LDPC processing: bugfix: clear d[] if first transmission is DTX

If first transmission (round == 0) is DTX then d[] will not be cleared
for following transmissions (those that are not DTX) in
nr_rate_matching_ldpc_rx() because new_rx will not be 1, leading
to potential wrong decoding.

.clang-format

@@ -103,5 +103,85 @@ SpacesInParentheses: false
 SpacesInSquareBrackets: false
 TabWidth:        2
 UseTab:          Never
+---
+Language: JavaScript
+# BasedOnStyle:  Google
+AccessModifierOffset: -1
+AlignAfterOpenBracket: Align
+AlignConsecutiveAssignments: false
+AlignConsecutiveDeclarations: false
+AlignOperands:   true
+AlignTrailingComments: false
+AllowAllParametersOfDeclarationOnNextLine: false
+AllowShortBlocksOnASingleLine: false
+AllowShortCaseLabelsOnASingleLine: false
+AllowShortFunctionsOnASingleLine: None
+AllowShortIfStatementsOnASingleLine: false
+AllowShortLoopsOnASingleLine: false
+AlwaysBreakAfterDefinitionReturnType: None
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: true
+BinPackArguments: false
+BinPackParameters: false
+BraceWrapping:
+  AfterClass:      false
+  AfterControlStatement: false
+  AfterEnum:       false
+  AfterFunction:   true
+  AfterNamespace:  false
+  AfterObjCDeclaration: false
+  BeforeCatch:     false
+  BeforeElse:      false
+  IndentBraces:    false
+  SplitEmptyFunction: true
+  SplitEmptyRecord: true
+  SplitEmptyNamespace: true
+BreakBeforeBinaryOperators: NonAssignment
+BreakBeforeBraces: Custom
+BreakBeforeInheritanceComma: false
+BreakBeforeTernaryOperators: true
+BreakConstructorInitializersBeforeComma: false
+BreakConstructorInitializers: BeforeColon
+BreakStringLiterals: true
+ColumnLimit:     200
+CommentPragmas:  '^ IWYU pragma:'
+CompactNamespaces: false
+ConstructorInitializerAllOnOneLineOrOnePerLine: true
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
+Cpp11BracedListStyle: true
+DisableFormat:   false
+FixNamespaceComments: true
+IndentCaseLabels: true
+IndentPPDirectives: None
+IndentWidth:     2
+IndentWrappedFunctionNames: false
+KeepEmptyLinesAtTheStartOfBlocks: false
+MaxEmptyLinesToKeep: 1
+NamespaceIndentation: None
+PenaltyBreakAssignment: 2
+PenaltyBreakBeforeFirstCallParameter: 1
+PenaltyBreakComment: 300
+PenaltyBreakFirstLessLess: 120
+PenaltyBreakString: 1000
+PenaltyExcessCharacter: 1000000
+PenaltyReturnTypeOnItsOwnLine: 200
+ReflowComments:  true
+SortUsingDeclarations: false
+SpaceAfterCStyleCast: false
+SpaceAfterTemplateKeyword: true
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeParens: ControlStatements
+SpaceInEmptyParentheses: false
+SpacesBeforeTrailingComments: 1
+SpacesInAngles:  false
+SpacesInContainerLiterals: true
+SpacesInCStyleCastParentheses: false
+SpacesInParentheses: false
+SpacesInSquareBrackets: false
+DeriveLineEnding: true
+TabWidth:        2
+JavaScriptQuotes: Double 
+UseTab:          Never
 ...
 

README.md

@@ -36,11 +36,20 @@ Please see [NOTICE](NOTICE.md) file for third party software that is included in
  *  [How to build](./doc/BUILD.md)
  *  [How to run the modems](./doc/RUNMODEM.md)
 
+More information and documentation can be found in the [doc folder](./doc).
+Unfortunately, not all information is available there, and information for
+specific sub-systems might be available in the corresponding sub-directories.
+To find all READMEs, this command might be handy:
+
+```
+find . -iname "readme*"
+```
+
 # RAN repository structure #
 
 The OpenAirInterface (OAI) software is composed of the following parts: 
 
-<pre>
+```
 openairinterface5g
 ├── ci-scripts        : Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
 ├── cmake_targets     : Build utilities to compile (simulation, emulation and real-time platforms), and generated build files.
@@ -88,5 +97,6 @@ openairinterface5g
 │   ├── TEST
 │   ├── UDP
 │   └── UTILS
+├── radio             : drivers for various radios such as USRP, AW2S, RFsim, ...
 └── targets           : Top-level wrappers for unitary simulation for PHY channels, system-level emulation (eNB-UE with and without S1), and realtime eNB and UE and RRH GW.
-</pre>
+```

charts/physims/Chart.yaml

@@ -16,7 +16,7 @@ icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_fin
 
 # This is the chart version. This version number should be incremented each time you make changes
 # to the chart and its templates, including the app version.
-version: 0.1.1
+version: 1.0.0
 
 # This is the version number of the application being deployed. This version number should be
 # incremented each time you make changes to the application.

charts/physims/charts/dlsim.100rb+tm2/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-dlsim-100rb-tm2.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-dlsim-100rb-tm2.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-dlsim-100rb-tm2.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-dlsim-100rb-tm2.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/dlsim.100rb+tm2/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-dlsim-100rb-tm2.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-dlsim-100rb-tm2.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-dlsim-100rb-tm2.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.100rb+tm2" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.dlsim100rbtm2}}
+      nodeName: {{ .Values.global.nodeName.dlsim100rbtm2 }}
+      {{- end }}

charts/physims/charts/dlsim.100rb+tm2/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-dlsim-100rb-tm2.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-dlsim-100rb-tm2
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-dlsim-100rb-tm2.selectorLabels" . | nindent 4 }}

charts/physims/charts/dlsim.100rb+tm2/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/dlsim.basic/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-dlsim-basic.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-dlsim-basic.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-dlsim-basic.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-dlsim-basic.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/dlsim.basic/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-dlsim-basic.labels" . | nindent 4 }}
+  name: {{ .Chart.Name }}    
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-dlsim-basic.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-dlsim-basic.selectorLabels" . | nindent 8 }}
+         app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.basic" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
+      serviceAccountName: {{ .Values.global.serviceAccountName }} 
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.dlsimbasic}}
+      nodeName: {{ .Values.global.nodeName.dlsimbasic }}
+      {{- end }}

charts/physims/charts/dlsim.basic/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-dlsim-basic.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-dlsim-basic
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-dlsim-basic.selectorLabels" . | nindent 4 }}

charts/physims/charts/dlsim.basic/values.yaml

@@ -27,31 +27,15 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
+  privileged: false
 
-service:
-  type: ClusterIP
-  port: 80
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
+resources:
+   limits:
+     cpu: 100m
+     memory: 128Mi
+   requests:
+     cpu: 100m
+     memory: 128Mi
 
 nodeSelector: {}
 

charts/physims/charts/ldpctest/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-ldpctest.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-ldpctest.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-ldpctest.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-ldpctest.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/ldpctest/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-ldpctest.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-ldpctest.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-ldpctest.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "ldpctest" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.ldpctest}}
+      nodeName: {{ .Values.global.nodeName.ldpctest }}
+      {{- end }}

charts/physims/charts/ldpctest/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-ldpctest.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-ldpctest
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-ldpctest.selectorLabels" . | nindent 4 }}

charts/physims/charts/ldpctest/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-dlschsim/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-dlschsim.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-dlschsim.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-dlschsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-dlschsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-dlschsim/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlschsim.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-dlschsim.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-dlschsim.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlschsim" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlschsim}}
+      nodeName: {{ .Values.global.nodeName.nrdlschsim }}
+      {{- end }}

charts/physims/charts/nr-dlschsim/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlschsim.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-dlschsim
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-dlschsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-dlschsim/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-dlsim.basic/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-dlsim-basic.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-dlsim-basic.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-dlsim-basic.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-dlsim-basic.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-dlsim.basic/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-basic.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-dlsim-basic.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-dlsim-basic.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.basic" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimbasic}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimbasic }}
+      {{- end }}

charts/physims/charts/nr-dlsim.basic/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-basic.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-dlsim-basic
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-dlsim-basic.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-dlsim.basic/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-dlsim-dmrs-ptrs.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-dlsim-dmrs-ptrs.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-dlsim-dmrs-ptrs.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-dlsim-dmrs-ptrs.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-dmrs-ptrs.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-dlsim-dmrs-ptrs.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-dlsim-dmrs-ptrs.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.dmrs+ptrs" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimdmrsptrs}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimdmrsptrs }}
+      {{- end }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-dmrs-ptrs.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-dlsim-dmrs-ptrs
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-dlsim-dmrs-ptrs.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-dlsim.mcs+mimo/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-dlsim-mcs-mimo.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-dlsim-mcs-mimo.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-dlsim-mcs-mimo.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-dlsim-mcs-mimo.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-dlsim.mcs+mimo/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-mcs-mimo.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-dlsim-mcs-mimo.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-dlsim-mcs-mimo.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.mcs+mimo" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimmcsmimo}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimmcsmimo }}
+      {{- end }}

charts/physims/charts/nr-dlsim.mcs+mimo/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-mcs-mimo.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-dlsim-mcs-mimo
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-dlsim-mcs-mimo.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-dlsim.mcs+mimo/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-dlsim.offset/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-dlsim-offset.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-dlsim-offset.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-dlsim-offset.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-dlsim-offset.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-dlsim.offset/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-offset.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-dlsim-offset.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-dlsim-offset.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.offset" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrdlsimoffset}}
+      nodeName: {{ .Values.global.nodeName.nrdlsimoffset }}
+      {{- end }}

charts/physims/charts/nr-dlsim.offset/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-dlsim-offset.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-dlsim-offset
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-dlsim-offset.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-dlsim.offset/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-pbchsim.106rb/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-pbchsim-106rb.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-pbchsim-106rb.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-pbchsim-106rb.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-pbchsim-106rb.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-pbchsim.106rb/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pbchsim-106rb.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-pbchsim-106rb.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-pbchsim-106rb.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.106rb" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbschsim106rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbschsim106rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.106rb/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pbchsim-106rb.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-pbchsim-106rb
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-pbchsim-106rb.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-pbchsim.106rb/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-pbchsim.217rb/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-pbchsim-217rb.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-pbchsim-217rb.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-pbchsim-217rb.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-pbchsim-217rb.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-pbchsim.217rb/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pbchsim-217rb.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-pbchsim-217rb.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-pbchsim-217rb.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.217rb" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbchsim217rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim217rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.217rb/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pbchsim-217rb.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-pbchsim-217rb
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-pbchsim-217rb.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-pbchsim.217rb/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-pbchsim.273rb/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-pbchsim-273rb.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-pbchsim-273rb.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-pbchsim-273rb.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-pbchsim-273rb.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-pbchsim.273rb/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pbchsim-273rb.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-pbchsim-273rb.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-pbchsim-273rb.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.273rb" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpbchsim273rb}}
+      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
+      {{- end }}

charts/physims/charts/nr-pbchsim.273rb/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pbchsim-273rb.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-pbchsim-273rb
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-pbchsim-273rb.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-pbchsim.273rb/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-prachsim/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-prachsim.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-prachsim.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-prachsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-prachsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-prachsim/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-prachsim.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-prachsim.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-prachsim.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_prachsim" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrprachsim}}
+      nodeName: {{ .Values.global.nodeName.nrprachsim }}
+      {{- end }}

charts/physims/charts/nr-prachsim/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-prachsim.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-prachsim
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-prachsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-prachsim/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-pucchsim/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-pucchsim.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-pucchsim.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-pucchsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-pucchsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-pucchsim/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pucchsim.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-pucchsim.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-pucchsim.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_pucchsim" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrpucchsim}}
+      nodeName: {{ .Values.global.nodeName.nrpucchsim }}
+      {{- end }}

charts/physims/charts/nr-pucchsim/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-pucchsim.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-pucchsim
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-pucchsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-pucchsim/values.yaml

@@ -27,15 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
+  privileged: false
 
 service:
   type: ClusterIP

charts/physims/charts/nr-ulschsim/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-ulschsim.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-ulschsim.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-ulschsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-ulschsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-ulschsim/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulschsim.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-ulschsim.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-ulschsim.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulschsim" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulschsim}}
+      nodeName: {{ .Values.global.nodeName.nrulschsim }}
+      {{- end }}

charts/physims/charts/nr-ulschsim/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulschsim.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-ulschsim
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-ulschsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-ulschsim/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-ulsim.3gpp/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-ulsim-3gpp.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-ulsim-3gpp.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-ulsim-3gpp.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-ulsim-3gpp.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-ulsim.3gpp/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-3gpp.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-ulsim-3gpp.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-ulsim-3gpp.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.3gpp" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsim3gpp}}
+      nodeName: {{ .Values.global.nodeName.nrulsim3gpp }}
+      {{- end }}

charts/physims/charts/nr-ulsim.3gpp/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-3gpp.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-ulsim-3gpp
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-ulsim-3gpp.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-ulsim.3gpp/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-ulsim.mimo/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-ulsim-mimo.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-ulsim-mimo.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-ulsim-mimo.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-ulsim-mimo.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-ulsim.mimo/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-mimo.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-ulsim-mimo.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-ulsim-mimo.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.mimo" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimmimo}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmimo }}
+      {{- end }}

charts/physims/charts/nr-ulsim.mimo/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-mimo.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-ulsim-mimo
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-ulsim-mimo.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-ulsim.mimo/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-ulsim.misc/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-ulsim-misc.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-ulsim-misc.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-ulsim-misc.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-ulsim-misc.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-ulsim.misc/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-misc.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-ulsim-misc.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-ulsim-misc.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,8 +20,6 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
@@ -39,7 +29,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.misc" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimmisc}}
+      nodeName: {{ .Values.global.nodeName.nrulsimmisc }}
+      {{- end }}

charts/physims/charts/nr-ulsim.misc/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-misc.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-ulsim-misc
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-ulsim-misc.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-ulsim.misc/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/nr-ulsim.sc-fdma/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-nr-ulsim-sc-fdma.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-nr-ulsim-sc-fdma.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-nr-ulsim-sc-fdma.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-nr-ulsim-sc-fdma.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/nr-ulsim.sc-fdma/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-sc-fdma.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-nr-ulsim-sc-fdma.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-nr-ulsim-sc-fdma.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -39,7 +31,14 @@ spec:
           cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.sc-fdma" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.nrulsimscfdma}}
+      nodeName: {{ .Values.global.nodeName.nrulsimscfdma }}
+      {{- end }}

charts/physims/charts/nr-ulsim.sc-fdma/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-nr-ulsim-sc-fdma.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-nr-ulsim-sc-fdma
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-nr-ulsim-sc-fdma.selectorLabels" . | nindent 4 }}

charts/physims/charts/nr-ulsim.sc-fdma/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/polartest/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-polartest.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-polartest.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-polartest.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-polartest.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/polartest/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-polartest.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-polartest.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-polartest.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "polartest" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.polartest}}
+      nodeName: {{ .Values.global.nodeName.polartest }}
+      {{- end }}

charts/physims/charts/polartest/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-polartest.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-polartest
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-polartest.selectorLabels" . | nindent 4 }}

charts/physims/charts/polartest/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/smallblocktest/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-smallblocktest.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-smallblocktest.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-smallblocktest.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-smallblocktest.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/smallblocktest/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-smallblocktest.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-smallblocktest.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-smallblocktest.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "smallblocktest" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.smallblocktest}}
+      nodeName: {{ .Values.global.nodeName.smallblocktest }}
+      {{- end }}

charts/physims/charts/smallblocktest/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-smallblocktest.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-smallblocktest
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-smallblocktest.selectorLabels" . | nindent 4 }}

charts/physims/charts/smallblocktest/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/charts/ulsim/templates/NOTES.txt

@@ -1,15 +0,0 @@
-1. Get the application URL by running these commands:
-{{- if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "oai-ulsim.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "oai-ulsim.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "oai-ulsim.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
-  echo http://$SERVICE_IP:{{ .Values.service.port }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "oai-ulsim.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:80
-{{- end }}

charts/physims/charts/ulsim/templates/job.yaml

@@ -1,20 +1,12 @@
-apiVersion: apps/v1
-kind: Deployment
+apiVersion: batch/v1
+kind: Job
 metadata:
   name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-ulsim.labels" . | nindent 4 }}
 spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      {{- include "oai-ulsim.selectorLabels" . | nindent 6 }}
-  strategy:
-    type: Recreate
   template:
     metadata:
       labels:
-        {{- include "oai-ulsim.selectorLabels" . | nindent 8 }}
+        app: physim
     spec:
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
@@ -28,18 +20,23 @@ spec:
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
         env:
         - name: OPENAIR_DIR
           value: /opt/oai-physim
         command: ["/bin/sh", "-c"]
         args:
-        - >  
+        - >
           cmake_targets/autotests/run_exec_autotests.bash -g "ulsim" -d bin/ &&
           echo "FINISHED" && sleep infinity
       dnsPolicy: ClusterFirst
-      restartPolicy: Always
+      restartPolicy: Never
       schedulerName: default-scheduler
       serviceAccountName: {{ .Values.global.serviceAccountName }}
       terminationGracePeriodSeconds: 30
+      {{- if .Values.global.nodeSelector}}
+      nodeSelector:
+         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
+      {{- end }}
+      {{- if .Values.global.nodeName.ulsim}}
+      nodeName: {{ .Values.global.nodeName.ulsim }}
+      {{- end }}

charts/physims/charts/ulsim/templates/service.yaml

@@ -1,20 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Chart.Name }}
-  labels:
-    {{- include "oai-ulsim.labels" . | nindent 4 }}
-spec:
-  type: {{ .Values.service.type }}
-{{- if  contains "ClusterIP" .Values.service.type }}
-  clusterIP: None
-{{- end }}
-  ports:
-    - name: oai-ulsim
-      # Port accessible outside cluster
-      port: {{ .Values.service.port }}
-      # Port to forward to inside the pod
-      targetPort: {{ .Values.service.Port }}
-      protocol: TCP
-  selector:
-    {{- include "oai-ulsim.selectorLabels" . | nindent 4 }}

charts/physims/charts/ulsim/values.yaml

@@ -27,19 +27,7 @@ podSecurityContext:
   runAsGroup: 0
 
 securityContext:
-  privileged: true
-  capabilities:
-    add:
-      - SYS_CAP_PTRACE
-  #   drop:
-  #   - ALL
-  # readOnlyRootFilesystem: true
-  # runAsNonRoot: true
-  # runAsUser: 1000
-
-service:
-  type: ClusterIP
-  port: 80
+  privileged: false
 
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious

charts/physims/templates/rbac.yaml

@@ -6,7 +6,7 @@ rules:
 - apiGroups:
   - security.openshift.io
   resourceNames:
-  - privileged
+  - anyuid
   resources:
   - securitycontextconstraints
   verbs:

charts/physims/templates/serviceaccount.yaml

@@ -1,4 +1,4 @@
 apiVersion: v1
 kind: ServiceAccount
 metadata:
-  name: {{ .Values.global.serviceAccountName }}
+  name: oai-physim-sa #{{ .Values.global.serviceAccountName }}

charts/physims/values.yaml

@@ -5,137 +5,35 @@
 global:
   serviceAccountName: oai-physim-sa
   namespace: "OAICICD_PROJECT"
-  image:
+  image: 
     registry: local
     repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran/oai-physim
     version: TAG
     # pullPolicy: IfNotPresent or Never or Always
     pullPolicy: Always
-
-## Declaring values specific to coressponding physim to overwrite
-
-dlsim.basic:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-dlsim.100rb+tm2:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-ulsim:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-ldpctest:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-polartest:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-pbchsim.106rb:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-pbchsim.217rb:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-pbchsim.273rb:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-dlsim.basic:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-dlsim.dmrs+ptrs:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-dlsim.mcs+mimo:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-dlsim.offset:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-dlschsim:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-smallblocktest:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-ulschsim:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-pucchsim:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-ulsim.3gpp:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-ulsim.mimo:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-ulsim.misc:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-ulsim.sc-fdma:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
-
-nr-prachsim:
-  replicaCount: 1
-  service:
-    type: ClusterIP
-    port: 80
+  # removing the node selector
+  nodeSelector: {}
+  # It is not a good way of assigning pods to the nodes: this way we bypass the scheduler. At the moment we don't provide the resource information of these pods.
+  # Therefore, Openshift assigns the pods to the same node because it thinks the pods don't consume much resources. This isn't the case, they consume a lot of resources.
+  nodeName:
+    dlsim100rbtm2: acamas
+    dlsimbasic: acamas
+    ldpctest: acamas
+    nrdlschsim: acamas
+    nrdlsimbasic: acamas
+    nrdlsimdmrsptrs: acamas
+    nrdlsimmcsmimo: acamas
+    nrdlsimoffset: dedale
+    nrpbschsim106rb: dedale
+    nrpbchsim217rb: dedale
+    nrpbchsim273rb: dedale
+    nrprachsim: dedale
+    nrpucchsim: dedale
+    nrulschsim: theseus
+    nrulsim3gpp: theseus
+    nrulsimmimo: theseus
+    nrulsimmisc: theseus
+    nrulsimscfdma: theseus
+    polartest: theseus
+    smallblocktest: theseus
+    ulsim: theseus

ci-scripts/Jenkinsfile-GitLab-Container

@@ -285,6 +285,46 @@ pipeline {
             }
           }
         }
+        stage ("LTE-B200-FDD-LTEBOX-Container") {
+          when { expression {do4Gtest} }
+          steps {
+            script {
+              triggerSlaveJob ('RAN-LTE-FDD-LTEBOX-Container', 'RAN-LTE-FDD-LTEBOX-Container')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-LTE-FDD-LTEBOX-Container')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
+        stage ("LTE-B200-TDD-LTEBOX-Container") {
+          when { expression {do4Gtest} }
+          steps {
+            script {
+              triggerSlaveJob ('RAN-LTE-TDD-LTEBOX-Container', 'RAN-LTE-TDD-LTEBOX-Container')
+            }
+          }
+          post {
+            always {
+              script {
+                finalizeSlaveJob('RAN-LTE-TDD-LTEBOX-Container')
+              }
+            }
+            failure {
+              script {
+                currentBuild.result = 'FAILURE'
+              }
+            }
+          }
+        }
         stage ("NSA-B200-Module-LTEBOX-Container") {
           when { expression {do4Gtest || do5Gtest} }
           steps {
@@ -409,6 +449,10 @@ pipeline {
         def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ")"
         if ("MERGE".equals(env.gitlabActionType)) {
           addGitLabMRComment comment: message
+          def message2 = message + " -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
+          sendSocialMediaMessage('ci-enb', 'good', message2)
+        } else {
+          sendSocialMediaMessage('ci-enb', 'good', message)
         }
         echo "Pipeline is SUCCESSFUL"
       }
@@ -418,6 +462,10 @@ pipeline {
         def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ")"
         if ("MERGE".equals(env.gitlabActionType)) {
           addGitLabMRComment comment: message
+          def message2 = message + " -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
+          sendSocialMediaMessage('ci-enb', 'danger', message2)
+        } else {
+          sendSocialMediaMessage('ci-enb', 'danger', message)
         }
         echo "Pipeline FAILED"
       }
@@ -501,3 +549,9 @@ def finalizeSlaveJob(jobName) {
     }
   }
 }
+
+// Abstraction function to send social media messages:
+// like on Slack or Mattermost
+def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
+  slackSend channel: pipeChannel, color: pipeColor, message: pipeMessage
+}

ci-scripts/Jenkinsfile-gitlab

@@ -20,16 +20,6 @@
  *      contact@openairinterface.org
  */
 
-// Abstraction function to send social media messages:
-// like on Slack or Mattermost
-def sendSocialMediaMessage(pipeChannel, pipeColor, pipeMessage) {
-    if (params.pipelineUsesSlack != null) {
-        if (params.pipelineUsesSlack) {
-            slackSend channel: pipeChannel, color: pipeColor, message: pipeMessage
-        }
-    }
-}
-
 // Location of the executor node
 def nodeExecutor = params.nodeExecutor
 
@@ -64,10 +54,6 @@ pipeline {
                         echo "Platform is ${env.TESTPLATFORM_OWNER}"
                     }
 
-                    if (fileExists("flexran")) {
-                        sh "rm -Rf flexran > /dev/null 2>&1"
-                    }
-
                     echo '\u2705 \u001B[32mVerify Labels\u001B[0m'
                     if ("MERGE".equals(env.gitlabActionType)) {
                         LABEL_CHECK = sh returnStdout: true, script: 'ci-scripts/checkGitLabMergeRequestLabels.sh --mr-id ' + env.gitlabMergeRequestIid
@@ -342,7 +328,7 @@ pipeline {
                     script {
                       if (doMandatoryTests) {
                         dir ('archives') {
-                            sh "if [ -d rf_sim/test ] || [ -d l2_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
+                            sh "if [ -d rf_sim/test ] || [ -d rf5g_sim/test ] || [ -d l2_sim/test ]; then zip -r -qq vm_tests_logs.zip */test ; fi"
                         }
                         if(fileExists('archives/vm_tests_logs.zip')) {
                             archiveArtifacts artifacts: 'archives/vm_tests_logs.zip'
@@ -389,10 +375,6 @@ OAI CI Team''',
                 if ("MERGE".equals(env.gitlabActionType)) {
                     echo "This is a MERGE event"
                     addGitLabMRComment comment: message
-                    def message2 = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ") -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
-                    sendSocialMediaMessage('ci-enb', 'good', message2)
-                } else {
-                    sendSocialMediaMessage('ci-enb', 'good', message)
                 }
             }
         }
@@ -402,10 +384,6 @@ OAI CI Team''',
                 if ("MERGE".equals(env.gitlabActionType)) {
                     echo "This is a MERGE event"
                     addGitLabMRComment comment: message
-                    def message2 = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ") -- MergeRequest #" + env.gitlabMergeRequestIid + " (" + env.gitlabMergeRequestTitle + ")"
-                    sendSocialMediaMessage('ci-enb', 'danger', message2)
-                } else {
-                    sendSocialMediaMessage('ci-enb', 'danger', message)
                 }
             }
         }

ci-scripts/Jenkinsfile-push-registry

@@ -65,19 +65,38 @@ pipeline {
           WEEK_REF = WEEK_REF.trim()
           WEEK_TAG = sh returnStdout: true, script: 'python3 ./ci-scripts/provideUniqueImageTag.py --start_tag ' + WEEK_REF
           WEEK_TAG = WEEK_TAG.trim()
+          if ((params.forceTag != null) && (params.tagToUse != null)) {
+            if (params.forceTag) {
+              WEEK_TAG = params.tagToUse
+              echo "Forced Tag is ${WEEK_TAG}"
+            }
+          }
+          WEEK_SHA = sh returnStdout: true, script: 'git log -n1 --pretty=format:"%h" origin/develop | cut -c 1-8'
+          WEEK_SHA = WEEK_SHA.trim()
 
           withCredentials([
             [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.DH_Credentials}", usernameVariable: 'DH_Username', passwordVariable: 'DH_Password']
           ]) {
-            def listOfImages = ["oai-enb", "oai-gnb", "oai-lte-ue", "oai-nr-ue", "proxy"]
+            def listOfImages = ["oai-enb", "oai-gnb", "oai-lte-ue", "oai-nr-ue"]
+            // Logging in on both registries
             sh "docker login -u ${DH_Username} -p ${DH_Password} > /dev/null 2>&1"
+            sh "docker login -u oaicicd -p oaicicd porcepix.sboai.cs.eurecom.fr > /dev/null 2>&1"
             listOfImages.eachWithIndex { item, iindex ->
-              sh "docker image tag ${item}:develop ${DH_Account}/${item}:develop"
-              sh "docker image tag ${item}:develop ${DH_Account}/${item}:${WEEK_TAG}"
+              sh "docker pull --quiet porcepix.sboai.cs.eurecom.fr/${item}:develop-${WEEK_SHA}"
+              sh "docker image tag porcepix.sboai.cs.eurecom.fr/${item}:develop-${WEEK_SHA} ${DH_Account}/${item}:develop"
+              sh "docker image tag porcepix.sboai.cs.eurecom.fr/${item}:develop-${WEEK_SHA} ${DH_Account}/${item}:${WEEK_TAG}"
               sh "docker push --quiet ${DH_Account}/${item}:${WEEK_TAG}"
               sh "docker push --quiet ${DH_Account}/${item}:develop"
-              sh "docker rmi ${DH_Account}/${item}:${WEEK_TAG} ${DH_Account}/${item}:develop"
+              sh "docker rmi ${DH_Account}/${item}:${WEEK_TAG} ${DH_Account}/${item}:develop porcepix.sboai.cs.eurecom.fr/${item}:develop-${WEEK_SHA}"
             }
+            // Proxy is not following the same pattern.
+            sh "docker image tag proxy:develop ${DH_Account}/proxy:develop"
+            sh "docker image tag proxy:develop ${DH_Account}/proxy:${WEEK_TAG}"
+            sh "docker push --quiet ${DH_Account}/proxy:develop"
+            sh "docker push --quiet ${DH_Account}/proxy:${WEEK_TAG}"
+            sh "docker rmi ${DH_Account}/proxy:develop ${DH_Account}/proxy:${WEEK_TAG}"
+            // Logging out on both registries
+            sh "docker logout porcepix.sboai.cs.eurecom.fr > /dev/null 2>&1"
             sh "docker logout > /dev/null 2>&1"
           }
         }
@@ -87,6 +106,8 @@ pipeline {
   post {
     always {
       script {
+        sh "docker logout porcepix.sboai.cs.eurecom.fr > /dev/null 2>&1"
+        sh "docker logout > /dev/null 2>&1"
         echo "End of Registry Push"
       }
     }

ci-scripts/buildOnVM.sh

@@ -62,7 +62,7 @@ function build_on_vm {
     echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
     echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
 
-    if [[ "$VM_NAME" == *"-enb-usrp"* ]] || [[ "$VM_NAME" == *"-cppcheck"* ]] || [[ "$VM_NAME" == *"-phy-sim"* ]] || [[ "$VM_NAME" == *"-basic-sim"* ]] || [[ "$VM_NAME" == *"-flexran-rtc"* ]]
+    if [[ "$VM_NAME" == *"-enb-usrp"* ]] || [[ "$VM_NAME" == *"-cppcheck"* ]] || [[ "$VM_NAME" == *"-phy-sim"* ]] || [[ "$VM_NAME" == *"-basic-sim"* ]] || [[ "$VM_NAME" == *"-flexran-rtc"* ]] || [[ "$VM_NAME" == *"-rf-sim"* ]] || [[ "$VM_NAME" == *"-ethernet"* ]] || [[ "$VM_NAME" == *"rf5g-sim"* ]] || [[ "$VM_NAME" == *"gnb-usrp"* ]] || [[ "$VM_NAME" == *"nr-ue-usrp"* ]]
     then
         echo "This VM type is no longer supported in the pipeline framework"
         return

ci-scripts/checkAddedWarnings.sh

@@ -110,7 +110,7 @@ MODIFIED_FILES=`git log $TARGET_INIT_COMMIT..$MERGE_COMMMIT --oneline --name-sta
 NB_WARNINGS_FILES=0
 
 # Retrieve list of warnings 
-LIST_WARNING_FILES=`egrep "error:|warning:" archives/*/*.txt | egrep -v "jobserver unavailable|Clock skew detected.|flexran.proto" | sed -e "s#^.*/home/ubuntu/tmp/##" -e "s#^.*/tmp/CI-eNB/##" -e "s#common/utils/.*/itti#common/utils/itti#" | awk -F ":" '{print $1}' | sort | uniq`
+LIST_WARNING_FILES=`egrep "error:|warning:" archives/*/*.txt | egrep -v "jobserver unavailable|Clock skew detected." | sed -e "s#^.*/home/ubuntu/tmp/##" -e "s#^.*/tmp/CI-eNB/##" -e "s#common/utils/.*/itti#common/utils/itti#" | awk -F ":" '{print $1}' | sort | uniq`
 
 echo ""
 echo "List of files that have been modified by the Merge Request AND"

ci-scripts/checkGitLabMergeRequestLabels.sh

@@ -97,7 +97,7 @@ fi
 if [ $IS_MR_4G -eq 1 ]
 then
     echo "SHORTEN-4G"
-    exit 1
+    exit 0
 fi
 
 # 5G is present: run only 5G
@@ -118,5 +118,5 @@ fi
 if [ $IS_MR_DOCUMENTATION -eq 1 ]
 then
     echo "documentation"
-    exit 1
+    exit 0
 fi

ci-scripts/cls_amarisoft_ue.py

@@ -61,7 +61,7 @@ class AS_UE:
 	def KillASUE(self):
 		mySSH = sshconnection.SSHConnection()
 		mySSH.open(self.HostIPAddress, self.HostUsername, self.HostPassword)
-		mySSH.command('killall --signal SIGKILL lteue-avx2', '#', 5)
+		mySSH.command('killall --signal SIGKILL lteue-avx2', '\$', 5)
 		mySSH.close()
 
 	def RunScenario(self):
@@ -70,10 +70,10 @@ class AS_UE:
 
 		logging.debug("Deleting old artifacts :")
 		cmd='rm -rf ' + self.Ping + ' ' + self.UELog 
-		mySSH.command(cmd,'#',5)
+		mySSH.command(cmd, '\$',5)
 		logging.debug("Running scenario :")
 		cmd='echo $USER; nohup '+self.Cmd + ' ' + self.Config + ' &'
-		mySSH.command(cmd,'#',5)
+		mySSH.command(cmd, '\$',5)
 
 		mySSH.close()
 

ci-scripts/cls_cluster.py

@@ -70,7 +70,7 @@ class Cluster:
 		regres2 = re.search(r"/etc/pki/entitlement/[0-9]+-key.pem", sshSession.getBefore())
 		if regres1 is None or regres2 is None:
 			logging.error("could not find entitlements")
-			return false
+			return False
 		file1 = regres1.group(0)
 		file2 = regres2.group(0)
 		sshSession.command(f'oc create secret generic etc-pki-entitlement --from-file {file1} --from-file {file2}', '\$', 5)
@@ -262,7 +262,7 @@ class Cluster:
 			attemptedImages += ['ran-base']
 			status = ranbase_job is not None and self._wait_build_end(mySSH, [ranbase_job], 600)
 			if not status: logging.error('failure during build of ran-base')
-			mySSH.command(f'oc logs {ranbase_job} > cmake_targets/log/ran-base.log', '\$', 10)
+			mySSH.command(f'oc logs {ranbase_job} &> cmake_targets/log/ran-base.log', '\$', 10)
 			# recover logs by mounting image
 			self._retag_image_statement(mySSH, 'ran-base', 'ran-base', baseTag, 'openshift/ran-base-log-retrieval.yaml')
 			pod = self._deploy_pod(mySSH, 'openshift/ran-base-log-retrieval.yaml')
@@ -289,8 +289,9 @@ class Cluster:
 			wait = ranbuild_job is not None and physim_job is not None and self._wait_build_end(mySSH, [ranbuild_job, physim_job], 1200)
 			if not wait: logging.error('error during build of ranbuild_job or physim_job')
 			status = status and wait
-			mySSH.command(f'oc logs {ranbuild_job} > cmake_targets/log/ran-build.log', '\$', 10)
-			mySSH.command(f'oc logs {physim_job} > cmake_targets/log/oai-physim.log', '\$', 10)
+			mySSH.command(f'oc logs {ranbuild_job} &> cmake_targets/log/ran-build.log', '\$', 10)
+			mySSH.command(f'oc logs {physim_job} &> cmake_targets/log/oai-physim.log', '\$', 10)
+			mySSH.command('oc get pods.metrics.k8s.io >> cmake_targets/log/build-metrics.log', '\$', 10)
 
 		if status:
 			self._recreate_is_tag(mySSH, 'oai-enb', imageTag, 'openshift/oai-enb-is.yaml')
@@ -318,9 +319,9 @@ class Cluster:
 			if not wait: logging.error('error during build of eNB/gNB')
 			status = status and wait
 			# recover logs
-			mySSH.command(f'oc logs {enb_job} > cmake_targets/log/oai-enb.log', '\$', 10)
-			mySSH.command(f'oc logs {gnb_job} > cmake_targets/log/oai-gnb.log', '\$', 10)
-			mySSH.command(f'oc logs {gnb_aw2s_job} > cmake_targets/log/oai-gnb-aw2s.log', '\$', 10)
+			mySSH.command(f'oc logs {enb_job} &> cmake_targets/log/oai-enb.log', '\$', 10)
+			mySSH.command(f'oc logs {gnb_job} &> cmake_targets/log/oai-gnb.log', '\$', 10)
+			mySSH.command(f'oc logs {gnb_aw2s_job} &> cmake_targets/log/oai-gnb-aw2s.log', '\$', 10)
 
 			self._recreate_is_tag(mySSH, 'oai-lte-ue', imageTag, 'openshift/oai-lte-ue-is.yaml')
 			self._recreate_bc(mySSH, 'oai-lte-ue', imageTag, 'openshift/oai-lte-ue-bc.yaml')
@@ -340,8 +341,9 @@ class Cluster:
 			if not wait: logging.error('error during build of lteUE/nrUE')
 			status = status and wait
 			# recover logs
-			mySSH.command(f'oc logs {lteue_job} > cmake_targets/log/oai-lte-ue.log', '\$', 10)
-			mySSH.command(f'oc logs {nrue_job} > cmake_targets/log/oai-nr-ue.log', '\$', 10)
+			mySSH.command(f'oc logs {lteue_job} &> cmake_targets/log/oai-lte-ue.log', '\$', 10)
+			mySSH.command(f'oc logs {nrue_job} &> cmake_targets/log/oai-nr-ue.log', '\$', 10)
+			mySSH.command('oc get pods.metrics.k8s.io >> cmake_targets/log/build-metrics.log', '\$', 10)
 
 		# split and analyze logs
 		imageSize = {}
@@ -359,7 +361,8 @@ class Cluster:
 			logging.info(f'\u001B[1m{image} size is {imageSize[image]}\u001B[0m')
 
 		grep_exp = "\|".join(attemptedImages)
-		mySSH.command(f'oc get images | grep -e \'{grep_exp}\' > cmake_targets/log/image_registry.log', '\$', 10);
+		mySSH.command(f'oc get images | grep -e \'{grep_exp}\' &> cmake_targets/log/image_registry.log', '\$', 10);
+		mySSH.command('for pod in $(oc get pods | tail -n +2 | awk \'{print $1}\'); do oc get pod $pod -o json >> cmake_targets/log/build_pod_summary.log; done', '\$', 60)
 
 		build_log_name = f'build_log_{self.testCase_id}'
 		cls_containerize.CopyLogsToExecutor(mySSH, lSourcePath, build_log_name, lIpAddr, 'oaicicd', CONST.CI_NO_PASSWORD)

ci-scripts/cls_containerize.py

@@ -81,7 +81,7 @@ def CreateWorkspace(sshSession, sourcePath, ranRepository, ranCommitID, ranTarge
 		if ranTargetBranch == '':
 			ranTargetBranch = 'develop'
 		logging.debug(f'Merging with the target branch: {ranTargetBranch}')
-		sshSession.command(f'git merge --ff origin/{ranTargetBranch} -m "Temporary merge for CI"', '\$', 5)
+		sshSession.command(f'git merge --ff origin/{ranTargetBranch} -m "Temporary merge for CI"', '\$', 30)
 
 def CopyLogsToExecutor(sshSession, sourcePath, log_name, scpIp, scpUser, scpPw):
 	sshSession.command(f'cd {sourcePath}/cmake_targets', '\$', 5)
@@ -151,6 +151,97 @@ def AnalyzeBuildLogs(buildRoot, images, globalStatus):
 		collectInfo[image] = files
 	return collectInfo
 
+def AnalyzeIperf(cliOptions, clientReport, serverReport):
+	req_bw = 1.0 # default iperf throughput, in Mbps
+	result = re.search('-b *(?P<iperf_bandwidth>[0-9\.]+)(?P<magnitude>[kKMG])', cliOptions)
+	if result is not None:
+		req_bw = float(result.group('iperf_bandwidth'))
+		magn = result.group('magnitude')
+		if magn == "k" or magn == "K":
+			req_bw /= 1000
+		elif magn == "G":
+			req_bw *= 1000
+	req_dur = 10 # default iperf send duration
+	result = re.search('-t *(?P<duration>[0-9]+)', cliOptions)
+	if result is not None:
+		req_dur = int(result.group('duration'))
+
+	reportLine = None
+	# find server report in client status
+	clientReportLines = clientReport.split('\n')
+	for l in range(len(clientReportLines)):
+		res = re.search('read failed: Connection refused', clientReportLines[l])
+		if res is not None:
+			message = 'iperf connection refused by server!'
+			logging.error(f'\u001B[1;37;41mIperf Test FAIL: {message}\u001B[0m')
+			return (False, message)
+		res = re.search('Server Report:', clientReportLines[l])
+		if res is not None and l + 1 < len(clientReportLines):
+			reportLine = clientReportLines[l+1]
+			logging.debug(f'found server report: "{reportLine}"')
+
+	statusTemplate = '(?:|\[ *\d+\].*) +0\.0-\s*(?P<duration>[0-9\.]+) +sec +[0-9\.]+ [kKMG]Bytes +(?P<bitrate>[0-9\.]+) (?P<magnitude>[kKMG])bits\/sec +(?P<jitter>[0-9\.]+) ms +(\d+\/ ..\d+) +(\((?P<packetloss>[0-9\.]+)%\))'
+	# if we do not find a server report in the client logs, check the server logs
+	# and use the last line which is typically close/identical to server report
+	if reportLine is None:
+		for l in serverReport.split('\n'):
+			res = re.search(statusTemplate, l)
+			if res is not None:
+				reportLine = l
+		if reportLine is None:
+			logging.warning('no report in server status found!')
+			return (False, 'could not parse iperf logs')
+		logging.debug(f'found client status: {reportLine}')
+
+	result = re.search(statusTemplate, reportLine)
+	if result is None:
+		logging.error('could not analyze report from statusTemplate')
+		return (False, 'could not parse iperf logs')
+
+	duration = float(result.group('duration'))
+	bitrate = float(result.group('bitrate'))
+	magn = result.group('magnitude')
+	if magn == "k" or magn == "K":
+		bitrate /= 1000
+	elif magn == "G": # we assume bitrate in Mbps, therefore it must be G now
+		bitrate *= 1000
+	jitter = float(result.group('jitter'))
+	packetloss = float(result.group('packetloss'))
+
+	logging.debug('\u001B[1;37;44m iperf result \u001B[0m')
+	msg = f'Req Bitrate: {req_bw}'
+	logging.debug(f'\u001B[1;34m{msg}\u001B[0m')
+
+	br_loss = bitrate/req_bw
+	bmsg = f'Bitrate    : {bitrate} (perf {br_loss})'
+	logging.debug(f'\u001B[1;34m{bmsg}\u001B[0m')
+	msg += '\n' + bmsg
+	if br_loss < 0.9:
+		msg += '\nBitrate performance too low (<90%)'
+		logging.debug(f'\u001B[1;37;41mBitrate performance too low (<90%)\u001B[0m')
+		return (False, msg)
+
+	plmsg = f'Packet Loss: {packetloss}%'
+	logging.debug(f'\u001B[1;34m{plmsg}\u001B[0m')
+	msg += '\n' + plmsg
+	if packetloss > 5.0:
+		msg += '\nPacket Loss too high!'
+		logging.debug(f'\u001B[1;37;41mPacket Loss too high \u001B[0m')
+		return (False, msg)
+
+	dmsg = f'Duration   : {duration} (req {req_dur})'
+	logging.debug(f'\u001B[1;34m{dmsg}\u001B[0m')
+	msg += '\n' + dmsg
+	if duration < float(req_dur):
+		msg += '\nDuration of iperf too short!'
+		logging.debug(f'\u001B[1;37;41mDuration of iperf too short\u001B[0m')
+		return (False, msg)
+
+	jmsg = f'Jitter     : {jitter}'
+	logging.debug(f'\u001B[1;34m{jmsg}\u001B[0m')
+	msg += '\n' + jmsg
+	return (True, msg)
+
 #-----------------------------------------------------------
 # Class Declaration
 #-----------------------------------------------------------
@@ -188,8 +279,6 @@ class Containerize():
 
 		self.testCase_id = ''
 
-		self.flexranCtrlDeployed = False
-		self.flexranCtrlIpAddress = ''
 		self.cli = ''
 		self.cliBuildOptions = ''
 		self.dockerfileprefix = ''
@@ -208,6 +297,7 @@ class Containerize():
 		self.imageToCopy = ''
 		self.registrySvrId = ''
 		self.testSvrId = ''
+		self.imageToPull = []
 
 		#checkers from xml
 		self.ran_checkers={}
@@ -547,72 +637,194 @@ class Containerize():
 		HTML.CreateHtmlTestRow('commit ' + tag, 'OK', CONST.ALL_PROCESSES_OK)
 		HTML.CreateHtmlNextTabHeaderTestRow(collectInfo, allImagesSize)
 
-	def Copy_Image_to_Test_Server(self, HTML):
-		imageTag = 'develop'
-		if (self.ranAllowMerge):
-			imageTag = 'ci-temp'
+	def ImageTagToUse(self, imageName):
+		shortCommit = self.ranCommitID[0:8]
+		if self.ranAllowMerge:
+			tagToUse = f'{self.ranBranch}-{shortCommit}'
+		else:
+			tagToUse = f'develop-{shortCommit}'
+		fullTag = f'porcepix.sboai.cs.eurecom.fr/{imageName}:{tagToUse}'
+		return fullTag
 
-		lSsh = SSH.SSHConnection()
-		# Going to the Docker Registry server
+	def Push_Image_to_Local_Registry(self, HTML):
 		if self.registrySvrId == '0':
 			lIpAddr = self.eNBIPAddress
 			lUserName = self.eNBUserName
 			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
 		elif self.registrySvrId == '1':
 			lIpAddr = self.eNB1IPAddress
 			lUserName = self.eNB1UserName
 			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
 		elif self.registrySvrId == '2':
 			lIpAddr = self.eNB2IPAddress
 			lUserName = self.eNB2UserName
 			lPassWord = self.eNB2Password
-		lSsh.open(lIpAddr, lUserName, lPassWord)
-		lSsh.command('docker save ' + self.imageToCopy + ':' + imageTag + ' | gzip --fast > ' + self.imageToCopy + '-' + imageTag + '.tar.gz', '\$', 60)
-		ret = lSsh.copyin(lIpAddr, lUserName, lPassWord, '~/' + self.imageToCopy + '-' + imageTag + '.tar.gz', '.')
-		if ret != 0:
-			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ALL_PROCESSES_OK)
-			self.exitStatus = 1
-			return False
-		lSsh.command('rm ' + self.imageToCopy + '-' + imageTag + '.tar.gz', '\$', 60)
-		if lSsh.getBefore().count('cannot remove'):
-			HTML.CreateHtmlTestRow('file not created by docker save', 'KO', CONST.ALL_PROCESSES_OK)
-			self.exitStatus = 1
-			return False
-		lSsh.close()
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		logging.debug('Pushing images from server: ' + lIpAddr)
+		mySSH = SSH.SSHConnection()
+		mySSH.open(lIpAddr, lUserName, lPassWord)
 
-		# Going to the Test Server
+		mySSH.command('docker login -u oaicicd -p oaicicd porcepix.sboai.cs.eurecom.fr', '\$', 5)
+		if re.search('Login Succeeded', mySSH.getBefore()) is None:
+			msg = 'Could not log into local registry'
+			logging.error(msg)
+			mySSH.close()
+			HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
+			return False
+
+		orgTag = 'develop'
+		if self.ranAllowMerge:
+			orgTag = 'ci-temp'
+		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru']
+		for image in imageNames:
+			tagToUse = self.ImageTagToUse(image)
+			mySSH.command(f'docker image tag {image}:{orgTag} {tagToUse}', '\$', 5)
+			mySSH.command(f'docker push {tagToUse}', '\$', 120)
+			if re.search(': digest:', mySSH.getBefore()) is None:
+				logging.debug(mySSH.getBefore())
+				msg = f'Could not push {image} to local registry : {tagToUse}'
+				logging.error(msg)
+				mySSH.close()
+				HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
+				return False
+			mySSH.command(f'docker rmi {tagToUse} {image}:{orgTag}', '\$', 30)
+
+		mySSH.command('docker logout porcepix.sboai.cs.eurecom.fr', '\$', 5)
+		if re.search('Removing login credentials', mySSH.getBefore()) is None:
+			msg = 'Could not log off from local registry'
+			logging.error(msg)
+			mySSH.close()
+			HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
+			return False
+
+		mySSH.close()
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		return True
+
+	def Pull_Image_from_Local_Registry(self, HTML):
+		# This method can be called either onto a remote server (different from python executor)
+		# or directly on the python executor (ie lIpAddr == 'none')
 		if self.testSvrId == '0':
 			lIpAddr = self.eNBIPAddress
 			lUserName = self.eNBUserName
 			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
 		elif self.testSvrId == '1':
 			lIpAddr = self.eNB1IPAddress
 			lUserName = self.eNB1UserName
 			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
 		elif self.testSvrId == '2':
 			lIpAddr = self.eNB2IPAddress
 			lUserName = self.eNB2UserName
 			lPassWord = self.eNB2Password
-		lSsh.open(lIpAddr, lUserName, lPassWord)
-		lSsh.copyout(lIpAddr, lUserName, lPassWord, './' + self.imageToCopy + '-' + imageTag + '.tar.gz', '~')
-		# copyout has no return code and will quit if something fails
-		lSsh.command('docker rmi ' + self.imageToCopy + ':' + imageTag, '\$', 10)
-		lSsh.command('docker load < ' + self.imageToCopy + '-' + imageTag + '.tar.gz', '\$', 60)
-		if lSsh.getBefore().count('o such file') or lSsh.getBefore().count('invalid tar header'):
-			logging.debug(lSsh.getBefore())
-			HTML.CreateHtmlTestRow('problem during docker load', 'KO', CONST.ALL_PROCESSES_OK)
-			self.exitStatus = 1
-			return False
-		lSsh.command('rm ' + self.imageToCopy + '-' + imageTag + '.tar.gz', '\$', 60)
-		if lSsh.getBefore().count('cannot remove'):
-			HTML.CreateHtmlTestRow('file not copied during scp?', 'KO', CONST.ALL_PROCESSES_OK)
-			self.exitStatus = 1
-			return False
-		lSsh.close()
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		if lIpAddr != 'none':
+			logging.debug('Pulling images onto server: ' + lIpAddr)
+			mySSH = SSH.SSHConnection()
+			mySSH.open(lIpAddr, lUserName, lPassWord)
+		else:
+			logging.debug('Pulling images locally')
 
-		if os.path.isfile('./' + self.imageToCopy + '-' + imageTag + '.tar.gz'):
-			os.remove('./' + self.imageToCopy + '-' + imageTag + '.tar.gz')
+		cmd = 'docker login -u oaicicd -p oaicicd porcepix.sboai.cs.eurecom.fr'
+		if lIpAddr != 'none':
+			mySSH.command(cmd, '\$', 5)
+			response = mySSH.getBefore()
+		else:
+			logging.info(cmd)
+			response = subprocess.check_output(cmd, shell=True, universal_newlines=True, stderr=subprocess.STDOUT)
+		if re.search('Login Succeeded', response) is None:
+			msg = 'Could not log into local registry'
+			logging.error(msg)
+			if lIpAddr != 'none':
+				mySSH.close()
+			HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
+			return False
 
+		for image in self.imageToPull:
+			tagToUse = self.ImageTagToUse(image)
+			cmd = f'docker pull {tagToUse}'
+			if lIpAddr != 'none':
+				mySSH.command(cmd, '\$', 120)
+				response = mySSH.getBefore()
+			else:
+				logging.info(cmd)
+				response = subprocess.check_output(cmd, shell=True, universal_newlines=True)
+			if re.search('Status: Downloaded newer image for |Status: Image is up to date for', response) is None:
+				logging.debug(response)
+				msg = f'Could not pull {image} from local registry : {tagToUse}'
+				logging.error(msg)
+				if lIpAddr != 'none':
+					mySSH.close()
+				HTML.CreateHtmlTestRow('msg', 'KO', CONST.ALL_PROCESSES_OK)
+				return False
+
+		cmd = 'docker logout porcepix.sboai.cs.eurecom.fr'
+		if lIpAddr != 'none':
+			mySSH.command(cmd, '\$', 5)
+			response = mySSH.getBefore()
+		else:
+			logging.info(cmd)
+			response = subprocess.check_output(cmd, shell=True, universal_newlines=True)
+		if re.search('Removing login credentials', response) is None:
+			msg = 'Could not log off from local registry'
+			logging.error(msg)
+			mySSH.close()
+			HTML.CreateHtmlTestRow(msg, 'KO', CONST.ALL_PROCESSES_OK)
+			return False
+
+		if lIpAddr != 'none':
+			mySSH.close()
+		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+		return True
+
+	def Clean_Test_Server_Images(self, HTML):
+		# This method can be called either onto a remote server (different from python executor)
+		# or directly on the python executor (ie lIpAddr == 'none')
+		if self.testSvrId == '0':
+			lIpAddr = self.eNBIPAddress
+			lUserName = self.eNBUserName
+			lPassWord = self.eNBPassword
+			lSourcePath = self.eNBSourceCodePath
+		elif self.testSvrId == '1':
+			lIpAddr = self.eNB1IPAddress
+			lUserName = self.eNB1UserName
+			lPassWord = self.eNB1Password
+			lSourcePath = self.eNB1SourceCodePath
+		elif self.testSvrId == '2':
+			lIpAddr = self.eNB2IPAddress
+			lUserName = self.eNB2UserName
+			lPassWord = self.eNB2Password
+			lSourcePath = self.eNB2SourceCodePath
+		if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '':
+			HELP.GenericHelp(CONST.Version)
+			sys.exit('Insufficient Parameter')
+		if lIpAddr != 'none':
+			logging.debug('Removing test images from server: ' + lIpAddr)
+			mySSH = SSH.SSHConnection()
+			mySSH.open(lIpAddr, lUserName, lPassWord)
+		else:
+			logging.debug('Removing test images locally')
+
+		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru']
+		for image in imageNames:
+			cmd = f'docker rmi {self.ImageTagToUse(image)} || true'
+			if lIpAddr != 'none':
+				mySSH.command(cmd, '\$', 5)
+			else:
+				logging.info(cmd)
+				subprocess.run(cmd, shell=True, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+
+		if lIpAddr != 'none':
+			mySSH.close()
 		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
 		return True
 
@@ -639,39 +851,37 @@ class Containerize():
 
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
-		
+
 		CreateWorkspace(mySSH, lSourcePath, self.ranRepository, self.ranCommitID, self.ranTargetBranch, self.ranAllowMerge)
 
 		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
 		mySSH.command('cp docker-compose.yml ci-docker-compose.yml', '\$', 5)
-		imageTag = 'develop'
-		if (self.ranAllowMerge):
-			imageTag = 'ci-temp'
-		mySSH.command('sed -i -e "s/image: oai-enb:latest/image: oai-enb:' + imageTag + '/" ci-docker-compose.yml', '\$', 2)
-		mySSH.command('sed -i -e "s/image: oai-gnb:latest/image: oai-gnb:' + imageTag + '/" ci-docker-compose.yml', '\$', 2)
+		imagesList = ['oai-enb', 'oai-gnb']
+		for image in imagesList:
+			imageToUse = self.ImageTagToUse(image)
+			mySSH.command(f'sed -i -e "s#image: {image}:latest#image: {imageToUse}#" ci-docker-compose.yml', '\$', 2)
 		localMmeIpAddr = EPC.MmeIPAddress
 		mySSH.command('sed -i -e "s/CI_MME_IP_ADDR/' + localMmeIpAddr + '/" ci-docker-compose.yml', '\$', 2)
-#		if self.flexranCtrlDeployed:
-#			mySSH.command('sed -i -e "s/FLEXRAN_ENABLED:.*/FLEXRAN_ENABLED: \'yes\'/" ci-docker-compose.yml', '\$', 2)
-#			mySSH.command('sed -i -e "s/CI_FLEXRAN_CTL_IP_ADDR/' + self.flexranCtrlIpAddress + '/" ci-docker-compose.yml', '\$', 2)
-#		else:
-#			mySSH.command('sed -i -e "s/FLEXRAN_ENABLED:.*$/FLEXRAN_ENABLED: \'no\'/" ci-docker-compose.yml', '\$', 2)
-#			mySSH.command('sed -i -e "s/CI_FLEXRAN_CTL_IP_ADDR/127.0.0.1/" ci-docker-compose.yml', '\$', 2)
+
 		# Currently support only one
 		mySSH.command('echo ' + lPassWord + ' | sudo -S b2xx_fx3_utils --reset-device', '\$', 15)
-		mySSH.command('docker-compose --file ci-docker-compose.yml config --services | sed -e "s@^@service=@" 2>&1', '\$', 10)
-		result = re.search('service=(?P<svc_name>[a-zA-Z0-9\_]+)', mySSH.getBefore())
-		if result is not None:
-			svcName = result.group('svc_name')
-			mySSH.command('docker-compose --file ci-docker-compose.yml up -d ' + svcName, '\$', 15)
+		svcName = self.services[self.eNB_instance]
+		if svcName == '':
+			logging.warning('no service name given: starting all services in ci-docker-compose.yml!')
+
+		mySSH.command(f'docker-compose --file ci-docker-compose.yml up -d -- {svcName}', '\$', 30)
 
 		# Checking Status
-		mySSH.command('docker-compose --file ci-docker-compose.yml config', '\$', 5)
+		grep = ''
+		if svcName != '': grep = f' | grep -A3 {svcName}'
+		mySSH.command(f'docker-compose --file ci-docker-compose.yml config {grep}', '\$', 5)
 		result = re.search('container_name: (?P<container_name>[a-zA-Z0-9\-\_]+)', mySSH.getBefore())
 		unhealthyNb = 0
 		healthyNb = 0
 		startingNb = 0
 		containerName = ''
+		usedImage = ''
+		imageInfo = ''
 		if result is not None:
 			containerName = result.group('container_name')
 			time.sleep(5)
@@ -686,6 +896,20 @@ class Containerize():
 				else:
 					time.sleep(10)
 					cnt += 1
+			mySSH.command('docker inspect --format="ImageUsed: {{.Config.Image}}" ' + containerName, '\$', 5)
+			for stdoutLine in mySSH.getBefore().split('\n'):
+				if stdoutLine.count('ImageUsed: porcepix'):
+					usedImage = stdoutLine.replace('ImageUsed: porcepix', 'porcepix').strip()
+					logging.debug('Used image is ' + usedImage)
+			if usedImage != '':
+				mySSH.command('docker image inspect --format "* Size     = {{.Size}} bytes\n* Creation = {{.Created}}\n* Id       = {{.Id}}" ' + usedImage, '\$', 5, silent=True)
+				for stdoutLine in mySSH.getBefore().split('\n'):
+					if re.search('Size     = [0-9]', stdoutLine) is not None:
+						imageInfo += stdoutLine.strip() + '\n'
+					if re.search('Creation = [0-9]', stdoutLine) is not None:
+						imageInfo += stdoutLine.strip() + '\n'
+					if re.search('Id       = sha256', stdoutLine) is not None:
+						imageInfo += stdoutLine.strip() + '\n'
 		logging.debug(' -- ' + str(healthyNb) + ' healthy container(s)')
 		logging.debug(' -- ' + str(unhealthyNb) + ' unhealthy container(s)')
 		logging.debug(' -- ' + str(startingNb) + ' still starting container(s)')
@@ -710,16 +934,29 @@ class Containerize():
 		else:
 			# containers are unhealthy, so we won't start. However, logs are stored at the end
 			# in UndeployObject so we here store the logs of the unhealthy container to report it
-			logfilename = f'{lSourcePath}/cmake_targets/{self.eNB_logFile[self.eNB_instance]}'
-			mySSH.command('docker logs {containerName} > {logfilename}', '\$', 30)
+			logfilename = f'{lSourcePath}/cmake_targets/log/{self.eNB_logFile[self.eNB_instance]}'
+			mySSH.command(f'docker logs {containerName} > {logfilename}', '\$', 30)
 			mySSH.copyin(lIpAddr, lUserName, lPassWord, logfilename, '.')
 		mySSH.close()
 
+		html_queue = SimpleQueue()
+		html_cell = '<pre style="background-color:white">\n'
+		if usedImage != '':
+			html_cell += f'Used Image = {usedImage} :\n'
+			html_cell += imageInfo
+		else:
+			html_cell += 'Could not retrieve used image info!\n'
 		if status:
-			HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
+			html_cell += '\nHealthy deployment!\n'
+		else:
+			html_cell += '\nUnhealthy deployment! -- Check logs for reason!\n'
+		html_cell += '</pre>'
+		html_queue.put(html_cell)
+		if status:
+			HTML.CreateHtmlTestRowQueue('N/A', 'OK', CONST.ENB_PROCESS_OK, html_queue)
 		else:
 			self.exitStatus = 1
-			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ALL_PROCESSES_OK)
+			HTML.CreateHtmlTestRowQueue('N/A', 'KO', CONST.ENB_PROCESS_OK, html_queue)
 
 
 	def UndeployObject(self, HTML, RAN):
@@ -745,64 +982,73 @@ class Containerize():
 		mySSH = SSH.SSHConnection()
 		mySSH.open(lIpAddr, lUserName, lPassWord)
 		mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5)
-		# Currently support only one
-		mySSH.command('docker-compose --file ci-docker-compose.yml config', '\$', 5)
-		containerName = ''
-		containerToKill = False
-		result = re.search('container_name: (?P<container_name>[a-zA-Z0-9\-\_]+)', mySSH.getBefore())
-		if self.eNB_logFile[self.eNB_instance] == '':
-			self.eNB_logFile[self.eNB_instance] = 'enb_' + HTML.testCase_id + '.log'
-		if result is not None:
-			containerName = result.group('container_name')
-			containerToKill = True
-		if containerToKill:
-			mySSH.command('docker inspect ' + containerName, '\$', 30)
-			result = re.search('Error: No such object: ' + containerName, mySSH.getBefore())
-			if result is not None:
-				containerToKill = False
-		if containerToKill:
-			mySSH.command('docker kill --signal INT ' + containerName, '\$', 30)
-			time.sleep(5)
-			mySSH.command('docker kill --signal KILL ' + containerName, '\$', 30)
-			time.sleep(5)
-			mySSH.command('docker logs ' + containerName + ' > ' + lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '\$', 30)
-			mySSH.command('docker rm -f ' + containerName, '\$', 30)
-		# Forcing the down now to remove the networks and any artifacts
-		mySSH.command('docker-compose --file ci-docker-compose.yml down', '\$', 5)
+
+		svcName = self.services[self.eNB_instance]
+		forceDown = False
+		if svcName != '':
+			logging.warning(f'service name given, but will stop all services in ci-docker-compose.yml!')
+			svcName = ''
+
+		mySSH.command(f'docker-compose -f ci-docker-compose.yml config --services', '\$', 5)
+		# first line has command, last line has next command prompt
+		allServices = mySSH.getBefore().split('\r\n')[1:-1]
+		services = []
+		for s in allServices:
+			mySSH.command(f'docker-compose -f ci-docker-compose.yml ps --all -- {s}', '\$', 5, silent=False)
+			running = mySSH.getBefore().split('\r\n')[3:-1]
+			#logging.debug(f'running services: {running}')
+			if len(running) > 0: # something is running for that service
+				services.append(s)
+		logging.info(f'stopping services {services}')
+
+		mySSH.command(f'docker-compose -f ci-docker-compose.yml stop', '\$', 30)
+		time.sleep(5)  # give some time to running containers to stop
+		for svcName in services:
+			# head -n -1 suppresses the final "X exited with status code Y"
+			filename = f'{svcName}-{HTML.testCase_id}.log'
+			#mySSH.command(f'docker-compose -f ci-docker-compose.yml logs --no-log-prefix -- {svcName} | head -n -1 &> {lSourcePath}/cmake_targets/log/{filename}', '\$', 30)
+			mySSH.command(f'docker-compose -f ci-docker-compose.yml logs --no-log-prefix -- {svcName} &> {lSourcePath}/cmake_targets/log/{filename}', '\$', 120)
+
+		mySSH.command('docker-compose -f ci-docker-compose.yml down', '\$', 5)
 		# Cleaning any created tmp volume
-		mySSH.command('docker volume prune --force || true', '\$', 20)
+		mySSH.command('docker volume prune --force', '\$', 20)
 
 		mySSH.close()
 
 		# Analyzing log file!
-		if containerToKill:
-			copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '.')
-		else:
-			copyin_res = 0
-		nodeB_prefix = 'e'
-		if (copyin_res == -1):
-			HTML.htmleNBFailureMsg='Could not copy ' + nodeB_prefix + 'NB logfile to analyze it!'
+		files = ','.join([f'{s}-{HTML.testCase_id}' for s in services])
+		if len(services) > 1:
+			files = '{' + files + '}'
+		copyin_res = 0
+		if len(services) > 0:
+			copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, f'{lSourcePath}/cmake_targets/log/{files}.log', '.')
+		if copyin_res == -1:
+			HTML.htmleNBFailureMsg='Could not copy logfile to analyze it!'
 			HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
+			self.exitStatus = 1
 		else:
-			if containerToKill:
-				logging.debug('\u001B[1m Analyzing ' + nodeB_prefix + 'NB logfile \u001B[0m ' + self.eNB_logFile[self.eNB_instance])
-				logStatus = RAN.AnalyzeLogFile_eNB(self.eNB_logFile[self.eNB_instance], HTML, self.ran_checkers)
-			else:
-				logStatus = 0
-			if (logStatus < 0):
-				HTML.CreateHtmlTestRow(RAN.runtime_stats, 'KO', logStatus)
-			else:
-				HTML.CreateHtmlTestRow(RAN.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
+			for svcName in services:
+				filename = f'{svcName}-{HTML.testCase_id}.log'
+				logging.debug(f'\u001B[1m Analyzing logfile {filename}\u001B[0m')
+				logStatus = RAN.AnalyzeLogFile_eNB(filename, HTML, self.ran_checkers)
+				if (logStatus < 0):
+					HTML.CreateHtmlTestRow(RAN.runtime_stats, 'KO', logStatus)
+					self.exitStatus = 1
+				else:
+					HTML.CreateHtmlTestRow(RAN.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK)
 			# all the xNB run logs shall be on the server 0 for logCollecting
-			if containerToKill and self.eNB_serverId[self.eNB_instance] != '0':
-				mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './' + self.eNB_logFile[self.eNB_instance], self.eNBSourceCodePath + '/cmake_targets/')
-		logging.info('\u001B[1m Undeploying OAI Object Pass\u001B[0m')
+			if self.eNB_serverId[self.eNB_instance] != '0':
+				mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, f'./{files}.log', f'{self.eNBSourceCodePath}/cmake_targets/')
+		if self.exitStatus == 0:
+			logging.info('\u001B[1m Undeploying OAI Object Pass\u001B[0m')
+		else:
+			logging.error('\u001B[1m Undeploying OAI Object Failed\u001B[0m')
 
 	def DeployGenObject(self, HTML, RAN, UE):
 		self.exitStatus = 0
-		logging.info('\u001B[1m Checking Services to deploy\u001B[0m')
+		logging.debug('\u001B[1m Checking Services to deploy\u001B[0m')
 		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose config --services'
-		logging.debug(cmd)
+		logging.info(cmd)
 		try:
 			listServices = subprocess.check_output(cmd, shell=True, universal_newlines=True)
 		except Exception as e:
@@ -818,15 +1064,17 @@ class Containerize():
 			HTML.CreateHtmlTestRow('SVC not Found', 'KO', CONST.ALL_PROCESSES_OK)
 			return
 
-		if (self.ranAllowMerge):
-			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@ci-temp@" docker-compose.y*ml > docker-compose-ci.yml'
-		else:
-			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@develop@" docker-compose.y*ml > docker-compose-ci.yml'
-		logging.debug(cmd)
+		cmd = 'cd ' + self.yamlPath[0] + ' && cp docker-compose.y*ml docker-compose-ci.yml'
 		subprocess.run(cmd, shell=True)
+		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru']
+		for image in imageNames:
+			tagToUse = self.ImageTagToUse(image)
+			cmd = f'cd {self.yamlPath[0]} && sed -i -e "s@{image}:develop@{tagToUse}@" docker-compose-ci.yml'
+			logging.debug(cmd)
+			subprocess.run(cmd, shell=True)
 
 		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml up -d ' + self.services[0]
-		logging.debug(cmd)
+		logging.info(cmd)
 		try:
 			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
 		except Exception as e:
@@ -835,7 +1083,7 @@ class Containerize():
 			HTML.CreateHtmlTestRow('Could not deploy', 'KO', CONST.ALL_PROCESSES_OK)
 			return
 
-		logging.info('\u001B[1m Checking if all deployed healthy\u001B[0m')
+		logging.debug('\u001B[1m Checking if all deployed healthy\u001B[0m')
 		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml ps -a'
 		count = 0
 		healthy = 0
@@ -930,7 +1178,7 @@ class Containerize():
 		cmd += ' -w /tmp/capture_'
 		ymlPath = self.yamlPath[0].split('/')
 		cmd += ymlPath[1] + '.pcap > /tmp/tshark.log 2>&1 &'
-		logging.debug(cmd)
+		logging.info(cmd)
 		networkNames = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
 		self.tsharkStarted = True
 
@@ -939,22 +1187,24 @@ class Containerize():
 		ymlPath = self.yamlPath[0].split('/')
 		logPath = '../cmake_targets/log/' + ymlPath[1]
 
-		if (self.ranAllowMerge):
-			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@ci-temp@" docker-compose.y*ml > docker-compose-ci.yml'
-		else:
-			cmd = 'cd ' + self.yamlPath[0] + ' && sed -e "s@develop@develop@" docker-compose.y*ml > docker-compose-ci.yml'
-		logging.debug(cmd)
+		cmd = 'cd ' + self.yamlPath[0] + ' && cp docker-compose.y*ml docker-compose-ci.yml'
+		logging.info(cmd)
 		subprocess.run(cmd, shell=True)
+		imageNames = ['oai-enb', 'oai-gnb', 'oai-lte-ue', 'oai-nr-ue', 'oai-lte-ru']
+		for image in imageNames:
+			tagToUse = self.ImageTagToUse(image)
+			cmd = f'cd {self.yamlPath[0]} && sed -i -e "s@{image}:develop@{tagToUse}@" docker-compose-ci.yml'
+			subprocess.run(cmd, shell=True)
 
 		# check which containers are running for log recovery later
 		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml ps --all'
-		logging.debug(cmd)
+		logging.info(cmd)
 		deployStatusLogs = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
 
 		# Stop the containers to shut down objects
 		logging.debug('\u001B[1m Stopping containers \u001B[0m')
 		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml stop'
-		logging.debug(cmd)
+		logging.info(cmd)
 		try:
 			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
 		except Exception as e:
@@ -976,16 +1226,16 @@ class Containerize():
 				anyLogs = True
 				cName = res.group('container_name')
 				cmd = 'cd ' + self.yamlPath[0] + ' && docker logs ' + cName + ' > ' + cName + '.log 2>&1'
-				logging.debug(cmd)
+				logging.info(cmd)
 				subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
 				if re.search('magma-mme', cName) is not None:
 					cmd = 'cd ' + self.yamlPath[0] + ' && docker cp -L ' + cName + ':/var/log/mme.log ' + cName + '-full.log'
-					logging.debug(cmd)
+					logging.info(cmd)
 					subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
 		fullStatus = True
 		if anyLogs:
 			cmd = 'mkdir -p '+ logPath + ' && cp ' + self.yamlPath[0] + '/*.log ' + logPath
-			logging.debug(cmd)
+			logging.info(cmd)
 			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
 
 			# Analyzing log file(s)!
@@ -1035,25 +1285,25 @@ class Containerize():
 						HTML.CreateHtmlTestRow('UE log Analysis', 'OK', CONST.ALL_PROCESSES_OK)
 
 			cmd = 'rm ' + self.yamlPath[0] + '/*.log'
-			logging.debug(cmd)
+			logging.info(cmd)
 			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
 			if self.tsharkStarted:
 				self.tsharkStarted = True
 				ymlPath = self.yamlPath[0].split('/')
 				cmd = 'sudo chmod 666 /tmp/capture_' + ymlPath[1] + '.pcap'
-				logging.debug(cmd)
+				logging.info(cmd)
 				copyStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
 				cmd = 'cp /tmp/capture_' + ymlPath[1] + '.pcap ' + logPath
-				logging.debug(cmd)
+				logging.info(cmd)
 				copyStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
 				cmd = 'sudo rm /tmp/capture_' + ymlPath[1] + '.pcap'
-				logging.debug(cmd)
+				logging.info(cmd)
 				copyStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
 				self.tsharkStarted = False
 
 		logging.debug('\u001B[1m Undeploying \u001B[0m')
 		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml down'
-		logging.debug(cmd)
+		logging.info(cmd)
 		try:
 			deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
 		except Exception as e:
@@ -1066,7 +1316,7 @@ class Containerize():
 		self.deployedContainers = []
 		# Cleaning any created tmp volume
 		cmd = 'docker volume prune --force || true'
-		logging.debug(cmd)
+		logging.info(cmd)
 		deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
 
 		if fullStatus:
@@ -1074,7 +1324,7 @@ class Containerize():
 			logging.info('\u001B[1m Undeploying OAI Object(s) PASS\u001B[0m')
 		else:
 			HTML.CreateHtmlTestRow('n/a', 'KO', CONST.ALL_PROCESSES_OK)
-			logging.info('\u001B[1m Undeploying OAI Object(s) FAIL\u001B[0m')
+			logging.error('\u001B[1m Undeploying OAI Object(s) FAIL\u001B[0m')
 
 	def StatsFromGenObject(self, HTML):
 		self.exitStatus = 0
@@ -1083,7 +1333,7 @@ class Containerize():
 
 		# if the containers are running, recover the logs!
 		cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml ps --all'
-		logging.debug(cmd)
+		logging.info(cmd)
 		deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
 		cmd = 'docker stats --no-stream --format "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.MemPerc}}" '
 		anyLogs = False
@@ -1099,7 +1349,7 @@ class Containerize():
 				cmd += res.group('container_name') + ' '
 		message = ''
 		if anyLogs:
-			logging.debug(cmd)
+			logging.info(cmd)
 			stats = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
 			for statLine in stats.split('\n'):
 				logging.debug(statLine)
@@ -1119,7 +1369,7 @@ class Containerize():
 
 		cmd = 'docker exec ' + self.pingContName + ' /bin/bash -c "ping ' + self.pingOptions + '" 2>&1 | tee ' + logPath + '/ping_' + HTML.testCase_id + '.log || true'
 
-		logging.debug(cmd)
+		logging.info(cmd)
 		deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
 
 		result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', deployStatus)
@@ -1176,15 +1426,15 @@ class Containerize():
 			logging.error('\u001B[1;37;41m ping test FAIL -- ' + message + ' \u001B[0m')
 			HTML.CreateHtmlTestRowQueue(self.pingOptions, 'KO', 1, html_queue)
 			# Automatic undeployment
-			logging.debug('----------------------------------------')
-			logging.debug('\u001B[1m Starting Automatic undeployment \u001B[0m')
-			logging.debug('----------------------------------------')
+			logging.warning('----------------------------------------')
+			logging.warning('\u001B[1m Starting Automatic undeployment \u001B[0m')
+			logging.warning('----------------------------------------')
 			HTML.testCase_id = 'AUTO-UNDEPLOY'
 			HTML.desc = 'Automatic Un-Deployment'
 			self.UndeployGenObject(HTML, RAN, UE)
 			self.exitStatus = 1
 
-	def IperfFromContainer(self, HTML, RAN):
+	def IperfFromContainer(self, HTML, RAN, UE):
 		self.exitStatus = 0
 
 		ymlPath = self.yamlPath[0].split('/')
@@ -1193,112 +1443,38 @@ class Containerize():
 		logStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
 
 		# Start the server process
-		cmd = 'docker exec -d ' + self.svrContName + ' /bin/bash -c "nohup iperf ' + self.svrOptions + ' > /tmp/iperf_server.log 2>&1" || true'
-		logging.debug(cmd)
-		serverStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
-		time.sleep(5)
+		cmd = f'docker exec -d {self.svrContName} /bin/bash -c "nohup iperf {self.svrOptions} > /tmp/iperf_server.log 2>&1"'
+		logging.info(cmd)
+		subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+		time.sleep(3)
 
 		# Start the client process
-
-		cmd = 'docker exec ' + self.cliContName + ' /bin/bash -c "iperf ' + self.cliOptions + '" 2>&1 | tee '+ logPath + '/iperf_client_' + HTML.testCase_id + '.log || true'
-		logging.debug(cmd)
+		cmd = f'docker exec {self.cliContName} /bin/bash -c "iperf {self.cliOptions}" 2>&1 | tee {logPath}/iperf_client_{HTML.testCase_id}.log'
+		logging.info(cmd)
 		clientStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100)
 
 		# Stop the server process
-		cmd = 'docker exec ' + self.svrContName + ' /bin/bash -c "pkill iperf" || true'
-		logging.debug(cmd)
-		serverStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
-		time.sleep(5)
-		cmd = 'docker cp ' + self.svrContName + ':/tmp/iperf_server.log '+ logPath + '/iperf_server_' + HTML.testCase_id + '.log'
-		logging.debug(cmd)
-		serverStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
+		cmd = f'docker exec {self.svrContName} /bin/bash -c "pkill iperf"'
+		logging.info(cmd)
+		subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10)
+		time.sleep(3)
+		serverStatusFilename = f'{logPath}/iperf_server_{HTML.testCase_id}.log'
+		cmd = f'docker cp {self.svrContName}:/tmp/iperf_server.log {serverStatusFilename}'
+		logging.info(cmd)
+		subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30)
 
-		# Analyze client output
-		result = re.search('Server Report:', clientStatus)
-		if result is None:
-			result = re.search('read failed: Connection refused', clientStatus)
-			if result is not None:
-				message = 'Could not connect to iperf server!'
-			else:
-				message = 'Server Report and Connection refused Not Found!'
-			self.IperfExit(HTML, False, message)
-			logging.error('\u001B[1;37;41m Iperf Test FAIL\u001B[0m')
-			return
-
-		# Computing the requested bandwidth in float
-		result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', self.cliOptions)
-		if result is not None:
-			req_bandwidth = result.group('iperf_bandwidth')
-			req_bw = float(req_bandwidth)
-			result = re.search('-b [0-9\.]+K', self.cliOptions)
-			if result is not None:
-				req_bandwidth = '%.1f Kbits/sec' % req_bw
-				req_bw = req_bw * 1000
-			result = re.search('-b [0-9\.]+M', self.cliOptions)
-			if result is not None:
-				req_bandwidth = '%.1f Mbits/sec' % req_bw
-				req_bw = req_bw * 1000000
-
-		reportLine = None
-		reportLineFound = False
-		for iLine in clientStatus.split('\n'):
-			if reportLineFound:
-				reportLine = iLine
-				reportLineFound = False
-			res = re.search('Server Report:', iLine)
-			if res is not None:
-				reportLineFound = True
-		result = None
-		if reportLine is not None:
-			result = re.search('(?:|\[ *\d+\].*) (?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?P<jitter>[0-9\.]+ ms) +(\d+\/ ..\d+) +(\((?P<packetloss>[0-9\.]+)%\))', reportLine)
-		iperfStatus = True
-		if result is not None:
-			bitrate = result.group('bitrate')
-			packetloss = result.group('packetloss')
-			jitter = result.group('jitter')
-			logging.debug('\u001B[1;37;44m iperf result \u001B[0m')
-			iperfStatus = True
-			msg = 'Req Bitrate : ' + req_bandwidth + '\n'
-			logging.debug('\u001B[1;34m    Req Bitrate : ' + req_bandwidth + '\u001B[0m')
-			if bitrate is not None:
-				msg += 'Bitrate     : ' + bitrate + '\n'
-				logging.debug('\u001B[1;34m    Bitrate     : ' + bitrate + '\u001B[0m')
-				result = re.search('(?P<real_bw>[0-9\.]+) [KMG]bits/sec', str(bitrate))
-				if result is not None:
-					actual_bw = float(str(result.group('real_bw')))
-					result = re.search('[0-9\.]+ K', bitrate)
-					if result is not None:
-						actual_bw = actual_bw * 1000
-					result = re.search('[0-9\.]+ M', bitrate)
-					if result is not None:
-						actual_bw = actual_bw * 1000000
-					br_loss = 100 * actual_bw / req_bw
-					if br_loss < 90:
-						iperfStatus = False
-					bitperf = '%.2f ' % br_loss
-					msg += 'Bitrate Perf: ' + bitperf + '%\n'
-					logging.debug('\u001B[1;34m    Bitrate Perf: ' + bitperf + '%\u001B[0m')
-			if packetloss is not None:
-				msg += 'Packet Loss : ' + packetloss + '%\n'
-				logging.debug('\u001B[1;34m    Packet Loss : ' + packetloss + '%\u001B[0m')
-				if float(packetloss) > float(5):
-					msg += 'Packet Loss too high!\n'
-					logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
-					iperfStatus = False
-			if jitter is not None:
-				msg += 'Jitter      : ' + jitter + '\n'
-				logging.debug('\u001B[1;34m    Jitter      : ' + jitter + '\u001B[0m')
-			self.IperfExit(HTML, iperfStatus, msg)
-		else:
-			iperfStatus = False
-			logging.error('problem?')
-			self.IperfExit(HTML, iperfStatus, 'problem?')
+		# clientStatus was retrieved above. The serverStatus was
+		# written in the background, then copied to the local machine
+		with open(serverStatusFilename, 'r') as f:
+			serverStatus = f.read()
+		(iperfStatus, msg) = AnalyzeIperf(self.cliOptions, clientStatus, serverStatus)
 		if iperfStatus:
 			logging.info('\u001B[1m Iperf Test PASS\u001B[0m')
 		else:
 			logging.error('\u001B[1;37;41m Iperf Test FAIL\u001B[0m')
+		self.IperfExit(HTML, RAN, UE, iperfStatus, msg)
 
-	def IperfExit(self, HTML, status, message):
+	def IperfExit(self, HTML, RAN, UE, status, message):
 		html_queue = SimpleQueue()
 		html_cell = '<pre style="background-color:white">UE\n' + message + '</pre>'
 		html_queue.put(html_cell)
@@ -1307,6 +1483,14 @@ class Containerize():
 		else:
 			logging.error('\u001B[1m Iperf Test FAIL -- ' + message + ' \u001B[0m')
 			HTML.CreateHtmlTestRowQueue(self.cliOptions, 'KO', 1, html_queue)
+			# Automatic undeployment
+			logging.warning('----------------------------------------')
+			logging.warning('\u001B[1m Starting Automatic undeployment \u001B[0m')
+			logging.warning('----------------------------------------')
+			HTML.testCase_id = 'AUTO-UNDEPLOY'
+			HTML.desc = 'Automatic Un-Deployment'
+			self.UndeployGenObject(HTML, RAN, UE)
+			self.exitStatus = 1
 
 
 	def CheckAndAddRoute(self, svrName, ipAddr, userName, password):