Integration: `2024.w29`
See merge request oai/openairinterface5g!2867
* !2854 Fix NSA test
* !2715 Aerial multi l2
* !2798 CI: Create Iperf2 unidirectional function
* !2859 Switch to BWP where RA is configured when Msg3 contains MAC CE for C-RNTI
* !2861 7.2 xran: notification generation code in ru_thread excluded from compilation
* !2853 Cleanup executables focusing on NR UE
* !2860 Fix segfault in SRS modulation when ue-nb-ant-tx (fp) does not match UE capabilities
* !2863 Add configuration for CBRS RU
* !2749 immediately reuse UL/DL HARQ ID and don't wait for feedback if disable_harq == 1
* the mismatch between UE capabilities, passed to PHY by NFAPI PDU, and --ue-nb-ant-tx
causes a segfault in SRS modulation
* issue with indexing txdataF[p_index], which fails due to an out-of-bounds access
since first dimension of txdataF is sized based on ue->frame_parms.nb_antennas_tx
* N_ap used in SRS modulation is based on the number of antenna ports
in the SRS configuration (srs_config_pdu->num_ant_ports)
sched_ul_bytes is reduced already in case the last HARQ round fails through handle_nr_ul_harq() -> abort_nr_ul_harq().
Therefore, the reduction in nr_rx_sdu() is wrong, and btw. it wrongly assumes the max. UL HARQ rounds to 4.
So simply remove this peace of code in nr_rx_sdu().
sched_ul_bytes tracks the volume of in-flight data.
When data is successfully received, sched_ul_bytes is decreased in nr_rx_sdu().
In case of reusing HARQ processes, the tb_size stored there is not correct.
Therefore use the actual SDU size instead.
Don't break after first occurence of status template (interval "0.0- 1.0 sec").
With this modification we get final result, which is at the last line of log
(for interval "0.0-30.2 sec").
Remove code related to "rfsim4g_enb_fembms" testcase from Iperf_Module() -
replaced by Iperf2_Unidir(). Use copyin() for both remote and local
commands - no need to check if running on localhost anymore.
Create directory for log collection on executor node -
used for log collection in pipelines running on localhost.
Copy the iperf3 report to the executor machine for log collection.
The report needs to be copied to two different directories to ensure
proper log collection across all pipelines. Using absolute paths
ensures compatibility with both remote and local commands.
making aerial shm prefix configurable (so we can use muliptle VNFs per PNF)
making the nvipc thread affinity configurable and using threadCreate.
removing aerial_vnf_nr_aerial_p7_start_thread
In NSA, the RA process contains the RNTI of the UE to add. The previous
implementation would not remove the RNTI in NSA/for CFRA, which is
unclear (why should it stay? RA is over). Also, we did not clear all
contents, which masked a bug, as we were reusing an RA process for a
subsequent attach, leading to a segfault on reattach. That is fixed in
this commit.
Also, we were using the RA structure after having cleared it in
_nr_rx_sdu(), which semantically makes no sense.
To harmonize handling of the preambles: completely reset the RA
processes inside nr_clear_ra_proc(). For SA, also add the initialization
of allowed preambles.
Finally, this commit fixes a memory leak: we always (also in SA) fill a
list of preambles in a dynamically allocated preamble list. Since the
total list is only up to 64 preambles of 1B each, put it directly into
the struct instead of dynamically allocating it.
Remove the secondaryCellGroup variable in RRC, as it is not used there.
Note that in the case of F1, the secondaryCellGroup entirely belongs to
the DU, i.e., MAC. Also, we don't do anything with it in RRC.
NSA is quite verbose, some messages are large and it is not very
"interesting" for the average user. The logs can be enabled on demand,
or directly seen in Wireshark instead.
The RRC UE context has the RRC UE ID. Use that instead of hardcoding
something that might be wrong (because the RRC UE ID can be reused,
whereas the counter just blindly increases).
The next commit will use that RRC UE ID to free the PDCP context for the
UE. It might be wrong on reattach otherwise, because the RRC UE ID could
again be 1.
Variable spCellConfig is only used in function rrc_add_nsa_user(). Make
it local to this function to prevent possible bugs (limit the possible
scope as much as possible).
Variable reconfig is only used in function rrc_add_nsa_user(). Make it
local to this function to prevent possible bugs (limit the possible
scope as much as possible).
Simplify code by returning an allocated object to a CG_Config. It leads
to less code and is easier to reason about, because each call will
return a new CG_Config, which can be freed, irrespective of other calls
to fill_default_reconfig().
Simplify code by returning an allocated object to an RRCReconfiguration.
It leads to less code and is easier to reason about, because each call
will return a new RRCReconfiguration, which can be freed, irrespective
of other calls to fill_default_reconfig().
get_default_secondaryCellGroup() would "sanitize" the servingCellConfig,
i.e., remove BWP that are invalid. However, it is difficult to
understand (we can do sanitization once at the beginning) and reason
(why the servingCellConfig is modified in
get_default_secondaryCellGroup(), because all we want is a new
CellGroupConfig, without modifying other data structures).
Instead, do sanitization once after reading the configuration in
gnb_config.c. Also, modify physical simulators nr_dlsim and nr_ulsim to
apply this sanitization before a call to
get_default_secondaryCellGroup(), as the latter would have done the
sanitization.
This reverts commit 4c658cdd50.
This commit was introduce to signal a known segfault. The bug has been
fixed in the last commit, so this commit can be reverted as the
AssertFatal is not necessary anymore.
Prior to this commit, upon a release of a UE at the gNB in NSA, the gNB
fails with a segv. This is because the servingCellConfigCommon is used
in the reconfigurationWithSync (through a simple pointer). At the
release, the entire secondaryCellGroup is freed, leading to a free of
the servingCellConfigCommon. The gNB then tries to use it (e.g., for
looking up the numerology), and leading to a segv.
To avoid this problem, make a "deep copy" of the ServingCellConfigCommon
so that we can safely free the UEs secondaryCellGroup, without freeing
the initial ServingCellConfigCommon.
Switch to BWP where RA is configured, typically in the InitialBWP
At this point, MAC CE for C-RNTI received at gNB, UE already switched and triggered RA in that BWP, need to do BWP switching also at gNB for that C-RNTI
Integration: `2024.w28`
See merge request oai/openairinterface5g!2856
* !2847 UE setting wrong frequency in 5G rfsimulator SA test
* !2850 NR UE MAC DCI 00 BWP handling
* !2852 \[E2 agent\] Move UE RRC_CONNECTED state signaling
* !2851 Minor code cleanup and fixes
* !2842 UE assertion for msg1_SubcarrierSpacing in RA
* !2831 PUSCH power control state
* !2838 NR UE UL FAPI PDU length fix
* !2723 add initial NTN support for NR UE
* !2764 Adding 7.2 containerfiles and docker-compose
* !2827 Increase RX_DATA.indication PDU Length to 32 bits
Correct the array by taking out a verification entry in the verification
array that led to runtime error
Assertion (numparams == (sizeof(cmdline_CheckParams)/sizeof(*(cmdline_CheckParams)))) failed!
In get_common_options() /home/richie/openairinterface5g/executables/softmodem-common.c:109
Error in arrays size (41!=42)
- Add dedicated target docker files for 7.2, both RHEL and Ubuntu
- in existing dockerfiles, update to also build E2 SMs
- for UBI images, only the entitlements are necessary, the rest can be
omitted (it is superfluous)
Signed-off-by: arora <sagar.arora@eurecom.fr>
Co-authored-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
The actual propagation delay should not be smaller than the one specified.
A too short propagation delay might result in too early reception of Msg1, and with that in a mis-detection of the RAPID.
Until commit d74b2bd19f, the PSS detection step size was 4, anyways.
The PSS detection step size is a compromise between detection duration and accuracy.
The most accurate detection step size would be 1, but this would lead to even longer initial sync time.
- E2SM UE ID requires guami -> therefore RRC_CONNECTED state signaling
to RIC is now done after receiving Initial Context Setup Request
from AMF, which contains the guami info
According to the RRC specification, cellSpecificKoffset is:
Scheduling offset used for the timing relationships that are modified for NTN (see TS 38.213 [13]).
The unit of the field K_offset is number of slots for a given subcarrier spacing of 15 kHz.
If the field is absent UE assumes value 0
This parameter `cellSpecificKoffset_r17` can be set via UE command line parameter `--ntn-koffset`.
Integration: `2024.w27`
See merge request oai/openairinterface5g!2839
* !2781 Fix several ASN.1 message related memory leaks in NR
* !2790 docker compose override files for testing with locally modified executables.
* !2835 Demote logs for NR band and duplex spacing
* !2822 security in re-establishment
* !2834 Fix CN tutorial SD value
* !2843 Delete assertion for PLMN in RRCSetupComplete
* !2771 NR UE PDSCH-CSI overlap
* !2721 T2 card: LDPC encoder/decoder TB processing
* !2828 Bugfix to TX_DATA.request PDU_Length computation, change input parameter to uint32_t
* !2841 Reduce number of LOG prints in NR UE log
* !2844 phy-test mode ULSCH schdeuler hotfix
* !2765 Fix issues blocking multiple UE in one process
* !2826 NR gNB ULSCH fixes
* !2845 Another phy-test ULSCH fix (missing TDA assignment)
* !2840 chore(build): removing dependency to libatlas3
address sanitizer fails with this error upon starting the DU:
==7==ERROR: AddressSanitizer: odr-violation (0x7f8ed2594a00):
[1] size=4 'log_mem_write_side' /oai-ran/common/utils/LOG/log.c:78:14
[2] size=4 'log_mem_write_side' /oai-ran/common/utils/LOG/log.c:78:14
These globals were registered at these points:
[1]:
#0 0x7f8ed5092658 in __asan_register_globals ../../../../src/libsanitizer/asan/asan_globals.cpp:341
#1 0x7f8ed570d47d in call_init elf/dl-init.c:70
[2]:
#0 0x7f8ed5092658 in __asan_register_globals ../../../../src/libsanitizer/asan/asan_globals.cpp:341
#1 0x7f8ed3fe3eba in call_init ../csu/libc-start.c:145
#2 0x7f8ed3fe3eba in __libc_start_main_impl ../csu/libc-start.c:379
==7==HINT: if you don't care about these errors you may set ASAN_OPTIONS=detect_odr_violation=0
SUMMARY: AddressSanitizer: odr-violation: global 'log_mem_write_side' at /oai-ran/common/utils/LOG/log.c:78:14
So we do as suggested and disable ODR violations to make the test pass.
A proper solution would be to link this function only once.
The total_length parameter in compute_PDU_Length being uint16_t causes
the passed value to be possibly truncated, which can cause the
PDU_Length to be incorrectly calculated.
This change prevents that truncation, since it now matches the size
of the values passed into the function where it is being called.
- r_amf->plmn_Identity was interpreted incorrectly, therefore remove it
- selected_plmn_identity selects one of the list of PLMNs; at the
moment, OAI supports only 1 PLMN ID; print a warning if it is
different, and proceed with index 0
More information in issue #801
- make it work for SRB or DRB
- adapt callers of this function
- cleanup key derivation: the User Plane keys are generated at some places
but are not used, remove the generation
Integration: `2024.w26` (part 2)
See merge request oai/openairinterface5g!2823
* !2794 Power control changes
* !2816 Fix test asan errors
* !2820 fix(T): some missing dependencies on T
* !2714 FAPI P5 Refactoring and unitary test creation
* !2819 Prevent unnecessary assertions for invalid DCI at NR UE
* !2825 Do not extract CSI report if PUCCH format 2 CRC check fails in polar decoder
* !2805 GUAMI decoding and storing in RRC UE context fixed
This fix prevents the scheduler to process a wrong CSI feedback message, for example, it avoids the scheduler to compute a wrong MCS from CQI or a wrong RI from CQI
- Introduced command line and configuration options to set up PCI address, CPU cores used by DPDK, and DPDK file prefix for T2 offload.
- Made the dpdk_dev parameter (for setting the PCI address of the T2) mandatory.
- Configure dpdk_dev in the CI test cases.
- Replaced bbdev TEST_ASSERTs with the OAI macro AssertFatal() to harmonize error handling.
- Removed unused functions and macros from nrLDPC_offload.h.
- Reworked nrLDPC_decoder_offload.c to process all segments in a TB with a single call to LDPCdecoder() or LDPCencoder().
- Perform CRC checks on the T2.
- Modified nr_ulsch_decoding (gNB decoder) to:
- Count processed segments.
- Properly perform CRC checks.
- Created a constant NR_LDPC_MAX_NUM_CB to define the maximum number of codeblocks.
- Conditional library loading:
- On gNB: Load ldpc_t2 library if offload is enabled using the --ldpc-offload-enable flag.
- On UE: Load both ldpc_t2 and ldpc libraries since only encoder offload is supported.
- General cleanup of nrLDPC_decoder_offload.c for improved readability and maintainability.
- Modified the structure of LDPC encoder/decoder/offload parameters:
- Introduced a structure for code block (CB) related parameters.
- Removed parameter E from the encoder and offload parameter structures for clarity.
- Replaced E with perCB->E_cb in the UE encoder code.
This reverts a change in commit
ccba7c875d. There is no real reason to
show this warning (the gNB will work just fine, simply not schedule
since no free HARQ) and it makes users unsure.
- come straight to point: how to clone (don't talk about git config)
- refer to contributing documentation where necessary instead of
repeating information
- CellGroupConfig is handled through DU (hence MAC)
- mention number of DUs/CU-UPs handled per CU-CP
- mention number of UEs handled
- take out BWPs, as we don't support it properly
- typos
Update instructions and CI for cross-compilation on Ubuntu 22.
Note that for the dockerfile, we use egrep -L which has changed and does
not exit with code 0 on no match. Instead, use -vqz to invert return
code (0 if nothing found, otherwise 1).
iperf2 2.0.13, used in Ubuntu 20, does not need a "back channel"; we can
therefore use it in feMBMS (which does a broadcast, without back
channel). Ubuntu 22 comes with 2.1.5, which seems to require a back
channel, or at least, we cannot use it reliably in feMBMS. Hence,
downgrade to older iperf2 version.
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
This updates all images in the CI to Ubuntu 22. It also updates
corresponding documentation. Remove python(2) from the image, as it is
not needed. Update documentation.
It seems that the gcc coming in Ubuntu 22 does not like
stack-protector-strong, so remove it as well.
Since we compile Flexric, which does not support Ubuntu 22's default
gcc-11 (it hits a compile bug), switch to gcc-12 manually.
Since we update the compiler, we also need to be careful to use the right
address sanitizer version (which is bundled with the compiler version).
To avoid a reinstallation of the wrong asan version in target images, we
modify Ubuntu 22 targets to copy libasan from the base image. This is necessary
since we use update-alternative in the base image, but we don't want to
install compilers in the target images to use update-alternatives to
install the right asan version... This should be undone when switching
to Ubuntu 24 in the future, as it will have a newer default gcc version,
such that we don't need to update the compile in the first place.
Upgrade libpython in lteUE for U22 upgrade to make it compatible with
UHD.
A number of warnings appear when compiling flexric with gcc-12, which we
use in the next commit. Those have been fixed upstream. Switch to the
updated version to avoid warnings.
It seems libatlas-base-dev provided an `enum CBLAS_TRANSPOSE`, but we
don't install it anymore. Now, in Ubuntu, there is only a typedef'd
version in cblas.h; for RHEL(-derivatives), the same typedef'd version
is in cblas/cblas.h.
Ubuntu 18.04 is now in "Extended Security Maintenance", but otherwise
gets no updates. Remove it from supported distributions (regarding
installing packages); users can of course still use it.
Users are encouraged to upgrade to Ubuntu 20+.
Apart from the obvious change of adding ubuntu24.04 to supported
distributions, we need to remove liblapacke-dev as it is incompatible
with libatlas3-base. Installing both aborts with:
The following packages have unmet dependencies:
liblapacke : Breaks: libatlas3-base (< 3.10.3-14) but 3.10.3-13ubuntu1 is to be installed
It seems that we don't need it though, as liblapacke-dev installs the
right atlas library as a dependency.
Fix small issue noted when packing tlv value with tag 1 in which it would pack length*4 bytes, now calculated how many "segments" of 32 bits it needs to pack, same logic for unpacking tag value 1
Added missing support for packing/unpacking tag 0x001C (supportedMaxModulationOrderDl)
Now properly handles tag 0x0005 (NumConfigTLVsToReport) and subsequent TLVs that come after this value ( Table 3-9 SCF 222.10.02 )
Implement FAPI P5 message unpack, as well as message length check function procedure in FAPI P5 library.
Update check_nr_unpack_length in nfapi_p5.c to reference FAPI P5 message length check function.
Will be reused from other files in later commits.
Added packing/unpacking procedures for STOP.indication and ERROR.indication.
Separate a packing function for STOP.request for use in the NR FAPI library.
Expose needed (n)FAPI procedures to aerial_lib ( both P5 and P7 ) via a
header file.
Move (n)FAPI P7 packing/unpacking function interface into separate header file
Include needed headers in aerial_lib
- Phy config update and Sidelink frame parameters initialisation
- PSBCH scheduler to trigger TX PSBCH/RX PSBCH actions
- Sidelink indication with rx ind to trigger send SL-MIB to MAC
- Enable Scope for PSBCH use -d or --dqt
- Enable system testing of PSBCH for example using RFSIMULATOR:
- UE1 is a SYNCRONISATION SOURCE UE which transmits PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --sync-ref 4 --rfsim --rfsimulator.serveraddr server
- UE2 syncs onto UE1 during sidelink search, gets the timing and continues to receive PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --rfsim --rfsimulator.serveraddr 127.0.0.1
- In the default use case 2 Sidelink SSBs sent over 16 frames.
- In case SL-SSB configuration needs to be changed use -O option in the above command like
-O ../../../targets/PROJECTS/NR-SIDELINK/CONF/sidelink_preconfig_1txpool.conf
Integration: `2024.w24`
See merge request oai/openairinterface5g!2801
* !2789 CI: Increase iperf/iperf3 command timeout
* !2762 improve nrUE NAS security: accept NEA1,NEA2,NIA1,NIA2
* !2791 fix regressions for large physical cell id values
* !2792 Add support for MIMO 2x2 with USRP B210 at 20 MHz BW and 3/4 sampling rate
* !2748 Small UE fixes
* !2745 Add google test testcases for nr_get_Pcmax
* !2785 Update FHI 7.2 interface, test bandwidths, fix integer overflows
* the goal is to make the documentation more procedural and
descriptive and easier to understand
* added missing info in RLC-NR about reassembling of AM frames
Avoid UBSan error:
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c:1524:41: runtime error: signed integer overflow: 737285888 + 1459370880 cannot be represented in type 'int'
Avoid UBSan error:
openair1/SCHED_NR/phy_procedures_nr_gNB.c:867:37: runtime error: signed integer overflow: 1744750952 + 412859840 cannot be represented in type 'int'
Avoid UBSan error:
openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c:246:18: runtime error: signed integer overflow: 1457321472 + 922889664 cannot be represented in type 'int'
Avoid UBSan error:
openair1/SCHED_NR/phy_procedures_nr_gNB.c:869:43: runtime error: signed integer overflow: 1546663455 + 1635930955 cannot be represented in type 'int'
Integration: `2024.w23`
See merge request oai/openairinterface5g!2788
* !2510 NR UE MAC UCI on PUSCH and aperiodic CSI reporting
* !2597 LTTng logger (CTF)
* !2751 synch the USRP time accross devices using the host clock
* !2775 Remove some global variables
* !2779 remove rb_mask_ul from permanent storage for stack local usage
* !2782 USRP: add a T trace to record the RX IQ data on antenna 0
* !2783 build_oai: fix bad options' names
* !2753 Pucch power control
* IP address of VNF shall be aerial1's one
* scripts within cubb container shall be run with sudo now
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
In some testcases, especially when iperf test duration is short (10s),
client does not report on time and report collection is interrupted.
This commit increase timeout for iperf/iperf3 commands.
Avoid UBSan error:
openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c:183:22: runtime error: signed integer overflow: 2122747784 + 27403601 cannot be represented in type 'int'
avoid UBsan error:
openair1/PHY/NR_TRANSPORT/pucch_rx.c:266:21: runtime error: signed integer overflow: 2113190528 + 117251752 cannot be represented in type 'int'
avoid UBsan error:
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c:459:77: runtime error: signed integer overflo w: 2009540296 + 668087372 cannot be represented in type 'int'
xran's xran_bm_init() uses rte_pktmbuf_pool_create() to allocate DPDK
buffers. For a 1x1 configuration, the number of buffers might be too
small, and rte_pktmbuf_pool_create() might fail. This commit ensures
that we increase the number of buffers to have enough even in a 1x1
configuration. This works by chosing the next power of two, which is
recommended as per DPDK documentation.
Closes-Bug: #750
Neighbor configuration can be given by gNB.conf
get_MeasConfig function is extended as it will prepare A2 / A3 Report
Configs. Single Meas Obj is used for all.
rrc_gNB_process_MeasurementReport function is extended to process A2 /
A3 measurement events. helper functions are written to fetch neighbour
cell informations from sequence containers.
(get_neighbour_cell_information, get_neighbour_config)
- neighbour_config.conf file includes neighbour and measurement related parameters
Neighbour List:
- nr_cellid: the identity of existing cell who has neighbour
- neighbour_cell_configuration(list): includes the identity parameters
of the neighbour cell such:
- gNBID (incase of N2 Handover / to be identified from AMF)
- nr_cell_id (target gNB needs to consider)
- physical_cellId (needed for measurement reporting)
- absoluteFrequencySSB (needed for measurement reporting)
- subcarrierSpacing (needed for measurement reporting)
- plmn / tracking area code (incase of N2 Handover / needed for AMF
to identify / allow HO)
NR Measurement Configuration
- Periodical
- enable (default is 0, 1 enables the reporting)
- includeBeamMeasurements, maxNrOfRS_IndexesToReport (configurable
reporting parameters)
- A2
- enable (default is 0, 1 enables the reporting)
- threshold , timeToTrigger (configurable reporting parameters)
- A3
- cell_id (the nr_cellid of neighbour cell. So this A3 parameters
will be used for the neighbour
- [-1] means default. so it can be applied to any neighbour if
there is no specific config
- Neighbour specific A3 Threshold can be used or default can be
selected depending to the neighbour planning
- The neighbour-config.conf specifies, apply default A3 for
neighbours 3 and 4 | apply specific one for neighbour 2
- offset, hysteresis, timeToTrigger (configurable reporting parameters)
the neighbour_config.conf can be included in the gNB.conf file. Example
is given: gnb.sa.band78.106prb.rfsim.neighbour.conf
A sequence array container is used for neighbour cell configuration. RRC
structure has this container. A Measurement configuration structure is
defined. This structure has Periodical / A2 Event structures and also a
sequence container for A3 Event List.
These structures are filled during the initialization. While F1 Setup
Response is coming from DU to CU, the intra frequency / inter frequency
neighbour decision is given for the existing cell. Also new neighbours
could be added here if needed.
With the capabilities now given as part of this MR, it happens that when
checking the "docker compose config", the container_name might not be
close to the service name. Something like
service:
cap_drop:
...
cap_add:
...
container_name:
This is inconvenient, as the previous grep for the service name + 3
lines might not cover the service name. To circumvent this, give the
service name directly in "docker compose config". (no clue why it has
not been done like this from the start)
- sa_b200_gnb
- sa_aw2s_gnb
- sa_e1_b200
- sa_f1_b200
- sa_sc_b200_gnb
- nsa_b200_gnb
By default, the container has no access to /dev. Mount all USB devices
into the container to ease usability: by default, USB devices are
mounted under /dev/bus/usb using the bus ID, which is different on every
system and might change on reboots or with (un-)plugging USB devices.
Hence, mount all USB; the process has not many capabilities anyway, and
thus might not do much harm.
A proper solution would be to write a udev rule to mount a device using
its vendor and product ID, and only mount the corresponding device into
the container.
- SA 2x2 tests on 60 and 100 MHz
- N310-based OAI gNB + UE
Give SYS_NICE and IPC_LOCK for performance. On the UE side, give
NET_ADMIN (for interface bringup) and NET_RAW (for ping an TUN).
It might be desirable to run the UE without superuser rights. More
concretely, it might run without NET_ADMIN. In this case, various
corresponding operations on the TUN socket fd might fail. In this
commit,
- improve error reports to make them more clear
- do not automatically exit(1), but return from the function to ensure
continuity of the softmodem
Use common threadCreate() function to create P7 thread with high(er)
priority. Remove old calls to set_priority(), as this is already done
with threadCreate().
Use common threadCreate() function to create P7 thread with high(er)
priority. Remove old calls to set_priority(), as this is already done
with threadCreate().
Use common threadCreate() function to create P7 thread with high(er)
priority. Remove old calls to set_priority(), as this is already done
with threadCreate().
The main thread of nr-uesoftmodem (executing main()) is mostly working;
it is thus not necessary to set high priority. Instead, the threads
created with threadCreate() will receive higher priority, if possible
(as determined by the availability of SYS_NICE capability).
To inform if SYS_NICE is not present, print a warning in main().
SYS_NICE is a capability that allows a process to set thread affinity
and priority, among other things (see capabilities(7) for more info).
In this commit, add a function that allows to determine if the process
has this capability, and try to change the thread affinity and priority,
if requested. If the capability does not exist, the function will simply
not attempt to change the corresponding thread attributes.
To determine if the process has SYS_NICE, libcap can be used. However,
it might not be installed by default. To avoid requiring another
dependency, if we detect that libcap is not present, use a workaround by
try to set a real-time scheduling policy; if it's present, or can be
changed, we assume that the process has SYS_NICE (and clean up, if
relevant).
Simplify reading of capabilities
set_latency_target() attempts to set keep "low latency" by
- writing a specific latency to /dev/cpu_dma_latency
- setting manually the minimum CPU processor frequency to be the maximum
There is no functionality to undo this after stopping the softmodem(s),
and most users are probably not even aware that OAI does this. It is
generally preferable to set this beforehand using a governor or by
disabling sleep states (as outlined in the tutorial, and in a follow-up
commit in the performance tuning docs).
The previous mlockall() call, to lock memory to RAM, is retained in a
new function. There were additional mlockall() calls, which have been
replaced with lock_memory_to_ram(), where necessary.
Print a clear error if a config file does not exist (unclear previously,
when the user would get a confusing, unspecific, "file I/O error" on
line 0)
I tried to free the memory that had been allocated at that point, and
verified that using the address sanitizer. Nevertheless, the function
does too much, and is too complicated for refactoring.
Use correct baseTag for Unit Tests build in execution:
- if build_helper or othe files changed, which would trigger rebuild of
ran-base, use the corresponding ci-temp tag
- use that tag consistently afterwards
The RTT for GEO satellites is more than 500 ms.
And as the TA update interval must be greater than the RTT, we increase it to 1 second instead of 100 ms.
Should also do no harm for terrestrial networks.
According to the RRC specification, cellSpecificKoffset is:
Scheduling offset used for the timing relationships that are modified for NTN (see TS 38.213 [13]).
The unit of the field K_offset is number of slots for a given subcarrier spacing of 15 kHz.
If the field is absent UE assumes value 0
This parameter `cellSpecificKoffset_r17` can be set in the gNB conf file, in the section `servingCellConfigCommon`
A particular GCC version (v13?) used by CI machines potentially has a
bug that issues a mismatch bound warning on function array arguments.
This commit should prevent it from happening.
There is already a command line option called 'ue-scan-carrier' which
seemed to blindly look for SSB by changing the center frequency by
+/-100Hz if the previous attempt failed. This is probably copied from
LTE and is not suitable for NR. This commit uses this option to either
1. Perform initial sync on one GSCN if the SSB position if known
2. Or scan the all GSCN (if the SSB postion is unknown)
Also, the following is done for re-synchronization
1. Scan all GSCN when UE comes back from IDLE state
2. Scan one GSCN when UE does re-estabishment
Removed dependency of lte-softmodem.h in nr-softmodem.c.
CONFIG_HLP_UESCAN is declared also in lte-softmodem.h.
Changed Info to Debug because the logs are too much if large number of
GSCN scans run concurrently. Print PSS correlation peak and average
power of detected cells.
Till this commit, the UE gets the position of SSB in frequency from
command line and does the syncronization by locating the SSB in time. It
does this by generating a PSS time signal during initialization with the
SSB offset given via command line. Then PSS detection is done by
correlation.
In this commit, the UE computes a list of GSCN in the current NR band
that falls within the current bandwidth for the set center frequency.
For each GSCN in the list, the UE starts a thread and performs the
following:
1. Generate PSS time signal with SSB offset for current GSCN.
2. Detect PSS, SSS and decode PBCH (this step remains the same).
After all threads finishes, the results are collected.
For now, only the first detected PBCH is used to proceed further. So
this PBCH is indicated to MAC and UE exits initial sync.
Future work: The cell search can be standalone feature where the UE
could scan for SSB in the entire NR band. This would require changing
radio's frequency on the fly as the UE's bandwidth would not cover an
entire NR band. The cell detection can futher be imporved by looking
for SIB1 for each decoded PBCH.
Integration: `2024.w22` (Part 1)
See merge request oai/openairinterface5g!2773
* !2698 Handle division by 0 gracefully in average channel level calculation
* !2743 Demystifying 10log10(2^30) in signal energy calculations.
* !2767 NR UE imeisv fix
* !2768 Over-estimate short and long BSR for better latency and TCP throughput
* !2769 maxMIMOLayers parameter in configuration file
38.321 6.1.3.1 says: "The size of the RLC headers and MAC subheaders are
not considered in the buffer size computation" [for BSR]. However, prior
to this commit, we take the size signaled of the BSR and schedule the UE
with that amount of data, making it impossible for the UE to transmit
all its data at once (because it is the size signaled + headers).
In this commit, over-estimate the buffer status size. As we cannot know
the exact number and size of headers, we simply use "BSR size + n", as
done in function overestim_bsr_index().
* nb_re_pdsch is directly linked to nb_rb_pdsch, if the latter is 0 the
former is also 0
* compute average channel level only when number of RE for PDSCH is not 0
the average channel level will be set to 0 otherwise
* Added a log message to handle this special case, which is consequence
of other issues in the RX chain
* with this commit, the inconsistency in the RX chain will be handled
in later in nr_ue_pdsch_procedures with a demodulation failure
other minor changes:
* Improved clarity by using NR_NB_SC_PER_RB instead of hard-coded value 12 in nb of RBs calculation
* cleaned up unused variable and outdated comments
Compiling the nrUE with -fsanitize=undefined leads to a crash
because the function nas_stream_encrypt_eia1() accesses the data
as uint32_t but the data is not aligned.
Actually this function wants 64 bits (big-endian) of data, so let's
introduce a simple function to read a big-endian 64 bits value.
It may seem bad (unoptimized), but looking at the output of gcc
without -fsanitize=undefined this will be translated as just one
movbeq instruction (on the machine where I did the test), which is
actually less instructions than the previous version which was doing
too movbel plus orq.
Moreover, after the main loop we need to process the last remaining
bytes (so less than 8). The code was wrong, reading past the input
data (and also not caring about alignment). It may work, it may fail,
it depends on many things. But it's plain wrong. So this was replaced
for something better, simpler. No need for mask32bit() anymore, only
one call to U64() is needed.
And now -fsanitize=undefined is happy, so all is good.
We also restrict the input length to be multiple of 8 bits. I don't
think it's a problem. To be refined if I'm wrong. (I think RRC and
NAS messages are 8-bits aligned, so it shouldn't be a problem.)
It should not be > 0xffffff.
Normally the core network would prevent this case from happening.
Plus to reach this value means to send a lot of NAS messages, which
is very doubtful in practice.
Anyway, it's better to deal with the case.
We exit if that happens. To be refined if needed (very doubtful).
This function was very wrong, now it's just wrong.
(It does not sanitize the input properly. Some bad input may have
unexpected effects on the nrUE.)
It needs a serious rewrite.
I just wanted to "fix" it so that it processes correctly some
correct input data.
OAI core network is sending Deregistation Accept in clear, even
after security context activation.
The standards is not clear to me, so let's accept it.
To be removed if incorrect with respect to the standards.
(The core network will need to be fixed then.)
The version before this commit is wrong, taking wrong byte for msg_type
in some cases.
I don't have much time to implement a proper NAS PDU parser, so let's go
with hardcoded values.
Some later work will be done to have a cleaner solution. As of now, it's
too much work.
Get the security algorithms from SecurityModeCommand.
Restructure the code a bit: add the function handle_security_mode_command()
and adapt the code to use it.
Derive also knas_enc (not used yet).
Do the derivation for knas_enc and knas_int only after reception
of SecurityModeCommand. We need the algorithms configured by core
network to derive those keys.
Integration: `2024.w21`
See merge request oai/openairinterface5g!2757
* !2733 Remove duplicated function to reverse N bits
* !2712 rfsimulator: add support to simulate a long propagation delay
* !2695 improve polar init and polar readability
* !2709 Fix cmdline configmodule in phy simulators
* !2756 remove some enb dependencies in NR files
* !2687 bug fix ue UL payload filling randomly done in retransmissions (pointer not set)
* !2543 power/PHR normalizations for deltaMCS power adaptation
* !2719 Refactor LC handling at MAC
* !2736 Fix debug for ongoing transactions
* !2747 Fix aerial memory leak
* !2761 Use timeout command to kill hanging iperf3
* !2752 fix-dci11-type0-bitmap-setting
* !2759 Fix invalid MSG2 HARQ feedback attempt and remove accumulated_delta_PUCCH field from UE FAPI IF
* !2740 bugfix/cleanup: remove uint8_t to encode size plus some cleanup
* !2760 fix 5G NR SA FDD configs for 24 and 25 PRBs
* !2520 Documentation on coding style, workflow, and review instructions
It can happen that in the current DL slot, we cannot send an allocation
for Msg3 in a later UL slot. Up to this commit, MAC printed a warning.
However, this is not really a warning, as it will likely work in the
next or a later slot. So demote this to debug.
The starting point was the function do_NR_DLInformationTransfer() which
may deal with more than 256 bytes.
Then why not cleanup all the functions in the same file.
(And do a bit of formattting fixing while we're here.)
Then cleanup the callers of those functions.
Then, because of do_SIB23_NR() let's also cleanup in some
structures.
Not all the codebase was cleaned up, there surely remain some uint8_t
(and char/short/uint16_t) which are wrong.
In some pipelines, it happens that iperf3 is hanging on 100% CPU load.
In these cases, a simple TERM signal does not seem to be enough to kill
it; KILL is necessary.
While e.g., RemoteCmd's driver paramiko has a timeout command, the
documentation [1] is not really clear how it is trying to stop commands.
Since it effectively does not stop, we have to assume it is only sending
TERM.
To remedy this, use the timeout command to start iperf3. We use option
-v for diagnose timeouts on stderr, and send KILL after an additional 3
seconds (-k3) if TERM does not succeed. The timeout is sent to the same
duration as the overall iperf timeout.
[1] https://docs.paramiko.org/en/3.4/api/channel.html#paramiko.channel.Channel.settimeout
make sure the SSB is offset by 4 PRBs from the BW start.
Therefore, the ARFCN for the SSB center must be offset by 14 PRB from the ARFCN for the BW start.
A to-be-added UE's RA is added through nr_mac_add_test_ue() (the name is
misleading, it is not a "test UE") through its CellGroupConfig. Using
the process_CellGroupConfig() is unfortunate, because it is not really
clear what part of the CellGroupConfig gets evaluated (it is certainly
not all). Move the code for adding a new RA directly in the user-add
function, and refactor this one.
Introduce new LC configuration "priority", as specified in 38.321, and
use to sort LCs by priority. We set the priority of an SRB according to
38.331 Section 9.2.1, and for a DRB to be the minimum priority of the
QoS flows associated to this DRB.
Introduce new functions to add/release LCs without needing to go through
the intermediate CellGroupConfig. This harmonizes LC handling at the "DU
handler" to keep it consistent with RLC bearer handling.
These functions allow to group LC configuration handling, and we can
remove functions for setting NSSAIs and QoS by handling in one central
place (while adding LCs).
nr_mac_add_test_ue() is used by simulators and also in NSA mode to add a
new UE. Ideally, these users should also call the ue context setup
request handler to add a UE context; for the moment, respect the passed
list of LCs to add. Similarly, for do-ra, we require a dedicated
function to still parse the CellGroupConfig, so we keep that part of
functionality.
On reestablishment, since we do not process the CellGroupConfig from the
old UE, we need to add LCs for the new UE based on the onces from old
UE.
Use a common structure nr_lc_config_t to group LC configuration for one
logical channel. Use seq_arr for simple lookup, adding, removing of
elements without manual indexing logic.
This commit retains the previous logic of adding/releasing LCs through
the process_CellGroupConfig(), although we know while building the
CellGroupConfig if we add/release LCs. The next commit fixes this.
If we do not make this change, with the next commit, we get the
following error from gcc:
openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_kpm.c:299:46: error: assignment of read-only location '*(arr_ue_id.ue_info_list + (sizetype)(arr_ue_id.sz * 2444864))'
| arr_ue_id.ue_info_list[arr_ue_id.sz] = *ue;
In a later commit, we will use find_if in L2. In the case of building
with E2 agent, we link e2_agent which comes with its own implementation
of find_if_arr(), which results in a name clash. Rename the OAI
implementation, as nothing uses this, anyway.
- addition of control of deltaMCS if enabled in configuration file.
- introduce separate parameter to disable 256QAM in UL
- put min_grant_prb configuration back in pf_ul() as default prb size.
Integration: `2024.w21b`
Closes#734
See merge request oai/openairinterface5g!2755
* !2700 Fix UE PUCCH multiplexing infinite loop
* !2724 Correct PRACH preamble tx power calculation.
* !2726 NR SA Tutorials
* !2728 Use existing function for bits reversal
* !2732 CU handle F1 setup Req- TAC conversion
* !2738 Correct data offset for unscrambling in PUSCH processing
* !2742 UE: fix mutex locking verification
* !2737 rename persisted ul harq status per pid with a uniq name, make better mutual exclision of processSlotTX()
This reverts commit 0d0e111135. It was
set to UE RX to TX time to 2 as it was deemed that the UE could sustain
this time. However, we noticed a degradation of performance, so reset
the RX to TX time to something higher to ensure proper performance.
Integration: `2024.w21`
See merge request oai/openairinterface5g!2746
* !2717 Additional check on pucch_Config and srs_Config
* !2730 Fix for SSB index in function get_nr_prach_info_from_ssb_index
* !2734 add a function to reset the transmission timestamps chain
* !2741 Fix several potential segfaults in UE PUCCH tx power determination.
Correctly compute the offset of data to unscramble in PUSCH processing
at the gNB. Rename variables to make them easier to spot (instead of
"s"), and remove a global variable.
Closes: #734
uper_encode_to_buffer() of asn1c returns the number of BITS that have
been encoded; if we use this, we need to calculate the resulting number
of bytes (rounding up) to get the right buffer size.
Note that do_NR_ULInformationTransfer() uses
uper_encode_to_new_buffer() which returns the number of BYTES, hence, in
this similar function, we should not modify the return value.
Removed arbitrary offset of 30dB.
Changed sign for pathloss: pathloss calculated in compute_nr_SSB_PL is the difference between transmitted and received power.
Transmission power for preamble should compensate the pathloss, therefore power should increase with pathloss.
Add the option `--rfsimulator.prop_delay` to specify the simulated receive-path (gNB: UL, UE: DL) propagation delay in ms.
This option can be used e.g. to simulate a simple GEO satellite channel by specifying `--rfsimulator.prop_delay 238.74` to both, the gNB and the UE.
This is part of the work developed by Fraunhofer IIS within the ESA-funded project 5G-GOA (https://connectivity.esa.int/projects/5ggoa).
Integration `2024.w18`
See merge request oai/openairinterface5g!2713
* !2705 Fix CRC check in UE DCI detection
* !2708 Adding few more NR bands to the list of supported ones
* !2701 gNB archi fixes
* !2203 DL-MMSE
* !2684 remove asserts on min RX/TX, set the RX/TX shift as 2 in the UE
* !2594 F1AP refactoring to align with O-RAN.WG5.C.1-v11
Taking the example of the AMF Set ID, the previous version of the macro
used another macro to encode the number, then marked the last 6 bits in
the bit string (of length 16/2 bytes) as unused. This is wrong, because,
assuming AMF Set ID=3, it basically truncates the number by encoding all
16 bits and cutting off the last 6, like this:
------------------- encode 16 bits
0000 0000 0000 0011
------------ take these 10 bits
So what remains is these bit positions of the number:
(16,15,14,13,12,11,10,9,8,7) -- the last 6 bits are cut (and the first 6
are either 0 or garbage, because they don't exist).
Instead, manually encode bits (10,9,8,7,6,5,4,3) in the first byte, and
(2,1) in the second byte of the bit string, like so:
------------ encode 10 bits
0000 0000 1100 0000
------------ take these 10 bits
Do the same with the pointer.
The AMF Region ID above is correct, as it is exactly 8 bits.
In the case of PDU sessions in the NG UE context setup request, we first
have to set up security. Hence, in this commit, implement the "delayed"
set up of theses PDU sessions, and acknowledge the setup request after
reconfiguration, as requested by O-RAN.WG5.C.1-v11.
Trigger UE ctxt setup response for the case of "registration request"
(no PDU sessions in UE Context setup response), as mandated by
O-RAN.WG5.C.1-v11.
As of this commit, since we now send the UE security command as a DL NAS
message, there is no F1 UE Context setup request. Hence, instead of
sending a UE context modif request, send the UE context setup request
after the E1 bearer setup response (which logically also makes more
sense, as the E1 setup procedure comes before the F1 setup procedure).
This reverts commit 0f100a6e94, which
introduced a hack to possibly wait with a PDU session setup at the RRC
in case a RRC UE capability transaction (requesting UE capabilities from
a UE) was ongoing. This happened, as we delayed the UE capabilities to
after the first RRC reconfiguration; in that case, certain UEs were
requesting the next PDU session, and if RRC did not delay the new PDU
session (as requested from the core), this procedure might occur while
UE capability enquiry was ongoing, leading to failures in these
transactions.
The default RRC reconfiguration was previously sent after the security
mode command as a "first" RRC reconfiguration. However, it is simply not
needed, as it will be triggered through a subsequent reconfiguration
that also sets up DRBs.
Move the Measurement Config to the "other/dedicated" RRC
reconfiguration.
This reconfiguration would have forwarded a NAS PDU (typically a
registration accept). This is now done by a dedicated forwarding of NAS.
This reverts commit 4a7d7975ce.
Trigger the UE capability right after security mode complete, as
specified in O-RAN WG5.C.1-v11. Also, there is no "need" for the
"default" RRC Reconfiguration (it will come once PDU sessions are
requested), so remove this as well.
Previously, the CU sent the Security Mode Command as part of a UE
context setup request. This was done "because it was possible", not
because there was an inherent need to do this. However the LiteOn DU
does not like this, as it expects to also have a DRB in the UE context
setup request procedure, which is not always the case.
Hence, send the Security Mode Command in a normal DL RRC msg transfer
over F1. As of this commit, there is not UE context Setup Request (so it
might not work with all DUs), but the OAI DU is cool and does not care,
so RFsim still works.
This also aligns the CU's behavior with O-RAN.WG5.C.1-v11.
Finally, as of this commit, we do not trigger a UE context setup
request, so we cannot handle PDU sessions inside the initial UE context
setup request at the same time as the security mode command (which was
done previously before reaching this point). This will be fixed in a
later commit.
In the DU, read slice information from the DU config file. Handle
multiple slices within the F1 Setup Request structure representation,
and forward it via F1 to CU. The DU slice information is stored in the
setup request structure.
This reverts commit eaf28414ca.
This assertion was introduced as we (wrongfully) thought we needed to
calculate the SSB ARFCN at the CU. Since PBCH might carry one bit, which
is not available at the CU, only certain SSB ARFCNs would have been
possible.
With the availability of the SSB ARFCN through the
MeasurementTimingConfiguration, this is not necessary anymore.
MeasTimingConfig may not come with F1 Setup Request: some DUs send it
with the DU configuration update. Handle this gracefully by checking for
MTC before using it.
Use the correct MIB data structure, MIB_t. This is required by 38.473,
and the LiteOn DU sends only that. So our CU needs to handle it, so
align the OAI DU as well.
@@ -5,22 +5,26 @@ We want to make contributing to this project as easy and transparent as possible
Please refer to the steps described on our website: [How to contribute to OAI](https://www.openairinterface.org/?page_id=112).
1. Sign and return a Contributor License Agreement to OAI team.
2. Register on [Eurecom GitLab Server](https://gitlab.eurecom.fr/users/sign_up) if you do not have any.
2. Register on [Eurecom GitLab Server](https://gitlab.eurecom.fr/users/sign_up)
if you do not have any.
- We recommend that you register with a professional or student email address.
- If your email domain (`@domain.com`) is not whitelisted, please contact us (mailto:contact@openairinterface.org).
- If your email domain (`@domain.com`) is not whitelisted, please contact us
(mailto:contact@openairinterface.org).
- Eurecom GitLab does NOT accept public email domains.
3. Provide the OAI team with the **username** of this account to (mailto:contact@openairinterface.org) ; we will give you the developer rights on this repository.
4. The policies are described in these wiki pages: [OAI Policies](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/oai-policies-home).
- PLEASE DO NOT FORK the OAI repository on your own Eurecom GitLab account. It just eats up space on our servers.
- You can fork onto another hosting system. But we will NOT accept a merge request from a forked repository.
3. Provide the OAI team with the **username** of this account to
(mailto:contact@openairinterface.org) ; we will give you the developer
rights on this repository.
4. The contributing policies are described in the [corresponding documentation
page](doc/code-style-contrib.md).
- PLEASE DO NOT FORK the OAI repository on your own Eurecom GitLab account.
It just eats up space on our servers.
- You can fork onto another hosting system. But we will NOT accept a merge
request from a forked repository.
* This decision was made for the license reasons.
* The Continuous Integration will reject your merge request.
- All merge requests SHALL have `develop` branch as target branch.
## Coding Styles ##
# License #
There are described [here](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/guidelines/guidelines-home).
## License ##
By contributing to OpenAirInterface, you agree that your contributions will be licensed under the LICENSE file in the root directory of this source tree.
By contributing to OpenAirInterface, you agree that your contributions will be
licensed under the license described in the file [`LICENSE`](./LICENSE) in the
This docker-compose is designed to use `OAI-gNB` with a 7.2 compatible Radio Unit. Before using this docker compose you have to configure
the host machine as per the [ORAN_FHI7.2_Tutorial](../../../doc/ORAN_FHI7.2_Tutorial.md). The container image used by the docker compose file is tested only on `Ubuntu 22.04` docker host.
## Build Image (Optional)
Refer to [OAI Docker/Podman Build and Usage Procedures](../../../docker/README.md)
## Configure Networking
### SR-IOV Virtual Functions (VFs)
In docker-compose environment there is no automated method
to configure the VFs on the fly. The user will have to manually configure
C/U plane VFs before starting the container `OAI-gNB`.
For `N2` interface we are using `macvlan` driver of docker.
You can use the `bridge` driver, in situation
- When the core network is running on the same machine
- or different machine but you have configured
needed `ip route` and forwarding to access the core network from RAN host.
To configure docker `macvlan` network
you need to choose `ipam.config` and `driver_opts.parent` are per your environment
```
oai-net:
driver: macvlan
name: oai-net
ipam:
config:
- subnet: "172.21.16.0/22"
ip_range: "172.21.18.20/32"
gateway: "172.21.19.254"
driver_opts:
com.docker.network.bridge.name: "oai-net"
parent: enp193s0f0
```
To configure `bridge` network you need to choose `ipam.config.subnet` as per your environment.
```
oai-net:
driver: bridge
name: oai-net
ipam:
config:
- subnet: 192.168.72.128/26
driver_opts:
com.docker.network.bridge.name: "oai-net"
```
## Deploy OAI-gNB Container
The [configuration file](../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-benetel650.conf) used by docker compose is configured for Benetel 650 RU (RAN650-1v1.0.4-dda1bf5).
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
