Integration: `2025.w22`
Closes#832
See merge request oai/openairinterface5g!3452
* !3415 several fixes and cleanup for nrLDPC_coding_t2
* !3448 T: macpdu2wireshark: dump to file instead of sending UDP packets
* !3449 bugfix: pass correct buffer
* !3453 CI: revert modification of SSB per RACH occasion in SC-FDMA test
* !3440 Update NAS documentation
* !3451 fix the number of preambles per SSB at UE in case PRACH is configured with groupB
* !3441 Replace hashtable with epoll_event_t in rfsimulator
* !3277 Add CI test to force RRC IDLE and new connection setup with 5G-S-TMSI
* !3454 Keep old MAC stats after re-establishment
* !3450 Make number of UL/DL actors in NR UE fully configurable
* !3458 (doc): update README with build icons for dedicated arch and os
Make number of UL/DL actors in NR UE fully configurable
Due to different processing requirements on different CPUs it might be
beneficial to enable the users to set the number of UL/DL actors.
Allow disabling UL/DL actor frameworks and processing inline or setting
the number of DL/UL threads with --num-ul-actors/num-dl-actors
This was tested to work with 0 UL/DL actors with rfsim.
Due to different processing requirements on different CPUs it might
be beneficial to enable the users to set the number of UL/DL actors.
Allow disabling UL/DL actor frameworks and processing inline or
setting the number of DL/UL threads with --num-ul-actors/num-dl-actors
This was tested to work with 0 UL/DL actors with rfsim.
Add CI test to force RRC IDLE and new connection setup with 5G-S-TMSI
This MR is a follow up to !2725 (merged)..
The primary goal is to introduce a CI test that enforces the following behavior:
- Forces the UE to enter RRC_IDLE state.
- Validates the UE's re-connection procedure using the 5G-S-TMSI as the UE
identity.
fix the number of preambles per SSB at UE in case PRACH is configured with groupB
To fix an issue reported in the mailing list related to UE configured by a 3rd
party gNB with groupB PRACH
Replace hashtable with epoll_event_t in rfsimulator
Replace the FD <-> buffer_t hashtable with epoll_event_t mapping. This
simplifies the code, reduces the probability of memory leaks, and removes
a possible data race on the hashtable during rfsimulator shutdown.
Replace the FD <-> buffer_t hashtable with epoll_event_t mapping.
This simplifies the code, reduces the probability of memory leaks and removes a
possible data race on the hashtable during rfsimulator shutdown.
The UE shall use the currently stored UL NAS count to derive the
KgNB. Hardcoding the UL count to 0 is wrong, if there is a reset
to be done it should be explicitly done elsewhere.
Closes#832
The Security Mode Command is the only NAS message sending a security header
type "integrity protected with new 5G NAS security context". Such header
type is indicating that there is no valid security context and it is
indicating the current one configured by the AMF.
When receiving a Security Mode Command the "AMF shall reset the downlink NAS COUNT"
and use it to integrity protect the initial Security Mode Command. "The AMF shall
send the SECURITY MODE COMMAND message unciphered, but shall integrity protect [...]
The AMF shall set the security header type of the message to
"integrity protected with new 5G NAS security context".
See 5.4.2.2 3GPP TS 24.501.
This commit is ensuring the NAS DL count is reset when the relevant security header
is received. Also, the security container is deleted since no more valid and
NAS_SECURITY_NO_SECURITY_CONTEXT is returned. The setup of the new security context
is done by "handle_security_mode_command",
NAS 3GPP TS 24.501 clause 4.4.4.2 specify which NAS messages
are an exception to the integrity protection. All the other
scenarios are expected to be integrity protected. The
nas_security_rx_process function is returning:
1) NAS_SECURITY_NO_SECURITY_CONTEXT if no security context is established
2) NAS_SECURITY_UNPROTECTED for the messages listed in 4.4.4.2
3) NAS_SECURITY_INTEGRITY_PASSED if the integrity check is successful
These 3 results can be all considered successful. The other not.
Also, add a function to check whether a message is allowed to be
integrity unprotected, as per clause 4.2.2.2.
* trigger Identity Response callback from the handler
* process decoded message
According to 4.4.4.2 3GPP TS 24.501, Identity Request
with Identity Type SUCI is not expected to be
integrity protected.
The information about the payload carried by NAS DOWNLINK is helpful
in the logging and also for debugging purposes, therefore it was
added in this commit by enabling the already existing relevant function.
This commit restores the behaviour before the changes introduced in 611c0554. The NAS
Deregistration Accept message is unprotected, therefore the function will return
NAS_SECURITY_UNPROTECTED that would then be considered as NAS_SECURITY_INTEGRITY_PASSED
Unprotected message have a plain header of 3 octets, however security protected messages
have a 7 octets header.
* Close entity->pdusession_sock manually before pthread_join() to unblock sdap_tun_read_thread()
* Update tun_destroy() to open a fresh socket for interface management, independent from the data socket
* Fix check on success of change_interface_state() in tun_destroy(): is a boolean
* Handle ENODEV error when bringing interface down: treat as success if the interface is already gone.
* tun_destroy() is now handling INTERFACE_DOWN, so `INTERFACE_DOWN` in `tun_config()` is no longer needed
CI: revert modification of SSB per RACH occasion in SC-FDMA test
This MR reverts the parameter ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR back
to 4, undoing the change introduced in commit a4f9a7a6. The initial modification
was made as a potential fix for a reestablishment failure observed in the SC-FDMA
test case of the SABOX-B200 pipeline. However, further validation has shown that
this parameter was not the root cause of the issue.
T: macpdu2wireshark: dump to file instead of sending UDP packets
In NR with several layers, we may have MAC PDU of size bigger than 64KB,
which does not fit into a UDP buffer, destroying macpdu2wireshark.
Let's add an option to dump to a pcap file instead of using UDP packets.
The DLT 252 magic is used (check wireshark documentation to understand).
Run macpdu2wireshark with -h to see how to configure wireshark to read
the produced files.
several fixes and cleanup for nrLDPC_coding_t2
Newer DPDK driver versions may directly provide the internal HW mbuf in the
dequeued structure. So don't try to free the mbufs from that dequeued structure,
but the ones we allocated. Also, this mbuf has an offset to its output data, we
must consider this when accessing the output data.
Main contents of this MR:
- support newer DPDK versions
- make sure to free allocated mbufs
- fix q_bufs memory leak
- use rte_pktmbuf_mtod_offset() to consider offset when accessing output data
- convert the correct number of LLRs from 16 Bit to 8 Bit
- remove unused variables and functions
- some more code cleanup
In NR with several layers, we may have MAC PDU of size bigger than 64KB,
which does not fit into a UDP buffer, destroying macpdu2wireshark.
Let's add an option to dump to a pcap file instead of using UDP packets.
The DLT 252 magic is used (check wireshark documentation to understand).
Run macpdu2wireshark with -h to see how to configure wireshark to read
the produced files.
The DPDK driver may directly provide the internal HW mbuf in the dequeued structure.
So don't try to free the mbufs from that dequeued structure, but the ones we allocated.
Integration: `2025.w20`
Closes#826 and #884
See merge request oai/openairinterface5g!3438
* !3168 Improvements for LDPC encoding
* !3386 E1 Bearer Context Release enc/dec lib and unit test
* !3394 Fix Liteon with MTU 1500 and update the FHI docs
* !3437 CI: RFsim F1/HO: Use hanging-workaround to avoid blocking of second client
* !3384 Add enc/dec library and unit test for E1 Bearer Context Modification Failure
* !3418 Use common function to generate CSI-RS signal
* !3379 Add physim tests into ctest framework
* !3420 Added intercommunication between namespaces
* !3422 Tutorials: updates for NR SA Tutorials
* !3436 Beam switching small fixes
* !3439 Fix RRC resources periodicity determination according to number of slots per period
* !3434 Remove EPC/UE main.py parameters
* !3423 Fix PDSCH and PUSCH BWP Start and Size when PXSCH is scheduled with a DCI format x_0 in any type of PDCCH common search space
* !3442 Fix UL chanel estimates mapping in 2-layer MMSE receiver
Fix UL chanel estimates mapping in 2-layer MMSE receiver
This MR addresses a degradation in UL throughput observed in 4x4 MIMO
tests, starting from 2025.w17.
The issue was traced to incoherent indexing in the ul_ch_estimates_ext
when handling 4-antenna UL configurations.
Fix PDSCH and PUSCH BWP Start and Size when PXSCH is scheduled with a DCI format x_0 in any type of PDCCH common search space
- Fix PDSCH and PUSCH BWP Start and Size when PDSCH/PUSCH is scheduled
with a DCI format x_0 in any type of PDCCH common search space
- Fix resource block assignment information (RIV field) for DCI format
x_0 when scheduling in any type of PDCCH common search space
Fix RRC resources periodicity determination according to number of slots per period
Otherwise we may end up in scenarios where some channels would end in
the wrong TDD slot type
Tutorials: updates for NR SA Tutorials
- Update links for the latest Ubuntu 24.04.2 LTS iso file
- Update docker install to the latest instructions on the official
website
- Update UHD to v4.8.0.0
- Add support for 'default'/"empty" DNN to CN5G configuration file
* Add support for 'default' DNN to CN5G configuration file (that
will also be used when DNN is not available, "empty" DNN). This
configuration will allow most of the COTS UE to get PDUSession
without any APN configuration made by the user
* The 'default'/"empty" DNN configuration support was added in
oai/cn5g/oai-cn5g-amf!343
Add physim tests into ctest framework
Convert physim testcases listed in
cmake_targets/autotests/test_case_list.xml into ctest. Note: Tests for
dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero =
fail. For some simulators, the return code is non-zero even when the
test is successful (as indicated by success messages in the test logs).
For some simulators, the return code is always '0'. This inconsistency
has been address in the first two commits of this MR.
To build and execute these tests:
- using cmake
cd openairinterface5g
mkdir build && cd build # you can also do that in cmake_targets/ran_build/build
cmake .. -GNinja -DENABLE_PHYSIM_TESTS=ON && ninja tests
ctest
- using build_oai: physim-related ctests are activated when PHY
simulators are built (use build_oai with '-P' or '--phy_simulators'
option)
cd openairinterface5g/cmake_targets
./build_oai --ninja --phy_simulators
cd ran_build/build
ctest
Link to newly created 4g and 5g RAN-Physim-Cluster pipelines:
- RAN-Physim-Cluster-4G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-4G/
- RAN-Physim-Cluster-5G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-5G/
Initially we were testing SNR from -3 to 7 dB, in recent runs PUCCH test
succeeds at SNR = 0 or 1 dB. Starting at higher SNR helps to reduce test
runtime. Set maximum SNR to 7dB, as it was done in the initial test scenario,
to ensure that possible performance degradation is detected.
The cls_physim1.py is no longer needed. Function for physim deployment has
been migrated to the Cluster class. Log analysis functionality has been
moved to the Analysis class.
Set the CMAKE_RUNTIME_OUTPUT_DIRECTORY CMake option during the OAI build
to control the location of runtime target files. This ensures that ctest
can locate necessary executables after they are copied to the target
Docker image.
Convert physim testcases defined in cmake_targets/autotests/test_case_list.xml
into CTest based tests. These test are activated when '-DENABLE_PHYSIM_TESTS=ON'
CMake flag is set.
Note: Tests for dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero = fail.
The following table outlines the physim executables, their success expressions
(`expr_true`), and the return codes for success (`ret_success`) and failure
(`ret_fail`). The `expr_true` is used in test_case_list.xml to check for test
results.
| test_exec | expr_true | ret_succ | ret_fail |
| ------------- | -------------- | --------------- | ----------------- |
| dlsim | passed | 0 | -1 |
| ulsim | passed | 0 (ret) | 1 (ret) |
| ldpctest | BLER 0.000000 | 0 | 1 |
| polartest | BLER= 0.000000 | 0 | 1 |
| nr_pbchsim | PBCH test OK | 0 | 1 |
| nr_dlsim | PDSCH test OK | 0 | 1 |
| smallblocktest| BLER= 0.000000 | 0 | 1 |
| nr_ulschsim | PUSCH test OK | 0 (n_errors) | n_errors |
| nr_pucchsim | PUCCH test OK | 0 | 1 |
| nr_ulsim | PUSCH test OK | 0 (ret) | -1 (ret) |
| nr_prachsim | PRACH test OK | 0 (prach_errors)| > 0 (prach_errors)|
| nr_psbchsim | PSBCH test OK | 0 (errors) | > 0 (errors) |
Add CMake flag "ENABLE_PHYSIM_TESTS=ON" when building OAI with "-P"
or "--phy_simulators" option. This allows physim-related ctest to
be executed from build directory.
Add dependency on coding lib for all 4G physims
Setting the DEBUG_UE_TIMING flag caused a flood of UE timing logs, resulting
in dlsim output logs as large as 1.5MB per test in CI. This commit comments
out the line where we set the flag to reduce log verbosity.
- Change return value of nr_dlsim, nr_pbchsim and nr_pucchsim to:
- Return '0' if test succeeds (indicated also by "PDSCH/PBCH/PUCCH test
OK" in the test log).
- Return '1' if test fails.
- Updated polartest, smallblocktest, and ldpctest to check BLER and return
appropriate status:
- Returns '0' if BLER equals 0.000000 (indicating success).
- Returns '1' for all other BLER values (indicating failure).
- This change improves consistency in return values across the test physims.
Add enc/dec library and unit test for E1 Bearer Context Modification Failure
This MR is adding:
- the enc/dec library
- unit test
- handler and callback in stack
For the E1 Bearer Context Modification Failure.
Fix Liteon with MTU 1500 and update the FHI docs
- Closes#884 - needed to update the max fragments needed for
transmission of one symbol; technically, 5 are enough but due to wrong
equation in the xran F release we had to increase to 6
- Clarify packet length for VFs
- Update Foxconn doc and config file with MTU set for jumbo frames
- Update Benetel docs with new version v1.2.2
E1 Bearer Context Release enc/dec lib and unit test
This MR is adding:
- the enc/dec library
- unit test
And adopting the lib in stack, for the E1 Bearer Context Release.
Improvements for LDPC encoding
AVX512 modifications for LDPC encoding: interleaving, ZC384 BG1, output
formatting for encoder, segmentation (memcpy instead of loop). some
improvement in TX for aarch64 in same places where AVX512 support was
added. Also, rate matching and interleaving are done on bytes containing
8 segments and reformatting of the output is done at the end of segment
processing instead of after ldpc encoding.
This improves the overall performance of the NR DL transmitter in gNB
See the merge request description for numbers.
Release all SDAP entities for a UE in nr_rrc_going_to_IDLE().
With this change the SDAP entities of the UE are cleaned up
when going into RRC_IDLE, including tun sockets, threads etc.
A new SDAP entity is created when re-attaching to the network.
- modify retrieve_ldpc_enc_op() to store encoded results in a packed format
- add timing measurements for T2 encoder
- add simde implementation for bit reversal
- Introduce new bit reversal implementation using simde_mm_gf2p8affine_epi64_epi8
instruction, based on https://wunkolo.github.io/post/2020/11/gf2p8affineqb-bit-reversal/.
This implementation requires GFNI and AVX512VL support on the target machine.
1. The encoder writes the output in sequence after the encoding tasks completed instead of writing within the tasks.
2. Simplify the output writing to make it more readable.
Co-authored-by: Laurent Thomas <laurent.thomas@open-cells.com>
There was a risk of a race condition between encoding tasks on the output array.
It could be that two task compete in writing a word at the border of their respective segment groups.
This commit offers to solve this issue by retaining the tail word in a struct that is returned after task completion so that segment group border can be fixed after completion of all the tasks.
Comes with additional cleanups of nrLDPC_coding_segment_encoder:
1. Move the section of code dedicated to writing to the encoding library output to a separate function.
2. Remove bit interleave debug in AVX512VBMI case of output writing for improving code readability.
1. nrLDPC_coding_segment_encoding: Clarifying encoder parameters
The way the encoder implementation params was used could be made clearer:
* `macro_num` was always used in order to calculate segment indexes.
It is clearer to pass directly the first segment index.
* The initialisation of a common implementation parameters structure can be made clearer.
2. nrLDPC_coding_segment_encoder: Remove multi segment dimension in encoder output
The output of `LDPCencoder` was a 2D unsigned char array.
But all the segments were actually packed in the first segment, 8 bits of different segments per byte of the first segment.
So the first dimension was useless. This commit removes this dimension.
3. nrLDPC_coding_segment_encoder: Rename `nrLDPC_prepare_TB_encoding` into `nrLDPC_launch_TB_encoding`
4. nrLDPC_coding_segment_encoder: Remove the useless second rate matching for E2, one rate matching with max(E, E2) does the job.
5. nr_interleaving_ldpc: cleanup
Rewrite code to use different SIMD sizes in a linear fashion.
This means cascading preprocessor directives are used to start from a high SIMD size an decrease it progressively.
6. ldpc_encoder_optim8segmulti: linear usage of SIMD
Use cascading preprocessor directives to include different SIMD sizes and types depending on which are available on the system.
The different loops use a common index that is progressively incremented.
Also add AVX512 version of bits distribution from 8 segments into one byte.
Co-authored-by: Laurent Thomas <laurent.thomas@open-cells.com>
Since this branch aims to bring all the encoded segments packed and contiguous,
it doesn't make anymore sense to have one output array per segment.
Therefore this commit moves the output array to the TB instead of the segment and adapts its size.
TODO: Adapt the size of f where it is relevant.
1. nrLDPC_coding_segment_encoder: pointer not aligned on 64 bits
An undefined behavior was happening because of a shift on a __m64 which
was actually a uint32_t which was not aligned on 64 bits.
This commit suggests a fix by properly loading into a __m64 with _mm_set_pi32
before performing the shift.
2. nr_rate_matching: Filler bits detection
Previously, if the bit selection was reaching Ncb and restarting selection from the beginning of encoded data, the filler bits were detected by testing the bytes again NR_NULL which was equal to 2.
But on this branch the bits of up to 8 segments are stored in one byte while doing rate matching so that one byte could be tested to be a filler while it is not.
So this commit changes the way to test filler bits.
Instead of relying on NR_NULL, bit selection now relies on the offset and size of filler bits.
3. nr_ulsch_coding: missing filling f with zeros
The array `f` of the UE UL HARQ process was not filled with zeros between transmissions.
This is a problem if the encoder does not properly overwrite its output.
In order to avoid such situation, this commit adds a memset to fill `f` with zeros before passing it to the encoder.
4. nrLDPC_coding_segment_encoder: missing init of f to zeros
In the encoder, `f` is not filled with zeros before being used.
`f` is instead somehow filled with arbitrary values.
When writing to `output` by 64 bit vectors, some arbitrary bits may be added after the segment.
Then the arbitrary added ones are not overwritten when writing the next segment because of writing with a logical or.
This commit properly fills `f` and `f2` with zeros.
5. nr_ulschsim & nr_dlschsim: Adapt modulation to new encoder output
The QPSK symbols that are feed to the channel model of nr_dlschsim were determined based on the bytes of the encoder output.
With the new output of the encoder, it had to be reworked to determine the QPSK symbols based on the bits of the encoder output.
1. 3GPP Rate-matching/interleaving on 8-segment blocks, deinterleaving at output of multi-segment processing.
2. Bit-packing done in nrLDPC_coding_segment_encoder.c now instead of nr_scrambling.
Interestingly, it improves performance significantly too.
Tested for AVX512 only for now.
Avoid the use of simde_mm_sign_epi8 which is inefficient on aarch64.
Decoding times are significantly improved on aarch64.
Co-authored-by: Romain Beurdouche <romain.beurdouche@eurecom.fr>
Add --allowerasing, which will downgrades some packets in order to
satisfy LLVM dependencies.
When building the docker image for clang, CI fails with
Error:
Problem: llvm-18.1.8-3.el9.i686 from ubi-9-appstream-rpms does not belong to a distupgrade repository
- package llvm-toolset-18.1.8-3.el9.x86_64 from ubi-9-appstream-rpms requires llvm = 18.1.8, but none of the providers can be installed
- package llvm-18.1.8-3.el9.x86_64 from ubi-9-appstream-rpms requires llvm-libs(x86-64) = 18.1.8-3.el9, but none of the providers can be installed
- package llvm-18.1.8-3.el9.x86_64 from ubi-9-appstream-rpms requires libLLVM.so.18.1()(64bit), but none of the providers can be installed
- package llvm-18.1.8-3.el9.x86_64 from ubi-9-appstream-rpms requires libLLVM.so.18.1(LLVM_18.1)(64bit), but none of the providers can be installed
- cannot install both llvm-libs-18.1.8-3.el9.x86_64 from ubi-9-appstream-rpms and llvm-libs-19.1.7-2.el9.x86_64 from @System
- package mesa-dri-drivers-24.2.8-2.el9_6.x86_64 from @System requires libLLVM.so.19.1()(64bit), but none of the providers can be installed
- package mesa-dri-drivers-24.2.8-2.el9_6.x86_64 from @System requires libLLVM.so.19.1(LLVM_19.1)(64bit), but none of the providers can be installed
- package mesa-libGL-24.2.8-2.el9_6.x86_64 from @System requires libgallium-24.2.8.so()(64bit), but none of the providers can be installed
- package mesa-libGL-24.2.8-2.el9_6.x86_64 from @System requires libgallium-24.2.8.so(libgallium-24.2.8.so)(64bit), but none of the providers can be installed
- package mesa-libGL-devel-24.2.8-2.el9_6.x86_64 from @System requires mesa-libGL(x86-64) = 24.2.8-2.el9_6, but none of the providers can be installed
- conflicting requests
- problem with installed package mesa-libGL-devel-24.2.8-2.el9_6.x86_64
(try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
So when trying to install llvm-toolset from docker/Dockerfile.clang.rhel9,
we have a conflict because this installs 18.1 from ubi-9-appstream-rpms,
but various mesa packets have llvm 19.1.
1. I don't understand why we have mesa installed (no graphics system?)
2. --allowerasing downgrades the relevent mesa package(s)
Alternatively, we would need to select 19.1 when installing
llvm-toolset, but I don't know how to do that.
As per CUS spec, the MTU can be 1500 or 9000 B, where MTU = IQ data format.
Packet length = ethernet header + RTE_PKTMBUF_HEADROOM + MTU
However, xran assumes different definitions of the MTU:
(1) in xran_init_mbuf_pool(): MTU = ethernet header + IQ data format;
(2) in xran_get_num_prb_elm(), xran_init_PrbMap_from_cfg(), xran_init_PrbMap_from_cfg_for_rx(), xran_init_PrbMap_by_symbol_from_cfg(): MTU = complitely wrong (as the IQ data format is not well included).
Additionally, xran assumes that the max MTU 9600 B, instead of 9000 B as per spec.
Nevertheless, I left 9600 B in all config files and docs due to wrong calculation of (2) for the total number of PRBs per fragment.
1. Closes#884 - increase the XRAN_MAX_FRAGMENT from 4 to 6 (sufficient for MTU 1500 with compression 8b)
2. Add new firmware version that supports jumbo frames
3. Update the config file to align with the new Liteon unit in our lab - center frequency, jumbo frames, compression and RU MAC address,
as well as the max DL MIMO layers.
Add support for 'default' DNN to CN5G configuration file (that will also be used when DNN is not available, "empty" DNN). This configuration will allow most of the COTS UE to get PDUSession without any APN configuration made by the user
The 'default'/"empty" DNN configuration support was added in https://gitlab.eurecom.fr/oai/cn5g/oai-cn5g-amf/-/merge_requests/343
Integration: `2025.w19`
Closes#852, #952, and #957
See merge request oai/openairinterface5g!3427
* !3409 Correctly handle minimum RB condition in MAC
* !3421 Fix DMRS for PUCCH format 2
* !3424 limit the number of HARQ processes in case of DCI00 and 10
* !3116 ue txData more contextual, but still global as it is entangled with usrp driver
* !3408 Handling 2 search spaces per slot in SIB1
* !3419 PRACH configuration index warning
* !3429 CI: Add `-l` option for the UL iperf test
* !3381 Add 5GMM Authentication Failure enc/dec lib and unit test
CI: Add `-l` option for the UL iperf test
In this MR, we set the packet length to 1428 bytes for UL iperf3 testing using
the -l option to prevent packet fragmentation. Fragmentation is causing packet
drops between the gNB and the UPF, leading to failed UL throughput tests in CI.
Add 5GMM Authentication Failure enc/dec lib and unit test
This MR is introducing the 5GMM Authentication Failure message library as per
8.2.4 of 3GPP TS 24.501. This message is sent from UE to network under certain
conditions. The message is also introduced in stack and is send if the received
ngKSI already in use.
- add new library for 5GMM Authentication Failure enc/dec and unit test
- introduce handler and generate function for NAS Authentication Failure
store ngKSI
- send Authentication Failure if ngKSI is already associated with one of
the 5G security contexts stored in the UE
Closes#852
After capturing the FH packets, we observed that the RU supports the MTU value for jumbo frames.
Therefore, no fragmentation needed on DL.
Co-authored-by: Teodora Vladic <teodora.vladic@openairinterface.org>
ue txData more contextual, but still global as it is entangled with usrp driver
- txData buffer is global and entangled even in usrp oai driver because of tx
thread feature
- it also makes weird combination with continuous tx usrp bug workaround
- this MR makes most of the calls contextual but keep the globakl txData
- later a MR should remove the global and tackle it with proper context, but we
need to modify gNb, UE, 4G and probably all oai drivers
Fix DMRS for PUCCH format 2
This MR fixes the DMRS for PUCCH format 2.
While at the OAI-UE we have:
uint16_t startingPRB = pucch_pdu->prb_start + pucch_pdu->bwp_start;
uint idxGold = startingPRB >> 2;
uint32_t *seq = gold_cache(temp_x2, idxGold + pucch_pdu->prb_size);
At gNB side, it was missing pucch_pdu->bwp_start, i.e., it was:
uint32_t *sGold = gold_cache(x2, pucch_pdu->prb_start / 4 + ngroup / 2);
uint8_t *sGold8 = (uint8_t *)(sGold + pucch_pdu->prb_start / 4);
This MR was tested with COTS UE with a bwp_start other than 0, and now PUCCH format 2 is being decoded correctly.
Move this message down, at the end of the function, if no code path
exists under which msg3 allocation might fail despite this log having
been printed.
Assume the minimum grant (min_rb) size to be the bandwidth part size. As
an example: rbStart 0, min_rb=bwpSize=106. This should pass, hence
modify these two conditions.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
The functions nr_generate_csi_rs() and nr_ue_generate_csi_rs() are
identical. This commit removes nr_ue_generate_csi_rs() and moves
nr_generate_csi_rs() to nr_phy_common_csirs.c so both gNB and UE can use
the same function.
Integration: `2025.w18`
Closes#953
See merge request oai/openairinterface5g!3413
* !3385 Add enc/dec lib for E1 Bearer Context Setup Failure
* !3410 Avoid segmentation fault when testing trigger reestablishment and there is no DRB[0] established
* !3411 Remove assert for SRI-PUSCH-PowerControl
* !3291 Improvements in handling UE context in gNB DU
* !3416 Signal gNB-DU config update CellStatus from DU to CU
* patch to fix memory leak on DRB_ToAddModList
* update phytest-timing thresholds
Signal gNB-DU config update CellStatus from DU to CU
Add the cell status to gNB-DU configuration update message, including
test. Use the gNB-DU configuration update to signal the cell status in
the stack.
This IE was not included in a previous refactoring round, but is at
least necessary to be decoded when interoperating with the OSC O-DU.
Improvements in handling UE context in gNB DU
The goal of this MR is to improve the handling of UE context in gNB DU.
To achieve this goal, the UE structure is created as soon as the gNB
receive a PRACH indication. At that stage the UE is placed in a new
structure containing UEs performing RA, untill RA is complete where it
is moved to the list of connected UEs. To simplify the code and to
improve the handling of initial procedures (see #751), DCI 10 and DCI 00
is used at every stage until the DU receives from CU the indication of
UE RRC reconfiguration being completed.
Remove assert for SRI-PUSCH-PowerControl
SRI-PUSCH-PowerControl is not implemented at this point but its enough
to warn about incorrect power control behavior rather than assert on the
configuration.
Closes#953
This is preparatory work to allow NSA-like modes to be used over F1 in
the future. Notably, it fills the F1 message for UE context setup with
GTP TEID, and fills additional information to "make the F1 encoder
happy" (fill in QFI etc). Also, provide some F1 fixes to make this work.
Remove stale UE connections, if relevant.
sdap_tun_read_thread needs to know if we are gNB/UE. Previously, we
passed this into the thread, but the next commit also needs to for
interface termination, where this info is not available. So, for noS1
mode, pass this in.
Add functionality to trigger the addition of a new RRC UE context (in
the CU) for NSA modes, using F1. This commit makes do-ra and phy-test
modes work. "True" NSA will work in the next commit, which also sends
the X2 addition request answer message.
Use the gNB-DU configuration update to signal the cell status in the
stack. At the DU, modify the code to always send this message --
previously, we only sent this message if a SIB1 update was necessary,
but now it's always, only including SIB1 updates if necessary.
At the CU, as we don't really have a use as of now, print the
information, but don't do anything with it.
Add enc/dec lib for E1 Bearer Context Setup Failure
This MR is adding:
- the enc/dec library
- unit test
- handler and callback in stack
For the E1 Bearer Context Setup Failure.
- rewrite add_UE_to_list() and rewrite remove_UE_from_list() to simplify
list handling
- return pointer from get_new_nr_ue_inst(); it's completely freed by
delete_nr_ue_data()
- have add_new_UE_RA() add UE context to access list; remove with
nr_release_ra_UE()
- have add_connected_nr_ue() only add UE to connected list; to move from
access to connected use transition_ra_connected_nr_ue(); remove with
mac_remove_nr_ue() as previously
- free memory on problems during RA
- add some documentation
- in NSA/HO: check for pre-configured RA process
- there are asserts in all functions to clarify when a UE has RA
In phy-test and do-ra modes, we will trigger a UE context creation after
F1 Setup (because the DU is ready), in a later commit. However, before
this commit, E1 is started after the gnb_app (which triggers F1 Setup).
E1 starts an (integrated) CU-UP; if the E1 Setup arrives after the F1
setup (which creates a UE context), then the E1 setup handler will drop
the newly created RRC context for a do-ra/phy-test mode.
Avoid/minimize this by starting E1 first, so that E1 setup is done
before F1 Setup is completed (this does not make sure the problem does
not happen, but lowers the risk of the above problem).
SRI-PUSCH-PowerControl is not implemented at this point but its enough
to warn about incorrect power control behavior rather than assert on the
configuration.
This commit does not introduce the callback on the CU-UP to trigger
a Bearer Context Setup Failure when the setup of the bearer context was unsuccessful.
This should be handled properly in the stack e.g. in e1_bearer_context_setup (a comment
in the code says "We assume all DRBs to setup have been setup successfully, so we always
send successful outcome in response and no failed DRBs")
Integration: `2025.w17`
Closes#947
See merge request oai/openairinterface5g!3403
* !3377 Fix all direct MAC memory leaks
* !3397 Fix for MIB/SIB gNB delay mechanism
* !3399 SIBs in DL slot check
* !3401 F1AP: Allocate gNB_DU_ID before storing ID
* !3380 Issue 947 and compilation improvements
* !3391 small bugfix for T tracer
* !3261 Add Bearer Context Modification Request/Response enc/dec lib and adopt in stack
* !3178 mod: refactor PHY multiplications
* !3382 Improve radio for Metanoia RU (and likely others)
* !3388 Update CN5G images tags to the latest release in all CI pipelines
* !3351 Fix ASN1 struct double free
* !3405 Fix for NR UE DLSCH decoding barrier in case of no feedback
* !3404 Polar: remove dead code and a wrong comment
Polar: remove dead code and a wrong comment
a file code duplicated and no more used a comment is wrong:
uint16_t x = INFINITY; is wrong, the gcc comment is true
uint16_t x= INFINITY; sets x=-32768 because it is truncature of 0x7FFFFF
add SIMD for the top lines when i run polartest
Fix for NR UE DLSCH decoding barrier in case of no feedback
In !3291 NTN CI RFsim test fails with the UE being stuck. After some
investigation, this seems to be caused by the scenario where there is no
feedback for DLSCH. In that case there is no need to wait for DLSCH
being completed before generating feedback (there is no feedback).
Fix ASN1 struct double free
When paging, RA and other SI have same PDCCH search space, we should
free the struct once and reset the other pointers to NULL.
Update CN5G images tags to the latest release in all CI pipelines
This MR is updating the tags of the CN5G docker images to the latest
release v2.1.9, for all CI pipelines.
Improve radio for Metanoia RU (and likely others)
We introduced a regression that lowered the achievable DL throughput
with at least the Metanoia RU (i.e., in the configuration and the UE
that we use). git bisect showed up one commit, which does not seem
necessary. We just revert this commit, as it improves the throughput and
does not seem to have a negative impact on performance.
Further, increase RLC buffers a bit. Limit 7.2 pipeline number of layers
to 2.
With PMI reporting working (see HEAD^^), it seems that four layers put
two much processing strain on the machine (cacofonix), which asserts
immediately. In tests, it was found that the same test throughput
(600Mbps) can be achieved with two layers, while not crashing the
machine.
The UE stores PDCCH search spaces from the network in NR_BWP_PDCCH_t
struct within NR_UE_MAC_INST_t. After storing, the pointers otherSI_SS,
ra_SS and paging_SS are updated to point to the stored SS. Multiple
pointers could point to the same stored SS struct depending on
configuration. Then when the UE wants to release the SS, the pointers
are used to free the stored SS using ASN_STRUCT_RESET(). If multiple
pointers point to the same SS, calling ASN_STRUCT_RESET() on all
pointers would lead to double free. So one needs to check for dangling
pointer before freeing.
Instead of using pointers and assigning them during configuration, we
use SS id for otherSI_SS, ra_SS and paging_SS to retrieve the pointers
whenever needed. When the UE wants to release the SS, we make them -1
indicating an invalid SS id.
Add Bearer Context Modification Request/Response enc/dec lib and adopt in stack
This MR is introducing the Bearer Context Modification Response enc/dec
library with relative unit test, and it is also adopting it in the
stack. Also:
- Refactor Security Information IE decoding function
- Adopt Bearer Context Modification Request lib in stack (introduced in
!3219 (merged))
small bugfix for T tracer
small bugfix: missing beam index when addressing txdataF in T tracer
command. Also changed order of if(gNB->phase_comp) so that data is
exported in any case.
Issue 947 and compilation improvements
This MR started with a small commit (03c7f151) to close#947. Little did
I know that I would be taken in a long journey through OAI compilation
hell.
F1AP: Allocate gNB_DU_ID before storing ID
Update the test so it would catch that bug. Check in eq_() that both
gNB_DU_IDs would be present, or not, using xor.
Found while interop testing with OSC DU.
Fix all direct MAC memory leaks
This MR fixes many memory leaks in the MAC that are otherwise shown by
asan if the gNB is started. UEs can be connected and it seems the MAC
does not leak memory. It also fixes a number of memory problems where
e.g., the generation of SIB1 "steals" memory from the
ServingCellConfigCommon. See the commits for more details.
Note that this still leaves behind a lot of memory after calling the new
function mac_top_destroy_gNB(). To see them, add free(mac); in that
function. However, there are no "direct leaks", so it would be feasible
to still clean up (it's just that we don't do it, yet).
I checked. In a "standard" configuration (FR1, 30kHz), the memory leaks
come basically from RRC. Also, the F1 UE context setup message leaks
some memory, which we will handle in the future by adding
encoding/decoding functions that with corresponding utility (free, copy)
functions. On the other hand, the frequent F1 messages (UL/DL RRC
Message Transfer) do not leak memory (they have the utility functions).
A final commit just makes the inability to write nrRRC_stats.log,
nrL1_stats.log, and nrMAC_stats.log, non-fatal to the gNB.
Pass a "type" of RLC operational mode, from which split-type/gNB/UE
decision is derived.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
prepare_scd() sets up memory for possible dedicated BWPs to be set up.
If they are not used, they are freed in fix_scd(). [1]
There are two problems:
1. in prepare_scd(), multiple structures are allocated once (for
multiple elements), but inserted once. When trying to free those, the
logic of ASN.1 is to free list elements individually, but then we try
to call free() on each element of the list that has been allocated in
one go. Fix this by doing multiple allocations to be in line with
ASN.1 logic.
2. in fix_scd(), free recursively all data structures, not only the
sequence element itself.
[1] this is horrible. We should only allocate memory if we actually need
it, but let's fix the more urgent problem of memory leaks first. Fixing
the logic problem would be more involved.
Integration: `2025.w16`
Closes#949, #929, and #941
See merge request oai/openairinterface5g!3392
* !3207 Create nrUE network interface from SDAP (rebased)
* !3293 Cleanup and refactor initial gNB configuration
* !3326 Enable SSB-SINR based CSI reporting
* !3330 NR UE: consider the ratio of PUSCH EPRE to DMRS EPRE when calculating PUSCH DMRS power scaling
* !3376 Correct block_length to Kprime for LDPC decoder
* !3390 fix IP address in 4G UE
* !3071 time management module
* !3254 Follow up on NAS Registration Accept lib
* !3121 Bugfix for number of PRBs in PUCCH format 2
* !3387 fix NTN LEO scenario
* !3393 rejecting DRB if not configured in PDCP-Config
* !3372 Add Delay Mechanism for Initial MIB/SIB Transmission in gNB Scheduler
fix NTN LEO scenario
NR UE: in nr_slot_fep() perform FO compensation in local tmp_dft_in
array instead of global rxdata array.
This avoids problems if nr_slot_fep() is called more than once for an
OFDM symbol.
Add Delay Mechanism for Initial MIB/SIB Transmission in gNB Scheduler
- Delay MIB/SIB in gNB until PRACH noise converges
- Remove the first PRACH random access attempt delay in NR UE
Bugfix for number of PRBs in PUCCH format 2
[TS 38.213 - Section 9.2.1 PUCCH Resource Sets] If the format indicates
PUCCH-format2 or PUCCH-format3, the PUCCH format configured for a PUCCH resource
is PUCCH format 2 or PUCCH format 3, respectively, where the PUCCH resource also
includes a number of PRBs provided by nrofPRBs, a number of symbols for a PUCCH
transmission provided by nrofSymbols, and a first symbol for the PUCCH
transmission provided by startingSymbolIndex.
[TS 38.213 - Section 9.2.3 UE procedure for reporting HARQ-ACK] If a UE transmits
a PUCCH with O_ACK HARQ-ACK information bits and O_CRC bits using PUCCH format 2
or PUCCH format 3 in a PUCCH resource that includes M_PUCCH_RB PRBs, the UE
determines a number of PRBs M_PUCCH_RB_min for the PUCCH transmission to be the
minimum number of PRBs (...)
[TS 38.213 - Section 9.2.5.1 UE procedure for multiplexing HARQ-ACK or CSI and
SR in a PUCCH] If a UE transmits a PUCCH with O_ACK HARQ-ACK information bits,
O_SR = ⌈log2(K+1)⌉ SR bits, and O_CRC CRC bits using PUCCH format 2 or PUCCH
format 3 in a PUCCH resource that includes M_PUCCH_RB PRBs, the UE determines
a number of PRBs M_PUCCH_RB_min for the PUCCH transmission to be the minimum
number of PRBs (...)
[TS 38.213 - Section 9.2.5.2 UE procedure for multiplexing HARQ-ACK/SR/CSI in
a PUCCH] If a UE has HARQ-ACK, SR and wideband or sub-band CSI reports to
transmit and the UE determines a PUCCH resource with PUCCH format 2, or the UE
has HARQ-ACK, SR and wideband CSI reports to transmit and the UE determines a
PUCCH resource with PUCCH format 3 or PUCCH format 4, where (...) the UE
transmits the HARQ-ACK, SR, and CSI reports bits by selecting the minimum number
PUCCH M_PUCCH_RB_min of the M_PUCCH_RB PRBs satisfying (...)
[TS 38.213 - Section 9.2.5.2 UE procedure for multiplexing HARQ-ACK/SR/CSI in a
PUCCH] If a UE has one or more CSI reports and zero or more HARQ-ACK/SR
information bits to transmit in a PUCCH where the HARQ-ACK, if any, is in
response to a PDSCH reception without a corresponding PDCCH; if any of the CSI
reports are overlapping (...); else, the UE transmits the
O_ACK + O_SR + O_CSI + O_CRC bits in a PUCCH resource provided by
pucch-CSI-ResourceList and determined as described in clause 9.2.5
Therefore, the number of PRBs to be used by PUCCH-format2 is M_PUCCH_RB_min,
except if we have zero HARQ-ACK bits, or if we have any HARQ-ACK, is in response
to a PDSCH reception without a corresponding PDCCH. In this case, we must use
the resources indicated in the pucch-CSI-ResourceList and determined as described
in clause 9.2.5.
In OAI, we have:
asn1cSeqAdd(&csirep->reportConfigType.choice.periodic->pucch_CSI_ResourceList.list, pucchcsires);
Where the resource added to the list corresponds to:
pucchres2->pucch_ResourceId = *pucchressetid;
pucchres2->startingPRB = 0;
pucchres2->intraSlotFrequencyHopping = NULL;
pucchres2->secondHopPRB = NULL;
pucchres2->format.present = NR_PUCCH_Resource__format_PR_format2;
pucchres2->format.choice.format2 = calloc(1,sizeof(*pucchres2->format.choice.format2));
pucchres2->format.choice.format2->nrofPRBs = 8;
pucchres2->format.choice.format2->nrofSymbols = 1;
pucchres2->format.choice.format2->startingSymbolIndex = 13;
Currently, in develop branch, we get these prb_size for PUCCH-format2:
[NR_RRC] NGAP_PDUSESSION_SETUP_RESP: sending the message
[NGAP] pdusession_setup_resp_p: pdusession ID 1, gnb_addr 172.31.0.1, SIZE 4, TEID 1579669408
[NR_MAC] (596.3) pucch_pdu->prb_size = 4
[NR_MAC] (596.4) pucch_pdu->prb_size = 3
[NR_MAC] (600.3) pucch_pdu->prb_size = 4
[NR_MAC] (600.4) pucch_pdu->prb_size = 3
[NR_MAC] (604.3) pucch_pdu->prb_size = 4
[NR_MAC] (604.4) pucch_pdu->prb_size = 3
[NR_MAC] (608.3) pucch_pdu->prb_size = 4
While in QXDM we have Num RB = 8, whenever we have zero HARQ-ACK bits:
UCI Request BMask = ACK_NACK_RPT | CSI_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 2
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 1
Num SR Bits = 0
Num UCI P1 Bits = 8
UCI Request BMask = ACK_NACK_RPT | CSI_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 3
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 3
Num SR Bits = 0
Num UCI P1 Bits = 13
UCI Request BMask = CSI_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 8
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 0
Num SR Bits = 0
Num UCI P1 Bits = 10
UCI Request BMask = CSI_RPT | SR_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 8
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 0
Num SR Bits = 1
Num UCI P1 Bits = 11
Therefore, this MR fixes the prb_size, so that the number of PUCCH-format2 PRBs matches correctly.
Follow up on NAS Registration Accept lib
This MR is a follow up on !2984 (merged).
The goal is to enhance the NAS Registration Accept lib:
- Add regression test for NAS Registration Accept: the goal of this test is to
prevent on the decoding of the NAS Registration Accept sent by the OAI CN5G
- Add equality check and free utility functions to NAS Registration Accept
library
- Free NAS Registration Accept after use: heap memory is allocated for this
message during decoding and shall be free after processing
- Remove harcoded Slice Differentiator (SD) in NAS decode_nssai_ie and update
the processing logic: The SD stored in the allowed S-NSSAI list was hardcoded
in the decoding function, however this IE is not mandatory but optional.
Therefore, the check of the decoded message contents should take into account
the presence of the field in the received message and in that scenario, check
the stored value against the one from the UICC. If no SD was received, consider
the UICC SD a valid one.
- Cleanup and other fixes to decode_registration_accept: (1) adopt byte array
(2) move registration result enc/dec to registration accept library (3) check
on buffer lengths (4) add defines whenever necessary (5) simplify the code
Disable the PRACH workaround in NR UE. With the MIB/SIB delay
implemented on the gNB there is no longer a need to delay first
NR UE random access attempt.
This commit introduces a delay mechanism for the first MIB/SIB transmission
in the gNB scheduler to allow PRACH noise estimate to converge stabilize
before first PRACH preamble reception.
Key changes:
- Added the `num_scheduled_prach_rx` variable to gNB_MAC_INST to keep track
of total number scheduled of PRACH receptions. Using uint64_t type to avoid
overflow.
- Updated the `gNB_dlsch_ulsch_scheduler` function to conditionally schedule
MIB/SIB transmissions if `num_scheduled_prach_rx` is at least 100.
The value comes from OAIs implementation of PRACH noise estimate.
fix IP address in 4G UE
The following error was appearing when running LTE UE:
inet_pton(): cannot convert -64.-74.0.2 to IPv4 network address
The allocated address by the core actually is 192.182.0.2.
On my host "char" is signed, leading to the above error (192 and 182
are seen as signed).
Let's force "ip_addr" unsigned and everyone is happy.
Correct block_length to Kprime for LDPC decoder
When compile the OAI by CMake, it shows the following error:
../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_CL.c:353:40: error: no member named 'block_length' in 'struct nrLDPC_dec_params'
int block_length = p_decParams->block_length;
NR UE: consider the ratio of PUSCH EPRE to DMRS EPRE when calculating PUSCH
DMRS power scaling
When calculating DMRS scaling ratio, we should consider PUSCH EPRE to DMRS
EPRE according to TS 38.214 Table 6.2.2-1.
Close#929
Enable SSB-SINR based CSI reporting
3GPP 38.331 release 16 specifies that If the field reportQuantity-r16 is present,
UE shall ignore reportQuantity (without suffix). reportQuantity-r16 configures
SSB based SINR as the reporting quantity.
set do_SINR = 1; in gNB params part of the config file to enable SSB based SINR
reporting.
Cleanup and refactor initial gNB configuration
This is follow-up on !3048 (merged). Major changes in this MR:
- Add config functions to reduce redundant code repeated in multiple places in the file
- Add macros to reduce redundant code in gNB configuration
- Refactor RCconfig_NR_NG
- Cleanup obsolete and commented out code
- Refactor includes in executables/nr-gnb.c
- Introduce platform type plmn_id_t for consistency across the stack: F1AP, NGAP can now use the same struct type
- And other minor formatting
Create nrUE network interface from SDAP (rebased)
A rebase of !2485. Dropped a few refactors and SDAP manager changes.
Changes
1. Move tunnel interface read thread to SDAP for gNB (noS1) and UE (noS1 and SA).
2. Hold tunnel interface socket fd in SDAP entity instead of global variable.
3. Handle UE tunnel interface creation and IP configuration from NAS thread in noS1 and SA modes.
4. Modified UE tunnel interface naming scheme. Additional PDU sessions get oaitun_ue<id>p<pdusession_id>.
Closes#941
The following error was appearing when running LTE UE:
inet_pton(): cannot convert -64.-74.0.2 to IPv4 network address
The allocated address by the core actually is 192.182.0.2.
On my host "char" is signed, leading to the above error (192 and 182
are seen as signed).
Let's force "ip_addr" unsigned and everyone is happy.
This commit refactors the TUN interface management by moving its creation
and configuration from the PDCP layer to the SDAP layer for UE.
Key changes include:
- Introduced `tun_generate_ue_ifname` and `tun_destroy` functions for better
TUN interface lifecycle management.
- Added support for creating and destroying UE-specific TUN interfaces in SDAP.
- Refactored `nr_pdcp_module_init` to remove TUN-related logic and moved it
to SDAP.
- Updated NAS and SDAP layers to handle PDU session-specific TUN interface
creation and configuration.
- Enhanced SDAP entity management to include TUN socket handling and thread
lifecycle.
- Updated NAS message handling to initialize default PDU session TUN
interfaces in NOS1 mode.
- Use a single SDAP thread function for gNB and UE
- Allow noS1 mode also in SA on gNB
These changes improve modularity by isolating TUN interface management within
the SDAP layer, aligning with the 3GPP architecture, and simplifying the PDCP
layer.
Co-Authored-By: Robert Schmidt <robert.schmidt@openairinterface.org>
This test verifies that a NAS Registration Accept message, as received
from the OAI CN5G, is correctly decoded and matches the expected output
structure. It ensures that future changes to the NAS decoder do not
break compatibility or correctness with existing decoding behavior.
The SD stored in the allowed S-NSSAI list was hardcoded in the decoding
function, however this IE is not mandatory but optional, therefore
the check of the decoded message contents should take into account
this and check the stored value against the one from the UICC only when the field is present.
If no SD was received, consider the UICC SD a valid one.
Also, add free function to Registration Accept library and adopt in stack to free NAS
Registration Accept after use: heap memory is allocated for this message during decoding
and shall be free after processing.
3GPP 38.331 release 16 specifies that If the field reportQuantity-r16 is present, UE shall ignore reportQuantity (without suffix).
reportQuantity-r16 configures SSB based SINR as the reporting quantity.
set do_SINR = 1; in gNB params part of the config file to enable SSB based SINR reporting instead of the default RSRP based.
Replaced `sprintf` with `snprintf` in gnb_config.c to enhance memory safety
by preventing potential buffer overflows. `sprintf` can cause buffer overflows
by not checking the destination buffer size. In contrast, `snprintf` allows
specifying a maximum buffer size, ensuring no overflow occurs by limiting
the number of characters written, including the null terminator.
The Bearer Context Modification Request test is adding 1 QoS Flow, therefore the encoding/decoding
is done and this bug does not show. The issue is there when no QoS Flow is mapped in the DRBnGRanModList,
therefore when no memory is allocated for the optional IE, and the member is accessed in the decoding
of the Flow Mapping Information.
# Declare variables to be passed into your templates.
replicaCount:1
image:
# pullPolicy: IfNotPresent or Never or Always
pullPolicy:Always
imagePullSecrets:[]
nameOverride:""
fullnameOverride:""
serviceAccount:
# Specifies whether a service account should be created
create:true
# Annotations to add to the service account
annotations:{}
# The name of the service account to use.
# If not set and create is true, a name is generated using the fullname template
name:"oai-smallblocktest-sa"
podSecurityContext:
runAsUser:0
runAsGroup:0
securityContext:
privileged:false
resources:{}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
# resources, such as Minikube. If you do want to specify resources, uncomment the following
# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
# limits:
# cpu: 100m
# memory: 128Mi
# requests:
# cpu: 100m
# memory: 128Mi
nodeSelector:{}
tolerations:[]
affinity:{}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
