this keeps the same logic as before, the understanding is that executing the GPIO command requires time or at least have an impact on the timing, so it is better not to execute it if not necessary
Signed-off-by: francescomani <email@francescomani.it>
Remove unnecessary log
We already check for number of received samples above after receiving.
When aligned to the slot boundary for synchronization, this length of
the samples is no longer samples_per_slot. # Please enter a commit
message to explain why this merge is necessary,
We already check for number of received samples above after receiving.
When aligned to the slot boundary for synchronization, this length
of the samples is no longer samples_per_slot.
Signed-off-by: Rakesh Mundlamuri <rakesh.mundlamuri@openairinterface.org>
Validate signed MR commits and update contribution guidelines
This MR adds validation for signed merge request commits and updates the
contributing guidelines including the requirement for signing commits.
- The CI will warn in the Verify Guidelines stage if any commit in the
merge request is unsigned.
- Checks all commits in the MR source branch that are not present in
the target branch
- It then verifies if all these commits are signed
- Update contributing guidelines to include commit rules and signing
commits using git commit -s.
- The CI will also check if there are any merge commits and fail the
pipeline in that case.
fix (F1 Handover): do not trigger when no DRB is configured
Prevent triggering F1 handover for UEs without any DRB, to align with
3GPP TS 38.473 clause 8.3.1.2 and avoid initiating an invalid UE Context
Setup Request in the F1 handover flow.
Changes:
- Add a preliminary check in nr_rrc_trigger_f1_ho() to verify at least
one DRB exists in ue->drbs
- Abort F1 HO trigger early when no DRB is present, with warning
spsc_q: make compile on older compilers
While compiling the spsc_q unit tests on older compilers, some complain
with
/openairinterface5g/common/utils/ds/tests/test_spsc_q.cpp:11:44: error: use of deleted function ‘spsc_q::spsc_q(spsc_q&&)’
spsc_q_t rb = spsc_q_alloc(2, sizeof(int));
/openairinterface5g/common/utils/ds/spsc_q.h:19:16: error: use of deleted function ‘std::atomic<long unsigned int>::atomic(const std::atomic<long unsigned int>&)’
These compiles cannot copy the atomic. Change the API to avoid this
copy.
"Older" compiler here means g++-11/12.
- Add a new script to validate for signed commits
- Post a GitLab MR Warning comment listing the unsigned commit details
Signed-off-by: Shubhika Garg <shubhika.garg@openairinterface.org>
Prevent triggering F1 handover for UEs without any DRB, to align
with 3GPP TS 38.473 clause 8.3.1.2 and avoid initiating an invalid
UE Context Setup Request in the F1 handover flow.
Changes:
- Add a preliminary check in `nr_rrc_trigger_f1_ho()` to verify at
least one DRB exists in ue->drbs
- Abort F1 HO trigger early when no DRB is present, with warning
Add 200MHz DDDSU Liteon configuration file
Adding 200MHz DDDSU 2x2 Liteon configuration file. I think we should keep
only 200 MHz configuration for both FR2 RUs: Liteon and Microamp.
Achieved throughputs are DL: 980 Mbps UL 90 Mbps
While compiling the spsc_q unit tests on some compilers, some
complain with
/openairinterface5g/common/utils/ds/tests/test_spsc_q.cpp:11:44: error: use of deleted function ‘spsc_q::spsc_q(spsc_q&&)’
spsc_q_t rb = spsc_q_alloc(2, sizeof(int));
/openairinterface5g/common/utils/ds/spsc_q.h:19:16: error: use of deleted function ‘std::atomic<long unsigned int>::atomic(const std::atomic<long unsigned int>&)’
These compiles cannot copy the atomic. Change the API to avoid this
copy.
"Older" compiler here means g++-11/12.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Move the subframe scaling logic outside the PRACH slot loop to prevent the
subframe index from being incorrectly multiplied multiple times when there
are multiple PRACH slots per subframe.
Add AoA selection to vrtsim
Adds AoA as a selection parameter in vrtsim. Different UEs can be
configured at different arrival angles, emulating distinct spatial
locations, which can serve as an enabler for beamforming evaluation.
fix(nrLDPC_coding): Remove ldpc_xdma
Arguments for removing:
- There are no resources to maintain it. Including no machine with the
board.
- There is no clue that someone is actually using it.
- The library is not standard/cannot be generalized. It was designed for
a specific solution and cannot be used for another.
- The standard AAL (BBDev or other) should be privileged for LDPC offload
to a hardware accelerator.
Integration `2026.w17`
* !4054 Minor fixes to gNB/UE behavior in RFsim
* !4062 Minor fixes/cleanup in NGAP lib
* !4036 Fix CSI-RS estimation
* !4055 fix (RRC): do not trigger N2 HO when no active PDU sessions are present
* !3988 asn1c inside local tree
* !3762 L1 gNB type0 PDSCH
* !4069 ctest: fix tests when compiling with sanitizers, ignore build directories, fix spsc_q build
* !4067 Small compilation fixes
* !3444 7.2 FHI with XRAN K release
* !4061 T-Tracer & Data Recording v1.1: UL PHY trace modularization and recording enhancements
* !3975 ZMQ radio
* Increase PRACH queue capacity from 8 to 16
* !4059 CI: Various CI adjustments
Closes#1074 and #1073
See merge request oai/openairinterface5g!4063
CI: Various CI adjustments
- RAN-SA-FHI72-CN5G: activate/inactive carriers on VVDN RU - to check if
it improves reliability and stability of the pipeline
- RAN-SA-FHI72-CN5G: update CN with new IP range - avoid IP address
overlap with CN used in RAN-SA-AERIAL-XXX pipelines
- RAN-SA-B200-Module-SABOX-Container: test with deltaMCS in SC-FDMA test
case
- RAN-NSA-B200-Module-LTEBOX-Container: adjust PRACH DTX threshold to
reduce number of false RA attempts on eNB
- remove retx check in RAN-SA-Multi-Antenna-CN5G and RAN-SA-AERIAL-CN5G -
to avoid false CI failure caused by unsuccessful retx check of
interfering UE
- adjust RAN-SA-Multi-Antenna-CN5G and RAN-SA-AERIAL-CN5G configs to
improve UL throughput
Manual testing showed that lowering the RX gain reduces UL
retransmissions and improves overall UL throughput in the 100 MHz 2x2
test case of the SA-Multi-Antenna CN5G pipeline.
Add vvdn-activate-carriers.sh to verify RU PTP synchronization and
configuration. Activates carriers on VVDN RU by editing sysrepo running
datastore (INACTIVE->ACTIVE).
Add vvdn-inactive-carriers.sh to reverse the operation, setting all
carriers back to INACTIVE via sysrepocfg.
After the changes introduced in !3991, multiple PRACH PDUs can be
pushed from L2 to L1 before being processed. This leads to the PRACH
queues filling up and triggering "PRACH occ queue is full" issues on
the gNB.
This commit increases the queue size from 8 to 16, providing additional
buffering and preventing queue overflows as reported in #1072.
ZMQ radio
This is a zmq radio implementation that attempts to integrate NR UE with
the ocudu project.
OAI integration status:
This can currently be used to connect OAI gnb and OAI UE.
Compilation:
cmake --build . --target nr-softmodem nr-uesoftmodem ldpc params_libconfig zmq_radio
Running
- gNB command:
sudo ./nr-softmodem -O ../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --device.name zmq_radio --zmq.[0].tx_channels tcp://127.0.0.1:4556 --zmq.[0].rx_channels tcp://127.0.0.1:4557
- UE command:
sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --ssb 516 --device.name zmq_radio --zmq.[0].tx_channels tcp://127.0.0.1:4557 --zmq.[0].rx_channels tcp://127.0.0.1:4556
A new CI testcase for 2x2 configuration was added.
OCUDU integration status:
The OAI NR UE enters RRC Connected state.
For more details, please refer to the description of MR !3975.
T-Tracer & Data Recording v1.1: UL PHY trace modularization and recording
enhancements
Based on the plan with @schmidtr and @roux-cedric, we agreed to enhance
the data recording in two phases:
- Phase 1: Update Data Recording framework to get All internal Massive
Updates and enhancements through the whole framework public
- Phase2: Restructure T-Tracer Apps and remove all Mems in gNB and UE
Softmodems to Get data on T-tarcer Apps for all activated Messages
symbol-by-symbol, and related Meta-data, then do the aggregation on
the T-tracer App. So, there is No Memory Creation at all on the 5G NR
Stack.
This Merge Request is for Phase 1. We address the comments given in: !3632
Summary: Refactor T-Tracer instrumentation for UL PHY data capture and
improve the data recording application (v1.0 → v1.1). This MR extracts
inline T() macro calls into modular wrapper functions, adds Unix timestamp
fields to trace messages, implements a 4-state shared memory protocol for
gNB/UE tracers, and delivers an improved synchronized recording architecture
in Python.
Changes:
- T-Tracer: Modular UL PHY trace wrappers
- Add T_messages_creator.c/.h with 7 wrapper functions (log_ul_fd_dmrs,
log_ul_fd_chan_est_dmrs_pos, log_ul_fd_pusch_iq,
log_ul_fd_chan_est_dmrs_interpl, log_ul_payload_rx_bits,
log_ul_payload_tx_bits, log_ul_scrambled_tx_bits) and a static
log_ul_common() helper
- Register T_messages_creator.c in the T library CMake build
- Update T_messages.txt definitions: Remove string timestamps and get
time stamp directly from sending_time of T-macro.
- PHY: Replace inline T() calls with wrappers
- gNB (nr_ulsch_demodulation.c, nr_ul_channel_estimation.c,
phy_procedures_nr_gNB.c): replace inline T() calls with
T_messages_creator wrappers
- UE (nr_ulsch_coding.c, nr_ulsch_ue.c): replace inline T() calls with
log_ul_payload_tx_bits and log_ul_scrambled_tx_bits wrappers
- Remove deprecated log_tools.c/.h and its CMake reference
- T-Tracer gNB & UE apps: Enhancements
- Implement 4-state shared memory protocol (WAIT → CONFIG → RECORD → STOP)
for coordination with the data recording app
- Add event_trace_msg_ul_data struct with 27 UL metadata fields
- Refactor event loop to poll()-based with proper signal handling
- Separate project IDs (gNB=2335, UE=2336) and ftok paths for independent
shared memory segments
- Update shared memory sizing: Limit number of records to
NUM_MESSAGES_PER_SLOT=5, 100 slots
- Data Recording App v1.1
- Improved architecture with thread pool and barrier synchronization
- Frame/slot-based message grouping with per-slot validation
- atexit/signal-based cleanup for graceful shared memory detach
- Delete legacy data_recording_app_v1.0.py
- Library improvements
- config_interface.py: remove legacy YAML config reader, streamline to
JSON-only
- shared_memory_interface.py: new module for shared memory
attach/read/protocol
- wireless_parameters_mapper.py: new module for NR parameter mapping
- data_recording_messages_def.py: updated message definitions for
27-field struct
- sigmf_interface.py, sync_service.py, common_utils.py: remove unused
imports and dead code
- Documentation
- Update data_recording.md for v1.1 architecture and usage
Arguments for removing:
1. There are no resources to maintain it.
Including no machine with the board.
2. There is no clue that someone is actually using it.
3. AAL is privileged for LDPC offload to a hardware accelerator.
7.2 FHI with XRAN K release
Purpose:
Implement the O-RAN 7.2 Fronthaul interface using O-RAN Software Community's
XRAN release K. The new features of the release K can be leveraged and it is
compatible with DPDK version 24.11.4.
For more details please refer to the MR !3444 description.
- refactor timestamp handling
- Replace string-based SENDING_TIME with integer SEC/NSEC fields.
- Designed the shared memory protocol with a 4-state machine (STATE_WAIT=0, STATE_CONFIG=1, STATE_RECORD=2, STATE_STOP=3) for command/control between the recording app and the T-Tracer service
- Implemented two shared memory segments: one for reading commands (addr_rd) and one for writing captured data (addr_wr)
- Created event_trace_msg_ul_data struct mapping all 27 UL metadata fields (frame, slot, datetime, MCS, DMRS parameters, etc.) by name from the T-Tracer database
- Implemented setup_trace_msg_ul_data() using the G() macro to map field names to indices at startup
- Wrote the main event loop using poll() to avoid busy-waiting, with get_event() to receive T-Tracer events from the softmodem socket
Use log_ul_fd_dmrs, log_ul_fd_pusch_iq, log_ul_fd_chan_est_dmrs_pos,
log_ul_fd_chan_est_dmrs_interpl, log_ul_payload_rx_bits.
Remove redundant T_ACTIVE() guards and old timestamp formatting.
ctest: fix tests when compiling with sanitizers, ignore build directories,
fix spsc_q build
- Fix the directory to the current build directory to enable running with
sanitizers with ctest
- add build* to .gitignore to close#1074
- fix spsc_q compilation on non-C++23 compilers to close#1073
This commit was tested with MicroAmp FR2 with 2x2 MIMO,
where PRACH Rx antennas used is 1.
OAI L1 sets the number of PRACH antennas to be the same as for PUSCH.
Ideally, this should be properly fixed. In the meantime, I modified the
logging to debug to reduce noise.
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
First process PUSCH and then PRACH because the PUSCH callback
is called before PRACH callback.
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
* rename read_prach_data() to xran_rx_prach_read_slot()
* in F release, there is no PRACH queue so `frame` and `slot` are
passed as input; in K release, `frame` and `slot` are taken from the PRACH
queue
Note: since the PUSCH callback is the called before PRACH callback, this
commit is correct but the timing for PRACH processing is just a little
bit late. In previous state, PRACH processing was done inside the
function of PUSCH processing.
=> next commit will just reverse the order.
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
* Move PRACH callback in the oaioran.h/c since now used in K release.
* Reset the number of PRACH packets.
* Handle PRACH queue in the same manner as for PUSCH (95c8fa46).
Co-authored-by: Romain Beurdouche <romain.beurdouche@eurecom.fr>
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
K releases added RX error counters
This commits adds a printing of these counters with LOG_I
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
* Initialize leak detector
* Fill IO config field holding the number of mbufs to be allocated
* Allocate and fill `activeMUs` in the FH config
* Start timing source, worker thread and activate CCs upon starting the FH
* Fill `mu_number[0]` in FH config
* Invert trx_oran end and stop
* Set `neAxcUl`
* Delete duplicated oran_eth_state_t struct definition
* gxran_handle is an array which length is equal to the number of RUs
* Fill BBDev VF token in fh_init
Co-authored-by: Romain Beurdouche <romain.beurdouche@eurecom.fr>
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
stdatomic.h is a C++23 feature [1]. Thus, "older" compilers such as
gcc-11 (default in Ubuntu 22) do not know this, and can therefore not
correctly compile spsc_q. Fix this by alternatively including atomic for
C++.
Fixes errors such as
stdatomic.h:40:9: error: ‘_Atomic’ does not name a type
[1] https://en.cppreference.com/cpp/header/stdatomic.h
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
When compiling with sanitizers that require LD_LIBRARY_PATH (see
documentation), ctest could not drive tests as the executables did not
find shared objects. Fix the directory to the current build directory to
enable running with sanitizers.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
L1 gNB type0 PDSCH
PDSCH type0 allows frequency allocation via PRB bitmap (type1 is via
start and number of PRBs) allowing for non contiguous allocation in
frequency domain
Adapt the oran_fhlib_5g code to compile with xran K release.
Like previously E and F, uses preprocessor directives to separate codes for different xran releases.
Notes:
1. Release K of the FHI library supports many numerologies on one instance.
As of now the integration supports only one numerology.
2. Several arrays in the xran interface are indexed by the numerology.
It was ambiguous whether they were indexed by the actual numerology number or by the index of the relevant numerology within the numerology array.
They are actually indexed by the numerology number so that when one is using only numerlogy 1 for example, he should only use perMu[1], fftSize[1], ...
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
* create the xran forked repo as a cmake external project - easier to maintain and track the changes
we applied to the original repo
* add xran_DOWNLOAD option - clones and builds latest supported K release
* update the FHI README for K release
Signed-off-by: Teodora Vladić <teodora.vladic@openairinterface.org>
asn1c inside local tree
when /opt/asn1c/bin/asn1c does not exist, we download and use the right
asn1c version locally in the build tree. This simplifies dependancies
management
fix (RRC): do not trigger N2 HO when no active PDU sessions are present
Prevent triggering N2 handover when the UE has no active PDU session by
adding an early check in nr_rrc_trigger_n2_ho(), so we avoid building an
invalid HO Required. This aligns with 3GPP TS 38.413 (§9.2.3.1), where
HANDOVER REQUIRED carries a PDU Session Resource List with at least one
PDU Session Resource Item (range 1..maxnoofPDUSessions).
Relates to #1062 (closed)
Fix CSI-RS estimation
Changed channel estimates buffer to store RB 0 from start of buffer instead
of FFT shift offset. This simplifies channel estimation implementation. There
is also no need to add padding because each symbol/antenna start from offset
0 and/or OFDM symbol size always 32 byte aligned.
This also fixes buffer overflow detected when running UE with OCUDU gNB.
Changed channel estimates buffer to store RB 0 from start of buffer instead of
FFT shift offset. This simplifies channel estimation implementation. There is
also no need to add padding because each symbol/antenna start from offset 0
and/or OFDM symbol size always 32 byte aligned.
This also fixes buffer overflow detected when running UE with OCUDU gNB.
Make sure the radio libs are stopped before `end()` call. This allows
for a cleaner exit under most circumstances. Some libraries like zmq_radio
don't exit cleanly without it.
This commit introduces ZMQ-based radio library. Each pair of RX/TX antennas is
represented by a ZMQ REQ/REP socket pair which streams continuous IQ samples
from radio start until stop.
Usage:
Simplest configuration is to connect OAI NR UE to OAI GNB with the same number
of antennas - by inverting the RX and TX channels in ZMQ radio configuration the
gNBs TX is mapped to UEs RX antennas and vice versa.
Minor fixes/cleanup in NGAP lib
This MR is about a small NGAP-focused cleanup, mainly to reduce clang
warnings and remove dead code.
- Handle unused input parameters in ngap_gNB.c and ngap_gNB_handlers.c.
- Fix clang warning in common/utils/time_meas.h (extra semicolon).
- Removes unused NGAP trace/overload code and related references
(ngap_gNB_trace, ngap_gNB_overload).
Minor fixes to gNB/UE behavior in RFsim
While testing with RFsim thw following issues where found:
- gNB config: wrong PCI was printed during F1 Setup Request preparation
- UE PHY: missing rxdata allocation was causing a crash during intra-freq
measurements
Prevent triggering N2 handover when the UE has no active PDU session
by adding an early check in nr_rrc_trigger_n2_ho(), so we avoid building
an invalid HO Required. This aligns with 3GPP TS 38.413 (§9.2.3.1), where
HANDOVER REQUIRED carries a PDU Session Resource List with at least one
PDU Session Resource Item (range 1..maxnoofPDUSessions).
Retx check frequently fails in OTA pipelines, particularly for interfering
UEs attempting to connect to the cell. This leads to job failures in OTA
pipelines.
Remove the retx check from Multi-Antenna and Aerial pipelines to improve
CI stability and avoid false failures. In these pipelines, iperf test
already validates correct funtionality, making the retx check redundant.
Integration `2026.w16`
* !4040 fix: issue 911 - replace timer oneshot to periodic.
* !4041 Compilation without T: move to physims
* !4046 fix(record_db doc): correct the path for T_messages.txt and mention use of ninja/make
* !3994 Update CN5G images to release v2.2.0 and update traffic generator image
* !4024 Fix fill_srs_channel_matrix
* !3983 Add SIB 3,4 support, configurable SIB2 and refactor CU/DU SIB management
* !4030 Miscellaneous code improvements
* !4039 Verify consistency of CSI report in L2 instead of RRC
* !3991 L1 RX: use queues instead of arrays and linear search for PUCCH, PUSCH, SRS, PRACH
* !4011 CI: remove cppcheck, cleanup in build and license checks
* !4051 Fix EMA cold-start for noise and SNR/RSSI measurements
Closes#1063
See merge request oai/openairinterface5g!4048
Fix EMA cold-start for noise and SNR/RSSI measurements
Initialize n0_subband_power and power control avg_snr/avg_rssi directly
from the first measurement instead of starting from zero.
Starting from zero causes the EMA to converge slowly, leading to
underestimated noise power at gNB startup. This results in inflated SNR
estimates, which triggers UE uplink power ramp-up, antenna saturation,
and a positive feedback loop of increasing noise.
CI: remove cppcheck, cleanup in build and license checks
Remove cppcheck. For those who want to use it, it's now in tools/cppcheck/,
and likely easier to use locally.
Clean up some code for CI build and license check. Remove global variable.
We don't enforce cppcheck through the CI, although it's there since
years. It runs on Ubuntu 18/20, so it's old. For folks, it's likely not
discoverable on how to run it locally. Let's make a fresh start.
This removes cppcheck from all CI-related code. Instead, it adds it
under tools/cppcheck/, including documentation on how to run it locally,
bare-matel or in docker.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Fix a UE crash in the neighbor-measurement task setup by allocating the per-antenna
rxdata pointer array before indexing it in pbch_processing(), and freeing it in
nr_ue_meas_neighboring_cell() after measurements complete.
The crash is triggered by intra-frequency neighbor measurements.
L1 RX: use queues instead of arrays and linear search for PUCCH, PUSCH, SRS, PRACH
This MR is an attempt to reduce the time L1 RX searches in array for the
next job to process, and instead use a queue. This queue is a FIFO,
because the various jobs (FAPI messages) to process come in order, and
need to be processed in order. The MR (hopefully, to be measured)
reduces the amount of time spent searching for the next UE (because the
next job is always at the beginning of the queue), and should scale
better for many UEs.
It does the following:
- introduce two helper libraries for (1) Frame.Slot calculation (sfn_t),
already introduced in !3521 (merged) commit 3102068e, and (2) a ring
buffer with fixed size
- use sfn_t and ring buffer (gNB->pucch_queue) to remove the linear
array for PUCCH (gNB->pucch)
- use sfn_t and ring buffer (gNB->pusch_queue) for some PUSCH lookups.
Because we need to still store PUSCH contexts, gNB->pusch is still
there
- use sfn_t and ring buffer (gNB->srs_queue) to remove the linear array
for SRS (gNB->srs)
- use sfn_t and ring buffers (gNB->prach_ru_queue and
gNB->prach_l1rx_queue) to remove the linear array for PRACH
(gNB->prach_list)
- some minor cleanups, e.g., additional loops over the PUSCH array,
using const, using pointers instead of indices, etc
Miscellaneous code improvements
- A fix in a yaml config file as reported by @Abdo-Gaber
- proper positioning of static functions in a couple of gNB scheduler
files
- some effort to split NR from LTE code in compilation
- harmonization of macros for unused variables
Add SIB 3,4 support, configurable SIB2 and refactor CU/DU SIB management
This MR makes neighbour and inter-frequency configuration drive how
SIB2/SIB3/SIB4 are built and sent from CU to DUs. It standardizes SIB
payloads as byte_array_t with typed SIB IDs across RRC, F1AP and MAC,
reducing ad‑hoc buffer handling. Neighbour parsing, validation and
lookup are tightened.
Changes
- Minor refactor to gNB neighbour parsing and storage (shared PLMN
extraction, safer allocation, etc).
- Represent SIB containers uniformly as byte_array_t plus nr_sib_type_t,
and adapt F1AP, MAC and RRC users to the new container API.
- Make SIB2 cell-reselection information fully config-driven with
explicit bounds checking and SIB2 ASN.1 building from that config.
- Generate SIB3 intra-frequency neighbours from the per-cell neighbour
list and propagate them from CU to DU over F1, with MAC
decoding/attaching them to SystemInformation.
- Generate SIB4 inter-frequency neighbours from a new frequency_list
plus neighbour SIB3/SIB4 offsets, and propagate them from CU to DU
over F1, with MAC decoding/attaching them.
- Add basic ASN.1 round-trip tests for SIB2/SIB3/SIB4 and SIB4 range
checks, and update RRC docs to describe the neighbour/inter-frequency
configuration model.
Testing:
1. in gNB conf file:
cu_sibs = (2, 3, 4);
2. Update neighbour config file with SIB3/SIB4 conf:
(see documentation)
3. run gNB and UE as usual
---
Logs & configs: see MR on Gitlab
Use two queues for PRACH processing:
- prach_ru_queue: pass jobs from TX thread (scheduler) to RU thread. For
split 8, the RU thread itself handles PRACH processing; for split 7.2,
it is the library that is responsible for handling PRACH messages (see
oran_fh_if4p5_south_in())
- prach_l1rx_queue: after jobs have been handled in RU thread, use this
queue to pass jobs to the RX thread. There, preamble detection is
performed, and RACH.indication FAPI messages are filled if a preamble
has been detected.
Together, these queues replace a linear search in a global array that
has been modified by three threads at the same time. The design ensures
that access now is thread-safe, and with less overhead.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Expand RRC usage and handover documentation to describe the two-level
neighbour configuration layout, lookup-key semantics,
and config-time SIB4 grouping behaviour. Expand the example config
to include a `frequency_list` block and per-neighbour SIB3/SIB4
offset fields. Add SIB2 config example.
Update handover-tutorial.md to describe the same nested model and
note that F1 and N2 handover share the same serving-cell keyed
mapping.
Add documentation about SIB3/SIB4 and MeasGaps implementation
in OAI with stress on the shared neighbour configuration data model.
Update FEATURE_SET.
Use the spsc queue to pass jobs from TX thread (scheduler) to RX thread
(handling those jobs), reducing the amount spent searching for SRS jobs,
clarifying the design, and making it thread-safe.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
The structure in which was snr will be a "SRS job" in a follow-up
commit, so the snr parameter cannot be stored in there (and it is also
not necessary to do so, as it can be local to the function handling
nr_srs_rx_procedures()).
Correctly read SRS SNR through FAPI message in nr_ulsim. Switch to SRS
BEAMMANAGEMENT as only this message returns the actual SNR (unlike
CODEBOOK). Add asserts to check what is returned is valid data in the
sense of the test.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Remove useless logging defines. Move srs_estimated_channel_time to where
it is used. Prepare for the next commit by moving UL_INFO to earlier
inside phy_procedures_gNB_uespec_RX().
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
- calculation in float: should be enough precision (it'll go into 16bit
ints later...)
- avoid round: the lower 15bits will be shifted away, the rounding will
have no effect
- group some multiplications to avoid re-computation of the same
results.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
This means that as of this commit, the signal has to be permanently
regenerated. In fact, with the SRS queue to be introduced in a follow-up
commit, we don't have an easy way to cache the sequence generation, as
there is no "index" to which we could refer to (hence, caching would be
tricky).
Instead, the next commits further refactor this to reduce the time for
SRS sequence generation as well as the memory footprint.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Use the spsc queue to pass jobs from TX thread (scheduler) to RX thread
(handling those jobs), reducing the amount spent searching for PUSCH
jobs, clarifying the design, and making it thread-safe.
Since the PUSCH contexts have to be stored somewhere, there is still a
single iteration over all contexts. Removing that is left for future
work. Thus, this commit (together with previous commits) reduces the
number of iterations over all PUSCH entries, only iterating over the
actually requested PUSCH jobs. On the other hand, because only the RX
thread iterates over PUSCH contexts, it should be thread-safe.
Remove flag "handled", which is always 0.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Pass pointers directly instead of ULSCH_id. Put const where possible and
applicable.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Set the FAPI message in nr_ulschsim correctly in line with what
nr_ulsch_procedures() expected. Add an AssertFatal() to verify that the
assumed length of DMRS in the simulator and what is actually set in the
FAPI message matches. Finally, the internal nr_get_G() code (looping
over all PUSCH) does not double the DMRS because Nl == 3 || Nl == 4, so
harmonize in the simulator.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
It is pointless to iterate ulsch_to_decode to find the number of jobs if
we can simply pass it to the function.
Use an additional {} block to limit the amount of indentation.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Amidst all these unnecessary pointers, the pointer on
pusch_vars->ptrs_symbols is necessary to reset the PTRS number of
symbols. For clarity, remove this pointer and use
pusch_vars->ptrs_symbols directly.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Pass pointer to data. This necessitates to move delay from
NR_gNB_ULSCH_t (ULSCH data, including transport channels etc) to
NR_gNB_PUSCH (lower-PHY PUSCH data):
1. This allows to pass a single pointer to nr_pusch_channel_estimation()
2. To me, delay estimation seems to be a lower-PHY calculation, so it
fits better anyway.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Use the spsc queue to pass jobs from TX thread (scheduler) to RX thread
(handling those jobs), reducing the amount spent searching for PUCCH
jobs in an array, clarifying the design, and making it thread-safe.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Because it is SPSC, atomic variables are enough to synchronize the two
threads. Concretely put() is modified to ensure that read_idx is
"acquired" so that the read index has been written, including memory, by
the other thread. "Release" ensures that the write operation (including
the memory to the buffer) is written before it is visible to the other
thread in get() (which in turn "acquires" it). For more information, see
also [1].
The rest of the library has been simplified to work only with put() and
get(), reducing total code and the surface for possible bugs.
This (and the previous) version has been tested with the
threadSanitizer:
TSAN_OPTIONS=halt_on_error=1 ./common/utils/ds/tests/test_spsc_q_perf
On my machine, using Google Benchmark, I measure a considerable 5x speed
improvement:
$ /tmp/benchmark/tools/compare.py benchmarks pthread.json atomic.json
Comparing pthread.json to atomic.json
Benchmark Time CPU Time Old Time New CPU Old CPU New
--------------------------------------------------------------------------------------------------------------
BM_spsc_q/10 -0.8201 -0.0740 266779912 47989020 52387 48512
BM_spsc_q/16 -0.8301 -0.0520 249656592 42428540 51462 48784
BM_spsc_q/32 -0.8003 -0.0841 230248798 45972155 53841 49311
BM_spsc_q/64 -0.7995 -0.0506 210429791 42199674 50690 48124
BM_spsc_q/128 -0.7930 -0.1101 205212273 42483155 52745 46936
BM_spsc_q/160 -0.7880 -0.1663 216644738 45938247 53400 44518
OVERALL_GEOMEAN -0.8057 -0.0904 0 0 0 0
[1] https://en.cppreference.com/w/c/atomic/memory_order.html
Assisted-By: Claude:claude-sonnet-4-6
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Fix fill_srs_channel_matrix
Fix incorrect SRS subcarrier mapping in fill_srs_channel_matrix
The previous implementation of fill_srs_channel_matrix assumed an incorrect
SRS subcarrier mapping, leading to wrong indexing of the estimated channel
in frequency domain.
Update CN5G images to release v2.2.1 and update traffic generator image
- Updated all CN5G image tags to v2.2.1
- Updated image oaisoftwarealliance/trf-gen-cn5g to latest tag supporting
multi-architecture platforms See here
- Enabled iperf3 server in daemon mode in oai-ext-dn
- Handover: Since MR oai/cn5g/oai-cn5g-amf!372 has been merged, the AMF
image tag is updated to the latest release v2.2.1
- upgrade MySQL image to 9.6
This data structure is designed to support the use cases of the L1,
i.e., provide a queue which can be quickly used to order L1 jobs in FIFO
order with simple iteration of jobs to treat. It is a Single-Consumer
Single-Producer queue library.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
phy_procedures_nr_gNB.c calls pack_srs() functions to pack individual
SRS "subPDUs". Correspondingly, the library depends on NFAPI_LIB. In
nr_ulsim, in a later commit, we will need to unpack the SRS.indication,
so remove dummy functions and implement correctly.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
fix(record_db doc): correct the path for T_messages.txt and mention use of ninja/make
The commit !4038 (51d84419) provided the wrong path for T_messages.txt. The path
it provided holds if the T tracer is built manually using make.
A note to explicitly mention the path for T_messages.txt when T tracer is built
using make.
Signed-off-by: Sagar Arora sagar.arora@openairinterface.org
fix: issue 911 - replace timer oneshot to periodic.
Updated SCTP reconnect timer from TIMER_ONE_SHOT to TIMER_PERIODIC so gNB
continuously retries AMF lookup every 30 seconds after disconnect.
Timer is now removed only when ngap_amf_associated_nb > 0, AMF association
is actually back.
Updated SCTP reconnect timer from TIMER_ONE_SHOT to
TIMER_PERIODIC so gNB continuously retries AMF lookup every
30 seconds after disconnect.
Timer is now removed only when ngap_amf_associated_nb > 0,
AMF association is actually back.
at RRC we don't store CSI-MeasConfig information so in some scenarios (see #1063) we may not have the full pictures to understand if what RRC received is a valid configuration
we verify at L2 instead after updating CSI-MeasConfig and if it fails we send a message to RRC
Update the shared neighbour config used by the F1 rfsim pipeline to
enable CU-provided SIB2 and neighbour-derived SIB3/SIB4 inputs.
In `ci-scripts/conf_files/gnb-cu.sa.band78.106prb.conf`
- Add `cu_sibs = (2, 3, 4)
In `ci-scripts/conf_files/neighbour-config.conf`:
- Add a complete `sib2_config` block
- Add `frequency_list` / `frequency_config` for inter-frequency SIB4 fields
- Extend both neighbour entries with per-cell offsets
Add encode/decode helpers and basic round-trip tests for NR SIB2, SIB3
and SIB4 in test_asn1_msg.cpp to ensure we produce decodable messages
with expected fields. Extend SIB4 coverage with an
inter_freq_carrier_freq_info_ranges test that exercises boundary and
out-of-range values for carrier reselection parameters and checks
encoder failures for invalid configurations.
Changes:
- Introduce encode_and_decode_sib2, encode_and_decode_sib3 and
encode_and_decode_sib4 helpers that call do_SIB2_NR, do_SIB3_NR,
do_SIB4_NR and uper_decode and assert non-empty, non-null byte
arrays and successful decoding.
- Add sib2_basic_encode_decode, sib3_basic_encode_decode and
sib4_basic_encode_decode tests that populate minimal but
representative NR_SIB2_t, NR_SIB3_t and NR_SIB4_t instances and
verify selected decoded fields match the originals.
- Add inter_freq_carrier_freq_info_ranges test that builds an NR_SIB4_t
with NR_InterFreqCarrierFreqInfo_t and varies different offsets and
thresholds to confirm valid combinations encode and invalid ones
are rejected.
- Add comprehensive documentation header explaining the structure's role
as single source of truth for neighbor cell information across multiple
protocols (NGAP/XnAP handover, measurement config, DU validation, SIB3/SIB4)
- Add detailed field comments documenting protocol-specific mappings:
* Core identification fields (gNB_ID, nrcell_id, physicalCellId)
* Frequency/RF parameters (absoluteFrequencySSB, subcarrierSpacing, band)
* Handover target identification (plmn, tac)
- Document NGAP/XnAP IE mappings for plmn and tac fields
Remove the isIntraFrequencyNeighbour field and all code that sets or
uses it, simplifying neighbour cell handling and avoiding redundant
state in the RRC gNB code. The flag duplicated information that can be
derived from the neighbour absoluteFrequencySSB and the serving cell
SSB ARFCN, and intra-frequency neighbours are logged in the SIB3
preparation flow.
Changes:
- Remove isIntraFrequencyNeighbour from nr_neighbour_cell_t in
openair2/RRC/NR/nr_rrc_defs.h
- Delete is_intra_frequency_neighbour() and
label_intra_frequency_neighbours() helpers from
openair2/RRC/NR/rrc_gNB_du.c
- Remove calls to label_intra_frequency_neighbours() from
rrc_gNB_process_f1_setup_req() and
rrc_gNB_process_f1_du_configuration_update() in rrc_gNB_du.c
- Stop setting .isIntraFrequencyNeighbour in the local
nr_neighbour_cell_t neighbourConfig initializer in
openair2/RRC/NR/rrc_gNB_mobility.c
Add SIB4 encode/decode helpers and populate SIB4 from configured
inter-frequency carriers and neighbour cells, wiring it into DU F1
Setup handling and MAC SystemInformation.
Changes:
- Add do_SIB4_NR() and NR_SIB4.h inclusion in asn1_msg.c/asn1_msg.h to
UPER-encode NR_SIB4_t into a byte_array_t.
- Extend nr_mac_configure_other_sib() in NR_MAC_gNB/config.c with an
NR_SIB_4 case that validates the SIB container, decodes NR_SIB4_t via
uper_decode, logs failures, and appends SIB4 to SystemInformation.
- Introduce build_inter_freq_carrier_from_cfg() and
get_sib4_inter_freq_neighbors() in rrc_gNB_du.c to build
NR_InterFreqCarrierFreqInfo_t and NR_SIB4_t from inter-frequency and
neighbour cell configuration, skipping invalid or empty carriers.
- Handle NR_SIB_4 in rrc_gNB_process_f1_setup_req() by deriving SIB4
from neighbour/inter-frequency configuration, encoding it with
do_SIB4_NR(), validating the resulting byte_array_t and adding the SI
message for the DU cell when encoding succeeds.
Introduce NR SIB3 encoding in RRC and wire SIB3 neighbour information
into CU–DU F1 Setup and DU SystemInformation. Extend MAC to decode NR
SIB3 from CU-provided SIB containers and attach the decoded SIB3 to the
DU SystemInformation structure.
Changes:
- Add NR_SIB3 ASN.1 include and a do_SIB3_NR() encoder in asn1_msg
so SIB3 can be serialized into a byte_array_t buffer.
- Introduce get_q_offset_asn1() and get_sib3_intra_freq_neighbors() in
rrc_gNB_du.c to build an intra-frequency neighbour cell list for SIB3,
mapping q_OffsetCell dB values to NR_Q_OffsetRange and optionally
filling q_RxLevMinOffsetCell and q_QualMinOffsetCell.
- Limit the number of intra-frequency neighbours in SIB3 to
NR_maxCellIntra, logging a warning and skipping additional cells when
the limit is reached.
- Hook SIB3 construction and encoding into rrc_gNB_process_f1_setup_req()
so SIB type 3 entries are added to the F1 Setup Response when
neighbour configuration and matching neighbours are available.
- Handle NR_SIB_3 in nr_mac_configure_other_sib() by validating the CU
SIB3 container buffer, decoding it with uper_decode into an NR_SIB3_t,
and attaching the resulting SIB3 to the MAC SystemInformation via
add_sib_to_systeminformation().
Introduce typed SIB3/SIB4 neighbour and inter-frequency carrier
configuration structures, wire them into the RRC neighbour and gNB
instances, and centralise parsing and bounds checking of per-frequency
SIB4 parameters from the gNB frequency list.
Changes:
- Define SIB3/SIB4 reselection and offset bound macros in gnb_config.c
and apply them when parsing SIB4 frequency_config and
per-carrier q_RxLevMin/t_ReselectionNR.
- Add add_inter_freq and parse_inter_freq_list helpers in gnb_config.c
to populate a shared inter_freqs seq_arr_t from gNB_CONFIG_STRING_GNB_LIST
frequency_list entries, enforcing unique (ARFCN,SCS) combinations and
logging duplicates.
- Extend neighbour cell parameters in gnb_paramdef.h with SIB3 per-
neighbour offset fields and define frequency_list/frequency_config
option names, descriptor tables, and index constants for SIB4 inter-
frequency configuration.
- Introduce nr_neighbour_cell_neighbor_offset_t, nr_neighbour_cell_sib3_t,
nr_neighbour_cell_sib4_freq_t, nr_neighbour_cell_sib4_t, and
nr_inter_freq_cfg_t in nr_rrc_defs.h, and extend nr_neighbour_cell_t
and gNB_RRC_INST with sib3/sib4 and inter_freqs members respectively.
- udpated fill_neighbour_cell_configuration to use GET_PARAMS_LIST
with params bound check
Introduce a typed SIB2 cell reselection configuration, load it from the
gNB configuration into the RRC gNB instance, and use it to build and
encode SIB2 instead of relying on a fixed SIB2 definition.
Validate SIB2 parameters against explicit bounds and make the SIB2
encoder consume a pre-built ASN.1 structure with safer error handling.
Changes:
- Add SIB2 mobility timer and q-HystSF enums plus SIB2 config structs
(`sib2_speed_state_reselection_pars_t`, `sib2_config_t`) and a
`sib2_config` field on `gNB_RRC_INST` in `nr_rrc_defs.h`.
- Define SIB2 configuration option names, defaults
(`GNB_CONFIG_STRING_SIB2_*`, `GNBSIB2PARAMS_DESC`)
in `gnb_paramdef.h` for q_Hyst, thresholds, mobility timers, scaling
factors and deriveSSB_IndexFromCell.
- Add `sib2_config` parameter keys, defaults, and range/value checks in
`gnb_paramdef.h` (`GNBSIB2PARAMS_DESC`).
- Add SIB2 `fill_sib2_configuration()` in `gnb_config.c` to read SIB2
parameters from the config file log the resulting configuration and
store it in `rrc->sib2_config` via `RCconfig_NRRRC()`.
- Add `get_q_hyst_asn1()` and `get_sib2_from_cfg()` in `rrc_gNB_du.c`, and
update `rrc_gNB_process_f1_setup_req()` to encode/add SIB2 from config with
explicit encode-failure handling and logging.
- Change `do_SIB2_NR` signature in `asn1_msg.h/.c` to
`byte_array_t do_SIB2_NR(const NR_SIB2_t *sib2)`, remove internal default
SIB2 construction, and add ASN.1 constraint/encode error logging.
Unify SIB container handling by introducing a typed SIB enum and storing
SIB payloads as byte_array_t across common NR types, F1AP helpers, MAC,
and RRC DU setup code.
Changes:
- Include byte_array support in nr_common.h, add nr_sib_type_t (NR_SIB_1–NR_SIB_21),
and change nr_SIBs_t to hold only nr_sib_type_t SIB_type.
- Switch f1ap_sib_msg_t in f1ap_messages_types.h to use a byte_array_t SI_container
instead of raw pointer and length fields.
- Update F1AP encode/decode, equality, copy, and free helpers in
f1ap_interface_management.c to work on SI_container.buf / SI_container.len and
use eq_byte_array, copy_byte_array, and free_byte_array.
- Adapt F1AP tests in f1ap_lib_test.c to build and inspect SIB containers via
SI_container.buf and SI_container.len.
- Replace magic SIB numbers with nr_sib_type_t values in gnb_config.c
(get_sys_info and fill_du_sibs) to validate and configure DU SIBs.
- Rework nr_mac_configure_other_sib in NR_MAC_gNB/config.c to decode SIB2
from a byte_array_t container, fix freeing by releasing the decoded sib2 on
failure, and use NR_SIB_2 / NR_SIB_19 for CU/DU SIB selection.
- Add an add_si_msg helper in rrc_gNB_du.c and refactor the SIB2 branch of
rrc_gNB_process_f1_setup_req to populate cell->SI_msg from encoded local
byte array while iterating SIBs with FOR_EACH_SEQ_ARR.
Tighten neighbour-cell config parsing by enforcing parameter constraints in
the descriptor and switching parsing code to name-based lookups with gpd.
Changes:
- Update `GNBNEIGHBOURCELLPARAMS_DESC` in `openair2/GNB_APP/gnb_paramdef.h`
to add checks for `physical id`, `absoluteFrequencySSB`, `scs`, `band`
`tracking_area_code`.
- Remove neighbour-cell parameter index macros.
- Refactor `parse_neighbour_cells_list` in `openair2/GNB_APP/gnb_config.c`
to use `gpd()` lookups for neighbour fields instead of fixed indexes.
- Extend `parse_neighbour_cells_list` with an `n_cell_params` argument and
update `fill_neighbour_cell_configuration` to pass
`sizeofArray(ncell_params)`.
Inline neighbour cell arrays into the RRC neighbour configuration and
update RRC/DU helpers to use const-aware access and shared iteration
helpers when walking neighbour lists and building measurement configs.
Changes:
- Change neighbour_cells in neighbour_cell_configuration_t from a
seq_arr_t * to an embedded seq_arr_t field.
- Initialize and populate the embedded neighbour_cells directly in
parse_neighbour_cells_list in gnb_config.c, dropping dynamic
allocation of the neighbour list container.
- Refactor get_neighbour_cell_by_pci and nr_rrc_get_measconfig in
rrc_gNB.c to access the embedded neighbour_cells via const pointers,
introduce a local meas_cfg and a3_event_list, and iterate neighbour
cells with FOR_EACH_SEQ_ARR.
- Treat neighbour cell configuration entries as const in rrc_gNB_du.c
(get_cell_neighbour_list, label_intra_frequency_neighbours,
valid_du_in_neighbour_configs) and iterate neighbour lists with
FOR_EACH_SEQ_ARR instead of index-based loops.
Outer gNB neighbour_list entries now only declare the serving cell
nr_cellid. The code resolves that field with gpd instead of a fixed column
index.
Changes:
- gnb_paramdef.h: remove unused NEIGHBOUR_CELL_PHYSICAL_ID from
GNB_NEIGHBOUR_LIST_PARAM_LIST (keep NRCELLID only).
- gnb_config.c: in fill_neighbour_cell_configuration, set nr_cell_id
from gpd
Refactor gNB configuration code to share PLMN extraction logic and to
split neighbour-cell configuration into smaller helpers with safer
allocation and clearer list handling.
Changes:
- Add `extract_plmn_from_params()` in `gnb_config_common.c` and declare
it in `gnb_config_common.h` to centralize PLMN extraction from
`paramdef_t`.
- Update `set_plmn_config()` to use `extract_plmn_from_params()` when
filling the PLMN array instead of duplicating field assignments.
- Refactor `fill_neighbour_cell_configuration()` in `gnb_config.c` to
delegate per-cell neighbour parsing to
`parse_neighbour_cells_list()` and sorting to
`sort_neighbour_configuration()`, simplifying the main loop.
- Use `extract_plmn_from_params()` when parsing neighbour PLMNs in
`parse_neighbour_cells_list()` and log each neighbour with its PLMN,
PCI, and other radio parameters before adding it to the sequence.
- Switch allocation of `rrc->neighbour_cell_configuration` in
`fill_neighbour_cell_configuration()` from `malloc` to
`malloc_or_fail()` to enforce consistent handling of allocation
failures.
Change 1: config_check_intval() now uses the correct integer pointer for TYPE_INT
Problem: config_check_intval() previously dereferenced param->uptr regardless
of param->type. For parameters declared as signed (TYPE_INT / TYPE_INT32), the
active union member is param->iptr, and param->uptr may be NULL -> using uptr
makes validation unsafe and type-inconsistent.
What changed: Updated config_check_intval() behavior (signature unchanged).
Handle both param->type, param->iptr and param->uptr.
Change 1: new config_check_uintrange() for unsigned range constraints
Problem: there was a signed range checker (config_check_intrange()) that reads
param->iptr, but there was no dedicated unsigned range validator using param->uptr.
What changed: added config_check_uintrange() in config_userapi.h/.c
The new function reads param->uptr as uint32_t and validates against
param->chkPptr->s2.okintrange[] endpoints.
Change 3: constify input params for f2 function pointers
Problem: checkedparam_t.s2.f2 was typed with non-const input params, even though
range checks only read. A safer const-safe signature is required.
What changed: s2.f2 now takes const configmodule_interface_t *
and const paramdef_t *. config_check_intrange() and config_check_uintrange() use
the same const-qualified parameters.
Integration `2026.w15`
* !4014 Microamp FR2 configuration file and documentation
* !4029 nr rlc: tolerate bogus data
* !4032 build_oai fixes: harmonize duplicate options, remove wrong --build-lib handling
* !3977 Further unused arguments cleanup
* !4009 Fix for NULL pucch-ResourceCommon at MSG4
* !4037 Increase reliability of ltebox start
* !4034 Prevent infinite loop on Single Entry PHR handling
* !4038 doc(record_db): explain how to use record_db
* fix compilation of T tracers with 'make'
* !3489 Thread-pool support for TX symbol processing.
See merge request oai/openairinterface5g!4033
Thread-pool support for TX symbol processing.
This MR adds thread-pool support for TX symbol processing. It allows modulation
/mapping/layer-precoding to run in parallel and offers a speedup of around 3
compared to single-thread execution. This is particularly important for large
bandwidths and 4 or more TX antenna ports where the precoding operation is quite
computationally-intensive.
Please see the description of !3489 for the performance comparison results and
the nr_dlsim timing measurements.
Extend the performance tuning section of documentation
to include explanation on the `--L1s.L1_num_tx_sym_per_thread` option
and on the AMD EPYC core complex behavior
Increase reliability of ltebox start
The existing ltebox startup sequence on nepes occasionally fails. Running
sudo su -c 'screen -dm -S simulated_hss /opt/hss_sim0609/starthss' \
&& sleep 1 && sudo /opt/ltebox/tools/start_mme && sudo /opt/ltebox/tools/start_xGw \
& sleep 1 && ip a show dev tun1
Reliably shows that no tun1 interface is created, because that takes around
1s itself. Increasing the second sleep to 2 reliably deploys it correctly.
Do the same for sabox and ltebox on nano for consistency.
Fix for NULL pucch-ResourceCommon at MSG4
Field pucch-ResourceCommon, used for ACK of MSG4, in some scenarios was
overwritten by RRCSetup before being used. Storing it in advance prevents
the segfault. In addition there is a clenaup of similar procedures at gNB.
* Add option `--L1s.L1_num_tx_sym_per_thread` for the softmodems and `-Y` for `nr_dlsim`
to provide the number of symbols processed per thread.
It defaults to 0 which makes that every symbols are processed in one thread.
* The last symbol processing task is processed in the L1 TX thread.
When receiving single-entry PHR with HARQ PID -1
(nr_mac_process_mac_pdu() is called with such parameter in at least two
places), the error handling path calls continue skipping the accounting
of the current sub-pdu (pduP and pdu_len). This results in an infinite
loop. Fix by moving functionality into a separate function.
Fixes: 2e0493632d ("RLC data ind: single call for complete TB at gNB")
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Further unused arguments cleanup
More fixes for unused function arguments (see #1057),
add_compile_options(-Wunused-parameter) added in folders:
- nfapi
- openair2
- openair3
- USRP
- rfsimulator
build_oai fixes: harmonize duplicate options, remove wrong --build-lib handling
Correctly handle --build-lib such that missing arguments are still handled
properly. Harmonize, and remove useless code.
The existing ltebox startup sequence on nepes occasionally fails.
Running
sudo su -c 'screen -dm -S simulated_hss /opt/hss_sim0609/starthss' \
&& sleep 1 && sudo /opt/ltebox/tools/start_mme && sudo /opt/ltebox/tools/start_xGw \
& sleep 1 && ip a show dev tun1
Reliably shows that no tun1 interface is created, because that takes
around 1s itself. Increasing the second sleep to 2 reliably deploys it
correctly.
Do the same for sabox and ltebox on nano for consistency.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Functionality existed to print all output of asn1c on error, but the
form
asn1c || cat X
makes the command exit with a 0 exit code (success). Fix by explicitly
returning non-zero exit code in this case:
asn1c || ( cat X && false )
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Both do practically the same. Harmonize them into one while guaranteeing
backwards compatibility.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
This fixes two problem:
1. an omitted --build-lib library could yield strange grep errors. For
instance, calling build_oai --build-lib --cmake-opt OPTION passed
"--cmake-opt" to grep, that does not know this option. Handle by
explicitly separating options and search pattern through --.
2. Even with this fixed, set -e triggered an exit because grep exits
with non-zero error code. Remove set -e to have the error handling
code pass.
With set -e removed, properly check that the build passes.
Update a log line to make it clearer.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
nr rlc: tolerate bogus data
Some unfriendly entity may play with the RLC module and send bogus data to
trigger funky behaviors here and there.
A report sent by Dhanish indentifies one such issue.
From analyzing this report, a possible scenario is the following. Unfriendly
entity sends an RLC PDU with: is_first=0 is_last=0 so=15 lenght of data,
whatever, let's say 1.
This PDU is put in the RX list.
Then later it sends another PDU (for the same SN, obviously), with: is_first=1
is_last=1 so=0 (well, since is_first=1, necessarily so=0; it is not transmitted,
see 38.322 6.2.2.3 for UM and 38.322 6.2.2.4 for AM) length=10, let's say.
This PDU is also put in the RX list, before the previous one.
Then the function sdu_full() returns 1, so reassemble_and_deliver() is called
and the 'while (pdu)' loop is executed for both PDUs. When the second (bogus
one) is processed, so==10 (after processing the first PDU) and the line: int
len = pdu->size - (so - pdu->so) is: int len = 1 - (10 - 15) which is not good.
So we detect the case 'pdu->so > so' and reject the SDU. We could label the
other entity as bogus, since no standard RLC implementation will produce such a
case, but let's remain friendly, even with unfriendly entities. (To be changed
later if needed.)
The problem was reported for RLC AM but is also present in RLC UM. (Not in RLC
TM, where there is no segmentation.) Note: according to the report, this bug was
found using a fuzzer described as 'AI-assisted custom 5G NR protocol fuzzer'. It
had to be said.
* Global timers were started and stopped
in the TX symbol processing tasks
which is not thread safe
* gNBs nrL1_stats.log now shows
PDSCH generation time rather than
layer mapping and precoding times
There was an indexing error in the calculation of the symbol offset `re_beginning_of_symbol`.
The symbol was tested to hold PTRS or DMRS based on the index of the
first symbol processed in the task and not based on the index of the
symbol as it should be.
Then PDSCH generation was not working properly for more than one symbol
per task.
The previous implementation of fill_srs_channel_matrix assumed an incorrect SRS subcarrier mapping, leading to wrong indexing of the estimated channel in frequency domain
CI: Add stage to push to local git repository
This MR includes minor code cleanup and fixes for warnings reported by Jenkins.
It also introduces a new stage in ci-scripts/Jenkinsfile-GitLab-Container that
pushes the branch to a local repository after the merge. In a follow-up MR,
this local repository will be used as the source for cloning the branch,
replacing direct access to GitLab/GitHub.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named JOB_TIMESTAMP (to a value of type String) which could lead to memory leaks or other issues.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named MR_NUMBER (to a value of type String) which could lead to memory leaks or other issues.
Some unfriendly entity may play with the RLC module and send bogus data to
trigger funky behaviors here and there.
A report sent by Dhanish, India, indentifies one such issue.
From analyzing this report, a possible scenario is the following.
Unfriendly entity sends an RLC PDU with:
is_first=0
is_last=0
so=15
lenght of data, whatever, let's say 1.
This PDU is put in the RX list.
Then later it sends another PDU (for the same SN, obviously), with:
is_first=1
is_last=1
so=0 (well, since is_first=1, necessarily so=0; it is not transmitted,
see 38.322 6.2.2.3 for UM and 38.322 6.2.2.4 for AM)
length=10, let's say.
This PDU is also put in the RX list, before the previous one.
Then the function sdu_full() returns 1, so reassemble_and_deliver() is
called and the 'while (pdu)' loop is executed for both PDUs. When the
second (bogus one) is processed, so==10 (after processing the first
PDU) and the line: int len = pdu->size - (so - pdu->so)
is: int len = 1 - (10 - 15)
which is not good.
So we detect the case 'pdu->so > so' and reject the SDU. We could label
the other entity as bogus, since no standard RLC implementation will
produce such a case, but let's remain friendly, even with unfriendly
entities. (To be changed later if needed.)
The problem was reported for RLC AM but is also present in RLC UM.
(Not in RLC TM, where there is no segmentation.)
Note: according to the report, this bug was found using a fuzzer
described as 'AI-assisted custom 5G NR protocol fuzzer'. It had
to be said.
Cleanup common_lib.h
This change reduces the number of dependecies of common_lib.h and simplifies
the task of implementing an external OAI radio library.
Remove a lot of unused code, defines, and config options
Remove unused header files and defines.
Slightly clean up gnb_config.c by removing all _IDX variables. Remove
these unused parameters:
- MACRLCs.[0].num_cc
- MACRLCs.[0].local_n_portc
- MACRLCs.[0].remove_n_portc
- MACRLCs.[0].remote_s_portc
- MACRLCs.[0].remote_s_portd
- L1s.[0].num_cc
- L1s.[0].local_n_portc
Declare `localStatus` and `localResult` as local variables in `triggerSlaveJob`
and `triggerCN5GSlaveJob` functions by adding `def`.
This prevents unintended use of global variables in pipeline and avoids
potential variable leakage or conflicts between stages.
Follows the Jenkins recommendation:
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named localStatus (to a value of type RunWrapper) which could lead to memory leaks or other issues.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named localResult (to a value of type String) which could lead to memory leaks or other issues.
Remove the gNB_MAC_INST.eth_params_s, since it's only purpose is to
store what can be on the stack.
For the Aerial log message, don't print an empty prefix but what is
actually used for Aerial.
- remove test_multipath and test_noise from ChanelSim tests of
RAN-Channel-Simulation pipeline - will be executed together with the
other CUDA-enabled unit tests
- enable configurable dockerfile, runtime-opt, and ctest-opt parameters in
the XML file for the Build_Run_Tests step
- pass runtime options to `docker run` to support ctest execution with CUDA
- allow additional ctest options for selective test execution and labeling
- add benchmark_channel_pipeline to CTest
- add test_channel_pipeline to CTest
- add `cuda` label to CUDA-dependent tests for easier execution and
filtering
This change removes the cudaDevAttrIntegrated check and only requires
pageable memory access. This change allows to run GPU accelerated
channel convolution on GH machines.
The indices are brittle and might be wrong. Instead, use the option name
(via gpd()) to look up config options. This will also simplify the
removal of unused parameters, as we don't have to update all indices.
Remove leading CONFIG_STRING_, as it is just repetitive and adds noise.
The constants are both short(er) and sufficiently self-explanatory
without it.
Update doc: split RUNMODEM.md, clarify USRP-specific workarounds
This reworks the documentation:
- split up RUNMODEM.md into separate documents for gNB, UE, NTN
- explains USRP workaround and patches
- makes a standalone UE doc file that explains UE-specific configuration
& modes
- better explains physical simulators
- adds a document on tracy
- cleanup
It can happen that a message is delayed, but then no UE is found for
such message, e.g., something is delayed but the UE context is deleted
in the meantime:
[02:23:16.320730] [NR_RRC] I [--] (UE ID 3 RNTI d2b1) Remove UE context
Assertion (ue_context_p) failed!
In rrc_delay_transaction() /oai-ran/openair2/RRC/NR/rrc_gNB.c:191
In that case, don't delay the message further -- all handlers gated by
this function will check for the UE context and abort the transaction if
not present.
It can happen that no PDU session can be setup (e.g., PDU session
already setup). Check that there is at least one before triggering the
message.
Also initialize bearer_req.gNB_cu_cp_ue_id early to avoid uninitialized
IDs (e.g., when no PDU session to be setup).
More compilation improvements
Mostly to decouple NR files from LTE headers.
At least in one instance, ulsch_input_buffer_array, using an LTE constant in
NR code was quite dangerous because the buffer in NR could easily be larger
than what the LTE constant foresee.
UE: Fix CSI RS Measurement
1. Fix regression introduced in !3834.
2. ZMQ has no interference or artificial noise so the interference plus noise
measured is always 0. nr_csi_rs_pmi_estimation() returns SINR as 0 if noise
is 0 which reports CQI as 0. This fix computes SINR if noise is 0 instead of
returning.
UE: Implement SUCI Profile Scheme A
This MR modifies the nrUE to support Profile Scheme A based SUCI generation as
outlined in TS 33.501 §C.3 Elliptic Curve Integrated Encryption Scheme (ECIES),
this further extends SUCI generation, which currently only supports the NULL
Scheme.
Changes:
- Extend UICC structure for SUCI parameters.
- Add cryptographic primitives (Curve25519, X9.63 KDF).
- Add an abstracted function to transfer digit strings into their corresponding
BCD value.
- Updates SUCI generation to support Profile Scheme A.
- Updates NAS SUCI encoding to support hexadecimal cryptographic output in
addition to BCD encoded MSINs.
Notes:
When a configuration file specifies an unsupported Profile Scheme, the NAS layer
triggers a fatal error. This occurs either because Profile Scheme B is
unimplemented or the build uses OpenSSL < 3.0, which lacks Curve25519 and X9.63
KDF support, ensuring users are informed of the incompatibility. Support for
Profile Scheme B (TS 33.501 §C.3.4.2 Profile B) can be implemented at a later
stage using P-256-based encryption.
The implementation of SUCI Profile Scheme A was tested against Open5GS’s core
implementation. OpenAirInterface’s cn5G does not yet support Scheme A and should
be extended to include it in a future update.
This allows to compile physical simulators by compiling only tests with
"ninja tests". It fixes a regression.
Fixes: ec8efe1b7e ("Unify physim test definition")
hotfix for 4 layer mapping on aarch64
This hotfix fixes a small bug appearing on aarch64 in the 4-layer PDSCH mapping
function. It was an error in the original implemntation.
Extend UICC configuration parsing to provide: routing_indicator,
protection_scheme, home_network_public_key, and home_network_public_key_id.
Use the protection_scheme value to decide what SUCI Profile Scheme to
apply during SUCI generation. Add support for Profile Scheme A which
provides ECIES-based encryption using Curve25519 and X9.63 KDF as outlined
in TS 33.501 Section C.3.4.1 Profile A.
When a configuration file specifies an unsupported Profile Scheme,
the NAS layer triggers a fatal error. This occurs either because
Profile Scheme B is unimplemented or the build uses OpenSSL < 3.0,
which lacks Curve25519 and X9.63 KDF support, ensuring users are
informed of the incompatibility.
Split out to make a standalone NTN configuratio page that would be
easier to find. I only modify the headings in the new file and write an
introductory sentence of the tutorial, the rest is unchanged.
Integrate channel pipeline library with vrtsim with two acceleration
options chosen at compile time:
- threadpool if CUDA support is disabled
- CUDA otherwise
Added two versions of channel convolution and noise generation:
- accelerated via threadpool
- accelerated using CUDA
The main difference between this and previous versions of channel
convolution implementations is that these functions take a real-world
approach to input/output where both could be split unevenly over a set of
buffers, e.g. ring buffers used in vrtsim.
The CUDA-accelerated version only works on systems with unified memory, e.g. NVidia
DGX Spark or GH
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Remove the \file directive, as it is always superfluous because the
current file is implicit [1]:
> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.
Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.
Eurecom code has been contributed and was under OAI PL v1.0/v1.1.
For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.
[1] https://www.doxygen.nl/manual/commands.html#cmdfile
Integration `2026.w13`
* !4004 Remove OSD, some scripts, oaisim references
* !3968 Fix DAS via index based beamforming
* !3982 UE: update pdcch config only after mib read
* !3851 Bugfix in UE DLSCH LLR functions
* !3933 mac: fixes to prevent prb overlapping
* !4006 Update cir-generator image tag to v0.0.1
* !4007 Remove old CUDA LDPC implementation
* !4005 FHI72: handle more than 64 cores
* !3805 \[E2 agent\] Refactor E2SM-KPM and implement support for REPORT style 1
* !3973 Introduce UE NAS Simulator
* !3966 PUCCH Format 1 decoder implementation and validation with nr_pucchsim
* !3681 Configure DigitalBeamTable in OAI and pass down to Aerial L1
* !3912 Fix Delta MCS mode, reimplement UL power control
* CI: Tune VNF configuration files in Aerial pipeline
Closes#1044
See merge request oai/openairinterface5g!4008
Adjust target SNR values and introduce RSSI thresholds in the VNF configuration
files to prevent UL saturation. These changes improve uplink stability and
performance for tests with Aerial and WNC RU.
Fix Delta MCS mode, reimplement UL power control
This change set fixes the "delta-MCS" mode, and reimplements the UL power
control loops at gNB, i.e., for PUSCH and PUCCH. It further adds new T traces
to log PUSCH/PUCCH power infrmation, and cleans up code.
The "delta-MCS" mode in OAI refers to configuring a UE with deltaMCS in the
PUSCH-PowerControl IE (see TS 38.331). In this mode, the UE adjusts the PUSCH
power for transmissions to take into account for MCS (see TS 38.213 Sec. 7.1).
In other words, the target SNR can be set to a somewhat low value, and the UE
will still use the right power for UL transmissions. Note that the spec only
foresees this adjustment of UL power when using one layer. In contrast, in the
"normal" mode, the gNB sends TPC commands to keep a UE at a fixed target SNR
(default: 20dB), regardless of the MCS or number of layers. Future work is
planned to completely remove this fixed target SNR, which is not done in this
MR yet.
Further, there is a new power control loop implementation. Prior to this MR, on
each UL transmissions, the gNB uses the SNR to decide about TPC sent to a UE in
the next transmissions. The new implementation relies on averaging the SNR, and
a "TPC in flight" average to account for the slow reaction of the average SNR.
The sum of both quantities is the current SNR that is used by the UE. See the
commit messages or documentation for more information.
Further cleanup to group data (e.g., power control configuration, refactoring of
code to save space, ...) is done. Two new T traces GNB_MAC_PUSCH_POWER_CONTROL
and GNB_MAC_PUCCH_POWER_CONTROL are added; documentation exists to explain how
to graphically plot corresponding graphs.
Configure DigitalBeamTable in OAI and pass down to Aerial L1
With this MR it will be possible to define a Beamtable in OAI and pass it down
to a L1 (Aerial or OAI) which then will either use them locally to apply
static beamforming (Split 8 with USRP) or pass them down to the RU using 7.2
split with Section Extension 1.
PUCCH Format 1 decoder implementation and validation with nr_pucchsim
This is the implementation of the PUCCH Format 1 decoder, validated with
pucchsim in the current branch.
Build:
./build_oai --nrUE --gNB --ninja --phy_simulators
Run tests:
ctest -L nr_pucchsim -j 8
Introduce UE NAS Simulator
This MR introduces a simple standalone tester for 5G UE NAS signaling and NGAP
messages. It connects to the AMF to perform NGAP and NAS encoding/decoding and
validates the UE Registration and PDU Session Establishment processes without
the overhead of a full Radio Access Network (PHY/MAC/RLC).
The motivation for this tester is as follows,
- This tester is a lightweight, deterministic tool to test the UE NAS layer
directly.
- Developers can easily inject specific NAS messages depending on the use-case.
- Developers can validate custom NAS/NGAP messages without the need to implement
complete RRC/MAC etc procedures.
Start the 5G Core network to test the UE NAS simulator. The compiling and
testing procedure is described below.
To compile:
mkdir build && cd build && cmake .. -GNinja && ninja nr-ue-nas-simulator-test
To run:
LD_LIBRARY_PATH=. ./tests/nr-ue-nas-simulator/nr-ue-nas-simulator-test -O ../tests/nr-ue-nas-simulator/test.conf
This commit completes the PUCCH Format 1 decoder implementation using
maximum-likelihood detection with RE averaging across symbols/RB (and
hop-wise averaging for intra-slot hopping). It also updates the PUCCH
simulation/test flow to align with the decoder changes, including
payload and logging consistency fixes needed for correct validation.
Do not limit DL power, because it is not done in the other pipelines
either. Set the UL target power high, as this increases the achievable
throughput high (PUCCH can be normal). Finally, increase BLER thresholds
to improve the MCS a bit.
[E2 agent] Refactor E2SM-KPM and implement support for REPORT style 1
- Refactor E2SM-KPM to:
- better handle different supported REPORT styles needed for "E2 Setup
Request"
- pass "Measurement Label" for calculating the measurement values
- Implement Subscription for E2SM-KPM REPORT style 1 and fill the PDSCH MCS
distribution measurement (CARR.PDSCHMCSDist)
- Fix the memory leakage caused by the UEs filtering based on NSSAI for REPORT
style 4
Tested successfully with and without ASan:
- in rfsim mode: gNB-mono, CU/DU and CU-CP/CU-UP/DU
- with the USRP B210: gNB-mono
and xapp_kpm_moni, xapp_rc_moni and xapp_kpm_rc xApps.
1. Allocate memory for the ue_id and ue_info_list arrays on the stack.
Explanation:
Every granularity period, the program passes through the fp_match_cond_type,
then through match_s_nssai_test_cond_type function pointers. Based on the node type,
the function used calloc() for these arrays.
=> the longer a connection with an E2SM-KPM xApp was, the more memory leakage occured.
2. If matched UEs > 0, only free the memory of ue_id content after each
Indication Message was sent.
Remove old CUDA LDPC implementation
A new implementation is under way in !3955. To simplify the MR, remove the old
LDPC CUDA implementation in a first step.
mac: fixes to prevent prb overlapping
- this patch fixes a bug in the MAC where the scheduled PRB resources can
overlap
- at the same time, we try to enforce the same semantics for "rbStart" (which
should be relative to the BWP) across the code as much as possible
Introduce new data structures to track the average SNR and RSSI, and
that allow to dynamically modify the target SNR (per UE) as well as
continuously get TPC updates based on the average SNR. The target SNR is
per power control loop (which a future commit will extend to use for
PUCCH).
Concretely, it maintains an average of measured SNR and RSSI. It also
updates "tpc_in_flight", which tracks TPC changes that don't show up in
the average yet. For instance, imagine that the target SNR of 15 changes
to 20. Three successive TPC commands need to be sent (+3, +1, +1), but
it will take time to show up in the average SNR. To account for this,
tpc_in_flight is updated by the TPCs sent, and an average will make it
go down back to zero at the same pace as the average SNR approaches the
target SNR. The sum of average SNR and tpc_in_flight sums up to the
actual, current SNR, which approximates the target SNR.
The SNR is kept within -1<=targetSNR<=+2dB to avoid too many TPC
changes.
The current average SNR (sum of average SNR and tpc_in_flight) is used
to continuously get TPC updates, taking into account recent TPCs sent,
the difference to target SNR, and RSSI.
If there is DTX, tpc_in_flight is modified to artificially introduce TPC
commands which increase the currently used SNR of the UE. This is
temporary, as tpc_in_flight eventually will go back to zero. If the DTX
was due to sudden SNR drop (e.g., higher path loss), this will allow to
quickly adapt the UE's SNR to new conditions.
The periodical logs are extended to not only show the current SNR, but
also the difference from the target for better analysis.
Co-authored-by: Maxime Elkael <m.elkael@northeastern.edu>
The phr_txpower_calc field actually needs to be saved in the HARQ
process for later retrieval, so set sched_pusch after phr_txpower_calc
has been calculated.
UE: update pdcch config only after mib read
- In MR !3929, this change was done to call update_pdcch_config if mac
configuration is changed.
- Observed that the issue related to RAR after handover if SSB position changes
occurs also in develop 2026_w10 where MR !3929 is merged.
- update_pdcch_config should be done only after sync obtained.
- this fix is similar to the fix in initial commits of MR !3929
* Option to build ldpc_cuda was remaining in the build script
* Build script option to build ldpc_cuda was still used in CI
* Mentions of ldpc_cuda were remaining in the documentation
Note: In the documentation, the example of ldpctest usage that was
loading ldpc_cuda was replaced by an example in which it is loading
ldpc_orig even though this is pointless as it makes ldpctest compare
ldpc_orig with ldpc_orig. On the other hand, it is the only library
other than the default ldpc that uses the former interface.
Remove OSD, some scripts, oaisim references
The README says:
It is just generating the XML file and it is placing it in
$(OPENAIR_TARGETS)/SIMU/EXAMPLE/OSD/WEBXML/ or http://localhost/xmlfile/
so that the oaisim could pars and run the simulation/emulation
oaisim does not exist anymore, and corresponding simulation cannot be done.
Also, it requires XAMPP and similar technologies, that I think nobody uses
in the context of OAI.
Remove also most references to oaisim.
Remove some scripts that are likely not used by anybody, or straight useless.
Integration `2026.w12`
* !3985 Fix XNAP to avoid recompilation and unnecessary includes
* !3724 Better c style pss sss
* !3972 Resolve "Demote AssertFatal `PUCCH list is full` message to a warning"
* !3956 [FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
* !3970 Fix for NTN phy-test mode
* !3987 T: minor: remove target record_db from automatic building
* !3993 UE: Derive Serving Network Name from SIB1 PLMN
* !3997 vrtsim doc: clarify container requirements
* !3935 [FHI72] Fix long PRACH format
* !3998 Set rxgain to 0 in vrtsim
* !3964 CI: Add FHI7.2 phytest pipeline
* !4001 Remove unused ci-scripts/mysql4testresults/ dir and content
* !3999 bugfix: use proper pointer
* !3986 handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing pattern 3 configuration.
* !3957 replace static allocation of max antennas in a dynamic structure for gnb rach
* !3859 Delay compensation in SRS
* !3909 Adjust ssPBCH_BlockPower in FHI7.2 configs
Closes#1058
See merge request oai/openairinterface5g!3989
Adjust ssPBCH_BlockPower in FHI7.2 configs
ssPBCH_BlockPower is the average EPRE of the resources elements that carry
secondary synchronization signals in dBm. In OAI, the SSB is the same level
as all the rest, so we can compute ssPBCH_BlockPower from RU TX power and
bandwidth using:
ssPBCH_BlockPower = P_TX(dBm) − 10 x log10(N_RB x 12)
where:
- P_TX is the RU transmit power
- 24 dBm for indoor RUs (configurable on the RU)
- 35 dBm for outdoor RUs (configurable on the RU)
- N_RB is the number of resource blocks for the configured bandwidth
- 12 corresponds to the number of subcarriers per RB
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
Meson configuration was configuring a wrong maximum number of lcores on
the Arm platforms we are using (Neoverse V2 & NVIDIA Grace) as no
configuration is provided for these platforms with DPDK 20.11.9.
This commit solves this issue by requesting meson to use a generic
config that sets a high maximum number of lcores.
handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing
pattern 3 configuration.
This MR adds support for handling a non-zero start symbol for SIB1 when using
multiplexing pattern 3 with the per-slot CP format.
Previously, the implementation assumed that the first downlink symbol used by
a PDU always starts at symbol 0. However, this assumption does not hold for
SIB1 under multiplexing pattern 3, where the start symbol can be non-zero.
This issue does not apply to the per-symbol CP format.
Testing:
a. Microamp using the branch microamp_1048: UE registration ok. end-to-end ok.
b. Benetel: UE registration ok. end-to-end ok.
xran needs to be informed about the cores to use for packet processing.
Prior to this change, we only filled the first 64bits, but it can go up
to 128 in xran. Change the helper accordingly to support all.
The README says:
> It is just generating the XML file and it is placing it in
> $(OPENAIR_TARGETS)/SIMU/EXAMPLE/OSD/WEBXML/ or http://localhost/xmlfile/
> so that the oaisim could pars and run the simulation/emulation
oaisim does not exist anymore, and corresponding simulation cannot be
done. Also, it requires XAMPP and similar technologies, that I think
nobody uses in the context of OAI.
PTRS phase error is estimated in each symbol and should be compesation in the
last symbol. So far nr_dlsch_llr() used rxdataF_comp before PTRS phase
correction for all symbol except the last one. This commit fixes it by calling
nr_dlsch_llr() for all symbols after rxdataF_comp is compensated for PTRS phase
error. To do so, dl_ch_mag arrays are moved out of nr_rx_pdsch() to hold values
of all symbols.
put symbol index as first dimension. It is necessary because the offset for
the buffer to start of a symbol can be arbitrary and hence not aligned to 32
byte boundary. Having each symbol in a separate dimension ensures alignment.
CI: Add FHI7.2 phytest pipeline
This MR consists of multiple changes related to FHI7.2 setups in CI.
- remove unused fhi72 configurations in CI
- introduce dpdk-init service in fhi72 deployments to setup sriov on the machine
- update phytest fhi72 configurations for running on bulbul
- add phytest fhi72 to RAN-SA-FHI72-CN5G pipeline
Set rxgain to 0 in vrtsim
Set rxgain to 0 in vrtsim to match rfsimulator behavior
This addresses the issue where RSRP is different between rfsim and vrtsim. With
this RSRP values between rfsim and vrtsim should be similar.
[FHI72] Fix long PRACH format
The problem was that xran_is_prach_slot() compared if the current slot is the
scheduled one. However, this becomes irrelevant if long PRACH format used.
Successfully tested end-to-end the PRACH index 7 with TDD DDDDDDDSUU and Benetel
v2.0.5.
- Introduce dpdk-init service for SR-IOV initialization within the container
- Execute script to enable low-latency RT performance (restored after tests)
When running phytest with FHI7.2 in Docker, two services are deployed:
dpdk-init and oai-gnb. Previously, AnalyzeRTStatsObject selected the
first deployed service for RT stats analysis.
Allow to explicitly select the service used for RT stats analysis instead
of relying on the first deployed service.
vrtsim doc: clarify container requirements
Describe how to set up vrtsim in containers, e.g., docker, and link to an
example. Add a minor clarification for the connection descriptor as well.
UE: Derive Serving Network Name from SIB1 PLMN
This MR modifies the nrUE to use the Serving Network Name derived from data
communicated by the Serving Network instead of data stored in the UICC.
Previously, the Serving Network Name (SNN) used during authentication was
constructed from the IMSI, implicitly assuming the UE was attached to its
home network. In roaming scenarios, this produced an incorrect SNN, causing
authentication and key derivation failures.
Changes:
- Extract the MCC and MNC from the SIB1 PLMN identity communicated by the
serving network.
- Store these values in the UE NAS context in order to propogate them from
RCC to NAS.
- The NAS key derivation functions (transferRES, derive_kausf, derive_kseaf)
now build the SNN based on the MCC/MNC broadcast in SIB1.
Extract MCC and MNC from the SIB1 PLMN identity and store them in the
UE NAS context to propogate them to NAS security procedures.
Previously, the Serving Network Name (SNN) used during authentication
was constructed from the IMSI, implicitly assuming the UE was attached
to its home network. In roaming scenarios, this produced an incorrect
SNN, causing authentication and key derivation failures.
The NAS key derivation functions (transferRES, derive_kausf, derive_kseaf)
now build the SNN using the MCC/MNC broadcast by the serving network in SIB1,
ensuring that authentication uses the correct serving PLMN during roaming.
T: minor: remove target record_db from automatic building
We don't install clickhouse by default, so simply running make inside
common/utils/T/ would fail. Remove record_db to not build automatically.
Fix for NTN phy-test mode
- Corrected the initialisation of ntn params changed flag. Before this change on
UE, Phy-test was not running in NTN mode.
- Removed the assert wrt slot > 64 to run FR2-NTN in phy-test
- SIB2, 19 required only in SA mode like SIB1
- Introduced new method to schedule a slot in UL/DL in Phy-test mode. Dmod/ Umod
option in the command line with a value.
- This ensures that the slot n (in slots per frame) will be scheduled if
n % value == 0
- For ex: --Dmod 1 means every slot will be scheduled
- --Dmod 2 means every 2nd slot will be scheduled, like 0,2,4,6 until the
slots per frame 1.
- this can be used for testing FDD FR2 where slots go beyond 64 which is a
limitation of -D/-U option.
[FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
The MR !3668 introduced a lot of unnecessary changes. This MR removes useless
code in both OAI and xran F release library.
1. Remove modifications done in the following xran functions:
process_mbuf_batch();
xran_process_srs_sym().
=> not even used with OAI 7.2 interface.
2. Also, remove xran_fs_get_num_dl_sym_sp() and xran_fs_get_num_ul_sym_sp() introduced in the same MR.
3. Remove LiteOnIgnoreUPSectionIdEnable parameter. Instead, use RunSlotPrbMapBySymbolEnable in a simple way
for xran_process_rx_sym() function.
Explanation: The xran expects UL UP packets with the same section IDs as indicated per UL CP message.
However, the section IDs of received packets are 3 for mixed slot and 13 for UL slot.
If the PRACH offset is set explicitely via config file, then its value will be used.
Otherwise, eAxC_offset = max(Nrx,Ntx).
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Better c style pss sss
there is a commit to simplify code for pss and sss detection
then a second commit to test a idea: detect SSS with a advantage for SSS
in phase with PSS
Only static long PRACH configuration verified, i.e. PRACH C-plane
is ignored by the RU.
Note: Introducing `N_ZC` and `num_prbu` parameters is needed for testing
with xran F release. However, in the K release, this information is
stored in xran_rx_packet_ctl struct.
Move PRACH slot checking from oaioran.c to oran_isolate.c because
xran_is_prach_slot() compared the current slot instead of the scheduled.
The current and the scheduled slot are the same in case of short format,
but different in case of format 0. Therefore, with this commit, in xran_is_prach_slot()
we check the `prach_id->slot` and not `slot`.
the code use a precomputed table of rotations: 16 steaps between -PI/3 and +PI/3
This commit replaces the precomputed table by in code computation.
This version improves code understanding, while it won't make any significant difference
Notably, remove asn_codecs_prim_xer.h from the list of files, triggering
problems when re-running ninja, because the "canonical OAI asn1c"
(https://github.com/mouse07410/asn1c, commit ID
940dd5fa9f3917913fd487b13dfddfacd0ded06e) does not generate it:
ninja explain: output openair2/XNAP/MESSAGES/asn_codecs_prim_xer.h doesn't exist
In this version, a couple of files are not generated, so remove them
from the list.
Also, leave the files in the order as shown by ls.
Integration `2026.w11`
* !3864 remove xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
* !3967 Harmonize the use of definition for number of symbols per slot
* !3971 Limit dl_DataToUL_ACK values to 15 as per standard
* !3414 Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* !3919 Reduce number of mutex locking in MAC->RLC direction
* !3923 XNAP: Add encode/decode and unit tests for Xn Setup Request/Response/Failure
* !3965 Enable BladeRF support in gNB Docker image
* !3904 add multi-ue support to vrtsim
* !3980 SDR reordering: correct warning, and USRP: return samples written
* !3834 Use flat buffer for txdataF in gNB L1
* !3981 Bugfix: make longer telnet cmdfunc names
* Reduce timing reference value for feptx_total in 40 MHz phytest
See merge request oai/openairinterface5g!3976
--Dmod option/--Umod option,
for example --Dmod 1 will schedule every slot in slots per frame
--Dmod 3 will schedule every 3rd slot. You can use --Dmod option togethor with -D option
same for uplink scheduling too.
for FR2 with 120Khz scs, there are 80 slots. Removed the assert such that FR2 config
can be tested in phy-test, currently bitmap works only until 64 slots.
Bugfix: make longer telnet cmdfunc names
The maximum number of cmdfunc names is 20, which IMO is too low. Worse, if it's
longer, nothing will warn us because C will just fill the array to it's end
(without \0 at the end). To remedy this:
- Allow longer names till 64 bytes (I hit the previous limit of 20)
- Check that the name is within the length limit: if somebody wants a very long
name, the strnlen() will return the maximum length, hitting that assertion.
- When reading a command during runtime, allow the corresponding maximum length.
On that occasion, also increase total number of permitted cmdfuncs.
Use flat buffer for txdataF in gNB L1
This MR changes txdataF buffer format to hold freq domain data starting from
PRB0 instead of circular buffer that starts from PRB N/2. The motive is to
simplify RE mapping function in L1 and copying data to xran lib.
- Add num_ues and ue_id parameters for server and client configuration
- Implement ul combining and dl distribution to all ues
- Each ue uses dedicated antenna offsets based on ue_id
- Works with no-chanmod mode only and with uniform antenna dimensions across all ues
The maximum number of cmdfunc names is 20, which IMO is too low. Worse,
if it's longer, nothing will warn us because C will just fill the array
to it's end (without \0 at the end). To remedy this:
- Allow longer names till 64 bytes (I hit the previous limit of 20)
- Check that the name is within the length limit: if somebody wants a
very long name, the strnlen() will return the maximum length, hitting
that assertion.
- When reading a command during runtime, allow the corresponding maximum
length.
On that occasion, also increase total number of permitted cmdfuncs.
The original error was simply "failed to write to RF", which is not very
precise. Update with sample numbers for context, and add it in another
similar case for consistency.
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
At least writerProcessWaitingQueue() checks for the exact number of
samples written. In many other places, we check that the return is
non-zero.
The usrp-tx-write-thread functionality returned 0, which triggers
various problems. Return the number of samples, as in the "direct write"
case (if-block before else-block).
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
XNAP: Add encode/decode and unit tests for Xn Setup Request/Response/Failure
This MR adds complete support for the following in accordance with
3GPP TS 38.423 v16.2.0
- Add Xn Setup Request, Response, and Failure message type definitions
- Implement ASN.1 encode/decode for all Xn Setup messages
- Add equality checks and memory management helpers
- Create XNAP unit test infrastructure
Co-author: @venkatareddy
Acknowledgement
This work was carried out as part of research and development at Indian
Institute of Science (IISc), Bengaluru.
Reduce number of mutex locking in MAC->RLC direction
Currently, the scheduler locks RLC for each operation. Concretely
- for RLC status indication (to get amount of bytes per LC), it locks per LC
- for RLC indication (UL traffic), it locks for each MAC SDU of which there can
be multiple in a TB
- for RLC data req (getting data from RLC to put into a transport block), it
locks for each LCID and PDU to get.
This can have a certain overhead, because we need to re-lock RLC multiple times
instead of once (per operation above). In this MR, rework the interfaces such
that it is possible to get all information/data in a single lock-unlock cycle,
which should also help with "spikes" of scheduler times (in some scenarios, it
seems the scheduler takes longer than 0.5ms, and while it's not only locking,
re-locking might contribute), and an increase of number of UEs (e.g., instead
of doing 3 * N UEs lock cycles for getting status of SRB1, SRB2, DRB1, we do
only N times). Concretely, for each UEs RLC status indication, we lock once,
only once per LCID when filling a TB (in particular for LCID 4, on high
throughput, it might be many times), and only once per UL TB (for the common
case of UL data).
Minor fixes include the increase of the Aerial VNF thread priority, and reducing
the maximum RLC indication size to reduce excessive computation (we can't have
1MB in one TB, it is too much).
Adds the API, which will always prepend a 3 byte header before writing a
PDU. This can be used to call less often into RLC, and avoid potential
locking.
The API is used at the gNB DLSCH scheduler. Also, this removes the
"overhead" calculation: since we fill the entire TB at once, RLC will
leave space for headers as necessary.
- Add Xn Setup Response message type definitions
- Implement encoder and decoder for Xn Setup Response
Xn Setup Response (3GPP TS 38.423v16.2.0 §9.1.3.2)
- Global NG-RAN Node ID (M)
- TAI Support List (M)
- Add equality check and memory management helpers
- Extend XNAP library unit tests to cover Setup Response
- Add initial XnAP library structure under openair2/XNAP/lib
- Implement common XnAP helper utilities (xnap_lib_common)
- Add gNB interface management module for Xn Setup procedures
- Introduce XnAP message type definitions in xnap_messages_types.h
- Integrate XnAP library into build system (CMakeLists.txt)
- Add standalone XnAP library unit test (xnap_lib_test)
- Implement encoder, decoder + test for Xn Setup Request
Xn Setup Request (3GPP TS 38.423v16.2.0 §9.1.3.1)
- Global NG-RAN Node ID (M)
- TAI Support List (M)
- AMF Region Information (M)
- Extend conversions.h with MACRO_BIT_STRING_TO_GNB_ID utility
Co-authored-by: Sreeshma Shiv <sreeshmau@iisc.ac.in>
Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* NTN-FR2 bands 510, 511, 512 added. TS 38.101-5 v 18.9 defines these 3 FR2-FDD
bands for NTN operation.
* These bands are defined in Ka band range (17.3Ghz - 31Ghz).
* Tested using the added conf files using RFSIM and GEO configuration.
* There were some inconsistencies observed when testing with RFSimulator before UE
Syncs to the gNB in terms of samples being written for FR2 configurations. Once
the UE syncs, the inconsistencies disappear.
* this is the problem - UE writes incorrect number of samples and gNB complains
about getting samples in past
* The above inconsistencies were also fixed in this merge request.
* These commits solving above inconsistencies were removed from this MR and a
different MR was raised. MR with those commits: !3928.
So far txdataF buffer has DC RE as the first element. This was prefered
most likely to avoid memcpy before iFFT but comes with a small
complexity in RE mapping functions.
Instead, we use a flat buffer that holds freq domain data starting from
first negative SC. After resource mapping is done on all channels, each
OFDM symbol is shifted before iFFT so that the buffer start with DC RE.
This reduces complexity in mapping functions and later on when passing
beam IDs to 7.2 split RU especially when a beam is associated to
interleaved RB and/or REs.
There is already a memcpy in place to copy txdataF from gNB stuct to RU
struct. So this change does not introduce new memcpy.
Limit dl_DataToUL_ACK values to 15 as per standard
If min feedback time is high enough otherwise we might fail to encode/decode
pucch-Config
Assertion (enc_rval.encoded > 0 && enc_rval.encoded <= max_buffer_size * 8) failed!
In encode_cellGroupConfig() /home/francesco/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:4029
ASN1 message encoding failed (dl-DataToUL-ACK, 18446744073709551615)!
remove xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
We have separate functions ran_fh_tx_send_slot_BySymbol() and
xran_fh_rx_read_slot_BySymbol() for liteon. This MR is to remove those separate
functions.
Main author: Teodora Vladić
Co-author: Mario Joa-Ng
Changes:
xran_fh_tx_send_slot() is using if then else to handle per slot and per symbol
logic. xran_fh_rx_read_slot() is straightforward.
Testing:
- Liteon: Verified end-to-end.
- Benetel: (per slot without beam_id): Verified end-to-end.
- Microamp: (per slot with beam_id): Verified end-to-end. The branch
microamp_F_harmonize is used instead as microamp could not be run with develop
branch.
params_changed flag is set to true when reconfig.raw file gets processed,
as NTN config is present in reconfiguration.
but due to this initialisation happening at a later point
params_changed is reset which results in incorrect writes on RFsimulator
Even though the NR ARFCN uses a 15 kHz raster until 24250 MHz,
the ssb_offset_point_a is still scaled by 60 kHz for FR2.
So we need two different scaling factors.
NTN-FR2 bands 510, 511, 512 added.
TS 38.101-5 v 18.9 defines these 3 FR2-FDD bands for NTN operation.
These bands are defined in Ka band range (17.3Ghz - 31Ghz)
UL STEPSIZE, UL NOFFS added into band table
Integration `2026.w10`
* !3946 UE L1 cleanup
* !3929 UE: Fix if target cell during handover has SSB at a different offset as in source cell
* !3961 Remove Ubuntu 20 and RHEL/Rocky 8 support, increase cmake min version
* !3884 Integrate NRPPA and NGAP messages required for positioning
* !3784 CI: Create new pipeline for testing with Aerial and Jetson
* !3697 fix: issue 911 - OAI gNB hangs when AMF connection goes down
* !3914 Fix dB_fixed() function
* !3800 Add tracer to record configured events to database
* !3954 UHD streamer thread priorities in nrUE
* !3846 rename with distinct names structs and related typedefs, remove spread struct keyword
* !3958 Remove unused function arguments
Closes#911
See merge request oai/openairinterface5g!3962
Remove unused function arguments
Some of them, because there are hundreds if not thousands. Warnings at compilation time can be enabled using -Wunused-parameter.
Fix dB_fixed() function
- dB_fixed(0) returns 0 in develop branch;
- 0 in dB is -INF, but since we're dealing with integer variables, we'll put
20*log10(2^-15) in the output of dB_fixed() function, instead of 0.
- make all users use signed variables
fix: issue 911 - OAI gNB hangs when AMF connection goes down
Once the AMF is down, based on the AMF UE NGAP ID and RAN UE NGAP ID,
the UE associated with the AMF is found
All the contexts related to the UE are released and the timer is started
in the NGAP to look up for the SCTP association. The AMF-gNB reconnection
is made if an SCTP connection is found, also the registration of multiple
UE is triggered
These actions are based on the reference from 4.2.6 AN release Specs
TS 123 502 V16.7.0 (2021-01)
When the NG-AP signalling connection is lost due to (R)AN or AMF failure,
the AN release is performed locally by the AMF or the (R)AN as described
in the procedure flow below without using or relying on any of the signalling
shown between (R)AN and AMF. The AN release causes all UP connections of the UE
to be deactivated.
closes#911
Integrate NRPPA and NGAP messages required for positioning
This MR integrates NRPPA and NGAP messages required for positioning.
The following NGAP messages are integrated (3GPP 38.413 Version 16.0.0):
NGAP UPLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP UPLINK NON UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK NON UE ASSOCIATED NRPPA TRANSPORT
The following NRPPA messages are integrated (3GPP 38.455 Version 16.7.1):
TRP Information Request
TRP Information Response
Positioning Information Request
Positioning Information Response
Positioning activation request
Positioning Activation Response
Measurement Request
Measurement Response
This MR tests these messages via a standalone tester nr-cu-nrppa-test that
connects to the AMF to perform NGAP enc/dec and NRPPA enc/dec
Core Network:
To pull the docker images:
docker pull oaisoftwarealliance/ims:latest
docker pull oaisoftwarealliance/oai-amf:develop
docker pull oaisoftwarealliance/oai-nrf:develop
docker pull oaisoftwarealliance/oai-smf:develop
docker pull oaisoftwarealliance/oai-udr:develop
docker pull oaisoftwarealliance/oai-upf:develop
docker pull oaisoftwarealliance/oai-udm:develop
docker pull oaisoftwarealliance/oai-ausf:develop
docker pull oaisoftwarealliance/oai-lmf:develop
openairinterface5g$ cd doc/tutorial_resources/oai-cn5g
To deploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml up -d
To undeploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml down -t 0
RAN:
To compile:
openairinterface5g$ mkdir build
openairinterface5g$ cd build
openairinterface5g/build$ cmake .. -GNinja
openairinterface5g/build$ ninja nr-cu-nrppa-test
To run:
openairinterface5g/build$ LD_LIBRARY_PATH=. ./tests/nr-cu-nrppa/nr-cu-nrppa-test -O ../tests/nr-cu-nrppa/nr-nrppa-test.conf
To initiate positioning procedure:
openairinterface5g$ cd doc/tutorial_resources/positioning/
openairinterface5g/doc/tutorial_resources/positioning$ curl --http2-prior-knowledge -H "Content-Type: application/json" -d "@InputData.json" -X POST http://192.168.70.141:8080/nlmf-loc/v1/determine-location
This extends the functionality provided by record in that it allows
collection of data into a Clickhouse database, allowing aggregation of
data from gNB and UE for functions like channel estimation for PUSCH
transmissions that did not decode successfully at the gNB.
It is intended to be used in conjunction with Aerial Data Lake but is
not limited to it. Data access is simpler than in !3462, but could be
improved using the metadata approach from !3462.
The integration uses logfmt for fast logging, and a clickhouse DB
client, both integrated using CPM.
This change set also adds a docker-compose file for a UE on 100MHz, to
be used with Aerial configurations, and builds the tracer for Aerial and
nrUE docker files.
- Extended fix to support multiple UEs instead of single UE
- Actions now trigger upon AMF reconnection
Per 3GPP TS 123 502 V16.7.0 (2021-01) Section 4.2.6 (AN Release):
When NG-AP signalling connection is lost due to (R)AN or AMF failure,
AN release is performed locally by AMF or (R)AN without relying on
signalling between (R)AN and AMF. This deactivates all UP connections.
Remove Ubuntu 20 and RHEL/Rocky 8 support, increase cmake min version
Ubuntu 20 is EOL [1]. This was the version with the lowest CMake version, so
we can increment the minimum CMake version to 3.19 as well. Increasing the
minimum version will in particular help with the integration of CUDA (updates
in 3.17 and 3.18), the current 3.19 brings better support for apple silicon.
Some minor CMake updates (removing superfluous files and dependencies).
[1] https://ubuntu.com/blog/ubuntu-20-04-lts-end-of-life-standard-support-is-coming-to-an-end-heres-how-to-prepare
UE: Fix if target cell during handover has SSB at a different offset as in source cell
These changes fixed these observed issues:
- If target cell has a different SSB position compared to source cell during
ho - sync was not successful.
- RAR does not get decoded if SSB position has changed on the target cell
compared to source cell.
0 in dB is -INF, but since we're dealing with integer variables, we'll put 10*log10(2^-30) in the output, which corresponds to the symmetrical maximum output of the function.
without this fix, after sync is successful, RAR is not getting decoded.
PDCCH area also changes as SSB offset can change. if MAC configuration changes.
Actual problem is that SYNC does not happen on the target cell as frame parameters is not updated
and ssb start carrier is not correct in the UE frame parameters
function nr_get_ssb_start_sc to determine ssb_start_subcarrier
Ubuntu 20 is EOL [1] unless people pay for support. Therefore, remove it
from build_helper. People can still use it, but might need to install a
more recent cmake version (which the next commit will upgrade). The rest
should be the same.
[1] https://ubuntu.com/about/release-cycle
- Performs NGAP setup request and handles NGAP setup response
- This is introduced to test NGAP enc/dec of the NRPPa messages
To compile:
openairinterface5g$ mkdir build
openairinterface5g$ cd build
openairinterface5g/build$ cmake .. -GNinja
openairinterface5g/build$ ninja nr-cu-nrppa-test
To run:
openairinterface5g/build$ LD_LIBRARY_PATH=. ./tests/nr-cu-nrppa/nr-cu-nrppa-test -O ../tests/nr-cu-nrppa/nr-nrppa-test.conf
Compute ssPBCH_BlockPower from RU max TX power and bandwidth
ssPBCH_BlockPower = P_TX(dBm) − 10 x log10(N_RB x 12)
Assume P_TX = 24 dBm for indoor RUs and 35 dBm for outdoor RUs.
2026-02-09 16:58:14 +01:00
3397 changed files with 40663 additions and 69009 deletions
self.htmlFile.write(' <div class="well well-lg">End of Test Report -- Copyright <span class="glyphicon glyphicon-copyright-mark"></span> 2025 <a href="http://www.openairinterface.org/">OpenAirInterface</a>. All Rights Reserved.</div>\n')
self.htmlFile.write(' <div class="well well-lg">End of Test Report -- Copyright <span class="glyphicon glyphicon-copyright-mark"></span> 2026 <a href="http://www.openairinterface.org/">OpenAirInterface</a>. All Rights Reserved.</div>\n')
These scripts are used by a Jenkins [job](../Jenkinsfile-colosseum) to trigger automated testing of OpenAirInterface (OAI) gNB and softUE on the [Colosseum](https://www.northeastern.edu/colosseum/) Open RAN digital twin.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
