desc>Ping Traffic-Gen from LTE-UE</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -114,9 +114,9 @@
<class>Ping</class>
<desc>Ping LTE-UE from Traffic-Gen</desc>
<id>rfsim4g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -125,9 +125,9 @@
<class>Iperf</class>
<desc>Iperf UDP DL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 2M -R</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
@@ -137,9 +137,9 @@
<class>Iperf</class>
<desc>Iperf UDP UL</desc>
<id>rfsim4g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim4g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_args>-u -t 30 -b 1M</iperf_args>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>

View File

@@ -76,16 +76,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue rfsim5g_ue2 rfsim5g_ue3</id>
<nodes>acamas acamas acamas</nodes>
<nodes>localhost localhost localhost</nodes>
</testCase>
<testCase id="020021">
<class>Ping</class>
<desc>Ping ext-dn from all NR-UEs</desc>
<id>rfsim5g_ue rfsim5g_ue2 rfsim5g_ue3</id>
<nodes>acamas acamas acamas</nodes>
<nodes>localhost localhost localhost</nodes>
<svr_id>rfsim5g_5gc_fixed_ip</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>

View File

@@ -55,6 +55,10 @@
000031
020022
040026
040025
000031
020022
040027
100021
222222
</TestCaseRequestedList>
@@ -64,7 +68,7 @@
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
<node>localhost</node>
<images>oai-gnb-asan oai-nr-cuup-asan oai-nr-ue-asan</images>
<images>oai-gnb-asan oai-nr-ue-asan</images>
</testCase>
<testCase id="800813">
<class>Create_Workspace</class>
@@ -103,7 +107,7 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="000024">
@@ -118,9 +122,9 @@
<class>Ping</class>
<desc>Ping ext-dn from all NR-UEs</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -128,30 +132,30 @@
<testCase id="030020">
<class>Custom_Command</class>
<desc>Simulate a DL radio channel with noise (3 dB)</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo channelmod modify 0 noise_power_dB 3 | ncat --send-only 192.168.71.181 8091</command>
</testCase>
<testCase id="030021">
<class>Iperf</class>
<desc>Iperf (DL/5Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 5M -t 20 -R</iperf_args>
<desc>Iperf (DL/3Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20 -R</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030022">
<class>Iperf</class>
<desc>Iperf (UL/3Mbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/3Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
@@ -159,7 +163,7 @@
<testCase id="040001">
<class>Custom_Command</class>
<desc>Trigger Reestablishment</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci force_reestab | ncat 192.168.71.171 9090 | grep -E 'Reset RLC counters of UE RNTI [0-9a-f]{4} to trigger reestablishment'</command>
</testCase>
@@ -167,9 +171,9 @@
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i0.5 -w25</ping_args>
<ping_packetloss_threshold>80</ping_packetloss_threshold>
</testCase>
@@ -177,56 +181,56 @@
<testCase id="040002">
<class>Custom_Command</class>
<desc>Verify Reestablishment</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci get_reestab_count | ncat 192.168.71.150 9090 | grep -E 'UE RNTI [0-9a-f]{4} reestab 1'</command>
</testCase>
<testCase id="040021">
<class>Custom_Command</class>
<desc>Simulate a disruption of DL radio channel (ploss 55)</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo channelmod modify 0 ploss 55 | ncat 192.168.71.181 8091</command>
</testCase>
<testCase id="040022">
<class>Custom_Command</class>
<desc>Get UE sync state (UE ID 0)</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ciUE sync_state 0 | ncat 192.168.71.181 8091 | grep -E UE_NOT_SYNC</command>
</testCase>
<testCase id="040023">
<class>Custom_Command</class>
<desc>Restoration of the original DL channel conditions (ploss 20)</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo channelmod modify 0 ploss 20 | ncat 192.168.71.181 8091</command>
</testCase>
<testCase id="040024">
<class>Custom_Command</class>
<desc>Get UE sync state (UE ID 0)</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ciUE sync_state 0 | ncat 192.168.71.181 8091 | grep -E UE_CONNECTED</command>
</testCase>
<testCase id="040025">
<class>Custom_Command</class>
<desc>Trigger Handover</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci trigger_f1_ho | ncat 192.168.71.150 9090</command>
</testCase>
<testCase id="040026">
<class>Custom_Command</class>
<desc>UE (1) connected to DU-PCI 0?</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 192.168.71.150 9090 | grep "3584"</command>
</testCase>
<testCase id="040027">
<class>Custom_Command</class>
<desc>UE (1) connected to DU-PCI 1?</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 192.168.71.150 9090 | grep "3585"</command>
</testCase>
@@ -245,7 +249,7 @@
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<node>localhost</node>
<images>oai-gnb-asan oai-nr-cuup-asan oai-nr-ue-asan</images>
<images>oai-gnb-asan oai-nr-ue-asan</images>
</testCase>
</testCaseList>

View File

@@ -70,16 +70,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020011">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -88,9 +88,9 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -100,9 +100,9 @@
<desc>Iperf (DL/3Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 3M -t 30 -R</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
@@ -112,9 +112,9 @@
<desc>Iperf (UL/3Mbps/UDP)(30 sec)</desc>
<iperf_args>-u -b 3M -t 30</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>

View File

@@ -125,16 +125,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue rfsim5g_ue2 rfsim5g_ue3 rfsim5g_ue4 rfsim5g_ue5 rfsim5g_ue6 rfsim5g_ue7 rfsim5g_ue8 rfsim5g_ue9 rfsim5g_ue10</id>
<nodes>acamas acamas acamas acamas acamas acamas acamas acamas acamas acamas</nodes>
<nodes>localhost localhost localhost localhost localhost localhost localhost localhost localhost localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -143,9 +143,9 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -154,9 +154,9 @@
<class>Ping</class>
<desc>Ping ext-dn from Second NR-UE</desc>
<id>rfsim5g_ue2</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -165,9 +165,9 @@
<class>Ping</class>
<desc>Ping Second NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue2</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -176,9 +176,9 @@
<class>Ping</class>
<desc>Ping ext-dn from both UEs</desc>
<id>rfsim5g_ue rfsim5g_ue2</id>
<nodes>acamas acamas</nodes>
<nodes>localhost localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -187,33 +187,33 @@
<class>Ping</class>
<desc>Ping ext-dn from all UEs</desc>
<id>rfsim5g_ue rfsim5g_ue2 rfsim5g_ue3 rfsim5g_ue4 rfsim5g_ue5 rfsim5g_ue6 rfsim5g_ue7 rfsim5g_ue8 rfsim5g_ue9 rfsim5g_ue10</id>
<nodes>acamas acamas acamas acamas acamas acamas acamas acamas acamas acamas</nodes>
<nodes>localhost localhost localhost localhost localhost localhost localhost localhost localhost localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25 -s 1016</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="030001">
<class>Iperf</class>
<desc>Iperf (DL/3Mbps/UDP)(30 sec)</desc>
<desc>Iperf (DL/3Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20 -R</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030002">
<class>Iperf</class>
<desc>Iperf (UL/1Mbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/1Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 1M -t 20</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
@@ -222,21 +222,21 @@
<class>Attach_UE</class>
<desc>Attach OAI UE 1 and 2</desc>
<id>rfsim5g_ue rfsim5g_ue2</id>
<nodes>acamas acamas</nodes>
<nodes>localhost localhost</nodes>
</testCase>
<testCase id="444444">
<class>Detach_UE</class>
<desc>Detach OAI UE 1 and 2</desc>
<id>rfsim5g_ue rfsim5g_ue2</id>
<nodes>acamas acamas</nodes>
<nodes>localhost localhost</nodes>
</testCase>
<testCase id="444445">
<class>Detach_UE</class>
<desc>Detach OAI UE 3 to 10</desc>
<id>rfsim5g_ue3 rfsim5g_ue4 rfsim5g_ue5 rfsim5g_ue6 rfsim5g_ue7 rfsim5g_ue8 rfsim5g_ue9 rfsim5g_ue10</id>
<nodes>acamas acamas acamas acamas acamas acamas acamas acamas</nodes>
<nodes>localhost localhost localhost localhost localhost localhost localhost localhost</nodes>
</testCase>
<testCase id="100001">

View File

@@ -88,7 +88,7 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="000004">
@@ -101,9 +101,9 @@
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args> -c 20 -i0.5</ping_args>
<ping_packetloss_threshold>80</ping_packetloss_threshold>
</testCase>
@@ -112,33 +112,33 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="030001">
<class>Iperf</class>
<desc>Iperf (DL/3Mbps/UDP)(30 sec)</desc>
<desc>Iperf (DL/3Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20 -R</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030002">
<class>Iperf</class>
<desc>Iperf (UL/1Mbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/1Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 1M -t 20</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
@@ -146,14 +146,14 @@
<testCase id="040001">
<class>Custom_Command</class>
<desc>Force Msg3 C-RNTI RA</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ciUE force_crnti_ra | ncat 192.168.71.150 8091</command>
</testCase>
<testCase id="040002">
<class>Custom_Command</class>
<desc>Force RRC_IDLE (UE ID 0)</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ciUE force_RRC_IDLE | ncat 192.168.71.150 8091</command>
</testCase>

View File

@@ -70,16 +70,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -88,33 +88,33 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="030001">
<class>Iperf</class>
<desc>Iperf (DL/10Mbps/UDP)(30 sec)</desc>
<desc>Iperf (DL/10Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 10M -t 20 -R</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030002">
<class>Iperf</class>
<desc>Iperf (UL/3Mbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/3Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>

View File

@@ -49,7 +49,7 @@
<testCase id="004000">
<class>Custom_Command</class>
<desc>Clean-Up any residual volume</desc>
<node>acamas</node>
<node>localhost</node>
<command>docker volume rm 5g_rfsimulator_fdd_phytest_rrc.config -f</command>
</testCase>
<testCase id="800813">
@@ -77,9 +77,9 @@
<class>Ping</class>
<desc>Ping gNB from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_gnb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c20 -i0.2</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>
@@ -88,33 +88,33 @@
<class>Ping</class>
<desc>Ping NR-UE from gNB</desc>
<id>rfsim5g_gnb_nos1</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c20 -i0.2</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>
<testCase id="030011">
<class>Iperf</class>
<desc>Iperf (DL/30kbps/UDP)(30 sec)</desc>
<desc>Iperf (DL/30kbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 0.03M -t 20 -R -c 10.0.1.1</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_gnb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030012">
<class>Iperf</class>
<desc>Iperf (UL/30kbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/30kbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 0.03M -t 20 -c 10.0.1.1</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_gnb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>

View File

@@ -70,16 +70,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i0.2</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>
@@ -88,9 +88,9 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i0.2</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>

View File

@@ -48,56 +48,52 @@
<testCase id="111111">
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
<svr_id>0</svr_id>
<node>localhost</node>
<images>oai-gnb-asan oai-nr-ue</images>
</testCase>
<testCase id="800813">
<class>Create_Workspace</class>
<desc>Create new Workspace</desc>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<node>localhost</node>
</testCase>
<testCase id="000001">
<class>Deploy_Object</class>
<desc>Deploy OAI 5G CoreNetwork</desc>
<node>localhost</node>
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_multiue</yaml_path>
<services>mysql oai-amf oai-smf oai-upf oai-ext-dn</services>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000002">
<class>Deploy_Object</class>
<desc>Deploy OAI 5G gNB RF sim SA</desc>
<node>localhost</node>
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_multiue</yaml_path>
<services>oai-gnb</services>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000003">
<class>Deploy_Object</class>
<desc>Deploy OAI 5G NR-UE RF sim SA</desc>
<node>localhost</node>
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_multiue</yaml_path>
<services>oai-nr-ue</services>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000008">
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_multiue1 rfsim5g_multiue2 rfsim5g_multiue3 rfsim5g_multiue4 rfsim5g_multiue5 rfsim5g_multiue6 rfsim5g_multiue7 rfsim5g_multiue8 rfsim5g_multiue9 rfsim5g_multiue10</id>
<nodes>acamas acamas acamas acamas acamas acamas acamas acamas acamas acamas</nodes>
<nodes>localhost localhost localhost localhost localhost localhost localhost localhost localhost localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_multiue1</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -106,9 +102,9 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_multiue1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -117,9 +113,9 @@
<class>Ping</class>
<desc>Ping ext-dn from Second NR-UE</desc>
<id>rfsim5g_multiue2</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -128,9 +124,9 @@
<class>Ping</class>
<desc>Ping Second NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_multiue2</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -139,9 +135,9 @@
<class>Ping</class>
<desc>Ping ext-dn from both UEs</desc>
<id>rfsim5g_multiue1 rfsim5g_multiue2</id>
<nodes>acamas acamas</nodes>
<nodes>localhost localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -150,33 +146,33 @@
<class>Ping</class>
<desc>Ping ext-dn from all UEs</desc>
<id>rfsim5g_multiue1 rfsim5g_multiue2 rfsim5g_multiue3 rfsim5g_multiue4 rfsim5g_multiue5 rfsim5g_multiue6 rfsim5g_multiue7 rfsim5g_multiue8 rfsim5g_multiue9 rfsim5g_multiue10</id>
<nodes>acamas acamas acamas acamas acamas acamas acamas acamas acamas acamas</nodes>
<nodes>localhost localhost localhost localhost localhost localhost localhost localhost localhost localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25 -s 1016</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="030001">
<class>Iperf</class>
<desc>Iperf (DL/3Mbps/UDP)(30 sec)</desc>
<desc>Iperf (DL/3Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20 -R</iperf_args>
<id>rfsim5g_multiue1</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030002">
<class>Iperf</class>
<desc>Iperf (UL/1Mbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/1Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 1M -t 20</iperf_args>
<id>rfsim5g_multiue1</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
@@ -185,7 +181,7 @@
<class>Detach_UE</class>
<desc>Detach OAI UEs</desc>
<id>rfsim5g_multiue1</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="100001">
@@ -195,15 +191,14 @@
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_multiue</yaml_path>
<d_retx_th>1,0,0,0</d_retx_th>
<u_retx_th>1,0,0,0</u_retx_th>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<node>localhost</node>
</testCase>
<testCase id="222222">
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<svr_id>0</svr_id>
<node>localhost</node>
<images>oai-gnb-asan oai-nr-ue</images>
</testCase>

View File

@@ -55,58 +55,54 @@
<testCase id="111111">
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
<svr_id>0</svr_id>
<node>localhost</node>
<images>oai-gnb-asan oai-nr-cuup-asan oai-nr-ue-asan</images>
</testCase>
<testCase id="800813">
<class>Create_Workspace</class>
<desc>Create new Workspace</desc>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<node>localhost</node>
</testCase>
<testCase id="000001">
<class>Deploy_Object</class>
<desc>Deploy OAI 5G CoreNetwork</desc>
<node>localhost</node>
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_n2_ho</yaml_path>
<services>mysql oai-amf oai-smf oai-upf oai-ext-dn</services>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000002">
<class>Deploy_Object</class>
<desc>Deploy OAI 5G CU-CP/CU-UP/DU 0 + UE RFsim SA</desc>
<node>localhost</node>
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_n2_ho</yaml_path>
<services>oai-cucp-0 oai-cuup-0 oai-du-0 oai-nr-ue</services>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000003">
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="000004">
<class>Deploy_Object</class>
<desc>Deploy OAI 5G CU-CP/CU-UP/DU 1 RFsim SA</desc>
<node>localhost</node>
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_n2_ho</yaml_path>
<services>oai-cucp-1 oai-cuup-1 oai-du-1</services>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 50 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -115,33 +111,33 @@
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 50 -i 0.25</ping_args>
<ping_packetloss_threshold>10</ping_packetloss_threshold>
</testCase>
<testCase id="030001">
<class>Iperf</class>
<desc>Iperf (DL/10Mbps/UDP)(30 sec)</desc>
<desc>Iperf (DL/10Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20 -R</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030002">
<class>Iperf</class>
<desc>Iperf (UL/4Mbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/4Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 1M -t 20</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
@@ -155,7 +151,7 @@
<testCase id="050001">
<class>Custom_Command</class>
<desc>Trigger N2 Handover</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci trigger_n2_ho 1,1 | ncat 192.168.71.150 9090</command>
<command_fail>yes</command_fail>
</testCase>
@@ -163,14 +159,14 @@
<testCase id="050002">
<class>Custom_Command</class>
<desc>UE (1) connected to DU-PCI 1?</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 192.168.71.180 9090 | grep "1234"</command>
</testCase>
<testCase id="050003">
<class>Custom_Command</class>
<desc>Trigger N2 Handover</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci trigger_n2_ho 0,1 | ncat 192.168.71.180 9090</command>
<command_fail>yes</command_fail>
</testCase>
@@ -178,7 +174,7 @@
<testCase id="050004">
<class>Custom_Command</class>
<desc>UE (1) connected to DU-PCI 0?</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 192.168.71.150 9090 | grep "3584"</command>
</testCase>
@@ -186,9 +182,8 @@
<class>Undeploy_Object</class>
<always_exec>true</always_exec>
<desc>Undeploy all OAI 5G stack</desc>
<node>localhost</node>
<yaml_path>ci-scripts/yaml_files/5g_rfsimulator_n2_ho</yaml_path>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<d_retx_th>10,100,100,100</d_retx_th>
<u_retx_th>10,100,100,100</u_retx_th>
</testCase>
@@ -197,7 +192,7 @@
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<svr_id>0</svr_id>
<node>localhost</node>
<images>oai-gnb-asan oai-nr-cuup-asan oai-nr-ue-asan</images>
</testCase>

View File

@@ -74,16 +74,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -92,9 +92,9 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -102,7 +102,7 @@
<testCase id="040001">
<class>Custom_Command</class>
<desc>Trigger Reestablishment</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci force_reestab | ncat 192.168.71.140 9090 | grep -E 'Reset RLC counters of UE RNTI [0-9a-f]{4} to trigger reestablishment'</command>
<command_fail>yes</command_fail>
</testCase>
@@ -111,9 +111,9 @@
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i0.5 -w25</ping_args>
<ping_packetloss_threshold>80</ping_packetloss_threshold>
</testCase>
@@ -121,7 +121,7 @@
<testCase id="040002">
<class>Custom_Command</class>
<desc>Verify Reestablishment</desc>
<node>acamas</node>
<node>localhost</node>
<command>echo ci get_reestab_count | ncat 192.168.71.140 9090 | grep -E 'UE RNTI [0-9a-f]{4} reestab 1'</command>
<command_fail>yes</command_fail>
</testCase>

View File

@@ -69,16 +69,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -87,9 +87,9 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>

View File

@@ -74,7 +74,7 @@
<testCase id="000005">
<class>Custom_Command</class>
<desc>Check that UE synched</desc>
<node>acamas</node>
<node>localhost</node>
<command>docker logs rfsim5g-oai-nr-ue-2 | grep -m 1 "PSBCH RX:OK"</command>
</testCase>

View File

@@ -49,7 +49,7 @@
<testCase id="004000">
<class>Custom_Command</class>
<desc>Clean-Up any residual volume</desc>
<node>acamas</node>
<node>localhost</node>
<command>docker volume rm 5g_rfsimulator_tdd_dora_rrc.config -f</command>
</testCase>
<testCase id="800813">
@@ -83,9 +83,9 @@
<class>Ping</class>
<desc>Ping gNB from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_gnb_nos1</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c20 -i0.2</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>
@@ -94,9 +94,9 @@
<class>Ping</class>
<desc>Ping NR-UE from gNB</desc>
<id>rfsim5g_gnb_nos1</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c20 -i0.2</ping_args>
<ping_packetloss_threshold>0</ping_packetloss_threshold>
</testCase>

View File

@@ -72,16 +72,16 @@
<class>Attach_UE</class>
<desc>Attach OAI UE (Wait for IP)</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020001">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE</desc>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -90,9 +90,9 @@
<class>Ping</class>
<desc>Ping NR-UE from ext-dn</desc>
<id>rfsim5g_ext_dn</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ue</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
@@ -101,40 +101,40 @@
<class>Attach_UE</class>
<desc>Verify 2nd PDU session is up</desc>
<id>rfsim5g_ue_pdu_2</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
</testCase>
<testCase id="020003">
<class>Ping</class>
<desc>Ping ext-dn from NR-UE on PDU session ID 2</desc>
<id>rfsim5g_ue_pdu_2</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<ping_args>-c 20 -i 0.25</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="030001">
<class>Iperf</class>
<desc>Iperf (DL/3Mbps/UDP)(30 sec)</desc>
<desc>Iperf (DL/3Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 3M -t 20 -R</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="030002">
<class>Iperf</class>
<desc>Iperf (UL/1Mbps/UDP)(30 sec)</desc>
<desc>Iperf (UL/1Mbps/UDP)(20 sec)</desc>
<iperf_args>-u -b 1M -t 20</iperf_args>
<id>rfsim5g_ue</id>
<nodes>acamas</nodes>
<nodes>localhost</nodes>
<svr_id>rfsim5g_ext_dn</svr_id>
<svr_node>acamas</svr_node>
<svr_node>localhost</svr_node>
<iperf_packetloss_threshold>5</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>

View File

@@ -0,0 +1,37 @@
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-AERIAL-SA-CN-START</htmlTabRef>
<htmlTabName>Deploy 5GC</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
555000
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="555000">
<class>DeployCoreNetwork</class>
<desc>Initialize 5G Core</desc>
<cn_id>oc-cn5g-20897-aerial</cn_id>
</testCase>
</testCaseList>

View File

@@ -0,0 +1,38 @@
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-AERIAL-SA-CN-STOP</htmlTabRef>
<htmlTabName>Undeploy 5GC</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
000555
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="000555">
<class>UndeployCoreNetwork</class>
<always_exec>true</always_exec>
<desc>Terminate 5G Core</desc>
<cn_id>oc-cn5g-20897-aerial</cn_id>
</testCase>
</testCaseList>

View File

@@ -25,7 +25,6 @@
<htmlTabName>AERIAL 100 MHz TDD SA</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
555000
111111
000222
800813
@@ -40,15 +39,8 @@
000222
222222
333333
000555
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="555000">
<class>DeployCoreNetwork</class>
<desc>Initialize 5G Core</desc>
<cn_id>oc-cn5g-20897-aerial</cn_id>
</testCase>
<testCase id="111111">
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
@@ -160,12 +152,5 @@
<node>gracehopper1-oai</node>
<images>oai-gnb-aerial</images>
</testCase>
<testCase id="000555">
<class>UndeployCoreNetwork</class>
<always_exec>true</always_exec>
<desc>Terminate 5G Core</desc>
<cn_id>oc-cn5g-20897-aerial</cn_id>
</testCase>
</testCaseList>

View File

@@ -0,0 +1,144 @@
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-AERIAL-SA-UL-Heavy</htmlTabRef>
<htmlTabName>AERIAL 100 MHz DSUUU SA</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
111111
000222
800813
002222
002223
000111
000011
000032
000033
000022
000222
222222
333333
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="111111">
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
<node>gracehopper1-oai</node>
<images>oai-gnb-aerial</images>
<tag_prefix>arm_</tag_prefix>
</testCase>
<testCase id="800813">
<class>Create_Workspace</class>
<desc>Create new Workspace for server 0</desc>
<node>gracehopper1-oai</node>
</testCase>
<testCase id="002222">
<class>Deploy_Object</class>
<desc>Deploy PNF/Nvidia CUBB in a container</desc>
<node>gracehopper1-oai</node>
<yaml_path>ci-scripts/yaml_files/sa_gnb_aerial_ul</yaml_path>
<services>nv-cubb</services>
</testCase>
<testCase id="002223">
<class>Deploy_Object</class>
<desc>Deploy VNF in a container</desc>
<node>gracehopper1-oai</node>
<yaml_path>ci-scripts/yaml_files/sa_gnb_aerial_ul</yaml_path>
<services>oai-gnb-aerial</services>
</testCase>
<testCase id="000111">
<class>Attach_UE</class>
<desc>Attach Quectel</desc>
<id>up2-aerial</id>
</testCase>
<testCase id="000011">
<class>Ping</class>
<desc>Ping: 100pings in 20sec</desc>
<id>up2-aerial</id>
<svr_id>oc-cn5g-20897-aerial</svr_id>
<ping_args>-c 100 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000022">
<class>Iperf</class>
<desc>iperf (DL/UDP/200M)(30 sec)(single-ue profile)</desc>
<iperf_args>-u -b 200M -t 30 -R</iperf_args>
<svr_id>oc-cn5g-20897-aerial</svr_id>
<id>up2-aerial</id>
<iperf_packetloss_threshold>25</iperf_packetloss_threshold>
<iperf_bitrate_threshold>80</iperf_bitrate_threshold>
</testCase>
<testCase id="000032">
<class>Iperf</class>
<desc>iperf (UL/UDP/200M)(30 sec)(single-ue profile)</desc>
<iperf_args>-u -b 200M -t 30 -l 1428</iperf_args>
<svr_id>oc-cn5g-20897-aerial</svr_id>
<id>up2-aerial</id>
<iperf_packetloss_threshold>10</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="000033">
<class>Iperf</class>
<desc>iperf (UL/UDP/220M)(30 sec)(single-ue profile)</desc>
<may_fail>true</may_fail>
<iperf_args>-u -b 220M -t 30 -l 1428</iperf_args>
<svr_id>oc-cn5g-20897-aerial</svr_id>
<id>up2-aerial</id>
<iperf_packetloss_threshold>10</iperf_packetloss_threshold>
<iperf_bitrate_threshold>90</iperf_bitrate_threshold>
</testCase>
<testCase id="000222">
<class>Detach_UE</class>
<always_exec>true</always_exec>
<desc>Detach Quectel</desc>
<id>up2-aerial</id>
</testCase>
<testCase id="222222">
<class>Undeploy_Object</class>
<always_exec>true</always_exec>
<desc>Undeploy gNB</desc>
<node>gracehopper1-oai</node>
<yaml_path>ci-scripts/yaml_files/sa_gnb_aerial_ul</yaml_path>
<d_retx_th>20,100,100,100</d_retx_th>
<u_retx_th>20,100,100,100</u_retx_th>
</testCase>
<testCase id="333333">
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<node>gracehopper1-oai</node>
<images>oai-gnb-aerial</images>
</testCase>
</testCaseList>

View File

@@ -51,6 +51,8 @@
000024
000025
000026
000027
000028
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
@@ -58,7 +60,7 @@
<testCase id="000001">
<class>DeployCoreNetwork</class>
<desc>Initialize 5G Core</desc>
<cn_id>oc-cn5g-00102-ho</cn_id>
<cn_id>oc-cn5g-00103-ho</cn_id>
</testCase>
<testCase id="000002">
@@ -88,127 +90,134 @@
</testCase>
<testCase id="000006">
<class>Deploy_Object</class>
<desc>Deploy gNB-CU in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_f1_b210_ho</yaml_path>
<node>groot</node>
<services>oai_cu</services>
<class>Custom_Command</class>
<desc>Set attenuator to 0 for DU0 and 17 for DU1</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -s 1,2 0 -s 3,4 25</command>
</testCase>
<testCase id="000007">
<class>Deploy_Object</class>
<desc>Deploy gNB-DU0 (TDD/Band77/20MHz/B210) in a container</desc>
<desc>Deploy gNB-CU in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_f1_b210_ho</yaml_path>
<services>oai_du0</services>
<node>groot</node>
<services>oai-cu</services>
</testCase>
<testCase id="000008">
<class>Deploy_Object</class>
<desc>Deploy gNB-DU0 (TDD/Band77/20MHz/B210) in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_f1_b210_ho</yaml_path>
<services>oai-du0</services>
<node>groot</node>
</testCase>
<testCase id="000009">
<class>Deploy_Object</class>
<desc>Deploy gNB-DU1 (TDD/Band77/20MHz/B210) in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_f1_b210_ho</yaml_path>
<node>rocket</node>
<services>oai-du1</services>
</testCase>
<testCase id="000010">
<class>Attach_UE</class>
<desc>Attach Quectel</desc>
<id>raspix</id>
</testCase>
<testCase id="000009">
<testCase id="000011">
<class>Ping</class>
<desc>Ping: 100pings in 20sec</desc>
<id>raspix</id>
<svr_id>oc-cn5g-00102-ho</svr_id>
<svr_id>oc-cn5g-00103-ho</svr_id>
<ping_args>-c 100 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000010">
<class>Deploy_Object</class>
<desc>Deploy gNB-DU1 (TDD/Band77/20MHz/B210) in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_f1_b210_ho</yaml_path>
<node>rocket</node>
<services>oai_du1</services>
</testCase>
<testCase id="000011">
<testCase id="000012">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
</testCase>
<testCase id="000012">
<testCase id="000013">
<class>Custom_Command</class>
<desc>Trigger Handover</desc>
<node>groot</node>
<command>echo ci trigger_f1_ho | ncat 127.0.0.1 9090</command>
<desc>Attenuate DU0 by 15 and remove the attenuation on DU1 to trigger Handover</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -r 1,2 15 -r 3,4 0 -d 5</command>
</testCase>
<testCase id="000013">
<testCase id="000014">
<class>Ping</class>
<desc>Ping: 50pings in 10sec</desc>
<id>raspix</id>
<svr_id>oc-cn5g-00102-ho</svr_id>
<svr_id>oc-cn5g-00103-ho</svr_id>
<ping_args>-c 50 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000014">
<testCase id="000015">
<class>Custom_Command</class>
<desc>UE connected to DU1?</desc>
<node>groot</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 127.0.0.1 9090 | grep "3585"</command>
</testCase>
<testCase id="000015">
<class>Custom_Command</class>
<desc>Trigger Handover</desc>
<node>groot</node>
<command>echo ci trigger_f1_ho | ncat 127.0.0.1 9090</command>
<testCase id="000016">
<class>Custom_Command</class>
<desc>Attenuate DU1 by 17dB and remove attenuation on DU0 to trigger Handover</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -r 1,2 0 -r 3,4 25 -d 5</command>
</testCase>
<testCase id="000016">
<testCase id="000017">
<class>Ping</class>
<desc>Ping: 50pings in 10sec</desc>
<id>raspix</id>
<svr_id>oc-cn5g-00102-ho</svr_id>
<svr_id>oc-cn5g-00103-ho</svr_id>
<ping_args>-c 50 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000017">
<testCase id="000018">
<class>Custom_Command</class>
<desc>UE connected to DU0?</desc>
<node>groot</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 127.0.0.1 9090 | grep "3584"</command>
</testCase>
<testCase id="000018">
<class>Custom_Command</class>
<desc>Trigger Handover</desc>
<node>groot</node>
<command>echo ci trigger_f1_ho | ncat 127.0.0.1 9090</command>
<testCase id="000019">
<class>Custom_Command</class>
<desc>Attenuate DU0 by 15 and remove the attenuation on DU1 to trigger Handover</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -r 1,2 15 -r 3,4 0 -d 5</command>
</testCase>
<testCase id="000019">
<testCase id="000020">
<class>Ping</class>
<desc>Ping: 50pings in 10sec</desc>
<id>raspix</id>
<svr_id>oc-cn5g-00102-ho</svr_id>
<svr_id>oc-cn5g-00103-ho</svr_id>
<ping_args>-c 50 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000020">
<testCase id="000021">
<class>Custom_Command</class>
<desc>UE connected to DU1?</desc>
<node>groot</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 127.0.0.1 9090 | grep "3585"</command>
</testCase>
<testCase id="000021">
<testCase id="000022">
<class>Detach_UE</class>
<always_exec>true</always_exec>
<desc>Detach Quectel</desc>
<id>raspix</id>
</testCase>
<testCase id="000022">
<testCase id="000023">
<class>Undeploy_Object</class>
<always_exec>true</always_exec>
<desc>Undeploy CU-DU0</desc>
@@ -216,7 +225,7 @@
<yaml_path>ci-scripts/yaml_files/5g_sa_f1_b210_ho</yaml_path>
</testCase>
<testCase id="000023">
<testCase id="000024">
<class>Undeploy_Object</class>
<always_exec>true</always_exec>
<desc>Undeploy DU1 </desc>
@@ -224,7 +233,15 @@
<yaml_path>ci-scripts/yaml_files/5g_sa_f1_b210_ho</yaml_path>
</testCase>
<testCase id="000024">
<testCase id="000025">
<class>Custom_Command</class>
<desc>Reset all channels on the attenuator to 0</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -s 1-4 0</command>
<always_exec>true</always_exec>
</testCase>
<testCase id="000026">
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
@@ -232,7 +249,7 @@
<images>oai-gnb</images>
</testCase>
<testCase id="000025">
<testCase id="000027">
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
@@ -240,11 +257,11 @@
<images>oai-gnb</images>
</testCase>
<testCase id="000026">
<testCase id="000028">
<class>UndeployCoreNetwork</class>
<always_exec>true</always_exec>
<desc>Terminate 5G Core</desc>
<cn_id>oc-cn5g-00102-ho</cn_id>
<cn_id>oc-cn5g-00103-ho</cn_id>
</testCase>
</testCaseList>

View File

@@ -0,0 +1,230 @@
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-MONO-N2-HO-B210</htmlTabRef>
<htmlTabName>Monolithic N2 Handover 20 MHz TDD SA</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
000001
000002
000023
000003
000004
000005
000006
000007
000008
000009
000010
000011
000012
000013
000014
000015
000017
000018
000019
000016
000020
000021
000022
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="000001">
<class>DeployCoreNetwork</class>
<desc>Initialize 5G Core</desc>
<cn_id>oc-cn5g-00103-ho</cn_id>
</testCase>
<testCase id="000002">
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
<images>oai-gnb</images>
<node>groot</node>
</testCase>
<testCase id="000023">
<class>Pull_Local_Registry</class>
<desc>Pull Images from Local Registry</desc>
<images>oai-gnb</images>
<node>rocket</node>
</testCase>
<testCase id="000003">
<class>Create_Workspace</class>
<desc>Create new Workspace for groot</desc>
<node>groot</node>
</testCase>
<testCase id="000005">
<class>Create_Workspace</class>
<desc>Create new Workspace on rocket</desc>
<node>rocket</node>
</testCase>
<testCase id="000004">
<class>Custom_Command</class>
<desc>Set initial attenuation on target gNB</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -s 1,2 0 -s 3,4 25</command>
</testCase>
<testCase id="000005">
<class>Deploy_Object</class>
<desc>Deploy Monolithic gNB-PCI0 (TDD/Band77/20MHz/B210) in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_n2_ho_b210</yaml_path>
<node>groot</node>
<services>oai-gnb-pci0</services>
</testCase>
<testCase id="000006">
<class>Deploy_Object</class>
<desc>Deploy Monolithic gNB-PCI1 (TDD/Band77/20MHz/B210) in a container</desc>
<yaml_path>ci-scripts/yaml_files/5g_sa_n2_ho_b210</yaml_path>
<node>rocket</node>
<services>oai-gnb-pci1</services>
</testCase>
<testCase id="000007">
<class>Attach_UE</class>
<desc>Attach Quectel</desc>
<id>raspix</id>
</testCase>
<testCase id="000008">
<class>Ping</class>
<desc>Ping: 100pings in 20sec</desc>
<id>raspix</id>
<svr_id>oc-cn5g-00103-ho</svr_id>
<ping_args>-c 100 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000009">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
</testCase>
<testCase id="000010">
<class>Custom_Command</class>
<desc>Gradually attenuate gNB-PCI0 (ch1-2=15dB) and gNB-PCI1 (ch3-4=0dB) over 5s to trigger N2 Handover to gNB-PCI1</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -r 1,2 15 -r 3,4 0 -d 5</command>
</testCase>
<testCase id="000011">
<class>Ping</class>
<desc>Ping: 50pings in 10sec</desc>
<id>raspix</id>
<svr_id>oc-cn5g-00103-ho</svr_id>
<ping_args>-c 50 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000012">
<class>Custom_Command</class>
<desc>UE connected to gNB-PCI1?</desc>
<node>rocket</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 127.0.0.1 9090 | grep "3585"</command>
</testCase>
<testCase id="000013">
<class>Custom_Command</class>
<desc>Gradually attenuate gNB-PCI0 (ch1-2=0dB) and gNB-PCI1 (ch3-4=15dB) over 5s to trigger N2 Handover back to gNB-PCI0</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -r 1,2 0 -r 3,4 25 -d 5</command>
</testCase>
<testCase id="000014">
<class>Ping</class>
<desc>Ping: 50pings in 10sec</desc>
<id>raspix</id>
<svr_id>oc-cn5g-00103-ho</svr_id>
<ping_args>-c 50 -i 0.2</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="000015">
<class>Custom_Command</class>
<desc>UE connected to gNB-PCI0?</desc>
<node>groot</node>
<command>echo ci fetch_du_by_ue_id 1 | ncat 127.0.0.1 9090 | grep "3584"</command>
</testCase>
<testCase id="000016">
<class>Custom_Command</class>
<always_exec>true</always_exec>
<desc>Reset all attenuators to 0dB</desc>
<node>rocket</node>
<command>python3 %%workspace%%/ci-scripts/attenuatorctl.py -s 1-4 0</command>
</testCase>
<testCase id="000017">
<class>Detach_UE</class>
<always_exec>true</always_exec>
<desc>Detach Quectel</desc>
<id>raspix</id>
</testCase>
<testCase id="000018">
<class>Undeploy_Object</class>
<always_exec>true</always_exec>
<desc>Undeploy Monolithic gNB-PCI0</desc>
<node>groot</node>
<yaml_path>ci-scripts/yaml_files/5g_sa_n2_ho_b210</yaml_path>
</testCase>
<testCase id="000019">
<class>Undeploy_Object</class>
<always_exec>true</always_exec>
<desc>Undeploy Monolithic gNB-PCI1</desc>
<node>rocket</node>
<yaml_path>ci-scripts/yaml_files/5g_sa_n2_ho_b210</yaml_path>
</testCase>
<testCase id="000020">
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<node>groot</node>
<images>oai-gnb</images>
</testCase>
<testCase id="000021">
<class>Clean_Test_Server_Images</class>
<always_exec>true</always_exec>
<desc>Clean Test Images on Test Server</desc>
<node>rocket</node>
<images>oai-gnb</images>
</testCase>
<testCase id="000022">
<class>UndeployCoreNetwork</class>
<always_exec>true</always_exec>
<desc>Terminate 5G Core</desc>
<cn_id>oc-cn5g-00103-ho</cn_id>
</testCase>
</testCaseList>

View File

@@ -42,7 +42,7 @@
<class>Build_eNB</class>
<desc>Build gNB (USRP)</desc>
<node>caracal</node>
<Build_eNB_args>--gNB -w USRP --ninja -c -P --build-lib ldpc_cuda --build-lib ldpc_aal --cmake-opt -DASN1C_EXEC=/opt/asn1c/bin/asn1c</Build_eNB_args>
<Build_eNB_args>--gNB -w USRP --ninja -c -P --build-lib ldpc_cuda --build-lib ldpc_aal --cmake-opt -DASN1C_EXEC=/opt/asn1c/bin/asn1c --cmake-opt -DPHYSIM_CHECK_FILES="ThresholdsOffload.cmake"</Build_eNB_args>
</testCase>
<testCase id="100000">

View File

@@ -21,7 +21,7 @@
-->
<testCaseList>
<htmlTabRef>build-tab</htmlTabRef>
<htmlTabRef>physim-tab</htmlTabRef>
<htmlTabName>PhySim</htmlTabName>
<htmlTabIcon>wrench</htmlTabIcon>
<TestCaseRequestedList>
@@ -38,9 +38,9 @@
<testCase id="010201">
<class>Build_Deploy_Docker_PhySim</class>
<desc>Deploy and Deploy PhySim</desc>
<desc>Build and Deploy PhySim</desc>
<node>localhost</node>
<ctest-opt>-R 5g -E physim.5g.nr_dlsim.mcs.mimo.test9 -j16</ctest-opt> <!-- one nr_dlsim test fails on ARM -->
</testCase>
<ctest-opt>-R 5g -E "nr_dlsim|nr_ulsim|ldpctest" -j32</ctest-opt> <!-- one nr_dlsim test fails on ARM -->
</testCase>
</testCaseList>

View File

@@ -0,0 +1,46 @@
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>physim-timed-tab</htmlTabRef>
<htmlTabName>PhySim with timing check</htmlTabName>
<htmlTabIcon>wrench</htmlTabIcon>
<TestCaseRequestedList>
800813
010202
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="800813">
<class>Create_Workspace</class>
<desc>Create new Workspace</desc>
<node>localhost</node>
</testCase>
<testCase id="010202">
<class>Build_Deploy_Docker_PhySim</class>
<desc>Build and Deploy PhySim with timing check</desc>
<node>localhost</node>
<ctest-opt>-R 5g -R "nr_dlsim|nr_ulsim|ldpctest" -E physim.5g.nr_dlsim.mcs.mimo.test9 -j1</ctest-opt> <!-- one nr_dlsim test fails on ARM -->
</testCase>
</testCaseList>

View File

@@ -178,7 +178,7 @@ services:
retries: 5
oai_enb:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: l2sim4g-oai-enb
network_mode: "host"
@@ -210,7 +210,7 @@ services:
retries: 5
oai_ue1:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: l2sim4g-oai-lte-ue1
network_mode: "host"
@@ -229,7 +229,7 @@ services:
retries: 5
oai_ue2:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: l2sim4g-oai-lte-ue2
network_mode: "host"

View File

@@ -178,7 +178,7 @@ services:
retries: 5
oai_enb0:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-enb
networks:
@@ -197,7 +197,7 @@ services:
retries: 5
oai_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:

View File

@@ -1,6 +1,6 @@
services:
oai_enb0:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-enb
networks:
@@ -19,7 +19,7 @@ services:
retries: 5
oai_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:

View File

@@ -178,7 +178,7 @@ services:
retries: 5
oai_enb0:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-enb
networks:
@@ -197,7 +197,7 @@ services:
retries: 5
oai_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:

View File

@@ -178,7 +178,7 @@ services:
retries: 5
oai_enb0:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-enb
networks:
@@ -197,7 +197,7 @@ services:
retries: 5
oai_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:

View File

@@ -1,6 +1,6 @@
services:
oai_enb0:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-enb
networks:
@@ -19,7 +19,7 @@ services:
retries: 5
oai_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:

View File

@@ -1,6 +1,6 @@
services:
oai_enb0:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-enb
networks:
@@ -19,7 +19,7 @@ services:
retries: 5
oai_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:

View File

@@ -178,7 +178,7 @@ services:
retries: 5
oai_enb0:
image: ${REGISTRY:-oaisoftwarealliance}/${ENB_IMG:-oai-enb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${ENB_IMG:-oai-enb}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-enb
networks:
@@ -197,7 +197,7 @@ services:
retries: 5
oai_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${LTEUE_IMG:-oai-lte-ue}:${TAG:-develop}
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:

View File

@@ -92,7 +92,7 @@ services:
retries: 5
oai-cu:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-cu
cap_drop:
- ALL
@@ -121,7 +121,7 @@ services:
retries: 5
oai-du-pci0:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-du-pci0
cap_drop:
- ALL
@@ -152,7 +152,7 @@ services:
retries: 5
oai-du-pci1:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-du-pci1
cap_drop:
- ALL
@@ -187,7 +187,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -90,7 +90,7 @@ services:
start_period: 10s
start_interval: 500ms
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -113,7 +113,7 @@ services:
retries: 5
ipc: host
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -90,7 +90,7 @@ services:
timeout: 5s
retries: 5
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_add:
- SYS_NICE
@@ -114,7 +114,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL
@@ -141,7 +141,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue2:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue2
cap_drop:
- ALL
@@ -168,7 +168,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue3:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue3
cap_drop:
- ALL
@@ -195,7 +195,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue4:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue4
cap_drop:
- ALL
@@ -222,7 +222,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue5:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue5
cap_drop:
- ALL
@@ -249,7 +249,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue6:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue6
cap_drop:
- ALL
@@ -276,7 +276,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue7:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue7
cap_drop:
- ALL
@@ -303,7 +303,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue8:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue8
cap_drop:
- ALL
@@ -330,7 +330,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue9:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue9
cap_drop:
- ALL
@@ -357,7 +357,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue10:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue10
cap_drop:
- ALL

View File

@@ -90,7 +90,7 @@ services:
timeout: 5s
retries: 5
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -112,7 +112,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -90,7 +90,7 @@ services:
timeout: 5s
retries: 5
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -115,7 +115,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -71,7 +71,7 @@ services:
interface_name: eth1
oai-cucp:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-cucp
cap_drop:
- ALL
@@ -100,7 +100,7 @@ services:
retries: 5
oai-cuup:
image: ${REGISTRY:-oaisoftwarealliance}/${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
container_name: rfsim5g-oai-cuup
cap_drop:
- ALL
@@ -131,7 +131,7 @@ services:
retries: 5
oai-cuup2:
image: ${REGISTRY:-oaisoftwarealliance}/${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
container_name: rfsim5g-oai-cuup2
cap_drop:
- ALL
@@ -165,7 +165,7 @@ services:
retries: 5
oai-cuup3:
image: ${REGISTRY:-oaisoftwarealliance}/${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
container_name: rfsim5g-oai-cuup3
cap_drop:
- ALL
@@ -199,7 +199,7 @@ services:
retries: 5
oai-du:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-du
cap_drop:
- ALL
@@ -230,7 +230,7 @@ services:
retries: 5
oai-du2:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-du2
cap_drop:
- ALL
@@ -264,7 +264,7 @@ services:
retries: 5
oai-du3:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-du3
cap_drop:
- ALL
@@ -298,7 +298,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL
@@ -328,7 +328,7 @@ services:
retries: 5
oai-nr-ue2:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue2
cap_drop:
- ALL
@@ -358,7 +358,7 @@ services:
retries: 5
oai-nr-ue3:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue3
cap_drop:
- ALL

View File

@@ -1,6 +1,6 @@
services:
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -25,7 +25,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -1,6 +1,6 @@
services:
oai-flexric:
image: ${REGISTRY:-oaisoftwarealliance}/oai-flexric:${FLEXRIC_TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-flexric:${FLEXRIC_TAG:-develop}
container_name: oai-flexric
networks:
public_net:
@@ -13,7 +13,7 @@ services:
timeout: 5s
xapp-rc-moni:
image: ${REGISTRY:-oaisoftwarealliance}/oai-flexric:${FLEXRIC_TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-flexric:${FLEXRIC_TAG:-develop}
command: "stdbuf -o0 /usr/local/flexric/xApp/c/monitor/xapp_rc_moni"
container_name: xapp-rc-moni
depends_on:
@@ -30,7 +30,7 @@ services:
timeout: 5s
xapp-kpm-moni:
image: ${REGISTRY:-oaisoftwarealliance}/oai-flexric:${FLEXRIC_TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-flexric:${FLEXRIC_TAG:-develop}
command: "stdbuf -o0 /usr/local/flexric/xApp/c/monitor/xapp_kpm_moni"
container_name: xapp-kpm-moni
depends_on:
@@ -47,7 +47,7 @@ services:
timeout: 5s
xapp-kpm-rc:
image: ${REGISTRY:-oaisoftwarealliance}/oai-flexric:${FLEXRIC_TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-flexric:${FLEXRIC_TAG:-develop}
command: "stdbuf -o0 /usr/local/flexric/xApp/c/kpm_rc/xapp_kpm_rc"
container_name: xapp-kpm-rc
depends_on:
@@ -64,7 +64,7 @@ services:
timeout: 5s
xapp-gtp-mac-rlc-pdcp-moni:
image: ${REGISTRY:-oaisoftwarealliance}/oai-flexric:${FLEXRIC_TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-flexric:${FLEXRIC_TAG:-develop}
command: "stdbuf -o0 /usr/local/flexric/xApp/c/monitor/xapp_gtp_mac_rlc_pdcp_moni"
container_name: xapp-gtp-mac-rlc-pdcp-moni
depends_on:
@@ -81,7 +81,7 @@ services:
timeout: 5s
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
privileged: true
container_name: rfsim5g-oai-gnb
environment:
@@ -101,7 +101,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
privileged: true
container_name: rfsim5g-oai-nr-ue
environment:
@@ -120,7 +120,7 @@ services:
retries: 5
oai-nr-ue2:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
privileged: true
container_name: rfsim5g-oai-nr-ue2
environment:

View File

@@ -91,7 +91,7 @@ services:
retries: 5
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -112,7 +112,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -83,7 +83,7 @@ services:
timeout: 5s
retries: 5
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -103,7 +103,7 @@ services:
timeout: 5s
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -84,7 +84,7 @@ services:
retries: 5
oai-cucp-0:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-cucp-0
cap_drop:
- ALL
@@ -111,7 +111,7 @@ services:
retries: 5
oai-cuup-0:
image: ${REGISTRY:-oaisoftwarealliance}/${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
container_name: rfsim5g-oai-cuup-0
cap_drop:
- ALL
@@ -139,7 +139,7 @@ services:
oai-du-0:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-du-0
cap_drop:
- ALL
@@ -150,7 +150,6 @@ services:
--telnetsrv --telnetsrv.listenaddr 192.168.71.171
--telnetsrv.shrmod ci
--rfsimulator.serveraddr 192.168.71.190
--gNBs.[0].servingCellConfigCommon.[0].ra_ResponseWindow 5
ASAN_OPTIONS: detect_leaks=0:detect_odr_violation=0
depends_on:
- oai-cucp-0
@@ -169,7 +168,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL
@@ -195,7 +194,7 @@ services:
retries: 5
oai-cucp-1:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-cucp-1
cap_drop:
- ALL
@@ -227,7 +226,7 @@ services:
retries: 5
oai-cuup-1:
image: ${REGISTRY:-oaisoftwarealliance}/${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRCUUP_IMG:-oai-nr-cuup}:${TAG:-develop}
container_name: rfsim5g-oai-cuup-1
cap_drop:
- ALL
@@ -254,7 +253,7 @@ services:
retries: 5
oai-du-1:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-du-1
cap_drop:
- ALL

View File

@@ -90,7 +90,7 @@ services:
timeout: 5s
retries: 5
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -115,7 +115,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -87,7 +87,7 @@ services:
timeout: 5s
retries: 5
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -110,7 +110,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -1,6 +1,6 @@
services:
oai-nr-ue-1:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue-1
cap_drop:
- ALL
@@ -25,7 +25,7 @@ services:
retries: 5
oai-nr-ue-2:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue-2
cap_drop:
- ALL

View File

@@ -1,6 +1,6 @@
services:
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
@@ -25,7 +25,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -91,7 +91,7 @@ services:
retries: 5
oai-vnf:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-vnf
cap_drop:
- ALL
@@ -115,7 +115,7 @@ services:
retries: 5
oai-pnf:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: rfsim5g-oai-pnf
cap_drop:
- ALL
@@ -139,7 +139,7 @@ services:
retries: 5
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL

View File

@@ -1,6 +1,6 @@
services:
oai_cu:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
oai-cu:
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: oai-cu
cap_drop:
- ALL
@@ -25,8 +25,8 @@ services:
timeout: 5s
retries: 5
oai_du0:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
oai-du0:
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: oai-du0
cap_drop:
- ALL
@@ -57,8 +57,8 @@ services:
timeout: 5s
retries: 5
oai_du1:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
oai-du1:
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: oai-du1
cap_drop:
- ALL

View File

@@ -0,0 +1,61 @@
services:
oai-gnb-pci0:
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: oai-gnb-pci0
cap_drop:
- ALL
cap_add:
- SYS_NICE
- IPC_LOCK
ulimits:
core: -1 # for core dumps
environment:
USE_B2XX: 'yes'
USE_ADDITIONAL_OPTIONS: --RUs.[0].sdr_addrs serial=30AD30F
--telnetsrv --telnetsrv.shrmod ci
--log_config.global_log_options level,nocolor,utc_time,line_num,function
ASAN_OPTIONS: detect_leaks=0:detect_odr_violation=0
devices:
- /dev/bus/usb/:/dev/bus/usb/
volumes:
- ../../conf_files/neighbour-config-ho.conf:/opt/oai-gnb/etc/neighbour-config-ho.conf
- ../../conf_files/gnb.sa.band77.51prb.usrpb200.n2-ho.conf:/opt/oai-gnb/etc/gnb.conf
network_mode: "host"
healthcheck:
test: /bin/bash -c "ps aux | grep -v grep | grep -c softmodem"
interval: 10s
timeout: 5s
retries: 5
oai-gnb-pci1:
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
container_name: oai-gnb-pci1
cap_drop:
- ALL
cap_add:
- SYS_NICE
- IPC_LOCK
ulimits:
core: -1 # for core dumps
environment:
USE_B2XX: 'yes'
USE_ADDITIONAL_OPTIONS: --RUs.[0].sdr_addrs serial=31F8010
--gNBs.[0].nr_cellid 11111111
--gNBs.[0].gNB_ID 0xe01
--gNBs.[0].servingCellConfigCommon.[0].physCellId 1
--gNBs.[0].servingCellConfigCommon.[0].ssb_PositionsInBurst_Bitmap 2
--gNBs.[0].NETWORK_INTERFACES.GNB_IPV4_ADDRESS_FOR_NG_AMF 172.21.19.99
--gNBs.[0].NETWORK_INTERFACES.GNB_IPV4_ADDRESS_FOR_NGU 172.21.19.99
--telnetsrv --telnetsrv.shrmod ci
--log_config.global_log_options level,nocolor,utc_time,line_num,function
devices:
- /dev/bus/usb/:/dev/bus/usb/
volumes:
- ../../conf_files/neighbour-config-ho.conf:/opt/oai-gnb/etc/neighbour-config-ho.conf
- ../../conf_files/gnb.sa.band77.51prb.usrpb200.n2-ho.conf:/opt/oai-gnb/etc/gnb.conf
network_mode: "host"
healthcheck:
test: /bin/bash -c "ps aux | grep -v grep | grep -c softmodem"
interval: 10s
timeout: 5s
retries: 5

View File

@@ -1,6 +1,6 @@
services:
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
network_mode: "host"
container_name: oai-gnb
cap_drop:

View File

@@ -1,6 +1,6 @@
services:
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
network_mode: "host"
container_name: oai-gnb
cap_drop:

View File

@@ -1,6 +1,6 @@
services:
oai-vnf:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
network_mode: "host"
container_name: oai-vnf
cap_drop:
@@ -20,7 +20,7 @@ services:
timeout: 5s
retries: 5
oai-pnf:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
network_mode: "host"
container_name: oai-pnf
cap_drop:

View File

@@ -1,6 +1,6 @@
services:
oai-gnb:
image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
network_mode: "host"
container_name: oai-gnb
cap_drop:

View File

@@ -1,6 +1,6 @@
services:
oai-nr-ue:
image: ${REGISTRY:-oaisoftwarealliance}/${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}${NRUE_IMG:-oai-nr-ue}:${TAG:-develop}
network_mode: host
container_name: oai-nr-ue
cap_drop:
@@ -17,7 +17,7 @@ services:
#entrypoint: /bin/bash -c "sleep infinity"
environment:
TZ: Europe/Paris
USE_ADDITIONAL_OPTIONS: --usrp-args type=n3xx,name=ni-n3xx-31641B9,addr=192.168.10.2 -r 106 --numerology 1 --band 78 -C 3425010000 --ssb 509 --ue-fo-compensation --ue-rxgain 65 --tune-offset 20000000 -A 90 --log_config.global_log_options level,nocolor,time --uicc0.imsi 001020000000111 --uicc0.nssai_sd 16777215
USE_ADDITIONAL_OPTIONS: --usrp-args type=n3xx,name=ni-n3xx-31641B9,addr=192.168.10.2 -r 106 --numerology 1 --band 78 -C 3425010000 --ssb 509 --ue-fo-compensation --ue-rxgain 65 --tune-offset 20000000 -A 90 --log_config.global_log_options level,nocolor,time --uicc0.imsi 001020000000111
volumes:
- ../../conf_files/ue.sa.conf:/opt/oai-nr-ue/etc/nr-ue.conf
healthcheck:

View File

@@ -1,6 +1,6 @@
services:
enb_mono_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: prod-enb-mono-fdd
environment:

View File

@@ -1,6 +1,6 @@
services:
rru_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-rru-fdd-05Mhz-tm1
network_mode: "host"
@@ -17,7 +17,7 @@ services:
timeout: 5s
retries: 5
rcc_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-rcc-fdd-05Mhz-tm1
network_mode: "host"

View File

@@ -1,6 +1,6 @@
services:
enb_mono_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-enb-fdd-05Mhz-tm1
environment:

View File

@@ -1,6 +1,6 @@
services:
enb_mono_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-enb-fdd-05Mhz-tm1
environment:

View File

@@ -1,6 +1,6 @@
services:
lte_ue0:
image: ${REGISTRY:-oaisoftwarealliance}/oai-lte-ue:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-lte-ue:${TAG:-develop}
privileged: true
container_name: lte-b200-ue-fdd-10Mhz-tm1
environment:

View File

@@ -1,6 +1,6 @@
services:
enb_mono_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-enb-fdd-10Mhz-tm1
environment:

View File

@@ -1,6 +1,6 @@
services:
enb_mono_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-enb-fdd-10Mhz-tm1
environment:

View File

@@ -1,6 +1,6 @@
services:
enb_mono_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-enb-fdd-10Mhz-tm1
environment:

View File

@@ -1,6 +1,6 @@
services:
enb_mono_fdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-enb-fdd-20Mhz-tm1
environment:

View File

@@ -1,6 +1,6 @@
services:
rru_tdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-rru-tdd-05Mhz-tm1
network_mode: "host"
@@ -17,7 +17,7 @@ services:
timeout: 5s
retries: 5
rcc_tdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-rcc-tdd-05Mhz-tm1
network_mode: "host"

View File

@@ -1,6 +1,6 @@
services:
enb_mono_tdd:
image: ${REGISTRY:-oaisoftwarealliance}/oai-enb:${TAG:-develop}
image: ${REGISTRY-oaisoftwarealliance/}oai-enb:${TAG:-develop}
privileged: true
container_name: lte-b200-enb-tdd-05Mhz-tm1
environment:

Some files were not shown because too many files have changed in this diff Show More