pre-commit config

Integration `2026.w16`

* !4040 fix: issue 911 - replace timer oneshot to periodic.
* !4041 Compilation without T: move to physims
* !4046 fix(record_db doc): correct the path for T_messages.txt and mention use of ninja/make
* !3994 Update CN5G images to release v2.2.0 and update traffic generator image
* !4024 Fix fill_srs_channel_matrix
* !3983 Add SIB 3,4 support, configurable SIB2 and refactor CU/DU SIB management
* !4030 Miscellaneous code improvements
* !4039 Verify consistency of CSI report in L2 instead of RRC
* !3991 L1 RX: use queues instead of arrays and linear search for PUCCH, PUSCH, SRS, PRACH
* !4011 CI: remove cppcheck, cleanup in build and license checks
* !4051 Fix EMA cold-start for noise and SNR/RSSI measurements

Closes #1063

See merge request oai/openairinterface5g!4048

CMakeLists.txt

@@ -709,14 +709,15 @@ target_link_libraries(SCHED_LIB PRIVATE asn1_lte_rrc_hdrs)
 set(SCHED_NR_SRC
   ${OPENAIR1_DIR}/SCHED_NR/phy_procedures_nr_gNB.c
   ${OPENAIR1_DIR}/SCHED_NR/nr_prach_procedures.c
+  ${OPENAIR1_DIR}/SCHED_NR/nr_ru_procedures.c
   ${OPENAIR1_DIR}/SCHED_NR/phy_frame_config_nr.c
 )
 add_library(SCHED_NR_LIB ${SCHED_NR_SRC})
 target_link_libraries(SCHED_NR_LIB PRIVATE asn1_nr_rrc_hdrs UTIL)
+target_link_libraries(SCHED_NR_LIB PRIVATE NFAPI_LIB) # some FAPI messages pack "subPDUs"
 
 set(SCHED_SRC_RU
   ${OPENAIR1_DIR}/SCHED/ru_procedures.c
-  ${OPENAIR1_DIR}/SCHED_NR/nr_ru_procedures.c
   ${OPENAIR1_DIR}/SCHED/prach_procedures.c
 )
 add_library(SCHED_RU_LIB ${SCHED_SRC_RU})
@@ -752,6 +753,7 @@ set(NFAPI_SRC
 add_library(NFAPI_LIB ${NFAPI_SRC})
 target_link_libraries(NFAPI_LIB PUBLIC nfapi_common)
 target_link_libraries(NFAPI_LIB PUBLIC nr_fapi_p5 nr_fapi_p7)
+target_link_libraries(NFAPI_LIB PRIVATE z)
 
 if(OAI_WLS)
   target_compile_definitions(NFAPI_LIB PRIVATE ENABLE_WLS)
@@ -877,6 +879,10 @@ set(PHY_SRC
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pilots_mbsfn.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_coding.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dlsch_modulation.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c  
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci_tools.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/pbch.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/dci.c
@@ -893,22 +899,22 @@ set(PHY_SRC
   )
 
 set(PHY_SRC_RU
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/if4_tools.c
+  ${OPENAIR1_DIR}/PHY/if4_tools.c
   ${OPENAIR1_DIR}/PHY/LTE_UE_TRANSPORT/drs_modulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
-  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
   ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_ul.c
-  ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_nr.c
   ${OPENAIR1_DIR}/PHY/MODULATION/ul_7_5_kHz.c
   ${OPENAIR1_DIR}/PHY/MODULATION/gen_75KHz.cpp
   ${OPENAIR1_DIR}/PHY/MODULATION/beamforming.c
   ${OPENAIR1_DIR}/PHY/MODULATION/compute_bf_weights.c
   ${OPENAIR1_DIR}/PHY/INIT/lte_init_ru.c
-  ${OPENAIR1_DIR}/PHY/INIT/nr_init_ru.c
   ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/prach.c
+  )
 
+set(NR_PHY_SRC_RU
+  ${OPENAIR1_DIR}/PHY/MODULATION/nr_beamforming.c
+  ${OPENAIR1_DIR}/PHY/MODULATION/slot_fep_nr.c
+  ${OPENAIR1_DIR}/PHY/INIT/nr_init_ru.c
+  ${OPENAIR1_DIR}/PHY/if4_tools.c
   )
 
 set(PHY_SRC_UE
@@ -1068,7 +1074,7 @@ add_library(PHY_NR_COMMON ${PHY_NR_SRC_COMMON})
 target_link_libraries(PHY_NR_COMMON PUBLIC UTIL)
 
 add_library(PHY_NR ${PHY_NR_SRC})
-target_link_libraries(PHY_NR nr_phy_common nr_common nr_fapi_p5 polar smallblock)
+target_link_libraries(PHY_NR nr_phy_common nr_common nr_fapi_p5 polar smallblock ds)
 
 add_library(PHY_NR_NO_AVX_256 ${PHY_NR_SRC})
 target_link_libraries(PHY_NR_NO_AVX_256 nr_phy_common nr_common)
@@ -1080,6 +1086,8 @@ target_link_libraries(PHY_NR_UE PRIVATE asn1_nr_rrc_hdrs nr_phy_common nr_common
 add_library(PHY_RU ${PHY_SRC_RU})
 target_link_libraries(PHY_RU PRIVATE asn1_lte_rrc_hdrs UTIL)
 
+add_library(NR_PHY_RU ${NR_PHY_SRC_RU})
+
 #Layer 2 library
 #####################
 set(MAC_DIR ${OPENAIR2_DIR}/LAYER2/MAC)
@@ -1742,7 +1750,7 @@ target_link_libraries(lte-softmodem PRIVATE
   lte_rrc nr_rrc s1ap m2ap x2ap m3ap GTPV1U SECURITY UTIL SCTP_CLIENT MME_APP SCHED_LIB SCHED_RU_LIB
   PHY_COMMON PHY PHY_RU  L2 L2_LTE NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB MISC_NFAPI_LTE_LIB
   ${NAS_UE_LIB} ITTI SIMU radio_common softmodem_common
-  -Wl,--end-group z dl)
+  -Wl,--end-group dl)
 
 target_link_libraries(lte-softmodem PRIVATE pthread m CONFIG_LIB rt)
 target_link_libraries(lte-softmodem PRIVATE ${T_LIB})
@@ -1757,13 +1765,17 @@ add_executable(oairu
   ${OPENAIR_DIR}/executables/lte-ru.c
   ${OPENAIR_DIR}/executables/ru_control.c
   ${OPENAIR_DIR}/openair1/SCHED/phy_procedures_lte_common.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/freq_equalization.c
+  ${OPENAIR1_DIR}/PHY/LTE_TRANSPORT/ulsch_demodulation.c
+  ${OPENAIR1_DIR}/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c
   ${OPENAIR_DIR}/executables/main_ru.c
   ${OPENAIR_DIR}/common/utils/lte/prach_utils.c
 )
 target_link_libraries(oairu PRIVATE
   -Wl,--start-group
   SCHED_RU_LIB PHY_COMMON PHY_RU UTIL radio_common softmodem_common
-  -Wl,--end-group z dl)
+  -Wl,--end-group dl)
 
 target_link_libraries(oairu PRIVATE pthread m CONFIG_LIB rt ${T_LIB})
 target_link_libraries(oairu PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -1792,7 +1804,7 @@ target_link_libraries(lte-uesoftmodem PRIVATE
   SECURITY UTIL SCTP_CLIENT MME_APP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON
   PHY_UE PHY_RU L2_UE L2_LTE SIMU NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB MISC_NFAPI_LTE_LIB
   ${NAS_UE_LIB} ITTI radio_common softmodem_common
-  -Wl,--end-group z dl)
+  -Wl,--end-group dl)
 
 target_link_libraries(lte-uesoftmodem PRIVATE pthread m CONFIG_LIB rt)
 target_link_libraries(lte-uesoftmodem PRIVATE ${T_LIB})
@@ -1808,11 +1820,12 @@ add_executable(nr-oru
   ${OPENAIR_DIR}/openair1/PHY/INIT/nr_parms.c
   ${OPENAIR_DIR}/openair1/SCHED_NR/phy_frame_config_nr.c
   ${OPENAIR_DIR}/openair1/SCHED_NR/nr_prach_procedures.c
+  ${OPENAIR_DIR}/openair1/SCHED_NR/nr_ru_procedures.c
   ${OPENAIR_DIR}/openair1/SCHED/phy_procedures_lte_common.c
   ${OPENAIR_DIR}/executables/main_nr_ru.c
 )
 target_link_libraries(nr-oru PRIVATE
-  UTIL SCHED_RU_LIB PHY_COMMON PHY_RU PHY_NR shlib_loader z dl
+  UTIL NR_PHY_RU PHY_NR shlib_loader dl
   radio_common softmodem_common)
 target_link_libraries(nr-oru PRIVATE pthread m CONFIG_LIB rt ${T_LIB} utils
   barrier actor)
@@ -1836,12 +1849,12 @@ add_executable(nr-softmodem
 
 target_link_libraries(nr-softmodem PRIVATE
   -Wl,--start-group
-  UTIL SCTP_CLIENT SCHED_LIB SCHED_RU_LIB SCHED_NR_LIB PHY_NR PHY PHY_COMMON PHY_NR_COMMON PHY_RU GTPV1U SECURITY
-  ITTI ${NAS_UE_LIB} lte_rrc nr_rrc
+  UTIL SCTP_CLIENT SCHED_LIB SCHED_NR_LIB PHY_NR PHY PHY_NR_COMMON NR_PHY_RU GTPV1U SECURITY
+  ITTI ${NAS_UE_LIB} nr_rrc
   ngap s1ap L2_LTE_NR L2_NR MAC_NR_COMMON NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB SIMU
   x2ap f1ap m2ap m3ap e1ap radio_common
   time_management softmodem_common
-  -Wl,--end-group z dl)
+  -Wl,--end-group dl)
 
 target_link_libraries(nr-softmodem PRIVATE pthread m CONFIG_LIB rt)
 target_link_libraries(nr-softmodem PRIVATE ${T_LIB})
@@ -1881,7 +1894,7 @@ target_link_libraries(nr-cuup PRIVATE
                       GTPV1U e1ap f1ap
                       time_management softmodem_common
                       alg
-                      z dl pthread ${T_LIB})
+                      dl pthread ${T_LIB})
 target_link_libraries(nr-cuup PRIVATE asn1_lte_rrc_hdrs asn1_nr_rrc_hdrs)
 if(E2_AGENT)
   target_link_libraries(nr-cuup PRIVATE e2_agent e2_agent_arg e2_ran_func_cuup)
@@ -1905,11 +1918,11 @@ add_executable(nr-uesoftmodem
 
 target_link_libraries(nr-uesoftmodem PRIVATE
   -Wl,--start-group
-  nr_rrc SECURITY UTIL SCHED_RU_LIB SCHED_NR_UE_LIB
-  PHY_COMMON PHY_NR_COMMON PHY_NR_UE NR_L2_UE MAC_NR_COMMON NFAPI_LIB
+  nr_rrc SECURITY UTIL SCHED_NR_UE_LIB
+  PHY_NR_COMMON PHY_NR_UE NR_L2_UE MAC_NR_COMMON NFAPI_LIB
   ITTI SIMU radio_common
   time_management softmodem_common
-  -Wl,--end-group z dl)
+  -Wl,--end-group dl)
 
 target_link_libraries(nr-uesoftmodem PRIVATE pthread m CONFIG_LIB rt nr_ue_phy_meas)
 target_link_libraries(nr-uesoftmodem PRIVATE ${T_LIB})
@@ -1983,14 +1996,14 @@ target_link_libraries(physim_common PRIVATE UTIL)
 
 add_executable(nr_dlschsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/dlschsim.c)
 target_link_libraries(nr_dlschsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${T_LIB} ITTI dl physim_common
   )
 target_link_libraries(nr_dlschsim PRIVATE asn1_nr_rrc_hdrs)
 
 add_executable(nr_pbchsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pbchsim.c)
 target_link_libraries(nr_pbchsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${T_LIB} ITTI dl physim_common
 )
 target_link_libraries(nr_pbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -2000,14 +2013,14 @@ add_executable(nr_psbchsim
   ${NFAPI_USER_DIR}/nfapi.c
   )
 target_link_libraries(nr_psbchsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB -Wl,--end-group
   m pthread ${T_LIB} ITTI dl physim_common softmodem_common
   )
 target_link_libraries(nr_psbchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 add_executable(nr_pucchsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/pucchsim.c)
 target_link_libraries(nr_pucchsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${T_LIB} ITTI dl physim_common
 )
 target_link_libraries(nr_pucchsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -2019,15 +2032,15 @@ add_executable(nr_dlsim
   ${PHY_INTERFACE_DIR}/queue_t.c
   )
 target_link_libraries(nr_dlsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
+  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common NR_L2_UE
   softmodem_common
   )
 target_link_libraries(nr_dlsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
 add_executable(nr_prachsim ${OPENAIR1_DIR}/SIMULATION/NR_PHY/prachsim.c)
 target_link_libraries(nr_prachsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB CONFIG_LIB -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR NR_PHY_RU PHY_NR_UE MAC_NR_COMMON SCHED_NR_LIB CONFIG_LIB -Wl,--end-group
   m pthread ${T_LIB} ITTI dl physim_common)
 target_link_libraries(nr_prachsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
@@ -2035,7 +2048,7 @@ add_executable(nr_ulschsim
   ${OPENAIR1_DIR}/SIMULATION/NR_PHY/ulschsim.c
   )
 target_link_libraries(nr_ulschsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB CONFIG_LIB MAC_NR_COMMON -Wl,--end-group
   m pthread ${T_LIB} ITTI dl physim_common
 )
 target_link_libraries(nr_ulschsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
@@ -2048,8 +2061,8 @@ add_executable(nr_ulsim
   )
 
 target_link_libraries(nr_ulsim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
-  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common softmodem_common
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON CONFIG_LIB L2_NR -Wl,--end-group
+  m pthread ${T_LIB} ITTI dl nr_ue_phy_meas physim_common softmodem_common NR_L2_UE
   )
 target_link_libraries(nr_ulsim PRIVATE asn1_nr_rrc_hdrs asn1_lte_rrc_hdrs)
 
@@ -2059,7 +2072,7 @@ add_executable(nr_srssim
   )
 
 target_link_libraries(nr_srssim PRIVATE
-  -Wl,--start-group UTIL SIMU PHY_COMMON PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON -Wl,--end-group
+  -Wl,--start-group UTIL SIMU PHY_NR_COMMON PHY_NR PHY_NR_UE SCHED_NR_LIB SCHED_NR_UE_LIB MAC_UE_NR MAC_NR_COMMON -Wl,--end-group
   m pthread ITTI dl nr_ue_phy_meas physim_common softmodem_common
   )
 
@@ -2128,7 +2141,7 @@ if (${T_TRACER})
         SECURITY SCHED_LIB SCHED_NR_LIB SCHED_RU_LIB SCHED_UE_LIB SCHED_NR_UE_LIB
         NFAPI_LIB NFAPI_PNF_LIB NFAPI_VNF_LIB NFAPI_USER_LIB
         MISC_NFAPI_LTE_LIB
-        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU
+        PHY_COMMON PHY PHY_UE PHY_NR PHY_NR_COMMON PHY_NR_UE PHY_RU NR_PHY_RU
         L2 L2_LTE L2_NR L2_LTE_NR L2_UE NR_L2_UE MAC_NR_COMMON MAC_UE_NR ngap
         GTPV1U SCTP_CLIENT MME_APP LIB_NAS_UE SIMU
         dfts config_internals nr_common crc_byte)

build/.pre-commit-config.yaml

@@ -0,0 +1,20 @@
+repos:
+  # Clang-Format: Ensures code style is consistent
+  - repo: https://github.com/pre-commit/mirrors-clang-format
+    rev: 'v22.1.3'
+    hooks:
+      - id: clang-format
+
+  # Cppcheck: Static analysis to find bugs
+  - repo: https://github.com/pocc/pre-commit-hooks
+    rev: 'v1.3.5'
+    hooks:
+      - id: cppcheck
+
+  # Basic sanity checks (trailing whitespace, end of file, etc.)
+  - repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: 'v6.0.0'
+    hooks:
+      - id: check-added-large-files
+      - id: check-case-conflict
+      - id: end-of-file-fixer

ci-scripts/Jenkinsfile-GitLab-Container

@@ -219,28 +219,6 @@ pipeline {
             }
           }
         }
-        stage ("cppcheck") {
-          steps {
-            script {
-              triggerSlaveJob ('RAN-cppcheck', 'cppcheck')
-            }
-          }
-          post {
-            always {
-              script {
-                // Using a unique variable name for each test stage to avoid overwriting on a global variable
-                // due to parallel-time concurrency
-                cppcheckStatus = finalizeSlaveJob('RAN-cppcheck')
-              }
-            }
-            failure {
-              script {
-                currentBuild.result = 'FAILURE'
-                failingStages += cppcheckStatus
-              }
-            }
-          }
-        }
         stage ("ARM-Cross-Compile") {
           steps {
             script {

ci-scripts/args_parse.py

@@ -22,7 +22,7 @@ import constants as CONST
 #-----------------------------------------------------------
 
 
-def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):
+def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,CLUSTER):
 
     force_local = False
     date_fmt = None
@@ -53,7 +53,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):
             RAN.ranRepository=matchReg.group(1)
             HTML.ranRepository=matchReg.group(1)
             CONTAINERS.ranRepository=matchReg.group(1)
-            SCA.ranRepository=matchReg.group(1)
             CLUSTER.ranRepository=matchReg.group(1)
         elif re.match(r'^\-\-eNB_AllowMerge=(.+)$|^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE):
             if re.match(r'^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE):
@@ -66,7 +65,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):
                 RAN.ranAllowMerge=True
                 HTML.ranAllowMerge=True
                 CONTAINERS.ranAllowMerge=True
-                SCA.ranAllowMerge=True
                 CLUSTER.ranAllowMerge=True
         elif re.match(r'^\-\-eNBBranch=(.+)$|^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE):
             if re.match(r'^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE):
@@ -77,7 +75,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):
             RAN.ranBranch=matchReg.group(1)
             HTML.ranBranch=matchReg.group(1)
             CONTAINERS.ranBranch=matchReg.group(1)
-            SCA.ranBranch=matchReg.group(1)
             CLUSTER.ranBranch=matchReg.group(1)
         elif re.match(r'^\-\-eNBCommitID=(.*)$|^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE):
             if re.match(r'^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE):
@@ -88,7 +85,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):
             RAN.ranCommitID=matchReg.group(1)
             HTML.ranCommitID=matchReg.group(1)
             CONTAINERS.ranCommitID=matchReg.group(1)
-            SCA.ranCommitID=matchReg.group(1)
             CLUSTER.ranCommitID=matchReg.group(1)
         elif re.match(r'^\-\-eNBTargetBranch=(.*)$|^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE):
             if re.match(r'^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE):
@@ -99,7 +95,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):
             RAN.ranTargetBranch=matchReg.group(1)
             HTML.ranTargetBranch=matchReg.group(1)
             CONTAINERS.ranTargetBranch=matchReg.group(1)
-            SCA.ranTargetBranch=matchReg.group(1)
             CLUSTER.ranTargetBranch=matchReg.group(1)
         elif re.match(r'^\-\-eNBIPAddress=(.+)$|^\-\-eNB[1-2]IPAddress=(.+)$', myArgv, re.IGNORECASE):
             print("parameters --eNB*IPAddress ignored")
@@ -112,7 +107,6 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER):
                 matchReg = re.match(r'^\-\-eNBSourceCodePath=(.+)$', myArgv, re.IGNORECASE)
                 RAN.eNBSourceCodePath=matchReg.group(1)
                 CONTAINERS.eNBSourceCodePath=matchReg.group(1)
-                SCA.eNBSourceCodePath=matchReg.group(1)
                 CLUSTER.eNBSourceCodePath=matchReg.group(1)
             elif re.match(r'^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE):
                 print("parameter --eNB1SourceCodePath ignored")

ci-scripts/ci_infra.yaml

@@ -143,7 +143,7 @@ ltebox-nano:
     - "sudo su -c 'screen -dm -S simulated_hss /opt/hss_sim0609/starthss'"
     - "sleep 1"
     - "sudo /opt/ltebox/tools/start_mme && sudo /opt/ltebox/tools/start_xGw &"
-    - "sleep 1"
+    - "sleep 2"
   Undeploy: "sudo /opt/ltebox/tools/stop_xGw; sudo /opt/ltebox/tools/stop_mme; sudo killall screen"
   LogCollect: "cp /opt/hss_sim0609/hss.log /opt/ltebox/var/log/{mmeLog.0,s1apcLog.0,s1apsLog.0,s11cLog.0,libLog.0,xGwLog.0} %%log_dir%%"
 
@@ -154,7 +154,7 @@ sabox-nepes:
     - "sudo su -c 'screen -dm -S simulated_5g_hss /opt/hss_sim0609/start_5g_hss'"
     - "sleep 1"
     - "sudo /opt/ltebox/tools/start_sabox < /dev/null &> /dev/null"
-    - "sleep 1"
+    - "sleep 2"
   LogCollect: "cp /opt/hss_sim0609/hss.log /opt/ltebox/var/log/{amfLog.0,ngapcLog.0,ngapcommonLog.0,ngapsLog.0,xGwLog.0,upfLog.0} %%log_dir%%"
   Undeploy: "sudo /opt/ltebox/tools/stop_sabox; sudo killall screen"
 
@@ -165,7 +165,7 @@ ltebox-nepes:
     - "sudo su -c 'screen -dm -S simulated_hss /opt/hss_sim0609/starthss'"
     - "sleep 1"
     - "sudo /opt/ltebox/tools/start_mme && sudo /opt/ltebox/tools/start_xGw &"
-    - "sleep 1"
+    - "sleep 2"
   Undeploy: "sudo /opt/ltebox/tools/stop_xGw; sudo /opt/ltebox/tools/stop_mme; sudo killall screen"
   LogCollect: "cp /opt/hss_sim0609/hss.log /opt/ltebox/var/log/{mmeLog.0,s1apcLog.0,s1apsLog.0,s11cLog.0,libLog.0,xGwLog.0} %%log_dir%%"
 

ci-scripts/cls_containerize.py

@@ -184,11 +184,6 @@ class Containerize():
 		self.services = ''
 		self.deploymentTag = ''
 
-		self.cli = ''
-		self.cliBuildOptions = ''
-		self.dockerfileprefix = ''
-		self.host = ''
-
 		self.num_attempts = 1
 
 		self.flexricTag = ''
@@ -203,18 +198,7 @@ class Containerize():
 		cmd = cls_cmd.getConnection(node)
 		log_files = []
 	
-		# Checking the hostname to get adapted on cli and dockerfileprefixes
-		cmd.run('hostnamectl')
-		result = re.search('Ubuntu|Red Hat', cmd.getBefore())
-		self.host = result.group(0)
-		if self.host == 'Ubuntu':
-			self.cli = 'docker'
-			self.dockerfileprefix = '.ubuntu'
-			self.cliBuildOptions = ''
-		elif self.host == 'Red Hat':
-			self.cli = 'sudo podman'
-			self.dockerfileprefix = '.rhel9'
-			self.cliBuildOptions = '--disable-compression'
+		dockerfileprefix = '.ubuntu'
 
 		# we always build the ran-build image with all targets
 		# Creating a tupple with the imageName, the DockerFile prefix pattern, targetName and sanitized option
@@ -232,23 +216,20 @@ class Containerize():
 			imageNames.append(('oai-nr-cuup', 'nr-cuup', 'oai-nr-cuup', ''))
 			imageNames.append(('oai-lte-ue', 'lteUE', 'oai-lte-ue', ''))
 			imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue', ''))
-			if self.host == 'Red Hat':
-				imageNames.append(('oai-physim', 'phySim', 'oai-physim', ''))
-			if self.host == 'Ubuntu':
-				imageNames.append(('oai-lte-ru', 'lteRU', 'oai-lte-ru', ''))
-				# Building again the 5G images with Address Sanitizer
-				imageNames.append(('ran-build', 'build', 'ran-build-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-				imageNames.append(('oai-enb', 'eNB', 'oai-enb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-				imageNames.append(('oai-gnb', 'gNB', 'oai-gnb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-				imageNames.append(('oai-lte-ue', 'lteUE', 'oai-lte-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-				imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-				imageNames.append(('oai-nr-cuup', 'nr-cuup', 'oai-nr-cuup-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
-				imageNames.append(('ran-build-fhi72', 'build.fhi72', 'ran-build-fhi72', ''))
-				imageNames.append(('oai-gnb', 'gNB.fhi72', 'oai-gnb-fhi72', ''))
-				imageNames.append(('oai-nr-oru', 'nrORU.fhi72', 'oai-nr-oru', ''))
+			imageNames.append(('oai-lte-ru', 'lteRU', 'oai-lte-ru', ''))
+			# Building again the 5G images with Address Sanitizer
+			imageNames.append(('ran-build', 'build', 'ran-build-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+			imageNames.append(('oai-enb', 'eNB', 'oai-enb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+			imageNames.append(('oai-gnb', 'gNB', 'oai-gnb-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+			imageNames.append(('oai-lte-ue', 'lteUE', 'oai-lte-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+			imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+			imageNames.append(('oai-nr-cuup', 'nr-cuup', 'oai-nr-cuup-asan', '--build-arg "BUILD_OPTION=--sanitize"'))
+			imageNames.append(('ran-build-fhi72', 'build.fhi72', 'ran-build-fhi72', ''))
+			imageNames.append(('oai-gnb', 'gNB.fhi72', 'oai-gnb-fhi72', ''))
+			imageNames.append(('oai-nr-oru', 'nrORU.fhi72', 'oai-nr-oru', ''))
 		result = re.search('build_cross_arm64', self.imageKind)
 		if result is not None:
-			self.dockerfileprefix = '.ubuntu.cross-arm64'
+			dockerfileprefix = '.ubuntu.cross-arm64'
 		result = re.search('native_armv9', self.imageKind)
 		if result is not None:
 			imageNames.append(('oai-gnb', 'gNB', 'oai-gnb', ''))
@@ -263,10 +244,6 @@ class Containerize():
 			imageNames.append(('oai-nr-ue', 'nrUE', 'oai-nr-ue', ''))
 		
 		cmd.cd(lSourcePath)
-		# if asterix, copy the entitlement and subscription manager configurations
-		if self.host == 'Red Hat':
-			cmd.run('mkdir -p ./etc-pki-entitlement')
-			cmd.run('cp /etc/pki/entitlement/*.pem ./etc-pki-entitlement/')
 
 		baseImage = 'ran-base'
 		baseTag = 'develop'
@@ -275,7 +252,7 @@ class Containerize():
 		if (self.ranAllowMerge):
 			imageTag = 'ci-temp'
 			if self.ranTargetBranch == 'develop':
-				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base{self.dockerfileprefix} | grep --colour=never -i INDEX')
+				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base{dockerfileprefix} | grep --colour=never -i INDEX')
 				result = re.search('index', cmd.getBefore())
 				if result is not None:
 					forceBaseImageBuild = True
@@ -289,31 +266,30 @@ class Containerize():
 			forceBaseImageBuild = True
 
 		# Let's remove any previous run artifacts if still there
-		cmd.run(f"{self.cli} image prune --force")
+		cmd.run(f"docker image prune --force")
 		for image,pattern,name,option in imageNames:
-			cmd.run(f"{self.cli} image rm {name}:{imageTag}", reportNonZero=False)
+			cmd.run(f"docker image rm {name}:{imageTag}", reportNonZero=False)
 
 		cmd.run(f'docker login -u oaicicd -p oaicicd {DEFAULT_REGISTRY}')
 		ubuntuImage = "ubuntu:noble"
 		# Build the base image only on Push Events (not on Merge Requests)
 		# On when the base image docker file is being modified.
 		if forceBaseImageBuild:
-			cmd.run(f"{self.cli} image rm {baseImage}:{baseTag}")
+			cmd.run(f"docker image rm {baseImage}:{baseTag}")
 			logfile = f'{lSourcePath}/cmake_targets/log/ran-base.docker.log'
-			if self.host == 'Ubuntu':
-				option = f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
-			cmd.run(f"{self.cli} build {self.cliBuildOptions} --target {baseImage} --tag {baseImage}:{baseTag} --file docker/Dockerfile.base{self.dockerfileprefix} {option} . &> {logfile}", timeout=1600)
+			option = f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
+			cmd.run(f"docker build --target {baseImage} --tag {baseImage}:{baseTag} --file docker/Dockerfile.base{dockerfileprefix} {option} . &> {logfile}", timeout=1600)
 			t = ("ran-base", archiveArtifact(cmd, ctx, logfile))
 			log_files.append(t)
 
 		# First verify if the base image was properly created.
-		ret = cmd.run(f"{self.cli} image inspect --format=\'Size = {{{{.Size}}}} bytes\' {baseImage}:{baseTag}")
+		ret = cmd.run(f"docker image inspect --format=\'Size = {{{{.Size}}}} bytes\' {baseImage}:{baseTag}")
 		allImagesSize = {}
 		if ret.returncode != 0:
 			logging.error('\u001B[1m Could not build properly ran-base\u001B[0m')
 			# Recover the name of the failed container?
-			cmd.run(f"{self.cli} ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty {self.cli} rm -f")
-			cmd.run(f"{self.cli} image prune --force")
+			cmd.run(f"docker ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty docker rm -f")
+			cmd.run(f"docker image prune --force")
 			cmd.close()
 			logging.error('\u001B[1m Building OAI Images Failed\u001B[0m')
 			HTML.CreateHtmlTestRow(self.imageKind, 'KO', CONST.ALL_PROCESSES_OK)
@@ -333,32 +309,31 @@ class Containerize():
 		for image,pattern,name,option in imageNames:
 			# the archived Dockerfiles have "ran-base:latest" as base image
 			# we need to update them with proper tag
-			cmd.run(f'git checkout -- docker/Dockerfile.{pattern}{self.dockerfileprefix}')
-			cmd.run(f'sed -i -e "s#{baseImage}:latest#{baseImage}:{baseTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
+			cmd.run(f'git checkout -- docker/Dockerfile.{pattern}{dockerfileprefix}')
+			cmd.run(f'sed -i -e "s#{baseImage}:latest#{baseImage}:{baseTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
 			# target images should use the proper ran-build image
 			if image != 'ran-build' and "-asan" in name:
-				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build-asan:{imageTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
+				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build-asan:{imageTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
 			elif "fhi72" in name or name == "oai-nr-oru":
-				cmd.run(f'sed -i -e "s#ran-build-fhi72:latest#ran-build-fhi72:{imageTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
+				cmd.run(f'sed -i -e "s#ran-build-fhi72:latest#ran-build-fhi72:{imageTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
 			elif image != 'ran-build':
-				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build:{imageTag}#" docker/Dockerfile.{pattern}{self.dockerfileprefix}')
+				cmd.run(f'sed -i -e "s#ran-build:latest#ran-build:{imageTag}#" docker/Dockerfile.{pattern}{dockerfileprefix}')
 			if image == 'oai-gnb-aerial':
 				cmd.run('cp -f /opt/nvidia-ipc/nvipc_src.2026.01.07.tar.gz .')
 			logfile = f'{lSourcePath}/cmake_targets/log/{name}.docker.log'
-			if self.host == 'Ubuntu':
-				option = option + f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
-			ret = cmd.run(f'{self.cli} build {self.cliBuildOptions} --target {image} --tag {name}:{imageTag} --file docker/Dockerfile.{pattern}{self.dockerfileprefix} {option} . > {logfile} 2>&1', timeout=1200)
+			option = option + f" --build-arg UBUNTU_IMAGE={DEFAULT_REGISTRY}/{ubuntuImage}"
+			ret = cmd.run(f'docker build --target {image} --tag {name}:{imageTag} --file docker/Dockerfile.{pattern}{dockerfileprefix} {option} . > {logfile} 2>&1', timeout=1200)
 			t = (name, archiveArtifact(cmd, ctx, logfile))
 			log_files.append(t)
 			if image == 'oai-gnb-aerial':
 				cmd.run('rm -f nvipc_src.2026.01.07.tar.gz')
 			# check the status of the build
-			ret = cmd.run(f"{self.cli} image inspect --format=\'Size = {{{{.Size}}}} bytes\' {name}:{imageTag}")
+			ret = cmd.run(f"docker image inspect --format=\'Size = {{{{.Size}}}} bytes\' {name}:{imageTag}")
 			if ret.returncode != 0:
 				logging.error('\u001B[1m Could not build properly ' + name + '\u001B[0m')
 				status = False
 				# Here we should check if the last container corresponds to a failed command and destroy it
-				cmd.run(f"{self.cli} ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty {self.cli} rm -f")
+				cmd.run(f"docker ps --quiet --filter \"status=exited\" -n1 | xargs --no-run-if-empty docker rm -f")
 				allImagesSize[name] = 'N/A -- Build Failed'
 				break
 			else:
@@ -372,16 +347,16 @@ class Containerize():
 					logging.debug(f'{name} size is unknown')
 					allImagesSize[name] = 'unknown'
 			# Now pruning dangling images in between target builds
-			cmd.run(f"{self.cli} image prune --force")
+			cmd.run(f"docker image prune --force")
 		cmd.run(f'docker logout {DEFAULT_REGISTRY}')
 		# Remove all intermediate build images and clean up
-		cmd.run(f"{self.cli} image rm ran-build:{imageTag} ran-build-asan:{imageTag} ran-build-fhi72:{imageTag} || true")
-		cmd.run(f"{self.cli} volume prune --force")
+		cmd.run(f"docker image rm ran-build:{imageTag} ran-build-asan:{imageTag} ran-build-fhi72:{imageTag} || true")
+		cmd.run(f"docker volume prune --force")
 
 		# Remove some cached artifacts to prevent out of diskspace problem
 		logging.debug(cmd.run("df -h").stdout)
 		logging.debug(cmd.run("docker system df").stdout)
-		cmd.run(f"{self.cli} buildx prune --filter until=1h --force")
+		cmd.run(f"docker buildx prune --filter until=1h --force")
 		logging.debug(cmd.run("df -h").stdout)
 		logging.debug(cmd.run("docker system df").stdout)
 
@@ -489,20 +464,12 @@ class Containerize():
 		cmd = cls_cmd.getConnection(node)
 		cmd.cd(lSourcePath)
 
-		ret = cmd.run('hostnamectl')
-		result = re.search('Ubuntu', ret.stdout)
-		host = result.group(0)
-		if host != 'Ubuntu':
-			cmd.close()
-			raise Exception("Can build unit tests only on Ubuntu server")
-		logging.debug('running on Ubuntu as expected')
-
 		# check that ran-base image exists as we expect it
 		baseImage = 'ran-base'
 		baseTag = 'develop'
 		if self.ranAllowMerge:
 			if self.ranTargetBranch == 'develop':
-				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base{self.dockerfileprefix} | grep --colour=never -i INDEX')
+				cmd.run(f'git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base.ubuntu | grep --colour=never -i INDEX')
 				result = re.search('index', cmd.getBefore())
 				if result is not None:
 					baseTag = 'ci-temp'

ci-scripts/cls_oai_html.py

@@ -379,90 +379,6 @@ class HTMLManagement():
 			self.htmlFile.write('      </tr>\n')
 			self.htmlFile.close()
 
-	def CreateHtmlTestRowCppCheckResults(self, CCR):
-		if (self.htmlFooterCreated or (not self.htmlHeaderCreated)):
-			return
-		self.htmlFile = open('test_results.html', 'a')
-		vId = 0
-		for version in CCR.versions:
-			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
-			self.htmlFile.write('        <td colspan="6"><b> Results for cppcheck v ' + version + ' </b></td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> NB ERRORS</b></td>\n')
-			if CCR.nbErrors[vId] == 0:
-				myColor = 'lightgreen'
-			elif CCR.nbErrors[vId] < 20:
-				myColor = 'orange'
-			else:
-				myColor = 'lightcoral'
-			self.htmlFile.write('        <td colspan="3" bgcolor = "' + myColor + '"><b>' + str(CCR.nbErrors[vId]) + '</b></td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> NB WARNINGS</b></td>\n')
-			if CCR.nbWarnings[vId] == 0:
-				myColor = 'lightgreen'
-			elif CCR.nbWarnings[vId] < 20:
-				myColor = 'orange'
-			else:
-				myColor = 'lightcoral'
-			self.htmlFile.write('        <td colspan="3" bgcolor = "' + myColor + '"><b>' + str(CCR.nbWarnings[vId]) + '</b></td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
-			self.htmlFile.write('        <td colspan="6"> ----------------- </td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Memory leak</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbMemLeaks[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Possible null pointer deference</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbNullPtrs[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Uninitialized variable</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbUninitVars[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Undefined behaviour shifting</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbTooManyBitsShift[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Signed integer overflow</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbIntegerOverflow[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr bgcolor = "#F0F0F0" >\n')
-			self.htmlFile.write('        <td colspan="6"> </td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Printf formatting issues</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbInvalidPrintf[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Modulo result is predetermined</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbModuloAlways[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Opposite Condition -> dead code</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbOppoInnerCondition[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			self.htmlFile.write('      <tr>\n')
-			self.htmlFile.write('        <td></td>\n')
-			self.htmlFile.write('        <td colspan="2" bgcolor = "lightcyan" ><b> Wrong Scanf Nb Args</b></td>\n')
-			self.htmlFile.write('        <td colspan="3">' + str(CCR.nbWrongScanfArg[vId]) + '</td>\n')
-			self.htmlFile.write('      </tr>\n')
-			vId += 1
-
 	def CreateHtmlTestRowPhySimTestResult(self, testSummary, testResult):
 		if (self.htmlFooterCreated or (not self.htmlHeaderCreated)):
 			return

ci-scripts/cls_static_code_analysis.py

@@ -27,160 +27,30 @@ import constants as CONST
 import cls_cmd
 from cls_ci_helper import archiveArtifact
 
-#-----------------------------------------------------------
-# Class Declaration
-#-----------------------------------------------------------
-class CppCheckResults():
-
-	def __init__(self):
-
-		self.variants = ['bionic', 'focal']
-		self.versions = ['','']
-		self.nbErrors = [0,0]
-		self.nbWarnings = [0,0]
-		self.nbNullPtrs = [0,0]
-		self.nbMemLeaks = [0,0]
-		self.nbUninitVars = [0,0]
-		self.nbInvalidPrintf = [0,0]
-		self.nbModuloAlways = [0,0]
-		self.nbTooManyBitsShift = [0,0]
-		self.nbIntegerOverflow = [0,0]
-		self.nbWrongScanfArg = [0,0]
-		self.nbPtrAddNotNull = [0,0]
-		self.nbOppoInnerCondition = [0,0]
-
 class StaticCodeAnalysis():
 
-	def __init__(self):
-
-		self.ranRepository = ''
-		self.ranBranch = ''
-		self.ranAllowMerge = False
-		self.ranCommitID = ''
-		self.ranTargetBranch = ''
-		self.eNBSourceCodePath = ''
-
-	def CppCheckAnalysis(self, ctx, node, HTML):
-		if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '':
-			HELP.GenericHelp(CONST.Version)
-			sys.exit('Insufficient Parameter')
-		lSourcePath = self.eNBSourceCodePath
-
-		if not lSourcePath or not node:
-			raise ValueError(f"{lSourcePath=} {node=}")
-		logging.debug('Building on server: ' + node)
-		cmd = cls_cmd.getConnection(node)
-		# on RedHat/CentOS .git extension is mandatory
-		result = re.search(r'([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
-		if result is not None:
-			full_ran_repo_name = self.ranRepository.replace('git/', 'git')
-		else:
-			full_ran_repo_name = self.ranRepository + '.git'
-
-		cmd.cd(lSourcePath)
-		logDir = f'{lSourcePath}/cmake_targets/log'
-		cmd.run(f'mkdir -p {logDir}')
-		cmd.run('docker image rm oai-cppcheck:bionic oai-cppcheck:focal')
-		cmd.run(f'sed -e "s@xenial@bionic@" {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.xenial > {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.bionic')
-		cmd.run(f'docker build --tag oai-cppcheck:bionic --file {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.bionic . > {logDir}/cppcheck-bionic.txt 2>&1')
-		cmd.run(f'sed -e "s@xenial@focal@" {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.xenial > {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.focal')
-		cmd.run(f'docker build --tag oai-cppcheck:focal --file {lSourcePath}/ci-scripts/docker/Dockerfile.cppcheck.focal . > {logDir}/cppcheck-focal.txt 2>&1')
-		cmd.run('docker image rm oai-cppcheck:bionic oai-cppcheck:focal')
-
-		bionic = archiveArtifact(cmd, ctx, f'{logDir}/cppcheck-bionic.txt')
-		focal = archiveArtifact(cmd, ctx, f'{logDir}/cppcheck-focal.txt')
-		cmd.close()
-
-		CCR = CppCheckResults()
-		CCR_ref = CppCheckResults()
-		vId = 0
-		for variant in CCR.variants:
-			filename = ctx.baseFilename() + '-cppcheck-'+ variant + '.txt'
-			logging.info(f"will check file '{filename}'")
-			if not os.path.isfile(filename):
-				raise FileNotFoundError(f"{filename} is not a file")
-			else:
-				xmlStart = False
-				with open(filename, 'r') as logfile:
-					for line in logfile:
-						ret = re.search(r'cppcheck version="(?P<version>[0-9\.]+)"', str(line))
-						if ret is not None:
-						   CCR.versions[vId] = ret.group('version')
-						if re.search('RUN cat cmake_targets/log/cppcheck.xml', str(line)) is not None:
-							xmlStart = True
-						if xmlStart:
-							if re.search('severity="error"', str(line)) is not None:
-								CCR.nbErrors[vId] += 1
-							if re.search('severity="warning"', str(line)) is not None:
-								CCR.nbWarnings[vId] += 1
-							if re.search('id="memleak"', str(line)) is not None:
-								CCR.nbMemLeaks[vId] += 1
-							if re.search('id="nullPointer"', str(line)) is not None:
-								CCR.nbNullPtrs[vId] += 1
-							if re.search('id="uninitvar"', str(line)) is not None:
-								CCR.nbUninitVars[vId] += 1
-							if re.search('id="invalidPrintfArgType_sint"|id="invalidPrintfArgType_uint"', str(line)) is not None:
-								CCR.nbInvalidPrintf[vId] += 1
-							if re.search('id="moduloAlwaysTrueFalse"', str(line)) is not None:
-								CCR.nbModuloAlways[vId] += 1
-							if re.search('id="shiftTooManyBitsSigned"', str(line)) is not None:
-								CCR.nbTooManyBitsShift[vId] += 1
-							if re.search('id="integerOverflow"', str(line)) is not None:
-								CCR.nbIntegerOverflow[vId] += 1
-							if re.search('id="wrongPrintfScanfArgNum"|id="invalidScanfArgType_int"', str(line)) is not None:
-								CCR.nbWrongScanfArg[vId] += 1
-							if re.search('id="pointerAdditionResultNotNull"', str(line)) is not None:
-								CCR.nbPtrAddNotNull[vId] += 1
-							if re.search('id="oppositeInnerCondition"', str(line)) is not None:
-								CCR.nbOppoInnerCondition[vId] += 1
-			vMsg  = ''
-			vMsg += '========  Variant ' + variant + ' - ' + CCR.versions[vId] + ' ========\n'
-			vMsg += '   ' + str(CCR.nbErrors[vId]) + ' errors\n'
-			vMsg += '   ' + str(CCR.nbWarnings[vId]) + ' warnings\n'
-			vMsg += '  -- Details --\n'
-			vMsg += '   Memory leak:                     ' + str(CCR.nbMemLeaks[vId]) + '\n'
-			vMsg += '   Possible null pointer deference: ' + str(CCR.nbNullPtrs[vId]) + '\n'
-			vMsg += '   Uninitialized variable:          ' + str(CCR.nbUninitVars[vId]) + '\n'
-			vMsg += '   Undefined behaviour shifting:    ' + str(CCR.nbTooManyBitsShift[vId]) + '\n'
-			vMsg += '   Signed integer overflow:         ' + str(CCR.nbIntegerOverflow[vId]) + '\n'
-			vMsg += '\n'
-			vMsg += '   Printf formatting issue:         ' + str(CCR.nbInvalidPrintf[vId]) + '\n'
-			vMsg += '   Modulo result is predetermined:  ' + str(CCR.nbModuloAlways[vId]) + '\n'
-			vMsg += '   Opposite Condition -> dead code: ' + str(CCR.nbOppoInnerCondition[vId]) + '\n'
-			vMsg += '   Wrong Scanf Nb Args:             ' + str(CCR.nbWrongScanfArg[vId]) + '\n'
-			for vLine in vMsg.split('\n'):
-				logging.debug(vLine)
-			vId += 1
-
-		HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK)
-		HTML.CreateHtmlTestRowCppCheckResults(CCR)
-		logging.info('\u001B[1m Static Code Analysis Pass\u001B[0m')
-
-		return True
-
-	def LicenceAndFormattingCheck(self, ctx, node, HTML):
+	def LicenceAndFormattingCheck(ctx, node, HTML, d, branch, allowMerge, targetBranch):
 		# Workspace is no longer recreated from scratch.
 		# It implies that this method shall be called last within a build pipeline
 		# where workspace is already created
-		lSourcePath = self.eNBSourceCodePath
 
-		if not node or not lSourcePath:
-			raise ValueError(f"{lSourcePath=} {node=}")
+		if not node or not d:
+			raise ValueError(f"{d=} {node=}")
 		logging.debug('Building on server: ' + node)
 		cmd = cls_cmd.getConnection(node)
 		check_options = ''
-		if self.ranAllowMerge:
-			check_options = f'--build-arg MERGE_REQUEST=true --build-arg SRC_BRANCH={self.ranBranch}'
-			if self.ranTargetBranch == '':
-				if self.ranBranch != 'develop' and self.ranBranch != 'origin/develop':
+		if allowMerge:
+			check_options = f'--build-arg MERGE_REQUEST=true --build-arg SRC_BRANCH={branch}'
+			if targetBranch == '':
+				if branch != 'develop' and branch != 'origin/develop':
 					check_options += ' --build-arg TARGET_BRANCH=develop'
 			else:
-				check_options += f' --build-arg TARGET_BRANCH={self.ranTargetBranch}'
+				check_options += f' --build-arg TARGET_BRANCH={targetBranch}'
 
-		logDir = f'{lSourcePath}/cmake_targets/log/'
+		logDir = f'{d}/cmake_targets/log/'
 		cmd.run(f'mkdir -p {logDir}')
 		cmd.run('docker image rm oai-formatting-check:latest')
-		cmd.run(f'docker build --target oai-formatting-check --tag oai-formatting-check:latest {check_options} --file {lSourcePath}/ci-scripts/docker/Dockerfile.formatting.ubuntu {lSourcePath} > {logDir}/oai-formatting-check.txt 2>&1')
+		cmd.run(f'docker build --target oai-formatting-check --tag oai-formatting-check:latest {check_options} --file {d}/ci-scripts/docker/Dockerfile.formatting.ubuntu {d} > {logDir}/oai-formatting-check.txt 2>&1')
 
 		cmd.run('docker image rm oai-formatting-check:latest')
 		cmd.run('docker image prune --force')

ci-scripts/conf_files/gnb-cu.sa.band78.106prb.conf

@@ -17,6 +17,7 @@ gNBs =
     // Tracking area code, 0x0000 and 0xfffe are reserved values
     tracking_area_code  =  1;
     plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+    cu_sibs = ( 2, 3, 4 );
     @include "neighbour-config.conf"
 
     nr_cellid = 12345678L;

ci-scripts/conf_files/neighbour-config.conf

@@ -5,6 +5,57 @@
 #  for the 2-cell rfsim setup (gNB_ID 0xe00 & 0xb00)       #
 ############################################################
 
+############################################################
+#                           SIB2                           #
+############################################################
+
+sib2_config : {
+  q_Hyst                   = 0;
+  cellReselectionPriority  = 0;
+  threshServingLowP        = 0;
+  threshServingLowQ        = 0;
+  s_NonIntraSearchP        = -1;
+  s_NonIntraSearchQ        = -1;
+  q_RxLevMin               = -56;
+  q_QualMin                = -1;
+  s_IntraSearchP           = 22;
+  s_IntraSearchQ           = -1;
+  t_ReselectionNR          = 1;
+  deriveSSB_IndexFromCell  = 1;
+
+  speed_t_Evaluation       = 0;
+  speed_t_HystNormal       = 0;
+  speed_n_CellChangeMedium = 1;
+  speed_n_CellChangeHigh   = 2;
+  speed_sf_Medium          = 1;
+  speed_sf_High            = 0;
+};
+
+############################################################
+#      Per-frequency SIB4 inter-frequency configuration    #
+############################################################
+
+frequency_list = (
+  {
+    absoluteFrequencySSB = 621312;
+    subcarrierSpacing    = 1; # 30 kHz
+    band                 = 78;
+
+    frequency_config = (
+      {
+        cellReselectionPriority = 5;
+        threshX_HighP           = 10;
+        threshX_LowP            = 6;
+        threshX_HighQ           = -1;
+        threshX_LowQ            = -1;
+        q_OffsetFreq            = 0;
+        q_RxLevMin              = -56;
+        t_ReselectionNR         = 1;
+      }
+    );
+  }
+);
+
 neighbour_list = (
   ##########################################################
   #      Entry USED BY gNB_ID = 0xe00  (nr_cellid = 1)     #
@@ -21,6 +72,9 @@ neighbour_list = (
         band                = 78;
         plmn                = { mcc = 208; mnc = 99; mnc_length = 2 };
         tracking_area_code  = 1;
+        q_OffsetCell        = 2;
+        q_RxLevMinOffsetCell= 2;
+        q_QualMinOffsetCell = 1;
       }
     );
   },
@@ -40,6 +94,9 @@ neighbour_list = (
         band                = 78;
         plmn                = { mcc = 208; mnc = 99; mnc_length = 2 };
         tracking_area_code  = 1;
+        q_OffsetCell        = 2;
+        q_RxLevMinOffsetCell= 2;
+        q_QualMinOffsetCell = 1;
       }
     );
   }

ci-scripts/docker/Dockerfile.cppcheck.xenial

@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: LicenseRef-CSSL-1.0
-
-#---------------------------------------------------------------------
-#
-# Dockerfile for the Open-Air-Interface BUILD service
-#   Valid for Ubuntu 22.04
-#
-#---------------------------------------------------------------------
-FROM ubuntu:xenial AS oai-cppcheck
-
-
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN apt-get update && \
-    apt-get upgrade --yes && \
-    apt-get install --yes \
-       build-essential \
-       vim \
-       cppcheck
-
-WORKDIR /oai-ran
-COPY . .
-
-WORKDIR /oai-ran/common/utils/T
-RUN make
-
-WORKDIR /oai-ran
-RUN mkdir -p cmake_targets/log && \
-    cppcheck --enable=warning --force --xml --xml-version=2 \
-        --inline-suppr \
-        -i openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c \
-        --suppressions-list=ci-scripts/cppcheck_suppressions.list \
-        -I common/utils \
-        -I openair3/NAS/COMMON/UTIL \
-        -j`nproc` . 2> cmake_targets/log/cppcheck.xml 1> cmake_targets/log/cppcheck_build.txt
-
-RUN grep -E -c 'severity="error' cmake_targets/log/cppcheck.xml
-
-RUN grep -E -c 'severity="warning' cmake_targets/log/cppcheck.xml
-
-RUN cat cmake_targets/log/cppcheck.xml

ci-scripts/main.py

@@ -22,7 +22,7 @@ import constants as CONST
 
 import cls_oaicitest		 #main class for OAI CI test framework
 import cls_containerize	 #class Containerize for all container-based operations on RAN/UE objects
-import cls_static_code_analysis  #class for static code analysis
+import cls_static_code_analysis as SCA
 import cls_cluster		 # class for building/deploying on cluster
 import cls_native        # class for all native/source-based operations
 from cls_ci_helper import TestCaseCtx
@@ -64,7 +64,6 @@ def ExecuteActionWithParam(action, ctx, node):
 	global RAN
 	global HTML
 	global CONTAINERS
-	global SCA
 	global CLUSTER
 	if action == 'Build_eNB' or action == 'Build_Image' or action == 'Build_Proxy' or action == "Build_Cluster_Image" or action == "Build_Run_Tests":
 		RAN.Build_eNB_args=test.findtext('Build_eNB_args')
@@ -196,10 +195,7 @@ def ExecuteActionWithParam(action, ctx, node):
 			success = CONTAINERS.Create_Workspace(node, HTML)
 
 	elif action == 'LicenceAndFormattingCheck':
-		success = SCA.LicenceAndFormattingCheck(ctx, node, HTML)
-
-	elif action == 'Cppcheck_Analysis':
-		success = SCA.CppCheckAnalysis(ctx, node, HTML)
+		success = SCA.StaticCodeAnalysis.LicenceAndFormattingCheck(ctx, node, HTML, RAN.eNBSourceCodePath, RAN.ranBranch, RAN.ranAllowMerge, RAN.ranTargetBranch)
 
 	elif action == 'Push_Local_Registry':
 		tag_prefix = test.findtext('tag_prefix') or ""
@@ -297,7 +293,6 @@ CiTestObj = cls_oaicitest.OaiCiTest()
 RAN = ran.RANManagement()
 HTML = cls_oai_html.HTMLManagement()
 CONTAINERS = cls_containerize.Containerize()
-SCA = cls_static_code_analysis.StaticCodeAnalysis()
 CLUSTER = cls_cluster.Cluster()
 
 #-----------------------------------------------------------
@@ -307,7 +302,7 @@ CLUSTER = cls_cluster.Cluster()
 import args_parse
 # Force local execution, move all execution targets to localhost
 force_local = False
-mode, force_local, date_fmt = args_parse.ArgsParse(sys.argv,CiTestObj,RAN,HTML,CONTAINERS,HELP,SCA,CLUSTER)
+mode, force_local, date_fmt = args_parse.ArgsParse(sys.argv,CiTestObj,RAN,HTML,CONTAINERS,HELP,CLUSTER)
 fmt = "%(levelname)8s: %(message)s"
 if date_fmt:
     fmt = "[%(asctime)s] %(levelname)s %(message)s"

ci-scripts/xml_class_list.yml

@@ -23,7 +23,6 @@
   - Deploy_Object
   - Stop_Object
   - Undeploy_Object
-  - Cppcheck_Analysis
   - Deploy_Run_OC_PhySim
   - Build_Deploy_PhySim
   - LicenceAndFormattingCheck

ci-scripts/xml_files/cppcheck.xml

@@ -1,20 +0,0 @@
-<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->
-
-<testCaseList>
-  <htmlTabRef>build-tab</htmlTabRef>
-  <htmlTabName>CPPCHECK Analysis</htmlTabName>
-  <htmlTabIcon>wrench</htmlTabIcon>
-
-  <testCase>
-    <class>Create_Workspace</class>
-    <desc>Create new Workspace</desc>
-    <node>carabe</node>
-  </testCase>
-
-  <testCase>
-    <class>Cppcheck_Analysis</class>
-    <desc>Static Code Analysis with cppcheck</desc>
-    <node>carabe</node>
-  </testCase>
-
-</testCaseList>

ci-scripts/yaml_files/4g_l2sim_fdd/docker-compose.yml

@@ -166,7 +166,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: l2sim4g-trf-gen
         networks:

ci-scripts/yaml_files/4g_rfsimulator_fdd_05MHz/docker-compose.yml

@@ -166,7 +166,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: rfsim4g-trf-gen
         networks:

ci-scripts/yaml_files/4g_rfsimulator_fdd_10MHz/docker-compose.yml

@@ -166,7 +166,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: rfsim4g-trf-gen
         networks:

ci-scripts/yaml_files/4g_rfsimulator_fdd_20MHz/docker-compose.yml

@@ -166,7 +166,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: rfsim4g-trf-gen
         networks:

ci-scripts/yaml_files/4g_rfsimulator_tdd_05MHz/docker-compose.yml

@@ -166,7 +166,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: rfsim4g-trf-gen
         networks:

ci-scripts/yaml_files/5g_f1_rfsimulator/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -75,7 +75,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_fdd_rfsimulator/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_rfsimulator/README.md

@@ -38,11 +38,11 @@ Password:
 Now pull images.
 
 ```bash
-$ docker pull mysql:8.0
-$ docker pull oaisoftwarealliance/oai-amf:v2.1.10
-$ docker pull oaisoftwarealliance/oai-smf:v2.1.10
-$ docker pull oaisoftwarealliance/oai-upf:v2.1.10
-$ docker pull oaisoftwarealliance/trf-gen-cn5g:focal
+$ docker pull mysql:9.6
+$ docker pull oaisoftwarealliance/oai-amf:v2.2.1
+$ docker pull oaisoftwarealliance/oai-smf:v2.2.1
+$ docker pull oaisoftwarealliance/oai-upf:v2.2.1
+$ docker pull oaisoftwarealliance/trf-gen-cn5g:latest
 
 $ docker pull oaisoftwarealliance/oai-gnb:develop
 $ docker pull oaisoftwarealliance/oai-nr-ue:develop
@@ -570,7 +570,7 @@ runs the gnb service with modified gNB executable.
 ```bash
 docker compose -f docker-compose.yaml -f local-override.yaml up -d oai-gnb
 ```
-This command rebuilds both the gNB & nrUE and runs the oai-nr-ue container with 
+This command rebuilds both the gNB & nrUE and runs the oai-nr-ue container with
 modified nrUE executable.
 ```bash
 docker compose -f docker-compose.yaml -f local-override.yaml up -d oai-nr-ue

ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ./oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_rfsimulator_24prb/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_rfsimulator_2x2/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_rfsimulator_e1/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris

ci-scripts/yaml_files/5g_rfsimulator_fr2_66prb/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_rfsimulator_multiue/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
             - ../5g_rfsimulator/mysql-healthcheck.sh:/tmp/mysql-healthcheck.sh
@@ -23,7 +23,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -35,7 +35,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -47,7 +47,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -70,7 +70,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
               "ip route add 12.1.1.0/24 via 192.168.72.134 dev eth0; sleep infinity"

ci-scripts/yaml_files/5g_rfsimulator_n2_ho/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
             - ../5g_rfsimulator/mysql-healthcheck.sh:/tmp/mysql-healthcheck.sh
@@ -23,7 +23,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:ci-tmp-pr-372-26c14bcd
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -35,7 +35,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.9
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -47,7 +47,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.9
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -70,7 +70,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
               "ip route add 12.1.1.0/24 via 192.168.72.134 dev eth0; sleep infinity"

ci-scripts/yaml_files/5g_rfsimulator_ntn_geo/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_rfsimulator_ntn_leo/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
             - ../5g_rfsimulator/mysql-healthcheck.sh:/tmp/mysql-healthcheck.sh
@@ -25,7 +25,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -37,7 +37,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -49,7 +49,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -72,7 +72,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\
               "ip route add 12.1.1.0/24 via 192.168.72.134 dev eth0; sleep infinity"

ci-scripts/yaml_files/5g_rfsimulator_u0_25prb/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris
@@ -74,7 +74,7 @@ services:
     oai-ext-dn:
         privileged: true
         container_name: rfsim5g-oai-ext-dn
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         init: true
         entrypoint: /bin/bash -c \
               "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;"\

ci-scripts/yaml_files/5g_vrtsim_chanmod/docker-compose.yaml

@@ -3,7 +3,7 @@
 services:
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -26,7 +26,7 @@ services:
                 ipv4_address: 192.168.71.131
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -38,7 +38,7 @@ services:
                 ipv4_address: 192.168.71.132
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -50,7 +50,7 @@ services:
                 ipv4_address: 192.168.71.133
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris

ci-scripts/yaml_files/5g_vrtsim_cirdb/docker-compose.yaml

@@ -12,7 +12,7 @@ services:
 
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -36,7 +36,7 @@ services:
 
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -49,7 +49,7 @@ services:
 
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -62,7 +62,7 @@ services:
 
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris

ci-scripts/yaml_files/5g_vrtsim_multiue/docker-compose.yaml

@@ -12,7 +12,7 @@ services:
 
     mysql:
         container_name: "rfsim5g-mysql"
-        image: mysql:8.0
+        image: mysql:9.6
         init: true
         volumes:
             - ../5g_rfsimulator/oai_db.sql:/docker-entrypoint-initdb.d/oai_db.sql
@@ -36,7 +36,7 @@ services:
 
     oai-amf:
         container_name: "rfsim5g-oai-amf"
-        image: oaisoftwarealliance/oai-amf:v2.1.10
+        image: oaisoftwarealliance/oai-amf:v2.2.1
         environment:
             - TZ=Europe/paris
         volumes:
@@ -49,7 +49,7 @@ services:
 
     oai-smf:
         container_name: "rfsim5g-oai-smf"
-        image: oaisoftwarealliance/oai-smf:v2.1.10
+        image: oaisoftwarealliance/oai-smf:v2.2.1
         environment:
             - TZ=Europe/Paris
         volumes:
@@ -62,7 +62,7 @@ services:
 
     oai-upf:
         container_name: "rfsim5g-oai-upf"
-        image: oaisoftwarealliance/oai-upf:v2.1.10
+        image: oaisoftwarealliance/oai-upf:v2.2.1
         init: true
         environment:
             - TZ=Europe/Paris

ci-scripts/yaml_files/fr1_epc_20897/docker-compose.yml

@@ -184,7 +184,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: prod-trf-gen
         networks:

ci-scripts/yaml_files/magma_lte_20892/docker-compose.yml

@@ -168,7 +168,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: prod-trf-gen
         networks:

ci-scripts/yaml_files/magma_nsa_20897/docker-compose.yml

@@ -168,7 +168,7 @@ services:
             retries: 5
 
     trf_gen:
-        image: oaisoftwarealliance/trf-gen-cn5g:focal
+        image: oaisoftwarealliance/trf-gen-cn5g:latest
         privileged: true
         container_name: prod-trf-gen
         networks:

ci-scripts/yaml_files/sa_gnb_aerial/aerial_l1_entrypoint.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+# SPDX-License-Identifier: MIT
+
+# Check if cuBB_SDK is defined, if not, use default path
+cuBB_Path="${cuBB_SDK:-/opt/nvidia/cuBB}"
+
+cd "$cuBB_Path" || exit 1
+
+# Restart MPS
+# Export variables
+export CUDA_DEVICE_MAX_CONNECTIONS=8
+export CUDA_MPS_PIPE_DIRECTORY=/var
+export CUDA_MPS_LOG_DIRECTORY=/var
+
+# Stop existing MPS
+echo quit | sudo -E nvidia-cuda-mps-control
+
+# Start MPS
+sudo -E nvidia-cuda-mps-control -d
+sudo -E echo start_server -uid 0 | sudo -E nvidia-cuda-mps-control
+
+# Start cuphycontroller_scf
+# Check if an argument is provided
+if [ $# -eq 0 ]; then
+    # No argument provided, use default value
+    argument="P5G_WNC_GH"
+else
+    # Argument provided, use it
+    argument="$1"
+fi
+
+sudo -E "$cuBB_Path"/build.$(uname -m)/cuPHY-CP/cuphycontroller/examples/cuphycontroller_scf "$argument"
+sudo -E ./build.$(uname -m)/cuPHY-CP/gt_common_libs/nvIPC/tests/pcap/pcap_collect

ci-scripts/yaml_files/sa_gnb_aerial/cuphycontroller_P5G_WNC_GH.yaml

@@ -0,0 +1,243 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+aerial_sdk_version: 25-3-cubb
+l2adapter_filename: l2_adapter_config_P5G_GH.yaml
+aerial_metrics_backend_address: 127.0.0.1:8081
+
+# CPU core shared by all low-priority threads
+low_priority_core: 10
+enable_ptp_svc_monitoring: 0
+ptp_rms_threshold: 20 #ns
+nic_tput_alert_threshold_mbps: 85000
+
+cuphydriver_config:
+  standalone: 0
+  validation: 0
+  num_slots: 8
+  log_level: DBG
+  profiler_sec: 0
+  dpdk_thread: 10
+  dpdk_verbose_logs: 0
+  accu_tx_sched_res_ns: 500
+  accu_tx_sched_disable: 0 #Flag applicable only for CX6-DX : BF3/CX7 HW and beyond support accurate send scheduling directly on timestamp, for CX6-DX this is implemented via software emulation
+  fh_stats_dump_cpu_core: -1
+  pdump_client_thread: -1
+  use_green_contexts: 0
+  use_batched_memcpy: 0 # Experimental feature; requires >= CUDA 12.8
+  mps_sm_pusch: 100
+  mps_sm_pucch: 2
+  mps_sm_prach: 2
+  mps_sm_ul_order: 20
+  mps_sm_pdsch: 102
+  mps_sm_pdcch: 10
+  mps_sm_pbch: 2
+  mps_sm_gpu_comms: 16
+  mps_sm_srs: 16
+  pdsch_fallback: 0
+  dpdk_file_prefix: cuphycontroller
+  nics:
+    - nic: '0000:01:00.0'
+      mtu: 9216
+      cpu_mbufs: 196608
+      uplane_tx_handles: 64
+      txq_size: 8192
+      rxq_size: 16384
+      gpu: 0
+  cus_port_failover: 0
+  gpus:
+    - 0
+    # Set GPUID to the GPU sharing the PCIe switch as NIC
+    # run nvidia-smi topo -m to find out which GPU
+  workers_ul: [4,5]
+  workers_dl: [6,7,8]
+  debug_worker: -1
+  workers_sched_priority: 95
+  prometheus_thread: -1
+  start_section_id_srs: 3072
+  start_section_id_prach: 2048
+  enable_ul_cuphy_graphs: 1
+  enable_dl_cuphy_graphs: 1
+  ul_order_kernel_mode: 0 # 0: Ping-Pong, 1: dual CTA
+  ul_order_timeout_cpu_ns: 8000000
+  ul_order_timeout_log_interval_ns: 1000000000
+  ul_order_timeout_gpu_ns: 3000000
+  ul_order_timeout_gpu_srs_ns: 5200000
+  ul_srs_aggr3_task_launch_offset_ns: 500000
+  ul_order_timeout_gpu_log_enable: 0
+  ul_order_max_rx_pkts: 512
+  ul_order_rx_pkts_timeout_ns: 100000
+  cplane_disable: 0
+  gpu_init_comms_dl: 1
+  cell_group: 1
+  cell_group_num: 1
+  fix_beta_dl: 0
+  bfw_beta_prescaler: 16384
+  pusch_workCancelMode: 2  # set cuphyPuschStatPrms_t workCancelMode field to PUSCH_DEVICE_GRAPHS; this only sets the mode and does not cancel work;
+                           # work cancellation (i.e., not launching some of the device graphs) can only occur after an explicit internal
+                           # memory write is timely observed by a PUSCH graph.
+  pusch_sinr: 2
+  pusch_rssi: 1
+  pusch_tdi: 1
+  pusch_cfo: 1
+  pusch_dftsofdm: 0
+  pusch_to: 1
+  pusch_select_eqcoeffalgo: 3
+  pusch_select_chestalgo: 1
+  pusch_enable_perprgchest: 0
+  pusch_tbsizecheck: 1
+  pusch_deviceGraphLaunchEn: 1
+  pusch_waitTimeOutPreEarlyHarqUs: 3000
+  pusch_waitTimeOutPostEarlyHarqUs: 3000
+  puxch_polarDcdrListSz: 8
+  enable_cpu_task_tracing: 0
+  enable_prepare_tracing: 0
+  disable_empw: 0 #1=>Disables Multi packet WQE feature
+  cqe_tracer_config:
+    enable_dl_cqe_tracing: 0
+    cqe_trace_cell_mask: 1 #[64 bit mask: Bit0->Cell0, Bit1->Cell1...]
+    cqe_trace_slot_mask: 196800 #[20 bit mask: Bit0->Slot0, Bit1->Slot1...] 196800=>All *6,*7 DL Slots
+  ul_rx_pkt_tracing_level: 0
+  ul_rx_pkt_tracing_level_srs: 0
+  pmu_metrics: 0 #Enable and select PMU metrics, 0=disabled, 1=General Counters (platform agnostic), 2=Topdown Metrics (Grace only), 3=Cache Metrics (Grace only)
+  enable_h2d_copy_thread: 1
+  h2d_copy_thread_cpu_affinity : 11
+  h2d_copy_thread_sched_priority : 95 #0->SCHED_OTHER, >0->Actual
+  split_ul_cuda_streams: 0 # 1=Put UL slot 4 and slot 5 on different streams for DDDSUUDDDD pattern
+  serialize_pucch_pusch: 0 # 1=Force serialization of PUSCH/PUCCH
+                           # Note: for Early Harq (EH) order is PUSCH EH -> PUCCH -> PUSCH non EH
+                           #       for non-Early Harq order is PUCCH -> all PUSCH processing
+  aggr_obj_non_avail_th: 5 # Threshold for consecutive non-availability of Aggregated objects(UL/DL) or DL/UL buffers
+  dl_wait_th_ns:
+    - 500000  #H2D copy wait threshold
+    - 4000000 #cuPHY DL channel wait threshold
+  sendCPlane_timing_error_th_ns : 0
+  sendCPlane_ulbfw_backoff_th_ns: 300000    # ULBFW must be completed by cplane send time - this is the backoff time
+  sendCPlane_dlbfw_backoff_th_ns: 300000    # DLBFW must be completed by cplane send time - this is the backoff time
+  pusch_forcedNumCsi2Bits: 0
+  mMIMO_enable: 0
+  enable_srs: 1
+  ue_mode: 0
+  mCh_segment_proc_enable: 0
+  pusch_aggr_per_ctx: 3
+  prach_aggr_per_ctx: 2
+  pucch_aggr_per_ctx: 4
+  srs_aggr_per_ctx: 3
+  ul_input_buffer_per_cell: 10
+  ul_input_buffer_per_cell_srs: 6
+  max_harq_pools: 384
+  max_harq_tx_count_bundled: 10
+  max_harq_tx_count_non_bundled: 4
+  ok_testbench_config:
+    enable_ok_tb: 0
+    num_ok_tb_slot: 0 #Presently not used
+  max_ru_unhealthy_ul_slots: 100
+  srs_chest_algo_type: 0
+  srs_chest_tol2_normalization_algo_type: 1
+  srs_chest_tol2_constant_scaler: 32768.0
+  bfw_power_normalization_alg_selector: 1
+  total_num_srs_chest_buffers: 6144
+  send_static_bfw_wt_all_cplane: 1
+  ul_pcap_capture_enable: 0
+  ul_pcap_capture_thread_cpu_affinity: 10
+  ul_pcap_capture_thread_sched_priority: 95
+  pcap_logger_ul_cplane_enable: 0
+  pcap_logger_dl_cplane_enable: 0
+  pcap_logger_thread_cpu_affinity: 10
+  pcap_logger_thread_sched_prio: 95
+  pcap_logger_file_save_dir: ./
+  dlc_bfw_enable_divide_per_cell: 0 # Enable/disable dividing DL BFW C-Plane transmission window among multiple cells in a slot
+  ulc_bfw_enable_divide_per_cell: 0 # Enable/disable dividing UL BFW C-Plane transmission window among multiple cells in a slot
+  dlc_alloc_cplane_bfw_txq: 0 # Allocates a second separate queue for BFW DL C-Plane transmission
+  ulc_alloc_cplane_bfw_txq: 1 # Allocates a second separate queue for BFW UL C-Plane transmission
+  #static beam id range
+  static_beam_id_start: 1
+  static_beam_id_end: 16527
+  #dynamic beam id range
+  dynamic_beam_id_start: 16528 #Dynamic beam ID start should be after static beam ID end
+  dynamic_beam_id_end: 32767 #15bit max value
+  bfw_c_plane_chaining_mode: 0 # 0: Default memcpy of BFW weights, 1: CPU mbuf chaining of BFW weights, 2: GPU mbuf chaining
+  enable_l1_param_sanity_check: 0
+  pusch_nMaxLdpcHetConfigs: 32
+  notify_ul_harq_buffer_release: 0
+
+  # data_config:
+    # datalake_core: 12           # This must be set for Data Lake and/or E3 Agent to be used
+    # datalake_db_write_enable: 1   # Enable/disable ClickHouse writes based on datalake_data_types
+    # datalake_samples: 1000000
+    # datalake_address: localhost
+    # datalake_engine: "MergeTree() PRIMARY KEY (TsTaiNs)"
+    # # datalake_drop_tables: 0   # Set to 1 to drop Clickhouse tables at startup
+    # datalake_data_types: [fh, pusch, hest]  # Data types to write to ClickHouse DB (all types always collected in memory for E3 Agent):
+                                            # fh = Fronthaul IQ samples,pusch = PUSCH/FAPI data, hest = channel estimates
+    # datalake_store_failed_pdu: 0      # Set to 1 to store PDU data even when CRC fails
+    # e3_agent_enable: 0          # Enable/disable E3 Agent and dApp capabilities
+    # num_rows_fh: 120
+    # num_rows_pusch: 200
+    # num_rows_hest: 140
+    # e3_pub_port: 5555           # E3 publisher port for indication messages
+    # e3_rep_port: 5556           # E3 reply port for E3AP requests
+    # e3_sub_port: 5560           # E3 subscriber port for Manager messages
+
+  cells:
+    - name: O-RU 0
+      cell_id: 1
+      ru_type: 1
+      # set to 00:00:00:00:00:00 to use the MAC address of the NIC port to use
+      src_mac_addr: 00:00:00:00:00:00
+      dst_mac_addr: e8:c7:cf:ad:12:0b #WNC n78
+      nic: '0000:01:00.0'
+      vlan: 500
+      pcp: 7
+      txq_count_uplane: 1
+      eAxC_id_ssb_pbch: [0, 1, 2, 3]
+      eAxC_id_pdcch: [0, 1, 2, 3]
+      eAxC_id_pdsch: [0, 1, 2, 3]
+      eAxC_id_csirs: [0, 1, 2, 3]
+      eAxC_id_pusch: [0, 1, 2, 3]
+      eAxC_id_pucch: [0, 1, 2, 3]
+      eAxC_id_srs: [8, 9, 10, 11]
+      eAxC_id_prach: [4, 5, 6, 7]
+      dl_iq_data_fmt: {comp_meth: 1, bit_width: 9}
+      ul_iq_data_fmt: {comp_meth: 1, bit_width: 9}
+      section_3_time_offset: 484
+      fs_offset_dl: 7
+      exponent_dl: 4
+      ref_dl: 0
+      fs_offset_ul: -5
+      exponent_ul: 4
+      max_amp_ul: 65504
+      mu: 1
+      T1a_max_up_ns: 280000
+      T1a_max_cp_ul_ns: 405000
+      Ta4_min_ns: 50000
+      Ta4_max_ns: 331000
+      Tcp_adv_dl_ns: 125000
+      ul_u_plane_tx_offset_ns: 280000
+      fh_len_range: 0
+      pusch_prb_stride: 273
+      prach_prb_stride: 12
+      srs_prb_stride: 273
+      pusch_ldpc_max_num_itr_algo_type: 1
+      pusch_fixed_max_num_ldpc_itrs: 10
+      pusch_ldpc_early_termination: 0
+      pusch_ldpc_algo_index: 0
+      pusch_ldpc_flags: 2
+      pusch_ldpc_use_half: 1
+      pusch_nMaxPrb: 273
+      pusch_nMaxRx: 4
+      ul_gain_calibration: 78.68
+      lower_guard_bw: 845
+      tv_pusch: cuPhyChEstCoeffs.h5

ci-scripts/yaml_files/sa_gnb_aerial/docker-compose.yaml

@@ -17,31 +17,30 @@ services:
     stdin_open: true
     tty: true
     volumes:
-      - ~/aerial-cuda-accelerated-ran:/opt/nvidia/cuBB/
       - /lib/modules:/lib/modules
       - /dev/hugepages:/dev/hugepages
       - /usr/src:/usr/src
+      - ./cuphycontroller_P5G_WNC_GH.yaml:/opt/nvidia/cuBB/cuPHY-CP/cuphycontroller/config/cuphycontroller_P5G_WNC_GH.yaml
+      - ./aerial_l1_entrypoint.sh:/opt/nvidia/cuBB/aerial_l1_entrypoint.sh
       - /var/log/aerial:/var/log/aerial
       - ../../../cmake_targets/share:/opt/cuBB/share
     userns_mode: host
     ipc: "shareable"
-    image: ${REGISTRY-nvcr.io/nvidia/aerial/}${L1_IMG:-aerial-cuda-accelerated-ran}:${TAG:-26-1-cubb}
+    image: cubb-build:25-3
     environment:
       - cuBB_SDK=/opt/nvidia/cuBB
-      - AERIAL_LOG_PATH=/var/log/aerial
-    command: bash -c "sudo rm -rf /tmp/phy.log && /opt/nvidia/cuBB/run_l1.sh"  #Default is P5G_WNC_GH
-    #command: bash -c "sudo rm -rf /tmp/phy.log && /opt/nvidia/cuBB/run_l1.sh P5G_FXN_GH"  #For FXN
+    command: bash -c "sudo rm -rf /tmp/phy.log && sudo chmod +x /opt/nvidia/cuBB/aerial_l1_entrypoint.sh && /opt/nvidia/cuBB/aerial_l1_entrypoint.sh"
     healthcheck:
       test: ["CMD-SHELL",'grep -q "L1 is ready!" /tmp/phy.log && echo 0 || echo 1']
       interval: 20s
       timeout: 5s
       retries: 5
   oai-gnb-aerial:
-    cpuset: "13-17"
-    image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb-aerial}:${TAG:-latest}
+    cpuset: "13-16"
+    image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb-aerial}:${TAG:-develop}
     depends_on:
       nv-cubb:
-        condition: service_started
+        condition: service_healthy
     cap_drop:
       - ALL
     cap_add:
@@ -63,7 +62,7 @@ services:
     stdin_open: true
     tty: true
     volumes:
-      - ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-vnf.sa.band78.273prb.aerial.conf:/opt/oai-gnb/etc/gnb.conf
+      - ../../conf_files/gnb-vnf.sa.band78.273prb.aerial.conf:/opt/oai-gnb/etc/gnb.conf
     container_name: oai-gnb-aerial
     healthcheck:
       test: /bin/bash -c "ps aux | grep -v grep | grep -c softmodem"

ci-scripts/yaml_files/sa_gnb_aerial_multicell/docker-compose.yaml

@@ -1,110 +0,0 @@
-services:
-  nv-cubb:
-    container_name: nv-cubb
-    deploy:
-      resources:
-        reservations:
-          devices:
-            - driver: nvidia
-              count: all
-              capabilities:
-                - gpu
-    network_mode: host
-    shm_size: 4096m
-    privileged: true
-    stdin_open: true
-    tty: true
-    volumes:
-      - ~/aerial-cuda-accelerated-ran:/opt/nvidia/cuBB/
-      - /lib/modules:/lib/modules
-      - /dev/hugepages:/dev/hugepages
-      - /usr/src:/usr/src
-      - /var/log/aerial:/var/log/aerial
-      - ../../../cmake_targets/share:/opt/cuBB/share
-    userns_mode: host
-    ipc: "shareable"
-    image: ${REGISTRY-nvcr.io/nvidia/aerial/}${L1_IMG:-aerial-cuda-accelerated-ran}:${TAG:-26-1-cubb}
-    environment:
-      - cuBB_SDK=/opt/nvidia/cuBB
-      - AERIAL_LOG_PATH=/var/log/aerial
-    command: bash -c "sudo rm -rf /tmp/phy.log && /opt/nvidia/cuBB/run_l1.sh"
-    healthcheck:
-      test: ["CMD-SHELL",'grep -q "L1 is ready!" /tmp/phy.log && echo 0 || echo 1']
-      interval: 20s
-      timeout: 5s
-      retries: 5
-  oai-gnb-aerial-20:
-    cpuset: "13-18"
-    image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb-aerial}:${TAG:-develop}
-    depends_on:
-      nv-cubb:
-        condition: service_healthy
-    cap_drop:
-      - ALL
-    cap_add:
-      - SYS_NICE
-      - IPC_LOCK
-    ipc: "container:nv-cubb"
-    environment:
-      USE_ADDITIONAL_OPTIONS: --log_config.global_log_options level,nocolor,utc_time
-    deploy:
-      resources:
-        reservations:
-          devices:
-            - driver: nvidia
-              count: all
-              capabilities:
-                - gpu
-    networks:
-       oai-cn5g-public-net:
-            ipv4_address: 192.168.70.140
-    shm_size: 4096m
-    stdin_open: true
-    tty: true
-    volumes:
-      - ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-vnf.sa.band78.273prb.aerial.20.conf:/opt/oai-gnb/etc/gnb.conf
-    container_name: oai-gnb-aerial-20
-    healthcheck:
-      test: /bin/bash -c "ps aux | grep -v grep | grep -c softmodem"
-      interval: 10s
-      timeout: 5s
-      retries: 5
-  oai-gnb-aerial-21:
-    cpuset: "19-24"
-    image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb-aerial}:${TAG:-develop}
-    depends_on:
-      oai-gnb-aerial-20:
-        condition: service_healthy
-    cap_drop:
-      - ALL
-    cap_add:
-      - SYS_NICE
-      - IPC_LOCK
-    ipc: "container:nv-cubb"
-    environment:
-      USE_ADDITIONAL_OPTIONS: --log_config.global_log_options level,nocolor,utc_time
-    deploy:
-      resources:
-        reservations:
-          devices:
-            - driver: nvidia
-              count: all
-              capabilities:
-                - gpu
-    networks:
-       oai-cn5g-public-net:
-            ipv4_address: 192.168.70.141
-    shm_size: 4096m
-    stdin_open: true
-    tty: true
-    volumes:
-      - ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-vnf.sa.band78.273prb.aerial.21.conf:/opt/oai-gnb/etc/gnb.conf
-    container_name: oai-gnb-aerial-21
-    healthcheck:
-      test: /bin/bash -c "ps aux | grep -v grep | grep -c softmodem"
-      interval: 10s
-      timeout: 5s
-      retries: 5
-networks:
-    oai-cn5g-public-net:
-      external: true

cmake_targets/build_oai

@@ -4,8 +4,6 @@
 # file build_oai
 # brief OAI automated build tool that can be used to install, compile, run OAI.
 
-set -e
-
 # Include helper functions
 THIS_SCRIPT_PATH=$(dirname $(readlink -f "$0"))
 source "$THIS_SCRIPT_PATH"/tools/build_helper
@@ -132,16 +130,9 @@ function main() {
        --build-tool-opt)
             BUILD_TOOL_OPT+=" $2"
             shift 2;;
-       -c | --clean)
+       -c | --clean | -C | --clean-all)
             CLEAN=1
             shift;;
-       -C | --clean-all)
-            CLEAN_ALL=1
-            shift;;
-       --clean-kernel)
-            clean_kernel
-            echo_info "Erased iptables config and removed modules from kernel"
-            shift;;
        --cmake-opt)
             CMAKE_CMD="$CMAKE_CMD $2"
             shift 2;;
@@ -330,8 +321,8 @@ function main() {
               echo_info "Enabling build of all optional shared libraries ($OPTIONAL_LIBRARIES)" 
             else
               for reqlib in $2; do
-                lib=$(echo $OPTIONAL_LIBRARIES | tr ' ' '\n' | grep -w $reqlib) # search given parameter in list
-                [[ $? -ne 0 ]] && echo_fatal "Unknown optional library in $reqlib, valid libraries are $OPTIONAL_LIBRARIES"
+                lib=$(echo $OPTIONAL_LIBRARIES | tr ' ' '\n' | grep -w -- $reqlib) # search given parameter in list
+                [[ $? -ne 0 ]] && echo_fatal "Unknown optional library \"$reqlib\", valid libraries are: $OPTIONAL_LIBRARIES"
                 TARGET_LIST="$TARGET_LIST $lib" # will append the found library
                 CMAKE_CMD="$CMAKE_CMD -DENABLE_${lib^^}=ON"
                 echo_info "Enabling build of optional shared library $lib"
@@ -384,13 +375,8 @@ function main() {
 
   echo "OPENAIR_DIR    = $OPENAIR_DIR"
 
-  if [ "$CLEAN_ALL" = "1" ] ; then
-    clean_all_files
-    echo "Erased all previously producted files"
-  fi
-
-  dlog=$OPENAIR_DIR/cmake_targets/log
-  mkdir -p $dlog
+  DIR=$OPENAIR_DIR/cmake_targets
+  [ "$CLEAN" = "1" ] && rm -rf "$DIR/$BUILD_DIR"
 
   if [ "$INSTALL_EXTERNAL" = "1" ] ; then
     echo_info "Installing packages"
@@ -423,10 +409,6 @@ function main() {
     check_install_additional_tools
   fi
 
-  DIR=$OPENAIR_DIR/cmake_targets
-
-  [ "$CLEAN" = "1" ] && rm -rf $DIR/$BUILD_DIR/build
-
   if [[ $TARGET_LIST != "" ]] && [[ -f $OPENAIR_DIR/CMakeLists.txt ]]; then
     # add some default libraries that should always be built
     # for eNB, gNB, UEs, simulators
@@ -441,11 +423,10 @@ function main() {
     # e.g., cmake_targets/ran_build/build, hence the ../../..
     CMAKE_CMD="$CMAKE_CMD ../../.."
     echo_info "Running \"$CMAKE_CMD\""
-    eval $CMAKE_CMD
+    eval $CMAKE_CMD || echo_fatal "cmake configuration failed"
     cmd="$CMAKE --build . --target ${TARGET_LIST} -- ${BUILD_TOOL_OPT}"
     echo_info "Running \"${cmd}\"" $green
-    eval $cmd
-    ret=$?
+    eval $cmd || echo_fatal "build failed"
 
     if [ "$UE" = 1 ] ; then
       echo_info "Generate LTE USIM default sim content UE specific part"

cmake_targets/macros.cmake

@@ -83,7 +83,7 @@ function(run_asn1c ASN1C_GRAMMAR ASN1C_PREFIX)
   get_filename_component(GRAMMAR_FILE ${ASN1C_GRAMMAR} NAME)
   set(LOGFILE "${CMAKE_CURRENT_BINARY_DIR}/${GRAMMAR_FILE}.log")
   add_custom_command(OUTPUT ${ASN1C_OUTPUT}
-    COMMAND ASN1C_PREFIX=${ASN1C_PREFIX} ${ASN1C_EXEC} ${ASN1C_OPTIONS} -D ${CMAKE_CURRENT_BINARY_DIR} ${ASN1C_GRAMMAR} > ${LOGFILE} 2>&1 || cat ${LOGFILE}
+    COMMAND ASN1C_PREFIX=${ASN1C_PREFIX} ${ASN1C_EXEC} ${ASN1C_OPTIONS} -D ${CMAKE_CURRENT_BINARY_DIR} ${ASN1C_GRAMMAR} > ${LOGFILE} 2>&1 || ( cat ${LOGFILE} && false )
     DEPENDS ${ASN1C_GRAMMAR}
     COMMENT "Generating ${ASN1C_COMMENT} from ${GRAMMAR_FILE}"
   )

cmake_targets/tools/build_helper

@@ -120,32 +120,6 @@ handler_EXIT() {
 
 trap handler_EXIT EXIT
 
-###########################
-# Cleaners
-###########################
-
-clean_kernel() {
-    $SUDO modprobe ip_tables
-    $SUDO modprobe x_tables
-    $SUDO iptables -P INPUT ACCEPT
-    $SUDO iptables -F INPUT
-    $SUDO iptables -P OUTPUT ACCEPT
-    $SUDO iptables -F OUTPUT
-    $SUDO iptables -P FORWARD ACCEPT
-    $SUDO iptables -F FORWARD
-    $SUDO iptables -t nat -F
-    $SUDO iptables -t mangle -F
-    $SUDO iptables -t filter -F
-    $SUDO iptables -t raw -F
-    echo_info "Flushed iptables"
-}
-
-clean_all_files() {
- set_openair_env
- dir=$OPENAIR_DIR/cmake_targets
- rm -rf $dir/ran_build $dir/ran_build_noLOG
-}
-
 ############################################
 # External packages installers
 ############################################

common/config/config_common.c

@@ -133,7 +133,7 @@ int config_setdefault_int64(configmodule_interface_t *cfg, paramdef_t *cfgoption
   return status;
 }
 
-int config_setdefault_intlist(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix)
+int config_setdefault_intlist(configmodule_interface_t *cfg, paramdef_t *cfgoptions)
 {
   int status = 0;
 
@@ -193,7 +193,7 @@ int config_setdefault_stringlist(configmodule_interface_t *cfg, paramdef_t *cfgo
   return status;
 }
 
-int config_setdefault_double(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix)
+int config_setdefault_double(configmodule_interface_t *cfg, paramdef_t *cfgoptions)
 {
   int status = 0;
   config_check_valptr(cfg, cfgoptions, sizeof(*cfgoptions->dblptr), 1);
@@ -229,7 +229,7 @@ int config_assign_ipv4addr(configmodule_interface_t *cfg, paramdef_t *cfgoptions
   return 0;
 }
 
-int config_setdefault_ipv4addr(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix)
+int config_setdefault_ipv4addr(configmodule_interface_t *cfg, paramdef_t *cfgoptions)
 {
   int status = 0;
 
@@ -333,13 +333,13 @@ int config_common_getdefault(configmodule_interface_t *cfg, paramdef_t *cfgoptio
 
     case TYPE_UINTARRAY:
     case TYPE_INTARRAY:
-      return config_setdefault_intlist(cfg, cfgoption, prefix);
+      return config_setdefault_intlist(cfg, cfgoption);
 
     case TYPE_DOUBLE:
-      return config_setdefault_double(cfg, cfgoption, prefix);
+      return config_setdefault_double(cfg, cfgoption);
 
     case TYPE_IPV4ADDR:
-      return config_setdefault_ipv4addr(cfg, cfgoption, prefix);
+      return config_setdefault_ipv4addr(cfg, cfgoption);
 
     case TYPE_LIST:
       // No default value for list type

common/config/config_common.h

@@ -20,11 +20,11 @@ void config_check_valptr(configmodule_interface_t *cfg, paramdef_t *cfgoptions,
 /* functions to set a parameter to its default value */
 int config_setdefault_int(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix);
 int config_setdefault_int64(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix);
-int config_setdefault_intlist(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix);
+int config_setdefault_intlist(configmodule_interface_t *cfg, paramdef_t *cfgoptions);
 int config_setdefault_string(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix);
 int config_setdefault_stringlist(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix);
-int config_setdefault_double(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix);
-int config_setdefault_ipv4addr(configmodule_interface_t *cfg, paramdef_t *cfgoptions, const char *prefix);
+int config_setdefault_double(configmodule_interface_t *cfg, paramdef_t *cfgoptions);
+int config_setdefault_ipv4addr(configmodule_interface_t *cfg, paramdef_t *cfgoptions);
 void *config_allocate_new(configmodule_interface_t *cfg, int sz, bool autoFree);
 void config_assign_int(configmodule_interface_t *cfg, paramdef_t *cfgoptions, char *fullname, int val);
 int config_common_getdefault(configmodule_interface_t *cfg, paramdef_t *cfgoption, const char *prefix);

common/config/config_load_configmodule.c

@@ -123,6 +123,10 @@ int config_cmdlineonly_getlist(configmodule_interface_t *cfg,
                                int numparams,
                                const char *prefix)
 {
+  UNUSED(cfg);
+  UNUSED(params);
+  UNUSED(numparams);
+  UNUSED(prefix);
   ParamList->numelt = 0;
   return 0;
 }
@@ -162,15 +166,15 @@ int config_cmdlineonly_get(configmodule_interface_t *cfg, paramdef_t *cfgoptions
 
       case TYPE_UINTARRAY:
       case TYPE_INTARRAY:
-        defval = config_setdefault_intlist(cfg, &cfgoptions[i], prefix);
+        defval = config_setdefault_intlist(cfg, &cfgoptions[i]);
         break;
 
       case TYPE_DOUBLE:
-        defval = config_setdefault_double(cfg, &cfgoptions[i], prefix);
+        defval = config_setdefault_double(cfg, &cfgoptions[i]);
         break;
 
       case TYPE_IPV4ADDR:
-        defval = config_setdefault_ipv4addr(cfg, &cfgoptions[i], prefix);
+        defval = config_setdefault_ipv4addr(cfg, &cfgoptions[i]);
         break;
 
       default:

common/config/config_paramdesc.h

@@ -48,8 +48,8 @@ typedef union checkedparam {
     int num_okintval;                                            /* number of valid values in the checkingval array */
   } s1a;
   struct {
-    int (*f2)(configmodule_interface_t *cfg,
-              paramdef_t *param); /* check an integer against an authorized range, defined by its min and max value */
+    int (*f2)(const configmodule_interface_t *cfg,
+              const paramdef_t *param); /* check an integer against an authorized range, defined by its min and max value */
     int okintrange[CONFIG_MAX_NUMCHECKVAL];  /* integer array, store  min and max values  */
 
   } s2;

common/config/config_userapi.c

@@ -177,19 +177,41 @@ void print_intvalueerror(paramdef_t *param, char *fname, int *okval, int numokva
 
 int config_check_intval(configmodule_interface_t *cfg, paramdef_t *param)
 {
+  UNUSED(cfg);
   if ( param == NULL ) {
     fprintf(stderr,"[CONFIG] config_check_intval: NULL param argument\n");
     return -1;
   }
 
-  for ( int i=0; i<param->chkPptr->s1.num_okintval ; i++) {
-    if( *(param->uptr) == param->chkPptr->s1.okintval[i] ) {
-      return 0;
+  if (param->type == TYPE_INT32 || param->type == TYPE_INT) {
+    if (param->iptr == NULL) {
+      fprintf(stderr, "[CONFIG] config_check_intval: %s: NULL iptr\n", param->optname);
+      return -1;
     }
+    const int v = *param->iptr;
+    for (int i = 0; i < param->chkPptr->s1.num_okintval; i++) {
+      if (v == param->chkPptr->s1.okintval[i])
+        return 0;
+    }
+    fprintf(stderr, "[CONFIG] config_check_intval: %s: %i invalid value, authorized values:\n       ", param->optname, v);
+    for (int i = 0; i < param->chkPptr->s1.num_okintval; i++) {
+      fprintf(stderr, " %i", param->chkPptr->s1.okintval[i]);
+    }
+    fprintf(stderr, " \n");
+    return -1;
+  } else {
+    if (param->uptr == NULL) {
+      fprintf(stderr, "[CONFIG] config_check_intval: %s: NULL uptr\n", param->optname);
+      return -1;
+    }
+    for (int i = 0; i < param->chkPptr->s1.num_okintval; i++) {
+      if (*(param->uptr) == (uint32_t)param->chkPptr->s1.okintval[i]) {
+        return 0;
+      }
+    }
+    print_intvalueerror(param, "config_check_intval", param->chkPptr->s1.okintval, param->chkPptr->s1.num_okintval);
+    return -1;
   }
-
-  print_intvalueerror(param,"config_check_intval", param->chkPptr->s1.okintval,param->chkPptr->s1.num_okintval);
-  return -1;
 }
 
 int config_check_modify_integer(configmodule_interface_t *cfg, paramdef_t *param)
@@ -210,14 +232,38 @@ int config_check_modify_integer(configmodule_interface_t *cfg, paramdef_t *param
   return -1;
 }
 
-int config_check_intrange(configmodule_interface_t *cfg, paramdef_t *param)
+int config_check_intrange(const configmodule_interface_t *cfg, const paramdef_t *param)
 {
+  UNUSED(cfg);
   if( *(param->iptr) >= param->chkPptr->s2.okintrange[0]  && *(param->iptr) <= param->chkPptr->s2.okintrange[1]  ) {
     return 0;
   }
 
-  fprintf(stderr,"[CONFIG] config_check_intrange: %s: %i invalid value, authorized range: %i %i\n",
-          param->optname, (int)*(param->uptr), param->chkPptr->s2.okintrange[0], param->chkPptr->s2.okintrange[1]);
+  fprintf(stderr,
+          "[CONFIG] config_check_intrange: %s: %i invalid value, authorized range: %i %i\n",
+          param->optname,
+          (int)*(param->iptr),
+          param->chkPptr->s2.okintrange[0],
+          param->chkPptr->s2.okintrange[1]);
+  return -1;
+}
+
+int config_check_uintrange(const configmodule_interface_t *cfg, const paramdef_t *param)
+{
+  (void)cfg;
+  const uint32_t *v = param->uptr;
+  const int *range = param->chkPptr->s2.okintrange;
+
+  if (*v >= (uint32_t)range[0] && *v <= (uint32_t)range[1]) {
+    return 0;
+  }
+
+  fprintf(stderr,
+          "[CONFIG] config_check_uintrange: %s: %u invalid, authorized range: %i %i\n",
+          param->optname,
+          *v,
+          range[0],
+          range[1]);
   return -1;
 }
 
@@ -234,6 +280,7 @@ void print_strvalueerror(paramdef_t *param, char *fname, char **okval, int numok
 
 int config_check_strval(configmodule_interface_t *cfg, paramdef_t *param)
 {
+  UNUSED(cfg);
   if ( param == NULL ) {
     fprintf(stderr,"[CONFIG] config_check_strval: NULL param argument\n");
     return -1;

common/config/config_userapi.h

@@ -51,7 +51,8 @@ int config_get_processedint(configmodule_interface_t *cfg, paramdef_t *cfgoption
 /* functions to be used in parameters definition, to check parameters values */
 int config_check_intval(configmodule_interface_t *cfg, paramdef_t *param);
 int config_check_modify_integer(configmodule_interface_t *cfg, paramdef_t *param);
-int config_check_intrange(configmodule_interface_t *cfg, paramdef_t *param);
+int config_check_intrange(const configmodule_interface_t *cfg, const paramdef_t *param);
+int config_check_uintrange(const configmodule_interface_t *cfg, const paramdef_t *param);
 int config_check_strval(configmodule_interface_t *cfg, paramdef_t *param);
 int config_checkstr_assign_integer(configmodule_interface_t *cfg, paramdef_t *param);
 const paramdef_t *config_get_paramdef_from_name(const paramdef_t *pd, int num, const char *name);

common/config/yaml/config_yaml.cpp

@@ -158,6 +158,7 @@ extern "C" int config_yaml_init(configmodule_interface_t *cfg)
 
 extern "C" void config_yaml_end(configmodule_interface_t *cfg)
 {
+  UNUSED(cfg);
   delete config_yaml::config;
 }
 

common/platform_constants.h

@@ -66,7 +66,6 @@
 #define RETURNok (0)
 #define RETURNerror (-1)
 #define DEFAULT_NAS_PATH "PWD"
-#define UNUSED_VARIABLE(vARIABLE) (void)(vARIABLE)
 #define NUM_PRACH_RX_FOR_NOISE_ESTIMATE 100
 
 // SDAP

common/platform_types.h

@@ -241,6 +241,9 @@ typedef struct protocol_ctxt_s {
   bool brOption;
 } protocol_ctxt_t;
 
+/// suppress compiler warning for unused arguments
+#define UNUSED(x) (void)x;
+
 #define UE_MODULE_ID_TO_INSTANCE(mODULE_iD) mODULE_iD + RC.nb_inst
 #define ENB_MODULE_ID_TO_INSTANCE(mODULE_iD) mODULE_iD
 #define UE_INSTANCE_TO_MODULE_ID(iNSTANCE) iNSTANCE - RC.nb_inst

common/utils/CMakeLists.txt

@@ -16,7 +16,7 @@ add_subdirectory(nr)
 add_subdirectory(LOG)
 add_subdirectory(threadPool)
 add_subdirectory(time_manager)
-add_library(utils utils.c system.c time_meas.c time_stat.c tuntap_if.c reverse_bits.c)
+add_library(utils utils.c system.c time_meas.c time_stat.c tuntap_if.c reverse_bits.c fsn.c)
 target_include_directories(utils PUBLIC .)
 target_link_libraries(utils PRIVATE ${T_LIB})
 add_subdirectory(barrier)

common/utils/LOG/log.c

@@ -519,13 +519,7 @@ void logTerm(void)
 }
 
 #include <sys/syscall.h>
-static inline int log_header(log_component_t *c,
-			     char *log_buffer,
-			     int buffsize,
-			     const char *file,
-			     const char *func,
-			     int line,
-			     int level)
+static inline int log_header(log_component_t *c, char *log_buffer, int buffsize, const char *func, int line, int level)
 {
   int flag = g_log->flag;
 
@@ -666,7 +660,7 @@ void log_dump(int component,
 
   if (wbuf != NULL) {
     va_start(args, format);
-    int pos=log_header(c, wbuf,MAX_LOG_TOTAL,"noFile","noFunc",0, OAILOG_INFO);
+    int pos = log_header(c, wbuf, MAX_LOG_TOTAL, "noFunc", 0, OAILOG_INFO);
     pos+=vsprintf(wbuf+pos,format, args);
     va_end(args);
 
@@ -875,6 +869,8 @@ void flush_mem_to_file(void)
 
 static void log_output_memory(log_component_t *c, const char *file, const char *func, int line, int comp, int level, const char* format,va_list args)
 {
+  UNUSED(comp);
+  UNUSED(file);
   //logRecord_mt(file,func,line, pthread_self(), comp, level, format, ##args)
   int len = 0;
   /* The main difference with the version above is the use of this local log_buffer.
@@ -887,7 +883,7 @@ static void log_output_memory(log_component_t *c, const char *file, const char *
 
   // make sure that for log trace the extra info is only printed once, reset when the level changes
   if (level < OAILOG_TRACE) {
-    int n = log_header(c, log_buffer+len, sizeof(log_buffer), file, func, line, level);
+    int n = log_header(c, log_buffer+len, sizeof(log_buffer), func, line, level);
     if (n > 0) {
       len += n;
       if (len > sizeof(log_buffer)) {

common/utils/T/DOC/T.md

@@ -14,6 +14,7 @@ It is made of two main parts:
 
 * [Basic usage](./T/basic.md)
 * [Record](./T/record.md)
+* [Record to ClickHouse](./T/record_db.md)
 * [Replay](./T/replay.md)
 * [Multiple tracers](./T/multi.md)
 * [MAC PDUs and wireshark](./T/wireshark.md)

common/utils/T/DOC/T/basic.md

@@ -67,18 +67,26 @@ the T tracer and only output on the terminal). The default is
 
 ## Run a tracer
 
-Go into the directory `common/utils/T/tracer` (or
-`cmake_targets/ran_build/build/common/utils/T/tracer`) and run for example the
+Go into the directory `common/utils/T/tracer` and run for example the
 `enb` tracer:
 
 ```shell
+#in common/utils/T/tracer directory
 ./enb -d ../T_messages.txt
 ```
 
+You can also run it from `cmake_targets/ran_build/build/` directory:
+
+```shell
+# in cmake_targets/ran_build/build directory
+./common/utils/T/tracer/enb -d ../../../common/utils/T/T_messages.txt
+```
+
 To trace a remote program, use the `-ip` option. For example,
 if you want to trace a program running on `192.168.12.148` do:
 
 ```shell
+# in common/utils/T/tracer directory
 ./enb -d ../T_messages.txt -ip 192.168.12.148
 ```
 

common/utils/T/DOC/T/record_db.md

@@ -0,0 +1,181 @@
+<!-- SPDX-License-Identifier: CC-BY-4.0 -->
+
+# Record to ClickHouse
+
+This document describes the database-backed T tracer. Unlike [`record`](./record.md), 
+which writes a `.raw` file, `record_db` writes T tracer events 
+directly into a [ClickHouse database](https://clickhouse.com/docs/intro).
+
+## What `record_db` does
+
+`record_db` connects to a running OAI softmodem instance through 
+the standard T tracer TCP interface and:
+
+- Enables the selected events
+- Creates one ClickHouse table per enabled event
+- Batches received rows and inserts them into ClickHouse
+
+Each table always contains:
+
+- `TsSwNs`: software receive timestamp created by `record_db`
+
+If an event has both `frame` and `slot` (or `subframe`) fields, the
+tool also adds:
+
+- `TsTxUtcNs`: transmission timestamp reconstructed from frame/slot
+
+The remaining columns come from the event definition in
+`T_messages.txt`.
+
+## Build
+
+`record_db` pulls external dependencies (`clickhouse-cpp` and `fmtlog`).
+Also make sure you have `libzstd-dev` version > 1.5.X.
+
+From the repository using build_oai:
+
+```shell
+cd cmake_targets
+./build_oai --gNB --nrUE --cmake-opt -DT_RECORD_DB=ON
+```
+
+Or, from an existing build directory using cmake:
+
+```shell
+cd cmake_targets/ran_build/build
+cmake -DT_RECORD_DB=ON .
+# use make or ninja
+make T_tools
+```
+
+The binary is then available in:
+
+```shell
+cmake_targets/ran_build/build/common/utils/T/tracer/record_db
+```
+
+**NOTE*: Unlike other docs on T Tracer for `record_db` we are building in cmake 
+directory rather than in the directory of T.
+
+## Prerequisites
+
+- a running ClickHouse server reachable from `record_db`
+- an OAI softmodem started with T tracer enabled, typically with `--T_stdout 2`
+- the tracer message description file, usually `common/utils/T/T_messages.txt`
+
+By default `record_db` connects to:
+
+- T tracer endpoint: `127.0.0.1:2021`
+- ClickHouse native endpoint: `localhost:9000`
+- ClickHouse database: `oai`
+
+## Start the softmodem
+
+Start the gNB or UE with T tracer enabled as described in
+[basic usage](./basic.md). For example:
+
+```shell
+cd cmake_targets/ran_build/build
+sudo ./nr-softmodem -O <config-file> --T_stdout 2 --T_nowait
+```
+
+Use `--T_port <port>` on the softmodem side if you want a port other
+than `2021`, and pass the same value to `record_db` with `-p`.
+
+## Basic example
+
+To enable all events except the most verbose groups and write them to
+ClickHouse:
+
+```shell
+cd cmake_targets/ran_build/build/
+./common/utils/T/tracer/record_db -d ../../../common/utils/T/T_messages.txt \
+  -ON \
+  -off VCD \
+  -off HEAVY \
+  -off LEGACY_GROUP_TRACE \
+  -off LEGACY_GROUP_DEBUG
+```
+
+To stop recording, press `Ctrl-C`. The tool flushes pending buffered
+rows before exiting.
+
+## Select specific events
+
+The event selection rules are the same as for [`record`](./record.md):
+
+- `-ON` enables all events
+- `-OFF` disables all events
+- `-on <GROUP or ID>` enables one group or one event
+- `-off <GROUP or ID>` disables one group or one event
+
+These options are processed in order. For example:
+
+```shell
+./common/utils/T/tracer/record_db -d ../../../common/utils/T/T_messages.txt -OFF -on GNB_PHY_UL_FD_PUSCH_IQ -on GNB_PHY_UL_PAYLOAD_RX_BITS
+```
+
+This starts from everything disabled and enables only the two listed
+events.
+
+## ClickHouse options
+
+`record_db` accepts the following database-related options:
+
+```shell
+-ch-host <host>      ClickHouse host, default `localhost`
+-ch-port <port>      ClickHouse native port, default `9000`
+-ch-db <database>    database name, default `oai`
+-ch-user <user>      optional ClickHouse user
+-ch-pass <password>  optional ClickHouse password
+-ch-droptables       drop the target database before starting
+-debug               enable debug logging
+```
+
+Example using a remote ClickHouse instance:
+
+```shell
+./record_db -d ../T_messages.txt \
+  -ON -off HEAVY \
+  -ip 192.168.1.10 -p 2021 \
+  -ch-host 192.168.1.20 -ch-port 9000 -ch-db oai_traces
+```
+
+## Inspect the data
+
+Once `record_db` is running, connect to ClickHouse and inspect the
+generated tables:
+
+```shell
+clickhouse-client --host localhost --port 9000 --query "SHOW TABLES FROM oai"
+```
+
+Count rows in one event table:
+
+```shell
+clickhouse-client --host localhost --port 9000 --query "SELECT count(*) FROM oai.GNB_PHY_UL_FD_PUSCH_IQ"
+```
+
+Inspect the latest samples:
+
+```shell
+clickhouse-client --host localhost --port 9000 --query "SELECT * FROM oai.GNB_PHY_UL_FD_PUSCH_IQ ORDER BY TsSwNs DESC LIMIT 5"
+```
+
+## Important behavior
+
+- Tables are created only for enabled events.
+- Table names match the event names from `T_messages.txt`.
+- The current implementation creates tables with ClickHouse
+  `ENGINE = Memory()`.
+- Because of that engine choice, recorded data remains available while
+  ClickHouse is running, but is not persistent across a ClickHouse
+  restart.
+- If `-ch-droptables` is used, the whole target database is dropped and
+  recreated before capture starts.
+
+## Get the full option list
+
+```shell
+./record_db -h
+```

common/utils/T/T.c

@@ -89,6 +89,7 @@ static int get_message(int s)
 
 static void *T_receive_thread(void *_)
 {
+  UNUSED(_);
   int err = 0;
   while (!err) err = get_message(T_socket);
 

common/utils/T/check_vcd.c

@@ -27,6 +27,10 @@
  */
 void exit_function(const char *file, const char *function, const int line, const char *s, const int assert)
 {
+  UNUSED(file);
+  UNUSED(function);
+  UNUSED(line);
+  UNUSED(s);
   if (assert) {
     abort();
   } else {

common/utils/T/tracer/enb.c

@@ -428,7 +428,7 @@ static void enb_main_gui(enb_gui *e, gui *g, event_handler *h, void *database,
   for (i = 0; i < 8; i++)
     timeline_set_subline_background_color(g, timeline_plot, i,
         new_color(g, i==0 || i==4 ? "#aaf" : "#eee"));
-  timeview = new_view_time(3600, 10, g, timeline_plot);
+  timeview = new_view_time(10, g, timeline_plot);
   /* DL tick logging */
   timelog = new_timelog(h, database, "ENB_PHY_DL_TICK");
   subview = new_subview_time(timeview, 0, new_color(g, "#77c"), 3600*1000);

common/utils/T/tracer/filter/filter.c

@@ -41,6 +41,7 @@ int eval_eq(struct filter *f, event e)
 
 int eval_int(struct filter *f, event e)
 {
+  UNUSED(e);
   return f->v.v;
 }
 
@@ -152,9 +153,9 @@ filter *filter_evarg(void *database, char *event_name, char *varname)
   return ret;
 }
 
-filter *filter_evfun(void *database, int (*fun)(void *priv, int v),
-    void *priv, filter *x)
+filter *filter_evfun(void *database, int (*fun)(void *priv, int v), void *priv, filter *x)
 {
+  UNUSED(database);
   struct filter *ret = calloc(1, sizeof(struct filter));
   if (ret == NULL) abort();
   ret->eval = eval_evfun;

common/utils/T/tracer/filter/filter.h

@@ -13,11 +13,8 @@ filter *filter_and(filter *a, filter *b);
 filter *filter_eq(filter *a, filter *b);
 filter *filter_int(int v);
 filter *filter_evarg(void *database, char *event_name, char *varname);
-filter *filter_evfun(void *database, int (*fun)(void *priv, int v),
-    void *priv, filter *x);
-
+filter *filter_evfun(void *database, int (*fun)(void *priv, int v), void *priv, filter *x);
 int filter_eval(filter *f, event e);
-
 void free_filter(filter *f);
 
 #endif /* _FILTER_H_ */

common/utils/T/tracer/handler.c

@@ -52,8 +52,7 @@ event_handler *new_handler(void *database)
   return ret;
 }
 
-unsigned long register_handler_function(event_handler *_h, int event_id,
-    void (*f)(void *, event), void *p)
+unsigned long register_handler_function(event_handler *_h, int event_id, void (*f)(void *, event), void *p)
 {
   struct _event_handler *h = _h;
   unsigned long ret = h->next_id;
@@ -78,9 +77,11 @@ unsigned long register_handler_function(event_handler *_h, int event_id,
   return ret;
 }
 
-void remove_handler_function(event_handler *h, int event_id,
-    unsigned long handler_id)
+void remove_handler_function(event_handler *h, int event_id, unsigned long handler_id)
 {
+  UNUSED(h);
+  UNUSED(event_id);
+  UNUSED(handler_id);
   printf("%s:%d: TODO\n", __FILE__, __LINE__);
   abort();
 }

common/utils/T/tracer/handler.h

@@ -11,10 +11,7 @@ typedef void event_handler;
 
 event_handler *new_handler(void *database);
 void handle_event(event_handler *h, event e);
-
-unsigned long register_handler_function(event_handler *_h, int event_id,
-    void (*f)(void *, event), void *p);
-void remove_handler_function(event_handler *h, int event_id,
-    unsigned long handler_id);
+unsigned long register_handler_function(event_handler *_h, int event_id, void (*f)(void *, event), void *p);
+void remove_handler_function(event_handler *h, int event_id, unsigned long handler_id);
 
 #endif /* _HANDLER_H_ */

common/utils/T/tracer/logger/textlog.c

@@ -7,7 +7,7 @@
 #include "handler.h"
 #include "database.h"
 #include "view/view.h"
-#include "utils.h"
+#include "../utils.h"
 #include "filter/filter.h"
 #include <stdlib.h>
 #include <string.h>

common/utils/T/tracer/macpdu2wireshark.c

@@ -406,7 +406,7 @@ void sr(void *_d, event e)
 
 void trace_nr(struct timespec sending_time, ev_data *d, int direction,
         int rnti_type, int rnti, int frame, int slot, int harq_pid, void *buf,
-        int bufsize, int preamble)
+        int bufsize)
 {
   ssize_t ret;
   int i;
@@ -475,7 +475,7 @@ void nr_ul(void *_d, event e)
            NR_C_RNTI, e.e[d->nr_ul_rnti].i,
            e.e[d->nr_ul_frame].i, e.e[d->nr_ul_slot].i,
            e.e[d->nr_ul_harq_pid].i, e.e[d->nr_ul_data].b,
-           e.e[d->nr_ul_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_ul_data].bsize);
 }
 
 void nr_dl(void *_d, event e)
@@ -494,7 +494,7 @@ void nr_dl(void *_d, event e)
            e.e[d->nr_dl_rnti].i != 0xffff ? NR_C_RNTI : NR_SI_RNTI,
            e.e[d->nr_dl_rnti].i, e.e[d->nr_dl_frame].i, e.e[d->nr_dl_slot].i,
            e.e[d->nr_dl_harq_pid].i, e.e[d->nr_dl_data].b,
-           e.e[d->nr_dl_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_dl_data].bsize);
 }
 
 void nr_dl_retx(void *_d, event e)
@@ -505,7 +505,7 @@ void nr_dl_retx(void *_d, event e)
            NR_C_RNTI, e.e[d->nr_dl_retx_rnti].i,
            e.e[d->nr_dl_retx_frame].i, e.e[d->nr_dl_retx_slot].i,
            e.e[d->nr_dl_retx_harq_pid].i, e.e[d->nr_dl_retx_data].b,
-           e.e[d->nr_dl_retx_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_dl_retx_data].bsize);
 }
 
 void nr_mib(void *_d, event e)
@@ -520,7 +520,7 @@ void nr_mib(void *_d, event e)
 
   trace_nr(e.sending_time, d, NR_DIRECTION_DOWNLINK, NR_NO_RNTI, 0,
            e.e[d->nr_mib_frame].i, e.e[d->nr_mib_slot].i, 0 /* harq pid */,
-           e.e[d->nr_mib_data].b, e.e[d->nr_mib_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_mib_data].b, e.e[d->nr_mib_data].bsize);
 }
 
 void nr_ue_mib(void *_d, event e)
@@ -535,7 +535,7 @@ void nr_ue_mib(void *_d, event e)
 
   trace_nr(e.sending_time, d, NR_DIRECTION_DOWNLINK, NR_NO_RNTI, 0,
            e.e[d->nr_ue_mib_frame].i, e.e[d->nr_ue_mib_slot].i, 0 /* harq pid */,
-           e.e[d->nr_ue_mib_data].b, e.e[d->nr_ue_mib_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_ue_mib_data].b, e.e[d->nr_ue_mib_data].bsize);
 }
 
 void nr_rar(void *_d, event e)
@@ -545,7 +545,7 @@ void nr_rar(void *_d, event e)
   trace_nr(e.sending_time, d, NR_DIRECTION_DOWNLINK,
            NR_RA_RNTI, e.e[d->nr_rar_rnti].i,
            e.e[d->nr_rar_frame].i, e.e[d->nr_rar_slot].i, 0 /* harq pid */,
-           e.e[d->nr_rar_data].b, e.e[d->nr_rar_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_rar_data].b, e.e[d->nr_rar_data].bsize);
 }
 
 void nr_ue_ul(void *_d, event e)
@@ -556,7 +556,7 @@ void nr_ue_ul(void *_d, event e)
            NR_C_RNTI, e.e[d->nr_ue_ul_rnti].i,
            e.e[d->nr_ue_ul_frame].i, e.e[d->nr_ue_ul_slot].i,
            e.e[d->nr_ue_ul_harq_pid].i, e.e[d->nr_ue_ul_data].b,
-           e.e[d->nr_ue_ul_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_ue_ul_data].bsize);
 }
 
 void nr_ue_dl(void *_d, event e)
@@ -575,7 +575,7 @@ void nr_ue_dl(void *_d, event e)
            e.e[d->nr_ue_dl_rnti].i != 0xffff ? NR_C_RNTI : NR_SI_RNTI,
            e.e[d->nr_ue_dl_rnti].i, e.e[d->nr_ue_dl_frame].i,
            e.e[d->nr_ue_dl_slot].i, e.e[d->nr_ue_dl_harq_pid].i,
-           e.e[d->nr_ue_dl_data].b, e.e[d->nr_ue_dl_data].bsize, NO_PREAMBLE);
+           e.e[d->nr_ue_dl_data].b, e.e[d->nr_ue_dl_data].bsize);
 }
 
 void nr_ue_rar(void *_d, event e)
@@ -584,8 +584,7 @@ void nr_ue_rar(void *_d, event e)
   trace_nr(e.sending_time, d, DIRECTION_DOWNLINK,
            RA_RNTI, e.e[d->nr_ue_rar_rnti].i,
            e.e[d->nr_ue_rar_frame].i, e.e[d->nr_ue_rar_slot].i, 0,
-           e.e[d->nr_ue_rar_data].b, e.e[d->nr_ue_rar_data].bsize,
-           NO_PREAMBLE);
+           e.e[d->nr_ue_rar_data].b, e.e[d->nr_ue_rar_data].bsize);
 }
 
 /****************************************************************************/
@@ -961,7 +960,7 @@ static int sock = -1;
 
 void force_stop(int x)
 {
-  printf("\ngently quit...\n");
+  printf("\ngently quit(%d)...\n", x);
   close(sock);
   sock = -1;
   run = 0;

common/utils/T/tracer/record.c

@@ -39,7 +39,7 @@ static int socket = -1;
 
 void force_stop(int x)
 {
-  printf("\ngently quit...\n");
+  printf("\ngently quit (%d)...\n", x);
   close(socket);
   socket = -1;
   run = 0;

common/utils/T/tracer/record_db.cpp

@@ -249,7 +249,7 @@ static int socket_fd = -1;
 
 void force_stop(int x)
 {
-  logi("gently quit...");
+  logi("gently quit %d", x);
   close(socket_fd);
   socket_fd = -1;
   run = 0;
@@ -785,12 +785,7 @@ uint8_t should_insert(EventBuffer &buf)
   return 0;
 }
 
-int insert_event(clickhouse_config_t *ch,
-                 void *database,
-                 int event_id,
-                 const char *event_data,
-                 int data_length,
-                 std::chrono::high_resolution_clock::time_point t_start)
+int insert_event(clickhouse_config_t *ch, int event_id, const char *event_data, int data_length)
 {
   auto t_fn_start = std::chrono::high_resolution_clock::now();
 
@@ -1270,14 +1265,12 @@ int main(int n, char **v)
     if (fullread(socket_fd, v + vpos, length) == -1)
       goto read_error;
 
-    auto t_start = std::chrono::high_resolution_clock::now();
-
     if (type == -1) {
       append_received_config_chunk(v + vpos, length);
     } else if (type == -2) {
       verify_config();
     } else if (type >= 0 && type < number_of_events && is_on[type]) {
-      if (insert_event(&ch_config, database, type, v + vpos, length, t_start) != 0) {
+      if (insert_event(&ch_config, type, v + vpos, length) != 0) {
         loge("Failed to insert event type {}", type);
       }
     }

common/utils/T/tracer/ue.c

@@ -417,7 +417,7 @@ static void ue_main_gui(ue_gui *e, gui *g, event_handler *h, void *database,
   for (i = 0; i < 8; i++)
     timeline_set_subline_background_color(g, timeline_plot, i,
         new_color(g, i==0 || i==4 ? "#aaf" : "#eee"));
-  timeview = new_view_time(3600, 10, g, timeline_plot);
+  timeview = new_view_time(10, g, timeline_plot);
   /* DL tick logging */
   timelog = new_timelog(h, database, "UE_PHY_DL_TICK");
   subview = new_subview_time(timeview, 0, new_color(g, "#77c"), 3600*1000);

common/utils/T/tracer/utils.h

@@ -5,6 +5,8 @@
 #ifndef _UTILS_H_
 #define _UTILS_H_
 
+#define UNUSED(x) (void)x
+
 void new_thread(void *(*f)(void *), void *data);
 void sleepms(int ms);
 void bps(char *out, float v, char *suffix);

common/utils/T/tracer/vcd.c

@@ -100,7 +100,7 @@ static void vcd_main_gui(gui *g, event_handler *h, void *database)
   for (i = 0; i < nb_functions; i++)
     timeline_set_subline_background_color(g, w, i,
         new_color(g, i & 1 ? "#ddd" : "#eee"));
-  timeview = new_view_time(3600, 10, g, w);
+  timeview = new_view_time(10, g, w);
   i = 0;
   for (j = 0; j < n; j++) {
     if (strncmp(ids[j], "VCD_FUNCTION_", 13) != 0) continue;

common/utils/T/tracer/view/scrolltti.c

@@ -70,6 +70,7 @@ static void *scrolltti_thread(void *_this)
 static void clear(view *this)
 {
   /* TODO */
+  UNUSED(this);
 }
 
 static void insert(struct scrolltti *this, double value)

common/utils/T/tracer/view/stdout.c

@@ -3,6 +3,7 @@
  */
 
 #include "view.h"
+#include "../utils.h"
 #include <stdlib.h>
 #include <stdio.h>
 #include <pthread.h>
@@ -15,6 +16,7 @@ struct stdout {
 static void clear(view *this)
 {
   /* do nothing */
+  UNUSED(this);
 }
 
 static void append(view *_this, char *s)

common/utils/T/tracer/view/textlist.c

@@ -71,6 +71,7 @@ static void *textlist_thread(void *_this)
 static void clear(view *this)
 {
   /* TODO */
+  UNUSED(this);
 }
 
 static void append(view *_this, char *s)
@@ -120,9 +121,11 @@ static void scroll(void *private, gui *g,
   if (pthread_mutex_unlock(&this->lock)) abort();
 }
 
-static void click(void *private, gui *g,
-    char *notification, widget *w, void *notification_data)
+static void click(void *private, gui *g, char *notification, widget *w, void *notification_data)
 {
+  UNUSED(notification);
+  UNUSED(g);
+  UNUSED(w);
   struct textlist *this = private;
   int *d = notification_data;
   int button = d[1];

common/utils/T/tracer/view/ticktime.c

@@ -164,9 +164,10 @@ static void *ticktime_thread(void *_this)
   return 0;
 }
 
-static void scroll(void *private, gui *g,
-    char *notification, widget *w, void *notification_data)
+static void scroll(void *private, gui *g, char *notification, widget *w, void *notification_data)
 {
+  UNUSED(g);
+  UNUSED(w);
   struct ticktime *this = private;
   int *d = notification_data;
   int x = d[0];
@@ -225,9 +226,11 @@ end:
   if (pthread_mutex_unlock(&this->lock)) abort();
 }
 
-static void click(void *private, gui *g,
-    char *notification, widget *w, void *notification_data)
+static void click(void *private, gui *g, char *notification, widget *w, void *notification_data)
 {
+  UNUSED(g);
+  UNUSED(w);
+  UNUSED(notification);
   struct ticktime *this = private;
   int *d = notification_data;
   int button = *d;
@@ -365,9 +368,9 @@ struct clock_ticktime {
   struct ticktime *parent;
 };
 
-static void clock_append(view *_this, struct timespec t,
-    int frame, int subframe)
+static void clock_append(view *_this, struct timespec t, int frame, int subframe)
 {
+  UNUSED(t);
   struct clock_ticktime *this = (struct clock_ticktime *)_this;
   struct ticktime *tt = this->parent;
   int64_t diff;

common/utils/T/tracer/view/time.c

@@ -156,9 +156,10 @@ static void *time_thread(void *_this)
   return 0;
 }
 
-static void scroll(void *private, gui *g,
-    char *notification, widget *w, void *notification_data)
+static void scroll(void *private, gui *g, char *notification, widget *w, void *notification_data)
 {
+  UNUSED(g);
+  UNUSED(w);
   struct time *this = private;
   int *d = notification_data;
   int x = d[0];
@@ -217,9 +218,11 @@ end:
   if (pthread_mutex_unlock(&this->lock)) abort();
 }
 
-static void click(void *private, gui *g,
-    char *notification, widget *w, void *notification_data)
+static void click(void *private, gui *g, char *notification, widget *w, void *notification_data)
 {
+  UNUSED(g);
+  UNUSED(w);
+  UNUSED(notification);
   struct time *this = private;
   int *d = notification_data;
   int button = *d;
@@ -228,8 +231,7 @@ static void click(void *private, gui *g,
   if (button == 1) this->autoscroll = 1;
 }
 
-view *new_view_time(int number_of_seconds, float refresh_rate,
-    gui *g, widget *w)
+view *new_view_time(float refresh_rate, gui *g, widget *w)
 {
   struct time *ret = calloc(1, sizeof(struct time));
   if (ret == NULL) abort();

common/utils/T/tracer/view/tti.c

@@ -94,6 +94,7 @@ static void *tti_thread(void *_this)
 static void clear(view *this)
 {
   /* TODO */
+  UNUSED(this);
 }
 
 static void append(view *_this, int frame, int tick, double value)

common/utils/T/tracer/view/view.h

@@ -19,14 +19,10 @@ enum xy_mode { XY_LOOP_MODE, XY_FORCED_MODE };
 
 view *new_view_stdout(void);
 view *new_view_textlist(int maxsize, float refresh_rate, gui *g, widget *w);
-view *new_view_xy(int length, float refresh_rate, gui *g, widget *w,
-    int color, enum xy_mode mode);
-view *new_view_tti(float refresh_rate, gui *g, widget *w, int color,
-    int ticks_per_frame);
-view *new_view_scrolltti(float refresh_rate, gui *g, widget *w,
-    int color, widget *throughput_label, int ticks_per_frame);
-view *new_view_time(int number_of_seconds, float refresh_rate,
-    gui *g, widget *w);
+view *new_view_xy(int length, float refresh_rate, gui *g, widget *w, int color, enum xy_mode mode);
+view *new_view_tti(float refresh_rate, gui *g, widget *w, int color, int ticks_per_frame);
+view *new_view_scrolltti(float refresh_rate, gui *g, widget *w, int color, widget *throughput_label, int ticks_per_frame);
+view *new_view_time(float refresh_rate, gui *g, widget *w);
 view *new_subview_time(view *time, int line, int color, int size);
 view *new_view_ticktime(float refresh_rate, gui *g, widget *w);
 view *new_subview_ticktime(view *ticktime, int line, int color, int size);

common/utils/T/tracer/view/xy.c

@@ -42,6 +42,7 @@ static void *xy_thread(void *_this)
 static void clear(view *this)
 {
   /* TODO */
+  UNUSED(this);
 }
 
 static void append_loop(view *_this, float *x, float *y, int length)

common/utils/actor/actor.h

@@ -4,7 +4,7 @@
 
 #ifndef ACTOR_H
 #define ACTOR_H
-#include "notified_fifo.h"
+#include "common/utils/threadPool/notified_fifo.h"
 
 #define INIT_ACTOR(ptr, name, core_affinity) init_actor((Actor_t *)ptr, name, core_affinity);
 

common/utils/ds/CMakeLists.txt

@@ -6,6 +6,7 @@ add_library(ds OBJECT
             seq_arr.c
             hashtable.c
             obj_hashtable.c
+            spsc_q.c
 )
 
 target_include_directories(ds PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})

common/utils/ds/hashtable.c

@@ -10,42 +10,15 @@
 #include "assertions.h"
 
 
-//-------------------------------------------------------------------------------------------------------------------------------
-char *hashtable_rc_code2string(hashtable_rc_t rcP)
-//-------------------------------------------------------------------------------------------------------------------------------
-{
-  switch (rcP) {
-    case HASH_TABLE_OK:
-      return "HASH_TABLE_OK";
-      break;
-
-    case HASH_TABLE_INSERT_OVERWRITTEN_DATA:
-      return "HASH_TABLE_INSERT_OVERWRITTEN_DATA";
-      break;
-
-    case HASH_TABLE_KEY_NOT_EXISTS:
-      return "HASH_TABLE_KEY_NOT_EXISTS";
-      break;
-
-    case HASH_TABLE_KEY_ALREADY_EXISTS:
-      return "HASH_TABLE_KEY_ALREADY_EXISTS";
-      break;
-
-    case HASH_TABLE_BAD_PARAMETER_HASHTABLE:
-      return "HASH_TABLE_BAD_PARAMETER_HASHTABLE";
-      break;
-
-    default:
-      return "UNKNOWN hashtable_rc_t";
-  }
-}
-//-------------------------------------------------------------------------------------------------------------------------------
 /*
  * free int function
  * hash_free_int_func() is used when this hashtable is used to store int values as data (pointer = value).
  */
 
-void hash_free_int_func(void *memoryP) {}
+void hash_free_int_func(void *memoryP)
+{
+  UNUSED(memoryP);
+}
 
 //-------------------------------------------------------------------------------------------------------------------------------
 /*
@@ -144,41 +117,6 @@ hashtable_rc_t hashtable_is_key_exists (const hash_table_t *const hashtblP, cons
 
   return HASH_TABLE_KEY_NOT_EXISTS;
 }
-//-------------------------------------------------------------------------------------------------------------------------------
-hashtable_rc_t hashtable_dump_content (const hash_table_t *const hashtblP, char *const buffer_pP, int *const remaining_bytes_in_buffer_pP )
-//-------------------------------------------------------------------------------------------------------------------------------
-{
-  hash_node_t  *node         = NULL;
-  unsigned int  i            = 0;
-
-  if (hashtblP == NULL) {
-    *remaining_bytes_in_buffer_pP = snprintf(
-                                      buffer_pP,
-                                      *remaining_bytes_in_buffer_pP,
-                                      "HASH_TABLE_BAD_PARAMETER_HASHTABLE");
-    return HASH_TABLE_BAD_PARAMETER_HASHTABLE;
-  }
-
-  while ((i < hashtblP->size) && (*remaining_bytes_in_buffer_pP > 0)) {
-    if (hashtblP->nodes[i] != NULL) {
-      node=hashtblP->nodes[i];
-
-      while(node) {
-        *remaining_bytes_in_buffer_pP = snprintf(
-                                          buffer_pP,
-                                          *remaining_bytes_in_buffer_pP,
-                                          "Key 0x%"PRIx64" Element %p\n",
-                                          node->key,
-                                          node->data);
-        node=node->next;
-      }
-    }
-
-    i += 1;
-  }
-
-  return HASH_TABLE_OK;
-}
 
 //-------------------------------------------------------------------------------------------------------------------------------
 /*

common/utils/ds/hashtable.h

@@ -44,12 +44,10 @@ typedef struct hash_table_iterator_s {
   const hash_table_t* const hashtbl;
 } hash_table_iterator_s;
 
-char           *hashtable_rc_code2string(hashtable_rc_t rcP);
 void            hash_free_int_func(void *memoryP);
 hash_table_t   *hashtable_create (const hash_size_t   size, hash_size_t (*hashfunc)(const hash_key_t ), void (*freefunc)(void *));
 hashtable_rc_t  hashtable_destroy(hash_table_t **hashtbl);
 hashtable_rc_t  hashtable_is_key_exists (const hash_table_t *const hashtbl, const uint64_t key);
-hashtable_rc_t  hashtable_dump_content (const hash_table_t *const hashtblP, char *const buffer_pP, int *const remaining_bytes_in_buffer_pP );
 hashtable_rc_t  hashtable_insert (hash_table_t *const hashtbl, const hash_key_t key, void *data);
 hashtable_rc_t  hashtable_remove (hash_table_t *const hashtbl, const hash_key_t key);
 hashtable_rc_t  hashtable_get    (const hash_table_t *const hashtbl, const hash_key_t key, void **dataP);

common/utils/ds/spsc_q.c

@@ -0,0 +1,90 @@
+/*
+ * SPDX-License-Identifier: LicenseRef-CSSL-1.0
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+#include "spsc_q.h"
+
+spsc_q_t spsc_q_alloc(size_t cnt, size_t elsiz)
+{
+  /* internally, use one element more: the ringbuffer is full if
+   * (write_idx + 1) % cnt == read_idx, so it's full if one element is still
+   * free (because otherwise write_idx == read_idx, but this is the empty
+   * condition) */
+  cnt += 1;
+  spsc_q_t rb = {.cnt = cnt, .elsiz = elsiz};
+  rb.buf = calloc(cnt, elsiz);
+  return rb;
+}
+
+void spsc_q_free(spsc_q_t *rb)
+{
+  free(rb->buf);
+  memset(rb, 0, sizeof(*rb));
+}
+
+bool spsc_q_put(spsc_q_t *rb, const void *src, size_t elsiz)
+{
+  assert(elsiz == rb->elsiz);
+  size_t w = atomic_load_explicit(&rb->write_idx, memory_order_relaxed);
+  size_t r = atomic_load_explicit(&rb->read_idx, memory_order_acquire);
+  if ((w + 1) % rb->cnt == r) {
+    return false;
+  }
+
+  uint8_t *bufpos = &rb->buf[w * rb->elsiz];
+  memcpy(bufpos, src, elsiz);
+  atomic_store_explicit(&rb->write_idx, (w + 1) % rb->cnt, memory_order_release);
+  return true;
+}
+
+bool spsc_q_get_if(spsc_q_t *rb, pred p, void *user, void *dest, size_t elsiz)
+{
+  assert(elsiz == rb->elsiz);
+  size_t w = atomic_load_explicit(&rb->write_idx, memory_order_acquire);
+  size_t r = atomic_load_explicit(&rb->read_idx, memory_order_relaxed);
+  if (w == r) {
+    return false;
+  }
+
+  uint8_t *bufpos = &rb->buf[rb->read_idx * rb->elsiz];
+  if (!p(bufpos, user)) {
+    return false;
+  }
+
+  if (dest)
+    memcpy(dest, bufpos, elsiz);
+  atomic_store_explicit(&rb->read_idx, (r + 1) % rb->cnt, memory_order_release);
+  return true;
+}
+
+static bool always(const void *data, void *user)
+{
+  (void) data;
+  (void) user;
+  return true;
+}
+bool spsc_q_get(spsc_q_t *rb, void *dest, size_t elsiz)
+{
+  return spsc_q_get_if(rb, always, NULL, dest, elsiz);
+}
+
+int spsc_q_get_while(spsc_q_t *rb, pred p, void *user, void *dest, size_t elsiz, size_t max_len)
+{
+  assert(elsiz == rb->elsiz);
+  size_t count = 0;
+  while (count < max_len && spsc_q_get_if(rb, p, user, dest + elsiz * count, elsiz))
+    count++;
+  return count;
+}
+
+int spsc_q_drop_while(spsc_q_t *rb, pred p, void *user)
+{
+  size_t dropped = 0;
+  while (spsc_q_get_if(rb, p, user, NULL, rb->elsiz))
+    dropped++;
+  return dropped;
+}

common/utils/ds/spsc_q.h

@@ -0,0 +1,37 @@
+/*
+ * SPDX-License-Identifier: LicenseRef-CSSL-1.0
+ */
+
+#ifndef SPSC_Q_H_
+#define SPSC_Q_H_
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdatomic.h>
+
+#if defined(__cplusplus)
+// use atomic_size_t to help interworking with C++
+using std::atomic_size_t;
+#endif
+
+typedef struct spsc_q {
+  uint8_t *buf;
+  size_t elsiz;
+  size_t cnt;
+
+  atomic_size_t write_idx;
+  atomic_size_t read_idx;
+} spsc_q_t;
+
+spsc_q_t spsc_q_alloc(size_t cnt, size_t elsiz);
+void spsc_q_free(spsc_q_t *rb);
+
+bool spsc_q_put(spsc_q_t *rb, const void *src, size_t elsiz);
+bool spsc_q_get(spsc_q_t *rb, void *dest, size_t elsiz);
+
+typedef bool (*pred)(const void *data, void *user);
+bool spsc_q_get_if(spsc_q_t *rb, pred p, void *user, void *dest, size_t elsiz);
+int spsc_q_drop_while(spsc_q_t *rb, pred p, void *user);
+int spsc_q_get_while(spsc_q_t *rb, pred p, void *user, void *dest, size_t elsiz, size_t max_len);
+
+#endif /* SPSC_Q_H_ */

common/utils/ds/tests/CMakeLists.txt

@@ -8,5 +8,11 @@ add_test(NAME test_seq_arr COMMAND test_seq_arr) # no options required
 add_executable(test_hashtable test_hashtable.cpp)
 add_dependencies(tests test_hashtable)
 target_link_libraries(test_hashtable PRIVATE ds GTest::gtest)
-add_test(NAME test_hashtable
-  COMMAND ./test_hashtable)
+add_test(NAME test_hashtable COMMAND ./test_hashtable)
+
+add_executable(test_spsc_q test_spsc_q.cpp)
+target_link_libraries(test_spsc_q ds GTest::gtest)
+add_dependencies(tests test_spsc_q)
+add_test(NAME test_spsc_q COMMAND test_spsc_q)
+add_executable(test_spsc_q_perf test_spsc_q_perf.cpp)
+target_link_libraries(test_spsc_q_perf PRIVATE ds benchmark::benchmark)

common/utils/ds/tests/test_spsc_q.cpp

@@ -0,0 +1,135 @@
+/*
+ * SPDX-License-Identifier: LicenseRef-CSSL-1.0
+ */
+
+#include "gtest/gtest.h"
+extern "C" {
+#include "spsc_q.h"
+}
+
+TEST(spsc_q, basic_test) {
+  spsc_q_t rb = spsc_q_alloc(2, sizeof(int));
+
+  int a = 1;
+  EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+  EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+  EXPECT_FALSE(spsc_q_put(&rb, &a, sizeof(a)));
+
+  int b;
+  EXPECT_TRUE(spsc_q_get(&rb, &b, sizeof(b)));
+  EXPECT_EQ(a, b);
+  EXPECT_TRUE(spsc_q_get(&rb, &b, sizeof(b)));
+  EXPECT_EQ(a, b);
+  EXPECT_FALSE(spsc_q_get(&rb, &b, sizeof(b)));
+
+  spsc_q_free(&rb);
+}
+
+TEST(spsc_q, cont_write) {
+  spsc_q_t rb = spsc_q_alloc(10, sizeof(int));
+
+  int a = 1;
+  for (int i = 0; i < 1111; ++i) {
+    EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+    a++;
+    EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+    a++;
+    EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+    a++;
+
+    int b;
+    EXPECT_TRUE(spsc_q_get(&rb, &b, sizeof(b)));
+    EXPECT_EQ(b, a - 3);
+    EXPECT_TRUE(spsc_q_get(&rb, &b, sizeof(b)));
+    EXPECT_EQ(b, a - 2);
+    EXPECT_TRUE(spsc_q_get(&rb, &b, sizeof(b)));
+    EXPECT_EQ(b, a - 1);
+  }
+
+  spsc_q_free(&rb);
+}
+
+bool count(const void *data, void *user)
+{
+  EXPECT_TRUE(data != NULL);
+  int *c = (int *)user;
+  (*c)++;
+  return true; /* count all */
+}
+TEST(spsc_q, iterator) {
+  spsc_q_t rb = spsc_q_alloc(10, sizeof(int));
+  int n = 8;
+  for (int i = 0; i < n; ++i)
+    EXPECT_TRUE(spsc_q_put(&rb, &i, sizeof(i)));
+
+  int c = 0;
+  int results[n];
+  int ret = spsc_q_get_while(&rb, count, &c, results, sizeof(*results), n);
+  EXPECT_EQ(c, n);
+  EXPECT_EQ(ret, n);
+  for (int i = 0; i < n; ++i)
+    EXPECT_EQ(results[i], i);
+
+  int b;
+  EXPECT_FALSE(spsc_q_get(&rb, &b, sizeof(b))); /* empty! */
+
+  spsc_q_free(&rb);
+}
+
+bool drop(const void *data, void *user)
+{
+  const int *e = (const int *)data;
+  int *c = (int *)user;
+  EXPECT_EQ(*e, *c);
+  (*c)++;
+  return true; /* drop all */
+}
+TEST(spsc_q, drop) {
+  spsc_q_t rb = spsc_q_alloc(10, sizeof(int));
+  int n = 8;
+  for (int i = 0; i < n; ++i)
+    EXPECT_TRUE(spsc_q_put(&rb, &i, sizeof(i)));
+
+  int c = 0;
+  int ret = spsc_q_drop_while(&rb, drop, &c);
+  EXPECT_EQ(c, n);
+  EXPECT_EQ(ret, n);
+
+  int b;
+  EXPECT_FALSE(spsc_q_get(&rb, &b, sizeof(b))); /* empty! */
+
+  spsc_q_free(&rb);
+}
+
+
+TEST(spsc_q, full) {
+  int n = 3;
+  spsc_q_t rb = spsc_q_alloc(n, sizeof(int));
+  int a = 1;
+  EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+  a++;
+  EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+  a++;
+  EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+  a++;
+  EXPECT_FALSE(spsc_q_put(&rb, &a, sizeof(a))); /* full! */
+
+  int b;
+  EXPECT_TRUE(spsc_q_get(&rb, &b, sizeof(b)));
+  EXPECT_EQ(b, a - n);
+
+  EXPECT_TRUE(spsc_q_put(&rb, &a, sizeof(a)));
+  a++;
+  EXPECT_FALSE(spsc_q_put(&rb, &a, sizeof(a))); /* full! */
+
+  EXPECT_TRUE(spsc_q_get(&rb, &b, sizeof(b)));
+  EXPECT_EQ(b, a - n);
+
+  spsc_q_free(&rb);
+}
+
+int main(int argc, char** argv)
+{
+  testing::InitGoogleTest(&argc, argv);
+  return RUN_ALL_TESTS();
+}

common/utils/ds/tests/test_spsc_q_perf.cpp

@@ -0,0 +1,75 @@
+#include "benchmark/benchmark.h"
+#include "stdio.h"
+#include "assert.h"
+#include "pthread.h"
+
+extern "C" {
+#include "spsc_q.h"
+}
+
+typedef struct q_args {
+  spsc_q_t q;
+  int range;
+} q_args_t;
+
+static void *producer(void *arg)
+{
+  q_args_t *a = (q_args_t *) arg;
+  int i = 0;
+  while (i <= a->range) {
+    if (spsc_q_put(&a->q, &i, sizeof(i)))
+      i++;
+  }
+  return NULL;
+}
+
+static void *consumer(void *arg)
+{
+  q_args_t *a = (q_args_t *) arg;
+  int i = 0;
+  while (i != a->range) {
+    int r;
+    if (spsc_q_get(&a->q, &r, sizeof(r))) {
+      assert(r == i);
+      i++;
+    }
+  }
+  return NULL;
+}
+
+static void run_test(int range, int q_size)
+{
+  q_args_t args = {
+    .q = spsc_q_alloc(q_size, sizeof(int)),
+    .range = range,
+  };
+
+  pthread_t p, c;
+  int ret;
+  // start
+  ret = pthread_create(&p, NULL, producer, &args);
+  assert(ret == 0);
+  ret = pthread_create(&c, NULL, consumer, &args);
+  assert(ret == 0);
+
+  ret = pthread_join(p, NULL);
+  assert(ret == 0);
+  ret = pthread_join(c, NULL);
+  assert(ret == 0);
+  // stop
+  // data/time => throughput
+
+  spsc_q_free(&args.q);
+}
+
+static void BM_spsc_q(benchmark::State &state)
+{
+  int range = 500000;
+  int q_size = state.range(0);
+  for (auto _ : state)
+    run_test(range, q_size);
+}
+
+BENCHMARK(BM_spsc_q)->RangeMultiplier(2)->Range(10, 160);
+
+BENCHMARK_MAIN();

common/utils/fsn.c

@@ -0,0 +1,55 @@
+/*
+ * SPDX-License-Identifier: LicenseRef-CSSL-1.0
+ */
+
+#include "fsn.h"
+
+#include <assert.h>
+
+static int num_slots[5] = {10, 20, 40, 80, 160};
+
+fsn_t fsn_add_delta(fsn_t fsn, uint32_t delta)
+{
+  const int slots_frame = num_slots[fsn.mu];
+  int next_f = fsn.f + delta / slots_frame;
+  int next_s = fsn.s + delta % slots_frame;
+  fsn_t res = {
+    .f = (next_f + next_s / slots_frame) % 1024,
+    .s = next_s % slots_frame,
+    .mu = fsn.mu,
+  };
+  return res;
+}
+
+int fsn_get_diff(fsn_t a, fsn_t b)
+{
+  assert(a.mu == b.mu);
+  const int slots_frame = num_slots[a.mu];
+  int diff = (a.f * slots_frame + a.s) - (b.f * slots_frame + b.s);
+  if (diff < -512 * slots_frame)
+    diff += 1024 * slots_frame;
+  else if (diff > 512 * slots_frame)
+    diff -= 1024 * slots_frame;
+  return diff;
+}
+
+fsn_t fsn_get_max(fsn_t a, fsn_t b)
+{
+  if (fsn_get_diff(a, b) <= 0) {
+    return b;
+  } else {
+    return a;
+  }
+}
+
+bool fsn_equal(fsn_t a, fsn_t b)
+{
+  assert(a.mu == b.mu);
+  return a.f == b.f && a.s == b.s && a.mu == b.mu;
+}
+
+bool fsn_in_the_past(fsn_t old, fsn_t new)
+{
+  int diff = fsn_get_diff(old, new);
+  return diff < 0;
+}

common/utils/fsn.h

@@ -0,0 +1,36 @@
+/*
+ * SPDX-License-Identifier: LicenseRef-CSSL-1.0
+ */
+
+#ifndef FSN_H_
+#define FSN_H_
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/// helper type to encapsulate a frame/slot combination in a single type.
+typedef struct fsn {
+  uint16_t f; /// frame
+  uint16_t s; /// slot
+  uint8_t mu; /// numerology
+} fsn_t;
+
+/* \brief Add delta slots to fsn. Note that this depends also on the stored
+ * numerology inside fsn. */
+fsn_t fsn_add_delta(fsn_t fsn, uint32_t delta);
+
+/* \brief Get difference of slots for a and b.
+ * \note asserts if numerology not the same. */
+int fsn_get_diff(fsn_t a, fsn_t b);
+
+/* \brief Gets the larger of two fsns */
+fsn_t fsn_get_max(fsn_t a, fsn_t b);
+
+/* \brief Compare if both fsn_t's are equal */
+bool fsn_equal(fsn_t a, fsn_t b);
+
+/* \brief Determine if told is in the past of tnew. The threshold is 512
+ * frames. */
+bool fsn_in_the_past(fsn_t told, fsn_t tnew);
+
+#endif /* FSN_H_ */

common/utils/nr/nr_common.h

@@ -13,6 +13,7 @@
 #include <stdlib.h>
 #include "assertions.h"
 #include "common/utils/utils.h"
+#include "common/utils/ds/byte_array.h"
 
 #define MAX_SI_GROUPS 3
 #define NR_MAX_PDSCH_TBS 3824
@@ -79,10 +80,32 @@ static inline const char *rnti_types(nr_rnti_type_t rr)
 // the total shift is 2 * 15, in dB scale thats 10log10(2^(15*2))
 #define SQ15_SQUARED_NORM_FACTOR_DB 90.3089986992
 
+typedef enum {
+  NR_SIB_1 = 1,
+  NR_SIB_2,
+  NR_SIB_3,
+  NR_SIB_4,
+  NR_SIB_5,
+  NR_SIB_6,
+  NR_SIB_7,
+  NR_SIB_8,
+  NR_SIB_9,
+  NR_SIB_10,
+  NR_SIB_11,
+  NR_SIB_12,
+  NR_SIB_13,
+  NR_SIB_14,
+  NR_SIB_15,
+  NR_SIB_16,
+  NR_SIB_17,
+  NR_SIB_18,
+  NR_SIB_19,
+  NR_SIB_20,
+  NR_SIB_21,
+} nr_sib_type_t;
+
 typedef struct {
-  uint8_t *SIB_buffer;
-  int SIB_size;
-  int SIB_type;
+  nr_sib_type_t SIB_type;
 } nr_SIBs_t;
 
 typedef struct nr_bandentry_s {

common/utils/system.c

@@ -284,12 +284,8 @@ void threadCreate(pthread_t* t, void * (*func)(void*), void * param, char* name,
 
 // Legacy, pthread_create + thread_top_init() should be replaced by threadCreate
 // threadCreate encapsulates the posix pthread api
-void thread_top_init(char *thread_name,
-		     int affinity,
-		     uint64_t runtime,
-		     uint64_t deadline,
-		     uint64_t period) {
-  
+void thread_top_init(char *thread_name)
+{
   int policy, s, j;
   struct sched_param sparam;
   char cpu_affinity[1024];

common/utils/system.h

@@ -36,11 +36,7 @@ void threadCreate(pthread_t *t, void *(*func)(void *), void *param, char *name,
 #define OAI_PRIORITY_RT ((sched_get_priority_min(SCHED_OAI)+sched_get_priority_max(SCHED_OAI))/2)
 #define OAI_PRIORITY_RT_MAX sched_get_priority_max(SCHED_OAI)-2
 
-void thread_top_init(char *thread_name,
-                     int affinity,
-                     uint64_t runtime,
-                     uint64_t deadline,
-                     uint64_t period);
+void thread_top_init(char *thread_name);
 
 /****************************************************
  * Functions to check system at runtime.

common/utils/telnetsrv/telnetsrv.c

@@ -81,7 +81,6 @@ int get_phybsize(void) {
 };
 int add_telnetcmd(char *modulename,telnetshell_vardef_t *var, telnetshell_cmddef_t *cmd );
 int setoutput(char *buff, int debug, telnet_printfunc_t prnt);
-int wsetoutput(char *buff, int debug, telnet_printfunc_t prnt, ...);
 int setparam(char *buff, int debug, telnet_printfunc_t prnt);
 int wsetparam(char *buff, int debug, telnet_printfunc_t prnt, ...);
 int history_cmd(char *buff, int debug, telnet_printfunc_t prnt);
@@ -245,12 +244,9 @@ void redirstd(char *newfname,telnet_printfunc_t prnt ) {
   }
 }
 
-int wsetoutput(char *buffer, int debug, telnet_printfunc_t prnt, ...)
+int setoutput(char *buff, int debug, telnet_printfunc_t prnt)
 {
-  return 0;
-}
-
-int setoutput(char *buff, int debug, telnet_printfunc_t prnt) {
+  UNUSED(debug);
   char cmds[TELNET_MAX_MSGLENGTH/TELNET_CMD_MAXSIZE][TELNET_CMD_MAXSIZE];
   char *logfname;
   char stdout_str[64];
@@ -288,10 +284,16 @@ int setoutput(char *buff, int debug, telnet_printfunc_t prnt) {
 
 int wsetparam(char *buff, int debug, telnet_printfunc_t prnt, ...)
 {
+  UNUSED(buff);
+  UNUSED(debug);
+  UNUSED(prnt);
   return 0;
 }
 
-int setparam(char *buff, int debug, telnet_printfunc_t prnt) {
+int setparam(char *buff, int debug, telnet_printfunc_t prnt)
+{
+  UNUSED(debug);
+  UNUSED(prnt);
   char cmds[TELNET_MAX_MSGLENGTH/TELNET_CMD_MAXSIZE][TELNET_CMD_MAXSIZE];
   memset(cmds,0,sizeof(cmds));
   sscanf(buff,"%9s %9s %9s %9s %9s", cmds[0],cmds[1],cmds[2],cmds[3],cmds[4]  );
@@ -322,7 +324,9 @@ int setparam(char *buff, int debug, telnet_printfunc_t prnt) {
   return CMDSTATUS_NOTFOUND;
 } /* setparam */
 
-int history_cmd(char *buff, int debug, telnet_printfunc_t prnt) {
+int history_cmd(char *buff, int debug, telnet_printfunc_t prnt)
+{
+  UNUSED(debug);
   char cmds[TELNET_MAX_MSGLENGTH/TELNET_CMD_MAXSIZE][TELNET_CMD_MAXSIZE];
   memset(cmds,0,sizeof(cmds));
   sscanf(buff,"%9s %9s %9s %9s %9s", cmds[0],cmds[1],cmds[2],cmds[3],cmds[4]  );
@@ -502,7 +506,7 @@ void telnet_pushcmd(telnetshell_cmddef_t *cmd, char *cmdbuff, telnet_printfunc_t
   pushNotifiedFIFO(cmd->qptr, msg);
 }
 
-int process_command(char *buf, int iteration)
+int process_command(char *buf)
 {
   int i,j,k;
   char modulename[TELNET_CMD_MAXSIZE];
@@ -581,7 +585,7 @@ int process_command(char *buf, int iteration)
         char tbuff[64];
         client_printf(CSI "1J" CSI "1;10H         " STDFMT "%s %i/%i\n",
                       get_time(tbuff,sizeof(tbuff)),lc,telnetparams.loopcount );
-        process_command(buf + strlen("loop") + 1, lc);
+        process_command(buf + strlen("loop") + 1);
         errno=0;
         int rs = read(telnetparams.new_socket,dummybuff,sizeof(dummybuff));
 
@@ -710,7 +714,7 @@ void run_telnetsrv(void) {
       }
 
       if (strlen(buf) > 2 ) {
-        status = process_command(buf, 0);
+        status = process_command(buf);
       } else
         status=CMDSTATUS_NOCMD;
 

common/utils/telnetsrv/telnetsrv_bearer.c

@@ -28,6 +28,7 @@ static int get_single_ue_rnti(void)
 
 int get_single_rnti(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (buf)
     ERROR_MSG_RET("no parameter allowed\n");
 
@@ -42,6 +43,7 @@ int get_single_rnti(char *buf, int debug, telnet_printfunc_t prnt)
 //void rrc_gNB_trigger_new_bearer(int rnti);
 int add_bearer(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   int rnti = -1;
   if (!buf) {
     rnti = get_single_ue_rnti();
@@ -67,6 +69,7 @@ int add_bearer(char *buf, int debug, telnet_printfunc_t prnt)
 //void rrc_gNB_trigger_release_bearer(int rnti);
 int release_bearer(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   int rnti = -1;
   if (!buf) {
     rnti = get_single_ue_rnti();

common/utils/telnetsrv/telnetsrv_ci.c

@@ -47,6 +47,7 @@ static int get_single_ue_rnti_mac(void)
 
 int get_single_rnti(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (buf)
     ERROR_MSG_RET("no parameter allowed\n");
 
@@ -81,6 +82,7 @@ rrc_gNB_ue_context_t *get_single_rrc_ue(void)
 
 int get_reestab_count(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (!RC.nrrrc)
     ERROR_MSG_RET("no RRC present, cannot list counts\n");
   rrc_gNB_ue_context_t *ue = NULL;
@@ -119,6 +121,7 @@ int fetch_rnti(char *buf, telnet_printfunc_t prnt)
 
 int trigger_reestab(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (!RC.nrmac)
     ERROR_MSG_RET("no MAC/RLC present, cannot trigger reestablishment\n");
   int rnti = fetch_rnti(buf, prnt);
@@ -134,6 +137,7 @@ extern nr_rrc_du_container_t *get_du_for_ue(gNB_RRC_INST *rrc, uint32_t ue_id);
 /** @brief Get connected DU by the UE ID */
 int fetch_du_by_ue_id(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (!RC.nrrrc)
     ERROR_MSG_RET("no RRC present, cannot list counts\n");
 
@@ -169,6 +173,7 @@ extern void nr_HO_F1_trigger_telnet(gNB_RRC_INST *rrc, uint32_t rrc_ue_id);
  */
 int rrc_gNB_trigger_f1_ho(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (!RC.nrrrc)
     ERROR_MSG_RET("no RRC present, cannot list counts\n");
   rrc_gNB_ue_context_t *ue = NULL;
@@ -198,6 +203,7 @@ extern void nr_HO_N2_trigger_telnet(gNB_RRC_INST *rrc, uint32_t neighbour_pci, u
  *  @return 0 on success, -1 on failure */
 int rrc_gNB_trigger_n2_ho(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (!RC.nrrrc)
     ERROR_MSG_RET("no RRC present, cannot list counts\n");
 
@@ -238,6 +244,7 @@ int rrc_gNB_trigger_n2_ho(char *buf, int debug, telnet_printfunc_t prnt)
 
 int force_ul_failure(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (!RC.nrmac)
     ERROR_MSG_RET("no MAC/RLC present, force_ul_failure failed\n");
   int rnti = fetch_rnti(buf, prnt);
@@ -263,6 +270,7 @@ int force_ue_release(char *buf, int debug, telnet_printfunc_t prnt)
 
 static int get_current_bwp(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   int rnti = fetch_rnti(buf, prnt);
   if (rnti < 0)
     ERROR_MSG_RET("could not identify UE (no UE, no such RNTI, or multiple UEs)\n");
@@ -288,6 +296,7 @@ static int get_current_bwp(char *buf, int debug, telnet_printfunc_t prnt)
  * @return 0 on success; negative value on error. */
 static int trigger_ngap_pdu_session_release(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   if (buf == NULL) {
     ERROR_MSG_RET("Missing input. Usage: trigger_pdu_session_release [ue_id=gNB_ue_ngap_id(int,opt)],pdusession_id(int)[,pdusession_id(int)...]\n");
   }
@@ -360,6 +369,7 @@ static int trigger_ngap_pdu_session_release(char *buf, int debug, telnet_printfu
 
 static int trigger_bwp_switch(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   char *sbwpId = strtok(buf, " ");
   int bwpId = atoi(sbwpId);
   char *srnti = strtok(NULL, " ");

common/utils/telnetsrv/telnetsrv_ciUE.c

@@ -52,6 +52,7 @@ static int get_default_ue_id(void)
  */
 int get_sync_state(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   int ue_id = -1;
   if (!buf) {
     ERROR_MSG_RET("no UE ID provided to telnet command\n");
@@ -71,6 +72,9 @@ int get_sync_state(char *buf, int debug, telnet_printfunc_t prnt)
  */
 int force_rlf(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
+  UNUSED(buf);
+  UNUSED(prnt);
   NR_UE_RRC_INST_t *rrc = get_NR_UE_rrc_inst(0);
   handle_rlf_detection(rrc);
   return 0;
@@ -81,6 +85,9 @@ int force_rlf(char *buf, int debug, telnet_printfunc_t prnt)
  */
 int force_RRC_IDLE(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
+  UNUSED(buf);
+  UNUSED(prnt);
   NR_UE_RRC_INST_t *rrc = get_NR_UE_rrc_inst(0);
   nr_rrc_going_to_IDLE(rrc, OTHER, NULL);
   return 0;
@@ -89,6 +96,9 @@ int force_RRC_IDLE(char *buf, int debug, telnet_printfunc_t prnt)
 /** @brief Trigger RA with Msg3 C-RNTI */
 int force_crnti_ra(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
+  UNUSED(buf);
+  UNUSED(prnt);
   NR_UE_MAC_INST_t *mac = get_mac_inst(0);
   trigger_MAC_UE_RA(mac, NULL);
   return 0;
@@ -96,6 +106,9 @@ int force_crnti_ra(char *buf, int debug, telnet_printfunc_t prnt)
 
 static int force_deregistration(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
+  UNUSED(buf);
+  UNUSED(prnt);
   MessageDef *msg = itti_alloc_new_message(TASK_NAS_NRUE, 0, NAS_DEREGISTRATION_REQ);
   NAS_DEREGISTRATION_REQ(msg).cause = AS_DETACH;
   itti_send_msg_to_task(TASK_NAS_NRUE, 0, msg);
@@ -105,6 +118,8 @@ static int force_deregistration(char *buf, int debug, telnet_printfunc_t prnt)
 extern float get_prs_max_dl_toa(prs_meas_t *prs_meas);
 static int get_dl_toa(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
+  UNUSED(buf);
   // TODO multiple antennas, resources, gNBs?
   int gNB_id = 0;
   int rsc_id = 0;
@@ -124,6 +139,7 @@ static int get_dl_toa(char *buf, int debug, telnet_printfunc_t prnt)
 
 static int add_pdu_session(char *buf, int debug, telnet_printfunc_t prnt)
 {
+  UNUSED(debug);
   int ue_id = -1;
   int pdusession_id = -1;
 

common/utils/telnetsrv/telnetsrv_enb_phycmd.c

@@ -46,11 +46,15 @@ void dump_uestats(int debug, telnet_printfunc_t prnt, uint8_t prntflag) {
 }
 
 void display_uestats(int debug, telnet_printfunc_t prnt, int ue) {
+  UNUSED(debug);
+  UNUSED(prnt);
+  UNUSED(ue);
   for (int cc=0; cc<1 ; cc++) {
   }
 }
 
 void display_phycounters(char *buf, int debug, telnet_printfunc_t prnt) {
+  UNUSED(buf);
   prnt("  DLSCH kb      DLSCH kb/s\n");
   dump_uestats(debug, prnt,0);
 }