Added selected resource percentage support in pre-configurations

We have reverted the payload length based num_pssch_tx stats update because
on the receiver, the payload length information is not available at PHY
layer so we could not update the rx_ok based on payload length
information. Thats why tx stats and rx stats were not matching.

.gitmodules

@@ -0,0 +1,4 @@
+[submodule "openair2/E2AP/flexric"]
+	path = openair2/E2AP/flexric
+	url = https://gitlab.eurecom.fr/mosaic5g/flexric.git
+	branch = remotes/origin/mir_dev

ci-scripts/Jenkinsfile-GitLab-Container

@@ -36,7 +36,6 @@ pipeline {
     label nodeExecutor
   }
   options {
-    disableConcurrentBuilds()
     timestamps()
     gitLabConnection('OAI GitLab')
     ansiColor('xterm')
@@ -405,28 +404,86 @@ pipeline {
             }
           }
         }
-
-        //avra is offline, re-enable once it is available
-        //stage ("T1-Offload-Test") {
-        //  when { expression {do5Gtest} }
-        //  steps {
-        //    script {
-        //      triggerSlaveJob ('RAN-T1-Offload-Test', 'T1-Offload-Test')
-        //    }
-        //  }
-        //  post {
-        //    always {
-        //      script {
-        //        finalizeSlaveJob('RAN-T1-Offload-Test')
-        //      }
-        //    }
-        //    failure {
-        //      script {
-        //        currentBuild.result = 'FAILURE'
-        //      }
-        //    }
-        //  }
-        //}
+        stage ("SA-AW2S-CN5G") {
+          when { expression {do5Gtest} }
+          steps {
+            script {
+              triggerSlaveJob ('RAN-SA-AW2S-CN5G', 'SA-AW2S-CN5G')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-SA-AW2S-CN5G')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("Interop-F1") {
+          when { expression {do5Gtest} }
+          steps {
+            script {
+              triggerSlaveJob ('RAN-Interop-F1', 'Interop-F1')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-Interop-F1')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("Sanity-Check OAI-CN5G") {
+          when { expression {do5Gtest} }
+          steps {
+            script {
+              triggerCN5GSlaveJob ('OAI-CN5G-COTS-UE-Test', 'OAI-CN5G-COTS-UE-Test')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('OAI-CN5G-COTS-UE-Test')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("SA-OAIUE-CN5G") {
+          when { expression {do5Gtest} }
+          steps {
+            script {
+              triggerSlaveJob ('RAN-SA-OAIUE-CN5G', 'RAN-SA-OAIUE-CN5G')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-SA-OAIUE-CN5G')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
       }
     }
     stage ("DockerHub-Push") {
@@ -521,8 +578,36 @@ def triggerSlaveJob (jobName, gitlabStatusName) {
     if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
        echo "${jobName} Slave Job is OK"
     } else {
-       echo "${jobName} Slave Job is KO"
-       sh "ci-scripts/fail.sh"
+       error "${jobName} Slave Job is KO"
+    }
+  }
+}
+
+def triggerCN5GSlaveJob (jobName, gitlabStatusName) {
+  if ("MERGE".equals(env.gitlabActionType)) {
+    shortenShaOne = sh returnStdout: true, script: 'git log -1 --pretty=format:"%h" --abbrev=8 ' + env.gitlabMergeRequestLastCommit
+    shortenShaOne = shortenShaOne.trim()
+    fullRanTag = 'porcepix.sboai.cs.eurecom.fr/oai-gnb:' + env.gitlabSourceBranch + '-' + shortenShaOne
+  } else {
+    shortenShaOne = sh returnStdout: true, script: 'git log -1 --pretty=format:"%h" --abbrev=8 ' + env.GIT_COMMIT
+    shortenShaOne = shortenShaOne.trim()
+    fullRanTag = 'porcepix.sboai.cs.eurecom.fr/oai-gnb:develop-' + shortenShaOne
+  }
+  // Workaround for the "cancelled" GitLab pipeline notification
+  // The slave job is triggered with the propagate false so the following commands are executed
+  // Its status is now PASS/SUCCESS from a stage pipeline point of view
+  // localStatus variable MUST be analyzed to properly assess the status
+  localStatus = build job: jobName,
+    parameters: [
+      string(name: 'FULL_RAN_TAG', value: String.valueOf(fullRanTag))
+    ], propagate: false
+  localResult = localStatus.getResult()
+  echo "${jobName} Slave Job status is ${localResult}"
+  gitlabCommitStatus(name: gitlabStatusName) {
+    if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
+       echo "${jobName} Slave Job is OK"
+    } else {
+       error "${jobName} Slave Job is KO"
     }
   }
 }
@@ -551,15 +636,18 @@ def triggerSlaveJobNoGitLab (jobName) {
   if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
      echo "${jobName} Slave Job is OK"
   } else {
-     echo "${jobName} Slave Job is KO"
-     sh "ci-scripts/fail.sh"
+     error "${jobName} Slave Job is KO"
   }
 }
 
 def finalizeSlaveJob(jobName) {
   // In case of any non-success, we are retrieving the HTML report of the last completed
   // slave job. The only drop-back is that we may retrieve the HTML report of a previous build
-  fileName = "test_results-${jobName}.html"
+  if (jobName == 'OAI-CN5G-COTS-UE-Test') {
+    fileName = "test_results_oai_cn5g_cots_ue.html"
+  } else {
+    fileName = "test_results-${jobName}.html"
+  }
   if (!fileExists(fileName)) {
     copyArtifacts(projectName: jobName,
       filter: 'test_results*.html',

ci-scripts/Jenkinsfile-cluster

@@ -61,7 +61,6 @@ pipeline {
     label pythonExecutor
   }
   options {
-    disableConcurrentBuilds()
     timestamps()
     ansiColor('xterm')
     lock(extra: lockResources)
@@ -205,7 +204,9 @@ pipeline {
               for (xmlFile in myXmlTestSuite) {
                 if (fileExists(xmlFile)) {
                   try {
+                   timeout (time: 60, unit: 'MINUTES') {
                     sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --XMLTestFile=${xmlFile} --OCUserName=${OC_Username} --OCPassword=${OC_Password} --OCProjectName=${OC_ProjectName}"
+                   }
                   } catch (Exception e) {
                     currentBuild.result = 'FAILURE'
                     buildStageStatus = false

ci-scripts/Jenkinsfile-nrue

@@ -0,0 +1,244 @@
+#!/bin/groovy
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+// Location of the executor node
+def pythonExecutor = params.pythonExecutor
+
+// Location of the test XML file to be run
+def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
+
+// Name of the test stage
+def testStageName = params.pipelineTestStageName
+
+// Name of the resource
+def lockResources = []
+if (params.LockResources != null && params.LockResources.trim().length() > 0)
+  params.LockResources.trim().split(",").each{lockResources += [resource: it.trim()]}
+
+// Global Parameters. Normally they should be populated when the master job
+// triggers the slave job with parameters
+def eNB_Repository
+def eNB_Branch
+def eNB_CommitID
+def eNB_AllowMergeRequestProcess = false
+def eNB_TargetBranch
+
+// Flags
+def scmEvent = false
+def upstreamEvent = false
+
+//-------------------------------------------------------------------------------
+// Pipeline start
+pipeline {
+  agent {
+    label pythonExecutor
+  }
+  options {
+    timestamps()
+    ansiColor('xterm')
+    lock(extra: lockResources)
+  }
+
+  stages {
+    stage ('Verify Parameters') {
+      steps {
+        script {
+          echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
+
+          JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"'
+          JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
+
+          def allParametersPresent = true
+
+          // It is already to late to check it
+          if (params.pythonExecutor != null) {
+            echo "eNB CI executor node  :   ${pythonExecutor}"
+          }
+          // If not present picking a default Stage Name
+          if (params.pipelineTestStageName == null) {
+            // picking default
+            testStageName = 'Template Test Stage'
+          }
+          if (params.LockResources == null) {
+            echo "no LockResources given"
+            allParametersPresent = false
+          }
+          if (params.eNB_IPAddress == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB_SourceCodePath == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB_Credentials == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB1_IPAddress == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB1_SourceCodePath == null) {
+            allParametersPresent = false
+          }
+          if (params.eNB1_Credentials == null) {
+            allParametersPresent = false
+          }
+          // the following 4 parameters should be pushed by the master trigger
+          // if not present, take the job GIT variables (used for developing)
+          if (params.eNB_Repository == null) {
+            eNB_Repository = env.GIT_URL
+          } else {
+            eNB_Repository = params.eNB_Repository
+          }
+          echo "eNB_Repository        :   ${eNB_Repository}"
+          if (params.eNB_Branch == null) {
+            eNB_Branch = env.GIT_BRANCH
+          } else {
+            eNB_Branch = params.eNB_Branch
+          }
+          echo "eNB_Branch            :   ${eNB_Branch}"
+          if (params.eNB_CommitID == null) {
+            eNB_CommitID = env.GIT_COMMIT
+          } else {
+            eNB_CommitID = params.eNB_CommitID
+          }
+          echo "eNB_CommitID          :   ${eNB_CommitID}"
+          if (params.eNB_mergeRequest != null) {
+            eNB_AllowMergeRequestProcess = params.eNB_mergeRequest
+            if (eNB_AllowMergeRequestProcess) {
+              if (params.eNB_TargetBranch != null) {
+                eNB_TargetBranch = params.eNB_TargetBranch
+              } else {
+                eNB_TargetBranch = 'develop'
+              }
+              echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+            }
+          }
+
+          if (params.EPC_IPAddress == null) {
+            allParametersPresent = false
+          }
+          if (params.EPC_Type == null) {
+            allParametersPresent = false
+          }
+          if (params.EPC_SourceCodePath == null) {
+            allParametersPresent = false
+          }
+          if (params.EPC_Credentials == null) {
+            allParametersPresent = false
+          }
+          if (params.OC_Credentials == null) {
+            allParametersPresent = false
+          }
+          if (params.OC_ProjectName == null) {
+            allParametersPresent = false
+          }
+          if (allParametersPresent) {
+            echo "All parameters are present"
+            if (eNB_AllowMergeRequestProcess) {
+              sh "git fetch"
+              sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
+            } else {
+              sh "git fetch"
+              sh "git checkout -f ${eNB_CommitID}"
+            }
+          } else {
+            echo "Some parameters are missing"
+            sh "./ci-scripts/fail.sh"
+          }
+        }
+      }
+    }
+
+    stage ("Deploy and Test") {
+      steps {
+        script {
+          dir ('ci-scripts') {
+            echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+            // If not present picking a default XML file
+            if (params.pythonTestXmlFile == null) {
+              // picking default
+              testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+              echo "Test XML file(default):   ${testXMLFile}"
+              mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
+            } else {
+              String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+              for (xmlFile in myXmlTestSuite) {
+                if (fileExists(xmlFile)) {
+                  mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                  echo "Test XML file         :   ${xmlFile}"
+                }
+              }
+            }
+            withCredentials([
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+              [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.OC_Credentials}", usernameVariable: 'OC_Username', passwordVariable: 'OC_Password']
+            ]) {
+              sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} ${mainPythonAllXmlFiles}"
+              String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+              for (xmlFile in myXmlTestSuite) {
+                if (fileExists(xmlFile)) {
+                  try {
+                   timeout (time: 60, unit: 'MINUTES') {
+                    sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --XMLTestFile=${xmlFile} --OCUserName=${OC_Username} --OCPassword=${OC_Password} --OCProjectName=${OC_ProjectName} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath}"
+                   }
+                  } catch (Exception e) {
+                    currentBuild.result = 'FAILURE'
+                    buildStageStatus = false
+                  }
+                }
+              }
+              sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
+            }
+          }
+        } 
+      }
+    }
+    stage ("Log Collection") {
+      steps {
+        script {
+          dir ('ci-scripts') {
+            // Zipping all archived log files
+              sh "mkdir test_logs"
+              sh "mv *.log* test_logs || true"
+              sh "zip -r -qq test_logs_${env.BUILD_ID}.zip *test_log*/"
+              sh "rm -rf *test_log*/"
+              if (fileExists("test_logs_${env.BUILD_ID}.zip")) {
+                archiveArtifacts artifacts: "test_logs_${env.BUILD_ID}.zip"
+              }
+              if (fileExists("test_logs_CN.zip")){
+                sh "mv test_logs_CN.zip test_logs_CN_${env.BUILD_ID}.zip"
+                archiveArtifacts artifacts: "test_logs_CN_${env.BUILD_ID}.zip"
+            }
+            if (fileExists("test_results.html")) {
+              sh "mv test_results.html test_results-${env.JOB_NAME}.html"
+              sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
+              archiveArtifacts artifacts: "test_results-${env.JOB_NAME}.html"
+            }
+          }
+        }
+      }
+    }
+  }  
+}

ci-scripts/Jenkinsfile-physim-deploy

@@ -55,7 +55,6 @@ pipeline {
     label pythonExecutor
   }
   options {
-    disableConcurrentBuilds()
     timestamps()
     ansiColor('xterm')
     lock(extra: lockResources)
@@ -193,7 +192,9 @@ pipeline {
               for (xmlFile in myXmlTestSuite) {
                 if (fileExists(xmlFile)) {
                   try {
+                   timeout (time: 60, unit: 'MINUTES') {
                     sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --XMLTestFile=${xmlFile} --OCUserName=${OC_Username} --OCPassword=${OC_Password} --OCProjectName=${OC_ProjectName}"
+                   }
                   } catch (Exception e) {
                     currentBuild.result = 'FAILURE'
                     buildStageStatus = false
@@ -211,10 +212,16 @@ pipeline {
         script {
           dir ('ci-scripts') {
             // Zipping all archived log files
-            sh "zip -r -qq physim_deploytest_logs_${env.BUILD_ID}.zip physim_test_logs_*/*"
-            sh "rm -rf physim_test_logs_*/"
-            if (fileExists("physim_deploytest_logs_${env.BUILD_ID}.zip")) {
-              archiveArtifacts artifacts: "physim_deploytest_logs_${env.BUILD_ID}.zip"
+              sh "mkdir test_logs"
+              sh "mv *.log* test_logs || true"
+              sh "zip -r -qq test_logs_${env.BUILD_ID}.zip *test_log*/"
+              sh "rm -rf *test_log*/"
+              if (fileExists("test_logs_${env.BUILD_ID}.zip")) {
+                archiveArtifacts artifacts: "test_logs_${env.BUILD_ID}.zip"
+              }
+              if (fileExists("test_logs_CN.zip")){
+                sh "mv test_logs_CN.zip test_logs_CN_${env.BUILD_ID}.zip"
+                archiveArtifacts artifacts: "test_logs_CN_${env.BUILD_ID}.zip"
             }
             if (fileExists("test_results.html")) {
               sh "mv test_results.html test_results-${env.JOB_NAME}.html"

ci-scripts/Jenkinsfile-push-registry

@@ -36,7 +36,6 @@ pipeline {
     label nodeExecutor
   }
   options {
-    disableConcurrentBuilds()
     ansiColor('xterm')
     lock(extra: lockResources)
   }

ci-scripts/Jenkinsfile-tmp-full-ran

@@ -61,7 +61,6 @@ pipeline {
         label pythonExecutor
     }
     options {
-        disableConcurrentBuilds()
         ansiColor('xterm')
         lock(extra: lockResources)
     }
@@ -201,7 +200,9 @@ pipeline {
                             for (xmlFile in myXmlTestSuite) {
                             if (fileExists(xmlFile)) {
                                 try {
+                                  timeout (time: 60, unit: 'MINUTES') {
                                     sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --UEIPAddress=${params.UE_IPAddress} --UEUserName=${UE_Username} --UEPassword=${UE_Password} --UESourceCodePath=${params.UE_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --XMLTestFile=${xmlFile}"
+                                  }
                                 } catch (Exception e) {
                                     currentBuild.result = 'FAILURE'
                                     buildStageStatus = false

ci-scripts/Jenkinsfile-tmp-multi-enb

@@ -50,7 +50,6 @@ pipeline {
         label pythonExecutor
     }
     options {
-        disableConcurrentBuilds()
         ansiColor('xterm')
         lock(extra: lockResources)
     }
@@ -197,7 +196,9 @@ pipeline {
                             for (xmlFile in myXmlTestSuite) {
                                 if (fileExists(xmlFile)) {
                                     try {
+                                      timeout (time: 60, unit: 'MINUTES') {
                                         sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --XMLTestFile=${xmlFile}"
+                                      }
                                     } catch (Exception e) {
                                         currentBuild.result = 'FAILURE'
                                         buildStageStatus = false

ci-scripts/Jenkinsfile-tmp-multi-enb-nsa

@@ -52,7 +52,6 @@ def StatusForDb = ""
 pipeline {
   agent {label pythonExecutor}
   options {
-    disableConcurrentBuilds()
     ansiColor('xterm')
     lock(extra: lockResources)
   }
@@ -216,7 +215,9 @@ pipeline {
               for (xmlFile in myXmlTestSuite) {
                 if (fileExists(xmlFile)) {
                   try {
+                   timeout (time: 60, unit: 'MINUTES') {
                     sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --UEIPAddress=${params.UE_IPAddress} --UEUserName=${UE_Username} --UEPassword=${UE_Password} --UESourceCodePath=${params.UE_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --XMLTestFile=${xmlFile}"
+                   }
                   } catch (Exception e) {
                     currentBuild.result = 'FAILURE'
                     buildStageStatus = false

ci-scripts/Jenkinsfile-tmp-ran

@@ -63,7 +63,6 @@ pipeline {
         label pythonExecutor
     }
     options {
-        disableConcurrentBuilds()
         ansiColor('xterm')
         lock(extra: lockResources)
     }
@@ -212,7 +211,9 @@ pipeline {
                             for (xmlFile in myXmlTestSuite) {
                             if (fileExists(xmlFile)) {
                                 try {
+                                  timeout (time: 60, unit: 'MINUTES') {
                                     sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --XMLTestFile=${xmlFile}"
+                                  }
                                 } catch (Exception e) {
                                     currentBuild.result = 'FAILURE'
                                     buildStageStatus = false

ci-scripts/Jenkinsfile-tmp-ue

@@ -63,7 +63,6 @@ pipeline {
         label pythonExecutor
     }
     options {
-        disableConcurrentBuilds()
         ansiColor('xterm')
         lock(extra: lockResources)
     }
@@ -186,7 +185,9 @@ pipeline {
                             for (xmlFile in myXmlTestSuite) {
                             if (fileExists(xmlFile)) {
                                 try {
+                                  timeout (time: 60, unit: 'MINUTES') {
                                     sh "python3 main.py --mode=TestUE --UEIPAddress=${params.UE_IPAddress} --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --UEUserName=${UE_Username} --UEPassword=${UE_Password} --UESourceCodePath=${params.UE_SourceCodePath} --XMLTestFile=${xmlFile}"
+                                  }
                                 } catch (Exception e) {
                                     currentBuild.result = 'FAILURE'
                                     buildStageStatus = false

ci-scripts/args_parse.py

@@ -197,6 +197,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA,PHYSIM,CLUST
                 SCA.eNBSourceCodePath=matchReg.group(1)
                 PHYSIM.eNBSourceCodePath=matchReg.group(1)
                 CLUSTER.eNBSourceCodePath=matchReg.group(1)
+                EPC.eNBSourceCodePath=matchReg.group(1)
             elif re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 matchReg = re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNB1SourceCodePath=matchReg.group(1)
@@ -219,21 +220,13 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA,PHYSIM,CLUST
             EPC.SourceCodePath=matchReg.group(1)
         elif re.match('^\-\-EPCType=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-EPCType=(.+)$', myArgv, re.IGNORECASE)
-            if re.match('OAI', matchReg.group(1), re.IGNORECASE) or re.match('ltebox', matchReg.group(1), re.IGNORECASE) or re.match('OAI-Rel14-CUPS', matchReg.group(1), re.IGNORECASE) or re.match('OAI-Rel14-Docker', matchReg.group(1), re.IGNORECASE):
+            if re.match('OAI', matchReg.group(1), re.IGNORECASE) or re.match('ltebox', matchReg.group(1), re.IGNORECASE) or re.match('OAI-Rel14-Docker', matchReg.group(1), re.IGNORECASE) or re.match('OC-OAI-CN5G', matchReg.group(1), re.IGNORECASE):
                 EPC.Type=matchReg.group(1)
             else:
-                sys.exit('Invalid EPC Type: ' + matchReg.group(1) + ' -- (should be OAI or ltebox or OAI-Rel14-CUPS or OAI-Rel14-Docker)')
+                sys.exit('Invalid EPC Type: ' + matchReg.group(1) + ' -- (should be OAI or ltebox or OAI-Rel14-Docker or OC-OAI-CN5G)')
         elif re.match('^\-\-EPCContainerPrefix=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-EPCContainerPrefix=(.+)$', myArgv, re.IGNORECASE)
             EPC.ContainerPrefix=matchReg.group(1)
-        elif re.match('^\-\-ADBIPAddress=(.+)$', myArgv, re.IGNORECASE):
-            print("ignoring --ADBIPAddress parameter")
-        elif re.match('^\-\-ADBUserName=(.+)$', myArgv, re.IGNORECASE):
-            print("ignoring --ADBUserName parameter")
-        elif re.match('^\-\-ADBType=(.+)$', myArgv, re.IGNORECASE):
-            print("ignoring --ADBType parameter")
-        elif re.match('^\-\-ADBPassword=(.+)$', myArgv, re.IGNORECASE):
-            print("ignoring --ADBPassword parameter")
         elif re.match('^\-\-XMLTestFile=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-XMLTestFile=(.+)$', myArgv, re.IGNORECASE)
             CiTestObj.testXMLfiles.append(matchReg.group(1))
@@ -260,14 +253,17 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA,PHYSIM,CLUST
             matchReg = re.match('^\-\-OCUserName=(.+)$', myArgv, re.IGNORECASE)
             PHYSIM.OCUserName = matchReg.group(1)
             CLUSTER.OCUserName = matchReg.group(1)
+            EPC.OCUserName = matchReg.group(1)
         elif re.match('^\-\-OCPassword=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-OCPassword=(.+)$', myArgv, re.IGNORECASE)
             PHYSIM.OCPassword = matchReg.group(1)
             CLUSTER.OCPassword = matchReg.group(1)
+            EPC.OCPassword = matchReg.group(1)
         elif re.match('^\-\-OCProjectName=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-OCProjectName=(.+)$', myArgv, re.IGNORECASE)
             PHYSIM.OCProjectName = matchReg.group(1)
             CLUSTER.OCProjectName = matchReg.group(1)
+            EPC.OCProjectName = matchReg.group(1)
         elif re.match('^\-\-OCUrl=(.+)$', myArgv, re.IGNORECASE):
             matchReg = re.match('^\-\-OCUrl=(.+)$', myArgv, re.IGNORECASE)
             CLUSTER.OCUrl = matchReg.group(1)

ci-scripts/as_ue/aw2s-asue.cfg

@@ -0,0 +1,183 @@
+/* UE simulator configuration file version 2021-06-17
+ * LTE / 5G Non StandAlone
+ * Copyright (C) 2019-2021 Amarisoft
+ */
+{
+#define N_ANTENNA_DL 1
+#define TDD 1
+
+log_options: "all.level=warn,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
+log_filename: "/tmp/ue1.log",
+
+/* Enable remote API and Web interface */
+com_addr: "0.0.0.0:9002",
+
+include "rf_driver/1chan.cfg",
+
+/* If true, allow the simulation of several UEs at the same time and
+allow dynamic UE creation from remote API */
+                    
+cell_groups: [{
+    group_type: "nr",
+    multi_ue: true,
+    cells: [{
+      rf_port: 0,
+      bandwidth: 20,
+#if TDD == 1
+      band: 78,
+      dl_nr_arfcn:627360,
+      ssb_nr_arfcn:627360,
+#else
+      band: 7,
+      dl_nr_arfcn: 536020,
+      ssb_nr_arfcn: 535930,
+      ssb_subcarrier_spacing: 15,
+#endif
+      subcarrier_spacing: 30,
+      n_antenna_dl: N_ANTENNA_DL,
+      n_antenna_ul: 1,
+      rx_to_tx_latency:2,
+    }],
+  }],
+       
+  ue_list: [
+    {
+      /* UE capabilities */
+      /* USIM data */
+      "ue_id" : 1,
+      "imsi": "001010000000100",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+
+      /* Enable it to create a TUN interface for each UE PDN */
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      /* UE capabilities */
+      /* USIM data */
+      "ue_id" : 2,
+      "imsi": "001010000000101",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+
+      /* Enable it to create a TUN interface for each UE PDN */
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      /* UE capabilities */
+      /* USIM data */
+      "ue_id" : 3,
+      "imsi": "001010000000102",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, sd: 66051, }, ],
+      default_pdu_session_snssai: { sst: 1, sd: 66051, },
+
+      /* Enable it to create a TUN interface for each UE PDN */
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      /* UE capabilities */
+      /* USIM data */
+      "ue_id" : 4,
+      "imsi": "001010000000103",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, sd: 66051, }, ],
+      default_pdu_session_snssai: { sst: 1, sd: 66051, },
+
+      /* Enable it to create a TUN interface for each UE PDN */
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      /* UE capabilities */
+      /* USIM data */
+      "ue_id" : 5,
+      "imsi": "001010000000104",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, sd: 66051, }, ],
+      default_pdu_session_snssai: { sst: 1, sd: 66051, },
+
+      /* Enable it to create a TUN interface for each UE PDN */
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      /* UE capabilities */
+      /* USIM data */
+      "ue_id" : 6,
+      "imsi": "001010000000105",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, sd: 66051, }, ],
+      default_pdu_session_snssai: { sst: 1, sd: 66051, },
+
+      /* Enable it to create a TUN interface for each UE PDN */
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      /* UE capabilities */
+   
+      /* USIM data */
+      "ue_id" : 7,
+      "imsi": "001010000000106",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, sd: 66051, }, ],
+      default_pdu_session_snssai: { sst: 1, sd: 66051, },
+
+
+      /* Enable it to allow sim_events to be handled remotely */
+      //rue_addr: "127.1.0.0",
+      /* Enable it to create a TUN interface for each UE PDN */
+      tun_setup_script: "ue-ifup",
+    },
+  ],
+}
+

ci-scripts/as_ue/aw2s-multi-20897.cfg

@@ -0,0 +1,280 @@
+/* UE simulator configuration file version 2021-06-17
+ * LTE / 5G Non StandAlone
+ * Copyright (C) 2019-2021 Amarisoft
+ */
+{
+#define N_ANTENNA_DL 2
+#define TDD 1
+
+log_options: "all.level=warn,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
+log_filename: "/tmp/ue.log",
+
+/* Enable remote API and Web interface */
+com_addr: "0.0.0.0:9002",
+
+include "rf_driver/1chan.cfg",
+
+/* If true, allow the simulation of several UEs at the same time and
+allow dynamic UE creation from remote API */
+                    
+  cell_groups: [{
+      group_type: "nr",
+      multi_ue: true,
+      cells: [{
+      rf_port: 0,
+      bandwidth: 20,
+      band: 78,
+      dl_nr_arfcn:627360,
+      ssb_nr_arfcn:627360,
+      subcarrier_spacing: 30,
+      n_antenna_dl: N_ANTENNA_DL,
+      n_antenna_ul: 1,
+      rx_to_tx_latency:2,
+    }],
+  }],
+
+  /* UE capabilities */
+  /* USIM data */     
+  ue_list: [
+    {
+      "ue_id" : 1,
+      "imsi": "208970000000111",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 2,
+      "imsi": "208970000000112",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 3,
+      "imsi": "208970000000113",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 4,
+      "imsi": "208970000000114",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 5,
+      "imsi": "208970000000115",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 6,
+      "imsi": "208970000000116",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 7,
+      "imsi": "208970000000117",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 8,
+      "imsi": "208970000000118",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 9,
+      "imsi": "208970000000119",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 10,
+      "imsi": "208970000000120",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 11,
+      "imsi": "208970000000121",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 12,
+      "imsi": "208970000000122",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 13,
+      "imsi": "208970000000123",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+        {
+      "ue_id" : 14,
+      "imsi": "208970000000124",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 15,
+      "imsi": "208970000000125",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+    {
+      "ue_id" : 16,
+      "imsi": "208970000000126",
+      "K": "fec86ba6eb707ed08905757b1bb44b8f",
+      "sim_algo":"milenage",
+      "op": "1006020f0a478bf6b699f15c062e42b3",
+
+      as_release: 15,
+      ue_category: "nr",
+      apn:"oai",
+      attach_pdn_type:"ipv4",
+      default_nssai: [ { sst: 1, }, ],
+      default_pdu_session_snssai: { sst: 1, },
+      tun_setup_script: "ue-ifup",
+    },
+ ],
+}

ci-scripts/as_ue/oaicicd-3xue-noPing-SATest.cfg

@@ -1,172 +0,0 @@
-/* UE simulator configuration */
-
-
-/* UE simulator configuration file version 2021-06-17
- * LTE / 5G Non StandAlone
- * Copyright (C) 2019-2021 Amarisoft
- */
-{
-#define N_ANTENNA_DL 1
-#define TDD 1
-#define CELL_BANDWIDTH 40
-#define UE_COUNT 3 // number of simulated UEs 208970100001127, 208970100001128, 208970100001129
-
-
-log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
-log_filename: "/tmp/ue0.log",
-
-/* Enable remote API and Web interface */
-com_addr: "0.0.0.0:9002",
-
-include "rf_driver/1chan.cfg",
-
-/* If true, allow the simulation of several UEs at the same time and allow dynamic UE creation from remote API */
-                    
-cell_groups: [{
-    group_type: "nr",
-    multi_ue: true,
-    cells: [{
-      rf_port: 0,
-      bandwidth: CELL_BANDWIDTH,
-#if TDD == 1
-      band: 78,
-      dl_nr_arfcn:621312,
-      ssb_nr_arfcn:621312,
-
-      //band: 41,
-      //dl_nr_arfcn:517020,
-      //ssb_nr_arfcn:516990,
-#else
-      band: 7,
-      dl_nr_arfcn: 536020,
-      ssb_nr_arfcn: 535930,
-      ssb_subcarrier_spacing: 15,
-#endif
-      subcarrier_spacing: 30,
-      n_antenna_dl: N_ANTENNA_DL,
-      n_antenna_ul: 1,
-      rx_to_tx_latency:2,
-    }],
-}],
-
-    
-/* Enable it to allow sim_events to be handled remotely */
-//rue_bind_addr: "127.0.10.11",
-
-
-
-ue_list: [
-  {
-    /* UE capabilities */ 
-    /* USIM data */    
-    "ue_id" : 0,
-    "imsi": "208970100001127",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      }, 
-      {
-        event: "power_off",
-        start_time: 30,
-      }
-    ] /*end sim events */
-  }, /*end UE object 0*/
-  {
-    /* UE capabilities */ 
-    /* USIM data */  
-    "ue_id" : 1, 
-    "imsi": "208970100001128",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      }, 
-      {
-        event: "power_off",
-        start_time: 30,
-      }
-    ] /*end sim events */
-  }, /*end UE object 1*/
-  {
-    /* UE capabilities */
-    /* USIM data */
-    "ue_id" : 2,
-    "imsi": "208970100001129",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      },
-      {
-        event: "power_off",
-        start_time: 30,
-      }
-    ] /*end sim events */
-  } /*end UE object 2*/
-  ],/*end UE list*/
-}/*end json*/
-

ci-scripts/as_ue/oaicicd-multi-ue-1xPing-SATest.cfg

@@ -1,142 +0,0 @@
-/* UE simulator configuration */
-
-
-/* UE simulator configuration file version 2021-06-17
- * LTE / 5G Non StandAlone
- * Copyright (C) 2019-2021 Amarisoft
- */
-{
-#define N_ANTENNA_DL 1
-#define TDD 1
-#define CELL_BANDWIDTH 40
-#define UE_COUNT 2 // number of simulated UEs 208970100001127, 208970100001128, 208970100001129
-
-
-log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
-log_filename: "/tmp/ue0.log",
-
-/* Enable remote API and Web interface */
-com_addr: "0.0.0.0:9002",
-
-include "rf_driver/1chan.cfg",
-
-/* If true, allow the simulation of several UEs at the same time and allow dynamic UE creation from remote API */
-                    
-cell_groups: [{
-    group_type: "nr",
-    multi_ue: true,
-    cells: [{
-      rf_port: 0,
-      bandwidth: CELL_BANDWIDTH,
-#if TDD == 1
-      band: 78,
-      dl_nr_arfcn:621312,
-      ssb_nr_arfcn:621312,
-
-      //band: 41,
-      //dl_nr_arfcn:517020,
-      //ssb_nr_arfcn:516990,
-#else
-      band: 7,
-      dl_nr_arfcn: 536020,
-      ssb_nr_arfcn: 535930,
-      ssb_subcarrier_spacing: 15,
-#endif
-      subcarrier_spacing: 30,
-      n_antenna_dl: N_ANTENNA_DL,
-      n_antenna_ul: 1,
-      rx_to_tx_latency:2,
-    }],
-}],
-
-    
-/* Enable it to allow sim_events to be handled remotely */
-//rue_bind_addr: "127.0.10.11",
-
-
-
-ue_list: [
-  {
-    /* UE capabilities */ 
-    /* USIM data */    
-    "ue_id" : 1,
-    "imsi": "208970100001127",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      }, 
-      {
-        event: "power_off",
-        start_time: 30,
-      }
-    ] /*end sim events */
-  }, /*end UE object 0*/
-  {
-    /* UE capabilities */ 
-    /* USIM data */  
-    "ue_id" : 2, 
-    "imsi": "208970100001128",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      }, 
-      {
-       "tag": "ping",
-       "prog":"oai_ext_app.sh",
-        start_time: 15,
-        end_time: 25,
-        "args":["ping 192.168.70.136"],
-        "event":"ext_app"              
-      },
-      {
-        event: "power_off",
-        start_time: 30,
-      }
-    ] /*end sim events */
-  } /*end UE object 1*/
-  ],/*end UE list*/
-}/*end json*/

ci-scripts/as_ue/oaicicd-multi-ue-2xPing-SATest.cfg

@@ -1,150 +0,0 @@
-/* UE simulator configuration */
-
-
-/* UE simulator configuration file version 2021-06-17
- * LTE / 5G Non StandAlone
- * Copyright (C) 2019-2021 Amarisoft
- */
-{
-#define N_ANTENNA_DL 1
-#define TDD 1
-#define CELL_BANDWIDTH 40
-#define UE_COUNT 2 // number of simulated UEs 208970100001127, 208970100001128, 208970100001129
-
-
-log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
-log_filename: "/tmp/ue0.log",
-
-/* Enable remote API and Web interface */
-com_addr: "0.0.0.0:9002",
-
-include "rf_driver/1chan.cfg",
-
-/* If true, allow the simulation of several UEs at the same time and allow dynamic UE creation from remote API */
-                    
-cell_groups: [{
-    group_type: "nr",
-    multi_ue: true,
-    cells: [{
-      rf_port: 0,
-      bandwidth: CELL_BANDWIDTH,
-#if TDD == 1
-      band: 78,
-      dl_nr_arfcn:621312,
-      ssb_nr_arfcn:621312,
-
-      //band: 41,
-      //dl_nr_arfcn:517020,
-      //ssb_nr_arfcn:516990,
-#else
-      band: 7,
-      dl_nr_arfcn: 536020,
-      ssb_nr_arfcn: 535930,
-      ssb_subcarrier_spacing: 15,
-#endif
-      subcarrier_spacing: 30,
-      n_antenna_dl: N_ANTENNA_DL,
-      n_antenna_ul: 1,
-      rx_to_tx_latency:2,
-    }],
-}],
-
-    
-/* Enable it to allow sim_events to be handled remotely */
-//rue_bind_addr: "127.0.10.11",
-
-
-
-ue_list: [
-  {
-    /* UE capabilities */ 
-    /* USIM data */    
-    "ue_id" : 1,
-    "imsi": "208970100001127",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      }, 
-      {
-       "tag": "ping",
-       "prog":"oai_ext_app.sh",
-        start_time: 15,
-        end_time: 25,
-        "args":["ping 192.168.70.136"],
-        "event":"ext_app"              
-      },
-      {
-        event: "power_off",
-        start_time: 30,
-      }
-    ] /*end sim events */
-  }, /*end UE object 0*/
-  {
-    /* UE capabilities */ 
-    /* USIM data */  
-    "ue_id" : 2, 
-    "imsi": "208970100001128",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      }, 
-      {
-       "tag": "ping",
-       "prog":"oai_ext_app.sh",
-        start_time: 15,
-        end_time: 25,
-        "args":["ping 192.168.70.136"],
-        "event":"ext_app"              
-      },
-      {
-        event: "power_off",
-        start_time: 30,
-      }
-    ] /*end sim events */
-  } /*end UE object 1*/
-  ],/*end UE list*/
-}/*end json*/

ci-scripts/as_ue/oaicicd-multi-ue-2xPingSeq-SATest.cfg

@@ -1,150 +0,0 @@
-/* UE simulator configuration */
-
-
-/* UE simulator configuration file version 2021-06-17
- * LTE / 5G Non StandAlone
- * Copyright (C) 2019-2021 Amarisoft
- */
-{
-#define N_ANTENNA_DL 1
-#define TDD 1
-#define CELL_BANDWIDTH 40
-#define UE_COUNT 2 // number of simulated UEs 208970100001127, 208970100001128, 208970100001129
-
-
-log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
-log_filename: "/tmp/ue0.log",
-
-/* Enable remote API and Web interface */
-com_addr: "0.0.0.0:9002",
-
-include "rf_driver/1chan.cfg",
-
-/* If true, allow the simulation of several UEs at the same time and allow dynamic UE creation from remote API */
-                    
-cell_groups: [{
-    group_type: "nr",
-    multi_ue: true,
-    cells: [{
-      rf_port: 0,
-      bandwidth: CELL_BANDWIDTH,
-#if TDD == 1
-      band: 78,
-      dl_nr_arfcn:621312,
-      ssb_nr_arfcn:621312,
-
-      //band: 41,
-      //dl_nr_arfcn:517020,
-      //ssb_nr_arfcn:516990,
-#else
-      band: 7,
-      dl_nr_arfcn: 536020,
-      ssb_nr_arfcn: 535930,
-      ssb_subcarrier_spacing: 15,
-#endif
-      subcarrier_spacing: 30,
-      n_antenna_dl: N_ANTENNA_DL,
-      n_antenna_ul: 1,
-      rx_to_tx_latency:2,
-    }],
-}],
-
-    
-/* Enable it to allow sim_events to be handled remotely */
-//rue_bind_addr: "127.0.10.11",
-
-
-
-ue_list: [
-  {
-    /* UE capabilities */ 
-    /* USIM data */    
-    "ue_id" : 1,
-    "imsi": "208970100001127",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      },
-      {
-       "tag": "ping",
-       "prog":"oai_ext_app.sh",
-        start_time: 20,
-        end_time: 30,
-        "args":["ping 192.168.70.136"],
-        "event":"ext_app"
-      },
-      {
-        event: "power_off",
-        start_time: 60,
-      }
-    ] /*end sim events */
-  }, /*end UE object 0*/
-  {
-    /* UE capabilities */ 
-    /* USIM data */  
-    "ue_id" : 2, 
-    "imsi": "208970100001128",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-      {
-      sst: 1,
-      sd: 66051,
-      },
-    ],
-    default_pdu_session_snssai: {
-      sst: 1,
-      sd: 66051,
-    },
-    /* Enable it to allow sim_events to be handled remotely */
-    //rue_addr: "127.1.0.0",
-    /* Enable it to create a TUN interface for each UE PDN */
-    tun_setup_script: "ue-ifup",
-    sim_events: [
-      {
-        event: "power_on",
-        start_time: 5,
-      }, 
-      {
-       "tag": "ping",
-       "prog":"oai_ext_app.sh",
-        start_time: 40,
-        end_time: 50,
-        "args":["ping 192.168.70.136"],
-        "event":"ext_app"              
-      },
-      {
-        event: "power_off",
-        start_time: 60,
-      }
-    ] /*end sim events */
-  } /*end UE object 1*/
-  ],/*end UE list*/
-}/*end json*/

ci-scripts/as_ue/oaicicd-ue-Ping-SATest.cfg

@@ -1,113 +0,0 @@
-/* UE simulator configuration */
-
-
-
-/* UE simulator configuration file version 2021-06-17
- * LTE / 5G Non StandAlone
- * Copyright (C) 2019-2021 Amarisoft
- */
-{
-#define N_ANTENNA_DL 1
-#define TDD 1
-#define CELL_BANDWIDTH 40
-
-
-  log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
-  log_filename: "/tmp/ue1.log",
-
-  /* Enable remote API and Web interface */
-  com_addr: "0.0.0.0:9002",
-
-  include "rf_driver/1chan.cfg",
-
-      /* If true, allow the simulation of several UEs at the same time and
-         allow dynamic UE creation from remote API */
-                    
-cell_groups: [{
-    group_type: "nr",
-    multi_ue: false,
-    cells: [{
-      rf_port: 0,
-      bandwidth: CELL_BANDWIDTH,
-#if TDD == 1
-      band: 78,
-      dl_nr_arfcn:621312,
-      ssb_nr_arfcn:621312,
-
-      //band: 41,
-      //dl_nr_arfcn:517020,
-      //ssb_nr_arfcn:516990,
-#else
-      band: 7,
-      dl_nr_arfcn: 536020,
-      ssb_nr_arfcn: 535930,
-      ssb_subcarrier_spacing: 15,
-#endif
-      subcarrier_spacing: 30,
-      n_antenna_dl: N_ANTENNA_DL,
-      n_antenna_ul: 1,
-      rx_to_tx_latency:2,
-    }],
-  }],
-
-
-
-       
-  /* Enable it to allow sim_events to be handled remotely */
-  //rue_bind_addr: "127.0.10.11",
-
-  ue_list: [
-    {
-      /* UE capabilities */
-   
-    /* USIM data */
-
-
-    "imsi": "208970100001127",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-
-
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-    {
-    sst: 1,
-    sd: 66051,
-    },
-    ],
-
-    default_pdu_session_snssai: {
-    sst: 1,
-    sd: 66051,
-    },
-
-
-      /* Enable it to allow sim_events to be handled remotely */
-      //rue_addr: "127.1.0.0",
-
-      /* Enable it to create a TUN interface for each UE PDN */
-      tun_setup_script: "ue-ifup",
-
-      sim_events: [{
-        event: "power_on",
-        start_time: 5,
-      }, {
-       "tag": "ping",
-       "prog":"oai_ext_app.sh",
-        start_time: 15,
-        end_time: 25,
-        "args":["ping 192.168.70.136"],
-        "event":"ext_app"
-              
-      },
-      {
-        event: "power_off",
-        start_time: 30,
-      }]
-    }
-  ],
-}

ci-scripts/as_ue/oaicicd-ue-iperf-SATest.cfg

@@ -1,109 +0,0 @@
-/* UE simulator configuration */
-
-
-
-/* UE simulator configuration file version 2021-06-17
- * LTE / 5G Non StandAlone
- * Copyright (C) 2019-2021 Amarisoft
- */
-{
-#define N_ANTENNA_DL 1
-#define TDD 1
-#define CELL_BANDWIDTH 20
-
-
-  log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1",
-  log_filename: "/tmp/ue0.log",
-
-  /* Enable remote API and Web interface */
-  com_addr: "0.0.0.0:9002",
-
-  include "rf_driver/1chan.cfg",
-
-      /* If true, allow the simulation of several UEs at the same time and
-         allow dynamic UE creation from remote API */
-                    
-cell_groups: [{
-    group_type: "nr",
-    multi_ue: false,
-    cells: [{
-      rf_port: 0,
-      bandwidth: CELL_BANDWIDTH,
-#if TDD == 1
-     // band: 78,
-     // dl_nr_arfcn:621312,
-     // ssb_nr_arfcn:621312,*/
-
-      band: 41,
-      dl_nr_arfcn:517020,
-      ssb_nr_arfcn:516990,
-#else
-      band: 7,
-      dl_nr_arfcn: 536020,
-      ssb_nr_arfcn: 535930,
-      ssb_subcarrier_spacing: 15,
-#endif
-      subcarrier_spacing: 30,
-      n_antenna_dl: N_ANTENNA_DL,
-      n_antenna_ul: 1,
-      rx_to_tx_latency:2,
-    }],
-  }],
-
-
-
-       
-  /* Enable it to allow sim_events to be handled remotely */
-  //rue_bind_addr: "127.0.10.11",
-
-  ue_list: [
-    {
-      /* UE capabilities */
-   
-    /* USIM data */
-     
-    "imsi": "208970100001127",
-    "K": "fec86ba6eb707ed08905757b1bb44b8f",
-    "sim_algo":"milenage",
-    "op": "1006020f0a478bf6b699f15c062e42b3",
-
-
-    as_release: 15,
-    ue_category: "nr",
-    apn:"oai",
-    attach_pdn_type:"ipv4",
-    default_nssai: [
-    {
-    sst: 1,
-    sd: 1,
-    },
-    ],
-
-    default_pdu_session_snssai: {
-    sst: 1,
-    sd: 1,
-    },
-
-
-      /* Enable it to allow sim_events to be handled remotely */
-      //rue_addr: "127.1.0.0",
-
-      /* Enable it to create a TUN interface for each UE PDN */
-      tun_setup_script: "ue-ifup",
-
-      sim_events: [{
-        event: "power_on",
-        start_time: 5,
-      }, {
-        event: "ext_app",
-        start_time: 15,
-        end_time: 25,
-        prog: "ext_app.sh",
-        args: ["iperf", " -c  172.21.10.5", " -u"," -b 1M"," -i 1"," -t 10"]
-      }, {
-        event: "power_off",
-        start_time: 30,
-      }]
-    }
-  ],
-}

ci-scripts/ci_ueinfra.yaml

@@ -4,7 +4,7 @@ idefix:
   TermScript: sudo -S killall --signal SIGKILL quectel-CM
   AttachScript: sudo python3 ci_ctl_qtel.py /dev/ttyUSB2 wup
   DetachScript: sudo python3 ci_ctl_qtel.py /dev/ttyUSB2 detach
-  UENetworkScript: ip a show dev wwan0
+  NetworkScript: ip a show dev wwan0
   IF: wwan0
   MTU: 1500
   Trace: True
@@ -15,7 +15,7 @@ nrmodule2_quectel:
   TermScript: sudo -S killall --signal SIGKILL quectel-CM
   AttachScript: sudo python3 ci_ctl_qtel.py /dev/ttyUSB2 wup
   DetachScript: sudo python3 ci_ctl_qtel.py /dev/ttyUSB2 detach
-  UENetworkScript: ip a show dev wwan0
+  NetworkScript: ip a show dev wwan0
   IF: wwan0
   MTU: 1500
   LogStore: /media/ci_qlogs
@@ -29,7 +29,7 @@ adb_ue_1:
   CheckStatusScript: /home/oaicicd/ci_ctl_adb.sh check R3CM40LZPHT
   DataEnableScript: adb -s R3CM40LZPHT shell "svc data enable"
   DataDisableScript: adb -s R3CM40LZPHT shell "svc data disable"
-  UENetworkScript: adb -s R3CM40LZPHT shell "ip address show | grep rmnet_data0"
+  NetworkScript: adb -s R3CM40LZPHT shell "ip address show | grep rmnet_data0"
   CmdPrefix: adb -s R3CM40LZPHT shell
   MTU: 1500
   LogStore: /media/usb-drive/ci_adb_1-logs
@@ -42,87 +42,158 @@ adb_ue_2:
   CheckStatusScript: /home/oaicicd/ci_ctl_adb.sh check 5200c00db4413517
   DataEnableScript: adb -s 5200c00db4413517 shell "svc data enable"
   DataDisableScript: adb -s 5200c00db4413517 shell "svc data disable"
-  UENetworkScript: adb -s 5200c00db4413517 shell "ip address show | grep rmnet"
+  NetworkScript: adb -s 5200c00db4413517 shell "ip address show | grep rmnet"
   CmdPrefix: adb -s 5200c00db4413517 shell
   MTU: 1500
   LogStore: /media/usb-drive/ci_adb_2-logs
 
 amarisoft_ue:
   Host: amariue
-  InitScript: nohup /root/NV18-06-2022/ue/lteue /root/NV18-06-2022/ue/config/oaicicd-ue-ci-test.cfg &
-  TermScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"quit"}'
+  InitScript: /root/NV18-06-2022/lteue-linux-2023-03-17/lteue /root/oaicicd/ran_sa_aw2s_asue/aw2s-multi-20897-2x2.cfg &
+  TermScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js -t 10 127.0.0.1:9002 '{"message":"quit"}' || killall -KILL lteue-avx2
 amarisoft_ue_1:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":1}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":1}'
-  UENetworkScript: ip netns exec ue1 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":1}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":1}'
+  NetworkScript: ip netns exec ue1 ip a show dev pdn0
   CmdPrefix: ip netns exec ue1
   MTU: 1500
 amarisoft_ue_2:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":2}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":2}'
-  UENetworkScript: ip netns exec ue2 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":2}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":2}'
+  NetworkScript: ip netns exec ue2 ip a show dev pdn0
   CmdPrefix: ip netns exec ue2
   MTU: 1500
 amarisoft_ue_3:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":3}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":3}'
-  UENetworkScript: ip netns exec ue3 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":3}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":3}'
+  NetworkScript: ip netns exec ue3 ip a show dev pdn0
   CmdPrefix: ip netns exec ue3
   MTU: 1500
 amarisoft_ue_4:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":4}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":4}'
-  UENetworkScript: ip netns exec ue4 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":4}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":4}'
+  NetworkScript: ip netns exec ue4 ip a show dev pdn0
   CmdPrefix: ip netns exec ue4
   MTU: 1500
 amarisoft_ue_5:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":5}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":5}'
-  UENetworkScript: ip netns exec ue5 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":5}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":5}'
+  NetworkScript: ip netns exec ue5 ip a show dev pdn0
   CmdPrefix: ip netns exec ue5
   MTU: 1500
 amarisoft_ue_6:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":6}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":6}'
-  UENetworkScript: ip netns exec ue6 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":6}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":6}'
+  NetworkScript: ip netns exec ue6 ip a show dev pdn0
   CmdPrefix: ip netns exec ue6
   MTU: 1500
 amarisoft_ue_7:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":7}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":7}'
-  UENetworkScript: ip netns exec ue7 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":7}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":7}'
+  NetworkScript: ip netns exec ue7 ip a show dev pdn0
   CmdPrefix: ip netns exec ue7
   MTU: 1500
 amarisoft_ue_8:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":8}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":8}'
-  UENetworkScript: ip netns exec ue8 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":8}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":8}'
+  NetworkScript: ip netns exec ue8 ip a show dev pdn0
   CmdPrefix: ip netns exec ue8
   MTU: 1500
 amarisoft_ue_9:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":9}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":9}'
-  UENetworkScript: ip netns exec ue9 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":9}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":9}'
+  NetworkScript: ip netns exec ue9 ip a show dev pdn0
   CmdPrefix: ip netns exec ue9
   MTU: 1500
 amarisoft_ue_10:
   Host: amariue
-  AttachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":10}'
-  DetachScript: /root/NV18-06-2022/lteue-linux-2022-06-18/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":10}'
-  UENetworkScript: ip netns exec ue10 ip a show dev pdn0
+  AttachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_on","ue_id":10}'
+  DetachScript: /root/NV18-06-2022/lteue-linux-2023-03-17/doc/ws.js 127.0.0.1:9002 '{"message":"power_off","ue_id":10}'
+  NetworkScript: ip netns exec ue10 ip a show dev pdn0
   CmdPrefix: ip netns exec ue10
   MTU: 1500
 
-oai_ue_obelix:
-  Host: obelix
-  UENetworkScript: ip a show dev oaitun_ue1
+oai_ue_caracal:
+  Host: caracal
+  AttachScript: 'docker start oai-nr-ue'
+  DetachScript: 'docker stop oai-nr-ue'
+  NetworkScript: ip a show dev oaitun_ue1
   IF: oaitun_ue1
+  MTU: 1500
+
+rfsim5g_gnb_nos1:
+  Host: localhost
+  NetworkScript: docker exec rfsim5g-oai-gnb ip a show dev oaitun_enb1
+  CmdPrefix: docker exec rfsim5g-oai-gnb
+  IF: oaitun_enb1
+
+rfsim5g_ue:
+  Host: localhost
+  NetworkScript: docker exec rfsim5g-oai-nr-ue ip a show dev oaitun_ue1
+  CmdPrefix: docker exec rfsim5g-oai-nr-ue
+  IF: oaitun_ue1
+  AttachScript: docker start rfsim5g-oai-nr-ue
+  DetachScript: docker stop rfsim5g-oai-nr-ue
+  MTU: 1500
+
+rfsim5g_ue2:
+  Host: localhost
+  NetworkScript: docker exec rfsim5g-oai-nr-ue2 ip a show dev oaitun_ue1
+  CmdPrefix: docker exec rfsim5g-oai-nr-ue2
+  IF: oaitun_ue1
+  AttachScript: docker start rfsim5g-oai-nr-ue2
+  DetachScript: docker stop rfsim5g-oai-nr-ue2
+  MTU: 1500
+
+rfsim5g_ext_dn:
+  Host: localhost
+  NetworkScript: docker exec rfsim5g-oai-ext-dn ip a show dev eth0
+  CmdPrefix: docker exec rfsim5g-oai-ext-dn
+
+rfsim4g_ue:
+  Host: localhost
+  NetworkScript: docker exec rfsim4g-oai-lte-ue0 ip a show dev oaitun_ue1
+  CmdPrefix: docker exec rfsim4g-oai-lte-ue0
+  IF: oaitun_ue1
+
+rfsim4g_ext_dn:
+  Host: localhost
+  NetworkScript: docker exec rfsim4g-trf-gen ip a show dev eth0
+  CmdPrefix: docker exec rfsim4g-trf-gen
+
+rfsim4g_enb_nos1:
+  Host: localhost
+  NetworkScript: docker exec rfsim4g-oai-enb ip a show dev oaitun_enb1
+  CmdPrefix: docker exec rfsim4g-oai-enb
+  IF: oaitun_enb1
+
+l2sim5g_ue:
+  Host: localhost
+  NetworkScript: docker exec l2sim-oai-nr-ue0 ip a show dev oaitun_ue1
+  CmdPrefix: docker exec l2sim-oai-nr-ue0
+  IF: oaitun_ue1
+
+l2sim5g_ext_dn:
+  Host: localhost
+  NetworkScript: docker exec l2sim-oai-ext-dn ip a show dev eth0
+  CmdPrefix: docker exec l2sim-oai-ext-dn
+
+l2sim4g_ue:
+  Host: localhost
+  NetworkScript: docker exec l2sim4g-oai-lte-ue1 ip a show dev oaitun_ue1
+  CmdPrefix: docker exec l2sim4g-oai-lte-ue1
+  IF: oaitun_ue1
+
+l2sim4g_ext_dn:
+  Host: localhost
+  NetworkScript: docker exec l2sim4g-trf-gen ip a show dev eth0
+  CmdPrefix: docker exec l2sim4g-trf-gen

ci-scripts/cls_cluster.py

@@ -40,6 +40,30 @@ import cls_cmd
 
 IMAGE_REGISTRY_SERVICE_NAME = "image-registry.openshift-image-registry.svc"
 NAMESPACE = "oaicicd-ran"
+OCUrl = "https://api.oai.cs.eurecom.fr:6443"
+OCRegistry = "default-route-openshift-image-registry.apps.oai.cs.eurecom.fr/"
+CI_OC_RAN_NAMESPACE = "oaicicd-ran"
+CI_OC_CORE_NAMESPACE = "oaicicd-core-for-ci-ran"
+
+def OC_login(cmd, ocUserName, ocPassword, ocProjectName):
+	if ocUserName == '' or ocPassword == '' or ocProjectName == '':
+		HELP.GenericHelp(CONST.Version)
+		sys.exit('Insufficient Parameter: no OC Credentials')
+	if OCRegistry.startswith("http") and not self.OCRegistry.endswith("/"):
+		sys.exit(f'ocRegistry {OCRegistry} should not start with http:// or https:// and end on a slash /')
+	ret = cmd.run(f'oc login -u {ocUserName} -p {ocPassword} --server {OCUrl}')
+	if ret.returncode != 0:
+		logging.error('\u001B[1m OC Cluster Login Failed\u001B[0m')
+		return False
+	ret = cmd.run(f'oc project {ocProjectName}')
+	if ret.returncode != 0:
+		logging.error(f'\u001B[1mUnable to access OC project {ocProjectName}\u001B[0m')
+		OC_logout(cmd)
+		return False
+	return True
+
+def OC_logout(cmd):
+	cmd.run(f'oc logout')
 
 class Cluster:
 	def __init__(self):
@@ -57,7 +81,8 @@ class Cluster:
 		self.ranAllowMerge = False
 		self.ranTargetBranch = ""
 		self.cmd = None
-
+		self.imageToPull = ''
+		self.testSvrId = None
 
 	def _recreate_entitlements(self):
 		# recreating entitlements, don't care if deletion fails
@@ -170,11 +195,47 @@ class Cluster:
 	def _undeploy_pod(self, filename):
 		self.cmd.run(f'oc delete -f {filename}')
 
+	def PullClusterImage(self, HTML, RAN):
+		if self.testSvrId == None: self.testSvrId = self.eNBIPAddress
+		if self.imageToPull == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug(f'Pull OC image {self.imageToPull} to server {self.testSvrId}')
+		self.testCase_id = HTML.testCase_id
+		cmd = cls_cmd.getConnection(self.testSvrId)
+		succeeded = OC_login(cmd, self.OCUserName, self.OCPassword, CI_OC_RAN_NAMESPACE)
+		if not succeeded:
+			logging.error('\u001B[1m OC Cluster Login Failed\u001B[0m')
+			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_LOGIN_FAIL)
+			return False
+		ret = cmd.run(f'oc whoami -t | docker login -u oaicicd --password-stdin {self.OCRegistry}')
+		if ret.returncode != 0:
+			logging.error(f'\u001B[1m Unable to access OC project {CI_OC_RAN_NAMESPACE}\u001B[0m')
+			OC_logout(cmd)
+			cmd.close()
+			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.OC_LOGIN_FAIL)
+			return False
+		for image in self.imageToPull:
+			imagePrefix = f'{self.OCRegistry}{CI_OC_RAN_NAMESPACE}'
+			imageTag = cls_containerize.ImageTagToUse(image, self.ranCommitID, self.ranBranch, self.ranAllowMerge)
+			ret = cmd.run(f'docker pull {imagePrefix}/{imageTag}')
+			if ret.returncode != 0:
+				logging.error(f'Could not pull {image} from local registry : {self.OCRegistry}')
+				OC_logout(cmd)
+				cmd.close()
+				HTML.CreateHtmlTestRow('msg', 'KO', CONST.ALL_PROCESSES_OK)
+				return False
+			cmd.run(f'docker tag {imagePrefix}/{imageTag} oai-ci/{imageTag}')
+			cmd.run(f'docker rmi {imagePrefix}/{imageTag}')
+		OC_logout(cmd)
+		cmd.close()
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		return True
+
 	def BuildClusterImage(self, HTML):
 		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit(f'Insufficient Parameter: ranRepository {self.ranRepository} ranBranch {ranBranch} ranCommitID {self.ranCommitID}')
-
 		lIpAddr = self.eNBIPAddress
 		lSourcePath = self.eNBSourceCodePath
 		if lIpAddr == '' or lSourcePath == '':
@@ -204,16 +265,16 @@ class Cluster:
 
 		baseTag = 'develop'
 		forceBaseImageBuild = False
-		imageTag = 'develop'
 		if self.ranAllowMerge: # merging MR branch into develop -> temporary image
 			imageTag = f'{self.ranBranch}-{self.ranCommitID[0:8]}'
 			if self.ranTargetBranch == 'develop':
-				ret = self.cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base.rhel8.2 | grep --colour=never -i INDEX')
+				ret = self.cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base.rhel9 | grep --colour=never -i INDEX')
 				result = re.search('index', ret.stdout)
 				if result is not None:
 					forceBaseImageBuild = True
 					baseTag = 'ci-temp'
 		else:
+			imageTag = f'develop-{self.ranCommitID[0:8]}'
 			forceBaseImageBuild = True
 
 		# logging to OC Cluster and then switch to corresponding project
@@ -247,7 +308,7 @@ class Cluster:
 			self._recreate_bc('ran-base', baseTag, 'openshift/ran-base-bc.yaml')
 			ranbase_job = self._start_build('ran-base')
 			attemptedImages += ['ran-base']
-			status = ranbase_job is not None and self._wait_build_end([ranbase_job], 600)
+			status = ranbase_job is not None and self._wait_build_end([ranbase_job], 800)
 			if not status: logging.error('failure during build of ran-base')
 			self.cmd.run(f'oc logs {ranbase_job} &> cmake_targets/log/ran-base.log') # cannot use cmd.run because of redirect
 			# recover logs by mounting image
@@ -263,42 +324,49 @@ class Cluster:
 		if status:
 			self._recreate_is_tag('oai-physim', imageTag, 'openshift/oai-physim-is.yaml')
 			self._recreate_bc('oai-physim', imageTag, 'openshift/oai-physim-bc.yaml')
-			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.phySim.rhel8.2')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.phySim.rhel9')
 			physim_job = self._start_build('oai-physim')
 			attemptedImages += ['oai-physim']
 
 			self._recreate_is_tag('ran-build', imageTag, 'openshift/ran-build-is.yaml')
 			self._recreate_bc('ran-build', imageTag, 'openshift/ran-build-bc.yaml')
-			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.build.rhel8.2')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.build.rhel9')
 			ranbuild_job = self._start_build('ran-build')
 			attemptedImages += ['ran-build']
 
-			wait = ranbuild_job is not None and physim_job is not None and self._wait_build_end([ranbuild_job, physim_job], 1200)
-			if not wait: logging.error('error during build of ranbuild_job or physim_job')
+			self._recreate_is_tag('oai-clang', imageTag, 'openshift/oai-clang-is.yaml')
+			self._recreate_bc('oai-clang', imageTag, 'openshift/oai-clang-bc.yaml')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.clang.rhel9')
+			clang_job = self._start_build('oai-clang')
+			attemptedImages += ['oai-clang']
+
+			wait = ranbuild_job is not None and physim_job is not None and clang_job is not None and self._wait_build_end([ranbuild_job, physim_job, clang_job], 1200)
+			if not wait: logging.error('error during build of ranbuild_job or physim_job or clang_job')
 			status = status and wait
 			self.cmd.run(f'oc logs {ranbuild_job} &> cmake_targets/log/ran-build.log')
 			self.cmd.run(f'oc logs {physim_job} &> cmake_targets/log/oai-physim.log')
+			self.cmd.run(f'oc logs {clang_job} &> cmake_targets/log/oai-clang.log')
 			self.cmd.run(f'oc get pods.metrics.k8s.io &>> cmake_targets/log/build-metrics.log', '\$', 10)
 
 		if status:
 			self._recreate_is_tag('oai-enb', imageTag, 'openshift/oai-enb-is.yaml')
 			self._recreate_bc('oai-enb', imageTag, 'openshift/oai-enb-bc.yaml')
-			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.eNB.rhel8.2')
-			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.eNB.rhel8.2')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.eNB.rhel9')
+			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.eNB.rhel9')
 			enb_job = self._start_build('oai-enb')
 			attemptedImages += ['oai-enb']
 
 			self._recreate_is_tag('oai-gnb', imageTag, 'openshift/oai-gnb-is.yaml')
 			self._recreate_bc('oai-gnb', imageTag, 'openshift/oai-gnb-bc.yaml')
-			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.gNB.rhel8.2')
-			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.gNB.rhel8.2')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.gNB.rhel9')
+			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.gNB.rhel9')
 			gnb_job = self._start_build('oai-gnb')
 			attemptedImages += ['oai-gnb']
 
 			self._recreate_is_tag('oai-gnb-aw2s', imageTag, 'openshift/oai-gnb-aw2s-is.yaml')
 			self._recreate_bc('oai-gnb-aw2s', imageTag, 'openshift/oai-gnb-aw2s-bc.yaml')
-			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.gNB.aw2s.rhel8.2')
-			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.gNB.aw2s.rhel8.2')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.gNB.aw2s.rhel9')
+			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.gNB.aw2s.rhel9')
 			gnb_aw2s_job = self._start_build('oai-gnb-aw2s')
 			attemptedImages += ['oai-gnb-aw2s']
 
@@ -310,24 +378,32 @@ class Cluster:
 			self.cmd.run(f'oc logs {gnb_job} &> cmake_targets/log/oai-gnb.log')
 			self.cmd.run(f'oc logs {gnb_aw2s_job} &> cmake_targets/log/oai-gnb-aw2s.log')
 
+			self._recreate_is_tag('oai-nr-cuup', imageTag, 'openshift/oai-nr-cuup-is.yaml')
+			self._recreate_bc('oai-nr-cuup', imageTag, 'openshift/oai-nr-cuup-bc.yaml')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.nr-cuup.rhel9')
+			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.nr-cuup.rhel9')
+			nr_cuup_job = self._start_build('oai-nr-cuup')
+			attemptedImages += ['oai-nr-cuup']
+
 			self._recreate_is_tag('oai-lte-ue', imageTag, 'openshift/oai-lte-ue-is.yaml')
 			self._recreate_bc('oai-lte-ue', imageTag, 'openshift/oai-lte-ue-bc.yaml')
-			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.lteUE.rhel8.2')
-			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.lteUE.rhel8.2')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.lteUE.rhel9')
+			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.lteUE.rhel9')
 			lteue_job = self._start_build('oai-lte-ue')
 			attemptedImages += ['oai-lte-ue']
 
 			self._recreate_is_tag('oai-nr-ue', imageTag, 'openshift/oai-nr-ue-is.yaml')
 			self._recreate_bc('oai-nr-ue', imageTag, 'openshift/oai-nr-ue-bc.yaml')
-			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.nrUE.rhel8.2')
-			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.nrUE.rhel8.2')
+			self._retag_image_statement('ran-base', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-base', baseTag, 'docker/Dockerfile.nrUE.rhel9')
+			self._retag_image_statement('ran-build', 'image-registry.openshift-image-registry.svc:5000/oaicicd-ran/ran-build', imageTag, 'docker/Dockerfile.nrUE.rhel9')
 			nrue_job = self._start_build('oai-nr-ue')
 			attemptedImages += ['oai-nr-ue']
 
-			wait = lteue_job is not None and nrue_job is not None and self._wait_build_end([lteue_job, nrue_job], 600)
-			if not wait: logging.error('error during build of lteUE/nrUE')
+			wait = nr_cuup_job is not None and lteue_job is not None and nrue_job is not None and self._wait_build_end([nr_cuup_job, lteue_job, nrue_job], 600)
+			if not wait: logging.error('error during build of nr-cuup/lteUE/nrUE')
 			status = status and wait
 			# recover logs
+			self.cmd.run(f'oc logs {nr_cuup_job} &> cmake_targets/log/oai-nr-cuup.log')
 			self.cmd.run(f'oc logs {lteue_job} &> cmake_targets/log/oai-lte-ue.log')
 			self.cmd.run(f'oc logs {nrue_job} &> cmake_targets/log/oai-nr-ue.log')
 			self.cmd.run(f'oc get pods.metrics.k8s.io &>> cmake_targets/log/build-metrics.log', '\$', 10)

ci-scripts/cls_cmd.py

@@ -31,6 +31,9 @@ import subprocess as sp
 import os
 import paramiko
 import uuid
+import sys 
+
+SSHTIMEOUT=7
 
 # helper that returns either LocalCmd or RemoteCmd based on passed host name
 def getConnection(host, d=None):
@@ -115,21 +118,32 @@ class LocalCmd(Cmd):
 	def getBefore(self):
 		return self.cp.stdout
 
-	def copyin(self, scpIp, scpUser, scpPw, src, tgt):
-		self.run(f'cp -r {src} {tgt}')
+	def copyin(self, src, tgt, recursive=False):
+		if src[0] != '/' or tgt[0] != '/':
+			raise Exception('support only absolute file paths!')
+		opt = '-r' if recursive else ''
+		self.run(f'cp {opt} {src} {tgt}')
 
-	def copyout(self, scpIp, scpUser, scpPw, src, tgt):
-		self.run(f'cp -r {src} {tgt}')
+	def copyout(self, src, tgt, recursive=False):
+		self.copyin(src, tgt, recursive)
 
 class RemoteCmd(Cmd):
 	def __init__(self, hostname, d=None):
+		cIdx = 0
 		logging.getLogger('paramiko').setLevel(logging.ERROR) # prevent spamming through Paramiko
 		self.client = paramiko.SSHClient()
 		self.client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
 		cfg = RemoteCmd._lookup_ssh_config(hostname)
-		self.client.connect(**cfg)
 		self.cwd = d
 		self.cp = sp.CompletedProcess(args='', returncode=0, stdout='')
+		while cIdx < 3:
+			try:
+				self.client.connect(**cfg)
+				return
+			except:
+				logging.error(f'Could not connect to {hostname}, tried for {cIdx} time')
+				cIdx +=1
+		raise Exception ("Error: max retries, did not connect to host")
 
 	def _lookup_ssh_config(hostname):
 		ssh_config = paramiko.SSHConfig()
@@ -142,7 +156,7 @@ class RemoteCmd(Cmd):
 		ucfg = ssh_config.lookup(hostname)
 		if 'identityfile' not in ucfg or 'user' not in ucfg:
 			raise KeyError(f'no identityfile or user in SSH config for host {hostname}')
-		cfg = {'hostname':hostname, 'username':ucfg['user'], 'key_filename':ucfg['identityfile']}
+		cfg = {'hostname':hostname, 'username':ucfg['user'], 'key_filename':ucfg['identityfile'], 'timeout':SSHTIMEOUT}
 		if 'hostname' in ucfg:
 			cfg['hostname'] = ucfg['hostname'] # override user-given hostname with what is in config
 		if 'port' in ucfg:

ci-scripts/cls_containerize.py

@@ -31,8 +31,8 @@
 #-----------------------------------------------------------
 # Import
 #-----------------------------------------------------------
-import sys              # arg
-import re               # reg
+import sys	      # arg
+import re	       # reg
 import logging
 import os
 import shutil
@@ -47,15 +47,19 @@ from zipfile import ZipFile
 #-----------------------------------------------------------
 # OAI Testing modules
 #-----------------------------------------------------------
+import cls_cluster as OC
 import cls_cmd
 import sshconnection as SSH
 import helpreadme as HELP
 import constants as CONST
+import cls_oaicitest
 
 #-----------------------------------------------------------
 # Helper functions used here and in other classes
 # (e.g., cls_cluster.py)
 #-----------------------------------------------------------
+IMAGES = ['oai-enb', 'oai-lte-ru', 'oai-lte-ue', 'oai-gnb', 'oai-nr-cuup', 'oai-gnb-aw2s', 'oai-nr-ue']
+
 def CreateWorkspace(sshSession, sourcePath, ranRepository, ranCommitID, ranTargetBranch, ranAllowMerge):
 	if ranCommitID == '':
 		logging.error('need ranCommitID in CreateWorkspace()')
@@ -90,6 +94,15 @@ def CreateWorkspace(sshSession, sourcePath, ranRepository, ranCommitID, ranTarge
 		logging.debug(f'Merging with the target branch: {ranTargetBranch}')
 		sshSession.command(f'git merge --ff origin/{ranTargetBranch} -m "Temporary merge for CI"', '\$', 30)
 
+def ImageTagToUse(imageName, ranCommitID, ranBranch, ranAllowMerge):
+	shortCommit = ranCommitID[0:8]
+	if ranAllowMerge:
+		tagToUse = f'{ranBranch}-{shortCommit}'
+	else:
+		tagToUse = f'develop-{shortCommit}'
+	fullTag = f'{imageName}:{tagToUse}'
+	return fullTag
+
 def CopyLogsToExecutor(cmd, sourcePath, log_name):
 	cmd.cd(f'{sourcePath}/cmake_targets')
 	cmd.run(f'rm -f {log_name}.zip')
@@ -306,7 +319,6 @@ class Containerize():
 		self.registrySvrId = ''
 		self.testSvrId = ''
 		self.imageToPull = []
-
 		#checkers from xml
 		self.ran_checkers={}
 
@@ -349,7 +361,7 @@ class Containerize():
 			self.cliBuildOptions = '--no-cache'
 		elif self.host == 'Red Hat':
 			self.cli = 'sudo podman'
-			self.dockerfileprefix = '.rhel8.2'
+			self.dockerfileprefix = '.rhel9'
 			self.cliBuildOptions = '--no-cache --disable-compression'
 
 		# we always build the ran-build image with all targets
@@ -383,7 +395,7 @@ class Containerize():
 	
 		CreateWorkspace(cmd, lSourcePath, self.ranRepository, self.ranCommitID, self.ranTargetBranch, self.ranAllowMerge)
 
- 		# if asterix, copy the entitlement and subscription manager configurations
+		# if asterix, copy the entitlement and subscription manager configurations
 		if self.host == 'Red Hat':
 			cmd.run('mkdir -p ./etc-pki-entitlement ./rhsm-conf ./rhsm-ca')
 			cmd.run('cp /etc/rhsm/rhsm.conf ./rhsm-conf/')
@@ -649,15 +661,6 @@ class Containerize():
 		HTML.CreateHtmlTestRow('commit ' + tag, 'OK', CONST.ALL_PROCESSES_OK)
 		HTML.CreateHtmlNextTabHeaderTestRow(collectInfo, allImagesSize)
 
-	def ImageTagToUse(self, imageName):
-		shortCommit = self.ranCommitID[0:8]
-		if self.ranAllowMerge:
-			tagToUse = f'{self.ranBranch}-{shortCommit}'
-		else:
-			tagToUse = f'develop-{shortCommit}'
-		fullTag = f'porcepix.sboai.cs.eurecom.fr/{imageName}:{tagToUse}'
-		return fullTag
-
 	def Push_Image_to_Local_Registry(self, HTML):
 		if self.registrySvrId == '0':
 			lIpAddr = self.eNBIPAddress
@@ -680,8 +683,8 @@ class Containerize():
 		logging.debug('Pushing images from server: ' + lIpAddr)
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
-
-		mySSH.command('docker login -u oaicicd -p oaicicd porcepix.sboai.cs.eurecom.fr', '\$', 5)
+		imagePrefix = 'porcepix.sboai.cs.eurecom.fr'
+		mySSH.command(f'docker login -u oaicicd -p oaicicd {imagePrefix}', '\$', 5)
 		if re.search('Login Succeeded', mySSH.getBefore()) is None:
 			msg = 'Could not log into local registry'
 			logging.error(msg)
@@ -694,9 +697,9 @@ class Containerize():
 			orgTag = 'ci-temp'
 		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru', 'oai-nr-cuup']
 		for image in imageNames:
-			tagToUse = self.ImageTagToUse(image)
-			mySSH.command(f'docker image tag {image}:{orgTag} {tagToUse}', '\$', 5)
-			mySSH.command(f'docker push {tagToUse}', '\$', 120)
+			tagToUse = ImageTagToUse(image, self.ranCommitID, self.ranBranch, self.ranAllowMerge)
+			mySSH.command(f'docker image tag {image}:{orgTag} {imagePrefix}/{tagToUse}', '\$', 5)
+			mySSH.command(f'docker push {imagePrefix}/{tagToUse}', '\$', 120)
 			if re.search(': digest:', mySSH.getBefore()) is None:
 				logging.debug(mySSH.getBefore())
 				msg = f'Could not push {image} to local registry : {tagToUse}'
@@ -704,9 +707,9 @@ class Containerize():
 				mySSH.close()
 				HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
 				return False
-			mySSH.command(f'docker rmi {tagToUse} {image}:{orgTag}', '\$', 30)
+			mySSH.command(f'docker rmi {imagePrefix}/{tagToUse} {image}:{orgTag}', '\$', 30)
 
-		mySSH.command('docker logout porcepix.sboai.cs.eurecom.fr', '\$', 5)
+		mySSH.command(f'docker logout {imagePrefix}', '\$', 5)
 		if re.search('Removing login credentials', mySSH.getBefore()) is None:
 			msg = 'Could not log off from local registry'
 			logging.error(msg)
@@ -739,25 +742,18 @@ class Containerize():
 		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
-		if lIpAddr != 'none':
-			logging.debug('Pulling images onto server: ' + lIpAddr)
-			myCmd = cls_cmd.RemoteCmd(lIpAddr)
-		else:
-			logging.debug('Pulling images locally')
-			myCmd = cls_cmd.LocalCmd()
-
-		cmd = 'docker login -u oaicicd -p oaicicd porcepix.sboai.cs.eurecom.fr'
-		response = myCmd.run(cmd)
+		myCmd = cls_cmd.getConnection(lIpAddr)
+		imagePrefix = 'porcepix.sboai.cs.eurecom.fr'
+		response = myCmd.run(f'docker login -u oaicicd -p oaicicd {imagePrefix}')
 		if response.returncode != 0:
 			msg = 'Could not log into local registry'
 			logging.error(msg)
 			myCmd.close()
 			HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
 			return False
-
 		for image in self.imageToPull:
-			tagToUse = self.ImageTagToUse(image)
-			cmd = f'docker pull {tagToUse}'
+			tagToUse = ImageTagToUse(image, self.ranCommitID, self.ranBranch, self.ranAllowMerge)
+			cmd = f'docker pull {imagePrefix}/{tagToUse}'
 			response = myCmd.run(cmd, timeout=120)
 			if response.returncode != 0:
 				logging.debug(response)
@@ -766,16 +762,15 @@ class Containerize():
 				myCmd.close()
 				HTML.CreateHtmlTestRow('msg', 'KO', CONST.ALL_PROCESSES_OK)
 				return False
-
-		cmd = 'docker logout porcepix.sboai.cs.eurecom.fr'
-		response = myCmd.run(cmd)
+			myCmd.run(f'docker tag {imagePrefix}/{tagToUse} oai-ci/{tagToUse}')
+			myCmd.run(f'docker rmi {imagePrefix}/{tagToUse}')
+		response = myCmd.run(f'docker logout {imagePrefix}')
 		if response.returncode != 0:
 			msg = 'Could not log off from local registry'
 			logging.error(msg)
 			myCmd.close()
 			HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
 			return False
-
 		myCmd.close()
 		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
 		return True
@@ -808,9 +803,9 @@ class Containerize():
 			logging.debug('Removing test images locally')
 			myCmd = cls_cmd.LocalCmd()
 
-		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru', 'oai-nr-cuup']
-		for image in imageNames:
-			cmd = f'docker rmi {self.ImageTagToUse(image)}'
+		for image in IMAGES:
+			imageTag = ImageTagToUse(image, self.ranCommitID, self.ranBranch, self.ranAllowMerge)
+			cmd = f'docker rmi oai-ci/{imageTag}'
 			myCmd.run(cmd, reportNonZero=False)
 
 		myCmd.close()
@@ -845,12 +840,9 @@ class Containerize():
 
 		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
 		mySSH.command('cp docker-compose.y*ml ci-docker-compose.yml', '\$', 5)
-		imagesList = ['oai-enb', 'oai-gnb', 'oai-nr-cuup']
-		for image in imagesList:
-			imageToUse = self.ImageTagToUse(image)
-			mySSH.command(f'sed -i -e "s#image: {image}:latest#image: {imageToUse}#" ci-docker-compose.yml', '\$', 2)
-		localMmeIpAddr = EPC.MmeIPAddress
-		mySSH.command('sed -i -e "s/CI_MME_IP_ADDR/' + localMmeIpAddr + '/" ci-docker-compose.yml', '\$', 2)
+		for image in IMAGES:
+			imageTag = ImageTagToUse(image, self.ranCommitID, self.ranBranch, self.ranAllowMerge)
+			mySSH.command(f'sed -i -e "s#image: {image}:latest#image: oai-ci/{imageTag}#" ci-docker-compose.yml', '\$', 2)
 
 		# Currently support only one
 		svcName = self.services[self.eNB_instance]
@@ -884,10 +876,11 @@ class Containerize():
 				else:
 					time.sleep(10)
 					cnt += 1
+
 			mySSH.command('docker inspect --format="ImageUsed: {{.Config.Image}}" ' + containerName, '\$', 5)
 			for stdoutLine in mySSH.getBefore().split('\n'):
-				if stdoutLine.count('ImageUsed: porcepix'):
-					usedImage = stdoutLine.replace('ImageUsed: porcepix', 'porcepix').strip()
+				if stdoutLine.count('ImageUsed: oai-ci'):
+					usedImage = stdoutLine.replace('ImageUsed: oai-ci', 'oai-ci').strip()
 					logging.debug('Used image is ' + usedImage)
 			if usedImage != '':
 				mySSH.command('docker image inspect --format "* Size     = {{.Size}} bytes\n* Creation = {{.Created}}\n* Id       = {{.Id}}" ' + usedImage, '\$', 5, silent=True)
@@ -910,7 +903,7 @@ class Containerize():
 			cnt = 0
 			while (cnt < 20):
 				mySSH.command('docker logs ' + containerName + ' | egrep --text --color=never -i "wait|sync|Starting"', '\$', 30)
-				result = re.search('got sync|Starting F1AP at CU', mySSH.getBefore())
+				result = re.search('got sync|Starting F1AP at CU|Got sync|Waiting for RUs to be configured', mySSH.getBefore())
 				if result is None:
 					time.sleep(6)
 					cnt += 1
@@ -966,6 +959,7 @@ class Containerize():
 		logging.debug('\u001B[1m Undeploying OAI Object from server: ' + lIpAddr + '\u001B[0m')
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
+
 		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
 
 		svcName = self.services[self.eNB_instance]
@@ -981,7 +975,7 @@ class Containerize():
 		for s in allServices:
 			mySSH.command(f'docker-compose -f ci-docker-compose.yml ps --all -- {s}', '\$', 5, silent=False)
 			running = mySSH.getBefore().split('\r\n')[2:-1]
-			#logging.debug(f'running services: {running}')
+			logging.debug(f'running services: {running}')
 			if len(running) > 0: # something is running for that service
 				services.append(s)
 		logging.info(f'stopping services {services}')
@@ -999,7 +993,6 @@ class Containerize():
 		mySSH.command('docker volume prune --force', '\$', 20)
 
 		mySSH.close()
-
 		# Analyzing log file!
 		files = ','.join([f'{s}-{HTML.testCase_id}' for s in services])
 		if len(services) > 1:
@@ -1011,6 +1004,16 @@ class Containerize():
 			HTML.htmleNBFailureMsg='Could not copy logfile to analyze it!'
 			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
 			self.exitStatus = 1
+		# use function for UE log analysis, when oai-nr-ue container is used
+		elif 'oai-nr-ue' in services:
+			self.exitStatus == 0
+			logging.debug('\u001B[1m Analyzing UE logfile ' + filename + ' \u001B[0m')
+			logStatus = cls_oaicitest.OaiCiTest().AnalyzeLogFile_UE(f'{filename}', HTML, RAN)
+			if (logStatus < 0):
+				fullStatus = False
+				HTML.CreateHtmlTestRow('UE log Analysis', 'KO', logStatus)
+			else:
+				HTML.CreateHtmlTestRow('UE log Analysis', 'OK', CONST.ALL_PROCESSES_OK)
 		else:
 			for svcName in services:
 				filename = f'{svcName}-{HTML.testCase_id}.log'
@@ -1050,13 +1053,12 @@ class Containerize():
 			myCmd.close()
 			HTML.CreateHtmlTestRow('SVC not Found', 'KO', CONST.ALL_PROCESSES_OK)
 			return
-
 		cmd = 'cp docker-compose.y*ml docker-compose-ci.yml'
 		myCmd.run(cmd, silent=self.displayedNewTags)
 		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru', 'oai-nr-cuup']
 		for image in imageNames:
-			tagToUse = self.ImageTagToUse(image)
-			cmd = f'sed -i -e "s@oaisoftwarealliance/{image}:develop@{tagToUse}@" docker-compose-ci.yml'
+			tagToUse = ImageTagToUse(image, self.ranCommitID, self.ranBranch, self.ranAllowMerge)
+			cmd = f'sed -i -e "s@oaisoftwarealliance/{image}:develop@oai-ci/{tagToUse}@" docker-compose-ci.yml'
 			myCmd.run(cmd, silent=self.displayedNewTags)
 		self.displayedNewTags = True
 
@@ -1193,13 +1195,11 @@ class Containerize():
 		ymlPath = self.yamlPath[0].split('/')
 		logPath = '../cmake_targets/log/' + ymlPath[1]
 		myCmd = cls_cmd.LocalCmd(d = self.yamlPath[0])
-
 		cmd = 'cp docker-compose.y*ml docker-compose-ci.yml'
 		myCmd.run(cmd, silent=self.displayedNewTags)
-		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru', 'oai-nr-cuup']
-		for image in imageNames:
-			tagToUse = self.ImageTagToUse(image)
-			cmd = f'sed -i -e "s@oaisoftwarealliance/{image}:develop@{tagToUse}@" docker-compose-ci.yml'
+		for image in IMAGES:
+			tagToUse = ImageTagToUse(image, self.ranCommitID, self.ranBranch, self.ranAllowMerge)
+			cmd = f'sed -i -e "s@oaisoftwarealliance/{image}:develop@oai-ci/{tagToUse}@" docker-compose-ci.yml'
 			myCmd.run(cmd, silent=self.displayedNewTags)
 		self.displayedNewTags = True
 
@@ -1349,62 +1349,6 @@ class Containerize():
 
 		HTML.CreateHtmlTestRowQueue(self.pingOptions, 'OK', [message])
 
-	def PingFromContainer(self, HTML, RAN, UE):
-		myCmd = cls_cmd.LocalCmd()
-		self.exitStatus = 0
-		ymlPath = self.yamlPath[0].split('/')
-		logPath = '../cmake_targets/log/' + ymlPath[1]
-		cmd = f'mkdir -p {logPath}'
-		myCmd.run(cmd, silent=True)
-
-		cmd = f'docker exec {self.pingContName} /bin/bash -c "ping {self.pingOptions}" 2>&1 | tee {logPath}/ping_{HTML.testCase_id}.log'
-		pingStatus = myCmd.run(cmd, timeout=100, reportNonZero=False)
-		myCmd.close()
-
-		result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', pingStatus.stdout)
-		if result is None:
-			self.PingExit(HTML, RAN, UE, False, 'Packet Loss Not Found')
-			return
-
-		packetloss = result.group('packetloss')
-		if float(packetloss) == 100:
-			self.PingExit(HTML, RAN, UE, False, 'Packet Loss is 100%')
-			return
-
-		result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', pingStatus.stdout)
-		if result is None:
-			self.PingExit(HTML, RAN, UE, False, 'Ping RTT_Min RTT_Avg RTT_Max Not Found!')
-			return
-
-		rtt_min = result.group('rtt_min')
-		rtt_avg = result.group('rtt_avg')
-		rtt_max = result.group('rtt_max')
-		pal_msg = 'Packet Loss : ' + packetloss + '%'
-		min_msg = 'RTT(Min)    : ' + rtt_min + ' ms'
-		avg_msg = 'RTT(Avg)    : ' + rtt_avg + ' ms'
-		max_msg = 'RTT(Max)    : ' + rtt_max + ' ms'
-
-		message = 'ping result\n'
-		message += '    ' + pal_msg + '\n'
-		message += '    ' + min_msg + '\n'
-		message += '    ' + avg_msg + '\n'
-		message += '    ' + max_msg + '\n'
-		packetLossOK = True
-		if float(packetloss) > float(self.pingLossThreshold):
-			message += '\nPacket Loss too high'
-			packetLossOK = False
-		elif float(packetloss) > 0:
-			message += '\nPacket Loss is not 0%'
-		self.PingExit(HTML, RAN, UE, packetLossOK, message)
-
-		if packetLossOK:
-			logging.debug('\u001B[1;37;44m ping result \u001B[0m')
-			logging.debug('\u001B[1;34m    ' + pal_msg + '\u001B[0m')
-			logging.debug('\u001B[1;34m    ' + min_msg + '\u001B[0m')
-			logging.debug('\u001B[1;34m    ' + avg_msg + '\u001B[0m')
-			logging.debug('\u001B[1;34m    ' + max_msg + '\u001B[0m')
-			logging.info('\u001B[1m Ping Test PASS\u001B[0m')
-
 	def PingExit(self, HTML, RAN, UE, status, message):
 		if status:
 			HTML.CreateHtmlTestRowQueue(self.pingOptions, 'OK', [message])

ci-scripts/cls_module_ue.py

@@ -54,7 +54,7 @@ class Module_UE:
 				"detach": m.get('DetachScript'),
 				"initialize": m.get('InitScript'),
 				"terminate": m.get('TermScript'),
-				"getNetwork": m.get('UENetworkScript'),
+				"getNetwork": m.get('NetworkScript'),
 				"check": m.get('CheckStatusScript'),
 				"dataEnable": m.get('DataEnableScript'),
 				"dataDisable": m.get('DataDisableScript'),
@@ -81,7 +81,7 @@ class Module_UE:
 			c = cls_cmd.RemoteCmd(self.host)
 		response = c.run(cmd, silent=silent)
 		c.close()
-		return response.stdout
+		return response
 
 #-----------------$
 #PUBLIC Methods$
@@ -95,7 +95,11 @@ class Module_UE:
 		if self.cmd_dict["detach"]:
 			self._command(self.cmd_dict["detach"], silent=True)
 		self._command(self.cmd_dict["terminate"], silent=True)
-		self._command(self.cmd_dict["initialize"])
+		ret = self._command(self.cmd_dict["initialize"])
+		logging.info(f'For command: {ret.args} | return output: {ret.stdout} | Code: {ret.returncode}')
+		# Here each UE returns differently for the successful initialization, requires check based on UE
+		return ret.returncode == 0
+
 
 	def terminate(self):
 		self._command(self.cmd_dict["terminate"])
@@ -122,9 +126,9 @@ class Module_UE:
 			self._command(self.cmd_dict["detach"])
 			time.sleep(5)
 		if ip:
-			logging.debug(f'\u001B[1mUE IP Address is {ip}\u001B[0m')
+			logging.debug(f'\u001B[1mUE IP Address for UE {self.module_name} is {ip}\u001B[0m')
 		else:
-			logging.debug('\u001B[1;37;41mUE IP Address Not Found!\u001B[0m')
+			logging.debug(f'\u001B[1;37;41mUE IP Address for UE {self.module_name} Not Found!\u001B[0m')
 		return ip
 
 	def detach(self):
@@ -133,7 +137,7 @@ class Module_UE:
 	def check(self):
 		cmd = self.cmd_dict["check"]
 		if cmd:
-			return self._command(cmd)
+			return self._command(cmd).stdout
 		else:
 			logging.warning(f"requested status check of UE {self.getName()}, but operation is not supported")
 			return f"UE {self.getName()} does not support status checking"
@@ -160,7 +164,7 @@ class Module_UE:
 
 	def getIP(self):
 		output = self._command(self.cmd_dict["getNetwork"], silent=True)
-		result = re.search('inet (?P<ip>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)', output)
+		result = re.search('inet (?P<ip>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)', output.stdout)
 		if result and result.group('ip'):
 			ip = result.group('ip')
 			return ip
@@ -168,12 +172,12 @@ class Module_UE:
 
 	def checkMTU(self):
 		output = self._command(self.cmd_dict["getNetwork"], silent=True)
-		result = re.search('mtu (?P<mtu>[0-9]+)', output)
+		result = re.search('mtu (?P<mtu>[0-9]+)', output.stdout)
 		if result and result.group('mtu') and int(result.group('mtu')) == self.MTU:
-			logging.debug('\u001B[1mUE Module NIC MTU is ' + str(self.MTU) + ' as expected\u001B[0m')
+			logging.debug(f'\u001B[1mUE Module {self.module_name} NIC MTU is {self.MTU} as expected\u001B[0m')
 			return True
 		else:
-			logging.debug('\u001B[1;37;41m Incorrect Module NIC MTU or MTU not found! Expected: ' + str(self.MTU) + '\u001B[0m')
+			logging.debug(f'\u001B[1;37;41m UE module {self.module_name} has incorrect Module NIC MTU or MTU not found! Expected: {self.MTU} \u001B[0m')
 			return False
 
 	def getName(self):

ci-scripts/cls_physim1.py

@@ -114,7 +114,7 @@ class PhySim:
 				logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
 				mySSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 30)
 		else:
-			imageTag = "develop"
+			imageTag = f'develop-{self.ranCommitID[0:8]}'
 
 		# logging to OC Cluster and then switch to corresponding project
 		mySSH.command(f'oc login -u {ocUserName} -p {ocPassword} --server https://api.oai.cs.eurecom.fr:6443', '\$', 30)

ci-scripts/cls_static_code_analysis.py

@@ -42,9 +42,10 @@ from multiprocessing import Process, Lock, SimpleQueue
 #-----------------------------------------------------------
 # OAI Testing modules
 #-----------------------------------------------------------
-import sshconnection as SSH
 import helpreadme as HELP
 import constants as CONST
+import cls_cmd
+from cls_containerize import CreateWorkspace
 
 #-----------------------------------------------------------
 # Class Declaration
@@ -95,53 +96,31 @@ class StaticCodeAnalysis():
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
 		logging.debug('Building on server: ' + lIpAddr)
-		mySSH = SSH.SSHConnection()
-		mySSH.open(lIpAddr, lUserName, lPassWord)
-
+		cmd = cls_cmd.getConnection(lIpAddr)
 		self.testCase_id = HTML.testCase_id
-
 		# on RedHat/CentOS .git extension is mandatory
 		result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
 		if result is not None:
 			full_ran_repo_name = self.ranRepository.replace('git/', 'git')
 		else:
 			full_ran_repo_name = self.ranRepository + '.git'
-		mySSH.command('mkdir -p ' + lSourcePath, '\$', 5)
-		mySSH.command('cd ' + lSourcePath, '\$', 5)
-		mySSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600)
-		# Raphael: here add a check if git clone or git fetch went smoothly
-		mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
-		mySSH.command('git config user.name "OAI Jenkins"', '\$', 5)
 
-		mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
-		mySSH.command('mkdir -p cmake_targets/log', '\$', 5)
-		# if the commit ID is provided use it to point to it
-		if self.ranCommitID != '':
-			mySSH.command('git checkout -f ' + self.ranCommitID, '\$', 30)
-		# if the branch is not develop, then it is a merge request and we need to do
-		# the potential merge. Note that merge conflicts should already been checked earlier
-		if (self.ranAllowMerge):
-			if self.ranTargetBranch == '':
-				if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
-					mySSH.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 30)
-			else:
-				logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
-				mySSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 30)
+		CreateWorkspace(cmd, lSourcePath, full_ran_repo_name, self.ranCommitID, self.ranTargetBranch, self.ranAllowMerge)
 
-		mySSH.command('docker image rm oai-cppcheck:bionic oai-cppcheck:focal || true', '\$', 60)
-		mySSH.command('sed -e "s@xenial@bionic@" ci-scripts/docker/Dockerfile.cppcheck.xenial > ci-scripts/docker/Dockerfile.cppcheck.bionic', '\$', 6)
-		mySSH.command('docker build --tag oai-cppcheck:bionic --file ci-scripts/docker/Dockerfile.cppcheck.bionic . > cmake_targets/log/cppcheck-bionic.txt 2>&1', '\$', 600)
-		mySSH.command('sed -e "s@xenial@focal@" ci-scripts/docker/Dockerfile.cppcheck.xenial > ci-scripts/docker/Dockerfile.cppcheck.focal', '\$', 6)
-		mySSH.command('docker build --tag oai-cppcheck:focal --file ci-scripts/docker/Dockerfile.cppcheck.focal . > cmake_targets/log/cppcheck-focal.txt 2>&1', '\$', 600)
-		mySSH.command('docker image rm oai-cppcheck:bionic oai-cppcheck:focal || true', '\$', 30)
+		logDir = f'{lSourcePath}/cmake_targets/build_log_{self.testCase_id}'
+		cmd.run(f'mkdir -p {logDir}')
+		cmd.run('docker image rm oai-cppcheck:bionic oai-cppcheck:focal')
+		cmd.run(f'sed -e "s@xenial@bionic@" {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.xenial > {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.bionic')
+		cmd.run(f'docker build --tag oai-cppcheck:bionic --file {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.bionic . > {logDir}/cppcheck-bionic.txt 2>&1')
+		cmd.run(f'sed -e "s@xenial@focal@" {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.xenial > {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.focal')
+		cmd.run(f'docker build --tag oai-cppcheck:focal --file {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.focal . > {logDir}/cppcheck-focal.txt 2>&1')
+		cmd.run('docker image rm oai-cppcheck:bionic oai-cppcheck:focal')
 
 		# Analyzing the logs
-		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
-		mySSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
-		mySSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
-		mySSH.close()
+		cmd.copyin(f'{logDir}/cppcheck-bionic.txt', 'cppcheck-bionic.txt')
+		cmd.copyin(f'{logDir}/cppcheck-focal.txt', 'cppcheck-focal.txt')
+		cmd.close()
 
-		mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/build_log_' + self.testCase_id + '/*', '.')
 		CCR = CppCheckResults()
 		CCR_ref = CppCheckResults()
 		vId = 0
@@ -163,7 +142,7 @@ class StaticCodeAnalysis():
 				xmlStart = False
 				with open('./cppcheck-'+ variant + '.txt', 'r') as logfile:
 					for line in logfile:
-						ret = re.search('Unpacking cppcheck \((?P<version>[0-9\.]+)', str(line))
+						ret = re.search('cppcheck version="(?P<version>[0-9\.]+)"', str(line))
 						if ret is not None:
 						   CCR.versions[vId] = ret.group('version')
 						if re.search('RUN cat cmake_targets/log/cppcheck.xml', str(line)) is not None:
@@ -251,57 +230,37 @@ class StaticCodeAnalysis():
 			HELP.GenericHelp(CONST.Version)
 			sys.exit('Insufficient Parameter')
 		logging.debug('Building on server: ' + lIpAddr)
-		mySSH = SSH.SSHConnection()
-		mySSH.open(lIpAddr, lUserName, lPassWord)
-
+		cmd = cls_cmd.getConnection(lIpAddr)
 		self.testCase_id = HTML.testCase_id
-
 		# on RedHat/CentOS .git extension is mandatory
 		result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
 		if result is not None:
 			full_ran_repo_name = self.ranRepository.replace('git/', 'git')
 		else:
 			full_ran_repo_name = self.ranRepository + '.git'
-		mySSH.command('mkdir -p ' + lSourcePath, '\$', 5)
-		mySSH.command('cd ' + lSourcePath, '\$', 5)
-		mySSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600)
-		# Raphael: here add a check if git clone or git fetch went smoothly
-		mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
-		mySSH.command('git config user.name "OAI Jenkins"', '\$', 5)
 
-		mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30)
-		mySSH.command('mkdir -p cmake_targets/log', '\$', 5)
-		# if the commit ID is provided use it to point to it
-		if self.ranCommitID != '':
-			mySSH.command('git checkout -f ' + self.ranCommitID, '\$', 30)
-		# if the branch is not develop, then it is a merge request and we need to do
-		# the potential merge. Note that merge conflicts should already been checked earlier
-		argToPass = ''
-		if (self.ranAllowMerge):
-			argToPass = '--build-arg MERGE_REQUEST=true --build-arg SRC_BRANCH=' + self.ranBranch
+		CreateWorkspace(cmd, lSourcePath, full_ran_repo_name, self.ranCommitID, self.ranTargetBranch, self.ranAllowMerge)
+		check_options = ''
+		if self.ranAllowMerge:
+			check_options = f'--build-arg MERGE_REQUEST=true --build-arg SRC_BRANCH={self.ranBranch}'
 			if self.ranTargetBranch == '':
-				if (self.ranBranch != 'develop') and (self.ranBranch != 'origin/develop'):
-					mySSH.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 30)
-					argToPass += ' --build-arg TARGET_BRANCH=develop '
+				if self.ranBranch != 'develop' and self.ranBranch != 'origin/develop':
+					check_options += ' --build-arg TARGET_BRANCH=develop'
 			else:
-				logging.debug('Merging with the target branch: ' + self.ranTargetBranch)
-				mySSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 30)
-				argToPass += ' --build-arg TARGET_BRANCH=' + self.ranTargetBranch + ' '
+				check_options += f' --build-arg TARGET_BRANCH={self.ranTargetBranch}'
 
-		mySSH.command('docker image rm oai-formatting-check:latest || true', '\$', 60)
-		mySSH.command('docker build --target oai-formatting-check --tag oai-formatting-check:latest ' + argToPass + '--file ci-scripts/docker/Dockerfile.formatting.bionic . > cmake_targets/log/oai-formatting-check.txt 2>&1', '\$', 600)
+		logDir = f'{lSourcePath}/cmake_targets/build_log_{self.testCase_id}'
+		cmd.run(f'mkdir -p {logDir}')
+		cmd.run('docker image rm oai-formatting-check:latest')
+		cmd.run(f'docker build --target oai-formatting-check --tag oai-formatting-check:latest {check_options} --file {lSourcePath}/ci-scripts/docker/Dockerfile.formatting.bionic . > {logDir}/oai-formatting-check.txt 2>&1')
 
-		mySSH.command('docker image rm oai-formatting-check:latest || true', '\$', 60)
-		mySSH.command('docker image prune --force', '\$', 60)
-		mySSH.command('docker volume prune --force', '\$', 60)
+		cmd.run('docker image rm oai-formatting-check:latest')
+		cmd.run('docker image prune --force')
+		cmd.run('docker volume prune --force')
 
 		# Analyzing the logs
-		mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5)
-		mySSH.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
-		mySSH.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
-		mySSH.close()
-
-		mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/build_log_' + self.testCase_id + '/*', '.')
+		cmd.copyin(f'{logDir}/oai-formatting-check.txt', 'oai-formatting-check.txt')
+		cmd.close()
 
 		finalStatus = 0
 		if (os.path.isfile('./oai-formatting-check.txt')):

ci-scripts/conf_files/README.md

@@ -29,7 +29,8 @@ Examples:
 - standard monolithic gNB, 2x2 configuration, with SDAP: `gnb.sa.band78.162prb.usrpn310.2x2-sdap.conf`
 - gNB-CU: `gnb-cu.sa.f1.conf`
 - monolithic gNB, L2sim: `gnb.sa.band77.106prb.l2sim.conf`
-- RCC (4G eNB with IF4.5 split): `enb.band40.25prb.if45.tm1-fairscheduler.conf`
+- monolithic eNB: `enb.band7.25prb.usrpb200.conf`
+- RCC (4G eNB with IF4.5 split): `enb-rcc.band7.25prb.tm1.if4p5.conf`
 
 Notes:
 - there is no need for TDD/FDD, this is encoded in the band number

ci-scripts/conf_files/cu.band7.tm1.100PRB.conf

@@ -1,207 +0,0 @@
-Active_eNBs = ( "eNB-CU-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs = (
-  {
-    ////////// Identification parameters:
-    eNB_ID    = 0xe00;
-
-    cell_type = "CELL_MACRO_ENB";
-
-    eNB_name  = "eNB-CU-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
-
-    nr_cellid = 12345678L
-
-    tr_s_preference  = "f1"
-
-    local_s_if_name  = "lo";
-    remote_s_address = "127.0.0.3";
-    local_s_address  = "127.0.0.4";
-    local_s_portc    = 501;
-    remote_s_portc   = 500;
-    local_s_portd    = 601;
-    remote_s_portd   = 600;
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-        node_function                           = "3GPP_eNodeB";
-        node_timing                             = "synch_to_ext_device";
-        node_synch_ref                          = 0;
-        frame_type                              = "FDD";
-        tdd_config                              = 3;
-        tdd_config_s                            = 0;
-        prefix_type                             = "NORMAL";
-        eutra_band                              = 7;
-        downlink_frequency                      = 2680000000L;
-        uplink_frequency_offset                 = -120000000;
-        Nid_cell                                = 0;
-        N_RB_DL                                 = 100;
-        pbch_repetition                         = "FALSE";
-        prach_root                              = 0;
-        prach_config_index                      = 0;
-        prach_high_speed                        = "DISABLE";
-        prach_zero_correlation                  = 1;
-        prach_freq_offset                       = 2;
-        pucch_delta_shift                       = 1;
-        pucch_nRB_CQI                           = 0;
-        pucch_nCS_AN                            = 0;
-        pucch_n1_AN                             = 0;
-        pdsch_referenceSignalPower              = -29;
-        pdsch_p_b                               = 0;
-        pusch_n_SB                              = 1;
-        pusch_enable64QAM                       = "DISABLE";
-        pusch_hoppingMode                       = "interSubFrame";
-        pusch_hoppingOffset                     = 0;
-        pusch_groupHoppingEnable                = "ENABLE";
-        pusch_groupAssignment                   = 0;
-        pusch_sequenceHoppingEnabled            = "DISABLE";
-        pusch_nDMRS1                            = 1;
-        phich_duration                          = "NORMAL";
-        phich_resource                          = "ONESIXTH";
-        srs_enable                              = "DISABLE";
-        /*
-        srs_BandwidthConfig                     =;
-        srs_SubframeConfig                      =;
-        srs_ackNackST                           =;
-        srs_MaxUpPts                            =;
-        */
-
-        pusch_p0_Nominal                        = -96;
-        pusch_alpha                             = "AL1";
-        pucch_p0_Nominal                        = -104;
-        msg3_delta_Preamble                     = 6;
-        pucch_deltaF_Format1                    = "deltaF2";
-        pucch_deltaF_Format1b                   = "deltaF3";
-        pucch_deltaF_Format2                    = "deltaF0";
-        pucch_deltaF_Format2a                   = "deltaF0";
-        pucch_deltaF_Format2b                   = "deltaF0";
-
-        rach_numberOfRA_Preambles               = 64;
-        rach_preamblesGroupAConfig              = "DISABLE";
-        /*
-        rach_sizeOfRA_PreamblesGroupA           = ;
-        rach_messageSizeGroupA                  = ;
-        rach_messagePowerOffsetGroupB           = ;
-        */
-        rach_powerRampingStep                   = 4;
-        rach_preambleInitialReceivedTargetPower = -108;
-        rach_preambleTransMax                   = 10;
-        rach_raResponseWindowSize               = 10;
-        rach_macContentionResolutionTimer       = 48;
-        rach_maxHARQ_Msg3Tx                     = 4;
-
-        pcch_default_PagingCycle                = 128;
-        pcch_nB                                 = "oneT";
-        bcch_modificationPeriodCoeff= 2;
-        ue_TimersAndConstants_t300              = 1000;
-        ue_TimersAndConstants_t301              = 1000;
-        ue_TimersAndConstants_t310              = 1000;
-        ue_TimersAndConstants_t311              = 10000;
-        ue_TimersAndConstants_n310              = 20;
-        ue_TimersAndConstants_n311              = 1;
-        ue_TransmissionMode                     = 1;
-
-        //Parameters for SIB18
-        rxPool_sc_CP_Len                                       = "normal";
-        rxPool_sc_Period                                       = "sf40";
-        rxPool_data_CP_Len                                     = "normal";
-        rxPool_ResourceConfig_prb_Num                          = 20;
-        rxPool_ResourceConfig_prb_Start                        = 5;
-        rxPool_ResourceConfig_prb_End                          = 44;
-        rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-        rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-        rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-        /*
-        rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-        rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-        rxPool_dataHoppingConfig_rbOffset                               = 0;
-        rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-        */
-
-        // Parameters for SIB19
-        discRxPool_cp_Len                                               = "normal"
-        discRxPool_discPeriod                                           = "rf32"
-        discRxPool_numRetx                                              = 1;
-        discRxPool_numRepetition                                        = 2;
-        discRxPool_ResourceConfig_prb_Num                               = 5;
-        discRxPool_ResourceConfig_prb_Start                             = 3;
-        discRxPool_ResourceConfig_prb_End                               = 21;
-        discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-        discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-        discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-      }
-    );
-
-
-    srb1_parameters :
-    {
-      # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-      timer_poll_retransmit    = 80;
-
-      # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-      timer_reordering         = 35;
-
-      # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-      timer_status_prohibit    = 0;
-
-      # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-      poll_pdu                 =  4;
-
-      # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-      poll_byte                =  99999;
-
-      # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-      max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-      # Number of streams to use in input/output
-      SCTP_INSTREAMS  = 2;
-      SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address  = (
-      {
-        ipv4       = "CI_MME_IP_ADDR";
-        ipv6       = "192:168:30::17";
-        port       = 36412 ;
-        active     = "yes";
-        preference = "ipv4";
-      }
-    );
-
-    NETWORK_INTERFACES : {
-      ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1_MME   = "CI_ENB_IP_ADDR";
-      ENB_INTERFACE_NAME_FOR_S1U    = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1U      = "CI_ENB_IP_ADDR";
-      ENB_PORT_FOR_S1U              = 2152; # Spec 2152
-      ENB_IPV4_ADDRESS_FOR_X2C      = "CI_ENB_IP_ADDR";
-      ENB_PORT_FOR_X2C              = 36422; # Spec 36422
-    };
-  }
-);
-
-log_config = {
-  global_log_level            = "info";
-  pdcp_log_level              = "info";
-  rrc_log_level               = "info";
-  gtp_log_level               = "info";
-};

ci-scripts/conf_files/cu.band7.tm1.25PRB.conf

@@ -1,207 +0,0 @@
-Active_eNBs = ( "eNB-CU-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs = (
-  {
-    ////////// Identification parameters:
-    eNB_ID    = 0xe00;
-
-    cell_type = "CELL_MACRO_ENB";
-
-    eNB_name  = "eNB-CU-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
-
-    nr_cellid = 12345678L
-
-    tr_s_preference  = "f1"
-
-    local_s_if_name  = "lo";
-    remote_s_address = "127.0.0.3";
-    local_s_address  = "127.0.0.4";
-    local_s_portc    = 501;
-    remote_s_portc   = 500;
-    local_s_portd    = 601;
-    remote_s_portd   = 600;
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-        node_function                           = "3GPP_eNodeB";
-        node_timing                             = "synch_to_ext_device";
-        node_synch_ref                          = 0;
-        frame_type                              = "FDD";
-        tdd_config                              = 3;
-        tdd_config_s                            = 0;
-        prefix_type                             = "NORMAL";
-        eutra_band                              = 7;
-        downlink_frequency                      = 2680000000L;
-        uplink_frequency_offset                 = -120000000;
-        Nid_cell                                = 0;
-        N_RB_DL                                 = 25;
-        pbch_repetition                         = "FALSE";
-        prach_root                              = 0;
-        prach_config_index                      = 0;
-        prach_high_speed                        = "DISABLE";
-        prach_zero_correlation                  = 1;
-        prach_freq_offset                       = 2;
-        pucch_delta_shift                       = 1;
-        pucch_nRB_CQI                           = 0;
-        pucch_nCS_AN                            = 0;
-        pucch_n1_AN                             = 0;
-        pdsch_referenceSignalPower              = -25;
-        pdsch_p_b                               = 0;
-        pusch_n_SB                              = 1;
-        pusch_enable64QAM                       = "DISABLE";
-        pusch_hoppingMode                       = "interSubFrame";
-        pusch_hoppingOffset                     = 0;
-        pusch_groupHoppingEnable                = "ENABLE";
-        pusch_groupAssignment                   = 0;
-        pusch_sequenceHoppingEnabled            = "DISABLE";
-        pusch_nDMRS1                            = 1;
-        phich_duration                          = "NORMAL";
-        phich_resource                          = "ONESIXTH";
-        srs_enable                              = "DISABLE";
-        /*
-        srs_BandwidthConfig                     =;
-        srs_SubframeConfig                      =;
-        srs_ackNackST                           =;
-        srs_MaxUpPts                            =;
-        */
-
-        pusch_p0_Nominal                        = -96;
-        pusch_alpha                             = "AL1";
-        pucch_p0_Nominal                        = -104;
-        msg3_delta_Preamble                     = 6;
-        pucch_deltaF_Format1                    = "deltaF2";
-        pucch_deltaF_Format1b                   = "deltaF3";
-        pucch_deltaF_Format2                    = "deltaF0";
-        pucch_deltaF_Format2a                   = "deltaF0";
-        pucch_deltaF_Format2b                   = "deltaF0";
-
-        rach_numberOfRA_Preambles               = 64;
-        rach_preamblesGroupAConfig              = "DISABLE";
-        /*
-        rach_sizeOfRA_PreamblesGroupA           = ;
-        rach_messageSizeGroupA                  = ;
-        rach_messagePowerOffsetGroupB           = ;
-        */
-        rach_powerRampingStep                   = 4;
-        rach_preambleInitialReceivedTargetPower = -108;
-        rach_preambleTransMax                   = 10;
-        rach_raResponseWindowSize               = 10;
-        rach_macContentionResolutionTimer       = 48;
-        rach_maxHARQ_Msg3Tx                     = 4;
-
-        pcch_default_PagingCycle                = 128;
-        pcch_nB                                 = "oneT";
-        bcch_modificationPeriodCoeff= 2;
-        ue_TimersAndConstants_t300              = 1000;
-        ue_TimersAndConstants_t301              = 1000;
-        ue_TimersAndConstants_t310              = 1000;
-        ue_TimersAndConstants_t311              = 10000;
-        ue_TimersAndConstants_n310              = 20;
-        ue_TimersAndConstants_n311              = 1;
-        ue_TransmissionMode                     = 1;
-
-        //Parameters for SIB18
-        rxPool_sc_CP_Len                                       = "normal";
-        rxPool_sc_Period                                       = "sf40";
-        rxPool_data_CP_Len                                     = "normal";
-        rxPool_ResourceConfig_prb_Num                          = 20;
-        rxPool_ResourceConfig_prb_Start                        = 5;
-        rxPool_ResourceConfig_prb_End                          = 44;
-        rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-        rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-        rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-        /*
-        rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-        rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-        rxPool_dataHoppingConfig_rbOffset                               = 0;
-        rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-        */
-
-        // Parameters for SIB19
-        discRxPool_cp_Len                                               = "normal"
-        discRxPool_discPeriod                                           = "rf32"
-        discRxPool_numRetx                                              = 1;
-        discRxPool_numRepetition                                        = 2;
-        discRxPool_ResourceConfig_prb_Num                               = 5;
-        discRxPool_ResourceConfig_prb_Start                             = 3;
-        discRxPool_ResourceConfig_prb_End                               = 21;
-        discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-        discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-        discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-      }
-    );
-
-
-    srb1_parameters :
-    {
-      # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-      timer_poll_retransmit    = 80;
-
-      # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-      timer_reordering         = 35;
-
-      # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-      timer_status_prohibit    = 0;
-
-      # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-      poll_pdu                 =  4;
-
-      # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-      poll_byte                =  99999;
-
-      # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-      max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-      # Number of streams to use in input/output
-      SCTP_INSTREAMS  = 2;
-      SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address  = (
-      {
-        ipv4       = "CI_MME_IP_ADDR";
-        ipv6       = "192:168:30::17";
-        port       = 36412 ;
-        active     = "yes";
-        preference = "ipv4";
-      }
-    );
-
-    NETWORK_INTERFACES : {
-      ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1_MME   = "CI_ENB_IP_ADDR";
-      ENB_INTERFACE_NAME_FOR_S1U    = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1U      = "CI_ENB_IP_ADDR";
-      ENB_PORT_FOR_S1U              = 2152; # Spec 2152
-      ENB_IPV4_ADDRESS_FOR_X2C      = "CI_ENB_IP_ADDR";
-      ENB_PORT_FOR_X2C              = 36422; # Spec 36422
-    };
-  }
-);
-
-log_config = {
-  global_log_level            = "info";
-  pdcp_log_level              = "info";
-  rrc_log_level               = "info";
-  gtp_log_level               = "info";
-};

ci-scripts/conf_files/cu.band7.tm1.50PRB.conf

@@ -1,207 +0,0 @@
-Active_eNBs = ( "eNB-CU-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs = (
-  {
-    ////////// Identification parameters:
-    eNB_ID    = 0xe00;
-
-    cell_type = "CELL_MACRO_ENB";
-
-    eNB_name  = "eNB-CU-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
-
-    nr_cellid = 12345678L
-
-    tr_s_preference  = "f1"
-
-    local_s_if_name  = "lo";
-    remote_s_address = "127.0.0.3";
-    local_s_address  = "127.0.0.4";
-    local_s_portc    = 501;
-    remote_s_portc   = 500;
-    local_s_portd    = 601;
-    remote_s_portd   = 600;
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-        node_function                           = "3GPP_eNodeB";
-        node_timing                             = "synch_to_ext_device";
-        node_synch_ref                          = 0;
-        frame_type                              = "FDD";
-        tdd_config                              = 3;
-        tdd_config_s                            = 0;
-        prefix_type                             = "NORMAL";
-        eutra_band                              = 7;
-        downlink_frequency                      = 2680000000L;
-        uplink_frequency_offset                 = -120000000;
-        Nid_cell                                = 0;
-        N_RB_DL                                 = 50;
-        pbch_repetition                         = "FALSE";
-        prach_root                              = 0;
-        prach_config_index                      = 0;
-        prach_high_speed                        = "DISABLE";
-        prach_zero_correlation                  = 1;
-        prach_freq_offset                       = 2;
-        pucch_delta_shift                       = 1;
-        pucch_nRB_CQI                           = 0;
-        pucch_nCS_AN                            = 0;
-        pucch_n1_AN                             = 0;
-        pdsch_referenceSignalPower              = -27;
-        pdsch_p_b                               = 0;
-        pusch_n_SB                              = 1;
-        pusch_enable64QAM                       = "DISABLE";
-        pusch_hoppingMode                       = "interSubFrame";
-        pusch_hoppingOffset                     = 0;
-        pusch_groupHoppingEnable                = "ENABLE";
-        pusch_groupAssignment                   = 0;
-        pusch_sequenceHoppingEnabled            = "DISABLE";
-        pusch_nDMRS1                            = 1;
-        phich_duration                          = "NORMAL";
-        phich_resource                          = "ONESIXTH";
-        srs_enable                              = "DISABLE";
-        /*
-        srs_BandwidthConfig                     =;
-        srs_SubframeConfig                      =;
-        srs_ackNackST                           =;
-        srs_MaxUpPts                            =;
-        */
-
-        pusch_p0_Nominal                        = -96;
-        pusch_alpha                             = "AL1";
-        pucch_p0_Nominal                        = -104;
-        msg3_delta_Preamble                     = 6;
-        pucch_deltaF_Format1                    = "deltaF2";
-        pucch_deltaF_Format1b                   = "deltaF3";
-        pucch_deltaF_Format2                    = "deltaF0";
-        pucch_deltaF_Format2a                   = "deltaF0";
-        pucch_deltaF_Format2b                   = "deltaF0";
-
-        rach_numberOfRA_Preambles               = 64;
-        rach_preamblesGroupAConfig              = "DISABLE";
-        /*
-        rach_sizeOfRA_PreamblesGroupA           = ;
-        rach_messageSizeGroupA                  = ;
-        rach_messagePowerOffsetGroupB           = ;
-        */
-        rach_powerRampingStep                   = 4;
-        rach_preambleInitialReceivedTargetPower = -108;
-        rach_preambleTransMax                   = 10;
-        rach_raResponseWindowSize               = 10;
-        rach_macContentionResolutionTimer       = 48;
-        rach_maxHARQ_Msg3Tx                     = 4;
-
-        pcch_default_PagingCycle                = 128;
-        pcch_nB                                 = "oneT";
-        bcch_modificationPeriodCoeff= 2;
-        ue_TimersAndConstants_t300              = 1000;
-        ue_TimersAndConstants_t301              = 1000;
-        ue_TimersAndConstants_t310              = 1000;
-        ue_TimersAndConstants_t311              = 10000;
-        ue_TimersAndConstants_n310              = 20;
-        ue_TimersAndConstants_n311              = 1;
-        ue_TransmissionMode                     = 1;
-
-        //Parameters for SIB18
-        rxPool_sc_CP_Len                                       = "normal";
-        rxPool_sc_Period                                       = "sf40";
-        rxPool_data_CP_Len                                     = "normal";
-        rxPool_ResourceConfig_prb_Num                          = 20;
-        rxPool_ResourceConfig_prb_Start                        = 5;
-        rxPool_ResourceConfig_prb_End                          = 44;
-        rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-        rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-        rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-        rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-        /*
-        rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-        rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-        rxPool_dataHoppingConfig_rbOffset                               = 0;
-        rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-        */
-
-        // Parameters for SIB19
-        discRxPool_cp_Len                                               = "normal"
-        discRxPool_discPeriod                                           = "rf32"
-        discRxPool_numRetx                                              = 1;
-        discRxPool_numRepetition                                        = 2;
-        discRxPool_ResourceConfig_prb_Num                               = 5;
-        discRxPool_ResourceConfig_prb_Start                             = 3;
-        discRxPool_ResourceConfig_prb_End                               = 21;
-        discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-        discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-        discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-        discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-      }
-    );
-
-
-    srb1_parameters :
-    {
-      # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-      timer_poll_retransmit    = 80;
-
-      # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-      timer_reordering         = 35;
-
-      # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-      timer_status_prohibit    = 0;
-
-      # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-      poll_pdu                 =  4;
-
-      # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-      poll_byte                =  99999;
-
-      # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-      max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-      # Number of streams to use in input/output
-      SCTP_INSTREAMS  = 2;
-      SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address  = (
-      {
-        ipv4       = "CI_MME_IP_ADDR";
-        ipv6       = "192:168:30::17";
-        port       = 36412 ;
-        active     = "yes";
-        preference = "ipv4";
-      }
-    );
-
-    NETWORK_INTERFACES : {
-      ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1_MME   = "CI_ENB_IP_ADDR";
-      ENB_INTERFACE_NAME_FOR_S1U    = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1U      = "CI_ENB_IP_ADDR";
-      ENB_PORT_FOR_S1U              = 2152; # Spec 2152
-      ENB_IPV4_ADDRESS_FOR_X2C      = "CI_ENB_IP_ADDR";
-      ENB_PORT_FOR_X2C              = 36422; # Spec 36422
-    };
-  }
-);
-
-log_config = {
-  global_log_level            = "info";
-  pdcp_log_level              = "info";
-  rrc_log_level               = "info";
-  gtp_log_level               = "info";
-};

ci-scripts/conf_files/du.band7.tm1.100PRB.usrpb210.conf

@@ -1,112 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-DU");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
-  {
-    ////////// Identification parameters:
-    eNB_CU_ID = 0xe00;
-
-    eNB_name  = "eNB-Eurecom-DU";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
-
-    nr_cellid = 12345678L
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-        node_function           = "3GPP_eNODEB";
-        node_timing             = "synch_to_ext_device";
-        node_synch_ref          = 0;
-        frame_type              = "FDD";
-        tdd_config              = 3;
-        tdd_config_s            = 0;
-        prefix_type             = "NORMAL";
-        eutra_band              = 7;
-        downlink_frequency      = 2680000000L;
-        uplink_frequency_offset = -120000000;
-        Nid_cell                = 0;
-        N_RB_DL                 = 100;
-        Nid_cell_mbsfn          = 0;
-        nb_antenna_ports        = 1;
-        nb_antennas_tx          = 1;
-        nb_antennas_rx          = 1;
-        tx_gain                 = 90;
-        rx_gain                 = 115;
-
-        pucch_deltaF_Format1    = "deltaF2";
-        pucch_deltaF_Format1b   = "deltaF3";
-        pucch_deltaF_Format2    = "deltaF0";
-        pucch_deltaF_Format2a   = "deltaF0";
-        pucch_deltaF_Format2b   = "deltaF0";
-      }
-    );
-
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-      # Number of streams to use in input/output
-      SCTP_INSTREAMS  = 2;
-      SCTP_OUTSTREAMS = 2;
-    };
-  }
-);
-
-MACRLCs = (
-  {
-    num_cc           = 1;
-    tr_s_preference  = "local_L1";
-    tr_n_preference  = "f1";
-    local_n_if_name  = "lo";
-    remote_n_address = "127.0.0.4";
-    local_n_address  = "127.0.0.3";
-    local_n_portc    = 500;
-    remote_n_portc   = 501;
-    local_n_portd    = 600;
-    remote_n_portd   = 601;
-  }
-);
-
-L1s = (
-  {
-    num_cc = 1;
-    tr_n_preference = "local_mac";
-  }
-);
-
-RUs = (
-  {
-    local_rf                      = "yes";
-    nb_tx                         = 1;
-    nb_rx                         = 1;
-    att_tx                        = 10;
-    att_rx                        = 10;
-    bands                         = [7];
-    max_pdschReferenceSignalPower = -29;
-    max_rxgain                    = 115;
-    eNB_instances                 = [0];
-  }
-);
-
-log_config = {
-  global_log_level            = "info";
-  hw_log_level                = "info";
-  phy_log_level               = "info";
-  mac_log_level               = "info";
-  rlc_log_level               = "info";
-};
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #        #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);

ci-scripts/conf_files/du.band7.tm1.25PRB.usrpb210.conf

@@ -1,112 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-DU");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
-  {
-    ////////// Identification parameters:
-    eNB_CU_ID = 0xe00;
-
-    eNB_name  = "eNB-Eurecom-DU";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
-
-    nr_cellid = 12345678L
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-        node_function           = "3GPP_eNODEB";
-        node_timing             = "synch_to_ext_device";
-        node_synch_ref          = 0;
-        frame_type              = "FDD";
-        tdd_config              = 3;
-        tdd_config_s            = 0;
-        prefix_type             = "NORMAL";
-        eutra_band              = 7;
-        downlink_frequency      = 2680000000L;
-        uplink_frequency_offset = -120000000;
-        Nid_cell                = 0;
-        N_RB_DL                 = 25;
-        Nid_cell_mbsfn          = 0;
-        nb_antenna_ports        = 1;
-        nb_antennas_tx          = 1;
-        nb_antennas_rx          = 1;
-        tx_gain                 = 90;
-        rx_gain                 = 125;
-
-        pucch_deltaF_Format1    = "deltaF2";
-        pucch_deltaF_Format1b   = "deltaF3";
-        pucch_deltaF_Format2    = "deltaF0";
-        pucch_deltaF_Format2a   = "deltaF0";
-        pucch_deltaF_Format2b   = "deltaF0";
-      }
-    );
-
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-      # Number of streams to use in input/output
-      SCTP_INSTREAMS  = 2;
-      SCTP_OUTSTREAMS = 2;
-    };
-  }
-);
-
-MACRLCs = (
-  {
-    num_cc           = 1;
-    tr_s_preference  = "local_L1";
-    tr_n_preference  = "f1";
-    local_n_if_name  = "lo";
-    remote_n_address = "127.0.0.4";
-    local_n_address  = "127.0.0.3";
-    local_n_portc    = 500;
-    remote_n_portc   = 501;
-    local_n_portd    = 600;
-    remote_n_portd   = 601;
-  }
-);
-
-L1s = (
-  {
-    num_cc = 1;
-    tr_n_preference = "local_mac";
-  }
-);
-
-RUs = (
-  {
-    local_rf                      = "yes";
-    nb_tx                         = 1;
-    nb_rx                         = 1;
-    att_tx                        = 10;
-    att_rx                        = 10;
-    bands                         = [7];
-    max_pdschReferenceSignalPower = -25;
-    max_rxgain                    = 125;
-    eNB_instances                 = [0];
-  }
-);
-
-log_config = {
-  global_log_level            = "info";
-  hw_log_level                = "info";
-  phy_log_level               = "info";
-  mac_log_level               = "info";
-  rlc_log_level               = "info";
-};
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #        #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);

ci-scripts/conf_files/du.band7.tm1.50PRB.usrpb210.conf

@@ -1,112 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-DU");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
-  {
-    ////////// Identification parameters:
-    eNB_CU_ID = 0xe00;
-
-    eNB_name  = "eNB-Eurecom-DU";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
-
-    nr_cellid = 12345678L
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-        node_function           = "3GPP_eNODEB";
-        node_timing             = "synch_to_ext_device";
-        node_synch_ref          = 0;
-        frame_type              = "FDD";
-        tdd_config              = 3;
-        tdd_config_s            = 0;
-        prefix_type             = "NORMAL";
-        eutra_band              = 7;
-        downlink_frequency      = 2680000000L;
-        uplink_frequency_offset = -120000000;
-        Nid_cell                = 0;
-        N_RB_DL                 = 50;
-        Nid_cell_mbsfn          = 0;
-        nb_antenna_ports        = 1;
-        nb_antennas_tx          = 1;
-        nb_antennas_rx          = 1;
-        tx_gain                 = 90;
-        rx_gain                 = 120;
-
-        pucch_deltaF_Format1    = "deltaF2";
-        pucch_deltaF_Format1b   = "deltaF3";
-        pucch_deltaF_Format2    = "deltaF0";
-        pucch_deltaF_Format2a   = "deltaF0";
-        pucch_deltaF_Format2b   = "deltaF0";
-      }
-    );
-
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-      # Number of streams to use in input/output
-      SCTP_INSTREAMS  = 2;
-      SCTP_OUTSTREAMS = 2;
-    };
-  }
-);
-
-MACRLCs = (
-  {
-    num_cc           = 1;
-    tr_s_preference  = "local_L1";
-    tr_n_preference  = "f1";
-    local_n_if_name  = "lo";
-    remote_n_address = "127.0.0.4";
-    local_n_address  = "127.0.0.3";
-    local_n_portc    = 500;
-    remote_n_portc   = 501;
-    local_n_portd    = 600;
-    remote_n_portd   = 601;
-  }
-);
-
-L1s = (
-  {
-    num_cc = 1;
-    tr_n_preference = "local_mac";
-  }
-);
-
-RUs = (
-  {
-    local_rf                      = "yes";
-    nb_tx                         = 1;
-    nb_rx                         = 1;
-    att_tx                        = 10;
-    att_rx                        = 10;
-    bands                         = [7];
-    max_pdschReferenceSignalPower = -27;
-    max_rxgain                    = 120;
-    eNB_instances                 = [0];
-  }
-);
-
-log_config = {
-  global_log_level            = "info";
-  hw_log_level                = "info";
-  phy_log_level               = "info";
-  mac_log_level               = "info";
-  rlc_log_level               = "info";
-};
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #        #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);

ci-scripts/conf_files/enb-rcc.band40.25prb.tm1.if4p5.fair-scheduler.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "rcc-in-docker");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -13,7 +13,7 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "rcc-in-docker";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code = 1;
@@ -137,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
                               ipv6       = "192:168:30::17";
                               port       = 36412 ;
                               active     = "yes";
@@ -157,17 +157,17 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.45";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.45";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.45";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
     log_config :
     {
-      global_log_level                      ="debug";
+      global_log_level                      ="info";
       hw_log_level                          ="info";
       phy_log_level                         ="info";
       mac_log_level                         ="info";
@@ -200,7 +200,7 @@ RUs = (
   {
     local_if_name  = "lo";
     remote_address = "127.0.0.2";
-    local_address  = "127.0.0.1";
+    local_address  = "127.0.0.3";
     local_portc    = 50000;
     remote_portc   = 50000;
     local_portd    = 50001;

ci-scripts/conf_files/enb-rcc.band7.25prb.tm1.if4p5.conf

@@ -1,4 +1,4 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
+Active_eNBs = ( "rcc-in-docker");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -13,7 +13,7 @@ eNBs =
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB-Eurecom-LTEBox";
+    eNB_name  =  "rcc-in-docker";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code = 1;
@@ -174,7 +174,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
                               ipv6       = "192:168:30::17";
                               port       = 36412 ;
                               active     = "yes";
@@ -194,11 +194,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.46";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.46";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.46";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -226,7 +226,7 @@ RUs = (
     {
         local_if_name  = "lo";
         remote_address = "127.0.0.2";
-        local_address  = "127.0.0.1";
+        local_address  = "127.0.0.3";
         local_portc    = 50000;
         remote_portc   = 50000;
         local_portd    = 50001;

ci-scripts/conf_files/enb-rru.band40.usrpb210.tm1.conf

@@ -2,7 +2,7 @@ RUs =
 (
   {
     local_if_name                 = "lo";
-    remote_address                = "127.0.0.1"
+    remote_address                = "127.0.0.3"
     local_address                 = "127.0.0.2";
     local_portc                   = 50000;
     remote_portc                  = 50000;
@@ -13,7 +13,7 @@ RUs =
     nb_tx                         = 1;
     nb_rx                         = 1;
     max_pdschReferenceSignalPower = -27;
-    max_rxgain                    = 115;
+    max_rxgain                    = 125;
     bands                         = [40];
   }
 );

ci-scripts/conf_files/enb-rru.band7.usrpb210.tm1.conf

@@ -2,7 +2,7 @@ RUs =
 (
   {
     local_if_name                 = "lo";
-    remote_address                = "127.0.0.1"
+    remote_address                = "127.0.0.3"
     local_address                 = "127.0.0.2";
     local_portc                   = 50000;
     remote_portc                  = 50000;
@@ -13,7 +13,7 @@ RUs =
     nb_tx                         = 1;
     nb_rx                         = 1;
     max_pdschReferenceSignalPower = -27;
-    max_rxgain                    = 115;
+    max_rxgain                    = 125;
     bands                         = [7];
   }
 );

ci-scripts/conf_files/enb.band38.25prb.rfsim.conf

@@ -0,0 +1,222 @@
+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 96; mnc_length = 2; } );
+
+       ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                                         = "eNodeB_3GPP";
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
+        frame_type					      = "TDD";
+        tdd_config 					      = 1;
+        tdd_config_s            			      = 0;
+        prefix_type             			      = "NORMAL";
+        eutra_band              			      = 38;
+        downlink_frequency      			      = 2605000000L;
+        uplink_frequency_offset 			      = 0000000;
+        Nid_cell					      = 10;
+        N_RB_DL                 			      = 25;
+        Nid_cell_mbsfn          			      = 0;
+        nb_antenna_ports          			      = 1;
+        nb_antennas_tx          			      = 1;
+        nb_antennas_rx          			      = 1;
+        tx_gain                                            = 90;
+        rx_gain                                            = 125;
+        prach_root              			      = 0;
+        prach_config_index      			      = 0;
+        prach_high_speed        			      = "DISABLE";
+        prach_zero_correlation  			      = 1;
+        prach_freq_offset       			      = 2;
+        pucch_delta_shift       			      = 1;
+        pucch_nRB_CQI           			      = 1;
+        pucch_nCS_AN            			      = 0;
+        pucch_n1_AN             			      = 0;
+        pdsch_referenceSignalPower 			      =-27;
+        pdsch_p_b                  			      = 0;
+        pusch_n_SB                 			      = 1;
+        pusch_enable64QAM          			      = "DISABLE";
+        pusch_hoppingMode                                  = "interSubFrame";
+        pusch_hoppingOffset                                = 0;
+        pusch_groupHoppingEnabled  			      = "ENABLE";
+        pusch_groupAssignment      			      = 0;
+        pusch_sequenceHoppingEnabled		   	      = "DISABLE";
+        pusch_nDMRS1                                       = 1;
+        phich_duration                                     = "NORMAL";
+        phich_resource                                     = "ONESIXTH";
+        srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+        srs_SubframeConfig                                 =;
+        srs_ackNackST                                      =;
+        srs_MaxUpPts                                       =;*/
+
+        pusch_p0_Nominal                                   = -96;
+        pusch_alpha                                        = "AL1";
+        pucch_p0_Nominal                                   = -106;
+        msg3_delta_Preamble                                = 6;
+        pucch_deltaF_Format1                               = "deltaF2";
+        pucch_deltaF_Format1b                              = "deltaF3";
+        pucch_deltaF_Format2                               = "deltaF0";
+        pucch_deltaF_Format2a                              = "deltaF0";
+        pucch_deltaF_Format2b		    	      = "deltaF0";
+
+        rach_numberOfRA_Preambles                          = 64;
+        rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+        rach_sizeOfRA_PreamblesGroupA                      = ;
+        rach_messageSizeGroupA                             = ;
+        rach_messagePowerOffsetGroupB                      = ;
+      */
+        rach_powerRampingStep                              = 4;
+        rach_preambleInitialReceivedTargetPower            = -108;
+        rach_preambleTransMax                              = 10;
+        rach_raResponseWindowSize                          = 10;
+        rach_macContentionResolutionTimer                  = 48;
+        rach_maxHARQ_Msg3Tx                                = 4;
+
+        pcch_default_PagingCycle                           = 128;
+        pcch_nB                                            = "oneT";
+        bcch_modificationPeriodCoeff			      = 2;
+        ue_TimersAndConstants_t300			      = 1000;
+        ue_TimersAndConstants_t301			      = 1000;
+        ue_TimersAndConstants_t310			      = 1000;
+        ue_TimersAndConstants_t311			      = 10000;
+        ue_TimersAndConstants_n310			      = 20;
+        ue_TimersAndConstants_n311			      = 1;
+
+	ue_TransmissionMode				      = 1;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.61.3";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    enable_measurement_reports = "no";
+
+    ///X2
+    enable_x2 = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES :
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.61.20";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.61.20";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.61.20";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+
+    log_config :
+    {
+      global_log_level                      ="debug";
+      hw_log_level                          ="info";
+      phy_log_level                         ="info";
+      mac_log_level                         ="info";
+      rlc_log_level                         ="info";
+      pdcp_log_level                        ="info";
+      rrc_log_level                         ="info";
+   };
+
+  }
+);
+MACRLCs = (
+	{
+        num_cc = 1;
+        tr_s_preference = "local_L1";
+        tr_n_preference = "local_RRC";
+        scheduler_mode = "fairRR";
+        puSch10xSnr     =  150;
+        puCch10xSnr     =  150;
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 6
+         att_rx         = 6;
+         bands          = [38];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 125;
+         eNB_instances  = [0];
+
+    }
+);  
+
+rfsimulator: {
+    serveraddr = "server";
+};
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);

ci-scripts/conf_files/enb.band40.100prb.usrpb200.tm1-defaultscheduler.conf

@@ -1,19 +1,16 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-in-docker");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
 eNBs =
 (
  {
-    # real_time choice in {hard, rt-preempt, no}
-    real_time       =  "no";
-
     ////////// Identification parameters:
     eNB_ID    =  0xe00;
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-in-docker";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code = 1;
@@ -23,7 +20,7 @@ eNBs =
 
     component_carriers = (
       {
-        node_function                                         = "NGFI_RCC_IF4p5";
+        node_function                                         = "eNodeB_3GPP";
         node_timing                                           = "synch_to_ext_device";
         node_synch_ref                                        = 0;
         frame_type					      = "TDD";
@@ -32,7 +29,7 @@ eNBs =
         prefix_type             			      = "NORMAL";
         eutra_band              			      = 40;
         downlink_frequency      			      = 2350000000L;
-        uplink_frequency_offset 			      = 0;
+        uplink_frequency_offset 			      = 0000000;
         Nid_cell					      = 0;
         N_RB_DL                 			      = 100;
         Nid_cell_mbsfn          			      = 0;
@@ -50,7 +47,7 @@ eNBs =
         pucch_nRB_CQI           			      = 1;
         pucch_nCS_AN            			      = 0;
         pucch_n1_AN             			      = 0;
-        pdsch_referenceSignalPower 			      =-29;
+        pdsch_referenceSignalPower 			      =-27;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
         pusch_enable64QAM          			      = "DISABLE";
@@ -137,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
                               ipv6       = "192:168:30::17";
                               port       = 36412 ;
                               active     = "yes";
@@ -157,11 +154,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.45";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.45";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.45";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
@@ -184,8 +181,8 @@ MACRLCs = (
         tr_s_preference = "local_L1";
         tr_n_preference = "local_RRC";
         scheduler_mode = "fairRR";
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  150;
+        puCch10xSnr     =  150;
         }  
 );
 
@@ -198,20 +195,16 @@ L1s = (
 
 RUs = (
     {		  
-        local_if_name  = "lo";
-        remote_address = "127.0.0.2";
-        local_address  = "127.0.0.1";
-        local_portc    = 50000;
-        remote_portc   = 50000;
-        local_portd    = 50001;
-        remote_portd   = 50001;
-        local_rf       = "no"
-        tr_preference  = "udp_if4p5"
-        nb_tx          = 1
-        nb_rx          = 1
-        att_tx         = 0
-        att_rx         = 0;
-        eNB_instances  = [0];
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 6
+         att_rx         = 6;
+         bands          = [38];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 125;
+         eNB_instances  = [0];
+
     }
 );  
 

ci-scripts/conf_files/enb.band40.25prb.usrpb200.conf

@@ -1,19 +1,16 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
+Active_eNBs = ( "eNB-Eurecom_LTEBox");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
 eNBs =
 (
  {
-    # real_time choice in {hard, rt-preempt, no}
-    real_time       =  "no";
-
     ////////// Identification parameters:
     eNB_ID    =  0xe00;
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB_Eurecom_LTEBox";
+    eNB_name  =  "eNB-Eurecom_LTEBox";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code = 1;
@@ -23,7 +20,7 @@ eNBs =
 
     component_carriers = (
       {
-        node_function                                         = "NGFI_RCC_IF4p5";
+        node_function                                         = "eNodeB_3GPP";
         node_timing                                           = "synch_to_ext_device";
         node_synch_ref                                        = 0;
         frame_type					      = "TDD";
@@ -34,7 +31,7 @@ eNBs =
         downlink_frequency      			      = 2350000000L;
         uplink_frequency_offset 			      = 0;
         Nid_cell					      = 0;
-        N_RB_DL                 			      = 50;
+        N_RB_DL                 			      = 25;
         Nid_cell_mbsfn          			      = 0;
         nb_antenna_ports          			      = 1;
         nb_antennas_tx          			      = 1;
@@ -137,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
                               ipv6       = "192:168:30::17";
                               port       = 36412 ;
                               active     = "yes";
@@ -157,11 +154,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.45";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.45";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.45";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
@@ -184,8 +181,8 @@ MACRLCs = (
         tr_s_preference = "local_L1";
         tr_n_preference = "local_RRC";
         scheduler_mode = "fairRR";
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  150;
+        puCch10xSnr     =  150;
         }  
 );
 
@@ -198,20 +195,16 @@ L1s = (
 
 RUs = (
     {		  
-        local_if_name  = "lo";
-        remote_address = "127.0.0.2";
-        local_address  = "127.0.0.1";
-        local_portc    = 50000;
-        remote_portc   = 50000;
-        local_portd    = 50001;
-        remote_portd   = 50001;
-        local_rf       = "no"
-        tr_preference  = "udp_if4p5"
-        nb_tx          = 1
-        nb_rx          = 1
-        att_tx         = 6
-        att_rx         = 6;
-        eNB_instances  = [0];
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 6
+         att_rx         = 6;
+         bands          = [38];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 125;
+         eNB_instances  = [0];
+
     }
 );  
 

ci-scripts/conf_files/enb.band7.100prb.rfsim.conf

@@ -0,0 +1,267 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 96; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 10;
+      N_RB_DL                   = 100;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.61.3";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.61.20";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.61.20";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.61.20";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+rfsimulator: {
+    serveraddr = "server";
+};
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.100prb.usrpb200.tm1.conf

@@ -0,0 +1,263 @@
+Active_eNBs = ( "eNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-in-docker";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 0;
+      N_RB_DL                   = 100;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.46";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.46";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.46";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.25prb.l2sim.conf

@@ -1,23 +1,21 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
+Active_eNBs = ( "enb-l2sim-vnf");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
 eNBs =
 (
  {
-    # real_time choice in {hard, rt-preempt, no}
-    real_time       =  "no";
-
     ////////// Identification parameters:
     eNB_ID    =  0xe00;
 
     cell_type =  "CELL_MACRO_ENB";
 
-    eNB_name  =  "eNB-Eurecom-LTEBox";
+    eNB_name  =  "enb-l2sim-vnf";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+
+    plmn_list = ( { mcc = 208; mnc = 96; mnc_length = 2; } );
 
     tr_s_preference     = "local_mac"
 
@@ -25,7 +23,7 @@ eNBs =
 
     component_carriers = (
       {
-      node_function             = "NGFI_RCC_IF4p5";
+      node_function             = "3GPP_eNODEB";
       node_timing               = "synch_to_ext_device";
       node_synch_ref            = 0;
       frame_type					      = "FDD";
@@ -35,8 +33,8 @@ eNBs =
       eutra_band              			      = 7;
       downlink_frequency      			      = 2680000000L;
       uplink_frequency_offset 			      = -120000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 50;
+      Nid_cell					      = 10;
+      N_RB_DL                 			      = 25;
       Nid_cell_mbsfn          			      = 0;
       nb_antenna_ports                                = 1;
       nb_antennas_tx          			      = 1;
@@ -174,7 +172,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+    mme_ip_address      = ( { ipv4       = "192.168.61.3";
                               ipv6       = "192:168:30::17";
                               port       = 36412 ;
                               active     = "yes";
@@ -185,7 +183,7 @@ eNBs =
     enable_measurement_reports = "no";
 
     ///X2
-    enable_x2 = "no";
+    enable_x2 = "yes";
     t_reloc_prep      = 1000;      /* unit: millisecond */
     tx2_reloc_overall = 2000;      /* unit: millisecond */
     t_dc_prep         = 1000;      /* unit: millisecond */
@@ -194,12 +192,13 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.61.1";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.61.1";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.61.1";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+        
     };
   }
 );
@@ -207,56 +206,35 @@ eNBs =
 MACRLCs = (
 	{
 	num_cc = 1;
-	tr_s_preference = "local_L1";
+	local_s_if_name  = "lo";
+	remote_s_address = "127.0.0.1";
+	local_s_address  = "127.0.0.1";
+	local_s_portc    = 50001;
+	remote_s_portc   = 50000;
+	local_s_portd    = 50011;
+	remote_s_portd   = 50010;
+	tr_s_preference = "nfapi";
 	tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
-        }
-);
-
-L1s = (
-      {
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-      }
-);
-
-RUs = (
-    {
-        local_if_name  = "lo";
-        remote_address = "127.0.0.2";
-        local_address  = "127.0.0.1";
-        local_portc    = 50000;
-        remote_portc   = 50000;
-        local_portd    = 50001;
-        remote_portd   = 50001;
-        local_rf       = "no"
-        tr_preference  = "udp_if4p5"
-        nb_tx          = 1
-        nb_rx          = 1
-        att_tx         = 0
-        att_rx         = 0;
-        eNB_instances  = [0];
-    }
+	scheduler_mode = "fairRR";
+        }  
 );
 
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    parallel_config    = "PARALLEL_RU_L1_SPLIT";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }
 );
 
-     log_config :
-     {
-       global_log_level                      ="info";
-       hw_log_level                          ="info";
-       phy_log_level                         ="info";
-       mac_log_level                         ="info";
-       rlc_log_level                         ="info";
-       pdcp_log_level                        ="info";
-       rrc_log_level                         ="info";
-    };
+log_config =
+    {
+      global_log_level                      ="info";
+      hw_log_level                          ="info";
+      phy_log_level                         ="info";
+      mac_log_level                         ="info";
+      rlc_log_level                         ="info";
+      pdcp_log_level                        ="info";
+      rrc_log_level                         ="info";
+   };

ci-scripts/conf_files/enb.band7.25prb.rfsim.conf

@@ -0,0 +1,267 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 96; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 10;
+      N_RB_DL                   = 25;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.61.3";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.61.20";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.61.20";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.61.20";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+rfsimulator: {
+    serveraddr = "server";
+};
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.25prb.rfsim.nos1.conf

@@ -0,0 +1,267 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 96; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 10;
+      N_RB_DL                   = 25;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.61.3";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.61.20";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.61.20";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.61.20";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+rfsimulator: {
+    serveraddr = "server";
+};
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.25prb.usrpb200.conf

@@ -0,0 +1,263 @@
+Active_eNBs = ( "eNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-in-docker";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 222; mnc = 01; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 10;
+      N_RB_DL                   = 25;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.61.30";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.61.30";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.61.30";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.25prb.usrpb200.tm1-norrc.conf

@@ -0,0 +1,263 @@
+Active_eNBs = ( "eNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-in-docker";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 30;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 0;
+      N_RB_DL                   = 25;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.46";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.46";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.46";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.25prb.usrpb200.tm1.conf

@@ -0,0 +1,263 @@
+Active_eNBs = ( "eNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-in-docker";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 0;
+      N_RB_DL                   = 25;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.46";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.46";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.46";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.50prb.rfsim.conf

@@ -0,0 +1,267 @@
+Active_eNBs = ( "eNB-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-Eurecom-LTEBox";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 96; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 10;
+      N_RB_DL                   = 50;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.61.3";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.61.20";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.61.20";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.61.20";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+rfsimulator: {
+    serveraddr = "server";
+};
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.50prb.usrpb200.tm1.conf

@@ -0,0 +1,263 @@
+Active_eNBs = ( "eNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-in-docker";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 0;
+      N_RB_DL                   = 50;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "no";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "172.21.18.48";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "172.21.18.46";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "172.21.18.46";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "172.21.18.46";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/enb.band7.tm1.25prb.rfsim.mbms.conf

@@ -374,6 +374,10 @@ RUs = (
     }
 );
 
+rfsimulator: {
+    serveraddr = "server";
+};
+
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"

ci-scripts/conf_files/enb.nsa.band7.25prb.usrpb200.conf

@@ -0,0 +1,263 @@
+Active_eNBs = ( "eNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe01;
+    cell_type =  "CELL_MACRO_ENB";
+    eNB_name  =  "eNB-in-docker";
+    
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 222; mnc = 01; mnc_length = 2; } );
+    
+    tr_s_preference     = "local_mac"
+
+    // In seconds
+    rrc_inactivity_threshold = 0;
+
+    ////////// Physical parameters:
+  
+    component_carriers = (
+      {
+      node_function             = "3GPP_eNODEB";
+      node_timing               = "synch_to_ext_device";
+      node_synch_ref            = 0;
+      frame_type                = "FDD";
+      tdd_config                = 3;
+      tdd_config_s              = 0;
+      prefix_type               = "NORMAL";
+      eutra_band                = 7;
+      downlink_frequency        = 2680000000L;
+      uplink_frequency_offset   = -120000000;
+      Nid_cell                  = 0;
+      N_RB_DL                   = 25;
+      Nid_cell_mbsfn            = 0;
+      nb_antenna_ports          = 1;
+      nb_antennas_tx            = 1;
+      nb_antennas_rx            = 1;
+      tx_gain                   = 90;
+      rx_gain                   = 115;
+      pbch_repetition           = "FALSE";
+      prach_root                = 0;
+      prach_config_index        = 0;
+      prach_high_speed          = "DISABLE";
+      prach_zero_correlation    = 1;
+      prach_freq_offset         = 2;
+      pucch_delta_shift         = 1;
+      pucch_nRB_CQI             = 0;
+      pucch_nCS_AN              = 0;
+      pucch_n1_AN               = 0;
+      pdsch_referenceSignalPower= -29;
+      pdsch_p_b                 = 0;
+      pusch_n_SB                = 1;
+      pusch_enable64QAM         = "DISABLE";
+      pusch_hoppingMode         = "interSubFrame";
+      pusch_hoppingOffset       = 0;
+      pusch_groupHoppingEnabled = "ENABLE";
+      pusch_groupAssignment     = 0;
+      pusch_sequenceHoppingEnabled = "DISABLE";
+      pusch_nDMRS1              = 1;
+      phich_duration            = "NORMAL";
+      phich_resource            = "ONESIXTH";
+      srs_enable                = "DISABLE";
+/*
+      srs_BandwidthConfig       =;
+      srs_SubframeConfig        =;
+      srs_ackNackST             =;
+      srs_MaxUpPts              =;
+*/
+
+      pusch_p0_Nominal          = -96;
+      pusch_alpha               = "AL1";
+      pucch_p0_Nominal          = -96;
+      msg3_delta_Preamble       = 6;
+      pucch_deltaF_Format1      = "deltaF2";
+      pucch_deltaF_Format1b     = "deltaF3";
+      pucch_deltaF_Format2      = "deltaF0";
+      pucch_deltaF_Format2a     = "deltaF0";
+      pucch_deltaF_Format2b     = "deltaF0";
+ 
+      rach_numberOfRA_Preambles                = 64;
+      rach_preamblesGroupAConfig               = "DISABLE";
+/*
+      rach_sizeOfRA_PreamblesGroupA            = ;
+      rach_messageSizeGroupA                   = ;
+      rach_messagePowerOffsetGroupB            = ;
+*/
+      rach_powerRampingStep                    = 4;
+      rach_preambleInitialReceivedTargetPower  = -108;
+      rach_preambleTransMax                    = 10;
+      rach_raResponseWindowSize                = 10;
+      rach_macContentionResolutionTimer        = 48;
+      rach_maxHARQ_Msg3Tx                      = 4;
+
+      pcch_default_PagingCycle                 = 128;
+      pcch_nB                                  = "oneT";
+      bcch_modificationPeriodCoeff             = 2;
+      ue_TimersAndConstants_t300               = 1000;
+      ue_TimersAndConstants_t301               = 1000;
+      ue_TimersAndConstants_t310               = 1000;
+      ue_TimersAndConstants_t311               = 10000;
+      ue_TimersAndConstants_n310               = 20;
+      ue_TimersAndConstants_n311               = 1;
+      ue_TransmissionMode                      = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal"; 
+      rxPool_sc_Period                                       = "sf40";  
+      rxPool_data_CP_Len                                     = "normal";  
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;      
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf     = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size    = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
+/*
+      rxPool_dataHoppingConfig_hoppingParameter              = 0;
+      rxPool_dataHoppingConfig_numSubbands                   = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                      = 0;
+      rxPool_commTxResourceUC-ReqAllowed                     = "TRUE";
+*/    
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+
+      //SSB central frequency of NR secondary cell group (for ENDC NSA)
+      nr_scg_ssb_freq = 641272;
+    }
+  );
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    enable_measurement_reports = "yes";
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "172.21.16.137";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2         = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES : 
+    {
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.68.130";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.68.130";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.68.130";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs =
+(
+  {
+    num_cc          = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+    phy_test_mode   = 0;
+    puSch10xSnr     =  160;
+    puCch10xSnr     =  160;
+  }
+);
+
+L1s =
+(
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs =
+(
+  {
+    local_rf                      = "yes"
+    nb_tx                         = 1
+    nb_rx                         = 1
+    att_tx                        = 3
+    att_rx                        = 0;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+#    clock_src                     = "external";
+  }
+);
+
+THREAD_STRUCT =
+(
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config : 
+  {
+     global_log_level                      ="info"; 
+     hw_log_level                          ="info"; 
+     phy_log_level                         ="info"; 
+     mac_log_level                         ="info"; 
+     rlc_log_level                         ="info"; 
+     pdcp_log_level                        ="info"; 
+     rrc_log_level                         ="info"; 
+};

ci-scripts/conf_files/gnb-cu.sa.band78.106prb.conf

@@ -0,0 +1,219 @@
+Active_gNBs = ( "cu-rfsim");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+Num_Threads_PUSCH = 8;
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID = 0xe00;
+
+#     cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "cu-rfsim";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+
+    nr_cellid = 12345678L;
+    force_256qam_off = 1;
+
+    tr_s_preference = "f1";
+
+    local_s_if_name = "eth0";
+    local_s_address = "192.168.71.140";
+    remote_s_address = "192.168.71.142";
+    local_s_portc   = 501;
+    local_s_portd   = 2153;
+    remote_s_portc  = 500;
+    remote_s_portd  = 2153;
+    min_rxtxtime                                              = 6;
+
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                             = 641280;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640008;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 11;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+        amf_ip_address      = ( { ipv4       = "192.168.71.132";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.71.140";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.71.140";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="debug";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+       f1ap_log_level                         ="debug";
+       ngap_log_level                         ="debug";
+    };

ci-scripts/conf_files/gnb-cu.sa.band78.106prb.usrpb200.conf

@@ -15,7 +15,7 @@ gNBs =
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code  =  1;
-    plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+    plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
 
 
     nr_cellid = 12345678L;
@@ -23,13 +23,13 @@ gNBs =
 
     tr_s_preference = "f1";
 
-    local_s_if_name = "lo";
-    local_s_address = "127.0.0.4";
-    remote_s_address = "127.0.0.3";
+    local_s_if_name = "eth0";
+    local_s_address = "192.168.68.194";
+    remote_s_address = "192.168.68.195";
     local_s_portc   = 501;
-    local_s_portd   = 2152;
+    local_s_portd   = 2153;
     remote_s_portc  = 500;
-    remote_s_portd  = 2152;
+    remote_s_portd  = 2153;
     min_rxtxtime                                              = 6;
 
     servingCellConfigCommon = (
@@ -169,7 +169,7 @@ gNBs =
 
 
     ////////// AMF parameters:
-    amf_ip_address      = ( { ipv4       = "192.168.70.132";
+        amf_ip_address      = ( { ipv4       = "172.21.16.137";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -178,10 +178,11 @@ gNBs =
 
     NETWORK_INTERFACES :
     {
-        GNB_INTERFACE_NAME_FOR_NG_AMF            = "demo-oai";
-        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.70.129/24";
-        GNB_INTERFACE_NAME_FOR_NGU               = "demo-oai";
-        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.70.129/24";
+
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.68.194";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.68.194";
         GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
     };
   }
@@ -212,7 +213,6 @@ security = {
        rlc_log_level                         ="debug";
        pdcp_log_level                        ="info";
        rrc_log_level                         ="info";
-       f1ap_log_level                         ="info";
+       f1ap_log_level                         ="debug";
        ngap_log_level                         ="debug";
     };
-

ci-scripts/conf_files/gnb-du.sa.band78.106prb.rfsim.conf

@@ -1,4 +1,4 @@
-Active_gNBs = ( "gNB-Eurecom-DU");
+Active_gNBs = ( "du-rfsim");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,7 +10,7 @@ gNBs =
 
 #     cell_type =  "CELL_MACRO_GNB";
 
-    gNB_name  =  "gNB-Eurecom-DU";
+    gNB_name  =  "du-rfsim";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code  =  1;
@@ -168,16 +168,15 @@ MACRLCs = (
     num_cc           = 1;
     tr_s_preference  = "local_L1";
     tr_n_preference  = "f1";
-    local_n_if_name = "lo";
-    local_n_address = "127.0.0.3";
-    remote_n_address = "127.0.0.4";
+    local_n_if_name = "eth0";
+    local_n_address = "192.168.71.142";
+    remote_n_address = "192.168.71.140";
     local_n_portc   = 500;
-    local_n_portd   = 2152;
+    local_n_portd   = 2153;
     remote_n_portc  = 501;
-    remote_n_portd  = 2152;
+    remote_n_portd  = 2153;
     pusch_TargetSNRx10          = 200;
     pucch_TargetSNRx10          = 200;
-    ulsch_max_frame_inactivity = 1;
   }
 );
 
@@ -233,7 +232,6 @@ serveraddr = "server";
        rlc_log_level                         ="info";
        pdcp_log_level                        ="info";
        rrc_log_level                         ="info";
-       f1ap_log_level                         ="info";
+       f1ap_log_level                         ="debug";
        ngap_log_level                         ="debug";
     };
-

ci-scripts/conf_files/gnb-du.sa.band78.106prb.usrpb200.conf

@@ -0,0 +1,232 @@
+Active_gNBs = ( "gNB-Eurecom-DU");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID = 0xe00;
+
+#     cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-DU";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    min_rxtxtime                                              = 6;
+    force_256qam_off = 1;
+
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 641280;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640008;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 12;
+        initialDLBWPsearchSpaceZero                                             = 0;
+
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+     }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc           = 1;
+    tr_s_preference  = "local_L1";
+    tr_n_preference  = "f1";
+    local_n_if_name = "eth0";
+    local_n_address = "192.168.68.195";
+    remote_n_address = "192.168.68.194";
+    local_n_portc   = 500;
+    local_n_portd   = 2153;
+    remote_n_portc  = 501;
+    remote_n_portd  = 2153;
+    pusch_TargetSNRx10          = 200;
+    pucch_TargetSNRx10          = 200;
+    ulsch_max_frame_inactivity = 1;
+  }
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+  prach_dtx_threshold = 200;
+  pucch0_dtx_threshold = 150;
+  ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [78];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 114;
+         eNB_instances  = [0];
+         #beamforming 1x4 matrix:
+         bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
+         clock_src = "internal";
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="info";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+       f1ap_log_level                         ="debug";
+       ngap_log_level                         ="debug";
+    };

ci-scripts/conf_files/gnb.band261.32prb.rfsim.phytest-dora.conf

@@ -15,7 +15,7 @@ gNBs =
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code  =  1;
 
-    plmn_list = ({mcc = 311; mnc = 480; mnc_length = 3;});	 
+    plmn_list = ({mcc = 208; mnc = 99; mnc_length = 2;});
 
     tr_s_preference     = "local_mac"
 
@@ -234,6 +234,10 @@ RUs = (
     }
 );  
 
+rfsimulator: {
+    serveraddr = "server";
+};
+
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"

ci-scripts/conf_files/gnb.band66.106prb.rfsim.phytest-dora.conf

@@ -212,6 +212,10 @@ RUs = (
     }
 );
 
+rfsimulator: {
+    serveraddr = "server";
+};
+
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"

ci-scripts/conf_files/gnb.band78.106prb.rfsim.phytest-dora.conf

@@ -0,0 +1,264 @@
+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 208; mnc = 99; mnc_length = 2;});
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    min_rxtxtime = 6;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 641032;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=41,L=24 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 12;
+        initialDLBWPsearchSpaceZero                                             = 0;
+
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              port       = 36412 ;
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+	}
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+}
+);
+
+RUs = (
+    {		  
+         local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 50;
+         eNB_instances  = [0];
+         ## beamforming 1x2 matrix: 1 layer x 2 antennas
+         bf_weights = [0x00007fff, 0x0000];
+         ## beamforming 1x4 matrix: 1 layer x 4 antennas
+         #bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
+         ## beamforming 2x2 matrix:
+         #bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
+         ## beamforming 4x4 matrix:
+         #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
+
+         sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
+    }
+);  
+
+rfsimulator: {
+    serveraddr = "server";
+};
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="info";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+    };
+

ci-scripts/conf_files/gnb.band78.106prb.usrpn300.phytest-dora.conf

@@ -15,7 +15,7 @@ gNBs =
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code  =  1;
 
-    plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});	 
+    plmn_list = ({mcc = 208; mnc = 99; mnc_length = 2;});
 
     tr_s_preference     = "local_mac"
 

ci-scripts/conf_files/gnb.nsa.band78.106prb.usrpb200.conf

@@ -0,0 +1,269 @@
+Active_gNBs = ( "gNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    cell_type =  "CELL_MACRO_GNB";
+    gNB_name  =  "gNB-in-docker";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;});   
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+ 
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 641272;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=84,L=13 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -100;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 5;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14; //15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 1,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1; #0x80;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7; //8; //7;
+      nrofDownlinkSymbols                                           = 6; //0; //6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4; //0; //4;
+
+  ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+#    mme_ip_address      = ( { ipv4       = "192.168.68.130";
+#                              ipv6       = "192:168:30::17";
+#                              port       = 36412 ;
+#                              active     = "yes";
+#                              preference = "ipv4";
+#                            }
+#                          );
+
+    ///X2
+    enable_x2         = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    target_enb_x2_ip_address = ( { ipv4       = "192.168.68.130";
+                                   ipv6       = "192:168:30::17";
+                                   preference = "ipv4";
+                                 }
+                               );
+
+    NETWORK_INTERFACES :
+    {
+      GNB_INTERFACE_NAME_FOR_S1_MME  = "eth0";
+      GNB_IPV4_ADDRESS_FOR_S1_MME    = "192.168.68.194";
+      GNB_INTERFACE_NAME_FOR_S1U     = "eth0";
+      GNB_IPV4_ADDRESS_FOR_S1U       = "192.168.68.194";
+      GNB_PORT_FOR_S1U               = 2152; # Spec 2152
+      GNB_IPV4_ADDRESS_FOR_X2C       = "192.168.68.194";
+      GNB_PORT_FOR_X2C               = 36422; # Spec 36422
+    };
+
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc              = 1;
+    tr_s_preference     = "local_L1";
+    tr_n_preference     = "local_RRC";
+    pusch_TargetSNRx10  = 200;
+    pucch_TargetSNRx10  = 200;
+    ulsch_max_frame_inactivity = 0;
+  }
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+  ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+  {
+    local_rf       = "yes"
+    nb_tx          = 1
+    nb_rx          = 1
+    att_tx         = 12
+    att_rx         = 12;
+    bands          = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain     = 114;
+    eNB_instances  = [0];
+#    sdr_addrs = "serial=30C51D4";
+#    clock_src      = "external";
+  }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level      ="info";
+  hw_log_level          ="info";
+  phy_log_level         ="info";
+  mac_log_level         ="info";
+  rlc_log_level         ="info";
+  pdcp_log_level        ="info";
+  rrc_log_level         ="info";
+};
+
+uicc: {
+  opc = "testopc";
+};

ci-scripts/conf_files/gnb.sa.band66.106prb.rfsim.conf

@@ -0,0 +1,266 @@
+Active_gNBs = ( "gnb-rfsim");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gnb-rfsim";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    min_rxtxtime                                              = 6;
+    enable_sdap = 1;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                             = 432990;
+      dl_frequencyBand                                                 = 66;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 430000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=106 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 12;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 66;
+      ul_absoluteFrequencyPointA                                    = 350000;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    amf_ip_address      = ( { ipv4       = "192.168.71.132";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.71.140";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.71.140";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+    {
+        num_cc                      = 1;
+        tr_s_preference             = "local_L1";
+        tr_n_preference             = "local_RRC";
+        ulsch_max_slots_inactivity  = 100;
+        pusch_TargetSNRx10          = 200;
+        pucch_TargetSNRx10          = 200;
+    }
+);
+
+L1s = (
+    {
+        num_cc = 1;
+        tr_n_preference = "local_mac";
+        pusch_proc_threads = 8;
+        prach_dtx_threshold = 200;
+  ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
+    }
+);
+
+RUs = (
+    {
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 75;
+         eNB_instances  = [0];
+         #beamforming 1x4 matrix:
+         bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
+         clock_src = "internal";
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+rfsimulator :
+{
+    serveraddr = "server";
+    serverport = "4043";
+    options = (); #("saviq"); or/and "chanmod"
+    modelname = "AWGN";
+    IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="info";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+       ngap_log_level                        ="debug";
+    };

ci-scripts/conf_files/gnb.sa.band66.u0.25prb.rfsim.conf

@@ -20,13 +20,6 @@ gNBs =
     sib1_tda                                                  = 5;
     min_rxtxtime                                              = 6;
 
-     pdcch_ConfigSIB1 = (
-      {
-        controlResourceSetZero = 2;
-        searchSpaceZero = 0;
-      }
-      );
-
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -36,7 +29,7 @@ gNBs =
 #  downlinkConfigCommon
     #frequencyInfoDL
       # this is 2150 MHz + 14 PRBs@15kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
-      absoluteFrequencySSB                                          = 430504;
+      absoluteFrequencySSB                                          = 430590;
       dl_frequencyBand                                              = 66;
       # this is 2150 MHz
       dl_absoluteFrequencyPointA                                    = 430000;

ci-scripts/conf_files/gnb.sa.band78.106prb.l2sim.conf

@@ -0,0 +1,223 @@
+Active_gNBs = ( "gnb-l2sim-vnf");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gnb-l2sim-vnf";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    min_rxtxtime = 6;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                             = 641280;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640008;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 12952; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 12;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 12952;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ( { ipv4       = "192.168.71.132";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eno1";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.128";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eno1";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.128";
+        GNB_PORT_FOR_NGU                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+        {
+        num_cc = 1;
+        local_s_if_name  = "lo:";
+        remote_s_address = "127.0.0.1"; // pnf addr [!]
+        local_s_address  = "127.0.0.2"; // vnf addr
+        local_s_portc    = 50601; // vnf p5 port
+        remote_s_portc   = 50600; // pnf p5 port [!]
+        local_s_portd    = 50611; // vnf p7 port [!]
+        remote_s_portd   = 50610; // pnf p7 port [!]
+        tr_s_preference = "nfapi";
+        tr_n_preference = "local_RRC";
+        }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="info";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+       ngap_log_level                         ="debug";
+    };

ci-scripts/conf_files/gnb.sa.band78.106prb.n310.7ds2u.conf

@@ -0,0 +1,261 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_CU_ID = 0xe00;
+
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ({sst = 1;}); });
+
+    nr_cellid = 12345678L
+
+    ////////// Physical parameters:
+
+    min_rxtxtime                                              = 5;
+    do_SRS                                                    = 0;
+    force_256qam_off                                          = 1;
+    pdsch_AntennaPorts_N1                                     = 1;
+    pdsch_AntennaPorts_XP                                     = 1;
+    pusch_AntennaPorts                                        = 1;
+
+
+    pdcch_ConfigSIB1 = (
+      {
+        controlResourceSetZero = 12;
+        searchSpaceZero = 0;
+      }
+    );
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+# downlinkConfigCommon
+    #frequencyInfoDL
+      dl_frequencyBand                                               = 78;
+      absoluteFrequencySSB                                           = 634080;
+      dl_absoluteFrequencyPointA                                     = 632808;
+      #scs-SpecificCarrierList
+      dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                         = 1;
+        dl_carrierBandwidth                                          = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=106 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                             = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                           = 12;
+        initialDLBWPsearchSpaceZero                                  = 0;
+
+#uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                               = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 106;
+      pMax                                                           = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                             = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                                = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                   = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                             = 0;
+          prach_msg1_FrequencyStart                                  = 0;
+          zeroCorrelationZoneConfig                                  = 12;
+          preambleReceivedTargetPower                                = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                           = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                             = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                            = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                 = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                    = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                 = 7;
+        rsrp_ThresholdSSB                                            = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                   = 2;
+        prach_RootSequenceIndex                                      = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                       = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                          = 0,
+
+        msg3_DeltaPreamble                                           = 1;
+        p0_NominalWithGrant                                          = -90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                            = 0;
+        hoppingId                                                    = 40;
+        p0_nominal                                                   = -70;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                        = 2;
+      ssb_PositionsInBurst_Bitmap                                    = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spar e1
+      ssb_periodicityServingCell                                     = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                            = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                              = 1;
+
+
+#tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                     = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                  = 6;
+      nrofDownlinkSlots                                              = 7;
+      nrofDownlinkSymbols                                            = 6;
+      nrofUplinkSlots                                                = 2;
+      nrofUplinkSymbols                                              = 4;
+
+      ssPBCH_BlockPower                                              = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    ////////// AMF parameters:
+        amf_ip_address      = ( { ipv4       = "172.21.6.100";
+                                  ipv6       = "192:168:30::17";
+                                  active     = "yes";
+                                  preference = "ipv4";
+                                                                                                                              }
+                                                                                                                                          );
+
+        NETWORK_INTERFACES :
+        {
+
+           GNB_INTERFACE_NAME_FOR_NG_AMF            = "eno33np0";
+           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.124/22";
+           GNB_INTERFACE_NAME_FOR_NGU               = "eno33np0";
+           GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.124/22";
+           GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc           = 1;
+  tr_s_preference  = "local_L1";
+  tr_n_preference  = "local_RRC";
+  pusch_TargetSNRx10 = 180;
+  pucch_TargetSNRx10 = 200;
+  ulsch_max_frame_inactivity = 1;
+  ul_max_mcs = 16;
+}
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference = "local_mac";
+  prach_dtx_threshold = 120;
+  #pucch0_dtx_threshold = 150;
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes";
+  nb_tx          = 1;
+  nb_rx          = 1;
+  att_tx         = 0;
+  att_rx         = 0;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 75;
+  eNB_instances  = [0];
+  ##beamforming 1x2 matrix: 1 layer x 2 antennas
+  bf_weights = [0x00007fff, 0x0000];
+  sf_extension = 0
+  sdr_addrs = "addr=192.168.80.52,clock_source=internal,time_source=internal"
+}
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  f1ap_log_level                        ="debug";
+  gtpu_log_level                        ="info";
+};
+

ci-scripts/conf_files/gnb.sa.band78.106prb.rfsim.2x2.conf

@@ -23,13 +23,6 @@ gNBs =
     do_SRS                                                    = 1;
     min_rxtxtime = 5;
 
-    pdcch_ConfigSIB1 = (
-      {
-        controlResourceSetZero = 12;
-        searchSpaceZero = 0;
-      }
-    );
-
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -39,10 +32,10 @@ gNBs =
 #  downlinkConfigCommon
     #frequencyInfoDL
       # this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
-      absoluteFrequencySSB                                             = 621312; # 641280
+      absoluteFrequencySSB                                             = 621312;
       dl_frequencyBand                                                 = 78;
       # this is 3300.60 MHz
-      dl_absoluteFrequencyPointA                                       = 620040; # 640008
+      dl_absoluteFrequencyPointA                                       = 620040;
       #scs-SpecificCarrierList
         dl_offstToCarrier                                              = 0;
 # subcarrierSpacing

ci-scripts/conf_files/gnb.sa.band78.106prb.rfsim.conf

@@ -1,4 +1,4 @@
-Active_gNBs = ( "gNB-OAI");
+Active_gNBs = ( "gnb-rfsim");
 # Asn1_verbosity, choice in: none, info, annoying
 Asn1_verbosity = "none";
 
@@ -10,12 +10,12 @@ gNBs =
 
 #     cell_type =  "CELL_MACRO_GNB";
 
-    gNB_name  =  "gNB-OAI";
+    gNB_name  =  "gnb-rfsim";
 
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code  =  1;
 
-    plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0x010203 }) });
+    plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
 
     nr_cellid = 12345678L
 
@@ -23,11 +23,7 @@ gNBs =
 
     ////////// Physical parameters:
 
-    pusch_AntennaPorts                                        = 2;
-    pdsch_AntennaPorts_XP                                     = 2;
-    ul_prbblacklist                                           = "51,52,53,54"
-    do_SRS                                                    = 0;
-    do_CSIRS                                                  = 1;
+    min_rxtxtime = 6;
 
     servingCellConfigCommon = (
     {
@@ -37,23 +33,10 @@ gNBs =
 
 #  downlinkConfigCommon
     #frequencyInfoDL
-      # this is 3301.68 MHz + 22*12*30e-3 MHz = 3309.6
-      #absoluteFrequencySSB                                          = 620640;
       # this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
       absoluteFrequencySSB                                          = 621312;
-      # this is 3503.28 MHz + 22*12*30e-3 MHz = 3511.2
-      #absoluteFrequencySSB                                          = 634080;
-      # this is 3600.48 MHz
-      #absoluteFrequencySSB                                          = 640032;
-      #dl_frequencyBand                                                 = 78;
-      # this is 3301.68 MHz
-      #dl_absoluteFrequencyPointA                                       = 620112;
       # this is 3300.60 MHz
       dl_absoluteFrequencyPointA                                       = 620040;
-      # this is 3502.56 MHz
-      #dl_absoluteFrequencyPointA                                       = 633552;
-      # this is 3600.48 MHz
-      #dl_absoluteFrequencyPointA                                       = 640032;
       #scs-SpecificCarrierList
         dl_offstToCarrier                                              = 0;
 # subcarrierSpacing
@@ -71,6 +54,8 @@ gNBs =
         initialDLBWPcontrolResourceSetZero                                      = 11;
         initialDLBWPsearchSpaceZero                                             = 0;
 
+
+
   #uplinkConfigCommon
      #frequencyInfoUL
       ul_frequencyBand                                                 = 78;
@@ -179,7 +164,7 @@ gNBs =
     };
 
     ////////// AMF parameters:
-        amf_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
+        amf_ip_address      = ( { ipv4       = "192.168.71.132";
                                   ipv6       = "192:168:30::17";
                                   active     = "yes";
                                   preference = "ipv4";
@@ -189,10 +174,10 @@ gNBs =
         NETWORK_INTERFACES :
         {
 
-           GNB_INTERFACE_NAME_FOR_NG_AMF            = "em1";
-           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "CI_GNB_IP_ADDR";
-           GNB_INTERFACE_NAME_FOR_NGU               = "em1";
-           GNB_IPV4_ADDRESS_FOR_NGU                 = "CI_GNB_IP_ADDR";
+           GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+           GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.71.140";
+           GNB_INTERFACE_NAME_FOR_NGU               = "eth0";
+           GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.71.140";
            GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
         };
 
@@ -204,9 +189,8 @@ MACRLCs = (
     num_cc           = 1;
     tr_s_preference  = "local_L1";
     tr_n_preference  = "local_RRC";
-    pusch_TargetSNRx10 = 220;
-    pucch_TargetSNRx10 = 220;
-    ulsch_max_frame_inactivity = 10;
+    pusch_TargetSNRx10 = 200;
+    pucch_TargetSNRx10 = 200;
   }
 );
 
@@ -222,8 +206,8 @@ L1s = (
 RUs = (
     {
        local_rf       = "yes"
-         nb_tx          = 2
-         nb_rx          = 2
+         nb_tx          = 1
+         nb_rx          = 1
          att_tx         = 0
          att_rx         = 0;
          bands          = [78];
@@ -239,7 +223,7 @@ RUs = (
          ## beamforming 4x4 matrix:
          #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
          sf_extension = 0
-         sdr_addrs = "mgmt_addr=172.21.19.14,addr=192.168.10.2,second_addr=192.168.20.2,clock_source=internal,time_source=internal"
+         sdr_addrs = "serial=XXXXXXX"
     }
 );
 
@@ -252,21 +236,25 @@ THREAD_STRUCT = (
   }
 );
 
+rfsimulator: {
+    serveraddr = "server";
+};
+
 security = {
   # preferred ciphering algorithms
   # the first one of the list that an UE supports in chosen
   # valid values: nea0, nea1, nea2, nea3
-  ciphering_algorithms = ( "nea2" );
+  ciphering_algorithms = ( "nea0" );
 
   # preferred integrity algorithms
   # the first one of the list that an UE supports in chosen
   # valid values: nia0, nia1, nia2, nia3
-  integrity_algorithms = ( "nia1", "nia2" );
+  integrity_algorithms = ( "nia2", "nia0" );
 
   # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
   # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
   drb_ciphering = "yes";
-  drb_integrity = "yes";
+  drb_integrity = "no";
 };
 
      log_config :
@@ -278,5 +266,5 @@ security = {
        rlc_log_level                         ="info";
        pdcp_log_level                        ="info";
        rrc_log_level                         ="info";
-       f1ap_log_level                        ="info";
+       f1ap_log_level                         ="debug";
     };

ci-scripts/conf_files/gnb.sa.band78.106prb.usrp310.2x2.conf

@@ -25,7 +25,6 @@ gNBs =
 
     pdsch_AntennaPorts_XP                                     = 2;
     pusch_AntennaPorts                                        = 2;
-    do_SRS                                                    = 0;
 
     servingCellConfigCommon = (
     {
@@ -35,23 +34,10 @@ gNBs =
 
 #  downlinkConfigCommon
     #frequencyInfoDL
-      # this is 3301.68 MHz + 22*12*30e-3 MHz = 3309.6
-      #absoluteFrequencySSB                                          = 620640;
       # this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
       absoluteFrequencySSB                                          = 621312;
-      # this is 3503.28 MHz + 22*12*30e-3 MHz = 3511.2
-      #absoluteFrequencySSB                                          = 634080;
-      # this is 3600.48 MHz
-      #absoluteFrequencySSB                                          = 640032;
-      #dl_frequencyBand                                                 = 78;
-      # this is 3301.68 MHz
-      #dl_absoluteFrequencyPointA                                       = 620112;
       # this is 3300.60 MHz
       dl_absoluteFrequencyPointA                                       = 620040;
-      # this is 3502.56 MHz
-      #dl_absoluteFrequencyPointA                                       = 633552;
-      # this is 3600.48 MHz
-      #dl_absoluteFrequencyPointA                                       = 640032;
       #scs-SpecificCarrierList
         dl_offstToCarrier                                              = 0;
 # subcarrierSpacing

ci-scripts/conf_files/gnb.sa.band78.106prb.usrpb200.sc-fdma.conf

@@ -0,0 +1,247 @@
+Active_gNBs = ( "gNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-in-docker";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3300.30 MHz + (19 PRBs + 10 SCs)@30kHz SCS (GSCN: 7715)
+      absoluteFrequencySSB                                             = 641280;
+      dl_frequencyBand                                                 = 78;
+      # this is 3300.30 MHz
+      dl_absoluteFrequencyPointA                                       = 640008;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 12;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+# SC-FDMA: 0 = enabled, 1 = disabled
+      msg3_transformPrecoder                                        = 0;
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ( { ipv4       = "172.21.16.137";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.68.194";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.68.194";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  pusch_TargetSNRx10          = 200;
+  pucch_TargetSNRx10          = 200;
+  ul_prbblack_SNR_threshold   = 10;
+  ulsch_max_frame_inactivity  = 10;
+  ul_max_mcs                  = 9;
+}
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  pucch0_dtx_threshold  = 100;
+  ofdm_offset_divisor   = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 1
+  nb_rx          = 1
+  att_tx         = 14;
+  att_rx         = 14;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 114;
+  eNB_instances  = [0];
+  #beamforming 1x4 matrix:
+  bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
+  clock_src = "internal";
+}
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="info";
+  f1ap_log_level                        ="info";
+};

ci-scripts/conf_files/gnb.sa.band78.106prb.usrpn310.ddsuu-2x2.conf

@@ -25,7 +25,6 @@ gNBs =
 
     pusch_AntennaPorts                                        = 2;
     ul_prbblacklist                                           = "51,52,53,54"
-    do_SRS                                                    = 0;
 
     servingCellConfigCommon = (
     {

ci-scripts/conf_files/gnb.sa.band78.162prb.usrpn310.2x2.conf

@@ -25,10 +25,7 @@ gNBs =
 
     pdsch_AntennaPorts_XP                                     = 2;
     pusch_AntennaPorts                                        = 2;
-    #pusch_TargetSNRx10                                        = 200;
-    #pucch_TargetSNRx10                                        = 200;
     ul_prbblacklist                                           = "79,80,81,82"
-    do_SRS                                                    = 0;
 
     servingCellConfigCommon = (
     {

ci-scripts/conf_files/gnb.sa.band78.24prb.rfsim.conf

@@ -17,7 +17,7 @@ gNBs =
 
     ////////// Physical parameters:
 
-    sib1_tda                                                  = 15;
+    sib1_tda = 15;
     min_rxtxtime = 6;
 
     servingCellConfigCommon = (
@@ -29,10 +29,10 @@ gNBs =
 #  downlinkConfigCommon
     #frequencyInfoDL
       # this is 3600 MHz + 12 PRBs@30kHz SCS (same as initial BWP)
-      absoluteFrequencySSB                                             = 640288;
+      absoluteFrequencySSB                                             = 640320;
       dl_frequencyBand                                                 = 78;
       # this is 3600 MHz
-      dl_absoluteFrequencyPointA                                       = 640000;
+      dl_absoluteFrequencyPointA                                       = 640032;
       #scs-SpecificCarrierList
         dl_offstToCarrier                                              = 0;
 # subcarrierSpacing
@@ -219,6 +219,10 @@ RUs = (
 }
 );
 
+rfsimulator: {
+    serveraddr = "server";
+};
+
 THREAD_STRUCT = (
 {
   #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
@@ -228,15 +232,6 @@ THREAD_STRUCT = (
 }
 );
 
-rfsimulator :
-{
-  serveraddr = "server";
-  serverport = "4043";
-  options = (); #("saviq"); or/and "chanmod"
-  modelname = "AWGN";
-  IQfile = "/tmp/rfsimulator.iqs";
-};
-
 security = {
   # preferred ciphering algorithms
   # the first one of the list that an UE supports in chosen

ci-scripts/conf_files/gnb.sa.band78.51prb.aw2s.ddsuu.conf

@@ -0,0 +1,291 @@
+Active_gNBs = ( "gNB-Eurecom-n78_20");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+#device :{
+# name = "aw2sori_transpro";
+#}
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_CU_ID = 0xe00;
+
+    gNB_name  =  "gNB-Eurecom-n78_20";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  0x1;
+    plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ({ sst =0x1; }) });
+
+    nr_cellid = 12345678L
+
+    ////////// Physical parameters:
+    pdsch_AntennaPorts_XP                                     = 2;
+    pusch_AntennaPorts                                        = 2;
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 0;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3410.4 MHz => 301 REs from PointA 25 PRBs + 1 RE
+      absoluteFrequencySSB                                             = 627360;
+      dl_frequencyBand                                                 = 78;
+      # this is 3410.4 - (51*12*30e-3/2) = 3401.22 MHz
+      dl_absoluteFrequencyPointA                                       = 626748;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 51;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=50 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 13750;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 11; # this means shift of 14, so Coreset is in PRBs 1..48, SSB starts at PRB 15
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 51;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 13750;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 15;
+          preambleReceivedTargetPower                               = -104;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-96;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -96;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 5;
+      nrofDownlinkSlots                                             = 2;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+  ssPBCH_BlockPower                                             = -10;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ( { ipv4       = "172.21.6.100";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eno33np0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.16.124/20";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eno33np0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.16.124/20";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc           = 1;
+    tr_s_preference  = "local_L1";
+    tr_n_preference  = "local_RRC";
+    pusch_TargetSNRx10 = 200;
+    pucch_TargetSNRx10 = 200;
+    ulsch_max_frame_inactivity = 10;
+    ul_max_mcs         = 28;
+  }
+);
+
+L1s = (
+        {
+        num_cc = 1;
+        tr_n_preference = "local_mac";
+        prach_dtx_threshold = 120;
+        pucch0_dtx_threshold = 50;
+        pusch_dtx_threshold = 10;
+        }
+);
+
+RUs = (
+    {
+        local_if_name  = "ens7f3";
+        remote_address = "192.168.80.239";
+        local_address  = "192.168.80.24";
+        local_portc    = 50000;
+        remote_portc   = 55444;
+        local_portd    = 52001;
+        remote_portd   = 52183;
+        local_rf       = "no"
+        tr_preference  = "udp_ecpri_if5"
+        nb_tx          = 2
+        nb_rx          = 2
+        att_tx         = 16
+        att_rx         = 0;
+        num_tp_cores   = 4;
+        rxfh_core_id   = 9;
+        txfh_core_id   = 10;
+        tp_cores       = [11,12,13,14];
+        nr_flag        = 1;
+        eNB_instances  = [0];
+        bands          = [78];
+        sl_ahead       = 5;
+        ##beamforming 1x2 matrix: 1 layer x 2 antennas
+        bf_weights = [0x00007fff, 0x0000];
+        ##beamforming 1x4 matrix: 1 layer x 4 antennas
+        #bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
+        ## beamforming 2x2 matrix:
+        # bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
+        ## beamforming 4x4 matrix:
+        #bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea2", "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "yes";
+};
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+       f1ap_log_level                         ="debug";
+       f1ap_log_verbosity                     ="medium";
+       ngap_log_level                         ="debug";
+       ngap_log_verbosity                     ="medium";
+    };
+

ci-scripts/conf_files/gnb.sa.band78.51prb.usrpb200.conf

@@ -0,0 +1,255 @@
+Active_gNBs = ( "gNB-in-docker");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-in-docker";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3300.30 MHz + (19 PRBs + 10 SCs)@30kHz SCS (GSCN: 7715)
+      absoluteFrequencySSB                                             = 620736;
+      dl_frequencyBand                                                 = 78;
+      # this is 3300.30 MHz
+      dl_absoluteFrequencyPointA                                       = 620020;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 51;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 13750;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 12;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 51;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 13750;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ( { ipv4       = "172.21.16.137";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.68.194";
+        GNB_INTERFACE_NAME_FOR_NGU               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.68.194";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  pusch_TargetSNRx10          = 200;
+  pucch_TargetSNRx10          = 200;
+  ul_prbblack_SNR_threshold   = 10;
+  ulsch_max_frame_inactivity  = 0;
+}
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  pucch0_dtx_threshold  = 100;
+  ofdm_offset_divisor   = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 1
+  nb_rx          = 1
+  att_tx         = 14;
+  att_rx         = 14;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 114;
+  eNB_instances  = [0];
+  #beamforming 1x4 matrix:
+  bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
+  clock_src = "internal";
+}
+);
+
+THREAD_STRUCT = (
+{
+  #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+  parallel_config    = "PARALLEL_SINGLE_THREAD";
+  #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+  worker_config      = "WORKER_ENABLE";
+}
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="debug";
+  f1ap_log_level                        ="debug";
+};

ci-scripts/conf_files/lte-ue.usim.conf

@@ -0,0 +1,153 @@
+# List of known PLMNS
+PLMN: {
+    PLMN0: {
+           FULLNAME="OpenAirInterface";
+           SHORTNAME="OAICN";
+           MNC="96";
+           MCC="208";
+    };
+};
+
+UE0:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000002";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};
+
+UE1:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000002";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};
+
+UE2:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000002";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};
+
+UE3:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000002";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};

ci-scripts/conf_files/lteue.band7.25prb.l2sim.conf

@@ -13,9 +13,9 @@ L1s = (
         {
 	num_cc = 1;
 	tr_n_preference = "nfapi";
-	local_n_if_name  = "ens3";
-	remote_n_address = "CI_ENB_IP_ADDR";
-	local_n_address  = "CI_UE_IP_ADDR";
+	local_n_if_name  = "eno1";
+	remote_n_address = "127.0.0.1";
+	local_n_address  = "127.0.0.1";
 	local_n_portc    = 50000;
 	remote_n_portc   = 50001;
 	local_n_portd    = 50010;

ci-scripts/conf_files/lteue.usim-ci.conf

@@ -0,0 +1,153 @@
+# List of known PLMNS
+PLMN: {
+    PLMN0: {
+           FULLNAME="OpenAirInterface";
+           SHORTNAME="OAICN";
+           MNC="96";
+           MCC="208";
+    };
+};
+
+UE0:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000001";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};
+
+UE1:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000001";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};
+
+UE2:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000001";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};
+
+UE3:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100000001";
+        USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
+        OPC="c42449363bbad02b66d16bc975d77cc1";
+        MSISDN="001011234561010";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};

ci-scripts/conf_files/lteue.usim-mbs.conf

@@ -3,7 +3,7 @@ PLMN: {
     PLMN0: {
            FULLNAME="OpenAirInterface";
            SHORTNAME="OAICN";
-           MNC="96";
+           MNC="93";
            MCC="208";
     };
 };
@@ -18,20 +18,20 @@ UE0:
     };
 
     SIM: {
-        MSIN="0100001111";
+        MSIN="100001111";
         USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
         OPC="e734f8734007d6c5ce7a0508809e7e9c";
         MSISDN="33611123456";
     };
 
     # Home PLMN Selector with Access Technology
-    HPLMN= "20896";
+    HPLMN= "20893";
 
     # User controlled PLMN Selector with Access Technology
     UCPLMN_LIST = ();
 
     # Operator PLMN List
-    OPLMN_LIST = ("20896");
+    OPLMN_LIST = ("20893");
 
     # Operator controlled PLMN Selector with Access Technology
     OCPLMN_LIST = ();
@@ -54,20 +54,20 @@ UE1:
     };
 
     SIM: {
-        MSIN="0100001111";
+        MSIN="100001111";
         USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
         OPC="e734f8734007d6c5ce7a0508809e7e9c";
         MSISDN="33611123456";
     };
 
     # Home PLMN Selector with Access Technology
-    HPLMN= "20896";
+    HPLMN= "20893";
 
     # User controlled PLMN Selector with Access Technology
     UCPLMN_LIST = ();
 
     # Operator PLMN List
-    OPLMN_LIST = ("20896");
+    OPLMN_LIST = ("20893");
 
     # Operator controlled PLMN Selector with Access Technology
     OCPLMN_LIST = ();
@@ -90,20 +90,20 @@ UE2:
     };
 
     SIM: {
-        MSIN="0100001111";
+        MSIN="100001111";
         USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
         OPC="e734f8734007d6c5ce7a0508809e7e9c";
         MSISDN="33611123456";
     };
 
     # Home PLMN Selector with Access Technology
-    HPLMN= "20896";
+    HPLMN= "20893";
 
     # User controlled PLMN Selector with Access Technology
     UCPLMN_LIST = ();
 
     # Operator PLMN List
-    OPLMN_LIST = ("20896");
+    OPLMN_LIST = ("20893");
 
     # Operator controlled PLMN Selector with Access Technology
     OCPLMN_LIST = ();
@@ -126,20 +126,20 @@ UE3:
     };
 
     SIM: {
-        MSIN="0100001111";
+        MSIN="100001111";
         USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
         OPC="e734f8734007d6c5ce7a0508809e7e9c";
         MSISDN="33611123456";
     };
 
     # Home PLMN Selector with Access Technology
-    HPLMN= "20896";
+    HPLMN= "20893";
 
     # User controlled PLMN Selector with Access Technology
     UCPLMN_LIST = ();
 
     # Operator PLMN List
-    OPLMN_LIST = ("20896");
+    OPLMN_LIST = ("20893");
 
     # Operator controlled PLMN Selector with Access Technology
     OCPLMN_LIST = ();

ci-scripts/conf_files/nr-ue-sim.conf

@@ -1,7 +0,0 @@
-uicc0 = {
-  imsi = "@FULL_IMSI@";
-  key = "@FULL_KEY@";
-  opc= "@OPC@";
-  dnn= "@DNN@";
-  nssai_sst=@NSSAI_SST@;
-}

ci-scripts/conf_files/nr-ue.nfapi.conf

@@ -1,37 +0,0 @@
-log_config = {
-  global_log_level                      ="info";
-  hw_log_level                          ="info";
-  phy_log_level                         ="info";
-  mac_log_level                         ="info";
-  rlc_log_level                         ="info";
-  pdcp_log_level                        ="info";
-  rrc_log_level                         ="info";
-};
-
-
-L1s = (
-        {
-	num_cc = 1;
-	tr_n_preference = "nfapi";
-	local_n_if_name  = "ens3";
-	remote_n_address = "127.0.0.1"; //Proxy IP
-	local_n_address  = "127.0.0.1";
-	local_n_portc    = 50600;
-	remote_n_portc   = 50601;
-	local_n_portd    = 50610;
-	remote_n_portd   = 50611;
-        }  
-);
-
-RUs = (
-    {
-       local_rf       = "yes"
-       nb_tx          = 1
-       nb_rx          = 1
-       att_tx         = 90
-       att_rx         = 0;
-       bands          = [7,38,42,43];
-       max_pdschReferenceSignalPower = -27;
-       max_rxgain                    = 125;
-    }
-);

ci-scripts/conf_files/nrue.band78.106prb.l2sim.conf

@@ -0,0 +1,32 @@
+log_config = {
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+};
+
+uicc0 = {
+imsi = "208990100001100";
+key = "fec86ba6eb707ed08905757b1bb44b8f";
+opc= "C42449363BBAD02B66D16BC975D77CC1";
+dnn= "oai";
+nssai_sst=1;
+nssai_sd=16777215;
+}
+
+MACRLCs = (
+        {
+        num_cc = 1;
+        tr_n_preference = "nfapi";
+        local_n_if_name  = "eno1";
+        remote_n_address = "127.0.0.1"; //Proxy IP
+        local_n_address  = "127.0.0.1";
+        local_n_portc    = 50600;
+        remote_n_portc   = 50601;
+        local_n_portd    = 50610;
+        remote_n_portd   = 50611;
+        }
+);

ci-scripts/conf_files/nrue.uicc.conf

@@ -0,0 +1,7 @@
+uicc0 = {
+  imsi = "208990100001100";
+  key = "fec86ba6eb707ed08905757b1bb44b8f";
+  opc= "C42449363BBAD02B66D16BC975D77CC1";
+  dnn= "oai";
+  nssai_sst=1;
+}

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf

@@ -1,262 +0,0 @@
-Active_eNBs = ( "eNB-Eurecom-LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
-    # real_time choice in {hard, rt-preempt, no}
-    real_time       =  "no";
-
-    ////////// Identification parameters:
-    eNB_ID    =  0xe00;
-
-    cell_type =  "CELL_MACRO_ENB";
-
-    eNB_name  =  "eNB-Eurecom-LTEBox";
-
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code = 1;
-    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
-
-    tr_s_preference     = "local_mac"
-
-    ////////// Physical parameters:
-
-    component_carriers = (
-      {
-      node_function             = "NGFI_RCC_IF4p5";
-      node_timing               = "synch_to_ext_device";
-      node_synch_ref            = 0;
-      frame_type					      = "FDD";
-      tdd_config 					      = 3;
-      tdd_config_s            			      = 0;
-      prefix_type             			      = "NORMAL";
-      eutra_band              			      = 7;
-      downlink_frequency      			      = 2680000000L;
-      uplink_frequency_offset 			      = -120000000;
-      Nid_cell					      = 0;
-      N_RB_DL                 			      = 100;
-      Nid_cell_mbsfn          			      = 0;
-      nb_antenna_ports                                = 1;
-      nb_antennas_tx          			      = 1;
-      nb_antennas_rx          			      = 1;
-      tx_gain                                            = 90;
-      rx_gain                                            = 125;
-      pbch_repetition                                 = "FALSE";
-      prach_root              			      = 0;
-      prach_config_index      			      = 0;
-      prach_high_speed        			      = "DISABLE";
-      prach_zero_correlation  			      = 1;
-      prach_freq_offset       			      = 2;
-      pucch_delta_shift       			      = 1;
-      pucch_nRB_CQI           			      = 0;
-      pucch_nCS_AN            			      = 0;
-      pucch_n1_AN             			      = 0;
-      pdsch_referenceSignalPower 			      = -29;
-      pdsch_p_b                  			      = 0;
-      pusch_n_SB                 			      = 1;
-      pusch_enable64QAM          			      = "DISABLE";
-      pusch_hoppingMode                                  = "interSubFrame";
-      pusch_hoppingOffset                                = 0;
-      pusch_groupHoppingEnabled  			      = "ENABLE";
-      pusch_groupAssignment      			      = 0;
-      pusch_sequenceHoppingEnabled		   	      = "DISABLE";
-      pusch_nDMRS1                                       = 1;
-      phich_duration                                     = "NORMAL";
-      phich_resource                                     = "ONESIXTH";
-      srs_enable                                         = "DISABLE";
-      /*  srs_BandwidthConfig                                =;
-      srs_SubframeConfig                                 =;
-      srs_ackNackST                                      =;
-      srs_MaxUpPts                                       =;*/
-
-      pusch_p0_Nominal                                   = -96;
-      pusch_alpha                                        = "AL1";
-      pucch_p0_Nominal                                   = -104;
-      msg3_delta_Preamble                                = 6;
-      pucch_deltaF_Format1                               = "deltaF2";
-      pucch_deltaF_Format1b                              = "deltaF3";
-      pucch_deltaF_Format2                               = "deltaF0";
-      pucch_deltaF_Format2a                              = "deltaF0";
-      pucch_deltaF_Format2b		    	      = "deltaF0";
-
-      rach_numberOfRA_Preambles                          = 64;
-      rach_preamblesGroupAConfig                         = "DISABLE";
-      /*
-      rach_sizeOfRA_PreamblesGroupA                      = ;
-      rach_messageSizeGroupA                             = ;
-      rach_messagePowerOffsetGroupB                      = ;
-      */
-      rach_powerRampingStep                              = 4;
-      rach_preambleInitialReceivedTargetPower            = -108;
-      rach_preambleTransMax                              = 10;
-      rach_raResponseWindowSize                          = 10;
-      rach_macContentionResolutionTimer                  = 48;
-      rach_maxHARQ_Msg3Tx                                = 4;
-
-      pcch_default_PagingCycle                           = 128;
-      pcch_nB                                            = "oneT";
-      bcch_modificationPeriodCoeff			      = 2;
-      ue_TimersAndConstants_t300			      = 1000;
-      ue_TimersAndConstants_t301			      = 1000;
-      ue_TimersAndConstants_t310			      = 1000;
-      ue_TimersAndConstants_t311			      = 10000;
-      ue_TimersAndConstants_n310			      = 20;
-      ue_TimersAndConstants_n311			      = 1;
-      ue_TransmissionMode                                    = 1;
-
-      //Parameters for SIB18
-      rxPool_sc_CP_Len                                       = "normal";
-      rxPool_sc_Period                                       = "sf40";
-      rxPool_data_CP_Len                                     = "normal";
-      rxPool_ResourceConfig_prb_Num                          = 20;
-      rxPool_ResourceConfig_prb_Start                        = 5;
-      rxPool_ResourceConfig_prb_End                          = 44;
-      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
-      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
-      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
-      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
-/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
-      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
-      rxPool_dataHoppingConfig_rbOffset                               = 0;
-      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
-*/
-      // Parameters for SIB19
-      discRxPool_cp_Len                                               = "normal"
-      discRxPool_discPeriod                                           = "rf32"
-      discRxPool_numRetx                                              = 1;
-      discRxPool_numRepetition                                        = 2;
-      discRxPool_ResourceConfig_prb_Num                               = 5;
-      discRxPool_ResourceConfig_prb_Start                             = 3;
-      discRxPool_ResourceConfig_prb_End                               = 21;
-      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
-      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
-      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
-      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
-
-      }
-    );
-
-
-    srb1_parameters :
-    {
-        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
-        timer_poll_retransmit    = 80;
-
-        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
-        timer_reordering         = 35;
-
-        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
-        timer_status_prohibit    = 0;
-
-        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
-        poll_pdu                 =  4;
-
-        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
-        poll_byte                =  99999;
-
-        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
-        max_retx_threshold       =  4;
-    }
-
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
-                              ipv6       = "192:168:30::17";
-                              port       = 36412 ;
-                              active     = "yes";
-                              preference = "ipv4";
-                            }
-                          );
-
-    enable_measurement_reports = "no";
-
-    ///X2
-    enable_x2 = "no";
-    t_reloc_prep      = 1000;      /* unit: millisecond */
-    tx2_reloc_overall = 2000;      /* unit: millisecond */
-    t_dc_prep         = 1000;      /* unit: millisecond */
-    t_dc_overall      = 2000;      /* unit: millisecond */
-
-    NETWORK_INTERFACES :
-    {
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-        ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
-        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
-    };
-  }
-);
-
-MACRLCs = (
-	{
-	num_cc = 1;
-	tr_s_preference = "local_L1";
-	tr_n_preference = "local_RRC";
-	phy_test_mode = 0;
-        puSch10xSnr     =  160;
-        puCch10xSnr     =  160;
-        }
-);
-
-L1s = (
-      {
-	num_cc = 1;
-	tr_n_preference = "local_mac";
-      }
-);
-
-RUs = (
-    {
-        local_if_name  = "lo";
-        remote_address = "127.0.0.2";
-        local_address  = "127.0.0.1";
-        local_portc    = 50000;
-        remote_portc   = 50000;
-        local_portd    = 50001;
-        remote_portd   = 50001;
-        local_rf       = "no"
-        tr_preference  = "udp_if4p5"
-        nb_tx          = 1
-        nb_rx          = 1
-        att_tx         = 0
-        att_rx         = 0;
-        eNB_instances  = [0];
-    }
-);
-
-THREAD_STRUCT = (
-  {
-    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_SINGLE_THREAD";
-    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
-    worker_config      = "WORKER_ENABLE";
-  }
-);
-
-     log_config :
-     {
-       global_log_level                      ="info";
-       hw_log_level                          ="info";
-       phy_log_level                         ="info";
-       mac_log_level                         ="info";
-       rlc_log_level                         ="info";
-       pdcp_log_level                        ="info";
-       rrc_log_level                         ="info";
-    };