integrate OXGRF into OAI

cmake_targets/build_oai

@@ -89,7 +89,7 @@ Options:
 --UE-conf-nvram [configuration file]
    Specify conf_nvram_path (default \"$conf_nvram_path\")
 -w | --hardware
-   USRP, BLADERF, LMSSDR, IRIS, SIMU, AW2SORI, AERIAL, None (Default)
+   USRP, BLADERF, LMSSDR, IRIS, SIMU, AW2SORI, AERIAL, OXGRF, None (Default)
    Adds this RF board support (in external packages installation and in compilation)
 -t | --transport
    Selects the transport protocol type, options: None, Ethernet, oran_fhlib_5g, oran_fhlib_5g_mplane, WLS
@@ -246,7 +246,7 @@ function main() {
             shift 2;;
        -w | --hardware)
             case "$2" in
-                "USRP" | "BLADERF" | "LMSSDR" | "IRIS")
+                "USRP" | "BLADERF" | "LMSSDR" | "IRIS" | "OXGRF")
                     HW="OAI_"$2
                     TARGET_LIST="$TARGET_LIST oai_${2,,}devif" # ,, makes lowercase
                     CMAKE_CMD="$CMAKE_CMD -DOAI_$2=ON"
@@ -431,6 +431,10 @@ function main() {
         flash_firmware_bladerf
       fi
     fi
+    if [ "$HW" == "OAI_OXGRF" ] ; then
+      echo_info "installing packages for OXGRF support"
+      check_install_oxgrf_driver
+    fi
     if [ "$HW" == "OAI_IRIS" ] ; then
       echo_info "installing packages for IRIS support"
       check_install_soapy

cmake_targets/tools/build_helper

@@ -330,6 +330,32 @@ install_usrp_uhd_driver() {
     fi
 }
 
+check_install_oxgrf_driver() {
+    if modinfo xdma > /dev/null 2>&1
+    then
+      echo_success "OXGRF driver has loaded."
+    else
+      git clone https://github.com/openxg-prog/oxgrf_driver /tmp/oxgrf_driver
+      if [ $? -ne 0 ]; then
+        echo_fatal "OXGRF driver download failed, please check your net connection."
+      else
+        cd /tmp/oxgrf_driver/XDMA/linux-kernel/xdma
+        make && $SUDO make install
+        echo_success "OXGRF driver install success, please restart your PC later."
+      fi
+      git clone -b 2505 https://github.com/openxg-prog/liboxgrf /tmp/liboxgrf
+      if [ $? -ne 0 ]; then
+        echo_fatal "OXGRF API download failed, please check your net connection."
+      else
+        cd /tmp/liboxgrf
+        cp oxgrf_api.h /usr/local/include/
+	cp liboxgrf.so /usr/local/lib/
+        $SUDO ldconfig
+        echo_success "OXGRF API install success, please restart your PC later."
+      fi
+    fi
+}
+
 install_bladerf_driver_from_source(){
     echo_info "\nInstalling BladeRF driver from sources."
     cd /tmp

executables/lte-ru.c

@@ -765,7 +765,7 @@ void tx_rf(RU_t *ru,
    VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0);
 
    //    AssertFatal(txs ==  siglen+sf_extension,"TX : Timeout (sent %d/%d)\n",txs, siglen);
-   if (usrp_tx_thread == 0 && (txs != siglen + sf_extension)
+   if (usrp_tx_thread == 0 && oxgrf_tx_thread == 0 && (txs != siglen + sf_extension)
        && (late_control == STATE_BURST_NORMAL)) { /* add fail safe for late command */
      late_control = STATE_BURST_TERMINATE;
      LOG_E(PHY, "TX : Timeout (sent %d/%d) state =%d\n", txs, siglen, late_control);
@@ -1588,7 +1588,7 @@ static void *ru_thread( void *param ) {
   pthread_cond_signal(&proc->cond_FH1);
   AssertFatal((ret=pthread_mutex_unlock(&proc->mutex_FH1))==0,"mutex_unlock returns %d\n",ret);
 
-  if(usrp_tx_thread == 1){
+  if(usrp_tx_thread == 1 || oxgrf_tx_thread == 1){
      if (ru->start_write_thread){
         if(ru->start_write_thread(ru) != 0){
             LOG_E(HW,"Could not start tx write thread\n");

executables/lte-softmodem.h

@@ -71,6 +71,7 @@
 #define CONFIG_HLP_PRB           "Set the PRB, valid values: 6, 25, 50, 100  \n"
 #define CONFIG_HLP_DLSHIFT       "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
 #define CONFIG_HLP_USRP_ARGS     "set the arguments to identify USRP (same syntax as in UHD)\n"
+#define CONFIG_HLP_OXGRF_ARGS   "set the arguments to identify OXGRF\n"
 #define CONFIG_HLP_DMAMAP        "use DMA memory mapping\n"
 #define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
 
@@ -94,6 +95,7 @@
     {"r"  ,               CONFIG_HLP_PRB,         0,               .u8ptr=&(frame_parms[0]->N_RB_DL),   .defintval=25,         TYPE_UINT8,    0},   \
     {"dlsch-demod-shift", CONFIG_HLP_DLSHIFT,     0,               .iptr=(int32_t *)&dlsch_demod_shift, .defintval=0,          TYPE_INT,      0},   \
     {"usrp-args",         CONFIG_HLP_USRP_ARGS,   0,               .strptr=&usrp_args,         .defstrval="type=b200",TYPE_STRING,   0},   \
+    {"oxgrf-args",       CONFIG_HLP_OXGRF_ARGS, 0,               .strptr=&oxgrf_args,       .defstrval="dev=pciex:0",TYPE_STRING,   0},   \
     {"mmapped-dma",       CONFIG_HLP_DMAMAP,      PARAMFLAG_BOOL,  .uptr=&mmapped_dma,                  .defintval=0,          TYPE_INT,      0},   \
     {"T" ,                CONFIG_HLP_TDD,         PARAMFLAG_BOOL,  .iptr=&tddflag,                      .defintval=0,          TYPE_INT,      0},   \
     {"ue-idx-standalone", NULL,                   0,               .u16ptr=&ue_idx_standalone,          .defuintval=0xFFFF,    TYPE_UINT16,   0},   \
@@ -129,6 +131,7 @@ extern double cpuf;
 
 extern int numerology;
 extern int usrp_tx_thread;
+extern int oxgrf_tx_thread;
 
 // In lte-enb.c
 extern void stop_eNB(int);

executables/lte-uesoftmodem.c

@@ -144,6 +144,8 @@ int transmission_mode=1;
 char *usrp_args=NULL;
 char *usrp_clksrc=NULL;
 
+char *oxgrf_args=NULL;
+
 THREAD_STRUCT thread_struct;
 /* struct for ethernet specific parameters given in eNB conf file */
 eth_params_t *eth_params;
@@ -406,6 +408,7 @@ static void init_openair0(LTE_DL_FRAME_PARMS *frame_parms, int rxgain)
     }
 
     if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
+    if (oxgrf_args) openair0_cfg[card].sdr_addrs = oxgrf_args;
   }
 }
 

executables/nr-ru.c

@@ -1121,7 +1121,7 @@ void *ru_thread(void *param)
 
   LOG_I(PHY, "RU %d RF started cpu_meas_enabled %d\n", ru->idx, cpu_meas_enabled);
   // start trx write thread
-  if (usrp_tx_thread == 1) {
+  if (usrp_tx_thread == 1 || oxgrf_tx_thread == 1) {
     if (ru->start_write_thread) {
       if (ru->start_write_thread(ru) != 0) {
         LOG_E(HW, "Could not start tx write thread\n");

executables/nr-softmodem-common.h

@@ -84,12 +84,15 @@
 
 #define CONFIG_HLP_NUMEROLOGY    "adding numerology for 5G\n"
 #define CONFIG_HLP_EMULATE_RF    "Emulated RF enabled(disable by defult)\n"
+#define CONFIG_HLP_OXGRF_THREAD "having extra thead for oxgrf tx\n"
 #define CONFIG_HLP_USRP_THREAD   "having extra thead for usrp tx\n"
 #define CONFIG_HLP_DISABLNBIOT   "disable nb-iot, even if defined in config\n"
 #define CONFIG_HLP_USRP_ARGS     "set the arguments to identify USRP (same syntax as in UHD)\n"
 #define CONFIG_HLP_TX_SUBDEV     "set the arguments to select tx_subdev (same syntax as in UHD)\n"
 #define CONFIG_HLP_RX_SUBDEV     "set the arguments to select rx_subdev (same syntax as in UHD)\n"
 
+#define CONFIG_HLP_OXGRF_ARGS   "set the arguments to identify OXGRF\n"
+
 #define CONFIG_HLP_FLOG          "Enable online log \n"
 #define CONFIG_HLP_LOGL          "Set the global log level, valid options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))\n"
 #define CONFIG_HLP_LOGV          "Set the global log verbosity \n"
@@ -134,5 +137,6 @@ extern double cpuf;
 
 extern int numerology;
 extern int usrp_tx_thread;
+extern int oxgrf_tx_thread;
 void wait_gNBs(void);
 #endif

executables/nr-softmodem.h

@@ -25,6 +25,7 @@
   {"T" ,                    CONFIG_HLP_ULBW_PHYTEST,   0,                .uptr=&target_ul_bw,                 .defintval=0,                     TYPE_UINT,   0},        \
   {"D" ,                    CONFIG_HLP_DLBM_PHYTEST,   0,                .u64ptr=&dlsch_slot_bitmap,          .defintval=0,                     TYPE_UINT64, 0},        \
   {"U" ,                    CONFIG_HLP_ULBM_PHYTEST,   0,                .u64ptr=&ulsch_slot_bitmap,          .defintval=0,                     TYPE_UINT64, 0},        \
+  {"sdr-tx-thread-config",  CONFIG_HLP_OXGRF_THREAD,  0,                .iptr=&oxgrf_tx_thread,             .defstrval=0,                     TYPE_INT,    0},        \
   {"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD,    0,                .iptr=&usrp_tx_thread,               .defstrval=0,                     TYPE_INT,    0},        \
   {"uecap_file",            CONFIG_HLP_UECAP_FILE,     0,                .strptr=&uecap_file,                 .defstrval="./uecap_ports1.xml",  TYPE_STRING, 0},        \
 }

executables/nr-ue.c

@@ -925,7 +925,7 @@ void *UE_thread(void *arg)
   UE->is_synchronized = 0;
   int tmp2 = UE->rfdevice.trx_start_func(&UE->rfdevice);
   AssertFatal(tmp2 == 0, "Could not start the device\n");
-  if (usrp_tx_thread == 1)
+  if (usrp_tx_thread == 1 || oxgrf_tx_thread == 1)
     UE->rfdevice.trx_write_init(&UE->rfdevice);
 
   InitSinLUT();

executables/nr-uesoftmodem.c

@@ -279,6 +279,8 @@ void init_openair0(PHY_VARS_NR_UE *ue)
       cfg->tx_subdev = get_nrUE_params()->tx_subdev;
     if (get_nrUE_params()->rx_subdev)
       cfg->rx_subdev = get_nrUE_params()->rx_subdev;
+    if (get_nrUE_params()->oxgrf_args)
+      cfg->sdr_addrs = get_nrUE_params()->oxgrf_args;
   }
 }
 

executables/nr-uesoftmodem.h

@@ -46,6 +46,7 @@ extern uint16_t ue_id_g;
 // clang-format off
 #define CMDLINE_NRUEPARAMS_DESC {  \
   {"usrp-args",                CONFIG_HLP_USRP_ARGS,           0,               .strptr=&nrUE_params.usrp_args,           .defstrval="type=b200",          TYPE_STRING,   0}, \
+  {"oxgrf-args",              CONFIG_HLP_OXGRF_ARGS,         0,               .strptr=&nrUE_params.oxgrf_args,         .defstrval="dev=pciex:0",        TYPE_STRING,   0}, \
   {"tx_subdev",                CONFIG_HLP_TX_SUBDEV,           0,               .strptr=&nrUE_params.tx_subdev,           .defstrval=NULL,                 TYPE_STRING,   0}, \
   {"rx_subdev",                CONFIG_HLP_RX_SUBDEV,           0,               .strptr=&nrUE_params.rx_subdev,           .defstrval=NULL,                 TYPE_STRING,   0}, \
   {"dlsch-parallel",           CONFIG_HLP_DLSCH_PARA,          0,               .u8ptr=NULL,                              .defintval=0,                    TYPE_UINT8,    0}, \
@@ -113,6 +114,7 @@ typedef struct {
   int cont_fo_comp;
   int agc;
   char *usrp_args;
+  char *oxgrf_args;
   char *tx_subdev;
   char *rx_subdev;
   char *reconfig_file;

executables/softmodem-common.c

@@ -44,6 +44,7 @@
 char *parallel_config=NULL;
 char *worker_config=NULL;
 int usrp_tx_thread = 0;
+int oxgrf_tx_thread = 0;
 uint8_t nfapi_mode=0;
 
 static struct timespec start;

executables/softmodem-common.h

@@ -99,10 +99,12 @@ extern "C"
 #define CONFIG_HLP_PARALLEL_CMD  "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
 #define CONFIG_HLP_WORKER_CMD    "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
 #define CONFIG_HLP_USRP_THREAD   "having extra thead for usrp tx\n"
+#define CONFIG_HLP_OXGRF_THREAD "having extra thead for oxgrf tx\n"
 
 #define CONFIG_HLP_NOS1          "Disable s1 interface\n"
 #define CONFIG_HLP_RFSIM         "Run in rf simulator mode\n"
 #define CONFIG_HLP_DISABLNBIOT   "disable nb-iot, even if defined in config\n"
+#define CONFIG_HLP_OXGRF_THREAD "having extra thead for oxgrf tx\n"
 #define CONFIG_HLP_USRP_THREAD   "having extra thead for usrp tx\n"
 #define CONFIG_HLP_NFAPI         "Change the nFAPI mode for NR 'MONOLITHIC', 'PNF', 'VNF', 'AERIAL','UE_STUB_PNF','UE_STUB_OFFNET','STANDALONE_PNF'\n"
 #define CONFIG_HLP_CONTINUOUS_TX "perform continuous transmission, even in TDD mode (to work around USRP issues)\n"
@@ -142,6 +144,7 @@ extern "C"
 
 #define DEFAULT_RFCONFIG_FILE    "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
 
+extern int oxgrf_tx_thread;
 extern int usrp_tx_thread;
 // clang-format off
 #define CMDLINE_PARAMS_DESC {  \
@@ -169,6 +172,7 @@ extern int usrp_tx_thread;
   {"chest-time",            CONFIG_HLP_CHESTTIME,     0,              .iptr=&CHEST_TIME,                      .defintval=0,             TYPE_INT,    0},  \
   {"nsa",                   CONFIG_HLP_NSA,           PARAMFLAG_BOOL, .iptr=&NSA,                             .defintval=0,             TYPE_INT,    0},  \
   {"node-number",           NULL,                     0,              .u16ptr=&NODE_NUMBER,                   .defuintval=0,            TYPE_UINT16, 0},  \
+  {"sdr-tx-thread-config",  CONFIG_HLP_OXGRF_THREAD, 0,              .iptr=&oxgrf_tx_thread,                .defstrval=0,             TYPE_INT,    0},  \
   {"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD,   0,              .iptr=&usrp_tx_thread,                  .defstrval=0,             TYPE_INT,    0},  \
   {"nfapi",                 CONFIG_HLP_NFAPI,         0,              .strptr=NULL,                           .defstrval="MONOLITHIC",  TYPE_STRING, 0},  \
   {"non-stop",              CONFIG_HLP_NONSTOP,       PARAMFLAG_BOOL, .iptr=&NON_STOP,                        .defintval=0,             TYPE_INT,    0},  \
@@ -211,6 +215,7 @@ extern int usrp_tx_thread;
     { .s5 = { NULL } },                     \
     { .s5 = { NULL } },                     \
     { .s5 = { NULL } },                     \
+    { .s5 = { NULL } },                     \
     { .s3a = { config_checkstr_assign_integer, \
                {"MONOLITHIC", "PNF", "VNF", "AERIAL","UE_STUB_PNF","UE_STUB_OFFNET","STANDALONE_PNF"}, \
                {NFAPI_MONOLITHIC, NFAPI_MODE_PNF, NFAPI_MODE_VNF, NFAPI_MODE_AERIAL,NFAPI_UE_STUB_PNF,NFAPI_UE_STUB_OFFNET,NFAPI_MODE_STANDALONE_PNF}, \
@@ -346,6 +351,7 @@ char *get_softmodem_function(void);
 void set_softmodem_sighandler(void);
 extern uint64_t downlink_frequency[MAX_NUM_CCs][4];
 extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
+extern int oxgrf_tx_thread;
 extern int usrp_tx_thread;
 extern int sf_ahead;
 extern int oai_exit;

openair1/PHY/impl_defs_top.h

@@ -43,6 +43,7 @@
  * @defgroup _GENERIC_PHY_RF_INTERFACE_ Generic PHY - RF Interface
  * @defgroup _USRP_PHY_RF_INTERFACE_    PHY - USRP RF Interface
  * @defgroup _BLADERF_PHY_RF_INTERFACE_    PHY - BLADERF RF Interface
+ * @defgroup _OXGRF_PHY_RF_INTERFACE_    PHY - OXGRF RF Interface
  * @defgroup _LMSSDR_PHY_RF_INTERFACE_    PHY - LMSSDR RF Interface
  * @}
  * @}

radio/CMakeLists.txt

@@ -47,3 +47,8 @@ add_boolean_option(OAI_RF_EMULATOR ON "Activate OAI's RF emulator" OFF)
 if(OAI_RF_EMULATOR)
   add_subdirectory(emulator)
 endif()
+
+add_boolean_option(OAI_OXGRF OFF "Activate OAI's OXGRF driver" OFF)
+if(OAI_OXGRF)
+  add_subdirectory(OXGRF)
+endif()

radio/COMMON/common_lib.c

@@ -45,7 +45,7 @@
 
 #define MAX_GAP 100ULL
 const char *const devtype_names[MAX_RF_DEV_TYPE] =
-    {"", "USRP B200", "USRP X300", "USRP N300", "USRP X400", "BLADERF", "LMSSDR", "IRIS", "No HW", "UEDv2", "RFSIMULATOR"};
+    {"", "USRP B200", "USRP X300", "USRP N300", "USRP X400", "BLADERF", "OXGRF", "LMSSDR", "IRIS", "No HW", "UEDv2", "RFSIMULATOR"};
 
 const char *get_devname(int devtype) {
   if (devtype < MAX_RF_DEV_TYPE && devtype !=MIN_RF_DEV_TYPE )

radio/COMMON/common_lib.h

@@ -93,6 +93,8 @@ typedef enum {
   USRP_X400_DEV,
   /*!\brief device is BLADE RF*/
   BLADERF_DEV,
+  /*!\brief device is OXGRF pcie*/
+  OXGRF_DEV,
   /*!\brief device is LMSSDR (SoDeRa)*/
   LMSSDR_DEV,
   /*!\brief device is Iris */

radio/OXGRF/CMakeLists.txt

@@ -0,0 +1,9 @@
+find_library(oxgrf NAMES oxgrf)
+
+add_library(oai_oxgrfdevif MODULE oxgrf_lib.c)
+target_link_libraries(oai_oxgrfdevif PRIVATE oxgrf)
+target_link_libraries(oai_oxgrfdevif PRIVATE UTIL)
+set_target_properties(oai_oxgrfdevif PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR})
+add_custom_command(TARGET oai_oxgrfdevif POST_BUILD
+                   COMMAND ${CMAKE_COMMAND} -E create_symlink liboai_oxgrfdevif.so liboai_device.so
+                   WORKING_DIRECTORY ${CMAKE_BINARY_DIR})

radio/OXGRF/README.md

@@ -0,0 +1,81 @@
+[[_TOC_]]
+
+# OXGRF
+
+## Build drivers
+
+There are two methods to build OXGRF, as detailed below:
+
+- using `build_oai` script
+
+```bash
+sudo ./build_oai -I -w oxgrf
+```
+
+- Manual Installation
+
+```bash
+# install drivers
+git clone https://github.com/openxg-prog/oxgrf_driver /tmp/oxgrf_driver
+cd /tmp/oxgrf_driver/XDMA/linux-kernel/xdma
+make && sudo make install
+
+# install liboxgrf
+git clone -b 2505 https://github.com/openxg-prog/liboxgrf /tmp/liboxgrf
+cd /tmp/liboxgrf
+sudo cp oxgrf_api.h /usr/local/include/
+sudo cp liboxgrf.so /usr/local/lib/
+sudo ldconfig
+```
+
+## Configuration
+
+Here is an example of the RUs configuration for a setup with OXGRF. The value **1488** in `sdr_addrs = "dev=pciex:0,auxdac1=1488"` represents the inherent frequency offset of the OXGRF board, which can be obtained directly from the physical board. Ensure you replace **1488** with the actual frequency offset value of your specific OXGRF board.
+
+```bash
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 1;
+  nb_rx          = 1;
+  att_tx         = 0;
+  att_rx         = 0;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 60;
+  eNB_instances  = [0];
+  sl_ahead       = 2;
+  # clock_src = "internal";
+  sdr_addrs = "dev=pciex:0,auxdac1=1488";
+}
+);
+```
+
+Example files can be found in the `targets/PROJECTS/GENERIC-NR-5GC/CONF/` directory with a`oxgrf` in the name, for instance[`gnb.sa.band78.fr1.273PRB.oxgrf.conf`](../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.273PRB.oxgrf.conf).
+
+## Run
+
+### gNB
+
+To launch gNB with OXGRF, use the following command:
+
+```bash
+sudo ./ran_build/build/nr-softmodem -O ../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.273PRB.oxgrf.conf
+```
+
+### UE
+
+Use the following command to start the UE with OXGRF:
+
+```bash
+sudo ./ran_build/build/nr-uesoftmodem -C 3649380000 -r 273 --numerology 1 --ssb 1472 --oxgrf-args "dev=pciex:0,auxdac1=1620" -O ../targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.conf
+```
+
+> When running the UE with OXGRF, the board's frequency offset value must be explicitly specified in the UE launch command via the `--oxgrf-args` parameter.
+
+## Uninstall
+
+```bash
+cd oxgrf_driver/XDMA/linux-kernel/xdma
+make uninstall
+```

radio/OXGRF/oxgrf_lib.h

@@ -0,0 +1,192 @@
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+#include "oxgrf_api.h"
+#include "common_lib.h"
+
+/** @addtogroup _OXGRF_PHY_RF_INTERFACE_
+ * @{
+ */
+
+typedef enum {
+    Y230,
+    Y240,
+    Y380,
+    Y390,
+    Y550,
+    Y590,
+    Y750,
+    Y790,
+    IQX6000,
+    IQX7000,
+    IQX7100,
+    IQX7200,
+    IQX7400,
+    IQX7402,  //split
+    IQX7600,
+    IQX8400,
+    IQX8800,
+    UNKNOWN = -1,
+} OXGRFBoardType;
+
+#if 0
+typedef struct {
+    OXGRFBoardType Model;
+    struct {
+        uint64_t sample_rate;
+        uint64_t bandwidth;
+        int8_t  tx_adv;
+    } tables[16];
+} oxgrf_cfg_table;
+
+oxgrf_cfg_table TABLE_IQX8x00 = { // for IQX8200 & IQX8400 & IQX8800
+    .Model = IQX8800,
+    .tables = {
+        {491520000, 400000000, 151},
+        {245760000, 200000000, 126},
+        {122880000, 100000000, 111},
+        {61440000,  40000000,  172},
+        {30720000,  20000000,  169},
+        {15360000,  10000000,  110},
+        {7680000,   5000000,   110},
+        {3840000,   3000000,   110},
+        {1920000,   1400000,   110},
+    },
+};
+
+oxgrf_cfg_table TABLE_IQX7x00 = {  // for IQX7100 & IQX7400
+    .Model = IQX7400,
+    .tables = {
+        {122880000, 100000000, 573},
+        {61440000,  40000000,  286},
+        {30720000,  20000000,  143},
+        {15360000,  10000000,   73},
+        {7680000,   5000000,    36},
+        {3840000,   3000000,    17},
+        {1920000,   1400000,    9},
+    },
+};
+
+oxgrf_cfg_table TABLE_IQX7200 = {  // for IQX7200
+    .Model = IQX7200,
+    .tables = {
+        {245760000, 200000000, 612},
+        {122880000, 100000000, 306},
+        {61440000,  40000000,  152},
+        {30720000,  20000000,   76},
+        {15360000,  10000000,   38},
+        {7680000,   5000000,    19},
+        {3840000,   3000000,    10},
+        {1920000,   1400000,     5},
+    },
+};
+
+oxgrf_cfg_table TABLE_Y590 = {  // for Y590neo
+    .Model = Y590,
+    .tables = {
+        {245760000, 200000000, 502},
+        {122880000, 100000000, 251},
+        {61440000,  40000000,  125},
+        {30720000,  20000000,   63},
+        {15360000,  10000000,   32},
+        {7680000,   5000000,    16},
+        {3840000,   3000000,     8},
+        {1920000,   1400000,     4},
+    },
+};
+
+oxgrf_cfg_table TABLE_Y790 = {  // for Y790s New/Old Version & Y750s
+    .Model = Y790,
+    .tables = {
+        {491520000, 400000000, 149},
+        {245760000, 200000000, 125},
+        {122880000, 100000000, 110},
+        {61440000,  40000000,  172},
+        {30720000,  20000000,  168},
+    },
+};
+
+oxgrf_cfg_table TABLE_Y780 = {  // for Y780s New Version
+    .Model = Y780,
+    .tables = {
+        {245760000, 200000000, 359},
+        {122880000, 100000000, 179},
+        {61440000,  40000000,   88},
+        {30720000,  20000000,   43},
+        {15360000,  10000000,   22},
+        {7680000,   5000000,    11},
+        {3840000,   3000000,     6},
+        {1920000,   1400000,     3},
+    },
+};
+
+#endif
+
+/*! \brief OXGRF specific data structure */
+typedef struct {
+
+  //! opaque OXGRF device struct. An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend)
+  OXGRF_DESCRIPTOR *dev;
+  int16_t *rx_buffer;
+  int16_t *tx_buffer;
+  //! Sample rate
+  unsigned int sample_rate;
+
+  int rx_num_channels;
+  int tx_num_channels;
+  uint64_t tx_lo_freq;
+  uint64_t rx_lo_freq;
+
+  // --------------------------------
+  // Debug and output control
+  // --------------------------------
+  //! Number of underflows
+  int num_underflows;
+  //! Number of overflows
+  int num_overflows;
+  //! number of RX errors
+  int num_rx_errors;
+  //! Number of TX errors
+  int num_tx_errors;
+
+  //! timestamp of current TX
+  uint64_t tx_current_ts;
+  //! timestamp of current RX
+  uint64_t rx_current_ts;
+  //! number of TX samples
+  uint64_t tx_nsamps;
+  //! number of RX samples
+  uint64_t rx_nsamps;
+  //! number of TX count
+  uint64_t tx_count;
+  //! number of RX count
+  uint64_t rx_count;
+  //! timestamp of RX packet
+  openair0_timestamp rx_timestamp;
+  OXGRFBoardType BoardType;
+} oxgrf_state_t;
+
+/*! \brief get current timestamp
+ *\param device the hardware to use
+ */
+openair0_timestamp trx_get_timestamp(openair0_device *device);
+
+/*@}*/

radio/OXGRF/rf_helper.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright 2013-2020 Software Radio Systems Limited
+ *
+ * This file is part of srsLTE.
+ *
+ * srsLTE is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Affero General Public License as
+ * published by the Free Software Foundation, either version 3 of
+ * the License, or (at your option) any later version.
+ *
+ * srsLTE is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Affero General Public License for more details.
+ *
+ * A copy of the GNU Affero General Public License can be found in
+ * the LICENSE file in the top-level directory of this distribution
+ * and at http://www.gnu.org/licenses/.
+ *
+ */
+#ifndef OXGRF_RF_HELPER_H_
+#define OXGRF_RF_HELPER_H_
+
+// A bunch of helper functions to process device arguments
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#define REMOVE_SUBSTRING_WITHCOMAS(S, TOREMOVE)                                                                        \
+  remove_substring(S, TOREMOVE ",");                                                                                   \
+  remove_substring(S, TOREMOVE ", ");                                                                                  \
+  remove_substring(S, "," TOREMOVE);                                                                                   \
+  remove_substring(S, ", " TOREMOVE);                                                                                  \
+  remove_substring(S, TOREMOVE)
+
+static inline void remove_substring(char* s, const char* toremove)
+{
+  while ((s = strstr(s, toremove))) {
+    memmove(s, s + strlen(toremove), 1 + strlen(s + strlen(toremove)));
+  }
+}
+
+static inline void copy_subdev_string(char* dst, char* src)
+{
+  int n   = 0;
+  int len = (int)strlen(src);
+  /* Copy until end of string or comma */
+  while (n < len && src[n] != '\0' && src[n] != ',') {
+    dst[n] = src[n];
+    n++;
+  }
+  dst[n] = '\0';
+}
+
+#endif /* OXGRF_RF_HELPER_H_ */

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.100PRB.oxgrf.conf

@@ -0,0 +1,213 @@
+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+
+    plmn_list = ( { mcc = 001; mnc = 01; mnc_length = 2; } );
+
+       ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                                         = "eNodeB_3GPP";
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
+        frame_type                                            = "TDD";
+        tdd_config                                            = 1;
+        tdd_config_s                                          = 0;
+        prefix_type                                           = "NORMAL";
+        eutra_band                                            = 38;
+        downlink_frequency                                    = 2600000000L;
+        uplink_frequency_offset                               = 0;
+        Nid_cell                                              = 0;
+        N_RB_DL                                               = 100;
+        Nid_cell_mbsfn                                        = 0;
+        nb_antenna_ports                                      = 1;
+        nb_antennas_tx                                        = 1;
+        nb_antennas_rx                                        = 1;
+        tx_gain                                               = 90;
+        rx_gain                                               = 102;
+        prach_root                                            = 0;
+        prach_config_index                                    = 0;
+        prach_high_speed                                      = "DISABLE";
+        prach_zero_correlation                                = 1;
+        prach_freq_offset                                     = 2;
+        pucch_delta_shift                                     = 1;
+        pucch_nRB_CQI                                         = 1;
+        pucch_nCS_AN                                          = 0;
+        pucch_n1_AN                                           = 0;
+        pdsch_referenceSignalPower                            = -16;
+        pdsch_p_b                                             = 0;
+        pusch_n_SB                                            = 1;
+        pusch_enable64QAM                                     = "DISABLE";
+        pusch_hoppingMode                                     = "interSubFrame";
+        pusch_hoppingOffset                                   = 0;
+        pusch_groupHoppingEnabled                             = "ENABLE";
+        pusch_groupAssignment                                 = 0;
+        pusch_sequenceHoppingEnabled                          = "DISABLE";
+        pusch_nDMRS1                                          = 1;
+        phich_duration                                        = "NORMAL";
+        phich_resource                                        = "ONESIXTH";
+        srs_enable                                            = "DISABLE";
+      /*  srs_BandwidthConfig                                   =;
+        srs_SubframeConfig                                    =;
+        srs_ackNackST                                         =;
+        srs_MaxUpPts                                          =;*/
+
+        pusch_p0_Nominal                                      = -90;
+        pusch_alpha                                           = "AL1";
+        pucch_p0_Nominal                                      = -108;
+        msg3_delta_Preamble                                   = 6;
+        pucch_deltaF_Format1                                  = "deltaF2";
+        pucch_deltaF_Format1b                                 = "deltaF3";
+        pucch_deltaF_Format2                                  = "deltaF0";
+        pucch_deltaF_Format2a                                 = "deltaF0";
+        pucch_deltaF_Format2b                                 = "deltaF0";
+
+        rach_numberOfRA_Preambles                             = 64;
+        rach_preamblesGroupAConfig                            = "DISABLE";
+      /*
+        rach_sizeOfRA_PreamblesGroupA                         = ;
+        rach_messageSizeGroupA                                = ;
+        rach_messagePowerOffsetGroupB                         = ;
+      */
+        rach_powerRampingStep                                 = 4;
+        rach_preambleInitialReceivedTargetPower               = -108;
+        rach_preambleTransMax                                 = 10;
+        rach_raResponseWindowSize                             = 10;
+        rach_macContentionResolutionTimer                     = 48;
+        rach_maxHARQ_Msg3Tx                                   = 4;
+
+        pcch_default_PagingCycle                              = 128;
+        pcch_nB                                               = "oneT";
+        bcch_modificationPeriodCoeff                          = 2;
+        ue_TimersAndConstants_t300                            = 1000;
+        ue_TimersAndConstants_t301                            = 1000;
+        ue_TimersAndConstants_t310                            = 1000;
+        ue_TimersAndConstants_t311                            = 10000;
+        ue_TimersAndConstants_n310                            = 20;
+        ue_TimersAndConstants_n311                            = 1;
+
+        ue_TransmissionMode                                   = 1;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    ////////// MME parameters:
+    mme_ip_address = ({ ipv4 = "127.0.1.100"; });
+
+    enable_measurement_reports = "no";
+
+    ///X2
+    enable_x2 = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES :
+    {
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.1/24";
+
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.1/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.1/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+        {
+           num_cc = 1;
+           tr_s_preference = "local_L1";
+           tr_n_preference = "local_RRC";
+           puSch10xSnr     =  200;
+           puCch10xSnr     =  200;
+        }
+);
+
+L1s = (
+        {
+           num_cc = 1;
+           tr_n_preference = "local_mac";
+        }
+);
+
+RUs = (
+    {
+         local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 3;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 85;
+         eNB_instances  = [0];
+         sdr_addrs = "dev=pciex:0,auxdac1=1620";
+         clock_src = "internal";
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config :
+{
+   global_log_level                      ="info";
+   hw_log_level                          ="info";
+   phy_log_level                         ="info";
+   mac_log_level                         ="info";
+   rlc_log_level                         ="info";
+   pdcp_log_level                        ="info";
+   rrc_log_level                         ="info";
+};

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band40.tm1.100PRB.oxgrf.conf

@@ -0,0 +1,213 @@
+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+
+    plmn_list = ( { mcc = 001; mnc = 01; mnc_length = 2; } );
+
+       ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                                         = "eNodeB_3GPP";
+        node_timing                                           = "synch_to_ext_device";
+        node_synch_ref                                        = 0;
+        frame_type                                            = "TDD";
+        tdd_config                                            = 1;
+        tdd_config_s                                          = 0;
+        prefix_type                                           = "NORMAL";
+        eutra_band                                            = 40;
+        downlink_frequency                                    = 2350000000L;
+        uplink_frequency_offset                               = 0;
+        Nid_cell                                              = 0;
+        N_RB_DL                                               = 50;
+        Nid_cell_mbsfn                                        = 0;
+        nb_antenna_ports                                      = 1;
+        nb_antennas_tx                                        = 1;
+        nb_antennas_rx                                        = 1;
+        tx_gain                                               = 90;
+        rx_gain                                               = 102;
+        pbch_repetition                                       = "FALSE";
+        prach_root                                            = 0;
+        prach_config_index                                    = 0;
+        prach_high_speed                                      = "DISABLE";
+        prach_zero_correlation                                = 1;
+        prach_freq_offset                                     = 2;
+        pucch_delta_shift                                     = 1;
+        pucch_nRB_CQI                                         = 1;
+        pucch_nCS_AN                                          = 0;
+        pucch_n1_AN                                           = 0;
+        pdsch_referenceSignalPower                            = -20;
+        pdsch_p_b                                             = 0;
+        pusch_n_SB                                            = 1;
+        pusch_enable64QAM                                     = "DISABLE";
+        pusch_hoppingMode                                     = "interSubFrame";
+        pusch_hoppingOffset                                   = 0;
+        pusch_groupHoppingEnabled                             = "ENABLE";
+        pusch_groupAssignment                                 = 0;
+        pusch_sequenceHoppingEnabled                          = "DISABLE";
+        pusch_nDMRS1                                          = 1;
+        phich_duration                                        = "NORMAL";
+        phich_resource                                        = "ONESIXTH";
+        srs_enable                                            = "DISABLE";
+      /*  srs_BandwidthConfig                                   =;
+        srs_SubframeConfig                                    =;
+        srs_ackNackST                                         =;
+        srs_MaxUpPts                                          =;*/
+
+        pusch_p0_Nominal                                      = -104;
+        pusch_alpha                                           = "AL1";
+        pucch_p0_Nominal                                      = -96;
+        msg3_delta_Preamble                                   = 6;
+        pucch_deltaF_Format1                                  = "deltaF2";
+        pucch_deltaF_Format1b                                 = "deltaF3";
+        pucch_deltaF_Format2                                  = "deltaF0";
+        pucch_deltaF_Format2a                                 = "deltaF0";
+        pucch_deltaF_Format2b                                 = "deltaF0";
+
+        rach_numberOfRA_Preambles                             = 64;
+        rach_preamblesGroupAConfig                            = "DISABLE";
+      /*
+        rach_sizeOfRA_PreamblesGroupA                         = ;
+        rach_messageSizeGroupA                                = ;
+        rach_messagePowerOffsetGroupB                         = ;
+      */
+        rach_powerRampingStep                                 = 4;
+        rach_preambleInitialReceivedTargetPower               = -108;
+        rach_preambleTransMax                                 = 10;
+        rach_raResponseWindowSize                             = 10;
+        rach_macContentionResolutionTimer                     = 48;
+        rach_maxHARQ_Msg3Tx                                   = 4;
+
+        pcch_default_PagingCycle                              = 128;
+        pcch_nB                                               = "oneT";
+        bcch_modificationPeriodCoeff                          = 2;
+        ue_TimersAndConstants_t300                            = 1000;
+        ue_TimersAndConstants_t301                            = 1000;
+        ue_TimersAndConstants_t310                            = 1000;
+        ue_TimersAndConstants_t311                            = 10000;
+        ue_TimersAndConstants_n310                            = 20;
+        ue_TimersAndConstants_n311                            = 1;
+        ue_TransmissionMode                                   = 1;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    ////////// MME parameters:
+    mme_ip_address = ({ ipv4 = "127.0.1.100"; });
+
+    enable_measurement_reports = "no";
+
+    ///X2
+    enable_x2 = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES :
+    {
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.1/24";
+
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.1/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.0.1/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+        {
+           num_cc = 1;
+           tr_s_preference = "local_L1";
+           tr_n_preference = "local_RRC";
+           puSch10xSnr     =  200;
+           puCch10xSnr     =  200;
+        }
+);
+
+L1s = (
+        {
+           num_cc = 1;
+           tr_n_preference = "local_mac";
+        }
+);
+
+RUs = (
+    {
+         local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 5
+         att_rx         = 0;
+         bands          = [40];
+         max_pdschReferenceSignalPower = -20;
+         max_rxgain                    = 82;
+         eNB_instances  = [0];
+         sdr_addrs = "dev=pciex:0,auxdac1=1660";
+         clock_src = "internal";
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+log_config :
+{
+   global_log_level                      ="info";
+   hw_log_level                          ="info";
+   phy_log_level                         ="info";
+   mac_log_level                         ="info";
+   rlc_log_level                         ="info";
+   pdcp_log_level                        ="info";
+   rrc_log_level                         ="info";
+};

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.nsa.oxgrf.conf

@@ -0,0 +1,262 @@
+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+
+    plmn_list = ( { mcc = 001; mnc = 01; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function                                      = "eNodeB_3GPP";
+      node_timing                                        = "synch_to_ext_device";
+      node_synch_ref                                     = 0;
+      frame_type                                         = "FDD";
+      tdd_config                                         = 3;
+      tdd_config_s                                       = 0;
+      prefix_type                                        = "NORMAL";
+      eutra_band                                         = 7;
+      downlink_frequency                                 = 2680000000L;
+      uplink_frequency_offset                            = -120000000;
+      Nid_cell                                           = 0;
+      N_RB_DL                                            = 100;
+      Nid_cell_mbsfn                                     = 0;
+      nb_antenna_ports                                   = 1;
+      nb_antennas_tx                                     = 1;
+      nb_antennas_rx                                     = 1;
+      tx_gain                                            = 89;
+      rx_gain                                            = 102;
+      pbch_repetition                                    = "FALSE";
+      prach_root                                         = 0;
+      prach_config_index                                 = 0;
+      prach_high_speed                                   = "DISABLE";
+      prach_zero_correlation                             = 1;
+      prach_freq_offset                                  = 2;
+      pucch_delta_shift                                  = 1;
+      pucch_nRB_CQI                                      = 1;
+      pucch_nCS_AN                                       = 0;
+      pucch_n1_AN                                        = 0;
+      pdsch_referenceSignalPower                         = -20;
+      pdsch_p_b                                          = 0;
+      pusch_n_SB                                         = 1;
+      pusch_enable64QAM                                  = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled                          = "ENABLE";
+      pusch_groupAssignment                              = 0;
+      pusch_sequenceHoppingEnabled                       = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -96;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -104;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b                              = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -94;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff                       = 2;
+      ue_TimersAndConstants_t300                         = 1000;
+      ue_TimersAndConstants_t301                         = 1000;
+      ue_TimersAndConstants_t310                         = 1000;
+      ue_TimersAndConstants_t311                         = 10000;
+      ue_TimersAndConstants_n310                         = 20;
+      ue_TimersAndConstants_n311                         = 1;
+      ue_TransmissionMode                                = 1;
+
+      //Parameters for SIB18
+      rxPool_sc_CP_Len                                       = "normal";
+      rxPool_sc_Period                                       = "sf40";
+      rxPool_data_CP_Len                                     = "normal";
+      rxPool_ResourceConfig_prb_Num                          = 20;
+      rxPool_ResourceConfig_prb_Start                        = 5;
+      rxPool_ResourceConfig_prb_End                          = 44;
+      rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+      rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+      rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+      rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+/*    rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+      rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+      rxPool_dataHoppingConfig_rbOffset                               = 0;
+      rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+*/
+      // Parameters for SIB19
+      discRxPool_cp_Len                                               = "normal"
+      discRxPool_discPeriod                                           = "rf32"
+      discRxPool_numRetx                                              = 1;
+      discRxPool_numRepetition                                        = 2;
+      discRxPool_ResourceConfig_prb_Num                               = 5;
+      discRxPool_ResourceConfig_prb_Start                             = 3;
+      discRxPool_ResourceConfig_prb_End                               = 21;
+      discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+      discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+      discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+      discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ({ ipv4       = "127.0.1.100"; });
+
+    enable_measurement_reports = "no";
+
+    ///X2
+    enable_x2         = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES :
+    {
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.1.1/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.1.1/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "127.0.1.1/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+  {
+     num_cc = 1;
+     tr_s_preference = "local_L1";
+     tr_n_preference = "local_RRC";
+     phy_test_mode   = 0;
+     puSch10xSnr     = 200;
+     puCch10xSnr     = 200;
+  }
+);
+
+L1s = (
+  {
+     num_cc = 1;
+     tr_n_preference = "local_mac";
+  }
+);
+
+RUs = (
+  {
+     local_rf       = "yes"
+     nb_tx          = 1
+     nb_rx          = 1
+     att_tx         = 0
+     att_rx         = 0;
+     bands          = [7];
+     max_pdschReferenceSignalPower = -20;
+     max_rxgain                    = 83;
+     eNB_instances  = [0];
+     sdr_addrs = "dev=pciex:0,auxdac1=1620";
+     clock_src = "internal";
+
+  }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+/*
+#example config for rfsimulator
+rfsimulator :
+{
+   serveraddr = "enb";
+   serverport = 4043;
+   options = ("saviq");
+   modelname = "AWGN";
+   IQfile = "/tmp/rfsimulator.iqs";
+};
+*/
+
+log_config :
+{
+   global_log_level                      ="info";
+   hw_log_level                          ="info";
+   phy_log_level                         ="info";
+   mac_log_level                         ="info";
+   rlc_log_level                         ="info";
+   pdcp_log_level                        ="info";
+   rrc_log_level                         ="info";
+};

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.oxgrf.conf

@@ -0,0 +1,215 @@
+Active_eNBs = ( "eNB_Eurecom_LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+ {
+    ////////// Identification parameters:
+    eNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_ENB";
+
+    eNB_name  =  "eNB_Eurecom_LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+
+    plmn_list = ( { mcc = 001; mnc = 01; mnc_length = 2; } );
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+      node_function                                      = "eNodeB_3GPP";
+      node_timing                                        = "synch_to_ext_device";
+      node_synch_ref                                     = 0;
+      frame_type                                         = "FDD";
+      tdd_config                                         = 3;
+      tdd_config_s                                       = 0;
+      prefix_type                                        = "NORMAL";
+      eutra_band                                         = 7;
+      downlink_frequency                                 = 2680000000L;
+      uplink_frequency_offset                            = -120000000;
+      Nid_cell                                           = 0;
+      N_RB_DL                                            = 100;
+      Nid_cell_mbsfn                                     = 0;
+      nb_antenna_ports                                   = 1;
+      nb_antennas_tx                                     = 1;
+      nb_antennas_rx                                     = 1;
+      tx_gain                                            = 90;
+      rx_gain                                            = 102;
+      pbch_repetition                                    = "FALSE";
+      prach_root                                         = 0;
+      prach_config_index                                 = 0;
+      prach_high_speed                                   = "DISABLE";
+      prach_zero_correlation                             = 1;
+      prach_freq_offset                                  = 2;
+      pucch_delta_shift                                  = 1;
+      pucch_nRB_CQI                                      = 1;
+      pucch_nCS_AN                                       = 0;
+      pucch_n1_AN                                        = 0;
+      pdsch_referenceSignalPower                         = -20;
+      pdsch_p_b                                          = 0;
+      pusch_n_SB                                         = 1;
+      pusch_enable64QAM                                  = "DISABLE";
+      pusch_hoppingMode                                  = "interSubFrame";
+      pusch_hoppingOffset                                = 0;
+      pusch_groupHoppingEnabled                          = "ENABLE";
+      pusch_groupAssignment                              = 0;
+      pusch_sequenceHoppingEnabled                       = "DISABLE";
+      pusch_nDMRS1                                       = 1;
+      phich_duration                                     = "NORMAL";
+      phich_resource                                     = "ONESIXTH";
+      srs_enable                                         = "DISABLE";
+      /*  srs_BandwidthConfig                                =;
+      srs_SubframeConfig                                 =;
+      srs_ackNackST                                      =;
+      srs_MaxUpPts                                       =;*/
+
+      pusch_p0_Nominal                                   = -76;
+      pusch_alpha                                        = "AL1";
+      pucch_p0_Nominal                                   = -96;
+      msg3_delta_Preamble                                = 6;
+      pucch_deltaF_Format1                               = "deltaF2";
+      pucch_deltaF_Format1b                              = "deltaF3";
+      pucch_deltaF_Format2                               = "deltaF0";
+      pucch_deltaF_Format2a                              = "deltaF0";
+      pucch_deltaF_Format2b                              = "deltaF0";
+
+      rach_numberOfRA_Preambles                          = 64;
+      rach_preamblesGroupAConfig                         = "DISABLE";
+      /*
+      rach_sizeOfRA_PreamblesGroupA                      = ;
+      rach_messageSizeGroupA                             = ;
+      rach_messagePowerOffsetGroupB                      = ;
+      */
+      rach_powerRampingStep                              = 4;
+      rach_preambleInitialReceivedTargetPower            = -90;
+      rach_preambleTransMax                              = 10;
+      rach_raResponseWindowSize                          = 10;
+      rach_macContentionResolutionTimer                  = 48;
+      rach_maxHARQ_Msg3Tx                                = 4;
+
+      pcch_default_PagingCycle                           = 128;
+      pcch_nB                                            = "oneT";
+      bcch_modificationPeriodCoeff                       = 2;
+      ue_TimersAndConstants_t300                         = 1000;
+      ue_TimersAndConstants_t301                         = 1000;
+      ue_TimersAndConstants_t310                         = 1000;
+      ue_TimersAndConstants_t311                         = 10000;
+      ue_TimersAndConstants_n310                         = 20;
+      ue_TimersAndConstants_n311                         = 1;
+      ue_TransmissionMode                                = 1;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+        # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+        timer_poll_retransmit    = 80;
+
+        # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+        timer_reordering         = 35;
+
+        # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+        timer_status_prohibit    = 0;
+
+        # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+        poll_pdu                 =  4;
+
+        # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+        poll_byte                =  99999;
+
+        # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+        max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address = ({ ipv4 = "192.168.0.80"; });
+
+    enable_measurement_reports = "no";
+
+    ///X2
+    enable_x2 = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+
+    NETWORK_INTERFACES :
+    {
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.0.201/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.0.201/24";
+        ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
+
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.0.201/24";
+        ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+        {
+           num_cc = 1;
+           tr_s_preference = "local_L1";
+           tr_n_preference = "local_RRC";
+           puSch10xSnr     =  250;
+           puCch10xSnr     =  250;
+        }
+);
+
+L1s = (
+        {
+           num_cc = 1;
+           tr_n_preference = "local_mac";
+        }
+);
+
+RUs = (
+    {
+         local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -20;
+         max_rxgain                    = 90;
+         eNB_instances  = [0];
+         sdr_addrs = "dev=pciex:0,auxdac1=1660";
+         clock_src = "internal";
+    }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       hw_log_level                          ="info";
+       phy_log_level                         ="info";
+       mac_log_level                         ="info";
+       rlc_log_level                         ="info";
+       pdcp_log_level                        ="info";
+       rrc_log_level                         ="info";
+    };

targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.nsa.oxgrf.conf

@@ -0,0 +1,249 @@
+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 001; mnc = 01; mnc_length = 2;});
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 641272; //641032;      #641968; 641968=start of ssb at 3600MHz + 82 RBs    641032=center of SSB at center of cell
+      dl_frequencyBand                                              = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                    = 640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                           = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                        = 1;
+        dl_carrierBandwidth                                         = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=84,L=13 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                            = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                               = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                          = 0;
+        initialDLBWPsearchSpaceZero                                 = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 6368;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -100;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#0 = 839, 1 = 139
+        prach_RootSequenceIndex_PR                                  = 1;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ({ ipv4       = "127.0.1.100"; });
+
+    ///X2
+    enable_x2         = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "127.0.1.1";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "127.0.1.2/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "127.0.1.2/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "127.0.1.2/24";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc = 1;
+    tr_s_preference = "local_L1";
+    tr_n_preference = "local_RRC";
+  }
+);
+
+L1s = (
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs = (
+  {
+    local_rf       = "yes"
+    nb_tx          = 1
+    nb_rx          = 1
+    att_tx         = 0
+    att_rx         = 0;
+    bands          = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 102;
+    eNB_instances  = [0];
+    sdr_addrs = "dev=pciex:1,auxdac1=1620";
+    clock_src = "external";
+  }
+);
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-cu.sa.f1.oxgrf.conf

@@ -0,0 +1,73 @@
+Active_gNBs = ( "cu-oxgrf");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID = 0xe00;
+    gNB_name  =  "cu-oxgrf";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    @include "neighbour-config-ho.conf"
+
+    nr_cellid = 12345678L;
+
+    tr_s_preference = "f1";
+
+    local_s_address     = "127.0.0.3";
+    #local_s_address     = "192.168.0.203";
+    remote_s_address    = "0.0.0.0"; # multiple DUs
+    local_s_portd       = 2152;
+    remote_s_portd      = 2152;
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address = ({ ipv4 = "127.0.1.100"; });
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "127.0.1.1/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "127.0.1.1/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config : {
+  global_log_level = "info";
+  pdcp_log_level = "info";
+  rrc_log_level = "info";
+  f1ap_log_level = "info";
+  ngap_log_level = "info";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-du.sa.band78.106prb.oxgrf.pci0.conf

@@ -0,0 +1,206 @@
+Active_gNBs = ( "du-oxgrf");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID = 0xe00;
+    gNB_DU_ID = 0xe00;
+    gNB_name  =  "du-oxgrf";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    min_rxtxtime = 4;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                               = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                      = 643200;
+      dl_frequencyBand                                          = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                = 640016;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                       = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                    = 1;
+        dl_carrierBandwidth                                     = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                         = 28875; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                             = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                        = 12;
+        initialDLBWPsearchSpaceZero                               = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                             = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                            = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                         = 1;
+      ul_carrierBandwidth                                          = 106;
+      pMax                                                         = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                           = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                              = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                 = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                           = 0;
+          prach_msg1_FrequencyStart                                = 0;
+          zeroCorrelationZoneConfig                                = 13;
+          preambleReceivedTargetPower                              = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                         = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                           = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR               = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                  = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                               = 7;
+        rsrp_ThresholdSSB                                          = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                 = 2;
+        prach_RootSequenceIndex                                    = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                     = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                        = 0,
+
+        msg3_DeltaPreamble                                         = 1;
+        p0_NominalWithGrant                                        =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                          = 0;
+        hoppingId                                                  = 40;
+        p0_nominal                                                 = -90;
+
+      ssb_PositionsInBurst_Bitmap                                  = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                   = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                            = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                   = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                = 6;
+      nrofDownlinkSlots                                            = 7;
+      nrofDownlinkSymbols                                          = 6;
+      nrofUplinkSlots                                              = 2;
+      nrofUplinkSymbols                                            = 4;
+
+      ssPBCH_BlockPower                                            = -25;
+     }
+
+  );
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+  }
+);
+
+MACRLCs = ({
+    num_cc              = 1;
+    tr_s_preference     = "local_L1";
+    tr_n_preference     = "f1";
+    local_n_address     = "127.0.0.4";
+    remote_n_address    = "127.0.0.3";
+    local_n_portd       = 2152;
+    remote_n_portd      = 2152;
+    pusch_FailureThres  = 1000;
+});
+
+L1s = ({
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+    prach_dtx_threshold = 200;
+    pucch0_dtx_threshold = 150;
+    ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
+});
+
+RUs = ({
+    local_rf       = "yes"
+    nb_tx          = 1
+    nb_rx          = 1
+    att_tx         = 0
+    att_rx         = 0;
+    bands          = [78];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 114;
+    eNB_instances  = [0];
+    clock_src = "internal";
+});
+
+rfsimulator: {
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs"
+}
+
+log_config: {
+  global_log_level = "info";
+  hw_log_level     = "info";
+  nr_phy_log_level = "info";
+  nr_mac_log_level = "info";
+  rlc_log_level    = "info";
+  pdcp_log_level   = "info";
+  rrc_log_level    = "info";
+  f1ap_log_level   = "info";
+  ngap_log_level   = "debug";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band257.u3.132prb.oxgrf.conf

@@ -0,0 +1,250 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+sa = 1;
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP                                     = 1;
+    pusch_AntennaPorts                                        = 1;
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+    min_rxtxtime                                              = 8;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # This is 27999.840 MHz (GSCN: 22473)
+      absoluteFrequencySSB                                             = 2079163;
+      dl_frequencyBand                                                 = 257;
+      # This is 27952.560 MHz
+      dl_absoluteFrequencyPointA                                       = 2077583;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 3;
+        dl_carrierBandwidth                                            = 132;
+     #initialDownlinkBWP
+      #genericParameters
+        # This is RBstart = 0, L = 32: (275 * (L - 1)) + RBstart
+        initialDLBWPlocationAndBandwidth                               = 36025;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                  = 3;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                             = 0;
+        initialDLBWPsearchSpaceZero                                    = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 257;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 3;
+      ul_carrierBandwidth                                           = 132;
+      pMax                                                          = 10;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 36025;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 3;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 59;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -110;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 3;
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         = -84;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -96;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 3;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 3;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 3;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address = ({ ipv4 = "127.0.0.5"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "127.0.1.100/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "127.0.1.100/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  #pusch_TargetSNRx10         = 300;
+  #pucch_TargetSNRx10         = 200;
+}
+);
+
+L1s = (
+{
+  num_cc                = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  #pucch0_dtx_threshold = 120;
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes";
+  nb_tx          = 1;
+  nb_rx          = 1;
+  att_tx         = 0;
+  att_rx         = 0;
+  #sl_ahead       = 12;
+  bands          = [257];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 60;
+  eNB_instances  = [0];
+  #if_freq        = 3649380000L;
+  if_freq        = 3500080000L;
+  clock_src = "internal";
+  sdr_addrs = "dev=pciex:0,auxdac1=1660";
+}
+);
+
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="info";
+  f1ap_log_level                        ="info";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band257.u3.32prb.oxgrf.conf

@@ -0,0 +1,249 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+sa = 1;
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP                                     = 1;
+    pusch_AntennaPorts                                        = 1;
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+    min_rxtxtime                                              = 6;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # This is 27510.240 MHz + 16 * 12 * 120e3 MHz = 27533.280 MHz (GSCN: 22446)
+      absoluteFrequencySSB                                             = 2071387;
+      dl_frequencyBand                                                 = 257;
+      # This is 27510.240 MHz
+      dl_absoluteFrequencyPointA                                       = 2071003;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 3;
+        dl_carrierBandwidth                                            = 32;
+     #initialDownlinkBWP
+      #genericParameters
+        # This is RBstart = 0, L = 32: (275 * (L - 1)) + RBstart
+        initialDLBWPlocationAndBandwidth                               = 8525;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                  = 3;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                             = 0;
+        initialDLBWPsearchSpaceZero                                    = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 257;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 3;
+      ul_carrierBandwidth                                           = 32;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 8525;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 3;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 59;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 3;
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -70;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 3;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 3;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 3;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -10; #IQX7400
+  }
+
+  );
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address = ({ ipv4 = "192.168.0.80"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.0.201/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.0.201/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  #pusch_TargetSNRx10         = 150;
+  #pucch_TargetSNRx10         = 200;
+}
+);
+
+L1s = (
+{
+  num_cc                = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  #pucch0_dtx_threshold = 120;
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes";
+  nb_tx          = 1;
+  nb_rx          = 1;
+  att_tx         = 0;
+  att_rx         = 0;
+  #sl_ahead       = 12;
+  bands          = [257];
+  max_pdschReferenceSignalPower = -10;
+  max_rxgain                    = 102;
+  eNB_instances  = [0];
+  if_freq        = 3000280000L;
+  clock_src = "internal";
+  sdr_addrs = "dev=pciex:0,auxdac1=1660";
+}
+);
+
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="info";
+  f1ap_log_level                        ="info";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band257.u3.66prb.oxgrf.conf

@@ -0,0 +1,250 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+sa = 1;
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP                                     = 1;
+    pusch_AntennaPorts                                        = 1;
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+    min_rxtxtime                                              = 8;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # This is 27999.840 MHz (GSCN: 22473)
+      absoluteFrequencySSB                                             = 2079163;
+      dl_frequencyBand                                                 = 257;
+      # This is 27952.560 MHz
+      dl_absoluteFrequencyPointA                                       = 2078375;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 3;
+        dl_carrierBandwidth                                            = 66;
+     #initialDownlinkBWP
+      #genericParameters
+        # This is RBstart = 0, L = 32: (275 * (L - 1)) + RBstart
+        initialDLBWPlocationAndBandwidth                               = 17875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                  = 3;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                             = 0;
+        initialDLBWPsearchSpaceZero                                    = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 257;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 3;
+      ul_carrierBandwidth                                           = 66;
+      pMax                                                          = 10;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 17875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 3;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 59;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -110;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 3;
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         = -84;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -96;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 3;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 3;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 1;
+      nrofDownlinkSlots                                             = 3;
+      nrofDownlinkSymbols                                           = 10;
+      nrofUplinkSlots                                               = 1;
+      nrofUplinkSymbols                                             = 2;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address = ({ ipv4 = "127.0.0.5"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "127.0.1.100/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "127.0.1.100/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  #pusch_TargetSNRx10         = 300;
+  #pucch_TargetSNRx10         = 200;
+}
+);
+
+L1s = (
+{
+  num_cc                = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  #pucch0_dtx_threshold = 120;
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes";
+  nb_tx          = 1;
+  nb_rx          = 1;
+  att_tx         = 0;
+  att_rx         = 0;
+  #sl_ahead       = 12;
+  bands          = [257];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 60;
+  eNB_instances  = [0];
+  #if_freq        = 3649380000L;
+  if_freq        = 3500080000L;
+  clock_src = "internal";
+  sdr_addrs = "dev=pciex:0,auxdac1=1660";
+}
+);
+
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="info";
+  f1ap_log_level                        ="info";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band41.fr1.52PRB.oxgrf.y230.conf

@@ -0,0 +1,254 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+    min_rxtxtime                                              = 6;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 2574.270 MHz + 53 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                             = 518670;
+      dl_frequencyBand                                                 = 41;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 517734;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 0;
+        dl_carrierBandwidth                                            = 52;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=106 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 14025; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 0;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 6;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 41;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 0;
+      ul_carrierBandwidth                                           = 52;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 14025;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 0;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 0,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 0;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 0;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 7;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address = ({ ipv4 = "192.168.0.80"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.0.201/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.0.201/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  pusch_TargetSNRx10          = 250;
+  pucch_TargetSNRx10          = 300;
+  pusch_FailureThres          = 1000;
+}
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference       = "local_mac";
+  pusch_proc_threads    = 8;
+  prach_dtx_threshold   = 120;
+  pucch0_dtx_threshold  = 150;
+  ofdm_offset_divisor   = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 1
+  nb_rx          = 1
+  att_tx         = 0;
+  att_rx         = 0;
+  bands          = [41];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 102;
+  eNB_instances  = [0];
+  sdr_addrs = "dev=usb3:0,auxdac1=1960";
+  clock_src = "internal";
+}
+);
+
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  global_log_verbosity                  ="medium";
+  hw_log_level                          ="info";
+  hw_log_verbosity                      ="medium";
+  phy_log_level                         ="info";
+  phy_log_verbosity                     ="medium";
+  mac_log_level                         ="info";
+  mac_log_verbosity                     ="high";
+  rlc_log_level                         ="info";
+  rlc_log_verbosity                     ="medium";
+  pdcp_log_level                        ="info";
+  pdcp_log_verbosity                    ="medium";
+  rrc_log_level                         ="info";
+  rrc_log_verbosity                     ="medium";
+  ngap_log_level                        ="debug";
+  ngap_log_verbosity                    ="medium";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.2x2.oxgrf.conf

@@ -0,0 +1,247 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP                                     = 2;
+    pusch_AntennaPorts                                        = 2;
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
+      absoluteFrequencySSB                                             = 621312; # 641280
+      dl_frequencyBand                                                 = 78;
+      # this is 3300.60 MHz
+      dl_absoluteFrequencyPointA                                       = 620040; # 640008
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                  = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                             = 12;
+        initialDLBWPsearchSpaceZero                                    = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -70;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address = ({ ipv4 = "192.168.70.132"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.70.129/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.70.129/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  pusch_TargetSNRx10          = 150;
+  pucch_TargetSNRx10          = 200;
+  pusch_FailureThres          = 1000;
+}
+);
+
+L1s = (
+{
+  num_cc                = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  pucch0_dtx_threshold  = 100;
+  ofdm_offset_divisor   = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 2
+  nb_rx          = 2
+  att_tx         = 0
+  att_rx         = 0;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 102;
+  eNB_instances  = [0];
+  clock_src = "internal";
+  sdr_addrs = "dev=pciex:0,auxdac1=1630";
+}
+);
+
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="debug";
+  f1ap_log_level                        ="debug";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.oxgrf.conf

@@ -0,0 +1,245 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                             = 641280;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640008;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 12;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address = ({ ipv4 = "192.168.70.132"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.70.129/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.70.129/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  pusch_TargetSNRx10          = 150;
+  pucch_TargetSNRx10          = 200;
+  pusch_FailureThres          = 1000;
+}
+);
+
+L1s = (
+{
+  num_cc = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  pucch0_dtx_threshold  = 100;
+  ofdm_offset_divisor   = 8; #set this to UINT_MAX for offset 0
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 1
+  nb_rx          = 1
+  att_tx         = 0;
+  att_rx         = 0;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 102;
+  eNB_instances  = [0];
+  sdr_addrs = "dev=pciex:0,auxdac1=1660";
+  clock_src = "internal";
+}
+);
+
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="debug";
+  f1ap_log_level                        ="debug";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.273PRB.2x2.oxgrf.conf

@@ -0,0 +1,245 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1; }); });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP                                     = 2;
+    pusch_AntennaPorts                                        = 2;
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+    ul_prbblacklist                                           = "135,136,137,138"
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3648 MHz (5G NR GSCN: 7949)
+      absoluteFrequencySSB                                          = 643200;
+      dl_frequencyBand                                              = 78;
+      # this is 3600.24 MHz
+      dl_absoluteFrequencyPointA                                    = 640016;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                           = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                        = 1;
+        dl_carrierBandwidth                                         = 273;
+     #initialDownlinkBWP
+      #genericParameters
+       initialDLBWPlocationAndBandwidth                             = 1099;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                               = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                          = 12;
+        initialDLBWPsearchSpaceZero                                 = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 273;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 1099;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -90;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         = -90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -70;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ({ ipv4       = "192.168.0.80"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.0.201/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.0.201/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  #pusch_TargetSNRx10          = 300;
+  #pucch_TargetSNRx10          = 200;
+  pusch_FailureThres          = 1000;
+}
+);
+
+L1s = (
+{
+  num_cc                = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  pucch0_dtx_threshold  = 80;
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 2;
+  nb_rx          = 2;
+  att_tx         = 0;
+  att_rx         = 0;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 60;
+  eNB_instances  = [0];
+  #clock_src = "internal";
+  sdr_addrs = "dev=pciex:0,auxdac1=1630";
+}
+);
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="debug";
+  f1ap_log_level                        ="debug";
+};

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.273PRB.oxgrf.conf

@@ -0,0 +1,248 @@
+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  100;
+    plmn_list = ({ mcc = 466; mnc = 92; mnc_length = 2; snssaiList = ({ sst = 1; }); });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP                                           = 1;
+    pusch_AntennaPorts                                              = 1;
+    do_CSIRS                                                        = 1;
+    do_SRS                                                          = 0;
+    ul_prbblacklist                                                 = "135,136,137,138"
+    min_rxtxtime                                                    = 4;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3300.24 + 134*12*30e3 = 3348.48 MHz (5G NR GSCN: 7741)
+      absoluteFrequencySSB                                          = 643200;
+      dl_frequencyBand                                              = 78;
+      # this is 3300.24 MHz
+      dl_absoluteFrequencyPointA                                    = 640016;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                           = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                        = 1;
+        dl_carrierBandwidth                                         = 273;
+     #initialDownlinkBWP
+      #genericParameters
+       initialDLBWPlocationAndBandwidth                             = 1099;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                               = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                          = 12;
+        initialDLBWPsearchSpaceZero                                 = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 273;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 1099;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -90;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#one (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         = -90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -70;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 5;
+      nrofDownlinkSlots                                             = 3;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 1;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ({ ipv4       = "172.11.200.14"; });
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "172.11.200.1/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "172.11.200.1/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+{
+  num_cc                      = 1;
+  tr_s_preference             = "local_L1";
+  tr_n_preference             = "local_RRC";
+  ulsch_max_frame_inactivity  =   0;
+  #pusch_TargetSNRx10          = 300;
+  #pucch_TargetSNRx10          = 200;
+  pusch_FailureThres          = 1000;
+}
+);
+
+L1s = (
+{
+  num_cc                = 1;
+  tr_n_preference       = "local_mac";
+  prach_dtx_threshold   = 120;
+  pucch0_dtx_threshold  = 80;
+}
+);
+
+RUs = (
+{
+  local_rf       = "yes"
+  nb_tx          = 1;
+  nb_rx          = 1;
+  att_tx         = 0;
+  att_rx         = 0;
+  bands          = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain                    = 60;
+  eNB_instances  = [0];
+  sl_ahead       = 2;
+  #clock_src = "internal";
+  sdr_addrs = "dev=pciex:0,auxdac1=1488";
+}
+);
+
+rfsimulator :
+{
+  serveraddr = "server";
+  serverport = 4043;
+  options = (); #("saviq"); or/and "chanmod"
+  modelname = "AWGN";
+  IQfile = "/tmp/rfsimulator.iqs";
+};
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="debug";
+  f1ap_log_level                        ="debug";
+};