fix(phy_procedures_nr_gNB): Increase the size of the thread info array in openair1/SCHED_NR/phy_procedures_nr_gNB.c

CMakeLists.txt

@@ -260,6 +260,7 @@ endif()
 
 # Debug related options
 #########################################
+add_boolean_option(DEBUG_ASN1 False "Enable ASN1 debug logs" OFF)
 # asn1c skeletons have hardcoded this flag to make customized debug logs
 # OAI uses this feature to re-use OAI LOG_I(ASN1, ...)
 # see common/utils/config.h
@@ -345,7 +346,6 @@ set(NGAP_DIR ${OPENAIR3_DIR}/NGAP)
 include_directories ("${NGAP_DIR}")
 add_library(ngap
   ${NGAP_DIR}/ngap_gNB.c
-  ${NGAP_DIR}/ngap_common.c
   ${NGAP_DIR}/ngap_gNB_context_management_procedures.c
   ${NGAP_DIR}/ngap_gNB_decoder.c
   ${NGAP_DIR}/ngap_gNB_encoder.c
@@ -485,6 +485,26 @@ target_link_libraries(params_libconfig PRIVATE config_internals ${libconfig_LIBR
 add_library(shlib_loader OBJECT common/utils/load_module_shlib.c)
 target_link_libraries(shlib_loader PRIVATE CONFIG_LIB)
 
+##########################################################
+
+# LDPC offload library - AMD T2 Accelerator Card
+##########################################################
+
+add_boolean_option(ENABLE_LDPC_T2 OFF "Build support for LDPC Offload to T2 library" OFF)
+if (ENABLE_LDPC_T2)
+  pkg_check_modules(LIBDPDK_T2 REQUIRED libdpdk=20.11.9)
+  find_library(PMD_T2 NAMES rte_baseband_accl_ldpc HINTS ${LIBDPDK_T2_LIBRARY_DIRS})
+  if (NOT PMD_T2)
+    message(FATAL_ERROR "could not find poll-mode driver for AccelerComm T2 LDPC Offload (rte_baseband_accl_ldpc.so)")
+  endif()
+  message(STATUS "T2 build: use ${PMD_T2}")
+  add_library(ldpc_t2 MODULE ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_offload.c)
+  set_target_properties(ldpc_t2 PROPERTIES COMPILE_FLAGS "-DALLOW_EXPERIMENTAL_API")
+  target_link_libraries(ldpc_t2 ${LIBDPDK_T2_LDFLAGS} ${PMD_T2})
+endif()
+
+##########################################################
+
 include_directories ("${OPENAIR_DIR}/radio/COMMON")
 
 ##############################################################
@@ -494,6 +514,7 @@ include_directories ("${OPENAIR_DIR}/radio/COMMON")
 add_boolean_option(UE_EXPANSION             False         "enable UE_EXPANSION with max 256 UE" ON)
 add_boolean_option(PHY_TX_THREAD            False         "enable UE_EXPANSION with max 256 UE" ON)
 add_boolean_option(PRE_SCD_THREAD           False         "enable UE_EXPANSION with max 256 UE" ON)
+add_boolean_option(UESIM_EXPANSION          False         "enable UESIM_EXPANSION with max 256 UE" ON)
 
 ##########################
 # SCHEDULING/REAL-TIME/PERF options
@@ -505,15 +526,20 @@ add_boolean_option(ENABLE_VCD_FIFO         False  "time measurements of proc cal
 ##########################
 # PHY options
 ##########################
-add_integer_option(MAX_NUM_CCs             1     "Carrier component data arrays size (oai doesn't support carrier aggreagtion for now)" ON)
+add_boolean_option(LOCALIZATION            False "???" ON)
+add_integer_option(MAX_NUM_CCs             1     "????" ON)
 add_boolean_option(SMBV                    False "Rohde&Schwarz SMBV100A vector signal generator" ON)
 add_boolean_option(DEBUG_PHY               False "Enable PHY layer debugging options" ON)
 add_boolean_option(DEBUG_PHY_PROC          False "Enable debugging of PHY layer procedures" ON)
+add_boolean_option(MEX                     False "Enabling compilation with mex" ON)
 
 ##########################
 # NAS LAYER OPTIONS
 ##########################
+add_boolean_option(ENABLE_NAS_UE_LOGGING   True  "????" ON)
 add_boolean_option(NAS_BUILT_IN_UE         True  "UE NAS layer present in this executable" ON)
+add_boolean_option(NAS_UE                  True  "NAS UE INSTANCE (<> NAS_MME)" ON)
+
 
 ##########################
 # RRC LAYER OPTIONS
@@ -710,7 +736,6 @@ set(NFAPI_PNF_SRC
 )
 add_library(NFAPI_PNF_LIB ${NFAPI_PNF_SRC})
 target_link_libraries(NFAPI_PNF_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
-target_link_libraries(NFAPI_PNF_LIB PUBLIC nr_fapi_p7)
 
 include_directories(${NFAPI_DIR}/pnf/public_inc)
 include_directories(${NFAPI_DIR}/pnf/inc)
@@ -741,13 +766,18 @@ set(NFAPI_USER_SRC
 add_library(NFAPI_USER_LIB ${NFAPI_USER_SRC})
 target_link_libraries(NFAPI_USER_LIB PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs UTIL)
 target_link_libraries(NFAPI_USER_LIB PRIVATE nr_fapi_p7)
-if(OAI_AERIAL)
-  target_compile_definitions(NFAPI_USER_LIB PRIVATE ENABLE_AERIAL)
-endif()
 include_directories(${NFAPI_USER_DIR})
 
 # Layer 1
 #############################
+set(PHY_TURBOSRC
+  ${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
+  ${OPENAIR1_DIR}/PHY/CODING/3gpplte.c
+  ${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c
+  ${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.c
+  ${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder_avx2_16bit.c
+  ${OPENAIR1_DIR}/PHY/CODING/3gpplte_turbo_decoder.c
+)
 set(PHY_POLARSRC
   ${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_polar_init.c
   ${OPENAIR1_DIR}/PHY/CODING/nrPolar_tools/nr_bitwise_operations.c
@@ -770,12 +800,76 @@ set(PHY_TURBOIF
   ${OPENAIR1_DIR}/PHY/CODING/coding_load.c
 )
 
-set(PHY_NRLDPC_CODINGIF
-  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_coding/nrLDPC_coding_interface_load.c
+set(PHY_LDPC_ORIG_SRC
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder.c
+)
+add_library(ldpc_orig MODULE ${PHY_LDPC_ORIG_SRC} )
+target_link_libraries(ldpc_orig PRIVATE ldpc_gen_HEADERS)
+
+set(PHY_LDPC_OPTIM_SRC
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim.c
+  )
+add_library(ldpc_optim MODULE ${PHY_LDPC_OPTIM_SRC} )
+target_link_libraries(ldpc_optim PRIVATE ldpc_gen_HEADERS)
+
+set(PHY_LDPC_OPTIM8SEG_SRC
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8seg.c
+)
+add_library(ldpc_optim8seg MODULE ${PHY_LDPC_OPTIM8SEG_SRC} )
+target_link_libraries(ldpc_optim8seg PRIVATE ldpc_gen_HEADERS)
+
+set(PHY_LDPC_OPTIM8SEGMULTI_SRC
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c
+  )
+add_library(ldpc MODULE ${PHY_LDPC_OPTIM8SEGMULTI_SRC} )
+target_link_libraries(ldpc PRIVATE ldpc_gen_HEADERS)
+
+set(PHY_LDPC_CUDA_SRC
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder_LYC/nrLDPC_decoder_LYC.cu
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c
 )
 
+set(PHY_LDPC_CL_SRC
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_CL.c
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c
+)
+add_custom_target( nrLDPC_decoder_kernels_CL
+                   COMMAND gcc ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_CL.c -dD -DNRLDPC_KERNEL_SOURCE -E -o ${CMAKE_CURRENT_BINARY_DIR}/nrLDPC_decoder_kernels_CL.clc
+                   SOURCES ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_CL.c
+)
+add_library(ldpc_cl MODULE ${PHY_LDPC_CL_SRC} )
+target_link_libraries(ldpc_cl OpenCL)
+add_dependencies(ldpc_cl nrLDPC_decoder_kernels_CL)
+
+set(PHY_NR_CODINGIF
+  ${OPENAIR1_DIR}/PHY/CODING/nrLDPC_load.c
+)
+
+##############################################
+# Base CUDA setting
+##############################################
+
+add_boolean_option(ENABLE_LDPC_CUDA OFF "Build support for CUDA" OFF)
+if (ENABLE_LDPC_CUDA)
+  find_package(CUDA REQUIRED)
+  SET(CUDA_NVCC_FLAG "${CUDA_NVCC_FLAGS};-arch=sm_60;")
+  SET(CUDA_VERBOSE_BUILD ON)
+  cuda_add_library(ldpc_cuda MODULE ${PHY_LDPC_CUDA_SRC})
+  set_target_properties(ldpc_cuda PROPERTIES CUDA_SEPARABLE_COMPILATION ON)
+  if (NOT CUDA_FOUND)
+    message(FATAL_ERROR "no CUDA found")
+  endif()
+endif()
+
+add_library(coding MODULE ${PHY_TURBOSRC} )
+
 add_library(dfts MODULE ${OPENAIR1_DIR}/PHY/TOOLS/oai_dfts.c ${OPENAIR1_DIR}/PHY/TOOLS/oai_dfts_neon.c)
 
+
 set(PHY_SRC_COMMON
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools_common.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
@@ -801,6 +895,8 @@ set(PHY_SRC_COMMON
   ${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_dl_mbsfn.c
   ${OPENAIR1_DIR}/PHY/LTE_REFSIG/lte_ul_ref.c
   ${OPENAIR1_DIR}/PHY/CODING/lte_segmentation.c
+  ${OPENAIR1_DIR}/PHY/CODING/nr_segmentation.c
+  ${OPENAIR1_DIR}/PHY/CODING/nr_rate_matching.c
   ${OPENAIR1_DIR}/PHY/CODING/ccoding_byte.c
   ${OPENAIR1_DIR}/PHY/CODING/ccoding_byte_lte.c
   ${OPENAIR1_DIR}/PHY/CODING/3gpplte_sse.c
@@ -895,7 +991,6 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/ulsch_coding.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/rar_tools_ue.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/initial_sync.c
-  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_mbsfn.c
   ${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz_ue.c
@@ -912,8 +1007,6 @@ set(PHY_SRC_UE
   )
 
   set(PHY_NR_SRC_COMMON
-  ${OPENAIR1_DIR}/PHY/CODING/nr_segmentation.c
-  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_tbs_tools.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach_common.c
   ${OPENAIR1_DIR}/PHY/nr_phy_common/src/nr_phy_common_csirs.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_scrambling.c
@@ -937,6 +1030,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_dlsch_coding.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_ulsch_decoding.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_ulsch.c
+  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_tbs_tools.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_sch_dmrs.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_ulsch_llr_computation.c
@@ -963,7 +1057,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
   ${PHY_POLARSRC}
   ${PHY_SMALLBLOCKSRC}
-  ${PHY_NRLDPC_CODINGIF}
+  ${PHY_NR_CODINGIF}
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/pucch_rx.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/srs_rx.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_uci_tools_common.c
@@ -984,6 +1078,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_dlsch_demodulation.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_ulsch_coding.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_dlsch_decoding.c
+  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_tbs_tools.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach_common.c
   ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_sch_dmrs.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/
@@ -1017,7 +1112,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/INIT/nr_init_ue.c
   ${PHY_POLARSRC}
   ${PHY_SMALLBLOCKSRC}
-  ${PHY_NRLDPC_CODINGIF}
+  ${PHY_NR_CODINGIF}
   )
 
 
@@ -1025,6 +1120,8 @@ if (${SMBV})
   set(PHY_SRC "${PHY_SRC} ${OPENAIR1_DIR}/PHY/TOOLS/smbv.c")
 endif  (${SMBV})
 
+set(PHY_SRC_UE ${PHY_SRC_UE} ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c)
+
 add_library(PHY_COMMON ${PHY_SRC_COMMON})
 target_link_libraries(PHY_COMMON PRIVATE shlib_loader)
 add_dependencies(PHY_COMMON dfts)
@@ -1060,6 +1157,28 @@ target_link_libraries(PHY_NR_UE PRIVATE asn1_nr_rrc_hdrs nr_phy_common nr_common
 add_library(PHY_RU ${PHY_SRC_RU})
 target_link_libraries(PHY_RU PRIVATE asn1_lte_rrc_hdrs UTIL)
 
+#Library for mex functions
+#########################3
+set(PHY_MEX_UE
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/linear_preprocessing_rec.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/lte_mcs.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/get_pmi.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pmch_common.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
+  ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/dlsch_llr_computation_avx2.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ue_measurements.c
+  )
+add_library(PHY_MEX ${PHY_MEX_UE})
+target_link_libraries(PHY_MEX PRIVATE asn1_lte_rrc_hdrs UTIL)
+
 #Layer 2 library
 #####################
 set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
@@ -1355,7 +1474,6 @@ add_library(L2_UE
   ${MAC_SRC_UE}
 )
 target_link_libraries(L2_UE PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
-target_link_libraries(L2_UE PRIVATE GTPV1U)
 
 add_library(L2_UE_LTE_NR
   ${L2_RRC_SRC_UE}
@@ -1824,7 +1942,6 @@ target_link_libraries(lte-softmodem PRIVATE
 target_link_libraries(lte-softmodem PRIVATE pthread m CONFIG_LIB rt sctp)
 target_link_libraries(lte-softmodem PRIVATE ${T_LIB})
 target_link_libraries(lte-softmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
-target_link_libraries(lte-softmodem PRIVATE ${blas_LIBRARIES} ${cblas_LIBRARIES} ${lapacke_LIBRARIES} ${lapack_LIBRARIES})
 
 if(E2_AGENT)
   target_compile_definitions(lte-softmodem PRIVATE ${E2AP_VERSION} ${KPM_VERSION} E2_AGENT)
@@ -1880,7 +1997,6 @@ target_link_libraries(lte-uesoftmodem PRIVATE
 target_link_libraries(lte-uesoftmodem PRIVATE pthread m CONFIG_LIB rt sctp)
 target_link_libraries(lte-uesoftmodem PRIVATE ${T_LIB})
 target_link_libraries(lte-uesoftmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
-target_link_libraries(lte-uesoftmodem PRIVATE ${blas_LIBRARIES} ${cblas_LIBRARIES} ${lapacke_LIBRARIES} ${lapack_LIBRARIES})
 
 # force the generation of ASN.1 so that we don't need to wait during the build
 target_link_libraries(lte-uesoftmodem PRIVATE
@@ -1927,6 +2043,12 @@ if(E2_AGENT)
 endif()
 
 
+add_dependencies(nr-softmodem ldpc_orig ldpc_optim ldpc_optim8seg ldpc)
+
+if (ENABLE_LDPC_T2)
+  add_dependencies(nr-softmodem ldpc_t2)
+endif()
+
 # force the generation of ASN.1 so that we don't need to wait during the build
 target_link_libraries(nr-softmodem PRIVATE
   asn1_lte_rrc asn1_nr_rrc asn1_s1ap asn1_ngap asn1_m2ap asn1_m3ap asn1_x2ap asn1_f1ap asn1_lpp)
@@ -1957,7 +2079,6 @@ add_executable(nr-uesoftmodem
   ${rrc_h}
   ${s1ap_h}
   ${OPENAIR_DIR}/executables/nr-uesoftmodem.c
-  ${OPENAIR_DIR}/executables/position_interface.c
   ${OPENAIR_DIR}/executables/nr-ue.c
   ${OPENAIR_DIR}/executables/softmodem-common.c
   ${OPENAIR_DIR}/radio/COMMON/common_lib.c
@@ -1979,6 +2100,12 @@ target_link_libraries(nr-uesoftmodem PRIVATE pthread m CONFIG_LIB rt nr_ue_phy_m
 target_link_libraries(nr-uesoftmodem PRIVATE ${T_LIB})
 target_link_libraries(nr-uesoftmodem PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
+add_dependencies( nr-uesoftmodem ldpc_orig ldpc_optim ldpc_optim8seg ldpc )
+if (ENABLE_LDPC_CUDA)
+   add_dependencies(nr-uesoftmodem ldpc_cuda)
+   add_dependencies(nr-softmodem ldpc_cuda)
+endif()
+
 # force the generation of ASN.1 so that we don't need to wait during the build
 target_link_libraries(nr-uesoftmodem PRIVATE
                       asn1_lte_rrc asn1_nr_rrc asn1_s1ap asn1_ngap asn1_m2ap asn1_m3ap asn1_x2ap asn1_f1ap asn1_lpp)
@@ -2029,11 +2156,17 @@ target_link_libraries(smallblocktest PRIVATE
 
 
 add_executable(ldpctest
+   ${PHY_NR_CODINGIF}
    ${OPENAIR1_DIR}/PHY/CODING/TESTBENCH/ldpctest.c
    )
+
+add_dependencies(ldpctest ldpc_orig ldpc_optim ldpc_optim8seg ldpc)
+if (ENABLE_LDPC_CUDA)
+  add_dependencies(ldpctest ldpc_cuda)
+endif()
 target_link_libraries(ldpctest PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON -Wl,--end-group
-  m pthread dl shlib_loader ${T_LIB} nr_coding_segment_utils
+  m pthread dl shlib_loader ${T_LIB}
   )
 
 add_executable(nr_dlschsim
@@ -2127,6 +2260,10 @@ add_executable(nr_ulsim
   ${PHY_INTERFACE_DIR}/queue_t.c
   )
 
+if (ENABLE_LDPC_T2)
+  add_dependencies(nr_ulsim ldpc_t2)
+endif()
+
 target_link_libraries(nr_ulsim PRIVATE
   -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON nr_rrc CONFIG_LIB L2_NR HASHTABLE x2ap SECURITY ngap -lz -Wl,--end-group
   m pthread ${T_LIB} ITTI dl shlib_loader nr_ue_phy_meas
@@ -2185,14 +2322,14 @@ if (${T_TRACER})
         #all "add_library" definitions
         ITTI lte_rrc nr_rrc s1ap x2ap m2ap m3ap f1ap
         params_libconfig oai_usrpdevif oai_bladerfdevif oai_lmssdrdevif oai_iqplayer
-        oai_eth_transpro oai_mobipass HASHTABLE UTIL OMG_SUMO
+        oai_eth_transpro oai_mobipass coding HASHTABLE UTIL OMG_SUMO
         SECURITY SCHED_LIB SCHED_NR_LIB SCHED_RU_LIB SCHED_UE_LIB SCHED_NR_UE_LIB default_sched remote_sched RAL
         NFAPI_LIB NFAPI_PNF_LIB NFAPI_VNF_LIB NFAPI_USER_LIB
         MISC_NFAPI_LTE_LIB MISC_NFAPI_NR_LIB
-        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU
+        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU PHY_MEX
         L2 L2_LTE L2_NR L2_LTE_NR L2_UE NR_L2_UE L2_UE_LTE_NR MAC_NR_COMMON MAC_UE_NR ngap
         CN_UTILS GTPV1U SCTP_CLIENT MME_APP LIB_NAS_UE NB_IoT SIMU OPENAIR0_LIB
-        dfts config_internals nr_common)
+        ldpc_orig ldpc_optim ldpc_optim8seg ldpc_t2 ldpc_cl ldpc_cuda ldpc dfts config_internals nr_common)
     if (TARGET ${i})
       add_dependencies(${i} generate_T)
     endif()

charts/physims/charts/dlsim.100rb+tm2/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.dlsim100rbtm2}}
       nodeName: {{ .Values.global.nodeName.dlsim100rbtm2 }}
       {{- end }}

charts/physims/charts/dlsim.basic/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.dlsimbasic}}
       nodeName: {{ .Values.global.nodeName.dlsimbasic }}
       {{- end }}

charts/physims/charts/ldpctest/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.ldpctest}}
       nodeName: {{ .Values.global.nodeName.ldpctest }}
       {{- end }}

charts/physims/charts/nr-dlschsim/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrdlschsim}}
       nodeName: {{ .Values.global.nodeName.nrdlschsim }}
       {{- end }}

charts/physims/charts/nr-dlsim.basic/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrdlsimbasic}}
       nodeName: {{ .Values.global.nodeName.nrdlsimbasic }}
       {{- end }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrdlsimdmrsptrs}}
       nodeName: {{ .Values.global.nodeName.nrdlsimdmrsptrs }}
       {{- end }}

charts/physims/charts/nr-dlsim.mcs+mimo/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrdlsimmcsmimo}}
       nodeName: {{ .Values.global.nodeName.nrdlsimmcsmimo }}
       {{- end }}

charts/physims/charts/nr-dlsim.offset/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrdlsimoffset}}
       nodeName: {{ .Values.global.nodeName.nrdlsimoffset }}
       {{- end }}

charts/physims/charts/nr-pbchsim.106rb/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrpbschsim106rb}}
       nodeName: {{ .Values.global.nodeName.nrpbschsim106rb }}
       {{- end }}

charts/physims/charts/nr-pbchsim.217rb/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrpbchsim217rb}}
       nodeName: {{ .Values.global.nodeName.nrpbchsim217rb }}
       {{- end }}

charts/physims/charts/nr-pbchsim.273rb/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrpbchsim273rb}}
       nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
       {{- end }}

charts/physims/charts/nr-pbchsim.scs/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrpbchsim273rb}}
       nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
       {{- end }}

charts/physims/charts/nr-prachsim/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrprachsim}}
       nodeName: {{ .Values.global.nodeName.nrprachsim }}
       {{- end }}

charts/physims/charts/nr-psbchsim/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrpsbchsim}}
       nodeName: {{ .Values.global.nodeName.nrpsbchsim }}
       {{- end }}

charts/physims/charts/nr-pucchsim/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrpucchsim}}
       nodeName: {{ .Values.global.nodeName.nrpucchsim }}
       {{- end }}

charts/physims/charts/nr-ulschsim/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrulschsim}}
       nodeName: {{ .Values.global.nodeName.nrulschsim }}
       {{- end }}

charts/physims/charts/nr-ulsim.3gpp/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrulsim3gpp}}
       nodeName: {{ .Values.global.nodeName.nrulsim3gpp }}
       {{- end }}

charts/physims/charts/nr-ulsim.mimo/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrulsimmimo}}
       nodeName: {{ .Values.global.nodeName.nrulsimmimo }}
       {{- end }}

charts/physims/charts/nr-ulsim.misc/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrulsimmisc}}
       nodeName: {{ .Values.global.nodeName.nrulsimmisc }}
       {{- end }}

charts/physims/charts/nr-ulsim.sc-fdma/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         ports:
@@ -44,6 +39,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.nrulsimscfdma}}
       nodeName: {{ .Values.global.nodeName.nrulsimscfdma }}
       {{- end }}

charts/physims/charts/polartest/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.polartest}}
       nodeName: {{ .Values.global.nodeName.polartest }}
       {{- end }}

charts/physims/charts/smallblocktest/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.smallblocktest}}
       nodeName: {{ .Values.global.nodeName.smallblocktest }}
       {{- end }}

charts/physims/charts/ulsim/templates/job.yaml

@@ -18,11 +18,6 @@ spec:
       - name: physim
         image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
         env:
@@ -42,6 +37,6 @@ spec:
       nodeSelector:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
-      {{- if .Values.global.nodeName}}
+      {{- if .Values.global.nodeName.ulsim}}
       nodeName: {{ .Values.global.nodeName.ulsim }}
       {{- end }}

charts/physims/values.yaml

@@ -1,21 +1,41 @@
 # Default values for oai-physim.
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
+
 global:
   serviceAccountName: oai-physim-sa
   namespace: "OAICICD_PROJECT"
-  image:
+  image: 
     registry: local
     repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran/oai-physim
     version: TAG
     # pullPolicy: IfNotPresent or Never or Always
     pullPolicy: Always
   # removing the node selector
-  # will place on two nodes intel 3rd gen and 5th gen with RT kernel
-  nodeSelector:
-    type: ran
-  nodeName: ''
-  resources:
-    define: false
-    requests:
-      cpu: 1.5
+  nodeSelector: {}
+  # It is not a good way of assigning pods to the nodes: this way we bypass the scheduler. At the moment we don't provide the resource information of these pods.
+  # Therefore, Openshift assigns the pods to the same node because it thinks the pods don't consume much resources. This isn't the case, they consume a lot of resources.
+  nodeName:
+    dlsim100rbtm2: acamas
+    dlsimbasic: acamas
+    ldpctest: acamas
+    nrdlschsim: acamas
+    nrdlsimbasic: acamas
+    nrdlsimdmrsptrs: acamas
+    nrdlsimmcsmimo: acamas
+    nrdlsimoffset: dedale
+    nrpbschsim106rb: dedale
+    nrpbchsim217rb: dedale
+    nrpbchsim273rb: dedale
+    nrpbchsimscs: dedale
+    nrpsbchsim: dedale
+    nrprachsim: dedale
+    nrpucchsim: dedale
+    nrulschsim: demophon
+    nrulsim3gpp: demophon
+    nrulsimmimo: demophon
+    nrulsimmisc: demophon
+    nrulsimscfdma: demophon
+    polartest: demophon
+    smallblocktest: demophon
+    ulsim: demophon

ci-scripts/Jenkinsfile-GitLab-Container

@@ -658,6 +658,9 @@ pipeline {
         if ("MERGE".equals(env.gitlabActionType)) {
           addGitLabMRComment comment: message
           def message2 = message + " -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
+          sendSocialMediaMessage('ci-enb', 'good', message2)
+        } else {
+          sendSocialMediaMessage('ci-enb', 'good', message)
         }
         echo "Pipeline is SUCCESSFUL"
       }
@@ -669,6 +672,9 @@ pipeline {
           def fullMessage = message + '\n\nList of failing test stages:' + failingStages
           addGitLabMRComment comment: fullMessage
           def message2 = message + " -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
+          sendSocialMediaMessage('ci-enb', 'danger', message2)
+        } else {
+          sendSocialMediaMessage('ci-enb', 'danger', message)
         }
         echo "Pipeline FAILED"
       }
@@ -792,3 +798,9 @@ def finalizeSlaveJob(jobName) {
     return artifactUrl
   }
 }
+
+// Abstraction function to send social media messages:
+// like on Slack or Mattermost
+def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
+  slackSend channel: pipeChannel, color: pipeColor, message: pipeMessage
+}

ci-scripts/args_parse.py

@@ -47,7 +47,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,CONTAINERS,HELP,SCA,PHYSIM,CLUSTER):
     py_param_file_present = False
     py_params={}
 
-    force_local = False
     while len(argvs) > 1:
         myArgv = argvs.pop(1)	# 0th is this file's name
 
@@ -55,9 +54,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,CONTAINERS,HELP,SCA,PHYSIM,CLUSTER):
         if re.match('^\-\-help$', myArgv, re.IGNORECASE):
             HELP.GenericHelp(CONST.Version)
             sys.exit(0)
-        if re.match('^\-\-local$', myArgv, re.IGNORECASE):
-            force_local = True
-
 
 	    #--apply=<filename> as parameters file, to replace inline parameters
         elif re.match('^\-\-Apply=(.+)$', myArgv, re.IGNORECASE):
@@ -275,4 +271,4 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,CONTAINERS,HELP,SCA,PHYSIM,CLUSTER):
             HELP.GenericHelp(CONST.Version)
             sys.exit('Invalid Parameter: ' + myArgv)
 
-    return py_param_file_present, py_params, mode, force_local
+    return py_param_file_present, py_params, mode

ci-scripts/checkCodingFormattingRules.sh

@@ -73,9 +73,9 @@ then
     do
        IS_NFAPI=`echo $FILE | grep -E -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext" || true`
        IS_OAI_LICENCE_PRESENT=`grep -E -c "OAI Public License" $FILE || true`
-       IS_BSD_LICENCE_PRESENT=`grep -E -c "the terms of the BSD Licence|License-Identifier: BSD-2-Clause|License-Identifier: BSD-3-Clause" $FILE || true`
+       IS_BSD_LICENCE_PRESENT=`grep -E -c "the terms of the BSD Licence|License-Identifier: BSD-2-Clause" $FILE || true`
        IS_MIT_LICENCE_PRESENT=`grep -E -c "MIT License" $FILE || true`
-       IS_EXCEPTION=`echo $FILE | grep -E -c "common/utils/collection/tree.h|common/utils/collection/queue.h|openair2/UTIL/OPT/packet-rohc.h|openair3/NAS/COMMON/milenage.h|openair1/PHY/CODING/crc.h|openair1/PHY/CODING/crcext.h|openair1/PHY/CODING/types.h" || true`
+       IS_EXCEPTION=`echo $FILE | grep -E -c "common/utils/collection/tree.h|common/utils/collection/queue.h|openair2/UTIL/OPT/packet-rohc.h|openair3/NAS/COMMON/milenage.h|openair1/PHY/CODING/crc.h|openair1/PHY/CODING/crcext.h|openair1/PHY/CODING/types.h|openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_offload.c|openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_offload.h" || true`
        if [ $IS_OAI_LICENCE_PRESENT -eq 0 ] && [ $IS_BSD_LICENCE_PRESENT -eq 0 ] && [ $IS_MIT_LICENCE_PRESENT -eq 0 ]
        then
            if [ $IS_NFAPI -eq 0 ] && [ $IS_EXCEPTION -eq 0 ]
@@ -184,9 +184,9 @@ do
         then
             IS_NFAPI=`echo $FULLFILE | grep -E -c "nfapi/open-nFAPI|nfapi/oai_integration/vendor_ext" || true`
             IS_OAI_LICENCE_PRESENT=`grep -E -c "OAI Public License" $FULLFILE || true`
-            IS_BSD_LICENCE_PRESENT=`grep -E -c "the terms of the BSD Licence|License-Identifier: BSD-2-Clause|License-Identifier: BSD-3-Clause" $FULLFILE || true`
+            IS_BSD_LICENCE_PRESENT=`grep -E -c "the terms of the BSD Licence|License-Identifier: BSD-2-Clause" $FULLFILE || true`
             IS_MIT_LICENCE_PRESENT=`grep -E -c "MIT License" $FULLFILE || true`
-            IS_EXCEPTION=`echo $FULLFILE | grep -E -c "common/utils/collection/tree.h|common/utils/collection/queue.h|openair2/UTIL/OPT/packet-rohc.h|openair3/NAS/COMMON/milenage.h|openair1/PHY/CODING/crc.h|openair1/PHY/CODING/crcext.h|openair1/PHY/CODING/types.h" || true`
+            IS_EXCEPTION=`echo $FULLFILE | grep -E -c "common/utils/collection/tree.h|common/utils/collection/queue.h|openair2/UTIL/OPT/packet-rohc.h|openair3/NAS/COMMON/milenage.h|openair1/PHY/CODING/crc.h|openair1/PHY/CODING/crcext.h|openair1/PHY/CODING/types.h|openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_offload.c|openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_offload.h" || true`
             if [ $IS_OAI_LICENCE_PRESENT -eq 0 ] && [ $IS_BSD_LICENCE_PRESENT -eq 0 ] && [ $IS_MIT_LICENCE_PRESENT -eq 0 ]
             then
                 if [ $IS_NFAPI -eq 0 ] && [ $IS_EXCEPTION -eq 0 ]

ci-scripts/ci_infra.yaml

@@ -64,21 +64,21 @@ adb_ue_2:
 oc-cn5g:
   Host: avra
   Namespace: "oaicicd-core-for-ci-ran"
-  CNPath: "/opt/oai-cn5g-fed-develop-2025-jan"
+  CNPath: "/opt/oai-cn5g-fed-develop-2024-april-00102"
   NetworkScript: echo "inet 172.21.6.102"
   RunIperf3Server: False
 
 oc-cn5g-20897:
   Host: cacofonix
   Namespace: "oaicicd-core-for-fhi72"
-  CNPath: "/opt/oai-cn5g-fed-develop-2025-jan"
+  CNPath: "/opt/oai-cn5g-fed-develop-2024-april-20897"
   NetworkScript: echo "inet 172.21.6.105"
   RunIperf3Server: False
 
 oc-cn5g-20897-aerial2:
   Host: aerial2
-  Namespace: "oaicicd-core-for-nvidia-aerial"
-  CNPath: "/opt/oai-cn5g-fed-develop-2025-jan"
+  Namespace: "oaicicd-core-for-fhi72"
+  CNPath: "/opt/oai-cn5g-fed-develop-2024-april-20897"
   NetworkScript: echo "inet 172.21.6.105"
   RunIperf3Server: False
 

ci-scripts/cls_cluster.py

@@ -129,9 +129,19 @@ class Cluster:
 
 	def _recreate_entitlements(self):
 		# recreating entitlements, don't care if deletion fails
-		self.cmd.run(f'oc delete secret etc-pki-entitlement')
-		ret = self.cmd.run(f"oc get secret etc-pki-entitlement -n openshift-config-managed -o json | jq 'del(.metadata.resourceVersion)' | jq 'del(.metadata.creationTimestamp)' | jq 'del(.metadata.uid)' | jq 'del(.metadata.namespace)' | oc create -f -", silent=True)
-		if ret.returncode != 0:
+		self.cmd.run('oc delete secret etc-pki-entitlement')
+		ret = self.cmd.run('ls /etc/pki/entitlement/???????????????????.pem | tail -1', silent=True)
+		regres1 = re.search(r"/etc/pki/entitlement/[0-9]+.pem", ret.stdout)
+		ret = self.cmd.run('ls /etc/pki/entitlement/???????????????????-key.pem | tail -1', silent=True)
+		regres2 = re.search(r"/etc/pki/entitlement/[0-9]+-key.pem", ret.stdout)
+		if regres1 is None or regres2 is None:
+			logging.error("could not find entitlements")
+			return False
+		file1 = regres1.group(0)
+		file2 = regres2.group(0)
+		ret = self.cmd.run(f'oc create secret generic etc-pki-entitlement --from-file {file1} --from-file {file2}')
+		regres = re.search(r"secret/etc-pki-entitlement created", ret.stdout)
+		if ret.returncode != 0 or regres is None:
 			logging.error("could not create secret/etc-pki-entitlement")
 			return False
 		return True
@@ -208,7 +218,7 @@ class Cluster:
 			return -1
 		return int(result.group("size"))
 
-	def _deploy_pod(self, filename, timeout = 120):
+	def _deploy_pod(self, filename, timeout = 30):
 		ret = self.cmd.run(f'oc create -f {filename}')
 		result = re.search(f'pod/(?P<pod>[a-zA-Z0-9_\-]+) created', ret.stdout)
 		if result is None:
@@ -216,9 +226,11 @@ class Cluster:
 			return None
 		pod = result.group("pod")
 		logging.debug(f'checking if pod {pod} is in Running state')
-		ret = self.cmd.run(f'oc wait --for=condition=ready pod {pod} --timeout={timeout}s', silent=True)
-		if ret.returncode == 0:
-			return pod
+		while timeout > 0:
+			ret = self.cmd.run(f'oc get pod {pod} -o json | jq -Mc .status.phase', silent=True)
+			if re.search('"Running"', ret.stdout) is not None: return pod
+			timeout -= 1
+			time.sleep(1)
 		logging.error(f'pod {pod} did not reach Running state')
 		self._undeploy_pod(filename)
 		return None

ci-scripts/cls_cmd.py

@@ -217,8 +217,6 @@ class RemoteCmd(Cmd):
 		return client
 
 	def _lookup_ssh_config(hostname):
-		if is_local(hostname):
-			raise ValueError("Using localhost as SSH target is not allowed: use LocalCmd instead.")
 		ssh_config = paramiko.SSHConfig()
 		user_config_file = os.path.expanduser("~/.ssh/config")
 		if os.path.exists(user_config_file):

ci-scripts/cls_physim1.py

@@ -137,7 +137,9 @@ class PhySim:
 			logging.debug(f'\u001B[1m   Now using project {ocProjectName}\u001B[0m')
 
 		# Using helm charts deployment
-		mySSH.command(f'helm install physim ./charts/physims/ --set global.image.version={imageTag} --wait 2>&1 | tee -a cmake_targets/log/physim_helm_summary.txt', '\$', 30)
+		mySSH.command(f'grep -rl OAICICD_PROJECT ./charts/ | xargs sed -i -e "s#OAICICD_PROJECT#{ocProjectName}#"', '\$', 30)
+		mySSH.command(f'sed -i -e "s#TAG#{imageTag}#g" ./charts/physims/values.yaml', '\$', 6)
+		mySSH.command('helm install physim ./charts/physims/ --wait 2>&1 | tee -a cmake_targets/log/physim_helm_summary.txt', '\$', 30)
 		if mySSH.getBefore().count('STATUS: deployed') == 0:
 			logging.error('\u001B[1m Deploying PhySim Failed using helm chart on OC Cluster\u001B[0m')
 			mySSH.command('helm uninstall physim | tee -a cmake_targets/log/physim_helm_summary.txt 2>&1', '\$', 30)

ci-scripts/conf_files/gnb-du.sa.band1.52prb.usrpb210.conf

@@ -91,8 +91,8 @@ gNBs =
         ra_ResponseWindow                                              = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                   = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                   = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                      = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb-du.sa.band78.106prb.rfsim.conf

@@ -90,7 +90,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb-du.sa.band78.106prb.usrpb200.conf

@@ -92,7 +92,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64
@@ -194,7 +194,7 @@ RUs = (
        local_rf       = "yes"
          nb_tx          = 1
          nb_rx          = 1
-         att_tx         = 18;
+         att_tx         = 10;
          att_rx         = 10;
          bands          = [78];
          max_pdschReferenceSignalPower = -27;

ci-scripts/conf_files/gnb-pnf.band66.rfsim.conf

@@ -1,43 +0,0 @@
-L1s = (
-{
-  num_cc = 1;
-  tr_n_preference       = "nfapi";
-  remote_n_address = "192.168.71.140"; // vnf addr
-  local_n_address  = "192.168.71.141"; // pnf addr
-  local_n_portc    = 50000; // pnf p5 port [!]
-  remote_n_portc   = 50001; // vnf p5 port
-  local_n_portd    = 50010; // pnf p7 port
-  remote_n_portd   = 50011; // vnf p7 port
-  prach_dtx_threshold   = 120;
-  pucch0_dtx_threshold  = 150;
-  ofdm_offset_divisor   = 8; #set this to UINT_MAX for offset 0
-}
-);
-
-RUs = ({
-  local_rf       = "yes";
-  nb_tx          = 1;
-  nb_rx          = 1;
-  att_tx         = 0;
-  att_rx         = 0;
-  bands          = [7];
-  max_pdschReferenceSignalPower = -27;
-  max_rxgain                    = 114;
-  sf_extension                  = 0;
-  eNB_instances  = [0];
-});
-
-rfsimulator :
-{
-  serveraddr = "server";
-  serverport = 4043;
-  options = (); #("saviq"); or/and "chanmod"
-  modelname = "AWGN";
-  IQfile = "/tmp/rfsimulator.iqs";
-};
-
-log_config: {
-  global_log_level = "info";
-  hw_log_level     = "info";
-  phy_log_level    = "info";
-};

ci-scripts/conf_files/gnb-pnf.band77.usrpn310.4x4.conf

@@ -1,31 +0,0 @@
-usrp-tx-thread-config = 1;
-tune-offset = 30720000;
-
-L1s = ({
-  num_cc = 1;
-  tr_n_preference = "nfapi";
-  remote_n_address = "127.0.0.1"; // vnf addr
-  local_n_address  = "127.0.0.1"; // pnf addr
-  local_n_portc    = 50000; // pnf p5 port [!]
-  remote_n_portc   = 50001; // vnf p5 port
-  local_n_portd    = 50010; // pnf p7 port
-  remote_n_portd   = 50011; // vnf p7 port
-  prach_dtx_threshold = 120;
-  pusch_dtx_threshold = 20;
-  max_ldpc_iterations = 10;
-});
-
-RUs = ({
-  local_rf       = "yes"
-  nb_tx          = 4;
-  nb_rx          = 4;
-  att_tx         = 0;
-  att_rx         = 0;
-  bands          = [77];
-  max_pdschReferenceSignalPower = -27;
-  max_rxgain     = 75;
-  eNB_instances  = [0];
-  #clock_src = "internal";
-  sdr_addrs = "addr=192.168.80.53, clock_source=internal,time_source=internal"
-});
-

ci-scripts/conf_files/gnb-vnf.sa.band78.273prb.aerial.conf

@@ -35,6 +35,13 @@ gNBs =
     do_SRS                = 0;
     min_rxtxtime          = 2;
 
+    pdcch_ConfigSIB1 = (
+      {
+        controlResourceSetZero = 12;
+        searchSpaceZero = 0;
+      }
+    );
+
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -109,8 +116,8 @@ gNBs =
         ra_ResponseWindow                                           = 5;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.band66.106prb.rfsim.phytest-dora.conf

@@ -90,7 +90,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.band78.106prb.rfsim.phytest-dora.conf

@@ -89,7 +89,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.band78.106prb.usrpn300.phytest-dora.conf

@@ -31,11 +31,11 @@ gNBs =
 
 #  downlinkConfigCommon
     #frequencyInfoDL
-      # this is 3319.68 MHz
-      absoluteFrequencySSB                                             = 621312;
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 641032;
       dl_frequencyBand                                                 = 78;
-      # this is 3300.6 MHz
-      dl_absoluteFrequencyPointA                                       = 620040;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640000;
       #scs-SpecificCarrierList
         dl_offstToCarrier                                              = 0;
 # subcarrierSpacing
@@ -89,7 +89,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.band78.162prb.usrpn300.phytest-dora.conf

@@ -89,7 +89,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.band78.273prb.usrpn300.phytest-dora.conf

@@ -91,7 +91,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.nsa.band78.106prb.usrpb200.conf

@@ -84,8 +84,8 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14; //15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64
         ra_ContentionResolutionTimer                                = 7;

ci-scripts/conf_files/gnb.nsa.band78.106prb.usrpn310.2x2.conf

@@ -89,8 +89,8 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14; //15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64
         ra_ContentionResolutionTimer                                = 7;

ci-scripts/conf_files/gnb.sa.band261.u3.32prb.rfsim.conf

@@ -88,8 +88,8 @@ gNBs =
         ra_ResponseWindow                                           = 5;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band66.106prb.rfsim.conf

@@ -87,7 +87,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band66.ntn.25prb.rfsim.conf

@@ -88,7 +88,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64
@@ -148,13 +148,6 @@ gNBs =
   #ext2
     #ntn_Config_r17
       cellSpecificKoffset_r17                                       = 478;
-      ta-Common-r17                                                 = 29314900;
-      positionX-r17                                                 = 0;
-      positionY-r17                                                 = 0;
-      positionZ-r17                                                 = 32433846;
-      velocityVX-r17                                                = 0;
-      velocityVY-r17                                                = 0;
-      velocityVZ-r17                                                = 0;
   }
 
   );

ci-scripts/conf_files/gnb.sa.band66.u0.25prb.rfsim.conf

@@ -88,7 +88,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band77.162prb.usrpn310.2x2.conf

@@ -91,8 +91,8 @@ gNBs =
         ra_ResponseWindow                                           = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band77.162prb.usrpn310.4x4.conf

@@ -93,8 +93,8 @@ gNBs =
         ra_ResponseWindow                                           = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64
@@ -210,6 +210,8 @@ RUs = (
   max_pdschReferenceSignalPower = -27;
   max_rxgain     = 75;
   eNB_instances  = [0];
+  ##beamforming 1x2 matrix: 1 layer x 2 antennas
+  bf_weights = [0x00007fff, 0x0000, 0x00007fff, 0x0000];
   #clock_src = "internal";
   sdr_addrs = "addr=192.168.80.53, clock_source=internal,time_source=internal"
 

ci-scripts/conf_files/gnb.sa.band77.273prb.fhi72.4x4-vvdn.conf

@@ -24,6 +24,13 @@ gNBs =
     do_CSIRS              = 1;
     do_SRS                = 0;
 
+    pdcch_ConfigSIB1 = (
+      {
+        controlResourceSetZero = 11;
+        searchSpaceZero = 0;
+      }
+    );
+
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -88,8 +95,8 @@ gNBs =
         ra_ResponseWindow                                           = 5;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band77.273prb.fhi72.4x4.2L-metanoia.conf

@@ -1,255 +0,0 @@
-Active_gNBs = ( "oai-du");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-gNBs =
-(
- {
-    ////////// Identification parameters:
-    gNB_ID    =  0xe00;
-    gNB_name  =  "oai-du";
-    // Tracking area code, 0x0000 and 0xfffe are reserved values
-    tracking_area_code  =  1;
-    plmn_list = ({ mcc = 208; mnc = 97; mnc_length = 2; snssaiList = ( { sst = 1; }); });
-    nr_cellid = 1;
-
-    ////////// Physical parameters:
-    pdsch_AntennaPorts_XP = 2;
-    pusch_AntennaPorts    = 4;
-    pdsch_AntennaPorts_N1 = 2;
-    maxMIMO_layers        = 2;
-    do_CSIRS              = 1;
-    do_SRS                = 0;
-    force_UL256qam_off    = 1;
-
-    servingCellConfigCommon = (
-    {
-#spCellConfigCommon
-      physCellId                                                    = 0;
-#  downlinkConfigCommon
-    #frequencyInfoDL
-      # this is 3300.24 + 134*12*30e3 = 3348.48 MHz (5G NR GSCN: 7741)
-      absoluteFrequencySSB                                          = 649920; #JF maybe we should adjust a bit
-      dl_frequencyBand                                              = 78;
-      # this is 3300.24 MHz
-      dl_absoluteFrequencyPointA                                    = 646724;
-      #scs-SpecificCarrierList
-        dl_offstToCarrier                                           = 0;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        dl_subcarrierSpacing                                        = 1;
-        dl_carrierBandwidth                                         = 273;
-     #initialDownlinkBWP
-      #genericParameters
-       # this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
-       initialDLBWPlocationAndBandwidth                             = 1099;
-       #
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        initialDLBWPsubcarrierSpacing                               = 1;
-      #pdcch-ConfigCommon
-        initialDLBWPcontrolResourceSetZero                          = 12;
-        initialDLBWPsearchSpaceZero                                 = 0;
-  #uplinkConfigCommon
-     #frequencyInfoUL
-      ul_frequencyBand                                              = 78;
-      #scs-SpecificCarrierList
-      ul_offstToCarrier                                             = 0;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      ul_subcarrierSpacing                                          = 1;
-      ul_carrierBandwidth                                           = 273;
-      pMax                                                          = 20;
-     #initialUplinkBWP
-      #genericParameters
-        initialULBWPlocationAndBandwidth                            = 1099;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-        initialULBWPsubcarrierSpacing                               = 1;
-      #rach-ConfigCommon
-        #rach-ConfigGeneric
-          prach_ConfigurationIndex                                  = 148; # JF check this and other PRACH related params
-#prach_msg1_FDM
-#0 = one, 1=two, 2=four, 3=eight
-          prach_msg1_FDM                                            = 0;
-          prach_msg1_FrequencyStart                                 = 0;
-          zeroCorrelationZoneConfig                                 = 12;
-          preambleReceivedTargetPower                               = -96;
-#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
-          preambleTransMax                                          = 6;
-#powerRampingStep
-# 0=dB0,1=dB2,2=dB4,3=dB6
-        powerRampingStep                                            = 1;
-#ra_ReponseWindow
-#1,2,4,8,10,20,40,80
-        ra_ResponseWindow                                           = 5;
-#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
-#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
-#ra_ContentionResolutionTimer
-#(0..7) 8,16,24,32,40,48,56,64
-        ra_ContentionResolutionTimer                                = 7;
-        rsrp_ThresholdSSB                                           = 19;
-#prach-RootSequenceIndex_PR
-#1 = 839, 2 = 139
-        prach_RootSequenceIndex_PR                                  = 2;
-        prach_RootSequenceIndex                                     = 1;
-        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
-        #
-        msg1_SubcarrierSpacing                                      = 1,
-# restrictedSetConfig
-# 0=unrestricted, 1=restricted type A, 2=restricted type B
-        restrictedSetConfig                                         = 0,
-        msg3_DeltaPreamble                                          = 1;
-        p0_NominalWithGrant                                         = -90;
-# pucch-ConfigCommon setup :
-# pucchGroupHopping
-# 0 = neither, 1= group hopping, 2=sequence hopping
-        pucchGroupHopping                                           = 0;
-        hoppingId                                                   = 40;
-        p0_nominal                                                  = -90;
-# ssb_PositionsInBurs_BitmapPR
-# 1=short, 2=medium, 3=long
-      ssb_PositionsInBurst_Bitmap                                   = 1;
-# ssb_periodicityServingCell
-# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
-      ssb_periodicityServingCell                                    = 2;
-# dmrs_TypeA_position
-# 0 = pos2, 1 = pos3
-      dmrs_TypeA_Position                                           = 0;
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      subcarrierSpacing                                             = 1;
-  #tdd-UL-DL-ConfigurationCommon
-# subcarrierSpacing
-# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-      referenceSubcarrierSpacing                                    = 1;
-      # pattern1
-      # dl_UL_TransmissionPeriodicity
-      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
-      dl_UL_TransmissionPeriodicity                                 = 5; #6;
-      nrofDownlinkSlots                                             = 3; #7;
-      nrofDownlinkSymbols                                           = 6;
-      nrofUplinkSlots                                               = 1; #2;
-      nrofUplinkSymbols                                             = 4;
-      ssPBCH_BlockPower                                             = -10;
-  }
-  );
-    # ------- SCTP definitions
-    SCTP :
-    {
-        # Number of streams to use in input/output
-        SCTP_INSTREAMS  = 2;
-        SCTP_OUTSTREAMS = 2;
-    };
-
-        ////////// AMF parameters:
-    amf_ip_address = ({ ipv4 = "172.21.6.103"; });
-
-    NETWORK_INTERFACES :
-    {
-        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.21.18.20";
-        GNB_IPV4_ADDRESS_FOR_NGU                 = "172.21.18.20";
-        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
-    };
-  }
-);
-MACRLCs = (
-{
-  num_cc                      = 1;
-  tr_s_preference             = "local_L1";
-  tr_n_preference             = "local_RRC";
-  pusch_TargetSNRx10          = 220;
-  pucch_TargetSNRx10          = 220;
-  ul_bler_target_upper=.35;
-  ul_bler_target_lower=.15;
-  pusch_FailureThres          = 100;
-  ul_max_mcs                  = 28;
-}
-);
-L1s = (
-{
-  num_cc = 1;
-  tr_n_preference = "local_mac";
-  prach_dtx_threshold = 130;
-  pucch0_dtx_threshold = 80;
-  pusch_dtx_threshold = 10;
-  max_ldpc_iterations = 10;
-  tx_amp_backoff_dB = 12; #9; needs to match O-RU configuration # JF important to check
-  L1_rx_thread_core = 3;
-  L1_tx_thread_core = 4; # relevant after merge of l1_tx_thread
-  phase_compensation = 0; # needs to match O-RU configuration # JF to be tested
-}
-);
-RUs = (
-{
-  local_rf       = "no";
-  nb_tx          = 4;
-  nb_rx          = 4;
-  att_tx         = 0
-  att_rx         = 0;
-  bands          = [78];
-  max_pdschReferenceSignalPower = -27;
-  max_rxgain                    = 75;
-  sf_extension                  = 0;
-  eNB_instances  = [0];
-  ru_thread_core = 6;
-  sl_ahead       = 10; #5;
-  ##beamforming 1x2 matrix: 1 layer x 2 antennas
-  bf_weights = [0x00007fff, 0x0000,0x00007fff, 0x0000];
-  tr_preference  = "raw_if4p5"; # important: activate FHI7.2
-  do_precoding = 0; # needs to match O-RU configuration
-}
-);
-
-security = {
-  # preferred ciphering algorithms
-  # the first one of the list that an UE supports in chosen
-  # valid values: nea0, nea1, nea2, nea3
-  ciphering_algorithms = ( "nea0" );
-
-  # preferred integrity algorithms
-  # the first one of the list that an UE supports in chosen
-  # valid values: nia0, nia1, nia2, nia3
-  integrity_algorithms = ( "nia2", "nia0" );
-
-  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
-  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
-  drb_ciphering = "yes";
-  drb_integrity = "no";
-};
-
-log_config :
-{
-  global_log_level                      ="info";
-  hw_log_level                          ="info";
-  phy_log_level                         ="info";
-  mac_log_level                         ="info";
-  rlc_log_level                         ="info";
-  pdcp_log_level                        ="info";
-  rrc_log_level                         ="info";
-  ngap_log_level                        ="info";
-  f1ap_log_level                        ="info";
-};
-
-fhi_72 = {
-  dpdk_devices = ("0000:c3:11.0", "0000:c3:11.1");
-  dpdk_iova_mode = "VA";
-  system_core = 0;
-  io_core = 1;
-  worker_cores = (2);
-  ru_addr = ("00:E0:0C:00:AE:06", "00:E0:0C:00:AE:06");
-  mtu = 9000;
-  fh_config = ({
-    T1a_cp_dl = (285, 470);
-    T1a_cp_ul = (285, 429);
-    T1a_up = (125, 350);
-    Ta4 = (110, 180);
-    ru_config = {
-      iq_width = 9;
-      iq_width_prach = 9;
-    };
-  });
-};
-

ci-scripts/conf_files/gnb.sa.band77.273prb.usrpn310.2x2.conf

@@ -91,8 +91,8 @@ gNBs = (
           ra_ResponseWindow                             = 4;
           # ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
           # 1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-          ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR  = 4;
-          # one (0..15) 4,8,12,16,...60,64
+          ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR  = 3;
+          # oneHalf (0..15) 4,8,12,16,...60,64
           ssb_perRACH_OccasionAndCB_PreamblesPerSSB     = 15;
           # ra_ContentionResolutionTimer
           # (0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.106prb.n310.7ds2u.conf

@@ -26,6 +26,14 @@ gNBs =
     pdsch_AntennaPorts_XP                                     = 1;
     pusch_AntennaPorts                                        = 1;
 
+
+    pdcch_ConfigSIB1 = (
+      {
+        controlResourceSetZero = 12;
+        searchSpaceZero = 0;
+      }
+    );
+
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -89,8 +97,8 @@ gNBs =
         ra_ResponseWindow                                            = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                 = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                 = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                    = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.106prb.rfsim.conf

@@ -91,8 +91,8 @@ gNBs =
         ra_ResponseWindow                                           = 5;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.106prb.rfsim.flexric.conf

@@ -85,8 +85,8 @@ gNBs =
       ra_ResponseWindow                                             = 4;
       #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
       #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-      ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                  = 4;
-      #one (0..15) 4,8,12,16,...60,64
+      ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                  = 3;
+      #oneHalf (0..15) 4,8,12,16,...60,64
       ssb_perRACH_OccasionAndCB_PreamblesPerSSB                     = 15;
       #ra_ContentionResolutionTimer
       #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.106prb.rfsim.neighbour.conf

@@ -21,6 +21,12 @@ gNBs =
     do_CSIRS                                                  = 0;
     do_SRS                                                    = 0;
     min_rxtxtime = 6;
+      pdcch_ConfigSIB1 = (
+      {
+        controlResourceSetZero = 12;
+        searchSpaceZero = 0;
+      }
+      );
 
     servingCellConfigCommon = (
     {
@@ -88,7 +94,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.106prb.rfsim.yaml

@@ -77,8 +77,8 @@ gNBs:
         ra_ResponseWindow: 5
         #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
         #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR: 4
-        #one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR: 3
+        #oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB: 15
         #ra_ContentionResolutionTimer
         #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.106prb.usrp310.2x2.conf

@@ -90,8 +90,8 @@ gNBs =
         ra_ResponseWindow                                           = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.106prb.usrpb200.sc-fdma.conf

@@ -84,7 +84,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64
@@ -193,7 +193,7 @@ RUs = (
   local_rf       = "yes"
   nb_tx          = 1
   nb_rx          = 1
-  att_tx         = 18;
+  att_tx         = 10;
   att_rx         = 10;
   bands          = [78];
   max_pdschReferenceSignalPower = -27;

ci-scripts/conf_files/gnb.sa.band78.106prb.usrpn310.ddsuu-2x2.conf

@@ -103,8 +103,8 @@ gNBs =
         ra_ResponseWindow                                           = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.162prb.usrpn310.2x2.conf

@@ -104,8 +104,8 @@ gNBs =
         ra_ResponseWindow                                           = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.24prb.rfsim.conf

@@ -86,7 +86,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.273prb.fhi72.4x4-benetel550.conf

@@ -26,6 +26,13 @@ gNBs =
     sib1_tda			        = 15;
    # force_UL256qam_off    = 1;
 
+    pdcch_ConfigSIB1 = (
+      {
+        controlResourceSetZero = 11;
+        searchSpaceZero = 0;
+      }
+    );
+
     servingCellConfigCommon = (
     {
  #spCellConfigCommon
@@ -75,7 +82,7 @@ gNBs =
         initialULBWPsubcarrierSpacing                               = 1;
       #rach-ConfigCommon
         #rach-ConfigGeneric
-          prach_ConfigurationIndex                                  = 152;
+          prach_ConfigurationIndex                                  = 151;
 #prach_msg1_FDM
 #0 = one, 1=two, 2=four, 3=eight
           prach_msg1_FDM                                            = 0;
@@ -92,8 +99,8 @@ gNBs =
         ra_ResponseWindow                                           = 5;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.273prb.rfsim.2x2.conf

@@ -88,8 +88,8 @@ gNBs =
         ra_ResponseWindow                                           = 5;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.51prb.aw2s.ddsuu.2x2.conf

@@ -75,7 +75,7 @@ gNBs =
         initialULBWPsubcarrierSpacing                                           = 1;
       #rach-ConfigCommon
         #rach-ConfigGeneric
-          prach_ConfigurationIndex                                  = 101;
+          prach_ConfigurationIndex                                  = 100;
 #prach_msg1_FDM
 #0 = one, 1=two, 2=four, 3=eight
           prach_msg1_FDM                                            = 0;
@@ -92,8 +92,8 @@ gNBs =
         ra_ResponseWindow                                           = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.51prb.aw2s.ddsuu.conf

@@ -75,7 +75,7 @@ gNBs =
         initialULBWPsubcarrierSpacing                                           = 1;
       #rach-ConfigCommon
         #rach-ConfigGeneric
-          prach_ConfigurationIndex                                  = 101;
+          prach_ConfigurationIndex                                  = 100;
 #prach_msg1_FDM
 #0 = one, 1=two, 2=four, 3=eight
           prach_msg1_FDM                                            = 0;
@@ -92,8 +92,8 @@ gNBs =
         ra_ResponseWindow                                           = 4;
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
-        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/gnb.sa.band78.51prb.usrpb200.conf

@@ -26,11 +26,11 @@ gNBs =
 
 #  downlinkConfigCommon
     #frequencyInfoDL
-      # this is 3610.56 MHz
-      absoluteFrequencySSB                                             = 640704;
+      # this is 3300.30 MHz + (19 PRBs + 10 SCs)@30kHz SCS (GSCN: 7715)
+      absoluteFrequencySSB                                             = 620736;
       dl_frequencyBand                                                 = 78;
-      # this is 3599.94 MHz
-      dl_absoluteFrequencyPointA                                       = 639996;
+      # this is 3300.30 MHz
+      dl_absoluteFrequencyPointA                                       = 620020;
       #scs-SpecificCarrierList
         dl_offstToCarrier                                              = 0;
 # subcarrierSpacing
@@ -84,7 +84,7 @@ gNBs =
 #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
 #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
-#one (0..15) 4,8,12,16,...60,64
+#oneHalf (0..15) 4,8,12,16,...60,64
         ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
 #ra_ContentionResolutionTimer
 #(0..7) 8,16,24,32,40,48,56,64

ci-scripts/conf_files/nrue.uicc.conf

@@ -6,12 +6,6 @@ uicc0 = {
   nssai_sst=1;
 }
 
-position0 = {
-    x = 0.0;
-    y = 0.0;
-    z = 6377900.0;
-}
-
 thread-pool = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
 
 #/* configuration for channel modelisation */
@@ -40,4 +34,4 @@ channelmod = {
       ds_tdl         = 0;
     }
   );
-};
+};

ci-scripts/datalog_rt_stats.1x1.60.yaml

@@ -10,7 +10,7 @@ Ref :
   feprx : 46.0
   feptx_prec : 15.0
   feptx_ofdm : 35.0
-  feptx_total : 50.0
+  feptx_total : 57.0
   L1 Tx processing : 260.0
   DLSCH encoding : 160.0
   L1 Rx processing : 420.0

ci-scripts/datalog_rt_stats.default.yaml

@@ -10,7 +10,7 @@ Ref :
   feprx : 43.0
   feptx_prec : 13.0
   feptx_ofdm : 33.0
-  feptx_total : 50.0
+  feptx_total : 55.0
   L1 Tx processing : 200.0
   DLSCH encoding : 100.0
   L1 Rx processing : 330.0

ci-scripts/helpreadme.py

@@ -43,8 +43,6 @@ def GenericHelp(vers):
 	print('      InitiateHtml, FinalizeHtml')
 	print('      TerminateeNB, TerminateHSS, TerminateMME, TerminateSPGW')
 	print('      LogCollectBuild, LogCollecteNB, LogCollectHSS, LogCollectMME, LogCollectSPGW, LogCollectPing, LogCollectIperf')
-	print('  --local Force local execution: rewrites the test xml script before running to always execute on localhost. Assumes')
-	print('          images are available locally, will not remove any images and will run inside the current repo directory')
 
 def GitSrvHelp(repository,branch,commit,mergeallow,targetbranch):
 	print('  --ranRepository=[OAI RAN Repository URL]                                      -- ' + repository)

ci-scripts/main.py

@@ -212,17 +212,13 @@ def ExecuteActionWithParam(action):
 
 	elif action == 'Initialize_UE' or action == 'Attach_UE' or action == 'Detach_UE' or action == 'Terminate_UE' or action == 'CheckStatusUE' or action == 'DataEnable_UE' or action == 'DataDisable_UE':
 		CiTestObj.ue_ids = test.findtext('id').split(' ')
-		if force_local:
-			# Change all execution targets to localhost
-			CiTestObj.nodes = ['localhost'] * len(CiTestObj.ue_ids)
+		if test.findtext('nodes'):
+			CiTestObj.nodes = test.findtext('nodes').split(' ')
+			if len(CiTestObj.ue_ids) != len(CiTestObj.nodes):
+				logging.error('Number of Nodes are not equal to the total number of UEs')
+				sys.exit("Mismatch in number of Nodes and UIs")
 		else:
-			if test.findtext('nodes'):
-				CiTestObj.nodes = test.findtext('nodes').split(' ')
-				if len(CiTestObj.ue_ids) != len(CiTestObj.nodes):
-					logging.error('Number of Nodes are not equal to the total number of UEs')
-					sys.exit("Mismatch in number of Nodes and UIs")
-			else:
-				CiTestObj.nodes = [None] * len(CiTestObj.ue_ids)
+			CiTestObj.nodes = [None] * len(CiTestObj.ue_ids)
 		if action == 'Initialize_UE':
 			success = CiTestObj.InitializeUE(HTML)
 		elif action == 'Attach_UE':
@@ -242,17 +238,13 @@ def ExecuteActionWithParam(action):
 		CiTestObj.ping_args = test.findtext('ping_args')
 		CiTestObj.ping_packetloss_threshold = test.findtext('ping_packetloss_threshold')
 		CiTestObj.ue_ids = test.findtext('id').split(' ')
-		if force_local:
-			# Change all execution targets to localhost
-			CiTestObj.nodes = ['localhost'] * len(CiTestObj.ue_ids)
+		if test.findtext('nodes'):
+			CiTestObj.nodes = test.findtext('nodes').split(' ')
+			if len(CiTestObj.ue_ids) != len(CiTestObj.nodes):
+				logging.error('Number of Nodes are not equal to the total number of UEs')
+				sys.exit("Mismatch in number of Nodes and UIs")
 		else:
-			if test.findtext('nodes'):
-				CiTestObj.nodes = test.findtext('nodes').split(' ')
-				if len(CiTestObj.ue_ids) != len(CiTestObj.nodes):
-					logging.error('Number of Nodes are not equal to the total number of UEs')
-					sys.exit("Mismatch in number of Nodes and UIs")
-			else:
-				CiTestObj.nodes = [None] * len(CiTestObj.ue_ids)
+			CiTestObj.nodes = [None] * len(CiTestObj.ue_ids)
 		ping_rttavg_threshold = test.findtext('ping_rttavg_threshold') or ''
 		success = CiTestObj.Ping(HTML,EPC,CONTAINERS)
 
@@ -260,19 +252,15 @@ def ExecuteActionWithParam(action):
 		CiTestObj.iperf_args = test.findtext('iperf_args')
 		CiTestObj.ue_ids = test.findtext('id').split(' ')
 		CiTestObj.svr_id = test.findtext('svr_id') or None
-		if force_local:
-			# Change all execution targets to localhost
-			CiTestObj.nodes = ['localhost'] * len(CiTestObj.ue_ids)
+		if test.findtext('nodes'):
+			CiTestObj.nodes = test.findtext('nodes').split(' ')
+			if len(CiTestObj.ue_ids) != len(CiTestObj.nodes):
+				logging.error('Number of Nodes are not equal to the total number of UEs')
+				sys.exit("Mismatch in number of Nodes and UIs")
 		else:
-			if test.findtext('nodes'):
-				CiTestObj.nodes = test.findtext('nodes').split(' ')
-				if len(CiTestObj.ue_ids) != len(CiTestObj.nodes):
-					logging.error('Number of Nodes are not equal to the total number of UEs')
-					sys.exit("Mismatch in number of Nodes and UIs")
-			else:
-				CiTestObj.nodes = [None] * len(CiTestObj.ue_ids)
+			CiTestObj.nodes = [None] * len(CiTestObj.ue_ids)
 		if test.findtext('svr_node'):
-			CiTestObj.svr_node = test.findtext('svr_node') if not force_local else 'localhost'
+			CiTestObj.svr_node = test.findtext('svr_node')
 		CiTestObj.iperf_packetloss_threshold = test.findtext('iperf_packetloss_threshold')
 		CiTestObj.iperf_bitrate_threshold = test.findtext('iperf_bitrate_threshold') or '90'
 		CiTestObj.iperf_profile = test.findtext('iperf_profile') or 'balanced'
@@ -368,9 +356,6 @@ def ExecuteActionWithParam(action):
 		elif action == 'Undeploy_Object':
 			success = CONTAINERS.UndeployObject(HTML, RAN)
 		elif action == 'Create_Workspace':
-			if force_local:
-				# Do not create a working directory when running locally. Current repo directory will be used
-				return True
 			success = CONTAINERS.Create_Workspace(HTML)
 
 	elif action == 'Run_Physim':
@@ -390,9 +375,6 @@ def ExecuteActionWithParam(action):
 		success = CONTAINERS.Push_Image_to_Local_Registry(HTML, svr_id)
 
 	elif action == 'Pull_Local_Registry' or action == 'Clean_Test_Server_Images':
-		if force_local:
-			# Do not pull or remove images when running locally. User is supposed to handle image creation & cleanup
-			return True
 		svr_id = test.findtext('svr_id')
 		images = test.findtext('images').split()
 		# hack: for FlexRIC, we need to overwrite the tag to use
@@ -481,9 +463,7 @@ CLUSTER = cls_cluster.Cluster()
 #-----------------------------------------------------------
 
 import args_parse
-# Force local execution, move all execution targets to localhost
-force_local = False
-py_param_file_present, py_params, mode, force_local = args_parse.ArgsParse(sys.argv,CiTestObj,RAN,HTML,EPC,CONTAINERS,HELP,SCA,PHYSIM,CLUSTER)
+py_param_file_present, py_params, mode = args_parse.ArgsParse(sys.argv,CiTestObj,RAN,HTML,EPC,CONTAINERS,HELP,SCA,PHYSIM,CLUSTER)
 
 
 

ci-scripts/run_locally.sh

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-set -e
-SHORT_COMMIT_SHA=$(git rev-parse --short=8 HEAD)
-COMMIT_SHA=$(git rev-parse HEAD)
-CURRENT_BRANCH=$(git rev-parse --abbrev-ref HEAD)
-REPO_PATH=$(dirname $(realpath $0))/../
-TESTCASE=$1
-
-if [ $# -eq 0 ]
-  then
-    echo "Provide a testcase as an argument"
-    exit 1
-fi
-
-# The script assumes you've build the following images:
-#
-# docker build . -f docker/Dockerfile.gNB.ubuntu22 -t oai-gnb
-# docker build . -f docker/Dockerfile.nrUE.ubuntu22 -t oai-nr-ue
-#
-# The images above depend on the following images:
-#
-# docker build . -f docker/Dockerfile.build.ubuntu22 -t ran-build
-# dokcer build . -f docker/Dockerfile.base.ubuntu22 -t ran-base
-
-docker tag oai-nr-ue oai-ci/oai-nr-ue:develop-${SHORT_COMMIT_SHA}
-docker tag oai-gnb oai-ci/oai-gnb:develop-${SHORT_COMMIT_SHA}
-
-python3 main.py --mode=TesteNB --ranRepository=NONE --ranBranch=${CURRENT_BRANCH} \
-    --ranCommitID=${COMMIT_SHA} --ranAllowMerge=false \
-    --ranTargetBranch=NONE --eNBIPAddress=NONE --eNBUserName=NONE --eNBPassword=NONE \
-    --eNBSourceCodePath=NONE --EPCIPAddress=NONE --EPCType=OAI --eNBPassword=NONE \
-    --eNBSourceCodePath=${REPO_PATH} --EPCIPAddress=NONE \
-    --EPCUserName=NONE --EPCPassword=NONE  --EPCSourceCodePath=NONE \
-    --XMLTestFile=xml_files/${TESTCASE} --local

ci-scripts/xml_files/container_5g_flexric_rfsim.xml

@@ -133,7 +133,7 @@
                 <class>Ping</class>
                 <desc>Ping ext-dn from both UEs</desc>
                 <id>rfsim5g_ue rfsim5g_ue2</id>
-                <nodes>carabe carabe</nodes>
+                <nodes>selfix selfix</nodes>
                 <ping_args>-c 20 192.168.70.135</ping_args>
                 <ping_packetloss_threshold>5</ping_packetloss_threshold>
         </testCase>
@@ -142,14 +142,14 @@
                 <class>Attach_UE</class>
                 <desc>Attach OAI UE 1 and 2</desc>
                 <id>rfsim5g_ue rfsim5g_ue2</id>
-                <nodes>carabe carabe</nodes>
+                <nodes>selfix selfix</nodes>
         </testCase>
 
         <testCase id="444444">
                 <class>Detach_UE</class>
                 <desc>Detach OAI UE 1 and 2</desc>
                 <id>rfsim5g_ue rfsim5g_ue2</id>
-                <nodes>carabe carabe</nodes>
+                <nodes>selfix selfix</nodes>
         </testCase>
 
         <testCase id="100001">

ci-scripts/xml_files/container_5g_rfsim_u0_25prb.xml

@@ -22,7 +22,7 @@
 -->
 <testCaseList>
         <htmlTabRef>rfsim-5gnr-fdd-u0-25prb</htmlTabRef>
-        <htmlTabName>VNF-PNF nFAPI FDD u0 25PRB gNB</htmlTabName>
+        <htmlTabName>Monolithic SA FDD u0 25PRB gNB</htmlTabName>
         <htmlTabIcon>wrench</htmlTabIcon>
         <TestCaseRequestedList>
  111111
@@ -62,9 +62,9 @@
 
         <testCase id="000002">
                 <class>Deploy_Object</class>
-                <desc>Deploy OAI 5G VNF+PNF+nrUE RF sim SA</desc>
+                <desc>Deploy OAI 5G gNB+nrUE RF sim SA</desc>
                 <yaml_path>ci-scripts/yaml_files/5g_rfsimulator_u0_25prb</yaml_path>
-                <services>oai-vnf oai-pnf oai-nr-ue</services>
+                <services>oai-gnb oai-nr-ue</services>
                 <eNB_instance>0</eNB_instance>
                 <eNB_serverId>0</eNB_serverId>
         </testCase>
@@ -122,7 +122,6 @@
                 <class>Undeploy_Object</class>
                 <always_exec>true</always_exec>
                 <desc>Undeploy all OAI 5G stack</desc>
-                <services>oai-vnf oai-pnf</services>
                 <yaml_path>ci-scripts/yaml_files/5g_rfsimulator_u0_25prb</yaml_path>
                 <d_retx_th>1,0,0,0</d_retx_th>
                 <u_retx_th>1,0,0,0</u_retx_th>

ci-scripts/xml_files/container_sa_fhi72_metanoia_up2_2x2.xml

@@ -1,171 +0,0 @@
-<!--
-
- Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The OpenAirInterface Software Alliance licenses this file to You under
- the OAI Public License, Version 1.1  (the "License"); you may not use this file
- except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.openairinterface.org/?page_id=698
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
- For more information about the OpenAirInterface (OAI) Software Alliance:
-      contact@openairinterface.org
-
--->
-<testCaseList>
-  <htmlTabRef>test-5g-fhi72-metanoia-2x2</htmlTabRef>
-  <htmlTabName>100 MHz TDD SA METANOIA</htmlTabName>
-  <htmlTabIcon>tasks</htmlTabIcon>
-  <TestCaseRequestedList>
-    200000
-    110000
-    800813
-    120000
-    102000
-    102001
-    100100
-    100010
-    100020
-    100030
-    100040
-    103000
-    100002
-    130000
-    777777
-    888888
-  </TestCaseRequestedList>
-  <TestCaseExclusionList></TestCaseExclusionList>
-
-  <testCase id="200000">
-    <class>Custom_Script</class>
-    <desc>Setup sriov and network interfaces Metanoia</desc>
-    <node>cacofonix</node>
-    <script>yaml_files/sa_fhi_7.2_metanoia_2x2_gnb/setup_sriov_metanoia.sh</script>
-    <command_fail>yes</command_fail>
-  </testCase>
-
-  <testCase id="110000">
-    <class>Pull_Local_Registry</class>
-    <desc>Pull Images from Local Registry</desc>
-    <svr_id>0</svr_id>
-    <images>oai-gnb-fhi72</images>
-  </testCase>
-
-  <testCase id="800813">
-    <class>Create_Workspace</class>
-    <desc>Create new Workspace for server 0</desc>
-    <eNB_instance>0</eNB_instance>
-    <eNB_serverId>0</eNB_serverId>
-  </testCase>
-
-  <testCase id="120000">
-    <class>Deploy_Object</class>
-    <desc>Deploy gNB (TDD/Band78/100MHz/Metanoia) in a container</desc>
-    <yaml_path>ci-scripts/yaml_files/sa_fhi_7.2_metanoia_2x2_gnb</yaml_path>
-    <eNB_instance>0</eNB_instance>
-    <eNB_serverId>0</eNB_serverId>
-  </testCase>
-
-  <testCase id="102001">
-    <class>Attach_UE</class>
-    <desc>Attach UE</desc>
-    <id>up2-fhi72</id>
-  </testCase>
-
-  <testCase id="100100">
-    <class>Ping</class>
-    <desc>Ping: 100 pings in 10 sec</desc>
-    <id>up2-fhi72</id>
-    <ping_args>-c 100 -i 0.1 172.21.6.104</ping_args>
-    <ping_packetloss_threshold>1</ping_packetloss_threshold>
-    <ping_rttavg_threshold>15</ping_rttavg_threshold>
-  </testCase>
-
-  <testCase id="100010">
-    <class>Iperf</class>
-    <desc>iperf (DL/570Mbps/UDP)(30 sec)(multi-ue profile)</desc>
-    <iperf_args>-u -b 570M -t 30 -R</iperf_args>
-    <id>up2-fhi72</id>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>80</iperf_bitrate_threshold>
-    <iperf_profile>balanced</iperf_profile>
-    <svr_id>oc-cn5g-20897</svr_id>
-  </testCase>
-
-  <testCase id="100030">
-    <class>Iperf</class>
-    <desc>iperf (DL/TCP)(30 sec)(multi-ue profile)</desc>
-    <iperf_args>-t 30 -R</iperf_args>
-    <id>up2-fhi72</id>
-    <iperf_tcp_rate_target>80</iperf_tcp_rate_target>
-    <svr_id>oc-cn5g-20897</svr_id>
-  </testCase>
-
-  <testCase id="100020">
-    <class>Iperf</class>
-    <desc>iperf (UL/100Mbps/UDP)(30 sec)(multi-ue profile)</desc>
-    <iperf_args>-u -b 100M -t 30</iperf_args>
-    <id>up2-fhi72</id>
-    <iperf_packetloss_threshold>20</iperf_packetloss_threshold>
-    <iperf_bitrate_threshold>80</iperf_bitrate_threshold>
-    <iperf_profile>balanced</iperf_profile>
-    <svr_id>oc-cn5g-20897</svr_id>
-  </testCase>
-
-  <testCase id="100040">
-    <class>Iperf</class>
-    <desc>iperf (UL/TCP)(30 sec)(multi-ue profile)</desc>
-    <iperf_args>-t 30</iperf_args>
-    <id>up2-fhi72</id>
-    <iperf_tcp_rate_target>80</iperf_tcp_rate_target>
-    <svr_id>oc-cn5g-20897</svr_id>
-  </testCase>
-
-  <testCase id="103000">
-    <class>Detach_UE</class>
-    <always_exec>true</always_exec>
-    <desc>Detach UE</desc>
-    <id>up2-fhi72</id>
-  </testCase>
-
-  <testCase id="100002">
-    <class>IdleSleep</class>
-    <desc>Sleep</desc>
-    <idle_sleep_time_in_sec>5</idle_sleep_time_in_sec>
-  </testCase>
-
-  <testCase id="130000">
-    <class>Undeploy_Object</class>
-    <always_exec>true</always_exec>
-    <desc>Undeploy gNB</desc>
-    <yaml_path>ci-scripts/yaml_files/sa_fhi_7.2_metanoia_2x2_gnb</yaml_path>
-    <eNB_instance>0</eNB_instance>
-    <eNB_serverId>0</eNB_serverId>
-  </testCase>
-
-  <testCase id="777777">
-    <class>Clean_Test_Server_Images</class>
-    <always_exec>true</always_exec>
-    <desc>Clean Test Images on Test Server</desc>
-    <svr_id>0</svr_id>
-    <images>oai-gnb-fhi72</images>
-  </testCase>
-
-  <testCase id="888888">
-    <class>Custom_Script</class>
-    <always_exec>true</always_exec>
-    <desc>Set CPU to idle state, set kernel parameters to default values</desc>
-    <node>cacofonix</node>
-    <script>yaml_files/sa_fhi_7.2_metanoia_2x2_gnb/setup_cleanup.sh</script>
-    <command_fail>yes</command_fail>
-  </testCase>
-
-</testCaseList>

ci-scripts/xml_files/container_sa_n310_4X4_60MHz_quectel.xml

@@ -22,7 +22,7 @@
 -->
 <testCaseList>
   <htmlTabRef>TEST-SA-FR1-N310-4x4-60MHz</htmlTabRef>
-  <htmlTabName>nFAPI 60 MHz 4x4 TDD SA</htmlTabName>
+  <htmlTabName>60 MHz 4x4 TDD SA</htmlTabName>
   <htmlTabIcon>tasks</htmlTabIcon>
   <TestCaseRequestedList>
     100000
@@ -85,7 +85,7 @@
   </testCase>
   <testCase id="030101">
       <class>Deploy_Object</class>
-      <desc>Deploy VNF-PNF (TDD/Band77/60MHz/N310) in a container</desc>
+      <desc>Deploy gNB (TDD/Band77/60MHz/N310) in a container</desc>
       <yaml_path>ci-scripts/yaml_files/5g_sa_n310_4x4_60MHz</yaml_path>
       <eNB_instance>0</eNB_instance>
       <eNB_serverId>0</eNB_serverId>
@@ -144,11 +144,11 @@
   <testCase id="030201">
     <class>Undeploy_Object</class>
     <always_exec>true</always_exec>
-    <desc>Undeploy VNF-PNF</desc>
+    <desc>Undeploy gNB</desc>
     <yaml_path>ci-scripts/yaml_files/5g_sa_n310_4x4_60MHz</yaml_path>
     <eNB_instance>0</eNB_instance>
     <eNB_serverId>0</eNB_serverId>
-    <services>oai-vnf oai-pnf</services>
+    <services>oai-gnb</services>
     <d_retx_th>10,100,100,100</d_retx_th>
     <u_retx_th>10,100,100,100</u_retx_th>
   </testCase>

ci-scripts/xml_files/t2_offload_dec_nr_ulsim.xml

@@ -24,36 +24,19 @@
 	<htmlTabName>Test T2 Offload Decoder</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
         <TestCaseRequestedList>
-                010204
                 010111 010112 010121 010122 010131 010132
                 010211 010212 010221 010222 010231 010232
                 010311 010312 010321 010322 010331 010332
-                402010
         </TestCaseRequestedList>
 	<TestCaseExclusionList></TestCaseExclusionList>
 
-	<testCase id="010204">
-		<class>Custom_Command</class>
-		<desc>Disable Sleep States</desc>
-		<node>caracal</node>
-		<command>sudo cpupower idle-set -D 0</command>
-	</testCase>
-
-	<testCase id="402010">
-		<class>Custom_Command</class>
-		<always_exec>true</always_exec>
-		<desc>Enable Sleep States</desc>
-		<node>caracal</node>
-		<command>sudo cpupower idle-set -E</command>
-	</testCase>
-
 	<testCase id="010111">
 		<class>Run_Physim</class>
 		<desc>Run nr_ulsim with CPU: SNR = 30, MCS = 5, 106 PRBs, 1 layer</desc>
 		<always_exec>true</always_exec>
 	        <physim_test>nr_ulsim</physim_test>
 	        <physim_time_threshold>300</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -m5 -r106 -R106 -C10 -P</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -m5 -r106 -R106 -C10 -P</physim_run_args>
 	</testCase>
 
 	<testCase id="010112">
@@ -62,7 +45,7 @@
 		<always_exec>true</always_exec>
 		<physim_test>nr_ulsim</physim_test>
 		<physim_time_threshold>100</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -m5 -r106 -R106 -C10 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -m5 -r106 -R106 -C10 -o -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
 	</testCase>
 
 	<testCase id="010121">
@@ -71,7 +54,7 @@
 		<always_exec>true</always_exec>
 		<physim_test>nr_ulsim</physim_test>
 		<physim_time_threshold>300</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -m15 -r106 -R106 -C10 -P</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -m15 -r106 -R106 -C10 -P</physim_run_args>
 	</testCase>
 
 	<testCase id="010122">
@@ -80,7 +63,7 @@
 		<always_exec>true</always_exec>
 		<physim_test>nr_ulsim</physim_test>
 		<physim_time_threshold>150</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -m15 -r106 -R106 -C10 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -m15 -r106 -R106 -C10 -o -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
 	</testCase>
 
 	<testCase id="010131">
@@ -89,7 +72,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>250</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m25 -r106 -R106 -C10 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m25 -r106 -R106 -C10 -P</physim_run_args>
         </testCase>
 
         <testCase id="010132">
@@ -98,7 +81,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>250</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m25 -r106 -R106 -C10 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m25 -r106 -R106 -C10 -o -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="010211">
@@ -107,7 +90,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>300</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m5 -r273 -R273 -C10 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m5 -r273 -R273 -C10 -P</physim_run_args>
         </testCase>
 
         <testCase id="010212">
@@ -116,7 +99,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>150</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m5 -r273 -R273 -C10 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m5 -r273 -R273 -C10 -o -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
 	</testCase>
 
 	<testCase id="010221">
@@ -125,7 +108,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>400</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m15 -r273 -R273 -C10 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m15 -r273 -R273 -C10 -P</physim_run_args>
         </testCase>
 
         <testCase id="010222">
@@ -134,7 +117,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>350</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m15 -r273 -R273 -C10 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m15 -r273 -R273 -C10 -o -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="010231">
@@ -143,7 +126,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>400</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m25 -r273 -R273 -C10 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m25 -r273 -R273 -C10 -P</physim_run_args>
         </testCase>
 
         <testCase id="010232">
@@ -152,7 +135,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>550</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m25 -r273 -R273 -C10 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m25 -r273 -R273 -C10 -o -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="010311">
@@ -161,7 +144,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>300</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m5 -r273 -R273 -C10 -W2 -z2 -y2 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m5 -r273 -R273 -C10 -W2 -z2 -y2 -P</physim_run_args>
         </testCase>
 
         <testCase id="010312">
@@ -170,7 +153,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>250</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m5 -r273 -R273 -C10 -W2 -z2 -y2 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m5 -r273 -R273 -C10 -o -W2 -z2 -y2 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="010321">
@@ -179,7 +162,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>600</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m15 -r273 -R273 -C10 -W2 -z2 -y2 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m15 -r273 -R273 -C10 -W2 -z2 -y2 -P</physim_run_args>
         </testCase>
 
         <testCase id="010322">
@@ -188,7 +171,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>650</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m15 -r273 -R273 -C10 -W2 -z2 -y2 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m15 -r273 -R273 -C10 -o -W2 -z2 -y2 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="010331">
@@ -197,7 +180,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>650</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m25 -r273 -R273 -C10 -W2 -z2 -y2 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m25 -r273 -R273 -C10 -W2 -z2 -y2 -P</physim_run_args>
         </testCase>
 
         <testCase id="010332">
@@ -206,7 +189,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_ulsim</physim_test>
                 <physim_time_threshold>1100</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -m25 -r273 -R273 -C10 -W2 -z2 -y2 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -m25 -r273 -R273 -C10 -o -W2 -z2 -y2 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
 </testCaseList>

ci-scripts/xml_files/t2_offload_enc_nr_dlsim.xml

@@ -24,37 +24,20 @@
 	<htmlTabName>Test T2 Offload Encoder</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
         <TestCaseRequestedList>
-                102040
                 000111 000112 000121 000122 000131 000132
                 000211 000212 000221 000222 000231 000232
                 000311 000312 000321 000322 000331 000332
                 000411 000412 000421 000422 000431 000432
-                040201
         </TestCaseRequestedList>
 	<TestCaseExclusionList></TestCaseExclusionList>
 
-	<testCase id="102040">
-		<class>Custom_Command</class>
-		<desc>Disable Sleep States</desc>
-		<node>caracal</node>
-		<command>sudo cpupower idle-set -D 0</command>
-	</testCase>
-
-	<testCase id="040201">
-		<class>Custom_Command</class>
-		<always_exec>true</always_exec>
-		<desc>Enable Sleep States</desc>
-		<node>caracal</node>
-		<command>sudo cpupower idle-set -E</command>
-	</testCase>
-
 	<testCase id="000111">
 		<class>Run_Physim</class>
 		<desc>Run nr_dlsim with CPU: SNR = 30, MCS = 5, 106 PRBs, 1 layer</desc>
 		<always_exec>true</always_exec>
 		<physim_test>nr_dlsim</physim_test>
 		<physim_time_threshold>230</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -e5 -b106 -R106 -X 8,9,10,11,12 -P</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -e5 -b106 -R106 -X 8,9,10,11,12 -P</physim_run_args>
 	</testCase>
 
 	<testCase id="000112">
@@ -63,7 +46,7 @@
 		<always_exec>true</always_exec>
 		<physim_test>nr_dlsim</physim_test>
 		<physim_time_threshold>100</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -e5 -b106 -R106 -X4,5,6,7,8,9 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -e5 -b106 -R106 -c -X4,5,6,7,8,9 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
 	</testCase>
 
 	<testCase id="000121">
@@ -72,7 +55,7 @@
 		<always_exec>true</always_exec>
 		<physim_test>nr_dlsim</physim_test>
 		<physim_time_threshold>300</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -e15 -b106 -R106 -X 8,9,10,11,12 -P</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -e15 -b106 -R106 -X 8,9,10,11,12 -P</physim_run_args>
 	</testCase>
 
 	<testCase id="000122">
@@ -81,7 +64,7 @@
 		<always_exec>true</always_exec>
 		<physim_test>nr_dlsim</physim_test>
 		<physim_time_threshold>100</physim_time_threshold>
-		<physim_run_args>-n1000 -s30 -S30.2 -e15 -b106 -R106 -X4,5,6,7,8,9 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+		<physim_run_args>-n100 -s30 -S30.2 -e15 -b106 -R106 -c -X4,5,6,7,8,9 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
 	</testCase>
 
 	<testCase id="000131">
@@ -90,7 +73,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>350</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b106 -R106 -X 8,9,10,11,12 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b106 -R106 -X 8,9,10,11,12 -P</physim_run_args>
         </testCase>
 
         <testCase id="000132">
@@ -99,7 +82,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>200</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b106 -R106 -X4,5,6,7,8,9 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b106 -R106 -c -X4,5,6,7,8,9 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000211">
@@ -108,7 +91,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>300</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e5 -b273 -R273 -X 8,9,10,11,12 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e5 -b273 -R273 -X 8,9,10,11,12 -P</physim_run_args>
         </testCase>
 
         <testCase id="000212">
@@ -117,7 +100,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>150</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e5 -b273 -R273 -X4,5,6,7,8,9 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e5 -b273 -R273 -c -X4,5,6,7,8,9 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
 	</testCase>
 
 	<testCase id="000221">
@@ -126,7 +109,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>350</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e15 -b273 -R273 -X 8,9,10,11,12 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e15 -b273 -R273 -X 8,9,10,11,12 -P</physim_run_args>
         </testCase>
 
         <testCase id="000222">
@@ -135,7 +118,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>250</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e15 -b273 -R273 -X4,5,6,7,8,9 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e15 -b273 -R273 -c -X4,5,6,7,8,9 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000231">
@@ -144,7 +127,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>400</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b273 -R273 -X 8,9,10,11,12 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b273 -R273 -X 8,9,10,11,12 -P</physim_run_args>
         </testCase>
 
         <testCase id="000232">
@@ -153,7 +136,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>400</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b273 -R273 -X4,5,6,7,8,9 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b273 -R273 -c -X4,5,6,7,8,9 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000311">
@@ -162,7 +145,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>400</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e5 -b273 -R273 -X 8,9,10,11,12 -x2 -z2 -y2 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e5 -b273 -R273 -X 8,9,10,11,12 -x2 -z2 -y2 -P</physim_run_args>
         </testCase>
 
         <testCase id="000312">
@@ -171,7 +154,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>200</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e5 -b273 -R273 -X4,5,6,7,8,9 -x2 -z2 -y2 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e5 -b273 -R273 -c -X4,5,6,7,8,9 -x2 -z2 -y2 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000321">
@@ -180,7 +163,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>450</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e15 -b273 -R273 -X 8,9,10,11,12 -x2 -z2 -y2 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e15 -b273 -R273 -X 8,9,10,11,12 -x2 -z2 -y2 -P</physim_run_args>
         </testCase>
 
         <testCase id="000322">
@@ -189,7 +172,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>500</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e15 -b273 -R273 -X4,5,6,7,8,9 -x2 -z2 -y2 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e15 -b273 -R273 -c -X4,5,6,7,8,9 -x2 -z2 -y2 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000331">
@@ -198,7 +181,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>500</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b273 -R273 -X 8,9,10,11,12 -x2 -z2 -y2 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b273 -R273 -X 8,9,10,11,12 -x2 -z2 -y2 -P</physim_run_args>
         </testCase>
 
         <testCase id="000332">
@@ -207,7 +190,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>500</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b273 -R273 -X4,5,6,7,8,9 -x2 -z2 -y2 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b273 -R273 -c -X4,5,6,7,8,9 -x2 -z2 -y2 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000411">
@@ -216,7 +199,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>400</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e5 -b273 -R273 -X8,9,10,11,12 -x2 -z4 -y4 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e5 -b273 -R273 -X8,9,10,11,12 -x2 -z4 -y4 -P</physim_run_args>
         </testCase>
 
         <testCase id="000412">
@@ -225,7 +208,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>200</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e5 -b273 -R273 -X4,5,6,7,8,9 -x2 -z4 -y4 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e5 -b273 -R273 -c -X4,5,6,7,8,9 -x2 -z4 -y4 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000421">
@@ -234,7 +217,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>400</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e15 -b273 -R273 -X8,9,10,11,12 -x2 -z4 -y4 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e15 -b273 -R273 -X8,9,10,11,12 -x2 -z4 -y4 -P</physim_run_args>
         </testCase>
 
         <testCase id="000422">
@@ -243,7 +226,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>300</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e15 -b273 -R273 -X4,5,6,7,8,9 -x2 -z4 -y4 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e15 -b273 -R273 -c -X4,5,6,7,8,9 -x2 -z4 -y4 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 
         <testCase id="000431">
@@ -252,7 +235,7 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>450</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b273 -R273 -X8,9,10,11,12 -x2 -z4 -y4 -P</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b273 -R273 -X8,9,10,11,12 -x2 -z4 -y4 -P</physim_run_args>
         </testCase>
 
         <testCase id="000432">
@@ -261,6 +244,6 @@
                 <always_exec>true</always_exec>
                 <physim_test>nr_dlsim</physim_test>
                 <physim_time_threshold>450</physim_time_threshold>
-                <physim_run_args>-n1000 -s30 -S30.2 -e25 -b273 -R273 -X4,5,6,7,8,9 -x2 -z4 -y4 -P --loader.ldpc.shlibversion _t2 --nrLDPC_coding_t2.dpdk_dev d8:00.0 --nrLDPC_coding_t2.dpdk_core_list 11-12</physim_run_args>
+                <physim_run_args>-n100 -s30 -S30.2 -e25 -b273 -R273 -c -X4,5,6,7,8,9 -x2 -z4 -y4 -P --ldpc_offload.dpdk_dev d8:00.0</physim_run_args>
         </testCase>
 </testCaseList>

ci-scripts/yaml_files/5g_rfsimulator_ntn_geo/docker-compose.yaml

@@ -110,7 +110,7 @@ services:
             - NET_ADMIN  # for interface bringup
             - NET_RAW    # for ping
         environment:
-            USE_ADDITIONAL_OPTIONS: --band 66 -C 2152680000 --CO -400000000 -r 25 --numerology 0 --ssb 48 --rfsim --rfsimulator.prop_delay 238.74 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
+            USE_ADDITIONAL_OPTIONS: --band 66 -C 2152680000 --CO -400000000 -r 25 --numerology 0 --ssb 48 --rfsim --rfsimulator.prop_delay 238.74 --ntn-koffset 478 --ntn-ta-common 477.48 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
         depends_on:
             - oai-gnb
         networks:

ci-scripts/yaml_files/5g_rfsimulator_u0_25prb/docker-compose.yaml

@@ -80,15 +80,13 @@ services:
             interval: 10s
             timeout: 5s
             retries: 5
-
-    oai-vnf:
+    oai-gnb:
         image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
-        container_name: rfsim5g-oai-vnf
+        container_name: rfsim5g-oai-gnb
         cap_drop:
             - ALL
         environment:
-            USE_ADDITIONAL_OPTIONS: --nfapi VNF --log_config.global_log_options level,nocolor,time
-            NFAPI_TRACE_LEVEL: info
+            USE_ADDITIONAL_OPTIONS: --rfsim --log_config.global_log_options level,nocolor,time
             ASAN_OPTIONS: detect_leaks=0
         depends_on:
             - oai-ext-dn
@@ -96,29 +94,7 @@ services:
             public_net:
                 ipv4_address: 192.168.71.140
         volumes:
-            - ../../conf_files/gnb-vnf.sa.band66.u0.25prb.nfapi.conf:/opt/oai-gnb/etc/gnb.conf
-        healthcheck:
-            test: /bin/bash -c "pgrep nr-softmodem"
-            interval: 10s
-            timeout: 5s
-            retries: 5
-
-    oai-pnf:
-        image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
-        container_name: rfsim5g-oai-pnf
-        cap_drop:
-            - ALL
-        environment:
-            USE_ADDITIONAL_OPTIONS: --nfapi PNF --rfsim --log_config.global_log_options level,nocolor,time
-            NFAPI_TRACE_LEVEL: info
-            ASAN_OPTIONS: detect_leaks=0
-        depends_on:
-            - oai-vnf
-        networks:
-            public_net:
-                ipv4_address: 192.168.71.141
-        volumes:
-            - ../../conf_files/gnb-pnf.band66.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
+            - ../../conf_files/gnb.sa.band66.u0.25prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
         healthcheck:
             test: /bin/bash -c "pgrep nr-softmodem"
             interval: 10s
@@ -134,9 +110,9 @@ services:
             - NET_ADMIN  # for interface bringup
             - NET_RAW    # for ping
         environment:
-            USE_ADDITIONAL_OPTIONS: --rfsim -r 25 --numerology 0 --uicc0.imsi 208990100001100 --band 66 -C 2152680000 --CO -400000000 --ssb 48 --rfsimulator.serveraddr 192.168.71.141 --log_config.global_log_options level,nocolor,time
+            USE_ADDITIONAL_OPTIONS: --rfsim -r 25 --numerology 0 --uicc0.imsi 208990100001100 --band 66 -C 2152680000 --CO -400000000 --ssb 48 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
         depends_on:
-            - oai-pnf
+            - oai-gnb
         networks:
             public_net:
                 ipv4_address: 192.168.71.150

ci-scripts/yaml_files/5g_sa_n310_4x4_60MHz/docker-compose.yml

@@ -1,8 +1,8 @@
 services:
-    oai-vnf:
+    oai-gnb:
         image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
         network_mode: "host"
-        container_name: oai-vnf
+        container_name: oai-gnb
         cap_drop:
             - ALL
         cap_add:
@@ -10,30 +10,9 @@ services:
             - IPC_LOCK
         environment:
             TZ: Europe/Paris
-            USE_ADDITIONAL_OPTIONS: --nfapi VNF
-            NFAPI_TRACE_LEVEL: info
+            USE_ADDITIONAL_OPTIONS: --log_config.global_log_options level,nocolor,time
         volumes:
-            - ../../conf_files/gnb-vnf.sa.band77.162prb.nfapi.4x4.conf:/opt/oai-gnb/etc/gnb.conf
-        healthcheck:
-            test: /bin/bash -c "pgrep nr-softmodem"
-            interval: 10s
-            timeout: 5s
-            retries: 5
-    oai-pnf:
-        image: ${REGISTRY:-oaisoftwarealliance}/${GNB_IMG:-oai-gnb}:${TAG:-develop}
-        network_mode: "host"
-        container_name: oai-pnf
-        cap_drop:
-            - ALL
-        cap_add:
-            - SYS_NICE
-            - IPC_LOCK
-        environment:
-            TZ: Europe/Paris
-            USE_ADDITIONAL_OPTIONS: --nfapi PNF
-            NFAPI_TRACE_LEVEL: info
-        volumes:
-            - ../../conf_files/gnb-pnf.band77.usrpn310.4x4.conf:/opt/oai-gnb/etc/gnb.conf
+            - ../../conf_files/gnb.sa.band77.162prb.usrpn310.4x4.conf:/opt/oai-gnb/etc/gnb.conf
         healthcheck:
             test: /bin/bash -c "pgrep nr-softmodem"
             interval: 10s

ci-scripts/yaml_files/sa_fhi_7.2_metanoia_2x2_gnb/README.md

@@ -1,87 +0,0 @@
-<table style="border-collapse: collapse; border: none;">
-  <tr style="border-collapse: collapse; border: none;">
-    <td style="border-collapse: collapse; border: none;">
-      <a href="http://www.openairinterface.org/">
-         <img src="../../../doc/images/oai_final_logo.png" alt="" border=3 height=50 width=150>
-         </img>
-      </a>
-    </td>
-    <td style="border-collapse: collapse; border: none; vertical-align: center;">
-      <b><font size = "5">OAI O-RAN 7.2 Front-haul Docker Compose</font></b>
-    </td>
-  </tr>
-</table>
-
-![Docker deploy 7.2](../../../doc/images/docker-deploy-oai-7-2.png)
-
-This docker-compose is designed to use `OAI-gNB` with a 7.2 compatible Radio Unit. Before using this docker compose you have to configure
-the host machine as per the [ORAN_FHI7.2_Tutorial](../../../doc/ORAN_FHI7.2_Tutorial.md). The container image used by the docker compose file is tested only on `Ubuntu 22.04` and `RHEL 9.4` docker host.
-
-## Build Image (Optional)
-
-Refer to [OAI Docker/Podman Build and Usage Procedures](../../../docker/README.md)
-
-## Configure Networking
-
-### SR-IOV Virtual Functions (VFs)
-
-In docker-compose environment there is no automated method
-to configure the VFs on the fly. The user will have to manually configure
-C/U plane VFs before starting the container `OAI-gNB`.
-
-You can follow the step
-[configure-network-interfaces-and-dpdk-vfs](../../../doc/ORAN_FHI7.2_Tutorial.md#configure-network-interfaces-and-dpdk-vfs).
-
-### Interface towards AMF (N2)
-
-For `N2` interface we are using `macvlan` driver of docker.
-
-You can use the `bridge` driver, in situation
-
-- When the core network is running on the same machine
-- or different machine but you have configured
-needed `ip route` and forwarding to access the core network from RAN host.
-
-To configure docker `macvlan` network
-you need to choose `ipam.config` and `driver_opts.parent` are per your environment
-
-```
-    oai-net:
-        driver: macvlan
-        name: oai-net
-        ipam:
-            config:
-                - subnet: "172.21.16.0/22"
-                  ip_range: "172.21.18.20/32"
-                  gateway: "172.21.19.254"
-        driver_opts:
-            com.docker.network.bridge.name: "oai-net"
-            parent: ens7f0
-```
-
-To configure `bridge` network you need to choose `ipam.config.subnet` as per your environment.
-
-```
-    oai-net:
-        driver: bridge
-        name: oai-net
-        ipam:
-            config:
-                - subnet: 192.168.72.128/26
-        driver_opts:
-            com.docker.network.bridge.name: "oai-net"
-```
-
-## Deploy OAI-gNB Container
-
-The [configuration file](../../conf_files/gnb.sa.band77.273prb.fhi72.4x4.2L-metanoia.conf) used by docker compose is configured for Metanoia RU.
-
-```bash
-docker-compose up -d
-```
-
-To check the logs
-
-```bash
-docker logs oai-gnb -f
-```

ci-scripts/yaml_files/sa_fhi_7.2_metanoia_2x2_gnb/docker-compose.yml

@@ -1,39 +0,0 @@
-services:
-    oai-gnb:
-        image: ${REGISTRY:-oaisoftwarealliance}/oai-gnb-fhi72:${TAG:-develop}
-        cap_add:
-            - IPC_LOCK
-            - SYS_NICE
-        cap_drop:
-            - ALL
-        container_name: oai-gnb
-        environment:
-            TZ: Europe/Paris
-            USE_ADDITIONAL_OPTIONS: --sa --thread-pool 7,8,9,10,11,12
-        devices:
-            - /dev/vfio:/dev/vfio/
-        volumes:
-            - ../../conf_files/gnb.sa.band77.273prb.fhi72.4x4.2L-metanoia.conf:/opt/oai-gnb/etc/gnb.conf
-            - /dev/hugepages:/dev/hugepages
-        # Please change these values based on your system
-        cpuset: "0,1,2,3,4,5,6,7,8,9,10,11,12"
-        networks:
-            oai-net:
-                ipv4_address: 172.21.18.20
-        healthcheck:
-           test: /bin/bash -c "pgrep nr-softmodem"
-           interval: 10s
-           timeout: 5s
-           retries: 5
-networks:
-    oai-net:
-        driver: macvlan
-        name: oai-net
-        ipam:
-            config:
-                - subnet: "172.21.16.0/22"
-                  ip_range: "172.21.18.20/32"
-                  gateway: "172.21.19.254"
-        driver_opts:
-            com.docker.network.bridge.name: "oai-net"
-            parent: ens7f0

ci-scripts/yaml_files/sa_fhi_7.2_metanoia_2x2_gnb/setup_cleanup.sh

@@ -1,5 +0,0 @@
-set -e
-sudo cpupower idle-set -E > /dev/null
-sudo sysctl kernel.sched_rt_runtime_us=950000
-sudo sysctl kernel.timer_migration=1
-exit 0

ci-scripts/yaml_files/sa_fhi_7.2_metanoia_2x2_gnb/setup_sriov_metanoia.sh

@@ -1,20 +0,0 @@
-set -e
-sudo cpupower idle-set -D 0 > /dev/null
-sudo sysctl kernel.sched_rt_runtime_us=-1
-sudo sysctl kernel.timer_migration=0
-sudo ethtool -G ens7f1 rx 8160 tx 8160
-sudo sh -c 'echo 0 > /sys/class/net/ens7f1/device/sriov_numvfs'
-sudo sh -c 'echo 3 > /sys/class/net/ens7f1/device/sriov_numvfs'
-sudo modprobe -r iavf
-sudo modprobe iavf
-# this next 2 lines is for C/U planes
-sudo ip link set ens7f1 vf 0 mac 00:11:22:33:44:55 vlan 3 spoofchk off mtu 9000
-sudo ip link set ens7f1 vf 1 mac 00:11:22:33:44:54 vlan 3 spoofchk off mtu 9000
-sleep 1
-# These are the DPDK bindings for C/U-planes on vlan 1
-sudo /usr/local/bin/dpdk-devbind.py --unbind c3:11.0
-sudo /usr/local/bin/dpdk-devbind.py --unbind c3:11.1
-sudo modprobe vfio-pci
-sudo /usr/local/bin/dpdk-devbind.py --bind vfio-pci c3:11.0
-sudo /usr/local/bin/dpdk-devbind.py --bind vfio-pci c3:11.1
-exit 0

cmake_targets/at_commands/CMakeLists.txt

@@ -105,7 +105,11 @@ add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
 ##########################
 # NAS LAYER OPTIONS
 ##########################
+add_boolean_option(ENABLE_NAS_UE_LOGGING   True  "????")
+add_boolean_option(NAS_BUILT_IN_EPC        False "MME NAS layer not present in this executable")
 add_boolean_option(NAS_BUILT_IN_UE         False  "UE NAS layer present in this executable")
+add_boolean_option(NAS_UE                  True  "NAS UE INSTANCE (<> NAS_MME)")
+add_boolean_option(NAS_MME                 False "NAS_UE and NAS_MME are incompatible options")
 
 ################################################################################
 # SECU LIB

cmake_targets/autotests/test_case_list.xml

@@ -318,8 +318,7 @@
                                     (Test25: Format 2 11-bit 2/273 PRB),
                                     (Test26: Format 2 12-bit 8/273 PRB),
                                     (Test27: Format 2 19-bit 8/273 PRB),
-                                    (Test28: Format 2 64-bit 16/273 PRB),
-                                    (Test29: Format 2 64-bit 16/273 PRB Delay 2us)</desc>
+                                    (Test28: Format 2 64-bit 16/273 PRB)</desc>
       <main_exec>nr_pucchsim</main_exec>
       <main_exec_args>-R 106 -i 1 -P 0 -b 1 -s-2 -n1000
                       -R 106 -i 1 -P 0 -b 2 -s-2 -n1000
@@ -348,9 +347,8 @@
                       -R 273 -z8 -i 1 -P 2 -b 11 -s6 -n1000
                       -R 273 -z8 -i 1 -P 2 -q8 -b 12 -s-3 -n1000
                       -R 273 -z8 -i 1 -P 2 -q8 -b 19 -s-3 -n1000
-                      -R 273 -z8 -i 1 -P 2 -q16 -b 64 -s-3 -n1000
-                      -R 273 -z8 -i 1 -P 2 -q16 -b 64 -s-3 -d 2 -n1000</main_exec_args>
-      <tags>test1 test2 test3 test4 test5 test6 test7 test8 test9 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29</tags>
+                      -R 273 -z8 -i 1 -P 2 -q16 -b 64 -s-3 -n1000</main_exec_args>
+      <tags>test1 test2 test3 test4 test5 test6 test7 test8 test9 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 test20 test21 test22 test23 test24 test25 test26 test27 test28</tags>
       <search_expr_true>PUCCH test OK</search_expr_true>
       <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
       <nruns>3</nruns>

cmake_targets/build_oai

@@ -46,7 +46,7 @@ BUILD_DOXYGEN=0
 DISABLE_HARDWARE_DEPENDENCY="False"
 CMAKE_BUILD_TYPE="RelWithDebInfo"
 CMAKE_CMD="$CMAKE"
-OPTIONAL_LIBRARIES="telnetsrv enbscope uescope nrscope ldpc_cuda ldpc_t2 ldpc_xdma websrv oai_iqplayer imscope"
+OPTIONAL_LIBRARIES="telnetsrv enbscope uescope nrscope ldpc_cuda ldpc_t2 websrv oai_iqplayer imscope"
 TARGET_LIST=""
 BUILD_TOOL_OPT="-j$(nproc)"
 

cmake_targets/tools/MODULES/Findxran.cmake

@@ -83,15 +83,12 @@ find_path(xran_INCLUDE_DIR
     xran_pkt.h
     xran_pkt_up.h
     xran_sync_api.h
-  HINTS ${xran_LOCATION}
-  PATH_SUFFIXES api include
-  NO_DEFAULT_PATH
+  PATHS ${xran_LOCATION}
+  PATH_SUFFIXES api
 )
 find_library(xran_LIBRARY
   NAMES xran
-  HINTS ${xran_LOCATION}
-  PATH_SUFFIXES build api
-  NO_DEFAULT_PATH
+  PATHS ${xran_LOCATION}/build
 )
 if (NOT xran_LIBRARY)
   message(FATAL_ERROR "could not detect xran build artifacts at ${xran_LOCATION}/build")

cmake_targets/tools/build_helper

@@ -131,7 +131,6 @@ check_supported_distribution() {
         "rocky9.2")    return 0 ;;
         "rocky9.3")    return 0 ;;
         "rocky9.4")    return 0 ;;
-        "rocky9.5")    return 0 ;;
     esac
     return 1
 }
@@ -226,7 +225,7 @@ compilations() {
     ret=$?
   } > $dlog/$logfile 2>&1
   # Print the errors and warnings for CI purposes
-  grep -E -A5 -B5 "warning:|error:| Error " $dlog/$logfile || true
+  grep -E -A3 "warning:|error:" $dlog/$logfile || true
   check_warnings "$dlog/$logfile"
   if [[ $ret -eq 0 ]]; then
      echo_success "$targets compiled"

common/CMakeLists.txt

@@ -3,7 +3,7 @@ add_subdirectory(config/yaml)
 
 configure_file(oai_version.h.in oai_version.h @ONLY)
 
-add_library(instrumentation INTERFACE)
+add_library(instrumentation INTERFACE instrumentation.h)
 target_include_directories(instrumentation INTERFACE .)
 if (TRACY_ENABLE)
   target_link_libraries(instrumentation INTERFACE Tracy::TracyClient)

common/config/config_common.c

@@ -108,7 +108,6 @@ void *config_allocate_new(configmodule_interface_t *cfg, int sz, bool autoFree)
   // add the memory piece in the managed memory pieces list
   pthread_mutex_lock(&cfg->memBlocks_mutex);
   int newBlockIdx=cfg->numptrs++;
-  AssertFatal(newBlockIdx < sizeofArray(cfg->oneBlock), "reached maximum number of dynamically allocatable blocks\n");
   oneBlock_t* tmp=&cfg->oneBlock[newBlockIdx];
   tmp->ptrs = (char *)ptr;
   tmp->ptrsAllocated = true;

common/config/config_load_configmodule.h

@@ -41,7 +41,7 @@
 #include "common/config/config_paramdesc.h"
 #include "common/utils/T/T.h"
 #define CONFIG_MAX_OOPT_PARAMS    10     // maximum number of parameters in the -O option (-O <cfgmode>:P1:P2...
-#define CONFIG_MAX_ALLOCATEDPTRS  32768   // maximum number of parameters that can be dynamicaly allocated in the config module
+#define CONFIG_MAX_ALLOCATEDPTRS  2048   // maximum number of parameters that can be dynamicaly allocated in the config module
 
 /* default values for configuration module parameters */
 #define CONFIG_LIBCONFIGFILE        "libconfig"  // use libconfig file

common/ran_context.h

@@ -32,9 +32,7 @@
 
 #ifndef __RAN_CONTEXT_H__
 #define __RAN_CONTEXT_H__
-#ifdef __cplusplus
-extern "C" {
-#endif
+
 #include <pthread.h>
 #include <stdint.h>
 
@@ -113,8 +111,6 @@ typedef struct {
 } RAN_CONTEXT_t;
 
 extern RAN_CONTEXT_t RC;
+
 #define NB_eNB_INST RC.nb_inst
-#ifdef __cplusplus
-}
-#endif
 #endif

common/utils/LOG/DOC/rtusage.md

@@ -228,10 +228,6 @@ It can also be retrieved when using the telnet server, as explained  [below](###
 | `<flag>_debug` | `boolean` | 0 = false | Triggers the activation of conditional code identified by the specified flag.
 | `<flag>_dump` | `boolean` | 0 = false| Triggers buffer dump, on the console in text form or in a file in matlab format, depending on the developper choice and forcasted usage|
 
-Example: dump all ASN.1 structures during operation with
-`--log_config.ASN1_debug`. To get a list of all flag/dump options, provide an
-invalid flag, e.g. `--log_config.HELP_debug`.
-
 ### Using the configuration file to configure the logging facility
 The following example sets all components log level to info, exept for hw,phy,mac,rlc,pdcp,rrc which log levels are set to error or warning.
 ```bash

common/utils/LOG/log.c

@@ -120,6 +120,28 @@ mapping * log_option_names_ptr(void)
   return log_options;
 }
 
+static mapping log_maskmap[] = {{"PRACH", DEBUG_PRACH},
+                               {"RU", DEBUG_RU},
+                               {"UE_PHYPROC", DEBUG_UE_PHYPROC},
+                               {"LTEESTIM", DEBUG_LTEESTIM},
+                               {"DLCELLSPEC", DEBUG_DLCELLSPEC},
+                               {"ULSCH", DEBUG_ULSCH},
+                               {"RRC", DEBUG_RRC},
+                               {"PDCP", DEBUG_PDCP},
+                               {"DFT", DEBUG_DFT},
+                               {"ASN1", DEBUG_ASN1},
+                               {"CTRLSOCKET", DEBUG_CTRLSOCKET},
+                               {"SECURITY", DEBUG_SECURITY},
+                               {"NAS", DEBUG_NAS},
+                               {"RLC", DEBUG_RLC},
+                               {"DLSCH_DECOD", DEBUG_DLSCH_DECOD},
+                               {"UE_TIMING", UE_TIMING},
+                               {NULL, -1}};
+mapping * log_maskmap_ptr(void)
+{
+  return log_maskmap;
+}
+
 /* .log_format = 0x13 uncolored standard messages
  * .log_format = 0x93 colored standard messages */
 /* keep white space in first position; switching it to 0 allows colors to be disabled*/
@@ -305,9 +327,6 @@ int write_file_matlab(const char *fname, const char *vname, void *data, int leng
   return 0;
 }
 
-#define FLAG_SETDEBUG(flag) g_log->debug_mask.DEBUG_##flag = *logparams_debug[i++].uptr;
-#define FLAG_SETDUMP(flag) g_log->dump_mask.DEBUG_##flag = *logparams_dump[i++].uptr;
-
 /* get log parameters from configuration file */
 void log_getconfig(log_t *g_log)
 {
@@ -316,6 +335,8 @@ void log_getconfig(log_t *g_log)
   paramdef_t logparams_defaults[] = LOG_GLOBALPARAMS_DESC;
   paramdef_t logparams_level[MAX_LOG_PREDEF_COMPONENTS];
   paramdef_t logparams_logfile[MAX_LOG_PREDEF_COMPONENTS];
+  paramdef_t logparams_debug[sizeofArray(log_maskmap)];
+  paramdef_t logparams_dump[sizeofArray(log_maskmap)];
   int ret = config_get(config_get_if(), logparams_defaults, sizeofArray(logparams_defaults), CONFIG_STRING_LOG_PREFIX);
 
   if (ret <0) {
@@ -383,45 +404,37 @@ void log_getconfig(log_t *g_log)
   }
 
   /* build then read the debug and dump parameter array */
-  int sz = 0;
-  for (const char *const *ptr = flag_name; strlen(*ptr) > 1; ptr++)
-    sz++;
-  paramdef_t logparams_debug[sz];
-  paramdef_t logparams_dump[sz];
-  for (int i = 0; i < sz; i++) {
-    logparams_debug[i] = (paramdef_t){
-        .type = TYPE_UINT,
-        .paramflags = PARAMFLAG_BOOL,
-    };
-    sprintf(logparams_debug[i].optname, LOG_CONFIG_DEBUG_FORMAT, flag_name[i]);
-    logparams_dump[i] = (paramdef_t){.type = TYPE_UINT, .paramflags = PARAMFLAG_BOOL};
-    sprintf(logparams_dump[i].optname, LOG_CONFIG_DUMP_FORMAT, flag_name[i]);
+  for (int i=0; log_maskmap[i].name != NULL ; i++) {
+    sprintf(logparams_debug[i].optname,  LOG_CONFIG_DEBUG_FORMAT, log_maskmap[i].name);
+    sprintf(logparams_dump[i].optname,   LOG_CONFIG_DUMP_FORMAT, log_maskmap[i].name);
+    logparams_debug[i].defuintval  = 0;
+    logparams_debug[i].type        = TYPE_UINT;
+    logparams_debug[i].paramflags  = PARAMFLAG_BOOL;
+    logparams_debug[i].uptr        = NULL;
+    logparams_debug[i].chkPptr     = NULL;
+    logparams_debug[i].numelt      = 0;
+    logparams_dump[i].defuintval  = 0;
+    logparams_dump[i].type        = TYPE_UINT;
+    logparams_dump[i].paramflags  = PARAMFLAG_BOOL;
+    logparams_dump[i].uptr        = NULL;
+    logparams_dump[i].chkPptr     = NULL;
+    logparams_dump[i].numelt      = 0;
   }
 
-  config_get(config_get_if(), logparams_debug, sz, CONFIG_STRING_LOG_PREFIX);
-  config_get(config_get_if(), logparams_dump, sz, CONFIG_STRING_LOG_PREFIX);
+  config_get(config_get_if(), logparams_debug, sizeofArray(log_maskmap) - 1, CONFIG_STRING_LOG_PREFIX);
+  config_get(config_get_if(), logparams_dump, sizeofArray(log_maskmap) - 1, CONFIG_STRING_LOG_PREFIX);
 
-  bool old = CONFIG_ISFLAGSET(CONFIG_NOABORTONCHKF);
-  CONFIG_SETRTFLAG(CONFIG_NOABORTONCHKF);
-  if (config_check_unknown_cmdlineopt(config_get_if(), CONFIG_STRING_LOG_PREFIX) > 0) {
-    printf("Existing log_config options:\n");
-    printf("   Boolean options:\n");
-    for (int i = 0; i < sz; i++)
-      printf("      %s, \t%s\n", logparams_debug[i].optname, logparams_dump[i].optname);
-    printf("   Log level per module (");
-    for (int i = 0; log_level_names[i].name != NULL; i++)
-      printf("%s ", log_level_names[i].name);
-    printf(")\n");
-    for (int i = 0; i < MAX_LOG_PREDEF_COMPONENTS; i++)
-      printf("      %s\n", logparams_level[i].optname);
+  if (config_check_unknown_cmdlineopt(config_get_if(), CONFIG_STRING_LOG_PREFIX) > 0)
     exit(1);
+
+  /* set the debug mask according to the debug parameters values */
+  for (int i=0; log_maskmap[i].name != NULL ; i++) {
+    if (*(logparams_debug[i].uptr) )
+      g_log->debug_mask = g_log->debug_mask | log_maskmap[i].value;
+
+    if (*(logparams_dump[i].uptr) )
+      g_log->dump_mask = g_log->dump_mask | log_maskmap[i].value;
   }
-  if (!old)
-    CONFIG_CLEARRTFLAG(CONFIG_NOABORTONCHKF);
-  int i = 0;
-  FOREACH_FLAG(FLAG_SETDEBUG);
-  i = 0;
-  FOREACH_FLAG(FLAG_SETDUMP);
 
   /* log globally enabled/disabled */
   set_glog_onlinelog(consolelog);
@@ -638,10 +651,6 @@ void log_dump(int component,
       wbuf=malloc((buffsize * 10)  + 64 + MAX_LOG_TOTAL);
       break;
 
-    case LOG_DUMP_C16:
-      wbuf = malloc((buffsize * 10) + 64 + MAX_LOG_TOTAL);
-      break;
-
     case LOG_DUMP_CHAR:
     default:
       wbuf=malloc((buffsize * 3 ) + 64 + MAX_LOG_TOTAL);
@@ -660,21 +669,6 @@ void log_dump(int component,
           pos = pos + sprintf(wbuf+pos,"%04.4lf ", (double)((double *)buffer)[i]);
           break;
 
-        case LOG_DUMP_I16: {
-          int16_t *tmp = ((int16_t *)buffer) + i;
-          pos = pos + sprintf(wbuf + pos, "%d, ", *tmp);
-        } break;
-
-        case LOG_DUMP_C16: {
-          int16_t *tmp = ((int16_t *)buffer) + i * 2;
-          pos = pos + sprintf(wbuf + pos, "(%d,%d), ", *tmp, *(tmp + 1));
-        } break;
-
-        case LOG_DUMP_C32: {
-          int32_t *tmp = ((int32_t *)buffer) + i * 2;
-          pos = pos + sprintf(wbuf + pos, "(%d,%d), ", *tmp, *(tmp + 1));
-        } break;
-
         case LOG_DUMP_CHAR:
         default:
           pos = pos + sprintf(wbuf+pos,"%02x ", (unsigned char)((unsigned char *)buffer)[i]);

common/utils/LOG/log.h

@@ -88,7 +88,7 @@ extern "C" {
 #define NUM_LOG_LEVEL 6 /*!< \brief the number of message levels users have with LOG (OAILOG_DISABLE is not available to user as a level, so it is not included)*/
 /** @}*/
 
-#define SET_LOG_OPTION(O) g_log->flag = (g_log->flag | O)
+#define SET_LOG_OPTION(O)   g_log->flag = (g_log->flag | O)
 #define CLEAR_LOG_OPTION(O) g_log->flag = (g_log->flag & (~O))
 
 /** @defgroup macros to identify a debug entity
@@ -99,37 +99,28 @@ extern "C" {
  *            server.
  *  @brief
  * @{*/
+#define DEBUG_PRACH        (1<<0)
+#define DEBUG_RU           (1<<1)
+#define DEBUG_UE_PHYPROC   (1<<2)
+#define DEBUG_LTEESTIM     (1<<3)
+#define DEBUG_DLCELLSPEC   (1<<4)
+#define DEBUG_ULSCH        (1<<5)
+#define DEBUG_RRC          (1<<6)
+#define DEBUG_PDCP         (1<<7)
+#define DEBUG_DFT          (1<<8)
+#define DEBUG_ASN1         (1<<9)
+#define DEBUG_CTRLSOCKET   (1<<10)
+#define DEBUG_SECURITY     (1<<11)
+#define DEBUG_NAS          (1<<12)
+#define DEBUG_RLC          (1<<13)
+#define DEBUG_DLSCH_DECOD  (1<<14)
+#define UE_TIMING          (1<<20)
 
-#define FOREACH_FLAG(FLAG_DEF) \
-  FLAG_DEF(PRACH)              \
-  FLAG_DEF(UE_PHYPROC)         \
-  FLAG_DEF(LTEESTIM)           \
-  FLAG_DEF(DLCELLSPEC)         \
-  FLAG_DEF(ULSCH)              \
-  FLAG_DEF(RRC)                \
-  FLAG_DEF(PDCP)               \
-  FLAG_DEF(DFT)                \
-  FLAG_DEF(ASN1)               \
-  FLAG_DEF(CTRLSOCKET)         \
-  FLAG_DEF(SECURITY)           \
-  FLAG_DEF(NAS)                \
-  FLAG_DEF(DLSCH_DECOD)        \
-  FLAG_DEF(UE_TIMING)          \
-  FLAG_DEF(F1AP)
+#define SET_LOG_DEBUG(B)   g_log->debug_mask = (g_log->debug_mask | B)
+#define CLEAR_LOG_DEBUG(B) g_log->debug_mask = (g_log->debug_mask & (~B))
 
-#define FLAG_BITF(flag) uint64_t DEBUG_##flag: 1;
-typedef struct {
-  FOREACH_FLAG(FLAG_BITF)
-} debug_flags_t;
-
-#define FLAG_TEXT(flag) #flag,
-static const char *const flag_name[] = {FOREACH_FLAG(FLAG_TEXT) ""};
-
-#define SET_LOG_DEBUG(B) g_log->debug_mask.B = true
-#define CLEAR_LOG_DEBUG(B) g_log->debug_mask.B = false
-
-#define SET_LOG_DUMP(B) g_log->dump_mask.B = true
-#define CLEAR_LOG_DUMP(B) g_log->dump_mask.B = false
+#define SET_LOG_DUMP(B)   g_log->dump_mask = (g_log->dump_mask | B)
+#define CLEAR_LOG_DUMP(B) g_log->dump_mask = (g_log->dump_mask & (~B))
 
 #define FOREACH_COMP(COMP_DEF)  \
   COMP_DEF(PHY, log)            \
@@ -224,8 +215,8 @@ typedef struct {
   char                    level2string[NUM_LOG_LEVEL];
   int                     flag;
   char                   *filelog_name;
-  debug_flags_t debug_mask;
-  debug_flags_t dump_mask;
+  uint64_t                debug_mask;
+  uint64_t                dump_mask;
 } log_t;
 
 #ifdef LOG_MAIN
@@ -239,28 +230,7 @@ extern "C" {
 }
 #endif
 #endif
-#define FLAG_DEBUG_SET(flag)              \
-  if (strcmp(name, #flag) == 0) {         \
-    g_log->debug_mask.DEBUG_##flag = val; \
-    return true;                          \
-  };
-static inline bool set_log_debug(char *name, bool val)
-{
-  FOREACH_FLAG(FLAG_DEBUG_SET);
-  printf("Error: setting log debug of %s option, not existing\n", name);
-  return false;
-}
-#define FLAG_DUMP_SET(flag)              \
-  if (strcmp(name, #flag) == 0) {        \
-    g_log->dump_mask.DEBUG_##flag = val; \
-    return true;                         \
-  };
-static inline bool set_log_dump(char *name, bool val)
-{
-  FOREACH_FLAG(FLAG_DUMP_SET);
-  printf("Error: setting log dump of %s option, not existing\n", name);
-  return false;
-}
+
 /*----------------------------------------------------------------------------*/
 int  logInit (void);
 void logTerm (void);
@@ -365,9 +335,6 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
  * @{*/
 #define LOG_DUMP_CHAR       0
 #define LOG_DUMP_DOUBLE     1
-#define LOG_DUMP_I16 2
-#define LOG_DUMP_C16 3
-#define LOG_DUMP_C32 4
 // debugging macros
 #define LOG_F  LOG_I           /* because  LOG_F was originaly to dump a message or buffer but is also used as a regular level...., to dump use LOG_DUMPMSG */
 
@@ -448,15 +415,15 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
 /* macro used to dump a buffer or a message as in openair2/RRC/LTE/RRC_eNB.c, replaces LOG_F macro */
 #define LOG_DUMPMSG(c, f, b, s, x...)      \
   do {                                     \
-    if (g_log->dump_mask.f)                \
+    if (g_log->dump_mask & f)              \
       log_dump(c, b, s, LOG_DUMP_CHAR, x); \
   } while (0)
 
 /* bitmask dependent macros, to isolate debugging code */
-#define LOG_DEBUGFLAG(D) (g_log->debug_mask.D)
+#define LOG_DEBUGFLAG(D) (g_log->debug_mask & D)
 
 /* bitmask dependent macros, to generate debug file such as matlab file or message dump */
-#define LOG_DUMPFLAG(D) (g_log->dump_mask.D)
+#define LOG_DUMPFLAG(D) (g_log->dump_mask & D)
 
 #define LOG_M(file, vector, data, len, dec, format)             \
   do {                                                          \
@@ -559,11 +526,11 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
   } while (0)
 
 #define nfapi_log(FILE, FNC, LN, COMP, LVL, FMT...)
-#define LOG_DEBUGFLAG(D) (g_log->debug_mask.D)
-#define LOG_DUMPFLAG(D) (g_log->dump_mask.D)
+#define LOG_DEBUGFLAG(D) (g_log->debug_mask & D)
+#define LOG_DUMPFLAG(D) (g_log->dump_mask & D)
 #define LOG_DUMPMSG(c, f, b, s, x...)      \
   do {                                     \
-    if (g_log->dump_mask.f)                \
+    if (g_log->dump_mask & f)              \
       log_dump(c, b, s, LOG_DUMP_CHAR, x); \
   } while (0) /* */