update encoder

LDPC cuda cn_Proc parts successfully work in the ldpctest

See merge request oai/openairinterface5g!3469

CMakeLists.txt

@@ -108,6 +108,7 @@ add_list_string_option(CMAKE_BUILD_TYPE "RelWithDebInfo" "Choose the type of bui
 # -so to avoid AVX512 instructions generation by gcc
 if(EXISTS "/proc/cpuinfo" AND NOT CROSS_COMPILE)
   file(STRINGS "/proc/cpuinfo" CPUFLAGS REGEX flags LIMIT_COUNT 1)
+  file(STRINGS "/proc/cpuinfo" CPUPART REGEX "CPU part" LIMIT_COUNT 1)
 else()
   message(WARNING "did not find /proc/cpuinfo -- not setting any x86-specific compilation variables")
 endif()
@@ -146,9 +147,20 @@ elseif(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
     set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -DSIMDE_X86_SSSE3_NATIVE")
   endif()
 elseif (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
-  set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
+    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
 elseif (CMAKE_SYSTEM_PROCESSOR STREQUAL "aarch64")
-  set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -lgcc -lrt")
+# Neoverse CPU part codes available at https://github.com/util-linux/util-linux/blob/master/sys-utils/lscpu-arm.c
+  if (CPUPART MATCHES "0xd40") # Neoverse-V1
+    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-v1 -lgcc -lrt")
+  elseif (CPUPART MATCHES "0xd4f") # Neoverse-V2
+    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-v2 -ftree-vectorize -lgcc -lrt")
+  elseif (CPUPART MATCHES "0xd0c") # Neoverse-N1
+    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-n1  -lgcc -lrt")
+  elseif (CPUPART MATCHES "0xd49") # Neoverse-N2
+    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=neoverse-n2 -ftree-vectorize -lgcc -lrt")
+  else ()
+    set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -gdwarf-2 -mcpu=native -lgcc -lrt")
+  endif()
 else()
   message(FATAL_ERROR "compile for CPU architecture ${CPUARCH}, CMAKE_SYSTEM_PROCESSOR ${CMAKE_SYSTEM_PROCESSOR}")
 endif()
@@ -812,18 +824,14 @@ set(PHY_SRC_COMMON
   ${OPENAIR1_DIR}/PHY/CODING/viterbi_lte.c
   ${OPENAIR1_DIR}/PHY/INIT/init_top.c
   ${OPENAIR1_DIR}/PHY/INIT/lte_parms.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dfts_load.c
   ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
   ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
   ${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/lut.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
   ${OPENAIR1_DIR}/PHY/TOOLS/get_sin_cos.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/oai_arith_operations.c
   )
 
 set(PHY_SRC
@@ -943,21 +951,16 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gen_mod_table.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/dmrs_nr.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/ptrs_nr.c
-  ${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_csi_rs.c
   ${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
   ${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_freq_equalization.c
   ${OPENAIR1_DIR}/PHY/NR_ESTIMATION/nr_measurements_gNB.c
   ${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
   ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
   ${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/lut.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/oai_arith_operations.c
   ${PHY_POLARSRC}
   ${PHY_SMALLBLOCKSRC}
   ${PHY_NRLDPC_CODINGIF}
@@ -1001,16 +1004,12 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_ue_measurements.c
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_adjust_gain.c
   ${OPENAIR1_DIR}/PHY/TOOLS/file_output.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cadd_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/log2_approx.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_sv.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/cmult_vv.c
   ${OPENAIR1_DIR}/PHY/TOOLS/cdot_prod.c
   ${OPENAIR1_DIR}/PHY/TOOLS/signal_energy.c
   ${OPENAIR1_DIR}/PHY/TOOLS/dB_routines.c
   ${OPENAIR1_DIR}/PHY/TOOLS/sqrt.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/lut.c
-  ${OPENAIR1_DIR}/PHY/TOOLS/simde_operations.c
+  ${OPENAIR1_DIR}/PHY/TOOLS/oai_arith_operations.c
   ${OPENAIR1_DIR}/PHY/INIT/nr_init_ue.c
   ${PHY_POLARSRC}
   ${PHY_SMALLBLOCKSRC}
@@ -1150,8 +1149,6 @@ set(L2_NR_SRC
   ${NR_RRC_DIR}/mac_rrc_dl_f1ap.c
   ${NR_RRC_DIR}/nr_rrc_config.c
   ${NR_RRC_DIR}/rrc_gNB_nsa.c
-  ${NR_RRC_DIR}/rrc_gNB_internode.c
-  ${NR_RRC_DIR}/rrc_gNB_reconfig.c
   ${NR_RRC_DIR}/rrc_gNB_UE_context.c
   ${NR_RRC_DIR}/rrc_gNB_NGAP.c
   ${NR_RRC_DIR}/rrc_gNB_radio_bearers.c
@@ -1378,7 +1375,6 @@ include_directories("${OPENAIR1_DIR}/SCHED_NR_UE")
 ##########################
 
 add_library (GTPV1U
-  ${NR_RRC_DIR}/rrc_gNB_GTPV1U.c
   ${RRC_DIR}/rrc_eNB_GTPV1U.c
   ${OPENAIR3_DIR}/ocp-gtpu/gtp_itf.cpp
   )
@@ -2067,6 +2063,7 @@ foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim pr
     pthread m rt CONFIG_LIB ${T_LIB} dl shlib_loader
     )
   target_link_libraries(${myExe} PRIVATE asn1_lte_rrc_hdrs)
+  add_dependencies(${myExe} coding)
 
 endforeach(myExe)
 
@@ -2119,12 +2116,18 @@ include(${OPENAIR1_DIR}/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/CMakeLists.txt)
 
 set(ENABLE_TESTS OFF CACHE STRING "Activate build of tests")
 set_property(CACHE ENABLE_TESTS PROPERTY TYPE BOOL)
-if(ENABLE_TESTS)
-  # activates globally adding tests such that they can be run using ctest
-  enable_testing()
+set(ENABLE_PHYSIM_TESTS OFF CACHE STRING "Activate build of physim tests")
+set_property(CACHE ENABLE_PHYSIM_TESTS PROPERTY TYPE BOOL)
+
+if(ENABLE_TESTS OR ENABLE_PHYSIM_TESTS)
   # meta-target: each test is supposed to add_dependencies(tests ${NEWTEST})
   # then, it is possible to build and execute all tests using "ninja tests && ctest"
   add_custom_target(tests)
+  # activates globally adding tests such that they can be run using ctest
+  enable_testing()
+endif()
+
+if(ENABLE_TESTS)
   find_package(GTest)
   if (NOT GTest_FOUND)
     message(STATUS "GTest package not found, will download googletest automatically. To prevent that install google test on your system (libgtest-dev)")

README.md

@@ -4,10 +4,9 @@
 
 <p align="center">
     <a href="https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/master/LICENSE"><img src="https://img.shields.io/badge/license-OAI--Public--V1.1-blue" alt="License"></a>
-    <a href="https://releases.ubuntu.com/20.04/"><img src="https://img.shields.io/badge/OS-Ubuntu20-Green" alt="Supported OS Ubuntu 20"></a>
     <a href="https://releases.ubuntu.com/22.04/"><img src="https://img.shields.io/badge/OS-Ubuntu22-Green" alt="Supported OS Ubuntu 22"></a>
     <a href="https://releases.ubuntu.com/24.04/"><img src="https://img.shields.io/badge/OS-Ubuntu24-Green" alt="Supported OS Ubuntu 24"></a>
-    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RELH9"></a>
+    <a href="https://www.redhat.com/en/technologies/linux-platforms/enterprise-linux"><img src="https://img.shields.io/badge/OS-RHEL9-Green" alt="Supported OS RHEL9"></a>
     <a href="https://getfedora.org/en/workstation/"><img src="https://img.shields.io/badge/OS-Fedore41-Green" alt="Supported OS Fedora 41"></a>
 </p>
 
@@ -16,7 +15,9 @@
 </p>
 
 <p align="center">
-    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Container-Parent/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Container-Parent%2F&label=build%20Images"></a>
+    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu18-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu18-Image-Builder%2F&label=build-Ubuntu-x86%20Images"></a>
+    <a href="https://jenkins-oai.eurecom.fr/job/RAN-RHEL8-Cluster-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-RHEL8-Cluster-Image-Builder%2F&label=build-UBI-x86%20Images"></a>
+    <a href="https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu-ARM-Image-Builder/"><img src="https://img.shields.io/jenkins/build?jobUrl=https%3A%2F%2Fjenkins-oai.eurecom.fr%2Fjob%2FRAN-Ubuntu-ARM-Image-Builder%2F&label=build-Ubuntu-ARM%20Images"></a>
 </p>
 
 <p align="center">

charts/physims-4g/charts/physims.4g/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-ulsim
-description: A Helm subchart for ulsim network function
+name: oai-physims-4g
+description: A Helm subchart for 4G physims network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,7 +24,6 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
-  - ulsim
   - RAN
   - 4G
 

charts/physims-4g/charts/physims.4g/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-polartest.name" -}}
+{{- define "oai-physims-4g.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-polartest.fullname" -}}
+{{- define "oai-physims-4g.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-polartest.chart" -}}
+{{- define "oai-physims-4g.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-polartest.labels" -}}
-helm.sh/chart: {{ include "oai-polartest.chart" . }}
-{{ include "oai-polartest.selectorLabels" . }}
+{{- define "oai-physims-4g.labels" -}}
+helm.sh/chart: {{ include "oai-physims-4g.chart" . }}
+{{ include "oai-physims-4g.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-polartest.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-polartest.name" . }}
+{{- define "oai-physims-4g.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-physims-4g.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-polartest.serviceAccountName" -}}
+{{- define "oai-physims-4g.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-polartest.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-physims-4g.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims-4g/charts/physims.4g/templates/job.yaml

@@ -31,8 +31,9 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.basic" -d bin/ &&
-          echo "FINISHED" && sleep infinity
+          ctest -R 4g --show-only=json-v1 >> physims-4g-tests.json &&
+          ctest -R 4g -j$(nproc) --output-junit physims-4g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
+          echo "FINISHED" && sleep 15
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -43,5 +44,5 @@ spec:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
       {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrdlsimbasic }}
+      nodeName: {{ .Values.global.nodeName.physims5g }}
       {{- end }}

charts/physims-4g/charts/physims.4g/values.yaml

@@ -1,4 +1,4 @@
-# Default values for oai-ulsim.
+# Default values for oai-physims-4g
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
@@ -20,7 +20,7 @@ serviceAccount:
   annotations: {}
   # The name of the service account to use.
   # If not set and create is true, a name is generated using the fullname template
-  name: "oai-ulsim-sa"
+  name: "oai-physims-4g"
 
 podSecurityContext:
   runAsUser: 0

charts/physims-4g/values.yaml

@@ -6,7 +6,7 @@ global:
   namespace: "OAICICD_PROJECT"
   image:
     registry: local
-    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-ran/oai-physim
+    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-core-for-ci-ran/oai-physim
     version: TAG
     # pullPolicy: IfNotPresent or Never or Always
     pullPolicy: Always

charts/physims-5g/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-polartest
-description: A Helm subchart for polartest network function
+name: oai-physim
+description: A Helm chart for physical simulators network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -16,17 +16,17 @@ icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_fin
 
 # This is the chart version. This version number should be incremented each time you make changes
 # to the chart and its templates, including the app version.
-version: 0.1.1
+version: 1.0.0
 
 # This is the version number of the application being deployed. This version number should be
 # incremented each time you make changes to the application.
 appVersion: v1
 
 keywords:
-  - Physical Simulator
-  - polartest
+  - Physical Simulators
   - RAN
   - 4G
+  - 5G
 
 sources:
   - https://gitlab.eurecom.fr/oai/openairinterface5g

charts/physims-5g/charts/physims.5g/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
-name: oai-ldpctest
-description: A Helm subchart for ldpctest network function
+name: oai-physims-5g
+description: A Helm subchart for 5G physims network function
 
 # A chart can be either an 'application' or a 'library' chart.
 #
@@ -24,7 +24,6 @@ appVersion: v1
 
 keywords:
   - Physical Simulator
-  - ldpctest
   - RAN
   - 5G
 

charts/physims-5g/charts/physims.5g/templates/_helpers.tpl

@@ -2,7 +2,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "oai-ulsim.name" -}}
+{{- define "oai-physims-5g.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
@@ -11,7 +11,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "oai-ulsim.fullname" -}}
+{{- define "oai-physims-5g.fullname" -}}
 {{- if .Values.fullnameOverride -}}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
 {{- else -}}
@@ -27,16 +27,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "oai-ulsim.chart" -}}
+{{- define "oai-physims-5g.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
 {{- end -}}
 
 {{/*
 Common labels
 */}}
-{{- define "oai-ulsim.labels" -}}
-helm.sh/chart: {{ include "oai-ulsim.chart" . }}
-{{ include "oai-ulsim.selectorLabels" . }}
+{{- define "oai-physims-5g.labels" -}}
+helm.sh/chart: {{ include "oai-physims-5g.chart" . }}
+{{ include "oai-physims-5g.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -46,17 +46,17 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "oai-ulsim.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-ulsim.name" . }}
+{{- define "oai-physims-5g.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "oai-physims-5g.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end -}}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "oai-ulsim.serviceAccountName" -}}
+{{- define "oai-physims-5g.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-ulsim.fullname" .) .Values.serviceAccount.name }}
+    {{ default (include "oai-physims-5g.fullname" .) .Values.serviceAccount.name }}
 {{- else -}}
     {{ default "default" .Values.serviceAccount.name }}
 {{- end -}}

charts/physims-5g/charts/physims.5g/templates/job.yaml

@@ -31,8 +31,9 @@ spec:
         command: ["/bin/sh", "-c"]
         args:
         - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "ldpctest" -d bin/ &&
-          echo "FINISHED" && sleep infinity
+          ctest -R 5g --show-only=json-v1 >> physims-5g-tests.json &&
+          ctest -R 5g -j$(nproc) --output-junit physims-5g-run.xml --test-output-size-passed 100000 --test-output-size-failed 100000 ;
+          echo "FINISHED" && sleep 20
       dnsPolicy: ClusterFirst
       restartPolicy: Never
       schedulerName: default-scheduler
@@ -43,5 +44,5 @@ spec:
          {{- toYaml .Values.global.nodeSelector | nindent 12 }}
       {{- end }}
       {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.ldpctest }}
+      nodeName: {{ .Values.global.nodeName.physims5g }}
       {{- end }}

charts/physims-5g/charts/physims.5g/values.yaml

@@ -1,4 +1,4 @@
-# Default values for oai-ldpctest.
+# Default values for oai-physims-5g
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 
@@ -20,7 +20,7 @@ serviceAccount:
   annotations: {}
   # The name of the service account to use.
   # If not set and create is true, a name is generated using the fullname template
-  name: "oai-ldpctest-sa"
+  name: "oai-physims-5g"
 
 podSecurityContext:
   runAsUser: 0

charts/physims-5g/templates/rbac.yaml

@@ -0,0 +1,26 @@
+apiVersion: rbac.authorization.k8s.io/v1
+kind: Role
+metadata:
+  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
+rules:
+- apiGroups:
+  - security.openshift.io
+  resourceNames:
+  - anyuid
+  resources:
+  - securitycontextconstraints
+  verbs:
+  - use
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: RoleBinding
+metadata:
+  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-binding
+subjects:
+- kind: ServiceAccount
+  name: {{ .Values.global.serviceAccountName }}
+  namespace: {{ .Release.Namespace }}
+roleRef:
+  kind: Role
+  name: {{ .Chart.Name }}-{{ .Release.Namespace }}-role
+  apiGroup: rbac.authorization.k8s.io

charts/physims-5g/templates/serviceaccount.yaml

@@ -0,0 +1,4 @@
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: oai-physim-sa #{{ .Values.global.serviceAccountName }}

charts/physims-5g/values.yaml

@@ -0,0 +1,21 @@
+# Default values for oai-physim.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+global:
+  serviceAccountName: oai-physim-sa
+  namespace: "OAICICD_PROJECT"
+  image:
+    registry: local
+    repository: image-registry.openshift-image-registry.svc:5000/oaicicd-core-for-ci-ran/oai-physim
+    version: TAG
+    # pullPolicy: IfNotPresent or Never or Always
+    pullPolicy: Always
+  # removing the node selector
+  # will place on two nodes intel 3rd gen and 5th gen with RT kernel
+  nodeSelector:
+    type: ran
+  nodeName: ''
+  resources:
+    define: false
+    requests:
+      cpu: 1.5

charts/physims/charts/dlsim.100rb+tm2/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-dlsim-100rb-tm2
-description: A Helm subchart for dlsim network function ("100rb+tm2" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - dlsim
-  - RAN
-  - 4G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/dlsim.100rb+tm2/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-dlsim-100rb-tm2.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-dlsim-100rb-tm2.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-dlsim-100rb-tm2.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-dlsim-100rb-tm2.labels" -}}
-helm.sh/chart: {{ include "oai-dlsim-100rb-tm2.chart" . }}
-{{ include "oai-dlsim-100rb-tm2.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-dlsim-100rb-tm2.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-dlsim-100rb-tm2.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-dlsim-100rb-tm2.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-dlsim-100rb-tm2.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/dlsim.100rb+tm2/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.100rb+tm2" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.dlsim100rbtm2 }}
-      {{- end }}

charts/physims/charts/dlsim.100rb+tm2/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-dlsim-100rb+tm2
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-dlsim-100rb-tm2"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/dlsim.basic/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-dlsim-basic
-description: A Helm subchart for dlsim network function ("basic" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - dlsim
-  - RAN
-  - 4G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/dlsim.basic/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-dlsim-basic.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-dlsim-basic.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-dlsim-basic.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-dlsim-basic.labels" -}}
-helm.sh/chart: {{ include "oai-dlsim-basic.chart" . }}
-{{ include "oai-dlsim-basic.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-dlsim-basic.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-dlsim-basic.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-dlsim-basic.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/dlsim.basic/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}    
-spec:
-  template:
-    metadata:
-      labels:
-         app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "dlsim.basic" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }} 
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.dlsimbasic }}
-      {{- end }}

charts/physims/charts/dlsim.basic/values.yaml

@@ -1,44 +0,0 @@
-# Default values for oai-dlsim-basic
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-dlsim-basic"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources:
-   limits:
-     cpu: 100m
-     memory: 128Mi
-   requests:
-     cpu: 100m
-     memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/ldpctest/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-ldpctest.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-ldpctest.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-ldpctest.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-ldpctest.labels" -}}
-helm.sh/chart: {{ include "oai-ldpctest.chart" . }}
-{{ include "oai-ldpctest.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-ldpctest.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-ldpctest.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-ldpctest.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-ldpctest.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-dlschsim/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-dlschsim
-description: A Helm subchart for nr-dlschsim network function
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-dlschsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-dlschsim/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-dlschsim.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-dlschsim.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-dlschsim.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-dlschsim.labels" -}}
-helm.sh/chart: {{ include "oai-nr-dlschsim.chart" . }}
-{{ include "oai-nr-dlschsim.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-dlschsim.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-dlschsim.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-dlschsim.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-dlschsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-dlschsim/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlschsim" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrdlschsim }}
-      {{- end }}

charts/physims/charts/nr-dlschsim/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-dlschsim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-dlschsim-sa"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-dlsim.basic/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-dlsim-basic
-description: A Helm subchart for nr-dlsim network function ("basic" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-dlsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.basic/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-dlsim-basic.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-dlsim-basic.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-dlsim-basic.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-dlsim-basic.labels" -}}
-helm.sh/chart: {{ include "oai-nr-dlsim-basic.chart" . }}
-{{ include "oai-nr-dlsim-basic.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-dlsim-basic.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-dlsim-basic.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-dlsim-basic.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-dlsim-basic.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-dlsim.basic/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-dlsim-basic
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-dlsim-basic"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-dlsim.dmrs+ptrs/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-dlsim-dmrs-ptrs
-description: A Helm subchart for nr-dlsim network function ("dmrs+ptrs" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-dlsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-dlsim-dmrs-ptrs.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-dlsim-dmrs-ptrs.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-dlsim-dmrs-ptrs.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-dlsim-dmrs-ptrs.labels" -}}
-helm.sh/chart: {{ include "oai-nr-dlsim-dmrs-ptrs.chart" . }}
-{{ include "oai-nr-dlsim-dmrs-ptrs.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-dlsim-dmrs-ptrs.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-dlsim-dmrs-ptrs.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-dlsim-dmrs-ptrs.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-dlsim-dmrs-ptrs.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-dlsim.dmrs+ptrs/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.dmrs+ptrs" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrdlsimdmrsptrs }}
-      {{- end }}

charts/physims/charts/nr-dlsim.dmrs+ptrs/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-dlsim-dmrs+ptrs
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-dlsim-dmrs-ptrs"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-dlsim.mcs+mimo/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-dlsim-mcs-mimo
-description: A Helm subchart for nr-dlsim network function ("mcs+mimo" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-dlsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.mcs+mimo/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-dlsim-mcs-mimo.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-dlsim-mcs-mimo.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-dlsim-mcs-mimo.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-dlsim-mcs-mimo.labels" -}}
-helm.sh/chart: {{ include "oai-nr-dlsim-mcs-mimo.chart" . }}
-{{ include "oai-nr-dlsim-mcs-mimo.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-dlsim-mcs-mimo.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-dlsim-mcs-mimo.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-dlsim-mcs-mimo.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-dlsim-mcs-mimo.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-dlsim.mcs+mimo/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.mcs+mimo" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrdlsimmcsmimo }}
-      {{- end }}

charts/physims/charts/nr-dlsim.mcs+mimo/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-dlsim-mcs-mimo
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-dlsim-mcs-mimo"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-dlsim.offset/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-dlsim-offset
-description: A Helm subchart for nr-dlsim network function ("offset" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-dlsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-dlsim.offset/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-dlsim-offset.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-dlsim-offset.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-dlsim-offset.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-dlsim-offset.labels" -}}
-helm.sh/chart: {{ include "oai-nr-dlsim-offset.chart" . }}
-{{ include "oai-nr-dlsim-offset.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-dlsim-offset.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-dlsim-offset.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-dlsim-offset.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-dlsim-offset.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-dlsim.offset/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_dlsim.offset" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrdlsimoffset }}
-      {{- end }}

charts/physims/charts/nr-dlsim.offset/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-dlsim-offset
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-dlsim-offset"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-pbchsim.106rb/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-pbchsim-106rb
-description: A Helm subchart for nr-pbchsim network function ("106rb" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-pbchsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.106rb/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-pbchsim-106rb.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-pbchsim-106rb.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-pbchsim-106rb.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-pbchsim-106rb.labels" -}}
-helm.sh/chart: {{ include "oai-nr-pbchsim-106rb.chart" . }}
-{{ include "oai-nr-pbchsim-106rb.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-pbchsim-106rb.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-pbchsim-106rb.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-pbchsim-106rb.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-pbchsim-106rb.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-pbchsim.106rb/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.106rb" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrpbschsim106rb }}
-      {{- end }}

charts/physims/charts/nr-pbchsim.106rb/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-pbchsim-106rb
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-pbchsim-106rb"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-pbchsim.217rb/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-pbchsim-217rb
-description: A Helm subchart for nr-pbchsim network function ("217rb" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-pbchsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.217rb/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-pbchsim-217rb.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-pbchsim-217rb.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-pbchsim-217rb.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-pbchsim-217rb.labels" -}}
-helm.sh/chart: {{ include "oai-nr-pbchsim-217rb.chart" . }}
-{{ include "oai-nr-pbchsim-217rb.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-pbchsim-217rb.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-pbchsim-217rb.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-pbchsim-217rb.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-pbchsim-217rb.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-pbchsim.217rb/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.217rb" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrpbchsim217rb }}
-      {{- end }}

charts/physims/charts/nr-pbchsim.217rb/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-pbchsim-217rb
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-pbchsim-217rb"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-pbchsim.273rb/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-pbchsim-273rb
-description: A Helm subchart for nr-pbchsim network function ("273rb" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-pbchsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.273rb/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-pbchsim-273rb.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-pbchsim-273rb.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-pbchsim-273rb.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-pbchsim-273rb.labels" -}}
-helm.sh/chart: {{ include "oai-nr-pbchsim-273rb.chart" . }}
-{{ include "oai-nr-pbchsim-273rb.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-pbchsim-273rb.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-pbchsim-273rb.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-pbchsim-273rb.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-pbchsim-273rb.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-pbchsim.273rb/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.273rb" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
-      {{- end }}

charts/physims/charts/nr-pbchsim.273rb/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-pbchsim-273rb
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-pbchsim-273rb"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-pbchsim.scs/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-pbchsim-scs
-description: A Helm subchart for nr-pbchsim network function ("Other SCS" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-pbchsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-pbchsim.scs/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-pbchsim-scs.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-pbchsim-scs.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-pbchsim-scs.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-pbchsim-scs.labels" -}}
-helm.sh/chart: {{ include "oai-nr-pbchsim-scs.chart" . }}
-{{ include "oai-nr-pbchsim-scs.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-pbchsim-scs.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-pbchsim-scs.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-pbchsim-scs.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-pbchsim-scs.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-pbchsim.scs/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pbchsim.otherSCS" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrpbchsim273rb }}
-      {{- end }}

charts/physims/charts/nr-pbchsim.scs/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-pbchsim-scs
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-pbchsim-scs"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-prachsim/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-prachsim
-description: A Helm subchart for nr-prachsim network function
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-prachsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-prachsim/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-prachsim.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-prachsim.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-prachsim.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-prachsim.labels" -}}
-helm.sh/chart: {{ include "oai-nr-prachsim.chart" . }}
-{{ include "oai-nr-prachsim.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-prachsim.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-prachsim.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-prachsim.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-prachsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-prachsim/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_prachsim" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrprachsim }}
-      {{- end }}

charts/physims/charts/nr-prachsim/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-prachsim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-prachsim-sa"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-psbchsim/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-psbchsim
-description: A Helm subchart for nr-psbchsim network function
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-psbchsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-psbchsim/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-psbchsim.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-psbchsim.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-psbchsim.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-psbchsim.labels" -}}
-helm.sh/chart: {{ include "oai-nr-psbchsim.chart" . }}
-{{ include "oai-nr-psbchsim.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-psbchsim.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-psbchsim.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-psbchsim.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-psbchsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-psbchsim/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_psbchsim" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrpsbchsim }}
-      {{- end }}

charts/physims/charts/nr-psbchsim/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-psbchsim
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-psbchsim"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-pucchsim/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-pucchsim
-description: A Helm subchart for nr-pucchsim network function
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-pucchsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-pucchsim/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-pucchsim.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-pucchsim.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-pucchsim.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-pucchsim.labels" -}}
-helm.sh/chart: {{ include "oai-nr-pucchsim.chart" . }}
-{{ include "oai-nr-pucchsim.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-pucchsim.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-pucchsim.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-pucchsim.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-pucchsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-pucchsim/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_pucchsim" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrpucchsim }}
-      {{- end }}

charts/physims/charts/nr-pucchsim/values.yaml

@@ -1,52 +0,0 @@
-# Default values for oai-nr-pucchsim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-pucchsim-sa"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-service:
-  type: ClusterIP
-  port: 80
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-ulschsim/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-ulschsim
-description: A Helm subchart for nr-ulschsim network function
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-ulschsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-ulschsim/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-ulschsim.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-ulschsim.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-ulschsim.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-ulschsim.labels" -}}
-helm.sh/chart: {{ include "oai-nr-ulschsim.chart" . }}
-{{ include "oai-nr-ulschsim.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-ulschsim.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-ulschsim.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-ulschsim.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-ulschsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-ulschsim/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulschsim" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrulschsim }}
-      {{- end }}

charts/physims/charts/nr-ulschsim/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-ulschsim.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-ulschsim-sa"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-ulsim.3gpp/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-ulsim-3gpp
-description: A Helm subchart for nr-ulsim network function ("3gpp" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-ulsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.3gpp/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-ulsim-3gpp.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-ulsim-3gpp.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-ulsim-3gpp.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-ulsim-3gpp.labels" -}}
-helm.sh/chart: {{ include "oai-nr-ulsim-3gpp.chart" . }}
-{{ include "oai-nr-ulsim-3gpp.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-ulsim-3gpp.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-ulsim-3gpp.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-ulsim-3gpp.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-ulsim.3gpp/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.3gpp" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrulsim3gpp }}
-      {{- end }}

charts/physims/charts/nr-ulsim.3gpp/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-ulsim-3gpp
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-ulsim-3gpp"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-ulsim.mimo/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-ulsim-mimo
-description: A Helm subchart for nr-ulsim network function ("mimo" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-ulsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.mimo/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-ulsim-mimo.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-ulsim-mimo.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-ulsim-mimo.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-ulsim-mimo.labels" -}}
-helm.sh/chart: {{ include "oai-nr-ulsim-mimo.chart" . }}
-{{ include "oai-nr-ulsim-mimo.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-ulsim-mimo.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-ulsim-mimo.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-ulsim-mimo.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-ulsim.mimo/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.mimo" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrulsimmimo }}
-      {{- end }}

charts/physims/charts/nr-ulsim.mimo/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-ulsim-mimo
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-ulsim-mimo"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-ulsim.misc/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-ulsim-misc
-description: A Helm subchart for nr-ulsim network function ("misc" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-ulsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.misc/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-ulsim-misc.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-ulsim-misc.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-ulsim-misc.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-ulsim-misc.labels" -}}
-helm.sh/chart: {{ include "oai-nr-ulsim-misc.chart" . }}
-{{ include "oai-nr-ulsim-misc.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-ulsim-misc.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-ulsim-misc.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-ulsim-misc.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-ulsim.misc/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.misc" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrulsimmisc }}
-      {{- end }}

charts/physims/charts/nr-ulsim.misc/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-ulsim-misc
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-ulsim-misc"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/nr-ulsim.sc-fdma/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-nr-ulsim-sc-fdma
-description: A Helm subchart for nr-ulsim network function ("sc-fdma" tests)
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - nr-ulsim
-  - RAN
-  - 5G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/nr-ulsim.sc-fdma/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-nr-ulsim-sc-fdma.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-nr-ulsim-sc-fdma.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-nr-ulsim-sc-fdma.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-nr-ulsim-sc-fdma.labels" -}}
-helm.sh/chart: {{ include "oai-nr-ulsim-sc-fdma.chart" . }}
-{{ include "oai-nr-ulsim-sc-fdma.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-nr-ulsim-sc-fdma.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-nr-ulsim-sc-fdma.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-nr-ulsim-sc-fdma.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-nr-ulsim.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/nr-ulsim.sc-fdma/templates/job.yaml

@@ -1,49 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        ports:
-        - containerPort: 80
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "nr_ulsim.sc-fdma" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.nrulsimscfdma }}
-      {{- end }}

charts/physims/charts/nr-ulsim.sc-fdma/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-nr-ulsim-sc-fdma
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-nr-ulsim-sc-fdma"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/polartest/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "polartest" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.polartest }}
-      {{- end }}

charts/physims/charts/polartest/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-polartest.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-polartest-sa"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}

charts/physims/charts/smallblocktest/Chart.yaml

@@ -1,36 +0,0 @@
-apiVersion: v1
-name: oai-smallblocktest
-description: A Helm subchart for smallblocktest network function
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-icon: http://www.openairinterface.org/wp-content/uploads/2015/06/cropped-oai_final_logo.png
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-version: 0.1.1
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application.
-appVersion: v1
-
-keywords:
-  - Physical Simulator
-  - smallblocktest
-  - RAN
-  - 4G
-
-sources:
-  - https://gitlab.eurecom.fr/oai/openairinterface5g
-
-maintainers:
-  - name:  OPENAIRINTERFACE
-    email: contact@openairinterface.org

charts/physims/charts/smallblocktest/templates/_helpers.tpl

@@ -1,63 +0,0 @@
-{{/* vim: set filetype=mustache: */}}
-{{/*
-Expand the name of the chart.
-*/}}
-{{- define "oai-smallblocktest.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Create a default fully qualified app name.
-We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
-If release name contains chart name it will be used as a full name.
-*/}}
-{{- define "oai-smallblocktest.fullname" -}}
-{{- if .Values.fullnameOverride -}}
-{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
-{{- end -}}
-
-{{/*
-Create chart name and version as used by the chart label.
-*/}}
-{{- define "oai-smallblocktest.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-
-{{/*
-Common labels
-*/}}
-{{- define "oai-smallblocktest.labels" -}}
-helm.sh/chart: {{ include "oai-smallblocktest.chart" . }}
-{{ include "oai-smallblocktest.selectorLabels" . }}
-{{- if .Chart.AppVersion }}
-app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
-{{- end }}
-app.kubernetes.io/managed-by: {{ .Release.Service }}
-{{- end -}}
-
-{{/*
-Selector labels
-*/}}
-{{- define "oai-smallblocktest.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "oai-smallblocktest.name" . }}
-app.kubernetes.io/instance: {{ .Release.Name }}
-{{- end -}}
-
-{{/*
-Create the name of the service account to use
-*/}}
-{{- define "oai-smallblocktest.serviceAccountName" -}}
-{{- if .Values.serviceAccount.create -}}
-    {{ default (include "oai-smallblocktest.fullname" .) .Values.serviceAccount.name }}
-{{- else -}}
-    {{ default "default" .Values.serviceAccount.name }}
-{{- end -}}
-{{- end -}}

charts/physims/charts/smallblocktest/templates/job.yaml

@@ -1,47 +0,0 @@
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ .Chart.Name }}
-spec:
-  template:
-    metadata:
-      labels:
-        app: physim
-    spec:
-      securityContext:
-        {{- toYaml .Values.podSecurityContext | nindent 8 }}
-    {{- if .Values.imagePullSecrets }}
-      imagePullSecrets:
-        {{- toYaml . | nindent 8 }}
-    {{- end }}
-      containers:
-      - name: physim
-        image: "{{ .Values.global.image.repository }}:{{ .Values.global.image.version }}"
-        imagePullPolicy: {{ .Values.image.pullPolicy }}
-        {{- if .Values.global.resources.define}}
-        resources:
-          requests:
-            cpu: {{ .Values.global.resources.requests.cpu | quote }}
-        {{- end}}
-        securityContext:
-          {{- toYaml .Values.securityContext | nindent 12 }}
-        env:
-        - name: OPENAIR_DIR
-          value: /opt/oai-physim
-        command: ["/bin/sh", "-c"]
-        args:
-        - >
-          cmake_targets/autotests/run_exec_autotests.bash -g "smallblocktest" -d bin/ &&
-          echo "FINISHED" && sleep infinity
-      dnsPolicy: ClusterFirst
-      restartPolicy: Never
-      schedulerName: default-scheduler
-      serviceAccountName: {{ .Values.global.serviceAccountName }}
-      terminationGracePeriodSeconds: 30
-      {{- if .Values.global.nodeSelector}}
-      nodeSelector:
-         {{- toYaml .Values.global.nodeSelector | nindent 12 }}
-      {{- end }}
-      {{- if .Values.global.nodeName}}
-      nodeName: {{ .Values.global.nodeName.smallblocktest }}
-      {{- end }}

charts/physims/charts/smallblocktest/values.yaml

@@ -1,48 +0,0 @@
-# Default values for oai-smallblocktest.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-
-replicaCount: 1
-
-image:
-  # pullPolicy: IfNotPresent or Never or Always
-  pullPolicy: Always
-
-imagePullSecrets: []
-
-nameOverride: ""
-fullnameOverride: ""
-
-serviceAccount:
-  # Specifies whether a service account should be created
-  create: true
-  # Annotations to add to the service account
-  annotations: {}
-  # The name of the service account to use.
-  # If not set and create is true, a name is generated using the fullname template
-  name: "oai-smallblocktest-sa"
-
-podSecurityContext:
-  runAsUser: 0
-  runAsGroup: 0
-
-securityContext:
-  privileged: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  # limits:
-  #   cpu: 100m
-  #   memory: 128Mi
-  # requests:
-  #   cpu: 100m
-  #   memory: 128Mi
-
-nodeSelector: {}
-
-tolerations: []
-
-affinity: {}