Changes till Reconfig Complete

changes-1

changes-2 -2 may

changes 3- 2 may

changes-4 may3

changes - added handler file- may3

changes 5 -may3

changes-6-may6

Xn Setup - May 7

Xn Response tai support

Served cell info TAC

Served cell TAC

Served cell TAC - May 8

Handover

Xn Handover request/ack- split

F1 code - Part 1

UE Context Setup REQ/RESP

UE context setup req/resp

UE context setup req/resp changes

UE Context setup req/resp final

.gitignore

@@ -5,6 +5,7 @@
 cmake_targets/log/
 cmake_targets/*/build/
 cmake_targets/ran_build/
+cmake_targets/nas_sim_tools/build/
 log/
 lte_build_oai/
 
@@ -24,4 +25,3 @@ tags
 nfapi_nr_interface_scf
 *.log
 *.out
-CMakeUserPresets.json

CHANGELOG.md

@@ -1,61 +1,5 @@
 # RELEASE NOTES: #
 
-## [v2.2.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.2.0) -> November 2024. ##
-
-General 5G improvements (both gNB and UE):
-- Make standalone mode (SA) the default (see [`RUNMODEM.md`](doc/RUNMODEM.md))
-- Experimental support for FR2 operation
-- Support for GEO NTN and simulation of GEO satellite channel in RFsimulator
-  (see [`RUNMODEM.md`](doc/RUNMODEM.md))
-- Support 2-step RA
-- Add optional LTTng logger in logging module (see
-  [`lttng_logs.md`](common/utils/LOG/DOC/lttng_logs.md))
-- Support for YAML-based config files (alongside libconfig) (see
-  [`gnb.sa.band78.106prb.rfsim.yaml`](ci-scripts/conf_files/gnb.sa.band78.106prb.rfsim.yaml) and
-  [`nrue.uicc.yaml`](ci-scripts/conf_files/nrue.uicc.yaml))
-- Add new L1 scope based on Dear ImGui (see [`readme.md`](openair1/PHY/TOOLS/readme.md))
-- Allow cross-compilation on ARM (via SIMDE SIMD emulation library)
-- Allow to build and run with clang
-- Support/check for Linux capabilities, allow to run without sudo (see
-  [`tuning_and_security.md`](doc/tuning_and_security.md))
-- OAI does not modify CPU frequency and networking stack
-  ([`tuning_and_security.md`](doc/tuning_and_security.md))
-- Bugfixes in the entire stack (e.g.  #547, #663, #674, #687, #712, #736, #739,
-  #741, #756, #762, #773, ...)
-
-5G gNB:
-- Support for FR2 interoperability with COTS UE (no beam switching supported yet)
-- Add 4-layer DL MIMO (experimental)
-- Add gNB Neighbour configuration and Mobility over F1 interface (see
-  [`handover-tutorial.md`](doc/handover-tutorial.md))
-- Enhance O-RAN FHI 7.2: (see [`ORAN_FHI7.2_Tutorial.md`](doc/ORAN_FHI7.2_Tutorial.md))
-  * Support different bandwidths (40/60/80/100MHz) and antenna configs (1x1 up
-    to 4x4) for Benetel/VVDN/LITEON RUs
-  * Add support for multi-RU support (single-cell/distributed antenna)
-- Support AMD T2 Telco card look-aside L1 accelerator (see
-  [`LDPC_T2_OFFLOAD_SETUP.md`](doc/LDPC_T2_OFFLOAD_SETUP.md))
-- Support Nvidia Aerial/ARC in-line L1 accelerator (see
-  [`Aerial_FAPI_Split_Tutorial.md`](doc/Aerial_FAPI_Split_Tutorial.md))
-- Various fixes for multi-UE operation: by default support of up to 16 UEs concurrently
-- Documentation for
-  - 5G MAC (see [`mac-usage.md`](doc/MAC/mac-usage.md))
-  - 5G RRC (see [`rrc-usage.md`](doc/RRC/rrc-usage.md))
-  - E1 (see [`E1-design.md`](doc/E1AP/E1-design.md))
-  - F1 (see [`F1-design.md`](doc/F1AP/F1-design.md))
-
-5G UE:
-- Basic interoperability with COTS gNB (Nokia gNB)
-- Implement PHR reporting
-- Implement RRC re-establishment
-- Implement PUCCH/PUSCH/SRS power control
-- Implement UCI on PUSCH and aperiodic CSI reporting
-- Support of cell search (within the selected UE bandwidth) (see [`RUNMODEM.md`](doc/RUNMODEM.md))
-- Enhance connection control: implement timers, resync
-- A lot of internal cleanup
-
-This release also includes many fixes and documentation updates. See
-`doc/README.md` in the repository for an overview of documentation.
-
 ## [v2.1.0](https://gitlab.eurecom.fr/oai/openairinterface5g/-/tags/v2.1.0) -> February 2024. ##
 
 This release improves existing 5G support and adds various new features.

CMakePresets.json

@@ -1,64 +0,0 @@
-{
-    "version": 3,
-    "configurePresets": [
-        {
-            "name": "default",
-            "displayName": "Default Config",
-            "description": "Default build using Ninja generator",
-            "generator": "Ninja",
-            "binaryDir": "${sourceDir}/cmake_targets/ran_build/build",
-            "cacheVariables": {
-                "CMAKE_BUILD_TYPE": "RelWithDebInfo"
-            }
-        },
-        {
-            "name": "tests",
-            "displayName": "Default unit test config",
-            "inherits": "default",
-            "binaryDir": "${sourceDir}/cmake_targets/ran_build/build_test",
-            "cacheVariables": {
-                "ENABLE_TESTS": "ON",
-                "SANITIZE_ADDRESS": "ON",
-                "CMAKE_BUILD_TYPE": "RelWithDebInfo"
-            }
-        }
-    ],
-    "buildPresets": [
-        {
-            "name": "5gdefault",
-            "configurePreset": "default",
-            "targets": [
-                "nr-uesoftmodem",
-                "nr-softmodem",
-                "rfsimulator",
-                "dfts",
-                "ldpc",
-                "params_libconfig",
-                "params_yaml"
-            ]
-        },
-        {
-            "name": "default",
-            "inherits": "5gdefault"
-        },
-        {
-            "name": "4gdefault",
-            "configurePreset": "default",
-            "targets": [
-                "lte-softmodem",
-                "lte-uesoftmodem",
-                "dfts",
-                "coding",
-                "rfsimulator",
-                "params_libconfig"
-            ]
-        },
-        {
-            "name": "tests",
-            "configurePreset": "tests",
-            "targets": [
-                "tests"
-            ]
-        }
-    ]
-}

NOTICE.md

@@ -4,6 +4,15 @@ For more details of the license, refer to [LICENSE](LICENSE) file in the same di
 
 However, the source code also contains third party software that is acknowledged here for reference.
 
+## Credits for LFDS user space source code located in folder openair2/UTILS/LFDS/ ##
+
+See on [liblfds website](https://liblfds.org/) the license section.
+
+<pre>
+"There is no license. You are free to use this software in any way, for any purpose. Go forth and create wealth!
+If however for legal reasons a licence is required, the license of your choice will be granted."
+</pre>
+
 ## Credits for source code common/utils/collection/queue.h: ##
 
 The Regents of the University of California: BSD 3-Clause Licence.

README.md

@@ -4,10 +4,12 @@
 
 <p align="center">
     <a href="https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/master/LICENSE"><img src="https://img.shields.io/badge/license-OAI--Public--V1.1-blue" alt="License"></a>
+    <a href="https://releases.ubuntu.com/18.04/"><img src="https://img.shields.io/badge/OS-Ubuntu18-Green" alt="Supported OS Ubuntu 18"></a>
+    <a href="https://releases.ubuntu.com/20.04/"><img src="https://img.shields.io/badge/OS-Ubuntu20-Green" alt="Supported OS Ubuntu 20"></a>
     <a href="https://releases.ubuntu.com/22.04/"><img src="https://img.shields.io/badge/OS-Ubuntu22-Green" alt="Supported OS Ubuntu 22"></a>
-    <a href="https://releases.ubuntu.com/24.04/"><img src="https://img.shields.io/badge/OS-Ubuntu24-Green" alt="Supported OS Ubuntu 24"></a>
-    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RHEL9"></a>
-    <a href="https://getfedora.org/en/workstation/"><img src="https://img.shields.io/badge/OS-Fedore41-Green" alt="Supported OS Fedora 41"></a>
+    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL8-Green" alt="Supported OS RHEL8"></a>
+    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RELH9"></a>
+    <a href="https://getfedora.org/en/workstation/"><img src="https://img.shields.io/badge/OS-Fedore37-Green" alt="Supported OS Fedora 37"></a>
 </p>
 
 <p align="center">
@@ -15,9 +17,7 @@
 </p>
 
 <p align="center">
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu18-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu18-Image-Builder%2F&label=build-Ubuntu-x86%20Images"></a>
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-RHEL8-Cluster-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-RHEL8-Cluster-Image-Builder%2F&label=build-UBI-x86%20Images"></a>
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu-ARM-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu-ARM-Image-Builder%2F&label=build-Ubuntu-ARM%20Images"></a>
+    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Container-Parent/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Container-Parent%2F&label=build%20Images"></a>
 </p>
 
 <p align="center">
@@ -43,7 +43,6 @@ Please see [NOTICE](NOTICE.md) file for third party software that is included in
 
  *  [General overview of documentation](./doc/README.md)
  *  [The implemented features](./doc/FEATURE_SET.md)
- *  [System Requirements for Using OAI Stack](./doc/system_requirements.md)
  *  [How to build](./doc/BUILD.md)
  *  [How to run the modems](./doc/RUNMODEM.md)
 
@@ -71,13 +70,12 @@ openairinterface5g
 ├── executables       : Top-level executable source files (gNB, eNB, ...)
 ├── maketags          : Script to generate emacs tags.
 ├── nfapi             : (n)FAPI code for MAC-PHY interface
-├── openair1          : Layer 1 (3GPP LTE Rel-10/12 PHY, NR Rel-15 PHY)
-├── openair2          : Layer 2 (3GPP LTE Rel-10 MAC/RLC/PDCP/RRC/X2AP, LTE Rel-14 M2AP, NR Rel-15+ MAC/RLC/PDCP/SDAP/RRC/X2AP/F1AP/E1AP), E2AP
-├── openair3          : Layer 3 (3GPP LTE Rel-10 S1AP/GTP, NR Rel-15 NGAP/GTP)
+├── openair1          : 3GPP LTE Rel-10/12 PHY layer / 3GPP NR Rel-15 layer. A local Readme file provides more details.
+├── openair2          : 3GPP LTE Rel-10 RLC/MAC/PDCP/RRC/X2AP + LTE Rel-14 M2AP implementation. Also 3GPP NR Rel-15 RLC/MAC/PDCP/RRC/X2AP.
+├── openair3          : 3GPP LTE Rel10 for S1AP, NAS GTPV1-U for both ENB and UE.
 ├── openshift         : OpenShift helm charts for some deployment options of OAI
-├── radio             : Drivers for various radios such as USRP, AW2S, RFsim, 7.2 FHI, ...
-├── targets           : Some configuration files; only historical relevance, and might be deleted in the future
-└── tools             : Tools for use by the developers/ci machines: code analysis and formatting
+├── radio             : Drivers for various radios such as USRP, AW2S, RFsim, ...
+└── targets           : Some configuration files; only historical relevance, and might be deleted in the future
 ```
 
 # How to get support from the OAI Community # 

charts/physims-4g/values.yaml

@@ -1,21 +0,0 @@
-# Default values for oai-physim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global:
-  serviceAccountName: oai-physim-sa
-  namespace: "OAICICD_PROJECT"
-  image:
-    registry: local
-    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-core-for-ci-ran/oai-physim
-    version: TAG
-    # pullPolicy: IfNotPresent or Never or Always
-    pullPolicy: Always
-  # removing the node selector
-  # will place on two nodes intel 3rd gen and 5th gen with RT kernel
-  nodeSelector:
-    type: ran
-  nodeName: ''
-  resources:
-    define: false
-    requests:
-      cpu: 1.5

charts/physims-5g/templates/rbac.yaml

@@ -1,26 +0,0 @@
-apiVersion: rbac.authorization.k8s.io/v1
-kind: Role
-metadata:
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
-rules:
-- apiGroups:
-  - security.openshift.io
-  resourceNames:
-  - anyuid
-  resources:
-  - securitycontextconstraints
-  verbs:
-  - use
----
-apiVersion: rbac.authorization.k8s.io/v1
-kind: RoleBinding
-metadata:
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-binding
-subjects:
-- kind: ServiceAccount
-  name: {{ .Values.global.serviceAccountName }}
-  namespace: {{ .Release.Namespace }}
-roleRef:
-  kind: Role
-  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
-  apiGroup: rbac.authorization.k8s.io

charts/physims-5g/templates/serviceaccount.yaml

@@ -1,4 +0,0 @@
-apiVersion: v1
-kind: ServiceAccount
-metadata:
-  name: oai-physim-sa #{{ .Values.global.serviceAccountName }}

charts/physims-5g/values.yaml

@@ -1,21 +0,0 @@
-# Default values for oai-physim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global:
-  serviceAccountName: oai-physim-sa
-  namespace: "OAICICD_PROJECT"
-  image:
-    registry: local
-    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-core-for-ci-ran/oai-physim
-    version: TAG
-    # pullPolicy: IfNotPresent or Never or Always
-    pullPolicy: Always
-  # removing the node selector
-  # will place on two nodes intel 3rd gen and 5th gen with RT kernel
-  nodeSelector:
-    type: ran
-  nodeName: ''
-  resources:
-    define: false
-    requests:
-      cpu: 1.5

charts/physims/charts/dlsim.100rb+tm2/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-dlsim-100rb-tm2
+description: A Helm subchart for dlsim network function ("100rb+tm2" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - dlsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim.100rb+tm2/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-dlsim-100rb-tm2.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-dlsim-100rb-tm2.labels" -}}
+helm.sh/chart: {{ include "oai-dlsim-100rb-tm2.chart" . }}
+{{ include "oai-dlsim-100rb-tm2.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-dlsim-100rb-tm2.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-dlsim-100rb-tm2.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-dlsim-100rb-tm2.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-dlsim-100rb-tm2.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/dlsim.100rb+tm2/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -31,9 +26,8 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          ctest -R 5g --show-only=json-v1 >> physims-5g-tests.json &&
-          ctest -R 5g -j$(nproc) --output-junit physims-5g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
-          echo "FINISHED" && sleep 20
+          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.100rb+tm2" -d bin/ &&
+          echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -43,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.physims5g }}
+      {{- if .Values.global.nodeName.dlsim100rbtm2}}
+      nodeName: {{ .Values.global.nodeName.dlsim100rbtm2 }}
       {{- end }}

charts/physims/charts/dlsim.100rb+tm2/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-dlsim-100rb+tm2
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-dlsim-100rb-tm2"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/dlsim.basic/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-dlsim-basic
+description: A Helm subchart for dlsim network function ("basic" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - dlsim
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/dlsim.basic/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-dlsim-basic.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-dlsim-basic.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-dlsim-basic.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-dlsim-basic.labels" -}}
+helm.sh/chart: {{ include "oai-dlsim-basic.chart" . }}
+{{ include "oai-dlsim-basic.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-dlsim-basic.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-dlsim-basic.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-dlsim-basic.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/dlsim.basic/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}    
+spec:
+  template:
+    metadata:
+      labels:
+         app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.basic" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }} 
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.dlsimbasic}}
+      nodeName: {{ .Values.global.nodeName.dlsimbasic }}
+      {{- end }}

charts/physims/charts/dlsim.basic/values.yaml

@@ -0,0 +1,44 @@
+# Default values for oai-dlsim-basic
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-dlsim-basic"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources:
+   limits:
+     cpu: 100m
+     memory: 128Mi
+   requests:
+     cpu: 100m
+     memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ldpctest/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physims-5g
-description: A Helm subchart for 5G physims network function
+name: oai-ldpctest
+description: A Helm subchart for ldpctest network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,6 +24,7 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
+  - ldpctest
   - RAN
   - 5G
 

charts/physims/charts/ldpctest/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-physims-5g.name" -}}
+{{- define "oai-ldpctest.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-physims-5g.fullname" -}}
+{{- define "oai-ldpctest.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-physims-5g.chart" -}}
+{{- define "oai-ldpctest.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-physims-5g.labels" -}}
-helm.sh/chart: {{ include "oai-physims-5g.chart" . }}
-{{ include "oai-physims-5g.selectorLabels" . }}
+{{- define "oai-ldpctest.labels" -}}
+helm.sh/chart: {{ include "oai-ldpctest.chart" . }}
+{{ include "oai-ldpctest.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-physims-5g.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-physims-5g.name" . }}
+{{- define "oai-ldpctest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ldpctest.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-physims-5g.serviceAccountName" -}}
+{{- define "oai-ldpctest.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-physims-5g.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-ldpctest.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims/charts/ldpctest/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -31,9 +26,8 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          ctest -R 4g --show-only=json-v1 >> physims-4g-tests.json &&
-          ctest -R 4g -j$(nproc) --output-junit physims-4g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
-          echo "FINISHED" && sleep 15
+          cmake_targets/autotests/run_exec_autotests.bash -g "ldpctest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -43,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.physims5g }}
+      {{- if .Values.global.nodeName.ldpctest}}
+      nodeName: {{ .Values.global.nodeName.ldpctest }}
       {{- end }}

charts/physims/charts/ldpctest/values.yaml

@@ -1,4 +1,4 @@
-# Default values for oai-physims-4g
+# Default values for oai-ldpctest.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
@@ -20,7 +20,7 @@ serviceAccount:
   annotations: {}
   # The name of the service account to use.
   # If not set and create is true, a name is generated using the fullname template
-  name: "oai-physims-4g"
+  name: "oai-ldpctest-sa"
 
 podSecurityContext:
   runAsUser: 0

charts/physims/charts/nr-dlschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlschsim
+description: A Helm subchart for nr-dlschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlschsim.chart" . }}
+{{ include "oai-nr-dlschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlschsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlschsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlschsim}}
+      nodeName: {{ .Values.global.nodeName.nrdlschsim }}
+      {{- end }}

charts/physims/charts/nr-dlschsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.basic/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-basic
+description: A Helm subchart for nr-dlsim network function ("basic" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.basic/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-basic.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-basic.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-basic.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-basic.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-basic.chart" . }}
+{{ include "oai-nr-dlsim-basic.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-basic.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-basic.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-basic.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.basic/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.basic" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimbasic}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimbasic }}
+      {{- end }}

charts/physims/charts/nr-dlsim.basic/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-basic
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-basic"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.dmrs+ptrs/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-dmrs-ptrs
+description: A Helm subchart for nr-dlsim network function ("dmrs+ptrs" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-dmrs-ptrs.chart" . }}
+{{ include "oai-nr-dlsim-dmrs-ptrs.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-dmrs-ptrs.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-dmrs-ptrs.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-dmrs-ptrs.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.dmrs+ptrs" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimdmrsptrs}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimdmrsptrs }}
+      {{- end }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-dmrs+ptrs
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-dmrs-ptrs"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.mcs+mimo/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-mcs-mimo
+description: A Helm subchart for nr-dlsim network function ("mcs+mimo" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.mcs+mimo/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-mcs-mimo.chart" . }}
+{{ include "oai-nr-dlsim-mcs-mimo.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-mcs-mimo.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-mcs-mimo.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-mcs-mimo.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.mcs+mimo/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.mcs+mimo" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimmcsmimo}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimmcsmimo }}
+      {{- end }}

charts/physims/charts/nr-dlsim.mcs+mimo/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-mcs-mimo
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-mcs-mimo"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-dlsim.offset/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-dlsim-offset
+description: A Helm subchart for nr-dlsim network function ("offset" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-dlsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.offset/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-dlsim-offset.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-dlsim-offset.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-dlsim-offset.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-dlsim-offset.labels" -}}
+helm.sh/chart: {{ include "oai-nr-dlsim-offset.chart" . }}
+{{ include "oai-nr-dlsim-offset.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-dlsim-offset.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-dlsim-offset.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-dlsim-offset.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-dlsim-offset.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-dlsim.offset/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.offset" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimoffset}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimoffset }}
+      {{- end }}

charts/physims/charts/nr-dlsim.offset/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-dlsim-offset
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-dlsim-offset"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.106rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-106rb
+description: A Helm subchart for nr-pbchsim network function ("106rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.106rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-106rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-106rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-106rb.chart" . }}
+{{ include "oai-nr-pbchsim-106rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-106rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-106rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-106rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-106rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.106rb/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.106rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbschsim106rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbschsim106rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.106rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-106rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-106rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.217rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-217rb
+description: A Helm subchart for nr-pbchsim network function ("217rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.217rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-217rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-217rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-217rb.chart" . }}
+{{ include "oai-nr-pbchsim-217rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-217rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-217rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-217rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-217rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.217rb/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.217rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbchsim217rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim217rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.217rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-217rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-217rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pbchsim.273rb/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pbchsim-273rb
+description: A Helm subchart for nr-pbchsim network function ("273rb" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.273rb/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pbchsim-273rb.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pbchsim-273rb.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pbchsim-273rb.chart" . }}
+{{ include "oai-nr-pbchsim-273rb.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pbchsim-273rb.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pbchsim-273rb.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pbchsim-273rb.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pbchsim-273rb.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pbchsim.273rb/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.273rb" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbchsim273rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.273rb/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-pbchsim-273rb
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pbchsim-273rb"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-prachsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-prachsim
+description: A Helm subchart for nr-prachsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-prachsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-prachsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-prachsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-prachsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-prachsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-prachsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-prachsim.chart" . }}
+{{ include "oai-nr-prachsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-prachsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-prachsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-prachsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-prachsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-prachsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_prachsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrprachsim}}
+      nodeName: {{ .Values.global.nodeName.nrprachsim }}
+      {{- end }}

charts/physims/charts/nr-prachsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-prachsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-prachsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-psbchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-psbchsim
+description: A Helm subchart for nr-psbchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-psbchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-psbchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-psbchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-psbchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-psbchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-psbchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-psbchsim.chart" . }}
+{{ include "oai-nr-psbchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-psbchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-psbchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-psbchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-psbchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-psbchsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_psbchsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpsbchsim}}
+      nodeName: {{ .Values.global.nodeName.nrpsbchsim }}
+      {{- end }}

charts/physims/charts/nr-psbchsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-psbchsim
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-psbchsim"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-pucchsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-pucchsim
+description: A Helm subchart for nr-pucchsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-pucchsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-pucchsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-pucchsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-pucchsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-pucchsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-pucchsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-pucchsim.chart" . }}
+{{ include "oai-nr-pucchsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-pucchsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-pucchsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-pucchsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-pucchsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-pucchsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pucchsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpucchsim}}
+      nodeName: {{ .Values.global.nodeName.nrpucchsim }}
+      {{- end }}

charts/physims/charts/nr-pucchsim/values.yaml

@@ -0,0 +1,52 @@
+# Default values for oai-nr-pucchsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-pucchsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+service:
+  type: ClusterIP
+  port: 80
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulschsim/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulschsim
+description: A Helm subchart for nr-ulschsim network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulschsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulschsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulschsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulschsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulschsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulschsim.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulschsim.chart" . }}
+{{ include "oai-nr-ulschsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulschsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulschsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulschsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulschsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulschsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulschsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulschsim}}
+      nodeName: {{ .Values.global.nodeName.nrulschsim }}
+      {{- end }}

charts/physims/charts/nr-ulschsim/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulschsim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulschsim-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.3gpp/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-3gpp
+description: A Helm subchart for nr-ulsim network function ("3gpp" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.3gpp/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-3gpp.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-3gpp.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-3gpp.chart" . }}
+{{ include "oai-nr-ulsim-3gpp.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-3gpp.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-3gpp.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-3gpp.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.3gpp/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.3gpp" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsim3gpp}}
+      nodeName: {{ .Values.global.nodeName.nrulsim3gpp }}
+      {{- end }}

charts/physims/charts/nr-ulsim.3gpp/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-3gpp
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-3gpp"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.mimo/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-mimo
+description: A Helm subchart for nr-ulsim network function ("mimo" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.mimo/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-mimo.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-mimo.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-mimo.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-mimo.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-mimo.chart" . }}
+{{ include "oai-nr-ulsim-mimo.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-mimo.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-mimo.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-mimo.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.mimo/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.mimo" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimmimo}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmimo }}
+      {{- end }}

charts/physims/charts/nr-ulsim.mimo/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-mimo
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-mimo"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.misc/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-misc
+description: A Helm subchart for nr-ulsim network function ("misc" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.misc/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-misc.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-misc.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-misc.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-misc.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-misc.chart" . }}
+{{ include "oai-nr-ulsim-misc.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-misc.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-misc.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-misc.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.misc/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.misc" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimmisc}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmisc }}
+      {{- end }}

charts/physims/charts/nr-ulsim.misc/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-misc
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-misc"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/nr-ulsim.sc-fdma/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-nr-ulsim-sc-fdma
+description: A Helm subchart for nr-ulsim network function ("sc-fdma" tests)
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - nr-ulsim
+  - RAN
+  - 5G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.sc-fdma/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.labels" -}}
+helm.sh/chart: {{ include "oai-nr-ulsim-sc-fdma.chart" . }}
+{{ include "oai-nr-ulsim-sc-fdma.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-nr-ulsim-sc-fdma.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-nr-ulsim-sc-fdma.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/nr-ulsim.sc-fdma/templates/job.yaml

@@ -0,0 +1,44 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        ports:
+        - containerPort: 80
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.sc-fdma" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimscfdma}}
+      nodeName: {{ .Values.global.nodeName.nrulsimscfdma }}
+      {{- end }}

charts/physims/charts/nr-ulsim.sc-fdma/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-nr-ulsim-sc-fdma
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-nr-ulsim-sc-fdma"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/polartest/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physim
-description: A Helm chart for physical simulators network function
+name: oai-polartest
+description: A Helm subchart for polartest network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -16,17 +16,17 @@ icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_fin
 
 # This is the chart version. This version number should be incremented each time you make changes
 # to the chart and its templates, including the app version.
-version: 1.0.0
+version: 0.1.1
 
 # This is the version number of the application being deployed. This version number should be
 # incremented each time you make changes to the application.
 appVersion: v1
 
 keywords:
-  - Physical Simulators
+  - Physical Simulator
+  - polartest
   - RAN
   - 4G
-  - 5G
 
 sources:
   - https://gitlab.eurecom.fr/oai/openairinterface5g

charts/physims/charts/polartest/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-physims-4g.name" -}}
+{{- define "oai-polartest.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-physims-4g.fullname" -}}
+{{- define "oai-polartest.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-physims-4g.chart" -}}
+{{- define "oai-polartest.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-physims-4g.labels" -}}
-helm.sh/chart: {{ include "oai-physims-4g.chart" . }}
-{{ include "oai-physims-4g.selectorLabels" . }}
+{{- define "oai-polartest.labels" -}}
+helm.sh/chart: {{ include "oai-polartest.chart" . }}
+{{ include "oai-polartest.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-physims-4g.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-physims-4g.name" . }}
+{{- define "oai-polartest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-polartest.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-physims-4g.serviceAccountName" -}}
+{{- define "oai-polartest.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-physims-4g.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-polartest.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims/charts/polartest/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "polartest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.polartest}}
+      nodeName: {{ .Values.global.nodeName.polartest }}
+      {{- end }}

charts/physims/charts/polartest/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-polartest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-polartest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/smallblocktest/Chart.yaml

@@ -0,0 +1,36 @@
+apiVersion: v1
+name: oai-smallblocktest
+description: A Helm subchart for smallblocktest network function
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+version: 0.1.1
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application.
+appVersion: v1
+
+keywords:
+  - Physical Simulator
+  - smallblocktest
+  - RAN
+  - 4G
+
+sources:
+  - https://gitlab.eurecom.fr/oai/openairinterface5g
+
+maintainers:
+  - name:  OPENAIRINTERFACE
+    email: contact@openairinterface.org

charts/physims/charts/smallblocktest/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-smallblocktest.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-smallblocktest.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-smallblocktest.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-smallblocktest.labels" -}}
+helm.sh/chart: {{ include "oai-smallblocktest.chart" . }}
+{{ include "oai-smallblocktest.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-smallblocktest.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-smallblocktest.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-smallblocktest.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-smallblocktest.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/smallblocktest/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "smallblocktest" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.smallblocktest}}
+      nodeName: {{ .Values.global.nodeName.smallblocktest }}
+      {{- end }}

charts/physims/charts/smallblocktest/values.yaml

@@ -0,0 +1,48 @@
+# Default values for oai-smallblocktest.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  # pullPolicy: IfNotPresent or Never or Always
+  pullPolicy: Always
+
+imagePullSecrets: []
+
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: "oai-smallblocktest-sa"
+
+podSecurityContext:
+  runAsUser: 0
+  runAsGroup: 0
+
+securityContext:
+  privileged: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

charts/physims/charts/ulsim/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-physims-4g
-description: A Helm subchart for 4G physims network function
+name: oai-ulsim
+description: A Helm subchart for ulsim network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,6 +24,7 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
+  - ulsim
   - RAN
   - 4G
 

charts/physims/charts/ulsim/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "oai-ulsim.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "oai-ulsim.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "oai-ulsim.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "oai-ulsim.labels" -}}
+helm.sh/chart: {{ include "oai-ulsim.chart" . }}
+{{ include "oai-ulsim.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "oai-ulsim.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-ulsim.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "oai-ulsim.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "oai-ulsim.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

charts/physims/charts/ulsim/templates/job.yaml

@@ -0,0 +1,42 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ .Chart.Name }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: physim
+    spec:
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+    {{- if .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      containers:
+      - name: physim
+        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+          {{- toYaml .Values.securityContext | nindent 12 }}
+        env:
+        - name: OPENAIR_DIR
+          value: /opt/oai-physim
+        command: ["/bin/sh", "-c"]
+        args:
+        - >
+          cmake_targets/autotests/run_exec_autotests.bash -g "ulsim" -d bin/ &&
+          echo "FINISHED" && sleep infinity
+      dnsPolicy: ClusterFirst
+      restartPolicy: Never
+      schedulerName: default-scheduler
+      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.ulsim}}
+      nodeName: {{ .Values.global.nodeName.ulsim }}
+      {{- end }}

charts/physims/charts/ulsim/values.yaml

@@ -1,4 +1,4 @@
-# Default values for oai-physims-5g
+# Default values for oai-ulsim.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
@@ -20,7 +20,7 @@ serviceAccount:
   annotations: {}
   # The name of the service account to use.
   # If not set and create is true, a name is generated using the fullname template
-  name: "oai-physims-5g"
+  name: "oai-ulsim-sa"
 
 podSecurityContext:
   runAsUser: 0